- Freeradius-Users - lists.freeradius.org

configuration problem in Freeradius.
by capricorn 20 Nov '06

20 Nov '06

hi ! i got howto of freeradius. I am configuring it on suse 10.1 n i have performed all steps but getting error. I tried alot to troubleshoot it but didnt get any success. So i am pasting me error here . Plz help me . myserver:~ # radtest johndoe hello localhost 1812 password Sending Access-Request of id 151 to 127.0.0.1 port 1812 User-Name = "johndoe" User-Password = "hello" NAS-IP-Address = 255.255.255.255 NAS-Port = 1812 rad_recv: Access-Reject packet from host 127.0.0.1:1812, id=151, length=20 myserver:~ # ------------------------------------------------------------ myserver:~ # radiusd -X Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1:1025, id=151, length=59 User-Name = "johndoe" User-Password = "hello" NAS-IP-Address = 255.255.255.255 NAS-Port = 1812 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "johndoe", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched entry DEFAULT at line 157 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns ok) for request 0 rad_check_password: Found Auth-Type System auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 modcall[authenticate]: module "unix" returns notfound for request 0 modcall: leaving group authenticate (returns notfound) for request 0 auth: Failed to validate the user. rad_lowerpair: User-Name now 'johndoe' rad_lowerpair: User-Password now 'hello' rad_rmspace_pair: User-Name now 'johndoe' rad_rmspace_pair: User-Password now 'hello' Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "johndoe", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched entry DEFAULT at line 157 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns ok) for request 0 rad_check_password: Found Auth-Type System auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 modcall[authenticate]: module "unix" returns notfound for request 0 modcall: leaving group authenticate (returns notfound) for request 0 auth: Failed to validate the user. Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 151 to 127.0.0.1 port 1025 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 151 with timestamp 455743f6 Nothing to do. Sleeping until we see a request. -- View this message in context: http://www.nabble.com/configuration-problem-in-Freeradius.-tf2627693.html#a… Sent from the FreeRadius - User mailing list archive at Nabble.com.

3 2

RE: how to allow login only from specified access point?
by Ramm-Ericson, Johannes 20 Nov '06

20 Nov '06

On Sat, 18 Nov 2006 13:54:32 +0100, Norbert Grochal wrote: > I have freeradius serwer with PEAP auth. secrets of nasnames > and user passwords are in mysql. > > Is it possible to set freeradius to send Access-Accept only > where user try to connect to specified access point? I try to > check it by sql query modified by me. > > snip.... < > > My question is as I have written: > Is it possible to set freeradius to send Access-Accept only > where user try to connect to specified access point? > And how to do it ? :-). > > Norboro One place to configure that would be in : /path/to/freeradius/etc/raddb/users. /johannes

2 1

SQLIPPOOL Documentation
by Liborio Marrone 20 Nov '06

20 Nov '06

Hi all, where can I get documentation (howto or whatever) about configuration of ip pools using (my)sql and sqlippool ? Freeradius docs about that is very poor . Thanks in advance. Boris

1 0

Re: PEAPv2 Server
by david＠mitton.com 20 Nov '06

20 Nov '06

Microsoft implements something better known as PEAP v0 see: draft-kamath-pppext-peapv0-00.txt, “Microsoft’s PEAP v0 (Implemented in Windows XP SP1) July 2002, http://www.watersprings. org/pub/id/draft-kamath-pppext-peapv0-00.txt As far as I know, no-one implements PEAP v2, and it's not clear why you would build a server for it if you don't have a client? Dave. ----Original Message---- From: aland(a)deployingradius.com Date: Nov 15, 2006 14:49 To: "FreeRadius users mailing list"<freeradius-users(a)lists.freeradius. org> Subj: Re: PEAPv2 Server "MURAT SEZGIN" <sezginmurat(a)hotmail.com> wrote: > I am trying to implement a PEAP version 2 > (draft-josefsson-pppext-eap-tls-eap-10.txt) client. I was using "Odyssey > Server Administration" server for PEAP v1 and EAP-TTLS. But the server does > not support PEAP v2. Is there any other server softwares which support PEAP > v2? Or is there any body who tried to test PEAP v2? Microsoft supports PEAPv2, I think. My suggestion is to implement PEAPv2 in a server first, and to test that implementation with the Microsoft clients. Once that works, you then have a server you can use to test your client implementation. Alan DeKok. -- http://deployingradius.com - The web site of the book http://deployingradius.com/blog/ - The blog - List info/subscribe/unsubscribe? See http://www.freeradius. org/list/users.html

