- Freeradius-Users - lists.freeradius.org

EAP-TLS obtaining certificates email
by Piotr Janusz 17 Mar '09

17 Mar '09

Hi, I have used an outside certificate authority and have few clients that have the certicifates' subject similar to: E = user-name(a)domain.tld CN = Some-constant-text CN is constant on all certificates. Freeradius gets the User-name attribute set to CN. Any way to substitute the User-name attribute with the email? Or have it al least logged with other attributes in detailed log? Cheers, Piotr Janusz.

2 1

DNS suffix, DNS servers
by Markus Wernig 17 Mar '09

17 Mar '09

Hello again Following up on the previous thread, I am looking for a possibility to assign different DNS servers and DNS suffixes to clients based on the Unix group they are in. I have found the MS-Primary-DNS-Server and MS-Secondary-DNS-Server attribute, which I assume will control the client's DNS server assignment, but I can't make out which attribute might contain the DNS suffix the client will get sent. Is there any? kind regards Markus

2 1

MS-CHAP2 Failure
by Mike Diggins 16 Mar '09

16 Mar '09

I configured what I thought were two identical FreeRadus 2.1.3 servers. I'm attempting to do MS-CHAP2 authentication on both, one is working, the other is not. For the life of me I can't find any difference in their configuration. On my client, I switch the host name between the two servers, everything else stays the same. One works, one fails, and I don't know why. Below is the debug output for both the failure and success. PAP authentication works fine on both with the same id. What the heck have I missed? This is the one that fails: rad_recv: Access-Request packet from host 192.168.2.15 port 2357, id=26, length=127 NAS-Identifier = "test-cam1" NAS-IP-Address = 192.168.2.15 MS-CHAP-Challenge = 0xbd4261d677c0d793ee781d7a032218df MS-CHAP2-Response = 0xa300ac9567587df3e83b3799dc49a53f433000000000000000007e0e6320a093349fbd0afc94436ed32e1258e26c5463147b User-Name = "test26" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok [suffix] No '@' in User-Name = "test26", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 5 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = MSCHAP +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Told to do MS-CHAPv2 for test26 with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject Failed to authenticate the user. Login incorrect: [test26] (from client 192.168.2.15 port 0) Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> test26 attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 7 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 7 Sending Access-Reject of id 26 to 192.168.2.15 port 2357 Waking up in 4.9 seconds. Cleaning up request 7 ID 26 with timestamp +1885 Ready to process requests. This one works: rad_recv: Access-Request packet from host 192.168.2.15 port 2358, id=115, length=127 NAS-Identifier = "test-cam1" NAS-IP-Address = 192.168.2.15 MS-CHAP-Challenge = 0xfdd0ccd7059225f80093cea2929eb415 MS-CHAP2-Response = 0x780017ff811e7761fc6bd332fb45f4f6b3f50000000000000000b6834efb6626804caf2aa055c5a157851e9bc927698cf23f User-Name = "test26" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok [suffix] No '@' in User-Name = "test26", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 5 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = MSCHAP +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Told to do MS-CHAPv2 for test26 with NT-Password [mschap] expand: --username=%{mschap:User-Name:-None} -> --username=test26 [mschap] No NT-Domain was found in the User-Name. [mschap] expand: --domain=%{mschap:NT-Domain:-ap1} -> --domain=ap1 [mschap] mschap2: fd [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=cc26ba941d6d9678 [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=b6834efb6626804caf2aa055c5a157851e9bc927698cf23f Exec-Program output: NT_KEY: D3D489B13ACA7C5E93887C212EFCCB0B Exec-Program-Wait: plaintext: NT_KEY: D3D489B13ACA7C5E93887C212EFCCB0B Exec-Program: returned: 0 ++[mschap] returns ok Login OK: [test26] (from client 192.168.2.15 port 0) +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 115 to 192.168.2.15 port 2358 MS-CHAP2-Success = 0x78533d41453631324635393130344535373132364133414234374339463844443541453538384142453943 Finished request 5. Going to the next request Waking up in 4.9 seconds. Cleaning up request 5 ID 115 with timestamp +1773 Ready to process requests. -Mike

2 1

how to have freeradius/unlang do two or more SQL statements at one time
by Dave Sinclair 16 Mar '09

16 Mar '09

Hi, When Post-Auth-Type REJECT is executed I need to insert two or more rows into a SQL data base. here is what I have at present sites-enabled/default Post-Auth-Type REJECT { sql } sql.conf -> sql/mysql/dialup.conf postauth_query = "INSERT INTO ${authcheck_table} VALUES (NULL,'%{User-Name}','Password', '==', '%{User-Password:-Chap-Password}');" postauth_query = "INSERT INTO ${usergroup_table} values ('%{User-Name}','Dynamic','');" The FIRST insert runs, but the second one doesn't. mucho thanks in advance

6 8

A couple of NAS servers with same Port ID problem.
by Piero Giobbi 16 Mar '09

16 Mar '09

Hi all. This is probably a silly question but i can't solve it by myself. I have a couple of WLANS (Proxim AP4000), works great with FR but im having some accounting trouble (guessing), i get a lot of these in my log: Mon Mar 16 14:01:43 2009 : Error: rlm_radutmp: Logout entry for NAS wlan-serverummet port 9 has wrong ID Mon Mar 16 14:02:46 2009 : Error: rlm_radutmp: Logout entry for NAS wlan-konferens port 9 has wrong ID Mon Mar 16 14:02:47 2009 : Error: rlm_radutmp: Logout entry for NAS wlan-access-happy port 9 has wrong ID Mon Mar 16 14:03:02 2009 : Error: rlm_radutmp: Logout entry for NAS wlan-konferens port 9 has wrong ID One of my clients in client.conf client 10.0.4.190 { secret = xxxxx shortname = wlan-xxxx nastype = other # localhost isn't usually a NAS... } I tripplechecked the shared secret. The authentication works, clients can connect. What does rlm_radutmp do? Could i turn it off in my config (what would happened)? Should i specify different NAS-PORTS for each NAS-server? I feels like this is the problem but i can't find any info on how to do this. I glanced att the huntgroups-file but that doesn't feel like the place to solve this. I have googled for this problem but haven't found anything. OR - could it just be that Proxim AP4000 is not handling these logouts correctly, a hardware problem? Regards p

2 1

Freeradius and external programs
by M K 16 Mar '09

16 Mar '09

Hello, Can i execute an external program when authentication, authorization and accounting events occurs (different program in each case)? Thanks.

3 4

ldap authentication works on v1.1.4 but fails on 2.1.3
by Leese, MJ (Mark) 16 Mar '09

