- Freeradius-Users - lists.freeradius.org

Error: blank page after logging
by Aghyad Fares 01 Jan '24

01 Jan '24

Hope this email finds you well. I am getting a blank page after I login into RADIUS management application using administrator as a username and radius as a password. P.s. I am using php 5.4 Looking forward to hearing from you soon. Aghyad

2 1

Error : Duplicate module "sql sql"
by Aghyad Fares 25 Dec '23

25 Dec '23

Hope this email finds you well. I am facing this issue after i use this command " /usr/sbin/radiusd -C -lstdout -xxx " I got this error "Duplicate module "sql sql", in file /etc/raddb/mods-enabled/sql.save:20 and file /etc/raddb/mods-enabled/sql:20 " I even checked for duplicates in sql and sql.save files but I didn't find any duplicates. this is sql file in mods-enable : # -*- text -*- ## ## sql.conf -- SQL modules ## ## $Id: 4a59483c35c77f573fb177919e19ba4434cc3da1 $ ###################################################################### # # Configuration for the SQL module # # The database schemas and queries are located in subdirectories: # # sql/<DB>/main/schema.sql Schema # sql/<DB>/main/queries.conf Authorisation and Accounting queries # # Where "DB" is mysql, mssql, oracle, or postgresql. # # sql { # The sub-module to use to execute queries. This should match # the database you're attempting to connect to. # # * rlm_sql_mysql # * rlm_sql_mssql # * rlm_sql_oracle # * rlm_sql_postgresql # * rlm_sql_sqlite # * rlm_sql_null (log queries to disk) driver = "rlm_sql_mysql" # # Several drivers accept specific options, to set them, a # config section with the the name as the driver should be added # to the sql instance. # # Driver specific options are: # # sqlite { # # Path to the sqlite database # filename = "/tmp/freeradius.db" # # # How long to wait for write locks on the database to be # # released (in ms) before giving up. # busy_timeout = 200 # # # If the file above does not exist and bootstrap is set # # a new database file will be created, and the SQL statements # # contained within the bootstrap file will be executed. # bootstrap = "${modconfdir}/${..:name}/main/sqlite/schema.sql" # } # # mysql { # # If any of the files below are set, TLS encryption is enabled # tls { # ca_file = "/etc/ssl/certs/my_ca.crt" # ca_path = "/etc/ssl/certs/" # certificate_file = "/etc/ssl/certs/private/client.crt" # private_key_file = "/etc/ssl/certs/private/client.key" # cipher = "DHE-RSA-AES256-SHA:AES128-SHA" # } # # # If yes, (or auto and libmysqlclient reports warnings are # # available), will retrieve and log additional warnings from # # the server if an error has occured. Defaults to 'auto' # warnings = auto # } # # postgresql { # # # unlike MySQL, which has a tls{} connection configuration, postgresql # # uses its connection parameters - see the radius_db option below in # # this file # # # Send application_name to the postgres server # # Only supported in PG 9.0 and greater. Defaults to no. # send_application_name = yes # } # # The dialect of SQL you want to use, this should usually match # the driver you selected above. # # If you're using rlm_sql_null, then it should be the type of # database the logged queries are going to be executed against. # Connection info: # dialect = "mysql" server = "localhost" port = 3306 login = "radius" password = "radpass" # Database table configuration for everything except Oracle radius_db = "radius" # If you are using Oracle then use this instead # radius_db = "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=your_sid)))" # If you're using postgresql this can also be used instead of the connection info parameters # radius_db = "dbname=radius host=localhost user=radius password=raddpass" # Postgreql doesn't take tls{} options in its module config like mysql does - if you want to # use SSL connections then use this form of connection info parameter # radius_db = "host=localhost port=5432 dbname=radius user=radius password=raddpass sslmode=verify-full sslcert=/etc/ssl/client.crt sslkey=/etc/ssl/client.key sslrootcert=/etc/ssl/ca.crt" # If you want both stop and start records logged to the # same SQL table, leave this as is. If you want them in # different tables, put the start table in acct_table1 # and stop table in acct_table2 acct_table1 = "radacct" acct_table2 = "radacct" # Allow for storing data after authentication postauth_table = "radpostauth" # Tables containing 'check' items authcheck_table = "radcheck" groupcheck_table = "radgroupcheck" # Tables containing 'reply' items authreply_table = "radreply" groupreply_table = "radgroupreply" # Table to keep group info usergroup_table = "radusergroup" # If set to 'yes' (default) we read the group tables unless Fall-Through = no in the reply table. # If set to 'no' we do not read the group tables unless Fall-Through = yes in the reply table. # read_groups = yes # If set to 'yes' (default) we read profiles unless Fall-Through = no in the groupreply table. # If set to 'no' we do not read profiles unless Fall-Through = yes in the groupreply table. # read_profiles = yes # Remove stale session if checkrad does not see a double login delete_stale_sessions = yes # Write SQL queries to a logfile. This is potentially useful for tracing # issues with authorization queries. See also "logfile" directives in # mods-config/sql/main/*/queries.conf. You can enable per-section logging # by enabling "logfile" there, or global logging by enabling "logfile" here. # # Per-section logging can be disabled by setting "logfile = ''" # logfile = ${logdir}/sqllog.sql # Set the maximum query duration and connection timeout # for rlm_sql_mysql. # query_timeout = 5 # As of version 3.0, the "pool" section has replaced the # following configuration items: # # num_sql_socks # connect_failure_retry_delay # lifetime # max_queries # # The connection pool is new for 3.0, and will be used in many # modules, for all kinds of connection-related activity. # # When the server is not threaded, the connection pool # limits are ignored, and only one connection is used. # # If you want to have multiple SQL modules re-use the same # connection pool, use "pool = name" instead of a "pool" # section. e.g. # # sql1 { # ... # pool { # ... # } # } # # # sql2 will use the connection pool from sql1 # sql2 { # ... # pool = sql1 # } # pool { # Connections to create during module instantiation. # If the server cannot create specified number of # connections during instantiation it will exit. # Set to 0 to allow the server to start without the # database being available. start = ${thread[pool].start_servers} # Minimum number of connections to keep open min = ${thread[pool].min_spare_servers} # Maximum number of connections # # If these connections are all in use and a new one # is requested, the request will NOT get a connection. # # Setting 'max' to LESS than the number of threads means # that some threads may starve, and you will see errors # like 'No connections available and at max connection limit' # # Setting 'max' to MORE than the number of threads means # that there are more connections than necessary. max = ${thread[pool].max_servers} # Spare connections to be left idle # # NOTE: Idle connections WILL be closed if "idle_timeout" # is set. This should be less than or equal to "max" above. spare = ${thread[pool].max_spare_servers} # Number of uses before the connection is closed # # 0 means "infinite" uses = 0 # The number of seconds to wait after the server tries # to open a connection, and fails. During this time, # no new connections will be opened. retry_delay = 30 # The lifetime (in seconds) of the connection lifetime = 0 # idle timeout (in seconds). A connection which is # unused for this length of time will be closed. idle_timeout = 60 # NOTE: All configuration settings are enforced. If a # connection is closed because of "idle_timeout", # "uses", or "lifetime", then the total number of # connections MAY fall below "min". When that # happens, it will open a new connection. It will # also log a WARNING message. # # The solution is to either lower the "min" connections, # or increase lifetime/idle_timeout. } # Set to 'yes' to read radius clients from the database ('nas' table) # Clients will ONLY be read on server startup. read_clients = yes # Table to keep radius client info client_table = "nas" # # The group attribute specific to this instance of rlm_sql # # This entry should be used for additional instances (sql foo {}) # of the SQL module. # group_attribute = "${.:instance}-SQL-Group" # This entry should be used for the default instance (sql {}) # of the SQL module. group_attribute = "SQL-Group" # Read database-specific queries $INCLUDE ${modconfdir}/sql/main/mysql/queries.conf } This is sql.save file : # -*- text -*- ## ## sql.conf -- SQL modules ## ## $Id: 4a59483c35c77f573fb177919e19ba4434cc3da1 $ ###################################################################### # # Configuration for the SQL module # # The database schemas and queries are located in subdirectories: # # sql/<DB>/main/schema.sql Schema # sql/<DB>/main/queries.conf Authorisation and Accounting queries # # Where "DB" is mysql, mssql, oracle, or postgresql. # # sql { # The sub-module to use to execute queries. This should match # the database you're attempting to connect to. # # * rlm_sql_mysql # * rlm_sql_mssql # * rlm_sql_oracle # * rlm_sql_postgresql # * rlm_sql_sqlite # * rlm_sql_null (log queries to disk) # driver = "rlm_sql_mysql" dialect = "mysql" # # Several drivers accept specific options, to set them, a # config section with the the name as the driver should be added # to the sql instance. # # Driver specific options are: # # sqlite { # # Path to the sqlite database # filename = "/tmp/freeradius.db" # # # How long to wait for write locks on the database to be # # released (in ms) before giving up. # busy_timeout = 200 # # # If the file above does not exist and bootstrap is set # # a new database file will be created, and the SQL statements # # contained within the bootstrap file will be executed. # bootstrap = "${modconfdir}/${..:name}/main/sqlite/schema.sql" # } # # mysql { # # If any of the files below are set, TLS encryption is enabled # tls { # ca_file = "/etc/ssl/certs/my_ca.crt" # ca_path = "/etc/ssl/certs/" # certificate_file = "/etc/ssl/certs/private/client.crt" # private_key_file = "/etc/ssl/certs/private/client.key" # cipher = "DHE-RSA-AES256-SHA:AES128-SHA" # } # # # If yes, (or auto and libmysqlclient reports warnings are # # available), will retrieve and log additional warnings from # # the server if an error has occured. Defaults to 'auto' # warnings = auto # } # # postgresql { # # # unlike MySQL, which has a tls{} connection configuration, postgresql # # uses its connection parameters - see the radius_db option below in # # this file # # # Send application_name to the postgres server # # Only supported in PG 9.0 and greater. Defaults to no. # send_application_name = yes # } # # The dialect of SQL you want to use, this should usually match # the driver you selected above. # # If you're using rlm_sql_null, then it should be the type of # database the logged queries are going to be executed against. # Connection info: server = "localhost" port = 3306 login = "radius" password = "radpass" # Database table configuration for everything except Oracle radius_db = "radius" # If you are using Oracle then use this instead # radius_db = "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=your_sid)))" # If you're using postgresql this can also be used instead of the connection info parameters # radius_db = "dbname=radius host=localhost user=radius password=raddpass" # Postgreql doesn't take tls{} options in its module config like mysql does - if you want to # use SSL connections then use this form of connection info parameter # radius_db = "host=localhost port=5432 dbname=radius user=radius password=raddpass sslmode=verify-full sslcert=/etc/ssl/client.crt sslkey=/etc/ssl/client.key sslrootcert=/etc/ssl/ca.crt" # If you want both stop and start records logged to the # same SQL table, leave this as is. If you want them in # different tables, put the start table in acct_table1 # and stop table in acct_table2 acct_table1 = "radacct" acct_table2 = "radacct" # Allow for storing data after authentication postauth_table = "radpostauth" # Tables containing 'check' items authcheck_table = "radcheck" groupcheck_table = "radgroupcheck" # Tables containing 'reply' items authreply_table = "radreply" groupreply_table = "radgroupreply" # Table to keep group info usergroup_table = "radusergroup" # If set to 'yes' (default) we read the group tables unless Fall-Through = no in the reply table. # If set to 'no' we do not read the group tables unless Fall-Through = yes in the reply table. # read_groups = yes # If set to 'yes' (default) we read profiles unless Fall-Through = no in the groupreply table. # If set to 'no' we do not read profiles unless Fall-Through = yes in the groupreply table. # read_profiles = yes # Remove stale session if checkrad does not see a double login delete_stale_sessions = yes # Write SQL queries to a logfile. This is potentially useful for tracing # issues with authorization queries. See also "logfile" directives in # mods-config/sql/main/*/queries.conf. You can enable per-section logging # by enabling "logfile" there, or global logging by enabling "logfile" here. # # Per-section logging can be disabled by setting "logfile = ''" # logfile = ${logdir}/sqllog.sql # Set the maximum query duration and connection timeout # for rlm_sql_mysql. # query_timeout = 5 # As of version 3.0, the "pool" section has replaced the # following configuration items: # # num_sql_socks # connect_failure_retry_delay # lifetime # max_queries # # The connection pool is new for 3.0, and will be used in many # modules, for all kinds of connection-related activity. # # When the server is not threaded, the connection pool # limits are ignored, and only one connection is used. # # If you want to have multiple SQL modules re-use the same # connection pool, use "pool = name" instead of a "pool" # section. e.g. # # sql1 { # ... # pool { # ... # } # } # # # sql2 will use the connection pool from sql1 # sql2 { # ... # pool = sql1 # } # pool { # Connections to create during module instantiation. # If the server cannot create specified number of # connections during instantiation it will exit. # Set to 0 to allow the server to start without the # database being available. start = ${thread[pool].start_servers} # Minimum number of connections to keep open min = ${thread[pool].min_spare_servers} # Maximum number of connections # # If these connections are all in use and a new one # is requested, the request will NOT get a connection. # # Setting 'max' to LESS than the number of threads means # that some threads may starve, and you will see errors # like 'No connections available and at max connection limit' # # Setting 'max' to MORE than the number of threads means # that there are more connections than necessary. max = ${thread[pool].max_servers} # Spare connections to be left idle # # NOTE: Idle connections WILL be closed if "idle_timeout" # is set. This should be less than or equal to "max" above. spare = ${thread[pool].max_spare_servers} # Number of uses before the connection is closed # # 0 means "infinite" uses = 0 # The number of seconds to wait after the server tries # to open a connection, and fails. During this time, # no new connections will be opened. retry_delay = 30 # The lifetime (in seconds) of the connection lifetime = 0 # idle timeout (in seconds). A connection which is # unused for this length of time will be closed. idle_timeout = 60 # NOTE: All configuration settings are enforced. If a # connection is closed because of "idle_timeout", # "uses", or "lifetime", then the total number of # connections MAY fall below "min". When that # happens, it will open a new connection. It will # also log a WARNING message. # # The solution is to either lower the "min" connections, # or increase lifetime/idle_timeout. } # Set to 'yes' to read radius clients from the database ('nas' table) # Clients will ONLY be read on server startup. read_clients = yes # Table to keep radius client info client_table = "nas" # # The group attribute specific to this instance of rlm_sql # # This entry should be used for additional instances (sql foo {}) # of the SQL module. # group_attribute = "${.:instance}-SQL-Group" # This entry should be used for the default instance (sql {}) # of the SQL module. group_attribute = "SQL-Group" # Read database-specific queries # $INCLUDE ${modconfdir}/${.:name}/main/${dialect}/queries.conf $INCLUDE ${modconfdir}/sql/main/mysql/queries.conf } Hope you help to find a solution for this error. Looking forward to hearing from you soon. Best wishes; Aghyad

