- Freeradius-Users - lists.freeradius.org

Re: Make error - Solved (not yet)
by Ted Lum 01 Dec '08

01 Dec '08

Ok, now you've opened another can of worms... First, run "rpm -qlp freeradius-server-2.1.1-0.i386.rpm" and see if the missing files are listed as actually being in the package. Their either not in there, or in there but not being deployed. It would be helpful to know which. (adjust that name for your architecture) You could also comment out the line in the %clean section. That will casue it to leave the $RPM_BUILD_ROOT in place and then you can go in and examine the structure to see if those files were put where they belong, or not. All of that should narrow down where in the process the problem is happening. Next, most of those warnings are caused by missing dependent libraries or their -devel package. They will be happening no matter how you build. rpmbuild will not magically fix them. rpmbuild and the .spec file is just a wrapper around the basic build process and it can be as elaborate, or not, as the developer chooses to make it. In the %prep section you could go crazy and test for every possible build dependency, but this one just makes the assumption that you know what you're building for and that you have installed the prerequisites you need. That said, if you don't need to talk to LDAP you can ignore: configure: WARNING: silently not building rlm_ldap. configure: WARNING: FAILURE: rlm_ldap requires: libldap_r ldap.h. ...if not, then you better go install openldap and openldap-devel. The same goes for the rest of that mess. Also, you can create a copy of the .spec file, change the header accordingly, and then change the %configure section to only build the required modules. -Ted- J Santos wrote: > I rebuilt the rpm from scratch with >> build.log and got an output of > warnings only. I am not pasting the complete log but only the warnings. > > On the other hand in the /root/rpmbuild/BUILD/freeradius-server-2.1.1 > directory there is a config.log file. On it I could find the same readline > complains that I got when trying to make from source. Shouldn't rpmbuild > take care of this ? > > I will greatly appreciate if someone could kindly take a look. I am almost > going back to 32 bits. > > I apologise for the big email. > > Thanks > > Jair Santos > > > > > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > gmake[6]: Leaving directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_sql_log' > Making install in rlm_unix... > gmake[6]: Entering directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_unix' > if [ "xrlm_unix" != "x" ]; then \ > /usr/bin/libtool --mode=install > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c \ > rlm_unix.la > /var/tmp/freeradius-server-root/usr/lib64/rlm_unix.la || exit $?; \ > rm -f > /var/tmp/freeradius-server-root/usr/lib64/rlm_unix-2.1.1.la; \ > ln -s rlm_unix.la > /var/tmp/freeradius-server-root/usr/lib64/rlm_unix-2.1.1.la || exit $?; \ > fi > libtool: install: warning: relinking `rlm_unix.la' > (cd /root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_unix; > /bin/sh /usr/bin/libtool --mode=relink gcc -release 2.1.1 -module > -export-dynamic -o rlm_unix.la -rpath /usr/lib64 rlm_unix.lo rlm_unix.c > /root/rpmbuild/BUILD/freeradius-server-2.1.1/src/lib/libfreeradius-radius.la > -lnsl -lresolv -lpthread -inst-prefix-dir /var/tmp/freeradius-server-root) > gcc -shared .libs/rlm_unix.o -L/var/tmp/freeradius-server-root/usr/lib64 > -L/usr/lib64 -lfreeradius-radius -lnsl -lresolv -lpthread -Wl,-soname > -Wl,rlm_unix-2.1.1.so -o .libs/rlm_unix-2.1.1.so > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c > .libs/rlm_unix-2.1.1.soT > /var/tmp/freeradius-server-root/usr/lib64/rlm_unix-2.1.1.so > (cd /var/tmp/freeradius-server-root/usr/lib64 && { ln -s -f > rlm_unix-2.1.1.so rlm_unix.so || { rm -f rlm_unix.so && ln -s > rlm_unix-2.1.1.so rlm_unix.so; }; }) > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c > .libs/rlm_unix.lai /var/tmp/freeradius-server-root/usr/lib64/rlm_unix.la > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c > .libs/rlm_unix.a /var/tmp/freeradius-server-root/usr/lib64/rlm_unix.a > chmod 644 /var/tmp/freeradius-server-root/usr/lib64/rlm_unix.a > ranlib /var/tmp/freeradius-server-root/usr/lib64/rlm_unix.a > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > gmake[6]: Leaving directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_unix' > Making install in rlm_policy... > gmake[6]: Entering directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_policy' > if [ "xrlm_policy" != "x" ]; then \ > /usr/bin/libtool --mode=install > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c \ > rlm_policy.la > /var/tmp/freeradius-server-root/usr/lib64/rlm_policy.la || exit $?; \ > rm -f > /var/tmp/freeradius-server-root/usr/lib64/rlm_policy-2.1.1.la; \ > ln -s rlm_policy.la > /var/tmp/freeradius-server-root/usr/lib64/rlm_policy-2.1.1.la || exit $?; \ > fi > libtool: install: warning: relinking `rlm_policy.la' > (cd /root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_policy; > /bin/sh /usr/bin/libtool --mode=relink gcc -release 2.1.1 -module > -export-dynamic -o rlm_policy.la -rpath /usr/lib64 rlm_policy.lo parse.lo > evaluate.lo rlm_policy.c parse.c evaluate.c > /root/rpmbuild/BUILD/freeradius-server-2.1.1/src/lib/libfreeradius-radius.la > -lnsl -lresolv -lpthread -inst-prefix-dir /var/tmp/freeradius-server-root) > gcc -shared .libs/rlm_policy.o .libs/parse.o .libs/evaluate.o > -L/var/tmp/freeradius-server-root/usr/lib64 -L/usr/lib64 -lfreeradius-radius > -lnsl -lresolv -lpthread -Wl,-soname -Wl,rlm_policy-2.1.1.so -o > .libs/rlm_policy-2.1.1.so > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c > .libs/rlm_policy-2.1.1.soT > /var/tmp/freeradius-server-root/usr/lib64/rlm_policy-2.1.1.so > (cd /var/tmp/freeradius-server-root/usr/lib64 && { ln -s -f > rlm_policy-2.1.1.so rlm_policy.so || { rm -f rlm_policy.so && ln -s > rlm_policy-2.1.1.so rlm_policy.so; }; }) > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c > .libs/rlm_policy.lai /var/tmp/freeradius-server-root/usr/lib64/rlm_policy.la > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c > .libs/rlm_policy.a /var/tmp/freeradius-server-root/usr/lib64/rlm_policy.a > chmod 644 /var/tmp/freeradius-server-root/usr/lib64/rlm_policy.a > ranlib /var/tmp/freeradius-server-root/usr/lib64/rlm_policy.a > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > gmake[6]: Leaving directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_policy' > Making install in rlm_dynamic_clients... > gmake[6]: Entering directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_dynamic_client > s' > if [ "xrlm_dynamic_clients" != "x" ]; then \ > /usr/bin/libtool --mode=install > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c \ > rlm_dynamic_clients.la > /var/tmp/freeradius-server-root/usr/lib64/rlm_dynamic_clients.la || exit $?; > \ > rm -f > /var/tmp/freeradius-server-root/usr/lib64/rlm_dynamic_clients-2.1.1.la; \ > ln -s rlm_dynamic_clients.la > /var/tmp/freeradius-server-root/usr/lib64/rlm_dynamic_clients-2.1.1.la || > exit $?; \ > fi > libtool: install: warning: relinking `rlm_dynamic_clients.la' > (cd > /root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_dynamic_clients > ; /bin/sh /usr/bin/libtool --mode=relink gcc -release 2.1.1 -module > -export-dynamic -o rlm_dynamic_clients.la -rpath /usr/lib64 > rlm_dynamic_clients.lo rlm_dynamic_clients.c > /root/rpmbuild/BUILD/freeradius-server-2.1.1/src/lib/libfreeradius-radius.la > -lnsl -lresolv -lpthread -inst-prefix-dir /var/tmp/freeradius-server-root) > gcc -shared .libs/rlm_dynamic_clients.o > -L/var/tmp/freeradius-server-root/usr/lib64 -L/usr/lib64 -lfreeradius-radius > -lnsl -lresolv -lpthread -Wl,-soname -Wl,rlm_dynamic_clients-2.1.1.so -o > .libs/rlm_dynamic_clients-2.1.1.so > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c > .libs/rlm_dynamic_clients-2.1.1.soT > /var/tmp/freeradius-server-root/usr/lib64/rlm_dynamic_clients-2.1.1.so > (cd /var/tmp/freeradius-server-root/usr/lib64 && { ln -s -f > rlm_dynamic_clients-2.1.1.so rlm_dynamic_clients.so || { rm -f > rlm_dynamic_clients.so && ln -s rlm_dynamic_clients-2.1.1.so > rlm_dynamic_clients.so; }; }) > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c > .libs/rlm_dynamic_clients.lai > /var/tmp/freeradius-server-root/usr/lib64/rlm_dynamic_clients.la > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c > .libs/rlm_dynamic_clients.a > /var/tmp/freeradius-server-root/usr/lib64/rlm_dynamic_clients.a > chmod 644 /var/tmp/freeradius-server-root/usr/lib64/rlm_dynamic_clients.a > ranlib /var/tmp/freeradius-server-root/usr/lib64/rlm_dynamic_clients.a > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > gmake[6]: Leaving directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_dynamic_client > s' > gmake[5]: Leaving directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules' > gmake[4]: Leaving directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules' > Making install in main... > gmake[4]: Entering directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/main' > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -d -m 755 > /var/tmp/freeradius-server-root/usr/sbin > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -d -m 755 > /var/tmp/freeradius-server-root/usr/bin > /usr/bin/libtool --mode=install > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 radiusd > /var/tmp/freeradius-server-root/usr/sbin > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 > .libs/radiusd /var/tmp/freeradius-server-root/usr/sbin/radiusd > /usr/bin/libtool --mode=install > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 radmin > /var/tmp/freeradius-server-root/usr/sbin > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 > .libs/radmin /var/tmp/freeradius-server-root/usr/sbin/radmin > /usr/bin/libtool --mode=install > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 radclient > /var/tmp/freeradius-server-root/usr/bin > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 > .libs/radclient /var/tmp/freeradius-server-root/usr/bin/radclient > /usr/bin/libtool --mode=install > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 radwho > /var/tmp/freeradius-server-root/usr/bin > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 > .libs/radwho /var/tmp/freeradius-server-root/usr/bin/radwho > /usr/bin/libtool --mode=install > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 > radconf2xml /var/tmp/freeradius-server-root/usr/bin > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 > .libs/radconf2xml /var/tmp/freeradius-server-root/usr/bin/radconf2xml > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 > checkrad.pl /var/tmp/freeradius-server-root/usr/sbin/checkrad > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 radlast > /var/tmp/freeradius-server-root/usr/bin > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 radtest > /var/tmp/freeradius-server-root/usr/bin > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 radzap > /var/tmp/freeradius-server-root/usr/bin > gmake[4]: Leaving directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/main' > gmake[3]: Leaving directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src' > gmake[2]: Leaving directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src' > Making install in raddb... > gmake[2]: Entering directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/raddb' > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -d -m 750 > /var/tmp/freeradius-server-root/etc/raddb > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -d -m 750 > /var/tmp/freeradius-server-root/etc/raddb/sites-available > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -d -m 750 > /var/tmp/freeradius-server-root/etc/raddb/sites-enabled > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -d -m 750 > /var/tmp/freeradius-server-root/etc/raddb/modules > Creating/updating files in /var/tmp/freeradius-server-root/etc/raddb > chmod 640 /var/tmp/freeradius-server-root/etc/raddb/clients.conf > if [ ! -d /var/tmp/freeradius-server-root/etc/raddb/certs ]; then \ > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c > -d -m 750 /var/tmp/freeradius-server-root/etc/raddb/certs; \ > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c > -m 750 certs/bootstrap /var/tmp/freeradius-server-root/etc/raddb/certs; \ > for i in Makefile README xpextensions ca.cnf server.cnf > client.cnf; do \ > > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 640 certs/$i > /var/tmp/freeradius-server-root/etc/raddb/certs; \ > done; \ > fi > if [ ! -d /var/tmp/freeradius-server-root/etc/raddb/sql ]; then \ > find sql -name CVS -prune -o -print | \ > while read file; do \ > if [ -d "$file" ]; then \ > > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -d -m 750 > "/var/tmp/freeradius-server-root/etc/raddb/$file"; \ > else \ > > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 640 "$file" > "/var/tmp/freeradius-server-root/etc/raddb/$file"; \ > fi; \ > done; \ > fi > if [ ! -f /var/tmp/freeradius-server-root/etc/raddb/sites-enabled/default ]; > then \ > cd /var/tmp/freeradius-server-root/etc/raddb/sites-enabled/; > \ > ln -s ../sites-available/default; \ > fi > if [ ! -f > /var/tmp/freeradius-server-root/etc/raddb/sites-enabled/inner-tunnel ]; then > \ > cd /var/tmp/freeradius-server-root/etc/raddb/sites-enabled/; > \ > ln -s ../sites-available/inner-tunnel; \ > fi > gmake[2]: Leaving directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/raddb' > Making install in scripts... > gmake[2]: Entering directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/scripts' > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 rc.radiusd > /var/tmp/freeradius-server-root/usr/sbin > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 > radsqlrelay /var/tmp/freeradius-server-root/usr/bin > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 radwatch > /var/tmp/freeradius-server-root/usr/sbin > gmake[2]: Leaving directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/scripts' > Making install in doc... > gmake[2]: Entering directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/doc' > gmake[3]: Entering directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/doc' > Making install in examples... > gmake[4]: Entering directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/doc/examples' > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -d -m 755 > /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1/exampl > es > for file in *[!~]; do \ > if [ -f $file -a $file != Makefile ]; then \ > > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 644 $file > /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1/exampl > es; \ > fi; \ > done > gmake[4]: Leaving directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/doc/examples' > Making install in rfc... > gmake[4]: Entering directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/doc/rfc' > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -d -m 755 > /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1/rfc > for file in `ls -1 *.txt *.html`; do \ > /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c > -m 644 $file > /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1/rfc; \ > done > gmake[4]: Leaving directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/doc/rfc' > gmake[3]: Leaving directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/doc' > gmake[2]: Leaving directory > `/root/rpmbuild/BUILD/freeradius-server-2.1.1/doc' > gmake[1]: Leaving directory `/root/rpmbuild/BUILD/freeradius-server-2.1.1' > Installing dictionary files in > /var/tmp/freeradius-server-root/usr/share/freeradius > /usr/bin/libtool --finish /var/tmp/freeradius-server-root/usr/lib64 > PATH="$PATH:/sbin" ldconfig -n /var/tmp/freeradius-server-root/usr/lib64 > ---------------------------------------------------------------------- > Libraries have been installed in: > /var/tmp/freeradius-server-root/usr/lib64 > > If you ever happen to want to link against installed libraries > in a given directory, LIBDIR, you must either use libtool, and > specify the full pathname of the library, or use the `-LLIBDIR' > flag during linking and do at least one of the following: > - add LIBDIR to the `LD_LIBRARY_PATH' environment variable > during execution > - add LIBDIR to the `LD_RUN_PATH' environment variable > during linking > - use the `-Wl,--rpath -Wl,LIBDIR' linker flag > - have your system administrator add LIBDIR to `/etc/ld.so.conf' > > See any operating system documentation about shared libraries for > more information, such as the ld(1) and ld.so(8) manual pages. > ---------------------------------------------------------------------- > + RADDB=/var/tmp/freeradius-server-root/etc/raddb > + perl -i -pe 's/^#user =.*$/user = radiusd/' > /var/tmp/freeradius-server-root/etc/raddb/radiusd.conf > + perl -i -pe 's/^#group =.*$/group = radiusd/' > /var/tmp/freeradius-server-root/etc/raddb/radiusd.conf > + perl -i -pe 's/# shadow =/shadow =/' > /var/tmp/freeradius-server-root/etc/raddb/radiusd.conf > + rm -f /var/tmp/freeradius-server-root/usr/sbin/rc.radiusd > + install -m 0644 CREDITS > /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1 > + install -m 0644 COPYRIGHT > /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1 > + install -m 0644 LICENSE > /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1 > + cd redhat > + install -m 755 rc.radiusd-redhat > /var/tmp/freeradius-server-root/etc/rc.d/init.d/radiusd > + install -m 644 radiusd-logrotate > /var/tmp/freeradius-server-root/etc/logrotate.d/radiusd > + install -m 644 radiusd-pam > /var/tmp/freeradius-server-root/etc/pam.d/radius > + cd .. > + /usr/lib/rpm/brp-compress > + /usr/lib/rpm/brp-strip > + /usr/lib/rpm/brp-strip-static-archive > strip: Unable to recognise the format of the input file > `/var/tmp/freeradius-server-root/usr/lib64/rlm_perl.a(DynaLoader.a)' > strip: Unable to recognise the format of the input file > `/var/tmp/freeradius-server-root/usr/lib64/rlm_perl.a(DynaLoader.a)' > + /usr/lib/rpm/brp-strip-comment-note > Processing files: freeradius-server-2.1.1-0 > Provides: config(freeradius-server) = 2.1.1-0 > libfreeradius-eap-2.1.1.so()(64bit) libfreeradius-radius-2.1.1.so()(64bit) > radiusd