- Freeradius-Users - lists.freeradius.org

EAP-TLS Suggestions on FreeRadius
by Max Freeman 01 Nov '14

01 Nov '14

Hi, I have been working with FreeRadius and reading these threads for sometime now trying to figure out how to properly configure and implement EAP-TLS using ECDHE-ECDSA ciphers. So far, I have been unsuccessful with the TLS handshake properly accepting. I realize that FreeRadius does not work with encryption, but rather passes it off to OpenSSL to do it's "thing." I am writing because perhaps there is a FreeRadius setting/ concept that I have been foolishly neglecting. The client (wpa_Supplicant) sends FreeRadius a Client Hello over TLS 1.0 (could perhaps cause problems with ECC?) and then FreeRadius Rejects it because of and "SSL3_CLIENT_HELLO: no shared cipher." However, I have confirmed that the latest version of openssl supports my cipher. Does the EAP.conf/ FR have anything to do with Elliptic Curve's and their shared cipher besides putting in "ALL" for the cipher and "secptxxx" for the curve? I have also confirmed through OpenSSL's s_client/ s_server program that my certificates are set up properly and ONLY succeed with TLS1_2 and not TLS1.0 or TLS1.1. Thank you for any assistance! I have been scratching my head with this for quite sometime. v/r Max

2 1

issue with reaped processes timing out in rad_waitpid
by Alex Sharaz 01 Nov '14

01 Nov '14

Hi Found this https://www.marshut.net/kqyrtz/reaped-processes-still-timing-out-in-rad-wai… regarding the following error being seen in radius.log. We've just discovered that this is happening a lot here and wondered if anyone has had a chance to look at his proposed patch/ produced another one that rectified the problem. Rgds Alex ....I have hit upon a case where some ntlm_auth processes would return (and write the NT_KEY to the connecting pipe) but FR still complains that it failed and denies authentication (this is on 2.2.5). This manifests in the logs like the following: Tue Oct 28 11:10:15 2014 : Auth: Login incorrect (mschap: External script says NT_KEY: 4BCE6CA72058BA7EE500D1A68A8771C0): [tstRad9] (from client 155.98.204.47 port 0 cli 02-00-00-00-00-01 via TLS tunnel) Since this is actually the output for a valid and successful authentication, it appears that the exit code is the real issue. That exit code is either that of the process itself or 2 if rad_waitpid times out while waiting for the child. After adding some debugging statements and recompiling I found that there were cases where reap_children would reap a child process but the pid would not be found in thread_pool.waiters. This only happened when there were a significant number of auths per seconds and still not consistently. Some head scratching ensued and a colleague then suggested there may be a race condition between rad_fork (where it calls fr_hash_table_insert) and reap_children (where it calls fr_hash_table_finddata). .......

4 5

Multi-packet session state will be in version 3.0.5
by Alan DeKok 31 Oct '14

31 Oct '14

The server has historically had problems dealing with authentication conversations that cross multiple packets. The existing "use_tunnel_reply" feature in TTLS and PEAP help, but aren't perfect. The behavior is not clear, and it's easy to get the configuration wrong. Version 3.0.5 fixes this problem. You can now do: authorize { ... update session-state { attributes ... } } These attributes are automatically cached when the server sends an Access-Challenge. They are automatically retrieved when the server receives an Access-Request. They are automatically deleted when the server sends an Access-Accept or Access-Reject. This means that the "inner-tunnel" server can now do: update outer.session-state { ... } And the final Access-Accept can be updated by the following code: post-auth { ... update { reply += session-state } } This feature should hopefully be simpler (and better) than the previous configurations. The code is available now in the v3.0.x branch in git. Please try it before 3.0.5 is released! Alan DeKok.

2 1

Re: FR 3.0.x Head + coova chilli + mysql Volume Limit
by Abdullah 30 Oct '14

30 Oct '14

need advice please as to what am i doing wrong On Wed, Oct 29, 2014 at 6:19 PM, Abdullah <b.hawks123(a)gmail.com> wrote: > log showing how user logged in on 3 separate occasions and was able to > continue using data despite crossing 4gb limit since previous sessions > record isnt taken into consideration. > But once he uses up 4gb on one single session, he gets disconnected and > cant login again > >

3 6

Enterasys Wireless controller with Mgmt user authentication via RADIUS MSCHAP
by Alan Alejandro Villaverde 30 Oct '14

