- Freeradius-Users - lists.freeradius.org

Fwd: Freeradius3 Empty authorize section
by Agnel Varghese 02 Aug '18

02 Aug '18

Hi all, Using FreeRADIUS Version 3.0.17. If non default ports are used (1712 below) getting Access-Reject with below error. Same works for 1812 port Debugs failed case ------------------ Fri Jul 27 11:44:17 2018 : Debug: (0) Received Access-Request Id 74 from 192.168.122.1:54017 to 192.168.122.1:1712 length 75 Fri Jul 27 11:44:17 2018 : Debug: (0) User-Name = "agnel" Fri Jul 27 11:44:17 2018 : Debug: (0) User-Password = "cisco" Fri Jul 27 11:44:17 2018 : Debug: (0) NAS-IP-Address = 10.105.236.107 Fri Jul 27 11:44:17 2018 : Debug: (0) NAS-Port = 0 Fri Jul 27 11:44:17 2018 : Debug: (0) Message-Authenticator = 0xddff1bd7dc9e5b44c3f0c9ecf089d325 Fri Jul 27 11:44:17 2018 : Debug: (0) session-state: No State attribute Fri Jul 27 11:44:17 2018 : Debug: (0) Empty authorize section. Using default return values. Fri Jul 27 11:44:17 2018 : ERROR: (0) No Auth-Type found: rejecting the user via Post-Auth-Type = Reject Fri Jul 27 11:44:17 2018 : Debug: (0) Failed to authenticate the user Fri Jul 27 11:44:17 2018 : Debug: (0) Using Post-Auth-Type Reject Fri Jul 27 11:44:17 2018 : Debug: (0) Post-Auth-Type sub-section not found. Ignoring. Fri Jul 27 11:44:17 2018 : Debug: (0) Delaying response for 1.000000 seconds Fri Jul 27 11:44:17 2018 : Debug: Waking up in 0.3 seconds. Fri Jul 27 11:44:17 2018 : Debug: Waking up in 0.6 seconds. Fri Jul 27 11:44:18 2018 : Debug: (0) Sending delayed response Fri Jul 27 11:44:18 2018 : Debug: (0) Sent Access-Reject Id 74 from 192.168.122.1:1712 to 192.168.122.1:54017 length 20 Fri Jul 27 11:44:18 2018 : Debug: Waking up in 3.9 seconds. Fri Jul 27 11:44:22 2018 : Debug: (0) Cleaning up request packet ID 74 with timestamp +7 Fri Jul 27 11:44:22 2018 : Info: Ready to process requests Debugs passed case ------------------- Fri Jul 27 11:45:04 2018 : Debug: (0) Received Access-Request Id 175 from 192.168.122.1:39458 to 192.168.122.1:1812 length 75 Fri Jul 27 11:45:04 2018 : Debug: (0) User-Name = "agnel" Fri Jul 27 11:45:04 2018 : Debug: (0) User-Password = "cisco" Fri Jul 27 11:45:04 2018 : Debug: (0) NAS-IP-Address = 10.105.236.107 Fri Jul 27 11:45:04 2018 : Debug: (0) NAS-Port = 0 Fri Jul 27 11:45:04 2018 : Debug: (0) Message-Authenticator = 0x0e54f6497f8d7966db4f4702ec76a282 Fri Jul 27 11:45:04 2018 : Debug: (0) session-state: No State attribute Fri Jul 27 11:45:04 2018 : Debug: (0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default Fri Jul 27 11:45:04 2018 : Debug: (0) authorize { Fri Jul 27 11:45:04 2018 : Debug: (0) policy filter_username { Thanks, Agnel

2 3

rlm_sql_null holding locks and hanging radsqlrelay.
by Matthew Schumacher 01 Aug '18

01 Aug '18

List, I'm not sure what the deal with this is, but suddenly I'm struggling to make radsqlrelay work. Strace shows that it's waiting on a lock: rename("/var/log/radius/radacct/sql-relay", "/var/log/radius/radacct/sql-relay.work") = 0 open("/var/log/radius/radacct/sql-relay.work", O_RDWR) = 4 ioctl(4, TCGETS, 0x7ffdda2134c0) = -1 ENOTTY (Inappropriate ioctl for device) lseek(4, 0, SEEK_CUR) = 0 fstat(4, {st_mode=S_IFREG|0640, st_size=343, ...}) = 0 fcntl(4, F_SETFD, FD_CLOEXEC) = 0 fcntl(4, F_SETLKW, {l_type=F_WRLCK, l_whence=SEEK_SET, l_start=0, l_len=0} lslocks shows that radiusd has the file locked and radsqlrelay is waiting for it: radsqlrelay 13623 POSIX 343B WRITE* 0 0 0 /var/log/radius/radacct/sql-relay.work radiusd 13639 POSIX 343B WRITE 0 0 0 /var/log/radius/radacct/sql-relay.work Any ideas on how to resolve this? Shouldn't rlm_sql_null release the lock when it's done writing? Thanks, schu

