- Freeradius-Users - lists.freeradius.org

RE: Active Directory with NTLM_AUTH
by Garber, Neal 13 Oct '06

13 Oct '06

> What is added to the user file for this? Is it similar to below: Do you need those reply attributes returned? If not, you may not need anything in the users file. I don't have anything in mine, but I'm not using radius for dial-up/PPP. > Can I simply use the: --require-membership-of='DOMAIN\Group' > option of ntlm_auth to accomplish the the group check? I've used this option manually with clear-text passwords, but I haven't tried it from mschap in FR. Does it work for you when you run ntlm_auth from a shell prompt? If you can't get it to work from mschap, you can have LDAP get the user's group memberships by adding a checkItem to ldap.attrmap. In our environment, the groups to which a user is a member are stored in the memberOf LDAP attribute. So, I have the following in my ldap.attrmap file: checkItem Ldap-Group memberOf Then, ensure ldap is in your authorize section. This checkItem will cause ldap to create one Ldap-Group check attribute for each group to which the user is a member. In the past, I have successfully used checkval to do the comparison. The checkval module compares a request attribute to a check attribute. If your group name isn't in a request attribute, you can use attr_rewrite to add a request attribute with the group name you desire to test against. You would then put checkval after the attr_rewrite and ldap modules in authorize. I'm currently using perl to do authorization because of the flexibility it affords. (In my case, depending upon the Huntgroup-Name, the group membership requirement varies. Also, for some Huntgroups, I allow several groups and I return a custom reply attribute that specifies the user's privilege level based on which group they were a member.) If you use perl, you wouldn't need attr_rewrite or checkval. I haven't been using FR for very long so this may not be the best approach. However, I'm sure others will chime in if there are better alternatives.

1 0

ldap attribtes from accounting{} and acct_users/users files
by Tariq Rashid 13 Oct '06

13 Oct '06

I wonder if its possible to do ldap lookups when handling accounting (start) packets? This would likely mean adding an "ldap" entry to the accounting{} section of the radiusd.conf file. At the moment I am calling an external script from the acct-users file usingg: DEFAULT Acct-Status-Type == Start Exec-Program = "/etc/freeradius/scripts/acct_start.py %{User-Name}" but this is inefficient as i want to only start an external interpreter if an ldap attribiute is set to certain values. if the freeradius daemon, which holds open sessions to the ldap server, can re-use those connections during the accounting phase, and the acct-users file could restrict calling the external code based on those attributes ... something like: DEFAULT Acct-Status-Type == Start, Ldap_Attribute == My_Specific_Value_1 Exec-Program = "/etc/freeradius/scripts/acct_start.py %{User-Name}" DEFAULT Acct-Status-Type == Start, Ldap_Attribute == My_Specific_Value_2 Exec-Program = "/etc/freeradius/scripts/acct_start.py %{User-Name}" i've not found anyone try this. is it a bad idea to try to get the "rlm_ldap" module called from the accounting{} section? can the returned attributes be mapped or accessed such as {%ldap:Attribue_Name} or similar? I'm prepared to do some development work to get this working - i know that when i last looked at freeradius 1.0.2 accessing ldap attributes from the users files was not possible. any ideas or comments or pointers would be gratefully received tariq

1 0

RE: Active Directory with NTLM_AUTH
by Garber, Neal 13 Oct '06

13 Oct '06

> I also need to check that the user is a member of a particular group > in Active Directory before Access-Accept is sent - do I fall back to > LDAP for this? You can use LDAP in the authorize section to accomplish this. Is the group name you are checking against static? Is it sometimes/always/never the primary group for the user? > I have had LDAP only working with PAP, but am stuck with getting it to > work with MS-CHAP. You can't use LDAP with MS-CHAP. Use the mschap module to do the authentication. Look at the comments in radiusd.conf to see how to use ntlm_auth via the mschap module of FR.

