- Freeradius-Users - lists.freeradius.org

MAC authorisation (but not authentication) via LDAP
by Martin Whinnery 11 Apr '07

11 Apr '07

Hi. Probly just me not understanding... What I want is for our switches to only allow access to MAC addresses in our LDAP database. I don't want to store passwords on our LDAP host entries. I'm set up to check LDAP during authorisation, and it correctly returns authorised / not authorised depending on whether the appropriate attribute contains the right value. The trouble comes with authentication - either I set Auth-Type := Accept, in which case and failed authorisation is overridden, or I allow authentication to carry on against LDAP ( or System, or whatever ), in which case it fails always and access is denied, even for authorised MACs. Is there a way to make the Authorisation part final and authoritative? As I say, probly just being stoopid. Mart -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

4 12

Problem with mschap, ntlm_auth and a conditional syntax
by latin＠icis.pcz.pl 11 Apr '07

11 Apr '07

Hello, I use ntlm_auth in mschapv2 (freeradius 20070409) by the following line in radiusd.conf: ntlm_auth = "/usr/local/eduroam/progs/ntlm/ntlm_auth.pl --request-nt-key --username=%{Stripped-User-Name:-%{User-Name:-None}} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" A corresponding part of debug from radiusd -X is: rlm_mschap: Told to do MS-CHAPv2 for uzyszkodnik(a)latin.pcz.pl with NT-Password radius_xlat: '--username=uzyszkodnik' radius_xlat: Running registered xlat function of module mschap for string 'Challenge:-00' rlm_mschap: Unknown expansion string "Challenge:-00" radius_xlat: '--challenge=' radius_xlat: Running registered xlat function of module mschap for string 'NT-Response:-00' rlm_mschap: Unknown expansion string "NT-Response:-00" radius_xlat: '--nt-response=' Exec-Program output: Specify all required command line parameters! Exec-Program-Wait: plaintext: Specify all required command line parameters! Exec-Program: returned: 1 When I remove conditional syntax: ntlm_auth = "/usr/local/eduroam/progs/ntlm/ntlm_auth.pl --request-nt-key --username=%{Stripped-User-Name:-%{User-Name:-None}} --challenge=%{mschap:Challenge} --nt-response=%{mschap:NT-Response}" an athentication operates correctly: rlm_mschap: Told to do MS-CHAPv2 for uzyszkodnik(a)latin.pcz.pl with NT-Password radius_xlat: '--username=uzyszkodnik' radius_xlat: Running registered xlat function of module mschap for string 'Challenge' mschap2: ca radius_xlat: '--challenge=1d6796d06b4bab53' radius_xlat: Running registered xlat function of module mschap for string 'NT-Response' radius_xlat: '--nt-response=69bbd30b6a06d6be5cc2fb88c658c1582da5a8a91ebcbee8' Exec-Program output: NT_KEY: 9d1f2ebc255b18c110a446e5de42389e NT_KEY: 9D1F2EBC255B18C110A446E5DE42389E Exec-Program-Wait: plaintext: NT_KEY: 9d1f2ebc255b18c110a446e5de42389e NT_KEY: 9D1F2EBC255B18C110A446E5DE42389E Exec-Program: returned: 0 I tested freeradius 1.1.4 with conditional syntax: ntlm_auth = "/usr/local/eduroam/progs/ntlm/ntlm_auth.pl --request-nt-key --username=%{Stripped-User-Name:-%{User-Name:-None}} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" It's OK: rlm_mschap: Told to do MS-CHAPv2 for uzyszkodnik(a)latin.pcz.pl with NT-Password radius_xlat: '--username=uzyszkodnik' radius_xlat: Running registered xlat function of module mschap for string 'Challenge' mschap2: af radius_xlat: '--challenge=eebe17185aaa4366' radius_xlat: Running registered xlat function of module mschap for string 'NT-Response' radius_xlat: '--nt-response=f668c0b7b4e32deeb49529c2f3295699561589836d73f474' Exec-Program output: NT_KEY: 9d1f2ebc255b18c110a446e5de42389e NT_KEY: 9D1F2EBC255B18C110A446E5DE42389E Exec-Program-Wait: plaintext: NT_KEY: 9d1f2ebc255b18c110a446e5de42389e NT_KEY: 9D1F2EBC255B18C110A446E5DE42389E Exec-Program: returned: 0 Lukasz Lacinski

