- Freeradius-Users - lists.freeradius.org

802.1x in Windows
by Michael Schwartzkopff 06 Sep '16

06 Sep '16

Hi, this might be a little bit off topic, but perhaps someone can help here. I want to set up 802.1x for windows systems. In windows 7 an higher, is it possible to use certificates for the client authentication if no user is logged in, but passwords for the user authentication? Mit freundlichen Grüßen, Michael Schwartzkopff -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64, +49 (162) 165 0044 Schleißheimer Straße 26/MG, 80333 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Marc Schiffbauer Aufsichtsratsvorsitzender: Florian Kirstein

2 2

Use freepbx for Asterisk VOIP
by Mohamad Yazdian 06 Sep '16

06 Sep '16

Hello everyone Can I use freepbx for Asterisk VOIP accounting? On Mon, Sep 5, 2016 at 4:31 PM, < freeradius-users-request(a)lists.freeradius.org> wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Re: Salted SHA512 (Stefan Paetow) > 2. Re: Salted SHA512 (Alan DeKok) > 3. How to configure non-priveleged LDAP bind in FreeRADIUS > 3.0.11 (Bogdan Rudas) > 4. FreeRadius reboot needed on adding a NAS ? (Frederic Fichter) > 5. Re: FreeRadius reboot needed on adding a NAS ? (Alan DeKok) > 6. Re: How to configure non-priveleged LDAP bind in FreeRADIUS > 3.0.11 (Alan DeKok) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 5 Sep 2016 10:32:46 +0000 > From: Stefan Paetow <Stefan.Paetow(a)jisc.ac.uk> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: Salted SHA512 > Message-ID: <C4E4EB29-B07F-4065-B879-AABF94592823(a)jisc.ac.uk> > Content-Type: text/plain; charset="utf-8" > > > Hmm, not sure where to look. It seems both OpenVPN and StrongSwan send > EAP requests to FreeRADIUS, but from when I can see, EAP only supports MD5 > and Crypt? Does that mean I should change it to PAP instead of EAP? > > Do StrongSwan and OpenVPN allow you to set the inner authentication method > for EAP, i.e. EAP-TTLS/EAP-GTC or EAP-TTLS/EAP-MSCHAPv2 (outer/inner)? If > you can, configure your EAP-TTLS or EAP method to use GTC (Generic Token > Card), which in FreeRADIUS is set up to use PAP. Of course, if they allow > you to set PAP as the inner, you can go straight to PAP in the inner tunnel > :-) > > Stefan Paetow > Moonshot Industry & Research Liaison Coordinator > > t: +44 (0)1235 822 125 > gpg: 0x3FCE5142 > xmpp: stefanp(a)jabber.dev.ja.net > skype: stefan.paetow.janet > > jisc.ac.uk > > Jisc is a registered charity (number 1149740) and a company limited by > guarantee which is registered in England under Company No. 5747339, VAT No. > GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, > Bristol, BS2 0JA. T 0203 697 5800. > > > > >

1 0

create SSH accounts using RADIUS pam
by Janis Heller 06 Sep '16

06 Sep '16

I use the REST module of RADIUS to validate login requests (username & password). Now I would like my users to be able to login to some servers using SSH. Their accounts should be all very unprivileged (just for SSH tunneling). After setting up the pam sshd module I recognized the login would be only possible by creating a new user with an empty password by using: adduser testuser on the server. Is there a way to prevent this and allow users to login in case of RADIUS accepted their username & password. I already searched for this problem: http://serverfault.com/questions/567628/authenticate-radius-user-using-pam-… Setting up ldap would be a bit too much for this I think, isn’t there an easier way? All the best;

5 8

EAP-TTLS sessions and 'anonymous' Access-Request
by Bogdan Rudas 05 Sep '16

05 Sep '16

Hi, When I test eap_ttls setup, for single connection attempt I see at least 6 "Access-Request" with 'anonymous' user name and some of them have log messages like this: *(1) eap_ttls: TLS_accept: unknown state(1) eap_ttls: TLS_accept: Need to read more data: unknown state* Is it encapsulation of stateful TLS session into stateless UDP-based protocol or something goes wrong with my setup? Thank you. -- Bogdan Rudas Head of Minsk IT Support Department Exadel Inc. http://www.exadel.com/ E-mail: brudas(a)exadel.com Skype ID: bogdan.rudas -- CONFIDENTIALITY NOTICE: This email and files attached to it are confidential. If you are not the intended recipient you are hereby notified that using, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If you have received this email in error please notify the sender and delete this email.