4 6

RE: SQL Accounting oddness
by David Roze 13 Oct '06

13 Oct '06

Hi John, I would try to run Mysql with error and warning logging like --log-error=/var/log/mysql-errors --log-warnings And check the logs Have you also tried to copy the query sent from Radius and execute it manually? You might get your solution there David -- http://www.netexpertise.eu -----Original Message----- From: freeradius-users-bounces+droze=digiweb.ie(a)lists.freeradius.org [mailto:freeradius-users-bounces+droze=digiweb.ie@lists.freeradius.org] On Behalf Of John Williams Sent: 12 October 2006 08:26 To: 'FreeRadius users mailing list' Subject: Spam:RE: SQL Accounting oddness All the ports are open. The authentication packets and accounting packets are hitting the server ok. The authentication is being checked against the radcheck table in SQL and authenticates users. But the accounting information isn't being written to the radacct table, even though I can see freeradius sending it if I run radius in debug mode. John > -----Original Message----- > From: freeradius-users- > bounces+john.williams=eurisp.co.uk(a)lists.freeradius.org > [mailto:freeradius-users- > bounces+john.williams=eurisp.co.uk(a)lists.freeradius.org] On Behalf Of Sean > Sent: 11 October 2006 17:39 > To: freeradius-users(a)lists.freeradius.org > Subject: RE: SQL Accounting oddness > > Hi, > > Check that you have all the ports used by FreeRadius open. It looks as > if the accounting traffic is not getting through to the server. > > Let me know if I'm right. > > > Regards, > > Sean Bracken > > http://swarmhotspots.com > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.0.408 / Virus Database: 268.13.2/471 - Release Date: 10/10/2006 > -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.0.408 / Virus Database: 268.13.2/471 - Release Date: 10/10/2006 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

2 3

Proxy errors in radius log
by John Williams 13 Oct '06

13 Oct '06

I’m getting a lot of entries in my radius log on one of our radius servers like the following: Error: Reply from home server 10.0.0.1:1646 - ID: 172 arrived too late for request 5280. Try increasing 'retry_delay' or 'max_request_time' Error: Reply from home server 10.0.0.2:1646 - ID: 150 arrived too late for request 5256. Try increasing 'retry_delay' or 'max_request_time' Is this a problem on our radius server or the company we are proxying to and their radius servers? If it is our server what do I need to do to resolve this? Thanks John -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.0.408 / Virus Database: 268.13.3/473 - Release Date: 12/10/2006

