- Freeradius-Users - lists.freeradius.org

Troubleshooting "TLS failed during operation" with EAP-TLS
by Michael Parks 06 Jun '20

06 Jun '20

Greetings, I am attempting to authenticate iPhone clients using the built in IPSEC client with a username/password. Configuration is a MikroTik router hosting the VPN, using a separate FreeRADIUS server on Ubuntu 18.04 for AAA. The iPhone seems to require EAP-TLS for this configuration. I've set up the appropriate CA, certificate, and private key, and verified that these all match up using OpenSSL (same modulus on the cert and key, -verify shows that the cert can be verified up to the installed CA cert) My current configuration results in a "ERROR: TLS failed during operation" message, and an authentication failure, whenever iPhone clients try to log in. No further information as to the precise nature of the TLS failure appears to be visible in the debug output. Speaking of which, here it is. The only actions taken were starting freeradius and attempting to log in with the iPhone: --- FreeRADIUS Version 3.0.17 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/sql including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/canonicalization including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 3306 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } instantiate { } # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "sql" from file /etc/freeradius/3.0/mods-enabled/sql rlm_sql_mysql: libmysql version: 10.3.22 mysql { tls { } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-0+deb10u1, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-0+deb10u1, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-0+deb10u1, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-0+deb10u1, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-0+deb10u1, protocol version 10 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Adding client 192.168.88.1 (mikrotik) to global clients list rlm_sql (192.168.88.1): Client "mikrotik" (sql) added rlm_sql (sql): Adding client 127.0.0.1 (localhost) to global clients list rlm_sql (127.0.0.1): Client "localhost" (sql) added rlm_sql (sql): Released connection (0) Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-0+deb10u1, protocol version 10 # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/radius.key" certificate_file = "/etc/ssl/certs/radius.pem" ca_file = "/etc/ssl/certs/vpnca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 1812 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on proxy address * port 60649 Ready to process requests (0) Received Access-Request Id 147 from 192.168.88.1:51332 to 192.168.88.10:1812 length 131 (0) User-Name = "ios" (0) Called-Station-Id = "184.167.60.170" (0) Calling-Station-Id = "192.168.88.230" (0) NAS-Port-Id = "\000\000\000\r" (0) NAS-Port-Type = Virtual (0) Service-Type = Framed-User (0) Event-Timestamp = "Jun 4 2020 10:22:57 BST" (0) Framed-MTU = 1400 (0) EAP-Message = 0x0200000801696f73 (0) Message-Authenticator = 0x853108f4809b405a89e4927468437799 (0) NAS-Identifier = "MikroTik" (0) NAS-IP-Address = 192.168.88.1 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "ios", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 8 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 1 length 22 (0) eap: EAP session adding &reply:State = 0xf1152d4ff11429db (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 147 from 192.168.88.10:1812 to 192.168.88.1:51332 length 0 (0) EAP-Message = 0x010100160410fcb7fa95be6c8c9b365a2ae33e982c81 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xf1152d4ff11429db2580ab3ea34e373b (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 148 from 192.168.88.1:43544 to 192.168.88.10:1812 length 149 (1) User-Name = "ios" (1) Called-Station-Id = "184.167.60.170" (1) Calling-Station-Id = "192.168.88.230" (1) NAS-Port-Id = "\000\000\000\r" (1) NAS-Port-Type = Virtual (1) Service-Type = Framed-User (1) Event-Timestamp = "Jun 4 2020 10:22:57 BST" (1) Framed-MTU = 1400 (1) State = 0xf1152d4ff11429db2580ab3ea34e373b (1) EAP-Message = 0x0201000803191a0d (1) Message-Authenticator = 0x674f27faff2bbd09d70fe5f9bb499061 (1) NAS-Identifier = "MikroTik" (1) NAS-IP-Address = 192.168.88.1 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "ios", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 1 length 8 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop (1) sql: EXPAND %{User-Name} (1) sql: --> ios (1) sql: SQL-User-Name set to 'ios' rlm_sql (sql): Reserved connection (1) (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'ios' ORDER BY id (1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'ios' ORDER BY id (1) sql: User found in radcheck table (1) sql: Conditional check items matched, merging assignment check items (1) sql: Cleartext-Password := "bzGCJedi" (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'ios' ORDER BY id (1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'ios' ORDER BY id (1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (1) sql: --> SELECT groupname FROM radusergroup WHERE username = 'ios' ORDER BY priority (1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'ios' ORDER BY priority (1) sql: User not found in any groups rlm_sql (sql): Released connection (1) Need 4 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-0+deb10u1, protocol version 10 (1) [sql] = ok (1) [expiration] = noop (1) [logintime] = noop (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xf1152d4ff11429db (1) eap: Finished EAP session with state 0xf1152d4ff11429db (1) eap: Previous EAP request found for state 0xf1152d4ff11429db, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new EAP-TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 2 length 6 (1) eap: EAP session adding &reply:State = 0xf1152d4ff01734db (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 148 from 192.168.88.10:1812 to 192.168.88.1:43544 length 0 (1) EAP-Message = 0x010200061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xf1152d4ff01734db2580ab3ea34e373b (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 149 from 192.168.88.1:45700 to 192.168.88.10:1812 length 302 (2) User-Name = "ios" (2) Called-Station-Id = "184.167.60.170" (2) Calling-Station-Id = "192.168.88.230" (2) NAS-Port-Id = "\000\000\000\r" (2) NAS-Port-Type = Virtual (2) Service-Type = Framed-User (2) Event-Timestamp = "Jun 4 2020 10:22:57 BST" (2) Framed-MTU = 1400 (2) State = 0xf1152d4ff01734db2580ab3ea34e373b (2) EAP-Message = 0x020200a119800000009716030100920100008e03035ed9381f90c2ffd69116b1236a6149b732198ff30993234dd1a802f637b27df800002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00 (2) Message-Authenticator = 0xb5c1e5ca6863cd789c86662d361a0615 (2) NAS-Identifier = "MikroTik" (2) NAS-IP-Address = 192.168.88.1 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "ios", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 2 length 161 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xf1152d4ff01734db (2) eap: Finished EAP session with state 0xf1152d4ff01734db (2) eap: Previous EAP request found for state 0xf1152d4ff01734db, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 151 bytes (2) eap_peap: Got complete TLS record (151 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before SSL initialization (2) eap_peap: TLS_accept: before SSL initialization (2) eap_peap: TLS_accept: before SSL initialization (2) eap_peap: <<< recv UNKNOWN TLS VERSION ?0304? [length 0092] (2) eap_peap: TLS_accept: SSLv3/TLS read client hello (2) eap_peap: >>> send TLS 1.2 [length 003d] (2) eap_peap: TLS_accept: SSLv3/TLS write server hello (2) eap_peap: >>> send TLS 1.2 [length 089a] (2) eap_peap: TLS_accept: SSLv3/TLS write certificate (2) eap_peap: >>> send TLS 1.2 [length 014d] (2) eap_peap: TLS_accept: SSLv3/TLS write key exchange (2) eap_peap: >>> send TLS 1.2 [length 0004] (2) eap_peap: TLS_accept: SSLv3/TLS write server done (2) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (2) eap_peap: In SSL Handshake Phase (2) eap_peap: In SSL Accept mode (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 3 length 1004 (2) eap: EAP session adding &reply:State = 0xf1152d4ff31634db (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 149 from 192.168.88.10:1812 to 192.168.88.1:45700 length 0 (2) EAP-Message = 0x010303ec19c000000a3c160303003d020000390303a068d3c81aedb4c1acdf4198dbd61a918dd8451cbf65d353444f574e4752440100c030000011ff01000100000b00040300010200170000160303089a0b0008960008930004603082045c30820344a00302010202085b1117c0ff09d38b300d06092a (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xf1152d4ff31634db2580ab3ea34e373b (2) Finished request Waking up in 4.8 seconds. (3) Received Access-Request Id 150 from 192.168.88.1:54448 to 192.168.88.10:1812 length 147 (3) User-Name = "ios" (3) Called-Station-Id = "184.167.60.170" (3) Calling-Station-Id = "192.168.88.230" (3) NAS-Port-Id = "\000\000\000\r" (3) NAS-Port-Type = Virtual (3) Service-Type = Framed-User (3) Event-Timestamp = "Jun 4 2020 10:22:57 BST" (3) Framed-MTU = 1400 (3) State = 0xf1152d4ff31634db2580ab3ea34e373b (3) EAP-Message = 0x020300061900 (3) Message-Authenticator = 0x6d49c542853e58415a17517452a4fec2 (3) NAS-Identifier = "MikroTik" (3) NAS-IP-Address = 192.168.88.1 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "ios", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 3 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xf1152d4ff31634db (3) eap: Finished EAP session with state 0xf1152d4ff31634db (3) eap: Previous EAP request found for state 0xf1152d4ff31634db, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 4 length 1000 (3) eap: EAP session adding &reply:State = 0xf1152d4ff21134db (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 150 from 192.168.88.10:1812 to 192.168.88.1:54448 length 0 (3) EAP-Message = 0x010403e81940580120a85138bd5cc5e5baeacbcf3f587112291186e80d9261ed896170b5d1645a0b9fe653ab9ef4cd6e698cd1004ad9871fa7a41a4aee46c383fbf10bdcf38e9dbbec727aaefe4ab93b5181ad4e8cd2e9bd42236ffbf194baa05f3bd5ca13fac28171c65369db26e22d70fbb73a4108b1 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xf1152d4ff21134db2580ab3ea34e373b (3) Finished request Waking up in 4.7 seconds. (4) Received Access-Request Id 151 from 192.168.88.1:33463 to 192.168.88.10:1812 length 147 (4) User-Name = "ios" (4) Called-Station-Id = "184.167.60.170" (4) Calling-Station-Id = "192.168.88.230" (4) NAS-Port-Id = "\000\000\000\r" (4) NAS-Port-Type = Virtual (4) Service-Type = Framed-User (4) Event-Timestamp = "Jun 4 2020 10:22:57 BST" (4) Framed-MTU = 1400 (4) State = 0xf1152d4ff21134db2580ab3ea34e373b (4) EAP-Message = 0x020400061900 (4) Message-Authenticator = 0x33d8b12a37e758955e71d2a17fadee7e (4) NAS-Identifier = "MikroTik" (4) NAS-IP-Address = 192.168.88.1 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "ios", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 4 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xf1152d4ff21134db (4) eap: Finished EAP session with state 0xf1152d4ff21134db (4) eap: Previous EAP request found for state 0xf1152d4ff21134db, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 5 length 638 (4) eap: EAP session adding &reply:State = 0xf1152d4ff51034db (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 151 from 192.168.88.10:1812 to 192.168.88.1:33463 length 0 (4) EAP-Message = 0x0105027e190020526f757465724f53300d06092a864886f70d01010b0500038201010053685560db677ebae1bbce094f89ddc22d9d37f16507ef27a5b0e38e2a1c7d18bd79766532b1818aab418405b86951b298ff0f27095fb3f97ababdcdb9cac8a6fc1c99c4ceac61daf8a275f6bc4dbace767b1a7c (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xf1152d4ff51034db2580ab3ea34e373b (4) Finished request Waking up in 4.7 seconds. (5) Received Access-Request Id 152 from 192.168.88.1:58427 to 192.168.88.10:1812 length 158 (5) User-Name = "ios" (5) Called-Station-Id = "184.167.60.170" (5) Calling-Station-Id = "192.168.88.230" (5) NAS-Port-Id = "\000\000\000\r" (5) NAS-Port-Type = Virtual (5) Service-Type = Framed-User (5) Event-Timestamp = "Jun 4 2020 10:22:57 BST" (5) Framed-MTU = 1400 (5) State = 0xf1152d4ff51034db2580ab3ea34e373b (5) EAP-Message = 0x0205001119800000000715030300020100 (5) Message-Authenticator = 0x3a65e25e556b20f1ddc6d51302d4f0b3 (5) NAS-Identifier = "MikroTik" (5) NAS-IP-Address = 192.168.88.1 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "ios", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 5 length 17 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xf1152d4ff51034db (5) eap: Finished EAP session with state 0xf1152d4ff51034db (5) eap: Previous EAP request found for state 0xf1152d4ff51034db, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 7 bytes (5) eap_peap: Got complete TLS record (7 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: <<< recv TLS 1.2 [length 0002] (5) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (5) eap_peap: In SSL Handshake Phase (5) eap_peap: In SSL Accept mode (5) eap_peap: SSL Application Data (5) eap_peap: ERROR: TLS failed during operation (5) eap_peap: ERROR: [eaptls process] = fail (5) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (5) eap: Sending EAP Failure (code 4) ID 5 length 4 (5) eap: Failed in EAP select (5) [eap] = invalid (5) } # authenticate = invalid (5) Failed to authenticate the user (5) Using Post-Auth-Type Reject (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Post-Auth-Type REJECT { (5) sql: EXPAND .query (5) sql: --> .query (5) sql: Using query template 'query' rlm_sql (sql): Reserved connection (2) (5) sql: EXPAND %{User-Name} (5) sql: --> ios (5) sql: SQL-User-Name set to 'ios' (5) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (5) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'ios', '', 'Access-Reject', '2020-06-04 19:06:24') (5) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'ios', '', 'Access-Reject', '2020-06-04 19:06:24') (5) sql: SQL query returned: success (5) sql: 1 record(s) updated rlm_sql (sql): Released connection (2) Need 3 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (7), 1 of 25 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-0+deb10u1, protocol version 10 (5) [sql] = ok (5) attr_filter.access_reject: EXPAND %{User-Name} (5) attr_filter.access_reject: --> ios (5) attr_filter.access_reject: Matched entry DEFAULT at line 11 (5) [attr_filter.access_reject] = updated (5) [eap] = noop (5) policy remove_reply_message_if_eap { (5) if (&reply:EAP-Message && &reply:Reply-Message) { (5) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (5) else { (5) [noop] = noop (5) } # else = noop (5) } # policy remove_reply_message_if_eap = noop (5) } # Post-Auth-Type REJECT = updated (5) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (5) (5) Discarding duplicate request from client mikrotik port 58427 - ID: 152 due to delayed response (5) Sending delayed response (5) Sent Access-Reject Id 152 from 192.168.88.10:1812 to 192.168.88.1:58427 length 44 (5) EAP-Message = 0x04050004 (5) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.6 seconds. --- Any ideas what's happening here? Thanks, Mike

4 9

Set EAP Type based on Group?
by Pot Noodle 06 Jun '20

06 Jun '20

I currently have a few groups setup with users assigned to them and am steering the users to the correct VLAN by settings in the group. Is it also possible to set the EAP type that should be used on a per group basis?

