- Freeradius-Users - lists.freeradius.org

Captive portal with freeradius
by Kouata Modibo 28 Jun '16

28 Jun '16

Hi, I'm using FreeRADIUS Version 2.2.5 I would like to use the captive portal feature with freeradius. In other word when freeradius can't authentificate an user, before reject, it redirects user to a captive portal for authentificating it, (accept according of this result) like ldap module. It is possible? thank you.

2 1

Failed in SSLv3 read client certificate A
by Michael Martinez 28 Jun '16

28 Jun '16

Trying to use EAP-TLS to authenticate an iPad on radius going through a wireless access point that is controlled by a Lan controller Cisco 2504. Seeing the following in the radius logs: (48) eap_tls: ERROR: TLS_accept: Failed in SSLv3 read client certificate A (48) eap_tls: ERROR: SSL says: error:140940E5:SSL routines:ssl3_read_bytes:ssl handshake failure (48) eap_tls: ERROR: SSL_read failed in a system call (-1), TLS session failed (48) eap_tls: ERROR: TLS receive handshake failed during operation My questions: #1) I'm hoping someone may have experienced this before and knows exactly how to fix it. "Oh yeah, you need to do blah on the iPad" or "Oh you need to trust the CA on the lan controller" or whatever #2) Is there a way to get more information from radius? It's unclear whether Radius (a) received the client certificate but does not understand it, or (b) did not receive the client certificate at all -- --- Michael Martinez http://www.michael--martinez.com

6 19

Accept both machine auth and user with domain auth
by Trevor Jennings 27 Jun '16

27 Jun '16

Hello, I am trying to configure freeradius to accept either machine auth (using host/<user>.<domain>) or user authentication (user@domain when they come from Eduroam). Previously I had in the mschap module for the ntlm_auth:- "--username=%{mschap:User-Name}" Which works fine for users without domains and machine authentication. For Eduroam, because they have the domain included, I decided to replace mschap:User-Name with %{Stripped-User-Name} which works except it broke machine authentication. While researching this issue, I came across a configuration for ntlm_auth using the following:- "--username-=%{%{Stripped-User-Name}:-%{mschap:User-Name}}" Which I assume means if Stripped-User-Name is null, then use mschap:User-Name? I do not understand what I would need to do to achieve this. Would I need to set 'nostrip' under the realm for the domain of that user authenticating? Cheers, - Trevor