30 Oct '14

Hi all, I hope you are all fine. I am deploying a Radius server to authenticate mgmt users of a Enterasys Wireless Controller. The problem is that when I set WLC to authenticate via radius using MSCHAP I get Access-reject. First of all, I keep the radius config files as default and when debugging it I noticed that for some reason radius is trying to authenticate by UNIX Cleartext Password. For PAP authentication it is ok and all works great but not for MSCHAP. Then, I set Auth-type = MSCHAP in "users" config file and here the things changed. The auth now is done by mschap but it is still requesting a clear text password. After that it tries with LM-password / NT-password. I read this article http://deployingradius.com/documents/configuration/active_directory.html But I cant sort out this problem. Is It possible to set Enterasys Wireless controller to authenticate mgmt users via MSCHAP Radius??? Can it be done without LM-password or NT-password? Sorry for that, but It is getting me crazy. I kindly request you for help. Thanks in advance. BR. -- Alan Alejandro Villaverde. ,JL. j@, Zv uJ.u@qJ :LBO:v1 :r1@ MB G1 rB8Ur , r@Ei O .7 @. :N,:BBO05v,:, :7 u Or vM@r:E: rqr,: .v X Or 7@r v@U ,@::: 5 .L M: YO:2@OS. . .7: N iP Y@riBr ,:i::: :q ,q. qk :ii YO. iv7r77r iGF :7v7 :u0u. 7Lj ;5k1r7BN 7P552552v: LUM1, 7FUi:..v@B ik7JMJ. ..,v@rk. _..._ Y8. vL: .5@v E. .' '. ui,N: .G.O@: @ / _ _ \ .P: J7LEBO Bi | (o)_(o) | .1 i@B7 .MU \( ) / 2 :M@u .uMi //'._.'\ \ :k :U@BOi:vSM2B // . \ \ 7E@B@B@O8PrMk ;B || . \ \ @: @r |\ : / | EM. ;@ \ `) ' (` /_ .B7 0L _)``".____,.'"` (_ ..,:i;7vjuFXZEOMMBBL:::.rB@B@B@ ) )'--'( ( .,::ir77vvJjuu2UF5SS00GZOMBB@B@B@B@B@B@ '---` `---` ::iirr77rrr77vLLLjuu25FXPNZGMOOO@B@B@B@B@@@B@B@B@B :i:i::,:,i,:,:.:.:.:.:.:.:.,.,.,............. ...

