- Freeradius-Users - lists.freeradius.org

Proxy requests on multiple backend Radius servers based on LDAP Group Membership
by Mathieu CLAIR 15 Oct '18

15 Oct '18

Hey there, I'm trying to route Radius requests on 2 backend Radius servers based on LDAP group membership. The purpose is to send Radius requests on the 1st server when the user is a member of an LDAP group (example CN=MyGroup,CN=Users,DC=foo,DC=bar) and to send all other requests on the 2nd Radius server. I'm wondering if it's possible and what is the best way to do it. I started to think about the folowing process : - declare an LDAP filter like (&(objectClass=user)(sAMAccountName=%{User-Name})(memberof=CN=MyGroup,CN=Use rs,DC=foo,DC=bar)) - use the filter (match not null ?) in the site configuration Something that sounds like bellow : my_ldap_filter = (&(objectClass=user)(sAMAccountName=%{User-Name})(memberof=CN=MyGroup,CN=Use rs,DC=foo,DC=bar)) authorize { if (%{my_ldap_filter} != "") { update control { Proxy-To-Realm := 'Radius1' } } else { update control { Proxy-To-Realm := 'Radius2' } } } I'm not sure about the syntax of this. Of course, I faced several errors "Entry is not a reference to a module" when I start manually the freeradius server. Do I need to use the LDAP module ? Thank you for your answer BR, Mathieu