rlm_acct_unique-2.1.1.so()(64bit) rlm_acctlog-2.1.1.so()(64bit) > rlm_always-2.1.1.so()(64bit) rlm_attr_filter-2.1.1.so()(64bit) > rlm_attr_rewrite-2.1.1.so()(64bit) rlm_chap-2.1.1.so()(64bit) > rlm_checkval-2.1.1.so()(64bit) rlm_copy_packet-2.1.1.so()(64bit) > rlm_detail-2.1.1.so()(64bit) rlm_digest-2.1.1.so()(64bit) > rlm_dynamic_clients-2.1.1.so()(64bit) rlm_eap-2.1.1.so()(64bit) > rlm_eap_gtc-2.1.1.so()(64bit) rlm_eap_leap-2.1.1.so()(64bit) > rlm_eap_md5-2.1.1.so()(64bit) rlm_eap_mschapv2-2.1.1.so()(64bit) > rlm_eap_peap-2.1.1.so()(64bit) rlm_eap_sim-2.1.1.so()(64bit) > rlm_eap_tls-2.1.1.so()(64bit) rlm_eap_ttls-2.1.1.so()(64bit) > rlm_exec-2.1.1.so()(64bit) rlm_expiration-2.1.1.so()(64bit) > rlm_expr-2.1.1.so()(64bit) rlm_fastusers-2.1.1.so()(64bit) > rlm_files-2.1.1.so()(64bit) rlm_krb5-2.1.1.so()(64bit) > rlm_linelog-2.1.1.so()(64bit) rlm_logintime-2.1.1.so()(64bit) > rlm_mschap-2.1.1.so()(64bit) rlm_otp-2.1.1.so()(64bit) > rlm_pap-2.1.1.so()(64bit) rlm_passwd-2.1.1.so()(64bit) > rlm_perl-2.1.1.so()(64bit) rlm_policy-2.1.1.so()(64bit) > rlm_preprocess-2.1.1.so()(64bit) rlm_radutmp-2.1.1.so()(64bit) > rlm_realm-2.1.1.so()(64bit) rlm_sql-2.1.1.so()(64bit) > rlm_sql_log-2.1.1.so()(64bit) rlm_sql_mysql-2.1.1.so()(64bit) > rlm_sqlcounter-2.1.1.so()(64bit) rlm_sqlippool-2.1.1.so()(64bit) > rlm_unix-2.1.1.so()(64bit) > Requires(interp): /bin/sh /bin/sh /bin/sh /bin/sh > Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 > rpmlib(PayloadFilesHavePrefix) <= 4.0-1 > Requires(pre): /bin/sh > Requires(post): /bin/sh > Requires(preun): /bin/sh > Requires(postun): /bin/sh > Requires: /bin/sh /usr/bin/perl config(freeradius-server) = 2.1.1-0 > ld-linux-x86-64.so.2()(64bit) ld-linux-x86-64.so.2(GLIBC_2.3)(64bit) > libc.so.6()(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3)(64bit) > libc.so.6(GLIBC_2.3.4)(64bit) libcom_err.so.2()(64bit) > libcrypt.so.1()(64bit) libcrypt.so.1(GLIBC_2.2.5)(64bit) > libcrypto.so.6()(64bit) libdl.so.2()(64bit) libdl.so.2(GLIBC_2.2.5)(64bit) > libfreeradius-eap-2.1.1.so()(64bit) libfreeradius-radius-2.1.1.so()(64bit) > libk5crypto.so.3()(64bit) libkrb5.so.3()(64bit) > libkrb5.so.3(krb5_3_MIT)(64bit) libltdl.so.3()(64bit) libm.so.6()(64bit) > libmysqlclient_r.so.15()(64bit) > libmysqlclient_r.so.15(libmysqlclient_15)(64bit) libnsl.so.1()(64bit) > libperl.so()(64bit) libpthread.so.0()(64bit) > libpthread.so.0(GLIBC_2.2.5)(64bit) libresolv.so.2()(64bit) > libssl.so.6()(64bit) libutil.so.1()(64bit) libz.so.1()(64bit) perl(DBI) > perl(Fcntl) perl(Getopt::Std) perl(POSIX) perl(strict) perl(warnings) > rlm_acct_unique-2.1.1.so()(64bit) rlm_acctlog-2.1.1.so()(64bit) > rlm_always-2.1.1.so()(64bit) rlm_attr_filter-2.1.1.so()(64bit) > rlm_attr_rewrite-2.1.1.so()(64bit) rlm_chap-2.1.1.so()(64bit) > rlm_checkval-2.1.1.so()(64bit) rlm_copy_packet-2.1.1.so()(64bit) > rlm_detail-2.1.1.so()(64bit) rlm_digest-2.1.1.so()(64bit) > rlm_dynamic_clients-2.1.1.so()(64bit) rlm_eap-2.1.1.so()(64bit) > rlm_eap_gtc-2.1.1.so()(64bit) rlm_eap_leap-2.1.1.so()(64bit) > rlm_eap_md5-2.1.1.so()(64bit) rlm_eap_mschapv2-2.1.1.so()(64bit) > rlm_eap_peap-2.1.1.so()(64bit) rlm_eap_sim-2.1.1.so()(64bit) > rlm_eap_tls-2.1.1.so()(64bit) rlm_eap_ttls-2.1.1.so()(64bit) > rlm_exec-2.1.1.so()(64bit) rlm_expiration-2.1.1.so()(64bit) > rlm_expr-2.1.1.so()(64bit) rlm_fastusers-2.1.1.so()(64bit) > rlm_files-2.1.1.so()(64bit) rlm_krb5-2.1.1.so()(64bit) > rlm_linelog-2.1.1.so()(64bit) rlm_logintime-2.1.1.so()(64bit) > rlm_mschap-2.1.1.so()(64bit) rlm_otp-2.1.1.so()(64bit) > rlm_pap-2.1.1.so()(64bit) rlm_passwd-2.1.1.so()(64bit) > rlm_perl-2.1.1.so()(64bit) rlm_policy-2.1.1.so()(64bit) > rlm_preprocess-2.1.1.so()(64bit) rlm_radutmp-2.1.1.so()(64bit) > rlm_realm-2.1.1.so()(64bit) rlm_sql-2.1.1.so()(64bit) > rlm_sql_log-2.1.1.so()(64bit) rlm_sql_mysql-2.1.1.so()(64bit) > rlm_sqlcounter-2.1.1.so()(64bit) rlm_sqlippool-2.1.1.so()(64bit) > rlm_unix-2.1.1.so()(64bit) rtld(GNU_HASH) > Conflicts: cistron-radius > Checking for unpackaged file(s): /usr/lib/rpm/check-files > /var/tmp/freeradius-server-root > Wrote: /root/rpmbuild/RPMS/x86_64/freeradius-server-2.1.1-0.x86_64.rpm > Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.50908 > + umask 022 > + cd /root/rpmbuild/BUILD > + cd freeradius-server-2.1.1 > + '[' /var/tmp/freeradius-server-root '!=' / ']' > + rm -rf /var/tmp/freeradius-server-root > + exit 0 > [root@maui SPECS]# rpmbuild -bb freeradius.spec >> build.log > + umask 022 > + cd /root/rpmbuild/BUILD > + cd /root/rpmbuild/BUILD > + rm -rf freeradius-server-2.1.1 > + /bin/gzip -dc /root/rpmbuild/SOURCES/freeradius-server-2.1.1.tar.gz > + tar -xvvf - > + STATUS=0 > + '[' 0 -ne 0 ']' > + cd freeradius-server-2.1.1 > ++ /usr/bin/id -u > + '[' 0 = 0 ']' > + /bin/chown -Rhf root . > ++ /usr/bin/id -u > + '[' 0 = 0 ']' > + /bin/chgrp -Rhf root . > + /bin/chmod -Rf a+rX,u+w,g-w,o-w . > + exit 0 > + umask 022 > + cd /root/rpmbuild/BUILD > + cd freeradius-server-2.1.1 > + CFLAGS='-O2 -g' > + CFLAGS='-O2 -g' > + export CFLAGS > + CXXFLAGS='-O2 -g' > + export CXXFLAGS > + FFLAGS='-O2 -g' > + export FFLAGS > + ./configure --host=x86_64-redhat-linux-gnu --build=x86_64-redhat-linux-gnu > --target=x86_64-redhat-linux --program-prefix= --prefix=/usr > --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc > --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 > --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com > --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr > --localstatedir=/var --sysconfdir=/etc --mandir=/usr/share/man > --with-docdir=/usr/share/doc/freeradius-server-2.1.1 --with-system-libtool > --disable-ltdl-install --with-ltdl-lib=/usr/lib > --with-ltdl-include=/usr/include --with-large-files --with-udpfromto > --with-edir --with-rlm-sql_postgresql-include-dir=/usr/include/pgsql > --with-rlm-krb5-include-dir=/usr/kerberos/include > --with-rlm-krb5-lib-dir=/usr/kerberos/lib > configure: WARNING: pcap library not found, silently disabling the RADIUS > sniffer. > config.status: WARNING: ./Make.inc.in seems to ignore the --datarootdir > setting > config.status: WARNING: ./src/include/build-radpaths-h.in seems to ignore > the --datarootdir setting > configure: WARNING: silently not building rlm_counter. > configure: WARNING: FAILURE: rlm_counter requires: libgdbm. > configure: WARNING: FAILURE: rlm_dbm requires: (ndbm.h or gdbm/ndbm.h or > gdbm-ndbm.h) (libndbm or libgdbm or libgdbm_compat). > configure: WARNING: silently not building rlm_dbm. > configure: WARNING: the TNCS library isn't found! > configure: WARNING: silently not building rlm_eap_tnc. > configure: WARNING: FAILURE: rlm_eap_tnc requires: -lTNCS. > configure: WARNING: silently not building rlm_eap_ikev2. > configure: WARNING: FAILURE: rlm_eap_ikev2 requires: libeap-ikev2 > EAPIKEv2/connector.h. > configure: WARNING: silently not building rlm_ippool. > configure: WARNING: FAILURE: rlm_ippool requires: libgdbm. > configure: WARNING: silently not building rlm_ldap. > configure: WARNING: FAILURE: rlm_ldap requires: libldap_r ldap.h. > configure: WARNING: silently not building rlm_pam. > configure: WARNING: FAILURE: rlm_pam requires: libpam. > configure: WARNING: silently not building rlm_python. > configure: WARNING: FAILURE: rlm_python requires: Python.h. > configure: WARNING: silently not building rlm_sql_iodbc. > configure: WARNING: FAILURE: rlm_sql_iodbc requires: libiodbc isql.h. > configure: WARNING: silently not building rlm_sql_postgresql. > configure: WARNING: FAILURE: rlm_sql_postgresql requires: libpq-fe.h libpq. > configure: WARNING: oracle headers not found. Use > --with-oracle-home-dir=<path>. > configure: WARNING: silently not building rlm_sql_oracle. > configure: WARNING: FAILURE: rlm_sql_oracle requires: oci.h. > configure: WARNING: silently not building rlm_sql_unixodbc. > configure: WARNING: FAILURE: rlm_sql_unixodbc requires: sql.h. > + make > radius.c: In function 'vp2data': > radius.c:680: warning: passing argument 2 of 'make_passwd' from incompatible > pointer type > radius.c:706: warning: passing argument 2 of 'make_tunnel_passwd' from > incompatible pointer type > radius.c:713: warning: passing argument 2 of 'make_tunnel_passwd' from > incompatible pointer type > rlm_eap_gtc.c: In function 'gtc_authenticate': > rlm_eap_gtc.c:203: warning: format '%d' expects type 'int', but argument 2 > has type 'size_t' > rlm_eap_gtc.c:203: warning: format '%d' expects type 'int', but argument 3 > has type 'size_t' > rlm_eap_sim.c: In function 'eap_sim_getchalans': > rlm_eap_sim.c:159: warning: format '%d' expects type 'int', but argument 3 > has type 'size_t' > rlm_eap_sim.c:172: warning: format '%d' expects type 'int', but argument 3 > has type 'size_t' > rlm_eap_sim.c:185: warning: format '%d' expects type 'int', but argument 3 > has type 'size_t' > rlm_eap_sim.c: In function 'process_eap_sim_start': > rlm_eap_sim.c:471: warning: format '%d' expects type 'int', but argument 2 > has type 'size_t' > radeapclient.c: In function 'process_eap_start': > radeapclient.c:292: warning: format '%d' expects type 'int', but argument 3 > has type 'size_t' > radeapclient.c:302: warning: format '%d' expects type 'int', but argument 4 > has type 'size_t' > radeapclient.c: In function 'respond_eap_md5': > radeapclient.c:759: warning: format '%d' expects type 'int', but argument 3 > has type 'size_t' > radeapclient.c:759: warning: format '%d' expects type 'int', but argument 4 > has type 'size_t' > rlm_krb5.c: In function 'verify_krb5_tgt': > rlm_krb5.c:98: warning: passing argument 2 of 'krb5_kt_read_service_key' > discards qualifiers from pointer target type > rlm_mschap.c: In function 'mschap_detach': > rlm_mschap.c:633: warning: passing argument 1 of 'free' discards qualifiers > from pointer target type > otp_rlm.c: In function 'otp_instantiate': > otp_rlm.c:84: warning: pointer targets in passing