- Freeradius-Users - lists.freeradius.org

First steps on RADIUS and fisrt doubts
by Calos Lopez 18 Jan '09

18 Jan '09

Hi all, I've an Ubuntu distro installation (distribution 8.10 server) and I want to setup on my home wireless network a FreeRadius server using EAP/PEAP MSChap authentication with a LDAP server. I followed the instructions is this link http://www.linuxinsight.com/building-debian-freeradius-package-with-eap-tls… to enable EAP on RADIUS. After all configured I runned freeradius -X wich terminated with the following error: rlm_eap: Failed to link EAP-Type/tls: file not found /etc/freeradius/eap.conf[17]: Instantiation failed for module "eap" /etc/freeradius/sites-enabled/inner-tunnel[223]: Failed to find module "eap". /etc/freeradius/sites-enabled/inner-tunnel[176]: Errors parsing authenticate section. } } Errors initializing modules What I'm I doing wrong? Didn't I build or configured correctly FreeRadius. Thanks a lot for your help, I'm gust a beginner in this steps. Attached is all the output. Any other files need to post here, please let me know.

2 2

Re: Freeradius-Users Digest, Vol 45, Issue 60
by obaid ghaznawi 18 Jan '09

18 Jan '09

Hi all, it is solved now, everything was OK except some configuration mistakes, during configuration i followed freeradius.org HOWTO here: http://wiki.freeradius.org/SQL_HOWTO and this HOWTO is for versions before 2 i guess, because it says: Edit /etc/raddb/radiusd.conf and add a line saying 'sql' to the authorize{} > section (which is towards the end of the file). The best place to put it is > just after the 'files' entry. Indeed, if you'll just be using SQL, and not > falling back to text files, you could comment out or delete the 'files' > entry altogether. > i did this in radiusd.conf, so there were duplicate authrize{}, session{}, one in radiusd.conf and other one in the include file /etc/freeradius/sql/mysql/sites-enabled/default. just removing lines of authorize{} and session{} from radiusd.conf and configuring properly at /etc/freeradiusd/sql/mysql/sites-enabled/default everything works fine now. thank you for your support Leigh Martell. and thanks to freeradius.org team. update http://wiki.freeradius.org/SQL_HOWTO so new users can follow. On Fri, Jan 16, 2009 at 5:14 PM, < freeradius-users-request(a)lists.freeradius.org> wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Freeradius + MySQL problem (obaid ghaznawi) > 2. Re: Freeradius + MySQL problem (Leigh Martell) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 16 Jan 2009 16:49:11 +0300 > From: obaid ghaznawi <onaogh(a)gmail.com> > Subject: Freeradius + MySQL problem > To: freeradius-users(a)lists.freeradius.org > Message-ID: > <b8f8e85f0901160549y545cb350ucbf11e3af785a103(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > hi, first of all, i thank all people who are giving thier time to help. > > before i subscribe here and post my email, i am searching around in > internet since a week > and trying my best to solve it, i have learned many things,but there is one > problem i cannot get it solved. > i am trying to make hotspot for some building, i choosed: > Freeradius + Mysql = running on 1 computer (ubuntu server 8.10) as backend > server > and CoovaAP on WRT54GL sending user credentials to backend server for > authentication > my configs (default settings not showed, lines i changed showed) > > freeradius radiusd.conf > ================================================ > . > . all default > . > log { > . > . > #at the end of log{ > auth = yes > auth_badpass = yes > auth_goodpass = yes > } > > modules { > . > . > . > $INCLUDE sql.conf #already there > $INCLUDE sql/mysql/counter.conf #already there > . > . > . > } > > authorize{ > preprocess > chap > mschap > suffix > eap > sql #if i comment out sql and use file, it works, i recive > Packet-Accept, with SQL see the pap warning in debug text > pap > } > > accounting{ > detail > sql > } > > session{ > sql > } > ================================================== > clients.conf > > client localhost { > ipaddr = 127.0.0.1 > secret = clientradsec36365 > require_message_authenticator = no > nastype = other > > } > ================================================== > sql.conf > sql { > database = "mysql" > driver = "rlm_sql_${database}" > server = "localhost" > login = "radius" > password = "frsqldblogin36365" > radius_db = "radius" > . > . > . > sqltrace = yes > sqltracefile = ${logdir}/sqltrace.sql > . > . > } > > @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ > > /etc/freeradius/sql/mysql/schema.sql and nas.sql has been imported into > mysql "radius" database, radius@localhost user granted all on radius.