16 Mar '09

Hi, I've been successfully using FreeRADIUS 1.1.4 to authenticate users against Active Directory using LDAP and a plaintext password. In the authorize section FreeRADIUS anonymously binds to our LDAP server (Active Directory) and searches for the user identified in the Access-Request (in my case we change the default search filter to 'sAMAccountName' as our AD doesn't contain 'uid'). If a match is found I think the user's full Distinguised Name (e.g. CN=bill,DC=foo,DC=ac,DC=uk) is added to the list of check items, and Auth-Type is set to 'ldap'. In the authenticate section, FreeRADIUS binds to the LDAP server using the user's full DN and the password supplied in the Access-Request. If the bind is successful, the user is authenticated because the password must have been correct. I've recently updated a server to FreeRADIUS 2.1.3 and all authentications now fail. LDAP is not set as the authentication method during the authorize section. I don't know why as I can't seen any configuration options which I've set differently between the two versions. I still get the debug message "Info: [ldap] user <username> authorized to use remote access" in the authorize section, so this suggests that the anonymous bind and search work ok. Does any one have any ideas? Have I made a stupid configuration error, or did I miss something in the latest documentation? Thanks in advance for any help, Mark. This is the debug output for version 1.1.4... rad_recv: Access-Request packet from host 127.0.0.1:56359, id=216, length=45 User-Name = "bill" User-Password = "blahblah" Sun Mar 15 18:07:11 2009 : Debug: Processing the authorize section of radiusd.conf Sun Mar 15 18:07:11 2009 : Debug: modcall: entering group authorize for request 0 Sun Mar 15 18:07:11 2009 : Debug: modsingle[authorize]: calling preprocess (rlm_preprocess) for request 0 Sun Mar 15 18:07:11 2009 : Debug: modsingle[authorize]: returned from preprocess (rlm_preprocess) for request 0 Sun Mar 15 18:07:11 2009 : Debug: modcall[authorize]: module "preprocess" returns ok for request 0 Sun Mar 15 18:07:11 2009 : Debug: modsingle[authorize]: calling chap (rlm_chap) for request 0 Sun Mar 15 18:07:11 2009 : Debug: modsingle[authorize]: returned from chap (rlm_chap) for request 0 Sun Mar 15 18:07:11 2009 : Debug: modcall[authorize]: module "chap" returns noop for request 0 Sun Mar 15 18:07:11 2009 : Debug: modsingle[authorize]: calling mschap (rlm_mschap) for request 0 Sun Mar 15 18:07:11 2009 : Debug: modsingle[authorize]: returned from mschap (rlm_mschap) for request 0 Sun Mar 15 18:07:11 2009 : Debug: modcall[authorize]: module "mschap" returns noop for request 0 Sun Mar 15 18:07:11 2009 : Debug: modsingle[authorize]: calling digest (rlm_digest) for request 0 Sun Mar 15 18:07:11 2009 : Debug: modsingle[authorize]: returned from digest (rlm_digest) for request 0 Sun Mar 15 18:07:11 2009 : Debug: modcall[authorize]: module "digest" returns noop for request 0 Sun Mar 15 18:07:11 2009 : Debug: modsingle[authorize]: calling eap (rlm_eap) for request 0 Sun Mar 15 18:07:11 2009 : Debug: rlm_eap: No EAP-Message, not doing EAP Sun Mar 15 18:07:11 2009 : Debug: modsingle[authorize]: returned from eap (rlm_eap) for request 0 Sun Mar 15 18:07:11 2009 : Debug: modcall[authorize]: module "eap" returns noop for request 0 Sun Mar 15 18:07:11 2009 : Debug: modsingle[authorize]: calling ldap (rlm_ldap) for request 0 Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: - authorize Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: performing user authorization for bill Sun Mar 15 18:07:11 2009 : Debug: radius_xlat: '(sAMAccountName=bill)' Sun Mar 15 18:07:11 2009 : Debug: radius_xlat: 'dc=foo,dc=ac,dc=uk' Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: ldap_get_conn: Checking Id: 0 Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: ldap_get_conn: Got Id: 0 Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: attempting LDAP reconnection Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: (re)connect to ad.foo.ac.uk:389, authentication 0 Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: bind as / to ad.foo.ac.uk:389 Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: waiting for bind result ... Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: Bind was successful Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: performing search in dc=foo,dc=ac,dc=uk, with filter (sAMAccountName=bill) Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: looking for check items in directory... Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: looking for reply items in directory... Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: Setting Auth-Type = ldap Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: user bill authorized to use remote access Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: ldap_release_conn: Release Id: 0 Sun Mar 15 18:07:11 2009 : Debug: modsingle[authorize]: returned from ldap (rlm_ldap) for request 0 Sun Mar 15 18:07:11 2009 : Debug: modcall[authorize]: module "ldap" returns ok for request 0 Sun Mar 15 18:07:11 2009 : Debug: modsingle[authorize]: calling pap (rlm_pap) for request 0 Sun Mar 15 18:07:11 2009 : Debug: rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. Sun Mar 15 18:07:11 2009 : Debug: modsingle[authorize]: returned from pap (rlm_pap) for request 0 Sun Mar 15 18:07:11 2009 : Debug: modcall[authorize]: module "pap" returns noop for request 0 Sun Mar 15 18:07:11 2009 : Debug: modcall: leaving group authorize (returns ok) for request 0 Sun Mar 15 18:07:11 2009 : Debug: rad_check_password: Found Auth-Type ldap Sun Mar 15 18:07:11 2009 : Debug: auth: type "LDAP" Sun Mar 15 18:07:11 2009 : Debug: Processing the authenticate section of radiusd.conf Sun Mar 15 18:07:11 2009 : Debug: modcall: entering group LDAP for request 0 Sun Mar 15 18:07:11 2009 : Debug: modsingle[authenticate]: calling ldap (rlm_ldap) for request 0 Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: - authenticate Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: login attempt by "bill" with password "blahblah" Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: user DN: CN=bill,dc=foo,dc=ac,dc=uk Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: (re)connect to ad.foo.ac.uk:389, authentication 1 Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: bind as CN=bill,dc=foo,dc=ac,dc=uk/blahblah to ad.foo.ac.uk:389 Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: waiting for bind result ... Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: Bind was successful Sun Mar 15 18:07:11 2009 : Debug: rlm_ldap: user bill authenticated succesfully Sun Mar 15 18:07:11 2009 : Debug: modsingle[authenticate]: returned from ldap (rlm_ldap) for request 0 Sun Mar 15 18:07:11 2009 : Debug: modcall[authenticate]: module "ldap" returns ok for request 0 Sun Mar 15 18:07:11 2009 : Debug: modcall: leaving group LDAP (returns ok) for request 0 Sun Mar 15 18:07:11 2009 : Auth: Login OK: [bill] (from client localNas port 0) Sending Access-Accept of id 216 to 127.0.0.1 port 56359 Sun Mar 15 18:07:11 2009 : Debug: Finished request 0 Sun Mar 15 18:07:11 2009 : Debug: Going to the next request Sun Mar 15 18:07:11 2009 : Debug: --- Walking the entire request list --- Sun Mar 15 18:07:11 2009 : Debug: Waking up in 6 seconds... Sun Mar 15 18:07:17 2009 : Debug: --- Walking the entire request list --- Sun Mar 15 18:07:17 2009 : Debug: Cleaning up request 0 ID 216 with timestamp 49bd43cf Sun Mar 15 18:07:17 2009 : Debug: Nothing to do. Sleeping until we see a request. And this is the debug output for version 2.1.3... rad_recv: Access-Request packet from host 127.0.0.1 port 32787, id=186, length=27 User-Name = "bill" Sun Mar 15 17:59:37 2009 : Info: +- entering group authorize {...} Sun Mar 15 17:59:37 2009 : Info: ++[preprocess] returns ok Sun Mar 15 17:59:37 2009 : Info: [auth_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/127.0.0.1/auth-detail-20090315 Sun Mar 15 17:59:37 2009 : Info: [auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/127.0.0.1/auth-detail-20090315 Sun Mar 15 17:59:37 2009 : Info: [auth_log] expand: %t -> Sun Mar 15 17:59:37 2009 Sun Mar 15 17:59:37 2009 : Info: ++[auth_log] returns ok Sun Mar 15 17:59:37 2009 : Info: [ldap] performing user authorization for bill Sun Mar 15 17:59:37 2009 : Info: [ldap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details Sun Mar 15 17:59:37 2009 : Info: [ldap] expand: (sAMAccountName=%{Stripped-User-Name:-%{User-Name}}) -> (sAMAccountName=bill) Sun Mar 15 17:59:37 2009 : Info: [ldap] expand: dc=foo,dc=ac,dc=uk -> dc=foo,dc=ac,dc=uk Sun Mar 15 17:59:37 2009 : Debug: rlm_ldap: ldap_get_conn: Checking Id: 0 Sun Mar 15 17:59:37 2009 : Debug: rlm_ldap: ldap_get_conn: Got Id: 0 Sun Mar 15 17:59:37 2009 : Debug: rlm_ldap: attempting LDAP reconnection Sun Mar 15 17:59:37 2009 : Debug: rlm_ldap: (re)connect to logon02.fed.cclrc.ac.uk:389, authentication 0 Sun Mar 15 17:59:38 2009 : Debug: rlm_ldap: bind as / to logon02.fed.cclrc.ac.uk:389 Sun Mar 15 17:59:38 2009 : Debug: rlm_ldap: waiting for bind result ... Sun Mar 15 17:59:38 2009 : Debug: rlm_ldap: Bind was successful Sun Mar 15 17:59:38 2009 : Debug: rlm_ldap: performing search in dc=foo,dc=ac,dc=uk, with filter (sAMAccountName=bill) Sun Mar 15 17:59:38 2009 : Info: [ldap] looking for check items in directory... Sun Mar 15 17:59:38 2009 : Info: [ldap] looking for reply items in directory... Sun Mar 15 17:59:38 2009 : Debug: WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? Sun Mar 15 17:59:38 2009 : Info: [ldap] user bill authorized to use remote access Sun Mar 15 17:59:38 2009 : Debug: rlm_ldap: ldap_release_conn: Release Id: 0 Sun Mar 15 17:59:38 2009 : Info: ++[ldap] returns ok Sun Mar 15 17:59:38 2009 : Info: ++[expiration] returns noop Sun Mar 15 17:59:38 2009 : Info: ++[logintime] returns noop Sun Mar 15 17:59:38 2009 : Info: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user Sun Mar 15 17:59:38 2009 : Info: Failed to authenticate the user. Sun Mar 15 17:59:38 2009 : Auth: Login incorrect: [bill] (from client localNas port 0) Sun Mar 15 17:59:38 2009 : Info: Using Post-Auth-Type Reject Sun Mar 15 17:59:38 2009 : Info: +- entering group REJECT {...} Sun Mar 15 17:59:38 2009 : Info: [attr_filter.access_reject] expand: %{User-Name} -> bill Sun Mar 15 17:59:38 2009 : Debug: attr_filter: Matched entry DEFAULT at line 11 Sun Mar 15 17:59:38 2009 : Info: ++[attr_filter.access_reject] returns updated Sun Mar 15 17:59:38 2009 : Info: Delaying reject of request 0 for 1 seconds Sun Mar 15 17:59:38 2009 : Debug: Going to the next request Sun Mar 15 17:59:38 2009 : Debug: Waking up in 0.9 seconds. Sun Mar 15 17:59:38 2009 : Info: Sending delayed reject for request 0 Sending Access-Reject of id 186 to 127.0.0.1 port 32787 Sun Mar 15 17:59:38 2009 : Debug: Waking up in 4.9 seconds. Sun Mar 15 17:59:43 2009 : Info: Cleaning up request 0 ID 186 with timestamp +91 Sun Mar 15 17:59:43 2009 : Debug: Ready to process requests.

