- Freeradius-Users - lists.freeradius.org

freeradius stuck after enable dynamic client with mysql
by hs 21 Oct '17

21 Oct '17

os: centos 7.3 freeradius version: 3.0.13 I enabled dynamic clients with mysql, but freeradius stuck after receive a packet. same config works on freeradius 3.0.4。 Here is output: [root@localhost raddb]# radiusd -X FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/sql including configuration file /etc/raddb/mods-config/sql/main/mysql/queries.conf including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/dynamic-clients main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client dynamic { ipaddr = 172.16.240.0/24 require_message_authenticator = no limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } dynamic_clients = "dynamic_clients" lifetime = 3600 } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_sql # Loading module "sql" from file /etc/raddb/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 3306 login = "root" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime= '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime= '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid,acctuniqueid,username, realm,nasipaddress,nasportid, nasporttype,acctstarttime,acctupdatetime, acctstoptime,acctsessiontime, acctauthentic, connectinfo_start,connectinfo_stop, acctinputoctets, acctoutputoctets,calledstationid, callingstationid, acctterminatecause,servicetype,framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime= FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime= %{%{Acct-Session-Time}:-NULL}, acctinputoctets= '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql rlm_sql_mysql: libmysql version: 5.5.52-MariaDB mysql { tls { } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.52-MariaDB, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.52-MariaDB, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.52-MariaDB, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.52-MariaDB, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.52-MariaDB, protocol version 10 } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:330 } # server inner-tunnel server dynamic_clients { # from file /etc/raddb/sites-enabled/dynamic-clients # Loading authorize {...} } # server dynamic_clients radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 40655 Listening on proxy address :: port 34676 Ready to process requests (0) server dynamic_clients { (0) # Executing section authorize from file /etc/raddb/sites-enabled/dynamic-clients (0) authorize { (0) if ("%{sql: SELECT nasname FROM nas WHERE nasname = '%{Packet-Src-IP-Address}'}") { (0) EXPAND %{User-Name} (0) --> (0) SQL-User-Name set to '' rlm_sql (sql): Closing connection (0): Hit idle_timeout, was idle for 543 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 543 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 543 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 543 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 543 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): 0 of 0 connections in use. You may need to increase "spare" rlm_sql (sql): Opening additional connection (5), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.52-MariaDB, protocol version 10 rlm_sql (sql): Reserved connection (5) (0) Executing select query: SELECT nasname FROM nas WHERE nasname = '172.16.240.232' rlm_sql (sql): Released connection (5) Need 2 more connections to reach min connections (3) rlm_sql (sql): Opening additional connection (6), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.52-MariaDB, protocol version 10 (0) EXPAND %{sql: SELECT nasname FROM nas WHERE nasname = '%{Packet-Src-IP-Address}'} (0) --> 172.16.240.232 (0) if ("%{sql: SELECT nasname FROM nas WHERE nasname = '%{Packet-Src-IP-Address}'}") -> TRUE (0) if ("%{sql: SELECT nasname FROM nas WHERE nasname = '%{Packet-Src-IP-Address}'}") { (0) update control { (0) EXPAND %{Packet-Src-IP-Address} (0) --> 172.16.240.232 (0) &FreeRADIUS-Client-IP-Address = 172.16.240.232 (0) EXPAND %{User-Name} (0) --> (0) SQL-User-Name set to '' rlm_sql (sql): Reserved connection (5) (0) Executing select query: SELECT shortname FROM nas WHERE nasname = '172.16.240.232' rlm_sql (sql): Released connection (5) (0) EXPAND %{sql: SELECT shortname FROM nas WHERE nasname = '%{Packet-Src-IP-Address}'} (0) --> test (0) &FreeRADIUS-Client-Shortname = test (0) EXPAND %{User-Name} (0) --> (0) SQL-User-Name set to '' rlm_sql (sql): Reserved connection (6) (0) Executing select query: SELECT secret FROM nas WHERE nasname = '172.16.240.232' rlm_sql (sql): Released connection (6) (0) EXPAND %{sql: SELECT secret FROM nas WHERE nasname = '%{Packet-Src-IP-Address}'} (0) --> testing123 (0) &FreeRADIUS-Client-Secret = testing123 (0) EXPAND %{User-Name} (0) --> (0) SQL-User-Name set to '' rlm_sql (sql): Reserved connection (5) (0) Executing select query: SELECT type FROM nas WHERE nasname = '172.16.240.232' rlm_sql (sql): Released connection (5) (0) EXPAND %{sql: SELECT type FROM nas WHERE nasname = '%{Packet-Src-IP-Address}'} (0) --> other (0) &FreeRADIUS-Client-NAS-Type = other (0) EXPAND %{User-Name} (0) --> (0) SQL-User-Name set to '' rlm_sql (sql): Reserved connection (6) (0) Executing select query: SELECT server FROM nas WHERE nasname = '172.16.240.232' rlm_sql (sql): Released connection (6) (0) EXPAND %{sql: SELECT server FROM nas WHERE nasname = '%{Packet-Src-IP-Address}'} (0) --> (0) &FreeRADIUS-Client-Virtual-Server = (0) } # update control = noop (0) } # if ("%{sql: SELECT nasname FROM nas WHERE nasname = '%{Packet-Src-IP-Address}'}") = noop (0) [ok] = ok (0) } # authorize = ok (0) } # server dynamic_clients (0) Converting control list to client fields (0) ipv4addr = 172.16.240.232 (0) secret = testing123 (0) shortname = test (0) nas_type = other (0) nas_type = other