2 1

How to configure non-priveleged LDAP bind in FreeRADIUS 3.0.11
by Bogdan Rudas 05 Sep '16

05 Sep '16

Hi, I would like to configure LDAP authentication for WiFi users with OpenLDAP back-ends (passwords are hashed). To perform initial bind to LDAP database I use restricted account which can read directory tree, determine DN on user and most of it's attributes but can't read passwords hashes. Then I expect FreeRadius to bind with DN found on previous step and user-supplied password. But instead of this I've got messages: Ready to process requests (0) User-Name = "brudas" (0) User-Password = "clearpass" (0) NAS-IP-Address = 127.0.0.1 (0) NAS-Port = 10 (0) Message-Authenticator = 0x86f22bc484991235fa4335a8b959a351 (0) # Executing section authorize from file /etc/freeradius/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "brudas", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop rlm_ldap (ldap): Reserved connection (0) (0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (0) ldap: --> (uid=brudas) (0) ldap: Performing search in "ou=users,dc=office,dc=local" with filter "(uid=brudas)", scope "sub" (0) ldap: Waiting for search result... (0) ldap: User object found at DN "cn=Rudas Bogdan,ou=users,dc=office,dc=local" (0) ldap: Processing user attributes *(0) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute* (0) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (0) rlm_ldap (ldap): Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.office.local:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (0) [ldap] = ok (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) Post-Auth-Type REJECT { (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> brudas (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) [eap] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # Post-Auth-Type REJECT = updated When I use admin user account (which can read password hashes) for initial bind, authentication test with *radtest *works well, but it is not what I want to do. I want to keep my OpenLDAP password policy working, this requires true LDAP bind attempt with credential of end-user. My final destination is EAP-TTLS with PAP inside. Please, help me to establish desired LDAP authorization schema. As far as I know it was possible in FreeRadius 2.1.x and I believe some additional configuration required here. Thank you. -- Bogdan Rudas Head of Minsk IT Support Department Exadel Inc. http://www.exadel.com/ E-mail: brudas(a)exadel.com Skype ID: bogdan.rudas -- CONFIDENTIALITY NOTICE: This email and files attached to it are confidential. If you are not the intended recipient you are hereby notified that using, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If you have received this email in error please notify the sender and delete this email.

2 2

FreeRadius reboot needed on adding a NAS ?
by Frederic Fichter 05 Sep '16

05 Sep '16

Hi gang, I thought - but could not remember where I've read/dreamt that - that NAS defined within a SQL db could be added or removed dynamically (i.e. without the need to stop/start FreeRADIUS) ? Doesn't look to be the case in my lab. OpenWRT NAS, FreeRADIUS 3.0.11. On inserting a new NAS in the NAS table (MySQL db), requests are ignored by FreeRADIUS (as they come from an unknown NAS). Reloading (kill -HUP) the FreeRADIUS process doesn't change the problem, restarting the FreeRADIUS process solves it. Is this by design ? Any workaround available to avoid restarting FreeRADIUS everytime we add a NAS ? Thanks a lot for your help ! Best, Fred