2 3

Radius 3 EAP (PEAP) mschapv2 connection problem
by Anatoly Oreshkin 04 Jun '20

04 Jun '20

Hello, I was for several years successfully using Radius 2 with authentication types EAP (PEAP) mschapv2. Now I've upgraded to Radius 3 with the same authentication. >From laptop under MS Windows 10 I' trying to connect to WiFi network through Access Points (AP). After some time I've managed to connect wifi network. Then I've disconnected intentionally from network and attempted once more connect to network but this time failed to connect. Radius debug log is very big, so I provide extract from Radius debug log below. >From debug log I see that laptop is eventually authenticated through AP 192.168.14.241 but going through many unsuccessful steps. The line Login OK: [oreshkin] (from client 3com9150 port 0 cli 30-E3-7A-D5-61-F0) shows that. Why is it required so many steps to successfully connect ? Some errors in radius configuration ? Second attempt to connect after disconnection is failed. Why ? This time authentication is done through AP 192.168.14.247 FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/files including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/control including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no }including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/files including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/control including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/files including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/control including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 192.168.14.241 { ipaddr = 192.168.14.241 require_message_authenticator = no secret = <<< secret >>> shortname = "3com9150" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 192.168.14.247 { ipaddr = 192.168.14.247 require_message_authenticator = no secret = <<< secret >>> shortname = "3com9552" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_detail # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address }}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = yes require_strong = yes with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address }}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_exec # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } instantiate { } # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = no proxy_tunneled_request_as_eap = no virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:291 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 44420 Listening on proxy address :: port 36131 Ready to process requests .... (27) Received Access-Request Id 9 from 192.168.14.241:3074 to xx.xx.xx.xx:1812 length 159 (27) User-Name = "oreshkin" (27) NAS-IP-Address = 192.168.14.241 (27) NAS-Port = 0 (27) Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON" (27) Calling-Station-Id = "30-E3-7A-D5-61-F0" (27) Framed-MTU = 1400 (27) NAS-Port-Type = Wireless-802.11 (27) Connect-Info = "CONNECT 0Mbps 802.11" (27) EAP-Message = 0x0201000d016f726573686b696e (27) Message-Authenticator = 0x10afad72dec6e948c7598d93b080d695 (27) # Executing section authorize from file /etc/raddb/sites-enabled/default (27) authorize { (27) policy filter_username { (27) if (&User-Name) { (27) if (&User-Name) -> TRUE (27) if (&User-Name) { (27) if (&User-Name =~ / /) { (27) if (&User-Name =~ / /) -> FALSE (27) if (&User-Name =~ /@[^@]*@/ ) { (27) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (27) if (&User-Name =~ /\.\./ ) { (27) if (&User-Name =~ /\.\./ ) -> FALSE (27) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (27) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (27) if (&User-Name =~ /\.$/) { (27) if (&User-Name =~ /\.$/) -> FALSE (27) if (&User-Name =~ /(a)\./) { (27) if (&User-Name =~ /(a)\./) -> FALSE (27) } # if (&User-Name) = notfound (27) } # policy filter_username = notfound (27) [preprocess] = ok (27) [chap] = noop (27) [mschap] = noop (27) suffix: Checking for suffix after "@" (27) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (27) suffix: No such realm "NULL" (27) [suffix] = noop (27) ntdomain: Checking for prefix before "\" (27) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (27) ntdomain: No such realm "NULL" (27) [ntdomain] = noop (27) eap: Peer sent EAP Response (code 2) ID 1 length 13 (27) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (27) [eap] = ok (27) } # authorize = ok (27) Found Auth-Type = eap (27) # Executing group from file /etc/raddb/sites-enabled/default (27) authenticate { (27) eap: Peer sent packet with method EAP Identity (1) (27) eap: Calling submodule eap_peap to process data (27) eap_peap: Initiating new EAP-TLS session 27) eap_peap: [eaptls start] = request (27) eap: Sending EAP Request (code 1) ID 2 length 6 (27) eap: EAP session adding &reply:State = 0x2222bfcc2220a606 (27) [eap] = handled (27) } # authenticate = handled (27) Using Post-Auth-Type Challenge (27) # Executing group from file /etc/raddb/sites-enabled/default (27) Challenge { ... } # empty sub-section is ignored (27) Sent Access-Challenge Id 9 from xx.xx.xx.xx:1812 to 192.168.14.241:3074 length 0 (27) EAP-Message = 0x010200061920 (27) Message-Authenticator = 0x00000000000000000000000000000000 (27) State = 0x2222bfcc2220a60628942d36d3525ed7 (27) Finished request (28) Received Access-Request Id 10 from 192.168.14.241:3074 to xx.xx.xx.xx:1812 length 330 (28) User-Name = "oreshkin" (28) NAS-IP-Address = 192.168.14.241 (28) NAS-Port = 0 (28) Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON" (28) Calling-Station-Id = "30-E3-7A-D5-61-F0" (28) Framed-MTU = 1400 (28) NAS-Port-Type = Wireless-802.11 (28) Connect-Info = "CONNECT 0Mbps 802.11" (28) EAP-Message = 0x020200a619800000009c16030300970100009303035ed4e24d6ec1584f510f0866c1215851558a510205500495d8d13de5caee61ca00002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000040000500050100000000000a00080006001d (28) State = 0x2222bfcc2220a60628942d36d3525ed7 (28) Message-Authenticator = 0x6de97a654208715266eb91099cdb366a (28) session-state: No cached attributes (28) # Executing section authorize from file /etc/raddb/sites-enabled/default (28) authorize { (28) policy filter_username { (28) if (&User-Name) { (28) if (&User-Name) -> TRUE (28) if (&User-Name) { (28) if (&User-Name =~ / /) { (28) if (&User-Name =~ / /) -> FALSE (28) if (&User-Name =~ /@[^@]*@/ ) { (28) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (28) if (&User-Name =~ /\.\./ ) { (28) if (&User-Name =~ /\.\./ ) -> FALSE (28) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (28) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (28) if (&User-Name =~ /\.$/) { (28) if (&User-Name =~ /\.$/) -> FALSE (28) if (&User-Name =~ /(a)\./) { (28) if (&User-Name =~ /(a)\./) -> FALSE (28) } # if (&User-Name) = notfound (28) } # policy filter_username = notfound (28) [preprocess] = ok (28) [chap] = noop (28) [mschap] = noop (28) suffix: Checking for suffix after "@" (28) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (28) suffix: No such realm "NULL" (28) [suffix] = noop (28) ntdomain: Checking for prefix before "\" (28) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (28) ntdomain: No such realm "NULL" (28) [ntdomain] = noop (28) eap: Peer sent EAP Response (code 2) ID 2 length 166 (28) eap: Continuing tunnel setup (28) [eap] = ok (28) } # authorize = ok (28) Found Auth-Type = eap (28) # Executing group from file /etc/raddb/sites-enabled/default (28) authenticate { (28) eap: Expiring EAP session with state 0x2222bfcc2220a606 (28) eap: Finished EAP session with state 0x2222bfcc2220a606 (28) eap: Previous EAP request found for state 0x2222bfcc2220a606, released from the list (28) eap: Peer sent packet with method EAP PEAP (25) (28) eap: Calling submodule eap_peap to process data (28) eap_peap: Continuing EAP-TLS (28) eap_peap: Peer indicated complete TLS record size will be 156 bytes (28) eap_peap: Got complete TLS record (156 bytes) (28) eap_peap: [eaptls verify] = length included (28) eap_peap: (other): before/accept initialization (28) eap_peap: TLS_accept: before/accept initialization (28) eap_peap: <<< recv TLS 1.2 [length 0097] (28) eap_peap: TLS_accept: SSLv3 read client hello A (28) eap_peap: >>> send TLS 1.2 [length 0039] (28) eap_peap: TLS_accept: SSLv3 write server hello A (28) eap_peap: >>> send TLS 1.2 [length 08d3] (28) eap_peap: TLS_accept: SSLv3 write certificate A (28) eap_peap: >>> send TLS 1.2 [length 014d] (28) eap_peap: TLS_accept: SSLv3 write key exchange A (28) eap_peap: >>> send TLS 1.2 [length 0004] (28) eap_peap: TLS_accept: SSLv3 write server done A (28) eap_peap: TLS_accept: SSLv3 flush data (28) eap_peap: TLS_accept: SSLv3 read client certificate A (28) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (28) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (28) eap_peap: In SSL Handshake Phase (28) eap_peap: In SSL Accept mode (28) eap_peap: [eaptls process] = handled (28) eap: Sending EAP Request (code 1) ID 3 length 1004 (28) eap: EAP session adding &reply:State = 0x2222bfcc2321a606 (28) [eap] = handled (28) } # authenticate = handled (28) Using Post-Auth-Type Challenge (28) # Executing group from file /etc/raddb/sites-enabled/default (28) Challenge { ... } # empty sub-section is ignored (28) Sent Access-Challenge Id 10 from xx.xx.xx.xx:1812 to 192.168.14.241:3074 length 0 (28) EAP-Message = 0x010303ec19c000000a711603030039020000350303b8ccee05d9782beb17d6b77494dd7361478f4ed8ffecf71d49e93e03d5d4f67a00c03000000dff01000100000b00040300010216030308d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01010b050030 (28) Message-Authenticator = 0x00000000000000000000000000000000 (28) State = 0x2222bfcc2321a60628942d36d3525ed7 (28) Finished request (22) Cleaning up request packet ID 64 with timestamp +16 (23) Cleaning up request packet ID 65 with timestamp +16 (24) Cleaning up request packet ID 66 with timestamp +16 (25) Cleaning up request packet ID 67 with timestamp +16 (29) Received Access-Request Id 11 from 192.168.14.241:3074 to xx.xx.xx.xx:1812 length 170 (29) User-Name = "oreshkin" (29) NAS-IP-Address = 192.168.14.241 (29) NAS-Port = 0 (29) Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON" (29) Calling-Station-Id = "30-E3-7A-D5-61-F0" (29) Framed-MTU = 1400 (29) NAS-Port-Type = Wireless-802.11 (29) Connect-Info = "CONNECT 0Mbps 802.11" (29) EAP-Message = 0x020300061900 (29) State = 0x2222bfcc2321a60628942d36d3525ed7 (29) Message-Authenticator = 0xcebca6a1adb3df4e5aeddedcd23c1249 (29) session-state: No cached attributes (29) # Executing section authorize from file /etc/raddb/sites-enabled/default (29) authorize { (29) policy filter_username { (29) if (&User-Name) { (29) if (&User-Name) -> TRUE (29) if (&User-Name) { (29) if (&User-Name =~ / /) { (29) if (&User-Name =~ / /) -> FALSE (29) if (&User-Name =~ /@[^@]*@/ ) { (29) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (29) if (&User-Name =~ /\.\./ ) { (29) if (&User-Name =~ /\.\./ ) -> FALSE (29) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (29) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (29) if (&User-Name =~ /\.$/) { (29) if (&User-Name =~ /\.$/) -> FALSE (29) if (&User-Name =~ /(a)\./) { (29) if (&User-Name =~ /(a)\./) -> FALSE (29) } # if (&User-Name) = notfound (29) } # policy filter_username = notfound (29) [preprocess] = ok (29) [chap] = noop (29) [mschap] = noop (29) suffix: Checking for suffix after "@" (29) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (29) suffix: No such realm "NULL" (29) [suffix] = noop (29) ntdomain: Checking for prefix before "\" (29) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (29) ntdomain: No such realm "NULL" (29) [ntdomain] = noop (29) eap: Peer sent EAP Response (code 2) ID 3 length 6 (29) eap: Continuing tunnel setup (29) [eap] = ok (29) } # authorize = ok (29) Found Auth-Type = eap (29) # Executing group from file /etc/raddb/sites-enabled/default (29) authenticate { (29) eap: Expiring EAP session with state 0x2222bfcc2321a606 (29) eap: Finished EAP session with state 0x2222bfcc2321a606 (29) eap: Previous EAP request found for state 0x2222bfcc2321a606, released from the list (29) eap: Peer sent packet with method EAP PEAP (25) (29) eap: Calling submodule eap_peap to process data (29) eap_peap: Continuing EAP-TLS (29) eap_peap: Peer ACKed our handshake fragment (29) eap_peap: [eaptls verify] = request (29) eap_peap: [eaptls process] = handled (29) eap: Sending EAP Request (code 1) ID 4 length 1000 (29) eap: EAP session adding &reply:State = 0x2222bfcc2026a606 (29) [eap] = handled (29) } # authenticate = handled (29) Using Post-Auth-Type Challenge (29) # Executing group from file /etc/raddb/sites-enabled/default (29) Challenge { ... } # empty sub-section is ignored (29) Sent Access-Challenge Id 11 from xx.xx.xx.xx:1812 to 192.168.14.241:3074 length 0 (29) EAP-Message = 0x010403e81940f380d8c5155b8eb1fb79d0094a95a1908aa3d079dcf2dab14e3c12a2ab5494d1c2430b1e8c6de4b03899f1315c96304f66bb40bd632d817172ece81732a4256ffbf9df90317051de700004e8308204e4308203cca003020102020900d5c6e8bb4ac2077e300d06092a864886f70d01010b (29) Message-Authenticator = 0x00000000000000000000000000000000 (29) State = 0x2222bfcc2026a60628942d36d3525ed7 (29) Finished request (26) Cleaning up request packet ID 68 with timestamp +16 Waking up in 4.9 seconds. (30) Received Access-Request Id 12 from 192.168.14.241:3074 to xx.xx.xx.xx:1812 length 170 (30) User-Name = "oreshkin" (30) NAS-IP-Address = 192.168.14.241 (30) NAS-Port = 0 (30) Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON" (30) Calling-Station-Id = "30-E3-7A-D5-61-F0" (30) Framed-MTU = 1400 (30) NAS-Port-Type = Wireless-802.11 (30) Connect-Info = "CONNECT 0Mbps 802.11" (30) EAP-Message = 0x020400061900 (30) State = 0x2222bfcc2026a60628942d36d3525ed7 (30) Message-Authenticator = 0x8e292c39aebf1d998465743dfbcd6989 (30) session-state: No cached attributes (30) # Executing section authorize from file /etc/raddb/sites-enabled/default (30) authorize { (30) policy filter_username { (30) if (&User-Name) { (30) if (&User-Name) -> TRUE (30) if (&User-Name) { (30) if (&User-Name =~ / /) { (30) if (&User-Name =~ / /) -> FALSE (30) if (&User-Name =~ /@[^@]*@/ ) { (30) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (30) if (&User-Name =~ /\.\./ ) { (30) if (&User-Name =~ /\.\./ ) -> FALSE (30) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (30) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (30) if (&User-Name =~ /\.$/) { (30) if (&User-Name =~ /\.