- Freeradius-Users - lists.freeradius.org

unsubscribe
by support＠rankleads.com 15 Apr '20

15 Apr '20

Michael Buschmann | Support Manager www.RankLeads.com | michael(a)rankleads.com -----Original Message----- From: Freeradius-Users <freeradius-users-bounces+support=rankleads.com(a)lists.freeradius.org> On Behalf Of Zubair Ayub Sent: Wednesday, April 15, 2020 5:57 AM To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: Redis database Thanks alot everyone Thanks for your precious time you people's are great Get Outlook for Android<https://aka.ms/ghei36> ________________________________ From: Freeradius-Users <freeradius-users-bounces+zubairayub=hotmail.com(a)lists.freeradius.org> on behalf of Alan DeKok <aland(a)deployingradius.com> Sent: Wednesday, April 15, 2020 5:55:04 PM To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: Redis database On Apr 15, 2020, at 8:28 AM, Zubair Ayub <Zubairayub(a)hotmail.com> wrote: > > Thanks for you help, > I understand this now and also can you share related document it will > be helpful for me Edit raddb/mods-enabled/redis Change redis { ... contents ... } to redis redis1 { ... copy of contents edited for "redis1" ... } redis redis2 { ... copy of contents edited for "redis2" ... } And then use "redis1" or "redis2" instead of "redis" everywhere. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0

