- Freeradius-Users - lists.freeradius.org

Problem with CHAP, rlm_ldap, edir
by Lothar.Haeger＠steria-mummert.de 19 May '08

19 May '08

stupid me! wasn't the freeradius config, that's just fine with ldap being edirectory. Only I had "overconfigured" my testaccount by setting Auth-Type=LDAP on it, so all other types were rejected ;-( Removed that ldap attribute and see, it works :-) Cheers, Lothar

1 0

Facing problem is configuring freeradius for eap-ts
by smita P 19 May '08

19 May '08

3 2

Re : howto EAP-TLS on freeradius 2.0.2-3 ??
by Joel MBA OYONE 18 May '08

18 May '08

So i really wonder where is the problem !!! maybe it is due to the hardware i use... my switch is wireless controller -all AP rceive their config (RF, SSID, channels, Power Radio, security styuffs, etc..) from the switch. so when RADIUS authentication is set-up, every AP have to be authenticated by Freeradius before receiving the correct parameters by FR, using its @MAC as login and the word NOPASSWORD as password (that the theoroy said. cause i had to set Auth-Type := Accept to make it work). at this stage, authenticator is the wireless switch. it works with or without 802.1x ON. it work fine, and the AP are well manged by a centralpoint. no RADIUS problem with AP authetication. - step2: when an AP is recognized, end-users have to be autneticated too by RADIUS. this step, like the documentation says, the managed AP becomes "Authenticator". -so an entry exist for every AP in clients.conf too) during the connection attempts, Radius receive acess request, and the correct certificate is chosen -he give me the correcte commonnameof certificate- but i think the supplicant (end-user on xp) never receive the access-challenge, even if it is sent by RADIUS Server. i don't know if i am well understood or if I "do" misundertood something but it works like that at me now. i installed, reinstalled and formated so much time that i am convincedthat i won't success alone. Hey Ivan, won't you try to help me to fix this stone? i have definitely nodelay anymore, and no solution too. Freeradius is your own and i ma pretty sure that we could both fix the problem between a quarter or a half if you take fulll remote control of my computer and network, assisting you and telling my purpose. thanx for help. ----- Message d'origine ---- De : Ivan Kalik <tnt(a)kalik.net> À : FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Envoyé le : Lundi, 19 Mai 2008, 0h37mn 23s Objet : RE: Re : Re : Re : howto EAP-TLS on freeradius 2.0.2-3 ?? >Ok, we assume my certificates are corrects. > >So i have some more questions: > > >- Certificate should be import for user accounts or for computer account ? Who/what ever is you supplicant trying to authenticate. If the supplicant can't find the correct certificate it will give up. > >- i use the file "users" as database for my accounts; when using eap-tls >when trying eap-peap my accounts looks like that: > >>> johndoe Auth-Type: = EAP, User-Password == Ă˘ďż˝ďż˝test1234" >>> Tunnel-Type = 13, >>> Tunnel-Medium-Type = 6, > >or >>> johndoe User-Password == Ă˘ďż˝ďż˝test1234" >>> Tunnel-Type = 13, >>> Tunnel-Medium-Type = 6, No, don't use Auth-Type. Use Cleartext-Password or NT-Password (names clearly suugest are they encrypted and how) with mschap. > > >- when i use eap-tls, it looks like that: > >>> johndoe >>> Tunnel-Type = 13, >>> Tunnel-Medium-Type = 6, >----- > >and sometimes, i add add the assignment of Vlan by using the attribute ' Tunnel-Private-Group-ID = 100" -vlan 100 is affected to the ssid i am interested in- > >is it correct? It will work, but it's more common to use "human" values (VLAN and IEEE-802). Ivan Kalik Kalik Informatika ISP - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html __________________________________________________ Do You Yahoo!? En finir avec le spam? Yahoo! Mail vous offre la meilleure protection possible contre les messages non sollicités http://mail.yahoo.fr Yahoo! Mail

1 0

Re : Re : Re : howto EAP-TLS on freeradius 2.0.2-3 ??
by Joel MBA OYONE 18 May '08

