- Freeradius-Users - lists.freeradius.org

rpmbuld errors 2.0.1
by Andrew Long 28 Jan '08

28 Jan '08

Hello: I am trying to build the rpm for 2.0.1 on CentOS 5. The first oddity is that the source now comes as freeradius-server-2.0.1.tar.gz; starting the rpmbuild with $ rpmbuild -bb freeradius.spec yields an error that SOURCES/freeradius-2.0.1.tar.gz does not exist. I tried renaming freeradius-server-2.0.1.tar.gz to freeradius-2.0.1.tar.gz, and now the build starts, but it always ends with the following error: + STATUS=0 + '[' 0 -ne 0 ']' + cd freeradius-2.0.1 /var/tmp/rpm-tmp.71302: line 29: cd: freeradius-2.0.1: No such file or directory error: Bad exit status from /var/tmp/rpm-tmp.71302 (%prep) Here is the block from the rpm-tmp file: set -x umask 022 cd /home/along/rpmbuild/BUILD cd /home/along/rpmbuild/BUILD rm -rf freeradius-2.0.1 /bin/gzip -dc /home/along/rpmbuild/SOURCES/freeradius-2.0.1.tar.gz | tar -xvvf - STATUS=$? if [ $STATUS -ne 0 ]; then exit $STATUS fi cd freeradius-2.0.1 <----------------------------------------------LINE 29 [ `/usr/bin/id -u` = '0' ] && /bin/chown -Rhf root . [ `/usr/bin/id -u` = '0' ] && /bin/chgrp -Rhf root . /bin/chmod -Rf a+rX,u+w,g-w,o-w . I am not an expert with rpmbuild, so I apologize if this is a bit off-topic. I preceded the build with $ rpmbuild --clean freeradius.spec as I had previously build 1.1.7 on the same host. - Andrew

3 8

Re: Administering with MySQL DB
by Andy Smith 28 Jan '08

28 Jan '08

Hi, thanks, Ive looked at this and its a good guide to initial install but doesnt seem to provide any detailed info on how to administer the data in the tables. IE there is a sample of some data from a test system but this doesnt even mention the "NAS" table, how are other people administering their systems? thanks! Andy. > FreeRadius Wiki is a good starting point. SQL Howto

6 9

Re: Administering with MySQL DB
by Andy Smith 28 Jan '08

28 Jan '08

Hi All, thanks for the assistance from everyone on this. My prob was not even knowing which nas table field you were meant to put the IP address of the device in due to the naming standard. I've installed daloradius, which was very quick and easy to install on a system already configured for mysql, apache and php and I can add nas entries via the GUI and now see the correct formatting for adding others via SQL commands if I should need to. cheers Andy.

2 1

Fixed time "single use" logins? (mailing list submission)
by michalp 28 Jan '08

28 Jan '08

(I apologise for duplicates) Hi, Is it possible to configure a set of temporary accounts supporting the scenario, where a user gets login, allowing him to be authorised for a fixed amount of time? I mean here of a service, (wireless access) where one buys a $5 card for 1hr of access. No matter how many times he logins to the network, he is allowed until 1 hr from first login with this particular login/password. After 1 hr he will be disconnected... Thanks, Michal -- View this message in context: http://www.nabble.com/Fixed-time-%22single-use%22-logins--%28mailing-list-s… Sent from the FreeRadius - User mailing list archive at Nabble.com.

3 2

RE: Creating rpm problem
by Laurent RAYSSIGUIER 28 Jan '08

28 Jan '08

Hello, >You need to change the freeradius.spec file in the /redhat folder. The >spec points to a .tar.gz for the source, and it's now a .tar.bz2. Or, >you could unpack the tar and gzip it to create the required source >file. I'm looking for bz2 reference in spec file and I don't find it. The SOURCE is tar.gz >Also, I think you might need to change a bit more, as the folder >structure relates to freeradius-server, and the spec file details >freeradius. I try this, but it don't work. I'm not developer and I don't knox how to do this. Best regards Laurent

1 0

Large installations of freeradius
by Imri Zvik 28 Jan '08

28 Jan '08

Hi, In continue to my effort to convince our executives that FreeRadius is the right choice for us, I was asked to find out names of sites with more than 500,000 users (that uses FreeRadius of course :) ). Can anyone help me with that? --imriz