3 4

1.1.5 double free or corruption
by Thor Spruyt 10 Apr '07

10 Apr '07

Hi, I have built freeradius-1.1.5 with mysql, ldap and openssl on CentOS 4.4 Everything looks ok (configure, make, make install), but when running the server, it dies. [thor@byze freeradius-1.1.5]$ sudo /opt/freeradius-1.1.5-1/sbin/radiusd -X Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /opt/freeradius-1.1.5-1/etc/raddb/proxy.conf Config: including file: /opt/freeradius-1.1.5-1/etc/raddb/clients.conf Config: including file: /opt/freeradius-1.1.5-1/etc/raddb/snmp.conf Config: including file: /opt/freeradius-1.1.5-1/etc/raddb/eap.conf Config: including file: /opt/freeradius-1.1.5-1/etc/raddb/sql.conf main: prefix = "/opt/freeradius-1.1.5-1" main: localstatedir = "/opt/freeradius-1.1.5-1/var" main: logdir = "/opt/freeradius-1.1.5-1/var/log/radius" main: libdir = "/opt/freeradius-1.1.5-1/lib" main: radacctdir = "/opt/freeradius-1.1.5-1/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/opt/freeradius-1.1.5-1/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/opt/freeradius-1.1.5-1/var/run/radiusd/radiusd.pid" main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/opt/freeradius-1.1.5-1/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /opt/freeradius-1.1.5-1/lib *** glibc detected *** double free or corruption (fasttop): 0x098a55d8 *** Aborted If it helps, here's the end of an strace: open("/opt/freeradius-1.1.5-1/etc/raddb/realms", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0640, st_size=187, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f76000 read(3, "#\n#\tTHIS FILE IS DEPRECATED.\n#\n#"..., 4096) = 187 read(3, "", 4096) = 0 close(3) = 0 munmap(0xb7f76000, 4096) = 0 getrlimit(RLIMIT_CORE, {rlim_cur=0, rlim_max=RLIM_INFINITY}) = 0 stat64("/opt/freeradius-1.1.5-1/var/log/radius", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0 getgid32() = 0 open("/etc/services", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=20373, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f76000 read(3, "# /etc/services:\n# $Id: services"..., 4096) = 4096 read(3, "123/tcp\nntp\t\t123/udp\t\t\t\t# Networ"..., 4096) = 4096 read(3, "\t\t873/tcp\t\t\t\t# rsync\nrsync\t\t873/"..., 4096) = 4096 close(3) = 0 munmap(0xb7f76000, 4096) = 0 socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 3 bind(3, {sa_family=AF_INET, sin_port=htons(1812), sin_addr=inet_addr("0.0.0.0")}, 16) = 0 socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4 bind(4, {sa_family=AF_INET, sin_port=htons(1813), sin_addr=inet_addr("0.0.0.0")}, 16) = 0 time(NULL) = 1173470425 write(1, "radiusd: entering modules setup"..., 33radiusd: entering modules setup ) = 33 time(NULL) = 1173470425 write(1, "Module: Library search path is /"..., 59Module: Library search path is /opt/freeradius-1.1.5-1/lib ) = 59 open("/opt/freeradius-1.1.5-1/lib/rlm_exec.la", O_RDONLY) = 5 fstat64(5, {st_mode=S_IFREG|0755, st_size=895, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f76000 read(5, "# rlm_exec.la - a libtool librar"..., 4096) = 895 read(5, "", 4096) = 0 close(5) = 0 munmap(0xb7f76000, 4096) = 0 futex(0xa98060, FUTEX_WAKE, 2147483647) = 0 open("/opt/freeradius-1.1.5-1/lib/rlm_exec.a", O_RDONLY) = 5 read(5, "!<arch>\n/ 11734703"..., 512) = 512 close(5) = 0 open("/opt/freeradius-1.1.5-1/lib/rlm_exec-1.1.5.so", O_RDONLY) = 5 read(5, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\270\10"..., 512) = 512 fstat64(5, {st_mode=S_IFREG|0755, st_size=17018, ...}) = 0 old_mmap(NULL, 9308, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 5, 0) = 0xf7a000 old_mmap(0xf7c000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 5, 0x1000) = 0xf7c000 close(5) = 0 open("/dev/tty", O_RDWR|O_NONBLOCK|O_NOCTTY) = 5 writev(5, [{"*** glibc detected *** ", 23}, {"double free or corruption (fastt"..., 35}, {": 0x", 4}, {"080f95d8", 8}, {" ***\n", 5}], 5*** glibc detected *** double free or corruption (fasttop): 0x080f95d8 *** ) = 75 rt_sigprocmask(SIG_UNBLOCK, [ABRT], NULL, 8) = 0 tgkill(26392, 26392, SIGABRT) = 0 --- SIGABRT (Aborted) @ 0 (0) --- +++ killed by SIGABRT +++ Process 26392 detached -- Thor Spruyt M: +32 475 67 22 65 E: thor.spruyt(a)telenet.be W: www.thor-spruyt.com

