- Freeradius-Users - lists.freeradius.org

radacct/radutmp out of sync
by Tuc at T-B-O-H.NET 22 Jun '08

22 Jun '08

Hi, What are some possible causes in 2.0.4 for the radacct (MySQL) and radutmp (That feeds radwho) to get out of sync. It seems almost 100% of the time, radwho/radutmp isn't showing the user, while radacct has no acctstoptime. Thanks, Tuc

3 6

Code fix for next release
by Tuc at T-B-O-H.NET 22 Jun '08

22 Jun '08

Hi, Can Bug 517 (Patch for radwho to correct time output and IP address outpu) be included in the next release? I've used the supplied patch and find it works quite well. Would be nice not to have to repatch on the next release. Thanks, Tuc

2 2

Kicking off billing scipt in accounting block
by Pete Kay 22 Jun '08

22 Jun '08

Hi, I tried to execute a billing script as follows: accounting{ sql exec /etc/billing/bill } But, I am getting: /usr/local/etc/raddb/sites-enabled/default[350]: Expecting section start brace '{' after "exec /home/billing/bill" Errors reading /usr/local/etc/raddb/radiusd.conf What is wrong with my syntax? Is there any sample that I can refer to? I checked the unlan, but I could not find anything that mentions the variable that I can use to pass to the script. What I like to do is to call the script: exec /etc/billing/bill <radacctid> That way, I can know which line to process. Thanks for any suggestion. Regards, Pete

7 22

FreeRadius and CoovaAP
by LGM 21 Jun '08

21 Jun '08

Hello list, Has anybody implemented CoovaAP with FreeRadius talking to LDAP (Win 2003 Active Directory)? I've been attempting to configure CoovaAP to authenticate against Active Directory using FreeRadius binded to LDAP. The LDAP binding goes fine. I can also successfully authenticate a user with a radtest command from the local machine. I run into problems when I enter a username and password into the authentication page on my WRT54GL running CoovaAP. The password is passed to FreeRadius as CHAP. LDAP fails with the error "User-Password" is required for authentication. Cannot use "CHAP-Password" Is it possible for CoovaAP to pass usernames and passwords in a form that LDAP can authenticate? I've been considering editing the ChilliLibrary.js on the WRT54GL but that seems like a heavy handed (and likely ineffective) way of going about it. Any help/suggestions would be greatly appreciated. Thank you in advance. /Luc