3 2

SSH auth with FreeRADIUS
by Janis Heller 04 Sep '16

04 Sep '16

I would like to use FreeRADIUS to handle all SSH logins to my servers. Of course a „emergency“ login with a user registered on the server should be possible too (in case of RADIUS server is offline etc.). My /etc/pam.d/sshd looks like: # PAM configuration for the Secure Shell service auth sufficient pam_radius_auth.so # Standard Un*x authentication. #@include common-auth # Disallow non-root logins when /etc/nologin exists. #account required pam_nologin.so Now when I try to login as for example user test, the following code is shown at RADIUS debug: Ready to process requests (10) Received Access-Request Id 151 from XY to XY:1812 length 90 (10) User-Name = "test" (10) User-Password = "\010\n\r\177INCORRECT" (10) NAS-IP-Address = XY (10) NAS-Identifier = "sshd" (10) NAS-Port = 22688 (10) NAS-Port-Type = Virtual (10) Service-Type = Authenticate-Only (10) Calling-Station-Id = „XY" (10) # Executing section authorize from file /etc/freeradius/sites-enabled/default (10) authorize { rlm_rest (rest): Closing connection (18): Hit idle_timeout, was idle for 151 seconds rlm_rest (rest): You probably need to lower "min" rlm_rest (rest): Closing connection (19): Hit idle_timeout, was idle for 151 seconds rlm_rest (rest): You probably need to lower "min" rlm_rest (rest): 0 of 0 connections in use. You may need to increase "spare" rlm_rest (rest): Opening additional connection (20), 1 of 32 pending slots used rlm_rest (rest): Connecting to "http://XY" rlm_rest (rest): Reserved connection (20) (10) rest: Expanding URI components (10) rest: EXPAND http://XY (10) rest: --> http://XY (10) rest: EXPAND /demo/%{User-Name}/%{User-Password} (10) rest: --> /demo/test/%08%0A%0D%7FINCORRECT (10) rest: Sending HTTP GET to "http://XY/demo/test/%08%0A%0D%7FINCORRECT" (10) rest: Processing response header (10) rest: Status : 200 (OK) (10) rest: Type : json (application/json) (10) rest: Parsing attribute "control:Auth-Type" (10) rest: EXPAND Reject (10) rest: --> Reject (10) rest: Auth-Type := Reject rlm_rest (rest): Released connection (20) rlm_rest (rest): Need 2 more connections to reach 5 spares rlm_rest (rest): Opening additional connection (21), 1 of 31 pending slots used rlm_rest (rest): Connecting to "http://XY" (10) [rest] = updated (10) } # authorize = updated (10) Found Auth-Type = Reject (10) Auth-Type = Reject, rejecting user (10) Failed to authenticate the user (10) WARNING: Unprintable characters in the password. Double-check the shared secret on the server and the NAS! It seems like there is some kind of PAM module running before the RADIUS pam module. Any idea how to get this fixed? Looking into my sshd file of RADIUS I can’t see a pam module running before. -All the best;

2 1

Adding additional password encryption options
by Laurens Vets 03 Sep '16

03 Sep '16

Hello list, Is it possible to add additional password encryption options to FreeRADIUS so that the user database can be used as a user/password store (For instance PBKDF2 or scrypt)? When I look at "man rlm_pap", the amount of encryption options for passwords are limited when FreeRADIUS is your only user database. I'm creating a POC where users can register for an account to use certain services (accessible via radius authentication) and I'm trying to only use the FreeRADIUS mysql database as a backend to keep it simple, but the password encryption methods aren't considered secure by today's standards. Short of maintaining 2 databases with user information, how are people on the list handling these cases or is my use case a bit out of the ordinary?

4 4

Accounting doubt
by Tiago 02 Sep '16

02 Sep '16

Hello everyone, I've noted a few accounting records that AcctStartTime is newer than AcctStopTime. Example: StartTime = 2016-08-25 23:30:05 StopTime = 2016-08-25 23:29:03 I was wondering what could cause that? Thanks

