- Freeradius-Users - lists.freeradius.org

Recommended value for ${db_dir} when using persist_dir
by George Benjin 08 Oct '24

08 Oct '24

I was about to enable persistent storage of sessions with FreeRADIUS 3.2.6 on RHEL 9.4 (installed from the NetworkRADIUS repo). The eap module states the following: The default directory is ${logdir}, for historical reasons. You should ${db_dir} instead. And check the value of db_dir in the main radiusd.conf file. It should not point to ${raddb}. I checked the value of db_dir in the radiusd.conf file as mentioned, and it is set to: ${raddbdir} which evaluates to /etc/raddb. The comment immediately above the line setting the value mentions that it should likely be set to ${localstatedir}/lib/radiusd. I haven't changed these settings from defaults. Should the radiusd.conf settings be updated in the default package, and/or should the guidance be made clearer? File excerpts below. Cheers -------------------------------------------------------------------------------- >From eap: # Simple directory-based storage of sessions. # Two files per session will be written, the SSL # state and the cached VPs. This will persist session # across server restarts. # # The default directory is ${logdir}, for historical # reasons. You should ${db_dir} instead. And check # the value of db_dir in the main radiusd.conf file. # It should not point to ${raddb} # # The server will need write perms, and the directory # should be secured from anyone else. You might want # a script to remove old files from here periodically: # # find ${logdir}/tlscache -mtime +2 -exec rm -f {} \; # # This feature REQUIRES "name" option be set above. # # persist_dir = "${logdir}/tlscache" ----------------------------------------------------------------------------- >From radiusd.conf: prefix = /usr exec_prefix = /usr sysconfdir = /etc localstatedir = /var sbindir = /usr/sbin logdir = ${localstatedir}/log/radius raddbdir = ${sysconfdir}/raddb radacctdir = ${logdir}/radacct # # name of the running server. See also the "-n" command-line option. name = radiusd # Location of config and logfiles. confdir = ${raddbdir} modconfdir = ${confdir}/mods-config certdir = ${confdir}/certs cadir = ${confdir}/certs run_dir = ${localstatedir}/run/${name} # Should likely be ${localstatedir}/lib/radiusd db_dir = ${raddbdir}

2 2

radmin stats home_server command always reporting zero requests
by paul.moser＠bt.com 03 Oct '24

03 Oct '24

I'm seeing the radmin stats home_server command with IP address and port arguments always report zero requests. The responses, last_packet and various elapsed metrics are incrementing as expected. Access and accounting requests both seem to be affected. I've rolled back to 3.2.4 and the requests metric increments as expected(*), but it does not with 3.2.5 or 3.2.6 The changelog for 3.2.5 does indicate that there was a bug fix around statistics: * Fix packet statistics. Stop double counting some packets, and track packet statistics even if a socket is closed. (*) My assumption is/was that the request metric should increment with every packet to be sent to a home server and that all things being good (no drops, in-flight packets etc) requests should equal responses (or rather responses should equal requests) but my understanding of what the requests metric is might not be correct. Paul

2 3

rest module to send simple API call to Infoblox for Mac Auth
by dominic.stalder＠unibe.ch 30 Sep '24

30 Sep '24

Hi guys Im am trying to combine (1) Mac Auth and (2) 802.1x on FreeRADIUS 3.2. So far, with simple check on a fixed Calling-Station-Id, it works. Now I would like to implement an GET API call to our IPAM (Infoblox) in the following format: https://xyz.domain.com/wapi/v2.11.3/record:host?network=172.25.8.0/21&mac=a… First things first, I enabled the rest module: ln -s ../mods-available/rest /etc/freeradius/mods-enabled/rest 1. With the default configuration, I get the following output: rlm_rest (rest): Opening additional connection (0), 1 of 32 pending slots used rlm_rest (rest): Connecting to http://127.0.0.1/ rlm_rest (rest): Connection failed: 7 - Couldn't connect to server rlm_rest (rest): Opening connection failed (0) rlm_rest (rest): Removing connection pool 2. When I comment the corresponding “connect_uri” like mentioned in the rest module comment, I get the next error: # rlm_rest will open a connection to the server specified in connect_uri # to populate the connection cache, ready for the first request. # The server will not start if the server specified is unreachable. # # If you wish to disable this pre-caching and reachability check, # comment out the configuration item below. # connect_uri = http://127.0.0.1/ including configuration file /etc/freeradius/sites-enabled/control-socket /etc/freeradius/mods-enabled/rest[188]: Reference "${..connect_uri}" not found Errors reading or parsing /etc/freeradius/radiusd.conf As I stated, I would like to start very simple and go step by step from there because I have absolutely no clue how to implement the requested API call so far. But if anyone has a hint to “overcome” this error and maybe has a simple example of an GET API call, I would appreciate. Thanks and best regards Dominic _________________________________ Universität Bern Abteilung Informatikdienste Dominic Stalder Network Engineer Hochschulstrasse 6 CH-3012 Bern Tel. +41 (0)31 684 38 18 dominic.stalder(a)unibe.ch<mailto:dominic.stalder@unibe.ch> www.id.unibe.ch _________________________________

3 12

MAC Authentication Queries
by FreeRAD 27 Sep '24

27 Sep '24

Hi Team, I have recently set up MAC Authentication to happen before my EAP authentication takes over and just had some questions about the configuration I used (found here <https://wiki.freeradius.org/guide/Mac-Auth>). The page states that you should use the below configuration to make this work: if (!ok) { # Reject if the MAC address was not permitted. reject } # If this is NOT 802.1x, mac-auth if (!EAP-Message) { # MAC address has already been checked, so accept update control { Auth-Type := Accept } } else { # Normal FreeRADIUS virtual server config goes here e.g. eap } } But seemingly whenever I enclose the rest of my Authorize config within the final 'else' statement I get an error: */etc/freeradius/3.0/sites-enabled/default[526]: Failed to find "Autz-Type" as a module or policy./etc/freeradius/3.0/sites-enabled/default[526]: Please verify that the configuration exists in /etc/freeradius/3.0/mods-enabled/Autz-Type./etc/freeradius/3.0/sites-enabled/default[526]: Failed to parse "Autz-Type" subsection./etc/freeradius/3.0/sites-enabled/default[285]: Errors parsing authorize section. * If I then take out the 'else' entirely, the error then disappears and my server seems to work fine. It performs the MAC auth, then goes through to doing the EAP-TTLS auth. My question is, is removing the else going to cause issues, and if so, how can I get around my error? Many thanks!

