- Freeradius-Users - lists.freeradius.org

Freeradius 3.x - CoA proxy and dynamic-client
by Alex 01 Sep '20

01 Sep '20

Hi everyone, I'm trying to solve a litte issue with my freeradius scenario. My scenario is like this Client ----- proxy (FR 3.x) ------ AAA (FR 3.x) |----------------- COA generator (Java) So, I have a proxy frontend with dynamc-clients virtualserver wich forwards the authentication and accounting requests to the backend via realm module. this is working like a charm. I would like to use also coa requests to the client. this requests are generated by a java software, then they should be proxied by the frontend and forwarded to the client. from my understanding the realm module needs a static client definition to proxy the coa requests, but this is not applicable to my scenario. so now I'm trying to find some kind of workaround, but i'm not able to find any documentation on known pattern on the documentation. is someone facing the same problem or had solved it in the past? thank you and best regards! Alex

2 3

Multiple Logins
by Aurélio de Souza Ribeiro Neto 01 Sep '20

01 Sep '20

Hello all, How can I assign an IP of a specific pool to clients trying to connect with multiple logins? Thanks

2 3

Re: Does Pam_Radius support Acct-Interim-Interval?
by Mark Antony 01 Sep '20

01 Sep '20

Hi Alan, Now I understand the limitations. I noticed that whenever I make a new connection, rather than inserting a new row in Radacct it is updating the existing entry. This makes the accounting useless. Unless I have somewhere a configuration mistake on my part, which I should investigate. I also noticed the servicetype shows as Authenticate-Only instead of Framed-User. But as you say I may need to look for something else to get full-featured accounting on the users activity. Thanks, Mark On Aug 4, 2020, at 6:30 AM, Mark Antony via Freeradius-Users < [freeradius-users at lists.freeradius.org](http://lists.freeradius.org/mailman/listinfo/freeradi… > wrote: > I have a question about Pam_Radius plugin and Freeradius. Does it only support authentication? It supports accounting, but it's not well documented or tested. > I'm asking because while authentication seem to work, Acct-Interim-Interval seem to be completely ignored. Yes. The module sends RADIUS packets when the PAM framework calls it. The module does NOT start up any new process or thread to periodically send packets. The PAM framework can call the module on open session, and close session. That's it. There is no "session still open" capability in PAM. If you want full-featured accounting on the users activity, interim updates, etc., then you will have to use something else. Both PAM and the standard Unix APIs don't support that. > post-auth { > update reply { > Acct-Interim-Interval = 10 > } > } > > For testing purposes I have set it to 10 seconds and I was expecting it to fire update-requests every 10 seconds, but this isn't happening. No RADIUS NAS on the planet will send accounting packets every 10 seconds. RFC 2866 suggests a 5 minute minimum on Acct-Interim-Interval. Most NASes enforce that. Alan DeKok.

2 1

Including vendor dictionary in config
by Oleg Olejek 31 Aug '20

31 Aug '20

OS: CentOS 7.8 freeradius - 3.0.13 (from centos repo) or 3.0.21 (built from sources) radiusd.conf - last line *$INCLUDE /usr/share/freeradius/dictionary* gives an error: *Expecting section start brace '{' after "ATTRIBUTE* *$INCLUDE /usr/local/ share/freeradius/dictionary.fortinet* gives an error: *Expecting section start brace '{' after "VENDOR Fortinet"* -- С уважением, Олежек Олег. Тел.:+380933964967 Skype: dizaar Best Regards, Oleg Olezhek. Phone: +380933964967 Skype: dizaar

3 8

RE: [EXT] Convert an integer to a MAC address in unlang / expr
by James Wood 27 Aug '20

27 Aug '20

Thanks Brian and Alan for your advice. If I just perform the mask transform on the last octet this works but of course it returns the result as an int, so I can't find any built in function to get that back to hex. This is what I've ended up with; please let me know if you feel there is a better/cleaner way without needing the IF statement update control { &Tmp-String-1 := "%{1}-%{2}-%{3}-%{4}-%{5}" &Tmp-String-2 := "%{expr: 0x%{6} & 0xC0}" } if (&control:Tmp-String-2 && &control:Tmp-String-2 != "") { if (&control:Tmp-String-2 == "00") { update control { &Tmp-String-2 := "00" } } if (&control:Tmp-String-2 == "64") { update control { &Tmp-String-2 := "40" } } if (&control:Tmp-String-2 == "128") { update control { &Tmp-String-2 := "80" } } if (&control:Tmp-String-2 == "192") { update control { &Tmp-String-2 := "C0" } } update request { &Called-Station-Id := "%{control:Tmp-String-1}-%{control:Tmp-String-2}" } } Thanks, James

3 2

ldap filter and cert-subject
by Sandmann, David 27 Aug '20

27 Aug '20

Hello, Is it possible to extract the uid from „TLS-Client-Cert-Subject := C=DE/../../UID=username“ in mods-enabled/ldap -> filters? thanks and best regards David Sandmann Universitätsrechenzentrum (URZ) Universität Greifswald Felix-Hausdorff-Str. 12 17489 Greifswald Germany Tel. +49 3834 420 1424 Fax. +49 3834 420 1401