(no subject)
by Ali Arslan 15 Apr '20

15 Apr '20

Hello, I have installed freeradius 3.0.21 on ubuntu 18.04 server. I want to use mssql as radius dadabase server, so i installed freetds as apt-get install freetds-dev freetds-bin tdsodbc and configured /etc/freetds/freetds.conf file as [RadiusSqlServer] host = sqlserver_ip_address port = 1433 tds version = 7.0 and configured /etc/freeradius/mods-available/sql file to use rlm_sql_freetds as deriver. But I get error: Could not link driver rlm_sql_freetds: /usr/lib/freeradius/rlm_sql_freetds.so: cannot open shared object file: No such file or directory Make sure it (and all its dependent libraries!) are in the search path of your system's ld /etc/freeradius/mods-enabled/sql[27]: Instantiation failed for module "sql" I checked /usr/lib/freeradius/ folder but there is no file named rlm_sql_freetds.so. What else i should install to have deriver rlm_sql_freetds? The dbug output is: FreeRADIUS Version 3.0.21 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/sql including configuration file /etc/freeradius/mods-config/sql/main/mssql/queries.conf including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/utf8 including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/rfc7542 including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/mods-enabled/sql sql { driver = "rlm_sql_freetds" server = "RadiusSqlServer" port = 1433 login = "sa" password = <<< secret >>> radius_db = "WISP" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id,nasname,shortname,type,secret FROM nas" authorize_check_query = "SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT radgroupcheck.id,radgroupcheck.GroupName, radgroupcheck.Attribute,radgroupcheck.Value, radgroupcheck.op FROM radgroupcheck,radusergroup WHERE radusergroup.Username = '%{SQL-User-Name}' AND radusergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id" authorize_group_reply_query = "SELECT radgroupreply.id, radgroupreply.GroupName, radgroupreply.Attribute,radgroupreply.Value, radgroupreply.op FROM radgroupreply,radusergroup WHERE radusergroup.Username = '%{SQL-User-Name}' AND radusergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" auto_escape = no accounting { reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}" type { accounting-on { query = "UPDATE radacct SET AcctStopTime=DATEADD(SS, %{%{integer:Event-Timestamp}:-%l}, '19700101'), AcctSessionTime=%{%{integer:Event-Timestamp}:-%l} - DATEDIFF(SS, '1970-01-01', AcctStartTime), AcctTerminateCause='%{%{Acct-Terminate-Cause}:-NAS-Reboot}', AcctStopDelay = %{%{Acct-Delay-Time}:-0} WHERE AcctStopTime = 0 AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStartTime <= DATEADD(SS, %{%{integer:Event-Timestamp}:-%l}, '19700101')" } accounting-off { query = "UPDATE radacct SET AcctStopTime=DATEADD(SS, %{%{integer:Event-Timestamp}:-%l}, '19700101'), AcctSessionTime=%{%{integer:Event-Timestamp}:-%l} - DATEDIFF(SS, '1970-01-01', AcctStartTime), AcctTerminateCause='%{%{Acct-Terminate-Cause}:-NAS-Reboot}', AcctStopDelay = %{%{Acct-Delay-Time}:-0} WHERE AcctStopTime = 0 AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStartTime <= DATEADD(SS, %{%{integer:Event-Timestamp}:-%l}, '19700101')" } start { query = "INSERT INTO radacct ( AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPort, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, FramedIPv6Address, FramedIPv6Prefix, FramedInterfaceId, DelegatedIPv6Prefix, AcctStartDelay, AcctStopDelay, XAscendSessionSvrKey) VALUES('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', DATEADD(SS, %{%{integer:Event-Timestamp}:-%l}, '19700101'), '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}', '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}', '%{Delegated-IPv6-Prefix}', '%{Acct-Delay-Time}', '0', '%{X-Ascend-Session-Svr-Key}')" } interim-update { query = "UPDATE radacct SET FramedIPAddress = '%{Framed-IP-Address}', FramedIPv6Address = '%{Framed-IPv6-Address}', FramedIPv6Prefix = '%{Framed-IPv6-Prefix}', FramedInterfaceId = '%{Framed-Interface-Id}', DelegatedIPv6Prefix = '%{Delegated-IPv6-Prefix}' WHERE AcctUniqueId = '%{Acct-Unique-Session-ID}' AND AcctStopTime = 0" } stop { query = "UPDATE radacct SET AcctStopTime = DATEADD(SS, %{%{integer:Event-Timestamp}:-%l}, '19700101'), AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = convert(bigint, '%{%{Acct-Input-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Input-Octets}:-0}', AcctOutputOctets = convert(bigint, '%{%{Acct-Output-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Output-Octets}:-0}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{%{Acct-Delay-Time}:-0}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-ID}' AND AcctStopTime = 0" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (userName, pass, reply, authdate) VALUES('%{User-Name}', '%{%{User-Password}:-CHAP-PASSWORD}', '%{reply:Packet-Type}', '%S.