- Freeradius-Users - lists.freeradius.org

modify sql table structure for additional logging
by Cory Robson 05 Jan '07

05 Jan '07

Is it possible to modify the existing radacct table with some extra fields for logging. My upstream also sends Attr-151 X-Ascend-Session-Svr-Key which I would also like logged (its used for terminating a user if need be). I could use it in the unique session server key field instead of the calculated one but would need a step by step on how to go about that. Alternatively as stated above if I could add additional fields then I would also like to log the Ascend-Xmit-Rate & Ascend-data-rate into my database as well as the Ascend-Session-Server-Key. But I don't want to stuff up function ability with Dialup Admin. Thoughts and suggestions please

3 4

unsubscribe
by Cihan DEMİR 05 Jan '07

05 Jan '07

1 0

Freeradius and biometric devices
by Kenneth Penza 05 Jan '07

05 Jan '07

Hi, I am trying to setup a biometric authentication using freeradius, first the user gives his/her password and then uses fingerprint information. On positive matches the user is authenticated. Can it be implemented? Is there literature that I need to have a look at? Thanks in advance Kenneth ____________________________________________________________________________________ Need a quick answer? Get one in minutes from people who know. Ask your question on www.Answers.yahoo.com

7 11

Mac-Address authentication
by Harish Sharma 05 Jan '07

05 Jan '07

Hi I m running a radius server. Can anybody guide me to authentication based on userid+password+mac-address. What should be the entries in /etc/raddb/users file. Thanks Harish

2 2

RE: help
by John Wan 05 Jan '07

05 Jan '07

Hi Alan, Many thanks for your help. Now the kerberos service and the Samba service are running now, I have followed your instructions on your webpage, but I still have experenced the similar issue, please see the folloewing: [root@sun ~]# net join -U Administrator Administrator's password: [2007/01/05 10:10:15, 0] libads/kerberos.c:ads_kinit_password(146) kerberos_kinit_password Administrator(a)MBUS.LOCAL failed: Cannot find KDC for requested realm [2007/01/05 10:10:15, 0] utils/net_ads.c:ads_startup(186) ads_connect: Cannot find KDC for requested realm Joined domain MBUS. [root@sun ~]# wbinfo -a administrator%password plaintext password authentication failed Could not authenticate user administrator%password with plaintext password could not obtain winbind separator! could not obtain winbind domain name! challenge/response password authentication failed Could not authenticate user administrator with challenge/response Would you please give me some hints so I could try it again. All I need is to allow the freeradius server and Chillispot to hand over the authentication (for wireless client) to the Win2k3 Active Directory. To be able to achive that, I have to make sure the above two steps are working (at moment they are not working). Many thanks again in advance. Regards John -----Original Message----- From: freeradius-users-bounces+j.wan=mbs.edu(a)lists.freeradius.org [mailto:freeradius-users-bounces+j.wan=mbs.edu@lists.freeradius.org] On Behalf Of Alan DeKok Sent: Thursday, 14 December 2006 12:20 PM To: FreeRadius users mailing list Subject: Re: help John Wan wrote: > Would you please give me some hints how to start the Kerberos server > and how to solve the issue of > "ads_connect: Invalid credentials". Unfortunately, I'm not a kerberos or Samba expert. I know just enough to follow the script. If it doesn't work, I suggest asking on the Samba / kerberos lists. i.e. the people who wrote the software are the ones most likely to be able to help you. Alan DeKok. -- http://deployingradius.com - The web site of the book http://deployingradius.com/blog/ - The blog - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html -- _______________________________________________________________________________ Notice from Melbourne Business School Ltd The information contained in this e-mail is confidential, and is intended for the named person's use only. It may contain proprietary or legally privileged information. If you have received this email in error, please notify the sender and delete it immediately. You must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message if you are not the intended recipient Internet communications are not secure. You should scan this message and any attachments for viruses. Melbourne Business School does not accept any liability for loss or damage which may result from receipt of this message or any attachments. ______________________________________________________________________________

1 0

Fw: My AP does accountig but radwho doesn't work..
by adreas Polyxronopoulos 04 Jan '07

