- Freeradius-Users - lists.freeradius.org

FreeRadius PAP authentication for Non-EAPOL clients on Avaya 5500 switch.
by jan hugo prins 02 Mar '15

02 Mar '15

Hello, We have been running our radius servers for some time now and they work just fine authenticating our wireless users against our LDAP tree etc. Now my management has asked me to spend some time setting up radius authentication for wired outleds in the office, and for the workstations I got it working rather quickly using EAP-TLS and certificates signed by the same CA that signed the radius certificate. But I also need to accommodate telephones and printers and they don't do EAP themselves. To work around this, the switches we use have an option to configure the switch in such a way that it creates a radius access request based on the MAC address of the client, it's own IP address and the port the client is connected to. You then have to add this information to the users file of the radius server and you should be able to authenticate the device and open the port. This sounds like a simple setup, just add some users with plaintext passwords and start the authentication process. But the problem is that this fails, and it looks like the switch is sending 2 exactly the same authentication requests short after another, and the first one succeeds, but the second one fails. I also see this when I ping the host, I receive one reply and after that the port is closed again. Could someone tell me if I have something wrong in my config? Thanks a lot. Jan Hugo Prins Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/dynamic_clients including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/opendirectory including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/Compagny1 including configuration file /etc/raddb/sites-enabled/Compagny1-tunnel main { user = "radiusd" group = "radiusd" allow_core_dumps = no } including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } realm Compagny1.com { nostrip } realm bedrijf2.nl { nostrip } realm bedrijf3.nl { nostrip } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "xxxxxxxxxxxxxxxxx" nastype = "other" } client aruba01 { ipaddr = 172.30.20.47 require_message_authenticator = no secret = "xxxxxxxxxxxxxxxxxxx" nastype = "other" } client pppoe { ipaddr = 172.30.20.48 require_message_authenticator = no secret = "xxxxxxxxxxxxxxxxx" nastype = "other" } client radius01 { ipaddr = 172.30.20.16 require_message_authenticator = no secret = "xxxxxxxxxxxxxxxx" nastype = "other" } client radius02 { ipaddr = 172.30.20.17 require_message_authenticator = no secret = "xxxxxxxxxxxxxxxxx" nastype = "other" } client infranode01 { ipaddr = 172.30.20.52 require_message_authenticator = no secret = "axxxxxxxxxxxxxx" nastype = "other" } client infranode02 { ipaddr = 172.30.20.53 require_message_authenticator = no secret = "xxxxxxxxxxxxxxxxxxx" nastype = "other" } client tc03st01sw1 { ipaddr = 192.168.202.41 require_message_authenticator = no secret = "xxxxxxxxxxxxxxxxxx" nastype = "other" } client tc03st02sw1 { ipaddr = 192.168.202.61 require_message_authenticator = no secret = "nortel" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel-Compagny1 { # from file /etc/raddb/sites-enabled/Compagny1-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/raddb/modules/unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap_Compagny1" from file /etc/raddb/eap.conf eap eap_Compagny1 { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no check_cert_cn = "%{User-Name}" cipher_list = "DEFAULT" cache { enable = no lifetime = 24 max_entries = 255 } verify { } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel-Compagny1" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel-Compagny1" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Loading virtual module optional_realm Module: Linked to module