2 13

EAP-TLS certificate untrusted
by Etienne Muesse 27 Sep '24

27 Sep '24

Hi all, I am trying to use freeradius with EAP-TLS but the client certificates are not trusted. We are using client certificates which are signed by our internal CA (signing chain is: client <- int-ca <- root-ca) Here is what I did: - Put the root CA and intermediate CA into "ca_path". - Set server.pem (issued by intermediate CA) - Set key.pem - Disable CRL/OCSP checks (for testing). The result when a client connects: /Certificate chain - 1 intermediate CA cert(s) untrusted To forbid these certificates see 'reject_unknown_intermediate_ca' (TLS) untrusted certificate with depth [2] subject name [ROOT CA CERTIFICATE] (TLS) untrusted certificate with depth [1] subject name [INT CA CERTIFICATE] (TLS) untrusted certificate with depth [0] subject name [CLIENT CERTIFICATE] tls: There are untrusted certificates in the certificate chain. Rejecting. (12) eap_tls: ERROR: (TLS) TLS - Alert write:fatal:internal error (12) eap_tls: ERROR: (TLS) TLS - Server : Error in error (12) eap_tls: ERROR: (TLS) Failed reading from OpenSSL: error:0A000086:SSL routines::certificate verify failed (12) eap_tls: ERROR: (TLS) System call (I/O) error (-1) (12) eap_tls: ERROR: (TLS) EAP Receive handshake failed during operation (12) eap_tls: ERROR: [eaptls process] = fail/ I also tried to chain the CA files or put the whole chain into the client certificate. When I try to verify with openssl, it works fine: openssl verify -CApath certs/ca certs/client.pem Using FreeRADIUS Version 3.2.4 Am I missing something? Best regards, Etienne

2 2

TLS 1.3 enabled or not?
by Luca Borruto 27 Sep '24

27 Sep '24

Hi everyone! Have you enabled TLS 1.3 in your configuration? I read somewhere it can cause issues, but we mostly use recent Windows and macOS machines, and I was wondering if we could benefit from it. tls_min_version = 1.2 tls_max_version = 1.3 Thanks !

3 2

Investigating Slow RADIUS Proxy Request
by Vedsar Kushwaha 27 Sep '24

27 Sep '24

I have a few questions about how the FreeRADIUS proxy handles requests: 1. When proxying a request, does a FreeRADIUS thread remain blocked until a response is received from the home server? 2. Does the max_outstanding flag apply only to health status checks, or does it affect all requests proxied to the home server? * If a FreeRADIUS thread blocks while waiting for a response, does increasing max_outstanding to a high value like 65536 actually allow FreeRADIUS to send that many outstanding requests? Or is the number of threads the limiting factor? * If a proxy request doesn't block a thread, how does FreeRADIUS listen for responses from the home server? 1. We have a request that took 40 minutes to proxy. The snippet below, along with the complete log, shows the details. We're trying to investigate the cause of this delay. ``` 2024-09-17T13:05:52.495Z (44469) Starting proxy to home server 129.170.130.4 port 2083 2024-09-17T13:05:52.495Z (44469) server VS_P_790be815-af8f-4dc5-b8c2-e01b8a107db4 { 2024-09-17T13:05:52.495Z (44469) } 2024-09-17T13:46:55.967Z (44469) Proxying request to home server 129.170.130.4 port 2083 (TLS) timeout 30.000000 ``` Juniper Business Use Only

2 1

Consult accounting-reponse related issues
by 杨思雷 27 Sep '24

27 Sep '24

Hi， When proxying a accounting-request, does FreeRadius must listen for responses from the home server? If I only want the Freeradius proxy accounting-request to the home server, and do not care of the respose, what can I do?

2 1

Issue with 3.2.6 - dies/stops serving but is still running/listening on port
by James Wood 27 Sep '24