3 4

EAP-TTLS Not working
by Matthew Pulis 02 Sep '16

02 Sep '16

Dear friends, I am trying to get EAP-TTLS working but to no avail. I am using Android tablet to test this WiFi connection. These are the settings: EAP method: TTLS. Phase 2 authentication: None. CA certificate (unspecified). Identity: mpulis. Anonymous identity: <BLANK> and Password: openldap. I have followed these tutorials for the task: http://www.sosdg.org/unifi/freeradius and http://deployingradius.com/documents/configuration/certificates.html Any pointers as to where should I start searching for the bug please? Thanks and best regards The user if tested using radtest works find as per below: radius@radius:~$ radtest mpulis openldap localhost 1812 testing456 Sent Access-Request Id 95 from 0.0.0.0:39322 to 127.0.0.1:1812 length 76 User-Name = "mpulis" User-Password = "openldap" NAS-IP-Address = 127.0.1.1 NAS-Port = 1812 Message-Authenticator = 0x00 Cleartext-Password = "openldap" Received Access-Accept Id 95 from 127.0.0.1:1812 to 0.0.0.0:0 length 36 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = 802 Tunnel-Private-Group-Id:0 = "11" This is the log: radius@daloradius:/etc/freeradius/mods-enabled$ sudo freeradius -X Server was built with: accounting : yes authentication : yes ascend-binary-attributes : yes coa : yes control-socket : yes detail : yes dhcp : yes dynamic-clients : yes osfc2 : no proxy : yes regex-pcre : no regex-posix : yes regex-posix-extended : yes session-management : yes stats : yes tcp : yes threads : yes tls : yes unlang : yes vmps : yes developer : no Server core libs: freeradius-server : 3.0.11 talloc : 2.0.* ssl : 1.0.2g release Endianness: little Compilation flags: cppflags : -Wdate-time -D_FORTIFY_SOURCE=2 cflags : -I/build/freeradius-G88Mfz/freeradius-3.0.11 -I/build/freeradius-G88Mfz/freeradius-3.0.11/src -include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/autoconf.h -include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/build.h -include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/features.h -include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/radpaths.h -fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -O2 -Wall -std=c99 -D_GNU_SOURCE -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -DNDEBUG -DIS_MODULE=1 ldflags : -Wl,-Bsymbolic-functions -Wl,-z,relro libs : -lcrypto -lssl -ltalloc -lcap -lnsl -lresolv -ldl -lpthread -lreadline Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/ldap including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/replicate including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/operator-name including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 192.168.100.0/24 { require_message_authenticator = no secret = <<< secret >>> shortname = "NAS" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 192.168.100.0/24. Please fix your configuration Support for old-style clients will be removed in a future release Debugger not attached # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = eap # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap ldap { server = "localhost" identity = "cn=admin,dc=seminary,dc=local" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "ou=SeminaryOU,dc=seminary,dc=local" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate instantiate { } # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20442 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} Ignoring "sql" (see raddb/mods-available/README.rst) } # server inner-tunnel server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 38374 Listening on proxy address :: port 37379 Ready to process requests (0) Received Access-Request Id 9 from 192.168.100.110:52775 to 192.168.100.201:1812 length 165 (0) User-Name = "mpulis" (0) NAS-Identifier = "802aa849c3a3" (0) NAS-Port = 0 (0) Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi" (0) Calling-Station-Id = "B0-DF-3A-7C-23-5E" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) EAP-Message = 0x02ba000b016d70756c6973 (0) Message-Authenticator = 0xaaef39af5f9edef0ef2ad9504b9c5bb0 (0) # Executing section authorize from file /etc/freeradius/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "mpulis", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 186 length 11 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 187 length 22 (0) eap: EAP session adding &reply:State = 0x104c8eb010f78ae8 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) Sent Access-Challenge Id 9 from 192.168.100.201:1812 to 192.168.100.110:52775 length 0 (0) EAP-Message = 0x01bb00160410348177de91c185206602fa64ec1f1d91 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x104c8eb010f78ae8aa68bc37dd34ca62 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 10 from 192.168.100.110:52775 to 192.168.100.201:1812 length 178 (1) User-Name = "mpulis" (1) NAS-Identifier = "802aa849c3a3" (1) NAS-Port = 0 (1) Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi" (1) Calling-Station-Id = "B0-DF-3A-7C-23-5E" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) EAP-Message = 0x02bb00060315 (1) State = 0x104c8eb010f78ae8aa68bc37dd34ca62 (1) Message-Authenticator = 0x2135a54adb340c1b4102b16da3655606 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "mpulis", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 187 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop rlm_ldap (ldap): Reserved connection (0) (1) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (1) ldap: --> (cn=mpulis) (1) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=mpulis)", scope "sub" (1) ldap: Waiting for search result... (1) ldap: User object found at DN "cn=mpulis,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (1) ldap: Processing user attributes (1) ldap: control:Password-With-Header += '{ssha}VlINJtlRL+9CuOK5itOeTIvRfwKRSNj9xllpiQ==' rlm_ldap (ldap): Released connection (0) rlm_ldap (ldap): Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) [ldap] = updated (1) [expiration] = noop (1) [logintime] = noop (1) pap: Converted: Password-With-Header -> SSHA1-Password (1) pap: Removing &control:Password-With-Header (1) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28 bytes (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x104c8eb010f78ae8 (1) eap: Finished EAP session with state 0x104c8eb010f78ae8 (1) eap: Previous EAP request found for state 0x104c8eb010f78ae8, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Initiating new EAP-TLS session (1) eap_ttls: Flushing SSL sessions (of #0) (1) eap_ttls: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 188 length 6 (1) eap: EAP session adding &reply:State = 0x104c8eb011f09be8 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) Sent Access-Challenge Id 10 from 192.168.100.201:1812 to 192.168.100.110:52775 length 0 (1) EAP-Message = 0x01bc00061520 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x104c8eb011f09be8aa68bc37dd34ca62 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 11 from 192.168.100.110:52775 to 192.168.100.201:1812 length 364 (2) User-Name = "mpulis" (2) NAS-Identifier = "802aa849c3a3" (2) NAS-Port = 0 (2) Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi" (2) Calling-Station-Id = "B0-DF-3A-7C-23-5E" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) EAP-Message = 0x02bc00c0150016030100b5010000b10301635e04e1f20347ded5351b49fab63311368cc67eb2b49527653206d0cb46db62000048c014c00a00390038c00fc0050035c013c00900330032c00ec004002fc011c007c00cc00200050004c012c00800160013c00dc003000a00150012000900140011000800 (2) State = 0x104c8eb011f09be8aa68bc37dd34ca62 (2) Message-Authenticator = 0xc2a0353f1c22341ba7578ac17036fafb (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "mpulis", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 188 length 192 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x104c8eb011f09be8 (2) eap: Finished EAP session with state 0x104c8eb011f09be8 (2) eap: Previous EAP request found for state 0x104c8eb011f09be8, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: Continuing EAP-TLS (2) eap_ttls: [eaptls verify] = ok (2) eap_ttls: Done initial handshake (2) eap_ttls: (other): before/accept initialization (2) eap_ttls: TLS_accept: before/accept initialization (2) eap_ttls: <<< recv TLS 1.0 Handshake [length 00b5], ClientHello (2) eap_ttls: TLS_accept: unknown state (2) eap_ttls: >>> send TLS 1.0 Handshake [length 0059], ServerHello (2) eap_ttls: TLS_accept: unknown state (2) eap_ttls: >>> send TLS 1.0 Handshake [length 0973], Certificate (2) eap_ttls: TLS_accept: unknown state (2) eap_ttls: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange (2) eap_ttls: TLS_accept: unknown state (2) eap_ttls: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone (2) eap_ttls: TLS_accept: unknown state (2) eap_ttls: TLS_accept: unknown state (2) eap_ttls: TLS_accept: unknown state (2) eap_ttls: TLS_accept: Need to read more data: unknown state (2) eap_ttls: TLS_accept: Need to read more data: unknown state (2) eap_ttls: In SSL Handshake Phase (2) eap_ttls: In SSL Accept mode (2) eap_ttls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 189 length 1004 (2) eap: EAP session adding &reply:State = 0x104c8eb012f19be8 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) Sent Access-Challenge Id 11 from 192.168.100.201:1812 to 192.168.100.110:52775 length 0 (2) EAP-Message = 0x01bd03ec15c000000b2f160301005902000055030133073b184afb1feef297f3164815c21099158983f83ee7f25eb3821fd31703f720c599ffe4eaa786771dc7974e667498641e729025b153959071566d3fe4ec6e25c01400000dff01000100000b00040300010216030109730b00096f00096c000420 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x104c8eb012f19be8aa68bc37dd34ca62 