- Freeradius-Users - lists.freeradius.org

Unable to complete TLS handshake with iwd client
by Pat Pat 23 Mar '25

23 Mar '25

I am trying to use freeradius with WPA2-EAP. I have android clients working but using IWD it seems to fail with a TLS handshake error. Ready to process requests Threads: total/active/spare threads = 2/0/2 Waking up in 0.3 seconds. Thread 1 got semaphore Thread 1 handling request 0, (1 handled so far) (0) Received Access-Request Id 0 from 192.168.2.2:44444 to 192.168.2.1:1812 length 117 (0) User-Name = "as" (0) NAS-IP-Address = 192.168.2.2 (0) Called-Station-Id = "b4378330fc3b" (0) Calling-Station-Id = "5a5b3135062e" (0) NAS-Identifier = "b4378330fc3b" (0) NAS-Port = 29 (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) EAP-Message = 0x02000007016173 (0) Message-Authenticator = 0x03105277799198b5f2c8e05d953827e8 (0) session-state: No State attribute (0) # Executing section authorize from file /etc/raddb/radiusd.conf (0) authorize { (0) modsingle[authorize]: calling eap (rlm_eap) (0) eap: Peer sent EAP Response (code 2) ID 0 length 7 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) modsingle[authorize]: returned from eap (rlm_eap) (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/raddb/radiusd.conf (0) authenticate { (0) modsingle[authenticate]: calling eap (rlm_eap) (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_tls to process data (0) eap_tls: (TLS) TLS -Initiating new session (0) eap_tls: (TLS) TLS - Setting verify mode to require certificate from client (0) eap_tls: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 1 length 10 (0) eap: EAP session adding &reply:State = 0xdfcd0373dfcc0e53 (0) modsingle[authenticate]: returned from eap (rlm_eap) (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) session-state: Saving cached attributes (0) Framed-MTU = 1014 (0) Sent Access-Challenge Id 0 from 192.168.2.1:1812 to 192.168.2.2:44444 length 68 (0) EAP-Message = 0x0101000a0da000000000 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xdfcd0373dfcc0e53057e01be00df4fb0 (0) Finished request Thread 1 waiting to be assigned a request (0) Cleaning up request packet ID 0 with timestamp +16 due to conflicting packet was received Waking up in 0.3 seconds. Thread 2 got semaphore Thread 2 handling request 1, (1 handled so far) (1) Received Access-Request Id 0 from 192.168.2.2:44444 to 192.168.2.1:1812 length 265 (1) User-Name = "as" (1) NAS-IP-Address = 192.168.2.2 (1) Called-Station-Id = "b4378330fc3b" (1) Calling-Station-Id = "5a5b3135062e" (1) NAS-Identifier = "b4378330fc3b" (1) NAS-Port = 29 (1) Framed-MTU = 1400 (1) State = 0xdfcd0373dfcc0e53057e01be00df4fb0 (1) NAS-Port-Type = Wireless-802.11 (1) EAP-Message = 0x020100890d00160301007e0100007a030367df7cae99f0e7e4fba4bb3181d9255fb4e4053b47f21d704f41904b9a089dc400002ac014c013003900330035002fc028c027006b0067003d003cc030c02f009f009e009d009cc0120016000a0100002700 (1) Message-Authenticator = 0x15eed9703faadf1d00a6dfe52a3e6807 (1) Restoring &session-state (1) &session-state:Framed-MTU = 1014 (1) # Executing section authorize from file /etc/raddb/radiusd.conf (1) authorize { (1) modsingle[authorize]: calling eap (rlm_eap) (1) eap: Peer sent EAP Response (code 2) ID 1 length 137 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) modsingle[authorize]: returned from eap (rlm_eap) (1) [eap] = updated (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/raddb/radiusd.conf (1) authenticate { (1) modsingle[authenticate]: calling eap (rlm_eap) (1) eap: Removing EAP session with state 0xdfcd0373dfcc0e53 (1) eap: Previous EAP request found for state 0xdfcd0373dfcc0e53, released from the list (1) eap: Peer sent packet with method EAP TLS (13) (1) eap: Calling submodule eap_tls to process data (1) eap_tls: (TLS) EAP Continuing ... (1) eap_tls: (TLS) EAP Peer sent flags --- (1) eap_tls: (TLS) EAP Got final fragment (131 bytes) WARNING: (1) eap_tls: (TLS) EAP Total received record fragments (131 bytes), does not equal expected expected data length (0 bytes) (1) eap_tls: (TLS) EAP Verification says ok (1) eap_tls: (TLS) EAP Done initial handshake (1) eap_tls: (TLS) TLS - Handshake state [PINIT] - before SSL initialization (0) (1) eap_tls: (TLS) TLS - Handshake state [PINIT] - Server before SSL initialization (0) (TLS) Ignoring cbtls_msg call with pseudo content type 256, version 00000301 (1) eap_tls: (TLS) TLS - Handshake state [PINIT] - Server before SSL initialization (0) (TLS) Received 126 bytes of TLS data (TLS) 01 00 00 7a 03 03 67 df 7c ae 99 f0 e7 e4 fb a4 (TLS) bb 31 81 d9 25 5f b4 e4 05 3b 47 f2 1d 70 4f 41 (TLS) 90 4b 9a 08 9d c4 00 00 2a c0 14 c0 13 00 39 00 (TLS) 33 00 35 00 2f c0 28 c0 27 00 6b 00 67 00 3d 00 (TLS) 3c c0 30 c0 2f 00 9f 00 9e 00 9d 00 9c c0 12 00 (TLS) 16 00 0a 01 00 00 27 00 0a 00 10 00 0e 00 17 00 (TLS) 18 01 00 01 01 01 02 01 03 01 04 00 0d 00 0a 00 (TLS) 08 05 01 04 01 01 01 02 01 ff 01 00 01 00 (1) eap_tls: (TLS) TLS - recv TLS 1.3 Handshake, ClientHello (TLS) Ignoring cbtls_msg call with pseudo content type 256, version 00000303 (TLS) Received 2 bytes of TLS data (TLS) 02 28 (1) eap_tls: (TLS) TLS - send TLS 1.2 Alert, fatal handshake_failure ERROR: (1) eap_tls: (TLS) TLS - Alert write:fatal:handshake failure ERROR: (1) eap_tls: (TLS) TLS - Server : Error in error (1) eap_tls: Server preferred ciphers (by priority) (1) eap_tls: (TLS) [0] TLS_AES_256_GCM_SHA384 (1) eap_tls: (TLS) [1] TLS_AES_128_GCM_SHA256 (1) eap_tls: (TLS) [2] ECDHE-ECDSA-AES256-GCM-SHA384 (1) eap_tls: (TLS) [3] ECDHE-RSA-AES256-GCM-SHA384 (1) eap_tls: (TLS) [4] DHE-DSS-AES256-GCM-SHA384 (1) eap_tls: (TLS) [5] DHE-RSA-AES256-GCM-SHA384 (1) eap_tls: (TLS) [6] ECDHE-ECDSA-AES256-CCM (1) eap_tls: (TLS) [7] DHE-RSA-AES256-CCM (1) eap_tls: (TLS) [8] ECDHE-ECDSA-ARIA256-GCM-SHA384 (1) eap_tls: (TLS) [9] ECDHE-ARIA256-GCM-SHA384 (1) eap_tls: (TLS) [10] DHE-DSS-ARIA256-GCM-SHA384 (1) eap_tls: (TLS) [11] DHE-RSA-ARIA256-GCM-SHA384 (1) eap_tls: (TLS) [12] ADH-AES256-GCM-SHA384 (1) eap_tls: (TLS) [13] ECDHE-ECDSA-AES128-GCM-SHA256 (1) eap_tls: (TLS) [14] ECDHE-RSA-AES128-GCM-SHA256 (1) eap_tls: (TLS) [15] DHE-DSS-AES128-GCM-SHA256 (1) eap_tls: (TLS) [16] DHE-RSA-AES128-GCM-SHA256 (1) eap_tls: (TLS) [17] ECDHE-ECDSA-AES128-CCM (1) eap_tls: (TLS) [18] DHE-RSA-AES128-CCM (1) eap_tls: (TLS) [19] ECDHE-ECDSA-ARIA128-GCM-SHA256 (1) eap_tls: (TLS) [20] ECDHE-ARIA128-GCM-SHA256 (1) eap_tls: (TLS) [21] DHE-DSS-ARIA128-GCM-SHA256 (1) eap_tls: (TLS) [22] DHE-RSA-ARIA128-GCM-SHA256 (1) eap_tls: (TLS) [23] ADH-AES128-GCM-SHA256 (1) eap_tls: (TLS) [24] ECDHE-ECDSA-AES256-SHA384 (1) eap_tls: (TLS) [25] ECDHE-RSA-AES256-SHA384 (1) eap_tls: (TLS) [26] DHE-RSA-AES256-SHA256 (1) eap_tls: (TLS) [27] DHE-DSS-AES256-SHA256 (1) eap_tls: (TLS) [28] ECDHE-ECDSA-CAMELLIA256-SHA384 (1) eap_tls: (TLS) [29] ECDHE-RSA-CAMELLIA256-SHA384 (1) eap_tls: (TLS) [30] DHE-RSA-CAMELLIA256-SHA256 (1) eap_tls: (TLS) [31] DHE-DSS-CAMELLIA256-SHA256 (1) eap_tls: (TLS) [32] ADH-AES256-SHA256 (1) eap_tls: (TLS) [33] ADH-CAMELLIA256-SHA256 (1) eap_tls: (TLS) [34] ECDHE-ECDSA-AES128-SHA256 (1) eap_tls: (TLS) [35] ECDHE-RSA-AES128-SHA256 (1) eap_tls: (TLS) [36] DHE-RSA-AES128-SHA256 (1) eap_tls: (TLS) [37] DHE-DSS-AES128-SHA256 (1) eap_tls: (TLS) [38] ECDHE-ECDSA-CAMELLIA128-SHA256 (1) eap_tls: (TLS) [39] ECDHE-RSA-CAMELLIA128-SHA256 (1) eap_tls: (TLS) [40] DHE-RSA-CAMELLIA128-SHA256 (1) eap_tls: (TLS) [41] DHE-DSS-CAMELLIA128-SHA256 (1) eap_tls: (TLS) [42] ADH-AES128-SHA256 (1) eap_tls: (TLS) [43] ADH-CAMELLIA128-SHA256 (1) eap_tls: (TLS) [44] ECDHE-ECDSA-AES256-SHA (1) eap_tls: (TLS) [45] ECDHE-RSA-AES256-SHA (1) eap_tls: (TLS) [46] DHE-RSA-AES256-SHA (1) eap_tls: (TLS) [47] DHE-DSS-AES256-SHA (1) eap_tls: (TLS) [48] DHE-RSA-CAMELLIA256-SHA (1) eap_tls: (TLS) [49] DHE-DSS-CAMELLIA256-SHA (1) eap_tls: (TLS) [50] AECDH-AES256-SHA (1) eap_tls: (TLS) [51] ADH-AES256-SHA (1) eap_tls: (TLS) [52] ADH-CAMELLIA256-SHA (1) eap_tls: (TLS) [53] ECDHE-ECDSA-AES128-SHA (1) eap_tls: (TLS) [54] ECDHE-RSA-AES128-SHA (1) eap_tls: (TLS) [55] DHE-RSA-AES128-SHA (1) eap_tls: (TLS) [56] DHE-DSS-AES128-SHA (1) eap_tls: (TLS) [57] DHE-RSA-CAMELLIA128-SHA (1) eap_tls: (TLS) [58] DHE-DSS-CAMELLIA128-SHA (1) eap_tls: (TLS) [59] AECDH-AES128-SHA (1) eap_tls: (TLS) [60] ADH-AES128-SHA (1) eap_tls: (TLS) [61] ADH-CAMELLIA128-SHA (1) eap_tls: (TLS) [62] AES256-GCM-SHA384 (1) eap_tls: (TLS) [63] AES256-CCM (1) eap_tls: (TLS) [64] ARIA256-GCM-SHA384 (1) eap_tls: (TLS) [65] AES128-GCM-SHA256 (1) eap_tls: (TLS) [66] AES128-CCM (1) eap_tls: (TLS) [67] ARIA128-GCM-SHA256 (1) eap_tls: (TLS) [68] AES256-SHA256 (1) eap_tls: (TLS) [69] CAMELLIA256-SHA256 (1) eap_tls: (TLS) [70] AES128-SHA256 (1) eap_tls: (TLS) [71] CAMELLIA128-SHA256 (1) eap_tls: (TLS) [72] SRP-DSS-AES-256-CBC-SHA (1) eap_tls: (TLS) [73] SRP-RSA-AES-256-CBC-SHA (1) eap_tls: (TLS) [74] SRP-AES-256-CBC-SHA (1) eap_tls: (TLS) [75] AES256-SHA (1) eap_tls: (TLS) [76] CAMELLIA256-SHA (1) eap_tls: (TLS) [77] SRP-DSS-AES-128-CBC-SHA (1) eap_tls: (TLS) [78] SRP-RSA-AES-128-CBC-SHA (1) eap_tls: (TLS) [79] SRP-AES-128-CBC-SHA (1) eap_tls: (TLS) [80] AES128-SHA (1) eap_tls: (TLS) [81] CAMELLIA128-SHA (1) eap_tls: (TLS) TLS - Client preferred ciphers (by priority) (1) eap_tls: (TLS) [0] ECDHE-RSA-AES256-SHA (1) eap_tls: (TLS) [1] ECDHE-RSA-AES128-SHA (1) eap_tls: (TLS) [2] DHE-RSA-AES256-SHA (1) eap_tls: (TLS) [3] DHE-RSA-AES128-SHA (1) eap_tls: (TLS) [4] AES256-SHA (1) eap_tls: (TLS) [5] AES128-SHA (1) eap_tls: (TLS) [6] ECDHE-RSA-AES256-SHA384 (1) eap_tls: (TLS) [7] ECDHE-RSA-AES128-SHA256 (1) eap_tls: (TLS) [8] DHE-RSA-AES256-SHA256 (1) eap_tls: (TLS) [9] DHE-RSA-AES128-SHA256 (1) eap_tls: (TLS) [10] AES256-SHA256 (1) eap_tls: (TLS) [11] AES128-SHA256 (1) eap_tls: (TLS) [12] ECDHE-RSA-AES256-GCM-SHA384 (1) eap_tls: (TLS) [13] ECDHE-RSA-AES128-GCM-SHA256 (1) eap_tls: (TLS) [14] DHE-RSA-AES256-GCM-SHA384 (1) eap_tls: (TLS) [15] DHE-RSA-AES128-GCM-SHA256 (1) eap_tls: (TLS) [16] AES256-GCM-SHA384 (1) eap_tls: (TLS) [17] AES128-GCM-SHA256 ERROR: (1) eap_tls: (TLS) Failed reading from OpenSSL: ssl/statem/statem_srvr.c[2312]:error:0A0000C1:lib(20)::reason(193) ERROR: (1) eap_tls: (TLS) System call (I/O) error (-1) ERROR: (1) eap_tls: (TLS) EAP Receive handshake failed during operation ERROR: (1) eap_tls: [eaptls process] = fail ERROR: (1) eap: Failed continuing EAP TLS (13) session. EAP sub-module failed (1) eap: Sending EAP Failure (code 4) ID 1 length 4 (1) eap: Failed in EAP select (1) modsingle[authenticate]: returned from eap (rlm_eap) (1) [eap] = invalid (1) } # authenticate = invalid (1) Failed to authenticate the user (1) Using Post-Auth-Type Reject (1) Post-Auth-Type sub-section not found. Ignoring. (1) Login incorrect (eap_tls: (TLS) TLS - Alert write:fatal:handshake failure): [as] (from client ac port 29 cli 5a5b3135062e) (1) Delaying response for 5.000000 seconds Thread 2 waiting to be assigned a request Waking up in 4.6 seconds. (1) Sending delayed response (1) Sent Access-Reject Id 0 from 192.168.2.1:1812 to 192.168.2.2:44444 length 44 (1) EAP-Message = 0x04010004 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) Cleaning up request packet ID 0 with timestamp +16 due to done eady to process requests Waking up in 0.3 seconds. Thread 1 got semaphore Thread 1 handling request 2, (2 handled so far) (2) Received Access-Request Id 0 from 192.168.2.2:44444 to 192.168.2.1:1812 length 117 (2) User-Name = "as" (2) NAS-IP-Address = 192.168.2.2 (2) Called-Station-Id = "b4378330fc3b" (2) Calling-Station-Id = "5a5b3135062e" (2) NAS-Identifier = "b4378330fc3b" (2) NAS-Port = 29 (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) EAP-Message = 0x02000007016173 (2) Message-Authenticator = 0x65ea19588c27954be750b34f05da01b7 (2) session-state: No State attribute (2) # Executing section authorize from file /etc/raddb/radiusd.conf (2) authorize { (2) modsingle[authorize]: calling eap (rlm_eap) (2) eap: Peer sent EAP Response (code 2) ID 0 length 7 (2) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (2) modsingle[authorize]: returned from eap (rlm_eap) (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/raddb/radiusd.conf (2) authenticate { (2) modsingle[authenticate]: calling eap (rlm_eap) (2) eap: Peer sent packet with method EAP Identity (1) (2) eap: Calling submodule eap_tls to process data (2) eap_tls: (TLS) TLS -Initiating new session (2) eap_tls: (TLS) TLS - Setting verify mode to require certificate from client (2) eap_tls: [eaptls start] = request (2) eap: Sending EAP Request (code 1) ID 1 length 10 (2) eap: EAP session adding &reply:State = 0x73da5fd773db5206 (2) modsingle[authenticate]: returned from eap (rlm_eap) (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) session-state: Saving cached attributes (2) Framed-MTU = 1014 (2) Sent Access-Challenge Id 0 from 192.168.2.1:1812 to 192.168.2.2:44444 length 68 (2) EAP-Message = 0x0101000a0da000000000 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x73da5fd773db520659675dbb5c31485d (2) Finished request Thread 1 waiting to be assigned a request (2) Cleaning up request packet ID 0 with timestamp +131 due to conflicting packet was received Waking up in 0.3 seconds. Thread 2 got semaphore Thread 2 handling request 3, (2 handled so far) (3) Received Access-Request Id 0 from 192.168.2.2:44444 to 192.168.2.1:1812 length 265 (3) User-Name = "as" (3) NAS-IP-Address = 192.168.2.2 (3) Called-Station-Id = "b4378330fc3b" (3) Calling-Station-Id = "5a5b3135062e" (3) NAS-Identifier = "b4378330fc3b" (3) NAS-Port = 29 (3) Framed-MTU = 1400 (3) State = 0x73da5fd773db520659675dbb5c31485d (3) NAS-Port-Type = Wireless-802.11 (3) EAP-Message = 0x020100890d00160301007e0100007a030367df7d21f4b742d6792d0128f9d335437102d658ee7fe1dc1c334257dacf927600002ac014c013003900330035002fc028c027006b0067003d003cc030c02f009f009e009d009cc0120016000a0100002700 (3) Message-Authenticator = 0x68e323e0b85f9b9e6c84bec8bc5bb779 (3) Restoring &session-state (3) &session-state:Framed-MTU = 1014 (3) # Executing section authorize from file /etc/raddb/radiusd.conf (3) authorize { (3) modsingle[authorize]: calling eap (rlm_eap) (3) eap: Peer sent EAP Response (code 2) ID 1 length 137 (3) eap: No EAP Start, assuming it's an on-going EAP conversation (3) modsingle[authorize]: returned from eap (rlm_eap) (3) [eap] = updated (3) } # authorize = updated (3) Found Auth-Type = eap (3) # Executing group from file /etc/raddb/radiusd.conf (3) authenticate { (3) modsingle[authenticate]: calling eap (rlm_eap) (3) eap: Removing EAP session with state 0x73da5fd773db5206 (3) eap: Previous EAP request found for state 0x73da5fd773db5206, released from the list (3) eap: Peer sent packet with method EAP TLS (13) (3) eap: Calling submodule eap_tls to process data (3) eap_tls: (TLS) EAP Continuing ... (3) eap_tls: (TLS) EAP Peer sent flags --- (3) eap_tls: (TLS) EAP Got final fragment (131 bytes) WARNING: (3) eap_tls: (TLS) EAP Total received record fragments (131 bytes), does not equal expected expected data length (0 bytes) (3) eap_tls: (TLS) EAP Verification says ok (3) eap_tls: (TLS) EAP Done initial handshake (3) eap_tls: (TLS) TLS - Handshake state [PINIT] - before SSL initialization (0) (3) eap_tls: (TLS) TLS - Handshake state [PINIT] - Server before SSL initialization (0) (TLS) Ignoring cbtls_msg call with pseudo content type 256, version 00000301 (3) eap_tls: (TLS) TLS - Handshake state [PINIT] - Server before SSL initialization (0) (TLS) Received 126 bytes of TLS data (TLS) 01 00 00 7a 03 03 67 df 7d 21 f4 b7 42 d6 79 2d (TLS) 01 28 f9 d3 35 43 71 02 d6 58 ee 7f e1 dc 1c 33 (TLS) 42 57 da cf 92 76 00 00 2a c0 14 c0 13 00 39 00 (TLS) 33 00 35 00 2f c0 28 c0 27 00 6b 00 67 00 3d 00 (TLS) 3c c0 30 c0 2f 00 9f 00 9e 00 9d 00 9c c0 12 00 (TLS) 16 00 0a 01 00 00 27 00 0a 00 10 00 0e 00 17 00 (TLS) 18 01 00 01 01 01 02 01 03 01 04 00 0d 00 0a 00 (TLS) 08 05 01 04 01 01 01 02 01 ff 01 00 01 00 (3) eap_tls: (TLS) TLS - recv TLS 1.3 Handshake, ClientHello (TLS) Ignoring cbtls_msg call with pseudo content type 256, version 00000303 (TLS) Received 2 bytes of TLS data (TLS) 02 28 (3) eap_tls: (TLS) TLS - send TLS 1.2 Alert, fatal handshake_failure ERROR: (3) eap_tls: (TLS) TLS - Alert write:fatal:handshake failure ERROR: (3) eap_tls: (TLS) TLS - Server : Error in error (3) eap_tls: Server preferred ciphers (by priority) (3) eap_tls: (TLS) [0] TLS_AES_256_GCM_SHA384 (3) eap_tls: (TLS) [1] TLS_AES_128_GCM_SHA256 (3) eap_tls: (TLS) [2] ECDHE-ECDSA-AES256-GCM-SHA384 (3) eap_tls: (TLS) [3] ECDHE-RSA-AES256-GCM-SHA384 (3) eap_tls: (TLS) [4] DHE-DSS-AES256-GCM-SHA384 (3) eap_tls: (TLS) [5] DHE-RSA-AES256-GCM-SHA384 (3) eap_tls: (TLS) [6] ECDHE-ECDSA-AES256-CCM (3) eap_tls: (TLS) [7] DHE-RSA-AES256-CCM (3) eap_tls: (TLS) [8] ECDHE-ECDSA-ARIA256-GCM-SHA384 (3) eap_tls: (TLS) [9] ECDHE-ARIA256-GCM-SHA384 (3) eap_tls: (TLS) [10] DHE-DSS-ARIA256-GCM-SHA384 (3) eap_tls: (TLS) [11] DHE-RSA-ARIA256-GCM-SHA384 (3) eap_tls: (TLS) [12] ADH-AES256-GCM-SHA384 (3) eap_tls: (TLS) [13] ECDHE-ECDSA-AES128-GCM-SHA256 (3) eap_tls: (TLS) [14] ECDHE-RSA-AES128-GCM-SHA256 (3) eap_tls: (TLS) [15] DHE-DSS-AES128-GCM-SHA256 (3) eap_tls: (TLS) [16] DHE-RSA-AES128-GCM-SHA256 (3) eap_tls: (TLS) [17] ECDHE-ECDSA-AES128-CCM (3) eap_tls: (TLS) [18] DHE-RSA-AES128-CCM (3) eap_tls: (TLS) [19] ECDHE-ECDSA-ARIA128-GCM-SHA256 (3) eap_tls: (TLS) [20] ECDHE-ARIA128-GCM-SHA256 (3) eap_tls: (TLS) [21] DHE-DSS-ARIA128-GCM-SHA256 (3) eap_tls: (TLS) [22] DHE-RSA-ARIA128-GCM-SHA256 (3) eap_tls: (TLS) [23] ADH-AES128-GCM-SHA256 (3) eap_tls: (TLS) [24] ECDHE-ECDSA-AES256-SHA384 (3) eap_tls: (TLS) [25] ECDHE-RSA-AES256-SHA384 (3) eap_tls: (TLS) [26] DHE-RSA-AES256-SHA256 (3) eap_tls: (TLS) [27] DHE-DSS-AES256-SHA256 (3) eap_tls: (TLS) [28] ECDHE-ECDSA-CAMELLIA256-SHA384 (3) eap_tls: (TLS) [29] ECDHE-RSA-CAMELLIA256-SHA384 (3) eap_tls: (TLS) [30] DHE-RSA-CAMELLIA256-SHA256 (3) eap_tls: (TLS) [31] DHE-DSS-CAMELLIA256-SHA256 (3) eap_tls: (TLS) [32] ADH-AES256-SHA256 (3) eap_tls: (TLS) [33] ADH-CAMELLIA256-SHA256 (3) eap_tls: (TLS) [34] ECDHE-ECDSA-AES128-SHA256 (3) eap_tls: (TLS) [35] ECDHE-RSA-AES128-SHA256 (3) eap_tls: (TLS) [36] DHE-RSA-AES128-SHA256 (3) eap_tls: (TLS) [37] DHE-DSS-AES128-SHA256 (3) eap_tls: (TLS) [38] ECDHE-ECDSA-CAMELLIA128-SHA256 (3) eap_tls: (TLS) [39] ECDHE-RSA-CAMELLIA128-SHA256 (3) eap_tls: (TLS) [40] DHE-RSA-CAMELLIA128-SHA256 (3) eap_tls: (TLS) [41] DHE-DSS-CAMELLIA128-SHA256 (3) eap_tls: (TLS) [42] ADH-AES128-SHA256 (3) eap_tls: (TLS) [43] ADH-CAMELLIA128-SHA256 (3) eap_tls: (TLS) [44] ECDHE-ECDSA-AES256-SHA (3) eap_tls: (TLS) [45] ECDHE-RSA-AES256-SHA (3) eap_tls: (TLS) [46] DHE-RSA-AES256-SHA (3) eap_tls: (TLS) [47] DHE-DSS-AES256-SHA (3) eap_tls: (TLS) [48] DHE-RSA-CAMELLIA256-SHA (3) eap_tls: (TLS) [49] DHE-DSS-CAMELLIA256-SHA (3) eap_tls: (TLS) [50] AECDH-AES256-SHA (3) eap_tls: (TLS) [51] ADH-AES256-SHA (3) eap_tls: (TLS) [52] ADH-CAMELLIA256-SHA (3) eap_tls: (TLS) [53] ECDHE-ECDSA-AES128-SHA (3) eap_tls: (TLS) [54] ECDHE-RSA-AES128-SHA (3) eap_tls: (TLS) [55] DHE-RSA-AES128-SHA (3) eap_tls: (TLS) [56] DHE-DSS-AES128-SHA (3) eap_tls: (TLS) [57] DHE-RSA-CAMELLIA128-SHA (3) eap_tls: (TLS) [58] DHE-DSS-CAMELLIA128-SHA (3) eap_tls: (TLS) [59] AECDH-AES128-SHA (3) eap_tls: (TLS) [60] ADH-AES128-SHA (3) eap_tls: (TLS) [61] ADH-CAMELLIA128-SHA (3) eap_tls: (TLS) [62] AES256-GCM-SHA384 (3) eap_tls: (TLS) [63] AES256-CCM (3) eap_tls: (TLS) [64] ARIA256-GCM-SHA384 (3) eap_tls: (TLS) [65] AES128-GCM-SHA256 (3) eap_tls: (TLS) [66] AES128-CCM (3) eap_tls: (TLS) [67] ARIA128-GCM-SHA256 (3) eap_tls: (TLS) [68] AES256-SHA256 (3) eap_tls: (TLS) [69] CAMELLIA256-SHA256 (3) eap_tls: (TLS) [70] AES128-SHA256 (3) eap_tls: (TLS) [71] CAMELLIA128-SHA256 (3) eap_tls: (TLS) [72] SRP-DSS-AES-256-CBC-SHA (3) eap_tls: (TLS) [73] SRP-RSA-AES-256-CBC-SHA (3) eap_tls: (TLS) [74] SRP-AES-256-CBC-SHA (3) eap_tls: (TLS) [75] AES256-SHA (3) eap_tls: (TLS) [76] CAMELLIA256-SHA (3) eap_tls: (TLS) [77] SRP-DSS-AES-128-CBC-SHA (3) eap_tls: (TLS) [78] SRP-RSA-AES-128-CBC-SHA (3) eap_tls: (TLS) [79] SRP-AES-128-CBC-SHA (3) eap_tls: (TLS) [80] AES128-SHA (3) eap_tls: (TLS) [81] CAMELLIA128-SHA (3) eap_tls: (TLS) TLS - Client preferred ciphers (by priority) (3) eap_tls: (TLS) [0] ECDHE-RSA-AES256-SHA (3) eap_tls: (TLS) [1] ECDHE-RSA-AES128-SHA (3) eap_tls: (TLS) [2] DHE-RSA-AES256-SHA (3) eap_tls: (TLS) [3] DHE-RSA-AES128-SHA (3) eap_tls: (TLS) [4] AES256-SHA (3) eap_tls: (TLS) [5] AES128-SHA (3) eap_tls: (TLS) [6] ECDHE-RSA-AES256-SHA384 (3) eap_tls: (TLS) [7] ECDHE-RSA-AES128-SHA256 (3) eap_tls: (TLS) [8] DHE-RSA-AES256-SHA256 (3) eap_tls: (TLS) [9] DHE-RSA-AES128-SHA256 (3) eap_tls: (TLS) [10] AES256-SHA256 (3) eap_tls: (TLS) [11] AES128-SHA256 (3) eap_tls: (TLS) [12] ECDHE-RSA-AES256-GCM-SHA384 (3) eap_tls: (TLS) [13] ECDHE-RSA-AES128-GCM-SHA256 (3) eap_tls: (TLS) [14] DHE-RSA-AES256-GCM-SHA384 (3) eap_tls: (TLS) [15] DHE-RSA-AES128-GCM-SHA256 (3) eap_tls: (TLS) [16] AES256-GCM-SHA384 (3) eap_tls: (TLS) [17] AES128-GCM-SHA256 ERROR: (3) eap_tls: (TLS) Failed reading from OpenSSL: ssl/statem/statem_srvr.c[2312]:error:0A0000C1:lib(20)::reason(193) ERROR: (3) eap_tls: (TLS) System call (I/O) error (-1) ERROR: (3) eap_tls: (TLS) EAP Receive handshake failed during operation ERROR: (3) eap_tls: [eaptls process] = fail ERROR: (3) eap: Failed continuing EAP TLS (13) session. EAP sub-module failed (3) eap: Sending EAP Failure (code 4) ID 1 length 4 (3) eap: Failed in EAP select (3) modsingle[authenticate]: returned from eap (rlm_eap) (3) [eap] = invalid (3) } # authenticate = invalid (3) Failed to authenticate the user (3) Using Post-Auth-Type Reject (3) Post-Auth-Type sub-section not found. Ignoring. (3) Login incorrect (eap_tls: (TLS) TLS - Alert write:fatal:handshake failure): [as] (from client ac port 29 cli 5a5b3135062e) (3) Delaying response for 5.000000 seconds Thread 2 waiting to be assigned a request Waking up in 4.6 seconds. (3) Sending delayed response (3) Sent Access-Reject Id 0 from 192.168.2.1:1812 to 192.168.2.2:44444 length 44 (3) EAP-Message = 0x04010004 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) Cleaning up request packet ID 0 with timestamp +131 due to done Ready to process requests