3 3

MAC Address auth?!
by Marco Gaiarin 24 Dec '23

24 Dec '23

A consultant in a session speak about 'MAC address authentication', using Unifi APs/management software, and describing it a '2FA'. If i understood well, enabling a specific options: https://help.ui.com/hc/en-us/articles/115004589707-RADIUS-Based-MAC-Authent… i can connect suppicant to the network (via WPA2/3-Personal, so a shared secret) and then do a second-step authorization using radius, but where account are in the form 'AABBCCDDEEFF' (uppercase MAC address) and password is identical to the user. This seems '0,5FA': 0,5 for a shared passwod, 0 for account where password is identical to username. But effectivaly i found in google some setups like that, that really i don't understand. Someone have some clue? This seems to me real 2FA... https://wiki.freeradius.org/guide/2FA-Active-Directory-plus-Proxy Thanks. -- Vendere no, non passa tra i miei rischi, non comprate i miei dischi e sputatemi addosso. (F. Guccini)

3 2

Monitoring freeradius
by dextá 23 Dec '23

23 Dec '23

Hello, What are the critical points to monitor in freeradius? I'm thinking of monitoring our server via zabbix. Thanks in advance!

2 1

Class atrribute is not updating with CoA
by Imdad Hasan 21 Dec '23

21 Dec '23

Hi All, Can anyone please guide me why the Class attribute is not updating with CoA, even the CoA response is showing ACK (Success). So How can I update the Class attribute with CoA.? Thanks Imdad

2 1

ERROR: FAILED: No NT-Password. Cannot perform authentication
by Chevy Innis 20 Dec '23

