- Freeradius-Users - lists.freeradius.org

how to send to a switch Port Priority ?
by George Comanescu 28 Aug '06

28 Aug '06

hello I have the following users file and I wold like to send to the switch on authentification PortPriority ... a auth-Type := Local, User-Password == "a" Service-Type = Administrative-User, Reply-Message = "Salut user:A!" b Auth-Type := EAP, User-Password == "b" Service-Type = Administrative-User, Reply-Message = "Hi :B!", ???? Port-Priority = Platinum, Tunnel-Type = VLAN, Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-ID = "256", Vendor-Specific = "562" ... -- Cu respect, George Comanescu

2 1

RE: Report Generator
by Andre van der Walt 28 Aug '06

28 Aug '06

Hi Sean, Please may I get a copy of this. Thanks, Andre van der Walt > -----Original Message----- > From: > freeradius-users-bounces+andre.vdwalt=is.co.za(a)lists.freeradiu > s.org > [mailto:freeradius-users-bounces+andre.vdwalt=is.co.za@lists.f > reeradius.org] On Behalf Of Sean > Sent: 23 August 2006 09:58 PM > To: freeradius-users(a)lists.freeradius.org > Subject: Report Generator > > Hi, > > Ive written a report generator in PHP and HTML that will allow your > clients to generate usage reports from the FreeRadius log files. When > the user logs in he/she is asked for their IP address and the > Month that > they want to display. If anyone wants a copy let me know. If there is > enough interest I'll make it available for public download. > > Regards, > > Sean Bracken > > http://swarmhotspots.com > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > Please note: This email and its content are subject to the disclaimer as displayed at the following link http://www.is.co.za/disc.asp. Should you not have Web access, send a mail to disclaimers(a)is.co.za and a copy will be emailed to you.

1 0

CHAP, LDAP and MS AD
by duckeo 28 Aug '06

28 Aug '06

I just wanted to confirm what I have researched and found to be 'not feasible'. Using CHAP authentication with Microsoft Active Directory is not possible without modifying the Active Directory to store a plain-text version of the password. MS-CHAP is an option but must be supported on the client end, using ntlm_auth. I ask as I am trying to persue the path of getting the end client to use PAP, but wanted to get my facts straight first. Thanks

2 1

RE: New to FreeRADIUS and looking for answers...
by Geoff Dornan 27 Aug '06

27 Aug '06

Agreed in most aspects, but how I find it easier to learn, and by learn I mean been able to understand why it works, is by trial and error, anyone can cut and paste a few lines in a file and get it working but really how much would you have you have advanced your knowledge on a specific project (freeradius for e.g) without having to go through all the trial and errors of debugging, making a few changes, debugging some more and eventually getting it right, that is an awesome feeling when it works, and it will work, eventually. Having documentation is great place to start or go back to as a reference. But to me you can't bet a few cups of coffee and some serious time chucked in to get the desired results. I think chaps like Alan are making invaluable contributions to all out there using it, there are a lot of people on the list and I see that mainly 8-10 people only ever take the time to answer people joining and asking questions (this is not specifically a Free radius list issue), may be wrong but that it was I have seen on the replies to posts. I know I am guilty of that, we read, we archive and we watch other people reply and tell ourselves "yup that was what I would have said" Why not step up and say it next time, Geoff -----Original Message----- From: freeradius-users-bounces+geoff=cmcnetworks.net(a)lists.freeradius.org [mailto:freeradius-users-bounces+geoff=cmcnetworks.net@lists.freeradius. org] On Behalf Of Scott Holland Sent: Sunday, August 27, 2006 10:57 AM To: freeradius-users(a)lists.freeradius.org Subject: Re: New to FreeRADIUS and looking for answers... I'm not going to get into what the project lacks as this is old news. At least Alan is working on documentation to support people like us. :) Having said that, I find it amazing as to the lack of overal support for the project on the Internet. Working examples seem to be hard to come by? All of the work I do is Microsoft Server based (no suprise)! I am new to Linux in almost every sense of the word yet I'm well aware of how powerfull it can be... The downfall of Linux on the whole, and I'm not talking about any one project and or distro, is the total lack of real support. When I say real support, I mean good, solid documentation to help new users from the ground up. If you think back to the days of DOS. You could find countless books on the subject. In Australia, you will find this very hard... The solution appears to be, the Internet which I can only assume is because of the "public" nature of Linux... Finding that sweet source of help on Linux however, on the magic Internet is harder than you would think - This is proven in FreeRADIUS a project which has been around for some time... We all know its fantastic, and we all know Linux is sensational even if we newbies can't use it... What upsets me is those users who clearly have their head around it who don't help guys like us! I'm not having a go at anyone on this project, I'm talking in general so please understand... :) I am very keen to move away from Microsoft based solutions and this was going to be my first project... The perfect box to handle the AAA requirements of my wireless network, and to act as proxy to filter the web............ How bloody hard this is... Regards, Scott >From: "affora deeb" <engineerafraa(a)gmail.com> >Reply-To: FreeRadius users mailing list ><freeradius-users(a)lists.freeradius.org> >To: "FreeRadius users mailing list" <freeradius-users(a)lists.freeradius.org> >Subject: Re: New to FreeRADIUS and looking for answers... >Date: Sun, 27 Aug 2006 08:40:37 +0200 > >hi Scott >i have the same problem u talked about >i need someone to help me in configuring free radius on linux server step >by >step >so please if any one can do this favour i'll be so thankfull >afraa > > >On 8/26/06, Scott Holland <hollstar2047(a)hotmail.com> wrote: >> >>Hi Guys, >> >>I'd like to begin by saying I'm new, 100% in fact to both Linux and >>FreeRADIUS. Having said that, I am in a position where by I feel I need to >>use both to overcome certain problems I am having at work. Allow me to >>offer >>a very brief overview as I don't want to waste anyones time: >> >>We have a building with 10+ WAP. They are connected to an ADSL2 service >>which is being abused by staff. I now have a HP DL340 1U Server, ready to >>be >>set up as a FreeRADIUS box but, have no clue as to how. >> >>In short, I need to better monitor what users are doing and restrict the >>level of access they have such as what websites they can visit and so on. >>In >>part, I feel FreeRADIUS can help. >> >>Having said all this, I'm at a loss like so many people it would seem with >>the FreeRADIUS concept. It appears powerfull on the surface however I seem >>to be unable to find any good material on the subject. Most of it, is old >>and dated. >> >>Yes, the documentation is good, but I see nothing that really guides you, >>step by step, in learning this complex program.... >> >>While I'd love someone to spend the time to help, I don't expect it! What >>I >>would like, is someone to help me by pointing me in the right direction! I >>have been looking at the book RADIUS, which is currently very hard to get >>here in Australia. So hard, I'd have to get it from the US and wait around >>eight weeks as the publisher is yet to reprint a book first written back >>in >>2002... >> >>I hope you can understand where I am coming from and I look forward to any >>help people can offer. >> >>Regards, >> >>Scott >> >> >>- >>List info/subscribe/unsubscribe? See >>http://www.freeradius.org/list/users.html >> >- >List info/subscribe/unsubscribe? See >http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