2 1

How can I catch the bug?
by work vlpl 31 Jul '18

31 Jul '18

Hello, I am watching a bug, that is repeated periodically, and I can not easily reproduce it. Usually the request processed without any errors, but seldom one of requests may crash the server. Can someone give me hint how I can catch and reproduce it?. There is the part of log that show how bugs happens, sorry I have to redact some information from it. ``` (34) Received Access-Request Id 119 from REDACTED.IP.ADDRESS.0:53127 to REDACTED.RADIUS.IP.ADDRESS length 438 (34) Framed-MTU = 1480 (34) NAS-IP-Address = REDATED-NAS-IP (34) NAS-Identifier = "REDACTED-THE-NAS-ID" (34) User-Name = "REDACTED-THE-USER-NAME" (34) Service-Type = Framed-User (34) Framed-Protocol = PPP (34) NAS-Port = 6 (34) NAS-Port-Type = Ethernet (34) NAS-Port-Id = "6" (34) Called-Station-Id = "REDACTED-CALLED-STATION-ID" (34) Calling-Station-Id = "REDACTED-CALLING-STATION-ID" (34) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (34) Tunnel-Type:0 = VLAN (34) Tunnel-Medium-Type:0 = IEEE-802 (34) Tunnel-Private-Group-Id:0 = "1050" (34) State = 0x333753657373696f6e49443d4844514e4341435330332f3332303738393230342f3336303634383b (34) EAP-Message = 0x02fa00060319 (34) Message-Authenticator = 0xa3358ee8a08bde95cc268cd2ae49cef4 (34) MS-RAS-Vendor = 11 (34) HP-Capability-Advert = 0x011a0000000b28 (34) HP-Capability-Advert = 0x011a0000000b2e (34) HP-Capability-Advert = 0x011a0000000b30 (34) HP-Capability-Advert = 0x011a0000000b3d (34) HP-Capability-Advert = 0x011a0000000b18 (34) HP-Capability-Advert = 0x011a0000000b19 (34) HP-Capability-Advert = 0x0138 (34) HP-Capability-Advert = 0x013a (34) HP-Capability-Advert = 0x0140 (34) HP-Capability-Advert = 0x0141 (34) HP-Capability-Advert = 0x0151 (34) Restoring &session-state (34) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/virtualsite (34) authorize { (34) [preprocess] = ok (34) auth_log: EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d:%H (34) auth_log: --> /var/log/radius/radacct/REDACTED.IP.ADDRESS.0/auth-detail-20180721:09 (34) auth_log: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d:%H expands to /var/log/radius/radacct/REDACTED.IP.ADDRESS.0/auth-detail-20180721:09 (34) auth_log: EXPAND %t (34) auth_log: --> Sat Jul 21 09:19:06 2018 (34) [auth_log] = ok (34) update request { (34) Supplicant-Radius-Ip := REDACTED.IP.ADDRESS.0 (34) Supplicant-Radius-Port := REDACTED-PORT (34) Selected-EAP-Module := eap (34) } # update request = noop (34) [chap] = noop (34) [mschap] = noop *** authorize *** *************** authorize - 'reply:Supplicant-Use-Remote' := 'yes' authorize - 'reply:Supplicant-Proxy-Id' := 'REDACTED_PROXY_ID' authorize - 'reply:Supplicant-User-Name' := 'REDACTED-THE-USER-NAME' (34) [python_module_auth] = updated (34) if (updated){ (34) if (updated) -> TRUE (34) if (updated) { (34) update control { (34) No attributes updated (34) } # update control = noop (34) if (&reply:Supplicant-Use-Remote == 'yes') { (34) if (&reply:Supplicant-Use-Remote == 'yes') -> TRUE (34) if (&reply:Supplicant-Use-Remote == 'yes') { (34) update control { (34) Proxy-To-Realm := &reply:Supplicant-Proxy-Id -> 'REDACTED_PROXY_ID' (34) Cleartext-Password !* ANY (34) } # update control = noop (34) } # if (&reply:Supplicant-Use-Remote == 'yes') = noop (34) if (&reply:Supplicant-Use-Mac-Auth == 'yes') { (34) ERROR: Failed retrieving values required to evaluate condition (34) policy save_reply_to_session_state { (34) update session-state { ASSERT FAILED src/main/map.c[1112]: parent CAUGHT SIGNAL: Aborted Backtrace of last 24 frames: /usr/local/lib/libfreeradius-radius.so(fr_fault+0x115)[0x7f9a4d7e4566] /usr/local/lib/libfreeradius-server.so(rad_assert_fail+0x46)[0x7f9a4da43ff2] /usr/local/lib/libfreeradius-server.so(map_to_request+0x5cb)[0x7f9a4da3d174] /usr/local/sbin/radiusd[0x429867] /usr/local/sbin/radiusd[0x42922a] /usr/local/sbin/radiusd[0x42a14a] /usr/local/sbin/radiusd[0x42922a] /usr/local/sbin/radiusd[0x42a14a] /usr/local/sbin/radiusd[0x42922a] /usr/local/sbin/radiusd[0x42a14a] /usr/local/sbin/radiusd(modcall+0xa2)[0x42ae8f] /usr/local/sbin/radiusd(indexed_modcall+0x363)[0x42669f] /usr/local/sbin/radiusd(process_authorize+0x22)[0x42893f] /usr/local/sbin/radiusd(rad_authenticate+0x212)[0x410110] /usr/local/sbin/radiusd[0x43de39] /usr/local/sbin/radiusd[0x43ca8a] /usr/local/sbin/radiusd(request_receive+0x7c2)[0x43e6d5] /usr/local/sbin/radiusd[0x41882e] /usr/local/sbin/radiusd[0x4455ce] /usr/local/lib/libfreeradius-radius.so(fr_event_loop+0x5a8)[0x7f9a4d80bfe8] /usr/local/sbin/radiusd(radius_event_process+0x26)[0x4473cd] /usr/local/sbin/radiusd(main+0xc77)[0x431417] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7f9a4beb8445] /usr/local/sbin/radiusd[0x40eeb9] No panic action set Aborted ``` And there is the policy `save_reply_to_session_state` ``` save_reply_to_session_state { update session-state { Supplicant-User-Name := User-Name } } ``` The attributes that starts with 'Supplicant', are custom attributes, that I defined in dictionary. `*** authorize ***` it is debug output from `python_module_auth`, just to make it easier to find the right place in log. -- Vladimir

