- Freeradius-Users - lists.freeradius.org

freeradius doesn't see user in group (Active Directory) but user belong to this group
by stefan nowak 04 Jul '15

04 Jul '15

Hi All, since few days I've stocked with configuration freeradius. All works good except one thing. I can't get info from Active Directory to freeradius in which group user belong (this one I need to set vlan depend on group). My version freeradius is 3.0.4 as you can see below user "newuser" participate in group "computers", here`s output from ldapsearch: dn: CN=newuser,CN=Users,DC=test,DC=ad,DC=com objectClass: top objectClass: person objectClass: organizationalPerson objectClass: user cn: newuser givenName: newuser distinguishedName: CN=newuser,CN=Users,DC=test,DC=ad,DC=com instanceType: 4 whenCreated: 20150702132126.0Z whenChanged: 20150703105127.0Z displayName: newuser uSNCreated: 82039 memberOf: CN=computers,CN=Users,DC=test,DC=ad,DC=com uSNChanged: 90187 name: newuser objectGUID:: XX+6g4wMJEGdDfEOZF5Rgw== userAccountControl: 66048 badPwdCount: 0 codePage: 0 countryCode: 0 badPasswordTime: 0 lastLogoff: 0 lastLogon: 0 pwdLastSet: 130803168865078125 primaryGroupID: 513 objectSid:: AQUAAAAAAAUVAAAAR3zVX0Ki+LP5AMXOVQQAAA== accountExpires: 9223372036854775807 logonCount: 0 sAMAccountName: newuser sAMAccountType: 805306368 userPrincipalName: newuser(a)test.ad.com objectCategory: CN=Person,CN=Schema,CN=Configuration,DC=test,DC=ad,DC=com dSCorePropagationData: 16010101000000.0Z lastLogonTimestamp: 130803172388710937 from log output I see that user "newuser" get access-accept but freeradius didn`t find him in group "computers" here is output: Received Access-Request Id 182 from 192.168.0.2:1812 to 192.168.0.10:1812 length 129 NAS-IP-Address = 192.168.0.2 NAS-Port = 50024 NAS-Port-Type = Ethernet User-Name = 'newuser' Called-Station-Id = '00-16-9D-D3-40-D8' Calling-Station-Id = '68-B5-99-C8-B0-5E' Service-Type = Framed-User Framed-MTU = 1500 EAP-Message = 0x0200000c016e657775736572 Message-Authenticator = 0x4331712c3046bdcd9eb1614539cc6375 (0) Received Access-Request packet from host 192.168.0.2 port 1812, id=182, length=129 (0) NAS-IP-Address = 192.168.0.2 (0) NAS-Port = 50024 (0) NAS-Port-Type = Ethernet (0) User-Name = 'newuser' (0) Called-Station-Id = '00-16-9D-D3-40-D8' (0) Calling-Station-Id = '68-B5-99-C8-B0-5E' (0) Service-Type = Framed-User (0) Framed-MTU = 1500 (0) EAP-Message = 0x0200000c016e657775736572 (0) Message-Authenticator = 0x4331712c3046bdcd9eb1614539cc6375 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) filter_username filter_username { (0) if (!&User-Name) (0) if (!&User-Name) -> FALSE (0) if (&User-Name =~ / /) (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@.*@/ ) (0) if (&User-Name =~ /@.*@/ ) -> FALSE (0) if (&User-Name =~ /\\.\\./ ) (0) if (&User-Name =~ /\\.\\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\\.$/) (0) if (&User-Name =~ /\\.$/) -> FALSE (0) if (&User-Name =~ /(a)\\./) (0) if (&User-Name =~ /(a)\\./) -> FALSE (0) } # filter_username filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix : Checking for suffix after "@" (0) suffix : No '@' in User-Name = "newuser", looking up realm NULL (0) suffix : No such realm "NULL" (0) [suffix] = noop (0) eap : Peer sent code Response (2) ID 0 length 12 (0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = EAP (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap : Peer sent method Identity (1) (0) eap : Calling eap_peap to process EAP data (0) eap_peap : Flushing SSL sessions (of #0) (0) eap_peap : Initiate (0) eap_peap : Start returned 1 (0) eap : New EAP session, adding 'State' attribute to reply 0x0e9027300e913e66 (0) [eap] = handled (0) } # authenticate = handled (0) Sending Access-Challenge packet to host 192.168.0.2 port 1812, id=182, length=0 (0) EAP-Message = 0x010100061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x0e9027300e913e6603c734ef610afcab Sending Access-Challenge Id 182 from 192.168.0.10:1812 to 192.168.0.2:1812 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0e9027300e913e6603c734ef610afcab (0) Finished request Waking up in 0.3 seconds. Received Access-Request Id 183 from 192.168.0.2:1812 to 192.168.0.10:1812 length 276 NAS-IP-Address = 192.168.0.2 NAS-Port = 50024 NAS-Port-Type = Ethernet User-Name = 'newuser' Called-Station-Id = '00-16-9D-D3-40-D8' Calling-Station-Id = '68-B5-99-C8-B0-5E' Service-Type = Framed-User Framed-MTU = 1500 State = 0x0e9027300e913e6603c734ef610afcab EAP-Message = 0x0201008d198000000083160301007e0100007a0301559664033b1b4862038b2d1367a8d5b31031ef49921dca1e46e5720f5b2fa8f320fa4af0c0ab28637bf7d426826fc4d55981527e8e975dcc90dc4e38e9fbae1d940018002f00350005000ac013c014c009c00a003200380013000401000019ff01000100000a0006000400170018000b0002010000230000 Message-Authenticator = 0x266af039e3fea82832098be1d93cc75f (1) Received Access-Request packet from host 192.168.0.2 port 1812, id=183, length=276 (1) NAS-IP-Address = 192.168.0.2 (1) NAS-Port = 50024 (1) NAS-Port-Type = Ethernet (1) User-Name = 'newuser' (1) Called-Station-Id = '00-16-9D-D3-40-D8' (1) Calling-Station-Id = '68-B5-99-C8-B0-5E' (1) Service-Type = Framed-User (1) Framed-MTU = 1500 (1) State = 0x0e9027300e913e6603c734ef610afcab (1) EAP-Message = 0x0201008d198000000083160301007e0100007a0301559664033b1b4862038b2d1367a8d5b31031ef49921dca1e46e5720f5b2fa8f320fa4af0c0ab28637bf7d426826fc4d55981527e8e975dcc90dc4e38e9fbae1d940018002f00350005000ac013c014c009c00a003200380013000401000019ff01000100000a0006000400170018000b0002010000230000 (1) Message-Authenticator = 0x266af039e3fea82832098be1d93cc75f (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) filter_username filter_username { (1) if (!&User-Name) (1) if (!&User-Name) -> FALSE (1) if (&User-Name =~ / /) (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@.*@/ ) (1) if (&User-Name =~ /@.*@/ ) -> FALSE (1) if (&User-Name =~ /\\.\\./ ) (1) if (&User-Name =~ /\\.\\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\\.$/) (1) if (&User-Name =~ /\\.$/) -> FALSE (1) if (&User-Name =~ /(a)\\./) (1) if (&User-Name =~ /(a)\\./) -> FALSE (1) } # filter_username filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix : Checking for suffix after "@" (1) suffix : No '@' in User-Name = "newuser", looking up realm NULL (1) suffix : No such realm "NULL" (1) [suffix] = noop (1) eap : Peer sent code Response (2) ID 1 length 141 (1) eap : Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = EAP (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap : Expiring EAP session with state 0x0e9027300e913e66 (1) eap : Finished EAP session with state 0x0e9027300e913e66 (1) eap : Previous EAP request found for state 0x0e9027300e913e66, released from the list (1) eap : Peer sent method PEAP (25) (1) eap : EAP PEAP (25) (1) eap : Calling eap_peap to process EAP data (1) eap_peap : processing EAP-TLS TLS Length 131 (1) eap_peap : Length Included (1) eap_peap : eaptls_verify returned 11 (1) eap_peap : (other): before/accept initialization (1) eap_peap : TLS_accept: before/accept initialization (1) eap_peap : <<< TLS 1.0 Handshake [length 007e], ClientHello SSL: Client requested cached session fa4af0c0ab28637bf7d426826fc4d55981527e8e975dcc90dc4e38e9fbae1d94 (1) eap_peap : TLS_accept: SSLv3 read client hello A (1) eap_peap : >>> TLS 1.0 Handshake [length 0051], ServerHello (1) eap_peap : TLS_accept: SSLv3 write server hello A (1) eap_peap : >>> TLS 1.0 Handshake [length 08d0], Certificate (1) eap_peap : TLS_accept: SSLv3 write certificate A (1) eap_peap : >>> TLS 1.0 Handshake [length 0004], ServerHelloDone (1) eap_peap : TLS_accept: SSLv3 write server done A (1) eap_peap : TLS_accept: SSLv3 flush data (1) eap_peap : TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode (1) eap_peap : eaptls_process returned 13 (1) eap_peap : FR_TLS_HANDLED (1) eap : New EAP session, adding 'State' attribute to reply 0x0e9027300f923e66 (1) [eap] = handled (1) } # authenticate = handled (1) Sending Access-Challenge packet to host 192.168.0.2 port 1812, id=183, length=0 (1) EAP-Message = 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 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x0e9027300f923e6603c734ef610afcab Sending Access-Challenge Id 183 from 192.168.0.10:1812 to 192.168.0.2:1812 EAP-Message = 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 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0e9027300f923e6603c734ef610afcab (1) Finished request Waking up in 0.3 seconds. Received Access-Request Id 184 from 192.168.0.2:1812 to 192.168.0.10:1812 length 141 NAS-IP-Address = 192.168.0.2 NAS-Port = 50024 NAS-Port-Type = Ethernet User-Name = 'newuser' Called-Station-Id = '00-16-9D-D3-40-D8' Calling-Station-Id = '68-B5-99-C8-B0-5E' Service-Type = Framed-User Framed-MTU = 1500 State = 0x0e9027300f923e6603c734ef610afcab EAP-Message = 0x020200061900 Message-Authenticator = 0x8f82b650b4b634e464ffc5f8d5f78feb (2) Received Access-Request packet from host 192.168.0.2 port 1812, id=184, length=141 (2) NAS-IP-Address = 192.168.0.2 (2) NAS-Port = 50024 (2) NAS-Port-Type = Ethernet (2) User-Name = 'newuser' (2) Called-Station-Id = '00-16-9D-D3-40-D8' (2) Calling-Station-Id = '68-B5-99-C8-B0-5E' (2) Service-Type = Framed-User (2) Framed-MTU = 1500 (2) State = 0x0e9027300f923e6603c734ef610afcab (2) EAP-Message = 0x020200061900 (2) Message-Authenticator = 0x8f82b650b4b634e464ffc5f8d5f78feb (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) filter_username filter_username { (2) if (!