20 Dec '23

Hi everyone, I have Aruba APs, FreeRADIUS, and 389 directory server for LDAP. From what I can gather from the debug output and my own research, I can see that the client (Aruba AP) is trying to use EAP-MSCHAPv2 for authentication, which is not compatible with the SSHA2-512 stored passwords in our LDAP server. The solution I have seen for this is to either change the password storage format, or change the authentication method, preferably the later. Aruba APs are compatible with a number of eap authentication methods that should work with SSHA2-512 passwords, but there is no way to define this on the controller, so I think this has to be done on the radius server. Let me know if I am on the right track. If this assumption is correct, how do I manually define the authentication method on freeradius? Or if I am totally wrong and misguided, a point in the right direction will be greatly appreciated. See debug output below. Thank you. root@paw-mgmt-svr04:/home/pawnetadmin# freeradius -X 2>&1 | tee debugfile FreeRADIUS Version 3.0.26 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client 202.8.32.153 { ipaddr = 202.8.32.153 require_message_authenticator = no secret = <<< secret >>> shortname = "paw-mgmt-ap01" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/3.0/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "ldap://ldap-pool.pawsey.org.au" identity = "uid=cinnis,ou=people,dc=pawsey,dc=org,dc=au" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=pawsey,dc=org,dc=au" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } instantiate { } # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/coa # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20516 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap-pool.pawsey.org.au:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap-pool.pawsey.org.au:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap-pool.pawsey.org.au:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap-pool.pawsey.org.au:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap-pool.pawsey.org.au:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:336 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 57048 Listening on proxy address :: port 47947 Ready to process requests (0) Received Access-Request Id 31 from 202.8.32.153:64998 to 146.118.55.22:1812 length 252 (0) User-Name = "cinnis" (0) NAS-IP-Address = 202.8.32.153 (0) NAS-Port = 0 (0) NAS-Identifier = "202.8.32.153" (0) NAS-Port-Type = Wireless-802.11 (0) Calling-Station-Id = "aef623dbdd7d" (0) Called-Station-Id = "b837b2cc82c7" (0) Service-Type = Framed-User (0) Framed-MTU = 1100 (0) EAP-Message = 0x0222000b0163696e6e6973 (0) Aruba-Essid-Name = "pawsey-aruba01" (0) Aruba-Location-Id = "paw-mgmt-ap01" (0) Aruba-AP-Group = "Pawsey" (0) Aruba-AP-MAC-Address = "b837b2cc82c7" (0) Aruba-Device-MAC-Address = "aef623dbdd7d" (0) WLAN-Pairwise-Cipher = 1027081 (0) WLAN-Group-Cipher = 1027081 (0) WLAN-Group-Mgmt-Cipher = 1027084 (0) WLAN-AKM-Suite = 1027084 (0) Message-Authenticator = 0xbf5cfcc1d9a4b65fc38841eba1bc5a53 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "cinnis", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 34 length 11 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 35 length 22 (0) eap: EAP session adding &reply:State = 0xacbf8e2dac9c8a23 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 31 from 146.118.55.22:1812 to 202.8.32.153:64998 length 80 (0) EAP-Message = 0x012300160410f81be1c0c58574328670a9084ba7ce33 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xacbf8e2dac9c8a23447f5f0d988fc5a6 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 32 from 202.8.32.153:64998 to 146.118.55.22:1812 length 267 (1) User-Name = "cinnis" (1) NAS-IP-Address = 202.8.32.153 (1) NAS-Port = 0 (1) NAS-Identifier = "202.8.32.153" (1) NAS-Port-Type = Wireless-802.11 (1) Calling-Station-Id = "aef623dbdd7d" (1) Called-Station-Id = "b837b2cc82c7" (1) Service-Type = Framed-User (1) Framed-MTU = 1100 (1) EAP-Message = 0x022300080319152b (1) State = 0xacbf8e2dac9c8a23447f5f0d988fc5a6 (1) Aruba-Essid-Name = "pawsey-aruba01" (1) Aruba-Location-Id = "paw-mgmt-ap01" (1) Aruba-AP-Group = "Pawsey" (1) Aruba-AP-MAC-Address = "b837b2cc82c7" (1) Aruba-Device-MAC-Address = "aef623dbdd7d" (1) WLAN-Pairwise-Cipher = 1027081 (1) WLAN-Group-Cipher = 1027081 (1) WLAN-Group-Mgmt-Cipher = 1027084 (1) WLAN-AKM-Suite = 1027084 (1) Message-Authenticator = 0x0da18016c6e85b1432a7eed37e2c02d1 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "cinnis", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 35 length 8 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop rlm_ldap (ldap): Reserved connection (0) (1) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (1) ldap: --> (uid=cinnis) (1) ldap: Performing search in "ou=people,dc=pawsey,dc=org,dc=au" with filter "(uid=cinnis)", scope "sub" (1) ldap: Waiting for search result... (1) ldap: User object found at DN "uid=cinnis,ou=people,dc=pawsey,dc=org,dc=au" (1) ldap: Processing user attributes (1) ldap: control:Password-With-Header += '{SSHA512}nx/7G2SlyNnOn/GAt9PupHv9tXr+3k1sw0RCEXLOUz0CMR330v4xLfdRfYtkvzfxAQtorEB2igMDtm1Dah7APpeiezp8X9Yh' rlm_ldap (ldap): Released connection (0) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap-pool.pawsey.org.au:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) [ldap] = updated (1) [expiration] = noop (1) [logintime] = noop (1) pap: Converted: &control:Password-With-Header -> &control:SSHA2-512-Password (1) pap: Removing &control:Password-With-Header (1) pap: Normalizing SSHA2-512-Password from base64 encoding, 96 bytes -> 72 bytes (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xacbf8e2dac9c8a23 (1) eap: Finished EAP session with state 0xacbf8e2dac9c8a23 (1) eap: Previous EAP request found for state 0xacbf8e2dac9c8a23, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: (TLS) Initiating new session (1) eap: Sending EAP Request (code 1) ID 36 length 6 (1) eap: EAP session adding &reply:State = 0xacbf8e2dad9b9723 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) session-state: Saving cached attributes (1) Framed-MTU = 994 (1) Sent Access-Challenge Id 32 from 146.118.55.22:1812 to 202.8.32.153:64998 length 64 (1) EAP-Message = 0x012400061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xacbf8e2dad9b9723447f5f0d988fc5a6 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 33 from 202.8.32.153:64998 to 146.118.55.22:1812 length 420 (2) User-Name = "cinnis" (2) NAS-IP-Address = 202.8.32.153 (2) NAS-Port = 0 (2) NAS-Identifier = "202.8.32.153" (2) NAS-Port-Type = Wireless-802.11 (2) Calling-Station-Id = "aef623dbdd7d" (2) Called-Station-Id = "b837b2cc82c7" (2) Service-Type = Framed-User (2) Framed-MTU = 1100 (2) EAP-Message = 0x022400a119800000009716030100920100008e0303658257969eabec888737990ce4b7e8897a8c17fd201a49aae1935abe072a3fce00002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000 (2) State = 0xacbf8e2dad9b9723447f5f0d988fc5a6 (2) Aruba-Essid-Name = "pawsey-aruba01" (2) Aruba-Location-Id = "paw-mgmt-ap01" (2) Aruba-AP-Group = "Pawsey" (2) Aruba-AP-MAC-Address = "b837b2cc82c7" (2) Aruba-Device-MAC-Address = "aef623dbdd7d" (2) WLAN-Pairwise-Cipher = 1027081 (2) WLAN-Group-Cipher = 1027081 (2) WLAN-Group-Mgmt-Cipher = 1027084 (2) WLAN-AKM-Suite = 1027084 (2) Message-Authenticator = 0x41ac94e039eeeb27aa7995d3ec2d12d8 (2) Restoring &session-state (2) &session-state:Framed-MTU = 994 (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "cinnis", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 36 length 161 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xacbf8e2dad9b9723 (2) eap: Finished EAP session with state 0xacbf8e2dad9b9723 (2) eap: Previous EAP request found for state 0xacbf8e2dad9b9723, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: (TLS) EAP Peer says that the final record size will be 151 bytes (2) eap_peap: (TLS) EAP Got all data (151 bytes) (2) eap_peap: (TLS) Handshake state - before SSL initialization (2) eap_peap: (TLS) Handshake state - Server before SSL initialization (2) eap_peap: (TLS) Handshake state - Server before SSL initialization (2) eap_peap: (TLS) recv