- Freeradius-Users - lists.freeradius.org

Problem (?) with multiple dhcp sites and 2.0.5
by Evgeniy Kozhuhovskiy 16 Jun '08

16 Jun '08

I'm trying to configure two dhcp sites on different interfaces. part of first site: listen { ipaddr = * port = 67 type = dhcp interface = eth1.940 } second: listen { ipaddr = * port = 67 type = dhcp interface = eth0 } ERROR: Failed to open socket: cannot bind socket: Address already in use /usr/local/freeradius205pre/etc/raddb/sites-enabled/dhcp-iptv[90]: Error binding to port for 0.0.0.0 port 67 Ok, i'm trying to specify exactly ip addresses of interfaces - but nothing works - because dhcp requests came with 255.255.255.255 destination address - and freeradius does not recieve this packets. -- With best regards, Evgeniy Kozhuhovskiy, Leader of Services team, Minsk State Phony Network, RUE Beltelecom.

2 1

Porbleme in forwarding Framed-ip-address from a HP procurves 2650 to the client????
by hassan_jemmali 15 Jun '08

15 Jun '08

Hi everybody, I'm using a freeradius 1.8 on ubuntu 8.04..I've installed it,and everything works fine when i use mac-based authentication..The problem is when i send in my packet "access accept" some attributes like Framed-ip-Adress,i can not apply it to my client..In other words,i see that my freeradius sent this attributes to my 2650 procurve switch,but the Ip address of my clients never change,when i put my client in DHCP Ip address acquiring.I configured my switch as the official document in the site of HP said to do(i enabled mac-based authetication,put the format...),but the Framed-ip-address is never forwarded to my client even when it is accepted by Freeradius. Is there some configuration i have to apply to my client so it can apply the Framed-IP-address?? Have I to do some other configuration to my switch so it can forward my Framed-ip-address sent by free radius to my client??? Please help me i don't know what to do,i'm Blocked since 4days. -- View this message in context: http://www.nabble.com/Porbleme-in-forwarding-Framed-ip-address-from-a-HP-pr… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 1