18 May '08

Ok, we assume my certificates are corrects. So i have some more questions: - Certificate should be import for user accounts or for computer account ? - i use the file "users" as database for my accounts; when using eap-tls when trying eap-peap my accounts looks like that: >> johndoe Auth-Type: = EAP, User-Password == â��test1234" >> Tunnel-Type = 13, >> Tunnel-Medium-Type = 6, or >> johndoe User-Password == â��test1234" >> Tunnel-Type = 13, >> Tunnel-Medium-Type = 6, - when i use eap-tls, it looks like that: >> johndoe >> Tunnel-Type = 13, >> Tunnel-Medium-Type = 6, ----- and sometimes, i add add the assignment of Vlan by using the attribute ' Tunnel-Private-Group-ID = 100" -vlan 100 is affected to the ssid i am interested in- is it correct? Yes! it is in the personal store! - so problem is not with certificate ?? in this case, wht should be checked? - config? - hardware? i'd like to use eap-tls and/or eap-peap MBA OYONE Joël Lot. El Firdaous Bât GH20, Porte A 204, Appt 8 20000 Oulfa Casablanca - Maroc Tél. : +212 69 25 85 70 ----- Message d'origine ---- De : Ivan Kalik <tnt(a)kalik.net> À : FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Envoyé le : Dimanche, 18 Mai 2008, 17h00mn 59s Objet : Re: Re : howto EAP-TLS on freeradius 2.0.2-3 ?? >you can view screenshots of the certificate here: > >- CA Certificate that i imported on XP with DER format: >http://img357.imageshack.us/img357/2264/cacertificate1wj4.jpg > >- Client Certificate with p12 format: >http://img164.imageshack.us/img164/2894/certifclient1kf1.jpg >http://img164.imageshack.us/img164/7527/certifclient2rv3.jpg > Those certificates are fine. Where did you import the client certificate? Is it in the Personal store? Ivan Kalik Kalik Informatika ISP - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html __________________________________________________ Do You Yahoo!? En finir avec le spam? Yahoo! Mail vous offre la meilleure protection possible contre les messages non sollicités http://mail.yahoo.fr Yahoo! Mail - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html __________________________________________________ Do You Yahoo!? En finir avec le spam? Yahoo! Mail vous offre la meilleure protection possible contre les messages non sollicités http://mail.yahoo.fr Yahoo! Mail

2 1

accounting_onoff_query and acctsessiontime = 0
by Tuc at T-B-O-H.NET 18 May '08

18 May '08

Hi, For the following : accounting_onoff_query = "\ UPDATE ${acct_table1} \ SET \ acctstoptime = '%S', \ acctsessiontime = unix_timestamp('%S') - \ unix_timestamp(acctstarttime), \ acctterminatecause = '%{Acct-Terminate-Cause}', \ acctstopdelay = %{%{Acct-Delay-Time}:-0} \ WHERE acctsessiontime = 0 \ AND acctstoptime = NULL \ AND nasipaddress = '%{NAS-IP-Address}' \ AND acctstarttime <= '%S'" Why is "acctsessiontime = 0" ? If the unit has been rebooted, the sessions left hanging, why do you search only for zero'd acctsessiontime? Thanks, Tuc

4 7

append avpair to proxied packet
by Jules Desforges 18 May '08

18 May '08

Hi, I receive DSL service from Supplier A, and provide DSL service to Customers A and B Supplier A ------ My Radius Server ------- Customer A | _Customer B Supplier A proxies the realms for Customer A,B to my server, I then proxy on the requests to the customers. This works fine, however I would like to append an AV-Pair to each respective customer, so they are given separate VRF's on the Cisco NAS. I need to append the following :- Cisco-AVPair = "lcp:interface-config#1=ip vrf forwarding vrf1\nip unnumbered lo100", I'm a bit confused as to where I add this, pre_proxy, post_proxy, and if the location of the vrf AVPair matters in the packet. If anyone has done something similar, or can give me some pointers please let me know. I'm running Freeradius 2.0.1 on OpenBSD sparc64 Thanks, Jules