27 Sep '24

Since upgrading to 3.2.6 we're seeing an issue where the radiusd program just "dies" and stops receiving/handling requests, yet the program itself is still running, has a PID, and netstat shows it's still listening on the ports. I can see the requests still reaching the machine via tcpdump but nothing from radiusd. We're using TLS to support EAP connections but no clients are using TLS on this particular server so it's all UDP, though TLS is still enabled and listening. OpenSSL version is 3.0.2 I've included some logs from what little I know about gdb and wondered if anyone can advise the likely culprit of the issue. The last entries in radius.log were normal authentications and then it just died and stopped receiving requests. I've also observed the same in debug mode, nothing is showing untoward in the output on screen before it dies. Thu Sep 26 06:49:13 2024 : Info: ... adding new socket auth+acct from client (redacted, 33981) -> (*, 2083, virtual-server=default) Thu Sep 26 06:49:13 2024 : Auth: (328802) Login OK: [redacted] (from client 209.206.60.101 port 0 cli redacted) Thu Sep 26 06:49:14 2024 : Auth: (328809) Login OK: [redacted] (from client 209.206.60.101 port 0 cli redacted) Thu Sep 26 06:49:14 2024 : Auth: (328814) Login OK: [redacted] (from client 209.206.60.101 port 0 cli redacted) Thu Sep 26 06:49:18 2024 : Auth: (328835) Login OK: [redacted] (from client 209.206.60.101 port 0 cli redacted) --- (gdb) bt #0 futex_wait (private=0, expected=2, futex_word=0x572a56ee9c88) at ../sysdeps/nptl/futex-internal.h:146 #1 __GI___lll_lock_wait (futex=futex@entry=0x572a56ee9c88, private=0) at ./nptl/lowlevellock.c:49 #2 0x00007fc3d5098002 in lll_mutex_lock_optimized (mutex=0x572a56ee9c88) at ./nptl/pthread_mutex_lock.c:48 #3 ___pthread_mutex_lock (mutex=mutex@entry=0x572a56ee9c88) at ./nptl/pthread_mutex_lock.c:93 #4 0x0000572a546bfc05 in tls_socket_recv (listener=0x572a56e6f710) at src/main/tls_listen.c:476 #5 dual_tls_recv (listener=0x572a56e6f710) at src/main/tls_listen.c:732 #6 0x00007fc3d59aaee4 in fr_event_loop (el=0x572a56ab72f0) at src/lib/event.c:713 #7 0x0000572a546af1d5 in radius_event_process () at src/main/process.c:6565 #8 0x0000572a546834bc in main (argc=<optimized out>, argv=<optimized out>) at src/main/radiusd.c:641 --- (gdb) info threads Id Target Id Frame * 1 Thread 0x7fc3d5850c00 (LWP 837582) "radiusd" futex_wait (private=0, expected=2, futex_word=0x572a56ee9c88) at ../sysdeps/nptl/futex-internal.h:146 2 Thread 0x7fc3d15f5640 (LWP 922309) "radiusd" __futex_abstimed_wait_common64 (private=<optimized out>, cancel=true, abstime=0x0, op=393, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:57 3 Thread 0x7fc3cd5ed640 (LWP 922310) "radiusd" __futex_abstimed_wait_common64 (private=<optimized out>, cancel=true, abstime=0x0, op=393, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:57 4 Thread 0x7fc3d1df6640 (LWP 922311) "radiusd" __futex_abstimed_wait_common64 (private=<optimized out>, cancel=true, abstime=0x0, op=393, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:57 5 Thread 0x7fc39e7fc640 (LWP 922312) "radiusd" __futex_abstimed_wait_common64 (private=<optimized out>, cancel=true, abstime=0x0, op=393, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:57 6 Thread 0x7fc3cf5f1640 (LWP 922313) "radiusd" __futex_abstimed_wait_common64 (private=<optimized out>, cancel=true, abstime=0x0, op=393, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:57 7 Thread 0x7fc3cedf0640 (LWP 922314) "radiusd" __futex_abstimed_wait_common64 (private=<optimized out>, cancel=true, abstime=0x0, op=393, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:57 8 Thread 0x7fc3957fa640 (LWP 922315) "radiusd" __futex_abstimed_wait_common64 (private=<optimized out>, cancel=true, abstime=0x0, op=393, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:57 9 Thread 0x7fc387fff640 (LWP 922316) "radiusd" __futex_abstimed_wait_common64 (private=<optimized out>, cancel=true, abstime=0x0, op=393, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:57 10 Thread 0x7fc3cfdf2640 (LWP 922317) "radiusd" __futex_abstimed_wait_common64 (private=<optimized out>, cancel=true, abstime=0x0, op=393, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:57 --- Thread 10 (Thread 0x7fc3cfdf2640 (LWP 922317) "radiusd"): #0 __futex_abstimed_wait_common64 (private=<optimized out>, cancel=true, abstime=0x0, op=393, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:57 sc_cancel_oldtype = 0 sc_ret = <optimized out> resultvar = <optimized out> __arg6 = <optimized out> __arg5 = <optimized out> __arg4 = <optimized out> __arg3 = <optimized out> __arg2 = <optimized out> __arg1 = <optimized out> _a6 = <optimized out> _a5 = <optimized out> _a4 = <optimized out> _a3 = <optimized out> _a2 = <optimized out> _a1 = <optimized out> #1 __futex_abstimed_wait_common (cancel=true, private=<optimized out>, abstime=0x0, clockid=0, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:87 err = <optimized out> clockbit = 256 op = 393 err = <optimized out> clockbit = <optimized out> op = <optimized out> #2 __GI___futex_abstimed_wait_cancelable64 (futex_word=futex_word@entry=0x572a546f13e8 <thread_pool+168>, expected=expected@entry=0, clockid=clockid@entry=0, abstime=abstime@entry=0x0, private=<optimized out>) at ./nptl/futex-internal.c:139 No locals. #3 0x00007fc3d509cbdf in do_futex_wait (sem=sem@entry=0x572a546f13e8 <thread_pool+168>, abstime=0x0, clockid=0) at ./nptl/sem_waitcommon.c:111 err = <optimized out> #4 0x00007fc3d509cc78 in __new_sem_wait_slow64 (sem=sem@entry=0x572a546f13e8 <thread_pool+168>, abstime=0x0, clockid=0) at ./nptl/sem_waitcommon.c:183 _buffer = {__routine = 