4 3

New to FreeRADIUS and looking for answers...
by Scott Holland 27 Aug '06

27 Aug '06

Hi Guys, I'd like to begin by saying I'm new, 100% in fact to both Linux and FreeRADIUS. Having said that, I am in a position where by I feel I need to use both to overcome certain problems I am having at work. Allow me to offer a very brief overview as I don't want to waste anyones time: We have a building with 10+ WAP. They are connected to an ADSL2 service which is being abused by staff. I now have a HP DL340 1U Server, ready to be set up as a FreeRADIUS box but, have no clue as to how. In short, I need to better monitor what users are doing and restrict the level of access they have such as what websites they can visit and so on. In part, I feel FreeRADIUS can help. Having said all this, I'm at a loss like so many people it would seem with the FreeRADIUS concept. It appears powerfull on the surface however I seem to be unable to find any good material on the subject. Most of it, is old and dated. Yes, the documentation is good, but I see nothing that really guides you, step by step, in learning this complex program.... While I'd love someone to spend the time to help, I don't expect it! What I would like, is someone to help me by pointing me in the right direction! I have been looking at the book RADIUS, which is currently very hard to get here in Australia. So hard, I'd have to get it from the US and wait around eight weeks as the publisher is yet to reprint a book first written back in 2002... I hope you can understand where I am coming from and I look forward to any help people can offer. Regards, Scott

4 9

Need Help Mysql
by Albis Nunez 27 Aug '06

27 Aug '06

Hi, please see error below. I need help to get this issue fix, please somebody can help. thanks in advance. rlm_sql (sql): Could not link driver rlm_sql_mysql: rlm_sql_mysql.so: cannot open shared object file: No such file or directory rlm_sql (sql): Make sure it (and all its dependent libraries!) are in the search path of your system's ld. radiusd.conf[14]: sql: Module instantiation failed. radiusd.conf[1824] Unknown module "sql". radiusd.conf[1753] Failed to parse authorize section. Regards. --------------------------------- All-new Yahoo! Mail - Fire up a more powerful email and get things done faster.

1 0

a bit OT, but stumped
by Chris Knipe 26 Aug '06

26 Aug '06

Hi, Just a quick question - especially valid in regards to VPN (L2TP / PPTP). I know this will depend solely on the NAS, but considering a normal *nix pppd process, and a windows based RAS client... Is it at all possible to get PPP to assign static routes to the CLIENT during the authentication process? Let's say I have a DMZ with 10/8 and 20/8 used for addressing. A client connects to a VPN server on a.b.c.d Unless I tell the client to use the VPN as a Default Gateway, the client will not have routes to route 10/8 and 20/8 over the VPN link... What needs to be done to tell Windows this? Sure, I know I can always add these routes manually, but I'm trying to avoid it :) Just a general q... Sorry for OT Regards, Chris.

2 1

Re:Report Generator
by Sean 26 Aug '06

26 Aug '06

Hi, I'm developing a full reporting and statistics suite at the moment. I'm integrating it into phpMyPrepaid and have used Carl Peterson's menu structures and style sheets. The site usage report uses the Radius log files. I changed the logging to store one months data in a separate file for each hotspot. The individual user report gets its information from radacct. The ticket reports are not finished yet. I've added an extra field to radacct called hotspot and edited the accounting sections of sql.conf to put the Radius NAS ID into this field. When it's finished site owners will be able to generate used, unused and partly used ticket reports for their sites. You can download my work to date here http://swarmhotspots.com/phpreports.tar.gz I hope you find it useful. As usual I welcome any advice, improvements or comments. Regards Sean http://swarmhotspots.com