5 5

freeradius auth in win AD
by Zenon Matuszyk 27 Jun '16

27 Jun '16

Hello, I have a little problem with auth in Windows AD by using userPrincipalName (using samAccountName works fine). In mschap file i have: ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{User-Name}} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" and ldap file: filter = "(userPrincipalName=%{%{Stripped-User-Name}:-%{User-Name}})" In debug I see: rad_recv: Access-Request packet from host 10.65.100.41 port 32775, id=207, length=318 User-Name = "aa.aa(a)stud.wcc.domain.pl" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "b4-74-9f-ea-2a-1e" Called-Station-Id = "54-78-1a-5f-08-e0:RADIUS-TEST" NAS-Port = 2 Cisco-AVPair = "audit-session-id=0a41642900000d4a57628ef2" Acct-Session-Id = "57628ef2/b4:74:9f:ea:2a:1e/3674" NAS-IP-Address = 10.65.100.41 NAS-Identifier = "WLC-1-wcc-Mat13-MDF-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x0203001d0161612e616140737475642e6173702e6b72616b6f772e706c Message-Authenticator = 0x398163ea5774aa56b4a9a5bb7f1ec443 # Executing section authorize from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 3 length 29 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [ldap] Entering ldap_groupcmp() [files] expand: dc=wcc,dc=local -> dc=wcc,dc=local [files] expand: %{Stripped-User-Name} -> [files] ... expanding second conditional [files] expand: %{User-Name} -> aa.aa(a)stud.wcc.domain.pl [files] expand: (userPrincipalName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (userPrincipalName=aa.aa(a)stud.wcc.domain.pl) [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to pdc.wcc.local:389, authentication 0 [ldap] bind as cn=freeradius,ou=Services,dc=wcc,dc=local/rad--wcc--02 to pdc.wcc.local:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in dc=wcc,dc=local, with filter (userPrincipalName=aa.aa(a)stud.wcc.domain.pl) [ldap] ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{control:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{control:Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))(&(objectClass=GroupOfUniqueNames)(uniquemember=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))) [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=wcc,dc=local, with filter (&(cn=workers)(|(&(objectClass=GroupOfNames)(member=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))(&(objectClass=GroupOfUniqueNames)(uniquemember=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal)))) [ldap] object not found [ldap] ldap_release_conn: Release Id: 0 [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in CN=aa aa,CN=Users,DC=wcc,DC=local, with filter (objectclass=*) [ldap] performing search in CN=students,CN=Users,DC=wcc,DC=local, with filter (cn=workers) [ldap] object not found rlm_ldap::groupcmp: Group workers not found or user not a member [ldap] ldap_release_conn: Release Id: 0 [ldap] Entering ldap_groupcmp() [files] expand: dc=wcc,dc=local -> dc=wcc,dc=local [files] expand: (|(&(objectClass=GroupOfNames)(member=%{control:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{control:Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))(&(objectClass=GroupOfUniqueNames)(uniquemember=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))) [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=wcc,dc=local, with filter (&(cn=students)(|(&(objectClass=GroupOfNames)(member=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))(&(objectClass=GroupOfUniqueNames)(uniquemember=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal)))) [ldap] object not found [ldap] ldap_release_conn: Release Id: 0 [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in CN=aa aa,CN=Users,DC=wcc,DC=local, with filter (objectclass=*) [ldap] performing search in CN=students,CN=Users,DC=wcc,DC=local, with filter (cn=students) rlm_ldap::ldap_groupcmp: User found in group students [ldap] ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 8 ++[files] returns ok [ldap] performing user authorization for aa.aa(a)stud.wcc.domain.pl [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> aa.aa(a)stud.wcc.domain.pl [ldap] expand: (userPrincipalName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (userPrincipalName=aa.aa(a)stud.wcc.domain.pl) [ldap] expand: dc=wcc,dc=local -> dc=wcc,dc=local [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=wcc,dc=local, with filter (userPrincipalName=aa.aa(a)stud.wcc.domain.pl) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] looking for reply items in directory... [ldap] sAMAccountName -> AD-Samaccountname = "s87030702814" WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user aa.aa(a)stud.wcc.domain.pl authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 207 to 10.65.100.41 port 32775 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "216" EAP-Message = 0x01040016041018835bd878d0921cb20627ef9ffb1eac Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe4e07f21e4e47b7995348cff618d76b9 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.65.100.41 port 32775, id=208, length=313 User-Name = "aa.aa(a)stud.wcc.domain.pl" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "b4-74-9f-ea-2a-1e" Called-Station-Id = "54-78-1a-5f-08-e0:RADIUS-TEST" NAS-Port = 2 Cisco-AVPair = "audit-session-id=0a41642900000d4a57628ef2" Acct-Session-Id = "57628ef2/b4:74:9f:ea:2a:1e/3674" NAS-IP-Address = 10.65.100.41 NAS-Identifier = "WLC-1-wcc-Mat13-MDF-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020400060319 State = 0xe4e07f21e4e47b7995348cff618d76b9 Message-Authenticator = 0xee09ae2d1c397db4c44fa8ef0ada48ae # Executing section authorize from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 4 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [ldap] Entering ldap_groupcmp() [files] expand: dc=wcc,dc=local -> dc=wcc,dc=local [files] expand: %{Stripped-User-Name} -> [files] ... expanding second conditional [files] expand: %{User-Name} -> aa.aa(a)stud.wcc.domain.pl [files] expand: (userPrincipalName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (userPrincipalName=aa.aa(a)stud.wcc.domain.pl) [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=wcc,dc=local, with filter (userPrincipalName=aa.aa(a)stud.wcc.domain.pl) [ldap] ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{control:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{control:Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))(&(objectClass=GroupOfUniqueNames)(uniquemember=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))) [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=wcc,dc=local, with filter (&(cn=workers)(|(&(objectClass=GroupOfNames)(member=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))(&(objectClass=GroupOfUniqueNames)(uniquemember=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal)))) [ldap] object not found [ldap] ldap_release_conn: Release Id: 0 [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in CN=aa aa,CN=Users,DC=wcc,DC=local, with filter (objectclass=*) [ldap] performing search in CN=students,CN=Users,DC=wcc,DC=local, with filter (cn=workers) [ldap] object not found rlm_ldap::groupcmp: Group workers not found or user not a member [ldap] ldap_release_conn: Release Id: 0 [ldap] Entering ldap_groupcmp() [files] expand: dc=wcc,dc=local -> dc=wcc,dc=local [files] expand: (|(&(objectClass=GroupOfNames)(member=%{control:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{control:Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))(&(objectClass=GroupOfUniqueNames)(uniquemember=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))) [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=wcc,dc=local, with filter (&(cn=students)(|(&(objectClass=GroupOfNames)(member=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))(&(objectClass=GroupOfUniqueNames)(uniquemember=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal)))) [ldap] object not found [ldap] ldap_release_conn: Release Id: 0 [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in CN=aa aa,CN=Users,DC=wcc,DC=local, with filter (objectclass=*) [ldap] performing search in CN=students,CN=Users,DC=wcc,DC=local, with filter (cn=students) rlm_ldap::ldap_groupcmp: User found in group students [ldap] ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 8 ++[files] returns ok [ldap] performing user authorization for aa.aa(a)stud.wcc.domain.pl [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> aa.aa(a)stud.wcc.domain.pl [ldap] expand: (userPrincipalName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (userPrincipalName=aa.aa(a)stud.wcc.domain.pl) [ldap] expand: dc=wcc,dc=local -> dc=wcc,dc=local [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=wcc,dc=local, with filter (userPrincipalName=aa.aa(a)stud.wcc.domain.pl) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] looking for reply items in directory... [ldap] sAMAccountName -> AD-Samaccountname = "s87030702814" WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user aa.aa(a)stud.wcc.domain.pl authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 208 to 10.65.100.41 port 32775 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "216" EAP-Message = 0x010500061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe4e07f21e5e5667995348cff618d76b9 Finished request 1. Going to the next request Waking up in 3.9 seconds. rad_recv: Access-Request packet from host 10.65.100.41 port 32775, id=209, length=429 User-Name = "aa.aa(a)stud.wcc.domain.pl" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "b4-74-9f-ea-2a-1e" Called-Station-Id = "54-78-1a-5f-08-e0:RADIUS-TEST" NAS-Port = 2 Cisco-AVPair = "audit-session-id=0a41642900000d4a57628ef2" Acct-Session-Id = "57628ef2/b4:74:9f:ea:2a:1e/3674" NAS-IP-Address = 10.65.100.41 NAS-Identifier = "WLC-1-wcc-Mat13-MDF-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x0205007a198000000070160301006b01000067030157628ed30f67b761e282d085d72f59adfd847fc69ee371cc28ea1f91446a23bc000018c014c0130035002fc00ac00900380032000a00130005000401000026000500050100000000000a0006000400170018000b000201000023000000170000ff01000100 State = 0xe4e07f21e5e5667995348cff618d76b9 Message-Authenticator = 0xcf052b361d54c7fb8dbea484cc3bd8de # Executing section authorize from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 5 length 122 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 112 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 006b], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0039], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 078d], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 