- Freeradius-Users - lists.freeradius.org

Re: NAP with Freeradius
by Zulzig 14 Nov '14

14 Nov '14

accept my apologies Alan i didn't see your answer. you said: > You shouldn't do that. This should be a separate policy. i didn't understand your answer. I should create two policies. isn't it ? the first, in the goal to compare the last authentication and the last to update my radusergroup. thank a lot

2 1

Re: NAP with freeradius
by Zulzig 14 Nov '14

14 Nov '14

Hello Rui, in fact i would like to assign users in different vlan, with an automatic process. If the user's last session is superior à 5 days, mysql does the update of the radusergrouptable, it will change the user's groupname (A to B). At the resultat, freeradius will have to send to the nas a different radgroupreply (B parameters). I use a trigger for it. It works, but i found an issue. Freeradius send to the NAS the old values of the radgrouprely (A parameters). I will try to update ma version of freeradius and find some information about ulang. Thank a lot for your help

1 0

module return codes
by Travis Dimmig 14 Nov '14

14 Nov '14

I can't figure out how to get modules to return with the codes I want them too. I have (what I believe to be) a very simple policy for checking if a request looks like a MAC authentication request. I would like the policy module return to be able to indicate if the request looks like it's MAC authentication or not. I have a policy defined in policy.conf as follows: check.mac_authentication { if ( (Calling-Station-Id) && (User-Name) ) { if ( "%{User-Name}" =~ /^%{config:policy.mac-addr}$/i ) { update request { Tmp-String-0 := "%{tolower:%{1}%{2}%{3}%{4}%{5}%{6}}" } } if ( "%{Calling-Station-Id}" =~ /^%{config:policy.mac-addr}$/i ) { update request { Tmp-String-1 := "%{tolower:%{1}%{2}%{3}%{4}%{5}%{6}}" } } } if ( (Tmp-String-0) && (Tmp-String-1) && "%{Tmp-String-0}" == "%{Tmp-String-1}" ) { ok } else { noop } } The goal is to return "ok" if both attributes exist, look like mac addresses, and have the same value (after being normalized to lower-case and having delimiters removed). Otherwise, it should return "noop". What is happening instead: +++- entering policy check.mac_authentication {...} ++++? if ((Calling-Station-Id) && (User-Name) ) ?? Evaluating (Calling-Station-Id) -> TRUE ?? Evaluating (User-Name) -> TRUE ++++? if ((Calling-Station-Id) && (User-Name) ) -> TRUE ++++- entering if ((Calling-Station-Id) && (User-Name) ) {...} +++++? if ("%{User-Name}" =~ /^%{config:policy.mac-addr}$/i ) expand: %{User-Name} -> 11bbccddeeff expand: policy.mac-addr -> policy.mac-addr expand: ^%{config:policy.mac-addr}$ -> ^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$ ? Evaluating ("%{User-Name}" =~ /^%{config:policy.mac-addr}$/i) -> TRUE +++++? if ("%{User-Name}" =~ /^%{config:policy.mac-addr}$/i ) -> TRUE +++++- entering if ("%{User-Name}" =~ /^%{config:policy.mac-addr}$/i ) {...} expand: %{1}%{2}%{3}%{4}%{5}%{6} -> 11bbccddeeff expand: %{tolower:%{1}%{2}%{3}%{4}%{5}%{6}} -> 11bbccddeeff ++++++[request] returns ok +++++- if ("%{User-Name}" =~ /^%{config:policy.mac-addr}$/i ) returns ok +++++? if ("%{Calling-Station-Id}" =~ /^%{config:policy.mac-addr}$/i ) expand: %{Calling-Station-Id} -> AA-BB-CC-DD-EE-FF expand: policy.mac-addr -> policy.mac-addr expand: ^%{config:policy.mac-addr}$ -> ^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$ ? Evaluating ("%{Calling-Station-Id}" =~ /^%{config:policy.mac-addr}$/i) -> TRUE +++++? if ("%{Calling-Station-Id}" =~ /^%{config:policy.mac-addr}$/i ) -> TRUE +++++- entering if ("%{Calling-Station-Id}" =~ /^%{config:policy.mac-addr}$/i ) {...} expand: %{1}%{2}%{3}%{4}%{5}%{6} -> AABBCCDDEEFF expand: %{tolower:%{1}%{2}%{3}%{4}%{5}%{6}} -> aabbccddeeff ++++++[request] returns ok +++++- if ("%{Calling-Station-Id}" =~ /^%{config:policy.mac-addr}$/i ) returns ok ++++- if ((Calling-Station-Id) && (User-Name) ) returns ok ++++? if ((Tmp-String-0) && (Tmp-String-1) && "%{Tmp-String-0}" == "%{Tmp-String-1}" ) ?? Evaluating (Tmp-String-0) -> TRUE ?? Evaluating (Tmp-String-1) -> TRUE expand: %{Tmp-String-0} -> 11bbccddeeff expand: %{Tmp-String-1} -> aabbccddeeff ? Evaluating ("%{Tmp-String-0}" == "%{Tmp-String-1}" ) -> FALSE ++++? if ((Tmp-String-0) && (Tmp-String-1) && "%{Tmp-String-0}" == "%{Tmp-String-1}" ) -> FALSE ++++- entering else else {...} +++++[noop] returns noop ++++- else else returns noop +++- policy check.mac_authentication returns ok When execution enters the final "else" with the noop, why does the module still return "ok" ? Any help will be greatly appreciated.... -Travis