04 Jan '07

Hi list , I am still have problem with the radwho , i will show you the out put of radiusd -X and some Access-Requests and Accounting-Requests. My Ap (3Com 7250) has the option for accounting and i have enable it. However when i try to do radwho i get this: " radwho: Error reading /usr/local/var/log/radius/radutmp: No such file or directory " Is there something i have to configure in the radiusd.conf file to make radwho work ? Or just my AP (Access Point) doesn't provide to the freeradius the necessary information in the Acct-Request packets ? Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf main: prefix = "/usr/local" main: localstatedir = "/usr/local/var" main: logdir = "/usr/local/var/log/radius" main: libdir = "/usr/local/lib" main: radacctdir = "/usr/local/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/local/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid" main: bind_address = 10.0.0.15 IP address [10.0.0.15] main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded MS-CHAP mschap: use_mppe = no mschap: require_encryption = yes mschap: require_strong = yes mschap: with_ntdomain_hack = yes mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded eap eap: default_eap_type = "peap" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/usr/local/etc/raddb/certs/server_keycert.pem" tls: certificate_file = "/usr/local/etc/raddb/certs/server_keycert.pem" tls: CA_file = "/usr/local/etc/raddb/certs/demoCA/cacert.pem" tls: private_key_password = "whatever" tls: dh_file = "/usr/local/etc/raddb/certs/dh" tls: random_file = "/usr/local/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" tls: cipher_list = "(null)" tls: check_cert_issuer = "(null)" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls peap: default_eap_type = "mschapv2" peap: copy_request_to_tunnel = yes peap: use_tunneled_reply = no peap: proxy_tunneled_request_as_eap = yes rlm_eap: Loaded and initialized type peap mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" preprocess: hints = "/usr/local/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded files files: usersfile = "/usr/local/etc/raddb/users" files: acctusersfile = "/usr/local/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded detail detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/usr/local/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication 10.0.0.15:1812 Listening on accounting 10.0.0.15:1813 Ready to process requests. rad_recv: Access-Request packet from host 10.0.0.10:1408, id=198, length=138 NAS-IP-Address = 10.0.0.10 NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Framed-MTU = 1400 User-Name = "apolyxrono" Calling-Station-Id = "00166f122595" Called-Station-Id = "000d545c4190" NAS-Identifier = "3Com Access Point" EAP-Message = 0x0201000f0161706f6c7978726f6e6f Message-Authenticator = 0x47cc3024d51fb19485e90cd52962ad61 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 rlm_eap: EAP packet type response id 1 length 15 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry DEFAULT at line 155 users: Matched entry apolyxrono at line 220 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 198 to 10.0.0.10 port 1408 Reply-Message = "Welcome , %u" EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x234c381b5cc68119faa7499b3cb59fee Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.0.0.10:1409, id=199, length=253 NAS-IP-Address = 10.0.0.10 NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Framed-MTU = 1400 User-Name = "apolyxrono" Calling-Station-Id = "00166f122595" Called-Station-Id = "000d545c4190" NAS-Identifier = "3Com Access Point" State = 0x234c381b5cc68119faa7499b3cb59fee EAP-Message = 0x0202007019800000006616030100610100005d0301459c110f9b82999f23a84db7a26eb27c0b9c6711dd4390cdfbf5c2db4aa57bec2050182aa819b8b58cd0adaeb387a3a622e8709999ff8180a08b02ddb68a7f6840001600040005000a000900640062000300060013001200630100 Message-Authenticator = 0x433ccf5b0655d036f762b73192f98553 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 rlm_eap: EAP packet type response id 2 length 112 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched entry DEFAULT at line 155 users: Matched entry apolyxrono at line 220 modcall[authorize]: module "files" returns ok for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0061], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 05c7], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept:error in SSLv3 read client certificate A rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0) In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 1 modcall: leaving group authenticate (returns handled) for request 1 Sending Access-Challenge of id 199 to 10.0.0.10 port 1409 Reply-Message = "Welcome , %u" EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x47e3aa91c4a7c62d855ebefbb225c270321d32ce654de2912e25c66095225ba00c3a0bd8000307308203033082026ca003020102020100300d06092a864886f70d0101050500308188310b3009060355040613024752310f300d06035504081306416368616961310c300a060355040a130365636531123010060355040b13096563652e63736c6162311f301d0603550403131661706f6c7978726f6e6f322e64796e646e732e6f72673125302306092a864886f70d010901161661706f6c7978726f6e6f407961686f6f2e636f2e756b301e170d3036313232393134343730345a170d3039313232383134343730345a308188310b30090603550406 EAP-Message = 0x13024752310f300d0603550408130641636861696131 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xda4ab1c620d6543d234fea807c3610fd Finished request 1 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.0.0.10:1410, id=200, length=147 NAS-IP-Address = 10.0.0.10 NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Framed-MTU = 1400 User-Name = "apolyxrono" Calling-Station-Id = "00166f122595" Called-Station-Id = "000d545c4190" NAS-Identifier = "3Com Access Point" State = 0xda4ab1c620d6543d234fea807c3610fd EAP-Message = 0x020300061900 Message-Authenticator = 0xb2c20697f1b00778ece132668b102f09 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 rlm_eap: EAP packet type response id 3 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 users: Matched entry DEFAULT at line 155 users: Matched entry apolyxrono at line 220 modcall[authorize]: module "files" returns ok for request 2 modcall: leaving group authorize (returns updated) for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 2 modcall: leaving group authenticate (returns handled) for request 2 Sending Access-Challenge of id 200 to 10.0.0.10 port 1410 Reply-Message = "Welcome , %u" EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x552ebd7278944fa0618f2f18622a0961279cce8b46d7def9fe29728f1abcacb913c9d0fba7f5f416030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe5971a6cf703ba3d34e50a5601826968 Finished request 2 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.0.0.10:1411, id=201, length=333 NAS-IP-Address = 10.0.0.10 NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Framed-MTU = 1400 User-Name = "apolyxrono" Calling-Station-Id = "00166f122595" Called-Station-Id = "000d545c4190" NAS-Identifier = "3Com Access Point" State = 0xe5971a6cf703ba3d34e50a5601826968 EAP-Message = 0x020400c01980000000b61603010086100000820080940d782ad49cef7da548211b2c6775484f6be3b48f45bc5c2bde617b77263903ceec02088ff173c3f35faa83d3df22947969a7744b08374c00f453ac0d3c3e355416136ab709d25db736b0ab88d57f98ced91b799a1f86fe29c00d5efc2339946745d8ae5bcf52d46f28ac95b7085e20ffc3406d2e7cd460c727eb99806f472b1403010001011603010020aa06319174db144f78daf52ca226c3812f18c1c8e066e6880307700708bf4508 Message-Authenticator = 0x73d01bd8b079e8bc0d49909e2cb39700 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 rlm_eap: EAP packet type response id 4 length 192 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 3 users: Matched entry DEFAULT at line 155 users: Matched entry apolyxrono at line 220 modcall[authorize]: module "files" returns ok for request 3 modcall: leaving group authorize (returns updated) for request 3 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0) SSL Connection Established eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 3 modcall: leaving group authenticate (returns handled) for request 3 Sending Access-Challenge of id 201 to 10.0.0.10 port 1411 Reply-Message = "Welcome , %u" EAP-Message = 0x010500311900140301000101160301002092640e9bc3fcce865c35b8528a7f206a309454b72226f26d8d107e3a0cb7a755 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa5a5d4a87f265e058a85b60ce58a7cb6 Finished request 3 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.0.0.10:1412, id=202, length=147 NAS-IP-Address = 10.0.0.10 NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Framed-MTU = 1400 User-Name = "apolyxrono" Calling-Station-Id = "00166f122595" Called-Station-Id = "000d545c4190" NAS-Identifier = "3Com Access Point" State = 0xa5a5d4a87f265e058a85b60ce58a7cb6 EAP-Message = 0x020500061900 Message-Authenticator = 0x1e3917b24041754e476563660eb4c159 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "preprocess" returns ok for request 4 rlm_eap: EAP packet type response id 5 