00cb], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 209 to 10.65.100.41 port 32775 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x636820696d2e204a616e6120 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe4e07f21e6e6667995348cff618d76b9 Finished request 2. Going to the next request Waking up in 3.9 seconds. rad_recv: Access-Request packet from host 10.65.100.41 port 32775, id=210, length=313 User-Name = "aa.aa(a)stud.wcc.domain.pl" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "b4-74-9f-ea-2a-1e" Called-Station-Id = "54-78-1a-5f-08-e0:RADIUS-TEST" NAS-Port = 2 Cisco-AVPair = "audit-session-id=0a41642900000d4a57628ef2" Acct-Session-Id = "57628ef2/b4:74:9f:ea:2a:1e/3674" NAS-IP-Address = 10.65.100.41 NAS-Identifier = "WLC-1-wcc-Mat13-MDF-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020600061900 State = 0xe4e07f21e6e6667995348cff618d76b9 Message-Authenticator = 0x00d087c8c9b2868d9b3d87e1cc5bcce0 # Executing section authorize from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 6 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 210 to 10.65.100.41 port 32775 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x1b0d750d85d4484ecfee6d1b11e5390203010001a382013b30820137301d0603551d0e041604141677035f5e86f248944b24b93a5292e9568b1dc8308201060603551d230481fe3081fb80141677035f5e86f248944b24b93a5292e9568b1dc8a181d7a481d43081d1310b300906035504061302504c311330110603550408130a4d616c6f706f6c736b61310f300d060355040713064b72616b6f77313c303a060355040a1333416b6164656d696120537a74756b205069656b6e79636820696d2e204a616e61204d6174656a6b692077204b72616b6f77696531133011060355040b130a415350204b72616b6f77312830260603550403131f43656e EAP-Message = 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 EAP-Message = 0xb2c02889833be395 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe4e07f21e7e7667995348cff618d76b9 Finished request 3. Going to the next request Waking up in 3.9 seconds. rad_recv: Access-Request packet from host 10.65.100.41 port 32775, id=211, length=313 User-Name = "aa.aa(a)stud.wcc.domain.pl" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "b4-74-9f-ea-2a-1e" Called-Station-Id = "54-78-1a-5f-08-e0:RADIUS-TEST" NAS-Port = 2 Cisco-AVPair = "audit-session-id=0a41642900000d4a57628ef2" Acct-Session-Id = "57628ef2/b4:74:9f:ea:2a:1e/3674" NAS-IP-Address = 10.65.100.41 NAS-Identifier = "WLC-1-wcc-Mat13-MDF-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020700061900 State = 0xe4e07f21e7e7667995348cff618d76b9 Message-Authenticator = 0x01ec9033518a72159b2dea4263cd2b77 # Executing section authorize from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 7 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 211 to 10.65.100.41 port 32775 EAP-Message = 0x010800c319007d817762afcedcd239ec14513684f7f94d191494faccaa06effad9e58d39820e4f5647daa052abd7e7b49074cbfacb3bd2e1008066b7e15b1e17ba1642140c22bba1027378e36599e026c9eca4b4b3d904e5a5fd45f5751be89edcd9a4c22da741ac95da243fbdb7e39730fd9c50fdd1658591c0bbf771333f4a7cd1eb0105c985cc8df4e627aeca1f02e7b4c713741eb2165d5e181545175e76bf823f6dff2781dea2ee0736037352635b7398d0e7e9b2e157fe16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe4e07f21e0e8667995348cff618d76b9 Finished request 4. Going to the next request Waking up in 3.8 seconds. rad_recv: Access-Request packet from host 10.65.100.41 port 32775, id=212, length=451 User-Name = "aa.aa(a)stud.wcc.domain.pl" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "b4-74-9f-ea-2a-1e" Called-Station-Id = "54-78-1a-5f-08-e0:RADIUS-TEST" NAS-Port = 2 Cisco-AVPair = "audit-session-id=0a41642900000d4a57628ef2" Acct-Session-Id = "57628ef2/b4:74:9f:ea:2a:1e/3674" NAS-IP-Address = 10.65.100.41 NAS-Identifier = "WLC-1-wcc-Mat13-MDF-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x02080090198000000086160301004610000042410403e7081c98bcda62512f4d203b9f598447197d8eb63d2adbb6a1d31bcaf8637dde11be3ddfb9091e7be0b91c333ce0b1af1f78796a25b5c02df37a0432872eea1403010001011603010030cb2050690622d017ed0a6963816b8b78cc278b9e6b166ef8094a5ae870be8b97a42f70cecc570cf8f43008896dfbbbbf State = 0xe4e07f21e0e8667995348cff618d76b9 Message-Authenticator = 0xa935f4a4d0d32ad7fcda0d8e2660fb83 # Executing section authorize from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 8 length 144 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 134 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 212 to 10.65.100.41 port 32775 EAP-Message = 0x01090041190014030100010116030100301ed6f53ea85d9c6f1c9486e2141d4a680224a377f835dcc3fcdfbdcafb604c309d2af9bce8e8e9d39ee13f6229050ac8 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe4e07f21e1e9667995348cff618d76b9 Finished request 5. Going to the next request Waking up in 3.8 seconds. rad_recv: Access-Request packet from host 10.65.100.41 port 32775, id=213, length=313 User-Name = "aa.aa(a)stud.wcc.domain.pl" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "b4-74-9f-ea-2a-1e" Called-Station-Id = "54-78-1a-5f-08-e0:RADIUS-TEST" NAS-Port = 2 Cisco-AVPair = "audit-session-id=0a41642900000d4a57628ef2" Acct-Session-Id = "57628ef2/b4:74:9f:ea:2a:1e/3674" NAS-IP-Address = 10.65.100.41 NAS-Identifier = "WLC-1-wcc-Mat13-MDF-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020900061900 State = 