argument 1 of > 'otp_get_random' differ in signedness > otp_rlm.c: In function 'otp_authorize': > otp_rlm.c:247: warning: pointer targets in passing argument 3 of > 'otp_gen_state' differ in signedness > otp_rlm.c: In function 'otp_authenticate': > otp_rlm.c:340: warning: pointer targets in passing argument 1 of 'otp_a2x' > differ in signedness > otp_rlm.c:375: warning: pointer targets in passing argument 3 of > 'otp_pw_valid' differ in signedness > otp_radstate.c: In function 'otp_gen_state': > otp_radstate.c:145: warning: pointer targets in passing argument 1 of > 'otp_x2a' differ in signedness > otp_util.c: In function 'otp_async_challenge': > otp_util.c:63: warning: pointer targets in passing argument 1 of > 'otp_get_random' differ in signedness > otp_mppe.c: In function 'otp_mppe': > otp_mppe.c:419: warning: pointer targets in passing argument 1 of 'sprintf' > differ in signedness > otp_mppe.c:421: warning: pointer targets in passing argument 2 of 'pairmake' > differ in signedness > otp_mppe.c:461: warning: pointer targets in passing argument 1 of 'sprintf' > differ in signedness > otp_mppe.c:463: warning: pointer targets in passing argument 2 of 'pairmake' > differ in signedness > rlm_pap.c: In function 'pap_authenticate': > rlm_pap.c:714: warning: pointer targets in passing argument 1 of > 'radius_xlat' differ in signedness > rlm_pap.c:719: warning: pointer targets in passing argument 1 of > 'fr_hex2bin' differ in signedness > rlm_pap.c:739: warning: pointer targets in passing argument 1 of > 'radius_xlat' differ in signedness > rlm_pap.c:744: warning: pointer targets in passing argument 1 of > 'fr_hex2bin' differ in signedness > rlm_pap.c:770: warning: pointer targets in passing argument 2 of > 'fr_hex2bin' differ in signedness > rlm_perl.c: In function 'perl_xlat': > rlm_perl.c:639: warning: ISO C90 forbids mixed declarations and code > rlm_perl.c:674: warning: value computed is not used > rlm_perl.c:681: warning: format '%d' expects type 'int', but argument 3 has > type 'size_t' > rlm_perl.c:681: warning: format '%d' expects type 'int', but argument 5 has > type 'size_t' > rlm_perl.c: In function 'rlmperl_call': > rlm_perl.c:1023: warning: value computed is not used > rlm_policy.c: In function 'policy_instantiate': > rlm_policy.c:103: warning: passing argument 2 of 'rbtree_create' from > incompatible pointer type > rlm_policy.c: In function 'rlm_policy_free_item': > rlm_policy.c:265: warning: passing argument 1 of 'free' discards qualifiers > from pointer target type > rlm_policy.c:275: warning: passing argument 1 of 'free' discards qualifiers > from pointer target type > parse.c: In function 'parse_named_policy': > parse.c:1535: warning: passing argument 1 of 'rlm_policy_print' from > incompatible pointer type > listen.c: In function 'client_listener_find': > listen.c:141: warning: passing argument 1 of 'listener->print' discards > qualifiers from pointer target type > listen.c:220: warning: assignment discards qualifiers from pointer target > type > In file included from listen.c:1024: > command.c: In function 'command_show_client_config': > command.c:805: warning: passing argument 2 of 'cf_section2file' discards > qualifiers from pointer target type > listen.c: In function 'listen_bind': > listen.c:1175: warning: implicit declaration of function 'udpfromto_init' > log.c: In function 'radlog_request': > log.c:386: warning: assignment discards qualifiers from pointer target type > radiusd.c: In function 'main': > radiusd.c:159: warning: passing argument 1 of 'free' discards qualifiers > from pointer target type > radiusd.c:441: warning: passing argument 1 of 'free' discards qualifiers > from pointer target type > xlat.c: In function 'xlat_packet': > xlat.c:185: warning: format '%d' expects type 'int', but argument 4 has type > 'size_t' > xlat.c:185: warning: format '%d' expects type 'int', but argument 4 has type > 'size_t' > xlat.c: In function 'xlat_register': > xlat.c:514: warning: passing argument 3 of 'xlat_register' discards > qualifiers from pointer target type > xlat.c:523: warning: passing argument 3 of 'xlat_register' discards > qualifiers from pointer target type > xlat.c:535: warning: passing argument 3 of 'xlat_register' discards > qualifiers from pointer target type > xlat.c:543: warning: passing argument 3 of 'xlat_register' discards > qualifiers from pointer target type > event.c: In function 'request_pre_handler': > event.c:1247: warning: passing argument 4 of 'radius_evaluate_condition' > from incompatible pointer type > + exit 0 > + umask 022 > + cd /root/rpmbuild/BUILD > + cd freeradius-server-2.1.1 > + '[' /var/tmp/freeradius-server-root '!=' / ']' > + rm -rf /var/tmp/freeradius-server-root > + mkdir -p /var/tmp/freeradius-server-root/etc/logrotate.d > /var/tmp/freeradius-server-root/etc/pam.d > /var/tmp/freeradius-server-root/etc/rc.d/init.d > + make install R=/var/tmp/freeradius-server-root > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_acctlog.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_acct_unique.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_always.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_attr_filter.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_attr_rewrite.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_chap.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_checkval.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_copy_packet.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_detail.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_digest.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `libfreeradius-eap.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_eap_gtc.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_eap_leap.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_eap_md5.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_eap_mschapv2.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_eap_peap.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_eap_sim.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_eap_tls.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_eap_ttls.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_eap.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_exec.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_expiration.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_expr.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_fastusers.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_files.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_krb5.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_linelog.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_logintime.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_mschap.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_otp.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_pap.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_passwd.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_perl.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_preprocess.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_radutmp.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_realm.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_sql.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_sqlcounter.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_sqlippool.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_sql_log.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_unix.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_policy.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > libtool: install: warning: relinking `rlm_dynamic_clients.la' > libtool: install: warning: remember to run `libtool --finish /usr/lib64' > + RADDB=/var/tmp/freeradius-server-root/etc/raddb > + perl -i -pe 's/^#user =.*$/user = radiusd/' > /var/tmp/freeradius-server-root/etc/raddb/radiusd.conf > + perl -i -pe 's/^#group =.*$/group = radiusd/' > /var/tmp/freeradius-server-root/etc/raddb/radiusd.conf > + perl -i -pe 's/# shadow =/shadow =/' > /var/tmp/freeradius-server-root/etc/raddb/radiusd.conf > + rm -f /var/tmp/freeradius-server-root/usr/sbin/rc.radiusd > + install -m 0644 CREDITS > /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1 > + install -m 0644 COPYRIGHT > /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1 > + install -m 0644 LICENSE > /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1 > + cd redhat > + install -m 755 rc.radiusd-redhat > /var/tmp/freeradius-server-root/etc/rc.d/init.d/radiusd > + install -m 644 radiusd-logrotate > /var/tmp/freeradius-server-root/etc/logrotate.d/radiusd > + install -m 644 radiusd-pam > /var/tmp/freeradius-server-root/etc/pam.d/radius > + cd .. > + /usr/lib/rpm/brp-compress > + /usr/lib/rpm/brp-strip > + /usr/lib/rpm/brp-strip-static-archive > strip: Unable to recognise the format of the input file > `/var/tmp/freeradius-server-root/usr/lib64/rlm_perl.a(DynaLoader.a)' > strip: Unable to recognise the format of the input file > `/var/tmp/freeradius-server-root/usr/lib64/rlm_perl.a(DynaLoader.a)' > + /usr/lib/rpm/brp-strip-comment-note > + umask 022 > + cd /root/rpmbuild/BUILD > + cd freeradius-server-2.1.1 > + '[' /var/tmp/freeradius-server-root '!=' / ']' > + rm -rf /var/tmp/freeradius-server-root > + exit 0 > [root@maui SPECS]# > > > > > > -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