&User-Name) (2) if (!&User-Name) -> FALSE (2) if (&User-Name =~ / /) (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@.*@/ ) (2) if (&User-Name =~ /@.*@/ ) -> FALSE (2) if (&User-Name =~ /\\.\\./ ) (2) if (&User-Name =~ /\\.\\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\\.$/) (2) if (&User-Name =~ /\\.$/) -> FALSE (2) if (&User-Name =~ /(a)\\./) (2) if (&User-Name =~ /(a)\\./) -> FALSE (2) } # filter_username filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix : Checking for suffix after "@" (2) suffix : No '@' in User-Name = "newuser", looking up realm NULL (2) suffix : No such realm "NULL" (2) [suffix] = noop (2) eap : Peer sent code Response (2) ID 2 length 6 (2) eap : Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = EAP (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap : Expiring EAP session with state 0x0e9027300f923e66 (2) eap : Finished EAP session with state 0x0e9027300f923e66 (2) eap : Previous EAP request found for state 0x0e9027300f923e66, released from the list (2) eap : Peer sent method PEAP (25) (2) eap : EAP PEAP (25) (2) eap : Calling eap_peap to process EAP data (2) eap_peap : processing EAP-TLS (2) eap_peap : Received TLS ACK (2) eap_peap : Received TLS ACK (2) eap_peap : ACK handshake fragment handler (2) eap_peap : eaptls_verify returned 1 (2) eap_peap : eaptls_process returned 13 (2) eap_peap : FR_TLS_HANDLED (2) eap : New EAP session, adding 'State' attribute to reply 0x0e9027300c933e66 (2) [eap] = handled (2) } # authenticate = handled (2) Sending Access-Challenge packet to host 192.168.0.2 port 1812, id=184, length=0 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x0e9027300c933e6603c734ef610afcab Sending Access-Challenge Id 184 from 192.168.0.10:1812 to 192.168.0.2:1812 EAP-Message = 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 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0e9027300c933e6603c734ef610afcab (2) Finished request Waking up in 0.3 seconds. Received Access-Request Id 185 from 192.168.0.2:1812 to 192.168.0.10:1812 length 141 NAS-IP-Address = 192.168.0.2 NAS-Port = 50024 NAS-Port-Type = Ethernet User-Name = 'newuser' Called-Station-Id = '00-16-9D-D3-40-D8' Calling-Station-Id = '68-B5-99-C8-B0-5E' Service-Type = Framed-User Framed-MTU = 1500 State = 0x0e9027300c933e6603c734ef610afcab EAP-Message = 0x020300061900 Message-Authenticator = 0x4612243013b59207a7128ea3f82af7c3 (3) Received Access-Request packet from host 192.168.0.2 port 1812, id=185, length=141 (3) NAS-IP-Address = 192.168.0.2 (3) NAS-Port = 50024 (3) NAS-Port-Type = Ethernet (3) User-Name = 'newuser' (3) Called-Station-Id = '00-16-9D-D3-40-D8' (3) Calling-Station-Id = '68-B5-99-C8-B0-5E' (3) Service-Type = Framed-User (3) Framed-MTU = 1500 (3) State = 0x0e9027300c933e6603c734ef610afcab (3) EAP-Message = 0x020300061900 (3) Message-Authenticator = 0x4612243013b59207a7128ea3f82af7c3 (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) filter_username filter_username { (3) if (!&User-Name) (3) if (!&User-Name) -> FALSE (3) if (&User-Name =~ / /) (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@.*@/ ) (3) if (&User-Name =~ /@.*@/ ) -> FALSE (3) if (&User-Name =~ /\\.\\./ ) (3) if (&User-Name =~ /\\.\\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\\.$/) (3) if (&User-Name =~ /\\.$/) -> FALSE (3) if (&User-Name =~ /(a)\\./) (3) if (&User-Name =~ /(a)\\./) -> FALSE (3) } # filter_username filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix : Checking for suffix after "@" (3) suffix : No '@' in User-Name = "newuser", looking up realm NULL (3) suffix : No such realm "NULL" (3) [suffix] = noop (3) eap : Peer sent code Response (2) ID 3 length 6 (3) eap : Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = EAP (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap : Expiring EAP session with state 0x0e9027300c933e66 (3) eap : Finished EAP session with state 0x0e9027300c933e66 (3) eap : Previous EAP request found for state 0x0e9027300c933e66, released from the list (3) eap : Peer sent method PEAP (25) (3) eap : EAP PEAP (25) (3) eap : Calling eap_peap to process EAP data (3) eap_peap : processing EAP-TLS (3) eap_peap : Received TLS ACK (3) eap_peap : Received TLS ACK (3) eap_peap : ACK handshake fragment handler (3) eap_peap : eaptls_verify returned 1 (3) eap_peap : eaptls_process returned 13 (3) eap_peap : FR_TLS_HANDLED (3) eap : New EAP session, adding 'State' attribute to reply 0x0e9027300d943e66 (3) [eap] = handled (3) } # authenticate = handled (3) Sending Access-Challenge packet to host 192.168.0.2 port 1812, id=185, length=0 (3) EAP-Message = 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 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x0e9027300d943e6603c734ef610afcab Sending Access-Challenge Id 185 from 192.168.0.10:1812 to 192.168.0.2:1812 EAP-Message = 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 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0e9027300d943e6603c734ef610afcab (3) Finished request Waking up in 0.2 seconds. Received Access-Request Id 186 from 192.168.0.2:1812 to 192.168.0.10:1812 length 473 NAS-IP-Address = 192.168.0.2 NAS-Port = 50024 NAS-Port-Type = Ethernet User-Name = 'newuser' Called-Station-Id = '00-16-9D-D3-40-D8' Calling-Station-Id = '68-B5-99-C8-B0-5E' Service-Type = Framed-User Framed-MTU = 1500 State = 0x0e9027300d943e6603c734ef610afcab EAP-Message = 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 Message-Authenticator = 0x1b895bbbb9e7981ab29d96346a062a54 (4) Received Access-Request packet from host 192.168.0.2 port 1812, id=186, length=473 (4) NAS-IP-Address = 192.168.0.2 (4) NAS-Port = 50024 (4) NAS-Port-Type = Ethernet (4) User-Name = 'newuser' (4) Called-Station-Id = '00-16-9D-D3-40-D8' (4) Calling-Station-Id = '68-B5-99-C8-B0-5E' (4) Service-Type = Framed-User (4) Framed-MTU = 1500 (4) State = 0x0e9027300d943e6603c734ef610afcab (4) EAP-Message = 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 (4) Message-Authenticator = 0x1b895bbbb9e7981ab29d96346a062a54 (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) filter_username filter_username { (4) if (!&User-Name) (4) if (!&User-Name) -> FALSE (4) if (&User-Name =~ / /) (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@.*@/ ) (4) if (&User-Name =~ /@.*@/ ) -> FALSE (4) if (&User-Name =~ /\\.\\./ ) (4) if (&User-Name =~ /\\.\\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\\.$/) (4) if (&User-Name =~ /\\.$/) -> FALSE (4) if (&User-Name =~ /(a)\\./) (4) if (&User-Name =~ /(a)\\./) -> FALSE (4) } # filter_username filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix : Checking for suffix after "@" (4) suffix : No '@' in User-Name = "newuser", looking up realm NULL (4) suffix : No such realm "NULL" (4) [suffix] = noop (4) eap : Peer sent code Response (2) ID 4 length 336 (4) eap : Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = EAP (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap : Expiring EAP session with state 0x0e9027300d943e66 (4) eap : Finished EAP session with state 0x0e9027300d943e66 (4) eap : Previous EAP request found for state 0x0e9027300d943e66, released from the list (4) eap : Peer sent method PEAP (25) (4) eap : EAP PEAP (25) (4) eap : Calling eap_peap to process EAP data (4) eap_peap : processing EAP-TLS TLS Length 326 (4) eap_peap : Length Included (4) eap_peap : eaptls_verify returned 11 (4) eap_peap : <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange (4) eap_peap : TLS_accept: SSLv3 read client key exchange A (4) eap_peap : <<< TLS 1.0 ChangeCipherSpec [length 0001] (4) eap_peap : <<< TLS 1.0 Handshake [length 0010], Finished (4) eap_peap : TLS_accept: SSLv3 read finished A (4) eap_peap : >>> TLS 1.0 ChangeCipherSpec [length 0001] (4) eap_peap : TLS_accept: SSLv3 write change cipher spec A (4) eap_peap : >>> TLS 1.0 Handshake [length 0010], Finished (4) eap_peap : TLS_accept: SSLv3 write finished A (4) eap_peap : TLS_accept: SSLv3 flush data SSL: adding session 