* > > dummy data in tables: > > mysql> SELECT * FROM radcheck; > +----+----------+--------------------+----+-------+ > | id | username | attribute | op | value | > +----+----------+--------------------+----+-------+ > | 1 | obaid | Cleartext-Password | := | 36365 | > +----+----------+--------------------+----+-------+ > 1 row in set (0.00 sec) > > mysql> SELECT * FROM radusergroup; > +----------+-----------+----------+ > | username | groupname | priority | > +----------+-----------+----------+ > | obaid | hotspot | 0 | > +----------+-----------+----------+ > 1 row in set (0.01 sec) > > mysql> SELECT * FROM radgroupcheck; > +----+-----------+-----------+----+-------+ > | id | groupname | attribute | op | value | > +----+-----------+-----------+----+-------+ > | 2 | hotspot | Auth-Type | := | Local | > +----+-----------+-----------+----+-------+ > 1 row in set (0.00 sec) > > > mysql> SELECT * FROM radreply; > +----+----------+---------------+----+-------+ > | id | username | attribute | op | value | > +----+----------+---------------+----+-------+ > | 1 | obaid | Reply-Message | := | Hello | > +----+----------+---------------+----+-------+ > 1 row in set (0.00 sec) > > mysql> SELECT * FROM radgroupreply; > +----+-----------+-----------------+----+-------------+ > | id | groupname | attribute | op | value | > +----+-----------+-----------------+----+-------------+ > | 1 | hotspot | Framed-Protocol | := | PPP | > | 2 | hotspot | Service-Type | := | Framed-User | > +----+-----------+-----------------+----+-------------+ > 2 rows in set (0.00 sec) > > @#$@#$@#$@#$@#$@#$@#$@#$@#$@#$@#$@#$@#$@#$@#$ > > now when running /usr/sbin/freeradius -X and send auth request with radtest > i get > radtest obaid 36365 localhost 1812 clientradsec36365 > > Sending Access-Request of id 96 to 127.0.0.1 port 1812 > User-Name = "obaid" > User-Password = "36365" > NAS-IP-Address = 192.168.1.100 > NAS-Port = 1812 > rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=96, > length=20 > > freeradius -X: > > Listening on authentication address * port 1812 > Listening on accounting address * port 1813 > Listening on proxy address * port 1814 > Ready to process requests. > rad_recv: Access-Request packet from host 127.0.0.1 port 40386, id=96, > length=57 > User-Name = "obaid" > User-Password = "36365" > NAS-IP-Address = 192.168.1.100 > NAS-Port = 1812 > +- entering group authorize {...} > ++[preprocess] returns ok > ++[chap] returns noop > ++[mschap] returns noop > [suffix] No '@' in User-Name = "obaid", looking up realm NULL > [suffix] No such realm "NULL" > ++[suffix] returns noop > [eap] No EAP-Message, not doing EAP > ++[eap] returns noop > ++[unix] returns notfound > ++[files] returns noop > ++[expiration] returns noop > ++[logintime] returns noop > [pap] WARNING! No "known good" password found for the user. Authentication > may fail because of this. > ++[pap] returns noop > No authenticate method (Auth-Type) configuration found for the request: > Rejecting the user > Failed to authenticate the user. > Login incorrect: [obaid/36365] (from client server port 1812) > Using Post-Auth-Type Reject > +- entering group REJECT {...} > expand: %{User-Name} -> obaid > attr_filter: Matched entry DEFAULT at line 11 > ++[attr_filter.access_reject] returns updated > Delaying reject of request 0 for 1 seconds > Going to the next request > Waking up in 0.9 seconds. > Sending delayed reject for request 0 > Sending Access-Reject of id 96 to 127.0.0.1 port 40386 > Waking up in 4.9 seconds. > Cleaning up request 0 ID 96 with timestamp +17 > Ready to process requests. > > -========================================================= > have you noticed that debug output doesnt talk about sql queries ???, and > nothing about sql queries in log files. > > i have used ntradping to send authentication request with CHAP ticked/not > ticked, and i get the same rad+recv:Access-Reject. > > but with all same config (except commenting sql and uncomment file in > radius.conf) and radtesting it works fine. > > it is probably radius cant query mysql, but i used mtop (mysql monitoring > tool) and it showes that radius queried mysql > > or it might be wrong dummy data... > ----- > > i will appreciate it very much if some one will guide me through this. > > thanks for reading. > > Obaid Ghaznawi >