2 1

Cisco Phones in users file
by Bilik.AA＠lsrgroup.ru 14 Nov '14

14 Nov '14

Hello everybody! I need to do kind of “universal transparent radius” without any external database for authentification both computers and Cisco-phones in voice vlan. I think there must be something in “users” file kind of: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ DEFAULT attr:= “it’s a some computer” Auth-Type := Accept DEFAULT attr:= “it’s a some Cisco-phone” Auth-Type := Accept Cisco-AVPair = "device-traffic-class=voice" ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ How do you think, is there some possibility to do this? Thank you. Alex Bilik С уважением, Александр Билик Инженер по информационной безопасности Группа управления коммуникациями Группа ЛСР E-mail: Bilik.AA(a)lsrgroup.ru<mailto:Bilik.AA@lsrgroup.ru> www.lsrgroup.ru [cid:image002.png@01D00029.668E3800]

2 1

NAP with freeradius
by Zulzig 14 Nov '14

14 Nov '14

Hello everybody ! I installed freeradius-server-2.1.12 with Mysql like a network access point. it works perfectly. I would like to improve my setup. somebody can to say me, if it is possible to use a function that allow me to add a condition based on the last authorization of the computer. for an example, if the last authorization is superior at X days, the computer will be on another vlan. On the mysql server, the radusergroup of the user is modified. Thank for your answer Zulzig

2 1

Re: Freeradius-Users Digest, Vol 115, Issue 42
by Rui Ribeiro 14 Nov '14

14 Nov '14

Hi Zulgig, You do not give much details and is difficult to give a more proper answer. Nevertheless, yes, a login with more than x time usage or bandwidth can be sent to another VLAN with unlang IF you are sending the accounting to a database. Migrate also to 2.2.5 or even better 3.x, 2.1.12 is very old and has known serious bugs. Regards, Rui Ribeiro -- Rui Ribeiro Senior Sysadm ISCTE-IUL https://www.linkedin.com/pub/rui-ribeiro/16/ab8/434 > Message: 2 > Date: Fri, 14 Nov 2014 11:44:35 +0100 > From: Zulzig <zulzig(a)gmail.com> > To: freeradius-users <freeradius-users(a)lists.freeradius.org> > Subject: NAP with freeradius > Message-ID: > < > CAKSwai+j8V4y8sVLXicudoE6dAx_deE_o47-DnaMtM6X-hH6Mw(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hello everybody ! > > I installed freeradius-server-2.1.12 with Mysql like a network access > point. > > it works perfectly. I would like to improve my setup. > > somebody can to say me, if it is possible to use a function that allow me > to add a condition based on the last authorization of the computer. > for an example, if the last authorization is superior at X days, the > computer will be on another vlan. > > On the mysql server, the radusergroup of the user is modified. > > Thank for your answer > > Zulzig > >