2 3

reject request in post-proxy
by Matt Zagrabelny 26 Aug '20

26 Aug '20

Greetings, I am using FR 3.0.17. I am trying to use unlang in the post-proxy section of my default site to reject certain requests. The following config example is a test condition and contrived. post-proxy { eap if (User-Name == 'mzagrabe') { reject } } However, I am not getting the expected reject when I successfully authenticate. Here is the -X output: [...] (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "mzagrabe", looking up realm NULL (0) suffix: Found realm "NULL" (0) suffix: Adding Stripped-User-Name = "mzagrabe" (0) suffix: Adding Realm = "NULL" (0) suffix: Proxying request from user mzagrabe to realm NULL (0) suffix: Preparing to proxy authentication request to realm "NULL" (0) [suffix] = updated (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop (0) [expiration] = noop (0) [logintime] = noop (0) [pap] = noop (0) } # authorize = updated (0) Starting proxy to home server 10.0.0.1 port 1812 (0) Proxying request to home server 10.0.0.1 port 1812 timeout 30.000000 (0) Sent Access-Request Id 81 from 0.0.0.0:32865 to 10.0.0.1:1812 length 115 (0) User-Name = "mzagrabe" (0) User-Password = "I need something strong to distract my mind-2020" (0) NAS-IP-Address = 192.168.0.2 (0) Event-Timestamp = "Aug 24 2020 16:21:09 CDT" (0) Message-Authenticator := 0x00 (0) Proxy-State = 0x323330 Waking up in 0.3 seconds. (0) Expecting proxy response no later than 29.667028 seconds from now Waking up in 29.6 seconds. (0) Marking home server 10.0.0.1 port 1812 alive (0) Clearing existing &reply: attributes (0) Received Access-Accept Id 81 from 10.0.0.1:1812 to 192.168.0.1:32865 length 53 (0) Reply-Message = "Success. Logging you in..." (0) Proxy-State = 0x323330 (0) # Executing section post-proxy from file /etc/freeradius/3.0/sites-enabled/default (0) post-proxy { (0) eap: No pre-existing handler found (0) [eap] = noop (0) if (User-Name == 'mzagrabe') { (0) if (User-Name == 'mzagrabe') -> TRUE (0) if (User-Name == 'mzagrabe') { (0) [reject] = reject (0) } # if (User-Name == 'mzagrabe') = reject (0) } # post-proxy = reject (0) Found Auth-Type = Accept (0) Auth-Type = Accept, accepting the user (0) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (0) post-auth { (0) update { (0) No attributes updated (0) } # update = noop (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # post-auth = noop (0) Sent Access-Accept Id 230 from 192.168.0.1:1812 to 192.168.0.2:52859 length 0 (0) Reply-Message = "Success. Logging you in..." (0) Finished request How do I reject in post-proxy after the home server returns a successful authentication check? Thanks for any help! -m

2 9

Convert an integer to a MAC address in unlang / expr
by James Wood 26 Aug '20

26 Aug '20

Hello, FR 3.0.19 Quick one - I have some Aruba APs that are sending the BSSID in the Called-Station-Id attribute instead of the base radio MAC. I need to get back to the base radio MAC, so Aerohive has provided a mask we can apply to find out the base radio MAC from this BSSID. I am doing: if (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i) { update control { &Tmp-String-1 := "%{expr: 0x%{1}%{2}%{3}%{4}%{5}%{6} & 0xFFFFFFFFFFC0}" } } This works and the debug output shows &Tmp-String-1: EXPAND %{expr: 0x%{1}%{2}%{3}%{4}%{5}%{6} & 0xFFFFFFFFFFC0} --> 149928134221440 149928134221440 is correct so I need to base convert this integer back to a real MAC in a format like 88-5B-DD-2E-9E-80 or 885BDD2E9E80 instead of 149928134221440. Any thoughts? Thanks, James

3 2

No "known good" password found for the user.
by ROB HUGHES 26 Aug '20

26 Aug '20

Hi, I can auth against a RADIATOR setup when trying to ssh into a server, but when I try to change to auth against my freeRADIUS servers I get " No "known good" password found for the user. " TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap): Bind successful (414) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (414) pap: WARNING: Authentication will fail unless a "known good" password is available (414) # Executing group from file /etc/raddb/sites-enabled/default (414) ntlm_auth: Program executed successfully Regards Rob

2 1

PEAP with TLS authentication issues, Freeradius V 3.0.20
by Thomas Wagner 25 Aug '20