1 0

PEAP/MSCHAPv2 authentication problems
by sheng 25 Aug '06

25 Aug '06

Hi everyone, Currently, I want to add PEAP/MSCHAPv2 authentication for wifi access. In other words, I want to use WPA for wifi. I use Freeradius + Colubris Hotspot + windows xp laptop (with intel pro wireless wlan card which supports wpa). I've checked all the hardware and they support peap/mschapv2 I've installed freeradius. It's well prepared to receive request from supplicant. I've installed CA certificate on both radius server and supplicant (laptop). Also, server certificate is added to the radius server. There's a strange problem: each time the client send a request, the server tries to read the client certificate on the supplicant. I think it's very strange considering that no client certificate is needed for peap/mschapv2. This event is recorded in the handshake phase on the radius logfile(I've listed it in the below). It seems the handshake phase fails because the server cann't read the client certificate. Thank you very much!! The following is the detailed radius log: Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf main: prefix = "/usr/local" main: localstatedir = "/usr/local/var" main: logdir = "/usr/local/var/log/radius" main: libdir = "/usr/local/lib" main: radacctdir = "/usr/local/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/local/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid" main: user = "nobody" main: group = "nobody" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = yes mschap: require_strong = yes mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded eap eap: default_eap_type = "peap" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/usr/local/etc/raddb/certs/server_keycert.pem" tls: certificate_file = "/usr/local/etc/raddb/certs/server_keycert.pem" tls: CA_file = "/usr/local/etc/raddb/certs/cacert.pem" tls: private_key_password = "" tls: dh_file = "/usr/local/etc/raddb/certs/dh" tls: random_file = "/usr/local/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" tls: cipher_list = "(null)" tls: check_cert_issuer = "(null)" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls peap: default_eap_type = "mschapv2" peap: copy_request_to_tunnel = no peap: use_tunneled_reply = no peap: proxy_tunneled_request_as_eap = yes rlm_eap: Loaded and initialized type peap mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" preprocess: hints = "/usr/local/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded detail detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (auth_log) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/usr/local/etc/raddb/users" files: acctusersfile = "/usr/local/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/usr/local/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded radutmp radutmp: filename = "/usr/local/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 172.24.26.144:1025, id=235, length=163 Acct-Session-Id = "67671438" NAS-Port = 1 NAS-Port-Type = Wireless-802.11 User-Name = "alcatel" Calling-Station-Id = "00-0E-35-89-71-E0" Called-Station-Id = "00-03-52-01-84-7D" EAP-Message = 0x027f000c01616c636174656c NAS-Identifier = "R014-00755" NAS-IP-Address = 172.24.26.144 Framed-MTU = 1496 Connect-Info = "IEEE802.1X" Service-Type = Framed-User Message-Authenticator = 0xe5f1c02c7a5d23da87698753505d4311 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 radius_xlat: '/usr/local/var/log/radius/radacct/172.24.26.144/auth-detail-20060821' rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/172.24.26.144/auth-detail-20060821 modcall[authorize]: module "auth_log" returns ok for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "alcatel", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 127 length 12 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 235 to 172.24.26.144 port 1025 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User EAP-Message = 0x018000061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xade7e869a70dc7807f62fffed71255d4 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 235 with timestamp 44e9e41a Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 172.24.26.144:1025, id=130, length=163 Acct-Session-Id = "67671438" NAS-Port = 1 NAS-Port-Type = Wireless-802.11 User-Name = "alcatel" Calling-Station-Id = "00-0E-35-89-71-E0" Called-Station-Id = "00-03-52-01-84-7D" EAP-Message = 0x027f000c01616c636174656c NAS-Identifier = "R014-00755" NAS-IP-Address = 172.24.26.144 Framed-MTU = 1496 Connect-Info = "IEEE802.1X" Service-Type = Framed-User Message-Authenticator = 0x172cd0b4188a04e9def6ea3052be89be Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 radius_xlat: '/usr/local/var/log/radius/radacct/172.24.26.144/auth-detail-20060821' rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/172.24.26.144/auth-detail-20060821 modcall[authorize]: module "auth_log" returns ok for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "alcatel", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 127 length 12 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 modcall[authorize]: module "files" returns ok for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 1 modcall: leaving group authenticate (returns handled) for request 1 Sending Access-Challenge of id 130 to 172.24.26.144 port 1025 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User EAP-Message = 0x018000061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2c5d8e633238e5cae4a7cf660b11f1ca Finished request 1 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 1 ID 130 with timestamp 44e9e425 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 172.24.26.144:1025, id=19, length=163 Acct-Session-Id = "67671438" NAS-Port = 1 NAS-Port-Type = Wireless-802.11 User-Name = "alcatel" Calling-Station-Id = "00-0E-35-89-71-E0" Called-Station-Id = "00-03-52-01-84-7D" EAP-Message = 0x027f000c01616c636174656c NAS-Identifier = "R014-00755" NAS-IP-Address = 172.24.26.144 Framed-MTU = 1496 Connect-Info = "IEEE802.1X" Service-Type = Framed-User Message-Authenticator = 0xc87bb565b77ac380bcf03e1fff1d6d81 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 radius_xlat: '/usr/local/var/log/radius/radacct/172.24.26.144/auth-detail-20060821' rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/172.24.26.144/auth-detail-20060821 modcall[authorize]: module "auth_log" returns ok for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "alcatel", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: EAP packet type response id 127 length 12 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 modcall[authorize]: module "files" returns ok for request 2 modcall: leaving group authorize (returns updated) for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 2 modcall: leaving group authenticate (returns handled) for request 2 Sending Access-Challenge of id 19 to 172.24.26.144 port 1025 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User EAP-Message = 0x018000061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x091ad12235d4b0c91ca834c803d04ee0 Finished request 2 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 172.24.26.144:1025, id=138, length=249 Acct-Session-Id = "67671438" NAS-Port = 1 NAS-Port-Type = Wireless-802.11 User-Name = "alcatel" Calling-Station-Id = "00-0E-35-89-71-E0" Called-Station-Id = "00-03-52-01-84-7D" EAP-Message = 0x0280005019800000004616030100410100003d030144e9e54ee8bf5c390cecf9fa8b659b32ac0a7eb623919876fa26dd9dc220d75800001600040005000a000900640062000300060013001200630100 State = 0x091ad12235d4b0c91ca834c803d04ee0 NAS-Identifier = "R014-00755" NAS-IP-Address = 172.24.26.144 Framed-MTU = 1496 Connect-Info = "IEEE802.1X" Service-Type = Framed-User Message-Authenticator = 0x5fc30dfab4650bc4457ca951d6079267 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 radius_xlat: '/usr/local/var/log/radius/radacct/172.24.26.144/auth-detail-20060821' rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/172.24.26.144/auth-detail-20060821 modcall[authorize]: module "auth_log" returns ok for request 3 modcall[authorize]: module "mschap" returns noop for request 3 rlm_realm: No '@' in User-Name = "alcatel", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 3 rlm_eap: EAP packet type response id 128 length 80 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 