1 0

Restricting user to specific NAS Port
by Sean Preston 01 Dec '08

01 Dec '08

Hi I have gone through the archives and either I am searching on the wrong terms or there is not much on this topic. I am using FreeRadius 1.1.3 on Debian with a database backend to FreeRadius and I need to restrict some ADSL users to specific NAS Ports. I found that adding an entry to radcheck like: blah1(a)example.com NAS-Port-Id == abc restricts the user to this port Now how do I add additional NAS ports so that they still authenticate because the same useraccount needs to be able to log in from multiple NAS ports. I tried putting in multiple entries but it does not seem to work. I get an authentication accepted response for the first port and then additional ones always reject. Any help or pointers would be greatly appreciated. Regards Sean -- Sean Preston

5 10

Re: Make error - Solved (not yet)
by Ted Lum 01 Dec '08

01 Dec '08

No. /etc/init.d is a symlink. lrwxrwxrwx 1 root root 11 Nov 11 09:12 init.d -> rc.d/init.d It won't exist in $RPM_BUILD_ROOT since that is a temp structure that will get packaged. It won't have symlinks so you can't reference them. The actual directory structure is created at line 46. You don't seem to have any of the items that are copied in by the "install" command. Are you sure that coreutils package is there and that "install" works? I can't help wondering if there are any utilities in the x86_64 that have not caught up with the i386 version that's causing this to fail. I've never built any x86_64 packages so I can't personally say I've ever seen it work. -Ted- J Santos wrote: > Line 66 is > > install -m 755 rc.radiusd-redhat $RPM_BUILD_ROOT/etc/rc.d/init.d/radiusd > > Shouldn't it be > > install -m 755 rc.radiusd-redhat $RPM_BUILD_ROOT/etc/init.d/radiusd > instead ? > > > The init script is not on /etc/rc.d/init.d either > > > > > >> -----Original Message----- >> From: Ted Lum [mailto:freeradius.org@tedworld.com] >> Sent: Monday, December 01, 2008 10:13 AM >> To: J Santos; FreeRadius users mailing list >> Subject: Re: Make error - Solved (not yet) >> >> >> Do you have the coreutils package installed? Is "install" >> there? If not, >> it will not build the rpm structure correctly, see .spec file >> line 66. >> That won't affect the base server operation but it will keep the >> supplemental files from being added to the rpm... which means >> you have >> to set it all up manually and have lost some of the advantage of the >> package. >> >> Personally, I build on a dedicated build machine that has all the >> requirements and then simply deploy from a local repository to the >> target... whether it be test or production. That saves having >> to figure >> out the build environment every time and keeps compilers out off >> production boxes. >> >> -Ted- >> >> >> J Santos wrote: >> >>> I had no errors other than the missing directories that I had to >>> manually create. >>> >>> radiusd is uder /etc/logrotate.d >>> >>> -rw-r--r-- 1 root root 1106 Dec 1 09:15 radiusd >>> >>> and >>> >>> radius is under (not radiusd) >>> >>> /etc/pam.d >>> >>> -rw-r--r-- 1 root root 360 Dec 1 09:15 radius >>> >>> >>> It looks like the missing directories is a permission issue >>> >> but I was >> >>> working as root. >>> >>> The server runs fine. Anything else I should check ? >>> >>> Thanks >>> >>> Jair Santos >>> >>> >>> >>> >>> >>> >>> >>> >>> >>>> -----Original Message----- >>>> From: Ted Lum [mailto:freeradius.org@tedworld.com] >>>> Sent: Monday, December 01, 2008 9:46 AM >>>> To: J Santos >>>> Subject: Re: Make error - Solved >>>> >>>> >>>> It sounds like something went wrong in the rpmbuild. That >>>> script should >>>> have been included. The base script is included in >>>> >>>> >> "~/rpmbuild/BUILD/freeradius-server-2.1.1/redhat/rc.radiusd-redhat". >> >>>> That should have been installed @ >>>> >> "/etc/rc.d/init.d/radiusd". It not, >> >>>> check that you got "radiusd" under "/etc/logrotate.d" and >>>> "/etc/pam.d", >>>> those might be missing too. Again, you should not have to >>>> >> create that >> >>>> stuff manually. That's part of the advantage of a package and >>>> it should >>>> be there if the package built correctly. >>>> >>>> -Ted- >>>> >>>> J Santos wrote: >>>> >>>> >>>>> Hi all, >>>>> >>>>> I 've succesfully built the freeradius-server-2.1.1-0.x86_64.rpm. >>>>> >>>>> I only had to manually create the directories RPMS, >>>>> >>>>> >>>> SOURCEs, SPECS >>>> >>>> >>>>> and x86_64 during the process. >>>>> >>>>> When installing I had to uninstall version 1.1.3 because of >>>>> >>>>> >>>> conflicts >>>> >>>> >>>>> but once I did it the rpm worked smoothly. >>>>> >>>>> My only problem now is that I don't have the init script on >>>>> /etc/init.d. >>>>> >>>>> Does anybody know where I can get it from ? >>>>> >>>>> And, I am just wondering if we could make this rpm >>>>> >>>>> >>>> available for other >>>> >>>> >>>>> people to use it. >>>>> >>>>> Thanks >>>>> >>>>> Jair Santos >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>> -----Original Message----- >>>>>> From: Ted Lum [mailto:freeradius.org@tedworld.com] >>>>>> Sent: Saturday, November 29, 2008 7:19 PM >>>>>> To: J Santos; 'FreeRadius users mailing list' >>>>>> Subject: Re: Make error - Solved >>>>>> >>>>>> >>>>>> Don't know. If you look in the .spec file you'll see what >>>>>> >>>>>> >>>> additional >>>> >>>> >>>>>> work is done in the package that isn't done otherwise. In >>>>>> >>>>>> >>>> addition to >>>> >>>> >>>>>> init.d you may need to deal with logrotate.d and pam.d, >>>>>> >>>>>> >>>> ldconfig and >>>> >>>> >>>>>> chkconfig, not to mention the users and groups it creates >>>>>> >>>>>> >>>> or the log >>>> >>>> >>>>>> files it customizes. You can do all this configuration by >>>>>> >>>>>> >>>> hand if you >>>> >>>> >>>>>> know what to do, but its a lot of extra work. This is why >>>>>> >>>>>> >>>> its a good >>>> >>>> >>>>>> idea to do an rpmbuild and install the package. It should >>>>>> deal with the >>>>>> existing version as well as enable a proper upgrade when a >>>>>> new version >>>>>> becomes available in the repository. Simply building from >>>>>> source may not >>>>>> be compatible with the previous version that's already there or >>>>>> compatible with any upgrade because the package has >>>>>> >>>>>> >>>> additional things >>>> >>>> >>>>>> and sometimes has them in different places. Just my opinion but I >>>>>> strongly discourage not using packages for applications >>>>>> already in the >>>>>> distros repository. >>>>>> >>>>>> J Santos wrote: >>>>>> >>>>>> >>>>>> >>>>>>> Thank you. >>>>>>> >>>>>>> Actually the server is running very well now. >>>>>>> >> Investigating more I >> >>>>>>> realized that version 1.13 is still there but in different >>>>>>> directories, so when I set to start on boot it will run >>>>>>> >>>>>>> >>>>>>> >>>>>> version 1.13. >>>>>> >>>>>> >>>>>> >>>>>>> Does anybody know if it is only a matter of changing >>>>>>> >> the radiusd >> >>>>>>> script on /etc/init.d to point to version 2.1 daemon and >>>>>>> >>>>>>> >>>>>>> >>>>>> conf files ? >>>>>> >>>>>> >>>>>> >>>>>>> Or there is anything elese that I have to do ? >>>>>>> >>>>>>> Jair Santos >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> -----Original Message----- >>>>>>>> From: >>>>>>>> freeradius-users-bounces+jsantos5954=gmail.com(a)lists.freeradiu >>>>>>>> s.org >>>>>>>> [mailto:freeradius-users-bounces+jsantos5954=gmail.com@lists.f >>>>>>>> reeradius.org] On Behalf Of Ted Lum >>>>>>>> Sent: Saturday, November 29, 2008 12:04 PM >>>>>>>> To: FreeRadius users mailing list >>>>>>>> Subject: Re: Make error - Solved >>>>>>>> >>>>>>>> >>>>>>>> I assume that you are referring to a build from source >>>>>>>> >>>>>>>> >>>> as opposed >>>> >>>> >>>>>>>> to an rpmbuild from source? >>>>>>>> >>>>>>>> If that's the case you would want to review this: >>>>>>>> http://wiki.freeradius.org/Build#Building_RedHat_packages >>>>>>>> >>>>>>>> -Ted- >>>>>>>> >>>>>>>> Olavo wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> Hi all, >>>>>>>>> >>>>>>>>> I am posting this so it can save some headaches for other >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> people in >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> the future. >>>>>>>>> >>>>>>>>> I've been trying to install FR on a 64 bits OS for a >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>> while. First I >>>>>> >>>>>> >>>>>> >>>>>>>>> tried RH 5.2 and I got the following errors >>>>>>>>> >>>>>>>>> /usr/bin/libtool --mode=link gcc -o radmin >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>> radmin.lo /usr/lib/libreadline.so /usr/lib64/libtermcap.so >>>>>>>>>>> >>>>>>>>>>> >> /usr/src/redhat/BUILD/freeradius-2.1.1/src/lib/libfreeradius- >> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> radius.la >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> util.lo log.lo conffile.lo -lnsl -lresolv -lpthread >>>>>>>>>>> >>>>>>>>>>> >>>> -lreadline >>>> >>>> >>>>>>>>>>> -ltermcap gcc -o .libs/radmin .libs/radmin.o >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> /usr/lib/libreadline.so >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> /usr/lib64/libtermcap.so .libs/util.o .libs/log.o >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>> .libs/conffile.o >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >> /usr/src/redhat/BUILD/freeradius-2.1.1/src/lib/.libs/libfreer >> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>> adius-radi >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>> us.s >>>>>>>>>>> o -lnsl -lresolv -lpthread -lreadline -ltermcap >>>>>>>>>>> /usr/lib/libreadline.so: could not read symbols: File in >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> wrong format >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> collect2: ld returned 1 exit status >>>>>>>>>>> gmake[4]: *** [radmin] Error 1 >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>> Then I move on to CentOs since Greg Woods informed that he >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> is using it >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> without any grief. >>>>>>>>> >>>>>>>>> When I was making it on CentOS I got the exactly same >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>> errors above. >>>>>> >>>>>> >>>>>> >>>>>>>>> Then I tried to install on Fedora 10 and it installed >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> smoothly. After >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> playing with Fedora for some time I realized that it is >>>>>>>>> >>>>>>>>> >>>> too slow >>>> >>>> >>>>>>>>> compared to CentOS or RH and I decided to move back to >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> CentOS and find >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> a way to properly install it. >>>>>>>>> >>>>>>>>> The clue to fix the problem was provided by Greg when he >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> said that the >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> FR included with CentOS was too old. When I installed the >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> first time I >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> didn't realized that there is a FR 1.13 version on CentOS >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> so I didn't >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> installed along with the OS. >>>>>>>>> >>>>>>>>> This time I selected 1.13 version and it was >>>>>>>>> >> installed normally. >> >>>>>>>>> Then I downloaded version FR 2.1 and it installed >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>> smoothly. Now I >>>>>> >>>>>> >>>>>> >>>>>>>>> have >>>>>>>>> >>>>>>>>> radiusd -v >>>>>>>>> radiusd: FreeRADIUS Version 2.1.1, for host >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> x86_64-unknown-linux-gnu, >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> built on Nov 28 2008 at 23:06:41 >>>>>>>>> >>>>>>>>> I read somewhere in the site that this is not the >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> recommended way to >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> do it and that 2.1 should be installed in a different >>>>>>>>> >> location. >> >>>>>>>>> If someone could comment about any problems that can arise >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> it will be >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> appreciated. >>>>>>>>> >>>>>>>>> Thanks >>>>>>>>> >>>>>>>>> Jair Santos >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> -----Original Message----- >>>>>>>>>> From: >>>>>>>>>> >>>>>>>>>> >> freeradius-users-bounces+jsantos5954=gmail.com(a)lists.freeradiu >> >>>>>>>>>> s.org >>>>>>>>>> >>>>>>>>>> >> [mailto:freeradius-users-bounces+jsantos5954=gmail.com@lists.f >> >>>>>>>>>> reeradius.org] On Behalf Of Greg Woods >>>>>>>>>> Sent: Thursday, November 20, 2008 1:01 PM >>>>>>>>>> To: FreeRadius users mailing list >>>>>>>>>> Subject: RE: Make error >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Thu, 2008-11-20 at 12:38 -0800, Olavo wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> Does anybody know about any Linux distro 64 bits that >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> Freeradius will >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> work for sure ? >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> I am using it on CentOS 5.2 x86_64. The freeradius >>>>>>>>>> >> package that >> >>>>>>>>>> comes with CentOS 5 is old though, I compiled >>>>>>>>>> >> freeradius from >> >>>>>>>>>> source. >>>>>>>>>> >>>>>>>>>> --Greg >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> - >>>>>>>>>> List info/subscribe/unsubscribe? See >>>>>>>>>> http://www.freeradius.org/list/users.html >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> - >>>>>>>>> List info/subscribe/unsubscribe? See >>>>>>>>> http://www.freeradius.org/list/users.html >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> -- >>>>>>>> This message has been scanned for viruses and >>>>>>>> dangerous content by MailScanner, and is >>>>>>>> believed to be clean. >>>>>>>> >>>>>>>> - >>>>>>>> List info/subscribe/unsubscribe? See >>>>>>>> http://www.freeradius.org/list/users.html >>>>>>>> -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

