- Freeradius-Users - lists.freeradius.org

Questions about FreeRadius and unsupported characters for secret...
by Tammy Dore 28 Mar '23

28 Mar '23

Hi, We have received a number of issues reported by our customers in regards to the secret authentication does not support certain characters in our software released based on FreeRadius v3.0.19. As a result of this, we had done some of our own comparison testing of a bunch of different special characters against both the v3.0.19 and the v2.2.9 releases. We found the following discrepancies, where it appears that there are bugs introduced into v3.0.19. 1. We would like to understand what explanation there is for why they are no longer supported or if a bug was introduced, so we can offer an explanation to our customers. 2. If there is a work-around, would you kindly let us know? 3. Do you know if these issues have been corrected in one of your newer releases? Secret value 8.4 Results (3.0.19) 8.3 Results (2.2.9) Comments testing123, Failed Passed (no quote) Supported in 2.2.9. Not Supported at All in 3.0.19.; not even with correct_escapes = false. radiusd:121302:1679518016.577067:Wed Mar 22 15:46:56 2023: Wed Mar 22 15:46:56 2023 : Info: Dropping packet without response because of error: Received packet from 10.16.167.194 with invalid Message-Authenticator! (Shared secret is incorrect.) testing123; Failed Passed (in single or double quotes or with testing123\;) Supported in 2.2.9. Not Supported at All in 3.0.19. radiusd:121302:1679518016.577067:Wed Mar 22 15:46:56 2023: Wed Mar 22 15:46:56 2023 : Info: Dropping packet without response because of error: Received packet from 10.16.167.194 with invalid Message-Authenticator! (Shared secret is incorrect.) "testing123\054" Failed Passed Supported in 2.2.9. Not Supported at All in 3.0.19. radiusd:151163:1679691163.765497:Fri Mar 24 15:52:43 2023: Fri Mar 24 15:52:43 2023 : Error: /usr/local/forescout/plugin/dot1x/fs_radius/etc/raddb/sites-enabled/default[116]: Invalid regular expression: radiusd:151163:1679691163.765522:Fri Mar 24 15:52:43 2023: Fri Mar 24 15:52:43 2023 : Error: /usr/local/forescout/plugin/dot1x/fs_radius/etc/raddb/sites-enabled/default[116]: ^(.*)\(.*) radiusd:151163:1679691163.765546:Fri Mar 24 15:52:43 2023: Fri Mar 24 15:52:43 2023 : Error: /usr/local/forescout/plugin/dot1x/fs_radius/etc/raddb/sites-enabled/default[116]: ^ Pattern compilation failed: unmatched parentheses ^*B%9vÑStNfx9H Failed Passed Supported in 2.2.9. Not Supported at All in 3.0.19. radiusd:151392:1679933409.952848:Mon Mar 27 11:10:09 2023: Mon Mar 27 11:10:08 2023 : Error: /usr/local/forescout/plugin/dot1x/fs_radius/etc/raddb/fs_clients.conf[19]: Syntax error: Expected comma after '^*B%9v': ÑStNfx9H radiusd:1 Note: The last one seems to be an issue with the accent mark over the N. Thank you in advance for your help! Tammy Dore Sr. Software Engineer Forescout Technologies, Inc. Email: tammy.dore(a)forescout.com<mailto:tammy.dore@forescout.com> Text: +1-214-403-2010 LinkedIn: https://www.linkedin.com/in/TammyDore/ [cid:image001.png@01D960F9.56EA0200] WARNING - CONFIDENTIAL INFORMATION: ________________________________ This message may contain confidential and privileged information. If it has been sent to you in error, please reply to advise the sender of the error and then immediately delete it. If you are not the intended recipient, do not read, copy, disclose or otherwise use this message. The sender disclaims any liability for such unauthorized use. NOTE that all incoming emails sent to Forescout email accounts will be archived and may be scanned by us and/or by external service providers to detect and prevent threats to our systems, investigate illegal or inappropriate behavior, and/or eliminate unsolicited promotional emails ("spam"). If you have any concerns about this process, please contact us privacy(a)forescout.com.