rlm_always Module: Instantiating module "updated" from file /etc/raddb/modules/always always updated { rcode = "updated" simulcount = 0 mpp = no } Module: Instantiating module "notfound" from file /etc/raddb/modules/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/raddb/modules/files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Linked to module rlm_ldap Module: Instantiating module "ldap_Compagny1" from file /etc/raddb/modules/ldap ldap ldap_Compagny1 { server = "ldap.svc.be.nl" port = 389 password = "" identity = "" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "ou=bedrijf1,dc=Compagny1,dc=com" filter = "(mailLocalAddress=%{User-Name})" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(&(objectClass=posixGroup)(memberUid=%{Stripped-User-Name}))" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Creating new attribute ldap_Compagny1-Ldap-Group rlm_ldap: Registering ldap_groupcmp for ldap_Compagny1-Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap_Compagny1 rlm_ldap: Over-riding set_auth_type, as there is no module ldap_Compagny1 listed in the "authenticate" section. rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x1ee5b30 Module: Instantiating module "ldap_bedrijf2" from file /etc/raddb/modules/ldap ldap ldap_bedrijf2 { server = "ldap.svc.be.nl" port = 389 password = "" identity = "" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "ou=bedrijf2,dc=Compagny1,dc=com" filter = "(mailLocalAddress=%{User-Name})" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(&(objectClass=posixGroup)(memberUid=%{Stripped-User-Name}))" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Creating new attribute ldap_bedrijf2-Ldap-Group rlm_ldap: Registering ldap_groupcmp for ldap_bedrijf2-Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap_bedrijf2 rlm_ldap: Over-riding set_auth_type, as there is no module ldap_bedrijf2 listed in the "authenticate" section. rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x1ee7840 Module: Instantiating module "ldap_bedrijf3" from file /etc/raddb/modules/ldap ldap ldap_bedrijf3 { server = "ldap.svc.be.nl" port = 389 password = "" identity = "" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "ou=bedrijf3,dc=Compagny1,dc=com" filter = "(mailLocalAddress=%{User-Name})" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(&(objectClass=posixGroup)(memberUid=%{Stripped-User-Name}))" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Creating new attribute ldap_bedrijf3-Ldap-Group rlm_ldap: Registering ldap_groupcmp for ldap_bedrijf3-Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap_bedrijf3 rlm_ldap: Over-riding set_auth_type, as there is no module ldap_bedrijf3 listed in the "authenticate" section. rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x1ee9630 Module: Loading virtual module real_id Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking pre-proxy {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "pre_proxy_log" from file /etc/raddb/modules/detail.log detail pre_proxy_log { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/pre-proxy-detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Checking post-proxy {...} for more modules to load Module: Instantiating module "post_proxy_log" from file /etc/raddb/modules/detail.log detail post_proxy_log { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/post-proxy-detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Checking post-auth {...} for more modules to load Module: Instantiating module "reply_log" from file /etc/raddb/modules/detail.log detail reply_log { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/raddb/modules/digest Module: Checking authorize {...