TLS 1.3 Handshake, ClientHello (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client hello (2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHello (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server hello (2) eap_peap: (TLS) send TLS 1.2 Handshake, Certificate (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write certificate (2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerKeyExchange (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write key exchange (2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHelloDone (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done (2) eap_peap: (TLS) Server : Need to read more data: SSLv3/TLS write server done (2) eap_peap: (TLS) In Handshake Phase (2) eap: Sending EAP Request (code 1) ID 37 length 1004 (2) eap: EAP session adding &reply:State = 0xacbf8e2dae9a9723 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) session-state: Saving cached attributes (2) Framed-MTU = 994 (2) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (2) Sent Access-Challenge Id 33 from 146.118.55.22:1812 to 202.8.32.153:64998 length 1068 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xacbf8e2dae9a9723447f5f0d988fc5a6 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 34 from 202.8.32.153:64998 to 146.118.55.22:1812 length 265 (3) User-Name = "cinnis" (3) NAS-IP-Address = 202.8.32.153 (3) NAS-Port = 0 (3) NAS-Identifier = "202.8.32.153" (3) NAS-Port-Type = Wireless-802.11 (3) Calling-Station-Id = "aef623dbdd7d" (3) Called-Station-Id = "b837b2cc82c7" (3) Service-Type = Framed-User (3) Framed-MTU = 1100 (3) EAP-Message = 0x022500061900 (3) State = 0xacbf8e2dae9a9723447f5f0d988fc5a6 (3) Aruba-Essid-Name = "pawsey-aruba01" (3) Aruba-Location-Id = "paw-mgmt-ap01" (3) Aruba-AP-Group = "Pawsey" (3) Aruba-AP-MAC-Address = "b837b2cc82c7" (3) Aruba-Device-MAC-Address = "aef623dbdd7d" (3) WLAN-Pairwise-Cipher = 1027081 (3) WLAN-Group-Cipher = 1027081 (3) WLAN-Group-Mgmt-Cipher = 1027084 (3) WLAN-AKM-Suite = 1027084 (3) Message-Authenticator = 0xc6ed1a5762cf7aa597926146d310beaa (3) Restoring &session-state (3) &session-state:Framed-MTU = 994 (3) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "cinnis", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 37 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xacbf8e2dae9a9723 (3) eap: Finished EAP session with state 0xacbf8e2dae9a9723 (3) eap: Previous EAP request found for state 0xacbf8e2dae9a9723, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: (TLS) Peer ACKed our handshake fragment (3) eap: Sending EAP Request (code 1) ID 38 length 219 (3) eap: EAP session adding &reply:State = 0xacbf8e2daf999723 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) session-state: Saving cached attributes (3) Framed-MTU = 994 (3) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (3) Sent Access-Challenge Id 34 from 146.118.55.22:1812 to 202.8.32.153:64998 length 277 (3) EAP-Message = 0x012600db190081d6599b85f5ae458d1c1f2693a2ff6de32f92243c82cc5c43b74d23858dc3fe15c43180ac6ee82628e764ad376431085cfa8f595b43cecf51564fc58557f645bdae4a8cb6192359b285198020f06468cbe6122710a3b48d9455e017419c446e28ec60b7b0466955b98451d167f9f5537b850cca3622fb2445871cbfb30d82ee4636db92de8bb91d760baa4a98ab59daaf99d2c522369c16e614a5ec758afccca22f2919aa7b67c45b4b4d8874f94e41c28d1c8d63450c6cad5ea4c0ba25fe88c5bdd9c982022fa6e4b93f5716030300040e000000 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xacbf8e2daf999723447f5f0d988fc5a6 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 35 from 202.8.32.153:64998 to 146.118.55.22:1812 length 395 (4) User-Name = "cinnis" (4) NAS-IP-Address = 202.8.32.153 (4) NAS-Port = 0 (4) NAS-Identifier = "202.8.32.153" (4) NAS-Port-Type = Wireless-802.11 (4) Calling-Station-Id = "aef623dbdd7d" (4) Called-Station-Id = "b837b2cc82c7" (4) Service-Type = Framed-User (4) Framed-MTU = 1100 (4) EAP-Message = 0x0226008819800000007e1603030046100000424104b46f177c54099766e9ea709a123c22b0facecbe7f746ed35b53b95929abc8a1b391d0db8e79eb497e8167c5404c66924ebf488aefa9783a5bc931098976db1c9140303000101160303002885ad6f7b5100450f2a1365da8f33c95e6e36a745c9b79350efe834acdc8bbee182a58efdbe506f96 (4) State = 0xacbf8e2daf999723447f5f0d988fc5a6 (4) Aruba-Essid-Name = "pawsey-aruba01" (4) Aruba-Location-Id = "paw-mgmt-ap01" (4) Aruba-AP-Group = "Pawsey" (4) Aruba-AP-MAC-Address = "b837b2cc82c7" (4) Aruba-Device-MAC-Address = "aef623dbdd7d" (4) WLAN-Pairwise-Cipher = 1027081 (4) WLAN-Group-Cipher = 1027081 (4) WLAN-Group-Mgmt-Cipher = 1027084 (4) WLAN-AKM-Suite = 1027084 (4) Message-Authenticator = 0xb7aa9e69a1ac50f578088035570a5c8f (4) Restoring &session-state (4) &session-state:Framed-MTU = 994 (4) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "cinnis", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 38 length 136 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xacbf8e2daf999723 (4) eap: Finished EAP session with state 0xacbf8e2daf999723 (4) eap: Previous EAP request found for state 0xacbf8e2daf999723, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: (TLS) EAP Peer says that the final record size will be 126 bytes (4) eap_peap: (TLS) EAP Got all data (126 bytes) (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done (4) eap_peap: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client key exchange (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read change cipher spec (4) eap_peap: (TLS) recv TLS 1.2 Handshake, Finished (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read finished (4) eap_peap: (TLS) send TLS 1.2 ChangeCipherSpec (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec (4) eap_peap: (TLS) send TLS 1.2 Handshake, Finished (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write finished (4) eap_peap: (TLS) Handshake state - SSL negotiation finished successfully (4) eap_peap: (TLS) Connection Established (4) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (4) eap_peap: TLS-Session-Version = "TLS 1.2" (4) eap: Sending EAP Request (code 1) ID 39 length 57 (4) eap: EAP session adding &reply:State = 0xacbf8e2da8989723 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) session-state: Saving cached attributes (4) Framed-MTU = 994 (4) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (4) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (4) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (4) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (4) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (4) TLS-Session-Version = "TLS 1.2" (4) Sent Access-Challenge Id 35 from 146.118.55.22:1812 to 202.8.32.153:64998 length 115 (4) EAP-Message = 0x0127003919001403030001011603030028adadc0d8bac571660801b6061e715d09965c990efff3734d505445672aa0dd6e413c9a872c786179 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xacbf8e2da8989723447f5f0d988fc5a6 (4) Finished request Waking up in 4.8 seconds. (5) Received Access-Request Id 36 from 202.8.32.153:64998 to 146.118.55.22:1812 length 265 (5) User-Name = "cinnis" (5) NAS-IP-Address = 202.8.32.153 (5) NAS-Port = 0 (5) NAS-Identifier = "202.8.32.153" (5) NAS-Port-Type = Wireless-802.11 (5) Calling-Station-Id = "aef623dbdd7d" (5) Called-Station-Id = "b837b2cc82c7" (5) Service-Type = Framed-User (5) Framed-MTU = 1100 (5) EAP-Message = 0x022700061900 (5) State = 0xacbf8e2da8989723447f5f0d988fc5a6 (5) Aruba-Essid-Name = "pawsey-aruba01" (5) Aruba-Location-Id = "paw-mgmt-ap01" (5) Aruba-AP-Group = "Pawsey" (5) Aruba-AP-MAC-Address = "b837b2cc82c7" (5) Aruba-Device-MAC-Address = "aef623dbdd7d" (5) WLAN-Pairwise-Cipher = 1027081 (5) WLAN-Group-Cipher = 1027081 (5) WLAN-Group-Mgmt-Cipher = 1027084 (5) WLAN-AKM-Suite = 1027084 (5) Message-Authenticator = 0x793a0acd9005fabc0fb41c74cbe98639 (5) Restoring &session-state (5) &session-state:Framed-MTU = 994 (5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (5) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) &session-state:TLS-Session-Version = "TLS 1.2" (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "cinnis", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 39 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xacbf8e2da8989723 (5) eap: Finished EAP session with