2 1

Re : Re : howto EAP-TLS on freeradius 2.0.2-3 ??
by Joel MBA OYONE 18 May '08

18 May '08

Yes! it is in the personal store! - so problem is not with certificate ?? in this case, wht should be checked? - config? - hardware? i'd like to use eap-tls and/or eap-peap MBA OYONE Joël Lot. El Firdaous Bât GH20, Porte A 204, Appt 8 20000 Oulfa Casablanca - Maroc Tél. : +212 69 25 85 70 ----- Message d'origine ---- De : Ivan Kalik <tnt(a)kalik.net> À : FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Envoyé le : Dimanche, 18 Mai 2008, 17h00mn 59s Objet : Re: Re : howto EAP-TLS on freeradius 2.0.2-3 ?? >you can view screenshots of the certificate here: > >- CA Certificate that i imported on XP with DER format: >http://img357.imageshack.us/img357/2264/cacertificate1wj4.jpg > >- Client Certificate with p12 format: >http://img164.imageshack.us/img164/2894/certifclient1kf1.jpg >http://img164.imageshack.us/img164/7527/certifclient2rv3.jpg > Those certificates are fine. Where did you import the client certificate? Is it in the Personal store? Ivan Kalik Kalik Informatika ISP - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html __________________________________________________ Do You Yahoo!? En finir avec le spam? Yahoo! Mail vous offre la meilleure protection possible contre les messages non sollicités http://mail.yahoo.fr Yahoo! Mail