$/) -> FALSE (30) if (&User-Name =~ /(a)\./) { (30) if (&User-Name =~ /(a)\./) -> FALSE (30) } # if (&User-Name) = notfound (30) } # policy filter_username = notfound (30) [preprocess] = ok (30) [chap] = noop (30) [mschap] = noop (30) suffix: Checking for suffix after "@" (30) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (30) suffix: No such realm "NULL" (30) [suffix] = noop (30) ntdomain: Checking for prefix before "\" (30) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (30) ntdomain: No such realm "NULL" (30) [ntdomain] = noop (30) eap: Peer sent EAP Response (code 2) ID 4 length 6 (30) eap: Continuing tunnel setup (30) [eap] = ok (30) } # authorize = ok (30) Found Auth-Type = eap (30) # Executing group from file /etc/raddb/sites-enabled/default (30) authenticate { (30) eap: Expiring EAP session with state 0x2222bfcc2026a606 (30) eap: Finished EAP session with state 0x2222bfcc2026a606 (30) eap: Previous EAP request found for state 0x2222bfcc2026a606, released from the list (30) eap: Peer sent packet with method EAP PEAP (25) (30) eap: Calling submodule eap_peap to process data (30) eap_peap: Continuing EAP-TLS (30) eap_peap: Peer ACKed our handshake fragment (30) eap_peap: [eaptls verify] = request (30) eap_peap: [eaptls process] = handled (30) eap: Sending EAP Request (code 1) ID 5 length 691 (30) eap: EAP session adding &reply:State = 0x2222bfcc2127a606 (30) [eap] = handled (30) } # authenticate = handled (30) Using Post-Auth-Type Challenge (30) # Executing group from file /etc/raddb/sites-enabled/default (30) Challenge { ... } # empty sub-section is ignored (30) Sent Access-Challenge Id 12 from xx.xx.xx.xx:1812 to 192.168.14.241:3074 length 0 (30) EAP-Message = 0x010502b319000530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b050003820101007f15d37224ffa7b8db1d8ed23f49758db260c870aeedbcb0b706dfda4b208f (30) Message-Authenticator = 0x00000000000000000000000000000000 (30) State = 0x2222bfcc2127a60628942d36d3525ed7 (30) Finished request Waking up in 4.9 seconds. (31) Received Access-Request Id 13 from 192.168.14.241:3074 to xx.xx.xx.xx:1812 length 300 (31) User-Name = "oreshkin" (31) NAS-IP-Address = 192.168.14.241 (31) NAS-Port = 0 (31) Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON" (31) Calling-Station-Id = "30-E3-7A-D5-61-F0" (31) Framed-MTU = 1400 (31) NAS-Port-Type = Wireless-802.11 (31) Connect-Info = "CONNECT 0Mbps 802.11" (31) EAP-Message = 0x0205008819800000007e1603030046100000424104c0e14c73bf2789c0ac2c6de846eccfec4299866b1828da3ec76f49d47dae95a4fff5cdde5604d0e85e89c920b7c3683117977853940ed4d7395217f042fdd76c14030300010116030300280000000000000000065edd34aad7b3965d58aa1d763c75 (31) State = 0x2222bfcc2127a60628942d36d3525ed7 (31) Message-Authenticator = 0x04dff77641cddb023c91d4edab1e2f78 (31) session-state: No cached attributes (31) # Executing section authorize from file /etc/raddb/sites-enabled/default (31) authorize { (31) policy filter_username { (31) if (&User-Name) { (31) if (&User-Name) -> TRUE (31) if (&User-Name) { (31) if (&User-Name =~ / /) { (31) if (&User-Name =~ / /) -> FALSE (31) if (&User-Name =~ /@[^@]*@/ ) { (31) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (31) if (&User-Name =~ /\.\./ ) { (31) if (&User-Name =~ /\.\./ ) -> FALSE (31) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (31) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (31) if (&User-Name =~ /\.$/) { (31) if (&User-Name =~ /\.$/) -> FALSE (31) if (&User-Name =~ /(a)\./) { (31) if (&User-Name =~ /(a)\./) -> FALSE (31) } # if (&User-Name) = notfound (31) } # policy filter_username = notfound (31) [preprocess] = ok (31) [chap] = noop (31) [mschap] = noop (31) suffix: Checking for suffix after "@" (31) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (31) suffix: No such realm "NULL" (31) [suffix] = noop (31) ntdomain: Checking for prefix before "\" (31) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (31) ntdomain: No such realm "NULL" (31) [ntdomain] = noop (31) eap: Peer sent EAP Response (code 2) ID 5 length 136 (31) eap: Continuing tunnel setup (31) [eap] = ok (31) } # authorize = ok (31) Found Auth-Type = eap (31) # Executing group from file /etc/raddb/sites-enabled/default (31) authenticate { (31) eap: Expiring EAP session with state 0x2222bfcc2127a606 (31) eap: Finished EAP session with state 0x2222bfcc2127a606 (31) eap: Previous EAP request found for state 0x2222bfcc2127a606, released from the list (31) eap: Peer sent packet with method EAP PEAP (25) (31) eap: Calling submodule eap_peap to process data (31) eap_peap: Continuing EAP-TLS (31) eap_peap: Peer indicated complete TLS record size will be 126 bytes (31) eap_peap: Got complete TLS record (126 bytes) (31) eap_peap: [eaptls verify] = length included (31) eap_peap: <<< recv TLS 1.2 [length 0046] (31) eap_peap: TLS_accept: SSLv3 read client key exchange A (31) eap_peap: TLS_accept: SSLv3 read certificate verify A (31) eap_peap: <<< recv TLS 1.2 [length 0001] (31) eap_peap: <<< recv TLS 1.2 [length 0010] (31) eap_peap: TLS_accept: SSLv3 read finished A (31) eap_peap: >>> send TLS 1.2 [length 0001] (31) eap_peap: TLS_accept: SSLv3 write change cipher spec A (31) eap_peap: >>> send TLS 1.2 [length 0010] (31) eap_peap: TLS_accept: SSLv3 write finished A (31) eap_peap: TLS_accept: SSLv3 flush data (31) eap_peap: (other): SSL negotiation finished successfully (31) eap_peap: SSL Connection Established (31) eap_peap: [eaptls process] = handled (31) eap: Sending EAP Request (code 1) ID 6 length 57 (31) eap: EAP session adding &reply:State = 0x2222bfcc2624a606 (31) [eap] = handled (31) } # authenticate = handled (31) Using Post-Auth-Type Challenge (31) # Executing group from file /etc/raddb/sites-enabled/default (31) Challenge { ... } # empty sub-section is ignored (31) Sent Access-Challenge Id 13 from xx.xx.xx.xx:1812 to 192.168.14.241:3074 length 0 (31) EAP-Message = 0x01060039190014030300010116030300281feeee9e22725fa44b48439675c0566117c5e508aa3b8f83d39300efb57a13f459b0ca500d4285ce (31) Message-Authenticator = 0x00000000000000000000000000000000 (31) State = 0x2222bfcc2624a60628942d36d3525ed7 (31) Finished request Waking up in 4.9 seconds. (32) Received Access-Request Id 14 from 192.168.14.241:3074 to xx.xx.xx.xx:1812 length 170 (32) User-Name = "oreshkin" (32) NAS-IP-Address = 192.168.14.241 (32) NAS-Port = 0 (32) Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON" (32) Calling-Station-Id = "30-E3-7A-D5-61-F0" (32) Framed-MTU = 1400 (32) NAS-Port-Type = Wireless-802.11 (32) Connect-Info = "CONNECT 0Mbps 802.11" (32) EAP-Message = 0x020600061900 (32) State = 0x2222bfcc2624a60628942d36d3525ed7 (32) Message-Authenticator = 0x50d9a449b0125139aa7b9c77879e7e9e (32) session-state: No cached attributes (32) # Executing section authorize from file /etc/raddb/sites-enabled/default (32) authorize { (32) policy filter_username { (32) if (&User-Name) { (32) if (&User-Name) -> TRUE (32) if (&User-Name) { (32) if (&User-Name =~ / /) { (32) if (&User-Name =~ / /) -> FALSE (32) if (&User-Name =~ /@[^@]*@/ ) { (32) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (32) if (&User-Name =~ /\.\./ ) { (32) if (&User-Name =~ /\.\./ ) -> FALSE (32) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (32) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (32) if (&User-Name =~ /\.$/) { (32) if (&User-Name =~ /\.$/) -> FALSE (32) if (&User-Name =~ /(a)\./) { (32) if (&User-Name =~ /(a)\./) -> FALSE (32) } # if (&User-Name) = notfound (32) } # policy filter_username = notfound (32) [preprocess] = ok (32) [chap] = noop (32) [mschap] = noop (32) suffix: Checking for suffix after "@" (32) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (32) suffix: No such realm "NULL" (32) [suffix] = noop (32) ntdomain: Checking for prefix before "\" (32) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (32) ntdomain: No such realm "NULL" (32) [ntdomain] = noop (32) eap: Peer sent EAP Response (code 2) ID 6 length 6 (32) eap: Continuing tunnel setup (32) [eap] = ok (32) } # authorize = ok (32) Found Auth-Type = eap (32) # Executing group from file /etc/raddb/sites-enabled/default (32) authenticate { (32) eap: Expiring EAP session with state 0x2222bfcc2624a606 (32) eap: Finished EAP session with state 0x2222bfcc2624a606 (32) eap: Previous EAP request found for state 0x2222bfcc2624a606, released from the list (32) eap: Peer sent packet with method EAP PEAP (25) (32) eap: Calling submodule eap_peap to process data (32) eap_peap: Continuing EAP-TLS (32) eap_peap: Peer ACKed our handshake fragment. handshake is finished (32) eap_peap: [eaptls verify] = success (32) eap_peap: [eaptls process] = success (32) eap_peap: Session established. Decoding tunneled attributes (32) eap_peap: PEAP state TUNNEL ESTABLISHED (32) eap: Sending EAP Request (code 1) ID 7 length 40 (32) eap: EAP session adding &reply:State = 0x2222bfcc2725a606 (32) [eap] = handled (32) } # authenticate = handled (32) Using Post-Auth-Type Challenge (32) # Executing group from file /etc/raddb/sites-enabled/default (32) Challenge { ... } # empty sub-section is ignored (32) Sent Access-Challenge Id 14 from xx.xx.xx.xx:1812 to 192.168.14.241:3074 length 0 (32) EAP-Message = 0x010700281900170303001d1feeee9e22725fa54fe4e60beebfa029a12274227e8b2438d10345a5a5 (32) Message-Authenticator = 0x00000000000000000000000000000000 (32) State = 0x2222bfcc2725a60628942d36d3525ed7 (32) Finished request Waking up in 4.8 seconds. (33) Received Access-Request Id 15 from 192.168.14.241:3074 to xx.xx.xx.xx:1812 length 208 (33) User-Name = "oreshkin" (33) NAS-IP-Address = 192.168.14.241 (33) NAS-Port = 0 (33) Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON" (33) Calling-Station-Id = "30-E3-7A-D5-61-F0" (33) Framed-MTU = 1400 (33) NAS-Port-Type = Wireless-802.11 (33) Connect-Info = "CONNECT 0Mbps 802.11" (33) EAP-Message = 0x0207002c190017030300210000000000000001c43c8f6fdd9427eb6a99a7d0a165800d6370295331a09e3fbc (33) State = 0x2222bfcc2725a60628942d36d3525ed7 (33) Message-Authenticator = 0x1d17d29c090616db20f12d470ecee14b (33) session-state: No cached attributes (33) # Executing section authorize from file /etc/raddb/sites-enabled/default (33) authorize { (33) policy filter_username { (33) if (&User-Name) { (33) if (&User-Name) -> TRUE (33) if (&User-Name) { (33) if (&User-Name =~ / /) { (33) if (&User-Name =~ / /) -> FALSE (33) if (&User-Name =~ /@[^@]*@/ ) { (33) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (33) if (&User-Name =~ /\.\./ ) { (33) if (&User-Name =~ /\.\./ ) -> FALSE (33) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (33) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (33) if (&User-Name =~ /\.$/) { (33) if (&User-Name =~ /\.$/) -> FALSE (33) if (&User-Name =~ /(a)\./) { (33) if (&User-Name =~ /(a)\./) -> FALSE (33) } # if (&User-Name) = notfound (33) } # policy filter_username = notfound (33) [preprocess] = ok (33) [chap] = noop (33) [mschap] = noop (33) suffix: Checking for suffix after "@" (33) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (33) suffix: No such realm "NULL" (33) [suffix] = noop (33) ntdomain: Checking for prefix before "\" (33) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (33) ntdomain: No such realm "NULL" (33) [ntdomain] = noop (33) eap: Peer sent EAP Response (code 2) ID 7 length 44 (33) eap: Continuing tunnel setup (33) [eap] = ok (33) } # authorize = ok (33) Found Auth-Type = eap (33) # Executing group from file /etc/raddb/sites-enabled/default (33) authenticate { (33) eap: Expiring EAP session with state 0x2222bfcc2725a606 (33) eap: Finished EAP session with state 0x2222bfcc2725a606 (33) eap: Previous EAP request found for state 0x2222bfcc2725a606, released from the list (33) eap: Peer sent packet with method EAP PEAP (25) (33) eap: Calling submodule eap_peap to process data (33) eap_peap: Continuing EAP-TLS (33) eap_peap: [eaptls verify] = ok (33) eap_peap: Done initial handshake (33) eap_peap: [eaptls process] = ok (33) eap_peap: Session established. Decoding tunneled attributes (33) eap_peap: PEAP state WAITING FOR INNER IDENTITY (33) eap_peap: Identity - oreshkin (33) eap_peap: Got inner identity 'oreshkin' (33) eap_peap: Setting default EAP type for tunneled EAP session (33) eap_peap: Got tunneled request (33) eap_peap: EAP-Message = 0x0207000d016f726573686b696e (33) eap_peap: Setting User-Name to oreshkin (33) eap_peap: Sending tunneled request to inner-tunnel (33) eap_peap: EAP-Message = 0x0207000d016f726573686b696e (33) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (33) eap_peap: User-Name = "oreshkin" (33) eap_peap: NAS-IP-Address = 192.168.14.241 (33) eap_peap: NAS-Port = 0 (33) eap_peap: Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON" (33) eap_peap: Calling-Station-Id = "30-E3-7A-D5-61-F0" (33) eap_peap: Framed-MTU = 1400 (33) eap_peap: NAS-Port-Type = Wireless-802.11 (33) eap_peap: Connect-Info = "CONNECT 0Mbps 802.11" (33) eap_peap: Event-Timestamp = "Jun 1 2020 14:11:07 MSK" (33) Virtual server inner-tunnel received request (33) EAP-Message = 0x0207000d016f726573686b696e (33) FreeRADIUS-Proxied-To = 127.0.0.1 (33) User-Name = "oreshkin" (33) NAS-IP-Address = 192.168.14.241 (33) NAS-Port = 0 (33) Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON" (33) Calling-Station-Id = "30-E3-7A-D5-61-F0" (33) Framed-MTU = 1400 (33) NAS-Port-Type = Wireless-802.11 (33) Connect-Info = "CONNECT 0Mbps 802.11" (33) Event-Timestamp = "Jun 1 2020 14:11:07 MSK" (33) WARNING: Outer and inner identities are the same. User privacy is compromised. (33) server inner-tunnel { (33) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (33) authorize { (33) policy filter_username { (33) if (&User-Name) { (33) if (&User-Name) -> TRUE (33) if (&User-Name) { (33) if (&User-Name =~ / /) { (33) if (&User-Name =~ / /) -> FALSE (33) if (&User-Name =~ /@[^@]*@/ ) { (33) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (33) if (&User-Name =~ /\.\./ ) { (33) if (&User-Name =~ /\.\./ ) -> FALSE (33) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (33) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (33) if (&User-Name =~ /\.$/) { (33) if (&User-Name =~ /\.