0xe4e07f21e1e9667995348cff618d76b9 Message-Authenticator = 0x5366466fff4c6b7bcd1d24a6f3d72b0c # Executing section authorize from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 9 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] returns handled Sending Access-Challenge of id 213 to 10.65.100.41 port 32775 EAP-Message = 0x010a002b19001703010020c623b3d76abff3c81e73899a1eb587af56e8d00f3ad966be957be1a171bb62b3 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe4e07f21e2ea667995348cff618d76b9 Finished request 6. Going to the next request Waking up in 3.8 seconds. rad_recv: Access-Request packet from host 10.65.100.41 port 32775, id=214, length=366 User-Name = "aa.aa(a)stud.wcc.domain.pl" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "b4-74-9f-ea-2a-1e" Called-Station-Id = "54-78-1a-5f-08-e0:RADIUS-TEST" NAS-Port = 2 Cisco-AVPair = "audit-session-id=0a41642900000d4a57628ef2" Acct-Session-Id = "57628ef2/b4:74:9f:ea:2a:1e/3674" NAS-IP-Address = 10.65.100.41 NAS-Identifier = "WLC-1-wcc-Mat13-MDF-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020a003b1900170301003062c1068fd1c72ce5d715510b021fb2920d5d8f847a99de6e5dee35df22f834e58116a0458fa2e25ae7f188f891007d34 State = 0xe4e07f21e2ea667995348cff618d76b9 Message-Authenticator = 0x6bf348b944190d74383badd3fd272279 # Executing section authorize from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 10 length 59 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - aa.aa(a)stud.wcc.domain.pl [peap] Got inner identity 'aa.aa(a)stud.wcc.domain.pl' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x020a001d0161612e616140737475642e6173702e6b72616b6f772e706c server { [peap] Setting User-Name to aa.aa(a)stud.wcc.domain.pl Sending tunneled request EAP-Message = 0x020a001d0161612e616140737475642e6173702e6b72616b6f772e706c FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "aa.aa(a)stud.wcc.domain.pl" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "b4-74-9f-ea-2a-1e" Called-Station-Id = "54-78-1a-5f-08-e0:RADIUS-TEST" NAS-Port = 2 Cisco-AVPair = "audit-session-id=0a41642900000d4a57628ef2" Acct-Session-Id = "57628ef2/b4:74:9f:ea:2a:1e/3674" NAS-IP-Address = 10.65.100.41 NAS-Identifier = "WLC-1-wcc-Mat13-MDF-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" server inner-tunnel { # Executing section authorize from file /etc/freeradius-eduroam//sites-enabled/inner-tunnel +- entering group authorize {...} ++[mschap] returns noop ++[control] returns noop [eap] EAP packet type response id 10 length 29 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [ldap] Entering ldap_groupcmp() [files] expand: dc=wcc,dc=local -> dc=wcc,dc=local [files] expand: %{Stripped-User-Name} -> [files] ... expanding second conditional [files] expand: %{User-Name} -> aa.aa(a)stud.wcc.domain.pl [files] expand: (userPrincipalName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (userPrincipalName=aa.aa(a)stud.wcc.domain.pl) [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=wcc,dc=local, with filter (userPrincipalName=aa.aa(a)stud.wcc.domain.pl) [ldap] ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{control:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{control:Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))(&(objectClass=GroupOfUniqueNames)(uniquemember=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))) [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=wcc,dc=local, with filter (&(cn=workers)(|(&(objectClass=GroupOfNames)(member=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))(&(objectClass=GroupOfUniqueNames)(uniquemember=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal)))) [ldap] object not found [ldap] ldap_release_conn: Release Id: 0 [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in CN=aa aa,CN=Users,DC=wcc,DC=local, with filter (objectclass=*) [ldap] performing search in CN=students,CN=Users,DC=wcc,DC=local, with filter (cn=workers) [ldap] object not found rlm_ldap::groupcmp: Group workers not found or user not a member [ldap] ldap_release_conn: Release Id: 0 [ldap] Entering ldap_groupcmp() [files] expand: dc=wcc,dc=local -> dc=wcc,dc=local [files] expand: (|(&(objectClass=GroupOfNames)(member=%{control:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{control:Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))(&(objectClass=GroupOfUniqueNames)(uniquemember=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))) [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=wcc,dc=local, with filter (&(cn=students)(|(&(objectClass=GroupOfNames)(member=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))(&(objectClass=GroupOfUniqueNames)(uniquemember=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal)))) [ldap] object not found [ldap] ldap_release_conn: Release Id: 0 [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in CN=aa aa,CN=Users,DC=wcc,DC=local, with filter (objectclass=*) [ldap] performing search in CN=students,CN=Users,DC=wcc,DC=local, with filter (cn=students) rlm_ldap::ldap_groupcmp: User found in group students [ldap] ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 8 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = ntlm_auth Found Auth-Type = EAP Warning: Found 2 auth-types on request for user 'aa.aa(a)stud.wcc.domain.pl' # Executing