3 2

Re: FreeRadius and CoovaAP (Ivan Kalik)
by LGM 21 Jun '08

21 Jun '08

Yes, That's exactly my point. CHAP will not work. We've been using the internal Chillispot captive portal on a WRT54GL running the CoovaAP firmware. Is there any way of using that internal captive portal but having it send PAP passwords instead of CHAP? It would be much easier for my configuration if that internal portal was being used rather than an external page. Thank you for the prompt response to my initial question. /Luc On Sat, Jun 21, 2008 at 12:39 PM, <freeradius-users-request(a)lists.freeradius.org> wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Re: FreeRadius and CoovaAP (Ivan Kalik) > 2. Re: dhcp server (DHCPFlags feature) (Andrew Hood) > 3. Re: freeradius assign duplicate ip address Error (Ivan Kalik) > 4. Re: dhcp server (DHCPFlags feature) (A.L.M.Buxey(a)lboro.ac.uk) > 5. Re: No Aoth Type problem again (Ivan Kalik) > 6. Re: Freeradius-Users Digest, Vol 38, Issue 116 (Andy An) > 7. When to use proxy Radius (Yago F. Hansen) > 8. Re: Kicking off billing scipt in accounting block (Pete Kay) > 9. Re: Kicking off billing scipt in accounting block (Alan DeKok) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 21 Jun 2008 16:33:37 +0100 > From: "Ivan Kalik" <tnt(a)kalik.net> > Subject: Re: FreeRadius and CoovaAP > To: "FreeRadius users mailing list" > <freeradius-users(a)lists.freeradius.org> > Message-ID: <UzBzZ63g.1214062417.4201120.tnt(a)kalik.co.yu> > Content-Type: text/plain; charset=ISO-8859-2 > > You can't authenticate chap against ldap (AD). Use pap or mschap > (ntlm_auth). > > Ivan Kalik > Kalik Informatika ISP > > > Dana 21/6/2008, "LGM" <lmazzella(a)gmail.com> pi?e: > >>Hello list, >> >>Has anybody implemented CoovaAP with FreeRadius talking to LDAP (Win >>2003 Active Directory)? >> >>I've been attempting to configure CoovaAP to authenticate against >>Active Directory using FreeRadius binded to LDAP. The LDAP binding >>goes fine. I can also successfully authenticate a user with a radtest >>command from the local machine. >>I run into problems when I enter a username and password into the >>authentication page on my WRT54GL running CoovaAP. The password is >>passed to FreeRadius as CHAP. LDAP fails with the error >>"User-Password" is required for authentication. Cannot use >>"CHAP-Password" >>Is it possible for CoovaAP to pass usernames and passwords in a form >>that LDAP can authenticate? I've been considering editing the >>ChilliLibrary.js on the WRT54GL but that seems like a heavy handed >>(and likely ineffective) way of going about it. Any help/suggestions >>would be greatly appreciated. >>Thank you in advance. >> >> >>/Luc >>- >>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html >> >> > > > > ------------------------------ > > Message: 2 > Date: Sun, 22 Jun 2008 02:01:22 +1000 > From: Andrew Hood <freeradius(a)andyhood.net> > Subject: Re: dhcp server (DHCPFlags feature) > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: <485D25D2.40007(a)andyhood.net> > Content-Type: text/plain; charset=us-ascii > > Alan DeKok wrote: >> Haralds Ulmanis wrote: >> >>>Just checked out from cvs .. and got compile error: >>>... >>>/root/freeradius/radiusd/src/main/listen.c:309: undefined reference to >>>`request_stats_reply' >> >> >> Edit src/main/Makefile, and add "stats.c" to the SERVER_SRCS line. >> >> It's in Makefile.in, but you probably didn't re-run "configure", and >> likely don't want to do that, either. > > That sounds odd, assuming normal auto* practice. The top Makefile should > contain a rule: > > Makefile: Makefile.in > > which would run "./config.status --recheck" > > What platform and version of make was this? > > -- > REALITY.SYS not found: Universe halted. > > > ------------------------------ > > Message: 3 > Date: Sat, 21 Jun 2008 17:10:48 +0100 > From: "Ivan Kalik" <tnt(a)kalik.net> > Subject: Re: freeradius assign duplicate ip address Error > To: freeradius-users(a)lists.freeradius.org > Message-ID: <SEhNjjZn.1214064648.4062820.tnt(a)kalik.co.yu> > Content-Type: text/plain; charset=ISO-8859-2 > > Can you produce a debug demonstrating this? > > Ivan Kalik > Kalik Informatika ISP > > > Dana 21/6/2008, "Deep Purple" <jinjusi(a)yahoo.co.kr> pi?e: > >>freeradius assign duplicate ip address , >>??i using ippool module and file, >>for example user1 get the??172.16.1.30 >>and some times (not always ) user2 get the same??172.16.1.30 >>freeradius-1.1.7.tar.gz >>freeradius-client-1.1.5.tar.bz2 >>pptpd-1.3.3-1.fc5.i386.rpm >>Please Help me >> >> >> ________________________________________________________ >>180??? ????????? ??????! ?????? - ?????? ?????? ???????????? ????????? ??????? ????????? ??????! ????????? ????????? ??????????????????. >>http://kr.content.mail.yahoo.com/cgland >> >>- >>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > > > ------------------------------ > > Message: 4 > Date: Sat, 21 Jun 2008 17:15:09 +0100 > From: A.L.M.Buxey(a)lboro.ac.uk > Subject: Re: dhcp server (DHCPFlags feature) > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: <20080621161509.GA23492(a)lboro.ac.uk> > Content-Type: text/plain; charset=us-ascii > > Hi, > >> That