3 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 modcall[authorize]: module "files" returns ok for request 3 modcall: leaving group authorize (returns updated) for request 3 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0243], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept:error in SSLv3 read client certificate A rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0) In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 3 modcall: leaving group authenticate (returns handled) for request 3 Sending Access-Challenge of id 138 to 172.24.26.144 port 1025 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x1d25040c300a06082b06010505070301300d06092a864886f70d0101040500038181001a8366350e04eb86535cbf2b3c4a13c32f5c4455310aad4e23480d695cab9ea9dbdeed10885c1c483beb583e19adaf4e663bc41fe81c3a00a83dbcb86dbae0dd25653c2f2eea11f510cbc359e83589e6236a8456ae91bb0631c30c87172933e625ff3e2571d8781b5a3351179d0ebcd2955b235513684fcdcd288386eb612a8316030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc225f88e9ec8bd211052dcde981691af Finished request 3 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 2 ID 19 with timestamp 44e9e42f Cleaning up request 3 ID 138 with timestamp 44e9e42f Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 172.24.26.144:1025, id=137, length=249 Acct-Session-Id = "67671438" NAS-Port = 1 NAS-Port-Type = Wireless-802.11 User-Name = "alcatel" Calling-Station-Id = "00-0E-35-89-71-E0" Called-Station-Id = "00-03-52-01-84-7D" EAP-Message = 0x0280005019800000004616030100410100003d030144e9e54ee8bf5c390cecf9fa8b659b32ac0a7eb623919876fa26dd9dc220d75800001600040005000a000900640062000300060013001200630100 State = 0x091ad12235d4b0c91ca834c803d04ee0 NAS-Identifier = "R014-00755" NAS-IP-Address = 172.24.26.144 Framed-MTU = 1496 Connect-Info = "IEEE802.1X" Service-Type = Framed-User Message-Authenticator = 0x1fce69eae2a6a28432b4b723cc33db33 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "preprocess" returns ok for request 4 radius_xlat: '/usr/local/var/log/radius/radacct/172.24.26.144/auth-detail-20060821' rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/172.24.26.144/auth-detail-20060821 modcall[authorize]: module "auth_log" returns ok for request 4 modcall[authorize]: module "mschap" returns noop for request 4 rlm_realm: No '@' in User-Name = "alcatel", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 4 rlm_eap: EAP packet type response id 128 length 80 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 4 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 modcall[authorize]: module "files" returns ok for request 4 modcall: leaving group authorize (returns updated) for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: Request not found in the list rlm_eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request rlm_eap: Failed in handler modcall[authenticate]: module "eap" returns invalid for request 4 modcall: leaving group authenticate (returns invalid) for request 4 auth: Failed to validate the user. Delaying request 4 for 1 seconds Finished request 4 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 137 to 172.24.26.144 port 1025 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 4 ID 137 with timestamp 44e9e439 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 172.24.26.144:1025, id=232, length=249 Acct-Session-Id = "68cacd88" NAS-Port = 1 NAS-Port-Type = Wireless-802.11 User-Name = "alcatel" Calling-Station-Id = "00-0E-35-89-71-E0" Called-Station-Id = "00-03-52-01-84-7D" EAP-Message = 0x0280005019800000004616030100410100003d030144e9e54ee8bf5c390cecf9fa8b659b32ac0a7eb623919876fa26dd9dc220d75800001600040005000a000900640062000300060013001200630100 State = 0x091ad12235d4b0c91ca834c803d04ee0 NAS-Identifier = "R014-00755" NAS-IP-Address = 172.24.26.144 Framed-MTU = 1496 Connect-Info = "IEEE802.1X" Service-Type = Framed-User Message-Authenticator = 0xf5067019655051edd6e8fe1ab2027d1b Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 radius_xlat: '/usr/local/var/log/radius/radacct/172.24.26.144/auth-detail-20060821' rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/172.24.26.144/auth-detail-20060821 modcall[authorize]: module "auth_log" returns ok for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_realm: No '@' in User-Name = "alcatel", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 5 rlm_eap: EAP packet type response id 128 length 80 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 modcall[authorize]: module "files" returns ok for request 5 modcall: leaving group authorize (returns updated) for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: Request not found in the list rlm_eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request rlm_eap: Failed in handler modcall[authenticate]: module "eap" returns invalid for request 5 modcall: leaving group authenticate (returns invalid) for request 5 auth: Failed to validate the user. Delaying request 5 for 1 seconds Finished request 5 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 232 to 172.24.26.144 port 1025 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 5 ID 232 with timestamp 44e9e443 Nothing to do. Sleeping until we see a request. Now, it's the config file of radius.conf ## ## radiusd.conf -- FreeRADIUS server configuration file. ## ## http://www.freeradius.org/ ## $Id: radiusd.conf.in,v 1.188.2.4.2.11 2006/04/20 18:40:29 aland Exp $ ## # The location of other config files and # logfiles are declared in this file # # Also general configuration for modules can be done # in this file, it is exported through the API to # modules that ask for it. # # The configuration variables defined here are of the form ${foo} # They are local to this file, and do not change from request to # request. # # The per-request variables are of the form %{Attribute-Name}, and # are taken from the values of the attribute in the incoming # request. See 'doc/variables.txt' for more information. prefix = /usr/local exec_prefix = ${prefix} sysconfdir = ${prefix}/etc localstatedir = ${prefix}/var sbindir = ${exec_prefix}/sbin logdir = ${localstatedir}/log/radius raddbdir = ${sysconfdir}/raddb radacctdir = ${logdir}/radacct # Location of config and logfiles. confdir = ${raddbdir} run_dir = ${localstatedir}/run/radiusd # # The logging messages for the server are appended to the # tail of this file. # log_file = ${logdir}/radius.log # # libdir: Where to find the rlm_* modules. # # This should be automatically set at configuration time. # # If the server builds and installs, but fails at execution time # with an 'undefined symbol' error, then you can use the libdir # directive to work around the problem. # # The cause is usually that a library has been installed on your # system in a place where the dynamic linker CANNOT find it. When # executing as root (or another user), your personal environment MAY # be set up to allow the dynamic linker to find the library. When # executing as a daemon, FreeRADIUS MAY NOT have the same # personalized configuration. # # To work around the problem, find out which library contains that symbol, # and add the directory containing that library to the end of 'libdir', # with a colon separating the directory names. NO spaces are allowed. # # e.g. libdir = /usr/local/lib:/opt/package/lib # # You can also try setting the LD_LIBRARY_PATH environment variable # in a script which starts the server. # # If that does not work, then you can re-configure and re-build the # server to NOT use shared libraries, via: # # ./configure --disable-shared # make # make install # libdir = ${exec_prefix}/lib # pidfile: Where to place the PID of the RADIUS server. # # The server may be signalled while it's running by using this # file. # # This file is written when ONLY running in daemon mode. # # e.g.: kill -HUP `cat /var/run/radiusd/radiusd.pid` # pidfile = ${run_dir}/radiusd.pid # user/group: The name (or #number) of the user/group to run radiusd as. # # If these are commented out, the server will run as the user/group # that started it. In order to change to a different user/group, you # MUST be root ( or have root privleges ) to start the server. # # We STRONGLY recommend that you run the server with as few permissions # as possible. That