1 0

TLS handshaking problem
by Giuseppina Venezia 13 Oct '06

13 Oct '06

Hi all, my configuration is FreeRadius (1.0.5) with Chillispot in proxy mode (and WPA-Enterprise-Auto), when i try to connect with a client, it accepts the certificate, but authentication failed. FreeRadius communicate with Chillispot and all seems work fine. I've seen that in the firts request, TLS give an error ( TLS_accept:error in SSLv3 read client certificate A ) but in the third request (whit the same login) it works. What's wrong? Best regards. These are radius and chilli log: rad_recv: Access-Request packet from host 192.168.181.1:1026, id=0, length=118 User-Name = "prof1" EAP-Message = 0x0200000a0170726f6631 Message-Authenticator = 0xa755e14d8f738a60ad50681a848c4d27 Calling-Station-Id = "00-17-F2-44-11-C2" Called-Station-Id = "00-50-BF-E3-E8-2A" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 NAS-IP-Address = 192.168.181.1 NAS-Identifier = "14" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "prof1", looking up realm NULL rlm_realm: Found realm "NULL" rlm_realm: Adding Stripped-User-Name = "prof1" rlm_realm: Proxying request from user prof1 to realm NULL rlm_realm: Adding Realm = "NULL" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 0 length 10 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry DEFAULT at line 154 rlm_ldap: Entering ldap_groupcmp() radius_xlat: 'ou=mydepartment,dc=mydomain,dc=it' radius_xlat: '(uid=prof1)' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to localhost:389, authentication 0 rlm_ldap: bind as cn=Manager,dc=mydomain,dc=it/password to localhost:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=mydepartment,dc=mydomain,dc=it, with filter (uid=prof1) rlm_ldap: ldap_release_conn: Release Id: 0 radius_xlat: '(|(&(objectClass=GroupOfNames)(member=cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it))(&(objectClass=GroupOfUniqueNames)(uniquemember=cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it)))' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=mydepartment,dc=mydomain,dc=it, with filter (&(cn=student)(|(&(objectClass=GroupOfNames)(member=cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it))(&(objectClass=GroupOfUniqueNames)(uniquemember=cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it)))) rlm_ldap: object not found or got ambiguous search result rlm_ldap: ldap_release_conn: Release Id: 0 rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it, with filter (objectclass=*) rlm_ldap::groupcmp: Group student not found ????or user not a member rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "files" returns ok for request 0 rlm_ldap: - authorize rlm_ldap: performing user authorization for prof1 radius_xlat: '(uid=prof1)' radius_xlat: 'ou=mydepartment,dc=mydomain,dc=it' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=mydepartment,dc=mydomain,dc=it, with filter (uid=prof1) rlm_ldap: checking if remote access for prof1 is allowed by userPassword rlm_ldap: Added password a in check items rlm_ldap: looking for check items in directory... rlm_ldap: Adding radiusGroupName as Ldap-Group, value professor & op=21 rlm_ldap: Adding radiusCallingStationId as Calling-Station-Id, value 00-05-5D-25-12-5B & op=21 rlm_ldap: Adding radiusCallingStationId as Calling-Station-Id, value 00-02-C7-8F-A0-16 & op=21 rlm_ldap: Adding radiusCallingStationId as Calling-Station-Id, value 00-0B-6B-4A-22-E8 & op=21 rlm_ldap: Adding radiusCallingStationId as Calling-Station-Id, value 00-17-F2-44-11-C2 & op=21 rlm_ldap: Adding userPassword as User-Password, value a & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusFilterId as Filter-Id, value 98 & op=11 rlm_ldap: user prof1 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 0 rlm_checkval: Item Name: Calling-Station-Id, Value: 00-17-F2-44-11-C2 rlm_checkval: Value Name: Calling-Station-Id, Value: 00-05-5D-25-12-5B rlm_checkval: Value Name: Calling-Station-Id, Value: 