} for more modules to load Module: Loading virtual module optional_realm Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/raddb/modules/preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Instantiating module "auth_log" from file /etc/raddb/modules/detail.log detail auth_log { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Instantiating module "detail" from file /etc/raddb/modules/detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking pre-proxy {...} for more modules to load Module: Loading virtual module allow_only_Compagny1 Module: Instantiating module "reject" from file /etc/raddb/modules/always always reject { rcode = "reject" simulcount = 0 mpp = no } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel-Compagny1 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.202.61 port 3490, id=203, length=86 NAS-IP-Address = 192.168.202.61 User-Password = "192168202061.78acc0788222.0003" Service-Type = Login-User NAS-Port = 3 User-Name = "78acc0788222" # Executing section authorize from file /etc/raddb/sites-enabled/Compagny1 +- entering group authorize {...} ++- entering policy optional_realm {...} +++? if (User-Name =~ /(.+)(a)(.+)/) ? Evaluating (User-Name =~ /(.+)(a)(.+)/) -> FALSE +++? if (User-Name =~ /(.+)(a)(.+)/) -> FALSE +++- entering else else {...} ++++[notfound] returns notfound +++- else else returns notfound ++- policy optional_realm returns notfound ++[preprocess] returns ok [auth_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/192.168.202.61/auth-detail-20150226 [auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/192.168.202.61/auth-detail-20150226 [auth_log] expand: %t -> Thu Feb 26 01:08:14 2015 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "78acc0788222", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap_Compagny1] No EAP-Message, not doing EAP ++[eap_Compagny1] returns noop [ldap_Compagny1] Entering ldap_groupcmp() [files] expand: ou=bedrijf1,dc=Compagny1,dc=com -> ou=bedrijf1,dc=Compagny1,dc=com [files] expand: (mailLocalAddress=%{User-Name}) -> (mailLocalAddress=78acc0788222) [ldap_Compagny1] ldap_get_conn: Checking Id: 0 [ldap_Compagny1] ldap_get_conn: Got Id: 0 [ldap_Compagny1] attempting LDAP reconnection [ldap_Compagny1] (re)connect to ldap.svc.be.nl:389, authentication 0 [ldap_Compagny1] bind as / to ldap.svc.be.nl:389 [ldap_Compagny1] waiting for bind result ... [ldap_Compagny1] Bind was successful [ldap_Compagny1] performing search in ou=bedrijf1,dc=Compagny1,dc=com, with filter (mailLocalAddress=78acc0788222) [ldap_Compagny1] object not found rlm_ldap::ldap_groupcmp: search failed [ldap_Compagny1] ldap_release_conn: Release Id: 0 [ldap_Compagny1] Entering ldap_groupcmp() [files] expand: ou=bedrijf1,dc=Compagny1,dc=com -> ou=bedrijf1,dc=Compagny1,dc=com [files] expand: (mailLocalAddress=%{User-Name}) -> (mailLocalAddress=78acc0788222) [ldap_Compagny1] ldap_get_conn: Checking Id: 0 [ldap_Compagny1] ldap_get_conn: Got Id: 0 [ldap_Compagny1] performing search in ou=bedrijf1,dc=Compagny1,dc=com, with filter (mailLocalAddress=78acc0788222) [ldap_Compagny1] object not found rlm_ldap::ldap_groupcmp: search failed [ldap_Compagny1] ldap_release_conn: Release Id: 0 [ldap_bedrijf2] Entering ldap_groupcmp() [files] expand: ou=bedrijf2,dc=Compagny1,dc=com -> ou=bedrijf2,dc=Compagny1,dc=com [files] expand: (mailLocalAddress=%{User-Name}) -> (mailLocalAddress=78acc0788222) [ldap_bedrijf2] ldap_get_conn: Checking Id: 0 [ldap_bedrijf2] ldap_get_conn: Got Id: 0 [ldap_bedrijf2] attempting LDAP reconnection [ldap_bedrijf2] (re)connect to ldap.svc.be.nl:389, authentication 0 [ldap_bedrijf2] bind as / to ldap.svc.be.nl:389 [ldap_bedrijf2] waiting for bind result ... [ldap_bedrijf2] Bind was successful [ldap_bedrijf2] performing search in ou=bedrijf2,dc=Compagny1,dc=com, with filter (mailLocalAddress=78acc0788222) [ldap_bedrijf2] object not found rlm_ldap::ldap_groupcmp: search failed [ldap_bedrijf2] ldap_release_conn: Release Id: 0 [ldap_bedrijf3] Entering ldap_groupcmp() [files] expand: ou=bedrijf3,dc=Compagny1,dc=com -> ou=bedrijf3,dc=Compagny1,dc=com [files] expand: (mailLocalAddress=%{User-Name}) -> (mailLocalAddress=78acc0788222) [ldap_bedrijf3] ldap_get_conn: Checking Id: 0 [ldap_bedrijf3] ldap_get_conn: Got Id: 0 [ldap_bedrijf3] attempting LDAP reconnection [ldap_bedrijf3] (re)connect to ldap.svc.be.nl:389, authentication 0 [ldap_bedrijf3] bind as / to ldap.svc.be.nl:389 [ldap_bedrijf3] waiting for bind result ... [ldap_bedrijf3] Bind was successful [ldap_bedrijf3] performing search in ou=bedrijf3,dc=Compagny1,dc=com, with filter (mailLocalAddress=78acc0788222) [ldap_bedrijf3] object not found rlm_ldap::ldap_groupcmp: search failed [ldap_bedrijf3] ldap_release_conn: Release Id: 0 [ldap_Compagny1] Entering ldap_groupcmp() [files] expand: ou=bedrijf1,dc=Compagny1,dc=com -> ou=bedrijf1,dc=Compagny1,dc=com [files] expand: (mailLocalAddress=%{User-Name}) -> (mailLocalAddress=78acc0788222) [ldap_Compagny1] ldap_get_conn: Checking Id: 0 [ldap_Compagny1] ldap_get_conn: Got Id: 0 [ldap_Compagny1] performing search in ou=bedrijf1,dc=Compagny1,dc=com, with filter (mailLocalAddress=78acc0788222) [ldap_Compagny1] object not found rlm_ldap::ldap_groupcmp: search failed [ldap_Compagny1] ldap_release_conn: Release Id: 0 [files] users: Matched entry 78acc0788222 at line 24 ++[files] returns ok ++? if (Realm == "Compagny1.com" ) (Attribute Realm was not found) ? Evaluating (Realm == "Compagny1.com" ) -> FALSE ++? if (Realm == "Compagny1.com" ) -> FALSE ++? if (Realm == "bedrijf2.nl" ) (Attribute Realm was not found) ? Evaluating (Realm == "bedrijf2.nl" ) -> FALSE ++? if (Realm == "bedrijf2.nl" ) -> FALSE ++? if (Realm == "bedrijf3.nl" ) (Attribute Realm was not found) ? Evaluating (Realm == "bedrijf3.nl" ) -> FALSE ++? if (Realm == "bedrijf3.nl" ) -> FALSE ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns updated Found Auth-Type = PAP # Executing group from file /etc/raddb/sites-enabled/Compagny1 +- entering group PAP {...} ++[files] returns noop [pap] login attempt with password "192168202061.78acc0788222.0003" [pap] Using clear text password "192168202061.78acc0788222.0003" [pap] User authenticated successfully ++[pap] returns ok Login OK: [78acc0788222] (from client tc03st02sw1 port 3) # Executing section post-auth from file /etc/raddb/sites-enabled/Compagny1 +- entering group post-auth {...} [reply_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d -> /var/log/radius/radacct/192.168.202.61/reply-detail-20150226 [reply_log] /var/log/radius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d expands to /var/log/radius/radacct/192.168.202.61/reply-detail-20150226 [reply_log] expand: %t -> Thu Feb 26 01:08:14 2015 ++[reply_log] returns ok ++[exec] returns noop Sending Access-Accept of id 203 to 192.168.202.61 port 3490 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.202.61 port 3490, id=204, length=86 NAS-IP-Address = 192.168.202.61 User-Password = "192168202061.78acc0788220.0003" Service-Type = Login-User NAS-Port = 3 User-Name = "78acc0788220" # Executing section authorize from file /etc/raddb/sites-enabled/Compagny1 +- entering group authorize {...} ++- entering policy optional_realm {...} +++? if (User-Name =~ /(.+)(a)(.+)/) ? Evaluating (User-Name =~ /(.+)(a)(.+)/) -> FALSE +++? if (User-Name =~ /(.+)(a)(.+)/) -> FALSE +++- entering else else {...