group from file /etc/freeradius-eduroam//sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "216" EAP-Message = 0x010b00321a010b002d109ce0b0ed27560f706b913753486d010361612e616140737475642e6173702e6b72616b6f772e706c Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf7406046f74b7ad73c0df3922cff6ba2 [peap] Got tunneled reply RADIUS code 11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "216" EAP-Message = 0x010b00321a010b002d109ce0b0ed27560f706b913753486d010361612e616140737475642e6173702e6b72616b6f772e706c Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf7406046f74b7ad73c0df3922cff6ba2 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 214 to 10.65.100.41 port 32775 EAP-Message = 0x010b005b190017030100503ae86e59fc0b91c6c5ae412b2292f1f5d6efa460ec1b01c358014be90d5006fa9b793a2e1af9e64795f54e239fd7281dd696d018c7f44b4cb2eb67ecd475cc434c473f009dba337006b1aab298ba8ad4 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe4e07f21e3eb667995348cff618d76b9 Finished request 7. Going to the next request Waking up in 2.7 seconds. rad_recv: Access-Request packet from host 10.65.100.41 port 32775, id=215, length=430 User-Name = "aa.aa(a)stud.wcc.domain.pl" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "b4-74-9f-ea-2a-1e" Called-Station-Id = "54-78-1a-5f-08-e0:RADIUS-TEST" NAS-Port = 2 Cisco-AVPair = "audit-session-id=0a41642900000d4a57628ef2" Acct-Session-Id = "57628ef2/b4:74:9f:ea:2a:1e/3674" NAS-IP-Address = 10.65.100.41 NAS-Identifier = "WLC-1-wcc-Mat13-MDF-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020b007b1900170301007093a027714c83b1c3148c0f0cb48de716b6b8527d3c24f93d9b44a02cc3dcda6daf31becba6d782b69a235c564632021dfaae14f860e1822b139394a91915dc4763438a1eb0f2c647c13c486a3562ac0c029a326c091013c0b4544e9a716599fb33ce121f27c9aedfc38e736d36a339f2 State = 0xe4e07f21e3eb667995348cff618d76b9 Message-Authenticator = 0x4aa39debfb53301591faa7194e96605e # Executing section authorize from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 11 length 123 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020b00531a020b004e315381f7e957bdb65b4cecc534fb1381090000000000000000484795e959127ad898fd4230c3e3f52cbd19297d084e00d50061612e616140737475642e6173702e6b72616b6f772e706c server { [peap] Setting User-Name to aa.aa(a)stud.wcc.domain.pl Sending tunneled request EAP-Message = 0x020b00531a020b004e315381f7e957bdb65b4cecc534fb1381090000000000000000484795e959127ad898fd4230c3e3f52cbd19297d084e00d50061612e616140737475642e6173702e6b72616b6f772e706c FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "aa.aa(a)stud.wcc.domain.pl" State = 0xf7406046f74b7ad73c0df3922cff6ba2 Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "b4-74-9f-ea-2a-1e" Called-Station-Id = "54-78-1a-5f-08-e0:RADIUS-TEST" NAS-Port = 2 Cisco-AVPair = "audit-session-id=0a41642900000d4a57628ef2" Acct-Session-Id = "57628ef2/b4:74:9f:ea:2a:1e/3674" NAS-IP-Address = 10.65.100.41 NAS-Identifier = "WLC-1-wcc-Mat13-MDF-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" server inner-tunnel { # Executing section authorize from file /etc/freeradius-eduroam//sites-enabled/inner-tunnel +- entering group authorize {...} ++[mschap] returns noop ++[control] returns noop [eap] EAP packet type response id 11 length 83 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [ldap] Entering ldap_groupcmp() [files] expand: dc=wcc,dc=local -> dc=wcc,dc=local [files] expand: %{Stripped-User-Name} -> [files] ... expanding second conditional [files] expand: %{User-Name} -> aa.aa(a)stud.wcc.domain.pl [files] expand: (userPrincipalName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (userPrincipalName=aa.aa(a)stud.wcc.domain.pl) [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=wcc,dc=local, with filter (userPrincipalName=aa.aa(a)stud.wcc.domain.pl) [ldap] ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{control:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{control:Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))(&(objectClass=GroupOfUniqueNames)(uniquemember=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))) [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=wcc,dc=local, with filter (&(cn=workers)(|(&(objectClass=GroupOfNames)(member=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))(&(objectClass=GroupOfUniqueNames)(uniquemember=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal)))) [ldap] object not found [ldap] ldap_release_conn: Release Id: 0 [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in CN=aa aa,CN=Users,DC=wcc,DC=local, with filter (objectclass=*) [ldap] performing search in CN=students,CN=Users,DC=wcc,DC=local, with filter (cn=workers) [ldap] object not found rlm_ldap::groupcmp: Group workers not found or user not a member [ldap] ldap_release_conn: Release Id: 0 [ldap] Entering ldap_groupcmp() [files] expand: dc=wcc,dc=local -> dc=wcc,dc=local [files] expand: (|(&(objectClass=GroupOfNames)(member=%{control:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{control:Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))(&(objectClass=GroupOfUniqueNames)(uniquemember=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))) [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=wcc,dc=local, with filter (&(cn=students)(|(&(objectClass=GroupOfNames)(member=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal))(&(objectClass=GroupOfUniqueNames)(uniquemember=CN\3daa aa\2cCN\3dUsers\2cDC\3dwcc\2cDC\3dlocal)))) [ldap] object not found [ldap] ldap_release_conn: Release Id: 0 [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in CN=aa aa,CN=Users,DC=wcc,DC=local, with filter (objectclass=*) [ldap] performing search in CN=students,CN=Users,DC=wcc,DC=local, with filter (cn=students) rlm_ldap::ldap_groupcmp: User found in group students [ldap] ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 8 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = ntlm_auth Found Auth-Type = EAP Warning: Found 2 auth-types on request for user 'aa.aa(a)stud.wcc.domain.pl' # Executing group from file /etc/freeradius-eduroam//sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /etc/freeradius-eduroam//sites-enabled/inner-tunnel [mschapv2] +- entering group MS-CHAP {...} [mschap] Creating challenge hash with username: aa.aa(a)stud.wcc.domain.pl [mschap] Told to do MS-CHAPv2 for aa.aa(a)stud.wcc.domain.pl with NT-Password [mschap] expand: %{Stripped-User-Name} -> [mschap] ... expanding second conditional [mschap] expand: %{User-Name} -> aa.aa(a)stud.wcc.domain.pl [mschap] expand: --username=%{%{Stripped-User-Name}:-%{User-Name}} -> --username=aa.aa(a)stud.wcc.domain.pl [mschap] Creating challenge hash with username: aa.aa(a)stud.wcc.domain.pl [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=1282528812d8f6bb [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=484795e959127ad898fd4230c3e3f52cbd19297d084e00d5 Exec-Program output: Logon failure (0xc000006d) Exec-Program-Wait: plaintext: Logon failure (0xc000006d) Exec-Program: returned: 1 [mschap] External script failed. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. Login incorrect (mschap: External script says Logon failure (0xc000006d)): [aa.aa(a)stud.wcc.domain.pl] (from client 10.65.100.41 port 2 cli b4-74-9f-ea-2a-1e via TLS tunnel) } # server inner-tunnel [peap] Got tunneled reply code 3 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "216" MS-CHAP-Error = "\013E=691 R=1" EAP-Message = 0x040b0004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "216" MS-CHAP-Error = "\013E=691 R=1" EAP-Message = 0x040b0004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 215 to 10.65.100.41 port 32775 EAP-Message = 0x010c002b1900170301002020427a067789db85515b75eca6b998b12bb6deeb76176187226b9a84520a3b05 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe4e07f21ecec667995348cff618d76b9 Finished request 8. Going to the next request Waking up in 2.0 seconds. rad_recv: Access-Request packet from host 10.65.100.41 port 32775, id=216, length=350 User-Name = "aa.aa(a)stud.wcc.domain.pl" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "b4-74-9f-ea-2a-1e" Called-Station-Id = "54-78-1a-5f-08-e0:RADIUS-TEST" NAS-Port = 2 Cisco-AVPair = "audit-session-id=0a41642900000d4a57628ef2" Acct-Session-Id = "57628ef2/b4:74:9f:ea:2a:1e/3674" NAS-IP-Address = 10.65.100.41 NAS-Identifier = "WLC-1-wcc-Mat13-MDF-1" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020c002b190017030100205085a1640815b69b53fa1a5c28367074dda54682f404abe7deb8fcd3494e92cb State = 0xe4e07f21ecec667995348cff618d76b9 Message-Authenticator = 0x2a8e923b8e2d7d08b9fdd1747d80c60d # Executing section authorize from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 12 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius-eduroam//sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv failure [peap] Received EAP-TLV response. [peap] The users session was previously rejected: returning reject (again.) [peap] *** This means you need to read the PREVIOUS messages in the debug output [peap] *** to find out the reason why the user was rejected. [peap] *** Look for "reject" or "fail". Those earlier messages will tell you. [peap] *** what went wrong, and how to fix the problem. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Login incorrect: [aa.aa(a)stud.wcc.domain.pl] (from client 10.65.100.41 port 2 cli b4-74-9f-ea-2a-1e) Using Post-Auth-Type Reject # Executing group from file /etc/freeradius-eduroam//sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> aa.aa(a)stud.wcc.domain.pl attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 9 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 9 Sending Access-Reject of id 216 to 10.65.100.41 port 32775 EAP-Message = 0x040c0004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 1.0 seconds. Cleaning up request 0 ID 207 with timestamp +37 Waking up in 1.0 seconds. Cleaning up request 1 ID 208 with timestamp +38 Cleaning up request 2 ID 209 with timestamp +39 Cleaning up request 3 ID 210 with timestamp +39 Cleaning up request 4 ID 211 with timestamp +39 Cleaning up request 5 ID 212 with timestamp +39 Cleaning up request 6 ID 213 with timestamp +39 Waking up in 1.0 seconds. Cleaning up request 7 ID 214 with timestamp +39 Waking up in 0.7 seconds. Cleaning up request 8 ID 215 with timestamp +40 Waking up in 1.0 seconds. Cleaning up request 9 ID 216 with timestamp +41 Ready to process requests. -- Z poważaniem / Yours sincerely Zenon Matuszyk mobile: 00 48 797 004 938 e-mail: zenon.matuszyk(a)networkers.pl www: http://www.networkers.pl

