- Freeradius-Users - lists.freeradius.org

How I can send many radius requests/packets in parallel mode using radclient?
by work vlpl 21 Feb '19

21 Feb '19

Hello, I am trying to find limitation of my freeradius server setup. To do that I use this command `date && radclient -r 1 -t 1 -q -c 350 -p 350 -f ./radpacket -s 172.31.10.73:1812 auth mysecret && date` I am expecting that `-p` will try to send radius packets in parallel mode. But it seems it does not work. Because, the stats after command finished looks like this ` Thu 21 Feb 17:54:00 UTC 2019 Packet summary: Accepted : 350 Rejected : 0 Lost : 0 Passed filter : 350 Failed filter : 0 Thu 21 Feb 17:54:39 UTC 2019 ` I use `date` command just to understand how much time it take to process 350 requests. I am expecting that if packets were send in parallel mode then processing time should be significant smaller. Also I am reading this in comments from `radiusd.conf` "When the server receives a packet, it places it onto an internal queue, where the worker threads (configured above) pick it up for processing. The maximum size of that queue is given here. When the queue is full, any new packets will be silently discarded." But stats show me that 0 packets were lost. I admit that maybe I use `raclient` in the wrong way. I used these emails http://lists.freeradius.org/pipermail/freeradius-users/2016-February/082013… http://lists.freeradius.org/pipermail/freeradius-users/2007-November/023477… and man pages as guides how to use radclient to send packets in parallel mode. So I don't understand what I am missing, and looking how I can send many radius packets in parallel mode. Can somebody help me with this?