2 7

What proxy features does the freeradius server support?
by work vlpl 20 Oct '17

20 Oct '17

Hello, I want to implement the following proxy scenario: 1. User send request with eap-ttls or eap-tls or peap-mschapv2. 2. Proxy freeradius server analyze this requeset 3. If username from these request has custom radius attribute which determines whether the request should be sent to. 4. Send original or new request with the same type as original, to the home server 5. If home server return Accept, Accept- user, if no - reject. And I want to know is this possible or not ? If yes please give me some example. The protocols are eap-tls; eap-ttls; peap-mschapv2;

2 5

pam_radius_auth.so authentication algorithm
by Oussama BOUNAIM 20 Oct '17

20 Oct '17

Hello, I want to setup a centralized authentication on all my Linux servers. To do so, I'am trying to setup Radius authentication on a Windows Active Directory (with the NPS role) using the PAM module pam_radius_auth.so https://freeradius.org/sub_projects/. The authentication works, however, the NPS (Radius Server) is complaining about the authentication method used by pam_radius_auth.so. It says that the client is using PAP insecure PAP protocol. I didn't find any parameter on the module documentation <https://github.com/FreeRADIUS/pam_radius> to change this behavior. Does pam_radius_auth.so support other secure protocol like CHAP ? Thanks in advance for your help. Best Regards,

3 4

Default vs Inner-tunnel concepts
by Tom Yard 20 Oct '17

20 Oct '17

Dear, I want to use eap with TLS authentication in Freeradius. At this moment, I've setup both default and inner.-tunnel files, and everything works OK. Am I right or do I have to use just inner-tunnel file? Please can you help me in this concept? Because I think if I have to use eap with TLS, I have to edit default and inner tunnel files, but maybe I'm wrong and I just have to edit inner-tunnel file and let default file as it comes from package installation. Special thanks, TOM

2 5

Authentication against the Unix password database?
by Stefan Bruda 18 Oct '17

18 Oct '17

Hello, I am running freeradius-3.0.14 (stable Gentoo, USE="pam python readline ssl -debug (-firebird) -iodbc -kerberos -ldap -mysql -odbc -oracle -pcap -postgres -sqlite"). I would like my radius server to authenticate users against the Unix password database. Direct authentication is preferred but PAM authentication will do just as well. With the 2.x version I succeeded in doing this by forcing Auth-Type = System in the users file and using the "unix" module, but this no longer works (apparently justifiably so) in the 3.x version. Now I have the following for my default site: authorize { ... unix # files ... } authenticate { ... pam ... } I then get the following somehow puzzling result (with a certified valid Unix user name and password): (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { ... (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "<del>", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: No EAP-Message, not doing EAP (2) [eap] = noop (2) [unix] = notfound (2) [expiration] = noop (2) [logintime] = noop (2) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (2) pap: WARNING: Authentication will fail unless a "known good" password is available (2) [pap] = noop (2) } # authorize = ok (2) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject What I am puzzled about is the "notfound" result provided by the unix module. Next I tried to do PAM authentication by uncommenting the "files" line in the authorize section and forcing "Auth-Type = Pam" in the users file. This one at least communicates with the PAM system: (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { ... (0) [unix] = notfound (0) files: users: Matched entry DEFAULT at line 7 (0) [files] = ok (0) [expiration] = noop (0) [logintime] = noop (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) Found Auth-Type = pam (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) pam: Using pamauth string "radiusd" for pam.conf lookup (0) pam: ERROR: pam_authenticate failed: Authentication failure (0) [pam] = reject (0) } # authenticate = reject (0) Failed to authenticate the user I get the following in the logs (login name redacted): Oct 18 10:23:40 localhost unix_chkpwd[26318]: check pass; user unknown Oct 18 10:23:40 localhost unix_chkpwd[26319]: check pass; user unknown Oct 18 10:23:40 localhost unix_chkpwd[26319]: password check failed for user (<del>) Oct 18 10:23:40 localhost radiusd: pam_unix(radiusd:auth): authentication failure; logname=<del> uid=107 euid=107 tty= ruser= rhost= user=<del> The file /etc/pam.d/radius looks fine to me: auth include system-auth account include system-auth password include system-auth session include system-auth PAM authentication works well with my other subsystems (e.g., sshd). Should more information be needed just ask. If anybody have any idea about what I am doing wrong I would very much appreciate to hear about it. Many thanks in advance! Best regards, Stefan