3 6

Authentication problems depending on connection type
by Alex Gregory 30 Oct '14

30 Oct '14

Hello- I am using FreeRadius to proxy connections to an OTP server for a WiFi solution. It looks users up in LDAP and if they exist proxy’s the password in clear text to the Radius server. I am testing on a Cisco WLC and using a Meraki device in production. Not ideal for identical testing I know its buts all I have. They are pointing to the same radius/ldap server. I have things working as long as I am using the Meraki “splash page” to have users authenticate against. I just keep the network open and they connect to the network to authenticate. The problem is the login page comes up but is not consistent. I would rather have my users authenticate with the OTP when joining the network via the OS. With MAC’s this takes a custom profile. In order to do that I have to send the passwords in the clear so I am using PAP-TTLS in the configuration utility to create the profile. If I use the splash page on the open network on the Meraki the access-request looks like this (with a User-Password field): Sending Access-Request Id 211 from 0.0.0.0:39633 to 94.143.115.73:1812 Acct-Session-Id = '569705352865660562' Called-Station-Id = '00-18-0A-32-AF-AA:company Devs' Calling-Station-Id = '14-10-9F-E1-B0-D3' Framed-IP-Address = 10.197.125.204 NAS-Identifier = 'Cisco Meraki cloud RADIUS client' NAS-IP-Address = 108.161.147.80 NAS-Port = 0 NAS-Port-Id = 'Wireless-802.11' NAS-Port-Type = Wireless-802.11 Service-Type = Login-User User-Name = 'haydn' User-Password = 'r4ffev' Event-Timestamp = 'Oct 22 2014 22:23:15 UTC' Message-Authenticator := 0x00 Proxy-State = 0x32 Waking up in 0.1 seconds. When I do it on the WLC with the OS network level connection I get this: Sending Access-Request Id 123 from 0.0.0.0:58776 to 94.143.115.73:1812 User-Name = 'alexgregory' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '78-31-c1-be-89-a8' Called-Station-Id = 'd4-a0-2a-15-7f-00:C2_8021x' NAS-Port = 4 Cisco-AVPair = 'audit-session-id=0a210082000009be54483291' NAS-IP-Address = 10.33.0.130 NAS-Identifier = 'isewlc' Airespace-Wlan-Id = 6 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201001001616c6578677265676f7279 Message-Authenticator = 0x40c1f142e786e20cf3836cfe05549f35 Event-Timestamp = 'Oct 22 2014 22:41:38 UTC' Proxy-State = 0x3137 Waking up in 0.3 seconds. My question is am I using the same radius config sections when I connect via the OS dialog? What could cause the change on how things are forwarded from the FreeRadius server? It looks like it does EAP which I do not want it to do. (full config and authentication below) Thanks, Alex root@radius:/etc/init.d# /usr/local/sbin/radiusd -X radiusd: FreeRADIUS Version 3.0.4, for host x86_64-unknown-linux-gnu, built on Sep 25 2014 at 20:37:45 Copyright (C) 1999-2014 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/local/share/freeradius/dictionary including dictionary file /usr/local/share/freeradius/dictionary.dhcp including dictionary file /usr/local/share/freeradius/dictionary.vqp including dictionary file /usr/local/etc/raddb/dictionary including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/mods-enabled/ including configuration file /usr/local/etc/raddb/mods-enabled/mschap including configuration file /usr/local/etc/raddb/mods-enabled/passwd including configuration file /usr/local/etc/raddb/mods-enabled/digest including configuration file /usr/local/etc/raddb/mods-enabled/dhcp including configuration file /usr/local/etc/raddb/mods-enabled/eap including configuration file /usr/local/etc/raddb/mods-enabled/realm including configuration file /usr/local/etc/raddb/mods-enabled/echo including configuration file /usr/local/etc/raddb/mods-enabled/utf8 including configuration file /usr/local/etc/raddb/mods-enabled/always including configuration file /usr/local/etc/raddb/mods-enabled/pap including configuration file /usr/local/etc/raddb/mods-enabled/detail.log including configuration file /usr/local/etc/raddb/mods-enabled/chap including configuration file /usr/local/etc/raddb/mods-enabled/expr including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp including configuration file /usr/local/etc/raddb/mods-enabled/radutmp including configuration file /usr/local/etc/raddb/mods-enabled/unix including configuration file /usr/local/etc/raddb/mods-enabled/soh including configuration file /usr/local/etc/raddb/mods-enabled/logintime including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients including configuration file /usr/local/etc/raddb/mods-enabled/files including configuration file /usr/local/etc/raddb/mods-enabled/unpack including configuration file /usr/local/etc/raddb/mods-enabled/replicate including configuration file /usr/local/etc/raddb/mods-enabled/ldap including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter including configuration file /usr/local/etc/raddb/mods-enabled/linelog including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap including configuration file /usr/local/etc/raddb/mods-enabled/detail including configuration file /usr/local/etc/raddb/mods-enabled/ldap-dev including configuration file /usr/local/etc/raddb/mods-enabled/exec including configuration file /usr/local/etc/raddb/mods-enabled/expiration including configuration file /usr/local/etc/raddb/mods-enabled/preprocess including configuration file /usr/local/etc/raddb/mods-enabled/eap-dev including files in directory /usr/local/etc/raddb/policy.d/ including configuration file /usr/local/etc/raddb/policy.d/dhcp including configuration file /usr/local/etc/raddb/policy.d/eap including configuration file /usr/local/etc/raddb/policy.d/cui including configuration file /usr/local/etc/raddb/policy.d/debug including configuration file /usr/local/etc/raddb/policy.d/filter including configuration file /usr/local/etc/raddb/policy.d/operator-name including configuration file /usr/local/etc/raddb/policy.d/accounting