3 3

Re: freeradius with samba domain and port-access (Christian)
by Christian Hohmann 10 Apr '07

10 Apr '07

Christian Hohmann wrote: >> Now the Problem: Some workstations are added to a samba managed domain and can only login on the samba service. >> It seems to me, that the winxpsp2 supplicant first wants to authenticate at the samba server. But the switch doesn?t allow the connection, because the port is closed until the eap-authentication is handled. >The machines also need to log in using EAP. >Alan DeKok. Thanks for help. I think so too, but I have no idea how or even if it is possible. The WXPSP2 Client with user authentication is not able to authanticate against the freeradius. There is not even a request arriving on the freeradius. If I toggle to "Identify with ComputerInformation if possible" there is at least a request arriving at the radiusserver. It takes some time, but it works. After the Authentication with computer Information, its not possible to authenticate a second time with the user information. How do i have to configure the client correctly to realize userauthentication? Or do I need to reconfigure the server? Regards - Christian _______________________________________________________________ SMS schreiben mit WEB.DE FreeMail - einfach, schnell und kostenguenstig. Jetzt gleich testen! http://f.web.de/?mc=021192

3 2

two database
by Nirmal 10 Apr '07

10 Apr '07

Hi i m using freeradius 0.9 is it possible to select two sql databases in sql.conf ? how ? Thanks In Advance Regards Nirmal Patel 9323704733 --------------------------------- TV dinner still cooling? Check out "Tonight's Picks" on Yahoo! TV.

4 9

JRS - Proxying v2
by Arran Cudbard-Bell 10 Apr '07

10 Apr '07

Hi Alan, Just to make sure i've got the right idea about v2 realms. Here is an example config for the Janet Roaming Service, which allows users at any academic institution in the UK to authenticate at any other . The version 1 realm JRS realm jrs { type = RADIUS authhost = roaming1.ja.net:1812 accthost = roaming2.ja.net:1813 secret = theirsecret nostrip ldflag = round_robin } realm jrs { type = RADIUS authhost = roaming2.ja.net:1812 accthost = roaming2.ja.net:1813 secret = theirsecret nostrip ldflag = round_robin } The version 2 realm JRS ############## # Server Pools # realm jrs { auth_pool = jrs_auth_balance acct_pool = jrs_acct_balance nostrip } ############## # Server Pools # server_pool jrs_auth_balance { home_server = jrs1_auth home_server = jrs2_auth type = load-balance } server_pool jrs_acct_balance { home_server = jrs1_auth home_server = jrs2_auth type = load-balance } ############## # Home Servers home_server jrs1_auth { type = auth hostname = roaming1.ja.net port = 1812 secret = theirsecret response_window = 20 zombie_period = 40 revive_interval = 120 ping_check = request ping_interval = 30 num_pings_to_alive = 3 } home_server jrs1_acct { type = acct hostname = roaming1.ja.net port = 1813 secret = theirsecret response_window = 20 zombie_period = 40 revive_interval = 120 ping_check = request ping_interval = 30 num_pings_to_alive = 3 } home_server jrs2_auth { type = auth hostname = roaming2.ja.net port = 1812 secret = theirsecret response_window = 20 zombie_period = 40 revive_interval = 120 ping_check = request ping_interval = 30 num_pings_to_alive = 3 } home_server jrs2_acct { type = acct hostname = roaming1.ja.net port = 1813 secret = theirsecret response_window = 20 zombie_period = 40 revive_interval = 120 ping_check = request ping_interval = 30 num_pings_to_alive = 3 } Very long, but I can see the advantages :) Thanks, Arran