$/) -> FALSE (33) if (&User-Name =~ /(a)\./) { (33) if (&User-Name =~ /(a)\./) -> FALSE (33) } # if (&User-Name) = notfound (33) } # policy filter_username = notfound (33) [chap] = noop (33) [mschap] = noop (33) ntdomain: Checking for prefix before "\" (33) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (33) ntdomain: No such realm "NULL" (33) [ntdomain] = noop (33) update control { (33) &Proxy-To-Realm := LOCAL (33) } # update control = noop (33) eap: Peer sent EAP Response (code 2) ID 7 length 13 (33) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (33) [eap] = ok (33) } # authorize = ok (33) Found Auth-Type = eap (33) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (33) authenticate { (33) eap: Peer sent packet with method EAP Identity (1) (33) eap: Calling submodule eap_mschapv2 to process data (33) eap_mschapv2: Issuing Challenge (33) eap: Sending EAP Request (code 1) ID 8 length 43 (33) eap: EAP session adding &reply:State = 0x1dd632c31dde288d (33) [eap] = handled (33) } # authenticate = handled (33) } # server inner-tunnel (33) Virtual server sending reply (33) EAP-Message = 0x0108002b1a0108002610f22807a784c8ac25b4e82eb44c9eb3566672656572 332e302e3133 (33) Message-Authenticator = 0x00000000000000000000000000000000 (33) State = 0x1dd632c31dde288df7cfa5a922a8b8be (33) eap_peap: Got tunneled reply code 11 (33) eap_peap: EAP-Message = 0x0108002b1a0108002610f22807a784c8ac25b4e82eb44c9eb356667265657261646975732d332e302e3133 (33) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (33) eap_peap: State = 0x1dd632c31dde288df7cfa5a922a8b8be (33) eap_peap: Got tunneled reply RADIUS code 11 (33) eap_peap: EAP-Message = 0x0108002b1a0108002610f22807a784c8ac25b4e82eb44c9eb356667265657261646975732d332e302e3133 (33) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (33) eap_peap: State = 0x1dd632c31dde288df7cfa5a922a8b8be (33) eap_peap: Got tunneled Access-Challenge (33) eap: Sending EAP Request (code 1) ID 8 length 74 (33) eap: EAP session adding &reply:State = 0x2222bfcc242aa606 (33) [eap] = handled (33) } # authenticate = handled (33) Using Post-Auth-Type Challenge (33) # Executing group from file /etc/raddb/sites-enabled/default (33) Challenge { ... } # empty sub-section is ignored (33) Sent Access-Challenge Id 15 from xx.xx.xx.xx:1812 to 192.168.14.241:3074 length 0 (33) EAP-Message = 0x0108004a1900170303003f1feeee9e22725fa63f6dd2b2bc40fd535f0bd42e921aa6fd435dca53973ed33bedaf1cae5cad77d02d7d7ecedc5d194cc08380f9e4aba56fed70ec9e057a66 (33) Message-Authenticator = 0x00000000000000000000000000000000 (33) State = 0x2222bfcc242aa60628942d36d3525ed7 (33) Finished request Waking up in 4.8 seconds. (34) Received Access-Request Id 16 from 192.168.14.241:3074 to xx.xx.xx.xx:1812 length 262 (34) User-Name = "oreshkin" (34) NAS-IP-Address = 192.168.14.241 (34) NAS-Port = 0 (34) Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON" (34) Calling-Station-Id = "30-E3-7A-D5-61-F0" (34) Framed-MTU = 1400 (34) NAS-Port-Type = Wireless-802.11 (34) Connect-Info = "CONNECT 0Mbps 802.11" (34) EAP-Message = 0x02080062190017030300570000000000000002b1ca594d92465090474574968130029f19a0 05d703bc9c9809769f140e03f21c415269bc636a285507d431f357dce8a215e689e72cd5357a9289d97662c5261f77ff60aed4b95de307f84bf3a5b82f (34) State = 0x2222bfcc242aa60628942d36d3525ed7 (34) Message-Authenticator = 0xd9b738c8478c4b6c5149525e35e7d34c (34) session-state: No cached attributes (34) # Executing section authorize from file /etc/raddb/sites-enabled/default (34) authorize { (34) policy filter_username { (34) if (&User-Name) { (34) if (&User-Name) -> TRUE (34) if (&User-Name) { (34) if (&User-Name =~ / /) { (34) if (&User-Name =~ / /) -> FALSE (34) if (&User-Name =~ /@[^@]*@/ ) { (34) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (34) if (&User-Name =~ /\.\./ ) { (34) if (&User-Name =~ /\.\./ ) -> FALSE (34) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (34) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (34) if (&User-Name =~ /\.$/) { (34) if (&User-Name =~ /\.$/) -> FALSE (34) if (&User-Name =~ /(a)\./) { (34) if (&User-Name =~ /(a)\./) -> FALSE (34) } # if (&User-Name) = notfound (34) } # policy filter_username = notfound (34) [preprocess] = ok (34) [chap] = noop (34) [mschap] = noop (34) suffix: Checking for suffix after "@" (34) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (34) suffix: No such realm "NULL" (34) [suffix] = noop (34) ntdomain: Checking for prefix before "\" (34) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (34) ntdomain: No such realm "NULL" (34) [ntdomain] = noop (34) eap: Peer sent EAP Response (code 2) ID 8 length 98 (34) eap: Continuing tunnel setup (34) [eap] = ok (34) } # authorize = ok (34) Found Auth-Type = eap (34) # Executing group from file /etc/raddb/sites-enabled/default (34) authenticate { (34) eap: Expiring EAP session with state 0x1dd632c31dde288d (34) eap: Finished EAP session with state 0x2222bfcc242aa606 (34) eap: Previous EAP request found for state 0x2222bfcc242aa606, released from the list (34) eap: Peer sent packet with method EAP PEAP (25) (34) eap: Calling submodule eap_peap to process data (34) eap_peap: Continuing EAP-TLS (34) eap_peap: [eaptls verify] = ok (34) eap_peap: Done initial handshake (34) eap_peap: [eaptls process] = ok (34) eap_peap: Session established. Decoding tunneled attributes (34) eap_peap: PEAP state phase2 (34) eap_peap: EAP method MSCHAPv2 (26) (34) eap_peap: Got tunneled request (34) eap_peap: EAP-Message = 0x020800431a0208003e314a1eef1aefdbd4954a91ec2d440941c30000000000000000b897a0241bf2a36e9f466fde3363685b3e998796f98ef75e006f726573686b696e (34) eap_peap: Setting User-Name to oreshkin (34) eap_peap: Sending tunneled request to inner-tunnel (34) eap_peap: EAP-Message = 0x020800431a0208003e314a1eef1aefdbd4954a91ec2d440941c30000000000000000b897a0241bf2a36e9f466fde3363685b3e998796f98ef75e006f726573686b696e (34) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (34) eap_peap: User-Name = "oreshkin" (34) eap_peap: State = 0x1dd632c31dde288df7cfa5a922a8b8be (34) eap_peap: NAS-IP-Address = 192.168.14.241 (34) eap_peap: NAS-Port = 0 (34) eap_peap: Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON" (34) eap_peap: Calling-Station-Id = "30-E3-7A-D5-61-F0" (34) eap_peap: Framed-MTU = 1400 (34) eap_peap: NAS-Port-Type = Wireless-802.11 (34) eap_peap: Connect-Info = "CONNECT 0Mbps 802.11" (34) eap_peap: Event-Timestamp = "Jun 1 2020 14:11:07 MSK" (34) Virtual server inner-tunnel received request (34) EAP-Message = 0x020800431a0208003e314a1eef1aefdbd4954a91ec2d440941c30000000000000000b897a0241bf2a36e9f466fde3363685b3e998796f98ef75e006f726573686b696e (34) FreeRADIUS-Proxied-To = 127.0.0.1 (34) User-Name = "oreshkin" (34) State = 0x1dd632c31dde288df7cfa5a922a8b8be (34) NAS-IP-Address = 192.168.14.241 (34) NAS-Port = 0 (34) Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON" (34) Calling-Station-Id = "30-E3-7A-D5-61-F0" (34) Framed-MTU = 1400 (34) NAS-Port-Type = Wireless-802.11 (34) Connect-Info = "CONNECT 0Mbps 802.11" (34) Event-Timestamp = "Jun 1 2020 14:11:07 MSK" (34) WARNING: Outer and inner identities are the same. User privacy is compromised. (34) server inner-tunnel { (34) session-state: No cached attributes (34) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (34) authorize { (34) policy filter_username { (34) if (&User-Name) { (34) if (&User-Name) -> TRUE (34) if (&User-Name) { (34) if (&User-Name =~ / /) { (34) if (&User-Name =~ / /) -> FALSE (34) if (&User-Name =~ /@[^@]*@/ ) { (34) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (34) if (&User-Name =~ /\.\./ ) { (34) if (&User-Name =~ /\.\./ ) -> FALSE (34) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (34) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (34) if (&User-Name =~ /\.$/) { (34) if (&User-Name =~ /\.$/) -> FALSE (34) if (&User-Name =~ /(a)\./) { (34) if (&User-Name =~ /(a)\./) -> FALSE (34) } # if (&User-Name) = notfound (34) } # policy filter_username = notfound (34) [chap] = noop (34) [mschap] = noop (34) ntdomain: Checking for prefix before "\" (34) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (34) ntdomain: No such realm "NULL" (34) [ntdomain] = noop (34) update control { (34) &Proxy-To-Realm := LOCAL (34) } # update control = noop (34) eap: Peer sent EAP Response (code 2) ID 8 length 67 (34) eap: No EAP Start, assuming it's an on-going EAP conversation (34) [eap] = updated (34) files: users: Matched entry oreshkin at line 728 (34) [files] = ok (34) [expiration] = noop (34) [logintime] = noop (34) pap: WARNING: Auth-Type already set. Not setting to PAP (34) [pap] = noop (34) } # authorize = updated (34) Found Auth-Type = eap (34) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (34) authenticate { (34) eap: Expiring EAP session with state 0x1dd632c31dde288d (34) eap: Finished EAP session with state 0x1dd632c31dde288d (34) eap: Previous EAP request found for state 0x1dd632c31dde288d, released from the list (34) eap: Peer sent packet with method EAP MSCHAPv2 (26) (34) eap: Calling submodule eap_mschapv2 to process data (34) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (34) eap_mschapv2: authenticate { (34) mschap: Found Cleartext-Password, hashing to create NT-Password (34) mschap: Found Cleartext-Password, hashing to create LM-Password (34) mschap: Creating challenge hash with username: oreshkin (34) mschap: Client is using MS-CHAPv2 (34) mschap: Adding MS-CHAPv2 MPPE keys (34) [mschap] = ok (34) } # authenticate = ok (34) MSCHAP Success (34) eap: Sending EAP Request (code 1) ID 9 length 51 (34) eap: EAP session adding &reply:State = 0x1dd632c31cdf288d (34) [eap] = handled (34) } # authenticate = handled (34) } # server inner-tunnel (34) Virtual server sending reply (34) EAP-Message = 0x010900331a0308002e533d30324346323542454231343833353235394443363237323645464245363432323632363538384244 (34) Message-Authenticator = 0x00000000000000000000000000000000 (34) State = 0x1dd632c31cdf288df7cfa5a922a8b8be (34) eap_peap: Got tunneled reply code 11 (34) eap_peap: EAP-Message = 0x010900331a0308002e533d30324346323542454231343833353235394443363237323645464245363432323632363538384244 (34) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (34) eap_peap: State = 0x1dd632c31cdf288df7cfa5a922a8b8be (34) eap_peap: Got tunneled reply RADIUS code 11 (34) eap_peap: EAP-Message = 0x010900331a0308002e533d30324346323542454231343833353235394443363237323645464245363432323632363538384244 (34) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (34) eap_peap: State = 0x1dd632c31cdf288df7cfa5a922a8b8be (34) eap_peap: Got tunneled Access-Challenge (34) eap: Sending EAP Request (code 1) ID 9 length 82 (34) eap: EAP session adding &reply:State = 0x2222bfcc252ba606 (34) [eap] = handled (34) } # authenticate = handled (34) Using Post-Auth-Type Challenge (34) # Executing group from file /etc/raddb/sites-enabled/default (34) Challenge { ... } # empty sub-section is ignored (34) Sent Access-Challenge Id 16 from xx.xx.xx.xx:1812 to 192.168.14.241:3074 length 0 (34) EAP-Message = 0x01090052190017030300471feeee9e22725fa77d4a1988d4cffb328b87a72552c98ea6c33233bfd8b173580ac94dc3bd3b15708f84649e4230151e9ba7ae4d28a897165a23c186ec8169760eaa368f3dc609 (34) Message-Authenticator = 0x00000000000000000000000000000000 (34) State = 0x2222bfcc252ba60628942d36d3525ed7 (34) Finished request Waking up in 4.8 seconds. (35) Received Access-Request Id 17 from 192.168.14.241:3074 to xx.xx.xx.xx:1812 length 201 (35) User-Name = "oreshkin" (35) NAS-IP-Address = 192.168.14.241 (35) NAS-Port = 0 (35) Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON" (35) Calling-Station-Id = "30-E3-7A-D5-61-F0" (35) Framed-MTU = 1400 (35) NAS-Port-Type = Wireless-802.11 (35) Connect-Info = "CONNECT 0Mbps 802.11" (35) EAP-Message = 0x020900251900170303001a000000000000000308f965d693ae358a19765eea02daa8d034d7 (35) State = 0x2222bfcc252ba60628942d36d3525ed7 (35) Message-Authenticator = 0xe0581c5f414c920a96ec2b806d6a78b9 (35) session-state: No cached attributes (35) # Executing section authorize from file /etc/raddb/sites-enabled/default (35) authorize { (35) policy filter_username { (35) if (&User-Name) { (35) if (&User-Name) -> TRUE (35) if (&User-Name) { (35) if (&User-Name =~ / /) { (35) if (&User-Name =~ / /) -> FALSE (35) if (&User-Name =~ /@[^@]*@/ ) { (35) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (35) if (&User-Name =~ /\.\./ ) { (35) if (&User-Name =~ /\.\./ ) -> FALSE (35) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (35) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (35) if (&User-Name =~ /\.$/) { (35) if (&User-Name =~ /\.$/) -> FALSE (35) if (&User-Name =~ /(a)\./) { (35) if (&User-Name =~ /(a)\./) -> FALSE (35) } # if (&User-Name) = notfound (35) } # policy filter_username = notfound (35) [preprocess] = ok (35) [chap] = noop (35) [mschap] = noop (35) suffix: Checking for suffix after "@" (35) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (35) suffix: No such realm "NULL" (35) [suffix] = noop (35) ntdomain: Checking for prefix before "\" (35) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (35) ntdomain: No such realm "NULL" (35) [ntdomain] = noop (35) eap: Peer sent EAP Response (code 2) ID 9 length 37 (35) eap: Continuing tunnel setup (35) [eap] = ok (35) } # authorize = ok (35) Found Auth-Type = eap (35) # Executing group from file /etc/raddb/sites-enabled/default (35) authenticate { (35) eap: Expiring EAP session with state 0x1dd632c31cdf288d (35) eap: Finished EAP session with state 0x2222bfcc252ba606 (35) eap: Previous EAP request found for state 0x2222bfcc252ba606, released from the list (35) eap: Peer sent packet with method EAP PEAP (25) (35) eap: Calling submodule eap_peap to process data (35) eap_peap: Continuing EAP-TLS (35) eap_peap: [eaptls verify] = ok (35) eap_peap: Done initial handshake (35) eap_peap: [eaptls process] = ok (35) eap_peap: Session established. Decoding tunneled attributes (35) eap_peap: PEAP state phase2 (35) eap_peap: EAP method MSCHAPv2 (26) (35) eap_peap: Got tunneled request (35) eap_peap: EAP-Message = 0x020900061a03 (35) eap_peap: Setting User-Name to oreshkin (35) eap_peap: Sending tunneled request to inner-tunnel (35) eap_peap: EAP-Message = 0x020900061a03 (35) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (35) eap_peap: User-Name = "oreshkin" (35) eap_peap: State = 0x1dd632c31cdf288df7cfa5a922a8b8be (35) eap_peap: NAS-IP-Address = 192.168.14.241 (35) eap_peap: NAS-Port = 0 (35) eap_peap: Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON" (35) eap_peap: Calling-Station-Id = "30-E3-7A-D5-61-F0" (35) eap_peap: Framed-MTU = 1400 (35) eap_peap: NAS-Port-Type = Wireless-802.11 (35) eap_peap: Connect-Info = "CONNECT 0Mbps 802.11" (35) eap_peap: Event-Timestamp = "Jun 1 2020 14:11:07 MSK" (35) Virtual server inner-tunnel received request (35) EAP-Message = 0x020900061a03 (35) FreeRADIUS-Proxied-To = 127.0.0.1 (35) User-Name = "oreshkin" (35) State = 0x1dd632c31cdf288df7cfa5a922a8b8be (35) NAS-IP-Address = 192.168.14.241 (35) NAS-Port = 0 (35) Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON" (35) Calling-Station-Id = "30-E3-7A-D5-61-F0" (35) Framed-MTU = 1400 (35) NAS-Port-Type = Wireless-802.11 (35) Connect-Info = "CONNECT 0Mbps 802.11" (35) Event-Timestamp = "Jun 1 2020 14:11:07 MSK" (35) WARNING: Outer and inner identities are the same. User privacy is compromised. (35) server inner-tunnel { (35) session-state: No cached attributes (35) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (35) authorize { (35) policy filter_username { (35) if (&User-Name) { (35) if (&User-Name) -> TRUE (35) if (&User-Name) { (35) if (&User-Name =~ / /) { (35) if (&User-Name =~ / /) -> FALSE (35) if (&User-Name =~ /@[^@]*@/ ) { (35) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (35) if (&User-Name =~ /\.