1 0

Re: Dropping EAPOL frame, not key frame (Norman Elton)
by Rui Ribeiro 14 Nov '14

14 Nov '14

Hi Norman, I have witnessed systematic problems in every new major release of Apple. They only seem to get right the wifi part after minor .6 or .7 updates in some more problematic versions. The last yosemite version is no exception. I am on the beta program, and 10.10.1, the upcoming update, seems to bring again more wifi bug fixes. iOS as you know has had also bug fixes in the last two updates. At home, I had loads of this problems with 3 different MacBook Pros, often the icon was up and down 60s, and only fixed it going to 5Ghz. A lot of wifi BSSIDs seen at home, in excess of 40 at least. The Windows machine was slow, but was not that much problematic. At work, the same thing is happening. We have a large campus deployment, and the experience of OS/X iOS people with 5GHz is radically better than the old models which work only in 2GHz. We also have another big problem at the moment at work, which is the Meru firmware/controller version 6 has been laden with terrible bugs for months. When in Cisco APs the experience is so much better. Regards > > > Message: 1 > Date: Thu, 13 Nov 2014 09:37:49 -0500 > From: Norman Elton <normelton(a)gmail.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Dropping EAPOL frame, not key frame > Message-ID: > < > CAPCnwUeidGnwV9h3Fv8oDsCdbq7R0M3Lt2djWTOydeYWNHMcdQ(a)mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > We have wireless clients doing MS-CHAPv2 authentication against our > access points. FreeRADIUS serves as a proxy between the APs and our > domain controllers. When a Mac laptop connects, or in some cases > roams, we see the wifi icon laddering up and down for 20-30 seconds. > During this time, I've spotted the following error in the laptop's > system.log: > > inputEAPOLFrame: Dropping EAPOL frame, not key frame > > Initial Googling hasn't turned up anything relevant, and I realize > this is likely not a FreeRADIUS issue (as it's only a proxy). But I'm > hoping that the collective wisdom of FreeRADIUS users could shed some > light on what's going on. > > I'm comfortable wiresharking this to death, but my EAP knowledge is > somewhat anemic. Can anyone shed some light on what's going on here? > > Thanks, > > Norman Elton > -- Regards, -- Rui Ribeiro Senior Sysadm ISCTE-IUL https://www.linkedin.com/pub/rui-ribeiro/16/ab8/434