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 4 users: Matched entry DEFAULT at line 155 users: Matched entry apolyxrono at line 220 modcall[authorize]: module "files" returns ok for request 4 modcall: leaving group authorize (returns updated) for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake is finished eaptls_verify returned 3 eaptls_process returned 3 rlm_eap_peap: EAPTLS_SUCCESS modcall[authenticate]: module "eap" returns handled for request 4 modcall: leaving group authenticate (returns handled) for request 4 Sending Access-Challenge of id 202 to 10.0.0.10 port 1412 Reply-Message = "Welcome , %u" EAP-Message = 0x0106002019001703010015a5e4c6ef8df54c0af887510e0c454fc9c925240453 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6f3444032f54184c98c36e48843a19fb Finished request 4 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.0.0.10:1413, id=203, length=179 NAS-IP-Address = 10.0.0.10 NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Framed-MTU = 1400 User-Name = "apolyxrono" Calling-Station-Id = "00166f122595" Called-Station-Id = "000d545c4190" NAS-Identifier = "3Com Access Point" State = 0x6f3444032f54184c98c36e48843a19fb EAP-Message = 0x020600261900170301001b1ac5bbbeeaf972dfe254c4d9d8994af2df354179c44d399937a9a8 Message-Authenticator = 0xe9929230d068c0cfb686d1edc0254c24 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 rlm_eap: EAP packet type response id 6 length 38 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 users: Matched entry DEFAULT at line 155 users: Matched entry apolyxrono at line 220 modcall[authorize]: module "files" returns ok for request 5 modcall: leaving group authorize (returns updated) for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Identity - apolyxrono rlm_eap_peap: Tunneled data is valid. PEAP: Got tunneled identity of apolyxrono PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to apolyxrono Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 rlm_eap: EAP packet type response id 6 length 15 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 users: Matched entry DEFAULT at line 155 users: Matched entry apolyxrono at line 220 modcall[authorize]: module "files" returns ok for request 5 modcall: leaving group authorize (returns updated) for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: EAP Identity rlm_eap: processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 5 modcall: leaving group authenticate (returns handled) for request 5 PEAP: Got tunneled Access-Challenge modcall[authenticate]: module "eap" returns handled for request 5 modcall: leaving group authenticate (returns handled) for request 5 Sending Access-Challenge of id 203 to 10.0.0.10 port 1413 Reply-Message = "Welcome , %u" EAP-Message = 0x0107003b19001703010030bf95008eecd47ff31262d612d1974351e866dc9784d2bf0c90ee40b9878d1a2d53f184267dee7c301bcf369f5290042e Message-Authenticator = 0x00000000000000000000000000000000 State = 0x217d9fd513bdaefaf143de9dd53e661c Finished request 5 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.0.0.10:1414, id=204, length=233 NAS-IP-Address = 10.0.0.10 NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Framed-MTU = 1400 User-Name = "apolyxrono" Calling-Station-Id = "00166f122595" Called-Station-Id = "000d545c4190" NAS-Identifier = "3Com Access Point" State = 0x217d9fd513bdaefaf143de9dd53e661c EAP-Message = 0x0207005c1900170301005142250a1eb7f636498a5f6402e9d43b70c634ef5ece8bd44c67dd9b0b3b5d300d5571bb362d4629003f5eee3bb00bb17ea98d3706a7016e0956a9964f1abf1166fca19ff1bff4073b5ba57e164c054902ca Message-Authenticator = 0x3c8d531291a8cce0e8cd9cbd6483281e Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "preprocess" returns ok for request 6 rlm_eap: EAP packet type response id 7 length 92 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 users: Matched entry DEFAULT at line 155 users: Matched entry apolyxrono at line 220 modcall[authorize]: module "files" returns ok for request 6 modcall: leaving group authorize (returns updated) for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: EAP type mschapv2 rlm_eap_peap: Tunneled data is valid. PEAP: Setting User-Name to apolyxrono PEAP: Adding old state with 97 52 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "preprocess" returns ok for request 6 rlm_eap: EAP packet type response id 7 length 69 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 users: Matched entry DEFAULT at line 155 users: Matched entry apolyxrono at line 220 modcall[authorize]: module "files" returns ok for request 6 modcall: leaving group authorize (returns updated) for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 Processing the authenticate section of radiusd.conf modcall: entering group MS-CHAP for request 6 rlm_mschap: Told to do MS-CHAPv2 for apolyxrono with NT-Password modcall[authenticate]: module "mschap" returns ok for request 6 modcall: leaving group MS-CHAP (returns ok) for request 6 MSCHAP Success modcall[authenticate]: module "eap" returns handled for request 6 modcall: leaving group authenticate (returns handled) for request 6 PEAP: Got tunneled Access-Challenge modcall[authenticate]: module "eap" returns handled for request 6 modcall: leaving group authenticate (returns handled) for request 6 Sending Access-Challenge of id 204 to 10.0.0.10 port 1414 Reply-Message = "Welcome , %u" EAP-Message = 0x0108004a1900170301003f2f9e49443ff7ee46c8e5ffe8a2e92ef9306fdae10f5465276e42faa291bdc286c3b07291242c2c79dac47c1cefaf93b4e2595e87dd9604d6b97e3df8e789f9 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3199fe744bdd4d6520d40c3aa9d0b14f Finished request 6 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.0.0.10:1415, id=205, length=170 NAS-IP-Address = 10.0.0.10 NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Framed-MTU = 1400 User-Name = "apolyxrono" Calling-Station-Id = "00166f122595" Called-Station-Id = "000d545c4190" NAS-Identifier = "3Com Access Point" State = 0x3199fe744bdd4d6520d40c3aa9d0b14f EAP-Message = 0x0208001d1900170301001205ab33d832d8bc53b98060e66dc86305eb2d Message-Authenticator = 0xcbc6bab94afd70655df82f4376410ccc Processing the authorize section of radiusd.conf modcall: entering group authorize for request 7 modcall[authorize]: module "preprocess" returns ok for request 7 rlm_eap: EAP packet type response id 8 length 29 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 7 users: Matched entry DEFAULT at line 155 users: Matched entry apolyxrono at line 220 modcall[authorize]: module "files" returns ok for request 7 modcall: leaving group authorize (returns updated) for request 7 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 7 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: EAP type mschapv2 rlm_eap_peap: Tunneled data is valid. PEAP: Setting User-Name to apolyxrono PEAP: Adding old state with 91 96 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 7 modcall[authorize]: module "preprocess" returns ok for request 7 rlm_eap: EAP packet type response id 8 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 7 users: Matched entry DEFAULT at line 155 users: Matched entry apolyxrono at line 220 modcall[authorize]: module "files" returns ok for request 7 modcall: leaving group authorize (returns updated) for request 7 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 7 rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns ok for request 7 modcall: leaving group authenticate (returns ok) for request 7 radius_xlat: 'Welcome , apolyxrono' PEAP: Tunneled authentication was successful. rlm_eap_peap: SUCCESS modcall[authenticate]: module "eap" returns handled for request 7 modcall: leaving group authenticate (returns handled) for request 7 Sending Access-Challenge of id 205 to 10.0.0.10 port 1415 Reply-Message = "Welcome , %u" EAP-Message = 0x010900261900170301001bc78ceb72a50f9f225f6367014d4d16aa2decfbd89251db50f6911c Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2dbeeebf66adfa7162cb48fcca366dc8 Finished request 7 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.0.0.10:1416, id=206, length=179 NAS-IP-Address = 10.0.0.10 NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Framed-MTU = 1400 User-Name = "apolyxrono" Calling-Station-Id = "00166f122595" Called-Station-Id = "000d545c4190" NAS-Identifier = "3Com Access Point" State = 0x2dbeeebf66adfa7162cb48fcca366dc8 EAP-Message = 0x020900261900170301001bb2aa704bedf0387c6419429b7adae92b476fc1df7c8cf339d09ed1 Message-Authenticator = 0xb006210dadcffc92b4807279b50f58f1 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 8 modcall[authorize]: module "preprocess" returns ok for request 8 rlm_eap: EAP packet type response id 9 length 38 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 8 users: Matched entry DEFAULT at line 155 users: Matched entry apolyxrono at line 220 modcall[authorize]: module "files" returns ok for request 8 modcall: leaving group authorize (returns updated) for request 8 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 8 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Received EAP-TLV response. rlm_eap_peap: Tunneled data is valid. rlm_eap_peap: Success rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns ok for request 8 modcall: leaving group authenticate (returns ok) for request 8 radius_xlat: 'Welcome , apolyxrono' Sending Access-Accept of id 206 to 10.0.0.10 port 1416 Reply-Message = "Welcome , apolyxrono" MS-MPPE-Recv-Key = 0x4f07bfd7b31f4bcf95c4537ee9dd4054b6ed23c353b8dfa380a1bee24b059371 MS-MPPE-Send-Key = 0x9b6219695728c1cf01e13abd0e73b2e08b52e5ceeaec910669d8cac5a5100657 EAP-Message = 0x03090004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "apolyxrono" Finished request 8 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 198 with timestamp 459c110c Cleaning up request 1 ID 199 with timestamp 459c110c Cleaning up request 2 ID 200 with timestamp 459c110c Cleaning up request 3 ID 201 with timestamp 459c110c Cleaning up request 4 ID 202 with timestamp 459c110c Cleaning up request 5 ID 203 with timestamp 459c110c Cleaning up request 6 ID 204 with timestamp 459c110c Cleaning up request 7 ID 205 with timestamp 459c110c Cleaning up request 8 ID 206 with timestamp 459c110c Nothing to do. Sleeping until we see a request. rad_recv: Accounting-Request packet from host 10.0.0.10:1406, id=2, length=158 Acct-Status-Type = Start Acct-Session-Id = "00166f122595-000d54fdb5ea-4d5e" NAS-IP-Address = 10.0.0.10 Acct-Input-Octets = 37687 Acct-Output-Octets = 21336 Acct-Input-Packets = 124 Acct-Output-Packets = 152 User-Name = "apolyxrono" Vendor-Specific = 0x564c414e2049442069733a2030 Vendor-Specific = 0x4553534944203d206d794170 Vendor-Specific = 0x45415020547970652069733a204541502d50454150 Acct-Session-Time = 32 Processing the preacct section of radiusd.conf modcall: entering group preacct for request 9 modcall[preacct]: module "preprocess" returns noop for request 9 rlm_acct_unique: WARNING: Attribute NAS-Port was not found in request, unique ID MAY be inconsistent rlm_acct_unique: Hashing ',Client-IP-Address = 10.0.0.10,NAS-IP-Address = 10.0.0.10,Acct-Session-Id = "00166f122595-000d54fdb5ea-4d5e",User-Name = "apolyxrono"' rlm_acct_unique: Acct-Unique-Session-ID = "e27dcefb66f90e5e". modcall[preacct]: module "acct_unique" returns ok for request 9 rlm_realm: No '@' in User-Name = "apolyxrono", looking up realm NULL rlm_realm: No such realm "NULL" modcall[preacct]: module "suffix" returns noop for request 9 modcall[preacct]: module "files" returns noop for request 9 modcall: leaving group preacct (returns ok) for request 9 Processing the accounting section of radiusd.conf modcall: entering group accounting for request 9 radius_xlat: '/usr/local/var/log/radius/radacct/10.0.0.10/detail-20070103' rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/10.0.0.10/detail-20070103 modcall[accounting]: module "detail" returns ok for request 9 radius_xlat: '/usr/local/var/log/radius/radutmp' radius_xlat: 'apolyxrono' rlm_radutmp: No NAS-Port seen. Cannot do anything. rlm_radumtp: WARNING: checkrad will probably not work! modcall[accounting]: module "radutmp" returns noop for request 9 modcall: leaving group accounting (returns ok) for request 9 Sending Accounting-Response of id 2 to 10.0.0.10 port 1406 Finished request 9 Going to the next request --- Walking the entire request list --- Cleaning up request 9 ID 2 with timestamp 459c112d Nothing to do. Sleeping until we see a request. thanks Adreas Polyxronopoulos ----- Forwarded Message ---- From: adreas Polyxronopoulos <apolyxrono(a)yahoo.co.uk> To: freeradius users-list <freeradius-users(a)lists.freeradius.org> Sent: Wednesday, 3 January, 2007 3:03:23 PM Subject: My AP does accountig but radwho doesn't work.. Hi list, I am trying to work the radwho command but i get this error : radwho: Error reading /usr/local/var/log/radius/radutmp: No such file or directory My AccessPoint (3com 7250) has the accounting option i have set it enable and i have detail files in /usr/local/var/log/radius/radacct/10.0.0.10 . In my radiusd.conf : radutmp { filename = ${LOGDIR}/radutmp username = %{User-Name} case_sensitive = yes check_with_nas = yes perm = 0600 callerid = yes } accounting { detail radutmp } session { radutmp } ----- and when running radiusd -X : .............. Module: Loaded radutmp radutmp: filename = "/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes .... Module: Instantiated radutmp (radutmp) thanks Adreas Polyxronopoulos Send instant messages to your online friends http://uk.messenger.yahoo.com Send instant messages to your online friends http://uk.messenger.yahoo.com