1 0

Re: Make error - Solved (not yet)
by Ted Lum 01 Dec '08

01 Dec '08

Do you have the coreutils package installed? Is "install" there? If not, it will not build the rpm structure correctly, see .spec file line 66. That won't affect the base server operation but it will keep the supplemental files from being added to the rpm... which means you have to set it all up manually and have lost some of the advantage of the package. Personally, I build on a dedicated build machine that has all the requirements and then simply deploy from a local repository to the target... whether it be test or production. That saves having to figure out the build environment every time and keeps compilers out off production boxes. -Ted- J Santos wrote: > I had no errors other than the missing directories that I had to manually > create. > > radiusd is uder /etc/logrotate.d > > -rw-r--r-- 1 root root 1106 Dec 1 09:15 radiusd > > and > > radius is under (not radiusd) > > /etc/pam.d > > -rw-r--r-- 1 root root 360 Dec 1 09:15 radius > > > It looks like the missing directories is a permission issue but I was > working as root. > > The server runs fine. Anything else I should check ? > > Thanks > > Jair Santos > > > > > > > > >> -----Original Message----- >> From: Ted Lum [mailto:freeradius.org@tedworld.com] >> Sent: Monday, December 01, 2008 9:46 AM >> To: J Santos >> Subject: Re: Make error - Solved >> >> >> It sounds like something went wrong in the rpmbuild. That >> script should >> have been included. The base script is included in >> "~/rpmbuild/BUILD/freeradius-server-2.1.1/redhat/rc.radiusd-redhat". >> That should have been installed @ "/etc/rc.d/init.d/radiusd". It not, >> check that you got "radiusd" under "/etc/logrotate.d" and >> "/etc/pam.d", >> those might be missing too. Again, you should not have to create that >> stuff manually. That's part of the advantage of a package and >> it should >> be there if the package built correctly. >> >> -Ted- >> >> J Santos wrote: >> >>> Hi all, >>> >>> I 've succesfully built the freeradius-server-2.1.1-0.x86_64.rpm. >>> >>> I only had to manually create the directories RPMS, >>> >> SOURCEs, SPECS >> >>> and x86_64 during the process. >>> >>> When installing I had to uninstall version 1.1.3 because of >>> >> conflicts >> >>> but once I did it the rpm worked smoothly. >>> >>> My only problem now is that I don't have the init script on >>> /etc/init.d. >>> >>> Does anybody know where I can get it from ? >>> >>> And, I am just wondering if we could make this rpm >>> >> available for other >> >>> people to use it. >>> >>> Thanks >>> >>> Jair Santos >>> >>> >>> >>> >>> >>> >>>> -----Original Message----- >>>> From: Ted Lum [mailto:freeradius.org@tedworld.com] >>>> Sent: Saturday, November 29, 2008 7:19 PM >>>> To: J Santos; 'FreeRadius users mailing list' >>>> Subject: Re: Make error - Solved >>>> >>>> >>>> Don't know. If you look in the .spec file you'll see what >>>> >> additional >> >>>> work is done in the package that isn't done otherwise. In >>>> >> addition to >> >>>> init.d you may need to deal with logrotate.d and pam.d, >>>> >> ldconfig and >> >>>> chkconfig, not to mention the users and groups it creates >>>> >> or the log >> >>>> files it customizes. You can do all this configuration by >>>> >> hand if you >> >>>> know what to do, but its a lot of extra work. This is why >>>> >> its a good >> >>>> idea to do an rpmbuild and install the package. It should >>>> deal with the >>>> existing version as well as enable a proper upgrade when a >>>> new version >>>> becomes available in the repository. Simply building from >>>> source may not >>>> be compatible with the previous version that's already there or >>>> compatible with any upgrade because the package has >>>> >> additional things >> >>>> and sometimes has them in different places. Just my opinion but I >>>> strongly discourage not using packages for applications >>>> already in the >>>> distros repository. >>>> >>>> J Santos wrote: >>>> >>>> >>>>> Thank you. >>>>> >>>>> Actually the server is running very well now. Investigating more I >>>>> realized that version 1.13 is still there but in different >>>>> directories, so when I set to start on boot it will run >>>>> >>>>> >>>> version 1.13. >>>> >>>> >>>>> Does anybody know if it is only a matter of changing the radiusd >>>>> script on /etc/init.d to point to version 2.1 daemon and >>>>> >>>>> >>>> conf files ? >>>> >>>> >>>>> Or there is anything elese that I have to do ? >>>>> >>>>> Jair Santos >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>> -----Original Message----- >>>>>> From: >>>>>> freeradius-users-bounces+jsantos5954=gmail.com(a)lists.freeradiu >>>>>> s.org >>>>>> [mailto:freeradius-users-bounces+jsantos5954=gmail.com@lists.f >>>>>> reeradius.org] On Behalf Of Ted Lum >>>>>> Sent: Saturday, November 29, 2008 12:04 PM >>>>>> To: FreeRadius users mailing list >>>>>> Subject: Re: Make error - Solved >>>>>> >>>>>> >>>>>> I assume that you are referring to a build from source >>>>>> >> as opposed >> >>>>>> to an rpmbuild from source? >>>>>> >>>>>> If that's the case you would want to review this: >>>>>> http://wiki.freeradius.org/Build#Building_RedHat_packages >>>>>> >>>>>> -Ted- >>>>>> >>>>>> Olavo wrote: >>>>>> >>>>>> >>>>>> >>>>>>> Hi all, >>>>>>> >>>>>>> I am posting this so it can save some headaches for other >>>>>>> >>>>>>> >>>>>>> >>>>>> people in >>>>>> >>>>>> >>>>>> >>>>>>> the future. >>>>>>> >>>>>>> I've been trying to install FR on a 64 bits OS for a >>>>>>> >>>>>>> >>>> while. First I >>>> >>>> >>>>>>> tried RH 5.2 and I got the following errors >>>>>>> >>>>>>> /usr/bin/libtool --mode=link gcc -o radmin >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> radmin.lo /usr/lib/libreadline.so /usr/lib64/libtermcap.so >>>>>>>>> /usr/src/redhat/BUILD/freeradius-2.1.1/src/lib/libfreeradius- >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> radius.la >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> util.lo log.lo conffile.lo -lnsl -lresolv -lpthread >>>>>>>>> >> -lreadline >> >>>>>>>>> -ltermcap gcc -o .libs/radmin .libs/radmin.o >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> /usr/lib/libreadline.so >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> /usr/lib64/libtermcap.so .libs/util.o .libs/log.o >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>> .libs/conffile.o >>>>>> >>>>>> >>>>>> >>>>>>>>> /usr/src/redhat/BUILD/freeradius-2.1.1/src/lib/.libs/libfreer >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>> adius-radi >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> us.s >>>>>>>>> o -lnsl -lresolv -lpthread -lreadline -ltermcap >>>>>>>>> /usr/lib/libreadline.so: could not read symbols: File in >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> wrong format >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> collect2: ld returned 1 exit status >>>>>>>>> gmake[4]: *** [radmin] Error 1 >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>> Then I move on to CentOs since Greg Woods informed that he >>>>>>> >>>>>>> >>>>>>> >>>>>> is using it >>>>>> >>>>>> >>>>>> >>>>>>> without any grief. >>>>>>> >>>>>>> When I was making it on CentOS I got the exactly same >>>>>>> >>>>>>> >>>> errors above. >>>> >>>> >>>>>>> Then I tried to install on Fedora 10 and it installed >>>>>>> >>>>>>> >>>>>>> >>>>>> smoothly. After >>>>>> >>>>>> >>>>>> >>>>>>> playing with Fedora for some time I realized that it is >>>>>>> >> too slow >> >>>>>>> compared to CentOS or RH and I decided to move back to >>>>>>> >>>>>>> >>>>>>> >>>>>> CentOS and find >>>>>> >>>>>> >>>>>> >>>>>>> a way to properly install it. >>>>>>> >>>>>>> The clue to fix the problem was provided by Greg when he >>>>>>> >>>>>>> >>>>>>> >>>>>> said that the >>>>>> >>>>>> >>>>>> >>>>>>> FR included with CentOS was too old. When I installed the >>>>>>> >>>>>>> >>>>>>> >>>>>> first time I >>>>>> >>>>>> >>>>>> >>>>>>> didn't realized that there is a FR 1.13 version on CentOS >>>>>>> >>>>>>> >>>>>>> >>>>>> so I didn't >>>>>> >>>>>> >>>>>> >>>>>>> installed along with the OS. >>>>>>> >>>>>>> This time I selected 1.13 version and it was installed normally. >>>>>>> >>>>>>> Then I downloaded version FR 2.1 and it installed >>>>>>> >>>>>>> >>>> smoothly. Now I >>>> >>>> >>>>>>> have >>>>>>> >>>>>>> radiusd -v >>>>>>> radiusd: FreeRADIUS Version 2.1.1, for host >>>>>>> >>>>>>> >>>>>>> >>>>>> x86_64-unknown-linux-gnu, >>>>>> >>>>>> >>>>>> >>>>>>> built on Nov 28 2008 at 23:06:41 >>>>>>> >>>>>>> I read somewhere in the site that this is not the >>>>>>> >>>>>>> >>>>>>> >>>>>> recommended way to >>>>>> >>>>>> >>>>>> >>>>>>> do it and that 2.1 should be installed in a different location. >>>>>>> >>>>>>> If someone could comment about any problems that can arise >>>>>>> >>>>>>> >>>>>>> >>>>>> it will be >>>>>> >>>>>> >>>>>> >>>>>>> appreciated. >>>>>>> >>>>>>> Thanks >>>>>>> >>>>>>> Jair Santos >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> -----Original Message----- >>>>>>>> From: >>>>>>>> freeradius-users-bounces+jsantos5954=gmail.com(a)lists.freeradiu >>>>>>>> s.org >>>>>>>> [mailto:freeradius-users-bounces+jsantos5954=gmail.com@lists.f >>>>>>>> reeradius.org] On Behalf Of Greg Woods >>>>>>>> Sent: Thursday, November 20, 2008 1:01 PM >>>>>>>> To: FreeRadius users mailing list >>>>>>>> Subject: RE: Make error >>>>>>>> >>>>>>>> >>>>>>>> On Thu, 2008-11-20 at 12:38 -0800, Olavo wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> Does anybody know about any Linux distro 64 bits that >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> Freeradius will >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> work for sure ? >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> I am using it on CentOS 5.2 x86_64. The freeradius package that >>>>>>>> comes with CentOS 5 is old though, I compiled freeradius from >>>>>>>> source. >>>>>>>> >>>>>>>> --Greg >>>>>>>> >>>>>>>> >>>>>>>> - >>>>>>>> List info/subscribe/unsubscribe? See >>>>>>>> http://www.freeradius.org/list/users.html >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> - >>>>>>> List info/subscribe/unsubscribe? See >>>>>>> http://www.freeradius.org/list/users.html >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> -- >>>>>> This message has been scanned for viruses and >>>>>> dangerous content by MailScanner, and is >>>>>> believed to be clean. >>>>>> >>>>>> - >>>>>> List info/subscribe/unsubscribe? See >>>>>> http://www.freeradius.org/list/users.html >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>> -- >>>> This message has been scanned for viruses and >>>> dangerous content by MailScanner, and is >>>> believed to be clean. >>>> >>>> >>>> >>> >>> >> -- >> This message has been scanned for viruses and >> dangerous content by MailScanner, and is >> believed to be clean. >> >> > > > -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