2 1

LDAPS Unknown error from LDAP module
by Grosjean Cyril 27 Mar '23

27 Mar '23

Hello, I’m using Freeradius 3.2.1 and with a standard config connected to an LDAPS server, some requests (bind as admin, search/bind as user/…) are currently finishing with those kind of errors : Tue Mar 14 03:08:56 2023 : Auth: (43138) Login incorrect (ldap: Failed performing search: Unknown error): [user@domain] (from client XXX port 0 via TLS tunnel) Tue Mar 14 03:30:24 2023 : Auth: (43714) Login incorrect (ldap: Bind with uid=serviceaccount,dc=subdomain,dc=com to ldaps://server:636 <mimestream://server:636> failed: Unknown error): [user@domain] (from client XXX port 0 via TLS tunnel) I can see something like 3 to 5% of requests being made and finishing as “Unknown error”. 1/ Can you confirm that the “Unknown error” is from the LDAP response and not Freeradius ? Can we have more information about status code of the response ? I’m seeing here two occurences of “Unknown error” in the ldap module (ldap.c) but I can’t get more information, and it is hard for me to activate debug that show Radius attribute in stdout (as some of them are sensitive). 2/ Can I activate more debug on thoses errors to get the bottom of it ? Do you have any insight to help me get more information ? Here is my LDAP config : ldap { server = 'ldaps://serverldap.com' port = 636 identity = 'uid=serviceaccount,dc=subdomain,dc=com' password = ‘password' base_dn = 'dc=subdomain,dc=com' update { control: += 'radiusControlAttribute' request: += 'radiusRequestAttribute' reply: += 'radiusReplyAttribute' } user_dn = "LDAP-UserDn" user { base_dn = "ou=users,${..base_dn}" filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" } group { base_dn = "ou=groups,${..base_dn}" filter = '(objectClass=posixGroup)' name_attribute = cn membership_attribute = 'memberOf' cacheable_name = 'no' cacheable_db = 'no' } profile { } accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" type { start { update { description := "Online at %S" } } interim-update { update { description := "Last seen at %S" } } stop { update { description := "Offline at %S" } } } } post-auth { update { description := "Authenticated at %S" } } options { chase_referrals = no rebind = yes res_timeout = 20 srv_timelimit = 3 net_timeout = 10 idle = 60 probes = 3 interval = 3 ldap_debug = 0x0000 } tls { require_cert = 'allow' tls_min_version = "1.2" } pool { start = ${thread[pool].start_servers} min = ${thread[pool].min_spare_servers} max = ${thread[pool].max_servers} spare = ${thread[pool].max_spare_servers} uses = 0 retry_delay = 30 lifetime = 0 idle_timeout = 60 } } Thanks, Cyril

2 1

Edit User-Name based on regex
by ANGEL LUIS MATEO MARTINEZ 27 Mar '23

27 Mar '23

Hello, I have a scenario where I need to modify User-Name, before any AAA operation, based on a regex substitution. To be precise, the users are sending a MAC as the username, in the form "00:11:22:33:44:55" and I need to transform this to "001122334455". This may be a silly question, but I haven't found how to do it. Is there any way to do it? Thank you. -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868889150 Fax: 868888337

3 3

Freeradius authentication for VSP VOSS Switch
by shamsher singh 24 Mar '23

24 Mar '23

Hello List, I have been trying to authenticate using radius with Extreme VSP switch, the radius seems to accept the authentication, but the switch still fails Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 131.232.33.8 port 44016, id=243, length=68 User-Name = "test" User-Password = "test" NAS-IP-Address = 131.232.33.8 NAS-Port = 1 NAS-Port-Type = Async Service-Type = Administrative-User # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] No EAP-Message, not doing EAP ++[eap] = noop [files] users: Matched entry test at line 2 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = updated +} # group authorize = updated Found Auth-Type = PAP # Executing group from file /etc/freeradius/sites-enabled/default +group PAP { [pap] login attempt with password "test" [pap] Using clear text password "test" [pap] User authenticated successfully ++[pap] = ok +} # group PAP = ok # Executing section post-auth from file /etc/freeradius/sites-enabled/default +group post-auth { ++[exec] = noop +} # group post-auth = noop Sending Access-Accept of id 243 to 131.232.33.8 port 44016 Service-Type = Administrative-User Finished request 0. Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 243 with timestamp +73 Ready to process requests. ------------- ssh test(a)131.232.33.8 Using security software from Mocana Corporation. Please visit https://www.mocana.com/ for more information Copyright(c) 2010-2022 Extreme Networks. All Rights Reserved. Virtual Services Platform 7200 VSP Operating System Software Build 8.8.0.0 General Availability Released Software, Fully supported This product is protected by one or more US patents listed at http://www.extremenetworks.com/patents along with their foreign counterparts. EXTREME NETWORKS VOSS COMMAND LINE INTERFACE test(a)131.232.33.8's password: Permission denied, please try again. test(a)131.232.33.8's password: ------ 1 2023-03-02T17:00:37.225-07:00 LAB7K902 CP1 - 0x000d8602 - 00000000 GlobalRouter SSH INFO SSH session closed by server for user test on host 131.232.90.103, session_id = 2 1 2023-03-02T17:00:37.225-07:00 LAB7K902 CP1 - 0x000d8602 - 00000000 GlobalRouter SSH INFO SSH authentication time expired for user test on host 131.232.90.103, session_id = 2 1 2023-03-02T17:00:23.615-07:00 LAB7K902 CP1 - 0x0004060b - 00000000 GlobalRouter WEB INFO SSL session with client 131.232.90.103 closed. 1 2023-03-02T16:59:40.417-07:00 LAB7K902 CP1 - 0x000d8602 - 00000000 GlobalRouter SSH INFO SSH invalid username/password for user test on host 131.232.90.103, session_id = 2 1 2023-03-02T16:59:40.417-07:00 LAB7K902 CP1 - 0x000a45fc - 00000000 GlobalRouter RADIUS INFO Radius message: 1 2023-03-02T16:59:40.417-07:00 LAB7K902 CP1 - 0x000a45c0 - 00000000 GlobalRouter RADIUS INFO RADIUS authentication failed on server 131.232.33.170 1 2023-03-02T16:59:40.417-07:00 LAB7K902 CP1 - 0x000a45fc - 00000000 GlobalRouter RADIUS INFO Radius message: Thank you, Shamsher