including configuration file /usr/local/etc/raddb/policy.d/control including configuration file /usr/local/etc/raddb/policy.d/canonicalization including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/default-dev including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel-dev including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default main { security { allow_core_dumps = no } } main { name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" sbindir = "/usr/local/sbin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } security { max_attributes = 200 reject_delay = 1 status_server = yes allow_vulnerable_openssl = "yes" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server inwebo1 { ipaddr = 94.143.115.73 port = 1812 type = "auth" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server inwebo2 { ipaddr = 94.143.115.75 port = 1812 type = "auth" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server_pool inwebo { type = fail-over home_server = inwebo1 home_server = inwebo2 } realm DEFAULT { auth_pool = inwebo nostrip } radiusd: #### Loading Clients #### client allhosts { ipaddr = * require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } radiusd: #### Instantiating modules #### instantiate { } modules { # Loaded module rlm_mschap # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_passwd # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Loaded module rlm_digest # Instantiating module "digest" from file /usr/local/etc/raddb/mods-enabled/digest # Loaded module rlm_dhcp # Instantiating module "dhcp" from file /usr/local/etc/raddb/mods-enabled/dhcp # Loaded module rlm_eap # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no mod_accounting_username_bug = no max_sessions = 1024 } # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" ca_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/usr/local/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = yes } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_method = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Loaded module rlm_realm # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_exec # Instantiating module "echo" from file /usr/local/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_utf8 # Instantiating module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8 # Loaded module rlm_always # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_pap # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_detail # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Loaded module rlm_chap # Instantiating module "chap" from file /usr/local/etc/raddb/mods-enabled/chap # Loaded module rlm_expr # Instantiating module "expr" from file /usr/local/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } # Instantiating module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_radutmp # Instantiating module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/usr/local/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Instantiating module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_unix # Instantiating module "unix" from file /usr/local/etc/raddb/mods-enabled/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } # Loaded module rlm_soh # Instantiating module "soh" from file /usr/local/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_logintime # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_dynamic_clients # Instantiating module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_files # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files files { filename = "/usr/local/etc/raddb/mods-config/files/authorize" usersfile = "/usr/local/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy" compat = "cistron" } reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize [/usr/local/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... [/usr/local/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/usr/local/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize [/usr/local/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... [/usr/local/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/usr/local/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy # Loaded module rlm_unpack # Instantiating module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack # Loaded module rlm_replicate # Instantiating module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate # Loaded module rlm_ldap # Instantiating module "ldap" from file /usr/local/etc/raddb/mods-enabled/ldap ldap { server = "ldap.team.company.com" port = 389 password = <<< secret >>> identity = "cn=admin,dc=team,dc=company,dc=com" user { filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" scope = "sub" base_dn = "ou=corp,ou=Users,dc=team,dc=company,dc=com" access_positive = yes } group { filter = "(objectClass=posixGroup)" scope = "sub" base_dn = "ou=corp,ou=Users,dc=team,dc=company,dc=com" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=frClient)" scope = "sub" base_dn = "ou=corp,ou=Users,dc=team,dc=company,dc=com" attribute { identifier = "radiusClientIdentifier" shortname = "cn" secret = "radiusClientSecret" } } profile { filter = "(&)" } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 20 srv_timelimit = 20 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } rlm_ldap: Falling back to build time libldap version info. Query for LDAP_OPT_API_INFO returned: -1 rlm_ldap: libldap vendor: OpenLDAP version: 20431 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 4 max = 32 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 1 spread = no } rlm_ldap (ldap): Opening additional connection (0) rlm_ldap (ldap): Connecting to ldap.team.company.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1) rlm_ldap (ldap): Connecting to ldap.team.company.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2) rlm_ldap (ldap): Connecting to ldap.team.company.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3) rlm_ldap (ldap): Connecting to ldap.team.company.