25 Aug '20

Hello We're in the process of setting up a FreeRadius Server version 3.0.20 on Ubuntu 20.04. We have to support client authentication via both PEAP and TTLS as outer encryption and MSCHAPV2 and TLS for inner encryption (only supplicants with wired connections for now). Now, in the current configuration TTLS works with MSCHAPV2 and TLS. PEAP works with MSCHAPV2 but not with TLS. The freeradius log (see below) states "Failed to authenticate the user" and "&Module-Failure-Message := &request:Module-Failure-Message -> 'eap: rlm_eap (EAP): No EAP session matching state 0x73ff912c72e19cba'". However, the certificates and user/password-settings are identical over all 4 combinations of PEAP/TTLS and MSCHAPV2/TLS for our current testing purposes. So the user authentication should (in theory) work, since PEAP works with MSCHAPV2 and TLS works with TTLS and they currently share users, passwords and certificates. Currently, we're out of ideas how to get PEAP with TLS working. So any help is appreciated! Best regards, Thomas --- freeradius -X Log: FreeRADIUS Version 3.0.20 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/mschap including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/control including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client switch_netgear { ipaddr = 192.168.60.108 require_message_authenticator = yes secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client switch_netgear_2 { ipaddr = 192.168.60.109 require_message_authenticator = yes secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client switch_netgear_8er { ipaddr = 192.168.60.100 require_message_authenticator = yes secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } instantiate { } # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/freeradius/3.0/certs/server.key" certificate_file = "/etc/freeradius/3.0/certs/server.pem" ca_file = "/etc/freeradius/3.0/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1200 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "1.2" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } The configuration allows TLS 1.0 and/or TLS 1.1. We STRONGLY recommned using only TLS 1.2 for security Please set: min_tls_version = "1.2" # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "tls" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "tls" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:340 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 36607 Listening on proxy address :: port 32824 Ready to process requests (0) Received Access-Request Id 25 from 192.168.60.109:48127 to 192.168.60.105:1812 length 142 (0) User-Name = "clientName" (0) Called-Station-Id = "bc-a5-11-9f-37-71" (0) Calling-Station-Id = "00:04:5f:70:fb:3b" (0) NAS-Identifier = "bc-a5-11-9f-37-6f" (0) NAS-Port = 17 (0) Framed-MTU = 1500 (0) NAS-Port-Type = Ethernet (0) EAP-Message = 0x0201000f01636c69656e744e616d65 (0) Message-Authenticator = 0xba20064780ab25a7c9433bcdab2ab12c (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "clientName", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 1 length 15 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_peap to process data (0) eap_peap: Initiating new TLS session (0) eap_peap: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 2 length 6 (0) eap: EAP session adding &reply:State = 0xcc71e94bcc73f0a7 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 25 from 192.168.60.105:1812 to 192.168.60.109:48127 length 0 (0) EAP-Message = 0x010200061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xcc71e94bcc73f0a70258287a4cac4284 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 26 from 192.168.60.109:48127 to 192.168.60.105:1812 length 345 (1) User-Name = "clientName" (1) Called-Station-Id = "bc-a5-11-9f-37-71" (1) Calling-Station-Id = "00:04:5f:70:fb:3b" (1) NAS-Identifier = "bc-a5-11-9f-37-6f" (1) NAS-Port = 17 (1) Framed-MTU = 1500 (1) NAS-Port-Type = Ethernet (1) State = 0xcc71e94bcc73f0a70258287a4cac4284 (1) EAP-Message = 0x020200c81980000000be16030100b9010000b50303854b12d82da7eb63b81bd9f8d46621cad51c7642daeb80e2d3bdb5a44c4181f2000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff01000054000b000403000102000a000c000a001d0017001e001900180016000000170000000d0030002e040305030603080708080809080a080b080408050806040105010601030302030301020103020202040205020602 (1) Message-Authenticator = 0x9ee93bb831ae738c794500652291f73d (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "clientName", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 2 length 200 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xcc71e94bcc73f0a7 (1) eap: Finished EAP session with state 0xcc71e94bcc73f0a7 (1) eap: Previous EAP request found for state 0xcc71e94bcc73f0a7, released from the list (1) eap: Peer sent packet with method EAP PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Continuing EAP-TLS (1) eap_peap: Peer indicated complete TLS record size will be 190 bytes (1) eap_peap: Got complete TLS record (190 bytes) (1) eap_peap: [eaptls verify] = length included (1) eap_peap: (other): before SSL initialization (1) eap_peap: TLS_accept: before SSL initialization (1) eap_peap: TLS_accept: before SSL initialization (1) eap_peap: <<< recv TLS 1.3 [length 00b9] (1) eap_peap: TLS_accept: SSLv3/TLS read client hello (1) eap_peap: >>> send TLS 1.2 [length 003d] (1) eap_peap: TLS_accept: SSLv3/TLS write server hello (1) eap_peap: >>> send TLS 1.2 [length 0ef1] (1) eap_peap: TLS_accept: SSLv3/TLS write certificate (1) eap_peap: >>> send TLS 1.2 [length 024d] (1) eap_peap: TLS_accept: SSLv3/TLS write key exchange (1) eap_peap: >>> send TLS 1.2 [length 0004] (1) eap_peap: TLS_accept: SSLv3/TLS write server done (1) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (1) eap_peap: TLS - In Handshake Phase (1) eap_peap: TLS - got 4499 bytes of data (1) eap_peap: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 3 length 1180 (1) eap: EAP session adding &reply:State = 0xcc71e94bcd72f0a7 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 26 from 192.168.60.105:1812 to 192.168.60.109:48127 length 0 (1) EAP-Message = 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 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xcc71e94bcd72f0a70258287a4cac4284 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 27 from 192.168.60.109:48127 to 192.168.60.105:1812 length 151 (2) User-Name = "clientName" (2) Called-Station-Id = "bc-a5-11-9f-37-71" (2) Calling-Station-Id = "00:04:5f:70:fb:3b" (2) NAS-Identifier = "bc-a5-11-9f-37-6f" (2) NAS-Port = 17 (2) Framed-MTU = 1500 (2) NAS-Port-Type = Ethernet (2) State = 0xcc71e94bcd72f0a70258287a4cac4284 (2) EAP-Message = 0x020300061900 (2) Message-Authenticator = 0x9fc6bce19bfc5333cd3dff1551b35a98 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "clientName", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 3 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xcc71e94bcd72f0a7 (2) eap: Finished EAP session with state 0xcc71e94bcd72f0a7 (2) eap: Previous EAP request found for state 0xcc71e94bcd72f0a7, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer ACKed our handshake fragment (2) eap_peap: [eaptls verify] = request (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 4 length 1176 (2) eap: EAP session adding &reply:State = 0xcc71e94bce75f0a7 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 27 from 192.168.60.105:1812 to 192.168.60.109:48127 length 0 (2) EAP-Message = 0x01040498194026cf40d2e9662a731ff01ed4f89a2355557547a181afa481ac3081a9310b3009060355040613024445310b3009060355040813025348311230100603550407130950696e6e6562657267311f301d060355040a131657656e7a656c2d456c656b74726f6e696b20476d624831143012060355040b130b456e747769636b6c756e67311830160603550403140f43415f5457615f32303230303831323128302606092a864886f70d0109011619696e666f4077656e7a656c2d656c656b74726f6e696b2e6465820900d0395115e19ec94430240603551d12041d301b8119696e666f4077656e7a656c2d656c656b74726f6e696b2e646530240603551d11041d301b8119696e666f4077656e7a656c2d656c656b74726f6e696b2e6465300d06092a864886f70d01010b05000382020100a5e49b738363a4942c9ae3a791e94a93dfdac03154a49bab478a734b4c560a58325b551ed72b0e9ce6aa9d75738432e36a709c4591a8d5869a08cd5aa7f5f759e0 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xcc71e94bce75f0a70258287a4cac4284 (2) Finished request Waking up in 4.8 seconds. (3) Received Access-Request Id 28 from 192.168.60.109:48127 to 192.168.60.105:1812 length 151 (3) User-Name = "clientName" (3) Called-Station-Id = "bc-a5-11-9f-37-71" (3) Calling-Station-Id = "00:04:5f:70:fb:3b" (3) NAS-Identifier = "bc-a5-11-9f-37-6f" (3) NAS-Port = 17 (3) Framed-MTU = 1500 (3) NAS-Port-Type = Ethernet (3) State = 0xcc71e94bce75f0a70258287a4cac4284 (3) EAP-Message = 0x020400061900 (3) Message-Authenticator = 0x98a67adee088212cd87cb7e2993a1516 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "clientName", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 4 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xcc71e94bce75f0a7 (3) eap: Finished EAP session with state 0xcc71e94bce75f0a7 (3) eap: Previous EAP request found for state 0xcc71e94bce75f0a7, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 5 length 1176 (3) eap: EAP session adding &reply:State = 0xcc71e94bcf74f0a7 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 28 from 192.168.60.105:1812 to 192.168.60.109:48127 length 0 (3) EAP-Message = 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 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xcc71e94bcf74f0a70258287a4cac4284 (3) Finished request Waking up in 4.8 seconds. (4) Received Access-Request Id 29 from 192.168.60.109:48127 to 192.168.60.105:1812 length 151 (4) User-Name = "clientName" (4) Called-Station-Id = "bc-a5-11-9f-37-71" (4) Calling-Station-Id = "00:04:5f:70:fb:3b" (4) NAS-Identifier = "bc-a5-11-9f-37-6f" (4) NAS-Port = 17 (4) Framed-MTU = 1500 (4) NAS-Port-Type = Ethernet (4) State = 0xcc71e94bcf74f0a70258287a4cac4284 (4) EAP-Message = 0x020500061900 (4) Message-Authenticator = 0xc4cb514b129ec5716b0ad32d009c9027 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "clientName", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 5 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xcc71e94bcf74f0a7 (4) eap: Finished EAP session with state 0xcc71e94bcf74f0a7 (4) eap: Previous EAP request found for state 0xcc71e94bcf74f0a7, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 6 length 995 (4) eap: EAP session adding &reply:State = 0xcc71e94bc877f0a7 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 29 from 192.168.60.105:1812 to 192.168.60.109:48127 length 0 (4) EAP-Message = 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 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xcc71e94bc877f0a70258287a4cac4284 (4) Finished request Waking up in 4.8 seconds. (5) Received Access-Request Id 30 from 192.168.60.109:48127 to 192.168.60.105:1812 length 281 (5) User-Name = "clientName" (5) Called-Station-Id = "bc-a5-11-9f-37-71" (5) Calling-Station-Id = "00:04:5f:70:fb:3b" (5) NAS-Identifier = "bc-a5-11-9f-37-6f" (5) NAS-Port = 17 (5) Framed-MTU = 1500 (5) NAS-Port-Type = Ethernet (5) State = 0xcc71e94bc877f0a70258287a4cac4284 (5) EAP-Message = 0x0206008819800000007e1603030046100000424104e5d7016dcac39c17e8e692b972b09ef47302540891980a44c1a7b98ee349ccd3e684143556827b442f7b158eac2b44d18282e2b58ed0fe3f4889eacf085ccd681403030001011603030028dc1b2399440e0b48ba713d7c02748c2e9e3a5126b2bc9d9c65ed8905d45161ceeac2746ce465083a (5) Message-Authenticator = 0x81529a5db8cb0e70c5fc97db14e84b9b (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "clientName", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 6 length 136 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xcc71e94bc877f0a7 (5) eap: Finished EAP session with state 0xcc71e94bc877f0a7 (5) eap: Previous EAP request found for state 0xcc71e94bc877f0a7, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 126 bytes (5) eap_peap: Got complete TLS record (126 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: TLS_accept: SSLv3/TLS write server done (5) eap_peap: <<< recv TLS 1.2 [length 0046] (5) eap_peap: TLS_accept: SSLv3/TLS read client key exchange (5) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec (5) eap_peap: <<< recv TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: SSLv3/TLS read finished (5) eap_peap: >>> send TLS 1.2 [length 0001] (5) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec (5) eap_peap: >>> send TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: SSLv3/TLS write finished (5) eap_peap: (other): SSL negotiation finished successfully (5) eap_peap: TLS - Connection Established (5) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) eap_peap: TLS-Session-Version = "TLS 1.2" (5) eap_peap: TLS - got 51 bytes of data (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 7 length 57 (5) eap: EAP session adding &reply:State = 0xcc71e94bc976f0a7 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) session-state: Saving cached attributes (5) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) TLS-Session-Version = "TLS 