} ++++[notfound] returns notfound +++- else else returns notfound ++- policy optional_realm returns notfound ++[preprocess] returns ok [auth_log] expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/192.168.202.61/auth-detail-20150226 [auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/192.168.202.61/auth-detail-20150226 [auth_log] expand: %t -> Thu Feb 26 01:08:15 2015 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "78acc0788220", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap_Compagny1] No EAP-Message, not doing EAP ++[eap_Compagny1] returns noop [ldap_Compagny1] Entering ldap_groupcmp() [files] expand: ou=bedrijf1,dc=Compagny1,dc=com -> ou=bedrijf1,dc=Compagny1,dc=com [files] expand: (mailLocalAddress=%{User-Name}) -> (mailLocalAddress=78acc0788220) [ldap_Compagny1] ldap_get_conn: Checking Id: 0 [ldap_Compagny1] ldap_get_conn: Got Id: 0 [ldap_Compagny1] performing search in ou=bedrijf1,dc=Compagny1,dc=com, with filter (mailLocalAddress=78acc0788220) [ldap_Compagny1] object not found rlm_ldap::ldap_groupcmp: search failed [ldap_Compagny1] ldap_release_conn: Release Id: 0 [ldap_Compagny1] Entering ldap_groupcmp() [files] expand: ou=bedrijf1,dc=Compagny1,dc=com -> ou=bedrijf1,dc=Compagny1,dc=com [files] expand: (mailLocalAddress=%{User-Name}) -> (mailLocalAddress=78acc0788220) [ldap_Compagny1] ldap_get_conn: Checking Id: 0 [ldap_Compagny1] ldap_get_conn: Got Id: 0 [ldap_Compagny1] performing search in ou=bedrijf1,dc=Compagny1,dc=com, with filter (mailLocalAddress=78acc0788220) [ldap_Compagny1] object not found rlm_ldap::ldap_groupcmp: search failed [ldap_Compagny1] ldap_release_conn: Release Id: 0 [ldap_bedrijf2] Entering ldap_groupcmp() [files] expand: ou=bedrijf2,dc=Compagny1,dc=com -> ou=bedrijf2,dc=Compagny1,dc=com [files] expand: (mailLocalAddress=%{User-Name}) -> (mailLocalAddress=78acc0788220) [ldap_bedrijf2] ldap_get_conn: Checking Id: 0 [ldap_bedrijf2] ldap_get_conn: Got Id: 0 [ldap_bedrijf2] performing search in ou=bedrijf2,dc=Compagny1,dc=com, with filter (mailLocalAddress=78acc0788220) [ldap_bedrijf2] object not found rlm_ldap::ldap_groupcmp: search failed [ldap_bedrijf2] ldap_release_conn: Release Id: 0 [ldap_bedrijf3] Entering ldap_groupcmp() [files] expand: ou=bedrijf3,dc=Compagny1,dc=com -> ou=bedrijf3,dc=Compagny1,dc=com [files] expand: (mailLocalAddress=%{User-Name}) -> (mailLocalAddress=78acc0788220) [ldap_bedrijf3] ldap_get_conn: Checking Id: 0 [ldap_bedrijf3] ldap_get_conn: Got Id: 0 [ldap_bedrijf3] performing search in ou=bedrijf3,dc=Compagny1,dc=com, with filter (mailLocalAddress=78acc0788220) [ldap_bedrijf3] object not found rlm_ldap::ldap_groupcmp: search failed [ldap_bedrijf3] ldap_release_conn: Release Id: 0 [ldap_Compagny1] Entering ldap_groupcmp() [files] expand: ou=bedrijf1,dc=Compagny1,dc=com -> ou=bedrijf1,dc=Compagny1,dc=com [files] expand: (mailLocalAddress=%{User-Name}) -> (mailLocalAddress=78acc0788220) [ldap_Compagny1] ldap_get_conn: Checking Id: 0 [ldap_Compagny1] ldap_get_conn: Got Id: 0 [ldap_Compagny1] performing search in ou=bedrijf1,dc=Compagny1,dc=com, with filter (mailLocalAddress=78acc0788220) [ldap_Compagny1] object not found rlm_ldap::ldap_groupcmp: search failed [ldap_Compagny1] ldap_release_conn: Release Id: 0 ++[files] returns noop ++? if (Realm == "Compagny1.com" ) (Attribute Realm was not found) ? Evaluating (Realm == "Compagny1.com" ) -> FALSE ++? if (Realm == "Compagny1.com" ) -> FALSE ++? if (Realm == "bedrijf2.nl" ) (Attribute Realm was not found) ? Evaluating (Realm == "bedrijf2.nl" ) -> FALSE ++? if (Realm == "bedrijf2.nl" ) -> FALSE ++? if (Realm == "bedrijf3.nl" ) (Attribute Realm was not found) ? Evaluating (Realm == "bedrijf3.nl" ) -> FALSE ++? if (Realm == "bedrijf3.nl" ) -> FALSE ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. Login incorrect: [78acc0788220] (from client tc03st02sw1 port 3) Using Post-Auth-Type Reject # Executing group from file /etc/raddb/sites-enabled/Compagny1 +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> 78acc0788220 attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 1 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 1 Sending Access-Reject of id 204 to 192.168.202.61 port 3490 Waking up in 3.3 seconds. Cleaning up request 0 ID 203 with timestamp +14 Waking up in 1.6 seconds. Cleaning up request 1 ID 204 with timestamp +15 Ready to process requests.