48fd8119fa32c7cb48b60449437ed3f1edad01e5ff81191e7be8d62b3e5f17c4 to cache (4) eap_peap : (other): SSL negotiation finished successfully SSL Connection Established (4) eap_peap : eaptls_process returned 13 (4) eap_peap : FR_TLS_HANDLED (4) eap : New EAP session, adding 'State' attribute to reply 0x0e9027300a953e66 (4) [eap] = handled (4) } # authenticate = handled (4) Sending Access-Challenge packet to host 192.168.0.2 port 1812, id=186, length=0 (4) EAP-Message = 0x0105004119001403010001011603010030aae4f10e97ee19adae53413d9aa1d8d43c053c8d9e737783e7b55e6ba93fe09df382bb6903423cc0a3e1e7c0d7581e6f (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x0e9027300a953e6603c734ef610afcab Sending Access-Challenge Id 186 from 192.168.0.10:1812 to 192.168.0.2:1812 EAP-Message = 0x0105004119001403010001011603010030aae4f10e97ee19adae53413d9aa1d8d43c053c8d9e737783e7b55e6ba93fe09df382bb6903423cc0a3e1e7c0d7581e6f Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0e9027300a953e6603c734ef610afcab (4) Finished request Waking up in 0.2 seconds. Received Access-Request Id 187 from 192.168.0.2:1812 to 192.168.0.10:1812 length 141 NAS-IP-Address = 192.168.0.2 NAS-Port = 50024 NAS-Port-Type = Ethernet User-Name = 'newuser' Called-Station-Id = '00-16-9D-D3-40-D8' Calling-Station-Id = '68-B5-99-C8-B0-5E' Service-Type = Framed-User Framed-MTU = 1500 State = 0x0e9027300a953e6603c734ef610afcab EAP-Message = 0x020500061900 Message-Authenticator = 0xdac0ce591021e82f7d39f28aef2399d2 (5) Received Access-Request packet from host 192.168.0.2 port 1812, id=187, length=141 (5) NAS-IP-Address = 192.168.0.2 (5) NAS-Port = 50024 (5) NAS-Port-Type = Ethernet (5) User-Name = 'newuser' (5) Called-Station-Id = '00-16-9D-D3-40-D8' (5) Calling-Station-Id = '68-B5-99-C8-B0-5E' (5) Service-Type = Framed-User (5) Framed-MTU = 1500 (5) State = 0x0e9027300a953e6603c734ef610afcab (5) EAP-Message = 0x020500061900 (5) Message-Authenticator = 0xdac0ce591021e82f7d39f28aef2399d2 (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) filter_username filter_username { (5) if (!&User-Name) (5) if (!&User-Name) -> FALSE (5) if (&User-Name =~ / /) (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@.*@/ ) (5) if (&User-Name =~ /@.*@/ ) -> FALSE (5) if (&User-Name =~ /\\.\\./ ) (5) if (&User-Name =~ /\\.\\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\\.$/) (5) if (&User-Name =~ /\\.$/) -> FALSE (5) if (&User-Name =~ /(a)\\./) (5) if (&User-Name =~ /(a)\\./) -> FALSE (5) } # filter_username filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix : Checking for suffix after "@" (5) suffix : No '@' in User-Name = "newuser", looking up realm NULL (5) suffix : No such realm "NULL" (5) [suffix] = noop (5) eap : Peer sent code Response (2) ID 5 length 6 (5) eap : Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = EAP (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap : Expiring EAP session with state 0x0e9027300a953e66 (5) eap : Finished EAP session with state 0x0e9027300a953e66 (5) eap : Previous EAP request found for state 0x0e9027300a953e66, released from the list (5) eap : Peer sent method PEAP (25) (5) eap : EAP PEAP (25) (5) eap : Calling eap_peap to process EAP data (5) eap_peap : processing EAP-TLS (5) eap_peap : Received TLS ACK (5) eap_peap : Received TLS ACK (5) eap_peap : ACK handshake is finished (5) eap_peap : eaptls_verify returned 3 (5) eap_peap : eaptls_process returned 3 (5) eap_peap : FR_TLS_SUCCESS (5) eap_peap : Session established. Decoding tunneled attributes (5) eap_peap : Peap state TUNNEL ESTABLISHED (5) eap : New EAP session, adding 'State' attribute to reply 0x0e9027300b963e66 (5) [eap] = handled (5) } # authenticate = handled (5) Sending Access-Challenge packet to host 192.168.0.2 port 1812, id=187, length=0 (5) EAP-Message = 0x0106002b190017030100201ac493daff282d88bd079004b7a4124bc4a88fcee422591647b8a0784b2254a6 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x0e9027300b963e6603c734ef610afcab Sending Access-Challenge Id 187 from 192.168.0.10:1812 to 192.168.0.2:1812 EAP-Message = 0x0106002b190017030100201ac493daff282d88bd079004b7a4124bc4a88fcee422591647b8a0784b2254a6 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0e9027300b963e6603c734ef610afcab (5) Finished request Waking up in 0.2 seconds. Received Access-Request Id 188 from 192.168.0.2:1812 to 192.168.0.10:1812 length 178 NAS-IP-Address = 192.168.0.2 NAS-Port = 50024 NAS-Port-Type = Ethernet User-Name = 'newuser' Called-Station-Id = '00-16-9D-D3-40-D8' Calling-Station-Id = '68-B5-99-C8-B0-5E' Service-Type = Framed-User Framed-MTU = 1500 State = 0x0e9027300b963e6603c734ef610afcab EAP-Message = 0x0206002b19001703010020a4f998f13de99ca28ef10b62394a61c9b1a25d73a60b123f5ad5f64fdd887c6a Message-Authenticator = 0x1794290733e67632bc38f2f4aa840390 (6) Received Access-Request packet from host 192.168.0.2 port 1812, id=188, length=178 (6) NAS-IP-Address = 192.168.0.2 (6) NAS-Port = 50024 (6) NAS-Port-Type = Ethernet (6) User-Name = 'newuser' (6) Called-Station-Id = '00-16-9D-D3-40-D8' (6) Calling-Station-Id = '68-B5-99-C8-B0-5E' (6) Service-Type = Framed-User (6) Framed-MTU = 1500 (6) State = 0x0e9027300b963e6603c734ef610afcab (6) EAP-Message = 0x0206002b19001703010020a4f998f13de99ca28ef10b62394a61c9b1a25d73a60b123f5ad5f64fdd887c6a (6) Message-Authenticator = 0x1794290733e67632bc38f2f4aa840390 (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) filter_username filter_username { (6) if (!&User-Name) (6) if (!&User-Name) -> FALSE (6) if (&User-Name =~ / /) (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@.*@/ ) (6) if (&User-Name =~ /@.*@/ ) -> FALSE (6) if (&User-Name =~ /\\.\\./ ) (6) if (&User-Name =~ /\\.\\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\\.$/) (6) if (&User-Name =~ /\\.$/) -> FALSE (6) if (&User-Name =~ /(a)\\./) (6) if (&User-Name =~ /(a)\\./) -> FALSE (6) } # filter_username filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix : Checking for suffix after "@" (6) suffix : No '@' in User-Name = "newuser", looking up realm NULL (6) suffix : No such realm "NULL" (6) [suffix] = noop (6) eap : Peer sent code Response (2) ID 6 length 43 (6) eap : Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = EAP (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap : Expiring EAP session with state 0x0e9027300b963e66 (6) eap : Finished EAP session with state 0x0e9027300b963e66 (6) eap : Previous EAP request found for state 0x0e9027300b963e66, released from the list (6) eap : Peer sent method PEAP (25) (6) eap : EAP PEAP (25) (6) eap : Calling eap_peap to process EAP data (6) eap_peap : processing EAP-TLS (6) eap_peap : eaptls_verify returned 7 (6) eap_peap : Done initial handshake (6) eap_peap : eaptls_process returned 7 (6) eap_peap : FR_TLS_OK (6) eap_peap : Session established. Decoding tunneled attributes (6) eap_peap : Peap state WAITING FOR INNER IDENTITY (6) eap_peap : Identity - newuser (6) eap_peap : Got inner identity 'newuser' (6) eap_peap : Setting default EAP type for tunneled EAP session (6) eap_peap : Got tunneled request EAP-Message = 0x0206000c016e657775736572 server default { (6) eap_peap : Setting User-Name to newuser Sending tunneled request EAP-Message = 0x0206000c016e657775736572 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = 'newuser' NAS-IP-Address = 192.168.0.2 NAS-Port = 50024 NAS-Port-Type = Ethernet Called-Station-Id = '00-16-9D-D3-40-D8' Calling-Station-Id = '68-B5-99-C8-B0-5E' Service-Type = Framed-User Framed-MTU = 1500 Event-Timestamp = 'Jul 3 2015 14:28:13 CEST' server inner-tunnel { (6) server inner-tunnel { (6) Request: EAP-Message = 0x0206000c016e657775736572 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = 'newuser' NAS-IP-Address = 192.168.0.2 NAS-Port = 50024 NAS-Port-Type = Ethernet Called-Station-Id = '00-16-9D-D3-40-D8' Calling-Station-Id = '68-B5-99-C8-B0-5E' Service-Type = Framed-User Framed-MTU = 1500 Event-Timestamp = 'Jul 3 2015 14:28:13 CEST' (6) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (6) authorize { (6) [chap] = noop (6) [mschap] = noop (6) suffix : Checking for suffix after "@" (6) suffix : No '@' in User-Name = "newuser", looking up realm NULL (6) suffix : No such realm "NULL" (6) [suffix] = noop (6) update control { (6) Proxy-To-Realm := 'LOCAL' (6) } # update control = noop (6) eap : Peer sent code Response (2) ID 6 length 12 (6) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = EAP (6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) authenticate { (6) eap : Peer sent method Identity (1) (6) eap : Calling eap_mschapv2 to process EAP data (6) eap_mschapv2 : Issuing Challenge (6) eap : New EAP session, adding 'State' attribute to reply 0x51469e48514184c8 (6) [eap] = handled (6) } # authenticate = handled (6) Reply: EAP-Message = 0x010700211a0107001c10cfe19b93b6199ab73e048317618488706e657775736572 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x51469e48514184c89c06397edfb2b9f6 (6) } # server inner-tunnel } # server inner-tunnel (6) eap_peap : Got tunneled reply code 11 EAP-Message = 0x010700211a0107001c10cfe19b93b6199ab73e048317618488706e657775736572 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x51469e48514184c89c06397edfb2b9f6 (6) eap_peap : Got tunneled reply RADIUS code 11 EAP-Message = 0x010700211a0107001c10cfe19b93b6199ab73e048317618488706e657775736572 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x51469e48514184c89c06397edfb2b9f6 (6) eap_peap : Got tunneled Access-Challenge (6) eap : New EAP session, adding 'State' attribute to reply 0x0e90273008973e66 (6) [eap] = handled (6) } # authenticate = handled (6) Sending Access-Challenge packet to host 192.168.0.2 port 1812, id=188, length=0 (6) EAP-Message = 0x0107004b190017030100407520c1faa1ff4cfd7a594b2669343aa993d4447045db39c0c1ef6a3af3fa94dd9b822e84eb8895730f1cabf76bc5593ee24398478a98364b6b52fd05dfd32c0a (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x0e90273008973e6603c734ef610afcab Sending Access-Challenge Id 188 from 192.168.0.10:1812 to 192.168.0.2:1812 EAP-Message = 0x0107004b190017030100407520c1faa1ff4cfd7a594b2669343aa993d4447045db39c0c1ef6a3af3fa94dd9b822e84eb8895730f1cabf76bc5593ee24398478a98364b6b52fd05dfd32c0a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0e90273008973e6603c734ef610afcab (6) Finished request Waking up in 0.2 seconds. Received Access-Request Id 189 from 192.168.0.2:1812 to 192.168.0.10:1812 length 242 NAS-IP-Address = 192.168.0.2 NAS-Port = 50024 NAS-Port-Type = Ethernet User-Name = 'newuser' Called-Station-Id = '00-16-9D-D3-40-D8' Calling-Station-Id = '68-B5-99-C8-B0-5E' Service-Type = Framed-User Framed-MTU = 1500 State = 0x0e90273008973e6603c734ef610afcab EAP-Message = 0x0207006b19001703010060daa946c75fc076c70e3dee92725c9fd0e09e9b31f3e9b03e995463f030c9fcacaba7ef76b8890a117b40a4868e689f211491596b2e6acc7481a01ca4d9877415d99f18815dbd2879bca03fa940e258a486def5b5f08936eeade1d0f07ba9abfb Message-Authenticator = 0x0c5af9b3231d04ec974f138a62c938b7 (7) Received Access-Request packet from host 192.168.0.2 port 1812, id=189, length=242 (7) NAS-IP-Address = 192.168.0.2 (7) NAS-Port = 50024 (7) NAS-Port-Type = Ethernet (7) User-Name = 'newuser' (7) Called-Station-Id = '00-16-9D-D3-40-D8' (7) Calling-Station-Id = '68-B5-99-C8-B0-5E' (7) Service-Type = Framed-User (7) Framed-MTU = 1500 (7) State = 0x0e90273008973e6603c734ef610afcab (7) EAP-Message = 0x0207006b19001703010060daa946c75fc076c70e3dee92725c9fd0e09e9b31f3e9b03e995463f030c9fcacaba7ef76b8890a117b40a4868e689f211491596b2e6acc7481a01ca4d9877415d99f18815dbd2879bca03fa940e258a486def5b5f08936eeade1d0f07ba9abfb (7) Message-Authenticator = 0x0c5af9b3231d04ec974f138a62c938b7 (7) # Executing section authorize from file /etc/raddb/sites-enabled/default (7) authorize { (7) filter_username filter_username { (7) if (!&User-Name) (7) if (!&User-Name) -> FALSE (7) if (&User-Name =~ / /) (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@.*@/ ) (7) if (&User-Name =~ /@.*@/ ) -> FALSE (7) if (&User-Name =~ /\\.\\./ ) (7) if (&User-Name =~ /\\.\\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\\.$/) (7) if (&User-Name =~ /\\.$/) -> FALSE (7) if (&User-Name =~ /(a)\\./) (7) if (&User-Name =~ /(a)\\./) -> FALSE (7) } # filter_username filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix : Checking for suffix after "@" (7) suffix : No '@' in User-Name = "newuser", looking up realm NULL (7) suffix : No such realm "NULL" (7) [suffix] = noop (7) eap : Peer sent code Response (2) ID 7 length 107 (7) eap : Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = EAP (7) # Executing group from file /etc/raddb/sites-enabled/default (7) authenticate { (7) eap : Expiring EAP session with state 0x51469e48514184c8 (7) eap : Finished EAP session with state 0x0e90273008973e66 (7) eap : Previous EAP request found for state 0x0e90273008973e66, released from the list (7) eap : Peer sent method PEAP (25) (7) eap : EAP PEAP (25) (7) eap : Calling eap_peap to process EAP data (7) eap_peap : processing EAP-TLS (7) eap_peap : eaptls_verify returned 7 (7) eap_peap : Done initial handshake (7) eap_peap : eaptls_process returned 7 (7) eap_peap : FR_TLS_OK (7) eap_peap : Session established. Decoding tunneled attributes (7) eap_peap : Peap state phase2 (7) eap_peap : EAP type MSCHAPv2 (26) (7) eap_peap : Got tunneled request EAP-Message = 0x020700421a0207003d31cb99020a5de6871ad851f7e89c87138000000000000000008e66b16d791423c5ff26fd315d1cd9423b9866fc53939f0e006e657775736572 server default { (7) eap_peap : Setting User-Name to newuser Sending tunneled request EAP-Message = 0x020700421a0207003d31cb99020a5de6871ad851f7e89c87138000000000000000008e66b16d791423c5ff26fd315d1cd9423b9866fc53939f0e006e657775736572 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = 'newuser' State = 0x51469e48514184c89c06397edfb2b9f6 NAS-IP-Address = 192.168.0.2 NAS-Port = 50024 NAS-Port-Type = Ethernet Called-Station-Id = '00-16-9D-D3-40-D8' Calling-Station-Id = '68-B5-99-C8-B0-5E' Service-Type = Framed-User Framed-MTU = 1500 Event-Timestamp = 'Jul 3 2015 14:28:13 CEST' server inner-tunnel { (7) server inner-tunnel { (7) Request: EAP-Message = 0x020700421a0207003d31cb99020a5de6871ad851f7e89c87138000000000000000008e66b16d791423c5ff26fd315d1cd9423b9866fc53939f0e006e657775736572 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = 'newuser' State = 0x51469e48514184c89c06397edfb2b9f6 NAS-IP-Address = 192.168.0.2 NAS-Port = 50024 NAS-Port-Type = Ethernet Called-Station-Id = '00-16-9D-D3-40-D8' Calling-Station-Id = '68-B5-99-C8-B0-5E' Service-Type = Framed-User Framed-MTU = 1500 Event-Timestamp = 'Jul 3 2015 14:28:13 CEST' (7) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (7) authorize { (7) [chap] = noop (7) [mschap] = noop (7) suffix : Checking for suffix after "@" (7) suffix : No '@' in User-Name = "newuser", looking up realm NULL (7) suffix : No such realm "NULL" (7) [suffix] = noop (7) update control { (7) Proxy-To-Realm := 'LOCAL' (7) } # update control = noop (7) eap : Peer sent code Response (2) ID 7 length 66 (7) eap : No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) [files] = noop rlm_ldap (ldap): Reserved connection (4) (7) ldap : EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (7) ldap : --> (uid=newuser) (7) ldap : EXPAND dc=test,dc=ad,dc=com (7) ldap : --> dc=test,dc=ad,dc=com (7) ldap : Performing search in 'dc=test,dc=ad,dc=com' with filter '(uid=newuser)', scope 'sub' (7) ldap : Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap:// ForestDnsZones.test.ad.com/DC=ForestDnsZones,DC=test,DC=ad,DC=com rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap:// DomainDnsZones.test.ad.com/DC=DomainDnsZones,DC=test,DC=ad,DC=com rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap:// test.ad.com/CN=Configuration,DC=test,DC=ad,DC=com rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (7) ldap : Search returned no results rlm_ldap (ldap): Deleting connection (4) (7) [ldap] = notfound (7) [expiration] = noop (7) [logintime] = noop (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = EAP (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) authenticate { (7) eap : Expiring EAP session with state 0x51469e48514184c8 (7) eap : Finished EAP session with state 0x51469e48514184c8 (7) eap : Previous EAP request found for state 0x51469e48514184c8, released from the list (7) eap : Peer sent method MSCHAPv2 (26) (7) eap : EAP MSCHAPv2 (26) (7) eap : Calling eap_mschapv2 to process EAP data (7) eap_mschapv2 : # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) eap_mschapv2 : Auth-Type MS-CHAP { (7) mschap : Creating challenge hash with username: newuser (7) mschap : Client is using MS-CHAPv2 Executing: /usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}: (7) mschap : EXPAND --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} (7) mschap : --> --username=newuser (7) mschap : Creating challenge hash with username: newuser (7) mschap : EXPAND --challenge=%{%{mschap:Challenge}:-00} (7) mschap : --> --challenge=141c75ef267aec37 (7) mschap : EXPAND --nt-response=%{%{mschap:NT-Response}:-00} (7) mschap : --> --nt-response=8e66b16d791423c5ff26fd315d1cd9423b9866fc53939f0e Program returned code (0) and output 'NT_KEY: 917FDA71960ECCF4DF81D38405F86F42' (7) mschap : Adding MS-CHAPv2 MPPE keys (7) [mschap] = ok (7) } # Auth-Type MS-CHAP = ok MSCHAP Success (7) eap : New EAP session, adding 'State' attribute to reply 0x51469e48504e84c8 (7) [eap] = handled (7) } # authenticate = handled (7) Reply: EAP-Message = 