3 5

Using Freeradius authorization to send data to a microcontroller
by Joeven Rex Dizon 16 Mar '09

16 Mar '09

I'm a relatively new freeradius user so I am not really an expert with it. In our project, depending on a user's authentication/authorization by the server, we need to send an "unlock/lock" byte to a microcontroller (connected to /dev/ttyUSB0, by the way). So where do I start with the solution? Can I run a certain code/program automatically once the server authenticates a user? Are there any previous applications similar to this? Our installed version is 2.1.0+dfsg-0ubuntu2, running on Ubuntu 8.10. The backend database we used is MySql. Thanks in advance. Rex Dizon

2 1

Re: radiusd: symbol lookup error: /usr/lib/rlm_eap_tls-2.1.3.so: undefined symbol
by Peter Param 16 Mar '09

16 Mar '09

>Did you try RE-BUILDING the server when you only had one version of >OpenSSL installed? I did that and the SSL_CTX_ERROR message is now gone and radiusd runs successfully. However it won't accept encrypted authentication requests: rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to secureldapcentral.stvincents.com.au:636, authentication 0 rlm_ldap: setting TLS mode to 1 rlm_ldap: could not set LDAP_OPT_X_TLS option Success rlm_ldap: setting TLS CACert File to certs/SVMHS_CA_SSL_Server.pem rlm_ldap: could not set LDAP_OPT_X_TLS_CACERTFILE option to certs/SVMHS_CA_SSL_Server.pem rlm_ldap: setting TLS Require Cert to never rlm_ldap: bind as cn=freeradius,ou=services,ou=Darlinghurst,ou=NSW,o=SCHS,c=AU/abc123 to secureldapcentral.stvincents.com.au:636 rlm_ldap: waiting for bind result ... rlm_ldap: ldap_result() rlm_ldap: cn=freeradius,ou=services,ou=Darlinghurst,ou=NSW,o=SCHS,c=AU bind to secureldapcentral.stvincents.com.au:636 failed: Can't contact LDAP server rlm_ldap: (re)connection attempt failed I can authenticate to the ldap backend with an ldap client using port 636 but not with freeradius. The complete -X output: radius02:/etc/freeradius# radiusd -X FreeRADIUS Version 2.1.3, for host i686-pc-linux-gnu, built on Mar 16 2009 at 11:45:16 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/roles_search including configuration file /etc/freeradius/modules/patient_search including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/people_search including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel including dictionary file /etc/freeradius/dictionary main { prefix = "/etc" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } client 127.0.0.1 { require_message_authenticator = no secret = "testing123" shortname = "localhost" nastype = "other" } client 10.56.48.0/20 { require_message_authenticator = no secret = "testing123" shortname = "patient-wireless-network-1" nastype = "other" } client 10.56.0.0/20 { require_message_authenticator = no secret = testing123" shortname = "wireless-network-1" nastype = "cisco" } client 10.57.11.12 { require_message_authenticator = no secret = "testing123" shortname = "wireless-network-1" } client 203.20.164.0/24 { require_message_authenticator = no secret = "testing123" shortname = "campusvpn" nastype = "cisco.vpn3000" } client 10.56.13.161 { require_message_authenticator = no secret = "testing123" shortname = "svhxvr01acs01" nastype = "cisco" } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_expr Module: Instantiating expr } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/etc/freeradius/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } } modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_ldap Module: Instantiating roles_search ldap roles_search { server = "secureldapcentral.stvincents.com.au" port = 636 password = "testing123" identity = "cn=freeradius,ou=services,ou=Darlinghurst,ou=NSW,o=SCHS,c=AU" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = yes start_tls = no tls_cacertfile = "certs/SVMHS_CA_SSL_Server.pem" tls_require_cert = "never" basedn = "ou=roles,ou=darlinghurst,ou=nsw,o=schs,c=au" filter = "(cn=%u)" base_filter = "(objectclass=radiusprofile)" password_attribute = "SHA-Password" auto_header = yes access_attr = "cn" access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/freeradius/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Creating new attribute roles_search-Ldap-Group rlm_ldap: Registering ldap_groupcmp for roles_search-Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name roles_search rlm_ldap: Over-riding set_auth_type, as there is no module roles_search listed in the "authenticate" section. rlm_ldap: reading ldap<->radius mappings from file /etc/freeradius/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP userPassword mapped to RADIUS User-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusSessionTerminateTime mapped to RADIUS WISPr-Session-Terminate-Time rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id rlm_ldap: LDAP cVPN3000-Access-Hours mapped to RADIUS Access-Hours rlm_ldap: LDAP cVPN3000-Simultaneous-Logins mapped to RADIUS Simultaneous-Logins rlm_ldap: LDAP cVPN3000-Primary-DNS mapped to RADIUS Primary-DNS rlm_ldap: LDAP cVPN3000-Secondary-DNS mapped to RADIUS Secondary-DNS rlm_ldap: LDAP cVPN3000-Primary-WINS mapped to RADIUS Primary-WINS rlm_ldap: LDAP cVPN3000-Primary-WINS mapped to RADIUS Secondary-WINS rlm_ldap: LDAP cVPN3000-SEP-Card-Assignment mapped to RADIUS SEP-Card-Assignment rlm_ldap: LDAP cVPN3000-Tunneling-Protocols mapped to RADIUS Tunneling-Protocols rlm_ldap: LDAP cVPN3000-IPSec-Sec-Association mapped to RADIUS IPSec-Sec-Association rlm_ldap: LDAP cVPN3000-IPSec-Authentication mapped to RADIUS IPSec-Authentication rlm_ldap: LDAP cVPN3000-IPSec-Banner1 mapped to RADIUS IPSec-Banner1 rlm_ldap: LDAP cVPN3000-IPSec-Allow-Passwd-Store mapped to RADIUS IPSec-Allow-Passwd-Store rlm_ldap: LDAP cVPN3000-Use-Client-Address mapped to RADIUS Use-Client-Address rlm_ldap: LDAP cVPN3000-PPTP-Encryption mapped to RADIUS PPTP-Encryption rlm_ldap: LDAP cVPN3000-L2TP-Encryption mapped to RADIUS L2TP-Encryption rlm_ldap: LDAP cVPN3000-IPSec-Split-Tunnel-List mapped to RADIUS IPSec-Split-Tunnel-List rlm_ldap: LDAP cVPN3000-IPSec-Default-Domain mapped to RADIUS IPSec-Default-Domain rlm_ldap: LDAP cVPN3000-IPSec-Split-DNS-Names mapped to RADIUS IPSec-Split-DNS-Names rlm_ldap: LDAP cVPN3000-IPSec-Tunnel-Type mapped to RADIUS IPSec-Tunnel-Type rlm_ldap: LDAP cVPN3000-IPSec-Mode-Config mapped to RADIUS IPSec-Mode-Config rlm_ldap: LDAP cVPN3000-IPSec-User-Group-Lock mapped to RADIUS IPSec-User-Group-Lock rlm_ldap: LDAP cVPN3000-IPSec-Over-UDP mapped to RADIUS IPSec-Over-UDP rlm_ldap: LDAP cVPN3000-IPSec-Over-UDP-Port mapped to RADIUS IPSec-Over-UDP-Port rlm_ldap: LDAP cVPN3000-IPSec-Banner2 mapped to RADIUS IPSec-Banner2 rlm_ldap: LDAP cVPN3000-PPTP-MPPC-Compression mapped to RADIUS PPTP-MPPC-Compression rlm_ldap: LDAP cVPN3000-L2TP-MPPC-Compression mapped to RADIUS L2TP-MPPC-Compression rlm_ldap: LDAP cVPN3000-IPSec-IP-Compression