2 1

Supporting EAP-PWD with a whitelist
by Richter, Jan 21 Feb '19

21 Feb '19

Hello, we have a freeradius 3.0.17 server configuration which already supports EAP-TTLS and EAP-PEAP. We now want to add support for EAP-PWD. So far this has been quite easy (just enabling the pwd subsection of the EAP module), but I faced some problems with using a whitelist. As our production setup is quite complex, I explain the issue via the smallest modification to the standard config. A full debug output of this is attached in [1]. A normal whitelist is done like this: mods-config/files_whitelist/whitelist bob DEFAULT Auth-Type := Reject And this is used in the inner-tunnel: sites-available/inner-tunnel authorize { filter_username chap mschap suffix eap { ok = return } files # <- get users password, this is substituted by ldap in our production server files_whitelist # <- whitelist pap } This works as intended with TTLS. For adding PWD it does not work, as PWD does not check the return status of the inner-tunnel, this is intended. So I need to do the authorization in the outer server: sites-available/default authorize { filter_username chap mschap suffix eap { ok = return } files_whitelist # <- whitelist pap } But this now kills the TTLS-Authorization, as users set anonymous as outer identity and this will get blocked in the outer server by the whitelist. A workaround could be to also add "updated = return" to the eap module of the outer server but that would destroy the whitelist for PWD again, as nothing after the eap module gets executed. So I can either choose the above and PWD works, but nobody can use TTLS with an anonymous identity or I add the "updated = return" and every user in our database can bypass the whitelist via choosing EAP-PWD. There are two solutions that I can see: (1) Either I only do the authorization in the inner-tunnel (also for PWD) and copy the result via the session-state attributes to the outer server or (2) I introduce an unlang if-clause to the outer server to handle EAP-PWD differently, like: eap { ok = return } if (EAP-PWD) { <- How does this condition look like? files_whitelist # <- whitelist } else { noop } Has someone already used EAP-PWD together with a whitelist? What is the preferred solution? Or am I just using the configuration wrong? Kind regards, Jan Niklas Richter [1] As the files modue config is not included in debug output here it is: mods-config/files/authorize: bob Cleartext-Password := "hello" Reply-Message := "Hello, %{User-Name}" bob2 Cleartext-Password := "hello" Reply-Message := "Hello, %{User-Name}" mods-config/files_whitelist/whitelist: bob Reply-Message = "Hello, %{User-Name}" DEFAULT Auth-Type := Reject Reply-Message = "Your account has been disabled." Output of radiusd -X: Requests 0-1 are from bob doing TTLS -> should work, does not Requests 2-3 are from bob2 doing TTLS -> should not work, is correct Requests 4-8 are from bob doing EAP-PWD -> should work, is correct Requests 9-10 are from bob2 doing EAP-PWD -> should not work, is correct $ radiusd -X FreeRADIUS Version 3.0.17 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/local/share/freeradius/dictionary including dictionary file /usr/local/share/freeradius/dictionary.dhcp including dictionary file /usr/local/share/freeradius/dictionary.vqp including dictionary file /usr/local/etc/raddb/dictionary including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/mods-enabled/ including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp including configuration file /usr/local/etc/raddb/mods-enabled/utf8 including configuration file /usr/local/etc/raddb/mods-enabled/digest including configuration file /usr/local/etc/raddb/mods-enabled/detail including configuration file /usr/local/etc/raddb/mods-enabled/chap including configuration file /usr/local/etc/raddb/mods-enabled/detail.log including configuration file /usr/local/etc/raddb/mods-enabled/unix including configuration file /usr/local/etc/raddb/mods-enabled/expr including configuration file /usr/local/etc/raddb/mods-enabled/files including configuration file /usr/local/etc/raddb/mods-enabled/preprocess including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter including configuration file /usr/local/etc/raddb/mods-enabled/mschap including configuration file /usr/local/etc/raddb/mods-enabled/date including configuration file /usr/local/etc/raddb/mods-enabled/expiration including configuration file /usr/local/etc/raddb/mods-enabled/exec including configuration file /usr/local/etc/raddb/mods-enabled/passwd including configuration file /usr/local/etc/raddb/mods-enabled/radutmp including configuration file /usr/local/etc/raddb/mods-enabled/always including configuration file /usr/local/etc/raddb/mods-enabled/realm including configuration file /usr/local/etc/raddb/mods-enabled/eap including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients including configuration file /usr/local/etc/raddb/mods-enabled/logintime including configuration file /usr/local/etc/raddb/mods-enabled/pap including configuration file /usr/local/etc/raddb/mods-enabled/linelog including configuration file /usr/local/etc/raddb/mods-enabled/unpack including configuration file /usr/local/etc/raddb/mods-enabled/soh including configuration file /usr/local/etc/raddb/mods-enabled/replicate including configuration file /usr/local/etc/raddb/mods-enabled/echo including configuration file /usr/local/etc/raddb/mods-enabled/files_whitelist including files in directory /usr/local/etc/raddb/policy.d/ including configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-ids including configuration file /usr/local/etc/raddb/policy.d/abfab-tr including configuration file /usr/local/etc/raddb/policy.d/debug including configuration file /usr/local/etc/raddb/policy.d/accounting including configuration file /usr/local/etc/raddb/policy.d/cui including configuration file /usr/local/etc/raddb/policy.d/operator-name including configuration file /usr/local/etc/raddb/policy.d/canonicalization including configuration file /usr/local/etc/raddb/policy.d/filter including configuration file /usr/local/etc/raddb/policy.d/eap including configuration file /usr/local/etc/raddb/policy.d/control including configuration file /usr/local/etc/raddb/policy.d/dhcp including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" } main { name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" sbindir = "/usr/local/sbin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_radutmp # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/usr/local/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8 # Loaded module rlm_digest # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest # Loaded module rlm_detail # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail detail { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_chap # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_unix # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_expr # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files files { filename = "/usr/local/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_preprocess # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_mschap # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_date # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loaded module rlm_expiration # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Loaded module rlm_exec # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_always # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_realm # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_eap # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_cache # Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_logintime # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_pap # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_linelog # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog linelog { filename = "/usr/local/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/usr/local/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unpack # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack # Loaded module rlm_soh # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "files_whitelist" from file /usr/local/etc/raddb/mods-enabled/files_whitelist files files_whitelist { filename = "/usr/local/etc/raddb/mods-config/files_whitelist/whitelist" } instantiate { } # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_pwd pwd { group = 19 fragment_size = 1020 server_id = "theserver(a)example.com" virtual_server = "inner-tunnel" } # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" ca_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/usr/local/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "files_whitelist" from file /usr/local/etc/raddb/mods-enabled/files_whitelist reading pairlist file /usr/local/etc/raddb/mods-config/files_whitelist/whitelist } # modules radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc/raddb/radiusd.conf } # server server default { # from file /usr/local/etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /usr/local/etc/raddb/sites-enabled/inner-tunnel:332 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 42136 Listening on proxy address :: port 33890 Ready to process requests (0) Received Access-Request Id 0 from 127.0.0.1:40230 to 127.0.0.1:1812 length 132 (0) User-Name = "anonymous" (0) NAS-IP-Address = 127.0.0.1 (0) Calling-Station-Id = "02-00-00-00-00-01" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Connect-Info = "CONNECT 11Mbps 802.11b" (0) EAP-Message = 0x0200000e01616e6f6e796d6f7573 (0) Message-Authenticator = 0x58014fe1322620e597f0770a570418f7 (0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 14 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 1 length 22 (0) eap: EAP session adding &reply:State = 0x24777c502476782c (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:40230 length 0 (0) EAP-Message = 0x010100160410a5863c91d1344a06ab5b9bb8eaf3ba2f (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x24777c502476782cd8b4522ec21dc968 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 1 from 127.0.0.1:40230 to 127.0.0.1:1812 length 142 (1) User-Name = "anonymous" (1) NAS-IP-Address = 127.0.0.1 (1) Calling-Station-Id = "02-00-00-00-00-01" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Connect-Info = "CONNECT 11Mbps 802.11b" (1) EAP-Message = 0x020100060315 (1) State = 0x24777c502476782cd8b4522ec21dc968 (1) Message-Authenticator = 0x452e316c7f4dfa36ecc1eeb3e5c9c3b5 (1) session-state: No cached attributes (1) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 1 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop (1) files_whitelist: users: Matched entry DEFAULT at line 89 (1) [files_whitelist] = ok (1) [expiration] = noop (1) [logintime] = noop (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = Reject (1) Auth-Type = Reject, rejecting user (1) Failed to authenticate the user (1) Using Post-Auth-Type Reject (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (1) Post-Auth-Type REJECT { (1) attr_filter.access_reject: EXPAND %{User-Name} (1) attr_filter.access_reject: --> anonymous (1) attr_filter.access_reject: Matched entry DEFAULT at line 11 (1) [attr_filter.access_reject] = updated (1) eap: Expiring EAP session with state 0x24777c502476782c (1) eap: Finished EAP session with state 0x24777c502476782c (1) eap: Previous EAP request found for state 0x24777c502476782c, released from the list (1) eap: Request was previously rejected, inserting EAP-Failure (1) eap: Sending EAP Failure (code 4) ID 1 length 4 (1) [eap] = updated (1) policy remove_reply_message_if_eap { (1) if (&reply:EAP-Message && &reply:Reply-Message) { (1) if (&reply:EAP-Message && &reply:Reply-Message) -> TRUE (1) if (&reply:EAP-Message && &reply:Reply-Message) { (1) update reply { (1) &Reply-Message !* ANY (1) } # update reply = noop (1) } # if (&reply:EAP-Message && &reply:Reply-Message) = noop (1) ... skipping else: Preceding "if" was taken (1) } # policy remove_reply_message_if_eap = noop (1) } # Post-Auth-Type REJECT = updated (1) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (1) Sending delayed response (1) Sent Access-Reject Id 1 from 127.0.0.1:1812 to 127.0.0.1:40230 length 44 (1) EAP-Message = 0x04010004 (1) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 0 with timestamp +23 (1) Cleaning up request packet ID 1 with timestamp +23 Ready to process requests (2) Received Access-Request Id 0 from 127.0.0.1:34655 to 127.0.0.1:1812 length 132 (2) User-Name = "anonymous" (2) NAS-IP-Address = 127.0.0.1 (2) Calling-Station-Id = "02-00-00-00-00-01" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Connect-Info = "CONNECT 11Mbps 802.11b" (2) EAP-Message = 0x0200000e01616e6f6e796d6f7573 (2) Message-Authenticator = 0xcb7b113ddf5cdc850f6f065fb1042998 (2) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 0 length 14 (2) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Peer sent packet with method EAP Identity (1) (2) eap: Calling submodule eap_md5 to process data (2) eap_md5: Issuing MD5 Challenge (2) eap: Sending EAP Request (code 1) ID 1 length 22 (2) eap: EAP session adding &reply:State = 0xfb468ffdfb478b72 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:34655 length 0 (2) EAP-Message = 0x0101001604103d49726f11ca7f1ee00540221e9c5614 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xfb468ffdfb478b72b46fd038661bd219 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 1 from 127.0.0.1:34655 to 127.0.0.1:1812 length 142 (3) User-Name = "anonymous" (3) NAS-IP-Address = 127.0.0.1 (3) Calling-Station-Id = "02-00-00-00-00-01" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Connect-Info = "CONNECT 11Mbps 802.11b" (3) EAP-Message = 0x020100060315 (3) State = 0xfb468ffdfb478b72b46fd038661bd219 (3) Message-Authenticator = 0xebce674d683f033c22da2728ff2154db (3) session-state: No cached attributes (3) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 1 length 6 (3) eap: No EAP Start, assuming it's an on-going EAP conversation (3) [eap] = updated (3) [files] = noop (3) files_whitelist: users: Matched entry DEFAULT at line 89 (3) [files_whitelist] = ok (3) [expiration] = noop (3) [logintime] = noop (3) pap: WARNING: Auth-Type already set. Not setting to PAP (3) [pap] = noop (3) } # authorize = updated (3) Found Auth-Type = Reject (3) Auth-Type = Reject, rejecting user (3) Failed to authenticate the user (3) Using Post-Auth-Type Reject (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (3) Post-Auth-Type REJECT { (3) attr_filter.access_reject: EXPAND %{User-Name} (3) attr_filter.access_reject: --> anonymous (3) attr_filter.access_reject: Matched entry DEFAULT at line 11 (3) [attr_filter.access_reject] = updated (3) eap: Expiring EAP session with state 0xfb468ffdfb478b72 (3) eap: Finished EAP session with state 0xfb468ffdfb478b72 (3) eap: Previous EAP request found for state 0xfb468ffdfb478b72, released from the list (3) eap: Request was previously rejected, inserting EAP-Failure (3) eap: Sending EAP Failure (code 4) ID 1 length 4 (3) [eap] = updated (3) policy remove_reply_message_if_eap { (3) if (&reply:EAP-Message && &reply:Reply-Message) { (3) if (&reply:EAP-Message && &reply:Reply-Message) -> TRUE (3) if (&reply:EAP-Message && &reply:Reply-Message) { (3) update reply { (3) &Reply-Message !* ANY (3) } # update reply = noop (3) } # if (&reply:EAP-Message && &reply:Reply-Message) = noop (3) ... skipping else: Preceding "if" was taken (3) } # policy remove_reply_message_if_eap = noop (3) } # Post-Auth-Type REJECT = updated (3) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (3) Sending delayed response (3) Sent Access-Reject Id 1 from 127.0.0.1:1812 to 127.0.0.1:34655 length 44 (3) EAP-Message = 0x04010004 (3) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (2) Cleaning up request packet ID 0 with timestamp +103 (3) Cleaning up request packet ID 1 with timestamp +103 Ready to process requests (4) Received Access-Request Id 0 from 127.0.0.1:32835 to 127.0.0.1:1812 length 120 (4) User-Name = "bob" (4) NAS-IP-Address = 127.0.0.1 (4) Calling-Station-Id = "02-00-00-00-00-01" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Connect-Info = "CONNECT 11Mbps 802.11b" (4) EAP-Message = 0x0200000801626f62 (4) Message-Authenticator = 0x437f8897606b2611aee7efdca3750c34 (4) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "bob", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 0 length 8 (4) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Peer sent packet with method EAP Identity (1) (4) eap: Calling submodule eap_md5 to process data (4) eap_md5: Issuing MD5 Challenge (4) eap: Sending EAP Request (code 1) ID 1 length 22 (4) eap: EAP session adding &reply:State = 0xbca001aabca1058c (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:32835 length 0 (4) EAP-Message = 0x01010016041040915ea8b42f19d7923c748a6de4be4d (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xbca001aabca1058cd93e9f3cb1c945ed (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 1 from 127.0.0.1:32835 to 127.0.0.1:1812 length 136 (5) User-Name = "bob" (5) NAS-IP-Address = 127.0.0.1 (5) Calling-Station-Id = "02-00-00-00-00-01" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Connect-Info = "CONNECT 11Mbps 802.11b" (5) EAP-Message = 0x020100060334 (5) State = 0xbca001aabca1058cd93e9f3cb1c945ed (5) Message-Authenticator = 0x6f0fd26f81c6724313e9810f0f9decc4 (5) session-state: No cached attributes (5) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "bob", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 1 length 6 (5) eap: No EAP Start, assuming it's an on-going EAP conversation (5) [eap] = updated (5) files: users: Matched entry bob at line 87 (5) files: EXPAND Hello, %{User-Name} (5) files: --> Hello, bob (5) [files] = ok (5) files_whitelist: users: Matched entry bob at line 87 (5) files_whitelist: EXPAND Hello, %{User-Name} (5) files_whitelist: --> Hello, bob (5) [files_whitelist] = ok (5) [expiration] = noop (5) [logintime] = noop (5) pap: WARNING: Auth-Type already set. Not setting to PAP (5) [pap] = noop (5) } # authorize = updated (5) Found Auth-Type = eap (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xbca001aabca1058c (5) eap: Finished EAP session with state 0xbca001aabca1058c (5) eap: Previous EAP request found for state 0xbca001aabca1058c, released from the list (5) eap: Peer sent packet with method EAP NAK (3) (5) eap: Found mutually acceptable type PWD (52) (5) eap: Calling submodule eap_pwd to process data (5) eap: Sending EAP Request (code 1) ID 2 length 36 (5) eap: EAP session adding &reply:State = 0xbca001aabda2358c (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:32835 length 0 (5) Reply-Message = "Hello, bob" (5) EAP-Message = 0x0102002434010013010119fce9a800746865736572766572406578616d706c652e636f6d (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xbca001aabda2358cd93e9f3cb1c945ed (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 2 from 127.0.0.1:32835 to 127.0.0.1:1812 length 148 (6) User-Name = "bob" (6) NAS-IP-Address = 127.0.0.1 (6) Calling-Station-Id = "02-00-00-00-00-01" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Connect-Info = "CONNECT 11Mbps 802.11b" (6) EAP-Message = 0x0202001234010013010119fce9a800626f62 (6) State = 0xbca001aabda2358cd93e9f3cb1c945ed (6) Message-Authenticator = 0x6b74dccf75231c2a7b140a136bd9f253 (6) session-state: No cached attributes (6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "bob", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 2 length 18 (6) eap: No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) files: users: Matched entry bob at line 87 (6) files: EXPAND Hello, %{User-Name} (6) files: --> Hello, bob (6) [files] = ok (6) files_whitelist: users: Matched entry bob at line 87 (6) files_whitelist: EXPAND Hello, %{User-Name} (6) files_whitelist: --> Hello, bob (6) [files_whitelist] = ok (6) [expiration] = noop (6) [logintime] = noop (6) pap: WARNING: Auth-Type already set. Not setting to PAP (6) [pap] = noop (6) } # authorize = updated (6) Found Auth-Type = eap (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xbca001aabda2358c (6) eap: Finished EAP session with state 0xbca001aabda2358c (6) eap: Previous EAP request found for state 0xbca001aabda2358c, released from the list (6) eap: Peer sent packet with method EAP PWD (52) (6) eap: Calling submodule eap_pwd to process data (6) eap_pwd: Sending tunneled request (6) eap_pwd: User-Name = "bob" (6) eap_pwd: server inner-tunnel { (6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "bob", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: No EAP-Message, not doing EAP (6) [eap] = noop (6) files: users: Matched entry bob at line 87 (6) files: EXPAND Hello, %{User-Name} (6) files: --> Hello, bob (6) [files] = ok (6) files_whitelist: users: Matched entry bob at line 87 (6) files_whitelist: EXPAND Hello, %{User-Name} (6) files_whitelist: --> Hello, bob (6) [files_whitelist] = ok (6) [expiration] = noop (6) [logintime] = noop (6) pap: No User-Password attribute in the request. Cannot do PAP (6) [pap] = noop (6) } # authorize = ok (6) eap_pwd: } # server inner-tunnel (6) eap_pwd: Got tunneled reply code 0 (6) eap_pwd: Reply-Message = "Hello, bob" (6) eap: Sending EAP Request (code 1) ID 3 length 102 (6) eap: EAP session adding &reply:State = 0xbca001aabea3358c (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:32835 length 0 (6) Reply-Message = "Hello, bob" (6) EAP-Message = 0x0103006634028ec29559fc18e8e5fba5b1ca7c53ce842611f44f250e80381b7be7745fdbbe2ebdf8dc763a42d8f1e42dd6534c5871b148db377d4064712caa4065b7dc60f51f835b094fa734573e016afe092c070548911a9a79ee41e7d32fc04076e0857342 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xbca001aabea3358cd93e9f3cb1c945ed (6) Finished request Waking up in 4.9 seconds. (7) Received Access-Request Id 3 from 127.0.0.1:32835 to 127.0.0.1:1812 length 232 (7) User-Name = "bob" (7) NAS-IP-Address = 127.0.0.1 (7) Calling-Station-Id = "02-00-00-00-00-01" (7) Framed-MTU = 1400 (7) NAS-Port-Type = Wireless-802.11 (7) Service-Type = Framed-User (7) Connect-Info = "CONNECT 11Mbps 802.11b" (7) EAP-Message = 0x02030066340286b2eaebafe2a3ecafcdceebb79de270a92f94a9565a1797bb899efa39f115b27b19a5744757340e74d4f9acbd5fc278f199e09f02174cad3276fa5af7b1b5c9d9763d07e95b6e30c81a8b6c4f1b869be2a16cb8a704b4d2034c746e48c9b916 (7) State = 0xbca001aabea3358cd93e9f3cb1c945ed (7) Message-Authenticator = 0x975470816e41cb11665cb2e9591dd400 (7) session-state: No cached attributes (7) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "bob", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 3 length 102 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) files: users: Matched entry bob at line 87 (7) files: EXPAND Hello, %{User-Name} (7) files: --> Hello, bob (7) [files] = ok (7) files_whitelist: users: Matched entry bob at line 87 (7) files_whitelist: EXPAND Hello, %{User-Name} (7) files_whitelist: --> Hello, bob (7) [files_whitelist] = ok (7) [expiration] = noop (7) [logintime] = noop (7) pap: WARNING: Auth-Type already set. Not setting to PAP (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xbca001aabea3358c (7) eap: Finished EAP session with state 0xbca001aabea3358c (7) eap: Previous EAP request found for state 0xbca001aabea3358c, released from the list (7) eap: Peer sent packet with method EAP PWD (52) (7) eap: Calling submodule eap_pwd to process data (7) eap: Sending EAP Request (code 1) ID 4 length 38 (7) eap: EAP session adding &reply:State = 0xbca001aabfa4358c (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:32835 length 0 (7) Reply-Message = "Hello, bob" (7) EAP-Message = 0x010400263403a4b27ab89faf4f93dd8870d61eb856692d764d794f85094fd8e86410e206184c (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xbca001aabfa4358cd93e9f3cb1c945ed (7) Finished request Waking up in 4.9 seconds. (8) Received Access-Request Id 4 from 127.0.0.1:32835 to 127.0.0.1:1812 length 168 (8) User-Name = "bob" (8) NAS-IP-Address = 127.0.0.1 (8) Calling-Station-Id = "02-00-00-00-00-01" (8) Framed-MTU = 1400 (8) NAS-Port-Type = Wireless-802.11 (8) Service-Type = Framed-User (8) Connect-Info = "CONNECT 11Mbps 802.11b" (8) EAP-Message = 0x0204002634037c12b6a1659eb7bb6ffe17023410b5788cbeb8dac3a6fff05cced588c45247bc (8) State = 0xbca001aabfa4358cd93e9f3cb1c945ed (8) Message-Authenticator = 0x2b451021e60e1a436f796a2072f44dd6 (8) session-state: No cached attributes (8) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "bob", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 4 length 38 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) files: users: Matched entry bob at line 87 (8) files: EXPAND Hello, %{User-Name} (8) files: --> Hello, bob (8) [files] = ok (8) files_whitelist: users: Matched entry bob at line 87 (8) files_whitelist: EXPAND Hello, %{User-Name} (8) files_whitelist: --> Hello, bob (8) [files_whitelist] = ok (8) [expiration] = noop (8) [logintime] = noop (8) pap: WARNING: Auth-Type already set. Not setting to PAP (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0xbca001aabfa4358c (8) eap: Finished EAP session with state 0xbca001aabfa4358c (8) eap: Previous EAP request found for state 0xbca001aabfa4358c, released from the list (8) eap: Peer sent packet with method EAP PWD (52) (8) eap: Calling submodule eap_pwd to process data (8) eap: Sending EAP Success (code 3) ID 4 length 4 (8) eap: Freeing handler (8) [eap] = ok (8) } # authenticate = ok (8) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default (8) post-auth { (8) update { (8) No attributes updated (8) } # update = noop (8) [exec] = noop (8) policy remove_reply_message_if_eap { (8) if (&reply:EAP-Message && &reply:Reply-Message) { (8) if (&reply:EAP-Message && &reply:Reply-Message) -> TRUE (8) if (&reply:EAP-Message && &reply:Reply-Message) { (8) update reply { (8) &Reply-Message !* ANY (8) } # update reply = noop (8) } # if (&reply:EAP-Message && &reply:Reply-Message) = noop (8) ... skipping else: Preceding "if" was taken (8) } # policy remove_reply_message_if_eap = noop (8) } # post-auth = noop (8) Sent Access-Accept Id 4 from 127.0.0.1:1812 to 127.0.0.1:32835 length 0 (8) MS-MPPE-Recv-Key = 0x7dbf6ce40ed2205c2ab292002359326110b3e985b933a9297bcc13060d1d83e7 (8) MS-MPPE-Send-Key = 0x5d5a2de539a1cefe7c3df55837a3681672414e1517c8a240582c2e9521166ffc (8) EAP-Message = 0x03040004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) User-Name = "bob" (8) Finished request Waking up in 4.9 seconds. (4) Cleaning up request packet ID 0 with timestamp +136 (5) Cleaning up request packet ID 1 with timestamp +136 (6) Cleaning up request packet ID 2 with timestamp +136 (7) Cleaning up request packet ID 3 with timestamp +136 (8) Cleaning up request packet ID 4 with timestamp +136 Ready to process requests (9) Received Access-Request Id 0 from 127.0.0.1:33785 to 127.0.0.1:1812 length 122 (9) User-Name = "bob2" (9) NAS-IP-Address = 127.0.0.1 (9) Calling-Station-Id = "02-00-00-00-00-01" (9) Framed-MTU = 1400 (9) NAS-Port-Type = Wireless-802.11 (9) Service-Type = Framed-User (9) Connect-Info = "CONNECT 11Mbps 802.11b" (9) EAP-Message = 0x0200000901626f6232 (9) Message-Authenticator = 0x1b66679db7c33d0538c571a46c34c548 (9) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "bob2", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 0 length 9 (9) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (9) authenticate { (9) eap: Peer sent packet with method EAP Identity (1) (9) eap: Calling submodule eap_md5 to process data (9) eap_md5: Issuing MD5 Challenge (9) eap: Sending EAP Request (code 1) ID 1 length 22 (9) eap: EAP session adding &reply:State = 0x512c9c3a512d98f8 (9) [eap] = handled (9) } # authenticate = handled (9) Using Post-Auth-Type Challenge (9) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (9) Challenge { ... } # empty sub-section is ignored (9) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:33785 length 0 (9) EAP-Message = 0x01010016041056dc5e8c153f21791658f29434a035c1 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0x512c9c3a512d98f837f85b7de328d888 (9) Finished request Waking up in 4.9 seconds. (10) Received Access-Request Id 1 from 127.0.0.1:33785 to 127.0.0.1:1812 length 137 (10) User-Name = "bob2" (10) NAS-IP-Address = 127.0.0.1 (10) Calling-Station-Id = "02-00-00-00-00-01" (10) Framed-MTU = 1400 (10) NAS-Port-Type = Wireless-802.11 (10) Service-Type = Framed-User (10) Connect-Info = "CONNECT 11Mbps 802.11b" (10) EAP-Message = 0x020100060334 (10) State = 0x512c9c3a512d98f837f85b7de328d888 (10) Message-Authenticator = 0x80ab9f7646067497b39302c24e95d9a2 (10) session-state: No cached attributes (10) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "bob2", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) eap: Peer sent EAP Response (code 2) ID 1 length 6 (10) eap: No EAP Start, assuming it's an on-going EAP conversation (10) [eap] = updated (10) files: users: Matched entry bob2 at line 89 (10) files: EXPAND Hello, %{User-Name} (10) files: --> Hello, bob2 (10) [files] = ok (10) files_whitelist: users: Matched entry DEFAULT at line 89 (10) [files_whitelist] = ok (10) [expiration] = noop (10) [logintime] = noop (10) pap: WARNING: Auth-Type already set. Not setting to PAP (10) [pap] = noop (10) } # authorize = updated (10) Found Auth-Type = Reject (10) Auth-Type = Reject, rejecting user (10) Failed to authenticate the user (10) Using Post-Auth-Type Reject (10) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (10) Post-Auth-Type REJECT { (10) attr_filter.access_reject: EXPAND %{User-Name} (10) attr_filter.access_reject: --> bob2 (10) attr_filter.access_reject: Matched entry DEFAULT at line 11 (10) [attr_filter.access_reject] = updated (10) eap: Expiring EAP session with state 0x512c9c3a512d98f8 (10) eap: Finished EAP session with state 0x512c9c3a512d98f8 (10) eap: Previous EAP request found for state 0x512c9c3a512d98f8, released from the list (10) eap: Request was previously rejected, inserting EAP-Failure (10) eap: Sending EAP Failure (code 4) ID 1 length 4 (10) [eap] = updated (10) policy remove_reply_message_if_eap { (10) if (&reply:EAP-Message && &reply:Reply-Message) { (10) if (&reply:EAP-Message && &reply:Reply-Message) -> TRUE (10) if (&reply:EAP-Message && &reply:Reply-Message) { (10) update reply { (10) &Reply-Message !* ANY (10) } # update reply = noop (10) } # if (&reply:EAP-Message && &reply:Reply-Message) = noop (10) ... skipping else: Preceding "if" was taken (10) } # policy remove_reply_message_if_eap = noop (10) } # Post-Auth-Type REJECT = updated (10) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (10) Sending delayed response (10) Sent Access-Reject Id 1 from 127.0.0.1:1812 to 127.0.0.1:33785 length 44 (10) EAP-Message = 0x04010004 (10) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (9) Cleaning up request packet ID 0 with timestamp +171 (10) Cleaning up request packet ID 1 with timestamp +171 Ready to process requests