is, if you're not using shadow passwords, the # user and group items below should be set to 'nobody'. # # On SCO (ODT 3) use "user = nouser" and "group = nogroup". # # NOTE that some kernels refuse to setgid(group) when the value of # (unsigned)group is above 60000; don't use group nobody on these systems! # # On systems with shadow passwords, you might have to set 'group = shadow' # for the server to be able to read the shadow password file. If you can # authenticate users while in debug mode, but not in daemon mode, it may be # that the debugging mode server is running as a user that can read the # shadow info, and the user listed below can not. # user = nobody group = nobody # max_request_time: The maximum time (in seconds) to handle a request. # # Requests which take more time than this to process may be killed, and # a REJECT message is returned. # # WARNING: If you notice that requests take a long time to be handled, # then this MAY INDICATE a bug in the server, in one of the modules # used to handle a request, OR in your local configuration. # # This problem is most often seen when using an SQL database. If it takes # more than a second or two to receive an answer from the SQL database, # then it probably means that you haven't indexed the database. See your # SQL server documentation for more information. # # Useful range of values: 5 to 120 # max_request_time = 30 # delete_blocked_requests: If the request takes MORE THAN 'max_request_time' # to be handled, then maybe the server should delete it. # # If you're running in threaded, or thread pool mode, this setting # should probably be 'no'. Setting it to 'yes' when using a threaded # server MAY cause the server to crash! # delete_blocked_requests = no # cleanup_delay: The time to wait (in seconds) before cleaning up # a reply which was sent to the NAS. # # The RADIUS request is normally cached internally for a short period # of time, after the reply is sent to the NAS. The reply packet may be # lost in the network, and the NAS will not see it. The NAS will then # re-send the request, and the server will respond quickly with the # cached reply. # # If this value is set too low, then duplicate requests from the NAS # MAY NOT be detected, and will instead be handled as seperate requests. # # If this value is set too high, then the server will cache too many # requests, and some new requests may get blocked. (See 'max_requests'.) # # Useful range of values: 2 to 10 # cleanup_delay = 5 # max_requests: The maximum number of requests which the server keeps # track of. This should be 256 multiplied by the number of clients. # e.g. With 4 clients, this number should be 1024. # # If this number is too low, then when the server becomes busy, # it will not respond to any new requests, until the 'cleanup_delay' # time has passed, and it has removed the old requests. # # If this number is set too high, then the server will use a bit more # memory for no real benefit. # # If you aren't sure what it should be set to, it's better to set it # too high than too low. Setting it to 1000 per client is probably # the highest it should be. # # Useful range of values: 256 to infinity # max_requests = 1024 # bind_address: Make the server listen on a particular IP address, and # send replies out from that address. This directive is most useful # for machines with multiple IP addresses on one interface. # # It can either contain "*", or an IP address, or a fully qualified # Internet domain name. The default is "*" # # As of 1.0, you can also use the "listen" directive. See below for # more information. # bind_address = * # port: Allows you to bind FreeRADIUS to a specific port. # # The default port that most NAS boxes use is 1645, which is historical. # RFC 2138 defines 1812 to be the new port. Many new servers and # NAS boxes use 1812, which can create interoperability problems. # # The port is defined here to be 0 so that the server will pick up # the machine's local configuration for the radius port, as defined # in /etc/services. # # If you want to use the default RADIUS port as defined on your server, # (usually through 'grep radius /etc/services') set this to 0 (zero). # # A port given on the command-line via '-p' over-rides this one. # # As of 1.0, you can also use the "listen" directive. See below for # more information. # port = 0 # # By default, the server uses "bind_address" to listen to all IP's # on a machine, or just one IP. The "port" configuration is used # to select the authentication port used when listening on those # addresses. # # If you want the server to listen on additional addresses, you can # use the "listen" section. A sample section (commented out) is included # below. This "listen" section duplicates the functionality of the # "bind_address" and "port" configuration entries, but it only listens # for authentication packets. # # If you comment out the "bind_address" and "port" configuration entries, # then it becomes possible to make the server accept only accounting, # or authentication packets. Previously, it always listened for both # types of packets, and it was impossible to make it listen for only # one type of packet. # #listen { # IP address on which to listen. # Allowed values are: # dotted quad (1.2.3.4) # hostname (radius.example.com) # wildcard (*) # ipaddr = * # Port on which to listen. # Allowed values are: # integer port number (1812) # 0 means "use /etc/services for the proper port" # port = 0 # Type of packets to listen for. # Allowed values are: # auth listen for authentication packets # acct listen for accounting packets # # type = auth #} # hostname_lookups: Log the names of clients or just their IP addresses # e.g., www.freeradius.org (on) or 206.47.27.232 (off). # # The default is 'off' because it would be overall better for the net # if people had to knowingly turn this feature on, since enabling it # means that each client request will result in AT LEAST one lookup # request to the nameserver. Enabling hostname_lookups will also # mean that your server may stop randomly for 30 seconds from time # to time, if the DNS requests take too long. # # Turning hostname lookups off also means that the server won't block # for 30 seconds, if it sees an IP address which has no name associated # with it. # # allowed values: {no, yes} # hostname_lookups = no # Core dumps are a bad thing. This should only be set to 'yes' # if you're debugging a problem with the server. # # allowed values: {no, yes} # allow_core_dumps = no # Regular expressions # # These items are set at configure time. If they're set to "yes", # then setting them to "no" turns off regular expression support. # # If they're set to "no" at configure time, then setting them to "yes" # WILL NOT WORK. It will give you an error. # regular_expressions = yes extended_expressions = yes # Log the full User-Name attribute, as it was found in the request. # # allowed values: {no, yes} # log_stripped_names = no # Log authentication requests to the log file. # # allowed values: {no, yes} # log_auth = no # Log passwords with the authentication requests. # log_auth_badpass - logs password if it's rejected # log_auth_goodpass - logs password if it's correct # # allowed values: {no, yes} # log_auth_badpass = no log_auth_goodpass = no # usercollide: Turn "username collision" code on and off. See the # "doc/duplicate-users" file # # WARNING # !!!!!!! Setting this to "yes" may result in the server behaving # !!!!!!! strangely. The "username collision" code will ONLY work # !!!!!!! with clear-text passwords. Even then, it may not do what # !!!!!!! you want, or what you expect. # !!!!!!! # !!!!!!! We STRONGLY RECOMMEND that you do not use this feature, # !!!!!!! and that you find another way of acheiving the same goal. # !!!!!!! # !!!!!!! e,g. module fail-over. See 'doc/configurable_failover' # WARNING # usercollide = no # lower_user / lower_pass: # Lower case the username/password "before" or "after" # attempting to authenticate. # # If "before", the server will first modify the request and then try # to auth the user. If "after", the server will first auth using the # values provided by the user. If that fails it will reprocess the # request after modifying it as you specify