2 8

Acct-Status-Type = Stop have stopped logging to the SQL database.
by andy＠andyappel.com 30 Jul '18

30 Jul '18

Suddenly my records with “Acct-Status-Type = Stop” have stopped logging to the SQL database. I am seeing a success entry in the log but a query is not showing any ‘Stop' record. (1858) sql: SQL query returned: success (1858) sql: 1 record(s) updated If I restart the “freeradius” service some new ‘Stop' records briefly start appearing but then it stops. ‘Start’ records are working just fine. My though is that it is updating the ‘Start’ record and not creating a new ‘Stop’ entry when a session is ending as I am seeing ‘acctsessiontime’ values in my ‘Start’ records. Any suggestions would be appreciated. - FreeRADIUS Version 3.0.13 - mysql Ver 15.1 Distrib 5.5.56-MariaDB, for Linux (x86_64) using readline 5.1 - CentOS Linux release 7.5.1804 (Core thanks! -andy

4 4

RadPerf
by Dean Smith 30 Jul '18

30 Jul '18

I am using radperf to test a new FreeRadius 3.0.16 install. For network load balancing reasons, I would like the radius packets to have a good spread of source ports. Radperf (version 1.1b) appears to use the same source port for each test run. I there a way to have it use a random port for each request? Thanks Dean Smith

2 1

"Authentication realm is LOCAL" instead of my domain
by Benjamin DUPALUT 30 Jul '18