2 1

RE: problem with NT-Password and LDAP
by Ana Gallardo Gómez 04 Jan '07

04 Jan '07

> OK, use the "perl" module to re-write the attribute. There is an > "example.pl" distributed with the server that should be a good start. > > Alan DeKok. I 'm trying to use the perl module to authenticate users removing white spaces from NT-Password. This is my remove_white_spaces.pl: use strict; use vars qw(%RAD_REQUEST %RAD_REPLY %RAD_CHECK %RAD_CONFIG %RAD_PROXY %RAD_PROXY_REPLY); use Data::Dumper; use constant RLM_MODULE_REJECT=> 0;# /* immediately reject the request */ use constant RLM_MODULE_FAIL=> 1;# /* module failed, don't reply */ use constant RLM_MODULE_OK=> 2;# /* the module is OK, continue */ use constant RLM_MODULE_HANDLED=> 3;# /* the module handled the request, so stop. */ use constant RLM_MODULE_INVALID=> 4;# /* the module considers the request invalid. */ use constant RLM_MODULE_USERLOCK=> 5;# /* reject the request (user is locked out) */ use constant RLM_MODULE_NOTFOUND=> 6;# /* user not found */ use constant RLM_MODULE_NOOP=> 7;# /* module succeeded without doing anything */ use constant RLM_MODULE_UPDATED=> 8;# /* OK (pairs modified) */ use constant RLM_MODULE_NUMCODES=> 9;# /* How many return codes there are */ sub hex_to_ascii ($) { # Convert each two-digit hex number back to an ASCII character. (my $str = shift) =~ s/([a-fA-F0-9]{2})/chr(hex $1)/eg; return $str; } sub ascii_to_hex ($) { ## Convert each ASCII character to a two-digit hex number. (my $str = shift) =~ s/(.|\n)/sprintf("%02lx", ord $1)/eg; return $str; } # Function to handle authorize sub authorize { my $h_str = $RAD_CHECK{'NT-Password'}; &radiusd::radlog(1, "NT-Password (hex) ..... $h_str"); my $a_str = hex_to_ascii $h_str; $a_str=~s/(\s)+$//; $a_str=~s/(0x)//; &radiusd::radlog(1, "NT-Password (ascii) ..... $a_str"); $h_str = ascii_to_hex $a_str; $RAD_CHECK{'NT-Password'}=$h_str; &radiusd::radlog(1, "NT-Password ..... $RAD_CHECK{'NT-Password'}"); return RLM_MODULE_OK; } In radiusd.conf... perl { module = /usr/local/radius/scripts_perl/quitar_espacios.pl max_clones = 32 start_clones = 5 min_spare_clones = 3 max_spare_clones = 3 cleanup_delay = 5 max_request_perl_clone = 0 } authorize { preprocess suffix files Autz-Type LDAP_UNEX_ES{ ldap_unex_es perl } mschap eap } The debug information is: rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap_unex_es" returns ok for request 6 perl_pool: item 0x835eb10 asigned new request. Handled so far: 3 found interpetator at address 0x835eb10 rlm_perl: NT-Password (hex) ..... 0x303642313145334439343130323145314135433531433638363846324630453620202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020 rlm_perl: NT-Password (ascii) ..... 06B11E3D941021E1A5C51C6868F2F0E6 rlm_perl: NT-Password ..... 3036423131453344393431303231453141354335314336383638463246304536 rlm_perl: Added pair NT-Password = 3036423131453344393431303231453141354335314336383638463246304536 rlm_perl: Added pair User-Password = 76027476 rlm_perl: Added pair Autz-Type = LDAP_UNEX_ES rlm_perl: Added pair Simultaneous-Use = 1 rlm_perl: Added pair Auth-Type = EAP perl_pool total/active/spare [3/0/3] Unreserve perl at address 0x835eb10 modcall[authorize]: module "perl" returns ok for request 6 modcall: leaving group LDAP_UNEX_ES (returns ok) for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 Processing the authenticate section of radiusd.conf modcall: entering group MS-CHAP for request 6 rlm_mschap: Invalid NT-Password <---- rlm_mschap: Told to do MS-CHAPv2 for 02747632 with NT-Password rlm_mschap: FAILED: No NT/LM-Password. Cannot perform authentication. rlm_mschap: FAILED: MS-CHAP2-Response is incorrect modcall[authenticate]: module "mschap" returns reject for request 6 modcall: leaving group MS-CHAP (returns reject) for request 6 rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns reject for request 6 modcall: leaving group authenticate (returns reject) for request 6 auth: Failed to validate the user. Login incorrect: [02747632/<no User-Password attribute>] (from client localhost port 0) PEAP: Tunneled authentication was rejected. rlm_eap_peap: FAILURE modcall[authenticate]: module "eap" returns handled for request 6 modcall: leaving group authenticate (returns handled) for request 6 ... I don't know what is the problem: NT-Password is hexadecimal? incorrect use of perl module?... Thank you specially to Alan _________________________________________________________________ Llama a tus amigos de PC a PC: ¡Es GRATIS! http://get.live.com/messenger/overview

2 1

interesting (somewhat old) article
by Long 04 Jan '07

04 Jan '07

I ran across this in searching for solutions to my upgrade woes; it doesn't help me much but is good reading. If it's already linked somewhere in the wiki or docs, I apologize. http://www.student.nada.kth.se/~x00_jcb/FinalReport.pdf Andrew Long Network Support Specialist EscapeWire Solutions LLC 617 Dingens Street Buffalo, NY 14206 Office (716) 893-4984 Mobile (716) 830-5169