1 0

Re : howto EAP-TLS on freeradius 2.0.2-3 ??
by Joel MBA OYONE 18 May '08

18 May '08

Ivan Kalik wrote: > Please don't mess with configuration. Default one works. Your problem > was with the user certificate. http://www.procurve.com/NR/rdonlyres/06538B80-6DB0-4AC6-893E-8E8E12A180C6/0… > On page 52 you have a picture of the Details tab list with Enhanced Key > Usage filed containing client OID. Does your client certificate have > that field and that value? Hi Ivan! you can view screenshots of the certificate here: - CA Certificate that i imported on XP with DER format: http://img357.imageshack.us/img357/2264/cacertificate1wj4.jpg - Client Certificate with p12 format: http://img164.imageshack.us/img164/2894/certifclient1kf1.jpg http://img164.imageshack.us/img164/7527/certifclient2rv3.jpg sorry for the delay, i was in a trip! I am still blocked on "Identity validation when i try to use eap-tls" attached files contain snapshot of my CA certificate (cacert.der) and my client certificate (joel_certs.p12) olus the command lines applied to obtain them. Please let me know if they are corrects, like i suppose it to be! here is my eap-tls configuration: #################################################################### Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/CA/other_keys/servradiuskey.pem" certificate_file = "/etc/raddb/certs/CA/certs/serverradiuscert.pem" CA_file = "/etc/raddb/certs/CA/cacert.pem" private_key_password = "wireless" dh_file = "/etc/raddb/certs/CA/dh" random_file = "/etc/raddb/certs/CA/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" } ############################################################### My scripts: ###################################################################### # Creating a new self-signed CA certificate ###################################################################### cakey.key cacert.pem: openssl req -new -x509 -keyout cakey.pem -out cacert.pem -config ./ca.cnf # DER Forma of rhe CA certificate, that i imported on windows XP ca.der: ca.pem (DER format) openssl x509 -inform PEM -outform DER -in cac.pem -out ca.der ###################################################################### # Creating a certificate request for Server ###################################################################### openssl req -newkey rsa:1024 -keyout /etc/raddb/certs/CA/other_keys/servradiuskey.pem -out /etc/raddb/certs/CA/req/servradius_cert.req ###################################################################### # Signing the Server certificate with the correctextension ###################################################################### openssl ca -out /etc/raddb/certs/CA/certs/serverradiuscert.pem -extensions xpserver_ext -extfile /etc/ssl/xpextensions -infiles /etc/raddb/certs/CA/req/servradius_cert.req ###################################################################### # Creating a certificate request for Client ###################################################################### openssl req -new -nodes -keyout /etc/raddb/certs/CA/other_keys/joelkey.pem -out /etc/raddb/certs/CA/req/joel_cert.req ###################################################################### # Signing the Client certificate with the correctextension ###################################################################### openssl ca -out /etc/raddb/certs/CA/certs/joel_cert.pem -extensions xpclient_ext -extfile /etc/ssl/xpextensions -infiles /etc/raddb/certs/CA/req/joel_cert.req ###################################################################### # Converting the Client certificate in p12 file ###################################################################### openssl pkcs12 -export -in CA/certs/joel_cert.pem -inkey CA/other_keys/joelkey.pem -out /etc/raddb/certs/CA/certs/joel_certs.p12 -clcerts ###################################################################### ** lemme know if i did something wrong creating my certificate please** That is all i did. Thank you =================================================================================== ====================================================================================================================================================================== Please don't mess with configuration. Default one works. Your problem was with the user certificate. http://www.procurve.com/NR/rdonlyres/06538B80-6DB0-4AC6-893E-8E8E12A180C6/0… On page 52 you have a picture of the Details tab list with Enhanced Key Usage filed containing client OID. Does your client certificate have that field and that value? Ivan Kalik Kalik Informatika ISP Dana 7/5/2008, "Joel MBA OYONE" <mba_oyone(a)yahoo.fr> piše: >Ok, > >i think i really missed something! that config should take less than 15 minutes but i can't solve my problem for more than a week. > >Alan or Ivan, could you give me a half our to help me to fix my RADIUS EAP-TLS config please. i would like to give you a full access