mapped to RADIUS IPSec-IP-Compression rlm_ldap: LDAP cVPN3000-IPSec-IKE-Peer-ID-Check mapped to RADIUS IPSec-IKE-Peer-ID-Check rlm_ldap: LDAP cVPN3000-IKE-Keep-Alives mapped to RADIUS IKE-Keep-Alives rlm_ldap: LDAP cVPN3000-IPSec-Auth-On-Rekey mapped to RADIUS IPSec-Auth-On-Rekey rlm_ldap: LDAP cVPN3000-Required-Client-Firewall-Vendor-Code mapped to RADIUS Reqrd-Client-Fw-Vendor-Code rlm_ldap: LDAP cVPN3000-Required-Client-Firewall-Product-Code mapped to RADIUS Reqrd-Client-Fw-Product-Code rlm_ldap: LDAP cVPN3000-Required-Client-Firewall-Description mapped to RADIUS Reqrd-Client-Fw-Description rlm_ldap: LDAP cVPN3000-Require-HW-Client-Auth mapped to RADIUS Reqr-HW-Client-Auth rlm_ldap: LDAP cVPN3000-Require-Individual-User-Auth mapped to RADIUS Reqr-Individual-User-Auth rlm_ldap: LDAP cVPN3000-Authenticated-User-Idle-Timeout mapped to RADIUS Authd-User-Idle-Timeout rlm_ldap: LDAP cVPN3000-Cisco-IP-Phone-Bypass mapped to RADIUS Cisco-IP-Phone-Bypass rlm_ldap: LDAP cVPN3000-IPSec-Split-Tunneling-Policy mapped to RADIUS IPSec-Split-Tunneling-Policy rlm_ldap: LDAP cVPN3000-IPSec-Required-Client-Firewall-Capability mapped to RADIUS IPSec-Reqrd-Client-Fw-Cap rlm_ldap: LDAP cVPN3000-IPSec-Client-Firewall-Filter-Name mapped to RADIUS IPSec-Client-Fw-Filter-Name rlm_ldap: LDAP cVPN3000-IPSec-Client-Firewall-Filter-Optional mapped to RADIUS IPSec-Client-Fw-Filter-Opt rlm_ldap: LDAP cVPN3000-IPSec-Backup-Servers mapped to RADIUS IPSec-Backup-Servers rlm_ldap: LDAP cVPN3000-IPSec-Backup-Server-List mapped to RADIUS IPSec-Backup-Server-List rlm_ldap: LDAP cVPN3000-Client-Intercept-DHCP-Configure-Msg mapped to RADIUS MS-Client-Icpt-DHCP-Conf-Msg rlm_ldap: LDAP cVPN3000-MS-Client-Subnet-Mask mapped to RADIUS MS-Client-Subnet-Mask rlm_ldap: LDAP cVPN3000-Allow-Network-Extension-Mode mapped to RADIUS Allow-Network-Extension-Mode rlm_ldap: LDAP cVPN3000-Strip-Realm mapped to RADIUS Strip-Realm rlm_ldap: LDAP Cisco-AVPair mapped to RADIUS Cisco-AVPair rlm_ldap: LDAP cVPN3000-Confidence-Interval mapped to RADIUS IKE-KeepAlive-Confidence-Interval rlm_ldap: LDAP cVPN3000-Cisco-LEAP-Bypass mapped to RADIUS Cisco-LEAP-Bypass rlm_ldap: LDAP cVPN3000-DHCP-Network-Scope mapped to RADIUS DHCP-Network-Scope rlm_ldap: LDAP cVPN3000-Client-Type-Version-Limiting mapped to RADIUS Client-Type-Version-Limiting rlm_ldap: LDAP cVPN3000-WebVPN-Content-Filter-Parameters mapped to RADIUS WebVPN-Content-Filter-Parameters rlm_ldap: LDAP cVPN3000-Port-Forwarding-Name mapped to RADIUS WebVPN-Port-Forwarding-Name rlm_ldap: LDAP cVPN3000-IETF-Radius-Session-Timeout mapped to RADIUS IETF-Radius-Session-Timeout rlm_ldap: LDAP cVPN3000-IETF-Radius-Idle-Timeout mapped to RADIUS IETF-Radius-Idle-Timeout rlm_ldap: LDAP cVPN3000-Authorization-Required mapped to RADIUS Authorization-Required rlm_ldap: LDAP cVPN3000-Authorization-Type mapped to RADIUS Authorization-Type rlm_ldap: LDAP cVPN3000-DN-Field mapped to RADIUS DN-Field rlm_ldap: LDAP cVPN3000-WebVPN-URL-List mapped to RADIUS WebVPN-URL-List rlm_ldap: LDAP cVPN3000-WebVPN-Forwarded-Ports mapped to RADIUS WebVPN-Forwarded-Ports rlm_ldap: LDAP cVPN3000-WebVPN-ACL-Filters mapped to RADIUS WebVPN-ACL-Filters rlm_ldap: LDAP cVPN3000-WebVPN-Homepage mapped to RADIUS WebVPN-Homepage rlm_ldap: LDAP cVPN3000-WebVPN-Single-Sign-On-Server-Name mapped to RADIUS WebVPN-Single-Sign-On-Server-Name rlm_ldap: LDAP cVPN3000-WebVPN-URL-Entry-Enable mapped to RADIUS WebVPN-URL-Entry-Enable rlm_ldap: LDAP cVPN3000-WebVPN-File-Access-Enable mapped to RADIUS WebVPN-File-Access-Enable rlm_ldap: LDAP cVPN3000-WebVPN-File-Server-Entry-Enable mapped to RADIUS WebVPN-File-Server-Entry-Enable rlm_ldap: LDAP cVPN3000-WebVPN-File-Server-Browsing-Enable mapped to RADIUS WebVPN-File-Server-Browsing-Enable rlm_ldap: LDAP cVPN3000-WebVPN-Port-Forwarding-Enable mapped to RADIUS WebVPN-Port-Forwarding-Enable rlm_ldap: LDAP cVPN3000-WebVPN-Port-Forwarding-Exchange-Proxy-Enable mapped to RADIUS WebVPN-Outlook-Exchange-Proxy-Enable rlm_ldap: LDAP cVPN3000-WebVPN-Port-Forwarding-HTTP-Proxy-Enable mapped to RADIUS WebVPN-Port-Forwarding-HTTP-Proxy-Enable rlm_ldap: LDAP cVPN3000-WebVPN-Port-Forwarding-Auto-Download-Enable mapped to RADIUS WebVPN-Auto-Applet-Download-Enable rlm_ldap: LDAP cVPN3000-WebVPN-Citrix-Support-Enable mapped to RADIUS WebVPN-Citrix-Metaframe-Enable rlm_ldap: LDAP cVPN3000-WebVPN-Apply-ACL-Enable mapped to RADIUS WebVPN-Apply-ACL rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Enable mapped to RADIUS WebVPN-SSL-VPN-Client-Enable rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Required-Enable mapped to RADIUS WebVPN-SSL-VPN-Client-Required rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Keep-Enable mapped to RADIUS WebVPN-SSL-VPN-Client-Keep-Installation rlm_ldap: LDAP cVPN3000-IE-Proxy-Server mapped to RADIUS IE-Proxy-Server rlm_ldap: LDAP cVPN3000-IE-Proxy-Method mapped to RADIUS IE-Proxy-Server-Policy rlm_ldap: LDAP cVPN3000-IE-Proxy-Exception-List mapped to RADIUS IE-Proxy-Exception-List rlm_ldap: LDAP cVPN3000-IE-Proxy-Bypass-Local mapped to RADIUS IE-Proxy-Bypass-Local rlm_ldap: LDAP cVPN3000-Tunnel-Group-Lock mapped to RADIUS Tunnel-Group-Lock rlm_ldap: LDAP cVPN3000-Firewall-ACL-In mapped to RADIUS Access-List-Inbound rlm_ldap: LDAP cVPN3000-Firewall-ACL-Out mapped to RADIUS Access-List-Outbound rlm_ldap: LDAP cVPN3000-PFS-Required mapped to RADIUS PFS-Enable rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Keepalive mapped to RADIUS WebVPN-SSL-VPN-Client-Keepalive rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Client-DPD mapped to RADIUS WebVPN-SSL-VPN-Client-Client-DPD rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Gateway-DPD mapped to RADIUS WebVPN-SSL-VPN-Client-Gateway-DPD rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Rekey-Period mapped to RADIUS WebVPN-SSL-VPN-Client-Rekey-Period rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Rekey-Method mapped to RADIUS WebVPN-SSL-VPN-Client-Rekey-Method rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Compression mapped to RADIUS WebVPN-SSL-VPN-Client-Compression conns: 0x817c1b0 Module: Instantiating people_search ldap people_search { server = "secureldapcentral.stvincents.com.au" port = 636 password = "testing123" identity = "cn=freeradius,ou=services,ou=Darlinghurst,ou=NSW,o=SCHS,c=AU" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = yes start_tls = no tls_cacertfile = "certs/SVMHS_CA_SSL_Server.pem" tls_require_cert = "never" basedn = "ou=people,ou=darlinghurst,ou=nsw,o=schs,c=au" filter = "(cn=%u)" base_filter = "(objectclass=radiusprofile)" password_attribute = "SHA-Password" auto_header = yes access_attr = "cn" access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/freeradius/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Creating new attribute people_search-Ldap-Group rlm_ldap: Registering ldap_groupcmp for