%{expr:%M / 1000}')" } } Could not link driver rlm_sql_freetds: /usr/lib/freeradius/rlm_sql_freetds.so: cannot open shared object file: No such file or directory Make sure it (and all its dependent libraries!) are in the search path of your system's ld /etc/freeradius/mods-enabled/sql[27]: Instantiation failed for module "sql" root@lenova-ali:/home/e066377# freeradius -X FreeRADIUS Version 3.0.21 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/sql including configuration file /etc/freeradius/mods-config/sql/main/mssql/queries.conf including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/utf8 including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/rfc7542 including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/mods-enabled/sql sql { driver = "rlm_sql_freetds" server = "RadiusSqlServer" port = 1433 login = "sa" password = <<< secret >>> radius_db = "WISP" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id,nasname,shortname,type,secret FROM nas" authorize_check_query = "SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT radgroupcheck.id,radgroupcheck.GroupName, radgroupcheck.Attribute,radgroupcheck.Value, radgroupcheck.op FROM radgroupcheck,radusergroup WHERE radusergroup.Username = '%{SQL-User-Name}' AND radusergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id" authorize_group_reply_query = "SELECT radgroupreply.id, radgroupreply.GroupName, radgroupreply.Attribute,radgroupreply.Value, radgroupreply.op FROM radgroupreply,radusergroup WHERE radusergroup.Username = '%{SQL-User-Name}' AND radusergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" auto_escape = no accounting { reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}" type { accounting-on { query = "UPDATE radacct SET AcctStopTime=DATEADD(SS, %{%{integer:Event-Timestamp}:-%l}, '19700101'), AcctSessionTime=%{%{integer:Event-Timestamp}:-%l} - DATEDIFF(SS, '1970-01-01', AcctStartTime), AcctTerminateCause='%{%{Acct-Terminate-Cause}:-NAS-Reboot}', AcctStopDelay = %{%{Acct-Delay-Time}:-0} WHERE AcctStopTime = 0 AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStartTime <= DATEADD(SS, %{%{integer:Event-Timestamp}:-%l}, '19700101')" } accounting-off { query = "UPDATE radacct SET AcctStopTime=DATEADD(SS, %{%{integer:Event-Timestamp}:-%l}, '19700101'), AcctSessionTime=%{%{integer:Event-Timestamp}:-%l} - DATEDIFF(SS, '1970-01-01', AcctStartTime), AcctTerminateCause='%{%{Acct-Terminate-Cause}:-NAS-Reboot}', AcctStopDelay = %{%{Acct-Delay-Time}:-0} WHERE AcctStopTime = 0 AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStartTime <= DATEADD(SS, %{%{integer:Event-Timestamp}:-%l}, '19700101')" } start { query = "INSERT INTO radacct ( AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPort, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, FramedIPv6Address, FramedIPv6Prefix, FramedInterfaceId, DelegatedIPv6Prefix, AcctStartDelay, AcctStopDelay, XAscendSessionSvrKey) VALUES('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', DATEADD(SS, %{%{integer:Event-Timestamp}:-%l}, '19700101'), '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}', '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}', '%{Delegated-IPv6-Prefix}', '%{Acct-Delay-Time}', '0', '%{X-Ascend-Session-Svr-Key}')" } interim-update { query = "UPDATE radacct SET FramedIPAddress = '%{Framed-IP-Address}', FramedIPv6Address = '%{Framed-IPv6-Address}', FramedIPv6Prefix = '%{Framed-IPv6-Prefix}', FramedInterfaceId = '%{Framed-Interface-Id}', DelegatedIPv6Prefix = '%{Delegated-IPv6-Prefix}' WHERE AcctUniqueId = '%{Acct-Unique-Session-ID}' AND AcctStopTime = 0" } stop { query = "UPDATE radacct SET AcctStopTime = DATEADD(SS, %{%{integer:Event-Timestamp}:-%l}, '19700101'), AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = convert(bigint, '%{%{Acct-Input-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Input-Octets}:-0}', AcctOutputOctets = convert(bigint, '%{%{Acct-Output-Gigawords}:-0}' * POWER(2.0, 32)) | '%{%{Acct-Output-Octets}:-0}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{%{Acct-Delay-Time}:-0}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-ID}' AND AcctStopTime = 0" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (userName, pass, reply, authdate) VALUES('%{User-Name}', '%{%{User-Password}:-CHAP-PASSWORD}', '%{reply:Packet-Type}', '%S.%{expr:%M / 1000}')" } } Could not link driver rlm_sql_freetds: /usr/lib/freeradius/rlm_sql_freetds.so: cannot open shared object file: No such file or directory Make sure it (and all its dependent libraries!) are in the search path of your system's ld /etc/freeradius/mods-enabled/sql[27]: Instantiation failed for module "sql"