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4) rlm_ldap (ldap): Connecting to ldap.team.company.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Loaded module rlm_attr_filter # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response # Loaded module rlm_linelog # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog linelog { filename = "/usr/local/var/log/radius/linelog" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{Packet-Type}:-default}" } # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/usr/local/var/log/radius/linelog-accounting" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_cache # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap cache cache_eap { key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 16384 epoch = 0 add_stats = no } # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail detail { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "ldap-dev" from file /usr/local/etc/raddb/mods-enabled/ldap-dev ldap ldap-dev { server = "ldap.team.company.com" port = 389 password = <<< secret >>> identity = "cn=admin,dc=team,dc=company,dc=com" user { filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" scope = "sub" base_dn = "ou=dev,ou=Users,dc=team,dc=company,dc=com" access_positive = yes } group { filter = "(objectClass=posixGroup)" scope = "sub" base_dn = "ou=dev,ou=Users,dc=team,dc=company,dc=com" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=frClient)" scope = "sub" base_dn = "ou=dev,ou=Users,dc=team,dc=company,dc=com" attribute { identifier = "radiusClientIdentifier" shortname = "cn" secret = "radiusClientSecret" } } profile { filter = "(&)" } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 20 srv_timelimit = 20 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap-dev): Initialising connection pool pool { start = 5 min = 4 max = 32 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 1 spread = no } rlm_ldap (ldap-dev): Opening additional connection (0) rlm_ldap (ldap-dev): Connecting to ldap.team.company.com:389 rlm_ldap (ldap-dev): Waiting for bind result... rlm_ldap (ldap-dev): Bind successful rlm_ldap (ldap-dev): Opening additional connection (1) rlm_ldap (ldap-dev): Connecting to ldap.team.company.com:389 rlm_ldap (ldap-dev): Waiting for bind result... rlm_ldap (ldap-dev): Bind successful rlm_ldap (ldap-dev): Opening additional connection (2) rlm_ldap (ldap-dev): Connecting to ldap.team.company.com:389 rlm_ldap (ldap-dev): Waiting for bind result... rlm_ldap (ldap-dev): Bind successful rlm_ldap (ldap-dev): Opening additional connection (3) rlm_ldap (ldap-dev): Connecting to ldap.team.company.com:389 rlm_ldap (ldap-dev): Waiting for bind result... rlm_ldap (ldap-dev): Bind successful rlm_ldap (ldap-dev): Opening additional connection (4) rlm_ldap (ldap-dev): Connecting to ldap.team.company.com:389 rlm_ldap (ldap-dev): Waiting for bind result... rlm_ldap (ldap-dev): Bind successful # Instantiating module "exec" from file /usr/local/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Loaded module rlm_preprocess # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints } # modules radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc/raddb/radiusd.conf } # server server default-dev { # from file /usr/local/etc/raddb/sites-enabled/default-dev # Creating Auth-Type = digest # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default-dev server inner-tunnel-dev { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-dev # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel-dev server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel server default { # from file /usr/local/etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 1814 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 1815 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 18144 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 18155 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18121 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address * port 1814 as server default-dev Listening on acct address * port 1815 as server default-dev Listening on auth address :: port 18144 as server default-dev Listening on acct address :: port 18155 as server default-dev Listening on auth address 127.0.0.1 port 18121 as server inner-tunnel-dev Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel Listening on auth address * port 1812 as server default Listening on acct address * port 1813 as server default Listening on auth address :: port 1812 as server default Listening on acct address :: port 1813 as server default Opening new proxy socket 'proxy address * port 0' Listening on proxy address * port 32995 Ready to process requests root@radius:/usr/local/etc/raddb# Received Access-Request Id 32 from x.x.x.x:32768 to 10.11.1.102:1812 length 224 User-Name = 'alexgregory' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '80-be-05-37-1d-7e' Called-Station-Id = 'd4-a0-2a-15-7f-00:C2_8021x' NAS-Port = 4 Cisco-AVPair = 'audit-session-id=0a210082000009d954484123' NAS-IP-Address = 10.33.0.130 NAS-Identifier = 'isewlc' Airespace-Wlan-Id = 6 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201001001616c6578677265676f7279 Message-Authenticator = 0x2b99d4f0f2119601ec9e7d2c51197379 (36) Received Access-Request packet from host x.x.x.x port 32768, id=32, length=224 (36) User-Name = 'alexgregory' (36) Chargeable-User-Identity = 0x00 (36) Location-Capable = Civix-Location (36) Calling-Station-Id = '80-be-05-37-1d-7e' (36) Called-Station-Id = 'd4-a0-2a-15-7f-00:C2_8021x' (36) NAS-Port = 4 (36) Cisco-AVPair = 'audit-session-id=0a210082000009d954484123' (36) NAS-IP-Address = 10.33.0.130 (36) NAS-Identifier = 'isewlc' (36) Airespace-Wlan-Id = 6 (36) Service-Type = Framed-User (36) Framed-MTU = 1300 (36) NAS-Port-Type = Wireless-802.11 (36) EAP-Message = 0x0201001001616c6578677265676f7279 (36) Message-Authenticator = 0x2b99d4f0f2119601ec9e7d2c51197379 (36) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (36) authorize { (36) filter_username filter_username { (36) if (!