6 11

Re: Auth failed accounts and write to SQL database
by Steven Walters 24 Mar '23

24 Mar '23

Thanks for the information provided Matthew. I got it working. I have however a slight challenge when trying to set the Class attribute instead of updating the database, as suggested. In the Access-Accept I set the Class attribute equal to reject which works fine in the case where we have our own BNGs. The value I set is the value I receive from the BNG in the Accounting-Start message. However, where we consume network services where we don't use our own BNG, the PPPoE gets proxied to us by the access provider's RADIUS. Whatever value we set in the Class they will encode to hex, add IXX and then encode to hex again. For example, if I set Class = reject, I receive: 0x4958583078373236353661363536333734 When I do string:Class I get: IXX0x72656a656374 Using a calculator, if I convert 0x72656a656374 from hex to string I get the value reject. Using the below I am trying to extract 0x72656a656374 from IXX0x72656a656374 which I write to Tmp-String-2 and then apply string to Tmp-String-3. However I end up with Tmp-String-3 = 0x72656a656374 but would like the original value (reject) I set in the Access-Accept message. if ("%{string:Class}" =~ /(IXX)(0x[0-9a-f]{12})/) { update request { &Tmp-String-2 := "%{2}" &Tmp-String-3 := "%{string:Tmp-String-2}" } }

3 2

Questions on Free Radius with Shared Secret and special characters
by Tammy Dore 23 Mar '23

23 Mar '23

Hi, We upgraded from a previous version of Free Radius v3.0.19. Recently we have had some complains that some special characters which used to work in our previous release, no longer work. So far I have discovered that these special characters do not work: , ; ' So which known special characters are not supported? Do I need to use an escape sequence in front of the special character to make it work? I saw a blog that mentioned the correct_escapes setting in radiusd.conf can be used to correct the problem with special characters. So does setting correct_escapes = false, will that allow a secret with "testing123\," to work? Thank you! -Tammy Dore WARNING - CONFIDENTIAL INFORMATION: ________________________________ This message may contain confidential and privileged information. If it has been sent to you in error, please reply to advise the sender of the error and then immediately delete it. If you are not the intended recipient, do not read, copy, disclose or otherwise use this message. The sender disclaims any liability for such unauthorized use. NOTE that all incoming emails sent to Forescout email accounts will be archived and may be scanned by us and/or by external service providers to detect and prevent threats to our systems, investigate illegal or inappropriate behavior, and/or eliminate unsolicited promotional emails ("spam"). If you have any concerns about this process, please contact us privacy(a)forescout.com.