to my network and my terminal too, so the diagnostic should be very very easy for you! >is it possible? > > >MBA OYONE JoĂŤl >Lot. El Firdaous >BĂ˘t GH20, Porte A 204, Appt 8 >20000 Oulfa >Casablanca - Maroc > >TĂŠl. : +212 69 25 85 70 > > >----- Message d'origine ---- >De : Alan DeKok <aland(a)deployingradius.com> >Ă� : FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> >EnvoyĂŠ le : Lundi, 5 Mai 2008, 17h18mn 10s >Objet : Re: Re : howto EAP-TLS on freeradius 2.0.2-3 ?? > >Joel MBA OYONE wrote: >... >> The VLAN attributes defined in RFC3580 are as follows: >> â�˘ Tunnel-Type=VLAN (13) >> â�˘ Tunnel-Medium-Type=802 >> â�˘ Tunnel-Private-Group-ID=VLANID >> >> NOTE: The FreeRADIUS dictionary maps the 802 string value to the integer 6, which >> is why client entries use 6 for the Tunnel-Medium-Type value. > > No. For Tunnel-Medium-Type, "802" is a *name*, not a *number*. See >Section 3.2 of RFC 2868: > >... > Value > The Value field is three octets and contains one of the values > listed under "Address Family Numbers" in [14]. For the sake of > convenience, a relevant excerpt of this list is reproduced below. > > 1 IPv4 (IP version 4) > 2 IPv6 (IP version 6) > 3 NSAP > 4 HDLC (8-bit multidrop) > 5 BBN 1822 > 6 802 (includes all 802 media plus Ethernet "canonical format") >... > > FreeRADIUS gets it *right*. Many NAS vendors get it *wrong*. > >> To create a user and assign the user to a particular VLAN by using FreeRADIUS, open the >> etc/raddb/users file, which contains the user account information, and add for the new user. >> The following example shows the entry for a user in the users file. The username is >> â��johndoe,â�� the password is â��test1234.â�� The user is assigned to VLAN 77. >> >> johndoe Auth-Type: = EAP, User-Password == â��test1234" >> Tunnel-Type = 13, >> Tunnel-Medium-Type = 6, > > Or: Tunnel-Medium-Type = IEEE-802 >.... >> >> in both cases, it stays on "IDENTITY VALIDATION" in xp wireless management and sometime i receive the right ip adresss in the right IP Pool. ut lost it immediately, maybe cause of the repeating cycle of athentication sequence. >> AND, the client certificate, signed by the Server (not the CA root) is still with the same message. >> >> >> hope it would be helpfull !! > > Arg. Microsoft keeps putting magic nonsense into their OS's to make >it difficult to use non-Microsoft RADIUS servers. > > And yes, this *is* a problem even inside of Microsoft! So if you're >finding it a PITA to get it working, rest assured that Microsoft does, too. > > Alan DeKok. >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > >__________________________________________________ >Do You Yahoo!? >En finir avec le spam? Yahoo! Mail vous offre la meilleure protection possible contre les messages non sollicitĂŠs >http://mail.yahoo.fr Yahoo! Mail > >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html __________________________________________________ Do You Yahoo!? En finir avec le spam? Yahoo! Mail vous offre la meilleure protection possible contre les messages non sollicités http://mail.yahoo.fr Yahoo! Mail -----La pièce jointe correspondante suit----- ###################################################################### # # Create a new self-signed CA certificate # ###################################################################### cakey.key cacert.pem: openssl req -new -x509 -keyout cakey.pem -out cacert.pem -config ./ca.cnf ca.der: ca.pem openssl x509 -inform PEM -outform DER -in cac.pem -out ca.der ###################################################################### # requete de cerificat server openssl req -newkey rsa:1024 -keyout /etc/raddb/certs/CA/other_keys/servradiuskey.pem -out /etc/raddb/certs/CA/req/servradius_cert.req # Signature du certificat server openssl ca -out /etc/raddb/certs/CA/certs/serverradiuscert.pem -extensions xpserver_ext -extfile /etc/ssl/xpextensions -infiles /etc/raddb/certs/CA/req/servradius_cert.req =================================================================================== ====================================================================================================================================================================== # requete de cerificat client openssl req -new -nodes -keyout /etc/raddb/certs/CA/other_keys/joelkey.pem -out /etc/raddb/certs/CA/req/joel_cert.req # Signature du certificat client openssl ca -out /etc/raddb/certs/CA/certs/joel_cert.pem -extensions xpclient_ext -extfile /etc/ssl/xpextensions -infiles /etc/raddb/certs/CA/req/joel_cert.req # conversion du certificat client au format pkcs12 openssl pkcs12 -export -in CA/certs/joel_cert.pem -inkey CA/other_keys/joelkey.pem -out /etc/raddb/certs/CA/certs/joel_certs.p12 -clcerts __________________________________________________ Do You Yahoo!? En finir avec le spam? Yahoo! Mail vous offre la meilleure protection possible contre les messages non sollicités http://mail.yahoo.fr Yahoo! Mail