sounds odd, assuming normal auto* practice. The top Makefile should >> contain a rule: >> >> Makefile: Makefile.in >> >> which would run "./config.status --recheck" > > aye - only the libltdl has such practice. that might > explain things and the gotcha > > alan > > > ------------------------------ > > Message: 5 > Date: Sat, 21 Jun 2008 17:18:28 +0100 > From: "Ivan Kalik" <tnt(a)kalik.net> > Subject: Re: No Aoth Type problem again > To: "FreeRadius users mailing list" > <freeradius-users(a)lists.freeradius.org> > Message-ID: <uzgQMku0.1214065108.6112610.tnt(a)kalik.co.yu> > Content-Type: text/plain; charset=ISO-8859-2 > >>So, for the sake of 'clean' configs I reinstalled freeRadius 2.0.5 (which I >>was running before btw..) and changed nothing except "default_eap_type = >>peap". To my amazement it ran perfectly! Then I turned MySQL auth on and it >>worked! >>After all these hours figuring out freeRadius and following HowToos, it now >>runs out of the box! Where there so many changes from 2.0.3 to 2.0.5? >> > Not really. Only significant thing that changed there was that > inner-tunnel config file was copied to the place it was suposed to be > (you had to do-it-yourself in previous version - oversight). > > Ivan Kalik > Kalik Informatika ISP > > > > ------------------------------ > > Message: 6 > Date: Sat, 21 Jun 2008 09:24:13 -0700 > From: Andy An <andyan(a)eciad.ca> > Subject: Re: Freeradius-Users Digest, Vol 38, Issue 116 > To: freeradius-users(a)lists.freeradius.org > Message-ID: <485D2B2D.3080509(a)eciad.ca> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hi Jelle: > Thanks for your good news. > I will try to reinstall the freeradius 2.0.5 again next Monday (hope to > have the same luck). > Really really a great appreciate for both Alan and Ivan for your helps. > Andy > > > > freeradius-users-request(a)lists.freeradius.org wrote: >> Send Freeradius-Users mailing list submissions to >> freeradius-users(a)lists.freeradius.org >> >> To subscribe or unsubscribe via the World Wide Web, visit >> http://lists.freeradius.org/mailman/listinfo/freeradius-users >> or, via email, send a message with subject or body 'help' to >> freeradius-users-request(a)lists.freeradius.org >> >> You can reach the person managing the list at >> freeradius-users-owner(a)lists.freeradius.org >> >> When replying, please edit your Subject line so it is more specific >> than "Re: Contents of Freeradius-Users digest..." >> >> >> Today's Topics: >> >> 1. Re: No Aoth Type problem again (Jelle Langbroek) >> 2. Problem in connecting to switch on telnet (Guk Viktor) >> 3. Re: Kicking off billing scipt in accounting block (Pete Kay) >> 4. radacct/radutmp out of sync (Tuc at T-B-O-H.NET) >> 5. FreeRadius and CoovaAP (LGM) >> 6. Re: radacct/radutmp out of sync (Alan DeKok) >> 7. Re: Kicking off billing scipt in accounting block (Alan DeKok) >> >> >> ---------------------------------------------------------------------- >> >> Message: 1 >> Date: Sat, 21 Jun 2008 12:23:15 +0200 >> From: "Jelle Langbroek" <jml(a)orkz.net> >> Subject: Re: No Aoth Type problem again >> To: "FreeRadius users mailing list" >> <freeradius-users(a)lists.freeradius.org> >> Message-ID: >> <7796c3f70806210323w22d3617s7a8995523637cef1(a)mail.gmail.com> >> Content-Type: text/plain; charset="iso-8859-1" >> >> So, for the sake of 'clean' configs I reinstalled freeRadius 2.0.5 (which I >> was running before btw..) and changed nothing except "default_eap_type = >> peap". To my amazement it ran perfectly! Then I turned MySQL auth on and it >> worked! >> After all these hours figuring out freeRadius and following HowToos, it now >> runs out of the box! Where there so many changes from 2.0.3 to 2.0.5? >> >> Anyway, thanks for all the help Alan and Ivan! >> >> Jelle >> >> 2008/6/20 Alan DeKok <aland(a)deployingradius.com>: >> >> > > > ------------------------------ > > Message: 7 > Date: Sat, 21 Jun 2008 17:21:47 +0100 > From: "Yago F. Hansen" <sti(a)soportec.com> > Subject: When to use proxy Radius > To: "FreeRadius users mailing list" > <freeradius-users(a)lists.freeradius.org> > Message-ID: <000801c8d3ba$e84409d0$c901a8c0@BAREBONE> > Content-Type: text/plain; format=flowed; charset="iso-8859-1"; > reply-type=original > > Hi everybody: > > I am going to planify a new infrastructure with FreeRadius. I would like to > ask to you, whats the rule to planify the use of proxy servers for the size > in users or the size in use or the redundancy? > > Thank you from now > > > > ------------------------------ > > Message: 8 > Date: Sun, 22 Jun 2008 00:21:50 +0800 > From: "Pete Kay" <petedao(a)gmail.com> > Subject: Re: Kicking off billing scipt in accounting block > To: "FreeRadius users mailing list" > <freeradius-users(a)lists.freeradius.org> > Message-ID: > <7aa8bd9d0806210921kbeeb05aq60790713e8a6a805(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Hi Alan, > > I have tried the following: > accounting{ > > sql > > exec /etc/billing/bill > } > > > But it still does not work. I checked the unlang, but it does not give me > much hint.... > Could you give some suggestions how I can get the billing script to run? > > Thanks, > Pete >