2 2

FreeRadius ldap queries are not executed
by Matvey Teplov 21 Mar '25

21 Mar '25

Hi, I am having a problem making FreeRADIUS querying for the group presence. Generally, authentication consists of two stages. The first stage is verifying the user with the RADIUS server via proxy; in the second stage, freeradius has to confirm if the user belongs to one of the groups defined LDAP and populate VSA's. So, the first stage ran successfully, LDAP connections were established at the startup, but pulling groups at the second stage is not happening. The log is: (6) Received Access-Request Id 239 from 127.0.0.1:55766 to 127.0.0.1:1825 length 101 (6) Message-Authenticator = 0xc70aa4ebf93116a15e305fbe97e49bb8 (6) User-Name = "generic-ms-user" (6) User-Password = "*********" (6) NAS-IP-Address = 172.17.0.6 (6) NAS-Port = 1 (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) [preprocess] = ok (6) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (6) auth_log: --> /var/log/freeradius/radacct/127.0.0.1/auth-detail-20250311 (6) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/127.0.0.1/auth-detail-20250311 (6) auth_log: EXPAND %t (6) auth_log: --> Tue Mar 11 12:38:06 2025 (6) [auth_log] = ok (6) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (6) pap: WARNING: Authentication will fail unless a "known good" password is available (6) [pap] = noop (6) update control { (6) Proxy-to-Realm := "radius_server" (6) } # update control = noop (6) } # authorize = ok (6) Starting proxy to home server 100.127.1.24 port 1823 (6) server default { (6) } (6) Proxying request to home server 100.127.1.24 port 1823 timeout 10.000000 (6) Sent Access-Request Id 171 from 0.0.0.0:57934 to 100.127.1.24:1823 length 112 (6) Message-Authenticator = 0xc70aa4ebf93116a15e305fbe97e49bb8 (6) User-Name = "generic-ms-user" (6) User-Password = "*********" (6) NAS-IP-Address = 172.17.0.6 (6) NAS-Port = 1 (6) Event-Timestamp = "Mar 11 2025 12:38:06 UTC" (6) Proxy-State = 0x323339 Waking up in 0.3 seconds. (6) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! (6) BlastRADIUS check: Received packet without Message-Authenticator from home_server radius_server1 (6) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! (6) The packet does not contain Message-Authenticator, which is a security issue (6) UPGRADE THE HOME SERVER AS YOUR NETWORK IS VULNERABLE TO THE BLASTRADIUS ATTACK. (6) Once the home server is upgraded, set "require_message_authenticator = true" for home_server radius_server1 (6) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! (6) Clearing existing &reply: attributes (6) Received Access-Accept Id 171 from 100.127.1.24:1823 to 172.17.0.6:57934 length 25 (6) Proxy-State = 0x323339 (6) server default { (6) } (6) Found Auth-Type = Accept (6) Auth-Type = Accept, accepting the user (6) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (6) post-auth { (6) [ldap_server] = noop (6) if (&control:LDAP-Group == "Radius_Admin_Group") { (6) ERROR: Failed retrieving values required to evaluate condition (6) elsif (&control:LDAP-Group == "Radius_ReadOnly_Group") { (6) ERROR: Failed retrieving values required to evaluate condition (6) elsif (&control:LDAP-Group == "Radius_ReadWrite_Group") { (6) ERROR: Failed retrieving values required to evaluate condition (6) else { (6) update control { (6) Auth-Type := Reject (6) } # update control = noop (6) update reply { (6) Reply-Message := "Access denied: Unauthorized group." (6) } # update reply = noop (6) } # else = noop (6) } # post-auth = noop (6) Login OK: [generic-ms-user] (from client localhost port 1) (6) Sent Access-Accept Id 239 from 127.0.0.1:1825 to 127.0.0.1:55766 length 0 (6) Reply-Message := "Access denied: Unauthorized group." (6) Finished request Waking up in 4.9 seconds. Any ideas will be appreciated! Best regards Matvey Teplov

3 4

Error when starting FreeRadius
by Leandro Tavares 21 Mar '25

21 Mar '25

Good morning, I am migrating the FreeRadius server from version 2.2.8 to a new machine running RHEL9 with FreeRadius 3.0.21-43, but when I try to start the services I get the following error: /etc/raddb/radiusd.conf[167]: Configuration item "user" is deprecated /etc/raddb/radiusd.conf[0]: Cannot use deprecated configuration item "user" radiusd: ERROR - Failed to parse user/group information. Has anyone else experienced this problem or have a solution? Thank you.

2 1

fr3 as squid?
by Dariusz Bloch 20 Mar '25

20 Mar '25

Hello. Does somebody try to use FR3 to act like squid proxy? Is this even possible? I want to block all websites and make exceptions(allow) for some specific sites. In generally, I try to replace AD and use LDAP/Samba4, maybe freeradius acting as hub to authenticate against external LDAP and authorize to resources(files, sites etc)... It's just ideas... -- Z poważaniem, *Dariusz Bloch* Specjalista ds. IT tel. +48 22 420 57 56 kom. +48 665 678 605 dariusz.bloch(a)telbridge.pl www.telbridge.pl <http://www.telbridge.pl> <http://www.telbridge.pl> <http://www.telbridge.pl> <http://www.telbridge.pl> Telbridge sp. z o.o. sp. k. ul. Zagnańska 49, 25-528 Kielce, NIP: 959-153-09-86. Sąd Rejonowy w Kielcach, X Wydział Gospodarczy KRS, KRS 0000788347, Oddział w Toruniu, ul. Gdańska 4a, II p. 87-100 Toruń, tel. +48 22 420 56 60, tel./fax +48 22 420 56 55

3 3

match replay log with the request and log rejected request
by Peter Hudec 19 Mar '25

19 Mar '25

Hello, I would like to ask how to configure the reply log that way I;m able to apir it with the request. As there is no username or some knd of session id in the reoply, the default reply_log configuration just logs the reply attributes. In this scenario I'm not able to pair it with the original request ;( At this time the logging is just into files. By default, the Rejected request are not logged, what should be changed to add logging for them? regards Peter

2 3

require_message_authenticator = auto
by David Herselman 18 Mar '25

18 Mar '25

Hi, I'd like to thank everyone that contributes to the RADIUS standards and particularly FreeRADIUS developers for their tireless efforts. I realise that the Blast RADIUS protocol vulnerability (CVE-2024-3596) could have been avoided should the standards have adopted recommendations put forward in the past, it must be very frustrating to work on things to have users asking questions more than a year later. We're diligently upgrading vendor equipment to support message authenticator, where CheckPoint, FortiNet and MikroTik have recently backported support to LTS versions. Whilst security devices (eg firewalls) have unique client definitions to match fixed IPs, we have approximately 1500+ routers that live in non-publicly accessible management subnets, although these are arguably still public as they are reachable from client environments. The main issue with these is that they connect via LTE mobile APNs. We configured client prefix definitions that cover hundreds of routes (eg 198.19.200.0/23), where we can't simply blindly upgrade these in large batches, requiring client scheduled maintenance windows. Due to how mobile operators assign IPs out of pools for the APNs, it's not possible for us to configure individual client statements. Any possibility of there being an additional option to augment the auto setting? So that each individual IP in a defined range is flipped to enforcing message-authenticator? Let me try to explain in way of example, let's say we have a client configured as follows: client managed.routers { ipaddr = 198.19.200.0 netmask = 23 secret = **************** nastype = cisco require_message_authenticator = auto-per-IP } We're hoping that other networks would benefit from an option whereby FreeRADIUS would possibly use a bloom filter to mark individual IPs in those subnets to requiring message authenticator should they receive a request which includes the M-A attribute. We would actually prefer FreeRADIUS to additionally flip on enforcement should a request contains the M-A attribute, irrespective of whether or not it's the first packet to arrive after FreeRADIUS was restarted. This way technicians could schedule and upgrade equipment and thereafter enforce M-A validation without having to reach out to people that have access to restart FreeRADIUS thereafter. It would also inconvenience technicians, forcing them to use special jump hosts that log in using _break glass_ local admin accounts without revealing those credentials in the process (we're hoping that this would motivate technicians to add routers to a _to be upgraded_ list to catch those that fall through cracks). Any suggestions from anyone that's walked this road before? Have we completely missed the boat or simply unaware of clever ways to handle this scenario? Regards David Herselman

2 1

RADIUS Conference 2025
by Linux Threads 18 Mar '25

18 Mar '25

Hi Guys. I tried joining the event, and got this error "event is now full", are you guys going to upload the Conference to youtube or other video hosting service? RADIUS Conference 2025 - Securing the Intranet and Extranet - Session 3 Live Join event or By registering, you agree to the Livestorm Terms and Conditions and Privacy Policy. * We're sorry but this event is now full. To ask for more seats, contact the host. Regards,