5 11

Re: Question about multiple sql databases!
by Haviaras Kostas 02 Mar '15

02 Mar '15

I create 3 new virtual servers, one for each database and it is working as I expect! Thanks!!!

1 0

Re: Question about multiple sql databases!
by Haviaras Kostas 02 Mar '15

02 Mar '15

Each database is for different company! I will change to have different username and passwords. Thanks for your quick responses.

3 2

Re: Question about multiple sql databases!
by Haviaras Kostas 02 Mar '15

02 Mar '15

If I create 3 different virtual servers, it will be a problem if I have the same username and password for the mysql databases? Thanks

2 1

Question about multiple sql databases!
by Haviaras Kostas 02 Mar '15

02 Mar '15

Hello, I have define three sql databases on the sql.conf and each database point to different database but they have the same username and password. Each of them I have added on the /sites-enabled/default instead of the sql. My problem, when I connect to one through the my NAS its connect simultaneously on the 3 databases. Even if the username is doesn't exist on the other 2. Here is my config: sql.conf: sql db1{ } sql db2{ } sql db3{ } default(replace each sql with the following three): db1 db2 db3 I have to create Realms? Or 3 differents virtual servers? Thanks

3 2

Adding custom SQL counter
by Lorenzo Milesi 01 Mar '15

01 Mar '15

Hi. I'm trying to create a custom counter which basically is the same as Max-Daily-Session but restricted to the current Called-Station-Id. I added this to sql/mysql/counter.conf: sqlcounter dailycounterlocation { counter-name = Daily-Session-Location-Time check-name = Max-Daily-Session-Location reply-name = Session-Timeout sqlmod-inst = sql key = User-Name reset = daily query = "SELECT SUM(acctsessiontime - \ GREATEST((%b - UNIX_TIMESTAMP(acctstarttime)), 0)) \ FROM radacct WHERE username = '${key}' AND \ (UNIX_TIMESTAMP(acctstarttime) + acctsessiontime > '%b') \ AND calledstationid = '%{Called-Station-Id}' " } then in sites-enabled/default: [...] authorize { dailycounterlocation { reject = 1 } if(reject){ update reply { Reply-Message := "You have reached your daily time limit from this location" } reject } } but it's not working at all... Compared to a Max-Daily-Session attribute, in the radius debug I see the value gets returned just after the group check query. Instead with my custom attribute the value is never returned, the check query returns null (when there's no previous activity in radacct) so the user can stay connected forever (for the first session, from the second on it works). What am I doing wrong? Why the default session timeout is not returned? thanks -- Lorenzo Milesi - lorenzo.milesi(a)yetopen.it YetOpen S.r.l. - http://www.yetopen.it/

2 2

VSA Processing embedded values
by Ben Gatewood 01 Mar '15

01 Mar '15

Hi All, I am processing Accounting records from a vendor who overloads VSA 255 to extend the range of available attributes. For instance, they may send something like this: VENDOR-Attr-255 = "272=Yes” Which really means VSA 272 = “Yes” I am struggling a bit to figure out how to process these effectively. I found rlm_attr_rewrite but I can’t see a way to make it split the string and drop the “272=“ part. Is there a way to do this in unlang at all or am I going to need to bring in rlm_python or similar? Thanks in Advance, Ben

5 21

Fwd: Failed to find "authorized_macs" in the "modules" section
by Ben Gartland 27 Feb '15