4 3

Re: Freeradius-Users Digest, Vol 38, Issue 116
by Andy An 21 Jun '08

21 Jun '08

Hi Jelle: Thanks for your good news. I will try to reinstall the freeradius 2.0.5 again next Monday (hope to have the same luck). Really really a great appreciate for both Alan and Ivan for your helps. Andy freeradius-users-request(a)lists.freeradius.org wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Re: No Aoth Type problem again (Jelle Langbroek) > 2. Problem in connecting to switch on telnet (Guk Viktor) > 3. Re: Kicking off billing scipt in accounting block (Pete Kay) > 4. radacct/radutmp out of sync (Tuc at T-B-O-H.NET) > 5. FreeRadius and CoovaAP (LGM) > 6. Re: radacct/radutmp out of sync (Alan DeKok) > 7. Re: Kicking off billing scipt in accounting block (Alan DeKok) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 21 Jun 2008 12:23:15 +0200 > From: "Jelle Langbroek" <jml(a)orkz.net> > Subject: Re: No Aoth Type problem again > To: "FreeRadius users mailing list" > <freeradius-users(a)lists.freeradius.org> > Message-ID: > <7796c3f70806210323w22d3617s7a8995523637cef1(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > So, for the sake of 'clean' configs I reinstalled freeRadius 2.0.5 (which I > was running before btw..) and changed nothing except "default_eap_type = > peap". To my amazement it ran perfectly! Then I turned MySQL auth on and it > worked! > After all these hours figuring out freeRadius and following HowToos, it now > runs out of the box! Where there so many changes from 2.0.3 to 2.0.5? > > Anyway, thanks for all the help Alan and Ivan! > > Jelle > > 2008/6/20 Alan DeKok <aland(a)deployingradius.com>: > >

1 0

dhcp server (DHCPFlags feature)
by EvilEzh 21 Jun '08

21 Jun '08

It's not bug ... but some feature. After some testing, i figured out, that some dhcp clients (udhcp) in discover message havn't set broadcast flag, so replay is also unicast. And thease clients can't get ip address. Is it possilbe to allow update DHCP-Flags in replay, i've tried in update section: DHCPFlags = Broadcast But looks like without success. Haralds