2 2

EAP Auth-Type Error
by Byron Jeffery 18 Oct '17

18 Oct '17

Hi All I am currently building a Freeradius (Version 3.0.15) on Ubuntu 16.04 in an Azure environment authenticating to an Active Directory server using eap-peap-mschap. I also have a Freeradius version 3.0.12 currently running and have replicated all the settings across to the new build, however, I am unable to successfully authenticate and have noted the error "eap: No EAP-Message, not doing EAP" in the debug as follows particularly when moving from default to inner-tunnel: eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xa70318b8a2020d85 (6) eap: Finished EAP session with state 0xa70318b8a2020d85 (6) eap: Previous EAP request found for state 0xa70318b8a2020d85, released from the list (6) eap: Peer sent packet with method EAP TTLS (21) (6) eap: Calling submodule eap_ttls to process data (6) eap_ttls: Authenticate (6) eap_ttls: Continuing EAP-TLS (6) eap_ttls: Peer indicated complete TLS record size will be 69 bytes (6) eap_ttls: Got complete TLS record (69 bytes) (6) eap_ttls: [eaptls verify] = length included (6) eap_ttls: [eaptls process] = ok (6) eap_ttls: Session established. Proceeding to decode tunneled attributes (6) eap_ttls: Got tunneled request (6) eap_ttls: User-Name = "omitted" (6) eap_ttls: User-Password = "omitted" (6) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_ttls: Sending tunneled request (6) Virtual server inner-tunnel received request (6) User-Name = "omitted" (6) User-Password = "omitted" (6) FreeRADIUS-Proxied-To = 127.0.0.1 *(6) WARNING: Outer and inner identities are the same. User privacy is compromised.* (6) server inner-tunnel { (6) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [mschap] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: No EAP-Message, not doing EAP (6) [eap] = noop (6) [expiration] = noop (6) [logintime] = noop (6) } # authorize = noop *(6) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject* (6) Failed to authenticate the user (6) Using Post-Auth-Type Reject (6) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (6) Post-Auth-Type REJECT { (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> omitted (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) update outer.session-state { (6) &Module-Failure-Message := &request:Module-Failure-Message -> 'No Auth-Type found: rejecting the user via Post-Auth-Type = Reject' (6) } # update outer.session-state = noop (6) } # Post-Auth-Type REJECT = updated (6) } # server inner-tunnel (6) Virtual server sending reply (6) eap_ttls: Got tunneled Access-Reject *(6) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed* (6) eap: Sending EAP Failure (code 4) ID 1 length 4 (6) eap: Failed in EAP select (6) [eap] = invalid (6) } # authenticate = invalid (6) Failed to authenticate the user (6) Using Post-Auth-Type Reject (6) # Executing group from file /etc/freeradius/sites-enabled/default (6) Post-Auth-Type REJECT { (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> omitted (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) [eap] = noop (6) policy remove_reply_message_if_eap { (6) if (&reply:EAP-Message && &reply:Reply-Message) { (6) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (6) else { (6) [noop] = noop (6) } # else = noop (6) } # policy remove_reply_message_if_eap = noop (6) } # Post-Auth-Type REJECT = updated (6) Delaying response for 1.000000 seconds I am a bit stumped as to where I might be going wrong as I have set the default_eap_type = peap in the /mods-enaabled/eap file as well as have the following enabled in the authorise and authentication in the sites-enabled/inner-tunnel file: authorize { filter_username update control { &Proxy-To-Realm := LOCAL } eap { ok = return } expiration logintime } authenticate { Auth-Type ntlm_auth { ntlm_auth } # # MSCHAP authentication. Auth-Type MS-CHAP { mschap } # # For old names, too. # mschap # Allow EAP authentication. eap >From the debug log I posted above, it seems that the eap message is not being passed through to the inner-tunnel. As a side note, testing ntlm_auth responds with a "NT_STATUS_OK: Success (0x0)" message. I have even rebuilt the server leaving many of the default settings, but am still getting the error. I hope I am not missing the obvious and would appreciate if someone could point me in the right direction. In addition, my other question is why do I get the "*WARNING: Outer and inner identities are the same. User privacy is compromised."* warning and how may I make it more secure? - Kind Regards - Byron Jeffery -