6 8

acct_unique module - Dynamic Client-IP-Address causes duplicate session entries in accounting table
by Gunther 18 Nov '06

18 Nov '06

My set up: multiple servers with FreeRadius 1.1.0, MySQL 5.0.27 with Master-Master replication After some trouble with duplicate entries in the radius accounting table due to non-unique Acct-Session-Id's, I switched to using the acct_unique module. acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } This works fine as long as the Client-IP-Address remains a constant during a session. But when the connection to the ISP drops for a moment, a new Client-IP-Address will be used and the Acct-Unique-Session-Id will change in the middle of a session. This causes a new session to be inserted into the accounting table. The new session simply continues using all the values of the previous session as the NAS is not aware of the Client-IP-Address change. This will cause that the time of the first session and the second session are added, even it is the same session. This is pretty bad for prepaid tickets as their life is shortend. I like to change the acct_unique set up and exchange the Client-IP-Address with another more steady parameter like NAS-Identifier or Called-Station-Id or Calling-Station-Id or Framed-IP-Address. I am going to use the following: acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Calling-Station-Id, NAS-Port" } The Calling-Station-Id (end-user MAC address) would not change during a session and is not really user selectable. While the Called-Station-Id and NAS-Identifier could occur multiple times as this might be a configurable NAS parameter. Any recommendations on this?

2 2

how to allow login only from specified access point?
by Norbert Grochal 18 Nov '06

18 Nov '06

I have freeradius serwer with PEAP auth. secrets of nasnames and user passwords are in mysql. Is it possible to set freeradius to send Access-Accept only where user try to connect to specified access point? I try to check it by sql query modified by me. sql: authorize_check_query = "SELECT r.id, r.UserName, r.Attribute, r.Value, r.op FROM radcheck r WHERE r.Username = '%{SQL-User-Name}' and ('%{NAS-IP-Address}' = 'aaaaaaaaaa')" When sql gets the password from sql where is no desired value of NAS-IP-Address attribute, so I don't know how to check it by sql. Example, this is ONE packet of Access-Request: rad_recv: Access-Request packet from host 10.10.10.123:2048, id=247, length=261 User-Name = "Adam Nowak" NAS-IP-Address = 10.10.10.123 (...) rlm_sql (sql): sql_set_user escaped user --> 'Adam Nowak' radius_xlat: 'SELECT r.id, r.UserName, r.Attribute, r.Value, r.op FROM radcheck r WHERE r.Username = 'Adam Nowak' and ('10.10.10.123' = 'aaaaaaaaaa') // YOU CAN SEE NAS-IP-Address here, but Adam Nowak is not the eap-peap login... (...) rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Identity - wlxtbp - // THIS IS THE CORRECT LOGIN... rlm_eap_peap: Tunneled data is valid. PEAP: Got tunneled identity of wlxtbp PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to wlxtbp (...) rlm_sql (sql): sql_set_user escaped user --> 'wlxtbp' radius_xlat: 'SELECT r.id, r.UserName, r.Attribute, r.Value, r.op FROM radcheck r WHERE r.Username = 'wlxtbp' and ('127.0.0.1' = 'aaaaaaaaaa' ) // YOU SEE 127.0.0.1 instead of desired NAS-IP-Address here, so I can't check here from which access point the user try to connect This is the place, where freeradius gets password from mysql and if the password is ok we can see: rlm_eap_peap: Received EAP-TLV response. rlm_eap_peap: Tunneled data is valid. rlm_eap_peap: Success My question is as I have written: Is it possible to set freeradius to send Access-Accept only where user try to connect to specified access point? And how to do it ? :-). Norboro

1 0

FW: how to force NAS-port info in accounting-start, for radutmp to work ok
by Radu IONESCU 18 Nov '06