3 4

[POLL] Escaping behaviour in SQL/LDAP/regexes
by Arran Cudbard-Bell 16 Mar '25

16 Mar '25

For FreeRADIUS v4 we have a new method of automatically escaping values used in various DSLs (Domain Specific Languages) like SQL, LDAP and regular expressions. We'd appreciate it if FreeRADIUS users could look over the policy snippets below and indicate what you expect the SQL statement to be _as executed_ (not the result of evaluating the statement). Assume the value of User-Name is: Bob'; DROP TABLE users;-- Possible answers: a) SELECT * FROM my-table WHERE Service-Type = 'Framed-User' AND User-Name = 'Bob'; DROP TABLE users;--' b) SELECT * FROM my-table WHERE Service-Type = \'Framed-User\' AND User-Name = 'Bob\'; DROP TABLE users;--' c) SELECT * FROM my-table WHERE Service-Type = 'Framed-User' AND User-Name = 'Bob\'; DROP TABLE users;--' d) Other. Please write expected, expanded, SQL statement. Do not return to previous statements and alter answers. The purpose of this poll is to determine what user's expect behaviour to be, prior to seeing example code or reading documentation. 1) recv authorize { string sql_condition sql_condition = "Service-Type = 'Framed-User'" %sql.query("SELECT * FROM my-table WHERE %{sql_condition} AND User-Name = '%{User-Name}'") } 2) recv authorize { string sql_condition sql_condition = %sql.safe("Service-Type = 'Framed-User'") %sql.query("SELECT * FROM my-table WHERE %{sql_condition} AND User-Name = '%{User-Name}'") } 3) recv authorize { string sql_condition sql_condition = "Service-Type = 'Framed-User'" %sql.query("SELECT * FROM my-table WHERE %sql.safe(%{sql_condition}) AND User-Name = '%{User-Name}'") } 4) recv authorize { string sql_condition sql_condition = "Service-Type = 'Framed-User'" %sql.query("SELECT * FROM my-table WHERE %sql.safe(%{sql_condition}) AND User-Name = '%sql.safe(%{User-Name})'") } Other FreeRADIUS developers please refrain from responding until the 14th of March (when we'll tally results). Many Thanks, -Arran Arran Cudbard-Bell <a.cudbardb(a)freeradius.org> FreeRADIUS Development Team FD31 3077 42EC 7FCD 32FE 5EE2 56CF 27F9 30A8 CAA2

5 12

request: update dictionary.alteon
by Stefano Mason 11 Mar '25

11 Mar '25

Dear maintainer, please update with the following line the dictionary.alteon: VALUE Alteon-Service-Type Alteon-admin 6 as reported in the manual... here an example on page 65 https://netmarket.oss-cn-hangzhou.aliyuncs.com/2029985f4fad4aef8fc3d7f2f390… Thanks a bunch. Stefano