3 19

freeradius mssql problem
by satish patel 10 Apr '07

10 Apr '07

Dear I have many time posted question about freeradius mssql but i didnt get any satisfied ans i am again going to explain my problem i have freeradius version 1.1.0 with runing mssql windows and problem is acct-stop packet i have cisco NAS vpdn configuration users login and start recored is updated but some time when everything runing and my radius goes down due to power failure but my sql on UPS now when i restart my radius and i run radutmp there is list of users but in cisco router there is no one users now user try to login they got error max 1 login i got it this is the error of radutmp now i delete this file and users again able to login but some users stop account not updated so i got this error Mon Mar 12 14:55:43 2007 : Error: rlm_sql (sql): Couldn't insert SQL accounting STOP record - 00000 Mon Mar 12 14:55:48 2007 : Error: rlm_sql_unixodbc: '22007 [unixODBC][FreeTDS][SQL Server]Syntax error converting datetime from character string.i?' Mon Mar 12 14:55:48 2007 : Error: rlm_sql (sql): Couldn't insert SQL accounting STOP record - 00000 Mon Mar 12 14:55:53 2007 : Error: rlm_sql_unixodbc: '22007 [unixODBC][FreeTDS][SQL Server]Syntax error converting datetime from character string.' Mon Mar 12 14:55:53 2007 : Error: rlm_sql (sql): Couldn't insert SQL accounting STOP record - 00000 is there any solution about this type of error $ cat ~/satish/url.txt System administrator ( Data Center ) please visit this site http://linux.tulipit.com --------------------------------- Check out what you're missing if you're not on Yahoo! Messenger

1 0

freeradius with samba domain and port-access
by Christian Hohmann 10 Apr '07

10 Apr '07

Dear List-Members, Im trying to setup a port access control using freeradius, but I cant succeed so far. Im looking for a solution fitting the following points: Port authentication trough an hp switch, dynamic vlan assignment by the freeradius server. I solved the problem for clients that have a local account. The freeradius deals with peap + mschapv2 and the passwords are located in the users file. Later the smbpasswd file should be used. The Switch is configured for port-access-authentication and the ports are closed until the supplicant has authenticated correctly. The winxpsp2 clients are configured to use their login names and password for authentication. Now the Problem: Some workstations are added to a samba managed domain and can only login on the samba service. It seems to me, that the winxpsp2 supplicant first wants to authenticate at the samba server. But the switch doesnt allow the connection, because the port is closed until the eap-authentication is handled. I really hope that you can give me a hint. Regards - Christian _______________________________________________________________ SMS schreiben mit WEB.DE FreeMail - einfach, schnell und kostenguenstig. Jetzt gleich testen! http://f.web.de/?mc=021192