30 Jul '18

Hi everyone, I don't understand why freeradius set the authentication realm as LOCAL instead of my domain "esiee.fr". I had to add "realm LOCAL {}" in my proxy.conf file to make it work. root@radius:~# exitfreeradius -X FreeRADIUS Version 3.0.12 Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/eduroam_logging including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/linelog including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/cui.orig including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/accounting including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/eduroam main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server rad1.eduroam.fr { ipaddr = 193.49.160.187 port = 1812 type = "auth+acct" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server rad2.eduroam.fr { ipaddr = 193.49.159.82 port = 1812 type = "auth+acct" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } realm LOCAL { } realm esiee.fr { } home_server_pool pool-eduroam { type = fail-over home_server = rad1.eduroam.fr home_server = rad2.eduroam.fr } realm ~.+$ { pool = pool-eduroam nostrip } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client radtest.cru.fr { ipaddr = 195.220.94.130 require_message_authenticator = yes secret = <<< secret >>> shortname = "radtest.cru.fr" virtual_server = "eduroam" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client rad1.eduroam.fr { ipaddr = 193.49.160.187 netmask = 32 require_message_authenticator = yes secret = <<< secret >>> shortname = "rad1.eduroam.fr" virtual_server = "eduroam" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client rad2.eduroam.fr { ipaddr = 193.49.159.82 netmask = 32 require_message_authenticator = yes secret = <<< secret >>> shortname = "rad2.eduroam.fr" virtual_server = "eduroam" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.250.80.10 { ipaddr = 10.250.80.10 require_message_authenticator = yes secret = <<< secret >>> shortname = "DC2-B08-WIF01" virtual_server = "eduroam" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.250.80.11 { ipaddr = 10.250.80.11 require_message_authenticator = yes secret = <<< secret >>> shortname = "DC2-B08-WIF02" virtual_server = "eduroam" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = ntlm_auth # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_linelog # Loading module "f_ticks" from file /etc/freeradius/3.0/mods-enabled/eduroam_logging linelog f_ticks { filename = "syslog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "f_ticks.%{%{reply:Packet-Type}:-format}" } # Loading module "eduroam_log" from file /etc/freeradius/3.0/mods-enabled/eduroam_logging linelog eduroam_log { filename = "syslog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "eduroam_log.%{%{reply:Packet-Type}:-format}" } # Loading module "inner_auth_log" from file /etc/freeradius/3.0/mods-enabled/eduroam_logging linelog inner_auth_log { filename = "syslog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "inner_auth_log.%{%{reply:Packet-Type}:-format}" } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}" passchange { } allow_retry = yes } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=lan.esiee.fr --username=%{Stripped-User-Name} --password=%{User-Password}" shell_escape = yes } # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔÙÛÜ" } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } instantiate { } # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "f_ticks" from file /etc/freeradius/3.0/mods-enabled/eduroam_logging # Instantiating module "eduroam_log" from file /etc/freeradius/3.0/mods-enabled/eduroam_logging # Instantiating module "inner_auth_log" from file /etc/freeradius/3.0/mods-enabled/eduroam_logging # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): authenticating by calling 'ntlm_auth' # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/freeradius/3.0/certs/server.pem" certificate_file = "/etc/freeradius/3.0/certs/server.pem" ca_file = "/etc/freeradius/3.0/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} Ignoring "sql" (see raddb/mods-available/README.rst) } # server inner-tunnel server eduroam { # from file /etc/freeradius/3.0/sites-enabled/eduroam # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading pre-proxy {...