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 12 from 192.168.100.110:52775 to 192.168.100.201:1812 length 178 (3) User-Name = "mpulis" (3) NAS-Identifier = "802aa849c3a3" (3) NAS-Port = 0 (3) Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi" (3) Calling-Station-Id = "B0-DF-3A-7C-23-5E" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) EAP-Message = 0x02bd00061500 (3) State = 0x104c8eb012f19be8aa68bc37dd34ca62 (3) Message-Authenticator = 0xd8215c926890c9999a95385be24f1710 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "mpulis", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 189 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x104c8eb012f19be8 (3) eap: Finished EAP session with state 0x104c8eb012f19be8 (3) eap: Previous EAP request found for state 0x104c8eb012f19be8, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: Continuing EAP-TLS (3) eap_ttls: Peer ACKed our handshake fragment (3) eap_ttls: [eaptls verify] = request (3) eap_ttls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 190 length 1004 (3) eap: EAP session adding &reply:State = 0x104c8eb013f29be8 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) Sent Access-Challenge Id 12 from 192.168.100.201:1812 to 192.168.100.110:52775 length 0 (3) EAP-Message = 0x01be03ec15c000000b2fb3d95dd2ed6bc14f8008ac4ccb42e7eb0200a8d70b9a3d9e451cf4e0f645302d933d25af330480c89609c676a8b21f5463d0d83293c3d96e1f52034ec62a147f95d27b9a6f34ab0a97a3b7a366601166a86c0409ece2b9ddc79831d2c39f79903774d273ae6afca66797b43da5 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x104c8eb013f29be8aa68bc37dd34ca62 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 13 from 192.168.100.110:52775 to 192.168.100.201:1812 length 178 (4) User-Name = "mpulis" (4) NAS-Identifier = "802aa849c3a3" (4) NAS-Port = 0 (4) Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi" (4) Calling-Station-Id = "B0-DF-3A-7C-23-5E" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) EAP-Message = 0x02be00061500 (4) State = 0x104c8eb013f29be8aa68bc37dd34ca62 (4) Message-Authenticator = 0x15d667f1ad7c6d5a1a586f2c8be1eb53 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "mpulis", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 190 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x104c8eb013f29be8 (4) eap: Finished EAP session with state 0x104c8eb013f29be8 (4) eap: Previous EAP request found for state 0x104c8eb013f29be8, released from the list (4) eap: Peer sent packet with method EAP TTLS (21) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: Authenticate (4) eap_ttls: Continuing EAP-TLS (4) eap_ttls: Peer ACKed our handshake fragment (4) eap_ttls: [eaptls verify] = request (4) eap_ttls: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 191 length 885 (4) eap: EAP session adding &reply:State = 0x104c8eb014f39be8 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) Sent Access-Challenge Id 13 from 192.168.100.201:1812 to 192.168.100.110:52775 length 0 (4) EAP-Message = 0x01bf0375158000000b2f13024d54310e300c06035504080c0552616261743112301006035504070c0954616c2d566972747531223020060355040a0c195468652041726368626973686f70732053656d696e6172792e3128302606092a864886f70d0109011619746563686e6963616c4073656d696e61 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x104c8eb014f39be8aa68bc37dd34ca62 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 14 from 192.168.100.110:52775 to 192.168.100.201:1812 length 312 (5) User-Name = "mpulis" (5) NAS-Identifier = "802aa849c3a3" (5) NAS-Port = 0 (5) Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi" (5) Calling-Station-Id = "B0-DF-3A-7C-23-5E" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) EAP-Message = 0x02bf008c150016030100461000004241044ee56b6f046cd16b73ae61e224938e5bb3f38ecadac2fd7a2ea97c2de6ea60885cddc0684187a05ff85c680993523a0b6582479493337b6bace1e0e9fb4d3dce140301000101160301003071587e3731e84b9e00b808d0287db676e633baabd13d2afb5c6f2d (5) State = 0x104c8eb014f39be8aa68bc37dd34ca62 (5) Message-Authenticator = 0x761590df4f7736aa3eba48c638fc867c (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "mpulis", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 191 length 140 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x104c8eb014f39be8 (5) eap: Finished EAP session with state 0x104c8eb014f39be8 (5) eap: Previous EAP request found for state 0x104c8eb014f39be8, released from the list (5) eap: Peer sent packet with method EAP TTLS (21) (5) eap: Calling submodule eap_ttls to process data (5) eap_ttls: Authenticate (5) eap_ttls: Continuing EAP-TLS (5) eap_ttls: [eaptls verify] = ok (5) eap_ttls: Done initial handshake (5) eap_ttls: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange (5) eap_ttls: TLS_accept: unknown state (5) eap_ttls: TLS_accept: unknown state (5) eap_ttls: <<< recv TLS 1.0 