people_search-Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name people_search rlm_ldap: Over-riding set_auth_type, as there is no module people_search listed in the "authenticate" section. rlm_ldap: reading ldap<->radius mappings from file /etc/freeradius/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP userPassword mapped to RADIUS User-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusSessionTerminateTime mapped to RADIUS WISPr-Session-Terminate-Time rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id rlm_ldap: LDAP cVPN3000-Access-Hours mapped to RADIUS Access-Hours rlm_ldap: LDAP cVPN3000-Simultaneous-Logins mapped to RADIUS Simultaneous-Logins rlm_ldap: LDAP cVPN3000-Primary-DNS mapped to RADIUS Primary-DNS rlm_ldap: LDAP cVPN3000-Secondary-DNS mapped to RADIUS Secondary-DNS rlm_ldap: LDAP cVPN3000-Primary-WINS mapped to RADIUS Primary-WINS rlm_ldap: LDAP cVPN3000-Primary-WINS mapped to RADIUS Secondary-WINS rlm_ldap: LDAP cVPN3000-SEP-Card-Assignment mapped to RADIUS SEP-Card-Assignment rlm_ldap: LDAP cVPN3000-Tunneling-Protocols mapped to RADIUS Tunneling-Protocols rlm_ldap: LDAP cVPN3000-IPSec-Sec-Association mapped to RADIUS IPSec-Sec-Association rlm_ldap: LDAP cVPN3000-IPSec-Authentication mapped to RADIUS IPSec-Authentication rlm_ldap: LDAP cVPN3000-IPSec-Banner1 mapped to RADIUS IPSec-Banner1 rlm_ldap: LDAP cVPN3000-IPSec-Allow-Passwd-Store mapped to RADIUS IPSec-Allow-Passwd-Store rlm_ldap: LDAP cVPN3000-Use-Client-Address mapped to RADIUS Use-Client-Address rlm_ldap: LDAP cVPN3000-PPTP-Encryption mapped to RADIUS PPTP-Encryption rlm_ldap: LDAP cVPN3000-L2TP-Encryption mapped to RADIUS L2TP-Encryption rlm_ldap: LDAP cVPN3000-IPSec-Split-Tunnel-List mapped to RADIUS IPSec-Split-Tunnel-List rlm_ldap: LDAP cVPN3000-IPSec-Default-Domain mapped to RADIUS IPSec-Default-Domain rlm_ldap: LDAP cVPN3000-IPSec-Split-DNS-Names mapped to RADIUS IPSec-Split-DNS-Names rlm_ldap: LDAP cVPN3000-IPSec-Tunnel-Type mapped to RADIUS IPSec-Tunnel-Type rlm_ldap: LDAP cVPN3000-IPSec-Mode-Config mapped to RADIUS IPSec-Mode-Config rlm_ldap: LDAP cVPN3000-IPSec-User-Group-Lock mapped to RADIUS IPSec-User-Group-Lock rlm_ldap: LDAP cVPN3000-IPSec-Over-UDP mapped to RADIUS IPSec-Over-UDP rlm_ldap: LDAP cVPN3000-IPSec-Over-UDP-Port mapped to RADIUS IPSec-Over-UDP-Port rlm_ldap: LDAP cVPN3000-IPSec-Banner2 mapped to RADIUS IPSec-Banner2 rlm_ldap: LDAP cVPN3000-PPTP-MPPC-Compression mapped to RADIUS PPTP-MPPC-Compression rlm_ldap: LDAP cVPN3000-L2TP-MPPC-Compression mapped to RADIUS L2TP-MPPC-Compression rlm_ldap: LDAP cVPN3000-IPSec-IP-Compression mapped to RADIUS IPSec-IP-Compression rlm_ldap: LDAP cVPN3000-IPSec-IKE-Peer-ID-Check mapped to RADIUS IPSec-IKE-Peer-ID-Check rlm_ldap: LDAP cVPN3000-IKE-Keep-Alives mapped to RADIUS IKE-Keep-Alives rlm_ldap: LDAP cVPN3000-IPSec-Auth-On-Rekey mapped to RADIUS IPSec-Auth-On-Rekey rlm_ldap: LDAP cVPN3000-Required-Client-Firewall-Vendor-Code mapped to RADIUS Reqrd-Client-Fw-Vendor-Code rlm_ldap: LDAP cVPN3000-Required-Client-Firewall-Product-Code mapped to RADIUS Reqrd-Client-Fw-Product-Code rlm_ldap: LDAP cVPN3000-Required-Client-Firewall-Description mapped to RADIUS Reqrd-Client-Fw-Description rlm_ldap: LDAP cVPN3000-Require-HW-Client-Auth mapped to RADIUS Reqr-HW-Client-Auth rlm_ldap: LDAP cVPN3000-Require-Individual-User-Auth mapped to RADIUS Reqr-Individual-User-Auth rlm_ldap: LDAP cVPN3000-Authenticated-User-Idle-Timeout mapped to RADIUS Authd-User-Idle-Timeout rlm_ldap: LDAP cVPN3000-Cisco-IP-Phone-Bypass mapped to RADIUS Cisco-IP-Phone-Bypass rlm_ldap: LDAP cVPN3000-IPSec-Split-Tunneling-Policy mapped to RADIUS IPSec-Split-Tunneling-Policy rlm_ldap: LDAP cVPN3000-IPSec-Required-Client-Firewall-Capability mapped to RADIUS IPSec-Reqrd-Client-Fw-Cap rlm_ldap: LDAP cVPN3000-IPSec-Client-Firewall-Filter-Name mapped to RADIUS IPSec-Client-Fw-Filter-Name rlm_ldap: LDAP cVPN3000-IPSec-Client-Firewall-Filter-Optional mapped to RADIUS IPSec-Client-Fw-Filter-Opt rlm_ldap: LDAP cVPN3000-IPSec-Backup-Servers mapped to RADIUS IPSec-Backup-Servers rlm_ldap: LDAP cVPN3000-IPSec-Backup-Server-List mapped to RADIUS IPSec-Backup-Server-List rlm_ldap: LDAP cVPN3000-Client-Intercept-DHCP-Configure-Msg mapped to RADIUS MS-Client-Icpt-DHCP-Conf-Msg rlm_ldap: LDAP cVPN3000-MS-Client-Subnet-Mask mapped to RADIUS MS-Client-Subnet-Mask rlm_ldap: LDAP cVPN3000-Allow-Network-Extension-Mode mapped to RADIUS Allow-Network-Extension-Mode rlm_ldap: LDAP cVPN3000-Strip-Realm mapped to RADIUS Strip-Realm rlm_ldap: LDAP Cisco-AVPair mapped to RADIUS Cisco-AVPair rlm_ldap: LDAP cVPN3000-Confidence-Interval mapped to RADIUS IKE-KeepAlive-Confidence-Interval rlm_ldap: LDAP cVPN3000-Cisco-LEAP-Bypass mapped to RADIUS Cisco-LEAP-Bypass rlm_ldap: LDAP cVPN3000-DHCP-Network-Scope mapped to RADIUS DHCP-Network-Scope rlm_ldap: LDAP cVPN3000-Client-Type-Version-Limiting mapped to RADIUS Client-Type-Version-Limiting rlm_ldap: LDAP cVPN3000-WebVPN-Content-Filter-Parameters mapped to RADIUS WebVPN-Content-Filter-Parameters rlm_ldap: LDAP cVPN3000-Port-Forwarding-Name mapped to RADIUS WebVPN-Port-Forwarding-Name rlm_ldap: LDAP cVPN3000-IETF-Radius-Session-Timeout mapped to RADIUS IETF-Radius-Session-Timeout rlm_ldap: LDAP cVPN3000-IETF-Radius-Idle-Timeout mapped to RADIUS IETF-Radius-Idle-Timeout rlm_ldap: LDAP cVPN3000-Authorization-Required mapped to RADIUS Authorization-Required rlm_ldap: LDAP cVPN3000-Authorization-Type mapped to RADIUS Authorization-Type rlm_ldap: LDAP cVPN3000-DN-Field mapped to RADIUS DN-Field rlm_ldap: LDAP cVPN3000-WebVPN-URL-List mapped to RADIUS WebVPN-URL-List rlm_ldap: LDAP cVPN3000-WebVPN-Forwarded-Ports mapped to RADIUS WebVPN-Forwarded-Ports rlm_ldap: LDAP cVPN3000-WebVPN-ACL-Filters mapped to RADIUS WebVPN-ACL-Filters rlm_ldap: LDAP cVPN3000-WebVPN-Homepage mapped to RADIUS WebVPN-Homepage rlm_ldap: LDAP cVPN3000-WebVPN-Single-Sign-On-Server-Name mapped to RADIUS WebVPN-Single-Sign-On-Server-Name rlm_ldap: LDAP cVPN3000-WebVPN-URL-Entry-Enable mapped to RADIUS WebVPN-URL-Entry-Enable rlm_ldap: LDAP cVPN3000-WebVPN-File-Access-Enable mapped to RADIUS WebVPN-File-Access-Enable rlm_ldap: LDAP cVPN3000-WebVPN-File-Server-Entry-Enable mapped to RADIUS WebVPN-File-Server-Entry-Enable rlm_ldap: LDAP cVPN3000-WebVPN-File-Server-Browsing-Enable mapped to RADIUS WebVPN-File-Server-Browsing-Enable rlm_ldap: LDAP cVPN3000-WebVPN-Port-Forwarding-Enable mapped to RADIUS WebVPN-Port-Forwarding-Enable rlm_ldap: LDAP cVPN3000-WebVPN-Port-Forwarding-Exchange-Proxy-Enable mapped to RADIUS WebVPN-Outlook-Exchange-Proxy-Enable rlm_ldap: LDAP cVPN3000-WebVPN-Port-Forwarding-HTTP-Proxy-Enable mapped to RADIUS WebVPN-Port-Forwarding-HTTP-Proxy-Enable rlm_ldap: LDAP cVPN3000-WebVPN-Port-Forwarding-Auto-Download-Enable mapped to RADIUS WebVPN-Auto-Applet-Download-Enable rlm_ldap: LDAP cVPN3000-WebVPN-Citrix-Support-Enable mapped to