0x7fc3d509cbb0 <__sem_wait_cleanup>, __arg = 0x572a546f13e8 <thread_pool+168>, __canceltype = 1459787472, __prev = 0x0} err = <optimized out> d = 34359738368 #5 0x00007fc3d509ccf1 in __new_sem_wait (sem=sem@entry=0x572a546f13e8 <thread_pool+168>) at ./nptl/sem_wait.c:42 No locals. #6 0x0000572a546a5080 in request_handler_thread (arg=0x572a570098c0) at src/main/threads.c:741 self = 0x572a570098c0 re_wait = <optimized out> #7 0x00007fc3d5094ac3 in start_thread (arg=<optimized out>) at ./nptl/pthread_create.c:442 ret = <optimized out> pd = <optimized out> out = <optimized out> unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140720694236800, -4619313545745495514, 140478982858304, 0, 140479069505488, 140720694237152, 4639685579648305702, 4639636563766184486}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}} not_first_call = <optimized out> #8 0x00007fc3d5126850 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 No locals. Thread 9 (Thread 0x7fc387fff640 (LWP 922316) "radiusd"): #0 __futex_abstimed_wait_common64 (private=<optimized out>, cancel=true, abstime=0x0, op=393, expected=0, futex_word=0x572a546f1--Type <RET> for more, q to quit, c to continue without paging--c 3e8 <thread_pool+168>) at ./nptl/futex-internal.c:57 sc_cancel_oldtype = 0 sc_ret = <optimized out> resultvar = <optimized out> __arg6 = <optimized out> __arg5 = <optimized out> __arg4 = <optimized out> __arg3 = <optimized out> __arg2 = <optimized out> __arg1 = <optimized out> _a6 = <optimized out> _a5 = <optimized out> _a4 = <optimized out> _a3 = <optimized out> _a2 = <optimized out> _a1 = <optimized out> #1 __futex_abstimed_wait_common (cancel=true, private=<optimized out>, abstime=0x0, clockid=0, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:87 err = <optimized out> clockbit = 256 op = 393 err = <optimized out> clockbit = <optimized out> op = <optimized out> #2 __GI___futex_abstimed_wait_cancelable64 (futex_word=futex_word@entry=0x572a546f13e8 <thread_pool+168>, expected=expected@entry=0, clockid=clockid@entry=0, abstime=abstime@entry=0x0, private=<optimized out>) at ./nptl/futex-internal.c:139 No locals. #3 0x00007fc3d509cbdf in do_futex_wait (sem=sem@entry=0x572a546f13e8 <thread_pool+168>, abstime=0x0, clockid=0) at ./nptl/sem_waitcommon.c:111 err = <optimized out> #4 0x00007fc3d509cc78 in __new_sem_wait_slow64 (sem=sem@entry=0x572a546f13e8 <thread_pool+168>, abstime=0x0, clockid=0) at ./nptl/sem_waitcommon.c:183 _buffer = {__routine = 0x7fc3d509cbb0 <__sem_wait_cleanup>, __arg = 0x572a546f13e8 <thread_pool+168>, __canceltype = 1458253584, __prev = 0x0} err = <optimized out> d = 34359738368 #5 0x00007fc3d509ccf1 in __new_sem_wait (sem=sem@entry=0x572a546f13e8 <thread_pool+168>) at ./nptl/sem_wait.c:42 No locals. #6 0x0000572a546a5080 in request_handler_thread (arg=0x572a56e99c30) at src/main/threads.c:741 self = 0x572a56e99c30 re_wait = <optimized out> #7 0x00007fc3d5094ac3 in start_thread (arg=<optimized out>) at ./nptl/pthread_create.c:442 ret = <optimized out> pd = <optimized out> out = <optimized out> unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140720694236800, -4619313545745495514, 140477777049152, 0, 140479069505488, 140720694237152, 4639808443093387814, 4639636563766184486}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}} not_first_call = <optimized out> #8 0x00007fc3d5126850 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 No locals. Thread 8 (Thread 0x7fc3957fa640 (LWP 922315) "radiusd"): #0 __futex_abstimed_wait_common64 (private=<optimized out>, cancel=true, abstime=0x0, op=393, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:57 sc_cancel_oldtype = 0 sc_ret = <optimized out> resultvar = <optimized out> __arg6 = <optimized out> __arg5 = <optimized out> __arg4 = <optimized out> __arg3 = <optimized out> __arg2 = <optimized out> __arg1 = <optimized out> _a6 = <optimized out> _a5 = <optimized out> _a4 = <optimized out> _a3 = <optimized out> _a2 = <optimized out> _a1 = <optimized out> #1 __futex_abstimed_wait_common (cancel=true, private=<optimized out>, abstime=0x0, clockid=0, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:87 err = <optimized out> clockbit = 256 op = 393 err = <optimized out> clockbit = <optimized out> op = <optimized out> #2 __GI___futex_abstimed_wait_cancelable64 (futex_word=futex_word@entry=0x572a546f13e8 <thread_pool+168>, expected=expected@entry=0, clockid=clockid@entry=0, abstime=abstime@entry=0x0, private=<optimized out>) at ./nptl/futex-internal.c:139 No locals. #3 0x00007fc3d509cbdf in do_futex_wait (sem=sem@entry=0x572a546f13e8 <thread_pool+168>, abstime=0x0, clockid=0) at ./nptl/sem_waitcommon.c:111 err = <optimized out> #4 0x00007fc3d509cc78 in __new_sem_wait_slow64 (sem=sem@entry=0x572a546f13e8 <thread_pool+168>, abstime=0x0, clockid=0) at ./nptl/sem_waitcommon.c:183 _buffer = {__routine = 0x7fc3d509cbb0 <__sem_wait_cleanup>, __arg = 0x572a546f13e8 <thread_pool+168>, __canceltype = 1458253568, __prev = 0x0} err = <optimized out> d = 34359738368 #5 0x00007fc3d509ccf1 in __new_sem_wait (sem=sem@entry=0x572a546f13e8 <thread_pool+168>) at ./nptl/sem_wait.c:42 No locals. #6 0x0000572a546a5080 in request_handler_thread (arg=0x572a56f07cd0) at src/main/threads.c:741 self = 0x572a56f07cd0 re_wait = <optimized out> #7 0x00007fc3d5094ac3 in start_thread (arg=<optimized out>) at ./nptl/pthread_create.c:442 ret = <optimized out> pd = <optimized out> out = <optimized out> unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140720694236800, -4619313545745495514, 140478003521088, 0, 140479069505488, 140720694237152, 4639776559940536870, 4639636563766184486}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}} not_first_call = <optimized out> #8 0x00007fc3d5126850 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 No locals. Thread 7 (Thread 0x7fc3cedf0640 (LWP 922314) "radiusd"): #0 __futex_abstimed_wait_common64 (private=<optimized out>, cancel=true, abstime=0x0, op=393, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:57 sc_cancel_oldtype = 0 sc_ret = <optimized out> resultvar = <optimized out> __arg6 = <optimized out> __arg5 = <optimized out> __arg4 = <optimized out> __arg3 = <optimized out> __arg2 = <optimized out> __arg1 = <optimized out> _a6 = <optimized out> _a5 = <optimized out> _a4 = <optimized out> _a3 = <optimized out> _a2 = <optimized out> _a1 = <optimized out> #1 __futex_abstimed_wait_common (cancel=true, private=<optimized out>, abstime=0x0, clockid=0, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:87 err = <optimized out> clockbit = 256 op = 393 err = <optimized out> clockbit = <optimized out> op = <optimized out> #2 __GI___futex_abstimed_wait_cancelable64 (futex_word=futex_word@entry=0x572a546f13e8 <thread_pool+168>, expected=expected@entry=0, clockid=clockid@entry=0, abstime=abstime@entry=0x0, private=<optimized out>) at ./nptl/futex-internal.c:139 No locals. #3 0x00007fc3d509cbdf in do_futex_wait (sem=sem@entry=0x572a546f13e8 <thread_pool+168>, abstime=0x0, clockid=0) at ./nptl/sem_waitcommon.c:111 err = <optimized out> #4 0x00007fc3d509cc78 in __new_sem_wait_slow64 (sem=sem@entry=0x572a546f13e8 <thread_pool+168>, abstime=0x0, clockid=0) at ./nptl/sem_waitcommon.c:183 _buffer = {__routine = 0x7fc3d509cbb0 <__sem_wait_cleanup>, __arg = 0x572a546f13e8 <thread_pool+168>, __canceltype = 1458225792, __prev = 0x0} err = <optimized out> d = 34359738368 #5 0x00007fc3d509ccf1 in __new_sem_wait (sem=sem@entry=0x572a546f13e8 <thread_pool+168>) at ./nptl/sem_wait.c:42 No locals. #6 0x0000572a546a5080 in request_handler_thread (arg=0x572a56e8f190) at src/main/threads.c:741 self = 0x572a56e8f190 re_wait = <optimized out> #7 0x00007fc3d5094ac3 in start_thread (arg=<optimized out>) at ./nptl/pthread_create.c:442 ret = <optimized out> pd = <optimized out> out = <optimized out> unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140720694236800, -4619313545745495514, 140478966072896, 0, 140479069505488, 140720694237152, 4639687762565433894, 4639636563766184486}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}} not_first_call = <optimized out> #8 0x00007fc3d5126850 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 No locals. Thread 6 (Thread 0x7fc3cf5f1640 (LWP 922313) "radiusd"): #0 __futex_abstimed_wait_common64 (private=<optimized out>, cancel=true, abstime=0x0, op=393, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:57 sc_cancel_oldtype = 0 sc_ret = <optimized out> resultvar = <optimized out> __arg6 = <optimized out> __arg5 = <optimized out> __arg4 = <optimized out> __arg3 = <optimized out> __arg2 = <optimized out> __arg1 = <optimized out> _a6 = <optimized out> _a5 = <optimized out> _a4 = <optimized out> _a3 = <optimized out> _a2 = <optimized out> _a1 = <optimized out> #1 __futex_abstimed_wait_common (cancel=true, private=<optimized out>, abstime=0x0, clockid=0, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:87 err = <optimized out> clockbit = 256 op = 393 err = <optimized out> clockbit = <optimized out> op = <optimized out> #2 __GI___futex_abstimed_wait_cancelable64 (futex_word=futex_word@entry=0x572a546f13e8 <thread_pool+168>, expected=expected@entry=0, clockid=clockid@entry=0, abstime=abstime@entry=0x0, private=<optimized out>) at ./nptl/futex-internal.c:139 No locals. #3 0x00007fc3d509cbdf in do_futex_wait (sem=sem@entry=0x572a546f13e8 <thread_pool+168>, abstime=0x0, clockid=0) at ./nptl/sem_waitcommon.c:111 err = <optimized out> #4 0x00007fc3d509cc78 in __new_sem_wait_slow64 (sem=sem@entry=0x572a546f13e8 <thread_pool+168>, abstime=0x0, clockid=0) at ./nptl/sem_waitcommon.c:183 _buffer = {__routine = 0x7fc3d509cbb0 <__sem_wait_cleanup>, __arg = 0x572a546f13e8 <thread_pool+168>, __canceltype = 1459750864, __prev = 0x0} err = <optimized out> d = 34359738368 #5 0x00007fc3d509ccf1 in __new_sem_wait (sem=sem@entry=0x572a546f13e8 <thread_pool+168>) at ./nptl/sem_wait.c:42 No locals. #6 0x0000572a546a5080 in request_handler_thread (arg=0x572a56e68d40) at src/main/threads.c:741 self = 0x572a56e68d40 re_wait = <optimized out> #7 0x00007fc3d5094ac3 in start_thread (arg=<optimized out>) at ./nptl/pthread_create.c:442 ret = <optimized out> pd = <optimized out> out = <optimized out> unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140720694236800, -4619313545745495514, 140478974465600, 0, 140479069505488, 140720694237152, 4639684480673548838, 4639636563766184486}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}} not_first_call = <optimized out> #8 0x00007fc3d5126850 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 No locals. Thread 5 (Thread 0x7fc39e7fc640 (LWP 922312) "radiusd"): #0 __futex_abstimed_wait_common64 (private=<optimized out>, cancel=true, abstime=0x0, op=393, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:57 sc_cancel_oldtype = 0 sc_ret = <optimized out> resultvar = <optimized out> __arg6 = <optimized out> __arg5 = <optimized out> __arg4 = <optimized out> __arg3 = <optimized out> __arg2 = <optimized out> __arg1 = <optimized out> _a6 = <optimized out> _a5 = <optimized out> _a4 = <optimized out> _a3 = <optimized out> _a2 = <optimized out> _a1 = <optimized out> #1 __futex_abstimed_wait_common (cancel=true, private=<optimized out>, abstime=0x0, clockid=0, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:87 err = <optimized out> clockbit = 256 op = 393 err = <optimized out> clockbit = <optimized out> op = <optimized out> #2 __GI___futex_abstimed_wait_cancelable64 (futex_word=futex_word@entry=0x572a546f13e8 <thread_pool+168>, expected=expected@entry=0, clockid=clockid@entry=0, abstime=abstime@entry=0x0, private=<optimized out>) at ./nptl/futex-internal.c:139 No locals. #3 0x00007fc3d509cbdf in do_futex_wait (sem=sem@entry=0x572a546f13e8 <thread_pool+168>, abstime=0x0, clockid=0) at ./nptl/sem_waitcommon.c:111 err = <optimized out> #4 0x00007fc3d509cc78 in __new_sem_wait_slow64 (sem=sem@entry=0x572a546f13e8 <thread_pool+168>, abstime=0x0, clockid=0) at ./nptl/sem_waitcommon.c:183 _buffer = {__routine = 0x7fc3d509cbb0 <__sem_wait_cleanup>, __arg = 0x572a546f13e8 <thread_pool+168>, __canceltype = 1458253728, __prev = 0x0} err = <optimized out> d = 34359738368 #5 0x00007fc3d509ccf1 in __new_sem_wait (sem=sem@entry=0x572a546f13e8 <thread_pool+168>) at ./nptl/sem_wait.c:42 No locals. #6 0x0000572a546a5080 in request_handler_thread (arg=0x572a56eee150) at src/main/threads.c:741 self = 0x572a56eee150 re_wait = <optimized out> #7 0x00007fc3d5094ac3 in start_thread (arg=<optimized out>) at ./nptl/pthread_create.c:442 ret = <optimized out> pd = <optimized out> out = <optimized out> unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140720694236800, -4619313545745495514, 140478154524224, 0, 140479069505488, 140720694237152, 4639791952029583910, 4639636563766184486}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}} not_first_call = <optimized out> #8 0x00007fc3d5126850 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 No locals. Thread 4 (Thread 0x7fc3d1df6640 (LWP 922311) "radiusd"): #0 __futex_abstimed_wait_common64 (private=<optimized out>, cancel=true, abstime=0x0, op=393, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:57 sc_cancel_oldtype = 0 sc_ret = <optimized out> resultvar = <optimized out> __arg6 = <optimized out> __arg5 = <optimized out> __arg4 = <optimized out> __arg3 = <optimized out> __arg2 = <optimized out> __arg1 = <optimized out> _a6 = <optimized out> _a5 = <optimized out> _a4 = <optimized out> _a3 = <optimized out> _a2 = <optimized out> _a1 = <optimized out> #1 __futex_abstimed_wait_common (cancel=true, private=<optimized out>, abstime=0x0, clockid=0, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:87 err = <optimized out> clockbit = 256 op = 393 err = <optimized out> clockbit = <optimized out> op = <optimized out> #2 __GI___futex_abstimed_wait_cancelable64 (futex_word=futex_word@entry=0x572a546f13e8 <thread_pool+168>, expected=expected@entry=0, clockid=clockid@entry=0, abstime=abstime@entry=0x0, private=<optimized out>) at ./nptl/futex-internal.c:139 No locals. #3 0x00007fc3d509cbdf in do_futex_wait (sem=sem@entry=0x572a546f13e8 <thread_pool+168>, abstime=0x0, clockid=0) at ./nptl/sem_waitcommon.c:111 err = <optimized out> #4 0x00007fc3d509cc78 in __new_sem_wait_slow64 (sem=sem@entry=0x572a546f13e8 <thread_pool+168>, abstime=0x0, clockid=0) at ./nptl/sem_waitcommon.c:183 _buffer = {__routine = 0x7fc3d509cbb0 <__sem_wait_cleanup>, __arg = 0x572a546f13e8 <thread_pool+168>, __canceltype = 1458225760, __prev = 0x0} err = <optimized out> d = 34359738368 #5 0x00007fc3d509ccf1 in __new_sem_wait (sem=sem@entry=0x572a546f13e8 <thread_pool+168>) at ./nptl/sem_wait.c:42 No locals. #6 0x0000572a546a5080 in request_handler_thread (arg=0x572a56eab860) at src/main/threads.c:741 self = 0x572a56eab860 re_wait = <optimized out> #7 0x00007fc3d5094ac3 in start_thread (arg=<optimized out>) at ./nptl/pthread_create.c:442 ret = <optimized out> pd = <optimized out> out = <optimized out> unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140720694236800, -4619313545745495514, 140479016429120, 0, 140479069505488, 140720694237152, 4639628402896177702, 4639636563766184486}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}} not_first_call = <optimized out> #8 0x00007fc3d5126850 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 No locals. Thread 3 (Thread 0x7fc3cd5ed640 (LWP 922310) "radiusd"): #0 __futex_abstimed_wait_common64 (private=<optimized out>, cancel=true, abstime=0x0, op=393, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:57 sc_cancel_oldtype = 0 sc_ret = <optimized out> resultvar = <optimized out> __arg6 = <optimized out> __arg5 = <optimized out> __arg4 = <optimized out> __arg3 = <optimized out> __arg2 = <optimized out> __arg1 = <optimized out> _a6 = <optimized out> _a5 = <optimized out> _a4 = <optimized out> _a3 = <optimized out> _a2 = <optimized out> _a1 = <optimized out> #1 __futex_abstimed_wait_common (cancel=true, private=<optimized out>, abstime=0x0, clockid=0, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:87 err = <optimized out> clockbit = 256 op = 393 err = <optimized out> clockbit = <optimized out> op = <optimized out> #2 __GI___futex_abstimed_wait_cancelable64 (futex_word=futex_word@entry=0x572a546f13e8 <thread_pool+168>, expected=expected@entry=0, clockid=clockid@entry=0, abstime=abstime@entry=0x0, private=<optimized out>) at ./nptl/futex-internal.c:139 No locals. #3 0x00007fc3d509cbdf in do_futex_wait (sem=sem@entry=0x572a546f13e8 <thread_pool+168>, abstime=0x0, clockid=0) at ./nptl/sem_waitcommon.c:111 err = <optimized out> #4 0x00007fc3d509cc78 in __new_sem_wait_slow64 (sem=sem@entry=0x572a546f13e8 <thread_pool+168>, abstime=0x0, clockid=0) at ./nptl/sem_waitcommon.c:183 _buffer = {__routine = 0x7fc3d509cbb0 <__sem_wait_cleanup>, __arg = 0x572a546f13e8 <thread_pool+168>, __canceltype = 1459269632, __prev = 0x0} err = <optimized out> d = 34359738368 #5 0x00007fc3d509ccf1 in __new_sem_wait (sem=sem@entry=0x572a546f13e8 <thread_pool+168>) at ./nptl/sem_wait.c:42 No locals. #6 0x0000572a546a5080 in