2 3

Redis database
by Zubair Ayub 15 Apr '20

15 Apr '20

Hi All I need to know how to connect two different databases with one radius. Thanks Waiting for your response Get Outlook for Android<https://aka.ms/ghei36>

3 4

RE: mschap: ERROR: MS-CHAP2-Response is incorrect
by L.P.H. van Belle 15 Apr '20

15 Apr '20

Hai, Hm,, still.. whats in krb5.conf ? whats the default REALM and did you configure other (optional extra REALMS) and which REALM is set/used in smb.conf Also important, what is your running OS and samba version, you might have hit a bug from and older samba version. That might help me a bit. Greetz, Louis Van: Jon Ander MB [mailto:jonandermonleon@gmail.com] Verzonden: woensdag 15 april 2020 12:22 Aan: L.P.H. van Belle CC: FreeRadius users mailing list Onderwerp: Re: mschap: ERROR: MS-CHAP2-Response is incorrect Hi, Louis: Thanks for trying to help me. I made the changes you suggested on the mschap module and I still get the same error. Is it possible that the challenge hash is being created with the wrong domain? i.e.: some-user(a)somewhere.com instead of MailScanner heeft een e-mail met mogelijk een poging tot fraude gevonden van "somewhere.com" some-user(a)swhr.com ? (0) mschap: Creating challenge hash with username: some-user(a)somewhere.com which might have to be something like: (0) mschap: Creating challenge hash with username: some-user(a)swhr.com What is weird is that local tests with standard tools succeed, but this other vendor's test does not. Regards On Wed, 15 Apr 2020 at 11:41, L.P.H. van Belle <belle(a)bazuin.nl> wrote: Hai Red, Well, almost.. you mist 1 part. This : Executing: /usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}: change that to : /usr/bin/ntlm_auth --allow-mschapv2 --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}: I even highlighted it in the samba wiki .. So edit : /etc/freeradius/3.0/sites-enabled/eduroam And correct that and try again. If it then still is not working, as extra you could try. Adduser freeradion to the winbind_priv group And check if apparmor is running and adjust the needed files there also. Greetz, Louis ________________________________ Van: Red Nano [mailto:r3dnano@gmail.com] Verzonden: woensdag 15 april 2020 11:27 Aan: FreeRadius users mailing list CC: L.P.H. van Belle Onderwerp: Re: mschap: ERROR: MS-CHAP2-Response is incorrect First of all: Thanks for the help. I've modified the smb.conf file according to the link you suggested. I'm trying to do the auth via ntlm_auth now and this is the response I got: (10) } # authorize = updated (10) Found Auth-Type = mschap (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/eduroam (10) Auth-Type mschap { (10) mschap: Creating challenge hash with username: some-user(a)somewhere.com (10) mschap: Client is using MS-CHAPv2 (10) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}: (10) mschap: EXPAND --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} (10) mschap: --> --username=some-user (10) mschap: Creating challenge hash with username: some-user(a)somewhere.com (10) mschap: EXPAND --challenge=%{%{mschap:Challenge}:-00} (10) mschap: --> --challenge=39258c5db7d3edb7 (10) mschap: EXPAND --nt-response=%{%{mschap:NT-Response}:-00} (10) mschap: --> --nt-response=1a16fe12fb9e1557724bf5a3aad065da38173340a65363ba (10) mschap: ERROR: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)' (10) mschap: External script failed (10) mschap: ERROR: External script says: The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d) (10) mschap: ERROR: MS-CHAP2-Response is incorrect (10) [mschap] = reject (10) } # Auth-Type mschap = reject (10) Failed to authenticate the user (10) Using Post-Auth-Type Reject maybe something to point out (which don't know if does matter) is that the user might be providing @somewhere.com, however, the AD domain name I have to do the queries against is really "swr.com" Operator name is @somewhere.com on the server config file so I can properly filter the local users, but the samba configuration and the domain is configured against the real domain name "swr.com"- could it be that the challenge hash is being wrongfuly created here?: (10) mschap: Creating challenge hash with username: some-user(a)somewhere.com And somehow, mschap should create the hash with "some-user(a)swe.com"? I sure don't have this issue when testing locally... I don't know if this makes sense--- On Wed, 15 Apr 2020 at 10:52, L.P.H. van Belle via Freeradius-Users <freeradius-users(a)lists.freeradius.org> wrote: That samba part is on the free radius site is obsolete Configure samba as a member server as shown here : Step 1. https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Domain_Member Then what most people dont see/forget is : https://wiki.samba.org/index.php/Idmap_config_rid This is oblicated.. If its only for authentication just use RID backend, thats fine. When thats done, go here. https://wiki.samba.org/index.php/Authenticating_Freeradius_against_Active_D… And verify your settings, this is the most important one for smb.conf ntlm auth = mschapv2-and-ntlmv2-only So all info to fix it is in this mail ;-) See how far you get, questions, mail again. Greetz, Louis > -----Oorspronkelijk bericht----- > Van: Freeradius-Users > [mailto:freeradius-users-bounces+belle <mailto:freeradius-users-bounces%2Bbelle> =bazuin.nl(a)lists.freerad > ius.org] Namens R3DNano > Verzonden: woensdag 15 april 2020 10:35 > Aan: FreeRadius users mailing list > Onderwerp: mschap: ERROR: MS-CHAP2-Response is incorrect > > I'm trying to deploy a FreeRADIUS server for eduroam authentication. > The local authentication source is a Microsoft AD that I configured > following this guide: > https://wiki.freeradius.org/guide/FreeRADIUS-Active-Directory- > Integration-HOWTO > The binding was successful and the eapol_test tests are all green too. > > However, I'm having a hard time implementing it with an > aerohive controller. > This controller has a "test" function which lets you input an > username and > a password and does who knows what in order to check the > radius server. > As far as I understood, it tries to do MSCHAPv2 without any > encryption as > per the logs I'll show below (please, correct me if I'm wrong) > Other than that, I receive an Access-Reject which looks like > is pointing at > a wrong password being provided, although, it is not the case > (checked the > password) > > This is what I see on the server side: > > (0) Received Access-Request Id 155 from MailScanner warning: numerical links are often malicious: MailScanner warning: numerical links are often malicious: 10.10.50.5:22074 <MailScanner warning: numerical links are often malicious: http://10.10.50.5:22074> to > MailScanner warning: numerical links are often malicious: MailScanner warning: numerical links are often malicious: 10.168.0.14:1812 <MailScanner warning: numerical links are often malicious: http://10.168.0.14:1812> > length 198 > (0) User-Name = "some-user(a)somewhere.com" > (0) Message-Authenticator = 0x021108ef4ce751de58540e09fc6d0147 > (0) Attr-26.26928.212 = 0x43382d36372d35452d35392d46462d4330 > (0) Service-Type = Authorize-Only > (0) NAS-Port = 0 > (0) NAS-Port-Type = Wireless-802.11 > (0) NAS-Identifier = "SOME_ID" > (0) NAS-IP-Address = 10.40.1.186 > (0) MS-CHAP-Challenge = 0x451507759c738d0d3792bb6474f55e88 > (0) MS-CHAP2-Response = > 0xcf0003d0a09c080f1f3981adf41050b91b960000000000000000c568a193 > 2f0abe2cf1f9908feb851dee780c95ccefcd6aca > (0) # Executing section authorize from file > /etc/freeradius/3.0/sites-enabled/eduroam > (0) authorize { > > [edited] > > (0) eap: No EAP-Message, not doing EAP > (0) [eap] = noop > (0) mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap' > (0) [mschap] = ok > > [edited, removed log entries] > > (0) } # authorize = updated > (0) Found Auth-Type = mschap > (0) # Executing group from file > /etc/freeradius/3.0/sites-enabled/eduroam > (0) Auth-Type mschap { > (0) mschap: Creating challenge hash with username: > some-user(a)somewhere.com > (0) mschap: Client is using MS-CHAPv2 > (0) mschap: EXPAND %{Stripped-User-Name} > (0) mschap: --> some-user > rlm_mschap (mschap): Closing connection (0): Hit > idle_timeout, was idle for > 2240 seconds > rlm_mschap (mschap): Closing connection (1): Hit > idle_timeout, was idle for > 2240 seconds > rlm_mschap (mschap): Closing connection (2): Hit > idle_timeout, was idle for > 2240 seconds > rlm_mschap (mschap): You probably need to lower "min" > rlm_mschap (mschap): Closing connection (3): Hit > idle_timeout, was idle for > 2240 seconds > rlm_mschap (mschap): You probably need to lower "min" > rlm_mschap (mschap): Closing connection (4): Hit > idle_timeout, was idle for > 2240 seconds > rlm_mschap (mschap): You probably need to lower "min" > rlm_mschap (mschap): 0 of 0 connections in use. You may > need to increase > "spare" > rlm_mschap (mschap): Opening additional connection (5), 1 of > 32 pending > slots used > rlm_mschap (mschap): Reserved connection (5) > (0) mschap: sending authentication request user='some-user' domain=' > SOMEWHERE.COM' > rlm_mschap (mschap): Released connection (5) > Need 2 more connections to reach min connections (3) > rlm_mschap (mschap): Opening additional connection (6), 1 of > 31 pending > slots used > (0) mschap: ERROR: When trying to update a password, this > return status > indicates that the value provided as the current password is > not correct. > [0xC000006A] > (0) mschap: ERROR: MS-CHAP2-Response is incorrect > (0) [mschap] = reject > (0) } # Auth-Type mschap = reject > (0) Failed to authenticate the user > (0) Using Post-Auth-Type Reject > > [edited, removed log entries] > > (0) } # Post-Auth-Type REJECT = updated > (0) Sent Access-Reject Id 155 from MailScanner warning: numerical links are often malicious: MailScanner warning: numerical links are often malicious: 10.168.0.14:1812 <MailScanner warning: numerical links are often malicious: http://10.168.0.14:1812> to > MailScanner warning: numerical links are often malicious: MailScanner warning: numerical links are often malicious: 10.10.50.5:22074 <MailScanner warning: numerical links are often malicious: http://10.10.50.5:22074> > length 0 > (0) MS-CHAP-Error = "\317E=691 R=1 > C=e7b3f200a3c36896f32a2ecf4adaab39 V=3 > M=Authentication rejected" > (0) Finished request > > > > I edited the linelog parts out - yes there's only one single > request (0) > Although, It does have an "Authorize-Only" value, which makes > me think this > test only does authorization but no authentication and that's > why the test > fails?? - any help trying to interpret and troubleshoot this > issue would be > welcome. > > Thanks. > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html -- --- Jon Ander Monleón Besteiro ---