} # Loading post-proxy {...} # Loading post-auth {...} } # server eduroam radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server eduroam Listening on acct address * port 1813 bound to server eduroam Listening on proxy address * port 48139 Ready to process requests (0) Received Access-Request Id 41 from 10.250.80.11:32777 to 147.215.150.39:1812 length 293 (0) User-Name = "anonyme(a)esiee.fr" (0) Chargeable-User-Identity = 0x00 (0) Location-Capable = Civix-Location (0) Calling-Station-Id = "c0-ee-fb-df-41-6f" (0) Called-Station-Id = "64-e9-50-af-53-f0:eduroam" (0) NAS-Port = 13 (0) Cisco-AVPair = "audit-session-id=0afa500b002579425b5ad27c" (0) Acct-Session-Id = "5b5ad27c/c0:ee:fb:df:41:6f/2024862" (0) NAS-IP-Address = 10.250.80.11 (0) NAS-Identifier = "DC1-B13-WIF01" (0) Airespace-Wlan-Id = 3 (0) Service-Type = Framed-User (0) Framed-MTU = 1300 (0) NAS-Port-Type = Wireless-802.11 (0) Tunnel-Type:0 = VLAN (0) Tunnel-Medium-Type:0 = IEEE-802 (0) Tunnel-Private-Group-Id:0 = "800" (0) EAP-Message = 0x0201001501616e6f6e796d654065736965652e6672 (0) Message-Authenticator = 0xb91a82d1336f44222d789d4a5f4dc467 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/eduroam (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) if (("%{client:shortname}" != "rad1.eduroam.fr") || ("%{client:shortname}" != "rad2-eduroam.fr")) { (0) EXPAND %{client:shortname} (0) --> DC2-B08-WIF02 (0) if (("%{client:shortname}" != "rad1.eduroam.fr") || ("%{client:shortname}" != "rad2-eduroam.fr")) -> TRUE (0) if (("%{client:shortname}" != "rad1.eduroam.fr") || ("%{client:shortname}" != "rad2-eduroam.fr")) { (0) update request { (0) &Operator-Name := "1esiee.fr" (0) } # update request = noop (0) } # if (("%{client:shortname}" != "rad1.eduroam.fr") || ("%{client:shortname}" != "rad2-eduroam.fr")) = noop (0) [preprocess] = ok (0) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (0) auth_log: --> /var/log/freeradius/radacct/ 10.250.80.11/auth-detail-20180727 (0) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.250.80.11/auth-detail-20180727 (0) auth_log: EXPAND %t (0) auth_log: --> Fri Jul 27 10:06:30 2018 (0) [auth_log] = ok (0) policy operator-name.authorize { (0) if ("%{client:Operator-Name}") { (0) EXPAND %{client:Operator-Name} (0) --> 1esiee.fr (0) if ("%{client:Operator-Name}") -> TRUE (0) if ("%{client:Operator-Name}") { (0) update request { (0) EXPAND %{client:Operator-Name} (0) --> 1esiee.fr (0) &Operator-Name = 1esiee.fr (0) } # update request = noop (0) } # if ("%{client:Operator-Name}") = noop (0) } # policy operator-name.authorize = noop (0) policy cui.authorize { (0) if ("%{client:add_cui}" == 'yes') { (0) EXPAND %{client:add_cui} (0) --> yes (0) if ("%{client:add_cui}" == 'yes') -> TRUE (0) if ("%{client:add_cui}" == 'yes') { (0) update request { (0) &Chargeable-User-Identity := 0x00 (0) } # update request = noop (0) } # if ("%{client:add_cui}" == 'yes') = noop (0) } # policy cui.authorize = noop (0) [chap] = noop (0) [mschap] = noop (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "esiee.fr" for User-Name = "anonyme(a)esiee.fr" (0) suffix: Found realm "esiee.fr" (0) suffix: Adding Stripped-User-Name = "anonyme" (0) suffix: Adding Realm = "esiee.fr" (0) suffix: Authentication realm is LOCAL (0) [suffix] = ok Thank you for your advices. Cordialement, *Benjamin Dupalut* Administrateur système et réseau Service Informatique, Télécommunications, Audiovisuel et Reprographie (SITAR) ESIEE Paris 2 bd Blaise Pascal - 93162 Noisy-le-Grand Cedex T : +33 1 45 92 66 17 benjamin.dupalut(a)esiee.fr www.esiee.fr / www.cci-paris-idf.fr