ChangeCipherSpec [length 0001] (5) eap_ttls: <<< recv TLS 1.0 Handshake [length 0010], Finished (5) eap_ttls: TLS_accept: unknown state (5) eap_ttls: >>> send TLS 1.0 ChangeCipherSpec [length 0001] (5) eap_ttls: TLS_accept: unknown state (5) eap_ttls: >>> send TLS 1.0 Handshake [length 0010], Finished (5) eap_ttls: TLS_accept: unknown state (5) eap_ttls: TLS_accept: unknown state (5) eap_ttls: (other): SSL negotiation finished successfully (5) eap_ttls: SSL Connection Established (5) eap_ttls: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 192 length 69 (5) eap: EAP session adding &reply:State = 0x104c8eb0158c9be8 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) Sent Access-Challenge Id 14 from 192.168.100.201:1812 to 192.168.100.110:52775 length 0 (5) EAP-Message = 0x01c0004515800000003b1403010001011603010030dc8e04fd7b6568f617df53ac0662a5c8936a3d8eeb99887cd9ce2751450d4ba3519d793bf500899329c30c5a1af6f30e (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x104c8eb0158c9be8aa68bc37dd34ca62 (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 15 from 192.168.100.110:52775 to 192.168.100.201:1812 length 231 (6) User-Name = "mpulis" (6) NAS-Identifier = "802aa849c3a3" (6) NAS-Port = 0 (6) Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi" (6) Calling-Station-Id = "B0-DF-3A-7C-23-5E" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Connect-Info = "CONNECT 0Mbps 802.11b" (6) EAP-Message = 0x02c0003b15001703010030b1343fa3ee84e0aca07d87920e79429f9606b173a4399315dcf4bb44879b25742fd75d6f8d0a0a99541d81ea38f9e023 (6) State = 0x104c8eb0158c9be8aa68bc37dd34ca62 (6) Message-Authenticator = 0x0030d6f15d315e746b958bacf91de6ae (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "mpulis", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 192 length 59 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x104c8eb0158c9be8 (6) eap: Finished EAP session with state 0x104c8eb0158c9be8 (6) eap: Previous EAP request found for state 0x104c8eb0158c9be8, released from the list (6) eap: Peer sent packet with method EAP TTLS (21) (6) eap: Calling submodule eap_ttls to process data (6) eap_ttls: Authenticate (6) eap_ttls: Continuing EAP-TLS (6) eap_ttls: [eaptls verify] = ok (6) eap_ttls: Done initial handshake (6) eap_ttls: [eaptls process] = ok (6) eap_ttls: Session established. Proceeding to decode tunneled attributes (6) eap_ttls: Got tunneled request (6) eap_ttls: EAP-Message = 0x0200000b016d70756c6973 (6) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_ttls: Got tunneled identity of mpulis (6) eap_ttls: Setting default EAP type for tunneled EAP session (6) eap_ttls: Sending tunneled request (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x0200000b016d70756c6973 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "mpulis" (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "mpulis", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 0 length 11 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Calling submodule eap_md5 to process data (6) eap_md5: Issuing MD5 Challenge (6) eap: Sending EAP Request (code 1) ID 1 length 22 (6) eap: EAP session adding &reply:State = 0x2dcb3c7c2dca38ab (6) [eap] = handled (6) } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x010100160410ec9e80ce552a991bf262b68ca81ac72e (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x2dcb3c7c2dca38ab341ae2a70b5ec88b (6) eap_ttls: Got tunneled Access-Challenge (6) eap: Sending EAP Request (code 1) ID 193 length 79 (6) eap: EAP session adding &reply:State = 0x104c8eb0168d9be8 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /etc/freeradius/sites-enabled/default (6) Sent Access-Challenge Id 15 from 192.168.100.201:1812 to 192.168.100.110:52775 length 0 (6) EAP-Message = 0x01c1004f15800000004517030100406f6bfe65010fa9323ed7a6bbf9b4fd844fee2e865ce18b5706d157564969ae8fe8e3cf28c01120e207316199b1b8516719a0b0e939c95a4d77462807695068b6 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x104c8eb0168d9be8aa68bc37dd34ca62 (6) Finished request Waking up in 4.9 seconds. (7) Received Access-Request Id 16 from 192.168.100.110:52775 to 192.168.100.201:1812 length 247 (7) User-Name = "mpulis" (7) NAS-Identifier = "802aa849c3a3" (7) NAS-Port = 0 (7) Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi" (7) Calling-Station-Id = "B0-DF-3A-7C-23-5E" (7) Framed-MTU = 1400 (7) NAS-Port-Type = Wireless-802.11 (7) Connect-Info = "CONNECT 0Mbps 802.11b" (7) EAP-Message = 0x02c1004b1500170301004048b4eadb4e11dc091be6b871f7dcd29603716d4ec6b87a22c7499a1d16ecdcce190db0546cb0912362038f87a6c9b3e3a971564e29ebb7f14bb4fb7df035f265 (7) State = 0x104c8eb0168d9be8aa68bc37dd34ca62 (7) Message-Authenticator = 0x4979edd89c7646dbb7c37729c121bd40 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "mpulis", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 193 length 75 