request_handler_thread (arg=0x572a56ec83f0) at src/main/threads.c:741 self = 0x572a56ec83f0 re_wait = <optimized out> #7 0x00007fc3d5094ac3 in start_thread (arg=<optimized out>) at ./nptl/pthread_create.c:442 ret = <optimized out> pd = <optimized out> out = <optimized out> unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140720694236800, -4619313545745495514, 140478940894784, 0, 140479069505488, 140720694237152, 4639688863687674406, 4639636563766184486}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}} not_first_call = <optimized out> #8 0x00007fc3d5126850 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 No locals. Thread 2 (Thread 0x7fc3d15f5640 (LWP 922309) "radiusd"): #0 __futex_abstimed_wait_common64 (private=<optimized out>, cancel=true, abstime=0x0, op=393, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:57 sc_cancel_oldtype = 0 sc_ret = <optimized out> resultvar = <optimized out> __arg6 = <optimized out> __arg5 = <optimized out> __arg4 = <optimized out> __arg3 = <optimized out> __arg2 = <optimized out> __arg1 = <optimized out> _a6 = <optimized out> _a5 = <optimized out> _a4 = <optimized out> _a3 = <optimized out> _a2 = <optimized out> _a1 = <optimized out> #1 __futex_abstimed_wait_common (cancel=true, private=<optimized out>, abstime=0x0, clockid=0, expected=0, futex_word=0x572a546f13e8 <thread_pool+168>) at ./nptl/futex-internal.c:87 err = <optimized out> clockbit = 256 op = 393 err = <optimized out> clockbit = <optimized out> op = <optimized out> #2 __GI___futex_abstimed_wait_cancelable64 (futex_word=futex_word@entry=0x572a546f13e8 <thread_pool+168>, expected=expected@entry=0, clockid=clockid@entry=0, abstime=abstime@entry=0x0, private=<optimized out>) at ./nptl/futex-internal.c:139 No locals. #3 0x00007fc3d509cbdf in do_futex_wait (sem=sem@entry=0x572a546f13e8 <thread_pool+168>, abstime=0x0, clockid=0) at ./nptl/sem_waitcommon.c:111 err = <optimized out> #4 0x00007fc3d509cc78 in __new_sem_wait_slow64 (sem=sem@entry=0x572a546f13e8 <thread_pool+168>, abstime=0x0, clockid=0) at ./nptl/sem_waitcommon.c:183 _buffer = {__routine = 0x7fc3d509cbb0 <__sem_wait_cleanup>, __arg = 0x572a546f13e8 <thread_pool+168>, __canceltype = 1458226016, __prev = 0x0} err = <optimized out> d = 34359738368 #5 0x00007fc3d509ccf1 in __new_sem_wait (sem=sem@entry=0x572a546f13e8 <thread_pool+168>) at ./nptl/sem_wait.c:42 No locals. #6 0x0000572a546a5080 in request_handler_thread (arg=0x572a5702e6d0) at src/main/threads.c:741 self = 0x572a5702e6d0 re_wait = <optimized out> #7 0x00007fc3d5094ac3 in start_thread (arg=<optimized out>) at ./nptl/pthread_create.c:442 ret = <optimized out> pd = <optimized out> out = <optimized out> unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140720694236800, -4619313545745495514, 140479008036416, 0, 140479069505488, 140720694237152, 4639627303921420838, 4639636563766184486}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}} not_first_call = <optimized out> #8 0x00007fc3d5126850 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 No locals. Thread 1 (Thread 0x7fc3d5850c00 (LWP 837582) "radiusd"): #0 futex_wait (private=0, expected=2, futex_word=0x572a56ee9c88) at ../sysdeps/nptl/futex-internal.h:146 __ret = -512 err = <optimized out> err = <optimized out> __ret = <optimized out> resultvar = <optimized out> __arg4 = <optimized out> __arg3 = <optimized out> __arg2 = <optimized out> __arg1 = <optimized out> _a4 = <optimized out> _a3 = <optimized out> _a2 = <optimized out> _a1 = <optimized out> #1 __GI___lll_lock_wait (futex=futex@entry=0x572a56ee9c88, private=0) at ./nptl/lowlevellock.c:49 No locals. #2 0x00007fc3d5098002 in lll_mutex_lock_optimized (mutex=0x572a56ee9c88) at ./nptl/pthread_mutex_lock.c:48 __futex = 0x572a56ee9c88 private = <optimized out> private = <optimized out> __value = <optimized out> __futex = <optimized out> #3 ___pthread_mutex_lock (mutex=mutex@entry=0x572a56ee9c88) at ./nptl/pthread_mutex_lock.c:93 type = <optimized out> __PRETTY_FUNCTION__ = "___pthread_mutex_lock" id = <optimized out> #4 0x0000572a546bfc05 in tls_socket_recv (listener=0x572a56e6f710) at src/main/tls_listen.c:476 already_read = false packet = <optimized out> data_len = <optimized out> sock = <optimized out> status = <optimized out> doing_init = false rcode = <optimized out> request = <optimized out> doing_init = <optimized out> already_read = <optimized out> rcode = <optimized out> data_len = <optimized out> packet = <optimized out> request = <optimized out> sock = <optimized out> status = <optimized out> get_application_data = <optimized out> read_application_data = <optimized out> check_for_setup = <optimized out> do_close = <optimized out> __talloc_steal_ret = <optimized out> __talloc_steal_ret = <optimized out> host_ipaddr = <optimized out> #5 dual_tls_recv (listener=0x572a56e6f710) at src/main/tls_listen.c:732 packet = 0x0 fun = <optimized out> sock = 0x572a56ee9b60 client = 0x572a56e70df0 rbio = <optimized out> #6 0x00007fc3d59aaee4 in fr_event_loop (el=0x572a56ab72f0) at src/lib/event.c:713 ef = 0x572a56ab7528 i = 8 rcode = <optimized out> when = {tv_sec = 1727333383, tv_usec = 500000} wake = <optimized out> read_fds = {fds_bits = {0, 8192, 0 <repeats 14 times>}} write_fds = {fds_bits = {0 <repeats 16 times>}} #7 0x0000572a546af1d5 in radius_event_process () at src/main/process.c:6565 No locals. #8 0x0000572a546834bc in main (argc=<optimized out>, argv=<optimized out>) at src/main/radiusd.c:641 rcode = 0 status = <optimized out> argval = <optimized out> spawn_flag = true display_version = false flag = 0 from_child = {4, 5} p = <optimized out> state = 0x572a546f0c80 <global_state> autofree = 0x572a5663a330 --- Thanks