\./ ) { (35) if (&User-Name =~ /\.\./ ) -> FALSE (35) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (35) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (35) if (&User-Name =~ /\.$/) { (35) if (&User-Name =~ /\.$/) -> FALSE (35) if (&User-Name =~ /(a)\./) { (35) if (&User-Name =~ /(a)\./) -> FALSE (35) } # if (&User-Name) = notfound (35) } # policy filter_username = notfound (35) [chap] = noop (35) [mschap] = noop (35) ntdomain: Checking for prefix before "\" (35) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (35) ntdomain: No such realm "NULL" (35) [ntdomain] = noop (35) update control { (35) &Proxy-To-Realm := LOCAL (35) } # update control = noop (35) eap: Peer sent EAP Response (code 2) ID 9 length 6 (35) eap: No EAP Start, assuming it's an on-going EAP conversation (35) [eap] = updated (35) files: users: Matched entry oreshkin at line 728 (35) [files] = ok (35) [expiration] = noop (35) [logintime] = noop (35) pap: WARNING: Auth-Type already set. Not setting to PAP (35) [pap] = noop (35) } # authorize = updated (35) Found Auth-Type = eap (35) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (35) authenticate { (35) eap: Expiring EAP session with state 0x1dd632c31cdf288d (35) eap: Finished EAP session with state 0x1dd632c31cdf288d (35) eap: Previous EAP request found for state 0x1dd632c31cdf288d, released from the list (35) eap: Peer sent packet with method EAP MSCHAPv2 (26) (35) eap: Calling submodule eap_mschapv2 to process data (35) eap: Sending EAP Success (code 3) ID 9 length 4 (35) eap: Freeing handler (35) [eap] = ok (35) } # authenticate = ok (35) # Executing section post-auth from file /etc/raddb/sites-enabled/inner-tunnel (35) post-auth { (35) if (0) { (35) if (0) -> FALSE (35) } # post-auth = noop (35) Login OK: [oreshkin] (from client 3com9150 port 0 cli 30-E3-7A-D5-61-F0 via TLS tunnel) (35) } # server inner-tunnel (35) Virtual server sending reply (35) MS-MPPE-Encryption-Policy = Encryption-Required (35) MS-MPPE-Encryption-Types = 4 (35) MS-MPPE-Send-Key = 0x5da4080dbf52477047d2baf22acf65af (35) MS-MPPE-Recv-Key = 0x1b90fde298c73fa9e0de2b19567540cd (35) EAP-Message = 0x03090004 (35) Message-Authenticator = 0x00000000000000000000000000000000 (35) User-Name = "oreshkin" (35) eap_peap: Got tunneled reply code 2 (35) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Required (35) eap_peap: MS-MPPE-Encryption-Types = 4 (35) eap_peap: MS-MPPE-Send-Key = 0x5da4080dbf52477047d2baf22acf65af (35) eap_peap: MS-MPPE-Recv-Key = 0x1b90fde298c73fa9e0de2b19567540cd (35) eap_peap: EAP-Message = 0x03090004 (35) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (35) eap_peap: User-Name = "oreshkin" (35) eap_peap: Got tunneled reply RADIUS code 2 (35) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Required (35) eap_peap: MS-MPPE-Encryption-Types = 4 (35) eap_peap: MS-MPPE-Send-Key = 0x5da4080dbf52477047d2baf22acf65af (35) eap_peap: MS-MPPE-Recv-Key = 0x1b90fde298c73fa9e0de2b19567540cd (35) eap_peap: EAP-Message = 0x03090004 (35) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (35) eap_peap: User-Name = "oreshkin" (35) eap_peap: Tunneled authentication was successful (35) eap_peap: SUCCESS (35) eap: Sending EAP Request (code 1) ID 10 length 46 (35) eap: EAP session adding &reply:State = 0x2222bfcc2a28a606 (35) [eap] = handled (35) } # authenticate = handled (35) Using Post-Auth-Type Challenge (35) # Executing group from file /etc/raddb/sites-enabled/default (35) Challenge { ... } # empty sub-section is ignored (35) Sent Access-Challenge Id 17 from xx.xx.xx.xx:1812 to 192.168.14.241:3074 length 0 (35) EAP-Message = 0x010a002e190017030300231feeee9e22725fa86e26961d4d9425cb3d5690d742a77469436f5b5507676f8ac34619 (35) Message-Authenticator = 0x00000000000000000000000000000000 (35) State = 0x2222bfcc2a28a60628942d36d3525ed7 (35) Finished request Waking up in 4.8 seconds. (36) Received Access-Request Id 18 from 192.168.14.241:3074 to xx.xx.xx.xx:1812 length 210 (36) User-Name = "oreshkin" (36) NAS-IP-Address = 192.168.14.241 (36) NAS-Port = 0 (36) Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON" (36) Calling-Station-Id = "30-E3-7A-D5-61-F0" (36) Framed-MTU = 1400 (36) NAS-Port-Type = Wireless-802.11 (36) Connect-Info = "CONNECT 0Mbps 802.11" (36) EAP-Message = 0x020a002e1900170303002300000000000000040814eaddad977aba9b9a202a970c8539f80a70f481e31acc4b18a6 (36) State = 0x2222bfcc2a28a60628942d36d3525ed7 (36) Message-Authenticator = 0x426d48103bec1433b0a2ded9016bc666 (36) session-state: No cached attributes (36) # Executing section authorize from file /etc/raddb/sites-enabled/default (36) authorize { (36) policy filter_username { (36) if (&User-Name) { (36) if (&User-Name) -> TRUE (36) if (&User-Name) { (36) if (&User-Name =~ / /) { (36) if (&User-Name =~ / /) -> FALSE (36) if (&User-Name =~ /@[^@]*@/ ) { (36) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (36) if (&User-Name =~ /\.\./ ) { (36) if (&User-Name =~ /\.\./ ) -> FALSE (36) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (36) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (36) if (&User-Name =~ /\.$/) { (36) if (&User-Name =~ /\.$/) -> FALSE (36) if (&User-Name =~ /(a)\./) { (36) if (&User-Name =~ /(a)\./) -> FALSE (36) } # if (&User-Name) = notfound (36) } # policy filter_username = notfound (36) [preprocess] = ok (36) [chap] = noop (36) [mschap] = noop (36) suffix: Checking for suffix after "@" (36) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (36) suffix: No such realm "NULL" (36) [suffix] = noop (36) ntdomain: Checking for prefix before "\" (36) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (36) ntdomain: No such realm "NULL" (36) [ntdomain] = noop (36) eap: Peer sent EAP Response (code 2) ID 10 length 46 (36) eap: Continuing tunnel setup (36) [eap] = ok (36) } # authorize = ok (36) Found Auth-Type = eap (36) # Executing group from file /etc/raddb/sites-enabled/default (36) authenticate { (36) eap: Expiring EAP session with state 0x2222bfcc2a28a606 (36) eap: Finished EAP session with state 0x2222bfcc2a28a606 (36) eap: Previous EAP request found for state 0x2222bfcc2a28a606, released from the list (36) eap: Peer sent packet with method EAP PEAP (25) (36) eap: Calling submodule eap_peap to process data (36) eap_peap: Continuing EAP-TLS (36) eap_peap: [eaptls verify] = ok (36) eap_peap: Done initial handshake (36) eap_peap: [eaptls process] = ok (36) eap_peap: Session established. Decoding tunneled attributes (36) eap_peap: PEAP state send tlv success (36) eap_peap: Received EAP-TLV response (36) eap_peap: Success (36) eap: Sending EAP Success (code 3) ID 10 length 4 (36) eap: Freeing handler (36) [eap] = ok (36) } # authenticate = ok (36) # Executing section post-auth from file /etc/raddb/sites-enabled/default (36) post-auth { (36) update { (36) No attributes updated (36) } # update = noop (36) [exec] = noop (36) policy remove_reply_message_if_eap { (36) if (&reply:EAP-Message && &reply:Reply-Message) { (36) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (36) else { (36) [noop] = noop (36) } # else = noop (36) } # policy remove_reply_message_if_eap = noop (36) } # post-auth = noop (36) Login OK: [oreshkin] (from client 3com9150 port 0 cli 30-E3-7A-D5-61-F0) (36) Sent Access-Accept Id 18 from xx.xx.xx.xx:1812 to 192.168.14.241:3074 length 0 (36) MS-MPPE-Recv-Key = 0x9dff8ef64bae409f37046dbfa31ac19b59eef04d273cf316c153c61440c1e5a0 (36) MS-MPPE-Send-Key = 0x1ba4f3026a65b2b07900c7c9864c64fbff479b43710b12a2045e764f16a80bc5 (36) EAP-Message = 0x030a0004 (36) Message-Authenticator = 0x00000000000000000000000000000000 (36) User-Name = "oreshkin" (36) Finished request Waking up in 4.8 seconds. (27) Cleaning up request packet ID 9 with timestamp +21 (28) Cleaning up request packet ID 10 with timestamp +21 (29) Cleaning up request packet ID 11 with timestamp +21 (30) Cleaning up request packet ID 12 with timestamp +21 (31) Cleaning up request packet ID 13 with timestamp +21 (32) Cleaning up request packet ID 14 with timestamp +21 (33) Cleaning up request packet ID 15 with timestamp +21 (34) Cleaning up request packet ID 16 with timestamp +21 (35) Cleaning up request packet ID 17 with timestamp +21 (36) Cleaning up request packet ID 18 with timestamp +21 Ready to process requests .... (56) Received Access-Request Id 78 from 192.168.14.247:1024 to xx.xx.xx.xx:1812 length 186 (56) User-Name = "oreshkin" (56) Framed-MTU = 1450 (56) EAP-Message = 0x0201000d016f726573686b696e (56) Message-Authenticator = 0x7cbcab08900176179f29dcfba6367524 (56) NAS-IP-Address = 192.168.14.247 (56) NAS-Identifier = "3Com AP9552 Dual Band 802.11n" (56) NAS-Port = 16912385 (56) NAS-Port-Type = Wireless-802.11 (56) Service-Type = Framed-User (56) Framed-Protocol = PPP (56) Called-Station-Id = "40-01-C6-12-9A-50:HEPD-COMMON" (56) Framed-IP-Address = 10.2.0.118 (56) # Executing section authorize from file /etc/raddb/sites-enabled/default (56) authorize { (56) policy filter_username { (56) if (&User-Name) { (56) if (&User-Name) -> TRUE (56) if (&User-Name) { (56) if (&User-Name =~ / /) { (56) if (&User-Name =~ / /) -> FALSE (56) if (&User-Name =~ /@[^@]*@/ ) { (56) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (56) if (&User-Name =~ /\.\./ ) { (56) if (&User-Name =~ /\.\./ ) -> FALSE (56) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (56) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (56) if (&User-Name =~ /\.$/) { (56) if (&User-Name =~ /\.$/) -> FALSE (56) if (&User-Name =~ /(a)\./) { (56) if (&User-Name =~ /(a)\./) -> FALSE (56) } # if (&User-Name) = notfound (56) } # policy filter_username = notfound (56) [preprocess] = ok (56) [chap] = noop (56) [mschap] = noop (56) suffix: Checking for suffix after "@" (56) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (56) suffix: No such realm "NULL" (56) [suffix] = noop (56) ntdomain: Checking for prefix before "\" (56) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (56) ntdomain: No such realm "NULL" (56) [ntdomain] = noop (56) eap: Peer sent EAP Response (code 2) ID 1 length 13 (56) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (56) [eap] = ok (56) } # authorize = ok (56) Found Auth-Type = eap (56) # Executing group from file /etc/raddb/sites-enabled/default (56) authenticate { (56) eap: Peer sent packet with method EAP Identity (1) (56) eap: Calling submodule eap_peap to process data (56) eap_peap: Initiating new EAP-TLS session (56) eap_peap: [eaptls start] = request (56) eap: Sending EAP Request (code 1) ID 2 length 6 (56) eap: EAP session adding &reply:State = 0x3d1519743d1700a3 (56) [eap] = handled (56) } # authenticate = handled (56) Using Post-Auth-Type Challenge (56) # Executing group from file /etc/raddb/sites-enabled/default (56) Challenge { ... } # empty sub-section is ignored (56) Sent Access-Challenge Id 78 from xx.xx.xx.xx:1812 to 192.168.14.247:1024 length 0 (56) EAP-Message = 0x010200061920 (56) Message-Authenticator = 0x00000000000000000000000000000000 (56) State = 0x3d1519743d1700a3e8b8cc523e8178d3 (56) Finished request Waking up in 4.9 seconds. (57) Received Access-Request Id 79 from 192.168.14.247:1024 to xx.xx.xx.xx:1812 length 357 (57) User-Name = "oreshkin" (57) Framed-MTU = 1450 (57) EAP-Message = 0x020200a619800000009c16030300970100009303035ed4e326024575b5f7657d7682eaede311614a375a55cd2f5f103f6234f22c1600002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000040000500050100000000000a00080006001d (57) Message-Authenticator = 0x06f6d74039679bf38f0cd855bfd2e083 (57) NAS-IP-Address = 192.168.14.247 (57) NAS-Identifier = "3Com AP9552 Dual Band 802.11n" (57) NAS-Port = 16912385 (57) NAS-Port-Type = Wireless-802.11 (57) Service-Type = Framed-User (57) Framed-Protocol = PPP (57) Calling-Station-Id = "30-E3-7A-D5-61-F0" (57) Called-Station-Id = "40-01-C6-12-9A-50:HEPD-COMMON" (57) Framed-IP-Address = 10.2.0.118 (57) State = 0x3d1519743d1700a3e8b8cc523e8178d3 (57) session-state: No cached attributes (57) # Executing section authorize from file /etc/raddb/sites-enabled/default (57) authorize { (57) policy filter_username { (57) if (&User-Name) { (57) if (&User-Name) -> TRUE (57) if (&User-Name) { (57) if (&User-Name =~ / /) { (57) if (&User-Name =~ / /) -> FALSE (57) if (&User-Name =~ /@[^@]*@/ ) { (57) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (57) if (&User-Name =~ /\.\./ ) { (57) if (&User-Name =~ /\.\./ ) -> FALSE (57) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (57) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (57) if (&User-Name =~ /\.$/) { (57) if (&User-Name =~ /\.