2 2

Re: Accounting Relay to Fortigate - Issue with accounting file
by Hitesh Vinzoda 17 Oct '17

17 Oct '17

Hi Alan et al, Apologies for the cluttered email. Detail listener /var/log/freeradius/radacct/detail state unopened signalled 0 waiting 1.086950 sec Waking up in 1.0 seconds. Polling for detail file /var/log/freeradius/radacct/detail Detail listener /var/log/freeradius/radacct/detail state unopened signalled 0 waiting 0.762697 sec Waking up in 0.7 seconds. ^C root@user-To-be-filled-by-O-E-M:/var/log/freeradius/radacct# ls -lrt total 4 drwxr-xr-x 2 freerad freerad 4096 Oct 18 05:08 192.168.1.2 root@user-To-be-filled-by-O-E-M:/var/log/freeradius/radacct# root@user-To-be-filled-by-O-E-M:/var/log/freeradius/radacct# root@user-To-be-filled-by-O-E-M:/var/log/freeradius/radacct# ls -lrt total 4 drwxr-xr-x 2 freerad freerad 4096 Oct 18 05:08 192.168.1.2 root@user-To-be-filled-by-O-E-M:/var/log/freeradius/radacct# cd 192.168.1.2/ root@user-To-be-filled-by-O-E-M:/var/log/freeradius/radacct/192.168.1.2# ls -lrt total 8 -rw------- 1 freerad freerad 141 Oct 17 18:14 auth-detail-20171017 -rw------- 1 freerad freerad 1267 Oct 18 05:41 auth-detail-20171018 root@user-To-be-filled-by-O-E-M:/var/log/freeradius/radacct/192.168.1.2# FreeRADIUS Version 2.1.12 Hi, I am setting up freeRADIUS to forward accounting requests to Fortigate. I have done the configuration but i am observing messages as below; Detail listener /var/log/freeradius/radacct/detail state unopened signalled 0 waiting 1.086950 sec Waking up in 1.0 seconds. Polling for detail file /var/log/freeradius/radacct/detail Detail listener /var/log/freeradius/radacct/detail state unopened signalled 0 waiting 0.762697 sec Waking up in 0.7 seconds. ^C root@user-To-be-filled-by-O-E-M:/var/log/freeradius/radacct# ls -lrt total 4 drwxr-xr-x 2 freerad freerad 4096 Oct 18 05:08 192.168.1.2 root@user-To-be-filled-by-O-E-M:/var/log/freeradius/radacct# cd 192.168.1.2/ root@user-To-be-filled-by-O-E-M:/var/log/freeradius/radacct/192.168.1.2# ls -lrt total 8 -rw------- 1 freerad freerad 141 Oct 17 18:14 auth-detail-20171017 -rw------- 1 freerad freerad 1267 Oct 18 05:41 auth-detail-20171018 root@user-To-be-filled-by-O-E-M:/var/log/freeradius/radacct/192.168.1.2# FreeRADIUS Version is 2.1.12 I have modified the modules/detail file to log all accounting packets to a single detail file as below Comment the line below by adding the # in front: # detailfile = ${radacctdir}/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d detailfile = ${radacctdir}/detail I can see that it is not creating detail file and above log messages keeps on repeating for polling the detail file. I m not sure if should be seeing those messages during debug. Currently i dont have clients to simulate but will be made available tomorrow hence i m trying to be more proactive that the relay should work. Any pointers are appreciated. I am going through the documentation but any interim help is appreciated. Cheers Hitesh Vinzoda On Tuesday, 17 October 2017 10:48 PM, Alan DeKok <aland(a)deployingradius.com> wrote: > On Oct 17, 2017, at 12:24 PM, Hitesh Vinzoda via Freeradius-Users <freeradius-users(a)lists.freeradius.org> wrote: > > Cluttered Email - Resending again Fix your mailer to post text, not HTML. That way it won't mangle the debug output. The text you posted is incomprehensible, so I won't bother trying to figure it out. Instead, I'll suggest that you follow the documentation. See the file sites-available/decoupled-accounting. That contains examples and documentation for how to configure detail file relaying. Or, see sites-available/copy-acct-to-home-server. That contains more examples and documentation. i.e. instead of giving a partial summary of what you did and asking "what went wrong?", you should follow the existing documentation and examples. If it doesn't work, you can then explain what you did, and what happened. And post messages which aren't mangled. That makes it much easier to help you. Alan DeKok.