3 3

Rejecting access by IP
by Laura Steynes 27 Jun '16

27 Jun '16

Hello, I am trying to reject without trying access database, any one from an IP range. In this case it is 121.32.x.x Google has shown some have success using a single IP use Calling-Station_Id == 1.2.3.4 But I need to omit a range, however this seems not to work, any ideas or suggestions muchly appreciated. if (Calling-Station-Id =~ /^121.32/ { reject update reply { Reply-Message = "GeoAccess Error" } } Loz

4 5

Linelog - timestamps
by Pshem Kowalczyk 23 Jun '16

23 Jun '16

Hi, We've started using the linelog module to record various events that happen within the radius system. All of our linelog entries start with "%t" to denote the time of the event. During one of the troubleshooting sessions we've discovered that the entries don't necessarily end up in the order we expected them to. Finally we realised that the "%t" is the time the request hits radius and not when the linelog entry is processed. In our case (we proxy all requests) that actually matters, since the home servers can take time to respond. I had a look through the dictionaries and run-time-variables but can't find 'current timestamp', is it actually available? kind regards Pshem

5 6

FR 3.1 NAS-IP-Address
by Scott Armitage 23 Jun '16

23 Jun '16

I noticed an issue using the NAS-IP-Address. This bug (if it is one) did disappear for a while but now seems to be back. Is this a bug or should I retrieve the value in a different way? (26,15) getUserGroupVlan { (26,15) if (!&session-state:Nas-Group) { (26,15) update session-state { (26,15) EXPAND %{sql:SELECT groupid from staffbaseschema.nas where ipaddress = '%{NAS-IP-Address}'::inet} (26,15) Reserved connection (3) (26,15) Executing select query: SELECT groupid from staffbaseschema.nas where ipaddress = ''::inet rlm_sql_postgresql - Status: PGRES_FATAL_ERROR rlm_sql_postgresql - 22P02: INVALID TEXT REPRESENTATION (26,15) ERROR: rlm_sql_postgresql: ERROR: invalid input syntax for type inet: "" (26,15) ERROR: rlm_sql_postgresql: LINE 1: ... groupid from staffbaseschema.nas where ipaddress = ''::inet (26,15) ERROR: rlm_sql_postgresql: ^ (26,15) ERROR: SQL query failed: server error (26,15) Released connection (3) (26,15) Closing connection (4), from 47 unused connections rlm_sql_postgresql - Socket destructor called, closing socket (26,15) --> (26,15) &session-state:Nas-Group := 0 (26,15) } # update session-state (noop) (26,15) } # if (!&session-state:Nas-Group) (noop) (26,15) if ( !&reply:Tunnel-Private-Group-Id && &session-state:Nas-Group > 1) { (26,15) ... (26,15) } (26,15) } # getUserGroupVlan (noop) (26,15) getWiredUserVlan { (26,15) if ("%{client:group}" != "wireless" && !&reply:Tunnel-Private-Group-Id ) { (26,15) EXPAND %{client:group} (26,15) --> wireless (26,15) ... (26,15) } (26,15) if ( &reply:Tunnel-Private-Group-Id == "" ) { (26,15) ... (26,15) } (26,15) } do we now have to specify which tunnel? (13,2) getUserGroupVlan { (13,2) if (!&session-state:Nas-Group) { (13,2) update session-state { (13,2) EXPAND %{sql:SELECT groupid from staffbaseschema.nas where ipaddress = '%{outer.request:NAS-IP-Address}'::inet} (13,2) Reserved connection (1) (13,2) Released connection (1) (13,2) Reserved connection (2) (13,2) Executing select query: SELECT groupid from staffbaseschema.nas where ipaddress = '10.53.253.21'::inet rlm_sql_postgresql - Status: PGRES_TUPLES_OK rlm_sql_postgresql - query affected rows = 0 , fields = 1 (13,2) SQL query returned no results (13,2) Released connection (2) (13,2) --> (13,2) &session-state:Nas-Group := 0 (13,2) } # update session-state (noop) (13,2) } # if (!&session-state:Nas-Group) (noop) (13,2) if ( !&reply:Tunnel-Private-Group-Id && &session-state:Nas-Group > 1) { (13,2) ... (13,2) } (13,2) } # getUserGroupVlan (noop) (13,2) getWiredUserVlan { (13,2) if ("%{client:group}" != "wireless" && !&reply:Tunnel-Private-Group-Id ) { (13,2) EXPAND %{client:group} (13,2) --> wireless Regards Scott

3 5

plain text in answer - class field
by Jacek Wilczyński 23 Jun '16

23 Jun '16

Hello. I use freeradius-3.0.4-6.el7.x86_64 on Centos 7 In config (default) file I have if (Ldap-Group == "some_group") { update reply { Class = "some_group" } } but in answer I get Received Access-Accept Id 146 from 127.0.0.1:1812 to 127.0.0.1:40392 length 40 Class = 0x666f727469676174655f6669726577616c6c Can I get plain text? -- Jacek -----------------------------------------------------

2 1

Correct way to achieve groups of users and confirm access to specific clients
by Bernd 22 Jun '16

22 Jun '16

Hello, I run a FreeRADIUS Ver.:2.1.1. (as it come with SLES11) Configured as User-Source are LDAP (eDir) and the text file (users). There are a lot of clients in the client file. (I assume they are called NAS in RADIUS?!) Now I want to achieve that users are in groups and these groups should access only specific clients. I know that I can setup group(s) in LDAP and restrict RADIUS to search for those users only which are member of this group(s) Q1: But for which words I have to search to group my text file users? Q2: Is it possible to configure more than one LDAP section to achieve that different LDAP groups get access to specific clients? Or what is the correct way? TiA Bernd

2 1

Freeradius v3.0.11 crashes after sql group lookup
by Philippe MARASSE 22 Jun '16

22 Jun '16

Hello, I'm testing FR3.0.11 (on Debian Jessie) as an upgrade to our FR3.0.5 (running on Debian Wheezy). Tests runned fine until I test it with an unknown account : - Auth is EAP/PEAP + MSCHAPv2 - Accounts are stored in sql backend (MySQL) for this SSID. FR crashes with SIGSEGV after : sql_groupcmp finished: User is NOT a member of group wifi-public I've attached freeradius -X output through gdb. Regards. -- Philippe MARASSE Responsable pôle Infrastructures - DSIO Centre Hospitalier Henri Laborit CS 10587 - 370 avenue Jacques Cœur 86021 Poitiers Cedex Tel : 05.49.44.57.19

3 5