3 4

Need custom attribute for mark session contains free data consumption policy
by Imdad Hasan 23 Mar '23

23 Mar '23

Hi All, Which FreeRADIUS attribute I can use to mark the session contains a free data consumption policy, meaning I want to set one attribute with value for the mark session for any reason like free data or expired subscriber. and also want that attribute in accounting packet. Also want to change that attribute value with CoA. Please suggest any attribute that all NAS will supports for CoA as well. Thanks Imdad

2 1

EAP PEAP issues
by Matt H 22 Mar '23

22 Mar '23

Hello, Working getting FreeRadius talking to a WPA2 Enterprise network. At this time, having gone through the instructions: This command (local user in ..users) works great: radtest -t mschap bob hello 127.0.0.1:18120 0 testing123 Comes right back with 'hello bob' as it should. So presumably mschap is working at some level, and Windows connects to it without much fuss and bother. This command doesn't: radtest -t mschap farhadtest Rambo5201 127.0.0.1:18120 0 testing123 It tries to auth against ldap, is *not* working from the CLI, and Windows can't connect (obviously). Is mschap even working? It looks like it is, but something else is misconfigured that's blocking external auth. Radius -X output is below, with a successful and unsuccessful auth. here are questions. - I thought I had configured this to talk to our ldap host as I've done with others, and yet it's ignoring the ldap module. I'm trying to ID where I missed it in the configuration.... - It's not doing EAP on either authentication, and I don't know why. I've configured it from scratch with the instructions, and it's close but no cigar so far. Why is EAP a noop? It looks like it's configured in both default and inner-tunnel.... Thanks in advance for any thoughts about where I screwed up. /matt Output starts here: root@ipa-2 ~]# cd /etc/raddb/certs [root@ipa-2 certs]# radiusd -X FreeRADIUS Version 3.0.20 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/rfc7542 including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localnet { ipaddr = 172.18.0.0/22 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "mschapv2" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/star.hq.company.com.key" certificate_file = "/etc/raddb/certs/star.hq.company.com.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "PROFILE=SYSTEM" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.2" cache { enable = no lifetime = 24 name = "EAP-TLS" max_entries = 255 persist_dir = "/var/log/radius/tlscache" } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:336 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 54974 Listening on proxy address :: port 60522 Ready to process requests (0) Received Access-Request Id 238 from 127.0.0.1:47591 to 127.0.0.1:18120 length 136 (0) User-Name = "farhadtest" (0) NAS-IP-Address = 172.18.0.12 (0) NAS-Port = 0 (0) Message-Authenticator = 0x8f6c343304c6441d398626dbb91e347f (0) MS-CHAP-Challenge = 0x609a0b5fd29edcea (0) MS-CHAP-Response = 0x00010000000000000000000000000000000000000000000000008c574fdae3a772e5ad70dbdbfc34da98a3e1c2e46539d5cd (0) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [chap] = noop (0) mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap' (0) [mschap] = ok (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "farhadtest", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) update control { (0) &Proxy-To-Realm := LOCAL (0) } # update control = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop (0) [expiration] = noop (0) [logintime] = noop (0) [pap] = noop (0) } # authorize = ok (0) Found Auth-Type = mschap (0) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (0) authenticate { (0) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (0) mschap: Client is using MS-CHAPv1 with NT-Password (0) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication (0) mschap: ERROR: MS-CHAP2-Response is incorrect (0) [mschap] = reject (0) } # authenticate = reject (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (0) Post-Auth-Type REJECT { (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> farhadtest (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) update outer.session-state { (0) ERROR: Mapping "&request:Module-Failure-Message" -> "&Module-Failure-Message" invalid in this context (0) } # update outer.session-state = invalid (0) } # Post-Auth-Type REJECT = invalid (0) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 238 from 127.0.0.1:18120 to 127.0.0.1:47591 length 61 (0) MS-CHAP-Error = "\000E=691 R=1 C=42f22d247a3b3e6b V=2" Waking up in 3.9 seconds. (0) Cleaning up request packet ID 238 with timestamp +21 Ready to process requests (1) Received Access-Request Id 141 from 127.0.0.1:51765 to 127.0.0.1:18120 length 129 (1) User-Name = "bob" (1) NAS-IP-Address = 172.18.0.12 (1) NAS-Port = 0 (1) Message-Authenticator = 0x0f95709f202fa16671e8d1f91585cb82 (1) MS-CHAP-Challenge = 0x49f1591d819ab826 (1) MS-CHAP-Response = 0x00010000000000000000000000000000000000000000000000003a3a5f748b0596d42cf056151b27231e3124e90f4391e987 (1) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [chap] = noop (1) mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap' (1) [mschap] = ok (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "bob", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) update control { (1) &Proxy-To-Realm := LOCAL (1) } # update control = noop (1) eap: No EAP-Message, not doing EAP (1) [eap] = noop (1) files: users: Matched entry bob at line 87 (1) files: EXPAND Hello, %{User-Name} (1) files: --> Hello, bob (1) [files] = ok (1) [expiration] = noop (1) [logintime] = noop (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = ok (1) Found Auth-Type = mschap (1) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (1) authenticate { (1) mschap: Found Cleartext-Password, hashing to create NT-Password (1) mschap: Client is using MS-CHAPv1 with NT-Password (1) mschap: adding MS-CHAPv1 MPPE keys (1) [mschap] = ok (1) } # authenticate = ok (1) # Executing section post-auth from file /etc/raddb/sites-enabled/inner-tunnel (1) post-auth { (1) if (0) { (1) if (0) -> FALSE (1) } # post-auth = noop (1) Sent Access-Accept Id 141 from 127.0.0.1:18120 to 127.0.0.1:51765 length 0 (1) Reply-Message = "Hello, bob" (1) MS-CHAP-MPPE-Keys = 0x0000000000000000ac0782e2de2337dee40e54ee732c1af5 (1) MS-MPPE-Encryption-Policy = Encryption-Allowed (1) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (1) Finished request Waking up in 4.9 seconds. (1) Cleaning up request packet ID 141 with timestamp +37 Ready to process request