2 1

freeradiusd segfaulting on HUP (check_crl enabled)
by inverse 10 Apr '07

10 Apr '07

Hi, I'll describe the problem as it appears from my side: radiusd server with EAP-TLS and certificate revocation list implenented, the server also logs to a remote mysql server. The CRL is updated at least twice a day, so the requirement is to reload the list with a minimum downtime. As a side note, the large number of mysql connections and max requests you see is there for a stress test, which isn't being performed right now. Sending a SIGHUP invariably segfaults the radiusd process (using debug_level=2 improves things a little when running in debug mode, otherwise radiusd won't even attempt to reload the clients). This test has been run as follows (secrets removed): eap.conf configured as: #password not displayed here private_key_file = ${raddbdir}/certs/newkey.pem certificate_file = ${raddbdir}/certs/newserv.pem CA_file = ${raddbdir}/certs/crl/root.pem CA_path = ${raddbdir}/certs/crl dh_file = ${raddbdir}/certs/dh random_file = ${raddbdir}/certs/random check_cert_cn = %{User-Name} check_crl = yes latest (today's freeradius-server-snapshot-20070410) freeradius CVS snapshot compiled against the latest openssl shared libraries as you can see below: [root@radius freeradius-server-snapshot-20070410]# openssl version OpenSSL 0.9.8e 23 Feb 2007 [root@radius freeradius-server-snapshot-20070410]# vi /usr/local/etc/raddb/radiusd.conf #added the debug_level=2 line... #let's rock: #note similar segfaults occur when using other freradius versions, like those officially available to RHEL4 and 5 distros (RHAS4 and 5 too...) #Output follows: [root@radius freeradius-server-snapshot-20070410]# radiusd -X & [1] 17825 [root@radius freeradius-server-snapshot-20070410]# Config: including file: /usr/local/etc/raddb/radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf Config: including file: /usr/local/etc/raddb/sql/mysql-dialup.conf FreeRADIUS Version 2.0.0-pre0, for host i686-pc-linux-gnu, built on Apr 10 2007 at 11:00:16 Starting - reading configuration files ... read_config_files: reading dictionary main: prefix = "/usr/local" main: localstatedir = "/usr/local/var" main: logdir = "/usr/local/var/log/radius" main: libdir = "/usr/local/lib" main: radacctdir = "/usr/local/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 65536 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/local/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid" main: user = "root" main: group = "root" main: checkrad = "/usr/local/sbin/checkrad" main: debug_level = 2 main: proxy_requests = no log: syslog_facility = "daemon" proxy server: retry_delay = 5 proxy server: retry_count = 3 proxy server: default_fallback = yes proxy server: dead_time = 120 proxy server: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = yes realm LOCAL: ldflag = fail_over realm ****.**: nostrip realm ****.**: ldflag = fail_over realm ****.****.**: nostrip realm ****.****.**: ldflag = fail_over realm ****.****.**: nostrip realm ****.****.**: ldflag = fail_over main: port = 1812 listen: type = "auth" listen: ipaddr = * listen: port = 0 listen: type = "acct" listen: ipaddr = * listen: port = 0 client 127.0.0.1: secret = "testing123" client 127.0.0.1: shortname = "localhost" client 127.0.0.1: nastype = "other" ****LIST OF OTHER CLIENTS AND SECRETS REMOVED**** radiusd: entering modules setup Module: Library search path is /usr/local/lib modules: Not loading pre-proxy{} section modules: Not loading post-proxy{} section Module: Loaded exec exec: wait = yes exec: input_pairs = "request" exec: shell_escape = yes rlm_exec: wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded expiration expiration: reply-message = "Password Has Expired " Module: Instantiated expiration (expiration) Module: Loaded logintime logintime: reply-message = "You are calling outside your allowed timespan " logintime: minimum-timeout = 60 Module: Instantiated logintime (logintime) Module: Loaded PAP pap: encryption_scheme = "auto" pap: auto_header = no Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = yes mschap: require_strong = yes mschap: with_ntdomain_hack = no Module: Instantiated mschap (mschap) Module: Loaded LDAP ldap: server = "*****.