0x010800331a0307002e533d45413244333642323330373038354334373443444233383738423444393141433936393944313533 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x51469e48504e84c89c06397edfb2b9f6 (7) } # server inner-tunnel } # server inner-tunnel (7) eap_peap : Got tunneled reply code 11 EAP-Message = 0x010800331a0307002e533d45413244333642323330373038354334373443444233383738423444393141433936393944313533 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x51469e48504e84c89c06397edfb2b9f6 (7) eap_peap : Got tunneled reply RADIUS code 11 EAP-Message = 0x010800331a0307002e533d45413244333642323330373038354334373443444233383738423444393141433936393944313533 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x51469e48504e84c89c06397edfb2b9f6 (7) eap_peap : Got tunneled Access-Challenge (7) eap : New EAP session, adding 'State' attribute to reply 0x0e90273009983e66 (7) [eap] = handled (7) } # authenticate = handled (7) Sending Access-Challenge packet to host 192.168.0.2 port 1812, id=189, length=0 (7) EAP-Message = 0x0108005b19001703010050f5928f4ef2504f8111ab1eb22a3d7055f034eb84663b65bd07291d795cbd5a872c90146b2738a779cf42d7acd17f1425f25e5139936ce90ece8924c0ddf1dd6d66eb94efda5148cf5b8b62fd2f49fd5b (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x0e90273009983e6603c734ef610afcab Sending Access-Challenge Id 189 from 192.168.0.10:1812 to 192.168.0.2:1812 EAP-Message = 0x0108005b19001703010050f5928f4ef2504f8111ab1eb22a3d7055f034eb84663b65bd07291d795cbd5a872c90146b2738a779cf42d7acd17f1425f25e5139936ce90ece8924c0ddf1dd6d66eb94efda5148cf5b8b62fd2f49fd5b Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0e90273009983e6603c734ef610afcab (7) Finished request Waking up in 4.5 seconds. Received Access-Request Id 190 from 192.168.0.2:1812 to 192.168.0.10:1812 length 178 NAS-IP-Address = 192.168.0.2 NAS-Port = 50024 NAS-Port-Type = Ethernet User-Name = 'newuser' Called-Station-Id = '00-16-9D-D3-40-D8' Calling-Station-Id = '68-B5-99-C8-B0-5E' Service-Type = Framed-User Framed-MTU = 1500 State = 0x0e90273009983e6603c734ef610afcab EAP-Message = 0x0208002b19001703010020e5cacce91e4a996afb3b077c7b388bcf2f40b18a8eb5be8917a8ae01288fd33d Message-Authenticator = 0x56d20e1c3ccff86847412ce9123ecb99 (8) Received Access-Request packet from host 192.168.0.2 port 1812, id=190, length=178 (8) NAS-IP-Address = 192.168.0.2 (8) NAS-Port = 50024 (8) NAS-Port-Type = Ethernet (8) User-Name = 'newuser' (8) Called-Station-Id = '00-16-9D-D3-40-D8' (8) Calling-Station-Id = '68-B5-99-C8-B0-5E' (8) Service-Type = Framed-User (8) Framed-MTU = 1500 (8) State = 0x0e90273009983e6603c734ef610afcab (8) EAP-Message = 0x0208002b19001703010020e5cacce91e4a996afb3b077c7b388bcf2f40b18a8eb5be8917a8ae01288fd33d (8) Message-Authenticator = 0x56d20e1c3ccff86847412ce9123ecb99 (8) # Executing section authorize from file /etc/raddb/sites-enabled/default (8) authorize { (8) filter_username filter_username { (8) if (!&User-Name) (8) if (!&User-Name) -> FALSE (8) if (&User-Name =~ / /) (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@.*@/ ) (8) if (&User-Name =~ /@.*@/ ) -> FALSE (8) if (&User-Name =~ /\\.\\./ ) (8) if (&User-Name =~ /\\.\\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\\.$/) (8) if (&User-Name =~ /\\.$/) -> FALSE (8) if (&User-Name =~ /(a)\\./) (8) if (&User-Name =~ /(a)\\./) -> FALSE (8) } # filter_username filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix : Checking for suffix after "@" (8) suffix : No '@' in User-Name = "newuser", looking up realm NULL (8) suffix : No such realm "NULL" (8) [suffix] = noop (8) eap : Peer sent code Response (2) ID 8 length 43 (8) eap : Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = EAP (8) # Executing group from file /etc/raddb/sites-enabled/default (8) authenticate { (8) eap : Expiring EAP session with state 0x51469e48504e84c8 (8) eap : Finished EAP session with state 0x0e90273009983e66 (8) eap : Previous EAP request found for state 0x0e90273009983e66, released from the list (8) eap : Peer sent method PEAP (25) (8) eap : EAP PEAP (25) (8) eap : Calling eap_peap to process EAP data (8) eap_peap : processing EAP-TLS (8) eap_peap : eaptls_verify returned 7 (8) eap_peap : Done initial handshake (8) eap_peap : eaptls_process returned 7 (8) eap_peap : FR_TLS_OK (8) eap_peap : Session established. Decoding tunneled attributes (8) eap_peap : Peap state phase2 (8) eap_peap : EAP type MSCHAPv2 (26) (8) eap_peap : Got tunneled request EAP-Message = 0x020800061a03 server default { (8) eap_peap : Setting User-Name to newuser Sending tunneled request EAP-Message = 0x020800061a03 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = 'newuser' State = 0x51469e48504e84c89c06397edfb2b9f6 NAS-IP-Address = 192.168.0.2 NAS-Port = 50024 NAS-Port-Type = Ethernet Called-Station-Id = '00-16-9D-D3-40-D8' Calling-Station-Id = '68-B5-99-C8-B0-5E' Service-Type = Framed-User Framed-MTU = 1500 Event-Timestamp = 'Jul 3 2015 14:28:13 CEST' server inner-tunnel { (8) server inner-tunnel { (8) Request: EAP-Message = 0x020800061a03 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = 'newuser' State = 0x51469e48504e84c89c06397edfb2b9f6 NAS-IP-Address = 192.168.0.2 NAS-Port = 50024 NAS-Port-Type = Ethernet Called-Station-Id = '00-16-9D-D3-40-D8' Calling-Station-Id = '68-B5-99-C8-B0-5E' Service-Type = Framed-User Framed-MTU = 1500 Event-Timestamp = 'Jul 3 2015 14:28:13 CEST' (8) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (8) authorize { (8) [chap] = noop (8) [mschap] = noop (8) suffix : Checking for suffix after "@" (8) suffix : No '@' in User-Name = "newuser", looking up realm NULL (8) suffix : No such realm "NULL" (8) [suffix] = noop (8) update control { (8) Proxy-To-Realm := 'LOCAL' (8) } # update control = noop (8) eap : Peer sent code Response (2) ID 8 length 6 (8) eap : No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) [files] = noop rlm_ldap (ldap): Reserved connection (3) (8) ldap : EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (8) ldap : --> (uid=newuser) (8) ldap : EXPAND dc=test,dc=ad,dc=com (8) ldap : --> dc=test,dc=ad,dc=com (8) ldap : Performing search in 'dc=test,dc=ad,dc=com' with filter '(uid=newuser)', scope 'sub' (8) ldap : Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap:// ForestDnsZones.test.ad.com/DC=ForestDnsZones,DC=test,DC=ad,DC=com rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap:// DomainDnsZones.test.ad.com/DC=DomainDnsZones,DC=test,DC=ad,DC=com rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap:// test.ad.com/CN=Configuration,DC=test,DC=ad,DC=com rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (8) ldap : Search returned no results rlm_ldap (ldap): Deleting connection (3) rlm_ldap (ldap): 0 of 3 connections in use. Need more spares rlm_ldap (ldap): Opening additional connection (5) rlm_ldap (ldap): Connecting to 192.168.0.20:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (8) [ldap] = notfound (8) [expiration] = noop (8) [logintime] = noop (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = EAP (8) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (8) authenticate { (8) eap : Expiring EAP session with state 0x51469e48504e84c8 (8) eap : Finished EAP session with state 0x51469e48504e84c8 (8) eap : Previous EAP request found for state 0x51469e48504e84c8, released from the list (8) eap : Peer sent method MSCHAPv2 (26) (8) eap : EAP MSCHAPv2 (26) (8) eap : Calling eap_mschapv2 to process EAP data (8) eap : Freeing handler (8) [eap] = ok (8) } # authenticate = ok (8) # Executing section post-auth from file /etc/raddb/sites-enabled/inner-tunnel (8) post-auth { (8) ldap : EXPAND . (8) ldap : --> . (8) ldap : EXPAND Authenticated at %S (8) ldap : --> Authenticated at 2015-07-03 14:28:13 rlm_ldap (ldap): Reserved connection (5) (8) ldap : EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (8) ldap : --> (uid=newuser) (8) ldap : EXPAND dc=test,dc=ad,dc=com (8) ldap : --> dc=test,dc=ad,dc=com (8) ldap : Performing search in 'dc=test,dc=ad,dc=com' with filter '(uid=newuser)', scope 'sub' (8) ldap : Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap:// ForestDnsZones.test.ad.com/DC=ForestDnsZones,DC=test,DC=ad,DC=com rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap:// DomainDnsZones.test.ad.com/DC=DomainDnsZones,DC=test,DC=ad,DC=com rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap:// test.ad.com/CN=Configuration,DC=test,DC=ad,DC=com rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (8) ldap : Search returned no results rlm_ldap (ldap): Deleting connection (5) (8) [ldap] = notfound (8) } # post-auth = notfound (8) Reply: MS-MPPE-Encryption-Policy = Encryption-Required MS-MPPE-Encryption-Types = 4 MS-MPPE-Send-Key = 0xd4fd4ee6a9d0cfb8627e5435bb5e91c9 MS-MPPE-Recv-Key = 