2 2

Radius Attribute
by Maile Halatuituia 15 Oct '18

15 Oct '18

I have this on my radius packet send from my Cisco ASR 1001 with IPv6 enable to my Radius Accounting Server. *Oct 14 22:14:43.752: RADIUS: Vendor, Cisco [26] 35 *Oct 14 22:14:43.752: RADIUS: Cisco AVpair [1] 29 "connect-progress=LAN Ses Up" *Oct 14 22:14:43.752: RADIUS: Vendor, Cisco [26] 31 *Oct 14 22:14:43.752: RADIUS: Cisco AVpair [1] 25 "nas-tx-speed=1000000000" *Oct 14 22:14:43.752: RADIUS: Vendor, Cisco [26] 31 *Oct 14 22:14:43.752: RADIUS: Cisco AVpair [1] 25 "nas-rx-speed=1000000000" *Oct 14 22:14:43.752: RADIUS: Acct-Session-Time [46] 6 79768 *Oct 14 22:14:43.752: RADIUS: Acct-Input-Octets [42] 6 1063443 *Oct 14 22:14:43.752: RADIUS: Acct-Output-Octets [43] 6 1480018 *Oct 14 22:14:43.752: RADIUS: Vendor, Cisco [26] 37 *Oct 14 22:14:43.752: RADIUS: Vendor, Cisco [26] 35 *Oct 14 22:14:43.752: RADIUS: Cisco AVpair [1] 29 "connect-progress=LAN Ses Up" *Oct 14 22:14:43.752: RADIUS: Vendor, Cisco [26] 31 *Oct 14 22:14:43.752: RADIUS: Cisco AVpair [1] 25 "nas-tx-speed=1000000000" *Oct 14 22:14:43.752: RADIUS: Vendor, Cisco [26] 31 *Oct 14 22:14:43.752: RADIUS: Cisco AVpair [1] 25 "nas-rx-speed=1000000000" *Oct 14 22:14:43.752: RADIUS: Acct-Session-Time [46] 6 79768 *Oct 14 22:14:43.752: RADIUS: Acct-Input-Octets [42] 6 1063443 *Oct 14 22:14:43.752: RADIUS: Acct-Output-Octets [43] 6 1480018 *Oct 14 22:14:43.752: RADIUS: Vendor, Cisco [26] 37 *Oct 14 22:14:43.752: RADIUS: Cisco AVpair [1] 31 "acct-input-octets-ipv6=444093" *Oct 14 22:14:43.752: RADIUS: Vendor, Cisco [26] 38 *Oct 14 22:14:43.752: RADIUS: Cisco AVpair [1] 32 "acct-output-octets-ipv6=871971" *Oct 14 22:14:43.752: RADIUS: Acct-Input-Packets [47] 6 21676 *Oct 14 22:14:43.752: RADIUS: Acct-Output-Packets [48] 6 24477 *Oct 14 22:14:43.752: RADIUS: Vendor, Cisco [26] 36 *Oct 14 22:14:43.752: RADIUS: Cisco AVpair [1] 30 "acct-input-packets-ipv6=8250" *Oct 14 22:14:43.752: RADIUS: Vendor, Cisco [26] 37 *Oct 14 22:14:43.752: RADIUS: Cisco AVpair [1] 31 "acct-output-packets-ipv6=8719" *Oct 14 22:14:43.752: RADIUS: Acct-Authentic [45] 6 RADIUS [1] *Oct 14 22:14:43.752: RADIUS: Acct-Status-Type [40] 6 Watchdog [3] *Oct 14 22:14:43.752: RADIUS: NAS-Port-Type [61] 6 Ethernet [15] *Oct 14 22:14:43.752: RADIUS: NAS-Port [5] 6 111 *Oct 14 22:14:43.752: RADIUS: NAS-Port-Id [87] 11 "0/0/0/111" *Oct 14 22:14:43.752: RADIUS: Connect-Info [77] 15 "ACCESS-STATIC" *Oct 14 22:14:43.752: RADIUS: Vendor, Cisco [26] 41 *Oct 14 22:14:43.752: RADIUS: Cisco AVpair [1] 35 "client-mac-address=ae6e.0e44.ea8b" *Oct 14 22:14:43.752: RADIUS: Service-Type [6] 6 Framed [2] *Oct 14 22:14:43.752: RADIUS: NAS-IP-Address [4] 6 10.254.36.190 *Oct 14 22:14:43.752: RADIUS: home-hl-prefix [151] 10 "65738A12" *Oct 14 22:14:43.752: RADIUS: Event-Timestamp [55] 6 1539508483 *Oct 14 22:14:43.752: RADIUS: Acct-Input-Packets [47] 6 21676 *Oct 14 22:14:43.752: RADIUS: Acct-Output-Packets [48] 6 24477 *Oct 14 22:14:43.752: RADIUS: Vendor, Cisco [26] 36 *Oct 14 22:14:43.752: RADIUS: Cisco AVpair [1] 30 "acct-input-packets-ipv6=8250" *Oct 14 22:14:43.752: RADIUS: Vendor, Cisco [26] 37 *Oct 14 22:14:43.752: RADIUS: Cisco AVpair [1] 31 "acct-output-packets-ipv6=8719" *Oct 14 22:14:43.752: RADIUS: Acct-Authentic [45] 6 RADIUS [1] *Oct 14 22:14:43.752: RADIUS: Acct-Status-Type [40] 6 Watchdog [3] *Oct 14 22:14:43.752: RADIUS: NAS-Port-Type [61] 6 Ethernet [15] *Oct 14 22:14:43.752: RADIUS: NAS-Port [5] 6 111 *Oct 14 22:14:43.752: RADIUS: NAS-Port-Id [87] 11 "0/0/0/111" *Oct 14 22:14:43.752: RADIUS: Connect-Info [77] 15 "VRF" *Oct 14 22:14:43.752: RADIUS: Vendor, Cisco [26] 41 *Oct 14 22:14:43.752: RADIUS: Cisco AVpair [1] 35 "client-mac-address" *Oct 14 22:14:43.752: RADIUS: Service-Type [6] 6 Framed [2] *Oct 14 22:14:43.752: RADIUS: NAS-IP-Address [4] 6 IP *Oct 14 22:14:43.752: RADIUS: home-hl-prefix [151] 10 "65738A12" *Oct 14 22:14:43.752: RADIUS: Event-Timestamp [55] 6 1539508483 Note the ipv6 octect counter is normal but my issue comes when i try to add the ipv6 counter to my radius databases to process and it says it is unknown attribute *Oct 14 22:14:43.752: RADIUS: Cisco AVpair [1] 31 "acct-input-octets-ipv6=444093" *Oct 14 22:14:43.752: RADIUS: Cisco AVpair [1] 32 "acct-output-octets-ipv6=871971" ? Confidentiality Notice: This email (including any attachment) is intended for internal use only. Any unauthorized use, dissemination or copying of the content is prohibited. If you are not the intended recipient and have received this e-mail in error, please notify the sender by email and delete this email and any attachment.