2 1

Bug in checkrad.pl
by Rick Macdougall 18 Jan '09

18 Jan '09

Hi, I believe the redback_telnet in checkrad.pl has a small bug. Original code starting at line 1338 #Ask the question @lines = $t->cmd(String => "show subscribers active $user\@$context"); if ($lines[0] =~ /subscriber $user\@$context/ ) { Should be #Ask the question @lines = $t->cmd(String => "show subscribers active $user\@$context"); if ($lines[0] =~ /subscriber $user\@$context/ ) { ie the $user\@$context needs to be on the same line, at least with our redback. Regards, Rick

2 1

Certificate expired! (OpenSSL 0.9.8.b+Freeradius 1.1.3+Openldap structure)
by Someone Youdontknow 17 Jan '09

17 Jan '09

Hi to all, Our root certificate is expired!!! We are unable to generate a VALID root certificate. Comparison HTML view is attached. You can see certain fields differences between them. Like; *Serial Number is zero ?!?! X509v3 Basic Constraints: * *CA:TRUE* * (The new one is FALSE does it matter?)* * keyid structure is diffrent * First certificate is valid but it is expired! The other one is not valid. How can I generate a *VALID certificate*???

2 1

Authenticate users via AD and checking group membership
by Godfrey Peart 17 Jan '09

17 Jan '09

I am using FR 2.1, at present I can authenticate users against AD and then assign VLAN membership based on user-name via a MySQL database. What I would now like to do is assign vlan membership based on the group membership of the user. When I do an ldapsearch of my AD for a user I get the following output: mymachine:/home/jones # ldapsearch -x -D cn=radman04,cn=users,dc=MYDOMAIN,dc=co,dc=uk -h 10.10.6.131 -b cn=users,dc=MYDOMAIN,dc=co,dc=uk sAMAccountName=radman04 -W Enter LDAP Password: # extended LDIF # # LDAPv3 # base <cn=users,dc=MYDOMAIN,dc=co,dc=uk> with scope subtree # *filter: sAMAccountName=radman04* # requesting: ALL # # radman04, Users, MYDOMAIN.co.uk <http://mydomain.co.uk/> *dn: CN=radman04,CN=Users,DC=MYDOMAIN,DC=co,DC=uk* objectClass: top objectClass: person objectClass: organizationalPerson objectClass: user cn: radman04 givenName: radman04 *distinguishedName: CN=radman04,CN=Users,DC=MYDOMAIN,DC=co,DC=uk* instanceType: 4 whenCreated: 20090113021444.0Z whenChanged: 20090113021444.0Z displayName: radman04 uSNCreated: 36950 *memberOf: CN=GROUPNAME,CN=Users,DC=MYDOMAIN,DC=co,DC=uk* uSNChanged: 36955 name: radman04 objectGUID:: yXoSg4Ln7EWYAuThBRuTSw== userAccountControl: 66048 badPwdCount: 0 codePage: 0 countryCode: 0 badPasswordTime: 0 lastLogoff: 0 lastLogon: 0 pwdLastSet: 128762864842481250 primaryGroupID: 513 objectSid:: AQUAAAAAAAUVAAAANdbgD79SSqoLLz2LYwQAAA== accountExpires: 9223372036854775807 logonCount: 0 sAMAccountName: radman04 sAMAccountType: 805306368 userPrincipalName: radman04(a)*MYDOMAIN*.co.uk objectCategory: CN=Person,CN=Schema,CN=Configuration,DC=*MYDOMAIN* ,DC=co,DC=uk # search result search: 2 result: 0 Success # numResponses: 2 # numEntries: 1 based upon the output how do I construct a method of assigning reply attributes for members of each group and what parts of the radius configuration do I need to change. I don't want to change from AD to ldap for authentication. I have searched the archives but can't link all the elements I've found to solve my problem. Thanks in advance