2 2

Machine Authentication with NTLM followed by LDAP group authorization
by Travis Dimmig 20 Feb '19

20 Feb '19

Hello list! Sorry ahead of time for the long explanation: I'm trying to configure FreeRADIUS to do authentication with the mchap module, then use the LDAP module to authorize the request based on group membership. I have this working as expected for user authentication, no problem there. What I'm not sure on is the best way to do it for machine authentications as well. For the mschap portion, using a username of %{mschap:User-Name} causes the supplied string like "host/machine.company.example.com" to be changed to "machine$" when invoking the ntlm_auth binary, which makes it match the samAccountName in AD for that computer record. When setting up the filter for the LDAP search then, is there a standard way to convert the User-Name the same way the mschap module does so I can use the same filter for user authentication and machine authentication (both checking samAccountName)? The other alternative that I maybe found is that computer records in AD seem to have a "servicePrincipalName" attribute whose value is the whole "host/machine.domain.com" string. I could setup the LDAP filter to match either samAccountName or servicePrincipalName, I just don't know if the latter is something I can guarantee will always work that way that I can rely on (I'm not familiar with that attribute). Once the first search is done to fetch the DN of the record, the group membership query is working fine for both users and machines, I'm just not sure what is the best way to match the machine name. Here's some example ldapsearch invocations I was using to try to nail this down: ## Idea one, make a filter that finds either a user or a computer object by updating the filter to check samAccountName or servicePrincipalName ldapsearch -D 'cn=Administrator,cn=users,dc=company,dc=example,dc=com' -W -p 389 -h [IP] -b "dc=company,dc=example,dc=com" "(|(samAccountName=tdimmig)(servicePrincipalName=tdimmig))" ldapsearch -D 'cn=Administrator,cn=users,dc=company,dc=example,dc=com' -W -p 389 -h [IP] -b "dc=company,dc=example,dc=com" "(|(samAccountName=host/machine.company.example.com)(servicePrincipalName=host/machine.company.example.com))" ## Idea two, can I normalize the "host/machine.company.example.com" type of usernames to the "machine$" type to then always query the samAccountName attribute ldapsearch -D 'cn=Administrator,cn=users,dc=company,dc=example,dc=com' -W -p 389 -h [IP] -b "dc=company,dc=example,dc=com" "(samAccountName=tdimmig)" ldapsearch -D 'cn=Administrator,cn=users,dc=company,dc=example,dc=com' -W -p 389 -h [IP]-b "dc=company,dc=example,dc=com" "(samAccountName=machine$)" Thanks, Travis Dimmig