$/) -> FALSE (57) if (&User-Name =~ /(a)\./) { (57) if (&User-Name =~ /(a)\./) -> FALSE (57) } # if (&User-Name) = notfound (57) } # policy filter_username = notfound (57) [preprocess] = ok (57) [chap] = noop (57) [mschap] = noop (57) suffix: Checking for suffix after "@" (57) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (57) suffix: No such realm "NULL" (57) [suffix] = noop (57) ntdomain: Checking for prefix before "\" (57) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (57) ntdomain: No such realm "NULL" (57) [ntdomain] = noop (57) eap: Peer sent EAP Response (code 2) ID 2 length 166 (57) eap: Continuing tunnel setup (57) [eap] = ok (57) } # authorize = ok (57) Found Auth-Type = eap (57) # Executing group from file /etc/raddb/sites-enabled/default (57) authenticate { (57) eap: Expiring EAP session with state 0x3d1519743d1700a3 (57) eap: Finished EAP session with state 0x3d1519743d1700a3 (57) eap: Previous EAP request found for state 0x3d1519743d1700a3, released from the list (57) eap: Peer sent packet with method EAP PEAP (25) (57) eap: Calling submodule eap_peap to process data (57) eap_peap: Continuing EAP-TLS (57) eap_peap: Peer indicated complete TLS record size will be 156 bytes (57) eap_peap: Got complete TLS record (156 bytes) (57) eap_peap: [eaptls verify] = length included (57) eap_peap: (other): before/accept initialization (57) eap_peap: TLS_accept: before/accept initialization (57) eap_peap: <<< recv TLS 1.2 [length 0097] (57) eap_peap: TLS_accept: SSLv3 read client hello A (57) eap_peap: >>> send TLS 1.2 [length 0039] (57) eap_peap: TLS_accept: SSLv3 write server hello A (57) eap_peap: >>> send TLS 1.2 [length 08d3] (57) eap_peap: TLS_accept: SSLv3 write certificate A (57) eap_peap: >>> send TLS 1.2 [length 014d] (57) eap_peap: TLS_accept: SSLv3 write key exchange A (57) eap_peap: >>> send TLS 1.2 [length 0004] (57) eap_peap: TLS_accept: SSLv3 write server done A (57) eap_peap: TLS_accept: SSLv3 flush data (57) eap_peap: TLS_accept: SSLv3 read client certificate A (57) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (57) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (57) eap_peap: In SSL Handshake Phase (57) eap_peap: In SSL Accept mode (57) eap_peap: [eaptls process] = handled (57) eap: Sending EAP Request (code 1) ID 3 length 1004 (57) eap: EAP session adding &reply:State = 0x3d1519743c1600a3 (57) [eap] = handled (57) } # authenticate = handled (57) Using Post-Auth-Type Challenge (57) # Executing group from file /etc/raddb/sites-enabled/default (57) Challenge { ... } # empty sub-section is ignored (57) Sent Access-Challenge Id 79 from xx.xx.xx.xx:1812 to 192.168.14.247:1024 length 0 (57) EAP-Message = 0x010303ec19c000000a7116030300390200003503035beaa86e445904d46f99b80f745ada22ce0d26c0dede6119489cfe4452d2b0a300c03000000dff01000100000b00040300010216030308d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01010b050030 (57) Message-Authenticator = 0x00000000000000000000000000000000 (57) State = 0x3d1519743c1600a3e8b8cc523e8178d3 (57) Finished request Waking up in 4.9 seconds. (58) Received Access-Request Id 80 from 192.168.14.247:1024 to xx.xx.xx.xx:1812 length 197 (58) User-Name = "oreshkin" (58) Framed-MTU = 1450 (58) EAP-Message = 0x020300061900 (58) Message-Authenticator = 0x6145821a369fb8f2866dc4715978b0b2 (58) NAS-IP-Address = 192.168.14.247 (58) NAS-Identifier = "3Com AP9552 Dual Band 802.11n" (58) NAS-Port = 16912385 (58) NAS-Port-Type = Wireless-802.11 (58) Service-Type = Framed-User (58) Framed-Protocol = PPP (58) Calling-Station-Id = "30-E3-7A-D5-61-F0" (58) Called-Station-Id = "40-01-C6-12-9A-50:HEPD-COMMON" (58) Framed-IP-Address = 10.2.0.118 (58) State = 0x3d1519743c1600a3e8b8cc523e8178d3 (58) session-state: No cached attributes (58) # Executing section authorize from file /etc/raddb/sites-enabled/default (58) authorize { (58) policy filter_username { (58) if (&User-Name) { (58) if (&User-Name) -> TRUE (58) if (&User-Name) { (58) if (&User-Name =~ / /) { (58) if (&User-Name =~ / /) -> FALSE (58) if (&User-Name =~ /@[^@]*@/ ) { (58) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (58) if (&User-Name =~ /\.\./ ) { (58) if (&User-Name =~ /\.\./ ) -> FALSE (58) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (58) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (58) if (&User-Name =~ /\.$/) { (58) if (&User-Name =~ /\.$/) -> FALSE (58) if (&User-Name =~ /(a)\./) { (58) if (&User-Name =~ /(a)\./) -> FALSE (58) } # if (&User-Name) = notfound (58) } # policy filter_username = notfound (58) [preprocess] = ok (58) [chap] = noop (58) [mschap] = noop (58) suffix: Checking for suffix after "@" (58) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (58) suffix: No such realm "NULL" (58) [suffix] = noop (58) ntdomain: Checking for prefix before "\" (58) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (58) ntdomain: No such realm "NULL" (58) [ntdomain] = noop (58) eap: Peer sent EAP Response (code 2) ID 3 length 6 (58) eap: Continuing tunnel setup (58) [eap] = ok (58) } # authorize = ok (58) Found Auth-Type = eap (58) # Executing group from file /etc/raddb/sites-enabled/default (58) authenticate { (58) eap: Expiring EAP session with state 0x3d1519743c1600a3 (58) eap: Finished EAP session with state 0x3d1519743c1600a3 (58) eap: Previous EAP request found for state 0x3d1519743c1600a3, released from the list (58) eap: Peer sent packet with method EAP PEAP (25) (58) eap: Calling submodule eap_peap to process data (58) eap_peap: Continuing EAP-TLS (58) eap_peap: Peer ACKed our handshake fragment (58) eap_peap: [eaptls verify] = request (58) eap_peap: [eaptls process] = handled (58) eap: Sending EAP Request (code 1) ID 4 length 1000 (58) eap: EAP session adding &reply:State = 0x3d1519743f1100a3 (58) [eap] = handled (58) } # authenticate = handled (58) Using Post-Auth-Type Challenge (58) # Executing group from file /etc/raddb/sites-enabled/default (58) Challenge { ... } # empty sub-section is ignored (58) Sent Access-Challenge Id 80 from xx.xx.xx.xx:1812 to 192.168.14.247:1024 length 0 (58) EAP-Message = 0x010403e81940f380d8c5155b8eb1fb79d0094a95a1908aa3d079dcf2dab14e3c12a2ab5494 d1c2430b1e8c6de4b03899f1315c96304f66bb40bd632d817172ece81732a4256ffbf9df90317051de700004e8308204e4308203cca003020102020900d5c6e8bb4ac2077e300d06092a864886f70d01010b (58) Message-Authenticator = 0x00000000000000000000000000000000 (58) State = 0x3d1519743f1100a3e8b8cc523e8178d3 (58) Finished request Waking up in 4.9 seconds. (59) Received Access-Request Id 81 from 192.168.14.247:1024 to xx.xx.xx.xx:1812 length 197 (59) User-Name = "oreshkin" (59) Framed-MTU = 1450 (59) EAP-Message = 0x020400061900 (59) Message-Authenticator = 0x2ce77fed67c4ae1581b0d25e1445d267 (59) NAS-IP-Address = 192.168.14.247 (59) NAS-Identifier = "3Com AP9552 Dual Band 802.11n" (59) NAS-Port = 16912385 (59) NAS-Port-Type = Wireless-802.11 (59) Service-Type = Framed-User (59) Framed-Protocol = PPP (59) Calling-Station-Id = "30-E3-7A-D5-61-F0" (59) Called-Station-Id = "40-01-C6-12-9A-50:HEPD-COMMON" (59) Framed-IP-Address = 10.2.0.118 (59) State = 0x3d1519743f1100a3e8b8cc523e8178d3 (59) session-state: No cached attributes (59) # Executing section authorize from file /etc/raddb/sites-enabled/default (59) authorize { (59) policy filter_username { (59) if (&User-Name) { (59) if (&User-Name) -> TRUE (59) if (&User-Name) { (59) if (&User-Name =~ / /) { (59) if (&User-Name =~ / /) -> FALSE (59) if (&User-Name =~ /@[^@]*@/ ) { (59) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (59) if (&User-Name =~ /\.\./ ) { (59) if (&User-Name =~ /\.\./ ) -> FALSE (59) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (59) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (59) if (&User-Name =~ /\.$/) { (59) if (&User-Name =~ /\.$/) -> FALSE (59) if (&User-Name =~ /(a)\./) { (59) if (&User-Name =~ /(a)\./) -> FALSE (59) } # if (&User-Name) = notfound (59) } # policy filter_username = notfound (59) [preprocess] = ok (59) [chap] = noop (59) [mschap] = noop (59) suffix: Checking for suffix after "@" (59) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (59) suffix: No such realm "NULL" (59) [suffix] = noop (59) ntdomain: Checking for prefix before "\" (59) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (59) ntdomain: No such realm "NULL" (59) [ntdomain] = noop (59) eap: Peer sent EAP Response (code 2) ID 4 length 6 (59) eap: Continuing tunnel setup (59) [eap] = ok (59) } # authorize = ok (59) Found Auth-Type = eap (59) # Executing group from file /etc/raddb/sites-enabled/default (59) authenticate { (59) eap: Expiring EAP session with state 0x3d1519743f1100a3 (59) eap: Finished EAP session with state 0x3d1519743f1100a3 (59) eap: Previous EAP request found for state 0x3d1519743f1100a3, released from the list (59) eap: Peer sent packet with method EAP PEAP (25) (59) eap: Calling submodule eap_peap to process data (59) eap_peap: Continuing EAP-TLS (59) eap_peap: Peer ACKed our handshake fragment (59) eap_peap: [eaptls verify] = request (59) eap_peap: [eaptls process] = handled (59) eap: Sending EAP Request (code 1) ID 5 length 691 (59) eap: EAP session adding &reply:State = 0x3d1519743e1000a3 (59) [eap] = handled (59) } # authenticate = handled (59) Using Post-Auth-Type Challenge (59) # Executing group from file /etc/raddb/sites-enabled/default (59) Challenge { ... } # empty sub-section is ignored (59) Sent Access-Challenge Id 81 from xx.xx.xx.xx:1812 to 192.168.14.247:1024 length 0 (59) EAP-Message = 0x010502b319000530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b050003820101007f15d37224ffa7b8db1d8ed23f49758db260c870aeedbcb0b706dfda4b208f (59) Message-Authenticator = 0x00000000000000000000000000000000 (59) State = 0x3d1519743e1000a3e8b8cc523e8178d3 (59) Finished request Waking up in 4.9 seconds. (60) Received Access-Request Id 82 from 192.168.14.247:1024 to xx.xx.xx.xx:1812 length 327 (60) User-Name = "oreshkin" (60) Framed-MTU = 1450 (60) EAP-Message = 0x0205008819800000007e1603030046100000424104f08ac61e32eea24000efa0a488eda5adc7a1ea9bcf5a8b6230b50ae0a1280df31ed3140efaaf33b2839bf5d30ed4f38c9241b5e4e5aa178bdff8b6f55019213b1403030001011603030028000000000000000097acd41c9881c9945775f7d91abaac (60) Message-Authenticator = 0x98d42f4e131a1c1bc42ef74aca121de5 (60) NAS-IP-Address = 192.168.14.247 (60) NAS-Identifier = "3Com AP9552 Dual Band 802.11n" (60) NAS-Port = 16912385 (60) NAS-Port-Type = Wireless-802.11 (60) Service-Type = Framed-User (60) Framed-Protocol = PPP (60) Calling-Station-Id = "30-E3-7A-D5-61-F0" (60) Called-Station-Id = "40-01-C6-12-9A-50:HEPD-COMMON" (60) Framed-IP-Address = 10.2.0.118 (60) State = 0x3d1519743e1000a3e8b8cc523e8178d3 (60) session-state: No cached attributes (60) # Executing section authorize from file /etc/raddb/sites-enabled/default (60) authorize { (60) policy filter_username { (60) if (&User-Name) { (60) if (&User-Name) -> TRUE (60) if (&User-Name) { (60) if (&User-Name =~ / /) { (60) if (&User-Name =~ / /) -> FALSE (60) if (&User-Name =~ /@[^@]*@/ ) { (60) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (60) if (&User-Name =~ /\.\./ ) { (60) if (&User-Name =~ /\.\./ ) -> FALSE (60) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (60) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (60) if (&User-Name =~ /\.$/) { (60) if (&User-Name =~ /\.$/) -> FALSE (60) if (&User-Name =~ /(a)\./) { (60) if (&User-Name =~ /(a)\./) -> FALSE (60) } # if (&User-Name) = notfound (60) } # policy filter_username = notfound (60) [preprocess] = ok (60) [chap] = noop (60) [mschap] = noop (60) suffix: Checking for suffix after "@" (60) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (60) suffix: No such realm "NULL" (60) [suffix] = noop (60) ntdomain: Checking for prefix before "\" (60) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (60) ntdomain: No such realm "NULL" (60) [ntdomain] = noop (60) eap: Peer sent EAP Response (code 2) ID 5 length 136 (60) eap: Continuing tunnel setup (60) [eap] = ok (60) } # authorize = ok(61) Framed-IP-Address = 10.2.0.118 (61) State = 0x3d151974391300a3e8b8cc523e8178d3 (61) session-state: No cached attributes (61) # Executing section authorize from file /etc/raddb/sites-enabled/default (61) authorize { (61) policy filter_username { (61) if (&User-Name) { (61) if (&User-Name) -> TRUE (61) if (&User-Name) { (61) if (&User-Name =~ / /) { (61) if (&User-Name =~ / /) -> FALSE (61) if (&User-Name =~ /@[^@]*@/ ) { (61) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (61) if (&User-Name =~ /\.\./ ) { (61) if (&User-Name =~ /\.\./ ) -> FALSE (61) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (61) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (61) if (&User-Name =~ /\.$/) { (61) if (&User-Name =~ /\.$/) -> FALSE (61) if (&User-Name =~ /(a)\./) { (61) if (&User-Name =~ /(a)\./) -> FALSE (61) } # if (&User-Name) = notfound (61) } # policy filter_username = notfound (61) [preprocess] = ok (61) [chap] = noop (61) [mschap] = noop (61) suffix: Checking for suffix after "@" (61) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (61) suffix: No such realm "NULL" (61) [suffix] = noop (61) ntdomain: Checking for prefix before "\" (61) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (61) ntdomain: No such realm "NULL" (61) [ntdomain] = noop (61) eap: Peer sent EAP Response (code 2) ID 6 length 6 (61) eap: Continuing tunnel setup (61) [eap] = ok (61) } # authorize = ok (60) Found Auth-Type = eap (60) # Executing group from file /etc/raddb/sites-enabled/default (60) authenticate { (60) eap: Expiring EAP session with state 0x3d1519743e1000a3 (60) eap: Finished EAP session with state 0x3d1519743e1000a3 (60) eap: Previous EAP request found for state 0x3d1519743e1000a3, released from the list (60) eap: Peer sent packet with method EAP PEAP (25) (60) eap: Calling submodule eap_peap to process data (60) eap_peap: Continuing EAP-TLS (60) eap_peap: Peer indicated complete TLS record size will be 126 bytes (60) eap_peap: Got complete TLS record (126 bytes) (60) eap_peap: [eaptls verify] = length included (60) eap_peap: <<< recv TLS 1.2 [length 0046] (60) eap_peap: TLS_accept: SSLv3 read client key exchange A (60) eap_peap: TLS_accept: SSLv3 read certificate verify A (60) eap_peap: <<< recv TLS 1.2 [length 0001] (60) eap_peap: <<< recv TLS 1.2 [length 0010] (60) eap_peap: TLS_accept: SSLv3 read finished A (60) eap_peap: >>> send TLS 1.2 [length 0001] (60) eap_peap: TLS_accept: SSLv3 write change cipher spec A (60) eap_peap: >>> send TLS 1.2 [length 0010] (60) eap_peap: TLS_accept: SSLv3 write finished A (60) eap_peap: TLS_accept: SSLv3 flush data (60) eap_peap: (other): SSL negotiation finished successfully (60) eap_peap: SSL Connection Established (60) eap_peap: [eaptls process] = handled (60) eap: Sending EAP Request (code 1) ID 6 length 57 (60) eap: EAP session adding &reply:State = 0x3d151974391300a3 (60) [eap] = handled (60) } # authenticate = handled (60) Using Post-Auth-Type Challenge (60) # Executing group from file /etc/raddb/sites-enabled/default (60) Challenge { ... } # empty sub-section is ignored (60) Sent Access-Challenge Id 82 from xx.xx.xx.xx:1812 to 192.168.14.247:1024 length 0 (60) EAP-Message = 0x0106003919001403030001011603030028997adf21b5a322da8b0b5a4e195459ed1f8b4525aa8656aa97533d11756d8b0d0f19c2ed93803940 (60) Message-Authenticator = 0x00000000000000000000000000000000 (60) State = 0x3d151974391300a3e8b8cc523e8178d3 (60) Finished request Waking up in 4.9 seconds. (61) Received Access-Request Id 83 from 192.168.14.247:1024 to xx.xx.xx.xx:1812 length 197 (61) User-Name = "oreshkin" (61) Framed-MTU = 1450 (61) EAP-Message = 0x020600061900 (61) Message-Authenticator = 0x612a19c5fed77f1693fcdbc3857b8f68 (61) NAS-IP-Address = 192.168.14.247 (61) NAS-Identifier = "3Com AP9552 Dual Band 802.11n" (61) NAS-Port = 16912385 (61) NAS-Port-Type = Wireless-802.11 (61) Service-Type = Framed-User (61) Framed-Protocol = PPP (61) Calling-Station-Id = "30-E3-7A-D5-61-F0" (61) Called-Station-Id = "40-01-C6-12-9A-50:HEPD-COMMON" (61) Framed-IP-Address = 10.2.0.118 (61) State = 0x3d151974391300a3e8b8cc523e8178d3 (61) session-state: No cached attributes (61) # Executing section authorize from file /etc/raddb/sites-enabled/default (61) authorize { (61) policy filter_username { (61) if (&User-Name) { (61) if (&User-Name) -> TRUE (61) if (&User-Name) { (61) if (&User-Name =~ / /) { (61) if (&User-Name =~ / /) -> FALSE (61) if (&User-Name =~ /@[^@]*@/ ) { (61) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (61) if (&User-Name =~ /\.