1 0

Re: Make error - Solved
by Ted Lum 01 Dec '08

01 Dec '08

It sounds like something went wrong in the rpmbuild. That script should have been included. The base script is included in "~/rpmbuild/BUILD/freeradius-server-2.1.1/redhat/rc.radiusd-redhat". That should have been installed @ "/etc/rc.d/init.d/radiusd". It not, check that you got "radiusd" under "/etc/logrotate.d" and "/etc/pam.d", those might be missing too. Again, you should not have to create that stuff manually. That's part of the advantage of a package and it should be there if the package built correctly. > > -Ted- > > J Santos wrote: >> Hi all, >> I 've succesfully built the freeradius-server-2.1.1-0.x86_64.rpm. >> >> I only had to manually create the directories RPMS, SOURCEs, SPECS >> and >> x86_64 during the process. >> >> When installing I had to uninstall version 1.1.3 because of conflicts >> but >> once I did it the rpm worked smoothly. >> >> My only problem now is that I don't have the init script on >> /etc/init.d. >> >> Does anybody know where I can get it from ? >> >> And, I am just wondering if we could make this rpm available for other >> people to use it. >> >> Thanks >> >> Jair Santos >> >> >> >> >> >>> -----Original Message----- >>> From: Ted Lum [mailto:freeradius.org@tedworld.com] Sent: Saturday, >>> November 29, 2008 7:19 PM >>> To: J Santos; 'FreeRadius users mailing list' >>> Subject: Re: Make error - Solved >>> >>> >>> Don't know. If you look in the .spec file you'll see what additional >>> work is done in the package that isn't done otherwise. In addition >>> to init.d you may need to deal with logrotate.d and pam.d, ldconfig >>> and chkconfig, not to mention the users and groups it creates or the >>> log files it customizes. You can do all this configuration by hand >>> if you know what to do, but its a lot of extra work. This is why its >>> a good idea to do an rpmbuild and install the package. It should >>> deal with the existing version as well as enable a proper upgrade >>> when a new version becomes available in the repository. Simply >>> building from source may not be compatible with the previous version >>> that's already there or compatible with any upgrade because the >>> package has additional things and sometimes has them in different >>> places. Just my opinion but I strongly discourage not using packages >>> for applications already in the distros repository. >>> >>> J Santos wrote: >>> >>>> Thank you. >>>> >>>> Actually the server is running very well now. Investigating more I >>>> realized that version 1.13 is still there but in different >>>> directories, so when I set to start on boot it will run >>> version 1.13. >>> >>>> Does anybody know if it is only a matter of changing the radiusd >>>> script on /etc/init.d to point to version 2.1 daemon and >>> conf files ? >>>> Or there is anything elese that I have to do ? >>>> >>>> Jair Santos >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>>> -----Original Message----- >>>>> From: >>>>> freeradius-users-bounces+jsantos5954=gmail.com(a)lists.freeradiu >>>>> s.org >>>>> [mailto:freeradius-users-bounces+jsantos5954=gmail.com@lists.f >>>>> reeradius.org] On Behalf Of Ted Lum >>>>> Sent: Saturday, November 29, 2008 12:04 PM >>>>> To: FreeRadius users mailing list >>>>> Subject: Re: Make error - Solved >>>>> >>>>> >>>>> I assume that you are referring to a build from source as >>>>> opposed to an rpmbuild from source? >>>>> >>>>> If that's the case you would want to review this: >>>>> http://wiki.freeradius.org/Build#Building_RedHat_packages >>>>> >>>>> -Ted- >>>>> >>>>> Olavo wrote: >>>>> >>>>>> Hi all, >>>>>> >>>>>> I am posting this so it can save some headaches for other >>>>>> >>>>> people in >>>>> >>>>>> the future. >>>>>> >>>>>> I've been trying to install FR on a 64 bits OS for a >>> while. First I >>> >>>>>> tried RH 5.2 and I got the following errors >>>>>> >>>>>> /usr/bin/libtool --mode=link gcc -o radmin >>>>>> >>>>>>>> radmin.lo /usr/lib/libreadline.so /usr/lib64/libtermcap.so >>>>>>>> /usr/src/redhat/BUILD/freeradius-2.1.1/src/lib/libfreeradius- >>>>>>>> >>>>>>> radius.la >>>>>>> >>>>>>>> util.lo log.lo conffile.lo -lnsl -lresolv -lpthread -lreadline >>>>>>>> -ltermcap gcc -o .libs/radmin .libs/radmin.o >>>>>>>> >>>>>>> /usr/lib/libreadline.so >>>>>>> >>>>>>>> /usr/lib64/libtermcap.so .libs/util.o .libs/log.o >>>>>>>> >>>>> .libs/conffile.o >>>>> >>>>>>>> /usr/src/redhat/BUILD/freeradius-2.1.1/src/lib/.libs/libfreer >>>>>>>> >>>>>> adius-radi >>>>>> >>>>>>>> us.s >>>>>>>> o -lnsl -lresolv -lpthread -lreadline -ltermcap >>>>>>>> /usr/lib/libreadline.so: could not read symbols: File in >>>>>>>> >>>>>>> wrong format >>>>>>> >>>>>>>> collect2: ld returned 1 exit status >>>>>>>> gmake[4]: *** [radmin] Error 1 >>>>>>>> >>>>>> Then I move on to CentOs since Greg Woods informed that he >>>>>> >>>>> is using it >>>>> >>>>>> without any grief. >>>>>> >>>>>> When I was making it on CentOS I got the exactly same >>> errors above. >>> >>>>>> Then I tried to install on Fedora 10 and it installed >>>>>> >>>>> smoothly. After >>>>> >>>>>> playing with Fedora for some time I realized that it is too slow >>>>>> compared to CentOS or RH and I decided to move back to >>>>>> >>>>> CentOS and find >>>>> >>>>>> a way to properly install it. >>>>>> >>>>>> The clue to fix the problem was provided by Greg when he >>>>>> >>>>> said that the >>>>> >>>>>> FR included with CentOS was too old. When I installed the >>>>>> >>>>> first time I >>>>> >>>>>> didn't realized that there is a FR 1.13 version on CentOS >>>>>> >>>>> so I didn't >>>>> >>>>>> installed along with the OS. >>>>>> >>>>>> This time I selected 1.13 version and it was installed normally. >>>>>> >>>>>> Then I downloaded version FR 2.1 and it installed >>> smoothly. Now I >>> >>>>>> have >>>>>> >>>>>> radiusd -v >>>>>> radiusd: FreeRADIUS Version 2.1.1, for host >>>>>> >>>>> x86_64-unknown-linux-gnu, >>>>> >>>>>> built on Nov 28 2008 at 23:06:41 >>>>>> >>>>>> I read somewhere in the site that this is not the >>>>>> >>>>> recommended way to >>>>> >>>>>> do it and that 2.1 should be installed in a different location. >>>>>> >>>>>> If someone could comment about any problems that can arise >>>>>> >>>>> it will be >>>>> >>>>>> appreciated. >>>>>> >>>>>> Thanks >>>>>> >>>>>> Jair Santos >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> -----Original Message----- >>>>>>> From: >>>>>>> freeradius-users-bounces+jsantos5954=gmail.com(a)lists.freeradiu >>>>>>> s.org >>>>>>> [mailto:freeradius-users-bounces+jsantos5954=gmail.com@lists.f >>>>>>> reeradius.org] On Behalf Of Greg Woods >>>>>>> Sent: Thursday, November 20, 2008 1:01 PM >>>>>>> To: FreeRadius users mailing list >>>>>>> Subject: RE: Make error >>>>>>> >>>>>>> >>>>>>> On Thu, 2008-11-20 at 12:38 -0800, Olavo wrote: >>>>>>> >>>>>>>> Does anybody know about any Linux distro 64 bits that >>>>>>>> >>>>>>> Freeradius will >>>>>>> >>>>>>>> work for sure ? >>>>>>>> >>>>>>> I am using it on CentOS 5.2 x86_64. The freeradius package that >>>>>>> comes with CentOS 5 is old though, I compiled freeradius from >>>>>>> source. >>>>>>> >>>>>>> --Greg >>>>>>> >>>>>>> >>>>>>> - >>>>>>> List info/subscribe/unsubscribe? See >>>>>>> http://www.freeradius.org/list/users.html >>>>>>> >>>>>> - >>>>>> List info/subscribe/unsubscribe? See >>>>>> http://www.freeradius.org/list/users.html -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

1 0

Daloradius Help
by Bashir Jahed 01 Dec '08

01 Dec '08

I have managed to get freeradius + mysql authentication working and have installed daloradius 0.9-7, when I attempt to log on I get the following error message, Google proved fruitless on this occasion: Database connection error Error Message: DB Error: connect failed Debug: [nativecode=Can't connect to MySQL server on '127.0.0.1' (13)] ** mysql://root:@127.0.0.1/radius Help Me please...