1 0

Resume failing on system reboot
by Joshua 14 Nov '14

14 Nov '14

Using freeradius 2.2.4_2 with an LDAP backend serving WPA enterprise wifi clients. I have an issue that I've been stuck on for days. Auth works just fine, but if say a user restarts his OS X Yosemite laptop on reboot it will report loss of network and fail to connect. Looking at radiusd.logs I see an endless loop of Access-Challenge responses but never an accept. Some time later it starts to work when trying to reconnect. What am I missing here? Below is the error and my configuration: ##### ERROR ##### ERROR rad_recv: Access-Request packet from host 10.1.0.6 port 39552, id=173, length=155 User-Name = "user1" NAS-IP-Address = 10.1.0.6 NAS-Port = 0 Called-Station-Id = "68-86-A7-FF-D0-02:RANDOMSSID" Calling-Station-Id = "3C-15-C2-B7-DC-80" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11a" EAP-Message = 0x0203000a01726c616e67 Message-Authenticator = 0xfda339f6e3f3854c5203dd14e0c5c9fc Info: # Executing section authorize from file /opt/local/etc/raddb/sites-enabled/default Info: +group authorize { Info: ++[preprocess] = ok Info: ++[mschap] = noop Info: [ntdomain] No '\' in User-Name = "user1", looking up realm NULL Info: [ntdomain] No such realm "NULL" Info: ++[ntdomain] = noop Info: [eap] EAP packet type response id 3 length 10 Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Info: ++[eap] = updated Info: ++[expiration] = noop Info: ++[logintime] = noop Info: +} # group authorize = updated Info: Found Auth-Type = EAP Info: # Executing group from file /opt/local/etc/raddb/sites-enabled/default Info: +group authenticate { Info: [eap] EAP Identity Info: [eap] processing type tls Info: [tls] Flushing SSL sessions (of #0) Info: [tls] Initiate Info: [tls] Start returned 1 Info: ++[eap] = handled Info: +} # group authenticate = handled Sending Access-Challenge of id 173 to 10.1.0.6 port 39552 EAP-Message = 0x010400061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x652be819652ff13421bf66d7088d793f Info: Finished request 0. Debug: Going to the next request Debug: Waking up in 4.9 seconds. Thu Nov 13 15:31:49 2014 : Info: Cleaning up request 0 ID 173 with timestamp +60 Thu Nov 13 15:31:49 2014 : Debug: WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Thu Nov 13 15:31:49 2014 : Debug: WARNING: !! EAP session for state 0x652be819652ff134 did not finish! Thu Nov 13 15:31:49 2014 : Debug: WARNING: !! Please read http://wiki.freeradius.org/guide/Certificate_Compatibility Thu Nov 13 15:31:49 2014 : Debug: WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Thu Nov 13 15:31:49 2014 : Info: Ready to process requests. rad_recv: Access-Request packet from host 10.1.0.6 port 39552, id=171, length=155 User-Name = "user1" NAS-IP-Address = 10.1.0.6 NAS-Port = 0 Called-Station-Id = "68-86-A7-FF-D0-02:f" Calling-Station-Id = "3C-15-C2-B7-DC-80" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11a" EAP-Message = 0x0200000a01726c616e67 Message-Authenticator = 0x5713a7f5bda1676ee08343c46dcd5e6f Info: # Executing section authorize from file /opt/local/etc/raddb/sites-enabled/default Info: +group authorize { Info: ++[preprocess] = ok Info: ++[mschap] = noop Info: [ntdomain] No '\' in User-Name = "user1", looking up realm NULL Info: [ntdomain] No such realm "NULL" Info: ++[ntdomain] = noop Info: [eap] EAP packet type response id 0 length 10 Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Info: ++[eap] = updated Info: ++[expiration] = noop Info: ++[logintime] = noop Info: +} # group authorize = updated Info: Found Auth-Type = EAP Info: # Executing group from file /opt/local/etc/raddb/sites-enabled/default Info: +group authenticate { Info: [eap] EAP Identity Info: [eap] processing type tls Info: [tls] Initiate Info: [tls] Start returned 1 Info: ++[eap] = handled Info: +} # group authenticate = handled Sending Access-Challenge of id 171 to 10.1.0.6 port 39552 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xac737dcfac726477626749b4614c2b4e Info: Finished request 1. Debug: Going to the next request Debug: Waking up in 4.9 seconds. Info: Cleaning up request 1 ID 171 with timestamp +74 Debug: WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Debug: WARNING: !! EAP session for state 0xac737dcfac726477 did not finish! Debug: WARNING: !! Please read http://wiki.freeradius.org/guide/Certificate_Compatibility Debug: WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Info: Ready to process requests. rad_recv: Access-Request packet from host 10.1.0.6 port 39552, id=172, length=155 User-Name = "user1" NAS-IP-Address = 10.1.0.6 NAS-Port = 0 Called-Station-Id = "68-86-A7-FF-D0-02:RANDOMSSID" Calling-Station-Id = "3C-15-C2-B7-DC-80" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11a" EAP-Message = 0x0201000a01726c616e67 Message-Authenticator = 0x5a371b7db7a108196d1e06bf7805e0a3 Info: # Executing section authorize from file /opt/local/etc/raddb/sites-enabled/default Info: +group authorize { Info: ++[preprocess] = ok Info: ++[mschap] = noop Info: [ntdomain] No '\' in User-Name = "user1", looking up realm NULL Info: [ntdomain] No such realm "NULL" Info: ++[ntdomain] = noop Info: [eap] EAP packet type response id 1 length 10 Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Info: ++[eap] = updated Info: ++[expiration] = noop Info: ++[logintime] = noop Info: +} # group authorize = updated Info: Found Auth-Type = EAP Info: # Executing group from file /opt/local/etc/raddb/sites-enabled/default Info: +group authenticate { Info: [eap] EAP Identity Info: [eap] processing type tls Info: [tls] Initiate Info: [tls] Start returned 1 Info: ++[eap] = handled Info: +} # group authenticate = handled Sending Access-Challenge of id 172 to 10.1.0.6 