below. # # This is as close as we can get to case insensitivity. It is the # admin's job to ensure that the username on the auth db side is # *also* lowercase to make this work # # Default is 'no' (don't lowercase values) # Valid values = "before" / "after" / "no" # lower_user = no lower_pass = no # nospace_user / nospace_pass: # # Some users like to enter spaces in their username or password # incorrectly. To save yourself the tech support call, you can # eliminate those spaces here: # # Default is 'no' (don't remove spaces) # Valid values = "before" / "after" / "no" (explanation above) # nospace_user = no nospace_pass = no # The program to execute to do concurrency checks. checkrad = ${sbindir}/checkrad # SECURITY CONFIGURATION # # There may be multiple methods of attacking on the server. This # section holds the configuration items which minimize the impact # of those attacks # security { # # max_attributes: The maximum number of attributes # permitted in a RADIUS packet. Packets which have MORE # than this number of attributes in them will be dropped. # # If this number is set too low, then no RADIUS packets # will be accepted. # # If this number is set too high, then an attacker may be # able to send a small number of packets which will cause # the server to use all available memory on the machine. # # Setting this number to 0 means "allow any number of attributes" max_attributes = 200 # # reject_delay: When sending an Access-Reject, it can be # delayed for a few seconds. This may help slow down a DoS # attack. It also helps to slow down people trying to brute-force # crack a users password. # # Setting this number to 0 means "send rejects immediately" # # If this number is set higher than 'cleanup_delay', then the # rejects will be sent at 'cleanup_delay' time, when the request # is deleted from the internal cache of requests. # # Useful ranges: 1 to 5 reject_delay = 1 # # status_server: Whether or not the server will respond # to Status-Server requests. # # Normally this should be set to "no", because they're useless. # See: http://www.freeradius.org/rfc/rfc2865.html#Keep-Alives # # However, certain NAS boxes may require them. # # When sent a Status-Server message, the server responds with # an Access-Accept packet, containing a Reply-Message attribute, # which is a string describing how long the server has been # running. # status_server = no } # PROXY CONFIGURATION # # proxy_requests: Turns proxying of RADIUS requests on or off. # # The server has proxying turned on by default. If your system is NOT # set up to proxy requests to another server, then you can turn proxying # off here. This will save a small amount of resources on the server. # # If you have proxying turned off, and your configuration files say # to proxy a request, then an error message will be logged. # # To disable proxying, change the "yes" to "no", and comment the # $INCLUDE line. # # allowed values: {no, yes} # proxy_requests = yes $INCLUDE ${confdir}/proxy.conf # CLIENTS CONFIGURATION # # Client configuration is defined in "clients.conf". # # The 'clients.conf' file contains all of the information from the old # 'clients' and 'naslist' configuration files. We recommend that you # do NOT use 'client's or 'naslist', although they are still # supported. # # Anything listed in 'clients.conf' will take precedence over the # information from the old-style configuration files. # $INCLUDE ${confdir}/clients.conf # SNMP CONFIGURATION # # Snmp configuration is only valid if SNMP support was enabled # at compile time. # # To enable SNMP querying of the server, set the value of the # 'snmp' attribute to 'yes' # snmp = no $INCLUDE ${confdir}/snmp.conf # THREAD POOL CONFIGURATION # # The thread pool is a long-lived group of threads which # take turns (round-robin) handling any incoming requests. # # You probably want to have a few spare threads around, # so that high-load situations can be handled immediately. If you # don't have any spare threads, then the request handling will # be delayed while a new thread is created, and added to the pool. # # You probably don't want too many spare threads around, # otherwise they'll be sitting there taking up resources, and # not doing anything productive. # # The numbers given below should be adequate for most situations. # thread pool { # Number of servers to start initially --- should be a reasonable # ballpark figure. start_servers = 5 # Limit on the total number of servers running. # # If this limit is ever reached, clients will be LOCKED OUT, so it # should NOT BE SET TOO LOW. It is intended mainly as a brake to # keep a runaway server from taking the system with it as it spirals # down... # # You may find that the server is regularly reaching the # 'max_servers' number of threads, and that increasing # 'max_servers' doesn't seem to make much difference. # # If this is the case, then the problem is MOST LIKELY that # your back-end databases are taking too long to respond, and # are preventing the server from responding in a timely manner. # # The solution is NOT do keep increasing the 'max_servers' # value, but instead to fix the underlying cause of the # problem: slow database, or 'hostname_lookups=yes'. # # For more information, see 'max_request_time', above. # max_servers = 32 # Server-pool size regulation. Rather than making you guess # how many servers you need, FreeRADIUS dynamically adapts to # the load it sees, that is, it tries to maintain enough # servers to handle the current load, plus a few spare # servers to handle transient load spikes. # # It does this by periodically checking how many servers are # waiting for a request. If there are fewer than # min_spare_servers, it creates a new spare. If there are # more than max_spare_servers, some of the spares die off. # The default values are probably OK for most sites. # min_spare_servers = 3 max_spare_servers = 10 # There may be memory leaks or resource allocation problems with # the server. If so, set this value to 300 or so, so that the # resources will be cleaned up periodically. # # This should only be necessary if there are serious bugs in the # server which have not yet been fixed. # # '0' is a special value meaning 'infinity', or 'the servers never # exit' max_requests_per_server = 0 } # MODULE CONFIGURATION # # The names and configuration of each module is located in this section. # # After the modules are defined here, they may be referred to by name, # in other sections of this configuration file. # modules { # # Each module has a configuration as follows: # # name [ instance ] { # config_item = value # ... # } # # The 'name' is used to load the 'rlm_name' library # which implements the functionality of the module. # # The 'instance' is optional. To have two different instances # of a module, it first must be referred to by 'name'. # The different copies of the module are then created by # inventing two 'instance' names, e.g. 'instance1' and 'instance2' # # The instance names can then be used in later configuration # INSTEAD of the original 'name'. See the 'radutmp' configuration # below for an example. # # PAP module to authenticate users based on their stored password # # Supports multiple encryption schemes # clear: Clear text # crypt: Unix crypt # md5: MD5 ecnryption # sha1: SHA1 encryption. # DEFAULT: crypt pap { encryption_scheme = crypt } # CHAP module # # To authenticate requests containing a CHAP-Password attribute. # chap { authtype = CHAP } # Pluggable Authentication Modules # # For Linux, see: # http://www.kernel.org/pub/linux/libs/pam/index.html # # WARNING: On many systems, the system PAM libraries have # memory leaks! We STRONGLY SUGGEST that you do not # use PAM for authentication, due to those memory leaks. # pam { # # The name to use for PAM authentication. # PAM looks in /etc/pam.d/${pam_auth_name} # for it's configuration. See 'redhat/radiusd-pam' # for a sample PAM configuration file. # # Note that any Pam-Auth attribute set in the 'authorize' # section will over-ride this one. # pam_auth = radiusd } # Unix /etc/passwd style authentication # unix { # # Cache /etc/passwd, /etc/shadow, and /etc/group # # The default is to NOT cache them. # # For FreeBSD and NetBSD, you do NOT want to enable # the cache, as it's password lookups are done via a # database, so set this value to 'no'. # # Some systems (e.g. RedHat Linux with pam_pwbd) can # take *seconds* to check a password, when th passwd # file containing 1000's of entries. For those systems, # you should set the cache value to 'yes', and set # the locations of the 'passwd', 'shadow', and 'group' # files, below. # # allowed values: {no, yes} cache = no # Reload the cache every 600 seconds (10mins). 