state 0xacbf8e2da8989723 (5) eap: Previous EAP request found for state 0xacbf8e2da8989723, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: (TLS) Peer ACKed our handshake fragment. handshake is finished (5) eap_peap: Session established. Decoding tunneled attributes (5) eap_peap: PEAP state TUNNEL ESTABLISHED (5) eap: Sending EAP Request (code 1) ID 40 length 40 (5) eap: EAP session adding &reply:State = 0xacbf8e2da9979723 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) session-state: Saving cached attributes (5) Framed-MTU = 994 (5) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (5) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (5) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (5) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (5) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) TLS-Session-Version = "TLS 1.2" (5) Sent Access-Challenge Id 36 from 146.118.55.22:1812 to 202.8.32.153:64998 length 98 (5) EAP-Message = 0x012800281900170303001dadadc0d8bac571673d34fcf19da62cc342aa46fd9f4c1e25eee85abab0 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xacbf8e2da9979723447f5f0d988fc5a6 (5) Finished request Waking up in 4.8 seconds. (6) Received Access-Request Id 37 from 202.8.32.153:64998 to 146.118.55.22:1812 length 301 (6) User-Name = "cinnis" (6) NAS-IP-Address = 202.8.32.153 (6) NAS-Port = 0 (6) NAS-Identifier = "202.8.32.153" (6) NAS-Port-Type = Wireless-802.11 (6) Calling-Station-Id = "aef623dbdd7d" (6) Called-Station-Id = "b837b2cc82c7" (6) Service-Type = Framed-User (6) Framed-MTU = 1100 (6) EAP-Message = 0x0228002a1900170303001f85ad6f7b51004510436531d625b8985bee0d04b04fe10b9fe3c2b6be08d03e (6) State = 0xacbf8e2da9979723447f5f0d988fc5a6 (6) Aruba-Essid-Name = "pawsey-aruba01" (6) Aruba-Location-Id = "paw-mgmt-ap01" (6) Aruba-AP-Group = "Pawsey" (6) Aruba-AP-MAC-Address = "b837b2cc82c7" (6) Aruba-Device-MAC-Address = "aef623dbdd7d" (6) WLAN-Pairwise-Cipher = 1027081 (6) WLAN-Group-Cipher = 1027081 (6) WLAN-Group-Mgmt-Cipher = 1027084 (6) WLAN-AKM-Suite = 1027084 (6) Message-Authenticator = 0xc838f6a2988a899a1ab7f2f936acba3a (6) Restoring &session-state (6) &session-state:Framed-MTU = 994 (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (6) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) &session-state:TLS-Session-Version = "TLS 1.2" (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "cinnis", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 40 length 42 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xacbf8e2da9979723 (6) eap: Finished EAP session with state 0xacbf8e2da9979723 (6) eap: Previous EAP request found for state 0xacbf8e2da9979723, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: (TLS) EAP Done initial handshake (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state WAITING FOR INNER IDENTITY (6) eap_peap: Identity - cinnis (6) eap_peap: Got inner identity 'cinnis' (6) eap_peap: Setting default EAP type for tunneled EAP session (6) eap_peap: Got tunneled request (6) eap_peap: EAP-Message = 0x0228000b0163696e6e6973 (6) eap_peap: Setting User-Name to cinnis (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap: EAP-Message = 0x0228000b0163696e6e6973 (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap: User-Name = "cinnis" (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x0228000b0163696e6e6973 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "cinnis" (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [chap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "cinnis", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 40 length 11 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: Issuing Challenge (6) eap: Sending EAP Request (code 1) ID 41 length 43 (6) eap: EAP session adding &reply:State = 0x2e43fcfd2e6ae697 (6) [eap] = handled (6) } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x0129002b1a01290026107782beaf28a29753aaaa8735c1e80502667265657261646975732d332e302e3236 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x2e43fcfd2e6ae69791d2eb31eacfa999 (6) eap_peap: Got tunneled reply code 11 (6) eap_peap: EAP-Message = 0x0129002b1a01290026107782beaf28a29753aaaa8735c1e80502667265657261646975732d332e302e3236 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x2e43fcfd2e6ae69791d2eb31eacfa999 (6) eap_peap: Got tunneled reply RADIUS code 11 (6) eap_peap: EAP-Message = 0x0129002b1a01290026107782beaf28a29753aaaa8735c1e80502667265657261646975732d332e302e3236 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x2e43fcfd2e6ae69791d2eb31eacfa999 (6) eap_peap: Got tunneled Access-Challenge (6) eap: Sending EAP Request (code 1) ID 41 length 74 (6) eap: EAP session adding &reply:State = 0xacbf8e2daa969723 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) session-state: Saving cached attributes (6) Framed-MTU = 994 (6) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (6) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (6) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (6) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) TLS-Session-Version = "TLS 1.2" (6) Sent Access-Challenge Id 37 from 146.118.55.22:1812 to 202.8.32.153:64998 length 132 (6) EAP-Message = 0x0129004a1900170303003fadadc0d8bac57168169ea553441fae056b4b81c61ccc1aa325adda636fd76131712a09458793559d9c3d405107ea0d82762f62151e81f80eef5e805661fd55 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xacbf8e2daa969723447f5f0d988fc5a6 (6) Finished request Waking up in 4.8 seconds. (7) Received Access-Request Id 38 from 202.8.32.153:64998 to 146.118.55.22:1812 length 355 (7) User-Name = "cinnis" (7) NAS-IP-Address = 202.8.32.153 (7) NAS-Port = 0 (7) NAS-Identifier = "202.8.32.153" (7) NAS-Port-Type = Wireless-802.11 (7) Calling-Station-Id = "aef623dbdd7d" (7) Called-Station-Id = "b837b2cc82c7" (7) Service-Type = Framed-User (7) Framed-MTU = 1100 (7) EAP-Message = 0x022900601900170303005585ad6f7b51004511bf7522d9301d7bcefdd3a583e613c0851a7768a77374a35c81ecf65b0889485da2fa99e7e02acc39871d28cf6defca36ff9e54a0071e536fb4f4f5bac20ad967b81d2cea5e490076ebb7ca7d1d (7) State = 0xacbf8e2daa969723447f5f0d988fc5a6 (7) Aruba-Essid-Name = "pawsey-aruba01" (7) Aruba-Location-Id = "paw-mgmt-ap01" (7) Aruba-AP-Group = "Pawsey" (7) Aruba-AP-MAC-Address = "b837b2cc82c7" (7) Aruba-Device-MAC-Address = "aef623dbdd7d" (7) WLAN-Pairwise-Cipher = 1027081 (7) WLAN-Group-Cipher = 1027081 (7) WLAN-Group-Mgmt-Cipher = 1027084 (7) WLAN-AKM-Suite = 1027084 (7) Message-Authenticator = 0x2662a952fe880851d5c8b6c082d48c8c (7) Restoring &session-state (7) &session-state:Framed-MTU = 994 (7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (7) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) &session-state:TLS-Session-Version = "TLS 1.2" (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "cinnis", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 41 length 96 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x2e43fcfd2e6ae697 (7) eap: Finished EAP session with state 0xacbf8e2daa969723 (7) eap: Previous EAP request found for state 0xacbf8e2daa969723, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: (TLS) EAP Done initial handshake (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state phase2 (7) eap_peap: EAP method MSCHAPv2 (26) (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x022900411a0229003c31a72220197244c30038b38ac77f0844570000000000000000d68f2ca22b77c9ba02a72ed883ffbd1aac3115947968f01d0063696e6e6973 (7) eap_peap: Setting User-Name to cinnis (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x022900411a0229003c31a72220197244c30038b38ac77f0844570000000000000000d68f2ca22b77c9ba02a72ed883ffbd1aac3115947968f01d0063696e6e6973 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "cinnis" (7) eap_peap: State = 0x2e43fcfd2e6ae69791d2eb31eacfa999 (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x022900411a0229003c31a72220197244c30038b38ac77f0844570000000000000000d68f2ca22b77c9ba02a72ed883ffbd1aac3115947968f01d0063696e6e6973 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "cinnis" (7) State = 0x2e43fcfd2e6ae69791d2eb31eacfa999 (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "cinnis", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 