00-02-C7-8F-A0-16 rlm_checkval: Value Name: Calling-Station-Id, Value: 00-0B-6B-4A-22-E8 rlm_checkval: Value Name: Calling-Station-Id, Value: 00-17-F2-44-11-C2 modcall[authorize]: module "checkval" returns ok for request 0 modcall: group authorize returns updated for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: group authenticate returns handled for request 0 Sending Access-Challenge of id 0 to 192.168.181.1:1026 Filter-Id = "98" EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x43ba05fe457734cfdd7739795f3bdc8b Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.181.1:1026, id=1, length=244 User-Name = "prof1" State = 0x43ba05fe457734cfdd7739795f3bdc8b EAP-Message = 0x0201007619800000006c1603010067010000630301452e55f989de814794c772b01ccc34ce2afa98a74d0ad6bea3f928e7c288115000003c002f000500040035000aff830009ff82000300080006ff8000320033003400380039003a0016001500140013001200110018001b001a0017001900010100 Message-Authenticator = 0xc8af438cacd711e7ff0d740c3cd87384 Calling-Station-Id = "00-17-F2-44-11-C2" Called-Station-Id = "00-50-BF-E3-E8-2A" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 NAS-IP-Address = 192.168.181.1 NAS-Identifier = "14" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "prof1", looking up realm NULL rlm_realm: Found realm "NULL" rlm_realm: Adding Stripped-User-Name = "prof1" rlm_realm: Proxying request from user prof1 to realm NULL rlm_realm: Adding Realm = "NULL" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 1 length 118 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched entry DEFAULT at line 154 rlm_ldap: Entering ldap_groupcmp() radius_xlat: 'ou=mydepartment,dc=mydomain,dc=it' radius_xlat: '(uid=prof1)' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=mydepartment,dc=mydomain,dc=it, with filter (uid=prof1) rlm_ldap: ldap_release_conn: Release Id: 0 radius_xlat: '(|(&(objectClass=GroupOfNames)(member=cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it))(&(objectClass=GroupOfUniqueNames)(uniquemember=cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it)))' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=mydepartment,dc=mydomain,dc=it, with filter (&(cn=student)(|(&(objectClass=GroupOfNames)(member=cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it))(&(objectClass=GroupOfUniqueNames)(uniquemember=cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it)))) rlm_ldap: object not found or got ambiguous search result rlm_ldap: ldap_release_conn: Release Id: 0 rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it, with filter (objectclass=*) rlm_ldap::groupcmp: Group student not found ????or user not a member rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "files" returns ok for request 1 rlm_ldap: - authorize rlm_ldap: performing user authorization for prof1 radius_xlat: '(uid=prof1)' radius_xlat: 'ou=mydepartment,dc=mydomain,dc=it' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=mydepartment,dc=mydomain,dc=it, with filter (uid=prof1) rlm_ldap: checking if remote access for prof1 is allowed by userPassword rlm_ldap: Added password a in check items rlm_ldap: looking for check items in directory... rlm_ldap: Adding radiusGroupName as Ldap-Group, value professor & op=21 rlm_ldap: Adding radiusCallingStationId as Calling-Station-Id, value 00-05-5D-25-12-5B & op=21 rlm_ldap: Adding radiusCallingStationId as Calling-Station-Id, value 00-02-C7-8F-A0-16 & op=21 rlm_ldap: Adding radiusCallingStationId as Calling-Station-Id, value 00-0B-6B-4A-22-E8 & op=21 rlm_ldap: Adding radiusCallingStationId as Calling-Station-Id, value 00-17-F2-44-11-C2 & op=21 rlm_ldap: Adding userPassword as User-Password, value a & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusFilterId as Filter-Id, value 98 & op=11 rlm_ldap: user prof1 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 1 rlm_checkval: Item Name: Calling-Station-Id, Value: 00-17-F2-44-11-C2 rlm_checkval: Value Name: Calling-Station-Id, Value: 00-05-5D-25-12-5B rlm_checkval: Value Name: Calling-Station-Id, Value: 00-02-C7-8F-A0-16 rlm_checkval: Value Name: Calling-Station-Id, Value: 00-0B-6B-4A-22-E8 rlm_checkval: Value Name: Calling-Station-Id, Value: 00-17-F2-44-11-C2 modcall[authorize]: module "checkval" returns ok for request 1 modcall: group authorize returns updated for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0067], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 06ae], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept:error in SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 1 modcall: group authenticate returns handled for request 1 Sending Access-Challenge of id 1 to 192.168.181.1:1026 Filter-Id = "98" EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x011612636c69656e74406578616d706c652e636f6d30 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5039a921f9fc66f28d6e3f4b862f6345 Finished request 1 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.181.1:1026, id=2, length=132 User-Name = "prof1" State = 0x5039a921f9fc66f28d6e3f4b862f6345 EAP-Message = 0x020200061900 Message-Authenticator = 0xa91e107ec69b91ffe7cb31a455684512 Calling-Station-Id = "00-17-F2-44-11-C2" Called-Station-Id = "00-50-BF-E3-E8-2A" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 NAS-IP-Address = 192.168.181.1 NAS-Identifier = "14" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "prof1", looking up realm NULL rlm_realm: Found realm "NULL" rlm_realm: Adding Stripped-User-Name = "prof1" rlm_realm: Proxying request from user prof1 to realm NULL rlm_realm: Adding Realm = "NULL" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: EAP packet type response id 2 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 users: Matched entry DEFAULT at line 154 rlm_ldap: Entering ldap_groupcmp() radius_xlat: 'ou=mydepartment,dc=mydomain,dc=it' radius_xlat: '(uid=prof1)' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=mydepartment,dc=mydomain,dc=it, with filter (uid=prof1) rlm_ldap: ldap_release_conn: Release Id: 0 radius_xlat: '(|(&(objectClass=GroupOfNames)(member=cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it))(&(objectClass=GroupOfUniqueNames)(uniquemember=cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it)))' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=mydepartment,dc=mydomain,dc=it, with filter (&(cn=student)(|(&(objectClass=GroupOfNames)(member=cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it))(&(objectClass=GroupOfUniqueNames)(uniquemember=cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it)))) rlm_ldap: object not found or got ambiguous search result rlm_ldap: ldap_release_conn: Release Id: 0 rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it, with filter (objectclass=*) rlm_ldap::groupcmp: Group student not found ????or user not a member rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "files" returns ok for request 2 rlm_ldap: - authorize rlm_ldap: performing user authorization for prof1 radius_xlat: '(uid=prof1)' radius_xlat: 'ou=mydepartment,dc=mydomain,dc=it' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=mydepartment,dc=mydomain,dc=it, with filter (uid=prof1) rlm_ldap: checking if remote access for prof1 is allowed by userPassword rlm_ldap: Added password a in check items rlm_ldap: looking for check items in directory... rlm_ldap: Adding radiusGroupName as Ldap-Group, value professor & op=21 rlm_ldap: Adding radiusCallingStationId as Calling-Station-Id, value 00-05-5D-25-12-5B & op=21 rlm_ldap: Adding radiusCallingStationId as Calling-Station-Id, value 00-02-C7-8F-A0-16 & op=21 rlm_ldap: Adding radiusCallingStationId as Calling-Station-Id, value 00-0B-6B-4A-22-E8 & op=21 rlm_ldap: Adding radiusCallingStationId as Calling-Station-Id, value 00-17-F2-44-11-C2 & op=21 rlm_ldap: Adding userPassword as User-Password, value a & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusFilterId as Filter-Id, value 98 & op=11 rlm_ldap: user prof1 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 2 rlm_checkval: Item Name: Calling-Station-Id, Value: 00-17-F2-44-11-C2 rlm_checkval: Value Name: Calling-Station-Id, Value: 00-05-5D-25-12-5B rlm_checkval: Value Name: Calling-Station-Id, Value: 00-02-C7-8F-A0-16 rlm_checkval: Value Name: Calling-Station-Id, Value: 00-0B-6B-4A-22-E8 rlm_checkval: Value Name: Calling-Station-Id, Value: 00-17-F2-44-11-C2 modcall[authorize]: module "checkval" returns ok for request 2 modcall: group authorize returns updated for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 2 modcall: group authenticate returns handled for request 2 Sending Access-Challenge of id 2 to 192.168.181.1:1026 Filter-Id = "98" EAP-Message = 0x0103031119001e170d3036313031323134323031335a170d3038313031313134323031335a30819f310b30090603550406130243413111300f0603550408130850726f76696e63653112301006035504071309536f6d65204369747931153013060355040a130c4f7267616e697a6174696f6e31123010060355040b1309626172626163756c6f311b301906035504031312436c69656e742063657274696669636174653121301f06092a864886f70d0109011612636c69656e74406578616d706c652e636f6d30819f300d06092a864886f70d010101050003818d0030818902818100d1834676843139241f85b29b130df7eade2392a6f86ce3b912 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x5d21f4f6fd18a48d99efd1cb23d17c76ef16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x35e5753e170bf0eef07f6baa43a9ed96 Finished request 2 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.181.1:1026, id=3, length=334 User-Name = "prof1" State = 0x35e5753e170bf0eef07f6baa43a9ed96 EAP-Message = 0x020300d01980000000c616030100861000008200809bf4fb80396fa2a36688d08c0636c920f85ca7789f995dfe204a3639c4e0efc7c9213477807580d1404813daf96be6ff227836e5992d3cea4232acb679abf4a38835f0fa6a6c481509ad39a804309f9e25f5ba15b68e7c964a10272d86904d036053abbcda030d7567189e27b42b91a74671e7fb006e64cafb4a603e91d7bb6d14030100010116030100309034f26ce775a9be886de32e9101e1eeb42d5cad400ce3166058a23d047e7b4d5ad80e0e68568c2c78ce8daea1bf0b46 Message-Authenticator = 0x37a6aa57d05283ed1e2727c1cbd2e246 Calling-Station-Id = "00-17-F2-44-11-C2" Called-Station-Id = "00-50-BF-E3-E8-2A" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 NAS-IP-Address = 192.168.181.1 NAS-Identifier = "14" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 modcall[authorize]: module "chap" returns noop for request 3 modcall[authorize]: module "mschap" returns noop for request 3 rlm_realm: No '@' in User-Name = "prof1", looking up realm NULL rlm_realm: Found realm "NULL" rlm_realm: Adding Stripped-User-Name = "prof1" rlm_realm: Proxying request from user prof1 to realm NULL rlm_realm: Adding Realm = "NULL" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 3 rlm_eap: EAP packet type response id 3 length 208 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 3 users: Matched entry DEFAULT at line 154 rlm_ldap: Entering ldap_groupcmp() radius_xlat: 'ou=mydepartment,dc=mydomain,dc=it' radius_xlat: '(uid=prof1)' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=mydepartment,dc=mydomain,dc=it, with filter (uid=prof1) rlm_ldap: ldap_release_conn: Release Id: 0 radius_xlat: '(|(&(objectClass=GroupOfNames)(member=cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it))(&(objectClass=GroupOfUniqueNames)(uniquemember=cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it)))' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=mydepartment,dc=mydomain,dc=it, with filter (&(cn=student)(|(&(objectClass=GroupOfNames)(member=cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it))(&(objectClass=GroupOfUniqueNames)(uniquemember=cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it)))) rlm_ldap: object not found or got ambiguous search result rlm_ldap: ldap_release_conn: Release Id: 0 rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Maurizio Costanzo,ou=faculty,ou=dspsa,ou=mydepartment,dc=mydomain,dc=it, with