2 1

Weird problem with some special characters in passwords
by Frank Weis 17 Jan '09

17 Jan '09

Hi all, we have difficulties with a freeradius server authenticating against an LDAP backend. We use the freeradius server for eduroam and also for a few custom applications. We have tried to force the password to UTF-8 or ISO-8859-1 and other encodings in the custom applications, to no avail (we have no way to force this in the securew2 client for eduroam anyway). This works very well most of the time, but fails if the password contains seleCompanyd special charaCompanyrs, like ° (degree) or § (paragraph), for example. We are short of ideas as to what to try next.... Any pointers would be greatly appreciated..... Thanks a lot in advance Frank Weis -------------------------8<----------------------------- +- entering group LDAP3 {...} [ldap3] login attempt by "blabla" with password "qwertz��" [ldap3] user DN: cn=blabla,ou=Company,ou=Persons,o=IDENTITIES rlm_ldap: (re)connect to idm3.iamlocal.blabla.com:636, authentication 1 rlm_ldap: setting TLS mode to 1 rlm_ldap: setting TLS CACert File to //etc/raddb/certs/iam_ca.pem rlm_ldap: bind as cn=blabla,ou=Company,ou=Persons,o=IDENTITIES/qwertz�� to idm3.iamlocal.blabla.com:636 rlm_ldap: waiting for bind result ... rlm_ldap: cn=blabla,ou=Company,ou=Persons,o=IDENTITIES bind to idm3.iamlocal.blabla.com:636 failed Internal (implementation specific) error [ldap3] NDS error: insufficient buffer (-649) [ldap3] ldap_connect() failed ++[ldap3] returns fail A user with a more 'gentle' password succeeds: +- entering group LDAP3 {...} [ldap3] login attempt by "blabla2" with password "bla!!bla" [ldap3] user DN: cn=blabla2,ou=Company,ou=Persons,o=IDENTITIES rlm_ldap: (re)connect to idm3.iamlocal.blabla.com:636, authentication 1 rlm_ldap: setting TLS mode to 1 rlm_ldap: setting TLS CACert File to //etc/raddb/certs/iam_ca.pem rlm_ldap: bind as cn=blabla2,ou=Company,ou=Persons,o=IDENTITIES/bla!!bla to idm3.iamlocal.blabla.com:636 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful [ldap3] user blabla2 authenticated succesfully ++[ldap3] returns ok When I try an ldapsearch to the LDAP-backend on the commandline of the radius server, it works too. When I try a 'radtest' on the commandline of the freeradius server, it succeeds also: radtest blabla qwertz°° 127.0.0.1 1234 testing123 Sending Access-Request of id 129 to 127.0.0.1 port 1812 User-Name = "blabla" User-Password = "qwertz°°" NAS-IP-Address = 1.2.3.4 NAS-Port = 1234 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=129, length=20 (radiusd -X says this: +- entering group LDAP3 {...} [ldap3] login attempt by "blabla" with password "qwertz°°" [ldap3] user DN: cn=blabla,ou=Company,ou=Persons,o=IDENTITIES rlm_ldap: (re)connect to idm3.iamlocal.blabla.com:636, authentication 1 rlm_ldap: setting TLS mode to 1 rlm_ldap: setting TLS CACert File to //etc/raddb/certs/iam_ca.pem rlm_ldap: bind as cn=blabla,ou=Company,ou=Persons,o=IDENTITIES/qwertz°° to idm3.iamlocal.blabla.com:636 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful [ldap3] user blabla authenticated succesfully ++[ldap3] returns ok -- _______________________________________________ Centre de Technologie de l'Education 29 avenue John F. Kennedy L-1855 Luxembourg-Kirchberg email: Frank.Weis(a)Company.lu tél.: +352 247-85973 fax: +352 333797 _______________________________________________