18 Nov '06

as I had no answers on this thread, I'm just updating it: with an arbitrary NAS-port attribute entry in hints, radutmp is ok, radwho is working and Simultaneous-Use attribute has an effect; however the setup should be refined by implying checkrad, which does not work for NAS type 'other'; ri -----Original Message----- Sent: 15 noiembrie 2006 16:15 To: 'freeradius-users(a)lists.freeradius.org' Subject: how to force NAS-port info in accounting-start, for radutmp to work ok I have installed freeradius-1.0.5-1.2 on FC-5, and I intend to use Freeradius with only one NAS - ZyXEL VSG-1200 - a subscriber gateway for wire/wireless campus access zone. The NAS is defined in clients.conf file as "nastype = other". The VSAs are working ok. It seems that the NAS, doesn't include the NAS-Port attribute (Integer) in the accounting packets, so RADIUS accounting process doesn't write into radwtm/radutmp files (radwho outputs no data), and Simultaneous-Use check is not effective: rlm_radutmp: No NAS-Port seen. Cannot do anything. rlm_radumtp: WARNING: checkrad will probably not work! Is there a workaround for this, I mean on the RADIUS host? Thank you for any help! ri Following is a radiusd -X output for a current accounting request: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ rad_recv: Accounting-Request packet from host 192.168.19.226:10661, id=7, length=136 User-Name = "pcrist" Acct-Status-Type = Alive Acct-Delay-Time = 0 Acct-Session-Id = "0050fce8552031000000" NAS-IP-Address = 192.168.19.226 NAS-Identifier = "vsg" Framed-IP-Address = 10.59.1.2 Calling-Station-Id = "00-50-FC-E8-55-20" Called-Station-Id = "00-13-49-6F-EE-C4" Processing the preacct section of radiusd.conf modcall: entering group preacct for request 21 modcall[preacct]: module "preprocess" returns noop for request 21 rlm_acct_unique: Hashing 'Client-IP-Address = 192.168.19.226,NAS-IP-Address = 192.168.19.226,Acct-Session-Id = "0050fce8552031000000",User-Name = "pcrist"' rlm_acct_unique: Acct-Unique-Session-ID = "c425325ee3d8e6fc". modcall[preacct]: module "acct_unique" returns ok for request 21 modcall[preacct]: module "files" returns noop for request 21 modcall: group preacct returns ok for request 21 Processing the accounting section of radiusd.conf modcall: entering group accounting for request 21 radius_xlat: '/var/log/radius/radacct/192.168.19.226/detail-20061115' rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radius/radacct/192.168.19.226/detail-20061115 modcall[accounting]: module "detail" returns ok for request 21 modcall[accounting]: module "unix" returns noop for request 21 radius_xlat: '/var/log/radius/radutmp' radius_xlat: 'pcrist' rlm_radutmp: No NAS-Port seen. Cannot do anything. rlm_radumtp: WARNING: checkrad will probably not work! modcall[accounting]: module "radutmp" returns noop for request 21 modcall: group accounting returns ok for request 21 Sending Accounting-Response of id 7 to 192.168.19.226:10661 Finished request 21 Going to the next request ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ and this is a radiusd -X output when I simulate an accounting packet with NTRadPing, forcing an attribute of NAS-port=1: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ rad_recv: Accounting-Request packet from host 192.168.19.11:3828, id=4, length=43 User-Name = "dani" Acct-Status-Type = Start Acct-Session-Id = "460" NAS-Port = 1 Processing the preacct section of radiusd.conf modcall: entering group preacct for request 22 modcall[preacct]: module "preprocess" returns noop for request 22 rlm_acct_unique: Hashing 'Client-IP-Address = 192.168.19.11,NAS-IP-Address = 192.168.19.11,Acct-Session-Id = "460",User-Name = "dani"' rlm_acct_unique: Acct-Unique-Session-ID = "45e816fe4586d71f". modcall[preacct]: module "acct_unique" returns ok for request 22 modcall[preacct]: module "files" returns noop for request 22 modcall: group preacct returns ok for request 22 Processing the accounting section of radiusd.conf modcall: entering group accounting for request 22 radius_xlat: '/var/log/radius/radacct/192.168.19.11/detail-20061115' rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radius/radacct/192.168.19.11/detail-20061115 modcall[accounting]: module "detail" returns ok for request 22 modcall[accounting]: module "unix" returns ok for request 22 radius_xlat: '/var/log/radius/radutmp' radius_xlat: 'dani' modcall[accounting]: module "radutmp" returns ok for request 22 modcall: group accounting returns ok for request 22 Sending Accounting-Response of id 4 to 192.168.19.11:3828 Finished request 22 Going to the next request --- Walking the entire request list --- Cleaning up request 22 ID 4 with timestamp 455b108c Nothing to do. Sleeping until we see a request. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ the above seems ok, as I have now an entry in radutmp: # radwho Login Name What TTY When From Location dani dani shell S1 Wed 15:05 193.254.2 and an authentication packet sent with NTRadPing with the same user-name 'dani' gets an 'Access-Reject' response: 'You are already logged in - access denied' So, Simultaneous-Use works ok for me if NAS includes NAS-port attribute in accounting start packet. I wrote to ZyXEL with no much hope for an answer, so I am looking for a FreeRADIUS workaround on the host installation. --- / Universitatea TRANSILVANIA Brasov / -- virus checked - cciu unitbv