RADIUS WebVPN-Citrix-Metaframe-Enable rlm_ldap: LDAP cVPN3000-WebVPN-Apply-ACL-Enable mapped to RADIUS WebVPN-Apply-ACL rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Enable mapped to RADIUS WebVPN-SSL-VPN-Client-Enable rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Required-Enable mapped to RADIUS WebVPN-SSL-VPN-Client-Required rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Keep-Enable mapped to RADIUS WebVPN-SSL-VPN-Client-Keep-Installation rlm_ldap: LDAP cVPN3000-IE-Proxy-Server mapped to RADIUS IE-Proxy-Server rlm_ldap: LDAP cVPN3000-IE-Proxy-Method mapped to RADIUS IE-Proxy-Server-Policy rlm_ldap: LDAP cVPN3000-IE-Proxy-Exception-List mapped to RADIUS IE-Proxy-Exception-List rlm_ldap: LDAP cVPN3000-IE-Proxy-Bypass-Local mapped to RADIUS IE-Proxy-Bypass-Local rlm_ldap: LDAP cVPN3000-Tunnel-Group-Lock mapped to RADIUS Tunnel-Group-Lock rlm_ldap: LDAP cVPN3000-Firewall-ACL-In mapped to RADIUS Access-List-Inbound rlm_ldap: LDAP cVPN3000-Firewall-ACL-Out mapped to RADIUS Access-List-Outbound rlm_ldap: LDAP cVPN3000-PFS-Required mapped to RADIUS PFS-Enable rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Keepalive mapped to RADIUS WebVPN-SSL-VPN-Client-Keepalive rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Client-DPD mapped to RADIUS WebVPN-SSL-VPN-Client-Client-DPD rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Gateway-DPD mapped to RADIUS WebVPN-SSL-VPN-Client-Gateway-DPD rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Rekey-Period mapped to RADIUS WebVPN-SSL-VPN-Client-Rekey-Period rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Rekey-Method mapped to RADIUS WebVPN-SSL-VPN-Client-Rekey-Method rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Compression mapped to RADIUS WebVPN-SSL-VPN-Client-Compression conns: 0x817f878 Module: Instantiating patient_search ldap patient_search { server = "secureldapcentral.stvincents.com.au" port = 636 password = "testing123" identity = "cn=freeradius,ou=services,ou=Darlinghurst,ou=NSW,o=SCHS,c=AU" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = yes start_tls = no tls_cacertfile = "certs/SVMHS_CA_SSL_Server.pem" tls_require_cert = "never" basedn = "ou=patients,ou=darlinghurst,ou=nsw,o=schs,c=au" filter = "(cn=%u)" base_filter = "(objectclass=radiusprofile)" password_attribute = "SHA-Password" auto_header = yes access_attr = "cn" access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/freeradius/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Creating new attribute patient_search-Ldap-Group rlm_ldap: Registering ldap_groupcmp for patient_search-Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name patient_search rlm_ldap: Over-riding set_auth_type, as there is no module patient_search listed in the "authenticate" section. rlm_ldap: reading ldap<->radius mappings from file /etc/freeradius/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP userPassword mapped to RADIUS User-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusSessionTerminateTime mapped to RADIUS WISPr-Session-Terminate-Time rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id rlm_ldap: LDAP cVPN3000-Access-Hours mapped to RADIUS Access-Hours rlm_ldap: LDAP cVPN3000-Simultaneous-Logins mapped to RADIUS Simultaneous-Logins rlm_ldap: LDAP cVPN3000-Primary-DNS mapped to RADIUS Primary-DNS rlm_ldap: LDAP cVPN3000-Secondary-DNS mapped to RADIUS Secondary-DNS rlm_ldap: LDAP cVPN3000-Primary-WINS mapped to RADIUS Primary-WINS rlm_ldap: LDAP cVPN3000-Primary-WINS mapped to RADIUS Secondary-WINS rlm_ldap: LDAP cVPN3000-SEP-Card-Assignment mapped to RADIUS SEP-Card-Assignment rlm_ldap: LDAP cVPN3000-Tunneling-Protocols mapped to RADIUS Tunneling-Protocols rlm_ldap: LDAP cVPN3000-IPSec-Sec-Association mapped to RADIUS IPSec-Sec-Association rlm_ldap: LDAP cVPN3000-IPSec-Authentication mapped to RADIUS IPSec-Authentication rlm_ldap: LDAP cVPN3000-IPSec-Banner1 mapped to RADIUS IPSec-Banner1 rlm_ldap: LDAP cVPN3000-IPSec-Allow-Passwd-Store mapped to RADIUS IPSec-Allow-Passwd-Store rlm_ldap: LDAP cVPN3000-Use-Client-Address mapped to RADIUS Use-Client-Address rlm_ldap: LDAP cVPN3000-PPTP-Encryption mapped to RADIUS PPTP-Encryption rlm_ldap: LDAP cVPN3000-L2TP-Encryption mapped to RADIUS L2TP-Encryption rlm_ldap: LDAP cVPN3000-IPSec-Split-Tunnel-List mapped to RADIUS IPSec-Split-Tunnel-List rlm_ldap: LDAP cVPN3000-IPSec-Default-Domain mapped to RADIUS IPSec-Default-Domain rlm_ldap: LDAP cVPN3000-IPSec-Split-DNS-Names mapped to RADIUS IPSec-Split-DNS-Names rlm_ldap: LDAP cVPN3000-IPSec-Tunnel-Type mapped to RADIUS IPSec-Tunnel-Type rlm_ldap: LDAP cVPN3000-IPSec-Mode-Config mapped to RADIUS IPSec-Mode-Config rlm_ldap: LDAP cVPN3000-IPSec-User-Group-Lock mapped to RADIUS IPSec-User-Group-Lock rlm_ldap: LDAP cVPN3000-IPSec-Over-UDP mapped to RADIUS IPSec-Over-UDP rlm_ldap: LDAP cVPN3000-IPSec-Over-UDP-Port mapped to RADIUS IPSec-Over-UDP-Port rlm_ldap: LDAP cVPN3000-IPSec-Banner2 mapped to RADIUS IPSec-Banner2 rlm_ldap: LDAP cVPN3000-PPTP-MPPC-Compression mapped to RADIUS PPTP-MPPC-Compression rlm_ldap: LDAP cVPN3000-L2TP-MPPC-Compression mapped to RADIUS L2TP-MPPC-Compression rlm_ldap: LDAP cVPN3000-IPSec-IP-Compression mapped to RADIUS IPSec-IP-Compression rlm_ldap: LDAP cVPN3000-IPSec-IKE-Peer-ID-Check mapped to RADIUS IPSec-IKE-Peer-ID-Check rlm_ldap: LDAP cVPN3000-IKE-Keep-Alives mapped to RADIUS IKE-Keep-Alives rlm_ldap: LDAP cVPN3000-IPSec-Auth-On-Rekey mapped to RADIUS IPSec-Auth-On-Rekey rlm_ldap: LDAP cVPN3000-Required-Client-Firewall-Vendor-Code mapped to RADIUS Reqrd-Client-Fw-Vendor-Code rlm_ldap: LDAP cVPN3000-Required-Client-Firewall-Product-Code mapped to RADIUS Reqrd-Client-Fw-Product-Code rlm_ldap: LDAP cVPN3000-Required-Client-Firewall-Description mapped to RADIUS Reqrd-Client-Fw-Description rlm_ldap: LDAP cVPN3000-Require-HW-Client-Auth mapped to RADIUS Reqr-HW-Client-Auth rlm_ldap: LDAP cVPN3000-Require-Individual-User-Auth mapped to RADIUS Reqr-Individual-User-Auth rlm_ldap: LDAP cVPN3000-Authenticated-User-Idle-Timeout mapped to RADIUS Authd-User-Idle-Timeout rlm_ldap: LDAP cVPN3000-Cisco-IP-Phone-Bypass mapped to RADIUS Cisco-IP-Phone-Bypass rlm_ldap: LDAP cVPN3000-IPSec-Split-Tunneling-Policy mapped to RADIUS IPSec-Split-Tunneling-Policy rlm_ldap: LDAP cVPN3000-IPSec-Required-Client-Firewall-Capability mapped to RADIUS IPSec-Reqrd-Client-Fw-Cap rlm_ldap: LDAP cVPN3000-IPSec-Client-Firewall-Filter-Name mapped to RADIUS IPSec-Client-Fw-Filter-Name rlm_ldap: LDAP cVPN3000-IPSec-Client-Firewall-Filter-Optional mapped to RADIUS IPSec-Client-Fw-Filter-Opt rlm_ldap: LDAP cVPN3000-IPSec-Backup-Servers mapped to RADIUS IPSec-Backup-Servers rlm_ldap: LDAP cVPN3000-IPSec-Backup-Server-List mapped to RADIUS IPSec-Backup-Server-List rlm_ldap: LDAP cVPN3000-Client-Intercept-DHCP-Configure-Msg mapped to RADIUS MS-Client-Icpt-DHCP-Conf-Msg rlm_ldap: LDAP