port 39552 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd3dbfc2fd3d9e5d577e0b0bda6fe6517 Info: Finished request 2. ##### CONFIGURATION ##### CONFIGURATION Debug: main { Debug: allow_core_dumps = no Debug: } Debug: including dictionary file /opt/local/etc/raddb/dictionary Debug: main { Debug: name = "radiusd" Debug: prefix = "/opt/local" Debug: localstatedir = "/opt/local/var" Debug: sbindir = "/opt/local/sbin" Debug: logdir = "/opt/local/var/log/radius" Debug: run_dir = "/opt/local/var/run/radiusd" Debug: libdir = "/opt/local/lib" Debug: radacctdir = "/opt/local/var/log/radius/radacct" Debug: hostname_lookups = no Debug: max_request_time = 30 Debug: cleanup_delay = 5 Debug: max_requests = 1024 Debug: pidfile = "/opt/local/var/run/radiusd/radiusd.pid" Debug: checkrad = "/opt/local/sbin/checkrad" Debug: debug_level = 0 Debug: proxy_requests = yes Debug: log { Debug: stripped_names = no Debug: auth = no Debug: auth_badpass = no Debug: auth_goodpass = no Debug: } Debug: security { Debug: max_attributes = 200 Debug: reject_delay = 1 Debug: status_server = yes Debug: } Debug: } Debug: radiusd: #### Loading Realms and Home Servers #### Debug: proxy server { Debug: retry_delay = 5 Debug: retry_count = 3 Debug: default_fallback = no Debug: dead_time = 120 Debug: wake_all_if_all_dead = no Debug: } Debug: home_server localhost { Debug: ipaddr = 127.0.0.1 Debug: port = 1812 Debug: type = "auth" Debug: secret = "testing123" Debug: response_window = 20 Debug: max_outstanding = 65536 Debug: require_message_authenticator = yes Debug: zombie_period = 40 Debug: status_check = "status-server" Debug: ping_interval = 30 Debug: check_interval = 30 Debug: num_answers_to_alive = 3 Debug: num_pings_to_alive = 3 Debug: revive_interval = 120 Debug: status_check_timeout = 4 Debug: coa { Debug: irt = 2 Debug: mrt = 16 Debug: mrc = 5 Debug: mrd = 30 Debug: } Debug: } Debug: home_server_pool my_auth_failover { Debug: type = fail-over Debug: home_server = localhost Debug: } Debug: realm example.com { Debug: auth_pool = my_auth_failover Debug: } Debug: realm LOCAL { Debug: } Debug: radiusd: #### Loading Clients #### Debug: client localhost { Debug: ipaddr = 127.0.0.1 Debug: require_message_authenticator = no Debug: secret = "testing123" Debug: nastype = "other" Debug: } Debug: client 10.1.0.5/32 { Debug: require_message_authenticator = no Debug: secret = "433natoma" Debug: shortname = "cisco_ap1" Debug: } Debug: client 10.1.0.6/32 { Debug: require_message_authenticator = no Debug: secret = "433natoma" Debug: shortname = "cisco_ap2" Debug: } Debug: radiusd: #### Instantiating modules #### Debug: instantiate { Debug: (Loaded rlm_exec, checking if it's valid) Debug: Module: Linked to module rlm_exec Debug: Module: Instantiating module "exec" from file /opt/local/etc/raddb/modules/exec Debug: exec { Debug: wait = no Debug: input_pairs = "request" Debug: shell_escape = yes Debug: timeout = 10 Debug: } Debug: (Loaded rlm_expr, checking if it's valid) Debug: Module: Linked to module rlm_expr Debug: Module: Instantiating module "expr" from file /opt/local/etc/raddb/modules/expr Debug: (Loaded rlm_expiration, checking if it's valid) Debug: Module: Linked to module rlm_expiration Debug: Module: Instantiating module "expiration" from file /opt/local/etc/raddb/modules/expiration Debug: expiration { Debug: reply-message = "Password Has Expired " Debug: } Debug: (Loaded rlm_logintime, checking if it's valid) Debug: Module: Linked to module rlm_logintime Debug: Module: Instantiating module "logintime" from file /opt/local/etc/raddb/modules/logintime Debug: logintime { Debug: reply-message = "You are calling outside your allowed timespan " Debug: minimum-timeout = 60 Debug: } Debug: } Debug: radiusd: #### Loading Virtual Servers #### Debug: server { # from file /opt/local/etc/raddb/radiusd.conf Debug: modules { Debug: Module: Creating Post-Auth-Type = REJECT Debug: Module: Checking authenticate {...} for more modules to load Debug: (Loaded rlm_chap, checking if it's valid) Debug: Module: Linked to module rlm_chap Debug: Module: Instantiating module "chap" from file /opt/local/etc/raddb/modules/chap Debug: (Loaded rlm_mschap, checking if it's valid) Debug: Module: Linked to module rlm_mschap Debug: Module: Instantiating module "mschap" from file /opt/local/etc/raddb/modules/mschap Debug: mschap { Debug: use_mppe = yes Debug: require_encryption = yes Debug: require_strong = yes Debug: with_ntdomain_hack = yes Debug: allow_retry = yes Debug: use_open_directory = yes Debug: } Debug: (Loaded rlm_eap, checking if it's valid) Debug: Module: Linked to module rlm_eap Debug: Module: Instantiating module "eap" from file /opt/local/etc/raddb/eap.conf Debug: eap { Debug: default_eap_type = "peap" Debug: timer_expire = 60 Debug: ignore_unknown_eap_types = no Debug: cisco_accounting_username_bug = no Debug: max_sessions = 4096 Debug: } Debug: Module: Linked to sub-module rlm_eap_md5 Debug: Module: Instantiating eap-md5 Debug: Module: Linked to sub-module rlm_eap_leap Debug: Module: Instantiating eap-leap Debug: Module: Linked to sub-module rlm_eap_gtc Debug: Module: Instantiating eap-gtc Debug: gtc { Debug: challenge = "Password: " Debug: auth_type = "PAP" Debug: } Debug: Module: Linked to sub-module rlm_eap_tls Debug: Module: Instantiating eap-tls Debug: tls { Debug: rsa_key_exchange = no Debug: dh_key_exchange = yes Debug: rsa_key_length = 512 Debug: dh_key_length = 512 Debug: verify_depth = 0 Debug: CA_path = "/opt/local/etc/raddb/certs" Debug: pem_file_type = yes Debug: private_key_file = "/opt/local/etc/raddb/certs/server.pem" Debug: certificate_file = "/opt/local/etc/raddb/certs/server.pem" Debug: CA_file = "/opt/local/etc/raddb/certs/ca.pem" Debug: private_key_password = "whatever" Debug: dh_file = "/opt/local/etc/raddb/certs/dh" Debug: fragment_size = 1024 Debug: include_length = yes Debug: check_crl = no Debug: cipher_list = "DEFAULT" Debug: make_cert_command = "/opt/local/etc/raddb/certs/bootstrap" Debug: ecdh_curve = "prime256v1" Debug: cache { Debug: enable = yes Debug: lifetime = 24 Debug: max_entries = 255 Debug: } Debug: verify { Debug: } Debug: ocsp { Debug: enable = no Debug: override_cert_url = yes Debug: url = "http://127.0.0.1/ocsp/" Debug: use_nonce = yes Debug: timeout = 0 Debug: softfail = no Debug: } Debug: } Debug: Module: Linked to sub-module rlm_eap_ttls Debug: Module: Instantiating eap-ttls Debug: ttls { Debug: default_eap_type = "md5" Debug: copy_request_to_tunnel = no Debug: use_tunneled_reply = no Debug: virtual_server = "inner-tunnel" Debug: include_length = yes Debug: } Debug: Module: Linked to sub-module rlm_eap_peap Debug: Module: Instantiating eap-peap Debug: peap { Debug: default_eap_type = "mschapv2" Debug: copy_request_to_tunnel = no Debug: use_tunneled_reply = no Debug: proxy_tunneled_request_as_eap = yes Debug: virtual_server = "inner-tunnel" Debug: soh = no Debug: } Debug: Module: Linked to sub-module rlm_eap_mschapv2 Debug: Module: Instantiating eap-mschapv2 Debug: mschapv2 { Debug: with_ntdomain_hack = no Debug: send_error = no Debug: } Debug: Module: Checking authorize {...} for more modules to load Debug: (Loaded rlm_preprocess, checking if it's valid) Debug: Module: Linked to module rlm_preprocess Debug: Module: Instantiating module "preprocess" from file /opt/local/etc/raddb/modules/preprocess Debug: preprocess { Debug: huntgroups = "/opt/local/etc/raddb/huntgroups" Debug: hints = "/opt/local/etc/raddb/hints" Debug: with_ascend_hack = no Debug: ascend_channels_per_line = 23 Debug: with_ntdomain_hack = no Debug: with_specialix_jetstream_hack = no Debug: with_cisco_vsa_hack = no Debug: with_alvarion_vsa_hack = no Debug: } Debug: reading pairlist file /opt/local/etc/raddb/huntgroups Debug: reading pairlist file /opt/local/etc/raddb/hints Debug: (Loaded rlm_realm, checking if it's valid) Debug: Module: Linked to module rlm_realm Debug: Module: Instantiating module "ntdomain" from file /opt/local/etc/raddb/modules/realm Debug: realm ntdomain { Debug: format = "prefix" Debug: delimiter = "\" Debug: ignore_default = no Debug: ignore_null = no Debug: } Debug: Module: Checking preacct {...} for more modules to load Debug: (Loaded rlm_acct_unique, checking if it's valid) Debug: Module: Linked to module rlm_acct_unique Debug: Module: Instantiating module "acct_unique" from file /opt/local/etc/raddb/modules/acct_unique Debug: acct_unique { Debug: key = "User-Name, Acct-Session-Id, NAS-IP-Address, NAS-Identifier, NAS-Port" Debug: } Debug: Module: Instantiating module "suffix" from file /opt/local/etc/raddb/modules/realm Debug: realm suffix { Debug: format = "suffix" Debug: delimiter = "@" Debug: ignore_default = no Debug: ignore_null = no Debug: } Debug: (Loaded rlm_files, checking if it's valid) Debug: Module: Linked to module rlm_files Debug: Module: Instantiating module "files" from file /opt/local/etc/raddb/modules/files Debug: files { Debug: usersfile = "/opt/local/etc/raddb/users" Debug: acctusersfile = "/opt/local/etc/raddb/acct_users" Debug: preproxy_usersfile = "/opt/local/etc/raddb/preproxy_users" Debug: compat = "no" Debug: } Debug: reading pairlist file /opt/local/etc/raddb/users Debug: reading pairlist file /opt/local/etc/raddb/acct_users Debug: reading pairlist file /opt/local/etc/raddb/preproxy_users Debug: Module: Checking accounting {...} for more modules to load Debug: (Loaded rlm_detail, checking if it's valid) Debug: Module: Linked to module rlm_detail Debug: Module: Instantiating module "detail" from file /opt/local/etc/raddb/modules/detail Debug: detail { Debug: detailfile = "/opt/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" Debug: header = "%t" Debug: detailperm = 384 Debug: dirperm = 493 Debug: locking = no Debug: log_packet_header = no Debug: } Debug: (Loaded rlm_attr_filter, checking if it's valid) Debug: Module: Linked to module rlm_attr_filter Debug: Module: Instantiating module "attr_filter.accounting_response" from file /opt/local/etc/raddb/modules/attr_filter Debug: attr_filter attr_filter.accounting_response { Debug: attrsfile = "/opt/local/etc/raddb/attrs.accounting_response" Debug: key = "%{User-Name}" Debug: relaxed = no Debug: } Debug: reading pairlist file /opt/local/etc/raddb/attrs.accounting_response Debug: Module: Checking session {...} for more modules to load Debug: (Loaded rlm_radutmp, checking if it's valid) Debug: Module: Linked to module rlm_radutmp Debug: Module: Instantiating module "radutmp" from file /opt/local/etc/raddb/modules/radutmp Debug: radutmp { Debug: filename = "/opt/local/var/log/radius/radutmp" Debug: username = "%{User-Name}" Debug: case_sensitive = yes Debug: check_with_nas = yes Debug: perm = 384 Debug: callerid = yes Debug: } Debug: Module: Checking post-proxy {...} for more modules to load Debug: Module: Checking post-auth {...} for more modules to load Debug: Module: Instantiating module "attr_filter.access_reject" from file /opt/local/etc/raddb/modules/attr_filter Debug: attr_filter attr_filter.access_reject { Debug: attrsfile = "/opt/local/etc/raddb/attrs.access_reject" Debug: key = "%{User-Name}" Debug: relaxed = no Debug: } Debug: reading pairlist file /opt/local/etc/raddb/attrs.access_reject Debug: } # modules Debug: } # server Debug: server inner-tunnel { # from file /opt/local/etc/raddb/sites-enabled/inner-tunnel Debug: modules { Debug: Module: Checking authenticate {...