\./ ) { (61) if (&User-Name =~ /\.\./ ) -> FALSE (61) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (61) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (61) if (&User-Name =~ /\.$/) { (61) if (&User-Name =~ /\.$/) -> FALSE (61) if (&User-Name =~ /(a)\./) { (61) if (&User-Name =~ /(a)\./) -> FALSE (61) } # if (&User-Name) = notfound (61) } # policy filter_username = notfound (61) [preprocess] = ok (61) [chap] = noop (61) [mschap] = noop (61) suffix: Checking for suffix after "@" (61) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (61) suffix: No such realm "NULL" (61) [suffix] = noop (61) ntdomain: Checking for prefix before "\" (61) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (61) ntdomain: No such realm "NULL" (61) [ntdomain] = noop (61) eap: Peer sent EAP Response (code 2) ID 6 length 6 (61) eap: Continuing tunnel setup (61) [eap] = ok (61) } # authorize = ok (61) Found Auth-Type = eap (61) # Executing group from file /etc/raddb/sites-enabled/default (61) authenticate { (61) eap: Expiring EAP session with state 0x3d151974391300a3 (61) eap: Finished EAP session with state 0x3d151974391300a3 (61) eap: Previous EAP request found for state 0x3d151974391300a3, released from the list (61) eap: Peer sent packet with method EAP PEAP (25) (61) eap: Calling submodule eap_peap to process data (61) eap_peap: Continuing EAP-TLS (61) eap_peap: Peer ACKed our handshake fragment. handshake is finished (61) eap_peap: [eaptls verify] = success (61) eap_peap: [eaptls process] = success (61) eap_peap: Session established. Decoding tunneled attributes (61) eap_peap: PEAP state TUNNEL ESTABLISHED (61) eap: Sending EAP Request (code 1) ID 7 length 40 (61) eap: EAP session adding &reply:State = 0x3d151974381200a3 (61) [eap] = handled (61) } # authenticate = handled (61) Using Post-Auth-Type Challenge (61) # Executing group from file /etc/raddb/sites-enabled/default (61) Challenge { ... } # empty sub-section is ignored (61) Sent Access-Challenge Id 83 from xx.xx.xx.xx:1812 to 192.168.14.247:1024 length 0 (61) EAP-Message = 0x010700281900170303001d997adf21b5a322dbf91229eb191f00a968b5fb9dc729dca9f16bd2443c (61) Message-Authenticator = 0x00000000000000000000000000000000 (61) State = 0x3d151974381200a3e8b8cc523e8178d3 (61) Finished request Waking up in 4.9 seconds. (62) Received Access-Request Id 84 from 192.168.14.247:1024 to xx.xx.xx.xx:1812 length 235 (62) User-Name = "oreshkin" (62) Framed-MTU = 1450 (62) EAP-Message = 0x0207002c190017030300210000000000000001d8f82029d559c295475829493afb7b9212a45f69dd31bfa7c0 (62) Message-Authenticator = 0xe5a810e7709c0829d8273b774dec8860 (62) NAS-IP-Address = 192.168.14.247 (62) NAS-Identifier = "3Com AP9552 Dual Band 802.11n" (62) NAS-Port = 16912385 (62) NAS-Port-Type = Wi(62) Service-Type = Framed-User (62) Framed-Protocol = PPP (62) Calling-Station-Id = "30-E3-7A-D5-61-F0" (62) Called-Station-Id = "40-01-C6-12-9A-50:HEPD-COMMON" (62) Framed-IP-Address = 10.2.0.118 (62) State = 0x3d151974381200a3e8b8cc523e8178d3 (62) session-state: No cached attributes (62) # Executing section authorize from file /etc/raddb/sites-enabled/default (62) authorize { (62) policy filter_username { (62) if (&User-Name) { (62) if (&User-Name) -> TRUE (62) if (&User-Name) { (62) if (&User-Name =~ / /) { (62) if (&User-Name =~ / /) -> FALSE (62) if (&User-Name =~ /@[^@]*@/ ) { (62) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (62) if (&User-Name =~ /\.\./ ) { (62) if (&User-Name =~ /\.\./ ) -> FALSE (62) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (62) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (62) if (&User-Name =~ /\.$/) { (62) if (&User-Name =~ /\.$/) -> FALSE (62) if (&User-Name =~ /(a)\./) { (62) if (&User-Name =~ /(a)\./) -> FALSE (62) } # if (&User-Name) = notfound (62) } # policy filter_username = notfound (62) [preprocess] = ok (62) [chap] = noop (62) [mschap] = noop (62) suffix: Checking for suffix after "@" (62) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (62) suffix: No such realm "NULL" (62) [suffix] = noop (62) ntdomain: Checking for prefix before "\" (62) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (62) ntdomain: No such realm "NULL" (62) [ntdomain] = noop (62) eap: Peer sent EAP Response (code 2) ID 7 length 44 (62) eap: Continuing tunnel setup (62) [eap] = ok (62) } # authorize = ok (62) Found Auth-Type = eap (62) # Executing group from file /etc/raddb/sites-enabled/default (62) authenticate { (62) eap: Expiring EAP session with state 0x3d151974381200a3 (62) eap: Finished EAP session with state 0x3d151974381200a3 (62) eap: Previous EAP request found for state 0x3d151974381200a3, released from the list (62) eap: Peer sent packet with method EAP PEAP (25) (62) eap: Calling submodule eap_peap to process data (62) eap_peap: Continuing EAP-TLS (62) eap_peap: [eaptls verify] = ok (62) eap_peap: Done initial handshake (62) eap_peap: [eaptls process] = ok (62) eap_peap: Session established. Decoding tunneled attributes (62) eap_peap: PEAP state WAITING FOR INNER IDENTITY (62) eap_peap: Identity - oreshkin (62) eap_peap: Got inner identity 'oreshkin' (62) eap_peap: Setting default EAP type for tunneled EAP session (62) eap_peap: Got tunneled request (62) eap_peap: EAP-Message = 0x0207000d016f726573686b696e (62) eap_peap: Setting User-Name to oreshkin (62) eap_peap: Sending tunneled request to inner-tunnel (62) eap_peap: EAP-Message = 0x0207000d016f726573686b696e (62) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (62) eap_peap: User-Name = "oreshkin" (62) eap_peap: Framed-MTU = 1450 (62) eap_peap: NAS-IP-Address = 192.168.14.247 (62) eap_peap: NAS-Identifier = "3Com AP9552 Dual Band 802.11n" (62) eap_peap: NAS-Port = 16912385 (62) eap_peap: NAS-Port-Type = Wireless-802.11 (62) eap_peap: Service-Type = Framed-User (62) eap_peap: Framed-Protocol = PPP (62) eap_peap: Calling-Station-Id = "30-E3-7A-D5-61-F0" (62) eap_peap: Called-Station-Id = "40-01-C6-12-9A-50:HEPD-COMMON" (62) eap_peap: Framed-IP-Address = 10.2.0.118 .... (72) eap: Expiring EAP session with state 0x34bd73d634b56993 (72) eap: Finished EAP session with state 0x34bd73d634b56993 (72) eap: Previous EAP request found for state 0x34bd73d634b56993, released from the list (72) eap: Peer sent packet with method EAP MSCHAPv2 (26) (72) eap: Calling submodule eap_mschapv2 to process data (72) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (72) eap_mschapv2: authenticate { (72) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (72) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password (72) mschap: Creating challenge hash with username: oreshkin (72) mschap: Client is using MS-CHAPv2 (72) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication (72) mschap: ERROR: MS-CHAP2-Response is incorrect (72) [mschap] = reject (72) } # authenticate = reject (72) eap: Sending EAP Failure (code 4) ID 8 length 4 (72) eap: Freeing handler (72) [eap] = reject (72) } # authenticate = reject (72) Failed to authenticate the user (72) Login incorrect (mschap: FAILED: No NT/LM-Password. Cannot perform authentication): [ores hkin] (from client 3com9552 port 16912385 cli 30-E3-7A-D5-61-F0 via TLS tunnel) (72) Using Post-Auth-Type Reject (72) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (72) Post-Auth-Type REJECT { (72) update outer.session-state { (72) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: FAILED: No NT /LM-Password. Cannot perform authentication' (72) } # update outer.session-state = noop (72) } # Post-Auth-Type REJECT = noop (72) } # server inner-tunnel (72) Virtual server sending reply (72) Framed-Protocol = PPP (72) Framed-Compression = Van-Jacobson-TCP-IP (72) MS-CHAP-Error = "\010E=691 R=1 C=2aadf661100584402f8bb93462af5d53 V=3 M=Authentication failed" (72) EAP-Message = 0x04080004 (72) Message-Authenticator = 0x00000000000000000000000000000000 (72) eap_peap: Got tunneled reply code 3 (72) eap_peap: Framed-Protocol = PPP (72) eap_peap: Framed-Compression = Van-Jacobson-TCP-IP (72) eap_peap: MS-CHAP-Error = "\010E=691 R=1 C=2aadf661100584402f8bb93462af5d53 V=3 M=Authentication failed" (72) eap_peap: EAP-Message = 0x04080004 (72) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (72) eap_peap: Got tunneled reply RADIUS code 3 (72) eap_peap: Framed-Protocol = PPP (72) eap_peap: Framed-Compression = Van-Jacobson-TCP-IP (72) eap_peap: MS-CHAP-Error = "\010E=691 R=1 C=2aadf661100584402f8bb93462af5d53 V=3 M=Authentication failed" (72) eap_peap: EAP-Message = 0x04080004 (72) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (72) eap_peap: Tunneled authentication was rejected (72) eap_peap: FAILURE (72) eap: Sending EAP Request (code 1) ID 9 length 46 (72) eap: EAP session adding &reply:State = 0xe46f1db3e366046e (72) [eap] = handled (72) } # authenticate = handled (72) Using Post-Auth-Type Challenge (72) # Executing group from file /etc/raddb/sites-enabled/default (72) Challenge { ... } # empty sub-section is ignored (72) session-state: Saving cached attributes (72) Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. Cannot perform authentication" (72) Sent Access-Challenge Id 94 from xx.xx.xx.xx:1812 to 192.168.14.247:1024 length 0 (72) EAP-Message = 0x0109002e190017030300232f1c04ca542acfe094941bb20f03a5498700ed1375fd28eec62833f28ad725fdd3f9f5 (72) Message-Authenticator = 0x00000000000000000000000000000000 (72) State = 0xe46f1db3e366046e2153a66971fb5083 (72) Finished request (73) Received Access-Request Id 95 from 192.168.14.247:1024 to xx.xx.xx.xx:1812 length 237 (73) User-Name = "oreshkin" (73) Framed-MTU = 1450 (73) EAP-Message = 0x0209002e190017030300230000000000000003f7e3c43cc90506a28d17008623f68c26d168402c735168f2b37c1e (73) Message-Authenticator = 0x8c9a4128ba7bd82bf5fc6ac461bd3560 (73) NAS-IP-Address = 192.168.14.247 (73) NAS-Identifier = "3Com AP9552 Dual Band 802.11n" (73) NAS-Port = 16912385 (73) NAS-Port-Type = Wireless-802.11 (73) Service-Type = Framed-User (73) Framed-Protocol = PPP (73) Calling-Station-Id = "30-E3-7A-D5-61-F0" (73) Called-Station-Id = "40-01-C6-12-9A-50:HEPD-COMMON" (73) Framed-IP-Address = 10.2.0.118 (73) State = 0xe46f1db3e366046e2153a66971fb5083 (73) Restoring &session-state (73) &session-state:Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. Cannot perform authentication" (73) # Executing section authorize from file /etc/raddb/sites-enabled/default (73) authorize { (73) policy filter_username { (73) if (&User-Name) { (73) if (&User-Name) -> TRUE (73) if (&User-Name) { (73) if (&User-Name =~ / /) { (73) if (&User-Name =~ / /) -> FALSE (73) if (&User-Name =~ /@[^@]*@/ ) { (73) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (73) if (&User-Name =~ /\.\./ ) { (73) if (&User-Name =~ /\.\./ ) -> FALSE (73) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (73) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (73) if (&User-Name =~ /\.$/) { (73) if (&User-Name =~ /\.$/) -> FALSE (73) if (&User-Name =~ /(a)\./) { (73) if (&User-Name =~ /(a)\./) -> FALSE (73) } # if (&User-Name) = notfound (73) } # policy filter_username = notfound (73) [preprocess] = ok (73) [chap] = noop (73) [mschap] = noop (73) suffix: Checking for suffix after "@" (73) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL (73) suffix: No such realm "NULL" (73) [suffix] = noop (73) ntdomain: Checking for prefix before "\" (73) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL (73) ntdomain: No such realm "NULL" (73) [ntdomain] = noop (73) eap: Peer sent EAP Response (code 2) ID 9 length 46 (73) eap: Continuing tunnel setup (73) [eap] = ok (73) } # authorize = ok (73) Found Auth-Type = eap (73) # Executing group from file /etc/raddb/sites-enabled/default (73) authenticate { (73) eap: Expiring EAP session with state 0xe46f1db3e366046e (73) eap: Finished EAP session with state 0xe46f1db3e366046e (73) eap: Previous EAP request found for state 0xe46f1db3e366046e, released from the list (73) eap: Peer sent packet with method EAP PEAP (25) (73) eap: Calling submodule eap_peap to process data (73) eap_peap: Continuing EAP-TLS (73) eap_peap: [eaptls verify] = ok (73) eap_peap: Done initial handshake (73) eap_peap: [eaptls process] = ok (73) eap_peap: Session established. Decoding tunneled attributes (73) eap_peap: PEAP state send tlv failure (73) eap_peap: Received EAP-TLV response (73) eap_peap: ERROR: The users session was previously rejected: returning reject (again.) (73) eap_peap: This means you need to read the PREVIOUS messages in the debug output (73) eap_peap: to find out the reason why the user was rejected (73) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (73) eap_peap: what went wrong, and how to fix the problem (73) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (73) eap: Sending EAP Failure (code 4) ID 9 length 4 (73) eap: Failed in EAP select (73) [eap] = invalid (73) } # authenticate = invalid (73) Failed to authenticate the user (73) Login incorrect (eap_peap: The users session was previously rejected: returning reject (again.)): [oreshkin] (from client 3com9552 port 16912385 cli 30-E3-7A-D5-61-F0) (73) Using Post-Auth-Type Reject (73) # Executing group from file /etc/raddb/sites-enabled/default (73) Post-Auth-Type REJECT { (73) attr_filter.access_reject: EXPAND %{User-Name} (73) attr_filter.access_reject: --> oreshkin (73) attr_filter.access_reject: Matched entry DEFAULT at line 11 (73) [attr_filter.access_reject] = updated (73) [eap] = noop (73) policy remove_reply_message_if_eap { (73) if (&reply:EAP-Message && &reply:Reply-Message) { (73) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (73) else { (73) [noop] = noop (73) } # else = noop (73) } # policy remove_reply_message_if_eap = noop (73) } # Post-Auth-Type REJECT = updated (73) Delaying response for 1.000000 seconds (61) Cleaning up request packet ID 83 with timestamp +239 (62) Cleaning up request packet ID 84 with timestamp +239 (63) Cleaning up request packet ID 85 with timestamp +239 (64) Cleaning up request packet ID 86 with timestamp +239 Waking up in 0.3 seconds. Waking up in 0.6 seconds. .....