cVPN3000-MS-Client-Subnet-Mask mapped to RADIUS MS-Client-Subnet-Mask rlm_ldap: LDAP cVPN3000-Allow-Network-Extension-Mode mapped to RADIUS Allow-Network-Extension-Mode rlm_ldap: LDAP cVPN3000-Strip-Realm mapped to RADIUS Strip-Realm rlm_ldap: LDAP Cisco-AVPair mapped to RADIUS Cisco-AVPair rlm_ldap: LDAP cVPN3000-Confidence-Interval mapped to RADIUS IKE-KeepAlive-Confidence-Interval rlm_ldap: LDAP cVPN3000-Cisco-LEAP-Bypass mapped to RADIUS Cisco-LEAP-Bypass rlm_ldap: LDAP cVPN3000-DHCP-Network-Scope mapped to RADIUS DHCP-Network-Scope rlm_ldap: LDAP cVPN3000-Client-Type-Version-Limiting mapped to RADIUS Client-Type-Version-Limiting rlm_ldap: LDAP cVPN3000-WebVPN-Content-Filter-Parameters mapped to RADIUS WebVPN-Content-Filter-Parameters rlm_ldap: LDAP cVPN3000-Port-Forwarding-Name mapped to RADIUS WebVPN-Port-Forwarding-Name rlm_ldap: LDAP cVPN3000-IETF-Radius-Session-Timeout mapped to RADIUS IETF-Radius-Session-Timeout rlm_ldap: LDAP cVPN3000-IETF-Radius-Idle-Timeout mapped to RADIUS IETF-Radius-Idle-Timeout rlm_ldap: LDAP cVPN3000-Authorization-Required mapped to RADIUS Authorization-Required rlm_ldap: LDAP cVPN3000-Authorization-Type mapped to RADIUS Authorization-Type rlm_ldap: LDAP cVPN3000-DN-Field mapped to RADIUS DN-Field rlm_ldap: LDAP cVPN3000-WebVPN-URL-List mapped to RADIUS WebVPN-URL-List rlm_ldap: LDAP cVPN3000-WebVPN-Forwarded-Ports mapped to RADIUS WebVPN-Forwarded-Ports rlm_ldap: LDAP cVPN3000-WebVPN-ACL-Filters mapped to RADIUS WebVPN-ACL-Filters rlm_ldap: LDAP cVPN3000-WebVPN-Homepage mapped to RADIUS WebVPN-Homepage rlm_ldap: LDAP cVPN3000-WebVPN-Single-Sign-On-Server-Name mapped to RADIUS WebVPN-Single-Sign-On-Server-Name rlm_ldap: LDAP cVPN3000-WebVPN-URL-Entry-Enable mapped to RADIUS WebVPN-URL-Entry-Enable rlm_ldap: LDAP cVPN3000-WebVPN-File-Access-Enable mapped to RADIUS WebVPN-File-Access-Enable rlm_ldap: LDAP cVPN3000-WebVPN-File-Server-Entry-Enable mapped to RADIUS WebVPN-File-Server-Entry-Enable rlm_ldap: LDAP cVPN3000-WebVPN-File-Server-Browsing-Enable mapped to RADIUS WebVPN-File-Server-Browsing-Enable rlm_ldap: LDAP cVPN3000-WebVPN-Port-Forwarding-Enable mapped to RADIUS WebVPN-Port-Forwarding-Enable rlm_ldap: LDAP cVPN3000-WebVPN-Port-Forwarding-Exchange-Proxy-Enable mapped to RADIUS WebVPN-Outlook-Exchange-Proxy-Enable rlm_ldap: LDAP cVPN3000-WebVPN-Port-Forwarding-HTTP-Proxy-Enable mapped to RADIUS WebVPN-Port-Forwarding-HTTP-Proxy-Enable rlm_ldap: LDAP cVPN3000-WebVPN-Port-Forwarding-Auto-Download-Enable mapped to RADIUS WebVPN-Auto-Applet-Download-Enable rlm_ldap: LDAP cVPN3000-WebVPN-Citrix-Support-Enable mapped to RADIUS WebVPN-Citrix-Metaframe-Enable rlm_ldap: LDAP cVPN3000-WebVPN-Apply-ACL-Enable mapped to RADIUS WebVPN-Apply-ACL rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Enable mapped to RADIUS WebVPN-SSL-VPN-Client-Enable rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Required-Enable mapped to RADIUS WebVPN-SSL-VPN-Client-Required rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Keep-Enable mapped to RADIUS WebVPN-SSL-VPN-Client-Keep-Installation rlm_ldap: LDAP cVPN3000-IE-Proxy-Server mapped to RADIUS IE-Proxy-Server rlm_ldap: LDAP cVPN3000-IE-Proxy-Method mapped to RADIUS IE-Proxy-Server-Policy rlm_ldap: LDAP cVPN3000-IE-Proxy-Exception-List mapped to RADIUS IE-Proxy-Exception-List rlm_ldap: LDAP cVPN3000-IE-Proxy-Bypass-Local mapped to RADIUS IE-Proxy-Bypass-Local rlm_ldap: LDAP cVPN3000-Tunnel-Group-Lock mapped to RADIUS Tunnel-Group-Lock rlm_ldap: LDAP cVPN3000-Firewall-ACL-In mapped to RADIUS Access-List-Inbound rlm_ldap: LDAP cVPN3000-Firewall-ACL-Out mapped to RADIUS Access-List-Outbound rlm_ldap: LDAP cVPN3000-PFS-Required mapped to RADIUS PFS-Enable rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Keepalive mapped to RADIUS WebVPN-SSL-VPN-Client-Keepalive rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Client-DPD mapped to RADIUS WebVPN-SSL-VPN-Client-Client-DPD rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Gateway-DPD mapped to RADIUS WebVPN-SSL-VPN-Client-Gateway-DPD rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Rekey-Period mapped to RADIUS WebVPN-SSL-VPN-Client-Rekey-Period rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Rekey-Method mapped to RADIUS WebVPN-SSL-VPN-Client-Rekey-Method rlm_ldap: LDAP cVPN3000-WebVPN-SVC-Compression mapped to RADIUS WebVPN-SSL-VPN-Client-Compression conns: 0x8182f90 Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Checking session {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Ready to process requests. rad_recv: Access-Request packet from host 203.20.164.21 port 2133, id=70, length=70 User-Name = "pparam" User-Password = "testing123" Vendor-3076-Attr-32 = 0x0000000b NAS-IP-Address = 203.20.164.21 NAS-Port-Type = Virtual +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "pparam", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop [roles_search] performing user authorization for pparam [roles_search] expand: (cn=%u) -> (cn=pparam) [roles_search] expand: ou=roles,ou=darlinghurst,ou=nsw,o=schs,c=au -> ou=roles,ou=darlinghurst,ou=nsw,o=schs,c=au rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to secureldapcentral.stvincents.com.au:636, authentication 0 rlm_ldap: setting TLS mode to 1 rlm_ldap: could not set LDAP_OPT_X_TLS option Success rlm_ldap: setting TLS CACert File to certs/SVMHS_CA_SSL_Server.pem rlm_ldap: could not set LDAP_OPT_X_TLS_CACERTFILE option to certs/SVMHS_CA_SSL_Server.pem rlm_ldap: setting TLS Require Cert to never rlm_ldap: bind as cn=freeradius,ou=services,ou=Darlinghurst,ou=NSW,o=SCHS,c=AU/radius9065 to secureldapcentral.stvincents.com.au:636 rlm_ldap: waiting for bind result ... rlm_ldap: ldap_result() rlm_ldap: cn=freeradius,ou=services,ou=Darlinghurst,ou=NSW,o=SCHS,c=AU bind to secureldapcentral.stvincents.com.au:636 failed: Can't contact LDAP server rlm_ldap: (re)connection attempt failed [roles_search] search failed rlm_ldap: ldap_release_conn: Release Id: 0 ++[roles_search] returns fail Using Post-Auth-Type Reject WARNING: Unknown value specified for Post-Auth-Type. Cannot perform requested action. Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Request packet from host 203.20.164.21 port 2133, id=70, length=70 Waiting to send Access-Reject to client campusvpn port 2133 - ID: 70 Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 70 to 203.20.164.21 port 2133 Waking up in 4.9 seconds. Cleaning up request 0 ID 70 with timestamp +40 Ready to process requests. ********************************************************************** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been virus scanned and although no viruses were detected by the system, St Vincents & Mater Health Sydney accepts no liability for any consequential damage resulting from email containing any computer viruses. **********************************************************************