eap/tls authentication problem
by Mike Zoeteweij 15 Jun '08

15 Jun '08

Hello all, I'm relatively new with freeradius. I got freeradius running fine as aaa server and want to extend t authenticate my wireless. I'm testing with a linksys wrt54g ap. I've done a lot of reading on how to configure eap/tls but for some reason I can't get it to work. Can anybody give me a some advise how to get this to work see below a screen dump of the freeradius server. rad_recv: Access-Request packet from host 192.168.100.5:2689, id=3, length=1660 Message-Authenticator = 0x9a0b07611fd6b83251839c544b3552e6 Service-Type = Framed-User User-Name = "mike" Framed-MTU = 1488 State = 0x55654869c3d2859237b430d6df9b6c0f Called-Station-Id = "00-18-F8-F5-87-53:mikiemike" Calling-Station-Id = "00-13-E8-94-F3-B5" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x7ce49d2f89daca63bb3559bd962e798378a495188528527b4fc3024a7bb03cb2bbd35185a43df406aaa4f9bbee0fd1476c79036890bae4a15ef849c012cb317cb653f20044c1a2551074b8dc6587f74fea698120e3c9b660f3c877c147ccc7b06fab427f809a92aa68b6f087d4e7b5f9a8af070ad62829f83d7ffa41c85325ec2febccf83bd9f202a05864788b887568f28084475331515aa9d8e2042bba7ad81514030100010116030100200599856b69ece58d8f82454916c6fcab3f13833e107f17f8967c3c6c8cd061ad NAS-IP-Address = 192.168.100.5 NAS-Port = 1 NAS-Port-Id = "STA port # 1" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 13 modcall[authorize]: module "preprocess" returns ok for request 13 modcall[authorize]: module "chap" returns noop for request 13 modcall[authorize]: module "mschap" returns noop for request 13 rlm_realm: No '@' in User-Name = "mike", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 13 rlm_eap: EAP packet type response id 3 length 253 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 13 users: Matched DEFAULT at 152 users: Matched DEFAULT at 171 users: Matched mike at 219 modcall[authorize]: module "files" returns ok for request 13 modcall: group authorize returns updated for request 13 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 13 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0377], Certificate --> verify error:num=20:unable to get local issuer certificate chain-depth=0, error=20 --> User-Name = mike --> BUF-Name = mike --> subject = /C=NL/ST=Netherlands/O=C2C/CN=mike/emailAddress=mike(a)xxx.xx --> issuer = /C=NL/ST=Netherlands/O=C2C/CN=BDHZ_server/emailAddress=mike(a)xxx.xx --> verify return:0 rlm_eap_tls: >>> TLS 1.0 Alert [length 0002], fatal unknown_ca TLS Alert write:fatal:unknown CA TLS_accept:error in SSLv3 read client certificate B 6996:error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned:s3_srvr.c:2004: rlm_eap_tls: SSL_read failed in a system call (-1), TLS session fails. In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 13 modcall: group authenticate returns handled for request 13 Sending Access-Challenge of id 3 to 192.168.100.5:2689 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User EAP-Message = 0x010400110d800000000715030100020230 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa6541df7517449f2bd7e2604271974c9 Finished request 13 Going to the next request Waking up in 3 seconds... rad_recv: Access-Request packet from host 192.168.100.5:2689, id=4, length=187 Message-Authenticator = 0x8bcace05bb96496c05ea2f310c463505 Service-Type = Framed-User User-Name = "mike" Framed-MTU = 1488 State = 0xa6541df7517449f2bd7e2604271974c9 Called-Station-Id = "00-18-F8-F5-87-53:mikiemike" Calling-Station-Id = "00-13-E8-94-F3-B5" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020400060d00 NAS-IP-Address = 192.168.100.5 NAS-Port = 1 NAS-Port-Id = "STA port # 1" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 14 modcall[authorize]: module "preprocess" returns ok for request 14 modcall[authorize]: module "chap" returns noop for request 14 modcall[authorize]: module "mschap" returns noop for request 14 rlm_realm: No '@' in User-Name = "mike", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 14 rlm_eap: EAP packet type response id 4 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 14 users: Matched DEFAULT at 152 users: Matched DEFAULT at 171 users: Matched mike at 219 modcall[authorize]: module "files" returns ok for request 14 modcall: group authorize returns updated for request 14 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 14 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack alert eaptls_verify returned 4 eaptls_process returned 4 rlm_eap: Handler failed in EAP/tls rlm_eap: Failed in EAP select modcall[authenticate]: module "eap" returns invalid for request 14 modcall: group authenticate returns invalid for request 14 auth: Failed to validate the user. Login incorrect: [mike/<no User-Password attribute>] (from client mikiemike.net port 1 cli 00-13-E8-94-F3-B5) Delaying request 14 for 1 seconds Finished request 14 Going to the next request Waking up in 3 seconds... rad_recv: Access-Request packet from host 192.168.100.5:2689, id=4, length=187 Sending Access-Reject of id 4 to 192.168.100.5:2689 EAP-Message = 0x04040004 Message-Authenticator = 0x00000000000000000000000000000000 --- Walking the entire request list --- Cleaning up request 5 ID 0 with timestamp 48552e1d Can anybody help me? Thanks in advance regards, Mike

2 2

simple web interface
by Vittore Zen 15 Jun '08

15 Jun '08

Hi, anyone have a simple php web mysql users interface? More more more simple that dialup admin. The manager will do: 1. insert/modify a user account 2. give a password 3. setup start-end life (time) of account 4. setup a detail (name) Any? v.