41 length 65 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) [files] = noop rlm_ldap (ldap): Reserved connection (1) (7) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (7) ldap: --> (uid=cinnis) (7) ldap: Performing search in "ou=people,dc=pawsey,dc=org,dc=au" with filter "(uid=cinnis)", scope "sub" (7) ldap: Waiting for search result... (7) ldap: User object found at DN "uid=cinnis,ou=people,dc=pawsey,dc=org,dc=au" (7) ldap: Processing user attributes (7) ldap: control:Password-With-Header += '{SSHA512}nx/7G2SlyNnOn/GAt9PupHv9tXr+3k1sw0RCEXLOUz0CMR330v4xLfdRfYtkvzfxAQtorEB2igMDtm1Dah7APpeiezp8X9Yh' rlm_ldap (ldap): Released connection (1) (7) [ldap] = updated (7) [expiration] = noop (7) [logintime] = noop (7) pap: Converted: &control:Password-With-Header -> &control:SSHA2-512-Password (7) pap: Removing &control:Password-With-Header (7) pap: Normalizing SSHA2-512-Password from base64 encoding, 96 bytes -> 72 bytes (7) pap: WARNING: Auth-Type already set. Not setting to PAP (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0x2e43fcfd2e6ae697 (7) eap: Finished EAP session with state 0x2e43fcfd2e6ae697 (7) eap: Previous EAP request found for state 0x2e43fcfd2e6ae697, released from the list (7) eap: Peer sent packet with method EAP MSCHAPv2 (26) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) eap_mschapv2: authenticate { (7) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (7) mschap: Creating challenge hash with username: cinnis (7) mschap: Client is using MS-CHAPv2 (7) mschap: ERROR: FAILED: No NT-Password. Cannot perform authentication (7) mschap: ERROR: MS-CHAP2-Response is incorrect (7) eap_mschapv2: [mschap] = reject (7) eap_mschapv2: } # authenticate = reject (7) eap: Sending EAP Failure (code 4) ID 41 length 4 (7) eap: Freeing handler (7) [eap] = reject (7) } # authenticate = reject (7) Failed to authenticate the user (7) Using Post-Auth-Type Reject (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) Post-Auth-Type REJECT { (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject: --> cinnis (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) update outer.session-state { (7) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: FAILED: No NT-Password. Cannot perform authentication' (7) } # update outer.session-state = noop (7) } # Post-Auth-Type REJECT = updated (7) } # server inner-tunnel (7) Virtual server sending reply (7) MS-CHAP-Error = ")E=691 R=1 C=b6fadc319ac0a2784f689ea7332565c9 V=3 M=Authentication rejected" (7) EAP-Message = 0x04290004 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Got tunneled reply code 3 (7) eap_peap: MS-CHAP-Error = ")E=691 R=1 C=b6fadc319ac0a2784f689ea7332565c9 V=3 M=Authentication rejected" (7) eap_peap: EAP-Message = 0x04290004 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Got tunneled reply RADIUS code 3 (7) eap_peap: MS-CHAP-Error = ")E=691 R=1 C=b6fadc319ac0a2784f689ea7332565c9 V=3 M=Authentication rejected" (7) eap_peap: EAP-Message = 0x04290004 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Tunneled authentication was rejected (7) eap_peap: FAILURE (7) eap: Sending EAP Request (code 1) ID 42 length 46 (7) eap: EAP session adding &reply:State = 0xacbf8e2dab959723 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) session-state: Saving cached attributes (7) Framed-MTU = 994 (7) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (7) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (7) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (7) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) TLS-Session-Version = "TLS 1.2" (7) Module-Failure-Message := "mschap: FAILED: No NT-Password. Cannot perform authentication" (7) Sent Access-Challenge Id 38 from 146.118.55.22:1812 to 202.8.32.153:64998 length 104 (7) EAP-Message = 0x012a002e19001703030023adadc0d8bac571691422853e29e1488bede09f06ee11589b59c4f69816e1b3493109bf (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xacbf8e2dab959723447f5f0d988fc5a6 (7) Finished request Waking up in 4.8 seconds. (8) Received Access-Request Id 39 from 202.8.32.153:64998 to 146.118.55.22:1812 length 305 (8) User-Name = "cinnis" (8) NAS-IP-Address = 202.8.32.153 (8) NAS-Port = 0 (8) NAS-Identifier = "202.8.32.153" (8) NAS-Port-Type = Wireless-802.11 (8) Calling-Station-Id = "aef623dbdd7d" (8) Called-Station-Id = "b837b2cc82c7" (8) Service-Type = Framed-User (8) Framed-MTU = 1100 (8) EAP-Message = 0x022a002e1900170303002385ad6f7b510045124a6c7543d95cf4c13d2688d43fee9bfbc37b92550f05040ebad2e0 (8) State = 0xacbf8e2dab959723447f5f0d988fc5a6 (8) Aruba-Essid-Name = "pawsey-aruba01" (8) Aruba-Location-Id = "paw-mgmt-ap01" (8) Aruba-AP-Group = "Pawsey" (8) Aruba-AP-MAC-Address = "b837b2cc82c7" (8) Aruba-Device-MAC-Address = "aef623dbdd7d" (8) WLAN-Pairwise-Cipher = 1027081 (8) WLAN-Group-Cipher = 1027081 (8) WLAN-Group-Mgmt-Cipher = 1027084 (8) WLAN-AKM-Suite = 1027084 (8) Message-Authenticator = 0x0b7fd77c594812484ce9443a8580abea (8) Restoring &session-state (8) &session-state:Framed-MTU = 994 (8) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (8) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (8) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (8) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8) &session-state:TLS-Session-Version = "TLS 1.2" (8) &session-state:Module-Failure-Message := "mschap: FAILED: No NT-Password. Cannot perform authentication" (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "cinnis", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 42 length 46 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0xacbf8e2dab959723 (8) eap: Finished EAP session with state 0xacbf8e2dab959723 (8) eap: Previous EAP request found for state 0xacbf8e2dab959723, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: (TLS) EAP Done initial handshake (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state send tlv failure (8) eap_peap: Received EAP-TLV response (8) eap_peap: ERROR: The users session was previously rejected: returning reject (again.) (8) eap_peap: This means you need to read the PREVIOUS messages in the debug output (8) eap_peap: to find out the reason why the user was rejected (8) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (8) eap_peap: what went wrong, and how to fix the problem (8) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (8) eap: Sending EAP Failure (code 4) ID 42 length 4 (8) eap: Failed in EAP select (8) [eap] = invalid (8) } # authenticate = invalid (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) Post-Auth-Type REJECT { (8) attr_filter.access_reject: EXPAND %{User-Name} (8) attr_filter.access_reject: --> cinnis (8) attr_filter.access_reject: Matched entry DEFAULT at line 11 (8) [attr_filter.access_reject] = updated (8) [eap] = noop (8) policy remove_reply_message_if_eap { (8) if (&reply:EAP-Message && &reply:Reply-Message) { (8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (8) else { (8) [noop] = noop (8) } # else = noop (8) } # policy remove_reply_message_if_eap = noop (8) } # Post-Auth-Type REJECT = updated (8) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (8) Sending delayed response (8) Sent Access-Reject Id 39 from 146.118.55.22:1812 to 202.8.32.153:64998 length 44 (8) EAP-Message = 0x042a0004 (8) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.8 seconds. (0) Cleaning up request packet ID 31 with timestamp +30 due to cleanup_delay was reached (1) Cleaning up request packet ID 32 with timestamp +30 due to cleanup_delay was reached (2) Cleaning up request packet ID 33 with timestamp +30 due to cleanup_delay was reached (3) Cleaning up request packet ID 34 with timestamp +30 due to cleanup_delay was reached (4) Cleaning up request packet ID 35 with timestamp +30 due to cleanup_delay was reached (5) Cleaning up request packet ID 36 with timestamp +30 due to cleanup_delay was reached (6) Cleaning up request packet ID 37 with timestamp +30 due to cleanup_delay was reached (7) Cleaning up request packet ID 38 with timestamp +30 due to cleanup_delay was reached (8) Cleaning up request packet ID 39 with timestamp +30 due to cleanup_delay was reached Ready to process requests