**" ldap: port = 636 ldap: password = "****" ldap: identity = "cn=***,ou=***,dc=****,dc=**" ldap: net_timeout = 1 ldap: timeout = 4 ldap: timelimit = 3 ldap: tls_mode = no ldap: start_tls = no ldap: tls_require_cert = "allow" tls: start_tls = no tls: require_cert = "allow" ldap: basedn = "dc=unimib,dc=it" ldap: filter = "(uid=%u)" ldap: base_filter = "(objectclass=radiusprofile)" ldap: auto_header = yes ldap: access_attr_used_for_allow = yes ldap: groupname_attribute = "cn" ldap: groupmembership_filter = "(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))" ldap: dictionary_mapping = "/usr/local/etc/raddb/ldap.attrmap" ldap: ldap_debug = 0 ldap: ldap_connections_number = 5 ldap: compare_check_items = no ldap: do_xlat = yes ldap: set_auth_type = yes rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /usr/local/etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message conns: 0x9a6e170 Module: Instantiated ldap (ldap) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "/usr/local/etc/raddb/certs/crl" tls: pem_file_type = yes tls: private_key_file = "/usr/local/etc/raddb/certs/newkey.pem" tls: certificate_file = "/usr/local/etc/raddb/certs/newserv.pem" tls: CA_file = "/usr/local/etc/raddb/certs/crl/root.pem" tls: private_key_password = "*********" tls: dh_file = "/usr/local/etc/raddb/certs/dh" tls: random_file = "/usr/local/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = yes tls: check_cert_cn = "%{User-Name}" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" preprocess: hints = "/usr/local/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded detail detail auth_log: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d" detail auth_log: header = "%t" detail auth_log: detailperm = 384 detail auth_log: dirperm = 493 detail auth_log: locking = no detail auth_log: log_packet_header = no Module: Instantiated detail (auth_log) Module: Loaded realm realm suffix: format = "suffix" realm suffix: delimiter = "@" realm suffix: ignore_default = no realm suffix: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/usr/local/etc/raddb/users" files: acctusersfile = "/usr/local/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: header = "%t" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no detail: log_packet_header = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/usr/local/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Module: Loaded SQL sql: driver = "rlm_sql_mysql" sql: server = "*******.****.**" sql: port = "" sql: login = "radius" sql: password = "************" sql: radius_db = "radius" sql: sqltrace = no sql: sqltracefile = "/usr/local/var/log/radius/sqltrace.sql" sql: readclients = no sql: deletestalesessions = yes sql: num_sql_socks = 20 sql: sql_user_name = "%{User-Name}" sql: default_user_profile = "" sql: nas_query = "SELECT id, nasname, shortname, type, secret FROM nas" sql: authorize_check_query = "SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id" sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id" sql: authorize_group_check_query = "SELECT id, GroupName, Attribute, Value, op FROM radgroupcheck WHERE GroupName = '%{Sql-Group}' ORDER BY id" sql: authorize_group_reply_query = "SELECT id, GroupName, Attribute, Value, op FROM radgroupreply WHERE GroupName = '%{Sql-Group}' ORDER BY id" sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = %{Acct-Delay-Time:-0} WHERE AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'" sql: accounting_update_query = "UPDATE radacct SET FramedIPAddress = '%{Framed-IP-Address}', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress= '%{NAS-IP-Address}'" sql: accounting_update_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0')" sql: accounting_start_query = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay, MyLocalTimestamp) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0', '%S');" sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S', AcctStartDelay = '%{Acct-Delay-Time:-0}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" sql: accounting_stop_query = "UPDATE radacct SET TerminationTime = FROM_UNIXTIME(%{Acct-Session-Time} + unix_timestamp(AcctStartTime)), AcctStopTime = '%S', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')" sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE UserName = '%{SQL-User-Name}' ORDER BY priority" sql: connect_failure_retry_delay = 60 sql: simul_count_query = "SELECT COUNT(*) FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0" sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0" sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply, date) values ('', '%{User-Name}', '%{User-Password:-Chap-Password}', '%{reply:Packet-Type}', '%S')" sql: safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to radius@cash.si.unimib.it:/radius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 rlm_sql (sql): starting 5 rlm_sql (sql): Attempting to connect rlm_sql_mysql #5 rlm_sql_mysql: Starting connect to MySQL server for #5 rlm_sql (sql): Connected new DB handle, #5 rlm_sql (sql): starting 6 rlm_sql (sql): Attempting to connect rlm_sql_mysql #6 rlm_sql_mysql: Starting connect to MySQL server for #6 rlm_sql (sql): Connected new DB handle, #6 rlm_sql (sql): starting 7 rlm_sql (sql): Attempting to connect rlm_sql_mysql #7 rlm_sql_mysql: Starting connect to MySQL server for #7 rlm_sql (sql): Connected new DB handle, #7 rlm_sql (sql): starting 8 rlm_sql (sql): Attempting to connect rlm_sql_mysql #8 rlm_sql_mysql: Starting connect to MySQL server for #8 rlm_sql (sql): Connected new DB handle, #8 rlm_sql (sql): starting 9 rlm_sql (sql): Attempting to connect rlm_sql_mysql #9 rlm_sql_mysql: Starting connect to MySQL server for #9 rlm_sql (sql): Connected new DB handle, #9 rlm_sql (sql): starting 10 rlm_sql (sql): Attempting to connect rlm_sql_mysql #10 rlm_sql_mysql: Starting connect to MySQL server for #10 rlm_sql (sql): Connected new DB handle, #10 rlm_sql (sql): starting 11 rlm_sql (sql): Attempting to connect rlm_sql_mysql #11 rlm_sql_mysql: Starting connect to MySQL server for #11 rlm_sql (sql): Connected new DB handle, #11 rlm_sql (sql): starting 12 rlm_sql (sql): Attempting to connect rlm_sql_mysql #12 rlm_sql_mysql: Starting connect to MySQL server for #12 rlm_sql (sql): Connected new DB handle, #12 rlm_sql (sql): starting 13 rlm_sql (sql): Attempting to connect rlm_sql_mysql #13 rlm_sql_mysql: Starting connect to MySQL server for #13 rlm_sql (sql): Connected new DB handle, #13 rlm_sql (sql): starting 14 rlm_sql (sql): Attempting to connect rlm_sql_mysql #14 rlm_sql_mysql: Starting connect to MySQL server for #14 rlm_sql (sql): Connected new DB handle, #14 rlm_sql (sql): starting 15 rlm_sql (sql): Attempting to connect rlm_sql_mysql #15 rlm_sql_mysql: Starting connect to MySQL server for #15 rlm_sql (sql): Connected new DB handle, #15 rlm_sql (sql): starting 16 rlm_sql (sql): Attempting to connect rlm_sql_mysql #16 rlm_sql_mysql: Starting connect to MySQL server for #16 rlm_sql (sql): Connected new DB handle, #16 rlm_sql (sql): starting 17 rlm_sql (sql): Attempting to connect rlm_sql_mysql #17 rlm_sql_mysql: Starting connect to MySQL server for #17 rlm_sql (sql): Connected new DB handle, #17 rlm_sql (sql): starting 18 rlm_sql (sql): Attempting to connect rlm_sql_mysql #18 rlm_sql_mysql: Starting connect to MySQL server for #18 rlm_sql (sql): Connected new DB handle, #18 rlm_sql (sql): starting 19 rlm_sql (sql): Attempting to connect rlm_sql_mysql #19 rlm_sql_mysql: Starting connect to MySQL server for #19 rlm_sql (sql): Connected new DB handle, #19 Module: Instantiated sql (sql) Module: Loaded attr_filter attr_filter attr_filter.accounting_response: attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" attr_filter attr_filter.accounting_response: key = "%{User-Name}" Module: Instantiated attr_filter (attr_filter.accounting_response) Initializing the thread pool... Listening on authentication address * port 1812 Listening on accounting address * port 1813 Ready to process requests. Nothing to do. Sleeping until we see a request. [root@radius freeradius-server-snapshot-20070410]# killall -HUP