6 6

problem configuring freeradius with ldap user database
by Sambuddho Chakravarty 15 Jun '08

15 Jun '08

Hello All I am experiencing a problem while trying to authenticate the username/password in LDAP through a freeradius server. While a regular telnet/ssh to the edge running a openLdap client / PAM module works fine (It is able to authenticate) but the problem arises when trying to authenticate using the freeradius server . This is what the log message looks like : User-Name = "try" User-Password = "trialanderror" NAS-IP-Address = 127.0.0.1 NAS-Port = 2 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "try", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 155 modcall[authorize]: module "files" returns ok for request 0 rlm_ldap: - authorize rlm_ldap: performing user authorization for try radius_xlat: '(uid=try)' radius_xlat: 'ou=People,dc=example,dc=com' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to 30.0.0.2:389, authentication 0 rlm_ldap: bind as / to 30.0.0.2:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=People,dc=example,dc=com, with filter (uid=try) rlm_ldap: Added password {crypt}$1$2Pl0Lm5O$ot8mrXYBaAg12RoBogNDK. in check items rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user try authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 0 modcall: group authorize returns ok for request 0 rad_check_password: Found Auth-Type LDAP auth: type "LDAP" Processing the authenticate section of radiusd.conf modcall: entering group Auth-Type for request 0 rlm_ldap: - authenticate rlm_ldap: login attempt by "try" with password "trialanderror" rlm_ldap: user DN: uid=try,ou=People,dc=example,dc=com rlm_ldap: (re)connect to 30.0.0.2:389, authentication 1 rlm_ldap: bind as uid=try,ou=People,dc=example,dc=com/trialanderror to 30.0.0.2:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind failed with invalid credentials modcall[authenticate]: module "ldap" returns reject for request 0 modcall: group Auth-Type returns reject for request 0 auth: Failed to validate the user. Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... Here you can see that the authorization of a user 'try' having password 'trialanderror' works fine but authentication fails. The host running the freeradius server is Fedora Core 5 running linux 2.6.25. Could you please suggest where we are going wrong. I am sending you a copy of the /etc/raddb/users file as well. DEFAULT Auth-Type = System Fall-Through = 1 DEFAULT Auth-Type := LDAP Fall-Through = 0 Any help would be gratefully appreciated. Thanks Sambuddho

3 4

Saludos lista
by Yurkis Isaac Ortiz ® 14 Jun '08

14 Jun '08

Saludos lista. Soy nuevo y necesito saber configurar mi freeradius quiero usar freeradius+portslave+ppp Estoy usando debian etch --------------------------------------------------------- Yurkis Isaac Ortiz ® Administrador de Red Oficina Territorial de Normalización Stgo de Cuba e_mail: yurkis(a)otn.ciges.inf.cu Linux User: 446188 Tel: 641406, 642008, 642044 Ext 136

2 1

freeradius resources
by Rogelio 14 Jun '08

14 Jun '08

Hi all, just started delving into RADIUS and have begun to take the plunge with FreeRADIUS. Any suggested books on the subject? I see quite a few on the subject: http://tinyurl.com/4xudfm

3 2

Dynamic clients from SQL.
by Alan DeKok 14 Jun '08

14 Jun '08

$ cvs update $ more raddb/sites-available/dynamic-clients It Just Works. You can now manage clients in an SQL table. When the server receives packets from a new client, it looks up the IP in SQL. The clients can expire (so shared secrets can be changed). When 'readclients=yes' is set in sql.conf, you only need one "client" entry in the configuration files. The dynamic clients can be read from anywhere... not just from SQL. The configuration needs to be tested, as the SQL example in the "dynamic-clients" file may not be exactly correct. But it should be relatively easy to fix. Client lookups are rate-limited, so DoS attacks won't affect the server. The lookups are done NO MORE THAN once a second after the server starts. Alan DeKok.

2 2

aaa with external script
by Anooshiravan Merat 14 Jun '08

14 Jun '08

I am starting my radius in debug mode with this command: radiusd -X when connecting from client machine i m getting this error ...radius tell me like this. rad_recv: Access-Request packet from host 127.0.0.1:32768, id=237

2 1

About client.conf
by Fabián Omar Franzotti 14 Jun '08

14 Jun '08

Hi guys I did install Freeradius 2.0.4 and i don't find the way to configure client 0.0.0.0/0 { secret = mysecret shortname = allworld } I have this configuration over older Freeradius, but with this version do not work can any one tell my how configure it in this version? Thanks

3 4