2 1

0.9.3 > 1.1.0 sql errors
by Andrew Long 04 Jan '07

04 Jan '07

I am trying to get a second server (ver. 1.1.0) running mostly on the configs from an older (0.9.3). The sql tables are identical (except for some ip changes) and the radiusd.conf, sql.conf, etc are identical except for small details particular to system (I hope). When I point an NAS (Colubris CN3000) to the new server, it authenticates, but we get error: radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'hawth_cn3000' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' rlm_sql: Failed to create the pair: Unknown value Administrative for attribute Service-Type rlm_sql (sql): Error getting data from database And... only one A-V pair is sent along... Sending Access-Accept of id 187 to 204.95.127.xxx port 2048 Colubris-AVPair = "login-url=http://64.69.121.xxx/hotspots/hawthorn/login.html?loginurl=%l" with this in the colubris log... At least one required internal page was not retrieved - Keeping previous set of internal pages. I have run the query on the old server and the results are the identical set. When authenticating to the old server, no errors result and all A-V pairs are sent along... Any hints? Andrew -- Regards, Andrew Long Network Support Specialist EscapeWire Solutions, LLC 617 Dingens Street Buffalo, NY 14206 Office: (716) 893-4984 Mobile: (716) 830-5169 Fax: (716) 891-4288 ****** CONFIDENTIALITY NOTICE ****** NOTICE: This e-mail message and all attachments transmitted with it may contain legally privileged and confidential information intended solely for the use of the addressee. If the reader of this message is not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately and delete this message from your system. Thank you.

2 1

RE: How to restrict users /PAM to specific NAS devices??
by Ellis, Scott 1 (N-Comptel Inc.) 04 Jan '07

04 Jan '07

Thanks. Got it working. Scott -----Original Message----- From: freeradius-users-bounces+scott.1.ellis=lmco.com(a)lists.freeradius.org [mailto:freeradius-users-bounces+scott.1.ellis=lmco.com@lists.freeradius .org] On Behalf Of Alan DeKok Sent: Wednesday, January 03, 2007 9:58 AM To: FreeRadius users mailing list Subject: Re: How to restrict users /PAM to specific NAS devices?? Ellis, Scott 1 (N-Comptel Inc.) wrote: > Well here is where I am. > > I am using PAM. Yes, you've said that lots. And it has nothing to do with user names, grouping, or RADIUS client devices. It's completely irrelevant to the problem at habd. > All I need to pull all the pieces together is one simple example of > what has to be done to do the following: user1 and user2 can access > devices 10.1.1.1, 10.1.1.2, and user3 can access only 10.1.1.3. > ************* > > Here is where I am. To turn on rlm_passwd, I think, you have to goto > radiusd.conf and create a passwd entry say passwd My_group { > filename = ${raddbdir}/My.group > format "=Group-Name:*,User-Name" No, the Group and Group-Name attributes are for Unix groups. The documentation for rlm_passwd says specifically that you need to create a different attribute. > authtype = PAM (I hope I can auth via PAM since that is how my > security is tailored) You don't need that line. Delete it. > Next, you have to add it to the dictionary ... My_group? No. > Then, I was thinking I could use the huntgroups and add a entry called > admin and ops. The huntgroup would include multiple entries If you're going to use huntgroups, then you don't need to use rlm_passwd, but you do need extra entries in the "users" file... as documented in the "huntgroups" file itself. > huntgroups > > admin NAS-IP-Address = 10.1.1.1 > admin NAS-IP-Address = 10.1.1.2 > User-Name = user1, > User-Name = user2 > ops NAS-IP-Address = 10.1.1.3 > User-Name = user3 You should use the same huntgroup name for them all. > Finally, if I am at least close, I am not entirely clear how to setup > the USERS file for > user1 and user2 and user3. You don't. As per the documentation in the "huntgroups" file, you can match a huntgroup by doing: DEFAULT Huntgroup-Name == "admin" If you read the FAQ, there is an example of rejecting a user based on certain criteria. With a little bit of putting the pieces together, the following should work: DEFAULT Huntgroup-Name != "admin", Auth-Type := Reject Which will reject everyone who doesn't match the criteria in the huntgroups file. If you want something more complicated, you will need a more complicated configuration. Part of the issue is that there is no one place which will give you the exact configuration you need to solve the problem. Instead, the documentation describes how to solve problems, and it's up to you to put the pieces together. Alan DeKok. -- http://deployingradius.com - The web site of the book http://deployingradius.com/blog/ - The blog - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0