filter (objectclass=*) rlm_ldap::groupcmp: Group student not found ????or user not a member rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "files" returns ok for request 3 rlm_ldap: - authorize rlm_ldap: performing user authorization for prof1 radius_xlat: '(uid=prof1)' radius_xlat: 'ou=mydepartment,dc=mydomain,dc=it' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=mydepartment,dc=mydomain,dc=it, with filter (uid=prof1) rlm_ldap: checking if remote access for prof1 is allowed by userPassword rlm_ldap: Added password a in check items rlm_ldap: looking for check items in directory... rlm_ldap: Adding radiusGroupName as Ldap-Group, value professor & op=21 rlm_ldap: Adding radiusCallingStationId as Calling-Station-Id, value 00-05-5D-25-12-5B & op=21 rlm_ldap: Adding radiusCallingStationId as Calling-Station-Id, value 00-02-C7-8F-A0-16 & op=21 rlm_ldap: Adding radiusCallingStationId as Calling-Station-Id, value 00-0B-6B-4A-22-E8 & op=21 rlm_ldap: Adding radiusCallingStationId as Calling-Station-Id, value 00-17-F2-44-11-C2 & op=21 rlm_ldap: Adding userPassword as User-Password, value a & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusFilterId as Filter-Id, value 98 & op=11 rlm_ldap: user prof1 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 3 rlm_checkval: Item Name: Calling-Station-Id, Value: 00-17-F2-44-11-C2 rlm_checkval: Value Name: Calling-Station-Id, Value: 00-05-5D-25-12-5B rlm_checkval: Value Name: Calling-Station-Id, Value: 00-02-C7-8F-A0-16 rlm_checkval: Value Name: Calling-Station-Id, Value: 00-0B-6B-4A-22-E8 rlm_checkval: Value Name: Calling-Station-Id, Value: 00-17-F2-44-11-C2 modcall[authorize]: module "checkval" returns ok for request 3 modcall: group authorize returns updated for request 3 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully SSL Connection Established eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 3 modcall: group authenticate returns handled for request 3 Sending Access-Challenge of id 3 to 192.168.181.1:1026 Filter-Id = "98" EAP-Message = 0x01040041190014030100010116030100305cbbad378481f9e36a6768f41f18a5924a34dcebde91f3b0f4ec5c8782aa697976a71ce9edb66d2cd16282a3f5fae348 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd9784d7c093eb0db5f8af482bc1e7400 Finished request 3 ===================================================== bash-3.00# chilli --fg --debug --conup=/etc/conup --condown=/etc/condow --eapolenable ChilliSpot version 1.1.0 started. chillispot[1696]: ChilliSpot 1.1.0. Copyright 2002-2005 Mondru AB. Licensed under GPL. See http://www.chillispot.org for credits. Waiting for client request... chillispot[1696]: chilli.c: 3509: New DHCP request from MAC=00-11-95-C2-93-0A New DHCP connection established DHCP requested IP address chillispot[1696]: chilli.c: 3479: Client MAC=00-11-95-C2-93-0A assigned IP 192.168.182.2 cb_dhcp_data_ind. Packet received. DHCP authstate: 5 Radius access request received! Calling Station ID is: 00-17-F2-44-11-C2 Username is: prof1 chillispot[1696]: chilli.c: 3509: New DHCP request from MAC=00-17-F2-44-11-C2 New DHCP connection established Received access request confirmation from radius server Received access challenge from radius server cb_dhcp_data_ind. Packet received. DHCP authstate: 5 Radius access request received! Calling Station ID is: 00-17-F2-44-11-C2 Username is: prof1 Received access request confirmation from radius server Received access challenge from radius server cb_dhcp_data_ind. Packet received. DHCP authstate: 5 Radius access request received! Calling Station ID is: 00-17-F2-44-11-C2 Username is: prof1 Received access request confirmation from radius server Received access reject from radius server chillispot[1696]: chilli.c: 3550: DHCP addr released by MAC=00-17-F2-44-11-C2 IP=0.0.0.0 DHCP connection removed chillispot[1696]: chilli.c: 3550: DHCP addr released by MAC=00-11-95-C2-93-0A IP=192.168.182.2 DHCP connection removed