radiusd Config: including file: /usr/local/etc/raddb/radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf [root@radius freeradius-server-snapshot-20070410]# Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf Config: including file: /usr/local/etc/raddb/sql/mysql-dialup.conf FreeRADIUS Version 2.0.0-pre0, for host i686-pc-linux-gnu, built on Apr 10 2007 at 11:00:16 Reloading - reading configuration files... read_config_files: reading dictionary main: prefix = "/usr/local" main: localstatedir = "/usr/local/var" main: logdir = "/usr/local/var/log/radius" main: libdir = "/usr/local/lib" main: radacctdir = "/usr/local/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 65536 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/local/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid" main: user = "root" main: group = "root" main: checkrad = "/usr/local/sbin/checkrad" main: debug_level = 2 main: proxy_requests = no log: syslog_facility = "daemon" proxy server: retry_delay = 5 proxy server: retry_count = 3 proxy server: default_fallback = yes proxy server: dead_time = 120 proxy server: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = yes rlm_sql (sql): Closing sqlsocket 19 rlm_sql (sql): Closing sqlsocket 18 rlm_sql (sql): Closing sqlsocket 17 rlm_sql (sql): Closing sqlsocket 16 rlm_sql (sql): Closing sqlsocket 15 rlm_sql (sql): Closing sqlsocket 14 rlm_sql (sql): Closing sqlsocket 13 rlm_sql (sql): Closing sqlsocket 12 rlm_sql (sql): Closing sqlsocket 11 rlm_sql (sql): Closing sqlsocket 10 rlm_sql (sql): Closing sqlsocket 9 rlm_sql (sql): Closing sqlsocket 8 rlm_sql (sql): Closing sqlsocket 7 rlm_sql (sql): Closing sqlsocket 6 rlm_sql (sql): Closing sqlsocket 5 rlm_sql (sql): Closing sqlsocket 4 rlm_sql (sql): Closing sqlsocket 3 rlm_sql (sql): Closing sqlsocket 2 rlm_sql (sql): Closing sqlsocket 1 rlm_sql (sql): Closing sqlsocket 0 main: port = 1812 listen: type = "auth" listen: ipaddr = * listen: port = 0 listen: type = "acct" listen: ipaddr = * listen: port = 0 client 127.0.0.1: secret = "testing123" client 127.0.0.1: shortname = "localhost" client 127.0.0.1: nastype = "other" ***REMOVED REMAINDER OF CONFIGURED NAS / SECRETS*** [1]+ Segmentation fault radiusd -X [root@radius freeradius-server-snapshot-20070410]# radiusd -v radiusd: FreeRADIUS Version 2.0.0-pre0, for host i686-pc-linux-gnu, built on Apr 10 2007 at 11:00:16 Copyright (C) 2000-2003 The FreeRADIUS server project. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License. For more information about these matters, see the file named COPYRIGHT. Thanks in advance for your help/comments/insults for being Cpt. Obvious, Inverse

1 0

Very Newbie question
by Antuan Avdioukhine 10 Apr '07

10 Apr '07

Greetings! I'm very newbie in FreeRadius software. Now I have to setup FreeRadius server for dialup users billing. We have three categories of dialup users: 1. Traditional users, who authenticates itselves with login and password; some of them must have fixed IP. 2. Internal telephony network users, who have no registered login name (may authenticate with any login/password pairs); server must check caller-id of such users (which is subsituted to fixed one usind our phone station magic) as a part of authorization procedure. Accounting will be performed as an payed telephone call, no radius accounting will be performed. 3. Small group of users (about 10 ones) which passes by accounting schemes (admninistrators). For authentication, authorization and accounting of first category users custlom rlm by billing software vendor will be used. For third category users I'm planning to use users.conf. Now -- two questions. 1. Which authorization method should I use for second category users? Obviously I should use rlm_perl, but it seems to me quite unpractical to use perl for just compare one attribute with single string constant. 2. Second category users call most frequently, while third category users call very rarelly (about 2-3 calls per week). Is it significant during FR setup? -- Antuan Avdioukhine (DEKA-RIPE). Convey Plus Telecommunications St.Petersburg, Russia.

3 3