3 7

Thread create failed: Invalid argument
by Timo Schenk 14 Oct '18

14 Oct '18

Hi all, i have used freeradius 3.0.15 for many months without problems on my Synology Diskstation DS1513+. Since 3 days the radius server wont start anymore. The startup stops with the message „Thread create failed: invalid argument“. But a startup in debug mode works without problems. I hope anyone can help me with this problem. debug output of: radiusd -x (i know i should copy the debug output from radiusd -X. This debug output is below) main { name = "radiusd" prefix = "/opt" localstatedir = "/opt/var" sbindir = "/opt/sbin" logdir = "/opt/var/log/radius" run_dir = "/opt/var/run/radiusd" libdir = "/opt/lib" radacctdir = "/opt/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/opt/var/run/radiusd/radiusd.pid" checkrad = "/opt/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_linelog # Loading module "linelog" from file /opt/etc/raddb/mods-enabled/linelog linelog { filename = "/opt/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /opt/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/opt/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_radutmp # Loading module "radutmp" from file /opt/etc/raddb/mods-enabled/radutmp radutmp { filename = "/opt/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_chap # Loading module "chap" from file /opt/etc/raddb/mods-enabled/chap # Loaded module rlm_dhcp # Loading module "dhcp" from file /opt/etc/raddb/mods-enabled/dhcp # Loaded module rlm_expiration # Loading module "expiration" from file /opt/etc/raddb/mods-enabled/expiration # Loaded module rlm_exec # Loading module "echo" from file /opt/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /opt/etc/raddb/mods-enabled/replicate # Loaded module rlm_preprocess # Loading module "preprocess" from file /opt/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/opt/etc/raddb/mods-config/preprocess/huntgroups" hints = "/opt/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /opt/etc/raddb/mods-enabled/utf8 # Loading module "sradutmp" from file /opt/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/opt/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /opt/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_unix # Loading module "unix" from file /opt/etc/raddb/mods-enabled/unix unix { radwtmp = "/opt/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_eap # Loading module "eap" from file /opt/etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_date # Loading module "date" from file /opt/etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loaded module rlm_realm # Loading module "IPASS" from file /opt/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /opt/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /opt/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /opt/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_files # Loading module "files" from file /opt/etc/raddb/mods-enabled/files files { filename = "/opt/etc/raddb/mods-config/files/authorize" acctusersfile = "/opt/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/opt/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_cache # Loading module "cache_eap" from file /opt/etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_pap # Loading module "pap" from file /opt/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_expr # Loading module "expr" from file /opt/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_digest # Loading module "digest" from file /opt/etc/raddb/mods-enabled/digest # Loaded module rlm_logintime # Loading module "logintime" from file /opt/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /opt/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_always # Loading module "reject" from file /opt/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /opt/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /opt/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /opt/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /opt/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /opt/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /opt/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /opt/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /opt/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /opt/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/opt/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /opt/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/opt/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /opt/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/opt/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /opt/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/opt/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /opt/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/opt/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_detail # Loading module "auth_log" from file /opt/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/opt/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /opt/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/opt/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /opt/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/opt/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /opt/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/opt/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "ntlm_auth" from file /opt/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_unpack # Loading module "unpack" from file /opt/etc/raddb/mods-enabled/unpack # Loaded module rlm_soh # Loading module "soh" from file /opt/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /opt/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "detail" from file /opt/etc/raddb/mods-enabled/detail detail { filename = "/opt/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "exec" from file /opt/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_sql # Loading module "sql" from file /opt/etc/raddb/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "127.0.0.1" port = 3307 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-Group}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime = (%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} - strftime('%%s', acctstarttime)), acctterminatecause = '%{Acct-Terminate-Cause}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= %{integer:Event-Timestamp}" } accounting-off { query = "UPDATE radacct SET acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime = (%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} - strftime('%%s', acctstarttime)), acctterminatecause = '%{Acct-Terminate-Cause}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= %{integer:Event-Timestamp}" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', %{%{integer:Event-Timestamp}:-date('now')}, %{%{integer:Event-Timestamp}:-date('now')}, NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = %{%{integer:Event-Timestamp}:-date('now')}, acctinterval = 0, framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = %{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0}, acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 | %{%{Acct-Output-Octets}:-0} WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = %{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0}, acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 | %{%{Acct-Output-Octets}:-0}, acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group instantiate { } # Instantiating module "linelog" from file /opt/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /opt/etc/raddb/mods-enabled/linelog # Instantiating module "expiration" from file /opt/etc/raddb/mods-enabled/expiration # Instantiating module "preprocess" from file /opt/etc/raddb/mods-enabled/preprocess reading pairlist file /opt/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /opt/etc/raddb/mods-config/preprocess/hints # Instantiating module "eap" from file /opt/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 pem_file_type = yes private_key_file = "/usr/local/etc/certificate/RadiusServer/radiusd/privkey.pem" certificate_file = "/usr/local/etc/certificate/RadiusServer/radiusd/fullchain.pem" ca_file = "/usr/local/etc/certificate/RadiusServer/radiusd/chain.pem" private_key_password = <<< secret >>> dh_file = "/opt/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "IPASS" from file /opt/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /opt/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /opt/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /opt/etc/raddb/mods-enabled/realm # Instantiating module "files" from file /opt/etc/raddb/mods-enabled/files reading pairlist file /opt/etc/raddb/mods-config/files/authorize reading pairlist file /opt/etc/raddb/mods-config/files/accounting reading pairlist file /opt/etc/raddb/mods-config/files/pre-proxy # Instantiating module "cache_eap" from file /opt/etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "pap" from file /opt/etc/raddb/mods-enabled/pap # Instantiating module "logintime" from file /opt/etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /opt/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "reject" from file /opt/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /opt/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /opt/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /opt/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /opt/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /opt/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /opt/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /opt/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /opt/etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /opt/etc/raddb/mods-enabled/attr_filter reading pairlist file /opt/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /opt/etc/raddb/mods-enabled/attr_filter reading pairlist file /opt/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /opt/etc/raddb/mods-enabled/attr_filter reading pairlist file /opt/etc/raddb/mods-config/attr_filter/access_reject [/opt/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/opt/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /opt/etc/raddb/mods-enabled/attr_filter reading pairlist file /opt/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /opt/etc/raddb/mods-enabled/attr_filter reading pairlist file /opt/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "auth_log" from file /opt/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /opt/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /opt/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /opt/etc/raddb/mods-enabled/detail.log # Instantiating module "etc_passwd" from file /opt/etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "detail" from file /opt/etc/raddb/mods-enabled/detail # Instantiating module "sql" from file /opt/etc/raddb/mods-enabled/sql rlm_sql_mysql: libmysql version: 5.7.9 mysql { tls { } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 127.0.0.1 via TCP/IP, server version 5.5.5-10.3.7-MariaDB-log, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 127.0.0.1 via TCP/IP, server version 5.5.5-10.3.7-MariaDB-log, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 127.0.0.1 via TCP/IP, server version 5.5.5-10.3.7-MariaDB-log, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 127.0.0.1 via TCP/IP, server version 5.5.5-10.3.7-MariaDB-log, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 127.0.0.1 via TCP/IP, server version 5.5.5-10.3.7-MariaDB-log, protocol version 10 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Adding client 192.168.42.10 (AP-H-Obergeschoss) to global clients list rlm_sql (192.168.42.10): Client "AP-H-Obergeschoss" (sql) added rlm_sql (sql): Adding client 192.168.42.11 (AP-H-Garage) to global clients list rlm_sql (192.168.42.11): Client "AP-H-Garage" (sql) added rlm_sql (sql): Adding client 192.168.42.12 (AP-H-Keller) to global clients list rlm_sql (192.168.42.12): Client "AP-H-Keller" (sql) added rlm_sql (sql): Adding client 192.168.44.10 (AP-E-Obergeschoss) to global clients list rlm_sql (192.168.44.10): Client "AP-E-Obergeschoss" (sql) added rlm_sql (sql): Adding client 192.168.44.11 (AP-E-Garage) to global clients list rlm_sql (192.168.44.11): Client "AP-E-Garage" (sql) added rlm_sql (sql): Adding client 192.168.44.12 (AP-E-Werkstatt) to global clients list rlm_sql (192.168.44.12): Client "AP-E-Werkstatt" (sql) added rlm_sql (sql): Released connection (0) Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 127.0.0.1 via TCP/IP, server version 5.5.5-10.3.7-MariaDB-log, protocol version 10 } # modules radiusd: #### Loading Virtual Servers #### server { # from file /opt/etc/raddb/radiusd.conf } # server server inner-tunnel { # from file /opt/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /opt/etc/raddb/sites-enabled/inner-tunnel:331 } # server inner-tunnel server default { # from file /opt/etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-auth {...} } # server default thread pool { start_servers = 5 max_servers = 32 min_spare_servers = 3 max_spare_servers = 10 max_requests_per_server = 0 cleanup_delay = 5 max_queue_size = 65536 auto_limit_acct = no } Thread create failed: Invalid argument Debug output of: radiusd -X FreeRADIUS Version 3.0.15 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /opt/share/freeradius/dictionary including dictionary file /opt/share/freeradius/dictionary.dhcp including dictionary file /opt/share/freeradius/dictionary.vqp including dictionary file /opt/etc/raddb/dictionary including configuration file /opt/etc/raddb/radiusd.conf including configuration file /opt/etc/raddb/clients.conf including files in directory /opt/etc/raddb/mods-enabled/ including configuration file /opt/etc/raddb/mods-enabled/linelog including configuration file /opt/etc/raddb/mods-enabled/radutmp including configuration file /opt/etc/raddb/mods-enabled/chap including configuration file /opt/etc/raddb/mods-enabled/dhcp including configuration file /opt/etc/raddb/mods-enabled/expiration including configuration file /opt/etc/raddb/mods-enabled/echo including configuration file /opt/etc/raddb/mods-enabled/replicate including configuration file /opt/etc/raddb/mods-enabled/preprocess including configuration file /opt/etc/raddb/mods-enabled/utf8 including configuration file /opt/etc/raddb/mods-enabled/sradutmp including configuration file /opt/etc/raddb/mods-enabled/dynamic_clients including configuration file /opt/etc/raddb/mods-enabled/unix including configuration file /opt/etc/raddb/mods-enabled/eap including configuration file /opt/etc/raddb/mods-enabled/date including configuration file /opt/etc/raddb/mods-enabled/realm including configuration file /opt/etc/raddb/mods-enabled/files including configuration