0 to disable. cache_reload = 600 # # Define the locations of the normal passwd, shadow, and # group files. # # 'shadow' is commented out by default, because not all # systems have shadow passwords. # # To force the module to use the system password functions, # instead of reading the files, leave the following entries # commented out. # # This is required for some systems, like FreeBSD, # and Mac OSX. # # passwd = /etc/passwd # shadow = /etc/shadow # group = /etc/group # # The location of the "wtmp" file. # This should be moved to it's own module soon. # # The only use for 'radlast'. If you don't use # 'radlast', then you can comment out this item. # radwtmp = ${logdir}/radwtmp } # Extensible Authentication Protocol # # For all EAP related authentications. # Now in another file, because it is very large. # $INCLUDE ${confdir}/eap.conf # Microsoft CHAP authentication # # This module supports MS-CHAP and MS-CHAPv2 authentication. # It also enforces the SMB-Account-Ctrl attribute. # mschap { # # As of 0.9, the mschap module does NOT support # reading from /etc/smbpasswd. # # If you are using /etc/smbpasswd, see the 'passwd' # module for an example of how to use /etc/smbpasswd # authtype = MS-CHAP # if use_mppe is not set to no mschap will # add MS-CHAP-MPPE-Keys for MS-CHAPv1 and # MS-MPPE-Recv-Key/MS-MPPE-Send-Key for MS-CHAPv2 # use_mppe = yes # if mppe is enabled require_encryption makes # encryption moderate # require_encryption = yes # require_strong always requires 128 bit key # encryption # require_strong = yes # Windows sends us a username in the form of # DOMAIN\user, but sends the challenge response # based on only the user portion. This hack # corrects for that incorrect behavior. # #with_ntdomain_hack = no # The module can perform authentication itself, OR # use a Windows Domain Controller. This configuration # directive tells the module to call the ntlm_auth # program, which will do the authentication, and return # the NT-Key. Note that you MUST have "winbindd" and # "nmbd" running on the local machine for ntlm_auth # to work. See the ntlm_auth program documentation # for details. # # Be VERY careful when editing the following line! # #ntlm_auth = "/path/to/ntlm_auth --request-nt-key --username=%{Stripped-User-Name:-%{User-Name:-None}} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" } # Lightweight Directory Access Protocol (LDAP) # # This module definition allows you to use LDAP for # authorization and authentication. # # See doc/rlm_ldap for description of configuration options # and sample authorize{} and authenticate{} blocks # # However, LDAP can be used for authentication ONLY when the # Access-Request packet contains a clear-text User-Password # attribute. LDAP authentication will NOT work for any other # authentication method. # # This means that LDAP servers don't understand EAP. If you # force "Auth-Type = LDAP", and then send the server a # request containing EAP authentication, then authentication # WILL NOT WORK. # # The solution is to use the default configuration, which does # work. # # Setting "Auth-Type = LDAP" is ALMOST ALWAYS WRONG. We # really can't emphasize this enough. # ldap { server = "ldap.your.domain" # identity = "cn=admin,o=My Org,c=UA" # password = mypass basedn = "o=My Org,c=UA" filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" # base_filter = "(objectclass=radiusprofile)" # set this to 'yes' to use TLS encrypted connections # to the LDAP database by using the StartTLS extended # operation. # The StartTLS operation is supposed to be used with normal # ldap connections instead of using ldaps (port 689) connections start_tls = no # tls_cacertfile = /path/to/cacert.pem # tls_cacertdir = /path/to/ca/dir/ # tls_certfile = /path/to/radius.crt # tls_keyfile = /path/to/radius.key # tls_randfile = /path/to/rnd # tls_require_cert = "demand" # default_profile = "cn=radprofile,ou=dialup,o=My Org,c=UA" # profile_attribute = "radiusProfileDn" access_attr = "dialupAccess" # Mapping of RADIUS dictionary attributes to LDAP # directory attributes. dictionary_mapping = ${raddbdir}/ldap.attrmap ldap_connections_number = 5 # # NOTICE: The password_header directive is NOT case insensitive # # password_header = "{clear}" # # Set: # password_attribute = nspmPassword # # to get the user's password from a Novell eDirectory # backend. This will work *only if* freeRADIUS is # configured to build with --with-edir option. # # # The server can usually figure this out on its own, and pull # the correct User-Password or NT-Password from the database. # # Note that NT-Passwords MUST be stored as a 32-digit hex # string, and MUST start off with "0x", such as: # # 0x000102030405060708090a0b0c0d0e0f # # Without the leading "0x", NT-Passwords will not work. # This goes for NT-Passwords stored in SQL, too. # # password_attribute = userPassword # # Un-comment the following to disable Novell eDirectory account # policy check and intruder detection. This will work *only if* # FreeRADIUS is configured to build with --with-edir option. # # edir_account_policy_check=no # # groupname_attribute = cn # groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" # groupmembership_attribute = radiusGroupName timeout = 4 timelimit = 3 net_timeout = 1 # compare_check_items = yes # do_xlat = yes # access_attr_used_for_allow = yes # # By default, if the packet contains a User-Password, # and no other module is configured to handle the # authentication, the LDAP module sets itself to do # LDAP bind for authentication. # # You can disable this behavior by setting the following # configuration entry to "no". # # allowed values: {no, yes} # set_auth_type = yes } # passwd module allows to do authorization via any passwd-like # file and to extract any attributes from these modules # # parameters are: # filename - path to filename # format - format for filename record. This parameters # correlates record in the passwd file and RADIUS # attributes. # # Field marked as '*' is key field. That is, the parameter # with this name from the request is used to search for # the record from passwd file # Attribute marked as '=' is added to reply_itmes instead # of default configure_itmes # Attribute marked as '~' is added to request_items # # Field marked as ',' may contain a comma separated list # of attributes. # authtype - if record found this Auth-Type is used to authenticate # user # hashsize - hashtable size. If 0 or not specified records are not # stored in memory and file is red on every request. # allowmultiplekeys - if few records for every key are allowed # ignorenislike - ignore NIS-related records # delimiter - symbol to use as a field separator in passwd file, # for format ':' symbol is always used. '\0', '\n' are # not allowed # # An example configuration for using /etc/smbpasswd. # #passwd etc_smbpasswd { # filename = /etc/smbpasswd # format = "*User-Name::LM-Password:NT-Password:SMB-Account-CTRL-TEXT::" # authtype = MS-CHAP # hashsize = 100 # ignorenislike = no # allowmultiplekeys = no #} # Similar configuration, for the /etc/group file. Adds a Group-Name # attribute for every group that the user is member of. # #passwd etc_group { # filename = /etc/group # format = "=Group-Name:::*,User-Name" # hashsize = 50 # ignorenislike = yes # allowmultiplekeys = yes # delimiter = ":" #} # Realm module, for proxying. # # You can have multiple instances of the realm module to # support multiple realm syntaxs at the same time. The # search order is defined by the order in the authorize and # preacct sections. # # Four config options: # format - must be 'prefix' or 'suffix' # delimiter - must be a single character # ignore_default - set to 'yes' or 'no' # ignore_null - set to 'yes' or 'no' # # ignore_default and ignore_null can be set to 'yes' to prevent # the module