3 2

sim-use check via perl
by Oguzhan Kayhan 01 Dec '08

01 Dec '08

Hello, I am using a perl script to check the user-password couple. And also managed to add radreply. But i cant figure out where to add simultaneous-check. I mean it is checking sim. use but by default always only 1 usage. Even i add it to users data in mysql, it does not effect. By the way, do i need to check sim-use in this perl script or is there a way to check it via freeradius itself by mysql ? Here is the perl script i am using.. PS: I am not much familiar about perl. Any correction or advices are welcome also. #!/usr/bin/perl $cfg_database = "wireless"; $cfg_data_source = "DBI:mysql:$cfg_database:databaseserver.adress"; $cfg_username = "xxx"; $cfg_password = "xxx"; use URI; use CGI; use CGI::Carp qw( fatalsToBrowser ); use DBI; use LWP::UserAgent; use XML::Simple; use HTTP::Headers; #Oguz-End #use strict; # This is very important ! Without this script will not get the filled hashesh from main. use vars qw(%RAD_REQUEST %RAD_REPLY %RAD_CHECK); use Data::Dumper; # Function to handle authorize sub authorize { ####### Staff&Student Decision $length_uid = length($RAD_REQUEST{'User-Name'}); if ($length_uid < 6) { $request = 'staff-info'; $usertype= 'P'; } else { $request = 'student-info'; $usertype = 'O'; } ####### Login Check via BAIS my $url = URI->new('http://urlforcontrolofclient/xxx.php'); $url->query_form( # And here the form data pairs: 'request' => $request, 'id' => $RAD_REQUEST{'User-Name'}, 'pwd' => $RAD_REQUEST{'User-Password'}, ); my $response = LWP::UserAgent->new->get( $url ); $dump = Dumper($response); @res_satirlari = split('\n', $dump); foreach $satir (@res_satirlari) { if ( $satir=~ /<(.*)>(.*)<\/.*/ ) { $variable = $1; $value=$2; $cmd='$'.$variable."=\"$value\""; $cmd=~s/@/\\@/g; eval($cmd); } } $namesurname = $firstname . " " . $lastname; ######## Check BAIS for Timeouts if ($dump =~ /Timeout/){ $RAD_REPLY{'Reply-Message'} = "Timeout- Try Again"; return RLM_MODULE_REJECT; } ######## Get Password from Database $dbh = DBI->connect( $cfg_data_source, $cfg_username, $cfg_password) or die ("Can not connect to $cfg_data_source \n"); $sql5 = "select Value from radcheck where UserName = \'$RAD_REQUEST{'User-Name'}\' and Attribute = 'Password';"; $sth = $dbh -> prepare($sql5); $sth -> execute() or die("olmadi"); ($pass) = $sth-> fetchrow_array(); if ($dump =~ />false</i) { ####### Check Account On MySQL if ($pass eq $RAD_REQUEST{'User-Password'}) { # User Accepted via SQL return RLM_MODULE_OK; } else { # Reject user and tell him why $RAD_REPLY{'Reply-Message'} = "Unknown Username Or Password"; return RLM_MODULE_REJECT; } } else { ####### User Accepted ####### Database check $dbh = DBI->connect( $cfg_data_source, $cfg_username, $cfg_password) or die ("2Can not connect to $cfg_data_source \n"); $sql = "select UserName from radcheck where UserName = \'$RAD_REQUEST{'User-Name'}\';"; $sth = $dbh -> prepare($sql); $sth -> execute() or die("olmadi"); ($adi) = $sth-> fetchrow_array(); if (!$adi) { $sql2 = "INSERT INTO radcheck (UserName,Attribute,op,Value) VALUES (\'$RAD_REQUEST{'User-Name'}\','NameSurname',':=',\"$namesurname\");"; $sth2 = $dbh -> prepare($sql2); $sth2 -> execute() or die("olmadi"); $sql3 = "INSERT INTO radcheck (UserName,Attribute,op,Value) values(\'$RAD_REQUEST{'User-Name'}\','email',':=',\'$email\')"; $sth = $dbh -> prepare($sql3); $sth -> execute() or die("olmadi"); $sql4 = "INSERT INTO radcheck (UserName,Attribute,op,Value) values (\'$RAD_REQUEST{'User-Name'}\','UserType',':=',\'$usertype\');"; $sth = $dbh -> prepare($sql4); $sth -> execute() or die("olmadi"); $sql5 = "INSERT INTO usergroup (UserName,GroupName) values (\'$RAD_REQUEST{'User-Name'}\',\'$usertype\');"; $sth = $dbh -> prepare($sql5); $sth -> execute() or die("olmadi"); $sql16 = "INSERT INTO radcheck (UserName,Attribute,op,Value) values(\'$RAD_REQUEST{'User-Name'}\','Auth-Type','==',\'Local\')"; $sth = $dbh -> prepare($sql16); $sth -> execute() or die("olmadi"); } #### $dbh -> disconnect(); return RLM_MODULE_OK; } } # Function to handle authenticate sub authenticate { $dbh = DBI->connect( $cfg_data_source, $cfg_username, $cfg_password) or die ("Can not connect to $cfg_data_source \n"); $sql6 = "select Value from radcheck where UserName = \'$RAD_REQUEST{'User-Name'}\' and Attribute = 'Auth-Type';"; $sth = $dbh -> prepare($sql6); $sth -> execute() or die("olmadi"); ($type) = $sth-> fetchrow_array(); if ($type eq "Reject") { $sql7 = "select Value from radreply where UserName = \'$RAD_REQUEST{'User-Name'}\' and Attribute = 'Reply-Message';"; $sth = $dbh -> prepare($sql7); $sth -> execute() or die("olmadi"); ($reply) = $sth-> fetchrow_array(); ###dbg("REPLY ".$reply); $dbh -> disconnect(); $RAD_REPLY{'Reply-Message'} = $reply; return RLM_MODULE_REJECT; if ($RAD_REQUEST{'User-Name'} eq "") { ###dbg("REPLY ".$reply); $RAD_REPLY{'Reply-Message'} = "Enter username"; return RLM_MODULE_REJECT; } } else { # Accept user and set some attribute ### Sending radcheck requests### $sql8= "select Value from radcheck where UserName = \'$RAD_REQUEST{'User-Name'}\' and Attribute = 'Simultaneous-Use';"; $sth = $dbh -> prepare($sql8); $sth -> execute() or die("olmadi"); ($sim) = $sth-> fetchrow_array(); if (!$sim) { $RAD_CHECK{'Simultaneous-Use'} = "1"; } else { $RAD_CHECK{'Simultaneous-Use'} = $sim; } $sql9= "select Value from radreply where UserName = \'$RAD_REQUEST{'User-Name'}\' and Attribute = 'WISPr-Bandwidth-Max-Down';"; $sth = $dbh -> prepare($sql9); $sth -> execute() or die("olmadi"); ($bwdown) = $sth-> fetchrow_array(); if (!$bwdown) { $RAD_REPLY{'WISPr-Bandwidth-Max-Down'} = "1000000"; } $sql10= "select Value from radreply where UserName = \'$RAD_REQUEST{'User-Name'}\' and Attribute = 'WISPr-Bandwidth-Max-Up';"; $sth = $dbh -> prepare($sql10); $sth -> execute() or die("olmadi"); ($bwup) = $sth-> fetchrow_array(); if (!$bwup) { $RAD_REPLY{'WISPr-Bandwidth-Max-Up'} = "512000"; } $RAD_REPLY{'Acct-Interim-Interval'} = "60"; $sql11= "select * from radreply where UserName = \'$RAD_REQUEST{'User-Name'}\' ;"; $sth = $dbh -> prepare($sql11); $sth -> execute() or die("olmadi"); while(@results = $sth-> fetchrow_array()) { $RAD_REPLY{$results[2]} = $results[4]; } return RLM_MODULE_OK; $dbh -> disconnect(); } } sub dbg { my $msg = shift; open(DBG, ">>/tmp/dbg"); print DBG "$msg\n"; close DBG; return 1; } # Function to handle accounting sub accounting { # For debugging purposes only # &log_request_attributes; # You can call another subroutine from here return RLM_MODULE_OK; }

2 1

pls help: restrict authentication for certain realms from particular clients
by ST Wong (ITSC) 01 Dec '08

01 Dec '08

Hi all, We just upgraded our freeradius server from 1.7 to 2.1.1. I'd like to restrict authentication requests as following: client A accepts: @realm1, @realm2 client B accepts: @realm2, @realm3 so that requests like follwoing will be rejected: @realm3 to client A @realm1 to client B Would anyone please help? Sorry for newbie question. Thank you very much. /ST Wong

3 3

Problem with SMC Access Point in Client Mode using EAP-TLS and Freeradius-2.1.1
by Harald Schreiber 30 Nov '08

30 Nov '08

Hello, I'm running a Freeradius-Server 2.1.1 on my SuSE Linux 11.0 Box to control the access to my WLAN using EAP-TLS. This works fine with my notebook. But now I have bought a SMC EZ Connect N Pro Access Point which I have configured as a WLAN client using EAP-TLS too. When this WLAN client tries to authenticate itself at the Freeradius Server the authentication fails and I get the message rlm_eap: No EAP session matching the State variable. [eap] Either EAP-request timed out OR EAP-response to an unknown EAP-request in the Freeradius log file. Can someone please tell me what's going wrong there? Any help is appreciated. Here is the output of radiusd -X when an authentication request of the SMC access point comes in: rad_recv: Access-Request packet from host 192.168.254.1 port 1024, id=1, length=125 User-Name = "harald" NAS-IP-Address = 192.168.254.1 Called-Station-Id = "0014bf3bcd8a" Calling-Station-Id = "0013f7ca60de" NAS-Identifier = "0014bf3bcd8a" NAS-Port = 52 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0200000b01686172616c64 Message-Authenticator = 0x543152e558b443afb9430d9fd02aa75f +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "harald", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 0 length 11 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry harald at line 2 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Requiring client certificate [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 1 to 192.168.254.1 port 1024 EAP-Message = 0x010100060d20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x7139c4e57138c9bf5d9926d441f8680e Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.254.1 port 1024, id=1, length=200 Cleaning up request 6 ID 1 with timestamp +1123 User-Name = "harald" NAS-IP-Address = 192.168.254.1 Called-Station-Id = "0014bf3bcd8a" Calling-Station-Id = "0013f7ca60de" NAS-Identifier = "0014bf3bcd8a" NAS-Port = 52 Framed-MTU = 1400 State = 0x7139c4e57138c9bf5d9926d441f8680e NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020100440d800000003a160301003501000031030163c2a49b798675d7c211a92ace77bde2102205aefca9044d7fc1ab18323a627d00000a0035002f000a000400050100 Message-Authenticator = 0x2f0e13f531634f6696098de4ecf6dfca +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "harald", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 68 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry harald at line 2 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS TLS Length 58 [tls] Length Included [tls] eaptls_verify returned 11 [tls] (other): before/accept initialization [tls] TLS_accept: before/accept initialization [tls] <<< TLS 1.0 Handshake [length 0035], ClientHello [tls] TLS_accept: SSLv3 read client hello A [tls] >>> TLS 1.0 Handshake [length 002a], ServerHello [tls] TLS_accept: SSLv3 write server hello A [tls] >>> TLS 1.0 Handshake [length 05fb], Certificate [tls] TLS_accept: SSLv3 write certificate A [tls] >>> TLS 1.0 Handshake [length 0091], CertificateRequest [tls] TLS_accept: SSLv3 write certificate request A [tls] TLS_accept: SSLv3 flush data [tls] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [tls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 1 to 192.168.254.1 port 1024 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x6c6420536368726569626572 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x7139c4e5703bc9bf5d9926d441f8680e Finished request 7. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.254.1 port 1024, id=1, length=138 Cleaning up request 7 ID 1 with timestamp +1123 User-Name = "harald" NAS-IP-Address = 192.168.254.1 Called-Station-Id = "0014bf3bcd8a" Calling-Station-Id = "0013f7ca60de" NAS-Identifier = "0014bf3bcd8a" NAS-Port = 52 Framed-MTU = 1400 State = 0x7139c4e5703bc9bf5d9926d441f8680e NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020200060d00 Message-Authenticator = 0x45eb23701fb6bcbe430512689ce99aa1 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "harald", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry harald at line 2 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS [tls] Received TLS ACK [tls] ACK handshake fragment handler [tls] eaptls_verify returned 1 [tls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 1 to 192.168.254.1 port 1024 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xd786ca2d48078d6c34c45666ae966c4b8d52806adc07f6a25cf7e72f6a953f1e40046d8934b0b2a074f158d9c85f0025c21fac551f8659ec8d254744d5927662dec81eb10d102f0c0a16030100910d0000890301024000830081307f310b3009060355040613024445310c300a060355040813034e5257310f300d0603550407130641616368656e311b3019060355040a1312486172616c64734379626572467265616b733119301706035504031310486172616c64205363687265696265723119301706092a864886f70d010901160a684072616c642e6e65740e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x7139c4e5733ac9bf5d9926d441f8680e Finished request 8. Going to the next request Waking up in 4.9 seconds. Cleaning up request 8 ID 1 with timestamp +1123 Ready to process requests. rad_recv: Access-Request packet from host 192.168.254.1 port 1024, id=1, length=200 User-Name = "harald" NAS-IP-Address = 192.168.254.1 Called-Station-Id = "0014bf3bcd8a" Calling-Station-Id = "0013f7ca60de" NAS-Identifier = "0014bf3bcd8a" NAS-Port = 52 Framed-MTU = 1400 State = 0x7139c4e5733ac9bf5d9926d441f8680e NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020200440d800000003a160301003501000031030163c2a49b798675d7c211a92ace77bde2102205aefca9044d7fc1ab18323a627d00000a0035002f000a000400050100 Message-Authenticator = 0x25fd4ab36c6ba9a789644e5a77225539 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "harald", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 68 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry harald at line 2 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} rlm_eap: No EAP session matching the State variable. [eap] Either EAP-request timed out OR EAP-response to an unknown EAP-request [eap] Failed in handler ++[eap] returns invalid Failed to authenticate the user. Login incorrect: [harald/<via Auth-Type = EAP>] (from client blizzard port 52 cli 0013f7ca60de) Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> harald attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 9 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 9 Sending Access-Reject of id 1 to 192.168.254.1 port 1024 Waking up in 4.9 seconds. Cleaning up request 9 ID 1 with timestamp +1131 Ready to process requests.

2 1

Xlat from config-items
by Venkatesh K 29 Nov '08

29 Nov '08

Hello, I would like to send a reply based on an attribute(s) in request config-items. It seems, from unlang man page, this is not supported. Any thoughts or ideas? Thanks, Venkatesh. K

2 2