2 1

Upgrade error for LDAP in Freeradius2.0
by Gopinath Reddy N 28 Jan '08

28 Jan '08

Hi, We have upgraded our freeradius1.6 to 2.0 We are using active directory for LDAP server. We have not changed any data in AD. But when we upgrade and try to connect using valid user id..user is getting rejected. Please let me know if there any issues I need to take before ugprading to 2.0 Iam using same bind DN and other strings in 2.0. rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to 157.235.205.31:389, authentication 0 rlm_ldap: bind as cn=Administrator,cn=Users,dc=Crossfire,dc=symbol,dc=com/windows2003 to 157.235.205.31:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in cn=Users,dc=Crossfire,dc=symbol,dc=com, with filter (sAMAccountName=satish) rlm_ldap: ldap_release_conn: Release Id: 0 expand: (|(&(objectClass=group)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=group)(member=))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 ******************************************************* rlm_ldap: performing search in cn=Users,dc=Crossfire,dc=symbol,dc=com, with filter (&(cn=sales)(|(&(objectClass=group)(member=))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))) rlm_ldap: object not found or got ambiguous search result ******************************************************************************* rlm_ldap: ldap_release_conn: Release Id: 0 rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in CN=satish,CN=Users,DC=Crossfire,DC=symbol,DC=com, with filter (objectclass=*) rlm_ldap::ldap_groupcmp: ldap_get_values() failed rlm_ldap: ldap_release_conn: Release Id: 0 rlm_ldap: Entering ldap_groupcmp() expand: cn=Users,dc=Crossfire,dc=symbol,dc=com -> cn=Users,dc=Crossfire,dc=symbol,dc=com expand: (|(&(objectClass=group)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=group)(member=))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Users,dc=Crossfire,dc=symbol,dc=com, with filter (&(cn=sales)(|(&(objectClass=group)(member=))(&(objectClass=GroupOfUniqueNames)(uniquemember=)))) rlm_ldap: object not found or got ambiguous search result rlm_ldap: ldap_release_conn: Release Id: 0 rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in CN=satish,CN=Users,DC=Crossfire,DC=symbol,DC=com, with filter (objectclass=*) rlm_ldap::ldap_groupcmp: ldap_get_values() failed rlm_ldap: ldap_release_conn: Release Id: 0 users: Matched entry DEFAULT at line 26 ++[files] returns ok ++- entering policy redundant rlm_ldap: - authorize rlm_ldap: performing user authorization for satish expand: (sAMAccountName=%{User-Name}) -> (sAMAccountName=satish) expand: cn=Users,dc=Crossfire,dc=symbol,dc=com -> cn=Users,dc=Crossfire,dc=symbol,dc=com rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Users,dc=Crossfire,dc=symbol,dc=com, with filter (sAMAccountName=satish) rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... ****************************** WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? *************************************** rlm_ldap: user satish authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 +++[ldap_secondary] returns ok ++- policy redundant returns ok rlm_eap: EAP packet type response id 1 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type Reject rad_check_password: Auth-Type = Reject, rejecting user auth: Failed to validate the user. Login incorrect: [satish/<via Auth-Type = Reject>] (from client private-network-1 port 1 cli 00-16-CF-50-6C-8C) Thanks gnr

4 5

Question about unlang functionality
by Markus Moeller 27 Jan '08

27 Jan '08

I have a internal check Attribute My-Test defined as string. I have the following in authorize update reply { Reply-Message = " Hi " } switch control:My-Test { case "500" { update control { Auth-Type := Reject } update reply { Reply-Message = " Rejected " } } case { update control { Auth-Type := PAM } update reply { Reply-Message = " Accepted " } } Firstly I noticed that I can not update an attribute twice as I always get the reply message Hi. Secondly the switch case does not work but an if does if (control:My-Test == "500" ) { update control { Auth-Type := Reject } update reply { Reply-Message = " Rejected " } } else { update control { Auth-Type := PAM } update reply { Reply-Message = " Accepted " } } Is this a bug or wrong programming ? Thank you Markus

2 3

Creating rpm problem
by Laurent RAYSSIGUIER 27 Jan '08

27 Jan '08

Hello, I have a problem to create a rpm of freeradius-server-2.0.1. If i download tar.gz file and i try to create rpm, i've got this message : [root@ldap1 ~]# rpmbuild -ta freeradius-server-2.0.1.tar.gz error: File /root/freeradius-2.0.1.tar.gz: No such file or directory Scripts have freeradius-2.0.1 instead of freeradius-server. I don't knox how to correct this. I'm work on CentOS 5, so I try to download Fedora 8 srp.rpm which is the closer than my operating system. I can compile it but I had some errors when I install the resulting rpm files. - An error on eap when executing postinstall script - The /etc/init.d/freeradius file is an Suse Linux script and not a Redhat like script. I had corrected the script and freeradius works well because I don't use eap, but is there a solution to compile rpms from tar.gz correctly ? I don't find any solution on freeradius archive :-( Best regards Laurent

2 1

Commercial support
by Imri Zvik 27 Jan '08

27 Jan '08

Hi, We're considering implementing FreeRadius in our network. Our client base is approximately 1 million users. We would like to know if there are any companies who are willing to support FreeRadius commercially (including bug fixes, features development, and contracted SLA). I've checked the "Support" page, but I did not find any mentioning of the above. If you know someone who can provide us with such support, or if you offer such support your self, please contact me off-list. Thanks!

1 0