2 1

Proxy EAP-TLS request after successful authorization with eap module
by work vlpl 17 Oct '17

17 Oct '17

Hello, I am using v3.0.x branch and want to know is it possible to make proxy request to another freeradius/radius server after proxy radius server successfully handle request in eap module? In general I want to know is it possible to implement the next scheme: [user request eap-tls] | [freeradius proxy server] (check certificate; if certificate is good, read certificate values; proxy call home radius server, if not reject) | [freeradius home server] (home server set additional attributes like port speed) My simplified configuration looks like this server test_virtual_site { authorize { eap debug_all #:Need-Remote-Call - custom radius attribute added to dictionary file if (&reply:Need-Remote-Call = 'yes'){ update control { &Proxy-To-Realm := LOCAL } } } authenticate { eap } post_auth { debug_all } } and inner eap-tls virtual site looks like this server check-eap-tls { authorize { update config { &Auth-Type := Accept } } } In this configuration after check-eap-tls virtual site accept request, test_virtual_site jump to post-auth section, and debug_all and update control instructions are not executing. If I not set Auth-Type := Accept in check-eap-tls virtual site, eap module in debug log inform me what eap virtual site reject user certificate. And if I set Proxy-To-Realm attribute inside check-eap-tls virtual site proxy request to home server does not happen.

3 5

Accounting Relay to Fortigate - Issue with accounting file
by Hitesh Vinzoda 17 Oct '17

17 Oct '17

Hi, I am setting up freeRADIUS to forward accounting requests to Fortigate. I have done the configuration but i am observing messages as below; Detail listener /var/log/freeradius/radacct/detail state unopened signalled 0 waiting 1.086950 secWaking up in 1.0 seconds.Polling for detail file /var/log/freeradius/radacct/detailDetail listener /var/log/freeradius/radacct/detail state unopened signalled 0 waiting 0.762697 secWaking up in 0.7 seconds.^Croot@user-To-be-filled-by-O-E-M:/var/log/freeradius/radacct# ls -lrttotal 4drwxr-xr-x 2 freerad freerad 4096 Oct 18 05:08 192.168.1.2root@user-To-be-filled-by-O-E-M:/var/log/freeradius/radacct# root@user-To-be-filled-by-O-E-M:/var/log/freeradius/radacct# root@user-To-be-filled-by-O-E-M:/var/log/freeradius/radacct# ls -lrttotal 4drwxr-xr-x 2 freerad freerad 4096 Oct 18 05:08 192.168.1.2root@user-To-be-filled-by-O-E-M:/var/log/freeradius/radacct# cd 192.168.1.2/root@user-To-be-filled-by-O-E-M:/var/log/freeradius/radacct/192.168.1.2# ls -lrttotal 8-rw------- 1 freerad freerad 141 Oct 17 18:14 auth-detail-20171017-rw------- 1 freerad freerad 1267 Oct 18 05:41 auth-detail-20171018root@user-To-be-filled-by-O-E-M:/var/log/freeradius/radacct/192.168.1.2# FreeRADIUS Version 2.1.12 I have modified the modules/detail file to log all accounting packets to a single detail file as below Comment the line below by adding the # in front:# detailfile = ${radacctdir}/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d detailfile = ${radacctdir}/detail I can see that it is not creating detail file and above log messages keeps on repeating for polling the detail file. I have to prep this and the set up will be tested in next day. Any pointers are appreciated. Best Regards Hitesh Vinzoda

2 2

logrotate question
by Zenon Mousmoulas 17 Oct '17

17 Oct '17

Hi, a question about the logrotate script: I understand that, upon SIGHUP, freeradius will reopen the main log file (radius.log). I also understand this does not extend to files written by linelog/detail modules; these need to be handled separately (with `radmin -e "hup xxx"'). However the logrotate script does not use such signalling, it rather opts for the copytruncate option. I wonder why that is the case. Is it the complexity of sending a signal to all modules (and all potential instances thereof)? Is it that, apart from re-opening the log file, SIGHUP will also cause the server to reload the (potentially broken) configuration? The copytruncate option avoids all that, but it is obviously slower/less efficient for rotating large log files. Or maybe is there a different reason behind this? Cheers, Z.

2 1