1 0

Unexpected Disconnect Message to NAS
by Vladimir Cvetic 20 Feb '19

20 Feb '19

Hi, first of all apologies for maybe not seeing the obvious solution. I have the following setup: An OpenWRT AccessPoint with EAP configured authenticating against freeradius with a mariadb backend. Accounting on freeradius is enabled to cover two use cases: 1. restrict daily session time for users (working): freeradius sends disconnect messages to my NAS (based on OpenWRT) by checking the max-daily-session attribute. 2. restrict login time for users (not working) user are only allowed to login at certain times. In the accounting section I have the following sql check in order to send disconnect messages to the NAS: if ( "%{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct where UserName='%{User-Name}'}" > "%{sql: SELECT value from radcheck where username='%{User-Name}' and attribute='Max-Daily-Session'}" ) { update disconnect { &Acct-Session-Id = "%{Acct-Session-Id}" &User-Name = "%{User-Name}" &Calling-Station-Id = "%{Calling-Station-Id}" } } The user I'm trying to login doesn't have the attribute Max-Daily-Session in the radcheck table: MariaDB [radius]> select * from radcheck where username='vlado'; +----+----------+--------------------+----+-------------+ | id | username | attribute | op | value | +----+----------+--------------------+----+-------------+ | 2 | vlado | Cleartext-Password | := | hello | | 10 | vlado | Login-Time | := | Al0001-2359 | +----+----------+--------------------+----+-------------+ 2 rows in set (0.00 sec) Expected behaviour: user can login according login-time attribute without having max-daily-session attribute defined. the if statement should return false. Actual behaviour: the if statement always evaluates to 'True' and kicks the user out. Even with an empty radacct table the statement evaluates to 'True'. I have two questions: 1. How can I avoid defining Max-Daily-Sesion and login-time attributes for the second use case (restrict login time for users)? 2. how to disconnect user based on defined login-time? Thanks for any help in advance! FreeRADIUS Version 3.0.12 Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/sqlcounter including configuration file /etc/freeradius/3.0/mods-config/sql/counter/mysql/dailycounter.conf including configuration file /etc/freeradius/3.0/mods-config/sql/counter/mysql/monthlycounter.conf including configuration file /etc/freeradius/3.0/mods-config/sql/counter/mysql/noresetcounter.conf including configuration file /etc/freeradius/3.0/mods-config/sql/counter/mysql/expire_on_login.conf including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/sql including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf including configuration file /etc/freeradius/3.0/mods-enabled/exec including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/operator-name including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/coa including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server AP-2 { ipaddr = 192.168.1.2 port = 3799 type = "coa" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "none" ping_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server AP-1 { ipaddr = 192.168.1.1 port = 3799 type = "coa" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "none" ping_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_sqlcounter # Loading module "dailycounter" from file /etc/freeradius/3.0/mods-enabled/sqlcounter sqlcounter dailycounter { sql_module_instance = "sql" key = "User-Name" query = "SELECT IFNULL(SUM(acctsessiontime - GREATEST((%%b - UNIX_TIMESTAMP(acctstarttime)), 0)),0) FROM radacct WHERE username = '%{User-Name}' AND UNIX_TIMESTAMP(acctstarttime) + acctsessiontime > '%%b'" reset = "daily" counter_name = "Daily-Session-Time" check_name = "Max-Daily-Session" reply_name = "Session-Timeout" } # Loading module "monthlycounter" from file /etc/freeradius/3.0/mods-enabled/sqlcounter sqlcounter monthlycounter { sql_module_instance = "sql" key = "User-Name" query = "SELECT SUM(acctsessiontime - GREATEST((%%b - UNIX_TIMESTAMP(acctstarttime)), 0)) FROM radacct WHERE username='%{User-Name}' AND UNIX_TIMESTAMP(acctstarttime) + acctsessiontime > '%%b'" reset = "monthly" counter_name = "Monthly-Session-Time" check_name = "Max-Monthly-Session" reply_name = "Session-Timeout" } # Loading module "noresetcounter" from file /etc/freeradius/3.0/mods-enabled/sqlcounter sqlcounter noresetcounter { sql_module_instance = "sql" key = "User-Name" query = "SELECT IFNULL(SUM(AcctSessionTime),0) FROM radacct WHERE UserName='%{User-Name}'" reset = "never" counter_name = "Max-All-Session-Time" check_name = "Max-All-Session" reply_name = "Session-Timeout" } # Loading module "expire_on_login" from file /etc/freeradius/3.0/mods-enabled/sqlcounter sqlcounter expire_on_login { sql_module_instance = "sql" key = "User-Name" query = "SELECT IFNULL( MAX(TIME_TO_SEC(TIMEDIFF(NOW(), acctstarttime))),0) FROM radacct WHERE UserName='%{User-Name}' ORDER BY acctstarttime LIMIT 1;" reset = "never" counter_name = "Expire-After-Initial-Login" check_name = "Expire-After" reply_name = "Session-Timeout" } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 0 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } instantiate { # Instantiating module "dailycounter" from file /etc/freeradius/3.0/mods-enabled/sqlcounter rlm_sqlcounter: Current Time: 1550488138 [2019-02-18 12:08:58], Next reset 1550530800 [2019-02-19 00:00:00] rlm_sqlcounter: Current Time: 1550488138 [2019-02-18 12:08:58], Prev reset 1550444400 [2019-02-18 00:00:00] } # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "monthlycounter" from file /etc/freeradius/3.0/mods-enabled/sqlcounter rlm_sqlcounter: Current Time: 1550488138 [2019-02-18 12:08:58], Next reset 1551394800 [2019-03-01 00:00:00] rlm_sqlcounter: Current Time: 1550488138 [2019-02-18 12:08:58], Prev reset 1548975600 [2019-02-01 00:00:00] # Instantiating module "noresetcounter" from file /etc/freeradius/3.0/mods-enabled/sqlcounter rlm_sqlcounter: Current Time: 1550488138 [2019-02-18 12:08:58], Next reset 0 [2019-02-18 12:00:00] rlm_sqlcounter: Current Time: 1550488138 [2019-02-18 12:08:58], Prev reset 0 [2019-02-18 12:00:00] # Instantiating module "expire_on_login" from file /etc/freeradius/3.0/mods-enabled/sqlcounter rlm_sqlcounter: Current Time: 1550488138 [2019-02-18 12:08:58], Next reset 0 [2019-02-18 12:00:00] rlm_sqlcounter: Current Time: 1550488138 [2019-02-18 12:08:58], Prev reset 0 [2019-02-18 12:00:00] # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "sql" from file /etc/freeradius/3.0/mods-enabled/sql rlm_sql_mysql: libmysql version: 10.1.37-MariaDB mysql { tls { } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.23-MariaDB-9+deb9u1, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.23-MariaDB-9+deb9u1, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.23-MariaDB-9+deb9u1, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.23-MariaDB-9+deb9u1, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.23-MariaDB-9+deb9u1, protocol version 10 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Adding client 192.168.1.1 (my-AP-1) to global clients list rlm_sql (192.168.1.1): Client "my-AP-1" (sql) added rlm_sql (sql): Adding client 192.168.1.2 (my-AP-2) to global clients list rlm_sql (192.168.1.2): Client "my-AP-2" (sql) added rlm_sql (sql): Released connection (0) rlm_sql (sql): Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.23-MariaDB-9+deb9u1, protocol version 10 } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server coa { # from file /etc/freeradius/3.0/sites-enabled/coa # Loading recv-coa {...} # Loading send-coa {...} } # server coa server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "coa" virtual_server = "coa" ipaddr = 192.168.1.23 port = 3799 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on coa address 192.168.1.23 port 3799 bound to server coa Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 45765 Listening on proxy address :: port 60911 Ready to process requests (0) Received Access-Request Id 213 from 192.168.1.1:37800 to 192.168.1.23:1812 length 218 (0) User-Name = "vlado" (0) NAS-Identifier = "XXXXXXXXXXXX" (0) Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) NAS-Port = 1 (0) Calling-Station-Id = "YY-YY-YY-YY-YY-YY" (0) Connect-Info = "CONNECT 54Mbps 802.11a" (0) Acct-Session-Id = "AF67C8444C73C070" (0) Acct-Multi-Session-Id = "9D9725C5137C2DEA" (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027073 (0) Framed-MTU = 1400 (0) EAP-Message = 0x02e8000a01766c61646f (0) Message-Authenticator = 0x2e82a80e87c474ff358305ccf90d4269 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy rewrite_calling_station_id { (0) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (0) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (0) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (0) update request { (0) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (0) --> YY-YY-YY-YY-YY-YY (0) &Calling-Station-Id := YY-YY-YY-YY-YY-YY (0) } # update request = noop (0) [updated] = updated (0) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (0) ... skipping else: Preceding "if" was taken (0) } # policy rewrite_calling_station_id = updated (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = updated (0) } # policy filter_username = updated (0) [preprocess] = ok (0) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (0) auth_log: --> /var/log/freeradius/radacct/ 192.168.1.1/auth-detail-20190218 (0) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218 (0) auth_log: EXPAND %t (0) auth_log: --> Mon Feb 18 12:10:05 2019 (0) [auth_log] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "vlado", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 232 length 10 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 233 length 22 (0) eap: EAP session adding &reply:State = 0x72f87ed472117a13 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Sent Access-Challenge Id 213 from 192.168.1.23:1812 to 192.168.1.1:37800 length 0 (0) EAP-Message = 0x01e9001604103568f042ea3ee1fb5c2c64384f4cf9f3 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x72f87ed472117a139eb6154612f031f0 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 214 from 192.168.1.1:37800 to 192.168.1.23:1812 length 232 (1) User-Name = "vlado" (1) NAS-Identifier = "XXXXXXXXXXXX" (1) Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) NAS-Port = 1 (1) Calling-Station-Id = "YY-YY-YY-YY-YY-YY" (1) Connect-Info = "CONNECT 54Mbps 802.11a" (1) Acct-Session-Id = "AF67C8444C73C070" (1) Acct-Multi-Session-Id = "9D9725C5137C2DEA" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027073 (1) Framed-MTU = 1400 (1) EAP-Message = 0x02e900060319 (1) State = 0x72f87ed472117a139eb6154612f031f0 (1) Message-Authenticator = 0xf2ddb60c0cda5cf7a5a46e2d28797d3b (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy rewrite_calling_station_id { (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (1) update request { (1) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (1) --> YY-YY-YY-YY-YY-YY (1) &Calling-Station-Id := YY-YY-YY-YY-YY-YY (1) } # update request = noop (1) [updated] = updated (1) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (1) ... skipping else: Preceding "if" was taken (1) } # policy rewrite_calling_station_id = updated (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = updated (1) } # policy filter_username = updated (1) [preprocess] = ok (1) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (1) auth_log: --> /var/log/freeradius/radacct/ 192.168.1.1/auth-detail-20190218 (1) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218 (1) auth_log: EXPAND %t (1) auth_log: --> Mon Feb 18 12:10:05 2019 (1) [auth_log] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "vlado", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 233 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop (1) sql: EXPAND %{User-Name} (1) sql: --> vlado (1) sql: SQL-User-Name set to 'vlado' rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 67 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 67 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 67 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 67 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (0): Hit idle_timeout, was idle for 67 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (5): Hit idle_timeout, was idle for 67 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): 0 of 0 connections in use. You may need to increase "spare" rlm_sql (sql): Opening additional connection (6), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.23-MariaDB-9+deb9u1, protocol version 10 rlm_sql (sql): Reserved connection (6) (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'vlado' ORDER BY id (1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'vlado' ORDER BY id (1) sql: User found in radcheck table (1) sql: Conditional check items matched, merging assignment check items (1) sql: Cleartext-Password := "hello" (1) sql: Login-Time := "Al0001-2359" (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'vlado' ORDER BY id (1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'vlado' ORDER BY id (1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (1) sql: --> SELECT groupname FROM radusergroup WHERE username = 'vlado' ORDER BY priority (1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'vlado' ORDER BY priority (1) sql: User not found in any groups rlm_sql (sql): Released connection (6) rlm_sql (sql): Need 2 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (7), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.23-MariaDB-9+deb9u1, protocol version 10 (1) [sql] = ok (1) [expiration] = noop (1) logintime: Checking Login-Time (1) logintime: Login within allowed time-slot, 42600 seconds left in this session (1) logintime: reply:Session-Timeout set to 42600 (1) [logintime] = updated (1) dailycounter: WARNING: Couldn't find check attribute, control:Max-Daily-Session, doing nothing... (1) [dailycounter] = noop (1) noresetcounter: WARNING: Couldn't find check attribute, control:Max-All-Session, doing nothing... (1) [noresetcounter] = noop (1) monthlycounter: WARNING: Couldn't find check attribute, control:Max-Monthly-Session, doing nothing... (1) [monthlycounter] = noop (1) expire_on_login: WARNING: Couldn't find check attribute, control:Expire-After, doing nothing... (1) [expire_on_login] = noop (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x72f87ed472117a13 (1) eap: Finished EAP session with state 0x72f87ed472117a13 (1) eap: Previous EAP request found for state 0x72f87ed472117a13, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new EAP-TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 234 length 6 (1) eap: EAP session adding &reply:State = 0x72f87ed473126713 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Sent Access-Challenge Id 214 from 192.168.1.23:1812 to 192.168.1.1:37800 length 0 (1) Session-Timeout = 42600 (1) EAP-Message = 0x01ea00061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x72f87ed4731267139eb6154612f031f0 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 215 from 192.168.1.1:37800 to 192.168.1.23:1812 length 401 (2) User-Name = "vlado" (2) NAS-Identifier = "XXXXXXXXXXXX" (2) Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan" (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) NAS-Port = 1 (2) Calling-Station-Id = "YY-YY-YY-YY-YY-YY" (2) Connect-Info = "CONNECT 54Mbps 802.11a" (2) Acct-Session-Id = "AF67C8444C73C070" (2) Acct-Multi-Session-Id = "9D9725C5137C2DEA" (2) WLAN-Pairwise-Cipher = 1027076 (2) WLAN-Group-Cipher = 1027076 (2) WLAN-AKM-Suite = 1027073 (2) Framed-MTU = 1400 (2) EAP-Message = 0x02ea00af1980000000a516030100a00100009c0303eaa3b599563fcd1ba078d86740a309e828e36d76930515184f300dfce8d92fcb00003ec02cc030009fc02bc02f009ecca9cca8c00ac024c014c0280039006bc009c023c013c02700330067c007c011009d009c0035003d002f003c00050004000a01 (2) State = 0x72f87ed4731267139eb6154612f031f0 (2) Message-Authenticator = 0x119fc3945c0c063c3b00fdae1774d78a (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy rewrite_calling_station_id { (2) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (2) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (2) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (2) update request { (2) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (2) --> YY-YY-YY-YY-YY-YY (2) &Calling-Station-Id := YY-YY-YY-YY-YY-YY (2) } # update request = noop (2) [updated] = updated (2) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (2) ... skipping else: Preceding "if" was taken (2) } # policy rewrite_calling_station_id = updated (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = updated (2) } # policy filter_username = updated (2) [preprocess] = ok (2) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (2) auth_log: --> /var/log/freeradius/radacct/ 192.168.1.1/auth-detail-20190218 (2) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218 (2) auth_log: EXPAND %t (2) auth_log: --> Mon Feb 18 12:10:05 2019 (2) [auth_log] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "vlado", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 234 length 175 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x72f87ed473126713 (2) eap: Finished EAP session with state 0x72f87ed473126713 (2) eap: Previous EAP request found for state 0x72f87ed473126713, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 165 bytes (2) eap_peap: Got complete TLS record (165 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before SSL initialization (2) eap_peap: TLS_accept: before SSL initialization (2) eap_peap: TLS_accept: before SSL initialization (2) eap_peap: <<< recv TLS 1.2 [length 00a0] (2) eap_peap: TLS_accept: SSLv3/TLS read client hello (2) eap_peap: >>> send TLS 1.2 [length 003d] (2) eap_peap: TLS_accept: SSLv3/TLS write server hello (2) eap_peap: >>> send TLS 1.2 [length 02d9] (2) eap_peap: TLS_accept: SSLv3/TLS write certificate (2) eap_peap: >>> send TLS 1.2 [length 014d] (2) eap_peap: TLS_accept: SSLv3/TLS write key exchange (2) eap_peap: >>> send TLS 1.2 [length 0004] (2) eap_peap: TLS_accept: SSLv3/TLS write server done (2) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (2) eap_peap: In SSL Handshake Phase (2) eap_peap: In SSL Accept mode (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 235 length 1004 (2) eap: EAP session adding &reply:State = 0x72f87ed470136713 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Sent Access-Challenge Id 215 from 192.168.1.23:1812 to 192.168.1.1:37800 length 0 (2) EAP-Message = 0x01eb03ec19c00000047b160303003d0200003903038a4f2b5bcf454e0f1ca23649b4b63a6867795d2cd2b550117338a7d2ed231fd400c030000011ff01000100000b0004030001020017000016030302d90b0002d50002d20002cf308202cb308201b3a003020102020900d563010a5c094c7a300d0609 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x72f87ed4701367139eb6154612f031f0 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 216 from 192.168.1.1:37800 to 192.168.1.23:1812 length 232 (3) User-Name = "vlado" (3) NAS-Identifier = "XXXXXXXXXXXX" (3) Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan" (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) NAS-Port = 1 (3) Calling-Station-Id = "YY-YY-YY-YY-YY-YY" (3) Connect-Info = "CONNECT 54Mbps 802.11a" (3) Acct-Session-Id = "AF67C8444C73C070" (3) Acct-Multi-Session-Id = "9D9725C5137C2DEA" (3) WLAN-Pairwise-Cipher = 1027076 (3) WLAN-Group-Cipher = 1027076 (3) WLAN-AKM-Suite = 1027073 (3) Framed-MTU = 1400 (3) EAP-Message = 0x02eb00061900 (3) State = 0x72f87ed4701367139eb6154612f031f0 (3) Message-Authenticator = 0xe988e5e3b0eecd7634d90c8ce3cc53f0 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy rewrite_calling_station_id { (3) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (3) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (3) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (3) update request { (3) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (3) --> YY-YY-YY-YY-YY-YY (3) &Calling-Station-Id := YY-YY-YY-YY-YY-YY (3) } # update request = noop (3) [updated] = updated (3) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (3) ... skipping else: Preceding "if" was taken (3) } # policy rewrite_calling_station_id = updated (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = updated (3) } # policy filter_username = updated (3) [preprocess] = ok (3) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (3) auth_log: --> /var/log/freeradius/radacct/ 192.168.1.1/auth-detail-20190218 (3) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218 (3) auth_log: EXPAND %t (3) auth_log: --> Mon Feb 18 12:10:05 2019 (3) [auth_log] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "vlado", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 235 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x72f87ed470136713 (3) eap: Finished EAP session with state 0x72f87ed470136713 (3) eap: Previous EAP request found for state 0x72f87ed470136713, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 236 length 159 (3) eap: EAP session adding &reply:State = 0x72f87ed471146713 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Sent Access-Challenge Id 216 from 192.168.1.23:1812 to 192.168.1.1:37800 length 0 (3) EAP-Message = 0x01ec009f1900115390b7e7dd47f66d3ae488019fc8804d0399d9e67a12b95d8f0bd2d25e776416884eacacc12637275a5efd123651cd92cce732752b76e1f2752d72a7e2598d1e626bef5e8eb96d8003db7653c3d57aab18ece54cdf092ed03f0822fa5bcb0e13516423f6d4e27766d97d5a05711d4ca4 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x72f87ed4711467139eb6154612f031f0 (3) Finished request Waking up in 4.8 seconds. (4) Received Access-Request Id 217 from 192.168.1.1:37800 to 192.168.1.23:1812 length 362 (4) User-Name = "vlado" (4) NAS-Identifier = "XXXXXXXXXXXX" (4) Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan" (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) NAS-Port = 1 (4) Calling-Station-Id = "YY-YY-YY-YY-YY-YY" (4) Connect-Info = "CONNECT 54Mbps 802.11a" (4) Acct-Session-Id = "AF67C8444C73C070" (4) Acct-Multi-Session-Id = "9D9725C5137C2DEA" (4) WLAN-Pairwise-Cipher = 1027076 (4) WLAN-Group-Cipher = 1027076 (4) WLAN-AKM-Suite = 1027073 (4) Framed-MTU = 1400 (4) EAP-Message = 0x02ec008819800000007e160303004610000042410489751519213749814a2f16a22ddf7c3871bef4c8a04849de481447fdb0f27e984de8f161d520398b6ac123778797919a08b1265e29ce50a9489c17896b08e2041403030001011603030028000000000000000025b4e5927cab6acbd7df7d0ddbeec2 (4) State = 0x72f87ed4711467139eb6154612f031f0 (4) Message-Authenticator = 0x214c0b000ffde962cde065d3d29cedcf (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy rewrite_calling_station_id { (4) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (4) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (4) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (4) update request { (4) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (4) --> YY-YY-YY-YY-YY-YY (4) &Calling-Station-Id := YY-YY-YY-YY-YY-YY (4) } # update request = noop (4) [updated] = updated (4) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (4) ... skipping else: Preceding "if" was taken (4) } # policy rewrite_calling_station_id = updated (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = updated (4) } # policy filter_username = updated (4) [preprocess] = ok (4) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (4) auth_log: --> /var/log/freeradius/radacct/ 192.168.1.1/auth-detail-20190218 (4) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218 (4) auth_log: EXPAND %t (4) auth_log: --> Mon Feb 18 12:10:05 2019 (4) [auth_log] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "vlado", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 236 length 136 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x72f87ed471146713 (4) eap: Finished EAP session with state 0x72f87ed471146713 (4) eap: Previous EAP request found for state 0x72f87ed471146713, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer indicated complete TLS record size will be 126 bytes (4) eap_peap: Got complete TLS record (126 bytes) (4) eap_peap: [eaptls verify] = length included (4) eap_peap: TLS_accept: SSLv3/TLS write server done (4) eap_peap: <<< recv TLS 1.2 [length 0046] (4) eap_peap: TLS_accept: SSLv3/TLS read client key exchange (4) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec (4) eap_peap: <<< recv TLS 1.2 [length 0010] (4) eap_peap: TLS_accept: SSLv3/TLS read finished (4) eap_peap: >>> send TLS 1.2 [length 0001] (4) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec (4) eap_peap: >>> send TLS 1.2 [length 0010] (4) eap_peap: TLS_accept: SSLv3/TLS write finished (4) eap_peap: (other): SSL negotiation finished successfully (4) eap_peap: SSL Connection Established (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 237 length 57 (4) eap: EAP session adding &reply:State = 0x72f87ed476156713 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Sent Access-Challenge Id 217 from 192.168.1.23:1812 to 192.168.1.1:37800 length 0 (4) EAP-Message = 0x01ed003919001403030001011603030028eb7c72f8ba2aae832999f4aad001fe694c41561ea194a9204a4cbb6845c0430bf618ff325a567172 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x72f87ed4761567139eb6154612f031f0 (4) Finished request Waking up in 4.8 seconds. (5) Received Access-Request Id 218 from 192.168.1.1:37800 to 192.168.1.23:1812 length 232 (5) User-Name = "vlado" (5) NAS-Identifier = "XXXXXXXXXXXX" (5) Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan" (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) NAS-Port = 1 (5) Calling-Station-Id = "YY-YY-YY-YY-YY-YY" (5) Connect-Info = "CONNECT 54Mbps 802.11a" (5) Acct-Session-Id = "AF67C8444C73C070" (5) Acct-Multi-Session-Id = "9D9725C5137C2DEA" (5) WLAN-Pairwise-Cipher = 1027076 (5) WLAN-Group-Cipher = 1027076 (5) WLAN-AKM-Suite = 1027073 (5) Framed-MTU = 1400 (5) EAP-Message = 0x02ed00061900 (5) State = 0x72f87ed4761567139eb6154612f031f0 (5) Message-Authenticator = 0xa5c1466d0dfd1aec8355ddf82ff8f2fc (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy rewrite_calling_station_id { (5) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (5) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (5) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (5) update request { (5) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (5) --> YY-YY-YY-YY-YY-YY (5) &Calling-Station-Id := YY-YY-YY-YY-YY-YY (5) } # update request = noop (5) [updated] = updated (5) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (5) ... skipping else: Preceding "if" was taken (5) } # policy rewrite_calling_station_id = updated (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = updated (5) } # policy filter_username = updated (5) [preprocess] = ok (5) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (5) auth_log: --> /var/log/freeradius/radacct/ 192.168.1.1/auth-detail-20190218 (5) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218 (5) auth_log: EXPAND %t (5) auth_log: --> Mon Feb 18 12:10:06 2019 (5) [auth_log] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "vlado", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 237 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x72f87ed476156713 (5) eap: Finished EAP session with state 0x72f87ed476156713 (5) eap: Previous EAP request found for state 0x72f87ed476156713, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer ACKed our handshake fragment. handshake is finished (5) eap_peap: [eaptls verify] = success (5) eap_peap: [eaptls process] = success (5) eap_peap: Session established. Decoding tunneled attributes (5) eap_peap: PEAP state TUNNEL ESTABLISHED (5) eap: Sending EAP Request (code 1) ID 238 length 40 (5) eap: EAP session adding &reply:State = 0x72f87ed477166713 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Sent Access-Challenge Id 218 from 192.168.1.23:1812 to 192.168.1.1:37800 length 0 (5) EAP-Message = 0x01ee00281900170303001deb7c72f8ba2aae84b6857b3fe93ac82aebfddad9f4d723a24c8c8a6e5b (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x72f87ed4771667139eb6154612f031f0 (5) Finished request Waking up in 4.8 seconds. (6) Received Access-Request Id 219 from 192.168.1.1:37800 to 192.168.1.23:1812 length 267 (6) User-Name = "vlado" (6) NAS-Identifier = "XXXXXXXXXXXX" (6) Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan" (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) NAS-Port = 1 (6) Calling-Station-Id = "YY-YY-YY-YY-YY-YY" (6) Connect-Info = "CONNECT 54Mbps 802.11a" (6) Acct-Session-Id = "AF67C8444C73C070" (6) Acct-Multi-Session-Id = "9D9725C5137C2DEA" (6) WLAN-Pairwise-Cipher = 1027076 (6) WLAN-Group-Cipher = 1027076 (6) WLAN-AKM-Suite = 1027073 (6) Framed-MTU = 1400 (6) EAP-Message = 0x02ee00291900170303001e0000000000000001021f0a8a3e9d82a7a9a7cc04a61e347203063c9c8532 (6) State = 0x72f87ed4771667139eb6154612f031f0 (6) Message-Authenticator = 0x3c723707d01681afd13962685f819bbf (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy rewrite_calling_station_id { (6) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (6) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (6) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (6) update request { (6) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (6) --> YY-YY-YY-YY-YY-YY (6) &Calling-Station-Id := YY-YY-YY-YY-YY-YY (6) } # update request = noop (6) [updated] = updated (6) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (6) ... skipping else: Preceding "if" was taken (6) } # policy rewrite_calling_station_id = updated (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = updated (6) } # policy filter_username = updated (6) [preprocess] = ok (6) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (6) auth_log: --> /var/log/freeradius/radacct/ 192.168.1.1/auth-detail-20190218 (6) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218 (6) auth_log: EXPAND %t (6) auth_log: --> Mon Feb 18 12:10:06 2019 (6) [auth_log] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "vlado", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 238 length 41 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x72f87ed477166713 (6) eap: Finished EAP session with state 0x72f87ed477166713 (6) eap: Previous EAP request found for state 0x72f87ed477166713, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: [eaptls verify] = ok (6) eap_peap: Done initial handshake (6) eap_peap: [eaptls process] = ok (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state WAITING FOR INNER IDENTITY (6) eap_peap: Identity - vlado (6) eap_peap: Got inner identity 'vlado' (6) eap_peap: Setting default EAP type for tunneled EAP session (6) eap_peap: Got tunneled request (6) eap_peap: EAP-Message = 0x02ee000a01766c61646f (6) eap_peap: Setting User-Name to vlado (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap: EAP-Message = 0x02ee000a01766c61646f (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap: User-Name = "vlado" (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x02ee000a01766c61646f (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "vlado" (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "vlado", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 238 length 10 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: Issuing Challenge (6) eap: Sending EAP Request (code 1) ID 239 length 43 (6) eap: EAP session adding &reply:State = 0x3bd67c043b3966c8 (6) [eap] = handled (6) } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x01ef002b1a01ef0026104d904cab80ac28f62451ea36b597f8f3667265657261646975732d332e302e3132 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x3bd67c043b3966c8d43c1189a979d5ee (6) eap_peap: Got tunneled reply code 11 (6) eap_peap: EAP-Message = 0x01ef002b1a01ef0026104d904cab80ac28f62451ea36b597f8f3667265657261646975732d332e302e3132 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x3bd67c043b3966c8d43c1189a979d5ee (6) eap_peap: Got tunneled reply RADIUS code 11 (6) eap_peap: EAP-Message = 0x01ef002b1a01ef0026104d904cab80ac28f62451ea36b597f8f3667265657261646975732d332e302e3132 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x3bd67c043b3966c8d43c1189a979d5ee (6) eap_peap: Got tunneled Access-Challenge (6) eap: Sending EAP Request (code 1) ID 239 length 74 (6) eap: EAP session adding &reply:State = 0x72f87ed474176713 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Sent Access-Challenge Id 219 from 192.168.1.23:1812 to 192.168.1.1:37800 length 0 (6) EAP-Message = 0x01ef004a1900170303003feb7c72f8ba2aae85077f98646809c57a9697c57afa697aa5cb19515426259aaf4705857b46b19f8c8c600d65c9bc37bec32c93463b24d826dc7b15bacbda80 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x72f87ed4741767139eb6154612f031f0 (6) Finished request Waking up in 4.8 seconds. (7) Received Access-Request Id 220 from 192.168.1.1:37800 to 192.168.1.23:1812 length 321 (7) User-Name = "vlado" (7) NAS-Identifier = "XXXXXXXXXXXX" (7) Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan" (7) NAS-Port-Type = Wireless-802.11 (7) Service-Type = Framed-User (7) NAS-Port = 1 (7) Calling-Station-Id = "YY-YY-YY-YY-YY-YY" (7) Connect-Info = "CONNECT 54Mbps 802.11a" (7) Acct-Session-Id = "AF67C8444C73C070" (7) Acct-Multi-Session-Id = "9D9725C5137C2DEA" (7) WLAN-Pairwise-Cipher = 1027076 (7) WLAN-Group-Cipher = 1027076 (7) WLAN-AKM-Suite = 1027073 (7) Framed-MTU = 1400 (7) EAP-Message = 0x02ef005f1900170303005400000000000000028d049eddc5bfe9aa9436e98e0c614313c43b433824efb840dc6b717e2392bad8fd494e3d6a1744be4803e9c04853db884927d60e0dc3250825680eadb7623a9f829f0e41d1e8dcd02ad55bff (7) State = 0x72f87ed4741767139eb6154612f031f0 (7) Message-Authenticator = 0xd87793640ca96c6d3fdbd1654c4e7f03 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy rewrite_calling_station_id { (7) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (7) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (7) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (7) update request { (7) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (7) --> YY-YY-YY-YY-YY-YY (7) &Calling-Station-Id := YY-YY-YY-YY-YY-YY (7) } # update request = noop (7) [updated] = updated (7) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (7) ... skipping else: Preceding "if" was taken (7) } # policy rewrite_calling_station_id = updated (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = updated (7) } # policy filter_username = updated (7) [preprocess] = ok (7) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (7) auth_log: --> /var/log/freeradius/radacct/ 192.168.1.1/auth-detail-20190218 (7) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218 (7) auth_log: EXPAND %t (7) auth_log: --> Mon Feb 18 12:10:06 2019 (7) [auth_log] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "vlado", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 239 length 95 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x3bd67c043b3966c8 (7) eap: Finished EAP session with state 0x72f87ed474176713 (7) eap: Previous EAP request found for state 0x72f87ed474176713, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state phase2 (7) eap_peap: EAP method MSCHAPv2 (26) (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x02ef00401a02ef003b31d51e1cb57b23c4b8dcd7a4c2d336d68c000000000000000045293309e47d63ab7c4d563bf90ea80c909b91a52357760f00766c61646f (7) eap_peap: Setting User-Name to vlado (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x02ef00401a02ef003b31d51e1cb57b23c4b8dcd7a4c2d336d68c000000000000000045293309e47d63ab7c4d563bf90ea80c909b91a52357760f00766c61646f (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "vlado" (7) eap_peap: State = 0x3bd67c043b3966c8d43c1189a979d5ee (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x02ef00401a02ef003b31d51e1cb57b23c4b8dcd7a4c2d336d68c000000000000000045293309e47d63ab7c4d563bf90ea80c909b91a52357760f00766c61646f (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "vlado" (7) State = 0x3bd67c043b3966c8d43c1189a979d5ee (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "vlado", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 239 length 64 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) [files] = noop (7) sql: EXPAND %{User-Name} (7) sql: --> vlado (7) sql: SQL-User-Name set to 'vlado' rlm_sql (sql): Reserved connection (6) (7) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (7) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'vlado' ORDER BY id (7) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'vlado' ORDER BY id (7) sql: User found in radcheck table (7) sql: Conditional check items matched, merging assignment check items (7) sql: Cleartext-Password := "hello" (7) sql: Login-Time := "Al0001-2359" (7) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (7) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'vlado' ORDER BY id (7) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'vlado' ORDER BY id (7) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (7) sql: --> SELECT groupname FROM radusergroup WHERE username = 'vlado' ORDER BY priority (7) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'vlado' ORDER BY priority (7) sql: User not found in any groups rlm_sql (sql): Released connection (6) rlm_sql (sql): Need 1 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (8), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.23-MariaDB-9+deb9u1, protocol version 10 (7) [sql] = ok (7) [expiration] = noop (7) logintime: Checking Login-Time (7) logintime: Login within allowed time-slot, 42600 seconds left in this session (7) logintime: reply:Session-Timeout set to 42600 (7) [logintime] = updated (7) pap: WARNING: Auth-Type already set. Not setting to PAP (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0x3bd67c043b3966c8 (7) eap: Finished EAP session with state 0x3bd67c043b3966c8 (7) eap: Previous EAP request found for state 0x3bd67c043b3966c8, released from the list (7) eap: Peer sent packet with method EAP MSCHAPv2 (26) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) eap_mschapv2: authenticate { (7) mschap: Found Cleartext-Password, hashing to create NT-Password (7) mschap: Found Cleartext-Password, hashing to create LM-Password (7) mschap: Creating challenge hash with username: vlado (7) mschap: Client is using MS-CHAPv2 (7) mschap: Adding MS-CHAPv2 MPPE keys (7) [mschap] = ok (7) } # authenticate = ok (7) MSCHAP Success (7) eap: Sending EAP Request (code 1) ID 240 length 51 (7) eap: EAP session adding &reply:State = 0x3bd67c043a2666c8 (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) Session-Timeout = 42600 (7) EAP-Message = 0x01f000331a03ef002e533d38303836333636353137314341453543343245353533374632314344434632423645433743304633 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x3bd67c043a2666c8d43c1189a979d5ee (7) eap_peap: Got tunneled reply code 11 (7) eap_peap: Session-Timeout = 42600 (7) eap_peap: EAP-Message = 0x01f000331a03ef002e533d38303836333636353137314341453543343245353533374632314344434632423645433743304633 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x3bd67c043a2666c8d43c1189a979d5ee (7) eap_peap: Got tunneled reply RADIUS code 11 (7) eap_peap: Session-Timeout = 42600 (7) eap_peap: EAP-Message = 0x01f000331a03ef002e533d38303836333636353137314341453543343245353533374632314344434632423645433743304633 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x3bd67c043a2666c8d43c1189a979d5ee (7) eap_peap: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 240 length 82 (7) eap: EAP session adding &reply:State = 0x72f87ed475086713 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Sent Access-Challenge Id 220 from 192.168.1.23:1812 to 192.168.1.1:37800 length 0 (7) EAP-Message = 0x01f0005219001703030047eb7c72f8ba2aae866a83d0fa93f2378d63353a141e589443a711b2794e7263e31b69803529d7b248b2c2e4bded94fe49207d5c60242410f6627264e8075d0e62cea60b25b3d22d (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x72f87ed4750867139eb6154612f031f0 (7) Finished request Waking up in 4.8 seconds. (8) Received Access-Request Id 221 from 192.168.1.1:37800 to 192.168.1.23:1812 length 263 (8) User-Name = "vlado" (8) NAS-Identifier = "XXXXXXXXXXXX" (8) Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan" (8) NAS-Port-Type = Wireless-802.11 (8) Service-Type = Framed-User (8) NAS-Port = 1 (8) Calling-Station-Id = "YY-YY-YY-YY-YY-YY" (8) Connect-Info = "CONNECT 54Mbps 802.11a" (8) Acct-Session-Id = "AF67C8444C73C070" (8) Acct-Multi-Session-Id = "9D9725C5137C2DEA" (8) WLAN-Pairwise-Cipher = 1027076 (8) WLAN-Group-Cipher = 1027076 (8) WLAN-AKM-Suite = 1027073 (8) Framed-MTU = 1400 (8) EAP-Message = 0x02f000251900170303001a0000000000000003cab6ab01244543305634c416d37f3169210c (8) State = 0x72f87ed4750867139eb6154612f031f0 (8) Message-Authenticator = 0x1595b52859659cf42bb39801bb18b306 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) policy rewrite_calling_station_id { (8) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (8) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (8) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (8) update request { (8) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (8) --> YY-YY-YY-YY-YY-YY (8) &Calling-Station-Id := YY-YY-YY-YY-YY-YY (8) } # update request = noop (8) [updated] = updated (8) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (8) ... skipping else: Preceding "if" was taken (8) } # policy rewrite_calling_station_id = updated (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = updated (8) } # policy filter_username = updated (8) [preprocess] = ok (8) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (8) auth_log: --> /var/log/freeradius/radacct/ 192.168.1.1/auth-detail-20190218 (8) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218 (8) auth_log: EXPAND %t (8) auth_log: --> Mon Feb 18 12:10:06 2019 (8) [auth_log] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "vlado", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 240 length 37 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x3bd67c043a2666c8 (8) eap: Finished EAP session with state 0x72f87ed475086713 (8) eap: Previous EAP request found for state 0x72f87ed475086713, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x02f000061a03 (8) eap_peap: Setting User-Name to vlado (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x02f000061a03 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "vlado" (8) eap_peap: State = 0x3bd67c043a2666c8d43c1189a979d5ee (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x02f000061a03 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "vlado" (8) State = 0x3bd67c043a2666c8d43c1189a979d5ee (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "vlado", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 240 length 6 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) [files] = noop (8) sql: EXPAND %{User-Name} (8) sql: --> vlado (8) sql: SQL-User-Name set to 'vlado' rlm_sql (sql): Reserved connection (7) (8) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (8) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'vlado' ORDER BY id (8) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'vlado' ORDER BY id (8) sql: User found in radcheck table (8) sql: Conditional check items matched, merging assignment check items (8) sql: Cleartext-Password := "hello" (8) sql: Login-Time := "Al0001-2359" (8) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (8) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'vlado' ORDER BY id (8) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'vlado' ORDER BY id (8) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (8) sql: --> SELECT groupname FROM radusergroup WHERE username = 'vlado' ORDER BY priority (8) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'vlado' ORDER BY priority (8) sql: User not found in any groups rlm_sql (sql): Released connection (7) (8) [sql] = ok (8) [expiration] = noop (8) logintime: Checking Login-Time (8) logintime: Login within allowed time-slot, 42600 seconds left in this session (8) logintime: reply:Session-Timeout set to 42600 (8) [logintime] = updated (8) pap: WARNING: Auth-Type already set. Not setting to PAP (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0x3bd67c043a2666c8 (8) eap: Finished EAP session with state 0x3bd67c043a2666c8 (8) eap: Previous EAP request found for state 0x3bd67c043a2666c8, released from the list (8) eap: Peer sent packet with method EAP MSCHAPv2 (26) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap: Sending EAP Success (code 3) ID 240 length 4 (8) eap: Freeing handler (8) [eap] = ok (8) } # authenticate = ok (8) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) post-auth { (8) sql: EXPAND .query (8) sql: --> .query (8) sql: Using query template 'query' rlm_sql (sql): Reserved connection (6) (8) sql: EXPAND %{User-Name} (8) sql: --> vlado (8) sql: SQL-User-Name set to 'vlado' (8) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (8) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'vlado', '', 'Access-Accept', '2019-02-18 12:10:06') (8) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'vlado', '', 'Access-Accept', '2019-02-18 12:10:06') (8) sql: SQL query returned: success (8) sql: 1 record(s) updated rlm_sql (sql): Released connection (6) (8) [sql] = ok (8) } # post-auth = ok (8) Login OK: [vlado] (from client my-AP-1 port 0 via TLS tunnel) (8) } # server inner-tunnel (8) Virtual server sending reply (8) Session-Timeout = 42600 (8) MS-MPPE-Encryption-Policy = Encryption-Allowed (8) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (8) MS-MPPE-Send-Key = 0x4b4c5c28145d2c0c352925052fae8e58 (8) MS-MPPE-Recv-Key = 0x8b6f27381adac6e182a0f2443409f8e3 (8) EAP-Message = 0x03f00004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) User-Name = "vlado" (8) eap_peap: Got tunneled reply code 2 (8) eap_peap: Session-Timeout = 42600 (8) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (8) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (8) eap_peap: MS-MPPE-Send-Key = 0x4b4c5c28145d2c0c352925052fae8e58 (8) eap_peap: MS-MPPE-Recv-Key = 0x8b6f27381adac6e182a0f2443409f8e3 (8) eap_peap: EAP-Message = 0x03f00004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: User-Name = "vlado" (8) eap_peap: Got tunneled reply RADIUS code 2 (8) eap_peap: Session-Timeout = 42600 (8) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (8) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (8) eap_peap: MS-MPPE-Send-Key = 0x4b4c5c28145d2c0c352925052fae8e58 (8) eap_peap: MS-MPPE-Recv-Key = 0x8b6f27381adac6e182a0f2443409f8e3 (8) eap_peap: EAP-Message = 0x03f00004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: User-Name = "vlado" (8) eap_peap: Tunneled authentication was successful (8) eap_peap: SUCCESS (8) eap: Sending EAP Request (code 1) ID 241 length 46 (8) eap: EAP session adding &reply:State = 0x72f87ed47a096713 (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) Post-Auth-Type sub-section not found. Ignoring. (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) Sent Access-Challenge Id 221 from 192.168.1.23:1812 to 192.168.1.1:37800 length 0 (8) EAP-Message = 0x01f1002e19001703030023eb7c72f8ba2aae873af124abd0268e66b7f7d25a991fc6b05ce735dcf9281cd986dd6c (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x72f87ed47a0967139eb6154612f031f0 (8) Finished request Waking up in 4.6 seconds. (9) Received Access-Request Id 222 from 192.168.1.1:37800 to 192.168.1.23:1812 length 272 (9) User-Name = "vlado" (9) NAS-Identifier = "XXXXXXXXXXXX" (9) Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan" (9) NAS-Port-Type = Wireless-802.11 (9) Service-Type = Framed-User (9) NAS-Port = 1 (9) Calling-Station-Id = "YY-YY-YY-YY-YY-YY" (9) Connect-Info = "CONNECT 54Mbps 802.11a" (9) Acct-Session-Id = "AF67C8444C73C070" (9) Acct-Multi-Session-Id = "9D9725C5137C2DEA" (9) WLAN-Pairwise-Cipher = 1027076 (9) WLAN-Group-Cipher = 1027076 (9) WLAN-AKM-Suite = 1027073 (9) Framed-MTU = 1400 (9) EAP-Message = 0x02f1002e1900170303002300000000000000048bb4f4aa5383a62b4232fb260abbd5022e8347be791dfe4220a954 (9) State = 0x72f87ed47a0967139eb6154612f031f0 (9) Message-Authenticator = 0x782d212c869d290bc286fe1df482eaa2 (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (9) authorize { (9) policy rewrite_calling_station_id { (9) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (9) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (9) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (9) update request { (9) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (9) --> YY-YY-YY-YY-YY-YY (9) &Calling-Station-Id := YY-YY-YY-YY-YY-YY (9) } # update request = noop (9) [updated] = updated (9) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (9) ... skipping else: Preceding "if" was taken (9) } # policy rewrite_calling_station_id = updated (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = updated (9) } # policy filter_username = updated (9) [preprocess] = ok (9) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (9) auth_log: --> /var/log/freeradius/radacct/ 192.168.1.1/auth-detail-20190218 (9) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.1.1/auth-detail-20190218 (9) auth_log: EXPAND %t (9) auth_log: --> Mon Feb 18 12:10:06 2019 (9) [auth_log] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "vlado", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 241 length 46 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x72f87ed47a096713 (9) eap: Finished EAP session with state 0x72f87ed47a096713 (9) eap: Previous EAP request found for state 0x72f87ed47a096713, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state send tlv success (9) eap_peap: Received EAP-TLV response (9) eap_peap: Success (9) eap: Sending EAP Success (code 3) ID 241 length 4 (9) eap: Freeing handler (9) [eap] = ok (9) } # authenticate = ok (9) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (9) post-auth { (9) update { (9) No attributes updated (9) } # update = noop (9) sql: EXPAND .query (9) sql: --> .query (9) sql: Using query template 'query' rlm_sql (sql): Reserved connection (8) (9) sql: EXPAND %{User-Name} (9) sql: --> vlado (9) sql: SQL-User-Name set to 'vlado' (9) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (9) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'vlado', '', 'Access-Accept', '2019-02-18 12:10:06') (9) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'vlado', '', 'Access-Accept', '2019-02-18 12:10:06') (9) sql: SQL query returned: success (9) sql: 1 record(s) updated rlm_sql (sql): Released connection (8) (9) [sql] = ok (9) [exec] = noop (9) policy remove_reply_message_if_eap { (9) if (&reply:EAP-Message && &reply:Reply-Message) { (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (9) else { (9) [noop] = noop (9) } # else = noop (9) } # policy remove_reply_message_if_eap = noop (9) } # post-auth = ok (9) Login OK: [vlado] (from client my-AP-1 port 1 cli YY-YY-YY-YY-YY-YY) (9) Sent Access-Accept Id 222 from 192.168.1.23:1812 to 192.168.1.1:37800 length 0 (9) MS-MPPE-Recv-Key = 0x5ba56ee87c023d7231c36407b21c91ec1843f056290992c28508022a9a9e64fa (9) MS-MPPE-Send-Key = 0x97ba68564e7dc0a5084ba5105d74d53b46b0ca2a67da15641f7c872b8aec6565 (9) EAP-Message = 0x03f10004 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) User-Name = "vlado" (9) Finished request Waking up in 4.6 seconds. (10) Received Accounting-Request Id 223 from 192.168.1.1:43128 to 192.168.1.23:1813 length 206 (10) Acct-Status-Type = Start (10) Acct-Authentic = RADIUS (10) User-Name = "vlado" (10) NAS-Identifier = "XXXXXXXXXXXX" (10) Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan" (10) NAS-Port-Type = Wireless-802.11 (10) Service-Type = Framed-User (10) NAS-Port = 1 (10) Calling-Station-Id = "YY-YY-YY-YY-YY-YY" (10) Connect-Info = "CONNECT 54Mbps 802.11a" (10) Acct-Session-Id = "AF67C8444C73C070" (10) Acct-Multi-Session-Id = "9D9725C5137C2DEA" (10) WLAN-Pairwise-Cipher = 1027076 (10) WLAN-Group-Cipher = 1027076 (10) WLAN-AKM-Suite = 1027073 (10) Event-Timestamp = "Feb 18 2019 12:10:06 CET" (10) Acct-Delay-Time = 0 (10) # Executing section preacct from file /etc/freeradius/3.0/sites-enabled/default (10) preacct { (10) policy rewrite_calling_station_id { (10) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (10) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (10) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (10) update request { (10) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (10) --> YY-YY-YY-YY-YY-YY (10) &Calling-Station-Id := YY-YY-YY-YY-YY-YY (10) } # update request = noop (10) [updated] = updated (10) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (10) ... skipping else: Preceding "if" was taken (10) } # policy rewrite_calling_station_id = updated (10) [preprocess] = ok (10) policy acct_unique { (10) update request { (10) &Tmp-String-9 := "ai:" (10) } # update request = noop (10) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (10) EXPAND %{hex:&Class} (10) --> (10) EXPAND ^%{hex:&Tmp-String-9} (10) --> ^61693a (10) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (10) else { (10) update request { (10) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (10) --> a2134571c07be7a11c77ce01067a80b5 (10) &Acct-Unique-Session-Id := a2134571c07be7a11c77ce01067a80b5 (10) } # update request = noop (10) } # else = noop (10) } # policy acct_unique = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "vlado", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) [files] = noop (10) } # preacct = updated (10) # Executing section accounting from file /etc/freeradius/3.0/sites-enabled/default (10) accounting { (10) detail: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d (10) detail: --> /var/log/freeradius/radacct/192.168.1.1/detail-20190218 (10) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.1.1/detail-20190218 (10) detail: EXPAND %t (10) detail: --> Mon Feb 18 12:10:06 2019 (10) [detail] = ok (10) [unix] = ok (10) sradutmp: EXPAND /var/log/freeradius/sradutmp (10) sradutmp: --> /var/log/freeradius/sradutmp (10) sradutmp: EXPAND %{User-Name} (10) sradutmp: --> vlado (10) [sradutmp] = ok (10) sql: EXPAND %{tolower:type.%{Acct-Status-Type}.query} (10) sql: --> type.start.query (10) sql: Using query template 'query' rlm_sql (sql): Reserved connection (7) (10) sql: EXPAND %{User-Name} (10) sql: --> vlado (10) sql: SQL-User-Name set to 'vlado' (10) sql: EXPAND INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}') (10) sql: --> INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('AF67C8444C73C070', 'a2134571c07be7a11c77ce01067a80b5', 'vlado', '', '192.168.1.1', '1', 'Wireless-802.11', FROM_UNIXTIME(1550488206), FROM_UNIXTIME(1550488206), NULL, '0', 'RADIUS', 'CONNECT 54Mbps 802.11a', '', '0', '0', 'XX-XX-XX-XX-XX-XX:5GWlan', 'YY-YY-YY-YY-YY-YY', '', 'Framed-User', '', '') (10) sql: Executing query: INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('AF67C8444C73C070', 'a2134571c07be7a11c77ce01067a80b5', 'vlado', '', '192.168.1.1', '1', 'Wireless-802.11', FROM_UNIXTIME(1550488206), FROM_UNIXTIME(1550488206), NULL, '0', 'RADIUS', 'CONNECT 54Mbps 802.11a', '', '0', '0', 'XX-XX-XX-XX-XX-XX:5GWlan', 'YY-YY-YY-YY-YY-YY', '', 'Framed-User', '', '') (10) sql: SQL query returned: success (10) sql: 1 record(s) updated rlm_sql (sql): Released connection (7) (10) [sql] = ok (10) if ( "%{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct where UserName='%{User-Name}'}" > "%{sql: SELECT value from radcheck where username='%{User-Name}' and attribute='Max-Daily-Session'}" ) { (10) EXPAND %{User-Name} (10) --> vlado (10) SQL-User-Name set to 'vlado' rlm_sql (sql): Reserved connection (6) (10) Executing select query: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct where UserName='vlado' rlm_sql (sql): Released connection (6) (10) EXPAND %{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct where UserName='%{User-Name}'} (10) --> 0 (10) EXPAND %{User-Name} (10) --> vlado (10) SQL-User-Name set to 'vlado' rlm_sql (sql): Reserved connection (8) (10) Executing select query: SELECT value from radcheck where username='vlado' and attribute='Max-Daily-Session' (10) SQL query returned no results rlm_sql (sql): Released connection (8) (10) EXPAND %{sql: SELECT value from radcheck where username='%{User-Name}' and attribute='Max-Daily-Session'} (10) --> (10) if ( "%{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct where UserName='%{User-Name}'}" > "%{sql: SELECT value from radcheck where username='%{User-Name}' and attribute='Max-Daily-Session'}" ) -> TRUE (10) if ( "%{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct where UserName='%{User-Name}'}" > "%{sql: SELECT value from radcheck where username='%{User-Name}' and attribute='Max-Daily-Session'}" ) { (10) update disconnect { (10) EXPAND %{Acct-Session-Id} (10) --> AF67C8444C73C070 (10) &Acct-Session-Id = AF67C8444C73C070 (10) EXPAND %{User-Name} (10) --> vlado (10) &User-Name = vlado (10) EXPAND %{Calling-Station-Id} (10) --> YY-YY-YY-YY-YY-YY (10) &Calling-Station-Id = YY-YY-YY-YY-YY-YY (10) } # update disconnect = noop (10) } # if ( "%{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct where UserName='%{User-Name}'}" > "%{sql: SELECT value from radcheck where username='%{User-Name}' and attribute='Max-Daily-Session'}" ) = noop (10) [exec] = noop (10) attr_filter.accounting_response: EXPAND %{User-Name} (10) attr_filter.accounting_response: --> vlado (10) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (10) [attr_filter.accounting_response] = updated (10) } # accounting = updated (10) Sent Disconnect-Request Id 121 from 0.0.0.0:45765 to 192.168.1.1:3799 length 64 (10) Acct-Session-Id = "AF67C8444C73C070" (10) User-Name = "vlado" (10) Calling-Station-Id = "YY-YY-YY-YY-YY-YY" (10) Sent Accounting-Response Id 223 from 192.168.1.23:1813 to 192.168.1.1:43128 length 0 (10) Finished request (10) Cleaning up request packet ID 223 with timestamp +68 Waking up in 1.9 seconds. (11) Received Accounting-Request Id 224 from 192.168.1.1:43128 to 192.168.1.23:1813 length 248 (11) Acct-Status-Type = Stop (11) Acct-Authentic = RADIUS (11) User-Name = "vlado" (11) NAS-Identifier = "XXXXXXXXXXXX" (11) Called-Station-Id = "XX-XX-XX-XX-XX-XX:5GWlan" (11) NAS-Port-Type = Wireless-802.11 (11) Service-Type = Framed-User (11) NAS-Port = 1 (11) Calling-Station-Id = "YY-YY-YY-YY-YY-YY" (11) Connect-Info = "CONNECT 54Mbps 802.11a" (11) Acct-Session-Id = "AF67C8444C73C070" (11) Acct-Multi-Session-Id = "9D9725C5137C2DEA" (11) WLAN-Pairwise-Cipher = 1027076 (11) WLAN-Group-Cipher = 1027076 (11) WLAN-AKM-Suite = 1027073 (11) Event-Timestamp = "Feb 18 2019 12:10:06 CET" (11) Acct-Delay-Time = 0 (11) Acct-Session-Time = 0 (11) Acct-Input-Packets = 70 (11) Acct-Output-Packets = 35 (11) Acct-Input-Octets = 4875 (11) Acct-Input-Gigawords = 0 (11) Acct-Output-Octets = 6463 (11) Acct-Output-Gigawords = 0 (11) # Executing section preacct from file /etc/freeradius/3.0/sites-enabled/default (11) preacct { (11) policy rewrite_calling_station_id { (11) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (11) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (11) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (11) update request { (11) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (11) --> YY-YY-YY-YY-YY-YY (11) &Calling-Station-Id := YY-YY-YY-YY-YY-YY (11) } # update request = noop (11) [updated] = updated (11) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (11) ... skipping else: Preceding "if" was taken (11) } # policy rewrite_calling_station_id = updated (11) [preprocess] = ok (11) policy acct_unique { (11) update request { (11) &Tmp-String-9 := "ai:" (11) } # update request = noop (11) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (11) EXPAND %{hex:&Class} (11) --> (11) EXPAND ^%{hex:&Tmp-String-9} (11) --> ^61693a (11) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (11) else { (11) update request { (11) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (11) --> a2134571c07be7a11c77ce01067a80b5 (11) &Acct-Unique-Session-Id := a2134571c07be7a11c77ce01067a80b5 (11) } # update request = noop (11) } # else = noop (11) } # policy acct_unique = noop (11) suffix: Checking for suffix after "@" (11) suffix: No '@' in User-Name = "vlado", looking up realm NULL (11) suffix: No such realm "NULL" (11) [suffix] = noop (11) [files] = noop (11) } # preacct = updated (11) # Executing section accounting from file /etc/freeradius/3.0/sites-enabled/default (11) accounting { (11) detail: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d (11) detail: --> /var/log/freeradius/radacct/192.168.1.1/detail-20190218 (11) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.1.1/detail-20190218 (11) detail: EXPAND %t (11) detail: --> Mon Feb 18 12:10:06 2019 (11) [detail] = ok (11) [unix] = ok (11) sradutmp: EXPAND /var/log/freeradius/sradutmp (11) sradutmp: --> /var/log/freeradius/sradutmp (11) sradutmp: EXPAND %{User-Name} (11) sradutmp: --> vlado (11) [sradutmp] = ok (11) sql: EXPAND %{tolower:type.%{Acct-Status-Type}.query} (11) sql: --> type.stop.query (11) sql: Using query template 'query' rlm_sql (sql): Reserved connection (7) (11) sql: EXPAND %{User-Name} (11) sql: --> vlado (11) sql: SQL-User-Name set to 'vlado' (11) sql: EXPAND UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' (11) sql: --> UPDATE radacct SET acctstoptime = FROM_UNIXTIME(1550488206), acctsessiontime = 0, acctinputoctets = '0' << 32 | '4875', acctoutputoctets = '0' << 32 | '6463', acctterminatecause = '', connectinfo_stop = 'CONNECT 54Mbps 802.11a' WHERE AcctUniqueId = 'a2134571c07be7a11c77ce01067a80b5' (11) sql: Executing query: UPDATE radacct SET acctstoptime = FROM_UNIXTIME(1550488206), acctsessiontime = 0, acctinputoctets = '0' << 32 | '4875', acctoutputoctets = '0' << 32 | '6463', acctterminatecause = '', connectinfo_stop = 'CONNECT 54Mbps 802.11a' WHERE AcctUniqueId = 'a2134571c07be7a11c77ce01067a80b5' rlm_sql_mysql: Rows matched: 1 Changed: 1 Warnings: 0 (11) sql: SQL query returned: success (11) sql: 1 record(s) updated rlm_sql (sql): Released connection (7) (11) [sql] = ok (11) if ( "%{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct where UserName='%{User-Name}'}" > "%{sql: SELECT value from radcheck where username='%{User-Name}' and attribute='Max-Daily-Session'}" ) { (11) EXPAND %{User-Name} (11) --> vlado (11) SQL-User-Name set to 'vlado' rlm_sql (sql): Reserved connection (6) (11) Executing select query: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct where UserName='vlado' rlm_sql (sql): Released connection (6) (11) EXPAND %{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct where UserName='%{User-Name}'} (11) --> 0 (11) EXPAND %{User-Name} (11) --> vlado (11) SQL-User-Name set to 'vlado' rlm_sql (sql): Reserved connection (8) (11) Executing select query: SELECT value from radcheck where username='vlado' and attribute='Max-Daily-Session' (11) SQL query returned no results rlm_sql (sql): Released connection (8) (11) EXPAND %{sql: SELECT value from radcheck where username='%{User-Name}' and attribute='Max-Daily-Session'} (11) --> (11) if ( "%{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct where UserName='%{User-Name}'}" > "%{sql: SELECT value from radcheck where username='%{User-Name}' and attribute='Max-Daily-Session'}" ) -> TRUE (11) if ( "%{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct where UserName='%{User-Name}'}" > "%{sql: SELECT value from radcheck where username='%{User-Name}' and attribute='Max-Daily-Session'}" ) { (11) update disconnect { (11) EXPAND %{Acct-Session-Id} (11) --> AF67C8444C73C070 (11) &Acct-Session-Id = AF67C8444C73C070 (11) EXPAND %{User-Name} (11) --> vlado (11) &User-Name = vlado (11) EXPAND %{Calling-Station-Id} (11) --> YY-YY-YY-YY-YY-YY (11) &Calling-Station-Id = YY-YY-YY-YY-YY-YY (11) } # update disconnect = noop (11) } # if ( "%{sql: SELECT IFNULL (SUM(AcctSessionTime),0) FROM radacct where UserName='%{User-Name}'}" > "%{sql: SELECT value from radcheck where username='%{User-Name}' and attribute='Max-Daily-Session'}" ) = noop (11) [exec] = noop (11) attr_filter.accounting_response: EXPAND %{User-Name} (11) attr_filter.accounting_response: --> vlado (11) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (11) [attr_filter.accounting_response] = updated (11) } # accounting = updated (11) Sent Disconnect-Request Id 246 from 0.0.0.0:45765 to 192.168.1.1:3799 length 64 (11) Acct-Session-Id = "AF67C8444C73C070" (11) User-Name = "vlado" (11) Calling-Station-Id = "YY-YY-YY-YY-YY-YY" (11) Sent Accounting-Response Id 224 from 192.168.1.23:1813 to 192.168.1.1:43128 length 0 (11) Finished request (11) Cleaning up request packet ID 224 with timestamp +68 Waking up in 1.8 seconds. (10) Marking home server 192.168.1.1 port 3799 alive (10) Clearing existing &reply: attributes (10) Received Disconnect-ACK Id 121 from 192.168.1.1:3799 to 192.168.1.23:45765 length 44 (10) Event-Timestamp = "Feb 18 2019 12:10:06 CET" (10) Message-Authenticator = 0xae87fb6ddac4f1f4c3cc317c01ba3d06 (10) # Executing section post-proxy from file /etc/freeradius/3.0/sites-enabled/default (10) post-proxy { (10) eap: No pre-existing handler found (10) [eap] = noop (10) } # post-proxy = noop (10) Cleaning up request packet ID 223 with timestamp +68 Waking up in 2.2 seconds. (11) Clearing existing &reply: attributes (11) Received Disconnect-NAK Id 246 from 192.168.1.1:3799 to 192.168.1.23:45765 length 50 (11) Error-Cause = Session-Context-Not-Found (11) Event-Timestamp = "Feb 18 2019 12:10:06 CET" (11) Message-Authenticator = 0x0e1e7e91440f0e7214127159319c047d (11) # Executing section post-proxy from file /etc/freeradius/3.0/sites-enabled/default (11) post-proxy { (11) eap: No pre-existing handler found (11) [eap] = noop (11) } # post-proxy = noop (11) Cleaning up request packet ID 224 with timestamp +68 Waking up in 4.5 seconds. (0) Cleaning up request packet ID 213 with timestamp +67 (1) Cleaning up request packet ID 214 with timestamp +67 (2) Cleaning up request packet ID 215 with timestamp +67 (3) Cleaning up request packet ID 216 with timestamp +67 (4) Cleaning up request packet ID 217 with timestamp +67 (5) Cleaning up request packet ID 218 with timestamp +68 (6) Cleaning up request packet ID 219 with timestamp +68 (7) Cleaning up request packet ID 220 with timestamp +68 Waking up in 0.1 seconds. (8) Cleaning up request packet ID 221 with timestamp +68 (9) Cleaning up request packet ID 222 with timestamp +68 Ready to process requests