2 3

Can't append attributes to the Access-Accept relayed from the proxy home-server to the clients
by Difan Zhao 02 Jun '20

02 Jun '20

Hi Freeradius gurus, I am setting up a freeradius (ver 3.0.16) server on a ubundu 18.04 box and I will use it to authenticate admin access to the networking devices for the mgmt purpose. It doesn't store user passwords locally. It will proxy the authentication requests to a Windows NPS (also running the radius service) that has access to the Windows AD for the user credentials. The idea is that, this freeradius server would append the VSAs for users upon successful authentication to give them the adequate access on the switches, routers, firewalls, ...etc So I am able to proxy the authentication request to the NPS and I am getting Access-accept back. I am able to get the proper access to my firewall by sending the VSAs but only if I use local accounts. However, I just can't combine them together. Here is my authorize file dzhao Proxy-To-Realm := 'pason.com' Fortinet-Group-Name := 'RW' Here is my proxy.conf home_server CorpIT_NPS { type = auth ipaddr = it-00-nps-pro2 port = 1812 secret = xxx response_window = 60 zombie_period = 120 } home_server_pool CorpIT_NPS_pool { type = fail-over home_server = CorpIT_NPS } realm pason.com { auth_pool = CorpIT_NPS_pool } Here is my -X output. The NPS does MFA so the response is a little slow because I need to click on "approve" on the phone app. I don't see the Access-Accept packet to the client has the Fortinet VSA of "RW" included... Ready to process requests (0) Received Access-Request Id 42 from 172.16.0.99:1114 to 10.92.3.75:1812 length 104 (0) NAS-Identifier = "FGT60D4613054197" (0) User-Name = "dzhao" (0) User-Password = "Xxx" (0) NAS-Port-Type = Virtual (0) Acct-Session-Id = "6ddb75a0" (0) Connect-Info = "admin-login" (0) Fortinet-Vdom-Name = "root" (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "dzhao", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) files: users: Matched entry dzhao at line 1 (0) [files] = ok (0) sql: EXPAND %{User-Name} (0) sql: --> dzhao (0) sql: SQL-User-Name set to 'dzhao' rlm_sql (sql): Reserved connection (1) (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (0) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'dzhao' ORDER BY id (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'dzhao' ORDER BY id (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'dzhao' ORDER BY priority (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'dzhao' ORDER BY priority (0) sql: User not found in any groups rlm_sql (sql): Released connection (1) Need 4 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.1.44-MariaDB-0ubuntu0.18.04.1, protocol version 10 (0) [sql] = notfound (0) [expiration] = noop (0) [logintime] = noop (0) [pap] = noop (0) } # authorize = ok (0) Starting proxy to home server 10.92.3.105 port 1812 (0) Proxying request to home server 10.92.3.105 port 1812 timeout 30.000000 (0) Sent Access-Request Id 10 from 0.0.0.0:53464 to 10.92.3.105:1812 length 138 (0) NAS-Identifier = "FGT60D4613054197" (0) User-Name = "dzhao" (0) User-Password = "Xxx" (0) NAS-Port-Type = Virtual (0) Acct-Session-Id = "6ddb75a0" (0) Connect-Info = "admin-login" (0) Fortinet-Vdom-Name = "root" (0) Event-Timestamp = "Jun 1 2020 12:16:22 MDT" (0) NAS-IP-Address = 172.16.0.99 (0) Message-Authenticator := 0x00 (0) Proxy-State = 0x3432 Waking up in 0.3 seconds. (0) Expecting proxy response no later than 29.667310 seconds from now Waking up in 29.6 seconds. (0) Sending duplicate proxied request to home server 10.92.3.105 port 1812 - ID: 10 (0) Sent Access-Request Id 10 from 0.0.0.0:53464 to 10.92.3.105:1812 length 138 (0) NAS-Identifier = "FGT60D4613054197" (0) User-Name = "dzhao" (0) User-Password = "Xxx" (0) NAS-Port-Type = Virtual (0) Acct-Session-Id = "6ddb75a0" (0) Connect-Info = "admin-login" (0) Fortinet-Vdom-Name = "root" (0) Event-Timestamp = "Jun 1 2020 12:16:22 MDT" (0) NAS-IP-Address = 172.16.0.99 (0) Message-Authenticator := 0x00 (0) Proxy-State = 0x3432 Waking up in 25.0 seconds. (0) Marking home server 10.92.3.105 port 1812 alive (0) Clearing existing &reply: attributes (0) Received Access-Accept Id 10 from 10.92.3.105:1812 to 10.92.3.75:53464 length 82 (0) Proxy-State = 0x3432 (0) Framed-Protocol = PPP (0) Service-Type = Framed-User (0) Class = 0x94be085900000137000102000a5c03690000000031a22bda391cd93d01d635f7b722a976000000000000000d (0) # Executing section post-proxy from file /etc/freeradius/3.0/sites-enabled/default (0) post-proxy { (0) eap: No pre-existing handler found (0) [eap] = noop (0) } # post-proxy = noop (0) Found Auth-Type = Accept (0) Auth-Type = Accept, accepting the user (0) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (0) post-auth { (0) update { (0) No attributes updated (0) } # update = noop (0) sql: EXPAND .query (0) sql: --> .query (0) sql: Using query template 'query' rlm_sql (sql): Reserved connection (2) (0) sql: EXPAND %{User-Name} (0) sql: --> dzhao (0) sql: SQL-User-Name set to 'dzhao' (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'dzhao', 'Xxx', 'Access-Accept', '2020-06-01 12:16:22') (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'dzhao', 'Xxx', 'Access-Accept', '2020-06-01 12:16:22') (0) sql: SQL query returned: success (0) sql: 1 record(s) updated rlm_sql (sql): Released connection (2) Need 3 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (7), 1 of 25 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.1.44-MariaDB-0ubuntu0.18.04.1, protocol version 10 (0) [sql] = ok (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # post-auth = ok (0) Login OK: [dzhao] (from client FGT60D4613054197 port 0) (0) Sent Access-Accept Id 42 from 10.92.3.75:1812 to 172.16.0.99:1114 length 0 (0) Framed-Protocol = PPP (0) Service-Type = Framed-User (0) Class = 0x94be085900000137000102000a5c03690000000031a22bda391cd93d01d635f7b722a976000000000000000d (0) Finished request Waking up in 4.9 seconds. (0) Waiting for more responses from the home server Waking up in 0.3 seconds. (0) Waiting for more responses from the home server Waking up in 0.4 seconds. (0) Waiting for more responses from the home server Waking up in 0.7 seconds. (0) Waiting for more responses from the home server Waking up in 1.1 seconds. (0) Waiting for more responses from the home server Waking up in 1.6 seconds. (0) Waiting for more responses from the home server Waking up in 2.5 seconds. (0) Waiting for more responses from the home server Waking up in 3.7 seconds. (0) Waiting for more responses from the home server Waking up in 5.6 seconds. (0) Waiting for more responses from the home server Waking up in 8.5 seconds. (0) Cleaning up request packet ID 42 with timestamp +7 Ready to process requests I also tried to play with the ./mods-config/attr_filter/post-proxy file but it doesn't work for me either. Here is my post-proxy config dzhao Fortinet-Group-Name := 'RW' Please help! Thanks, Difan

2 4

UPN for AD authentication
by R3DNano 02 Jun '20

02 Jun '20

AFAIK, when I authenticate my users via ntlm_auth (samba AD bnind, etc..., not the LDAP module, as suggested by the docu), account names in SAM are used instead of UPN (please, correct me if I'm wrong) Is it possible to use UPN instead? What drawbacks can we have if we do this? Thanks

2 4

how to set require_client_cert on peap with freeradius 2.x
by Jim Shi 01 Jun '20

01 Jun '20

Hi, in eap.conf, it says: # You can make PEAP require a client cert by setting # # EAP-TLS-Require-Client-Cert = Yes # # in the control items for a request. What does it mean in the control items for a request? On which file? Can someone please help? Thanks a lot. Jim

2 1

using huntgroups to restrict users in particular groups
by Root, Paul T 01 Jun '20

01 Jun '20

Hi, I'm new to FreeRadius. I've built a test server with freeradius 3.0.13, mariadb 10.1.45, and daloradius 1.1-3 beta on CentOS 7. We are just starting into radius authentication. We just want it for logging into routers and switches for administration work. What I need is to define multiple groups of devices - in huntgroups. And multiple groups of users. There may be a base group of users that should be allowed to any huntgroup. But mostly, one user group is to be specific to one hunt group. I'm following the how-to for SQL-Huntgroups. https://wiki.freeradius.org/guide/SQL-Huntgroup-HOWTO MariaDB [radius]> select * from radhuntgroup; +----+-----------------+----------------------+--------------+ | id | groupname | nasipaddress | nasportid | +----+----------------+-----------------------+--------------+ | 1 | group1 | 10.161.161.0/24 | 0 | | 2 | group2 | 10.139.63.0/24 | 0 | +----+---------------+------------------------+-------------+ MariaDB [radius]> select * from radusergroup; +---------------+-----------------+-----------+ | username | groupname | priority | +---------------+-----------------+-----------+ | paul | usergroup1 | 0 | | ptr | usergroup2 | 0 | +---------------+-----------------+-----------+ MariaDB [radius]> select * from radgroupcheck; +----+--------------------------------------+-------------------+-----+-----------+ | id | groupname | attribute | op | value | +----+--------------------------------------+-------------------+-----+-----------+ | 1 | daloRADIUS-Disabled-Users | Auth-Type | := | Reject | | 2 | daloRADIUS-Disabled-Users | Auth-Type | := | Reject | | 3 | usergroup1 | Huntgroup-Name | == | group1 | | 4 | usergroup2 | Huntgroup-Name | == | group2 | +----+--------------------------------------+-------------------+-----+-----------+ However, both users can connect to either huntgroup. I must be missing something here. My impression is that this would be all that's needed. Maybe there is a configuration variable I missed? I also tried the update request to allow users groups/profiles to access a different has but if I edit sites-enables/defaults, I get an error trying to start radius. update request { Huntgroup-Name := "%{sql:SELECT groupname FROM radhuntgroup WHERE nasipaddress=='%{NAS-IP-Address}'}" # only allow usergroup1 to group1 if (SQL-Group == "usergroup1") { if (Huntgroup-Name != "group1") { reject } } } /etc/raddb/sites-enabled/default[307]: Entry is not in "attribute = value" format That's simplified but pretty much straight out of the how-to. I'm not stuck on the idea of daloradius or even SQL. But the user space will be managing, and they want a web admin. I could write my own simple one, as all we need to manage is users and huntgroups. Any ideas here? Thanks, Paul. Paul Root Lead Operations Engineer - IT Managed Services 390 Commerce Dr Woodbury, Mn 55125 651-312-5207 paul.root(a)centurylink.com This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.

2 2

Freeradius 3 with LDAP Authentication Bind as User
by Jason Leiby 01 Jun '20

01 Jun '20

Hi Experts, I am trying to setup my radius server to authenticate users with their AD password. I do not have access to our corporate Active Directory so I cannot use Samba and winbind, I only have access to the LDAP server that ties into AD. Each user has read only access to LDAP so they can bind with the correct credentials and verify the password. I have successfully setup freeradius to connect to the LDAP server and verify credentials as long as the ‘identity’ and ‘password’ are provided in the ldap module. What I would like to do is bind as the verifying user instead of using a single account. Scouring the internet has proven fruitless, so I was hoping you can point me in the correct direction. I am happy to provide logs and configs if needed. I would first like to confirm that this is feasible. Thank you, Jason

3 7

Windows Clients with SSID {2,3,4 suffix}
by Ted Hyde (RSI) 29 May '20

29 May '20

Greets - this isn't specifically a question regarding FR, but I believe it has enough relevance to the list, as well as FR in a slightly abstracted way (perhaps the solution rather than the situation). I have been using FR to handle my radius auth, split between networking devices and clients for wireless AP for a number of years. The majority of my hardware is Cisco, with AP's both as autonomous and LWAPP with a WLC. I've been seeing it for quite a while now (from Win 10 forward at least) - and to a particular end have just "lived with it" however am wondering if there has been any solution observed - particularly since there is a large distribution of transient clients in the eduroam sector. The problem? Multiple APs for coverage show mutiple SSIDs in the windows wireless network selector. Thus you get MYSSID, MYSSID 2, MYSSID 3 and so on in some attempt to rationally allow the user to choose the AP they want to connect to. I have been googling for a while now - far too many rabbit holes with little solid results - and have come across reasoning such as "you don't want to choose the rogue AP, so this alerts you" and "this lets you choose the strongest AP in the area" etc. My android devices don't do this, the Mac and IOS clients I service don't do this, my Linux clients don't do this - everyone but Windows seems to have the ability to automatically roam and not present multiple variants with suffix numbers in the SSID list. The problem with the multiple SSIDs in the list is really that sometimes windows comes back with the "can't connect to this network' error, which really impresses people for sure! (not). Of course it would be awesome for someone to pipe up and say "here's the registry setting and done", but it may not be as simple as that, understood. So some more configuration info: I do run a mix of autonomous AP's/LWAPP APs in an area, which I choose is based upon device count - typically if I'm only doing coverage for 3 or 4 APs - the expense and hassle of a WLC often isn't warranted. I also have typiclly 3-7 SSIDs (thus mbssid options are on) supporting the network; not all SSIDs are present on all bands, nor on all APs - however a lab scenario with 3 APs and identical configs in a 2.4ghz only setup showed the exact same results, so I am not expecting the more advanced config to be a culprit. For encryption, I'm typically configured for aes-ccm and tkip. I run multiple models of AP's typically with their most recent firmware, and mostly a/b/g/n, 2.5Ghz/5Ghz with only a very little ac. However this may be the kicker: some clients don't have the ability to run an enterprise auth method - so it's WPA2/PSK for them. Thus I have a mix of authentication - the PSK is at the AP itself, and anything enterprise (like EAP-TLS) is pushed forward to an FR instance. Interestingly, the EAP-TLS SSID's don't show the suffixes all the time - if I hover with my laptop it takes quite a while for Win10 to start showing SSID 2 for them, while anything that was WPA2/PSK is immediately shown as multiple SSIDs with suffixes. Thus the overall question here is less FR and more about picking folks' brains, wherein the solution may be provided by FR using a different auth key management path than the local WPA2-PSK (although I have never attempted such). But either way, Many thanks, Ted.

1 0

Bulk and Active leasequeries
by Ivane Porchkhidze 29 May '20

29 May '20

Hello, This is my first letter to this mailing list and I apologize in advance for possible errors in the format or content of the letter. Brief introduction, our subscribers (GPON, aDSL) receive IP addresses from DHCP server (FreeRADIUS 3.0.14 + MySQL 5.7) in accordance with opt82. In the case of aDSL, there is also a RADIUS server (same FreeRADIUS 3.0.14 + MySQL 5.7), which sends to cisco ISG policie for customer according to ip address. Everything worked just fine until arrival of BNG from Juniper. This device requires Bulk and Active leasequeries. After several days of searching in google, I got the impression that this is not supported in version 3.0.x? Or am I doing something wrong? What about 4.0.0? Best regards, Ivane Porchkhidze This message (including any attachments) is confidential and may be privileged. If you have received it by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. Please note that e-mails are susceptible to change. Silknet shall not be responsible nor liable for the proper and complete transmission of the information contained in this communication nor for any delay in its receipt or damage to your system. Silknet does not guarantee that the integrity of this communication has been maintained nor that this communication is free of viruses, interceptions or interference

2 4