2 1

Weird problem with some special characters in passwords
by Frank Weis 17 Jan '09

17 Jan '09

Hi all, we have difficulties with a freeradius server authenticating against an LDAP backend. We use the freeradius server for eduroam and also for a few custom applications. We have tried to force the password to UTF-8 or ISO-8859-1 and other encodings in the custom applications, to no avail (we have no way to force this in the securew2 client for eduroam anyway). This works very well most of the time, but fails if the password contains seleCompanyd special charaCompanyrs, like ° (degree) or § (paragraph), for example. We are short of ideas as to what to try next.... Any pointers would be greatly appreciated..... Thanks a lot in advance Frank Weis -------------------------8<----------------------------- +- entering group LDAP3 {...} [ldap3] login attempt by "blabla" with password "qwertz??" [ldap3] user DN: cn=blabla,ou=Company,ou=Persons,o=IDENTITIES rlm_ldap: (re)connect to idm3.iamlocal.blabla.com:636, authentication 1 rlm_ldap: setting TLS mode to 1 rlm_ldap: setting TLS CACert File to //etc/raddb/certs/iam_ca.pem rlm_ldap: bind as cn=blabla,ou=Company,ou=Persons,o=IDENTITIES/qwertz?? to idm3.iamlocal.blabla.com:636 rlm_ldap: waiting for bind result ... rlm_ldap: cn=blabla,ou=Company,ou=Persons,o=IDENTITIES bind to idm3.iamlocal.blabla.com:636 failed Internal (implementation specific) error [ldap3] NDS error: insufficient buffer (-649) [ldap3] ldap_connect() failed ++[ldap3] returns fail A user with a more 'gentle' password succeeds: +- entering group LDAP3 {...} [ldap3] login attempt by "blabla2" with password "bla!!bla" [ldap3] user DN: cn=blabla2,ou=Company,ou=Persons,o=IDENTITIES rlm_ldap: (re)connect to idm3.iamlocal.blabla.com:636, authentication 1 rlm_ldap: setting TLS mode to 1 rlm_ldap: setting TLS CACert File to //etc/raddb/certs/iam_ca.pem rlm_ldap: bind as cn=blabla2,ou=Company,ou=Persons,o=IDENTITIES/bla!!bla to idm3.iamlocal.blabla.com:636 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful [ldap3] user blabla2 authenticated succesfully ++[ldap3] returns ok When I try an ldapsearch to the LDAP-backend on the commandline of the radius server, it works too. When I try a 'radtest' on the commandline of the freeradius server, it succeeds also: radtest blabla qwertz°° 127.0.0.1 1234 testing123 Sending Access-Request of id 129 to 127.0.0.1 port 1812 User-Name = "blabla" User-Password = "qwertz°°" NAS-IP-Address = 1.2.3.4 NAS-Port = 1234 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=129, length=20 (radiusd -X says this: +- entering group LDAP3 {...} [ldap3] login attempt by "blabla" with password "qwertz°°" [ldap3] user DN: cn=blabla,ou=Company,ou=Persons,o=IDENTITIES rlm_ldap: (re)connect to idm3.iamlocal.blabla.com:636, authentication 1 rlm_ldap: setting TLS mode to 1 rlm_ldap: setting TLS CACert File to //etc/raddb/certs/iam_ca.pem rlm_ldap: bind as cn=blabla,ou=Company,ou=Persons,o=IDENTITIES/qwertz°° to idm3.iamlocal.blabla.com:636 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful [ldap3] user blabla authenticated succesfully ++[ldap3] returns ok -- _______________________________________________ Centre de Technologie de l'Education 29 avenue John F. Kennedy L-1855 Luxembourg-Kirchberg email: Frank.Weis(a)Company.lu tél.: +352 247-85973 fax: +352 333797 _______________________________________________

1 0

service deactivation with radclient
by janardhan madabattula 16 Jan '09

16 Jan '09

Hi, I tried to deactivate or disable the active service/attribute on a active subscriber, but I failed to do it. I used differnt options to remove the active service like setting the null string etc. Can anyone tell me how to deactive a service on a active sub. Here is the example, I am doing radclient -f coa-file1 10.18.20.122:3799 coa test I tried differnt options in COA-file coa-file1 content: User-Name = "test@local" Qos-Policy-Metering ="" (current this policy is active and I want to disable it) User-Name = "test@local" Deactivate-Service = "QOS-Policy-Metering" Thanks Jana