0xd541128d165a6af4aba9ded016dce239 EAP-Message = 0x03080004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = 'newuser' (8) } # server inner-tunnel } # server inner-tunnel (8) eap_peap : Got tunneled reply code 2 MS-MPPE-Encryption-Policy = Encryption-Required MS-MPPE-Encryption-Types = 4 MS-MPPE-Send-Key = 0xd4fd4ee6a9d0cfb8627e5435bb5e91c9 MS-MPPE-Recv-Key = 0xd541128d165a6af4aba9ded016dce239 EAP-Message = 0x03080004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = 'newuser' (8) eap_peap : Got tunneled reply RADIUS code 2 MS-MPPE-Encryption-Policy = Encryption-Required MS-MPPE-Encryption-Types = 4 MS-MPPE-Send-Key = 0xd4fd4ee6a9d0cfb8627e5435bb5e91c9 MS-MPPE-Recv-Key = 0xd541128d165a6af4aba9ded016dce239 EAP-Message = 0x03080004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = 'newuser' (8) eap_peap : Tunneled authentication was successful (8) eap_peap : SUCCESS (8) eap_peap : Saving tunneled attributes for later (8) eap : New EAP session, adding 'State' attribute to reply 0x0e90273006993e66 (8) [eap] = handled (8) } # authenticate = handled (8) Sending Access-Challenge packet to host 192.168.0.2 port 1812, id=190, length=0 (8) EAP-Message = 0x0109002b1900170301002002723a75a206ea487fd592ae1b9d31d8425a2d28fb6a567b530188cd74181696 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x0e90273006993e6603c734ef610afcab Sending Access-Challenge Id 190 from 192.168.0.10:1812 to 192.168.0.2:1812 EAP-Message = 0x0109002b1900170301002002723a75a206ea487fd592ae1b9d31d8425a2d28fb6a567b530188cd74181696 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0e90273006993e6603c734ef610afcab (8) Finished request Waking up in 3.8 seconds. Received Access-Request Id 191 from 192.168.0.2:1812 to 192.168.0.10:1812 length 178 NAS-IP-Address = 192.168.0.2 NAS-Port = 50024 NAS-Port-Type = Ethernet User-Name = 'newuser' Called-Station-Id = '00-16-9D-D3-40-D8' Calling-Station-Id = '68-B5-99-C8-B0-5E' Service-Type = Framed-User Framed-MTU = 1500 State = 0x0e90273006993e6603c734ef610afcab EAP-Message = 0x0209002b1900170301002092fda1c14de27079564bd73fade18792dd8f5f80adf9e4822b95949318de7efb Message-Authenticator = 0xef39ceb8bfa36750354be19a6b2ebf17 (9) Received Access-Request packet from host 192.168.0.2 port 1812, id=191, length=178 (9) NAS-IP-Address = 192.168.0.2 (9) NAS-Port = 50024 (9) NAS-Port-Type = Ethernet (9) User-Name = 'newuser' (9) Called-Station-Id = '00-16-9D-D3-40-D8' (9) Calling-Station-Id = '68-B5-99-C8-B0-5E' (9) Service-Type = Framed-User (9) Framed-MTU = 1500 (9) State = 0x0e90273006993e6603c734ef610afcab (9) EAP-Message = 0x0209002b1900170301002092fda1c14de27079564bd73fade18792dd8f5f80adf9e4822b95949318de7efb (9) Message-Authenticator = 0xef39ceb8bfa36750354be19a6b2ebf17 (9) # Executing section authorize from file /etc/raddb/sites-enabled/default (9) authorize { (9) filter_username filter_username { (9) if (!&User-Name) (9) if (!&User-Name) -> FALSE (9) if (&User-Name =~ / /) (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@.*@/ ) (9) if (&User-Name =~ /@.*@/ ) -> FALSE (9) if (&User-Name =~ /\\.\\./ ) (9) if (&User-Name =~ /\\.\\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\\.$/) (9) if (&User-Name =~ /\\.$/) -> FALSE (9) if (&User-Name =~ /(a)\\./) (9) if (&User-Name =~ /(a)\\./) -> FALSE (9) } # filter_username filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix : Checking for suffix after "@" (9) suffix : No '@' in User-Name = "newuser", looking up realm NULL (9) suffix : No such realm "NULL" (9) [suffix] = noop (9) eap : Peer sent code Response (2) ID 9 length 43 (9) eap : Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = EAP (9) # Executing group from file /etc/raddb/sites-enabled/default (9) authenticate { (9) eap : Expiring EAP session with state 0x0e90273006993e66 (9) eap : Finished EAP session with state 0x0e90273006993e66 (9) eap : Previous EAP request found for state 0x0e90273006993e66, released from the list (9) eap : Peer sent method PEAP (25) (9) eap : EAP PEAP (25) (9) eap : Calling eap_peap to process EAP data (9) eap_peap : processing EAP-TLS (9) eap_peap : eaptls_verify returned 7 (9) eap_peap : Done initial handshake (9) eap_peap : eaptls_process returned 7 (9) eap_peap : FR_TLS_OK (9) eap_peap : Session established. Decoding tunneled attributes (9) eap_peap : Peap state send tlv success (9) eap_peap : Received EAP-TLV response (9) eap_peap : Success (9) eap_peap : Using saved attributes from the original Access-Accept User-Name = 'newuser' (9) eap_peap : Saving session 48fd8119fa32c7cb48b60449437ed3f1edad01e5ff81191e7be8d62b3e5f17c4 vps 0x7f6012aedf20 in the cache (9) eap : Freeing handler (9) [eap] = ok (9) } # authenticate = ok (9) # Executing section post-auth from file /etc/raddb/sites-enabled/default (9) post-auth { (9) ldap : EXPAND . (9) ldap : --> . (9) ldap : EXPAND Authenticated at %S (9) ldap : --> Authenticated at 2015-07-03 14:28:14 rlm_ldap (ldap): Reserved connection (2) (9) ldap : EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (9) ldap : --> (uid=newuser) (9) ldap : EXPAND dc=test,dc=ad,dc=com (9) ldap : --> dc=test,dc=ad,dc=com (9) ldap : Performing search in 'dc=test,dc=ad,dc=com' with filter '(uid=newuser)', scope 'sub' (9) ldap : Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap:// ForestDnsZones.test.ad.com/DC=ForestDnsZones,DC=test,DC=ad,DC=com rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap:// DomainDnsZones.test.ad.com/DC=DomainDnsZones,DC=test,DC=ad,DC=com rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap:// test.ad.com/CN=Configuration,DC=test,DC=ad,DC=com rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (9) ldap : Search returned no results rlm_ldap (ldap): Deleting connection (2) (9) [ldap] = notfound (9) if (LDAP-Group == "cn=computers,cn=Users,dc=test,dc=ad,dc=com") (9) Searching for user in group "cn=computers,cn=Users,dc=test,dc=ad,dc=com" rlm_ldap (ldap): Reserved connection (1) (9) EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (9) --> (uid=newuser) (9) EXPAND dc=test,dc=ad,dc=com (9) --> dc=test,dc=ad,dc=com (9) Performing search in 'dc=test,dc=ad,dc=com' with filter '(uid=newuser)', scope 'sub' (9) Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap:// ForestDnsZones.test.ad.com/DC=ForestDnsZones,DC=test,DC=ad,DC=com rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap:// DomainDnsZones.test.ad.com/DC=DomainDnsZones,DC=test,DC=ad,DC=com rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap:// test.ad.com/CN=Configuration,DC=test,DC=ad,DC=com rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (9) Search returned no results rlm_ldap (ldap): Deleting connection (1) (9) if (LDAP-Group == "cn=computers,cn=Users,dc=test,dc=ad,dc=com") -> FALSE (9) [exec] = noop (9) remove_reply_message_if_eap remove_reply_message_if_eap { (9) if (&reply:EAP-Message && &reply:Reply-Message) (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (9) else else { (9) [noop] = noop (9) } # else else = noop (9) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop (9) } # post-auth = noop (9) Sending Access-Accept packet to host 192.168.0.2 port 1812, id=191, length=0 (9) User-Name = 'newuser' (9) MS-MPPE-Recv-Key = 0x770d0af8f17ddb90ae45050890e77a2f1284a252cb8a2dea9126d6e3ad90bda2 (9) MS-MPPE-Send-Key = 0x71f8b9b7a8aa1a90922d6043ad069e7e436ef4cce627dbd2c2e6bea252154cce (9) EAP-MSK = 0x770d0af8f17ddb90ae45050890e77a2f1284a252cb8a2dea9126d6e3ad90bda271f8b9b7a8aa1a90922d6043ad069e7e436ef4cce627dbd2c2e6bea252154cce (9) EAP-EMSK = 0x1b54d22a41027762199d0673d2024afb9b75034f4486286e1ce600f42266b87c01bf8b7801e44f136c405e7098f74a39062c8d0fd8199ad362af3aa3fd939603 (9) EAP-Session-Id = 0x19559664033b1b4862038b2d1367a8d5b31031ef49921dca1e46e5720f5b2fa8f355967fdd334b8b93e13aaba983cf708cc59b52a195fa942852b7eb85c9e6b313 (9) EAP-Message = 0x03090004 (9) Message-Authenticator = 0x00000000000000000000000000000000 Sending Access-Accept Id 191 from 192.168.0.10:1812 to 192.168.0.2:1812 User-Name = 'newuser' MS-MPPE-Recv-Key = 0x770d0af8f17ddb90ae45050890e77a2f1284a252cb8a2dea9126d6e3ad90bda2 MS-MPPE-Send-Key = 0x71f8b9b7a8aa1a90922d6043ad069e7e436ef4cce627dbd2c2e6bea252154cce EAP-Message = 0x03090004 Message-Authenticator = 0x00000000000000000000000000000000 (9) Finished request in ldap config file, part related user and groups looks like below: user { base_dn = "dc=test,dc=ad,dc=com" filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" } group { base_dn ="dc=test,dc=ad,dc=com" filter = "(objectClass=posixGroup)" name_attribute = cn membership_filter = "(|(member=%{control:Ldap-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))" membership_attribute = "memberOf" } Why freeradius can't match group "computers" to user "newuser"? I would be very glad on any help