6 17

No Aoth Type problem again
by Andy An 21 Jun '08

21 Jun '08

Hi Ivan: The password is in the ldap server as one of attributes binded to the user (userPassword: {CRYPT}something). I posted the debugging info here and thanks a lot for your help! Andy ------------The radiusd -X debugging info for a failed authentication request : rad_recv: Access-Request packet from host 10.10.10.228 port 1059, id=90, length=156 User-Name = "andyan" NAS-IP-Address = 10.10.10.228 NAS-Port = 1 Called-Station-Id = "00-14-6C-CC-93-E8:ECIeduroam" Calling-Station-Id = "00-17-F2-52-8A-C7" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0200000b01616e6479616e Message-Authenticator = 0x1b640e34d5907297f26e0150e954b295 +- entering group authorize expand: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /usr/local/var/log/radius/radacct/10.10.10.228/auth-detail-20080619 rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/10.10.10.228/auth-detail-20080619 expand: %t -> Thu Jun 19 16:09:10 2008 ++[auth_log] returns ok rlm_realm: No '@' in User-Name = "andyan", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 0 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop rlm_ldap: - authorize rlm_ldap: performing user authorization for andyan WARNING: Deprecated conditional expansion ":-". See "man unlang" for details expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=andyan) expand: ou=People,dc=eciad,dc=ca -> ou=People,dc=eciad,dc=ca rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to ldap1.eciad.ca:389, authentication 0 rlm_ldap: bind as / to ldap1.eciad.ca:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=People,dc=eciad,dc=ca, with filter (uid=andyan) rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? rlm_ldap: user andyan authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 90 to 10.10.10.228 port 1059 EAP-Message = 0x010100061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xce343774ce3522073b392edc718830e4 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.228 port 1059, id=91, length=275 User-Name = "andyan" NAS-IP-Address = 10.10.10.228 NAS-Port = 1 Called-Station-Id = "00-14-6C-CC-93-E8:ECIeduroam" Calling-Station-Id = "00-17-F2-52-8A-C7" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0201007015800000006616030100610100005d0301485ae7246df7cad8b3977bcb702121baac84e2a85197943b52e273243aa1543a000036002f000500040035000a000900030008000600320033003800390016001500140013001200110034003a0018001b001a0017001900010100 State = 0xce343774ce3522073b392edc718830e4 Message-Authenticator = 0xcb10e2b9445f9958feaab918576268bc +- entering group authorize expand: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /usr/local/var/log/radius/radacct/10.10.10.228/auth-detail-20080619 rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/10.10.10.228/auth-detail-20080619 expand: %t -> Thu Jun 19 16:09:11 2008 ++[auth_log] returns ok rlm_realm: No '@' in User-Name = "andyan", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 1 length 112 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/ttls rlm_eap: processing type ttls rlm_eap_ttls: Authenticate rlm_eap_tls: processing TLS TLS Length 102 rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0061], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 085e], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 91 to 10.10.10.228 port 1059 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x2af9434f85596064fc5bcd9b5f2e16f426c39ff51614c80a65c2e067a3a4c7911a38a3b8839007ea4d03cbda93410f383e643cd8bd788e9e14d2b3abd1067ad10efcc6eb0f8b8c0302ff00327e8604af8c16debd1e6ca2195d2b8187ca25e77d5f7bd4c84b985981baf5fd0be7cabe98da5d14817bd3ad62f2ac4f281098433100a22663ddb348f2a6ed0dd82f1de13a8ad2a57a3afe6d1e82eca0bf7f708ef7b7999a1af5b78b30171d2a40ce03d8b4daedcacd5bd389559f4b7fc82a4c411712829a3b5a09686b33a1c50abe21e8cff6189d8a481e19871e6f8b629e79dbf5ff590203010001a317301530130603551d25040c300a06082b06010505 EAP-Message = 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 EAP-Message = 0x2889877f5db3c70defc739be Message-Authenticator = 0x00000000000000000000000000000000 State = 0xce343774cf3622073b392edc718830e4 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.228 port 1059, id=92, length=169 User-Name = "andyan" NAS-IP-Address = 10.10.10.228 NAS-Port = 1 Called-Station-Id = "00-14-6C-CC-93-E8:ECIeduroam" Calling-Station-Id = "00-17-F2-52-8A-C7" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020200061500 State = 0xce343774cf3622073b392edc718830e4 Message-Authenticator = 0x5e4e63959239fca2486e0190d9d3c54a +- entering group authorize expand: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /usr/local/var/log/radius/radacct/10.10.10.228/auth-detail-20080619 rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/10.10.10.228/auth-detail-20080619 expand: %t -> Thu Jun 19 16:09:11 2008 ++[auth_log] returns ok rlm_realm: No '@' in User-Name = "andyan", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 2 length 6 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/ttls rlm_eap: processing type ttls rlm_eap_ttls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 92 to 10.10.10.228 port 1059 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xb78977c9a55b9a3571e655a3 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xce343774cc3722073b392edc718830e4 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.228 port 1059, id=93, length=169 User-Name = "andyan" NAS-IP-Address = 10.10.10.228 NAS-Port = 1 Called-Station-Id = "00-14-6C-CC-93-E8:ECIeduroam" Calling-Station-Id = "00-17-F2-52-8A-C7" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020300061500 State = 0xce343774cc3722073b392edc718830e4 Message-Authenticator = 0x3d44409ada91a802ad38c9516b7bd15f +- entering group authorize expand: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /usr/local/var/log/radius/radacct/10.10.10.228/auth-detail-20080619 rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/10.10.10.228/auth-detail-20080619 expand: %t -> Thu Jun 19 16:09:11 2008 ++[auth_log] returns ok rlm_realm: No '@' in User-Name = "andyan", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 3 length 6 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/ttls rlm_eap: processing type ttls rlm_eap_ttls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 93 to 10.10.10.228 port 1059 EAP-Message = 0x010400d91580000008bb04ae601515d34e563c02cc3de859401a836dc8d5b9e0c675cc610078839fc238a6f3ca30ce79381a61c588416489587635fe1fa874b66bc643d652e322305ad54f40382d23f7fe74c6df9df734c099780d8604e304ca13d8bc9e2bb3ebd9221731634de6099bb36ff584bae8b16bfd00d3b19ffe67c20b40e9d66366325f55810904fc6fa593c6186bf3cedd075e3c447a65a23d444547c434ec02220b377133980437496ee79601f296ea241e10ed902bcdf83adac9980a26ac91f4b034ef1e88febcd2e3a416030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xce343774cd3022073b392edc718830e4 Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.228 port 1059, id=94, length=501 User-Name = "andyan" NAS-IP-Address = 10.10.10.228 NAS-Port = 1 Called-Station-Id = "00-14-6C-CC-93-E8:ECIeduroam" Calling-Station-Id = "00-17-F2-52-8A-C7" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 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 EAP-Message = 0x991c03d2e3f57e56e36db67b21563e3f97502d4fba252d8a1403010001011603010030cf151f5b366eda1330659c1f3f5e55339fdc3d1e066553f4e1617ef016a82b2051a71cabd5dd256233a3c13b835765ac State = 0xce343774cd3022073b392edc718830e4 Message-Authenticator = 0x5b6d9e9a04ef65ad4b374225d10a39f0 +- entering group authorize expand: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /usr/local/var/log/radius/radacct/10.10.10.228/auth-detail-20080619 rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/10.10.10.228/auth-detail-20080619 expand: %t -> Thu Jun 19 16:09:11 2008 ++[auth_log] returns ok rlm_realm: No '@' in User-Name = "andyan", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 4 length 253 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/ttls rlm_eap: processing type ttls rlm_eap_ttls: Authenticate rlm_eap_tls: processing TLS TLS Length 326 rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully SSL Connection Established eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 94 to 10.10.10.228 port 1059 EAP-Message = 0x0105004515800000003b1403010001011603010030dcbc638acd36ffa613cef9ef9af25c610a95b3484085d983ad7512401dfb83682e456974cac1172d9fc413f44fcaebac Message-Authenticator = 0x00000000000000000000000000000000 State = 0xce343774ca3122073b392edc718830e4 Finished request 4. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 10.10.10.228 port 1059, id=95, length=322 User-Name = "andyan" NAS-IP-Address = 10.10.10.228 NAS-Port = 1 Called-Station-Id = "00-14-6C-CC-93-E8:ECIeduroam" Calling-Station-Id = "00-17-F2-52-8A-C7" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0205009f1580000000951703010090987fd6d5cc5864599d5ca410f41de2a2044d322da2a89e7460dee718bd49305e426f8dedf5e8487d84e977a7c3a9206c6de4d1824fada2d41244382e57d30b801ebda16a9ebb3e74dd6b62a2bdcc36755a8f8b26fb36454ed404c3d9eb4f13b8337e25e6c7a4fa21f8497db0a782833b513c8335207e868ac0bfa876fc3db0414a4ae8deccd03be7748f5907fbe04d36 State = 0xce343774ca3122073b392edc718830e4 Message-Authenticator = 0xa2874e59a7ffafb2940d2853a2fbe36e +- entering group authorize expand: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /usr/local/var/log/radius/radacct/10.10.10.228/auth-detail-20080619 rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/10.10.10.228/auth-detail-20080619 expand: %t -> Thu Jun 19 16:09:11 2008 ++[auth_log] returns ok rlm_realm: No '@' in User-Name = "andyan", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 5 length 159 rlm_eap: Continuing tunnel setup. ++[eap] returns ok rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: Request found, released from the list rlm_eap: EAP/ttls rlm_eap: processing type ttls rlm_eap_ttls: Authenticate rlm_eap_tls: processing TLS TLS Length 149 rlm_eap_tls: Length Included eaptls_verify returned 11 eaptls_process returned 7 rlm_eap_ttls: Session established. Proceeding to decode tunneled attributes. +- entering group authorize rlm_realm: No '@' in User-Name = "andyan", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop ++[control] returns noop rlm_eap: No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop rlm_ldap: - authorize rlm_ldap: performing user authorization for andyan WARNING: Deprecated conditional expansion ":-". See "man unlang" for details expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=andyan) expand: ou=People,dc=eciad,dc=ca -> ou=People,dc=eciad,dc=ca rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=People,dc=eciad,dc=ca, with filter (uid=andyan) rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? rlm_ldap: user andyan authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. TTLS: Got tunneled Access-Reject rlm_eap: Handler failed in EAP/ttls rlm_eap: Failed in EAP select ++[eap] returns invalid auth: Failed to validate the user. Found Post-Auth-Type Reject +- entering group REJECT expand: %{User-Name} -> andyan attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Sending Access-Reject of id 95 to 10.10.10.228 port 1059 EAP-Message = 0x04050004 Message-Authenticator = 0x00000000000000000000000000000000 Finished request 5. Going to the next request Waking up in 4.4 seconds. Cleaning up request 0 ID 90 with timestamp +72 Cleaning up request 1 ID 91 with timestamp +73 Cleaning up request 2 ID 92 with timestamp +73 Cleaning up request 3 ID 93 with timestamp +73 Cleaning up request 4 ID 94 with timestamp +73 Waking up in 0.3 seconds. Cleaning up request 5 ID 95 with timestamp +73 Ready to process requests. --