file /opt/etc/raddb/mods-enabled/cache_eap including configuration file /opt/etc/raddb/mods-enabled/pap including configuration file /opt/etc/raddb/mods-enabled/expr including configuration file /opt/etc/raddb/mods-enabled/digest including configuration file /opt/etc/raddb/mods-enabled/logintime including configuration file /opt/etc/raddb/mods-enabled/mschap including configuration file /opt/etc/raddb/mods-enabled/always including configuration file /opt/etc/raddb/mods-enabled/attr_filter including configuration file /opt/etc/raddb/mods-enabled/detail.log including configuration file /opt/etc/raddb/mods-enabled/ntlm_auth including configuration file /opt/etc/raddb/mods-enabled/unpack including configuration file /opt/etc/raddb/mods-enabled/soh including configuration file /opt/etc/raddb/mods-enabled/passwd including configuration file /opt/etc/raddb/mods-enabled/detail including configuration file /opt/etc/raddb/mods-enabled/exec including configuration file /opt/etc/raddb/mods-enabled/sql including configuration file /opt/etc/raddb/mods-config/sql/main/sqlite/queries.conf including files in directory /opt/etc/raddb/policy.d/ including configuration file /opt/etc/raddb/policy.d/dhcp including configuration file /opt/etc/raddb/policy.d/moonshot-targeted-ids including configuration file /opt/etc/raddb/policy.d/control including configuration file /opt/etc/raddb/policy.d/cui including configuration file /opt/etc/raddb/policy.d/accounting including configuration file /opt/etc/raddb/policy.d/eap including configuration file /opt/etc/raddb/policy.d/canonicalization including configuration file /opt/etc/raddb/policy.d/debug including configuration file /opt/etc/raddb/policy.d/operator-name including configuration file /opt/etc/raddb/policy.d/abfab-tr including configuration file /opt/etc/raddb/policy.d/filter including files in directory /opt/etc/raddb/sites-enabled/ including configuration file /opt/etc/raddb/sites-enabled/inner-tunnel including configuration file /opt/etc/raddb/sites-enabled/default main { security { allow_core_dumps = no } name = "radiusd" prefix = "/opt" localstatedir = "/opt/var" logdir = "/opt/var/log/radius" run_dir = "/opt/var/run/radiusd" } main { name = "radiusd" prefix = "/opt" localstatedir = "/opt/var" sbindir = "/opt/sbin" logdir = "/opt/var/log/radius" run_dir = "/opt/var/run/radiusd" libdir = "/opt/lib" radacctdir = "/opt/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/opt/var/run/radiusd/radiusd.pid" checkrad = "/opt/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_linelog # Loading module "linelog" from file /opt/etc/raddb/mods-enabled/linelog linelog { filename = "/opt/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /opt/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/opt/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_radutmp # Loading module "radutmp" from file /opt/etc/raddb/mods-enabled/radutmp radutmp { filename = "/opt/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_chap # Loading module "chap" from file /opt/etc/raddb/mods-enabled/chap # Loaded module rlm_dhcp # Loading module "dhcp" from file /opt/etc/raddb/mods-enabled/dhcp # Loaded module rlm_expiration # Loading module "expiration" from file /opt/etc/raddb/mods-enabled/expiration # Loaded module rlm_exec # Loading module "echo" from file /opt/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /opt/etc/raddb/mods-enabled/replicate # Loaded module rlm_preprocess # Loading module "preprocess" from file /opt/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/opt/etc/raddb/mods-config/preprocess/huntgroups" hints = "/opt/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /opt/etc/raddb/mods-enabled/utf8 # Loading module "sradutmp" from file /opt/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/opt/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /opt/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_unix # Loading module "unix" from file /opt/etc/raddb/mods-enabled/unix unix { radwtmp = "/opt/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_eap # Loading module "eap" from file /opt/etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_date # Loading module "date" from file /opt/etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loaded module rlm_realm # Loading module "IPASS" from file /opt/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /opt/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /opt/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /opt/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_files # Loading module "files" from file /opt/etc/raddb/mods-enabled/files files { filename = "/opt/etc/raddb/mods-config/files/authorize" acctusersfile = "/opt/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/opt/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_cache # Loading module "cache_eap" from file /opt/etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_pap # Loading module "pap" from file /opt/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_expr # Loading module "expr" from file /opt/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_digest # Loading module "digest" from file /opt/etc/raddb/mods-enabled/digest # Loaded module rlm_logintime # Loading module "logintime" from file /opt/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /opt/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_always # Loading module "reject" from file /opt/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /opt/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /opt/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /opt/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /opt/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /opt/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /opt/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /opt/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /opt/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /opt/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/opt/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /opt/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/opt/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /opt/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/opt/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /opt/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/opt/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /opt/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/opt/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_detail # Loading module "auth_log" from file /opt/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/opt/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /opt/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/opt/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /opt/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/opt/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /opt/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/opt/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "ntlm_auth" from file /opt/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_unpack # Loading module "unpack" from file /opt/etc/raddb/mods-enabled/unpack # Loaded module rlm_soh # Loading module "soh" from file /opt/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /opt/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "detail" from