2 1

Turning on sql in accounting - 2 questions
by NPY 18 May '08

18 May '08

Hi, 1. In sites-available/default, I found that 'sql' logging only works in accounting only if I put it in front of 'unix' under the accounting section. Why? 2. Why am I getting 3 rows of data in table radacct for each session? -npy

2 5

Problem with CHAP, rlm_ldap, edir
by Lothar.Haeger＠steria-mummert.de 18 May '08

18 May '08

Hi all, I am trying to get freradius with edir to work. PAP is working already, but CHAP does some strange things... here's a trace Started freeradius 2.0.4 on SLES10SP1 by typing: "radiusd -X" hamburgauth01:~ # radiusd -X FreeRADIUS Version 2.0.4, for host i686-suse-linux-gnu, built on May 7 2008 at 21:45:01 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including configuration file /etc/raddb/snmp.conf including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/sql.conf including configuration file /etc/raddb/sql/mysql/dialup.conf including configuration file /etc/raddb/sql/mysql/counter.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/smc including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/radiusd/radiusd.pid" user = "radiusd" group = "radiusd" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no security { max_attributes = 200 reject_delay = 1 status_server = yes } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 10.110.0.0/16 { require_message_authenticator = no secret = "radiustest" shortname = "SMC_GS_LAN" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_check = "none" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm NULL { } realm DEFAULT { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = yes input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = yes } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_ldap Module: Instantiating ldap ldap { server = "hamburgauth01.hamburg.mummert.de" port = 389 password = "*******" identity = "cn=radiusadmin,o=admin" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = yes cacertfile = "/etc/raddb/certs/AUTH-TREE_CA.b64" require_cert = "demand" } basedn = "o=data" filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" password_attribute = "nspmPassword" auto_header = no access_attr = "dialupAccess" access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes edir_account_policy_check = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message conns: 0x81690c8 Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } main { snmp = no smux_password = "" snmp_write_access = no } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Ready to process requests. used ntradping to try to aithenticate with PAP - successfully. Note that the password used to bind to edir is "test345": rad_recv: Access-Request packet from host 10.110.9.60 port 57834, id=19, length=55 User-Name = "test user@realm" User-Password = "test345" +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: Looking up realm "realm" for User-Name = "test user@realm" rlm_realm: Found realm "DEFAULT" rlm_realm: Adding Stripped-User-Name = "test user" rlm_realm: Adding Realm = "DEFAULT" rlm_realm: Authentication realm is LOCAL. ++[suffix] returns noop rlm_ldap: - authorize rlm_ldap: performing user authorization for test user WARNING: Deprecated conditional expansion ":-". See "man unlang" for details expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=test user) expand: o=data -> o=data rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to hamburgauth01.hamburg.mummert.de:389, authentication 0 rlm_ldap: setting TLS CACert File to /etc/raddb/certs/AUTH-TREE_CA.b64 rlm_ldap: setting TLS Require Cert to demand rlm_ldap: starting TLS rlm_ldap: bind as cn=radiusadmin,o=admin/******** to hamburgauth01.hamburg.mummert.de:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in o=data, with filter (uid=test user) rlm_ldap: checking if remote access for test user is allowed by dialupAccess rlm_ldap: Added the eDirectory password test345 in check items as Cleartext-Password rlm_ldap: No default NMAS login sequence rlm_ldap: looking for check items in directory... rlm_ldap: LDAP attribute radiusAuthType as RADIUS attribute Auth-Type == LDAP rlm_ldap: looking for reply items in directory... rlm_ldap: LDAP attribute radiusServiceType as RADIUS attribute Service-Type = Login-User rlm_ldap: user test user authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok rlm_eap: No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type LDAP auth: type "LDAP" +- entering group LDAP rlm_ldap: - authenticate rlm_ldap: login attempt by "test user" with password "test345" rlm_ldap: user DN: cn=test user,ou=users,o=data rlm_ldap: (re)connect to hamburgauth01.hamburg.mummert.de:389, authentication 1 rlm_ldap: setting TLS CACert File to /etc/raddb/certs/AUTH-TREE_CA.b64 rlm_ldap: setting TLS Require Cert to demand rlm_ldap: starting TLS rlm_ldap: bind as cn=test user,ou=users,o=data/test345 to hamburgauth01.hamburg.mummert.de:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: user test user authenticated succesfully ++[ldap] returns ok Login OK: [test user@realm/test345] (from client SMC_GS_LAN port 0) +- entering group post-auth ++[ldap] returns noop ++[exec] returns noop Sending Access-Accept of id 19 to 10.110.9.60 port 57834 Service-Type = Login-User Finished request 0. Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 19 with timestamp +15 Ready to process requests. Now changed ntradping to use CHAP, everything else left as before, incl. the password: rad_recv: Access-Request packet from host 10.110.9.60 port 57851, id=20, length=56 User-Name = "test user@realm" CHAP-Password = 0x161b57b44ca4d299bb697e24be03e881a8 +- entering group authorize ++[preprocess] returns ok rlm_chap: Setting 'Auth-Type := CHAP' ++[chap] returns ok ++[mschap] returns noop rlm_realm: Looking up realm "realm" for User-Name = "test user@realm" rlm_realm: Found realm "DEFAULT" rlm_realm: Adding Stripped-User-Name = "test user" rlm_realm: Adding Realm = "DEFAULT" rlm_realm: Authentication realm is LOCAL. ++[suffix] returns noop rlm_ldap: - authorize rlm_ldap: performing user authorization for test user WARNING: Deprecated conditional expansion ":-". See "man unlang" for details expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=test user) expand: o=data -> o=data rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in o=data, with filter (uid=test user) rlm_ldap: checking if remote access for test user is allowed by dialupAccess rlm_ldap: Added the eDirectory password test345 in check items as Cleartext-Password rlm_ldap: No default NMAS login sequence rlm_ldap: looking for check items in directory... rlm_ldap: LDAP attribute radiusAuthType as RADIUS attribute Auth-Type == LDAP rlm_ldap: looking for reply items in directory... rlm_ldap: LDAP attribute radiusServiceType as RADIUS attribute Service-Type = Login-User rlm_ldap: user test user authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok rlm_eap: No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type LDAP auth: type "LDAP" +- entering group LDAP rlm_ldap: - authenticate rlm_ldap: Attribute "User-Password" is required for authentication. Cannot use "CHAP-Password". ++[ldap] returns invalid auth: Failed to validate the user. Login incorrect: [test user@realm/<CHAP-Password>] (from client SMC_GS_LAN port 0) Found Post-Auth-Type Reject +- entering group REJECT rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to hamburgauth01.hamburg.mummert.de:389, authentication 0 rlm_ldap: setting TLS CACert File to /etc/raddb/certs/AUTH-TREE_CA.b64 rlm_ldap: setting TLS Require Cert to demand rlm_ldap: starting TLS rlm_ldap: bind as cn=test user,ou=users,o=data/aest345 to hamburgauth01.hamburg.mummert.de:389 rlm_ldap: waiting for bind result ... rlm_ldap: LDAP login failed: check identity, password settings in ldap section of radiusd.conf rlm_ldap: eDirectory account policy check failed. rlm_ldap: NDS error: failed authentication (-669) rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns reject Delaying reject of request 1 for 1 seconds Going to the next request Sending delayed reject for request 1 Sending Access-Reject of id 20 to 10.110.9.60 port 57851 Service-Type = Login-User Reply-Message = "NDS error: failed authentication (-669)" Waking up in 2.9 seconds. Cleaning up request 1 ID 20 with timestamp +28 Ready to process requests. ldap bind fails because the password is now "aest345"!!! this happens to whatever password is typed in at the client: the first char os replaced with an "a", so auth always fails. Funnily, if i set the account's password to "abcd345" CHAP troes to authenticate with "bbcd345".... any ideas? Thanks, Lothar

2 1