1.2" (5) Sent Access-Challenge Id 30 from 192.168.60.105:1812 to 192.168.60.109:48127 length 0 (5) EAP-Message = 0x01070039190014030300010116030300281dc2bfc76d4ab1a76c5ef63dfc5e5d766b5e2901488e8a7f874f45151b0e354decf063cf37352ee8 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xcc71e94bc976f0a70258287a4cac4284 (5) Finished request Waking up in 4.8 seconds. (6) Received Access-Request Id 31 from 192.168.60.109:48127 to 192.168.60.105:1812 length 151 (6) User-Name = "clientName" (6) Called-Station-Id = "bc-a5-11-9f-37-71" (6) Calling-Station-Id = "00:04:5f:70:fb:3b" (6) NAS-Identifier = "bc-a5-11-9f-37-6f" (6) NAS-Port = 17 (6) Framed-MTU = 1500 (6) NAS-Port-Type = Ethernet (6) State = 0xcc71e94bc976f0a70258287a4cac4284 (6) EAP-Message = 0x020700061900 (6) Message-Authenticator = 0x98bf9ecc33fbe02fa690d7ce3d0a3b48 (6) Restoring &session-state (6) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) &session-state:TLS-Session-Version = "TLS 1.2" (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "clientName", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 7 length 6 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xcc71e94bc976f0a7 (6) eap: Finished EAP session with state 0xcc71e94bc976f0a7 (6) eap: Previous EAP request found for state 0xcc71e94bc976f0a7, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer ACKed our handshake fragment. handshake is finished (6) eap_peap: [eaptls verify] = success (6) eap_peap: [eaptls process] = success (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state TUNNEL ESTABLISHED (6) eap: Sending EAP Request (code 1) ID 8 length 40 (6) eap: EAP session adding &reply:State = 0xcc71e94bca79f0a7 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) session-state: Saving cached attributes (6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) TLS-Session-Version = "TLS 1.2" (6) Sent Access-Challenge Id 31 from 192.168.60.105:1812 to 192.168.60.109:48127 length 0 (6) EAP-Message = 0x010800281900170303001d1dc2bfc76d4ab1a8997ec06e45bbd942a8ba096a5e2091eca5343d4ad6 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xcc71e94bca79f0a70258287a4cac4284 (6) Finished request Waking up in 4.8 seconds. (7) Received Access-Request Id 32 from 192.168.60.109:48127 to 192.168.60.105:1812 length 191 (7) User-Name = "clientName" (7) Called-Station-Id = "bc-a5-11-9f-37-71" (7) Calling-Station-Id = "00:04:5f:70:fb:3b" (7) NAS-Identifier = "bc-a5-11-9f-37-6f" (7) NAS-Port = 17 (7) Framed-MTU = 1500 (7) NAS-Port-Type = Ethernet (7) State = 0xcc71e94bca79f0a70258287a4cac4284 (7) EAP-Message = 0x0208002e19001703030023dc1b2399440e0b49b64ce5cad027d3984d760bf4748103130835185a0c7d354a15805d (7) Message-Authenticator = 0x45477e11647baa67e65d9663d3f0d300 (7) Restoring &session-state (7) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) &session-state:TLS-Session-Version = "TLS 1.2" (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "clientName", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 8 length 46 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xcc71e94bca79f0a7 (7) eap: Finished EAP session with state 0xcc71e94bca79f0a7 (7) eap: Previous EAP request found for state 0xcc71e94bca79f0a7, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state WAITING FOR INNER IDENTITY (7) eap_peap: Identity - clientName (7) eap_peap: Got inner identity 'clientName' (7) eap_peap: Setting default EAP type for tunneled EAP session (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x0208000f01636c69656e744e616d65 (7) eap_peap: Setting User-Name to clientName (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x0208000f01636c69656e744e616d65 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "clientName" (7) eap_peap: Called-Station-Id = "bc-a5-11-9f-37-71" (7) eap_peap: Calling-Station-Id = "00:04:5f:70:fb:3b" (7) eap_peap: NAS-Identifier = "bc-a5-11-9f-37-6f" (7) eap_peap: NAS-Port = 17 (7) eap_peap: Framed-MTU = 1500 (7) eap_peap: NAS-Port-Type = Ethernet (7) eap_peap: Event-Timestamp = "Aug 17 2020 16:14:32 CEST" (7) eap_peap: NAS-IP-Address = 192.168.60.109 (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x0208000f01636c69656e744e616d65 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "clientName" (7) Called-Station-Id = "bc-a5-11-9f-37-71" (7) Calling-Station-Id = "00:04:5f:70:fb:3b" (7) NAS-Identifier = "bc-a5-11-9f-37-6f" (7) NAS-Port = 17 (7) Framed-MTU = 1500 (7) NAS-Port-Type = Ethernet (7) Event-Timestamp = "Aug 17 2020 16:14:32 CEST" (7) NAS-IP-Address = 192.168.60.109 (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "clientName", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 8 length 15 (7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Peer sent packet with method EAP Identity (1) (7) eap: Calling submodule eap_tls to process data (7) eap_tls: Initiating new TLS session (7) eap_tls: Setting verify mode to require certificate from client (7) eap_tls: [eaptls start] = request (7) eap: Sending EAP Request (code 1) ID 9 length 6 (7) eap: EAP session adding &reply:State = 0x1059e5af1050e8ef (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) EAP-Message = 0x010900060d20 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x1059e5af1050e8ef02ecac11dd472c48 (7) eap_peap: Got tunneled reply code 11 (7) eap_peap: EAP-Message = 0x010900060d20 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x1059e5af1050e8ef02ecac11dd472c48 (7) eap_peap: Got tunneled reply RADIUS code 11 (7) eap_peap: EAP-Message = 0x010900060d20 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x1059e5af1050e8ef02ecac11dd472c48 (7) eap_peap: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 9 length 37 (7) eap: EAP session adding &reply:State = 0xcc71e94bcb78f0a7 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) session-state: Saving cached attributes (7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) TLS-Session-Version = "TLS 1.2" (7) Sent Access-Challenge Id 32 from 192.168.60.105:1812 to 192.168.60.109:48127 length 0 (7) EAP-Message = 0x010900251900170303001a1dc2bfc76d4ab1a972f783f47abfad9839ef3baf99358042fe95 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xcc71e94bcb78f0a70258287a4cac4284 (7) Finished request Waking up in 4.8 seconds. (8) Received Access-Request Id 33 from 192.168.60.109:48127 to 192.168.60.105:1812 length 372 (8) User-Name = "clientName" (8) Called-Station-Id = "bc-a5-11-9f-37-71" (8) Calling-Station-Id = "00:04:5f:70:fb:3b" (8) NAS-Identifier = "bc-a5-11-9f-37-6f" (8) NAS-Port = 17 (8) Framed-MTU = 1500 (8) NAS-Port-Type = Ethernet (8) State = 0xcc71e94bcb78f0a70258287a4cac4284 (8) EAP-Message = 0x020900e3190017030300d8dc1b2399440e0b4aa9595e77333738e452280c07b82c377e11aad80763fd06ac0456f4e5a0036c058ef1c18e5bd0384a88fff4973e867793f1bbf1e4e5253ae740ea8357a75f51b0c4d2648b853a6824c597f1f70317107055891680766a22772a49407c2c8c8701658aea732405883d3abb9623d56d98e7699dd7f2b418ce7fe70d3774ec6ed68947e0e7ef719af48167034f4838321298b430ec46c72eaa7f5095e7be03ec16e47d51cadd20b810bc7b88c2f820fb61e5e9dd5950d7b1ad075650e45356db443fc873a65ee2064fa763c0775abccef8ba (8) Message-Authenticator = 0x080895b90020840f9bfc3853c0d5b34a (8) Restoring &session-state (8) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8) &session-state:TLS-Session-Version = "TLS 1.2" (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "clientName", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 9 length 227 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x1059e5af1050e8ef (8) eap: Finished EAP session with state 0xcc71e94bcb78f0a7 (8) eap: Previous EAP request found for state 0xcc71e94bcb78f0a7, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method TLS (13) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x020900c40d0016030100b9010000b5030371a04ab3deb4996e2b63d2a2a1bdc4590eef9215c7974ae53b54b997ade402ab000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff01000054000b000403000102000a000c000a001d0017001e001900180016000000170000000d0030002e040305030603080708080809080a080b080408050806040105010601030302030301020103020202040205020602 (8) eap_peap: Setting User-Name to clientName (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x020900c40d0016030100b9010000b5030371a04ab3deb4996e2b63d2a2a1bdc4590eef9215c7974ae53b54b997ade402ab000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff01000054000b000403000102000a000c000a001d0017001e001900180016000000170000000d0030002e040305030603080708080809080a080b080408050806040105010601030302030301020103020202040205020602 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "clientName" (8) eap_peap: State = 0x1059e5af1050e8ef02ecac11dd472c48 (8) eap_peap: Called-Station-Id = "bc-a5-11-9f-37-71" (8) eap_peap: Calling-Station-Id = "00:04:5f:70:fb:3b" (8) eap_peap: NAS-Identifier = "bc-a5-11-9f-37-6f" (8) eap_peap: NAS-Port = 17 (8) eap_peap: Framed-MTU = 1500 (8) eap_peap: NAS-Port-Type = Ethernet (8) eap_peap: Event-Timestamp = "Aug 17 2020 16:14:32 CEST" (8) eap_peap: NAS-IP-Address = 192.168.60.109 (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x020900c40d0016030100b9010000b5030371a04ab3deb4996e2b63d2a2a1bdc4590eef9215c7974ae53b54b997ade402ab000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff01000054000b000403000102000a000c000a001d0017001e001900180016000000170000000d0030002e040305030603080708080809080a080b080408050806040105010601030302030301020103020202040205020602 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "clientName" (8) State = 0x1059e5af1050e8ef02ecac11dd472c48 (8) Called-Station-Id = "bc-a5-11-9f-37-71" (8) Calling-Station-Id = "00:04:5f:70:fb:3b" (8) NAS-Identifier = "bc-a5-11-9f-37-6f" (8) NAS-Port = 17 (8) Framed-MTU = 1500 (8) NAS-Port-Type = Ethernet (8) Event-Timestamp = "Aug 17 2020 16:14:32 CEST" (8) NAS-IP-Address = 192.168.60.109 (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "clientName", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 9 length 196 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) files: Failed resolving UID: No error (8) files: users: Matched entry clientName at line 15 (8) [files] = ok (8) [expiration] = noop (8) [logintime] = noop (8) pap: WARNING: Auth-Type already set. Not setting to PAP (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0x1059e5af1050e8ef (8) eap: Finished EAP session with state 0x1059e5af1050e8ef (8) eap: Previous EAP request found for state 0x1059e5af1050e8ef, released from the list (8) eap: Peer sent packet with method EAP TLS (13) (8) eap: Calling submodule eap_tls to process data (8) eap_tls: Continuing EAP-TLS (8) eap_tls: Got final TLS record fragment (190 bytes) (8) eap_tls: WARNING: Total received TLS record fragments (190 bytes), does not equal indicated TLS record length (0 bytes) (8) eap_tls: [eaptls verify] = ok (8) eap_tls: Done initial handshake (8) eap_tls: (other): before SSL initialization (8) eap_tls: TLS_accept: before SSL initialization (8) eap_tls: TLS_accept: before SSL initialization (8) eap_tls: <<< recv TLS 1.3 [length 00b9] (8) eap_tls: TLS_accept: SSLv3/TLS read client hello (8) eap_tls: >>> send TLS 1.2 [length 003d] (8) eap_tls: TLS_accept: SSLv3/TLS write server hello (8) eap_tls: >>> send TLS 1.2 [length 0ef1] (8) eap_tls: TLS_accept: SSLv3/TLS write certificate (8) eap_tls: >>> send TLS 1.2 [length 024d] (8) eap_tls: TLS_accept: SSLv3/TLS write key exchange (8) eap_tls: >>> send TLS 1.2 [length 0175] (8) eap_tls: TLS_accept: SSLv3/TLS write certificate request (8) eap_tls: >>> send TLS 1.2 [length 0004] (8) eap_tls: TLS_accept: SSLv3/TLS write server done (8) eap_tls: TLS_accept: Need to read more data: SSLv3/TLS write server done (8) eap_tls: TLS - In Handshake Phase (8) eap_tls: TLS - got 4877 bytes of data (8) eap_tls: [eaptls process] = handled (8) eap: Sending EAP Request (code 1) ID 10 length 1180 (8) eap: EAP session adding &reply:State = 0x1059e5af1153e8ef (8) [eap] = handled (8) } # authenticate = handled (8) } # server inner-tunnel (8) Virtual server sending reply (8) EAP-Message = 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 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x1059e5af1153e8ef02ecac11dd472c48 (8) eap_peap: Got tunneled reply code 11 (8) eap_peap: EAP-Message = 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 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: State = 0x1059e5af1153e8ef02ecac11dd472c48 (8) eap_peap: Got tunneled reply RADIUS code 11 (8) eap_peap: EAP-Message = 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 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: State = 0x1059e5af1153e8ef02ecac11dd472c48 (8) eap_peap: Got tunneled Access-Challenge (8) eap: Sending EAP Request (code 1) ID 10 length 1180 (8) eap: EAP session adding &reply:State = 0xcc71e94bc47bf0a7 (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) session-state: Saving cached attributes (8) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8) TLS-Session-Version = "TLS 1.2" (8) Sent Access-Challenge Id 33 from 192.168.60.105:1812 to 192.168.60.109:48127 length 0 (8) EAP-Message = 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 