2 14

Client Secret with Backslash
by Wingard, Nathaniel (Chapin) 20 Feb '19

20 Feb '19

I've been trying to set a client secret with a trailing backslash and find myself confused by the results. I am running the Debian 9 provided freeradius 3.0.12 (freeradius-3.0.12+dfsg-5+deb9u1). Secret I want: asdf\ Attempts (failures): secret = asdf\ - Results in config parsing error secret = asdf\\ - Results in config parsing error secret = 'asdf\' - Results in config parsing error secret = "asdf\" - Results in config parsing error secret = 'asdf\\' - Results: asdf\\ secret = "asdf\\" - Results: asdf\\ Attempts (successes?) secret = "as\df" - Results: as\df secret = "as\\df" - Results: as\\df I expected the last of my failures to work per https://networkradius.com/doc/3.0.10/unlang/data_single.html but it seems only \' is treated as an escape sequence in the client secret. Is there any way to have a client secret with a trailing backslash, and as an extension, can I have the string literal \' in my secret? Thanks, Nathaniel

3 4

Very rare failure to expand Foreach-Variable
by Graham Clinch 20 Feb '19

20 Feb '19

Once or twice per day - after many tens of thousands of requests have been successfully processed, a single request will not be processed as expected - freeradius doens't crash and there's no sign of memory corruption - further requests continue to be processed as expected. Originally this was seen on v3.0.12, but I have taken one server up to 3.0.x revision 694d088 from git and continue to see this. Running with -t to disable threading has not helped. There's a lot of custom unlang in the configuration. When run with -xx, I observe one line is missing for requests that failed. Here's a snippet from one of the failing requests: -=- radiusd[7451]: (85278) update { radiusd[7451]: (85278) &control:LU-SQL-Bridge-Exploded-Result := &control:LU-SQL-Bridge-Result -> "&request:LU-NE-Id := 2\n&control:LU-SQL-Bridge-Return-Code := noop" radiusd[7451]: (85278) } # update = noop radiusd[7451]: (85278) update { radiusd[7451]: (85278) &control:LU-SQL-Bridge-Return-Code !* ANY radiusd[7451]: (85278) } # update = noop radiusd[7451]: (85278) EXPAND %{explode:control:LU-SQL-Bridge-Exploded-Result } radiusd[7451]: (85278) --> 2 radiusd[7451]: (85278) foreach &control:LU-SQL-Bridge-Exploded-Result radiusd[7451]: (85278) if ("%{map:%{Foreach-Variable-0}}" != 1) { radiusd[7451]: (85278) EXPAND Foreach-Variable-0 radiusd[7451]: (85278) --> &request:LU-NE-Id := 2 radiusd[7451]: (85278) EXPAND %{map:%{Foreach-Variable-0}} radiusd[7451]: (85278) --> radiusd[7451]: (85278) if ("%{map:%{Foreach-Variable-0}}" != 1) -> TRUE radiusd[7451]: (85278) if ("%{map:%{Foreach-Variable-0}}" != 1) { radiusd[7451]: (85278) update { radiusd[7451]: (85278) &request:Module-Failure-Message += 'SQL bridge result contains invalid map fragment' radiusd[7451]: (85278) } # update = noop radiusd[7451]: (85278) [fail] = fail -=- And here is one (with identical inputs) that was processed as expected: -=- radiusd[7451]: (85308) update { radiusd[7451]: (85308) &control:LU-SQL-Bridge-Exploded-Result := &control:LU-SQL-Bridge-Result -> "&request:LU-NE-Id := 2\n&control:LU-SQL-Bridge-Return-Code := noop" radiusd[7451]: (85308) } # update = noop radiusd[7451]: (85308) update { radiusd[7451]: (85308) &control:LU-SQL-Bridge-Return-Code !* ANY radiusd[7451]: (85308) } # update = noop radiusd[7451]: (85308) EXPAND %{explode:control:LU-SQL-Bridge-Exploded-Result } radiusd[7451]: (85308) --> 2 radiusd[7451]: (85308) foreach &control:LU-SQL-Bridge-Exploded-Result radiusd[7451]: (85308) if ("%{map:%{Foreach-Variable-0}}" != 1) { radiusd[7451]: (85308) EXPAND Foreach-Variable-0 radiusd[7451]: (85308) --> &request:LU-NE-Id := 2 radiusd[7451]: (85308) &request:LU-NE-Id := 2 radiusd[7451]: (85308) EXPAND %{map:%{Foreach-Variable-0}} radiusd[7451]: (85308) --> 1 radiusd[7451]: (85308) if ("%{map:%{Foreach-Variable-0}}" != 1) -> FALSE -=- The line missing is '&request:LU-NE-Id := 2' - between "--> &request:LU-NE-Id := 2" and "EXPAND %{map:%{Foreach-Variable-0}}". I infer that the value of "&request:LU-NE-Id := 2" is not being returned from the expansion properly and thus map is being passed an empty string. I've had a glance around tmpl.c and modcall.c but I'm not making much progress working out where the variable value is normally printed. Can somebody more in touch with the unlang processor point me in the right direction? Graham

3 9

WG: New Message (sent by contact form at Network RADIUS)
by Schmid, Marco 20 Feb '19

20 Feb '19

Here's my question again. See the mail-history below! Greetings Marco Schmid Mit freundlichen Grüßen Marco Schmid Technik indasys connectivity GmbH Leitzstraße 4c D-70469 Stuttgart Telefon: +49 (711) 896659-110 Telefax: +49 (711) 896659-149 E-Mail: Marco.Schmid(a)indasys.de Web: www.indasys.de USID: DE273320932 HRB: 734651 AG Stuttgart Geschäftsführer: Sebastian Schwab, Dominik Appich -----Ursprüngliche Nachricht----- Von: Alan DeKok <aland(a)networkradius.com> Gesendet: Mittwoch, 20. Februar 2019 13:03 An: Schmid, Marco <Marco.Schmid(a)indasys.de> Betreff: Re: New Message (sent by contact form at Network RADIUS) > On Feb 20, 2019, at 4:24 AM, Schmid, Marco <Marco.Schmid(a)indasys.de> wrote: > > Hello Marc, My name is Alan, as seen in the email address. > but the documentation doesn't match with my log-entries: There are very good reasons for that. Again, we offer paid support. Free support is available on on freeradius-users mailing list. > For example, our freeradius-server logs this: >>>> > Sun Jan 27 12:28:28 2019 > Packet-Type = Access-Request > User-Name = "benedikt.schumacher" > NAS-IP-Address = 10.94.9.225 > NAS-Port = 0 > NAS-Identifier = "192.168.1.1" > NAS-Port-Type = Wireless-802.11 > Calling-Station-Id = "C0F4E6E0F137" > Called-Station-Id = "204C030306E8" > Service-Type = Framed-User > Framed-MTU = 1100 > EAP-Message = 0x020700061900 > State = 0x687fd3fb6d78cae55e81868c3d7bf0c0 > Aruba-Essid-Name = "ITS_L" > Aruba-Location-Id = "SWIS-AP92___1" > Aruba-AP-Group = "default" > Message-Authenticator = 0xdca6dccb7ca000b7fb4667d5f4bc3fc6 > Event-Timestamp = "Jan 27 2019 12:28:28 CET" > Timestamp = 1548588508 > <<< > > There's no "Acct-session-ID" like in your documentation: > https://wiki.freeradius.org/protocol/Disconnect%20Messages > > And for some reason, the "NAS-IP-Address" is wrong. > Because 10.94.9.225 is the Address for the server itself. > I'm waiting for your answer. > > > Greetings > Marco Schmid > Mit freundlichen Grüßen > > Marco Schmid > Technik > > > > indasys connectivity GmbH > Leitzstraße 4c > D-70469 Stuttgart > > Telefon: +49 (711) 896659-110 > Telefax: +49 (711) 896659-149 > E-Mail: Marco.Schmid(a)indasys.de > Web: www.indasys.de > > > > > USID: DE273320932 > HRB: 734651 AG Stuttgart > > Geschäftsführer: Sebastian Schwab, Dominik Appich -----Ursprüngliche > Nachricht----- > Von: Alan DeKok <aland(a)networkradius.com> > Gesendet: Montag, 18. Februar 2019 21:50 > An: Schmid, Marco <Marco.Schmid(a)indasys.de> > Cc: Rozier Marc <marc.rozier(a)networkradius.com> > Betreff: Re: New Message (sent by contact form at Network RADIUS) > > >> Person: Marco Schmid >> Email: marco.schmid(a)indasys.de >> >> We use FreeRADIUS Version 3.0.13 >> How can I trigger a CoA disconnect of an user? > > We're happy to help. Our support rates are available on our web site: > > https://networkradius.com/freeradius-support/index.html > > Or, free support is available via the "freeradius-users" mailing list. > >> According this instruction: >> https://kabellosblog.wordpress.com/2017/07/17/generating-coa-disconne >> cts-with-freeradius/ > > The server comes with extensive documentation, including how to trigger Disconnect-Request packets. There's usually no need to go to third-party web sites. Those sites are almost always out of date, or just wrong. > >> I should see a Session-ID in the Accept-Log: >> Acct-Session-Id = "607985949699040123" >> >> >> But in my log, I see this for example: >> Mon Jan 28 07:42:20 2019 >> Packet-Type = Access-Request >> User-Name = "g.ast" >> NAS-IP-Address = 10.94.9.225 >> NAS-Port = 0 >> NAS-Identifier = "192.168.1.1" >> NAS-Port-Type = Wireless-802.11 >> Calling-Station-Id = "9094971FA4F6" >> Called-Station-Id = "204C030306E8" >> Service-Type = Framed-User >> Framed-MTU = 1100 >> EAP-Message = 0x020b002e190017030300230000000000000004a1cf274ed5c660a3938195ef7110c99940f1edd77150dd82077959 >> State = 0x0eed3eba07e627368a56cd2bd5106f5c >> Aruba-Essid-Name = "ITS_L" >> Aruba-Location-Id = "24:f2:7f:c4:6e:dc" >> Aruba-AP-Group = "default" >> Aruba-Device-Type = "Linux" >> Message-Authenticator = 0x6df008dad3f18858f1720b6678d7b9bf >> Event-Timestamp = "Jan 28 2019 07:42:20 CET" >> Timestamp = 1548657740 >

2 1

Remotely monitoring server activity
by R3DNano 20 Feb '19

20 Feb '19

I'm trying to manage the global freeradius status from a remote location. The files under /var/log/radius/radacct are pretty detailed and have a lot of information about what is going on with the freeradius server. However, searching the old mailing list archives, I see there's a particular thread of someone asking how to send the radacct logs to a remote syslog being not a recommended practice. What's a practical way of having this information for further analysis outside of the freeradius server? Send it to an SQL database somehow perhaps? Also, about the logs sent to syslog (for further forwarding to a remote syslog server) - is there a way to customize what's being sent on those messages? Thanks.

6 9

What is a difference "Auth-Type eap"(with Auth-Type) and "eap"(without Auth-Type) in the "authenticate" section?
by Hiroyuki Sato 20 Feb '19

20 Feb '19

Hello, members. Could you tell me what is a difference "Auth-Type eap"(with Auth-Type) and "eap"(without Auth-Type) in the "authenticate" section? Below is an example. What document should I read? Best regards. (1) MS-CHAP authenticate { # # MSCHAP authentication. Auth-Type MS-CHAP { mschap } # # For old names, too. # mschap } (2) EAP authenticate { eap # # The older configurations sent a number of attributes in # Access-Challenge packets, which wasn't strictly correct. # If you want to filter out these attributes, uncomment # the following lines. # Auth-Type eap { eap { handled = 1 } if (handled && (Response-Packet-Type == Access-Challenge)) { attr_filter.access_challenge.post-auth handled # override the "updated" code from attr_filter } } } Environment * OS: CentOS7 * FreeRADIUS: 3.0.13 -- Hiroyuki Sato

2 4

A few questions about radsec
by work vlpl 19 Feb '19

19 Feb '19

Hello, I successfully configured freeradius server to support radsec and using radsecproxy to test it. But I have a few questions. I tried to find answers in the example configuration files, but it looks like there aren’t Why "Initial implementation" https://github.com/FreeRADIUS/freeradius-server/blob/v3.0.x/raddb/sites-ava… something important is not supported yet? If I understand radsec rfc correctly there are 3 possible ways to identify clients https://tools.ietf.org/html/draft-ietf-radext-radsec-12#section-2.4 by rfc all 3 should use some part of client certificate or TLS identifier. But judging by configuration in `tls` file I assume that freeradius uses ip address + certificate. Or only ip address if `proto = tcp` https://github.com/FreeRADIUS/freeradius-server/blob/v3.0.x/raddb/sites-ava… Am I right? It is very unlikely, but what if I will have to, or I will want to proxy radsec request to home server without client certificate (TLS-PSK). I should removed only secret value from configuration https://github.com/FreeRADIUS/freeradius-server/blob/v3.0.x/raddb/sites-ava… ? To test radsec I used radsecproxy + radlclient/eapol_test. Is there any other worthy utility for this? This is the quote from RFC Introduction https://tools.ietf.org/html/draft-ietf-radext-radsec-12#section-1 > The new features in RADIUS over TLS obsolete the use of IP addresses and shared MD5 secrets to identify other peers and thus allow the use of more contemporary trust models, e.g. checking a certificate by inspecting the issuer and other certificate properties. I'm interested in radius clients identification. Is it possible to get radius client id in radius config section that support unlang? For example CN or fingerprint from radius client certificate, like its by done for EAP-TLS request. -- Vladimir

3 6