} for more modules to load Debug: (Loaded rlm_pap, checking if it's valid) Debug: Module: Linked to module rlm_pap Debug: Module: Instantiating module "pap" from file /opt/local/etc/raddb/modules/pap Debug: pap { Debug: encryption_scheme = "auto" Debug: auto_header = no Debug: } Debug: (Loaded rlm_unix, checking if it's valid) Debug: Module: Linked to module rlm_unix Debug: Module: Instantiating module "unix" from file /opt/local/etc/raddb/modules/unix Debug: unix { Debug: radwtmp = "/opt/local/var/log/radius/radwtmp" Debug: } Debug: Module: Checking authorize {...} for more modules to load Debug: (Loaded rlm_ldap, checking if it's valid) Debug: Module: Linked to module rlm_ldap Debug: Module: Instantiating module "ldap" from file /opt/local/etc/raddb/modules/ldap Debug: ldap { Debug: server = "10.1.0.20" Debug: port = 389 Debug: password = "ykFeQcvhgWpEgT4nKekgZNmCyz8e" Debug: expect_password = yes Debug: identity = "cn=admin,dc=sirono,dc=com" Debug: net_timeout = 1 Debug: timeout = 4 Debug: timelimit = 3 Debug: max_uses = 0 Debug: tls_mode = no Debug: start_tls = no Debug: tls_require_cert = "allow" Debug: tls { Debug: start_tls = no Debug: require_cert = "allow" Debug: } Debug: basedn = "ou=people,dc=sirono,dc=com" Debug: filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" Debug: base_filter = "(objectclass=inetOrgPerson)" Debug: auto_header = no Debug: access_attr_used_for_allow = yes Debug: groupname_attribute = "cn" Debug: groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" Debug: dictionary_mapping = "/opt/local/etc/raddb/ldap.attrmap" Debug: ldap_debug = 0 Debug: ldap_connections_number = 5 Debug: compare_check_items = no Debug: do_xlat = yes Debug: set_auth_type = no Debug: keepalive { Debug: idle = 60 Debug: probes = 3 Debug: interval = 3 Debug: } Debug: } Debug: rlm_ldap: Registering ldap_groupcmp for Ldap-Group Debug: rlm_ldap: Registering ldap_xlat with xlat_name ldap Debug: rlm_ldap: reading ldap<->radius mappings from file /opt/local/etc/raddb/ldap.attrmap Debug: rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ Debug: rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ Debug: rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type Debug: rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use Debug: rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id Debug: rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id Debug: rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password Debug: rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password Debug: rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password Debug: rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password Debug: rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password Debug: rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header Debug: rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT Debug: rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration Debug: rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address Debug: rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type Debug: rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol Debug: rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address Debug: rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask Debug: rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route Debug: rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing Debug: rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id Debug: rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU Debug: rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression Debug: rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host Debug: rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service Debug: rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port Debug: rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number Debug: rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id Debug: rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network Debug: rlm_ldap: LDAP radiusClass mapped to RADIUS Class Debug: rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout Debug: rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout Debug: rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action Debug: rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service Debug: rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node Debug: rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group Debug: rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link Debug: rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network Debug: rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone Debug: rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit Debug: rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port Debug: rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message Debug: rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type Debug: rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type Debug: rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id Debug: conns: 0x7fe01ac55ea0 Debug: Module: Checking session {...} for more modules to load Debug: Module: Checking post-proxy {...} for more modules to load Debug: Module: Checking post-auth {...} for more modules to load Debug: } # modules Debug: } # server Debug: radiusd: #### Opening IP addresses and Ports #### Debug: listen { Debug: type = "auth" Debug: ipaddr = * Debug: port = 0 Debug: } Debug: listen { Debug: type = "acct" Debug: ipaddr = * Debug: port = 0 Debug: } Debug: listen { Debug: type = "control" Debug: listen { Debug: socket = "/opt/local/var/run/radiusd/radiusd.sock" Debug: } Debug: } Debug: listen { Debug: type = "auth" Debug: ipaddr = 127.0.0.1 Debug: port = 18120 Debug: }