2 1

FreeRADIUS + Alvarion 4Motion
by Kristoffer Milligan 16 Jan '09

16 Jan '09

Hello again List My battle to make FreeRADIUS work with the Alvarion 4Motion system continues. I have been in contact with one of their engineers, and the only thing he saw that seemed invalid was a couple of missing attributes in the Access Accept response. Please look at the following url: https://www.norgespost.no/aaalog Now, in the tunneled response, there are two attributes: MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 Why aren't these attributes passed to the access accept? Has anyone here integrated FreeRADIUS with the 4Motion system before? Desperate regards, Kristoffer Milligan

3 6

authentication without certification
by Hegedus Gabor 16 Jan '09

16 Jan '09

Hi, I have a problem, (config: server: FreeRadius 2.1.3, ubuntu 8.10 nas: cisco AP client: win xp) The authentication with TLS works fine if i install the certificate on the client.(just for test) I cannot install the client certificate on all client system(some reason -no admin access-) = > i want use eap-ttls or peap for authentication cos it doesn't use certificate, no need install. how can I set it up? I try change the eap modul: default_eap_type = ttls or peap but not works, auth stops (no reject or accept) what is the problem? here is the debug: rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=161, length=121 User-Name = "hege" Framed-MTU = 1400 Called-Station-Id = "001f.6ca9.4240" Calling-Station-Id = "001f.3cae.fb9d" Service-Type = Login-User Message-Authenticator = 0xc15a502d4411ec8efd27ba0ea250c934 EAP-Message = 0x020200090168656765 NAS-Port-Type = Wireless-802.11 NAS-Port = 317 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "ap" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "hege", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 9 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns updated [files] users: Matched entry hege at line 72 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 161 to 10.0.0.1 port 1645 EAP-Message = 0x010300061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xabc8abd1abcbbeb294a359e00e4a0280 Finished request 11. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=162, length=136 User-Name = "hege" Framed-MTU = 1400 Called-Station-Id = "001f.6ca9.4240" Calling-Station-Id = "001f.3cae.fb9d" Service-Type = Login-User Message-Authenticator = 0x7b2402029dc54aa674b650a06c9c8d61 EAP-Message = 0x020300060319 NAS-Port-Type = Wireless-802.11 NAS-Port = 317 State = 0xabc8abd1abcbbeb294a359e00e4a0280 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "ap" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "hege", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns updated [files] users: Matched entry hege at line 72 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 162 to 10.0.0.1 port 1645 EAP-Message = 0x010400061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xabc8abd1aaccb2b294a359e00e4a0280 Finished request 12. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=163, length=245 User-Name = "hege" Framed-MTU = 1400 Called-Station-Id = "001f.6ca9.4240" Calling-Station-Id = "001f.3cae.fb9d" Service-Type = Login-User Message-Authenticator = 0x3cf5569c00de9c5a2b62ea0c9b1de9c5 EAP-Message = 0x020400731980000000691603010064010000600301497086d0b8514dcd6d049d3c8152f6d220610810c0580de41e21b306d80495e3000018002f00350005000ac009c00ac013c01400320038001300040100001f00000009000700000468656765000a00080006001700180019000b00020100 NAS-Port-Type = Wireless-802.11 NAS-Port = 317 State = 0xabc8abd1aaccb2b294a359e00e4a0280 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "ap" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "hege", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 115 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 105 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0064], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 07e5], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 163 to 10.0.0.1 port 1645 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x09060355040613024855310f Message-Authenticator = 0x00000000000000000000000000000000 State = 0xabc8abd1a9cdb2b294a359e00e4a0280 Finished request 13. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=164, length=136 User-Name = "hege" Framed-MTU = 1400 Called-Station-Id = "001f.6ca9.4240" Calling-Station-Id = "001f.3cae.fb9d" Service-Type = Login-User Message-Authenticator = 0x668cc3c5df02a963ca45b4910d73e5a6 EAP-Message = 0x020500061900 NAS-Port-Type = Wireless-802.11 NAS-Port = 317 State = 0xabc8abd1a9cdb2b294a359e00e4a0280 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "ap" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "hege", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 164 to 10.0.0.1 port 1645 EAP-Message = 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 EAP-Message = 0x130e4575726f776179202d207465737430820122300d06092a864886f70d01010105000382010f003082010a0282010100bc9d773453aaedb311ec7dc7b7852ec03f93af8a86861b3f2328a3bc3cadcfb6f2a915d02c5731049e1518cd6a4bbb1174ff92e2bba1467e1c92c2de0c2fce122fcb66c84991ec9fa1c4889adf3bec2eaa5aa5049c36dccb7d35f5f1e5875e6d6159b23c928984a92acb3ae5f7993a24f8361e91539f81ed172f0cc8809d7296284cfc8ee01071afadbf69591aac279bfc2e322de8026928ce694460650a648cf05d02780daaa36de7c228c6642749778c465013d0473446e01e4ff54783ddd4ff420579650849cc01b36f8f EAP-Message = 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 EAP-Message = 0x2074657374820900beb5e5e3c2e2e2c7300c0603551d13040530030101ff300d06092a864886f70d0101050500038201010094f59def54e587375833239b06ce0ea628a11bb58e12499fef6d20bfe3bac19d9ac3aadfff76d26c6f392474c732c527c235b837fa9fbba935359a08d780700461e497a14ffd764057e152fdee967b43f6c7415f100d6c4e66881438114ab7e412ce0adb505e596ac4122d8a0a659fd675c56f454af1ac26078503542be3a72aa435196164adcf5b5982cd11b34c37b125259fa1972af2ad72882c399d674ee93e1369fae737b202821d101770c874653b4f8e92e989eaf595c6d6d25f60bef66a1176165441646dbf4df2 EAP-Message = 0x11cab218fa8f4e66 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xabc8abd1a8ceb2b294a359e00e4a0280 Finished request 14. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=165, length=136 User-Name = "hege" Framed-MTU = 1400 Called-Station-Id = "001f.6ca9.4240" Calling-Station-Id = "001f.3cae.fb9d" Service-Type = Login-User Message-Authenticator = 0x18b595cd27360479999f0e991c25c71d EAP-Message = 0x020600061900 NAS-Port-Type = Wireless-802.11 NAS-Port = 317 State = 0xabc8abd1a8ceb2b294a359e00e4a0280 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "ap" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "hege", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 165 to 10.0.0.1 port 1645 EAP-Message = 0x0107003c1900a582e6941e00fef6b97e9eb7c20a7f351fc3c8189718bac754032bc32558e95901f3e92f70956a450525bf4c2a16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xabc8abd1afcfb2b294a359e00e4a0280 Finished request 15. Going to the next request Waking up in 4.9 seconds. Cleaning up request 11 ID 161 with timestamp +870 Cleaning up request 12 ID 162 with timestamp +870 Cleaning up request 13 ID 163 with timestamp +870 Cleaning up request 14 ID 164 with timestamp +870 Cleaning up request 15 ID 165 with timestamp +870 Ready to process requests. rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=166, length=121 User-Name = "hege" Framed-MTU = 1400 Called-Station-Id = "001f.6ca9.4240" Calling-Station-Id = "001f.3cae.fb9d" Service-Type = Login-User Message-Authenticator = 0x62f213196b686d5e823d949bab404a36 EAP-Message = 0x020800090168656765 NAS-Port-Type = Wireless-802.11 NAS-Port = 317 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "ap" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "hege", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 8 length 9 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns updated [files] users: Matched entry hege at line 72 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 166 to 10.0.0.1 port 1645 EAP-Message = 0x010900061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x098c4fcb09855af82cd96723f3718fb6 Finished request 16. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=167, length=136 User-Name = "hege" Framed-MTU = 1400 Called-Station-Id = "001f.6ca9.4240" Calling-Station-Id = "001f.3cae.fb9d" Service-Type = Login-User Message-Authenticator = 0x2983d4363303f824a476baa8782b692b EAP-Message = 0x020900060319 NAS-Port-Type = Wireless-802.11 NAS-Port = 317 State = 0x098c4fcb09855af82cd96723f3718fb6 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "ap" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "hege", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 9 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns updated [files] users: Matched entry hege at line 72 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 167 to 10.0.0.1 port 1645 EAP-Message = 0x010a00061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x098c4fcb088656f82cd96723f3718fb6 Finished request 17. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=168, length=245 User-Name = "hege" Framed-MTU = 1400 Called-Station-Id = "001f.6ca9.4240" Calling-Station-Id = "001f.3cae.fb9d" Service-Type = Login-User Message-Authenticator = 0x99b461968278fe5a81b293c93aed0e28 EAP-Message = 0x020a00731980000000691603010064010000600301497086d5a0af3d70f0e565bf19123dac1c61592f51d53728637c6a778d93d432000018002f00350005000ac009c00ac013c01400320038001300040100001f00000009000700000468656765000a00080006001700180019000b00020100 NAS-Port-Type = Wireless-802.11 NAS-Port = 317 State = 0x098c4fcb088656f82cd96723f3718fb6 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "ap" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "hege", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 10 length 115 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 105 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0064], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 07e5], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 168 to 10.0.0.1 port 1645 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x09060355040613024855310f Message-Authenticator = 0x00000000000000000000000000000000 State = 0x098c4fcb0b8756f82cd96723f3718fb6 Finished request 18. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=169, length=136 User-Name = "hege" Framed-MTU = 1400 Called-Station-Id = "001f.6ca9.4240" Calling-Station-Id = "001f.3cae.fb9d" Service-Type = Login-User Message-Authenticator = 0x5d5691d12dd6b1a4449785c5ddcaf5c5 EAP-Message = 0x020b00061900 NAS-Port-Type = Wireless-802.11 NAS-Port = 317 State = 0x098c4fcb0b8756f82cd96723f3718fb6 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "ap" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "hege", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 11 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 169 to 10.0.0.1 port 1645 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x11cab218fa8f4e66 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x098c4fcb0a8056f82cd96723f3718fb6 Finished request 19. Going to the next request Waking up in 3.7 seconds. rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=170, length=136 User-Name = "hege" Framed-MTU = 1400 Called-Station-Id = "001f.6ca9.4240" Calling-Station-Id = "001f.3cae.fb9d" Service-Type = Login-User Message-Authenticator = 0xee115d56b2b421fb3b83d6291435142b EAP-Message = 0x020c00061900 NAS-Port-Type = Wireless-802.11 NAS-Port = 317 State = 0x098c4fcb0a8056f82cd96723f3718fb6 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "ap" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "hege", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 12 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 170 to 10.0.0.1 port 1645 EAP-Message = 0x010d003c1900a582e6941e00fef6b97e9eb7c20a7f351fc3c8189718bac754032bc32558e95901f3e92f70956a450525bf4c2a16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x098c4fcb0d8156f82cd96723f3718fb6 Finished request 20. Going to the next request Waking up in 2.2 seconds. rad_recv: Access-Request packet from host 10.0.0.1 port 1645, id=171, length=136 User-Name = "hege" Framed-MTU = 1400 Called-Station-Id = "001f.6ca9.4240" Calling-Station-Id = "001f.3cae.fb9d" Service-Type = Login-User Message-Authenticator = 0xfea20039d4ddf45f02b0b94dfa8e4174 EAP-Message = 0x020d00061900 NAS-Port-Type = Wireless-802.11 NAS-Port = 317 State = 0x098c4fcb0d8156f82cd96723f3718fb6 NAS-IP-Address = 10.0.0.1 NAS-Identifier = "ap" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "hege", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 13 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 171 to 10.0.0.1 port 1645 EAP-Message = 0x010e00061900 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x098c4fcb0c8256f82cd96723f3718fb6 Finished request 21. Going to the next request Waking up in 0.6 seconds. Cleaning up request 16 ID 166 with timestamp +875 Cleaning up request 17 ID 167 with timestamp +875 Cleaning up request 18 ID 168 with timestamp +875 Waking up in 1.1 seconds. Cleaning up request 19 ID 169 with timestamp +876 Waking up in 1.4 seconds. Cleaning up request 20 ID 170 with timestamp +878 Waking up in 1.6 seconds. Cleaning up request 21 ID 171 with timestamp +879 Ready to process requests. If I use TLS in the eap module

2 1