1 0

problems with ldap
by Marilene Lima 18 Nov '06

18 Nov '06

Hi, I am again. It's work with my mysql users. But, I have two databases and I will have more. The first, mysql it's ok. But, after I installed every softwares again, I can't authenticate now with my ldap users. It is the error: rlm_unix: [ldapuser]: invalid shell []... I don't know where I configure this. It is the radiusd.conf? freeradius -x Starting - reading configuration files ... Using deprecated naslist file. Support for this will go away soon. Module: Loaded exec rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP Module: Instantiated mschap (mschap) Module: Loaded System Module: Instantiated unix (unix) Module: Loaded LDAP rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/freeradius/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port conns: 0x8116868 Module: Instantiated ldap (ldap) Module: Loaded eap rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap rlm_eap: Loaded and initialized type gtc rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess Module: Instantiated preprocess (preprocess) Module: Loaded realm Module: Instantiated realm (suffix) Module: Loaded files Module: Instantiated files (files) Module: Loaded SQL rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to root@localhost:/radius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 Module: Instantiated sql (sql) Module: Loaded Acct-Unique-Session-Id Module: Instantiated acct_unique (acct_unique) Module: Loaded detail Module: Instantiated detail (detail) Module: Loaded radutmp Module: Instantiated radutmp (radutmp) Initializing the thread pool... Listening on authentication *:1812 Listening on accounting *:1813 Listening on proxy *:1814 Ready to process requests. rad_recv: Access-Request packet from host 10.0.164.67:32782, id=149, length=60 User-Name = "ldapuser" User-Password = "789" NAS-IP-Address = 255.255.255.255 NAS-Port = 10 rlm_sql (sql): Reserving sql socket id: 4 rlm_sql (sql): User ldapuser not found in radcheck rlm_sql (sql): User ldapuser not found in radgroupcheck rlm_sql (sql): User not found rlm_sql (sql): Released sql socket id: 4 rlm_ldap: - authorize rlm_ldap: performing user authorization for ldapuser rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: (re)connect to localhost:389, authentication 0 rlm_ldap: bind as / to localhost:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user ldapuser authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 rlm_unix: [ldapuser]: invalid shell [] rad_recv: Access-Request packet from host 10.0.164.67:32782, id=149, length=60 Sending Access-Reject of id 149 to 10.0.164.67:32782 wireless6e:~#

2 1

EAP anonymous and inner User-name
by Florian Prester 17 Nov '06

17 Nov '06

Hi, I want to provide the possibility of anonymouse EAP, with inner User-name and password. So I think I have to add the user "annonymous" to the users-file with Auth-type = EAP, but how do I access the inner User-name, which I need for authentication/authorization? Thanks Florian -- Dipl. Inf. Florian Prester Network Administration Regionales RechenZentrum Erlangen Universitaet Erlangen-Nuernberg Martensstr. 1 91052 Erlangen Germany Tel.: +499131 8527813

4 12

Its work!!!!
by Marilene Lima 17 Nov '06

17 Nov '06

Hi! I need to be thankful all that had helped me. My problem was decided when I reinstalled all the packages. Probably I was with some problem in my installations because I did not obtain to get no reply when I had started freeradius - x or radiusd - x. Now it's work. Thanks a lot, Marilene

1 0