3 4

Add TLS version to logs with linelog in FreeRADIUS 3.2.4
by dominic.stalder＠unibe.ch 26 Sep '24

26 Sep '24

Hi guys A few weeks back, I used FreeRADIUS 3.0.26 on Ubuntu 22.04.4 LTS before upgrading to FreeRADIUS 3.2.4 (NetworkRADIUS packages). Everything works great so far, except two attributes are missing in our logs since then: TLS-Session-Version and TLS-Session-Cipher-Suite. My /etc/freeradius/mods-available/linelog configuration looked like this on FreeRADIUS 3.0.x: sp { Access-Accept = "%t : AuthZ: (%I) Access-Accept: [%{%{reply:User-Name}:-%{User-Name}}] TLS-Version=%{%{session-state:TLS-Session-Version}:-NULL} TLS-Ciphers=%{%{session-state:TLS-Session-Cipher-Suite}:-NULL} SSID=%{%{request:Called-Station-SSID}:-NULL} Calling-Station-Id=%{%{request:Calling-Station-Id}:-Unknown} Called-Station-Id=%{%{request:Called-Station-Id}:-Unknown} Filter-ID=%{%{reply:Filter-Id}:-NULL} VLAN=%{%{reply:Tunnel-Private-Group-Id}:-NULL} Class=%{%{reply:Class}:-NULL} (from client %{Client-Shortname} port %{%{request:Nas-Port}:-0} cli %{%{request:Calling-Station-Id}:-Unknown})" } When I start the debugging (see full output below), I can see the following attributes, which I could use / log now: (10) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (10) eap_peap: TLS-Session-Version = "TLS 1.2" When I try to “access” them in the linelog configuration like this… sp { Access-Accept = "%t : AuthZ: (%I) Access-Accept: [%{%{reply:User-Name}:-%{User-Name}}] TLS-Test=%{%{eap_peap:TLS-Session-Version}:-NULL} TLS-Version=%{%{session-state:TLS-Session-Version}:-NULL} TLS-Ciphers=%{%{session-state:TLS-Session-Cipher-Suite}:-NULL} SSID=%{%{request:Called-Station-SSID}:-NULL} Calling-Station-Id=%{%{request:Calling-Station-Id}:-Unknown} Called-Station-Id=%{%{request:Called-Station-Id}:-Unknown} Filter-ID=%{%{reply:Filter-Id}:-NULL} VLAN=%{%{reply:Tunnel-Private-Group-Id}:-NULL} Class=%{%{reply:Class}:-NULL} (from client %{Client-Shortname} port %{%{request:Nas-Port}:-0} cli %{%{request:Calling-Station-Id}:-Unknown})" } } …I get the following error in the debug output: (21) 802.1x_authz_log: ERROR: %t : AuthZ: (%I) Access-Accept: [%{%{reply:User-Name}:-%{User-Name}}] TLS-Test=%{%{eap_peap:TLS-Session-Version}:-NULL} TLS-Version=%{%{session-state:TLS-Session-Version}:-NULL} TLS-Ciphers=%{%{session-state:TLS-Session-Cipher-Suite}:-NULL} SSID=%{%{request:Called-Station-SSID}:-NULL} Calling-Station-Id=%{%{request:Calling-Station-Id}:-Unknown} Called-Station-Id=%{%{request:Called-Station-Id}:-Unknown} Filter-ID=%{%{reply:Filter-Id}:-NULL} VLAN=%{%{reply:Tunnel-Private-Group-Id}:-NULL} Class=%{%{reply:Class}:-NULL} (from client %{Client-Shortname} port %{%{request:Nas-Port}:-0} cli %{%{request:Calling-Station-Id}:-Unknown}) (21) 802.1x_authz_log: ERROR: ^ Unknown module Any hint, how I can “access” those two attributes in FreeRADIUS 3.2.4 correctly? (10) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (10) eap_peap: TLS-Session-Version = "TLS 1.2" Thanks in advance and best regards Dominic *** Full debug output: root@id-radiustest1:~# freeradius -X FreeRADIUS Version 3.2.4 Copyright (C) 1999-2023 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/totp including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/detail.log including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/rfc7542 including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/control including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/proxy-inner-tunnel including configuration file /etc/freeradius/sites-enabled/control-socket main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 proxy_dedup_window = 1 cleanup_delay = 5 max_requests = 16384 max_fds = 512 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } ... } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = eap radiusd: #### Instantiating modules #### modules { # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_linelog # Loading module "802.1x_authz_log" from file /etc/freeradius/mods-enabled/linelog linelog 802.1x_authz_log { filename = "/var/log/freeradius/authz.log" escape_filenames = no syslog_severity = "info" permissions = 384 reference = "sp.%{%{reply:Packet-Type}:-format}" } # Loading module "acct_log" from file /etc/freeradius/mods-enabled/linelog linelog acct_log { filename = "/var/log/freeradius/acct.log" escape_filenames = no syslog_severity = "info" permissions = 384 reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_totp # Loading module "totp" from file /etc/freeradius/mods-enabled/totp totp { time_step = 30 otp_length = 6 lookback_steps = 1 lookback_interval = 30 lookforward_steps = 0 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "PEAP" timer_expire = 60 max_eap_type = 52 ignore_unknown_eap_types = yes cisco_accounting_username_bug = no max_sessions = 8192 dedup_key = "" } # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } instantiate { } # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "802.1x_authz_log" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "acct_log" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "totp" from file /etc/freeradius/mods-enabled/totp # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "proxy-inner-tunnel" soh = no require_client_cert = no } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.crt" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "ECDHE-RSA-AES128-SHA ECDHE-RSA-AES256-SHA ECDHE-RSA-AES128-GCM-SHA256 ECDHE-RSA-AES256-GCM-SHA384 ECDHE-RSA-CHACHA20-POLY1305 TLS_AES_256_GCM_SHA384" reject_unknown_intermediate_ca = no ecdh_curve = "prime256v1" tls_max_version = "1.3" tls_min_version = "1.0" cache { enable = no lifetime = 12 name = "EAP module" max_entries = 0 persist_dir = "/var/log/freeradius/tlscache" } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = no use_nonce = yes timeout = 0 softfail = no } } tls: In order to use TLS 1.0 and/or TLS 1.1, you likely need to set: cipher_list = "DEFAULT@SECLEVEL=0" # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/coa # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/sites-enabled/inner-tunnel:336 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type eap for attr Auth-Type # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading pre-proxy {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server default server proxy-inner-tunnel { # from file /etc/freeradius/sites-enabled/proxy-inner-tunnel # Loading authenticate {...} Compiling Auth-Type mschap for attr Auth-Type # Loading authorize {...} } # server proxy-inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "control" listen { socket = "/var/run/freeradius/control/freeradius.sock" uid = "freerad" gid = "freerad" mode = "rw" peercred = no } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 1812 } listen { type = "acct" ipaddr = * port = 1813 } Listening on command file /var/run/freeradius/control/freeradius.sock Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on proxy address * port 44695 Ready to process requests

3 16