2 2

mschap: ERROR: MS-CHAP2-Response is incorrect
by R3DNano 15 Apr '20

15 Apr '20

I'm trying to deploy a FreeRADIUS server for eduroam authentication. The local authentication source is a Microsoft AD that I configured following this guide: https://wiki.freeradius.org/guide/FreeRADIUS-Active-Directory-Integration-H… The binding was successful and the eapol_test tests are all green too. However, I'm having a hard time implementing it with an aerohive controller. This controller has a "test" function which lets you input an username and a password and does who knows what in order to check the radius server. As far as I understood, it tries to do MSCHAPv2 without any encryption as per the logs I'll show below (please, correct me if I'm wrong) Other than that, I receive an Access-Reject which looks like is pointing at a wrong password being provided, although, it is not the case (checked the password) This is what I see on the server side: (0) Received Access-Request Id 155 from 10.10.50.5:22074 to 10.168.0.14:1812 length 198 (0) User-Name = "some-user(a)somewhere.com" (0) Message-Authenticator = 0x021108ef4ce751de58540e09fc6d0147 (0) Attr-26.26928.212 = 0x43382d36372d35452d35392d46462d4330 (0) Service-Type = Authorize-Only (0) NAS-Port = 0 (0) NAS-Port-Type = Wireless-802.11 (0) NAS-Identifier = "SOME_ID" (0) NAS-IP-Address = 10.40.1.186 (0) MS-CHAP-Challenge = 0x451507759c738d0d3792bb6474f55e88 (0) MS-CHAP2-Response = 0xcf0003d0a09c080f1f3981adf41050b91b960000000000000000c568a1932f0abe2cf1f9908feb851dee780c95ccefcd6aca (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/eduroam (0) authorize { [edited] (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap' (0) [mschap] = ok [edited, removed log entries] (0) } # authorize = updated (0) Found Auth-Type = mschap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/eduroam (0) Auth-Type mschap { (0) mschap: Creating challenge hash with username: some-user(a)somewhere.com (0) mschap: Client is using MS-CHAPv2 (0) mschap: EXPAND %{Stripped-User-Name} (0) mschap: --> some-user rlm_mschap (mschap): Closing connection (0): Hit idle_timeout, was idle for 2240 seconds rlm_mschap (mschap): Closing connection (1): Hit idle_timeout, was idle for 2240 seconds rlm_mschap (mschap): Closing connection (2): Hit idle_timeout, was idle for 2240 seconds rlm_mschap (mschap): You probably need to lower "min" rlm_mschap (mschap): Closing connection (3): Hit idle_timeout, was idle for 2240 seconds rlm_mschap (mschap): You probably need to lower "min" rlm_mschap (mschap): Closing connection (4): Hit idle_timeout, was idle for 2240 seconds rlm_mschap (mschap): You probably need to lower "min" rlm_mschap (mschap): 0 of 0 connections in use. You may need to increase "spare" rlm_mschap (mschap): Opening additional connection (5), 1 of 32 pending slots used rlm_mschap (mschap): Reserved connection (5) (0) mschap: sending authentication request user='some-user' domain=' SOMEWHERE.COM' rlm_mschap (mschap): Released connection (5) Need 2 more connections to reach min connections (3) rlm_mschap (mschap): Opening additional connection (6), 1 of 31 pending slots used (0) mschap: ERROR: When trying to update a password, this return status indicates that the value provided as the current password is not correct. [0xC000006A] (0) mschap: ERROR: MS-CHAP2-Response is incorrect (0) [mschap] = reject (0) } # Auth-Type mschap = reject (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject [edited, removed log entries] (0) } # Post-Auth-Type REJECT = updated (0) Sent Access-Reject Id 155 from 10.168.0.14:1812 to 10.10.50.5:22074 length 0 (0) MS-CHAP-Error = "\317E=691 R=1 C=e7b3f200a3c36896f32a2ecf4adaab39 V=3 M=Authentication rejected" (0) Finished request I edited the linelog parts out - yes there's only one single request (0) Although, It does have an "Authorize-Only" value, which makes me think this test only does authorization but no authentication and that's why the test fails?? - any help trying to interpret and troubleshoot this issue would be welcome. Thanks.