file /opt/etc/raddb/mods-enabled/detail detail { filename = "/opt/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "exec" from file /opt/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_sql # Loading module "sql" from file /opt/etc/raddb/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "127.0.0.1" port = 3307 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-Group}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime = (%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} - strftime('%%s', acctstarttime)), acctterminatecause = '%{Acct-Terminate-Cause}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= %{integer:Event-Timestamp}" } accounting-off { query = "UPDATE radacct SET acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime = (%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} - strftime('%%s', acctstarttime)), acctterminatecause = '%{Acct-Terminate-Cause}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= %{integer:Event-Timestamp}" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', %{%{integer:Event-Timestamp}:-date('now')}, %{%{integer:Event-Timestamp}:-date('now')}, NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = %{%{integer:Event-Timestamp}:-date('now')}, acctinterval = 0, framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = %{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0}, acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 | %{%{Acct-Output-Octets}:-0} WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = %{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0}, acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 | %{%{Acct-Output-Octets}:-0}, acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group instantiate { } # Instantiating module "linelog" from file /opt/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /opt/etc/raddb/mods-enabled/linelog # Instantiating module "expiration" from file /opt/etc/raddb/mods-enabled/expiration # Instantiating module "preprocess" from file /opt/etc/raddb/mods-enabled/preprocess reading pairlist file /opt/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /opt/etc/raddb/mods-config/preprocess/hints # Instantiating module "eap" from file /opt/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 pem_file_type = yes private_key_file = "/usr/local/etc/certificate/RadiusServer/radiusd/privkey.pem" certificate_file = "/usr/local/etc/certificate/RadiusServer/radiusd/fullchain.pem" ca_file = "/usr/local/etc/certificate/RadiusServer/radiusd/chain.pem" private_key_password = <<< secret >>> dh_file = "/opt/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = " http://127.0.0.1/ocsp/ " use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "IPASS" from file /opt/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /opt/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /opt/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /opt/etc/raddb/mods-enabled/realm # Instantiating module "files" from file /opt/etc/raddb/mods-enabled/files reading pairlist file /opt/etc/raddb/mods-config/files/authorize reading pairlist file /opt/etc/raddb/mods-config/files/accounting reading pairlist file /opt/etc/raddb/mods-config/files/pre-proxy # Instantiating module "cache_eap" from file /opt/etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "pap" from file /opt/etc/raddb/mods-enabled/pap # Instantiating module "logintime" from file /opt/etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /opt/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "reject" from file /opt/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /opt/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /opt/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /opt/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /opt/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /opt/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /opt/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /opt/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /opt/etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /opt/etc/raddb/mods-enabled/attr_filter reading pairlist file /opt/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /opt/etc/raddb/mods-enabled/attr_filter reading pairlist file /opt/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /opt/etc/raddb/mods-enabled/attr_filter reading pairlist file /opt/etc/raddb/mods-config/attr_filter/access_reject [/opt/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/opt/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /opt/etc/raddb/mods-enabled/attr_filter reading pairlist file /opt/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /opt/etc/raddb/mods-enabled/attr_filter reading pairlist file /opt/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "auth_log" from file /opt/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /opt/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /opt/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /opt/etc/raddb/mods-enabled/detail.log # Instantiating module "etc_passwd" from file /opt/etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "detail" from file /opt/etc/raddb/mods-enabled/detail # Instantiating module "sql" from file /opt/etc/raddb/mods-enabled/sql rlm_sql_mysql: libmysql version: 5.7.9 mysql { tls { } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 127.0.0.1 via TCP/IP, server version 5.5.5-10.3.7-MariaDB-log, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 127.0.0.1 via TCP/IP, server version 5.5.5-10.3.7-MariaDB-log, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 127.0.0.1 via TCP/IP, server version 5.5.5-10.3.7-MariaDB-log, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 127.0.0.1 via TCP/IP, server version 5.5.5-10.3.7-MariaDB-log, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 127.0.0.1 via TCP/IP, server version 5.5.5-10.3.7-MariaDB-log, protocol version 10 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Adding client 192.168.42.10 (AP-H-Obergeschoss) to global clients list rlm_sql (192.168.42.10): Client "AP-H-Obergeschoss" (sql) added rlm_sql (sql): Adding client 192.168.42.11 (AP-H-Garage) to global clients list rlm_sql (192.168.42.11): Client "AP-H-Garage" (sql) added rlm_sql (sql): Adding client 192.168.42.12 (AP-H-Keller) to global clients list rlm_sql (192.168.42.12): Client "AP-H-Keller" (sql) added rlm_sql (sql): Adding client 192.168.44.10 (AP-E-Obergeschoss) to global clients list rlm_sql (192.168.44.10): Client "AP-E-Obergeschoss" (sql) added rlm_sql (sql): Adding client 192.168.44.11 (AP-E-Garage) to global clients list rlm_sql (192.168.44.11): Client "AP-E-Garage" (sql) added rlm_sql (sql): Adding client 192.168.44.12 (AP-E-Werkstatt) to global clients list rlm_sql (192.168.44.12): Client "AP-E-Werkstatt" (sql) added rlm_sql (sql): Released connection (0) Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 127.0.0.1 via TCP/IP, server version 5.5.5-10.3.7-MariaDB-log, protocol version 10 } # modules radiusd: #### Loading Virtual Servers #### server { # from file /opt/etc/raddb/radiusd.conf } # server server inner-tunnel { # from file /opt/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /opt/etc/raddb/sites-enabled/inner-tunnel:331 } # server inner-tunnel server default { # from file /opt/etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Ready to process requests Thanks Timo