2 1

peap not working for windows XP client
by deveshgade 15 Mar '09

15 Mar '09

i want to implement peap for my wifi connection. I have set up the access point(D-Link DWL 2100 AP) for using FreeRADIUS 2.1 For authentication.Whenever i send a request from the client to the server,the server fails to authenticate the client. What happens can be seen in the debug code attached below.The problem may be due to the fact that the server certificate used requires to be signed by special XP extensions but i am not sure about it.I am currently using the default certificates created when FreeRADIUS 2.1 is first installed.Can anyone please tell me why the error is occuring and what the remedy for this is?? I am using Fedora 8 as server. Debug output for FreeRADIUS is as follows: [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 1 to 192.168.1.250 port 1034 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9927156798250cebdde85f1a77c9228b Finished request 9. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.1.250 port 1034, id=2, length=290 Message-Authenticator = 0xf65b54a824859ff5858d51b34bb2ea0a Service-Type = Framed-User User-Name = "ITDEPT.COM\\scoe\000" Framed-MTU = 1488 State = 0x9927156798250cebdde85f1a77c9228b Called-Station-Id = "00-17-9A-09-C4-DD:scoeit" Calling-Station-Id = "00-13-02-12-16-6E" NAS-Identifier = "D-Link Access Point" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0202005019800000004616030100410100003d030149b8c76c86fa22fb3b65c1a3da9d93f69b65a4f9489aaffaa42657f64516c2f600001600040005000a000900640062000300060013001200630100 NAS-IP-Address = 192.168.1.250 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "ITDEPT.COM\scoe", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 70 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0041], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 03b0], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 2 to 192.168.1.250 port 1034 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x979ae3c175d60f86c9c0ae82c554378f11f0cf9302931b3888dc716df066a15c655817bd3cc6617cb6feb8e2f41ad9531b68cddece4f8ebe50581111d673463cd9a00198eb4d43adefaa1322618e20d7fe3c5408d3a2329be135a664bf99f281b2b8c1810be4fb1b0cee61b7f943e9eac630a69865faeba4a4206f4bb89c8b27ecbd8e9545615a030151559b539a8c533f5b9779d1c4eb22279c0b5409eb2e242878bff8ac400c10f0fd81e15e246f85d940182be0a60a4a4399cc0bd0a70203010001a317301530130603551d25040c300a06082b06010505070301300d06092a864886f70d010104050003820101001b2311c96ac3ee97d6ecfd99e8 EAP-Message = 0x0adfa8b3b89b7481c139127c0a69572763e40b467f29150c33c33ac9a582fe1c591bd4150d769c0e35195182835bc301441bbb8235a3cdcabf877b8652ce74782d0045114312dd6c214e67adc2ebc59b7330e5fdba13a5e28be5cfdaa4d2e5eaa84e5c500df001989d673ec3ee37cd4b2404722233d2f5ab442e691ff244653402d1b22260370262bee269a518e02bb0b47452aeb51465d047fc83f9075914ba86efbc202b60d5e9ce652ce28561edb25ec4e49cae1a3762672a85ad2bc11efc117481b7de96613d83438a712c589b5f6aef84c695f516c87a6b1f17bfe69446e4e9e7b03fe9f5553486e8dd1aa28d6b36a47216030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x992715679b240cebdde85f1a77c9228b Finished request 10. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.1.250 port 1034, id=3, length=532 Message-Authenticator = 0xc54164092ed8dc2f09a7418d5560f076 Service-Type = Framed-User User-Name = "ITDEPT.COM\\scoe\000" Framed-MTU = 1488 State = 0x992715679b240cebdde85f1a77c9228b Called-Station-Id = "00-17-9A-09-C4-DD:scoeit" Calling-Station-Id = "00-13-02-12-16-6E" NAS-Identifier = "D-Link Access Point" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 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 EAP-Message = 0xa3bbac963e046ef6c7c96392af28b267d494957e189efda814030100010116030100201f15bf9882f5f81840a2f0b88eacf2b32487bec7a66273e6bae9f5899090f568 NAS-IP-Address = 192.168.1.250 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "ITDEPT.COM\scoe", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 310 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 3 to 192.168.1.250 port 1034 EAP-Message = 0x01040031190014030100010116030100204c2d5ce111b4cf1d8484d0a7b0bc663743b67f0dfcf3bc69dfa62631fd9d3e30 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x992715679a230cebdde85f1a77c9228b Finished request 11. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.1.250 port 1034, id=4, length=216 Message-Authenticator = 0xfb5cafdd0840b6ccedd584509afb6159 Service-Type = Framed-User User-Name = "ITDEPT.COM\\scoe\000" Framed-MTU = 1488 State = 0x992715679a230cebdde85f1a77c9228b Called-Station-Id = "00-17-9A-09-C4-DD:scoeit" Calling-Station-Id = "00-13-02-12-16-6E" NAS-Identifier = "D-Link Access Point" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020400061900 NAS-IP-Address = 192.168.1.250 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "ITDEPT.COM\scoe", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 4 to 192.168.1.250 port 1034 EAP-Message = 0x0105002019001703010015b1bb8da1accb8c051e43c474f0b25b6888371dafd2 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x992715679d220cebdde85f1a77c9228b Finished request 12. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.1.250 port 1034, id=5, length=253 Message-Authenticator = 0x559b57aca5bffa7b01a186f5ae288fc8 Service-Type = Framed-User User-Name = "ITDEPT.COM\\scoe\000" Framed-MTU = 1488 State = 0x992715679d220cebdde85f1a77c9228b Called-Station-Id = "00-17-9A-09-C4-DD:scoeit" Calling-Station-Id = "00-13-02-12-16-6E" NAS-Identifier = "D-Link Access Point" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0205002b19001703010020a690881c896db8f3366ba3ee32944a59d4b9fea829756099f89ed10931342409 NAS-IP-Address = 192.168.1.250 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "ITDEPT.COM\scoe", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Identity - ITDEPT.COM\scoe [peap] Got tunnled request EAP-Message = 0x02050014014954444550542e434f4d5c73636f65 server (null) { PEAP: Got tunneled identity of ITDEPT.COM\scoe PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to ITDEPT.COM\scoe Sending tunneled request EAP-Message = 0x02050014014954444550542e434f4d5c73636f65 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "ITDEPT.COM\\scoe" Service-Type = Framed-User Framed-MTU = 1488 Called-Station-Id = "00-17-9A-09-C4-DD:scoeit" Calling-Station-Id = "00-13-02-12-16-6E" NAS-Identifier = "D-Link Access Point" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" NAS-IP-Address = 192.168.1.250 NAS-Port = 1 NAS-Port-Id = "STA port # 1" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "ITDEPT.COM\scoe", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 5 length 20 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x010600291a01060024100063da3b7cc3f43eabec58facf4e1a544954444550542e434f4d5c73636f65 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5dac34625daa2ecf48629eb40108d58e [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010600291a01060024100063da3b7cc3f43eabec58facf4e1a544954444550542e434f4d5c73636f65 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5dac34625daa2ecf48629eb40108d58e [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 5 to 192.168.1.250 port 1034 EAP-Message = 0x01060040190017030100352c6462427fabed095dd20eb0a27126d825f307f85f0ecd4fd26ae52617d9731aa14fcadeb19fac8fc0d0137ed2f8014bf4ef79384e Message-Authenticator = 0x00000000000000000000000000000000 State = 0x992715679c210cebdde85f1a77c9228b Finished request 13. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.1.250 port 1034, id=6, length=307 Message-Authenticator = 0xa39a6fe70736fcc5f6106730554498e1 Service-Type = Framed-User User-Name = "ITDEPT.COM\\scoe\000" Framed-MTU = 1488 State = 0x992715679c210cebdde85f1a77c9228b Called-Station-Id = "00-17-9A-09-C4-DD:scoeit" Calling-Station-Id = "00-13-02-12-16-6E" NAS-Identifier = "D-Link Access Point" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0206006119001703010056ef7f7df93da28d67e1bb560078a1f55a38558fc7fe965a4d12729fedfd5978ea7678f294285464c7a58049a65ac6bfed51f72f89937a6275d512063adefe77cd4a4866c11af7b1d49e60f77003a2581559e005a77732 NAS-IP-Address = 192.168.1.250 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "ITDEPT.COM\scoe", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 97 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunnled request EAP-Message = 0x0206004a1a02060045315c0291fe1459500e2ea66e03781a141b0000000000000000a1f11ae4843edcb38707bda4af4252c47ea544de54571725004954444550542e434f4d5c73636f65 server (null) { PEAP: Setting User-Name to ITDEPT.COM\scoe Sending tunneled request EAP-Message = 0x0206004a1a02060045315c0291fe1459500e2ea66e03781a141b0000000000000000a1f11ae4843edcb38707bda4af4252c47ea544de54571725004954444550542e434f4d5c73636f65 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "ITDEPT.COM\\scoe" State = 0x5dac34625daa2ecf48629eb40108d58e Service-Type = Framed-User Framed-MTU = 1488 Called-Station-Id = "00-17-9A-09-C4-DD:scoeit" Calling-Station-Id = "00-13-02-12-16-6E" NAS-Identifier = "D-Link Access Point" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" NAS-IP-Address = 192.168.1.250 NAS-Port = 1 NAS-Port-Id = "STA port # 1" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "ITDEPT.COM\scoe", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 6 length 74 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] NT Domain delimeter found, should we have enabled with_ntdomain_hack? [mschap] Told to do MS-CHAPv2 for ITDEPT.COM\scoe with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. } # server inner-tunnel [peap] Got tunneled reply code 3 MS-CHAP-Error = "\006E=691 R=1" EAP-Message = 0x04060004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 MS-CHAP-Error = "\006E=691 R=1" EAP-Message = 0x04060004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 6 to 192.168.1.250 port 1034 EAP-Message = 0x010700261900170301001b0b161d0dbb31d7d3cd65286f7aa084ee8708935bed2bc963e60797 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x992715679f200cebdde85f1a77c9228b Finished request 14. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.1.250 port 1034, id=7, length=248 Message-Authenticator = 0x5b1ec30419fb1addf07d5979c76176e0 Service-Type = Framed-User User-Name = "ITDEPT.COM\\scoe\000" Framed-MTU = 1488 State = 0x992715679f200cebdde85f1a77c9228b Called-Station-Id = "00-17-9A-09-C4-DD:scoeit" Calling-Station-Id = "00-13-02-12-16-6E" NAS-Identifier = "D-Link Access Point" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020700261900170301001b01aef267bca260c0c202dbaad96a2914551d213d9a74266916a21a NAS-IP-Address = 192.168.1.250 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "ITDEPT.COM\scoe", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 38 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Had sent TLV failure. User was rejected earlier in this session. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> ITDEPT.COM\scoe attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 15 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 15 Sending Access-Reject of id 7 to 192.168.1.250 port 1034 EAP-Message = 0x04070004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. Cleaning up request 8 ID 0 with timestamp +558 Cleaning up request 9 ID 1 with timestamp +558 Cleaning up request 10 ID 2 with timestamp +559 Cleaning up request 11 ID 3 with timestamp +559 Cleaning up request 12 ID 4 with timestamp +559 Cleaning up request 13 ID 5 with timestamp +559 Cleaning up request 14 ID 6 with timestamp +559 Waking up in 1.0 seconds. Cleaning up request 15 ID 7 with timestamp +559 Ready to process requests. -- View this message in context: http://www.nabble.com/peap-not-working-for-windows-XP-client-tp22473441p224… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 3