3 4

WEB Login fails occasionally even though radius authentication succeed
by Rajesh Subramanian 13 Apr '20

13 Apr '20

Hello all, I am using PAM radius module version 1.4.1 Testing sample: PAM radius does not support authorization. I DO NOT require accounting and authorization and have kept the return types as optional. Configure radius server and trying to login using radius users. Syslog is enabled Scenario 1: The following is the configuration inside /etc/pam.d/ # cat ssh auth sufficient /lib/security/pam_radius_auth.so debug account optional /lib/security/pam_radius_auth.so debug session optional /lib/security/pam_radius_auth.so debug auth required /lib/security/pam_unix.so use_first_pass account optional /lib/security/pam_unix.so use_first_pass session optional /lib/security/pam_unix.so use_first_pass # cat php auth required /lib/security/pam_succeed_if.so user != root quiet auth sufficient /lib/security/pam_radius_auth.so debug account optional /lib/security/pam_radius_auth.so debug session optional /lib/security/pam_radius_auth.so debug auth required /lib/security/pam_unix.so use_first_pass account optional /lib/security/pam_unix.so use_first_pass session optional /lib/security/pam_unix.so use_first_pass SSH - Always successful WEB - Sometimes, the login fails (NOT always) The following are noticed during the failure scenarios 1. Radius authentication always succeeds and final SYSLOG from radius module received is *USER.DEBUG. php: pam_radius_auth: authentication succeeded* 2. After this, the following SYSLOG is seen and login failed *AUTHPRIV.WARNING. php: pam_unix(php:auth): check pass; user unknownAUTHPRIV.NOTICE. php: pam_unix(php:auth): authentication failure, logname= uid=0 euid=0 tty= ruser= rhost=<IP address>* Scenario 2: I did the following changes with respect to the configuration to skip pam_unix and depend on pam_radius only. # cat ssh auth sufficient /lib/security/pam_radius_auth.so debug account optional /lib/security/pam_radius_auth.so debug session optional /lib/security/pam_radius_auth.so debug # cat php auth required /lib/security/pam_succeed_if.so user != root quiet auth sufficient /lib/security/pam_radius_auth.so debug account optional /lib/security/pam_radius_auth.so debug session optional /lib/security/pam_radius_auth.so debug SSH - Always successful WEB - Sometimes, the login fails (NOT always) The following are noticed during the failure scenarios 1. Radius authentication always succeeds and final SYSLOG from radius module received is *USER.DEBUG. php: pam_radius_auth: authentication succeeded* 2. After this, there are no SYSLOG messages In both cases, login fails sometimes and only through a WEB interface. Could you please provide any suggestions on the above? Why is the user unknown in scenario 1 Thanks, Rajesh

2 1

free radius 3.0. 21 on rhel site for download
by saurav jalan 13 Apr '20

13 Apr '20

Hi When we can expect official release of free radius 3.0.21 on rhel site for download . Thanks & Regards Saurav jalan

2 1

Remove mariadb - connector - free version
by saurav jalan 13 Apr '20

13 Apr '20

Hi Why mariadb-connector-c.x86_64 dependency is remove from free radius version 3.0.21 . Any bug was there in the previous version . Thanks & Regards Saurav jalan

1 0

freeradius-mysql dependent rpm
by saurav jalan 13 Apr '20

13 Apr '20

Hi Why mariadb-connector-c.x86_64 is the dependent rpm for freeradius-mysql-3.0.17-6 . Any reason for that , in earlier version of freeradius-mysql-2.X.X mariadb connector is not required . Thanks & Regards Saurav jalan

1 0

Same IP for different Users
by Aurélio de Souza Ribeiro Neto 12 Apr '20

12 Apr '20

Hi Everyone, Happy easter to all!! I´m using Freeradius 3.0.20 and MySQL. Sometimes, I think in NAS fault or packet loss, I have same IP for 2 different users. Any hint? Thanks Aurélio

2 1