2 1

Proxy Access and Acounting Request
by Shurbann Martes 03 Jul '15

03 Jul '15

Hello, I'm using FreeRADIUS Version 2.2.7, for host x86_64-pc-linux-gnu, built on Jul 1 2015 at 06:19:40 My goal is to proxy Access and Accounting Request to another RADIUS server. My Problem is I'm not able to proxy the Access and Accounting Request. Instead I do see the following logs: Ready to process requests. rad_recv: Access-Request packet from host 192.168.134.24 port 51123, id=2, length=130 Called-Station-Id = "test.example.com" Calling-Station-Id = "1234567890" User-Name = "test(a)example.com" User-Password = "test" 3GPP-SGSN-MCC-MNC = "74602" 3GPP-SGSN-Address = 190.98.125.65 Message-Authenticator = 0x86458de919d5aa8d628f2a051ba6caf8 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Looking up realm "example.com" for User-Name = "test(a)example.com" [suffix] Found realm "example.com" [suffix] Adding Stripped-User-Name = "test" [suffix] Adding Realm = "example.com" [suffix] Proxying request from user test to realm example.com [suffix] Preparing to proxy authentication request to realm "example.com" ++[suffix] = updated [eap] No EAP-Message, not doing EAP ++[eap] = noop [files] users: Matched entry test at line 61 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = noop +} # group authorize = updated There was no response configured: rejecting request 1 Using Post-Auth-Type Reject # Executing group from file /etc/freeradius/sites-enabled/default +group REJECT { [attr_filter.access_reject] expand: %{User-Name} -> test(a)example.com attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] = updated +} # group REJECT = updated Delaying reject of request 1 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 1 Sending Access-Reject of id 2 to 192.168.134.24 port 51123 Waking up in 4.9 seconds. Cleaning up request 1 ID 2 with timestamp +99 Ready to process requests. A you can see there is no "Proxying request 0 to home server" in the log, but instead I see this "There was no response configured: rejecting request 1" I'm out of idea and was hoping you can help me out. Find below the configuration files, I think that are relevant: proxy.conf: proxy server { default_fallback = no } home_server localhost { type = auth+acct ipaddr = 192.168.146.133 port = 1645 secret = test123 require_message_authenticator = yes response_window = 20 zombie_period = 40 revive_interval = 120 status_check = status-server check_interval = 30 num_answers_to_alive = 3 max_outstanding = 65536 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } sites-enabled/default authorize { preprocess chap mschap digest suffix eap { ok = return } files expiration logintime pap } authenticate { Auth-Type PAP { pap } Auth-Type CHAP { chap } Auth-Type MS-CHAP { mschap } digest unix eap Auth-Type Perl { perl } } preacct { preprocess acct_unique suffix files } accounting { detail sqlippool exec attr_filter.accounting_response perl } session { radutmp } post-auth { sqlippool exec Post-Auth-Type REJECT { attr_filter.access_reject } } pre-proxy { } post-proxy { eap } Hope to have gave you the necessary information the right way, so that you can help me. Thank you. Regards, S. Martes

3 5

Re: LDAP search failed
by Hatim CHIKHI 03 Jul '15

03 Jul '15

Hi arr2036, Thanks for your reply. When I issue an ldap search I get many information about the user I'm looking for but I'm not sure if the search is successful: # search result search: 2 result: 0 Success # numResponses: 8 # numEntries: 1 # numReferences: 6 In the radius logs, this time I'm getting this error: [ldap] performing user authorization for hatim [ldap] expand: sAMAccountName=3D%{User-Name} -> sAMAccountName=3Dhatim [ldap] expand: dc=3Dad,dc=3D****,dc=3Dfr -> dc=3Dad,dc=3D****,dc=3Dfr [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to myserver:389, authentication 0 [ldap] bind as cn=3DLinOTP-Auth,ou=3DAD-Man,ou=3DRessources,dc=3Dad,dc=3D****,dc=3Dfr/****= **** to myserver:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in dc=3Dad,dc=3D****,dc=3Dfr, with filter sAMAccountName=3Dhatim [ldap] rebind to URL ldap://***** [ldap] rebind to URL ldap://***** [ldap] rebind to URL ldap://***** [ldap] no uid attribute - access denied by default [ldap] ldap_release_conn: Release Id: 0 ++[ldap] =3D userlock Is it an ldapsearch problem? Thanks for your help! 2015-07-03 12:52 GMT+02:00 Hatim CHIKHI <hatim.networking(a)gmail.com>: > Hi arr2036, > > Thanks for your reply. > > When I issue an ldap search I get many information about the user I'm > looking for but I'm not sure if the search is successful: > > # search result > search: 2 > result: 0 Success > > # numResponses: 8 > # numEntries: 1 > # numReferences: 6 > > > > In the radius logs, this time I'm getting this error: > > [ldap] performing user authorization for hatim > [ldap] expand: sAMAccountName=%{User-Name} -> sAMAccountName=hatim > [ldap] expand: dc=ad,dc=****,dc=fr -> dc=ad,dc=****,dc=fr > [ldap] ldap_get_conn: Checking Id: 0 > [ldap] ldap_get_conn: Got Id: 0 > [ldap] attempting LDAP reconnection > [ldap] (re)connect to myserver:389, authentication 0 > [ldap] bind as > cn=LinOTP-Auth,ou=AD-Man,ou=Ressources,dc=ad,dc=****,dc=fr/******** to > myserver:389 > [ldap] waiting for bind result ... > [ldap] Bind was successful > [ldap] performing search in dc=ad,dc=****,dc=fr, with filter > sAMAccountName=hatim > [ldap] rebind to URL ldap://***** > [ldap] rebind to URL ldap://***** > [ldap] rebind to URL ldap://***** > [ldap] no uid attribute - access denied by default > [ldap] ldap_release_conn: Release Id: 0 > ++[ldap] = userlock > > > Is it an ldapsearch problem? > > > Thanks for your help! > > > > > > 2015-07-02 17:51 GMT+02:00 arr2036 [via FreeRADIUS] < > ml-node+s1045715n5735089h90(a)n5.nabble.com>: > >> >> > On 2 Jul 2015, at 11:46, Hatim CHIKHI <[hidden email] >> <http:///user/SendEmail.jtp?type=node&node=5735089&i=0>> wrote: >> > >> > Now, when I add password = "****" to the ldap config I get this error >> > instead: >> > >> > [ldap] waiting for bind result ... >> > [ldap] Bind was successful >> > [ldap] performing search in dc=ad,dc=domain,dc=fr, with filter >> > sAMAccountName=hatim >> > [ldap] ldap_search() failed: Timed out while waiting for server to >> > respond. Please increase the timeout. >> > [ldap] ldap_release_conn: Release Id: 0 >> > ++[ldap] = fail >> Likely hopping around the AD forrest and timing out. >> >> Use ldapsearch to repeat the search and check the results. >> >> If it times out as well then that's your issue. Fix AD. >> >> If not, then compare the wireshark captures to see what's different >> between the two searches. >> >> If you think rlm_ldap is doing something wrong, upgrade to v3.0.8, and >> state what you think it should do different. >> >> -Arran >> >> >> > >> > I increased the timeout but in vain!! >> > >> > 2015-07-02 17:29 GMT+02:00 Hatim CHIKHI <[hidden email] >> <http:///user/SendEmail.jtp?type=node&node=5735089&i=1>>: >> > >> >> Thanks guys for your reply. >> >> >> >> I upgraded to freeradius 2.2.7 but I still have the same problem. >> >> >> >> If it is not a version issue, what whould be the cause of the problem? >> >> >> >> >> >> 2015-07-02 13:07 GMT+02:00 Alan DeKok <[hidden email] >> <http:///user/SendEmail.jtp?type=node&node=5735089&i=2>>: >> >> >> >>> On Jul 2, 2015, at 5:31 AM, Hatim CHIKHI <[hidden email] >> <http:///user/SendEmail.jtp?type=node&node=5735089&i=3>> >> >>> wrote: >> >>>> I'm using freeRaduis version 2.1.12+dfsg-1.2. >> >>> >> >>> You should upgrade. >> >>> >> >>>> I'm trying to get some parameters from an AD server but I have >> problems >> >>>> with the search filter. >> >>>> ... >> >>>> [ldap] ldap_search() failed: Operations error >> >>> >> >>> This is fixed (and documented) in later versions of the server. >> >>> Install 2.2.7. >> >>> >> >>> Alan DeKok. >> >>> >> >>> >> >>> - >> >>> List info/subscribe/unsubscribe? See >> >>> http://www.freeradius.org/list/users.html >> >>> >> >> >> >> >> > - >> > List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html >> Arran Cudbard-Bell <[hidden email] >> <http:///user/SendEmail.jtp?type=node&node=5735089&i=4>> >> FreeRADIUS development team >> >> FD31 3077 42EC 7FCD 32FE 5EE2 56CF 27F9 30A8 CAA2 >> >> >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html >> >> *signature.asc* (890 bytes) Download Attachment >> <http://freeradius.1045715.n5.nabble.com/attachment/5735089/0/signature.asc> >> >> >> ------------------------------ >> If you reply to this email, your message will be added to the >> discussion below: >> >> http://freeradius.1045715.n5.nabble.com/LDAP-search-failed-tp5735079p573508… >> To unsubscribe from FreeRADIUS, click here >> <http://freeradius.1045715.n5.nabble.com/template/NamlServlet.jtp?macro=unsu…> >> . >> NAML >> <http://freeradius.1045715.n5.nabble.com/template/NamlServlet.jtp?macro=macr…> >> > >

3 2

Acess reject dropped by freeradius
by sai ram 03 Jul '15

03 Jul '15

Hi, I am using freeradius 2.2.1 Whenever I use wrong credentials, NAS sends access reject. Access reject packet is received when I do a packet capture. But freeradius doesn't acknowledge access reject the same way it does for access accept. I changed reject_delay parameter to 0. But I still don't receive the access reject from freeradius. So every time wrong credentials is entered, I get time out instead of access reject. Is there some other configuration is need to change ? Regards, Sairam