4 7

freeradius assign duplicate ip address Error
by Deep Purple 21 Jun '08

21 Jun '08

freeradius assign duplicate ip address , i using ippool module and file, for example user1 get the 172.16.1.30 and some times (not always ) user2 get the same 172.16.1.30 freeradius-1.1.7.tar.gz freeradius-client-1.1.5.tar.bz2 pptpd-1.3.3-1.fc5.i386.rpm Please Help me ________________________________________________________ 180도 달라진 야후! 메일 - 여러 개의 메시지를 동시에 확인? 새로운 야후! 메일의 탭으로 가능해집니다. http://kr.content.mail.yahoo.com/cgland

2 1

Problem in connecting to switch on telnet
by Guk Viktor 21 Jun '08

21 Jun '08

To all thanks. It was necessary to do thus: admin Service-Type = Login-User Login-Service = Telnet, 3Com-User-Access-Level = Administrator > You will need to read the switch documentation to see what attributes do > you need to return in order to connect. Mostly it's returning the > correct Service-Type attribute. > > Ivan Kalik > Kalik Informatika ISP > > > Dana 18/6/2008, "Guk Viktor" <v.guk(a)zaz.zp.ua> pi?e: > > >> >By thanks for help, I was dismantled. But another problem arose. >> > >> >Radius answers: >> >modcall: entering group authenticate for request 0 >> > HASH: user admin found in hashtable bucket 45083 >> > modcall[authenticate]: module "unix" returns ok for request 0 >> >modcall: leaving group authenticate (returns ok) for request 0 >> >Login OK: [admin/admin] (from client 10.0.1.2 port 117616641 cli >> >0000-0000-0000) >> >Sending Access-Accept of id 19 to 10.0.1.2 port 5007 >> > 3Com-User-Access-Level = Administrator >> >Finished request 0 >> > >> >But I cannot be connected on telnet. Now switch(3com 5500-EI) answers >> >that incorrect password: >> >Username:admin >> >Password: >> >% Login failed! >> >>> >> Prompt, what to make in that case. In the file /etc/passwd there is >>> >>>> >> >this line of " admin:x:500:500::/home/admin:/bin/bash ". How it >>>> >> >is necessary to assign password? >>>> >> > >>>> >> > >>>> >> >Message: 4 >>>> >> >Date: Tue, 17 Jun 2008 09:33:31 +0100 >>>> >> >From: "Ivan Kalik" <tnt(a)kalik.net> >>>> >> >Subject: Re: Problem in connecting to switch on telnet >>>> >> >To: "FreeRadius users mailing list" >>>> >> > <freeradius-users(a)lists.freeradius.org> >>>> >> >Message-ID: <JBqwPney.1213691611.8437380.tnt(a)kalik.co.yu> >>>> >> >Content-Type: text/plain; charset=ISO-8859-2 >>>> >> > >>>> >> >You have deleted the part of the debug which tells how is Auth-Type set. >>>> >> >Post the whole thing. BTW, now you do have admin account in /etc/passwd >>>> >> >but the password is wrong. It's still not using password from the users >>>> >> >file. >>>> >> > >>>> >> >Ivan Kalik >>>> >> >Kalik Informatika ISP >>>> >> > >>>> >> > >>>> >> >Dana 17/6/2008, "Guk Viktor" <v.guk(a)zaz.zp.ua> pi?e: >>>> >> > >>>> >> > >>>> >> > >>>> >> > It tried without Auth-Type = System, also tried Auth-Type = Local. >>>> >> > >>>> >> >Processing the authenticate section of radius.conf >>>> >> >modcall: entering group authenticate for request 0 >>>> >> >rlm_unix: [admin]: invalid password >>>> >> >modcall[authenticate]: module "unix" returns reject for request 0 >>>> >> >modcall: leaving group authenticate (returns reject) for request 0 >>>> >> >auth: Failed to validate the user. >>>> >> >Login incorrect: [admin/admin] (from client 10.0.1.2 port 117612545 cli >>>> >> >0000-0000-0000) >>>> >> > >>>> >> > >>>> >> > Message: 4 Date: Fri, 13 Jun 2008 15:38:57 +0100 From: "Ivan Kalik" >>>> >> ><tnt(a)kalik.net> Subject: Re: Problem in connecting to switch on telnet >>>> >> >To: "FreeRadius users mailing list" >>>> >> ><freeradius-users(a)lists.freeradius.org> Message-ID: >>>> >> ><wbdeeigX.1213367937.5098900.tnt(a)kalik.co.yu> Content-Type: >>>> >> >text/plain; charset=ISO-8859-2 You are setting up the wrong >>>> >> >authentication type. Remove