2 1

mysql and Auth-Type:=Reject Problem
by Norbert Wegener 13 Oct '06

13 Oct '06

I am using a mysql database with user information and simulate an 802.1x authentication via eapol_test. In special situations I want to send an Auth-Type:=Reject from the table radreply, although the EAP authentication succeeded. This does not seem to work for me with freeradius 1.1.3. freeradius -AX .... modcall: leaving group authenticate (returns ok) for request 21 Sending Access-Accept of id 9 to 127.0.0.1 port 1226 Framed-IP-Address = 1.2.3.4 MS-MPPE-Recv-Key = 0xd8a5e8adaa368def127716024634cf6d7633ed034d8206e376ab21f408771f31 MS-MPPE-Send-Key = 0x7e67cb055071a333c28c7e462914bcfba12208c6a547ef8740c939f9c3be5173 EAP-Message = 0x03090004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "host/de7018tc.ww901.siemens.net" Finished request 21 Going to the next request Waking up in 6 seconds... where the ip 1.2.3.4 is definitely from that table and the select freeradius starts, gives the correct result in mysql client itself: mysql> SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = 'host/de7018tc.ww901.siemens.net' ORDER BY id; +----+---------------------------------+-------------------+---------+----+ | id | UserName | Attribute | Value | op | +----+---------------------------------+-------------------+---------+----+ | 32 | host/de7018tc.ww901.siemens.net | Auth-Type | Reject | := | | 33 | host/de7018tc.ww901.siemens.net | Framed-IP-Address | 1.2.3.4 | = | +----+---------------------------------+-------------------+---------+----+ The operator ==,+= or = do not work either. The database contains the following: mysql> select * from usergroup; +----------+---------------------------------+-----------+---------------------+---------------------+---------+ | id | UserName | GroupName | loaddate | validto | konftyp | +----------+---------------------------------+-----------+---------------------+---------------------+---------+ | 16148296 | HOST/de7018tc.ww901.siemens.net | vl1 | 2006-10-12 14:17:22 | 2006-10-13 00:00:00 | NULL | +----------+---------------------------------+-----------+---------------------+---------------------+---------+ 1 row in set (0.00 sec) The following entry is only there to get the attributes from radreply later: mysql> select * from radcheck; +----------+---------------------------------+--------------+----+-------+---------------------+ | id | UserName | Attribute | op | Value | validto | +----------+---------------------------------+--------------+----+-------+---------------------+ | 12131722 | HOST/de7018tc.ww901.siemens.net | Idle-Timeout | += | 12345 | 2006-10-13 00:00:00 | +----------+---------------------------------+--------------+----+-------+---------------------+ 1 row in set (0.00 sec) mysql> select * from radreply; +----+---------------------------------+-------------------+----+---------+------------+--------------+---------+ | id | UserName | Attribute | op | Value | ra_nasname | ra_GroupName | validto | +----+---------------------------------+-------------------+----+---------+------------+--------------+---------+ | 32 | host/de7018tc.ww901.siemens.net | Auth-Type | := | Reject | 4711 | NULL | NULL | | 33 | host/de7018tc.ww901.siemens.net | Framed-IP-Address | = | 1.2.3.4 | 0815 | NULL | NULL | +----+---------------------------------+-------------------+----+---------+------------+--------------+---------+ 2 rows in set (0.00 sec) The complete logfile can be found at http://www.wegener-net.de/fr/ What do I have to change to make that work? Thanks Norbert Wegener

2 1

TRAPs with radius
by Kshitij Korde 13 Oct '06

13 Oct '06

When I try to monitor radius server with SNMP Manager I find 1. When the radius server goes down the snmp agent generates the trap which is seen by the SNMP manager (snmp management console). 2. When the snmp agent comes up it generates a trap ( Cold start LINK UP trap ). How should I configure the snmpd.conf file so that a trap is generated by the snmp agent when the radius server comes up. Thanks Kshitij ============================================================================================================================ Tech Mahindra, formerly Mahindra-British Telecom. Disclaimer: This message and the information contained herein is proprietary and confidential and subject to the Tech Mahindra policy statement, you may review at <a href="http://www.techmahindra.com/Disclaimer.html">http://www.techmahindra.com/Disclaimer.html</a> externally and <a href="http://tim.techmahindra.com/Disclaimer.html">http://tim.techmahindra.com/Disclaimer.html</a> internally within Tech Mahindra. ============================================================================================================================

1 0

Active Directory with NTLM_AUTH
by duckeo 13 Oct '06

13 Oct '06

Okay I've been following the Wiki for Active Directory Integration but now I'm stuck. I'm successful at getting the machine to join the AD with Samba3, I have NTLM_AUTH working from the command line to challenge for the user and return successful. Next part is getting FreeRadius to use this information. The end result is that I am using a Dial Up adapter within Windows to talk to radius, so I want the default Windows settings of MSCHAP to work first (means I have to customise the client end less). What (if anything) do I need to do to the users file? I also need to check that the user is a member of a particular group in Active Directory before Access-Accept is sent - do I fall back to LDAP for this? I have had LDAP only working with PAP, but am stuck with getting it to work with MS-CHAP.

1 0

RE: Help: How to authenticate additional attribute
by Garber, Neal 13 Oct '06

13 Oct '06

> I would like to authenticate the client with its location coordinate You didn't provide much information about what a "location coordinate" is and how you would determine whether you would allow/deny access. Is this where the user is located geographically? Do you want them to enter it or should it be derived?

1 0