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x2dcb3c7c2dca38ab (7) eap: Finished EAP session with state 0x104c8eb0168d9be8 (7) eap: Previous EAP request found for state 0x104c8eb0168d9be8, released from the list (7) eap: Peer sent packet with method EAP TTLS (21) (7) eap: Calling submodule eap_ttls to process data (7) eap_ttls: Authenticate (7) eap_ttls: Continuing EAP-TLS (7) eap_ttls: [eaptls verify] = ok (7) eap_ttls: Done initial handshake (7) eap_ttls: [eaptls process] = ok (7) eap_ttls: Session established. Proceeding to decode tunneled attributes (7) eap_ttls: Got tunneled request (7) eap_ttls: EAP-Message = 0x020100160410229a728db478439fed46421e54ea7160 (7) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_ttls: Sending tunneled request (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x020100160410229a728db478439fed46421e54ea7160 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "mpulis" (7) State = 0x2dcb3c7c2dca38ab341ae2a70b5ec88b (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "mpulis", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 1 length 22 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) [files] = noop rlm_ldap (ldap): Reserved connection (1) (7) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (7) ldap: --> (cn=mpulis) (7) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=mpulis)", scope "sub" (7) ldap: Waiting for search result... (7) ldap: User object found at DN "cn=mpulis,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (7) ldap: Processing user attributes (7) ldap: control:Password-With-Header += '{ssha}VlINJtlRL+9CuOK5itOeTIvRfwKRSNj9xllpiQ==' rlm_ldap (ldap): Released connection (1) (7) [ldap] = updated (7) [expiration] = noop (7) [logintime] = noop (7) pap: Converted: Password-With-Header -> SSHA1-Password (7) pap: Removing &control:Password-With-Header (7) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28 bytes (7) pap: WARNING: Auth-Type already set. Not setting to PAP (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0x2dcb3c7c2dca38ab (7) eap: Finished EAP session with state 0x2dcb3c7c2dca38ab (7) eap: Previous EAP request found for state 0x2dcb3c7c2dca38ab, released from the list (7) eap: Peer sent packet with method EAP MD5 (4) (7) eap: Calling submodule eap_md5 to process data (7) eap_md5: Cleartext-Password is required for EAP-MD5 authentication (7) eap: ERROR: Failed continuing EAP MD5 (4) session. EAP sub-module failed (7) eap: Sending EAP Failure (code 4) ID 1 length 4 (7) eap: Failed in EAP select (7) [eap] = invalid (7) } # authenticate = invalid (7) Failed to authenticate the user (7) Using Post-Auth-Type Reject (7) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (7) Post-Auth-Type REJECT { (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject: --> mpulis (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) update outer.session-state { (7) &Module-Failure-Message := &request:Module-Failure-Message -> 'eap: Failed continuing EAP MD5 (4) session. EAP sub-module failed' (7) } # update outer.session-state = noop (7) } # Post-Auth-Type REJECT = updated (7) } # server inner-tunnel (7) Virtual server sending reply (7) EAP-Message = 0x04010004 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_ttls: Got tunneled Access-Reject (7) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed (7) eap: Sending EAP Failure (code 4) ID 193 length 4 (7) eap: Failed in EAP select (7) [eap] = invalid (7) } # authenticate = invalid (7) Failed to authenticate the user (7) Using Post-Auth-Type Reject (7) # Executing group from file /etc/freeradius/sites-enabled/default (7) Post-Auth-Type REJECT { (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject: --> mpulis (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) [eap] = noop (7) policy remove_reply_message_if_eap { (7) if (&reply:EAP-Message && &reply:Reply-Message) { (7) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (7) else { (7) [noop] = noop (7) } # else = noop (7) } # policy remove_reply_message_if_eap = noop (7) } # Post-Auth-Type REJECT = updated (7) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (7) Sending delayed response (7) Sent Access-Reject Id 16 from 192.168.100.201:1812 to 192.168.100.110:52775 length 44 (7) EAP-Message = 0x04c10004 (7) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 9 with timestamp +10 (1) Cleaning up request packet ID 10 with timestamp +10 (2) Cleaning up request packet ID 11 with timestamp +10 (3) Cleaning up request packet ID 12 with timestamp +10 (4) Cleaning up request packet ID 13 with timestamp +10 (5) Cleaning up request packet ID 14 with timestamp +10 (6) Cleaning up request packet ID 15 with timestamp +10 (7) Cleaning up request packet ID 16 with timestamp +10 Ready to process requests Matthew Pulis web: www.matthewpulis.info mob: +356 79539404

5 6