Auth-Type =System from user configuration. >>>> >> >1.1.3 is old. I am not sure do you need to set Auth-Type there. If it >>>> >> >doesn't work without it set Auth-Type = Local. Ivan Kalik Kalik >>>> >> >Informatika ISP Dana 13/6/2008, "Guk Viktor" <v.guk(a)zaz.zp.ua> pi?e: >>>> >> > >>>> >> > >>>> >> > >>>> >> > >>>> >> > >>>> >> > >>>> >> > >>>> >> > >>>> >> >Hello, >>>> >> > >>>> >> >I have freeradius-1.1.3 and 3com switch 5500-EI. On the >>>> >> >switch is disposed the access of users into the network through >>>> >> >freeradius. Arose problem in >>>> >> >connecting to switch on telnet. In the log freeradius it is indicated >>>> >> >that the incorrect password (however password I introduce correctly). >>>> >> > >>>> >> >rad_recv: Access-Request packet from host 10.0.1.2:5007, id=1, >>>> >> >length=203 >>>> >> >??????? User-Name = "admin" >>>> >> >??????? User-Password = "admin" >>>> >> >??????? NAS-IP-Address = 10.0.1.2 >>>> >> >??????? NAS-Identifier = "001ac1d4ee42" >>>> >> >??????? NAS-Port = 117612545 >>>> >> >??????? NAS-Port-Id = "unit=7;subslot=0;port=42;vlanid=1" >>>> >> >??????? NAS-Port-Type = Ethernet >>>> >> >??????? Service-Type = Login-User >>>> >> >??????? Login-IP-Host = 10.0.1.2 >>>> >> >??????? Calling-Station-Id = "0000-0000-0000" >>>> >> >??????? Framed-IP-Address = 10.0.1.100 >>>> >> >??????? Vendor-25506-Attr-26 = 0x00000003 >>>> >> >??????? Vendor-25506-Attr-255 = 0x353530302d4549 >>>> >> >??????? Vendor-25506-Attr-60 = >>>> >> >0x31302e302e312e3130302030303a30303a30303a30303a30303a3030 >>>> >> >??????? Vendor-25506-Attr-59 = 0x38e68c68 >>>> >> >? Processing the authorize section of radiusd.conf >>>> >> >modcall: entering group authorize for request 0 >>>> >> >? modcall[authorize]: module "mschap" returns noop for request 0 >>>> >> >??? rlm_realm: No '\' in User-Name = "admin", looking up realm NULL >>>> >> >??? rlm_realm: No such realm "NULL" >>>> >> >? modcall[authorize]: module "ntdomain" returns noop for request 0 >>>> >> >? rlm_eap: No EAP-Message, not doing EAP >>>> >> >? modcall[authorize]: module "eap" returns noop for request 0 >>>> >> >??? users: Matched entry DEFAULT at line 152 >>>> >> >??? users: Matched entry admin at line 216 >>>> >> >? modcall[authorize]: module "files" returns ok for request 0 >>>> >> >modcall: leaving group authorize (returns ok) for request 0 >>>> >> >? rad_check_password:? Found Auth-Type System >>>> >> >auth: type "System" >>>> >> >? Processing the authenticate section of >>>> >> >radiusd.conf >>>> >> >modcall: entering group authenticate for request 0 >>>> >> >? modcall[authenticate]: module "unix" returns notfound for request 0 >>>> >> >modcall: leaving group authenticate (returns notfound) for request 0 >>>> >> >auth: Failed to validate the user. >>>> >> >Login incorrect: [admin/admin] (from >>>> >> >client 10.0.1.2 port 117612545 cli 0000-0000-0000) >>>> >> >Delaying request 0 for 1 seconds >>>> >> >Finished request 0 >>>> >> > >>>> >> >Users: >>>> >> >admin?? Auth-Type = System, User-Password == "admin" >>>> >> >??? ?? 3Com-User-Access-Level = Administrator >>>> >> > >>>> >> >eap.conf: >>>> >> >eap{ >>>> >> >??? default_eap_type = peap >>>> >> >??? timer_expire = 60 >>>> >> >??? ignore_unknown_eap_type = no >>>> >> >??? cisco_accounting_username_bug = no >>>> >> >??? >>>> >> >??? md5{ >>>> >> >??? ?? } >>>> >> > >>>> >> >??? leap{ >>>> >> >??? ?? } >>>> >> > >>>> >> >??? gtc{ >>>> >> >??? ?? auth_type = PAP >>>> >> >??? ?? } >>>> >> > >>>> >> >??? peap{ >>>> >> >??? ?? default_eap_type = mschapv2 >>>> >> >??? ?? use_tunneled_reply = yes >>>> >> >??? ?? } >>>> >> > >>>> >> >??? mschapv2{ >>>> >> >??? ?? } >>>> >> >??? } >>>> >> > >>>> >> >It can possibly use a local authorization to switch on telnet, >>>> >> >without freeradius. >>>> >> > >>>> >> >Viktor Guk >>>>

1 0