2 3

I encountered the problem that there is an account in the database, but the authentication process feedback does not exist. Please help.
by 娶你苟命 19 Dec '23

19 Dec '23

Hi,everyone！ * I'm having trouble with freeradius and don't know if I should ask "freeradius-users(a)lists.freeradius.org <freeradius-users(a)lists.freeradius.org>"? If this has caused any inconvenience to anyone, please accept my apology and please ignore this email.* * The following is the debugging process tee debugfile I provide for freeradius sever to execute radiusd -X 2>&1 | (this includes valid authentication and invalid authentication processes, I will put them at the end of the email):* FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/sql including configuration file /etc/raddb/mods-config/sql/main/mysql/queries.conf including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client all_client { ipaddr = 0.0.0.0/0 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_sql # Loading module "sql" from file /etc/raddb/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 3306 login = "dbuser" password = <<< secret >>> radius_db = "radiusdb" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY i d" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY i d" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedproto col FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '% {NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '% {NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, c onnectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatec ause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME( %{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', ' ', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Tim estamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsess iontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctet s = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time} :-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Giga words}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE Ac ctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT" . # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql rlm_sql_mysql: libmysql version: 10.1.48-MariaDB mysql { tls { } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radiusdb" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX socket, server version 11.2.2-MariaDB-log, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX socket, server version 11.2.2-MariaDB-log, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX socket, server version 11.2.2-MariaDB-log, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX socket, server version 11.2.2-MariaDB-log, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX socket, server version 11.2.2-MariaDB-log, protocol version 10 } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:330 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 34346 Listening on proxy address :: port 45544 Ready to process requests *The following will be the debugging information of the certification process of the switch：* (0) Received Access-Request Id 228 from 192.168.1.243:38272 to 192.168.2.118:1812 length 215 (0) User-Name = "netnoc" (0) NAS-Identifier = "4F-37U-S6812" (0) Acct-Session-Id = "0000000106121519040000000108000026168" (0) User-Password = "123456" (0) Calling-Station-Id = "192.168.2.1" (0) NAS-Port-Type = Virtual (0) Attr-26.25506.230 = 0x4d2d4769676162697445746865726e6574302f302f30 (0) Framed-IP-Address = 192.168.2.1 (0) Service-Type = Login-User (0) NAS-IP-Address = 192.168.1.243 (0) H3C-Product-ID = "H3C S6812-48X6C" (0) H3C-NAS-Startup-Timestamp = 1609459214 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "netnoc", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop (0) sql: EXPAND %{User-Name} (0) sql: --> netnoc (0) sql: SQL-User-Name set to 'netnoc' rlm_sql (sql): Reserved connection (0) (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (0) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'netnoc' ORDER BY id (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'netnoc' ORDER BY id (0) sql: User found in radcheck table (0) sql: Conditional check items matched, merging assignment check items (0) sql: MD5-Password := 0x6466346638383237653136313136306566383961303439343861363962323139 (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (0) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'netnoc' ORDER BY id (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'netnoc' ORDER BY id (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'netnoc' ORDER BY priority (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'netnoc' ORDER BY priority (0) sql: User not found in any groups rlm_sql (sql): Released connection (0) Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX socket, server version 11.2.2-MariaDB-log, protocol version 10 (0) [sql] = ok (0) [expiration] = noop (0) [logintime] = noop (0) pap: Normalizing MD5-Password from hex encoding, 32 bytes -> 16 bytes (0) [pap] = updated (0) } # authorize = updated (0) Found Auth-Type = PAP (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Auth-Type PAP { (0) pap: Login attempt with password (0) pap: Comparing with "known-good" MD5-Password (0) pap: User authenticated successfully (0) [pap] = ok (0) } # Auth-Type PAP = ok (0) # Executing section post-auth from file /etc/raddb/sites-enabled/default (0) post-auth { (0) update { (0) No attributes updated (0) } # update = noop (0) sql: EXPAND .query (0) sql: --> .query (0) sql: Using query template 'query' rlm_sql (sql): Reserved connection (1) (0) sql: EXPAND %{User-Name} (0) sql: --> netnoc (0) sql: SQL-User-Name set to 'netnoc' (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'netnoc', '123456', 'Access-Accept', '2023-12-05 10: 07:15.051206') (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'netnoc', '123456', 'Access-Accept', '2023 -12-05 10:07:15.051206') (0) sql: SQL query returned: success (0) sql: 1 record(s) updated rlm_sql (sql): Released connection (1) (0) [sql] = ok (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # post-auth = ok (0) Sent Access-Accept Id 228 from 192.168.2.118:1812 to 192.168.1.243:38272 length 0 (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 228 with timestamp +5 Ready to process requests (1) Received Access-Request Id 175 from 192.168.1.244:63378 to 192.168.2.118:1812 length 170 (1) User-Name = "netnoc" (1) User-Password = "123456" (1) Service-Type = Administrative-User (1) Framed-Protocol = X.75-Synchronous (1) Framed-IP-Address = 192.168.2.1 (1) NAS-Identifier = "4F-CE6857-ASW244" (1) NAS-Port-Type = Virtual (1) NAS-IP-Address = 192.168.1.244 (1) Huawei-Startup-Stamp = 1701770673 (1) Huawei-Version = "Huawei VRP Software Version" (1) Huawei-Product-ID = "VRP" (1) Message-Authenticator = 0x83f55529c0423e10fb1e141aa00a5fff (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "netnoc", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: No EAP-Message, not doing EAP (1) [eap] = noop (1) [files] = noop (1) sql: EXPAND %{User-Name} (1) sql: --> netnoc (1) sql: SQL-User-Name set to 'netnoc' rlm_sql (sql): Reserved connection (2) (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'netnoc' ORDER BY id (1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'netnoc' ORDER BY id (1) sql: User found in radcheck table (1) sql: Conditional check items matched, merging assignment check items (1) sql: MD5-Password := 0x6466346638383237653136313136306566383961303439343861363962323139 (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'netnoc' ORDER BY id (1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'netnoc' ORDER BY id (1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (1) sql: --> SELECT groupname FROM radusergroup WHERE username = 'netnoc' ORDER BY priority (1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'netnoc' ORDER BY priority (1) sql: User not found in any groups rlm_sql (sql): Released connection (2) Need 4 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX socket, server version 11.2.2-MariaDB-log, protocol version 10 (1) [sql] = ok (1) [expiration] = noop (1) [logintime] = noop (1) pap: Normalizing MD5-Password from hex encoding, 32 bytes -> 16 bytes (1) [pap] = updated (1) } # authorize = updated (1) Found Auth-Type = PAP (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Auth-Type PAP { (1) pap: Login attempt with password (1) pap: Comparing with "known-good" MD5-Password (1) pap: User authenticated successfully (1) [pap] = ok (1) } # Auth-Type PAP = ok (1) # Executing section post-auth from file /etc/raddb/sites-enabled/default (1) post-auth { (1) update { (1) No attributes updated (1) } # update = noop (1) sql: EXPAND .query (1) sql: --> .query (1) sql: Using query template 'query' rlm_sql (sql): Reserved connection (3) (1) sql: EXPAND %{User-Name} (1) sql: --> netnoc (1) sql: SQL-User-Name set to 'netnoc' (1) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (1) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'netnoc', '123456', 'Access-Accept', '2023-12-05 10: 07:21.420568') (1) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'netnoc', '123456', 'Access-Accept', '2023 -12-05 10:07:21.420568') (1) sql: SQL query returned: success (1) sql: 1 record(s) updated rlm_sql (sql): Released connection (3) (1) [sql] = ok (1) [exec] = noop (1) policy remove_reply_message_if_eap { (1) if (&reply:EAP-Message && &reply:Reply-Message) { (1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (1) else { (1) [noop] = noop (1) } # else = noop (1) } # policy remove_reply_message_if_eap = noop (1) } # post-auth = ok (1) Sent Access-Accept Id 175 from 192.168.2.118:1812 to 192.168.1.244:63378 length 0 (1) Finished request Waking up in 4.9 seconds *What is puzzling is that the user "netnoc" exists on my mysql, but when using H3C network supplier products, it will prompt that the user does not exist. I have repeatedly confirmed that there is no problem with the switch configuration file. This problem will not exist when testing with Cisco ACS.* *The following is the mysql account information：* MariaDB [radiusdb]> SELECT * FROM radcheck; +----+----------+--------------------+----+----------------------------------+ | id | username | attribute | op | value | +----+----------+--------------------+----+----------------------------------+ | 1 | netnoc | MD5-Password | := | df4f8827e161sdfg56a04948a69b219 | *The following is my network configuration file using H3C S6812-48X6C. I tried to use both freeradius and system domains but failed, which is very frustrating.* local-user usermgmt service-type ssh terminal authorization-attribute level 3 password cipher sjkak25u98sdk quit ssh server enable ssh user usermgmt service-type all authentication-type password dot1x dot1x authentication-method pap domain default enable freeradius(system) radius scheme freeradius primary authentication 192.168.2.118 key simple demo_radius_secret user-name-format without-domain quit radius scheme system user-name-format without-domain quit domain freeradius authentication login radius-scheme freeradius local quit domain system authentication login radius-scheme freeradius local quit user-interface vty 0 4 acl 2000 inbound authentication-mode scheme protocol inbound ssh * I don’t know if providing the above information will be helpful or troublesome to you. If so, I'm so sorry! I look forward to having you reply to my email again if I need to provide more information. At the same time, I also look forward to your help me solve this problem! Thanks everyone!* * alex007*