27 Feb '15

Hi all, This is to replicate a customer issue with MAC authentication failing from a Wi-Fi router, I'm setting up a lab as its hard getting access to their network. The Wi-Fi client is a device on a plane. I'm trying to set up MAC Authentication in FreeRADIUS, following the guide: http://wiki.freeradius.org/guide/Mac-Auth but it appears to be wrong or it's something I've got wrong. I have followed the instructions for plain MAC-Auth. Running fresh install of Fedora 3.17.4-301.fc21.i686 Installed FreeRADIUS Version 3.0.4 using yum Created raddb/policy.conf as it didnt exist. It is the same as in the wiki page. Next 'raddb/modules/file' did not exist, so I created it. The file contents are the same as in the wiki page. Moved onto 'raddb/authorized_macs' created the file and put in the known MAC address of the RADIUS supplicant (the device being authenticated). Finally, the 'raddb/sites-available/default' was modified and this is where it's not as clear. I've added this whole 'authorize' section to replace the existing section, the next section is the 'authenticate' section and this hasn't been modified. When I start 'radiusd -X' I see the following output, which shows the error: failed to find "authorized_macs" in the "modules" section I've been over loads of forum articles but cannot find the answer or any clues to what is causing the error. Only saw a handful of other people with similar issue, but not an actual fix. Here are the last lines with the error, full radiusd -X output below. # Loading authorize {...} /etc/raddb/sites-enabled/default[261]: Failed to find "authorized_macs" in the "modules" section. /etc/raddb/sites-enabled/default[254]: Errors parsing authorize section. Can anyone see what I have done wrong? Let me know if you need more info/debug. Thanks Ben [BenG@fedora raddb]$ su Password: [root@fedora raddb]# [root@fedora raddb]# radiusd -X radiusd: FreeRADIUS Version 3.0.4, for host i686-redhat-linux-gnu, built on Jan 19 2015 at 19:42:00 Copyright (C) 1999-2014 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/authorized_macs including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/expiration including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/control including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/authorized_macs including configuration file /etc/raddb/sites-enabled/default main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client WR44v2 { ipaddr = 192.168.51.1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } radiusd: #### Instantiating modules #### instantiate { } modules { # Loaded module rlm_exec # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_eap # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no mod_accounting_username_bug = no max_sessions = 1024 } # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = yes } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_method = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Loaded module rlm_realm # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_expr # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } # Loaded module rlm_dynamic_clients # Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_chap # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_dhcp # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_soh # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_mschap # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_pap # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_attr_filter # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Loaded module rlm_unpack # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Loaded module rlm_files # Instantiating module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" usersfile = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" compat = "cistron" } reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:87 Cistron compatibility checks for entry DEFAULT ... Changing 'Calling-Station-Id =' to 'Calling-Station-Id ==' [/etc/raddb/mods-config/files/authorize]:88 Cistron compatibility checks for entry DEFAULT ... Changing 'Calling-Station-Id =' to 'Calling-Station-Id ==' [/etc/raddb/mods-config/files/authorize]:91 Cistron compatibility checks for entry 5c0a5b1f449a ... [/etc/raddb/mods-config/files/authorize]:92 Cistron compatibility checks for entry 5c-0a-5b-1f-44-9a ... [/etc/raddb/mods-config/files/authorize]:94 Cistron compatibility checks for entry ben ... [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:202 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:87 Cistron compatibility checks for entry DEFAULT ... Changing 'Calling-Station-Id =' to 'Calling-Station-Id ==' [/etc/raddb/mods-config/files/authorize]:88 Cistron compatibility checks for entry DEFAULT ... Changing 'Calling-Station-Id =' to 'Calling-Station-Id ==' [/etc/raddb/mods-config/files/authorize]:91 Cistron compatibility checks for entry 5c0a5b1f449a ... [/etc/raddb/mods-config/files/authorize]:92 Cistron compatibility checks for entry 5c-0a-5b-1f-44-9a ... [/etc/raddb/mods-config/files/authorize]:94 Cistron compatibility checks for entry ben ... [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:202 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Loaded module rlm_radutmp # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_replicate # Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_linelog # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{Packet-Type}:-default}" } # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_digest # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_unix # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } # Loaded module rlm_logintime # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_utf8 # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_cache # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 16384 epoch = 0 add_stats = no } # Loaded module rlm_preprocess # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Loaded module rlm_passwd # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Loaded module rlm_always # Instantiating module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Instantiating module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Instantiating module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Instantiating module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Instantiating module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Instantiating module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_expiration # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel server default { # from file /etc/raddb/sites-enabled/default # Creating Auth-Type = digest # Loading authenticate {...} # Loading authorize {...} /etc/raddb/sites-enabled/default[261]: Failed to find "authorized_macs" in the "modules" section. /etc/raddb/sites-enabled/default[254]: Errors parsing authorize section. [root@fedora raddb]#

2 2

Re: Problem with config sql 3.0.7
by Haviaras Kostas 27 Feb '15

27 Feb '15

I just install the version which you point me to download and now I am getting this error: Copyright (C) 1999-2015 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/sqlcounter No such configuration item modules.sql.dialect /etc/freeradius/mods-enabled/sqlcounter[43]: Reference "${modules.sql.dialect}" not found /etc/freeradius/mods-enabled/sqlcounter[52]: Reference "${modconfdir}/sql/counter/${dialect}/${.:instance}.conf" points to a variable which has not been expanded. Errors reading or parsing /etc/freeradius/radiusd.conf Thanks

2 1

Can't start it say "Failed to create check attribute Max-Daily-Session"
by Metha S. 27 Feb '15

27 Feb '15

Why I started radius with “radius -X”. it show error below. I uses centos 7 and freeradius 3.0.1-6 install with yum /etc/raddb/mods-enabled/sqlcounter[41]: Failed to create check attribute Max-Daily-Session /etc/raddb/mods-enabled/sqlcounter[41]: Instantiation failed for module “dailycounter" thank you

2 1