2 6

freeradius 3 - wifi eap authentication with many Calling-station-id
by Maksim Bessonov 30 Jul '18

30 Jul '18

Hi, i have FR 3 with mysql. There is no problem with one Calling-station-id - to wifi connects only with correct mac address. If i add new calling station id - no one authenticate. Is it possible to use more that one Calling-station-id? Thanks, Max (8) Received Access-Request Id 18 from 10.122.0.249:34692 to 10.250.0.89:1812 length 312 (8) Service-Type = Framed-User (8) Framed-MTU = 1400 (8) User-Name = "6696" (8) State = 0xcbcd84becdca9dacd4f4ff79700755f2 (8) NAS-Port-Id = "wlan3" (8) NAS-Port-Type = Wireless-802.11 (8) Acct-Session-Id = "82400151" (8) Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-5C-8D-4E-45-26-7E-82-40-00-00-00-00-00-A5" (8) Calling-Station-Id = "5C-8D-4E-45-26-7E" (8) Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (8) EAP-Message = 0x0207005e1900170303005347ebd30c192c0babeb6419ce6032bfaeb4e0918d9de607b49e6799da14f82658dc3d02f3e5989e1a07fd06fd09eacf152e87ee60baca2ff6c7c171f93f8bb93cf8a862b0f196cfafd11e39c69455139e4c5419 (8) Message-Authenticator = 0x25eb770a21eb5a60de3ca56f0b906f63 (8) NAS-Identifier = "MikroTik" (8) NAS-IP-Address = 10.122.0.249 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) [preprocess] = ok (8) eap: Peer sent EAP Response (code 2) ID 7 length 94 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x1f3ac4431f3dde51 (8) eap: Finished EAP session with state 0xcbcd84becdca9dac (8) eap: Previous EAP request found for state 0xcbcd84becdca9dac, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x0207003f1a0207003a31afa7e13313bb19ccd6a1da23ff37f5f000000000000000000ab6ae29d5f022051dcdf872befccba2dee354235cea2fc80036363936 (8) eap_peap: Setting User-Name to 6696 (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x0207003f1a0207003a31afa7e13313bb19ccd6a1da23ff37f5f000000000000000000ab6ae29d5f022051dcdf872befccba2dee354235cea2fc80036363936 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "6696" (8) eap_peap: State = 0x1f3ac4431f3dde519eae5f0eeffc795b (8) eap_peap: Service-Type = Framed-User (8) eap_peap: Framed-MTU = 1400 (8) eap_peap: NAS-Port-Id = "wlan3" (8) eap_peap: NAS-Port-Type = Wireless-802.11 (8) eap_peap: Acct-Session-Id = "82400151" (8) eap_peap: Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-5C-8D-4E-45-26-7E-82-40-00-00-00-00-00-A5" (8) eap_peap: Calling-Station-Id = "5C-8D-4E-45-26-7E" (8) eap_peap: Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (8) eap_peap: NAS-Identifier = "MikroTik" (8) eap_peap: NAS-IP-Address = 10.122.0.249 (8) eap_peap: Event-Timestamp = "Jul 25 2018 19:49:36 MSK" (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x0207003f1a0207003a31afa7e13313bb19ccd6a1da23ff37f5f000000000000000000ab6ae29d5f022051dcdf872befccba2dee354235cea2fc80036363936 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "6696" (8) State = 0x1f3ac4431f3dde519eae5f0eeffc795b (8) Service-Type = Framed-User (8) Framed-MTU = 1400 (8) NAS-Port-Id = "wlan3" (8) NAS-Port-Type = Wireless-802.11 (8) Acct-Session-Id = "82400151" (8) Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-5C-8D-4E-45-26-7E-82-40-00-00-00-00-00-A5" (8) Calling-Station-Id = "5C-8D-4E-45-26-7E" (8) Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (8) NAS-Identifier = "MikroTik" (8) NAS-IP-Address = 10.122.0.249 (8) Event-Timestamp = "Jul 25 2018 19:49:36 MSK" (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authorize { (8) foreach &control:Calling-Station-Id { (8) } # foreach &control:Calling-Station-Id = noop (8) [mschap] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 7 length 63 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) sql: EXPAND %{User-Name} (8) sql: --> 6696 (8) sql: SQL-User-Name set to '6696' rlm_sql (sql): Reserved connection (3) (8) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (8) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = '6696' ORDER BY id (8) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '6696' ORDER BY id (8) sql: User found in radcheck table (8) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (8) sql: --> SELECT groupname FROM radusergroup WHERE username = '6696' ORDER BY priority (8) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = '6696' ORDER BY priority (8) sql: User not found in any groups rlm_sql (sql): Released connection (3) (8) [sql] = noop (8) [expiration] = noop (8) [logintime] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0x1f3ac4431f3dde51 (8) eap: Finished EAP session with state 0x1f3ac4431f3dde51 (8) eap: Previous EAP request found for state 0x1f3ac4431f3dde51, released from the list (8) eap: Peer sent packet with method EAP MSCHAPv2 (26) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) eap_mschapv2: authenticate { (8) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (8) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password (8) mschap: Creating challenge hash with username: 6696 (8) mschap: Client is using MS-CHAPv2 (8) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication (8) mschap: ERROR: MS-CHAP2-Response is incorrect (8) [mschap] = reject (8) } # authenticate = reject (8) eap: Sending EAP Failure (code 4) ID 7 length 4 (8) eap: Freeing handler (8) [eap] = reject (8) } # authenticate = reject (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) Post-Auth-Type REJECT {