2 1

Instantiation failed for module "preprocess"
by One Zero Art 13 Oct '18

13 Oct '18

Hi, I am new to freeradius, I am trying to install freeradius in Ubuntu 16.04 but I failed. I am getting this error message. Please check below. Please help. proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/freeradius/huntgroups rlm_preprocess: Error reading /etc/freeradius/huntgroups /etc/freeradius/modules/preprocess[13]: Instantiation failed for module "preprocess" /etc/freeradius/sites-enabled/default[88]: Failed to find "preprocess" in the "modules" section. /etc/freeradius/sites-enabled/default[69]: Errors parsing authorize section. root@server:~# clear root@server:~# sudo freeradius -X freeradius: FreeRADIUS Version 2.2.8, for host x86_64-pc-linux-gnu, built on Jul 26 2017 at 15:27:21 Copyright (C) 1999-2015 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License. For more information about these matters, see the file named COPYRIGHT. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/dhcp_sqlippool including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/replicate including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/rediswho including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/opendirectory including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/radrelay including configuration file /etc/freeradius/modules/cache including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/soh including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/redis including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/dynamic_clients including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/sql.conf including configuration file /etc/freeradius/sql/mysql/dialup.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes allow_vulnerable_openssl = no } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf modules { Module: Creating Auth-Type = digest Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/freeradius/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 1024 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/freeradius/huntgroups rlm_preprocess: Error reading /etc/freeradius/huntgroups /etc/freeradius/modules/preprocess[13]: Instantiation failed for module "preprocess" /etc/freeradius/sites-enabled/default[88]: Failed to find "preprocess" in the "modules" section. /etc/freeradius/sites-enabled/default[69]: Errors parsing authorize section. root@server:~# Thank you

2 4

Installing FreeRADIUS from source on macOS
by Palvelin Postmaster 13 Oct '18

13 Oct '18

Hi, has anyone successfully installed FreeRADIUS 3.x and it’s dependencies from source on macOS Mojave (or previous versions)? More specifically, I’m primarily interested in using FR for authenticating against Open Directory. I’d prefer not to use Homebrew to install because I already use Macports (unfortunately there isn’t a 3.x build available yet). The wiki instructions: https://wiki.freeradius.org/building/macOS are very straight forward but don't include some of the configure flags ('--with-talloc-lib-dir --with-talloc-include-dir= --with-openssl-lib-dir= --with-openssl-include-dir’) included in the Homebrew formula: https://github.com/Homebrew/homebrew-core/blob/master/Formula/freeradius-se… Also, Apple's Makefile of FreeRADIUS 2.2 included in the Server App has a few other configure flags ('--disable-static --enable-shared --enable-ltdl-install=yes --without-rlm_perl --without-rlm_sql_mysql') as well as some CC and LD flags which I’m thinking could still be relevant: https://opensource.apple.com/source/freeradius/freeradius-42/Makefile.auto.…) It would appear OD support is an ’experimental’ feature in FR 3.x so I believe '--with-experimental-modules’ is needed at the very least. -- Palvelin.fi Hostmaster postmaster(a)palvelin.fi

5 11

Passing Run-time variables in rlm_python module
by work vlpl 12 Oct '18

12 Oct '18

Hi, I want to pass run-time variable (https://wiki.freeradius.org/config/run_time_variables) into python module. In unlang run-time variables can be referenced without any attribute lists, it looks like they stored in requests list, but it is not, so they are not available in python module. And because run-time variables does not support assignment, this unlang construction is not possible update request { Packet-Type := "%{Packet-Type}" } I define custom attribute and assign run-time variable value to it. Is there other way to pass run-time variable into python module? -- Vladimir

2 1

pap: WARNING: Authentication will fail unless a "known good" password is available
by ahmet erkol 12 Oct '18