2 3

Support for connect_timeout in PQconnectdb()
by Kyle Birkeland 02 Jul '15

02 Jul '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hello, I'm trying to use a postgresql database in a redundant block on v3.0.8 like so: redundant { pgsql detail ok } Unfortunately, whenever a request hits this part of the config, it hangs for over 120 seconds waiting for the connection to set up before moving down the redundant block. PQconnectdb() does have a connect_timeout option to configure how long the function will wait before returning an error, but I don't see a way to configure this in FR. mod_instantiate() in rlm_sql_postgresql.c looks like it only supports the dbname, host, port, user, password, and application_name. Would it be possible to get a patch that will add a connect_timeout option to the rlm_sql_postgresql config? It would be greatly appreciated. Thanks, Kyle -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQEcBAEBCAAGBQJVktkHAAoJEBZxgM7w3gB17ckIANbugIy+HW/jH4wo6lLkKigf xRW0nUXZ05P3+E4N3B8GWnpVokK5tAIiX7LhYBTTlrLzpKbOAQRr1EMfEzvQW4Ij kj5QFGtnZ/18dnz8MAYWYrOnkvzg6ym53ks4rNOEhUhpsp6B6P23lwCp24jT7MYV MGmbuJieQV9Dz8MePEbRzeDrfCt8qE3DLKotOjSjgf62+H1jL1fQlpjF96QO/6nF AV4BVLXba/AsQNbCh6fWlKljtTEPnjfI1RzBgzlvVoC3AX8BVu0dCuMYI7Rw8rSe ZPne+iQ80/ycM6zU6ux86kKsTfmeQvgZM+TIS5aCZLsoxibZEvgJciswBhT3kkU= =xp7I -----END PGP SIGNATURE-----

3 3

CentOS 7.1 FreeRadius V3.0.8
by Kris Armstrong 02 Jul '15

02 Jul '15

i originally installed CentOS 7.1 with FreeRadius V3.0.4. I then upgraded to V3.0.8 and am receiving the the below message. The application and the module numbers do not match. I don’t know how to correct this? /etc/raddb/mods-enabled/always[35]: Application and rlm_always magic number (version) mismatch. application: 30008 module: 30004

4 4

Request throttling
by srithar jeevadurai 02 Jul '15

02 Jul '15

Dear Friends, Can we do throttling of no of request in process queue at freeRadius? FreeRadius is depending on mysql, if mysql db connectivity is down for some time then GGSN will feed freeRadius. Radius server may run into the 'child hung' issue then we need to restart freeRadius. To avoid child hung and restart of system. Can we do following? 1) Apply a cap on freeRadius processing queue i.e. if backlog on processing queue is more than 50000 request then reject requests further request until it comes down less than 50000. It will avoid child hung issue. My understanding on child hung: 1) If backlog is more in processing queue then it will spend time on processing head of the queue. 2) messages are reaching age limit of unattended age limit at tail of the queue. 3) Due to that child hung is happening. -- Regards, Srithar Durairaj Alternate Mail I.D: srijeevadurai1(a)yahoo.co.in Mobile: +919886251852

3 4

Migrating to a new server from 2.x to 3.0.4 CentOS 7
by Kris Armstrong 02 Jul '15

02 Jul '15

Hi, I have migrated my root CA and free radius configs from FreeRadius 2.x to 3.0.4 on CentOS7. I’m receiving the following messages when attempting to authenticate the client with EAP/TLS. PEAP/MSCHPv2 works perfect. I have tried to recreate the ROOT CA and Client cert but that produces the same error message. I’m not sure where to go from here. (6) eap_tls : <<< TLS 1.0 Handshake [length 03d4], Certificate --> verify error:num=20:unable to get local issuer certificate (6) ERROR: eap_tls : SSL says error 20 : unable to get local issuer certificate (6) eap_tls : >>> TLS 1.0 Alert [length 0002], fatal unknown_ca (6) ERROR: eap_tls : TLS Alert write:fatal:unknown CA tls: TLS_accept: Error in SSLv3 read client certificate B (6) ERROR: eap_tls : SSL says: error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned SSL: SSL_read failed in a system call (-1), TLS session fails. TLS receive handshake failed during operation (6) eap_tls : eaptls_process returned 4 (6) ERROR: eap : Failed continuing EAP TLS (13) session. EAP sub-module failed (6) eap : Failed in EAP select (6) [eap] = invalid (6) } # authenticate = invalid

3 15

ldapi:// with path
by Michael Ströder 02 Jul '15

02 Jul '15

HI! Testing git v3.1.x 36e1b02e926df5cd75d4d548694401535c607ca9 I noticed that something's wrong with LDAPI URLs containing a URL-encoded path. This does not work: server = 'ldapi://%2Ftmp%2Fopenldap-socket' leads to: rlm_ldap (ldap): Bind with uid=radiusd,ou=sys,dc=stroeder,dc=local to ldapi:///tmp/openldap-socket failed: Can't contact LDAP server I'm not sure whether radiusd URL-decodes the path and passes "ldapi:///tmp/openldap-socket" to libldap or whether the decoding simply happens when writing the log line. It should *not* do URL-decoding because parsing the LDAP URL "ldapi:///tmp/openldap-socket" in libldap won't work since the first "/" after the "hostport" part is the next separator to the DN portion. Ciao, Michael.

3 30

The radgroupreply parameters are not coming in response
by Randeep 02 Jul '15

02 Jul '15

Hi, We have updated our FreeRadius to 3.0.8. Initially we were usiong 2.1.12. But in this we are not getting the parameters in radgroupreply for the user's group. In logs it is showing merging in reply. But in reply those parameters are not showing. What can be the possible reason? [root@radius ~]# radtest randeeps randeeps localhost 0 testing123 Sent Access-Request Id 193 from 0.0.0.0:36043 to 127.0.0.1:1812 length 78 User-Name = 'randeeps' User-Password = 'randeeps' NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0x00 Cleartext-Password = 'randeeps' Received Access-Accept Id 193 from 127.0.0.1:1812 to 0.0.0.0:0 length 20 In debug: preply WHERE groupname = 'starter' ORDER BY id *Thu Jul 2 03:26:43 2015 : Debug: (0) sql: Group "starter": Merging reply items* Thu Jul 2 03:26:43 2015 : Debug: (0) sql: Framed-Protocol == PPP Thu Jul 2 03:26:43 2015 : Debug: (0) sql: Framed-MTU == 1500 Thu Jul 2 03:26:43 2015 : Debug: (0) sql: Framed-Routing == Broadcast-Listen Thu Jul 2 03:26:43 2015 : Debug: (0) sql: Framed-Compression == Van-Jacobson-TCP-IP Thu Jul 2 03:26:43 2015 : Debug: (0) sql: Service-Type == Framed-User Thu Jul 2 03:26:43 2015 : Debug: (0) sql: Idle-Timeout == 300 Thu Jul 2 03:26:43 2015 : Debug: (0) sql: Acct-Interim-Interval == 60 Thu Jul 2 03:26:43 2015 : Debug: (0) sql: Mikrotik-Rate-Limit == '4096k/4096k' Thu Jul 2 03:26:43 2015 : Debug: (0) sql: SQL query returned: success Thu Jul 2 03:26:43 2015 : Debug: (0) sql: 1 record(s) updated Thu Jul 2 03:26:43 2015 : Debug: rlm_sql (sql): Released connection (4) Thu Jul 2 03:26:43 2015 : Debug: (0) modsingle[post-auth]: returned from sql (rlm_sql) for request 0 Thu Jul 2 03:26:43 2015 : Debug: (0) [sql] = ok Thu Jul 2 03:26:43 2015 : Debug: (0) modsingle[post-auth]: calling exec (rlm_exec) for request 0 Thu Jul 2 03:26:43 2015 : Debug: (0) modsingle[post-auth]: returned from exec (rlm_exec) for request 0 Thu Jul 2 03:26:43 2015 : Debug: (0) [exec] = noop Thu Jul 2 03:26:43 2015 : Debug: (0) policy remove_reply_message_if_eap { Thu Jul 2 03:26:43 2015 : Debug: (0) if (&reply:EAP-Message && &reply:Reply-Message) { Thu Jul 2 03:26:43 2015 : Debug: (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE Thu Jul 2 03:26:43 2015 : Debug: (0) else { Thu Jul 2 03:26:43 2015 : Debug: (0) modsingle[post-auth]: calling noop (rlm_always) for request 0 Thu Jul 2 03:26:43 2015 : Debug: (0) modsingle[post-auth]: returned from noop (rlm_always) for request 0 Thu Jul 2 03:26:43 2015 : Debug: (0) [noop] = noop Thu Jul 2 03:26:43 2015 : Debug: (0) } # else = noop Thu Jul 2 03:26:43 2015 : Debug: (0) } # policy remove_reply_message_if_eap = noop Thu Jul 2 03:26:43 2015 : Debug: (0) } # post-auth = ok *Thu Jul 2 03:26:43 2015 : Debug: (0) Sent Access-Accept Id 193 from 127.0.0.1:1812 <http://127.0.0.1:1812> to 127.0.0.1:36043 <http://127.0.0.1:36043> length 0* Thu Jul 2 03:26:43 2015 : Debug: (0) Finished request Thu Jul 2 03:26:43 2015 : Debug: Waking up in 4.9 seconds. Thu Jul 2 03:26:48 2015 : Debug: (0) <done>: Cleaning up request packet ID 193 with timestamp +6 Thu Jul 2 03:26:48 2015 : Info: Ready to process requests But when I uncomment user steve in users file, all the parameters are coming in reply. Please help. -- Randeep Mob: +919447831699[kerala] Mob: +919880050349[B'lore] http://twitter.com/Randeeppr http://in.linkedin.com/in/randeeppr [image: --] Randeep Raman [image: http://]about.me/Randeeppr <http://about.me/Randeeppr>

2 2