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0xcc71e94bc47bf0a70258287a4cac4284 (8) Finished request Waking up in 4.7 seconds. (9) Received Access-Request Id 34 from 192.168.60.109:48127 to 192.168.60.105:1812 length 151 (9) User-Name = "clientName" (9) Called-Station-Id = "bc-a5-11-9f-37-71" (9) Calling-Station-Id = "00:04:5f:70:fb:3b" (9) NAS-Identifier = "bc-a5-11-9f-37-6f" (9) NAS-Port = 17 (9) Framed-MTU = 1500 (9) NAS-Port-Type = Ethernet (9) State = 0xcc71e94bc47bf0a70258287a4cac4284 (9) EAP-Message = 0x020a00061900 (9) Message-Authenticator = 0x5fcd3792a1a341394a810a26067b62c3 (9) Restoring &session-state (9) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (9) &session-state:TLS-Session-Version = "TLS 1.2" (9) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "clientName", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 10 length 6 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x1059e5af1153e8ef (9) eap: Finished EAP session with state 0xcc71e94bc47bf0a7 (9) eap: Previous EAP request found for state 0xcc71e94bc47bf0a7, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: Peer ACKed our application data fragment (9) eap_peap: [eaptls verify] = request (9) eap_peap: [eaptls process] = handled (9) eap: Sending EAP Request (code 1) ID 11 length 41 (9) eap: EAP session adding &reply:State = 0xcc71e94bc57af0a7 (9) [eap] = handled (9) } # authenticate = handled (9) Using Post-Auth-Type Challenge (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) Challenge { ... } # empty sub-section is ignored (9) session-state: Saving cached attributes (9) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (9) TLS-Session-Version = "TLS 1.2" (9) Sent Access-Challenge Id 34 from 192.168.60.105:1812 to 192.168.60.109:48127 length 0 (9) EAP-Message = 0x010b00291900183322948ef61046aeaed3dafdb91ad860e500a4be9a6304ed4b3bb1f4882833a14233 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0xcc71e94bc57af0a70258287a4cac4284 (9) Finished request Waking up in 4.7 seconds. (10) Received Access-Request Id 35 from 192.168.60.109:48127 to 192.168.60.105:1812 length 182 (10) User-Name = "clientName" (10) Called-Station-Id = "bc-a5-11-9f-37-71" (10) Calling-Station-Id = "00:04:5f:70:fb:3b" (10) NAS-Identifier = "bc-a5-11-9f-37-6f" (10) NAS-Port = 17 (10) Framed-MTU = 1500 (10) NAS-Port-Type = Ethernet (10) State = 0xcc71e94bc57af0a70258287a4cac4284 (10) EAP-Message = 0x020b00251900170303001adc1b2399440e0b4b5e6dddb48e66a0090c6ed7aef01e4b6a60ea (10) Message-Authenticator = 0x16f651e36da62430f4847759122b0c85 (10) Restoring &session-state (10) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (10) &session-state:TLS-Session-Version = "TLS 1.2" (10) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "clientName", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) eap: Peer sent EAP Response (code 2) ID 11 length 37 (10) eap: Continuing tunnel setup (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = eap (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (10) authenticate { (10) eap: Expiring EAP session with state 0x1059e5af1153e8ef (10) eap: Finished EAP session with state 0xcc71e94bc57af0a7 (10) eap: Previous EAP request found for state 0xcc71e94bc57af0a7, released from the list (10) eap: Peer sent packet with method EAP PEAP (25) (10) eap: Calling submodule eap_peap to process data (10) eap_peap: Continuing EAP-TLS (10) eap_peap: [eaptls verify] = ok (10) eap_peap: Done initial handshake (10) eap_peap: [eaptls process] = ok (10) eap_peap: Session established. Decoding tunneled attributes (10) eap_peap: PEAP state phase2 (10) eap_peap: EAP method TLS (13) (10) eap_peap: Got tunneled request (10) eap_peap: EAP-Message = 0x020b00060d00 (10) eap_peap: Setting User-Name to clientName (10) eap_peap: Sending tunneled request to inner-tunnel (10) eap_peap: EAP-Message = 0x020b00060d00 (10) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (10) eap_peap: User-Name = "clientName" (10) eap_peap: State = 0x1059e5af1153e8ef02ecac11dd472c48 (10) eap_peap: Called-Station-Id = "bc-a5-11-9f-37-71" (10) eap_peap: Calling-Station-Id = "00:04:5f:70:fb:3b" (10) eap_peap: NAS-Identifier = "bc-a5-11-9f-37-6f" (10) eap_peap: NAS-Port = 17 (10) eap_peap: Framed-MTU = 1500 (10) eap_peap: NAS-Port-Type = Ethernet (10) eap_peap: Event-Timestamp = "Aug 17 2020 16:14:32 CEST" (10) eap_peap: NAS-IP-Address = 192.168.60.109 (10) Virtual server inner-tunnel received request (10) EAP-Message = 0x020b00060d00 (10) FreeRADIUS-Proxied-To = 127.0.0.1 (10) User-Name = "clientName" (10) State = 0x1059e5af1153e8ef02ecac11dd472c48 (10) Called-Station-Id = "bc-a5-11-9f-37-71" (10) Calling-Station-Id = "00:04:5f:70:fb:3b" (10) NAS-Identifier = "bc-a5-11-9f-37-6f" (10) NAS-Port = 17 (10) Framed-MTU = 1500 (10) NAS-Port-Type = Ethernet (10) Event-Timestamp = "Aug 17 2020 16:14:32 CEST" (10) NAS-IP-Address = 192.168.60.109 (10) WARNING: Outer and inner identities are the same. User privacy is compromised. (10) server inner-tunnel { (10) session-state: No cached attributes (10) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [chap] = noop (10) [mschap] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "clientName", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) update control { (10) &Proxy-To-Realm := LOCAL (10) } # update control = noop (10) eap: Peer sent EAP Response (code 2) ID 11 length 6 (10) eap: No EAP Start, assuming it's an on-going EAP conversation (10) [eap] = updated (10) files: Failed resolving UID: No error (10) files: users: Matched entry clientName at line 15 (10) [files] = ok (10) [expiration] = noop (10) [logintime] = noop (10) pap: WARNING: Auth-Type already set. Not setting to PAP (10) [pap] = noop (10) } # authorize = updated (10) Found Auth-Type = eap (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (10) authenticate { (10) eap: Expiring EAP session with state 0x1059e5af1153e8ef (10) eap: ERROR: rlm_eap (EAP): No EAP session matching state 0x1059e5af1153e8ef (10) eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request (10) eap: Failed in handler (10) [eap] = invalid (10) } # authenticate = invalid (10) Failed to authenticate the user (10) Using Post-Auth-Type Reject (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (10) Post-Auth-Type REJECT { (10) attr_filter.access_reject: EXPAND %{User-Name} (10) attr_filter.access_reject: --> clientName (10) attr_filter.access_reject: Matched entry DEFAULT at line 11 (10) [attr_filter.access_reject] = updated (10) update outer.session-state { (10) &Module-Failure-Message := &request:Module-Failure-Message -> 'eap: rlm_eap (EAP): No EAP session matching state 0x1059e5af1153e8ef' (10) } # update outer.session-state = noop (10) } # Post-Auth-Type REJECT = updated (10) Login incorrect (eap: rlm_eap (EAP): No EAP session matching state 0x1059e5af1153e8ef): [clientName/<via Auth-Type = eap>] (from client switch_netgear_2 port 17 cli 00:04:5f:70:fb:3b via TLS tunnel) (10) } # server inner-tunnel (10) Virtual server sending reply (10) eap_peap: Got tunneled reply code 3 (10) eap_peap: Got tunneled reply RADIUS code 3 (10) eap_peap: Tunneled authentication was rejected (10) eap_peap: FAILURE (10) eap: Sending EAP Request (code 1) ID 12 length 46 (10) eap: EAP session adding &reply:State = 0xcc71e94bc67df0a7 (10) [eap] = handled (10) } # authenticate = handled (10) Using Post-Auth-Type Challenge (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (10) Challenge { ... } # empty sub-section is ignored (10) session-state: Saving cached attributes (10) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (10) TLS-Session-Version = "TLS 1.2" (10) Module-Failure-Message := "eap: rlm_eap (EAP): No EAP session matching state 0x1059e5af1153e8ef" (10) Sent Access-Challenge Id 35 from 192.168.60.105:1812 to 192.168.60.109:48127 length 0 (10) EAP-Message = 0x010c002e190017030300231dc2bfc76d4ab1ab83aa2726f46711dbbbd6dc03b809729aa57efd32553c4e7dce8599 (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) State = 0xcc71e94bc67df0a70258287a4cac4284 (10) Finished request Waking up in 4.7 seconds. (11) Received Access-Request Id 36 from 192.168.60.109:48127 to 192.168.60.105:1812 length 191 (11) User-Name = "clientName" (11) Called-Station-Id = "bc-a5-11-9f-37-71" (11) Calling-Station-Id = "00:04:5f:70:fb:3b" (11) NAS-Identifier = "bc-a5-11-9f-37-6f" (11) NAS-Port = 17 (11) Framed-MTU = 1500 (11) NAS-Port-Type = Ethernet (11) State = 0xcc71e94bc67df0a70258287a4cac4284 (11) EAP-Message = 0x020c002e19001703030023dc1b2399440e0b4cb3faf66db93476d00aa6479af66ec5321f04dee29531d950dd658d (11) Message-Authenticator = 0x1b4c11ad1958cb99d92f023fe6ad2dd7 (11) Restoring &session-state (11) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (11) &session-state:TLS-Session-Version = "TLS 1.2" (11) &session-state:Module-Failure-Message := "eap: rlm_eap (EAP): No EAP session matching state 0x1059e5af1153e8ef" (11) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (11) authorize { (11) policy filter_username { (11) if (&User-Name) { (11) if (&User-Name) -> TRUE (11) if (&User-Name) { (11) if (&User-Name =~ / /) { (11) if (&User-Name =~ / /) -> FALSE (11) if (&User-Name =~ /@[^@]*@/ ) { (11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (11) if (&User-Name =~ /\.\./ ) { (11) if (&User-Name =~ /\.\./ ) -> FALSE (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (11) if (&User-Name =~ /\.$/) { (11) if (&User-Name =~ /\.$/) -> FALSE (11) if (&User-Name =~ /(a)\./) { (11) if (&User-Name =~ /(a)\./) -> FALSE (11) } # if (&User-Name) = notfound (11) } # policy filter_username = notfound (11) [preprocess] = ok (11) [chap] = noop (11) [mschap] = noop (11) [digest] = noop (11) suffix: Checking for suffix after "@" (11) suffix: No '@' in User-Name = "clientName", looking up realm NULL (11) suffix: No such realm "NULL" (11) [suffix] = noop (11) eap: Peer sent EAP Response (code 2) ID 12 length 46 (11) eap: Continuing tunnel setup (11) [eap] = ok (11) } # authorize = ok (11) Found Auth-Type = eap (11) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (11) authenticate { (11) eap: Expiring EAP session with state 0x1059e5af1153e8ef (11) eap: Finished EAP session with state 0xcc71e94bc67df0a7 (11) eap: Previous EAP request found for state 0xcc71e94bc67df0a7, released from the list (11) eap: Peer sent packet with method EAP PEAP (25) (11) eap: Calling submodule eap_peap to process data (11) eap_peap: Continuing EAP-TLS (11) eap_peap: [eaptls verify] = ok (11) eap_peap: Done initial handshake (11) eap_peap: [eaptls process] = ok (11) eap_peap: Session established. Decoding tunneled attributes (11) eap_peap: PEAP state send tlv failure (11) eap_peap: Received EAP-TLV response (11) eap_peap: ERROR: The users session was previously rejected: returning reject (again.) (11) eap_peap: This means you need to read the PREVIOUS messages in the debug output (11) eap_peap: to find out the reason why the user was rejected (11) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (11) eap_peap: what went wrong, and how to fix the problem (11) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (11) eap: Sending EAP Failure (code 4) ID 12 length 4 (11) eap: Failed in EAP select (11) [eap] = invalid (11) } # authenticate = invalid (11) Failed to authenticate the user (11) Using Post-Auth-Type Reject (11) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (11) Post-Auth-Type REJECT { (11) attr_filter.access_reject: EXPAND %{User-Name} (11) attr_filter.access_reject: --> clientName (11) attr_filter.access_reject: Matched entry DEFAULT at line 11 (11) [attr_filter.access_reject] = updated (11) [eap] = noop (11) policy remove_reply_message_if_eap { (11) if (&reply:EAP-Message && &reply:Reply-Message) { (11) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (11) else { (11) [noop] = noop (11) } # else = noop (11) } # policy remove_reply_message_if_eap = noop (11) } # Post-Auth-Type REJECT = updated (11) Login incorrect (eap_peap: The users session was previously rejected: returning reject (again.)): [clientName/<via Auth-Type = eap>] (from client switch_netgear_2 port 17 cli 00:04:5f:70:fb:3b) (11) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (11) Sending delayed response (11) Sent Access-Reject Id 36 from 192.168.60.105:1812 to 192.168.60.109:48127 length 44 (11) EAP-Message = 0x040c0004 (11) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.7 seconds. (0) Cleaning up request packet ID 25 with timestamp +17 (1) Cleaning up request packet ID 26 with timestamp +17 (2) Cleaning up request packet ID 27 with timestamp +17 (3) Cleaning up request packet ID 28 with timestamp +17 (4) Cleaning up request packet ID 29 with timestamp +17 (5) Cleaning up request packet ID 30 with timestamp +17 (6) Cleaning up request packet ID 31 with timestamp +17 (7) Cleaning up request packet ID 32 with timestamp +17 (8) Cleaning up request packet ID 33 with timestamp +17 (9) Cleaning up request packet ID 34 with timestamp +17 (10) Cleaning up request packet ID 35 with timestamp +17 (11) Cleaning up request packet ID 36 with timestamp +17 Ready to process requests

2 2