4 4

Re: groupreply attribute was override
by chenjiang 14 Nov '14

14 Nov '14

1 0

rlm_cache - WebScale 2.0
by Arran Cudbard-Bell 13 Nov '14

13 Nov '14

The rlm_cache module in master (what will become v3.1.x) has been rewritten internally to support drivers in a similar way to the rlm_sql module. The standard rlm_cache_rbtree driver is still present and works as it did before (I wrote tests to verify that). But there's also a new driver rlm_cache_memcached which integrates rlm_cache with memcached. Using a memcached allows cache state to be shared between multiple radius daemons. It also allows the cache to persist across restarts, which is useful if the cache is critical to the server's performance. The rewritten rlm_cache module behaves in a similar way as before, but with some minor differences in return codes (it will return OK instead of UPDATED, unless it copied a cached entry into the request). It also no longer merges the new cache entry by default, though that can be re-enabled with &control:Cache-Merge := 'yes'. The new behaviour is documented in mods-available/cache. Let me know if you feel any additional libmemcached knobs need exposing. Note: Because of the return code changes, the new cache code will not be merged into v3.0.x as it may break existing installations. --- Whilst investigating cache related things, I found a page on serializing the state of an SSL session in progress. This is potentially interesting for EAP as it would allow the EAP state to be shared between multiple clustered RADIUS servers (allowing for dumb load balancing, and failover). memcached certainly has the throughput to support being used in such a way ~200,000 TPS on untuned commodity hardware, so that might be an interesting thing to investigate in the future if people believe it would be useful. --- redis is another good candidate from a cache store, it's also persistent, so you may see a driver for that in the not too distant future as well. Sooner if there's significant interest. -Arran Arran Cudbard-Bell <a.cudbardb(a)freeradius.org> FreeRADIUS development team FD31 3077 42EC 7FCD 32FE 5EE2 56CF 27F9 30A8 CAA2

2 1