&User-Name) (36) if (!&User-Name) -> FALSE (36) if (&User-Name =~ / /) (36) if (&User-Name =~ / /) -> FALSE (36) if (&User-Name =~ /@.*@/ ) (36) if (&User-Name =~ /@.*@/ ) -> FALSE (36) if (&User-Name =~ /\\.\\./ ) (36) if (&User-Name =~ /\\.\\./ ) -> FALSE (36) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (36) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (36) if (&User-Name =~ /\\.$/) (36) if (&User-Name =~ /\\.$/) -> FALSE (36) if (&User-Name =~ /(a)\\./) (36) if (&User-Name =~ /(a)\\./) -> FALSE (36) } # filter_username filter_username = notfound (36) [preprocess] = ok (36) [chap] = noop (36) [mschap] = noop (36) [digest] = noop (36) suffix : Checking for suffix after "@" (36) suffix : No '@' in User-Name = "alexgregory", looking up realm NULL (36) suffix : Found realm "DEFAULT" (36) suffix : Adding Realm = "DEFAULT" (36) suffix : Proxying request from user alexgregory to realm DEFAULT (36) suffix : Preparing to proxy authentication request to realm "DEFAULT" (36) [suffix] = updated (36) eap : Request is supposed to be proxied to Realm DEFAULT. Not doing EAP. (36) [eap] = noop (36) [files] = noop rlm_ldap (ldap): Reserved connection (24) (36) ldap : EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (36) ldap : --> (uid=alexgregory) (36) ldap : EXPAND ou=corp,ou=Users,dc=team,dc=company,dc=com (36) ldap : --> ou=corp,ou=Users,dc=team,dc=company,dc=com (36) ldap : Performing search in 'ou=corp,ou=Users,dc=team,dc=company,dc=com' with filter '(uid=alexgregory)', scope 'sub' (36) ldap : Waiting for search result... (36) ldap : User object found at DN "cn=Alex Gregory,ou=corp,ou=Users,dc=team,dc=company,dc=com" (36) ldap : Processing user attributes (36) ldap : control:Password-With-Header += '{MD5}CMlNz7iY6jR52tEK4gzKkQ==' rlm_ldap (ldap): Released connection (24) rlm_ldap (ldap): Closing connection (23): Hit idle_timeout, was idle for 1927 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing connection (22): Hit idle_timeout, was idle for 1934 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing connection (21): Hit idle_timeout, was idle for 1941 seconds rlm_ldap (ldap): You probably need to lower "min" (36) [ldap] = ok (36) if (notfound) (36) if (notfound) -> FALSE (36) [expiration] = noop (36) [logintime] = noop (36) [pap] = noop (36) } # authorize = updated (36) Proxying request to home server 94.143.115.73 port 1812 timeout 30.000000 (36) Sending Access-Request packet to host 94.143.115.73 port 1812, id=115, length=0 (36) User-Name = 'alexgregory' (36) Chargeable-User-Identity = 0x00 (36) Location-Capable = Civix-Location (36) Calling-Station-Id = '80-be-05-37-1d-7e' (36) Called-Station-Id = 'd4-a0-2a-15-7f-00:C2_8021x' (36) NAS-Port = 4 (36) Cisco-AVPair = 'audit-session-id=0a210082000009d954484123' (36) NAS-IP-Address = 10.33.0.130 (36) NAS-Identifier = 'isewlc' (36) Airespace-Wlan-Id = 6 (36) Service-Type = Framed-User (36) Framed-MTU = 1300 (36) NAS-Port-Type = Wireless-802.11 (36) EAP-Message = 0x0201001001616c6578677265676f7279 (36) Message-Authenticator = 0x2b99d4f0f2119601ec9e7d2c51197379 (36) Event-Timestamp = 'Oct 22 2014 23:43:34 UTC' (36) Realm = 'DEFAULT' (36) EAP-Type = Identity (36) Proxy-State = 0x3332 Sending Access-Request Id 115 from 0.0.0.0:58776 to 94.143.115.73:1812 User-Name = 'alexgregory' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '80-be-05-37-1d-7e' Called-Station-Id = 'd4-a0-2a-15-7f-00:C2_8021x' NAS-Port = 4 Cisco-AVPair = 'audit-session-id=0a210082000009d954484123' NAS-IP-Address = 10.33.0.130 NAS-Identifier = 'isewlc' Airespace-Wlan-Id = 6 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201001001616c6578677265676f7279 Message-Authenticator = 0x2b99d4f0f2119601ec9e7d2c51197379 Event-Timestamp = 'Oct 22 2014 23:43:34 UTC' Proxy-State = 0x3332 Waking up in 0.3 seconds. Waking up in 0.1 seconds. (36) Expecting proxy response no later than 29.499710 seconds from now Waking up in 29.4 seconds. Received Access-Reject Id 115 from 94.143.115.73:1812 to 10.11.1.102:58776 length 24 Proxy-State = 0x3332 (36) Received Access-Reject packet from host 94.143.115.73 port 1812, id=115, length=24 (36) Proxy-State = 0x3332 (36) # Executing section post-proxy from file /usr/local/etc/raddb/sites-enabled/default (36) post-proxy { (36) eap : No pre-existing handler found (36) [eap] = noop (36) } # post-proxy = noop (36) Using Post-Auth-Type Reject (36) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (36) Post-Auth-Type REJECT { (36) attr_filter.access_reject : EXPAND %{User-Name} (36) attr_filter.access_reject : --> alexgregory (36) attr_filter.access_reject : Matched entry DEFAULT at line 11 (36) [attr_filter.access_reject] = updated (36) eap : Request was previously rejected, inserting EAP-Failure (36) [eap] = updated (36) remove_reply_message_if_eap remove_reply_message_if_eap { (36) if (&reply:EAP-Message && &reply:Reply-Message) (36) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (36) else else { (36) [noop] = noop (36) } # else else = noop (36) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop (36) } # Post-Auth-Type REJECT = updated (36) Delaying response for 1 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. Received Access-Request Id 32 from x.x.x.x:32768 to 10.11.1.102:1812 length 224 (36) Discarding duplicate request from client allhosts port 32768 - ID: 32 due to delayed response Waking up in 0.1 seconds. (36) Sending delayed response (36) Sending Access-Reject packet to host x.x.x.x port 32768, id=32, length=0 (36) EAP-Message = 0x04010004 (36) Message-Authenticator = 0x00000000000000000000000000000000 Sending Access-Reject Id 32 from 10.11.1.102:1812 to x.x.x.x:32768 EAP-Message = 0x04010004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (36) Cleaning up request packet ID 32 with timestamp +4144 Ready to process requests