2 1

Difficulties trying bind as user to openLDAP
by t5elrues elrues 11 Mar '25

11 Mar '25

Hello, I did try to check on the internet and also found some threads regarding similar issues that I've tried to use but have been unsuccessful in resolving my issues. I'm setting up a freeradius 3.2.1 on a Debian 12 to bring eduroam service to a high school which is using an OpenLDAP, no microsoft infrastructure behind other than final clients with their laptops. Did try multiple configurations to make it work without success. OpenLDAP has userPassword encrypted in SSHA1 format, which makes it difficult to be compatible with all available authentication methods. I was successful on setting it with EAP-TTLS-GTC and as able to retrieve userPassword and validate MacOS, iOS and Android devices, but couldn't validate Windows devices without a 3rd party software that highschool doesn't want to use. EAP-TTLS-PAP was not allowing iOS devices to validate as they always tried to use mschapv2 with that configuration. So now I've been trying to do bind as user against LDAP using EAP-TTLS-PAP but can't manage to force (Android, iOS and MacOS) devices to use this configuration to validate and always try to default to mschapv2. Windows doesn't even try to bind to LDAP. I can see on the debug log it uses auth-type = eap and calls submodule eap_ttls which I guess should be correct, but then I see a EAP NAK that forces to use eap_mschapv2 even though I think I've commented it to not be used in the configuration. FreeRADIUS Version 3.2.1 Copyright (C) 1999-2022 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/force_pap including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/filter including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } recv_coa { } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm ie.edu { authhost = LOCAL } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.0.209 { ipaddr = 10.0.0.209 require_message_authenticator = no secret = <<< secret >>> shortname = "radius2" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client MiFibraAB01 { ipaddr = 10.0.0.0/20 require_message_authenticator = no secret = <<< secret >>> shortname = "APsNetwork2" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = LDAP # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "ldaps://ldap.ie.edu:636" identity = "cn=freeradius_read,ou=Special Users,dc=ie,dc=edu" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "ou=Users,dc=ie,dc=edu" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { ca_file = "/etc/freeradius/3.0/certs/ca_bundle2023.pem" start_tls = no require_cert = "demand" } } Creating attribute LDAP-Group # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/3.0/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } instantiate { } # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "pap" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20513 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.ie.edu:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.ie.edu:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.ie.edu:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.ie.edu:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.ie.edu:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/coa # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:345 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 44386 Listening on proxy address :: port 52350 Ready to process requests (0) Received Access-Request Id 91 from 10.0.8.4:61706 to 10.0.0.209:1812 length 386 (0) User-Name = "eduroam(a)ie.edu" (0) NAS-Port = 500 (0) Service-Type = Framed-User (0) Framed-Protocol = PPP (0) Calling-Station-Id = "163f-2583-85bf" (0) NAS-Identifier = "controller1" (0) NAS-Port-Type = Wireless-802.11 (0) NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500" (0) EAP-Message = 0x02af001e01656475726f616d2e7465737440657363692e7570662e656475 (0) Message-Authenticator = 0x4fd7146d941f5d5411803ee18d774dfc (0) Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01" (0) NAS-IP-Address = 10.0.8.4 (0) Framed-MTU = 1500 (0) Acct-Session-Id = "control0000000000050094df6a010035b" (0) WLAN-Pairwise-Cipher = 0 (0) WLAN-Group-Cipher = 0 (0) WLAN-AKM-Suite = 0 (0) WLAN-Group-Mgmt-Cipher = 0 (0) Huawei-Startup-Stamp = 1648044398 (0) Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf" (0) Huawei-Connect-ID = 4955 (0) Huawei-Version = "Huawei AC6005-8" (0) Huawei-Product-ID = "AC" (0) Huawei-Loopback-Address = "0006-F4B0-96F0" (0) Huawei-User-Mac = "\000\000\000\001" (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "ie.edu" for User-Name = "eduroam(a)ie.edu" (0) suffix: Found realm "ie.edu" (0) suffix: Adding Stripped-User-Name = "eduroam" (0) suffix: Adding Realm = "ie.edu" (0) suffix: Authentication realm is LOCAL (0) [suffix] = ok (0) eap: Peer sent EAP Response (code 2) ID 175 length 30 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: (TLS) Initiating new session (0) eap: Sending EAP Request (code 1) ID 176 length 6 (0) eap: EAP session adding &reply:State = 0x83ceeacb837effc5 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) session-state: Saving cached attributes (0) Framed-MTU = 994 (0) Sent Access-Challenge Id 91 from 10.0.0.209:1812 to 10.0.8.4:61706 length 64 (0) EAP-Message = 0x01b000061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x83ceeacb837effc5a7029ef06b10891f (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 92 from 10.0.8.4:61706 to 10.0.0.209:1812 length 541 (1) User-Name = "eduroam(a)ie.edu" (1) NAS-Port = 500 (1) Service-Type = Framed-User (1) Framed-Protocol = PPP (1) Calling-Station-Id = "163f-2583-85bf" (1) NAS-Identifier = "controller1" (1) NAS-Port-Type = Wireless-802.11 (1) NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500" (1) State = 0x83ceeacb837effc5a7029ef06b10891f (1) EAP-Message = 0x02b000a115800000009716030100920100008e030367caee0a4266212875f7c38f3428ece36f692c5be6d3248ebe57286d44d3446600002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000 (1) Message-Authenticator = 0x546749c048c7c8de56c983ae232d246e (1) Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01" (1) Login-IP-Host = 0.0.0.0 (1) NAS-IP-Address = 10.0.8.4 (1) Framed-MTU = 1500 (1) Acct-Session-Id = "control0000000000050094df6a010035b" (1) WLAN-Pairwise-Cipher = 0 (1) WLAN-Group-Cipher = 0 (1) WLAN-AKM-Suite = 0 (1) WLAN-Group-Mgmt-Cipher = 0 (1) Huawei-Startup-Stamp = 1648044398 (1) Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf" (1) Huawei-Connect-ID = 4955 (1) Huawei-Version = "Huawei AC6005-8" (1) Huawei-Product-ID = "AC" (1) Huawei-Loopback-Address = "0006-F4B0-96F0" (1) Huawei-User-Mac = "\000\000\000\001" (1) Restoring &session-state (1) &session-state:Framed-MTU = 994 (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: Looking up realm "ie.edu" for User-Name = "eduroam(a)ie.edu" (1) suffix: Found realm "ie.edu" (1) suffix: Adding Stripped-User-Name = "eduroam" (1) suffix: Adding Realm = "ie.edu" (1) suffix: Authentication realm is LOCAL (1) [suffix] = ok (1) eap: Peer sent EAP Response (code 2) ID 176 length 161 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x83ceeacb837effc5 (1) eap: Finished EAP session with state 0x83ceeacb837effc5 (1) eap: Previous EAP request found for state 0x83ceeacb837effc5, released from the list (1) eap: Peer sent packet with method EAP TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Authenticate (1) eap_ttls: (TLS) EAP Peer says that the final record size will be 151 bytes (1) eap_ttls: (TLS) EAP Got all data (151 bytes) (1) eap_ttls: (TLS) Handshake state - before SSL initialization (1) eap_ttls: (TLS) Handshake state - Server before SSL initialization (1) eap_ttls: (TLS) Handshake state - Server before SSL initialization (1) eap_ttls: (TLS) recv TLS 1.3 Handshake, ClientHello (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client hello (1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerHello (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server hello (1) eap_ttls: (TLS) send TLS 1.2 Handshake, Certificate (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write certificate (1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerKeyExchange (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write key exchange (1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerHelloDone (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server done (1) eap_ttls: (TLS) Server : Need to read more data: SSLv3/TLS write server done (1) eap_ttls: (TLS) In Handshake Phase (1) eap: Sending EAP Request (code 1) ID 177 length 1004 (1) eap: EAP session adding &reply:State = 0x83ceeacb827fffc5 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) session-state: Saving cached attributes (1) Framed-MTU = 994 (1) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (1) Sent Access-Challenge Id 92 from 10.0.0.209:1812 to 10.0.8.4:61706 length 1068 (1) EAP-Message = 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 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x83ceeacb827fffc5a7029ef06b10891f (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 93 from 10.0.8.4:61706 to 10.0.0.209:1812 length 386 (2) User-Name = "eduroam(a)ie.edu" (2) NAS-Port = 500 (2) Service-Type = Framed-User (2) Framed-Protocol = PPP (2) Calling-Station-Id = "163f-2583-85bf" (2) NAS-Identifier = "controller1" (2) NAS-Port-Type = Wireless-802.11 (2) NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500" (2) State = 0x83ceeacb827fffc5a7029ef06b10891f (2) EAP-Message = 0x02b100061500 (2) Message-Authenticator = 0xd9ad187958da266a5e8c542f6c5ca5c1 (2) Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01" (2) Login-IP-Host = 0.0.0.0 (2) NAS-IP-Address = 10.0.8.4 (2) Framed-MTU = 1500 (2) Acct-Session-Id = "control0000000000050094df6a010035b" (2) WLAN-Pairwise-Cipher = 0 (2) WLAN-Group-Cipher = 0 (2) WLAN-AKM-Suite = 0 (2) WLAN-Group-Mgmt-Cipher = 0 (2) Huawei-Startup-Stamp = 1648044398 (2) Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf" (2) Huawei-Connect-ID = 4955 (2) Huawei-Version = "Huawei AC6005-8" (2) Huawei-Product-ID = "AC" (2) Huawei-Loopback-Address = "0006-F4B0-96F0" (2) Huawei-User-Mac = "\000\000\000\001" (2) Restoring &session-state (2) &session-state:Framed-MTU = 994 (2) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: Looking up realm "ie.edu" for User-Name = "eduroam(a)ie.edu" (2) suffix: Found realm "ie.edu" (2) suffix: Adding Stripped-User-Name = "eduroam" (2) suffix: Adding Realm = "ie.edu" (2) suffix: Authentication realm is LOCAL (2) [suffix] = ok (2) eap: Peer sent EAP Response (code 2) ID 177 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x83ceeacb827fffc5 (2) eap: Finished EAP session with state 0x83ceeacb827fffc5 (2) eap: Previous EAP request found for state 0x83ceeacb827fffc5, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: (TLS) Peer ACKed our handshake fragment (2) eap: Sending EAP Request (code 1) ID 178 length 241 (2) eap: EAP session adding &reply:State = 0x83ceeacb817cffc5 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) session-state: Saving cached attributes (2) Framed-MTU = 994 (2) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (2) Sent Access-Challenge Id 93 from 10.0.0.209:1812 to 10.0.8.4:61706 length 299 (2) EAP-Message = 0x01b200f11580000004c91758e8bab4ea88db791430ebf132ba7944c9b097d2df9eec6738fbbe4d544ea9082d59c2b1161df428dee0ab62765e093945c909de42fdee283b6f5656548f9dcbce73f42464ae2ebb7e0a59b5551cf2811534c381fd55f08ae62a3875c6f448d5ab543bdc22a19636d9b6c48f80e576592e278d8adfcdfeb69f22fe49abcb6a5140d472030c6b6d29c05c9589152eb1a17742acce8012f4e251495b29a229c87b8144085312eb6b76c72bca177d58e3585549e5c2d8979211ac1eb2c1e17de801da1bd0fb76c65b28acbea8f0872445ce8371e57c0a79f66bce27868c6216030300040e000000 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x83ceeacb817cffc5a7029ef06b10891f (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 94 from 10.0.8.4:61706 to 10.0.0.209:1812 length 516 (3) User-Name = "eduroam(a)ie.edu" (3) NAS-Port = 500 (3) Service-Type = Framed-User (3) Framed-Protocol = PPP (3) Calling-Station-Id = "163f-2583-85bf" (3) NAS-Identifier = "controller1" (3) NAS-Port-Type = Wireless-802.11 (3) NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500" (3) State = 0x83ceeacb817cffc5a7029ef06b10891f (3) EAP-Message = 0x02b2008815800000007e16030300461000004241046bb9bf48b33ca5b7774d6f3bae8bf37284d42a0738d0c475f120ec34095c698cd9741bd3370ca7c39dbb760454b0a81cd5b406089daca4c8fc0d002ebdddd4f314030300010116030300287d4d14d321bdde353da05c5fffbbbfd20eb41341c1c31f49d1b62265cc0c7880fea8727a1ea8a064 (3) Message-Authenticator = 0x5d92bc3611f520a5400c2c6874da2f0f (3) Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01" (3) Login-IP-Host = 0.0.0.0 (3) NAS-IP-Address = 10.0.8.4 (3) Framed-MTU = 1500 (3) Acct-Session-Id = "control0000000000050094df6a010035b" (3) WLAN-Pairwise-Cipher = 0 (3) WLAN-Group-Cipher = 0 (3) WLAN-AKM-Suite = 0 (3) WLAN-Group-Mgmt-Cipher = 0 (3) Huawei-Startup-Stamp = 1648044398 (3) Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf" (3) Huawei-Connect-ID = 4955 (3) Huawei-Version = "Huawei AC6005-8" (3) Huawei-Product-ID = "AC" (3) Huawei-Loopback-Address = "0006-F4B0-96F0" (3) Huawei-User-Mac = "\000\000\000\001" (3) Restoring &session-state (3) &session-state:Framed-MTU = 994 (3) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: Looking up realm "ie.edu" for User-Name = "eduroam(a)ie.edu" (3) suffix: Found realm "ie.edu" (3) suffix: Adding Stripped-User-Name = "eduroam" (3) suffix: Adding Realm = "ie.edu" (3) suffix: Authentication realm is LOCAL (3) [suffix] = ok (3) eap: Peer sent EAP Response (code 2) ID 178 length 136 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x83ceeacb817cffc5 (3) eap: Finished EAP session with state 0x83ceeacb817cffc5 (3) eap: Previous EAP request found for state 0x83ceeacb817cffc5, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: (TLS) EAP Peer says that the final record size will be 126 bytes (3) eap_ttls: (TLS) EAP Got all data (126 bytes) (3) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server done (3) eap_ttls: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange (3) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client key exchange (3) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read change cipher spec (3) eap_ttls: (TLS) recv TLS 1.2 Handshake, Finished (3) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read finished (3) eap_ttls: (TLS) send TLS 1.2 ChangeCipherSpec (3) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec (3) eap_ttls: (TLS) send TLS 1.2 Handshake, Finished (3) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write finished (3) eap_ttls: (TLS) Handshake state - SSL negotiation finished successfully (3) eap_ttls: (TLS) Connection Established (3) eap_ttls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (3) eap_ttls: TLS-Session-Version = "TLS 1.2" (3) eap: Sending EAP Request (code 1) ID 179 length 61 (3) eap: EAP session adding &reply:State = 0x83ceeacb807dffc5 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) session-state: Saving cached attributes (3) Framed-MTU = 994 (3) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (3) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (3) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (3) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (3) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (3) TLS-Session-Version = "TLS 1.2" (3) Sent Access-Challenge Id 94 from 10.0.0.209:1812 to 10.0.8.4:61706 length 119 (3) EAP-Message = 0x01b3003d158000000033140303000101160303002887896bbb5b418377007a61b1308e7b3f44cf028c7cb553442e3c54996b0d95a69eba081afa05664d (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x83ceeacb807dffc5a7029ef06b10891f (3) Finished request Waking up in 4.8 seconds. (4) Received Access-Request Id 95 from 10.0.8.4:61706 to 10.0.0.209:1812 length 459 (4) User-Name = "eduroam(a)ie.edu" (4) NAS-Port = 500 (4) Service-Type = Framed-User (4) Framed-Protocol = PPP (4) Calling-Station-Id = "163f-2583-85bf" (4) NAS-Identifier = "controller1" (4) NAS-Port-Type = Wireless-802.11 (4) NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500" (4) State = 0x83ceeacb807dffc5a7029ef06b10891f (4) EAP-Message = 0x02b3004f15800000004517030300407d4d14d321bdde36253a10334b98fd2a3f5130f71511444b5f57025f182c628c9ef3ec3bcb26d65d8ffce2f2bbfe961f74a2065564e7fdde54dd83c95cb6e78f (4) Message-Authenticator = 0x57e3562480164f05e28f781e3ba18b10 (4) Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01" (4) Login-IP-Host = 0.0.0.0 (4) NAS-IP-Address = 10.0.8.4 (4) Framed-MTU = 1500 (4) Acct-Session-Id = "control0000000000050094df6a010035b" (4) WLAN-Pairwise-Cipher = 0 (4) WLAN-Group-Cipher = 0 (4) WLAN-AKM-Suite = 0 (4) WLAN-Group-Mgmt-Cipher = 0 (4) Huawei-Startup-Stamp = 1648044398 (4) Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf" (4) Huawei-Connect-ID = 4955 (4) Huawei-Version = "Huawei AC6005-8" (4) Huawei-Product-ID = "AC" (4) Huawei-Loopback-Address = "0006-F4B0-96F0" (4) Huawei-User-Mac = "\000\000\000\001" (4) Restoring &session-state (4) &session-state:Framed-MTU = 994 (4) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (4) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (4) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (4) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (4) &session-state:TLS-Session-Version = "TLS 1.2" (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: Looking up realm "ie.edu" for User-Name = "eduroam(a)ie.edu" (4) suffix: Found realm "ie.edu" (4) suffix: Adding Stripped-User-Name = "eduroam" (4) suffix: Adding Realm = "ie.edu" (4) suffix: Authentication realm is LOCAL (4) [suffix] = ok (4) eap: Peer sent EAP Response (code 2) ID 179 length 79 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x83ceeacb807dffc5 (4) eap: Finished EAP session with state 0x83ceeacb807dffc5 (4) eap: Previous EAP request found for state 0x83ceeacb807dffc5, released from the list (4) eap: Peer sent packet with method EAP TTLS (21) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: Authenticate (4) eap_ttls: (TLS) EAP Peer says that the final record size will be 69 bytes (4) eap_ttls: (TLS) EAP Got all data (69 bytes) (4) eap_ttls: Session established. Proceeding to decode tunneled attributes (4) eap_ttls: Got tunneled request (4) eap_ttls: EAP-Message = 0x0200001e01656475726f616d2e7465737440657363692e7570662e656475 (4) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (4) eap_ttls: Got tunneled identity of eduroam(a)ie.edu (4) eap_ttls: Sending tunneled request (4) Virtual server inner-tunnel received request (4) EAP-Message = 0x0200001e01656475726f616d2e7465737440657363692e7570662e656475 (4) FreeRADIUS-Proxied-To = 127.0.0.1 (4) User-Name = "eduroam(a)ie.edu" (4) NAS-Port = 500 (4) Service-Type = Framed-User (4) Framed-Protocol = PPP (4) Calling-Station-Id = "163f-2583-85bf" (4) NAS-Identifier = "controller1" (4) NAS-Port-Type = Wireless-802.11 (4) NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500" (4) Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01" (4) Login-IP-Host = 0.0.0.0 (4) NAS-IP-Address = 10.0.8.4 (4) Framed-MTU = 1500 (4) Acct-Session-Id = "control0000000000050094df6a010035b" (4) WLAN-Pairwise-Cipher = 0 (4) WLAN-Group-Cipher = 0 (4) WLAN-AKM-Suite = 0 (4) WLAN-Group-Mgmt-Cipher = 0 (4) Huawei-Startup-Stamp = 1648044398 (4) Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf" (4) Huawei-Connect-ID = 4955 (4) Huawei-Version = "Huawei AC6005-8" (4) Huawei-Product-ID = "AC" (4) Huawei-Loopback-Address = "0006-F4B0-96F0" (4) Huawei-User-Mac = "\000\000\000\001" (4) Event-Timestamp = "Mar 7 2025 14:00:58 CET" (4) WARNING: Outer and inner identities are the same. User privacy is compromised. (4) server inner-tunnel { (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (4) authorize { rlm_ldap (ldap): Reserved connection (0) (4) ldap: EXPAND (mail=%{User-Name}) (4) ldap: --> (mail=eduroam(a)ie.edu) (4) ldap: Performing search in "ou=Users,dc=ie,dc=edu" with filter "(mail=eduroam(a)ie.edu)", scope "sub" (4) ldap: Waiting for search result... (4) ldap: User object found at DN "uid=etest,ou=Users,dc=ie,dc=edu" (4) ldap: Processing user attributes rlm_ldap (ldap): Released connection (0) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.ie.edu:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (4) [ldap] = ok (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = ok (4) } # policy filter_username = ok (4) suffix: Checking for suffix after "@" (4) suffix: Looking up realm "ie.edu" for User-Name = "eduroam(a)ie.edu" (4) suffix: Found realm "ie.edu" (4) suffix: Adding Stripped-User-Name = "eduroam" (4) suffix: Adding Realm = "ie.edu" (4) suffix: Authentication realm is LOCAL (4) [suffix] = ok (4) update control { (4) &Proxy-To-Realm := LOCAL (4) } # update control = noop (4) eap: Peer sent EAP Response (code 2) ID 0 length 30 (4) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (4) authenticate { (4) eap: Peer sent packet with method EAP Identity (1) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: (TLS) Initiating new session (4) eap: Sending EAP Request (code 1) ID 1 length 6 (4) eap: EAP session adding &reply:State = 0x5e95050e5e941080 (4) [eap] = handled (4) } # authenticate = handled (4) } # server inner-tunnel (4) Virtual server sending reply (4) EAP-Message = 0x010100061520 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x5e95050e5e9410803cc8846f84059ced (4) eap_ttls: Got tunneled Access-Challenge (4) eap: Sending EAP Request (code 1) ID 180 length 55 (4) eap: EAP session adding &reply:State = 0x83ceeacb877affc5 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) session-state: Saving cached attributes (4) Framed-MTU = 994 (4) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (4) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (4) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (4) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (4) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (4) TLS-Session-Version = "TLS 1.2" (4) Sent Access-Challenge Id 95 from 10.0.0.209:1812 to 10.0.8.4:61706 length 113 (4) EAP-Message = 0x01b4003715800000002d170303002887896bbb5b418378c3c4fa2c30f528fe31d76b07518572dd127c87e43a6f96a5866b26e1716aec06 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x83ceeacb877affc5a7029ef06b10891f (4) Finished request Waking up in 4.8 seconds. (5) Received Access-Request Id 96 from 10.0.8.4:61706 to 10.0.0.209:1812 length 435 (5) User-Name = "eduroam(a)ie.edu" (5) NAS-Port = 500 (5) Service-Type = Framed-User (5) Framed-Protocol = PPP (5) Calling-Station-Id = "163f-2583-85bf" (5) NAS-Identifier = "controller1" (5) NAS-Port-Type = Wireless-802.11 (5) NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500" (5) State = 0x83ceeacb877affc5a7029ef06b10891f (5) EAP-Message = 0x02b4003715800000002d17030300287d4d14d321bdde37ba9a2f3c29c14ada56eb2f249158c7655cf0b4a21d6bfe6c32ea7d65bf77d7ed (5) Message-Authenticator = 0xe6f0c9c460d76d467f0388cd09514e14 (5) Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01" (5) Login-IP-Host = 0.0.0.0 (5) NAS-IP-Address = 10.0.8.4 (5) Framed-MTU = 1500 (5) Acct-Session-Id = "control0000000000050094df6a010035b" (5) WLAN-Pairwise-Cipher = 0 (5) WLAN-Group-Cipher = 0 (5) WLAN-AKM-Suite = 0 (5) WLAN-Group-Mgmt-Cipher = 0 (5) Huawei-Startup-Stamp = 1648044398 (5) Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf" (5) Huawei-Connect-ID = 4955 (5) Huawei-Version = "Huawei AC6005-8" (5) Huawei-Product-ID = "AC" (5) Huawei-Loopback-Address = "0006-F4B0-96F0" (5) Huawei-User-Mac = "\000\000\000\001" (5) Restoring &session-state (5) &session-state:Framed-MTU = 994 (5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (5) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) &session-state:TLS-Session-Version = "TLS 1.2" (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: Looking up realm "ie.edu" for User-Name = "eduroam(a)ie.edu" (5) suffix: Found realm "ie.edu" (5) suffix: Adding Stripped-User-Name = "eduroam" (5) suffix: Adding Realm = "ie.edu" (5) suffix: Authentication realm is LOCAL (5) [suffix] = ok (5) eap: Peer sent EAP Response (code 2) ID 180 length 55 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x5e95050e5e941080 (5) eap: Finished EAP session with state 0x83ceeacb877affc5 (5) eap: Previous EAP request found for state 0x83ceeacb877affc5, released from the list (5) eap: Peer sent packet with method EAP TTLS (21) (5) eap: Calling submodule eap_ttls to process data (5) eap_ttls: Authenticate (5) eap_ttls: (TLS) EAP Peer says that the final record size will be 45 bytes (5) eap_ttls: (TLS) EAP Got all data (45 bytes) (5) eap_ttls: Session established. Proceeding to decode tunneled attributes (5) eap_ttls: Got tunneled request (5) eap_ttls: EAP-Message = 0x02010006031a (5) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (5) eap_ttls: Sending tunneled request (5) Virtual server inner-tunnel received request (5) EAP-Message = 0x02010006031a (5) FreeRADIUS-Proxied-To = 127.0.0.1 (5) User-Name = "eduroam(a)ie.edu" (5) State = 0x5e95050e5e9410803cc8846f84059ced (5) NAS-Port = 500 (5) Service-Type = Framed-User (5) Framed-Protocol = PPP (5) Calling-Station-Id = "163f-2583-85bf" (5) NAS-Identifier = "controller1" (5) NAS-Port-Type = Wireless-802.11 (5) NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500" (5) Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01" (5) Login-IP-Host = 0.0.0.0 (5) NAS-IP-Address = 10.0.8.4 (5) Framed-MTU = 1500 (5) Acct-Session-Id = "control0000000000050094df6a010035b" (5) WLAN-Pairwise-Cipher = 0 (5) WLAN-Group-Cipher = 0 (5) WLAN-AKM-Suite = 0 (5) WLAN-Group-Mgmt-Cipher = 0 (5) Huawei-Startup-Stamp = 1648044398 (5) Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf" (5) Huawei-Connect-ID = 4955 (5) Huawei-Version = "Huawei AC6005-8" (5) Huawei-Product-ID = "AC" (5) Huawei-Loopback-Address = "0006-F4B0-96F0" (5) Huawei-User-Mac = "\000\000\000\001" (5) Event-Timestamp = "Mar 7 2025 14:00:58 CET" (5) WARNING: Outer and inner identities are the same. User privacy is compromised. (5) server inner-tunnel { (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (5) authorize { rlm_ldap (ldap): Reserved connection (1) (5) ldap: EXPAND (mail=%{User-Name}) (5) ldap: --> (mail=eduroam(a)ie.edu) (5) ldap: Performing search in "ou=Users,dc=ie,dc=edu" with filter "(mail=eduroam(a)ie.edu)", scope "sub" (5) ldap: Waiting for search result... (5) ldap: User object found at DN "uid=etest,ou=Users,dc=ie,dc=edu" (5) ldap: Processing user attributes rlm_ldap (ldap): Released connection (1) (5) [ldap] = ok (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = ok (5) } # policy filter_username = ok (5) suffix: Checking for suffix after "@" (5) suffix: Looking up realm "ie.edu" for User-Name = "eduroam(a)ie.edu" (5) suffix: Found realm "ie.edu" (5) suffix: Adding Stripped-User-Name = "eduroam" (5) suffix: Adding Realm = "ie.edu" (5) suffix: Authentication realm is LOCAL (5) [suffix] = ok (5) update control { (5) &Proxy-To-Realm := LOCAL (5) } # update control = noop (5) eap: Peer sent EAP Response (code 2) ID 1 length 6 (5) eap: No EAP Start, assuming it's an on-going EAP conversation (5) [eap] = updated (5) files: users: Matched entry DEFAULT at line 167 (5) [files] = ok rlm_ldap (ldap): Reserved connection (2) (5) ldap: EXPAND (mail=%{User-Name}) (5) ldap: --> (mail=eduroam(a)ie.edu) (5) ldap: Performing search in "ou=Users,dc=ie,dc=edu" with filter "(mail=eduroam(a)ie.edu)", scope "sub" (5) ldap: Waiting for search result... (5) ldap: User object found at DN "uid=etest,ou=Users,dc=ie,dc=edu" (5) ldap: Processing user attributes rlm_ldap (ldap): Released connection (2) (5) [ldap] = ok (5) [expiration] = noop (5) [logintime] = noop (5) [pap] = noop (5) } # authorize = updated (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (5) authenticate { (5) eap: Expiring EAP session with state 0x5e95050e5e941080 (5) eap: Finished EAP session with state 0x5e95050e5e941080 (5) eap: Previous EAP request found for state 0x5e95050e5e941080, released from the list (5) eap: Peer sent packet with method EAP NAK (3) (5) eap: Found mutually acceptable type MSCHAPv2 (26) (5) eap: Calling submodule eap_mschapv2 to process data (5) eap_mschapv2: Issuing Challenge (5) eap: Sending EAP Request (code 1) ID 2 length 42 (5) eap: EAP session adding &reply:State = 0x5e95050e5f971f80 (5) [eap] = handled (5) } # authenticate = handled (5) } # server inner-tunnel (5) Virtual server sending reply (5) Framed-Protocol = PPP (5) Framed-Compression = Van-Jacobson-TCP-IP (5) EAP-Message = 0x0102002a1a0102002510f83233464845fedc7b18038954d18a5f667265657261646975732d332e322e31 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x5e95050e5f971f803cc8846f84059ced (5) eap_ttls: Got tunneled Access-Challenge (5) eap: Sending EAP Request (code 1) ID 181 length 91 (5) eap: EAP session adding &reply:State = 0x83ceeacb867bffc5 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) session-state: Saving cached attributes (5) Framed-MTU = 994 (5) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (5) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (5) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (5) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (5) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) TLS-Session-Version = "TLS 1.2" (5) Sent Access-Challenge Id 96 from 10.0.0.209:1812 to 10.0.8.4:61706 length 149 (5) EAP-Message = 0x01b5005b158000000051170303004c87896bbb5b418379d862073808ce4afae3d814a930374f7cab478c4da03d28ce86d891ae6c92921b5bddd5cf3174a2dcd82255634bf6a49f6e640ec52a1fd9e1ff67be1112403ec22e66f068 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x83ceeacb867bffc5a7029ef06b10891f (5) Finished request Waking up in 4.8 seconds. (6) Received Access-Request Id 97 from 10.0.8.4:61706 to 10.0.0.209:1812 length 511 (6) User-Name = "eduroam(a)ie.edu" (6) NAS-Port = 500 (6) Service-Type = Framed-User (6) Framed-Protocol = PPP (6) Calling-Station-Id = "163f-2583-85bf" (6) NAS-Identifier = "controller1" (6) NAS-Port-Type = Wireless-802.11 (6) NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500" (6) State = 0x83ceeacb867bffc5a7029ef06b10891f (6) EAP-Message = 0x02b5008315800000007917030300747d4d14d321bdde38659686c1d52326c11419ba73f308f589360d12bca97def85ca33636ca4b0bed273e3bd2422364a964a2e8a54387c27838ab096c2302a858709bd768e115d7bdef8320bbbb07b773fa45504995a9acca7a6ffb41aaa669930778dd90af1a20c25301408f448d9c9e3fb5e729e (6) Message-Authenticator = 0x68d46baa2dd139eab8e105332ee7a9f1 (6) Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01" (6) Login-IP-Host = 0.0.0.0 (6) NAS-IP-Address = 10.0.8.4 (6) Framed-MTU = 1500 (6) Acct-Session-Id = "control0000000000050094df6a010035b" (6) WLAN-Pairwise-Cipher = 0 (6) WLAN-Group-Cipher = 0 (6) WLAN-AKM-Suite = 0 (6) WLAN-Group-Mgmt-Cipher = 0 (6) Huawei-Startup-Stamp = 1648044398 (6) Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf" (6) Huawei-Connect-ID = 4955 (6) Huawei-Version = "Huawei AC6005-8" (6) Huawei-Product-ID = "AC" (6) Huawei-Loopback-Address = "0006-F4B0-96F0" (6) Huawei-User-Mac = "\000\000\000\001" (6) Restoring &session-state (6) &session-state:Framed-MTU = 994 (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (6) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) &session-state:TLS-Session-Version = "TLS 1.2" (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: Looking up realm "ie.edu" for User-Name = "eduroam(a)ie.edu" (6) suffix: Found realm "ie.edu" (6) suffix: Adding Stripped-User-Name = "eduroam" (6) suffix: Adding Realm = "ie.edu" (6) suffix: Authentication realm is LOCAL (6) [suffix] = ok (6) eap: Peer sent EAP Response (code 2) ID 181 length 131 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x5e95050e5f971f80 (6) eap: Finished EAP session with state 0x83ceeacb867bffc5 (6) eap: Previous EAP request found for state 0x83ceeacb867bffc5, released from the list (6) eap: Peer sent packet with method EAP TTLS (21) (6) eap: Calling submodule eap_ttls to process data (6) eap_ttls: Authenticate (6) eap_ttls: (TLS) EAP Peer says that the final record size will be 121 bytes (6) eap_ttls: (TLS) EAP Got all data (121 bytes) (6) eap_ttls: Session established. Proceeding to decode tunneled attributes (6) eap_ttls: Got tunneled request (6) eap_ttls: EAP-Message = 0x020200541a0202004f31314b383ab05b5a98791533e0d60792d3000000000000000018c4016c1a93ce8d4dedf2315158c6f40d7b6f4d25c3f0de00656475726f616d2e7465737440657363692e7570662e656475 (6) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_ttls: Sending tunneled request (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x020200541a0202004f31314b383ab05b5a98791533e0d60792d3000000000000000018c4016c1a93ce8d4dedf2315158c6f40d7b6f4d25c3f0de00656475726f616d2e7465737440657363692e7570662e656475 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "eduroam(a)ie.edu" (6) State = 0x5e95050e5f971f803cc8846f84059ced (6) NAS-Port = 500 (6) Service-Type = Framed-User (6) Framed-Protocol = PPP (6) Calling-Station-Id = "163f-2583-85bf" (6) NAS-Identifier = "controller1" (6) NAS-Port-Type = Wireless-802.11 (6) NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500" (6) Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01" (6) Login-IP-Host = 0.0.0.0 (6) NAS-IP-Address = 10.0.8.4 (6) Framed-MTU = 1500 (6) Acct-Session-Id = "control0000000000050094df6a010035b" (6) WLAN-Pairwise-Cipher = 0 (6) WLAN-Group-Cipher = 0 (6) WLAN-AKM-Suite = 0 (6) WLAN-Group-Mgmt-Cipher = 0 (6) Huawei-Startup-Stamp = 1648044398 (6) Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf" (6) Huawei-Connect-ID = 4955 (6) Huawei-Version = "Huawei AC6005-8" (6) Huawei-Product-ID = "AC" (6) Huawei-Loopback-Address = "0006-F4B0-96F0" (6) Huawei-User-Mac = "\000\000\000\001" (6) Event-Timestamp = "Mar 7 2025 14:00:59 CET" (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authorize { rlm_ldap (ldap): Reserved connection (3) (6) ldap: EXPAND (mail=%{User-Name}) (6) ldap: --> (mail=eduroam(a)ie.edu) (6) ldap: Performing search in "ou=Users,dc=ie,dc=edu" with filter "(mail=eduroam(a)ie.edu)", scope "sub" (6) ldap: Waiting for search result... (6) ldap: User object found at DN "uid=etest,ou=Users,dc=ie,dc=edu" (6) ldap: Processing user attributes rlm_ldap (ldap): Released connection (3) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.ie.edu:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (6) [ldap] = ok (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = ok (6) } # policy filter_username = ok (6) suffix: Checking for suffix after "@" (6) suffix: Looking up realm "ie.edu" for User-Name = "eduroam(a)ie.edu" (6) suffix: Found realm "ie.edu" (6) suffix: Adding Stripped-User-Name = "eduroam" (6) suffix: Adding Realm = "ie.edu" (6) suffix: Authentication realm is LOCAL (6) [suffix] = ok (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 2 length 84 (6) eap: No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) files: users: Matched entry DEFAULT at line 167 (6) [files] = ok rlm_ldap (ldap): Reserved connection (4) (6) ldap: EXPAND (mail=%{User-Name}) (6) ldap: --> (mail=eduroam(a)ie.edu) (6) ldap: Performing search in "ou=Users,dc=ie,dc=edu" with filter "(mail=eduroam(a)ie.edu)", scope "sub" (6) ldap: Waiting for search result... (6) ldap: User object found at DN "uid=etest,ou=Users,dc=ie,dc=edu" (6) ldap: Processing user attributes rlm_ldap (ldap): Released connection (4) (6) [ldap] = ok (6) [expiration] = noop (6) [logintime] = noop (6) [pap] = noop (6) } # authorize = updated (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Expiring EAP session with state 0x5e95050e5f971f80 (6) eap: Finished EAP session with state 0x5e95050e5f971f80 (6) eap: Previous EAP request found for state 0x5e95050e5f971f80, released from the list (6) eap: Peer sent packet with method EAP MSCHAPv2 (26) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: Auth-Type sub-section not found. Ignoring. (6) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) eap: Sending EAP Failure (code 4) ID 2 length 4 (6) eap: Freeing handler (6) [eap] = reject (6) } # authenticate = reject (6) Failed to authenticate the user (6) Using Post-Auth-Type Reject (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) Post-Auth-Type REJECT { (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> eduroam(a)ie.edu (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) update outer.session-state { (6) No attributes updated for RHS &request:Module-Failure-Message (6) } # update outer.session-state = noop (6) } # Post-Auth-Type REJECT = updated (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x04020004 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_ttls: Got tunneled Access-Reject (6) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed (6) eap: Sending EAP Failure (code 4) ID 181 length 4 (6) eap: Failed in EAP select (6) [eap] = invalid (6) } # authenticate = invalid (6) Failed to authenticate the user (6) Using Post-Auth-Type Reject (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Post-Auth-Type REJECT { (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> eduroam(a)ie.edu (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) [eap] = noop (6) policy remove_reply_message_if_eap { (6) if (&reply:EAP-Message && &reply:Reply-Message) { (6) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (6) else { (6) [noop] = noop (6) } # else = noop (6) } # policy remove_reply_message_if_eap = noop (6) } # Post-Auth-Type REJECT = updated (6) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (6) Sending delayed response (6) Sent Access-Reject Id 97 from 10.0.0.209:1812 to 10.0.8.4:61706 length 44 (6) EAP-Message = 0x04b50004 (6) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.7 seconds. This is what can be seen trying to validate from Android device: Would be graceful if someone can help me out or guide me on the right direction as I've been working on this for over a months without much results. Thanks,

3 2