4 9

MS-CHAPv2 in FreeRADIUS
by Grit Wehner 29 Jul '18

29 Jul '18

Hi all, first of all sorry for my horrible english. My Question is as follows: With MS-CHAPv2 the client sends a peer-challenge, a nt-response and username to the server. Then the server calculates a challenge with help from the peer-challenge and the username of the client. I hope my understanding is correct so far. But what is the next step? Does FreeRADIUS decrypt the "client-nt-response" (encrypted challenge) and compares the result with its own calculated challenge? Or does it calculate its own "server-nt-response" and compares this to the received "client-nt-response"? I have found both possibilities in some documentations. I can not read source-code of programs (rlm_mschap) and RFCs are something for Developers only i think. Can someone help me please? Thank you very much. Greta

2 1

FreeRADIUS accounting to multiple destinations
by Алексей Морозенко 27 Jul '18

27 Jul '18

Hi to all, I'm using two fortigate instances in gcp for redundancy. Because of google restrictions I can't use them in HA mode so load-balancing does the trick for me. I have identical access policies on fortigates based on user group. User group is delivered to fortigates by RSSO (RADIUS SSO) by sending to them accounting packets. I use two FreeRADIUS 3.0.15 servers on Ubuntu 16.04 I have 3 LDAP modules for 3 LDAP servers in redundant-load-balance mode User can be in several groups so I edited /etc/freeradius/mods-config/files/pre-proxy to reflect group needed for me to assign access to user in Reply-Message attribute: DEFAULT ldap01-LDAP-Group == "cn=hr,cn=groups,cn=accounts,dc=office,dc=lan" Reply-Message := hr DEFAULT ldap02-LDAP-Group == "cn=hr,cn=groups,cn=accounts,dc=office,dc=lan" Reply-Message := hr DEFAULT ldap03-LDAP-Group == "cn=hr,cn=groups,cn=accounts,dc=office,dc=lan" Reply-Message := hr proxy.conf contains two pools with one server in it (fortigates which receive accounting packets) and two realms: home_server fortigate-vm01 { type = acct ipaddr = 10.10.15.192 ... } home_server fortigate-vm02 { type = acct ipaddr = 10.10.0.59 ... } home_server_pool fortigate-vm02 { home_server = fortigate-vm02 } home_server_pool fortinet-vms { home_server = fortigate-vm01 } realm DEFAULT { acct_pool = fortinet-vms } realm fortigate02 { acct_pool = fortigate-vm02 And I've enabled replicate module in server configuration: /etc/freeradius/sites-enabled/default: ... preacct { ... files *#(this enables sending reply with group name in Reply-Message attribute)* ... } accounting { ... replicate update control { Replicate-To-Realm := fortigate02 *#(this copies my accounting to second fortigate)* } ... } Finally, my problem. The problem is that I see accounting copy on second fortigate, *but without groups*. I realize that I replicate accounting to new realm and my pre-proxy file will not work for it so that't why I included in pre-proxy second file with that realm: /etc/freeradius/mods-config/files/pre-proxy: $INCLUDE /etc/freeradius/mods-config/files/pre-proxy.fortigate02 /etc/freeradius/mods-config/files/pre-proxy.fortigate02: fortigate02 ldap01-LDAP-Group == "cn=hr,cn=groups,cn=accounts,dc=office,dc=lan" Reply-Message := hr fortigate02 ldap02-LDAP-Group == "cn=hr,cn=groups,cn=accounts,dc=office,dc=lan" Reply-Message := hr fortigate02 ldap03-LDAP-Group == "cn=hr,cn=groups,cn=accounts,dc=office,dc=lan" Reply-Message := hr And this should work (I think). Or not? Tell me please, is my idea right for things I want to do? Should I use replicate module in accounting (as it's said in module description) or in preacct (besause i do group filtering and group attribute assigning in it)? Thanks. Best regards, Alex Morozenko

2 8

Re: Problem with HP devices & radius configuration
by Saurabh Lahoti 27 Jul '18

27 Jul '18

Dear, Many thanks for your kind help. Added the attribute to HP dictionary & issue resolved. Sincere apologies from my side for the wrong terminology. Thanks & Kind Regards, Saurabh LAHOTI.

1 0