from matching against DEFAULT or NULL realms. This # may be useful if you have have multiple instances of the # realm module. # # They both default to 'no'. # # 'realm/username' # # Using this entry, IPASS users have their realm set to "IPASS". realm IPASS { format = prefix delimiter = "/" ignore_default = no ignore_null = no } # 'username@realm' # realm suffix { format = suffix delimiter = "@" ignore_default = no ignore_null = no } # 'username%realm' # realm realmpercent { format = suffix delimiter = "%" ignore_default = no ignore_null = no } # # 'domain\user' # realm ntdomain { format = prefix delimiter = "\\" ignore_default = no ignore_null = no } # A simple value checking module # # It can be used to check if an attribute value in the request # matches a (possibly multi valued) attribute in the check # items This can be used for example for caller-id # authentication. For the module to run, both the request # attribute and the check items attribute must exist # # i.e. # A user has an ldap entry with 2 radiusCallingStationId # attributes with values "12345678" and "12345679". If we # enable rlm_checkval, then any request which contains a # Calling-Station-Id with one of those two values will be # accepted. Requests with other values for # Calling-Station-Id will be rejected. # # Regular expressions in the check attribute value are allowed # as long as the operator is '=~' # checkval { # The attribute to look for in the request item-name = Calling-Station-Id # The attribute to look for in check items. Can be multi valued check-name = Calling-Station-Id # The data type. Can be # string,integer,ipaddr,date,abinary,octets data-type = string # If set to yes and we dont find the item-name attribute in the # request then we send back a reject # DEFAULT is no #notfound-reject = no } # rewrite arbitrary packets. Useful in accounting and authorization. # # # The module can also use the Rewrite-Rule attribute. If it # is set and matches the name of the module instance, then # that module instance will be the only one which runs. # # Also if new_attribute is set to yes then a new attribute # will be created containing the value replacewith and it # will be added to searchin (packet, reply, proxy, proxy_reply or config). # searchfor,ignore_case and max_matches will be ignored in that case. # # Backreferences are supported: %{0} will contain the string the whole match # and %{1} to %{8} will contain the contents of the 1st to the 8th parentheses # # If max_matches is greater than one the backreferences will correspond to the # first match # #attr_rewrite sanecallerid { # attribute = Called-Station-Id # may be "packet", "reply", "proxy", "proxy_reply" or "config" # searchin = packet # searchfor = "[+ ]" # replacewith = "" # ignore_case = no # new_attribute = no # max_matches = 10 # ## If set to yes then the replace string will be appended to the original string # append = no #} # Preprocess the incoming RADIUS request, before handing it off # to other modules. # # This module processes the 'huntgroups' and 'hints' files. # In addition, it re-writes some weird attributes created # by some NASes, and converts the attributes into a form which # is a little more standard. # preprocess { huntgroups = ${confdir}/huntgroups hints = ${confdir}/hints # This hack changes Ascend's wierd port numberings # to standard 0-??? port numbers so that the "+" works # for IP address assignments. with_ascend_hack = no ascend_channels_per_line = 23 # Windows NT machines often authenticate themselves as # NT_DOMAIN\username # # If this is set to 'yes', then the NT_DOMAIN portion # of the user-name is silently discarded. # # This configuration entry SHOULD NOT be used. # See the "realms" module for a better way to handle # NT domains. with_ntdomain_hack = no # Specialix Jetstream 8500 24 port access server. # # If the user name is 10 characters or longer, a "/" # and the excess characters after the 10th are # appended to the user name. # # If you're not running that NAS, you don't need # this hack. with_specialix_jetstream_hack = no # Cisco (and Quintum in Cisco mode) sends it's VSA attributes # with the attribute name *again* in the string, like: # # H323-Attribute = "h323-attribute=value". # # If this configuration item is set to 'yes', then # the redundant data in the the attribute text is stripped # out. The result is: # # H323-Attribute = "value" # # If you're not running a Cisco or Quintum NAS, you don't # need this hack. with_cisco_vsa_hack = no } # Livingston-style 'users' file # files { usersfile = ${confdir}/users acctusersfile = ${confdir}/acct_users preproxy_usersfile = ${confdir}/preproxy_users # If you want to use the old Cistron 'users' file # with FreeRADIUS, you should change the next line # to 'compat = cistron'. You can the copy your 'users' # file from Cistron. compat = no } # Write a detailed log of all accounting records received. # detail { # Note that we do NOT use NAS-IP-Address here, as # that attribute MAY BE from the originating NAS, and # NOT from the proxy which actually sent us the # request. The Client-IP-Address attribute is ALWAYS # the address of the client which sent us the # request. # # The following line creates a new detail file for # every radius client (by IP address or hostname). # In addition, a new detail file is created every # day, so that the detail file doesn't have to go # through a 'log rotation' # # If your detail files are large, you may also want # to add a ':%H' (see doc/variables.txt) to the end # of it, to create a new detail file every hour, e.g.: # # ..../detail-%Y%m%d:%H # # This will create a new detail file for every hour. # detailfile = ${radacctdir}/%{Client-IP-Address}/detail-%Y%m%d # # The Unix-style permissions on the 'detail' file. # # The detail file often contains secret or private # information about users. So by keeping the file # permissions restrictive, we can prevent unwanted # people from seeing that information. detailperm = 0600 # # Certain attributes such as User-Password may be # "sensitive", so they should not be printed in the # detail file. This section lists the attributes # that should be suppressed. # # The attributes should be listed one to a line. # #suppress { # User-Password #} } # # Many people want to log authentication requests. # Rather than modifying the server core to print out more # messages, we can use a different instance of the 'detail' # module, to log the authentication requests to a file. # # You will also need to un-comment the 'auth_log' line # in the 'authorize' section, below. # detail auth_log { detailfile = ${radacctdir}/%{Client-IP-Address}/auth-detail-%Y%m%d # # This MUST be 0600, otherwise anyone can read # the users passwords! detailperm = 0600 } # # This module logs authentication reply packets sent # to a NAS. Both Access-Accept and Access-Reject packets # are logged. # # You will also need to un-comment the 'reply_log' line # in the 'post-auth' section, below. # # detail reply_log { # detailfile = ${radacctdir}/%{Client-IP-Address}/reply-detail-%Y%m%d # # This MUST be 0600, otherwise anyone can read # the users passwords! # detailperm = 0600 # } # # This module logs packets proxied to a home server. # # You will also need to un-comment the 'pre_proxy_log' line # in the 'pre-proxy' section, below. # # detail pre_proxy_log { # detailfile = ${radacctdir}/%{Client-IP-Address}/pre-proxy-detail-%Y%m%d # # This MUST be 0600, otherwise anyone can read # the users passwords! # detailperm = 0600 # } # # -- View this message in context: http://www.nabble.com/PEAP-MSCHAPv2-authentication-problems-tf2145636.html#… Sent from the FreeRadius - User forum at Nabble.com.

4 5

Re: Report Generator
by Sean 25 Aug '06

25 Aug '06

Hi Morder, I've also written a utility to allow users to see their usage. I'm tying it into a complete reporting and statistics package, I expect to have a test version ready over the weekend. As soon as it's ready I'll post a download link here. By the way an official forum for FreeRadius users would be a good idea. I've started an informal forum at http://topup.ie/phpBB2/ I hope it grows into a good site for people to share experience and help each other. Regards, Sean Bracken http://swarmhotspots.com

3 2