3 12

Issue installing FreeRADIUS 3.2.3 MySQL module.
by Mucci Andrea 19 Dec '23

19 Dec '23

Hi All, I'm installing the latest stable version of FreeRADIUS (3.2.3) on the Rhel 8.9 operating system, via the networkradius repository "NetworkRADIUS-8". I have to interface with MariaDB version 10.5, so I have to install the "freeradius-mysql" package. The installation has "mysql-common" and "mysql-libs" dependencies which however conflict with the installed libraries of the MariaDB server. So, it doesn't let me install the "freeradius-mysql" package. Anyone have any idea how I can solve this?? Best Regards Andrea [root@OFVM01 /]# yum install freeradius-mysql Dependencies resolved. ======================================================================================================================================================================================================================================================================= Package Architecture Version Repository Size ======================================================================================================================================================================================================================================================================= Installing: freeradius-mysql x86_64 3.2.3-1.el8 networkradius 15 k Installing dependencies: mysql-common x86_64 8.0.32-1.module+el8.8.0+18446+fca6280e rhel-8-for-x86_64-appstream-rpms 137 k mysql-libs x86_64 8.0.32-1.module+el8.8.0+18446+fca6280e rhel-8-for-x86_64-appstream-rpms 1.5 M Enabling module streams: mysql 8.0 Transaction Summary ======================================================================================================================================================================================================================================================================= Install 3 Packages Total size: 1.6 M Installed size: 7.8 M Is this ok [y/N]: y Downloading Packages: [SKIPPED] mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64.rpm: Already downloaded [SKIPPED] mysql-libs-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64.rpm: Already downloaded [SKIPPED] freeradius-mysql-3.2.3-1.el8.x86_64.rpm: Already downloaded Running transaction check Transaction check succeeded. Running transaction test The downloaded packages were saved in cache until the next successful transaction. You can remove cached packages by executing 'yum clean packages'. Error: Transaction test error: file /usr/share/mysql/charsets/Index.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/armscii8.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/ascii.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/cp1250.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/cp1251.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/cp1256.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/cp1257.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/cp850.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/cp852.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/cp866.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/dec8.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/geostd8.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/greek.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/hebrew.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/hp8.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/keybcs2.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/koi8r.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/koi8u.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/latin1.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/latin2.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/latin5.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/latin7.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/macce.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/macroman.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 file /usr/share/mysql/charsets/swe7.xml from install of mysql-common-8.0.32-1.module+el8.8.0+18446+fca6280e.x86_64 conflicts with file from package MariaDB-common-10.5.10-1.el8.x86_64 [root@OFVM01 /]#

4 4

Help with Freeradius and Google Suite LDAP
by Chris Bradley 16 Dec '23

16 Dec '23

Hello everyone! :) I have this working but it's not working for all of our users. We have users in our Gsuite with to different email addresses: domain.k12.in.us and students.domain.k12.in.us I can authenticate users from one or the other by modifying the ldap file under mods-enabled and changing the base_DN to match whichever group I want to authenticate. Can anyone, at a very simple level, explain to me how to allow the freeradius server to authenticate users from two base_dn (domain.k12.in.us and students.k12.in.us) using a single server? I've been tinkering with the files and I'm not having any luck. Thanks! -- This message originated from Bartholomew Consolidated School Corporation, Columbus, Indiana. The message and any attachments may be confidential or privileged and are intended only for the individual or entity identified above as the addressee. This email should not be disseminated, distributed, or copied. If you are not the addressee, or if this message has been addressed to you in error, you are not authorized to read, copy or distribute this message or any attachments; and we ask that you please delete it and notify the sender by return e-mail. Delivery of this message and any attachments to any person other than the intended recipient(s) is not intended in any way to waive confidentiality or a privilege. All personal messages express views only of the sender, which are not to be attributed to Bartholomew Consolidated School Corporation, and may not be copied or distributed without this statement.

3 2

Configuring Separate Log File for rlm_ldap Module
by dextá 15 Dec '23

15 Dec '23

hi, Is it possible to configure a separate log file for the rlm_ldap module through rlm_linelog or rlm_detail?

2 2