3 5

Reject delay fractional value
by Eugene Grosbein 30 Oct '14

30 Oct '14

Hi! Small feature request: please make it possible to specify fractional values of seconds for Reject delay values. I need this for dhcp module, 1 second is too small for me but 2 is too large :-) I'd like to specify 1.5 or 1.8 seconds. 1/100th second precision ought be enough :-) Eugene Grosbein

3 10

Timestamps
by Mike Gadoury 29 Oct '14

29 Oct '14

Is there any way to get timestamps to printed in the debug log file? I'm having issues with clients periodically failing to authenticate properly and I'm wondering if a slow directory may be the cause of the issues. The version I'm running is: radiusd: FreeRADIUS Version 2.1.12, for host x86_64-redhat-linux-gnu, built on Jan 9 2013 at 05:03:12 Thanks for your help. Mike

2 1

A new CRL processing
by vincent viard 29 Oct '14

29 Oct '14

Hi, I just want to know if the following statement is always true: "You will still need to restart FreeRADIUS after downloading a new CRL" Thanks Vince

4 3

802.1X Radius with Yubikey
by Philip Wege 29 Oct '14

29 Oct '14

Hi All Has anyone managed to get yubikeys to work with wireless network access using yubikeys ? I'm trying to get 802.1x to work with yubikeys using freeraduis 3, local user in the users file and the yubikey module. I'm constantly running into the same error which is shown below: yubikey : No cleartext password in the request. Can't do Yubikey authentication Default eap type is peap and default eap type under peap is gtc and gtc auth type is pap I'm testing with a user defined in the users file and I'm trying authorize and authenticate as shown below in the inner tunnel: Authorize : eap if (ok || updated) { yubikey files } else { reject ( This is so that if no yubikey is submitted along with password radius should reject the auth * this works in default when authing vpn access under the yubikey authorize * ) } Authenticate : Auth-Type PAP { yubikey pap } I have tried defining a separate auth type like suggested in a previous mailing list post but startup kept on failing with error unknown auth type for eap_gtc yubikey when trying to do this: Auth-Type yubikey { yubikey pap }

2 2