12 Oct '18

Hi, I installed freeradius 3.0.16 with mysql. But i have an error and warning like this. (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject I couldn't find a solution. This is the mysql radcheck table, mysql> select * from radcheck; +----+----------+--------------------+----+--------+ | id | username | attribute | op | value | +----+----------+--------------------+----+--------+ | 8 | ahmet | User-Password | := | 123456 | +----+----------+--------------------+----+--------+ This is the whole debug Ready to process requests (0) Received Access-Request Id 71 from 10.26.144.169:54792 to 10.9.15.250:1812 length 45 (0) User-Name = "ahmet" (0) User-Password = "123456" (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "ahmet", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) sql: EXPAND %{User-Name} (0) sql: --> ahmet (0) sql: SQL-User-Name set to 'ahmet' rlm_sql (sql): Reserved connection (1) (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (0) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'ahmet' ORDER BY id (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'ahmet' ORDER BY id (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'ahmet' ORDER BY priority (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'ahmet' ORDER BY priority (0) sql: User not found in any groups rlm_sql (sql): Released connection (1) Need 4 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used (0) [sql] = notfound (0) [expiration] = noop (0) [logintime] = noop (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Post-Auth-Type REJECT { (0) sql: EXPAND .query (0) sql: --> .query (0) sql: Using query template 'query' rlm_sql (sql): Reserved connection (2) (0) sql: EXPAND %{User-Name} (0) sql: --> ahmet (0) sql: SQL-User-Name set to 'ahmet' (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'ahmet', '123456', 'Access-Reject', '2018-10-12 09:37:39') (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'ahmet', '123456', 'Access-Reject', '2018-10-12 09:37:39') (0) sql: SQL query returned: success (0) sql: 1 record(s) updated rlm_sql (sql): Released connection (2) (0) [sql] = ok (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> ahmet (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) [eap] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # Post-Auth-Type REJECT = updated (0) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 71 from 10.9.15.250:1812 to 10.26.144.169:54792 length 20 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 71 with timestamp +2 Ready to process requests

5 13

[proposal] to add LDAP freeradius-radaact.schema
by Zeus Panchenko 12 Oct '18

12 Oct '18

<#secure method=pgp mode=sign sender=0FF7A32A> hi, I need to write to client's configuration LDAP object, values of these acct attributes: NAS-Port-Id NAS-Port-Type Called-Station-Id NAS-Identifier NAS-IP-Address Timestamp I wasn't able to find any among existing ones, so I want to propose to extend current freeradius LDAP schemas with the one for accounting (file is attached) I believe it'd be great to have it in one place, rather than write custom schema ... -- Zeus V. Panchenko jid:zeus@im.ibs.dn.ua IT Dpt., I.B.S. LLC GMT+2 (EET) attributetype ( 1.3.6.1.4.1.11344.5.1.1.1 NAME 'radiusAcctSessionId' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.2 NAME 'radiusAcctUniqueId' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.3 NAME 'radiusUserName' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.4 NAME 'radiusRealm' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.5 NAME 'radiusNASIPAddress' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.6 NAME 'radiusNASPortId' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.7 NAME 'radiusNASPortType' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.8 NAME 'radiusAcctStartTime' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.9 NAME 'radiusAcctUpdateTime' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.10 NAME 'radiusAcctStopTime' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.11 NAME 'radiusAcctInterval' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.12 NAME 'radiusAcctSessionTime' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.13 NAME 'radiusAcctAuthentic' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.14 NAME 'radiusConnectInfoStart' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.15 NAME 'radiusConnectInfoStop' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.16 NAME 'radiusAcctInputOctets' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.17 NAME 'radiusAcctOutputOctets' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.18 NAME 'radiusCalledStationId' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.19 NAME 'radiusCallingStationId' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.20 NAME 'radiusAcctTerminateCause' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.21 NAME 'radiusServiceType' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.22 NAME 'radiusFramedProtocol' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.11344.5.1.1.23 NAME 'radiusFramedIpAddress' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) objectclass ( 1.3.6.1.4.1.11344.5.1.2.1 NAME 'radiusacct' SUP top AUXILIARY MAY ( radiusAcctSessionId $ radiusAcctUniqueId $ radiusUserName $ radiusRealm $ radiusNASIPAddress $ radiusNASPortId $ radiusNASPortType $ radiusAcctStartTime $ radiusAcctUpdateTime $ radiusAcctStopTime $ radiusAcctInterval $ radiusAcctSessionTime $ radiusAcctAuthentic $ radiusConnectInfoStart $ radiusConnectInfoStop $ radiusAcctInputOctets $ radiusAcctOutputOctets $ radiusCalledStationId $ radiusCallingStationId $ radiusAcctTerminateCause $ radiusServiceType $ radiusFramedProtocol $ radiusFramedIpAddress ) )

2 1

Free Radius + Pfsense + Captive portal + Social Login
by hiran bhagvan 12 Oct '18

12 Oct '18

Hi I have just installed Pfsense and free radius. Can anyone tell me if it is possible for me to configure pfsense / free radius to achieve the following. I have a number of Hardware Firewall Routers at different locations around the country. I want to offer "Guest wifi" i want users to connect the the guest SSID and then see a splash screen with the option to login with facebook, google, twitter etc. Once they login their MAC address of their device will be saved on pfsence database so if that user goes to another site and connects to another router they will not have to login again. Is this possible? If it is can anyone tell me how i go about configuring this with pfsence / free radius. Thank Hiran Image by FlamingText.com

3 3

Username tolower
by Nischal Mathabhik 12 Oct '18

12 Oct '18

Hi All, I am trying to locate the place in freeradius 3 where it i can set it to change the username tolower before it passes it to ldap for Authentication. -- Regards,

2 2