5 8

IKEv2 VPN clients and 2FA
by Markus Winkler 22 Mar '23

22 Mar '23

Hi all, I hope I may ask you regarding this topic. I have a test setup of OPNsense firewall, FreeRADIUS 3.2.0 and using Linux, Mac and especially Windows 10 (with the native Windows client) IKEv2 VPN clients. OPNsense / Phase 1 is configured to use EAP-RADIUS (i.e. FreeRADIUS) which is authenticating the VPN users against Active Directory. The VPN clients are using IKEv2 and EAP-MSCHAPv2 with (AD-) username and password. I use winbind for authentication (https://wiki.freeradius.org/guide/Active-Directory-direct-via-winbind) and do an additional check if the user is member of a special AD group (via LDAP). These are the key points. And so far it's working fine. But: I have the demand to use 2FA (especially OTP) to increase the security of the VPN access. And that's my very question: I searched around, read tons of articles etc. if that's possible and if yes, what would be the best way to achive this goal. Among others I found this: https://wiki.freeradius.org/guide/2FA-Active-Directory-plus-Proxy and would like to ask if someone has such an environment with Windows 10 clients and used it with e.g. privacyIDEA, OpenOTP or similar systems (other than the mentioned Gemalto Safenet Authentication Services)? It would be the best if the OTP system is running on-prem. Could this work and is it worth the effort to setup such a system? Any feedback is highly appreciated. Thank you and best regards, Markus

4 5

question about google workspace with multiple domains
by Wessel Louwris 22 Mar '23

22 Mar '23

Hello, I hope we can get some advice regarding a google workspace environment with a lot (30+) of domain names in it (units/companies in our network each using their own domain name). We have a working test setup with a few domains, but I’m wondering if my configuration is right. It’s a freeradius 3.2 environment based on the google sample files (mods-available/ldap_google + sites-available/google-ldap-auth) with the adviced cache settings etc. We are deploying the TTLS+PAP profiles + CA cert via our mdm platform and it all works with the different google email addresses as username, second lookup is cached etc so thats all very nice. For this setup we created a copy of the ldap_google module for each domain, because we need different base_dn’s. (that’s what I found when testing ldapsearch command’s, and I found a few guides setting up freeradius like this) And then some logic in the default site + inner tunnel to use these specific ldap auth types based on Stripped-User-Domain But now for each domain freeradius will create a connection pool with some binds to google (start pool=5). So my question is: will we run into issues for creating 5 * 30 connections to google in freeradius? Maybe we are doing it all wrong and there's a much smarter configuration possible? I included the debug log below (with a domain1.nl <http://domain1.nl/>, domain2.com <http://domain2.com/> after some replacements). Slightly unrelated question: we now deploy the CA certificate via our mdm, as per the documentation as far as I understood, but the user still needs to approve the server certificate (which makes sense) Is it safe to deploy the server certificate also to make it easier for our users, or is this a very bad idea. thanks, Wessel FreeRADIUS Version 3.2.2 Copyright (C) 1999-2022 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/totp including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/cache_auth including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/domain2.com including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/domain1.nl including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/unix including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/rfc7542 including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/filter including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/google-ldap-auth main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { nonblock = no ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } recv_coa { } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm domain2.com { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client vpn { ipaddr = 172.16.34.0/24 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client heli { ipaddr = 172.16.210.0/24 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = domain2.com # Creating Auth-Type = domain1.nl # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_totp # Loading module "totp" from file /etc/freeradius/mods-enabled/totp # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_cache # Loading module "cache_auth_accept" from file /etc/freeradius/mods-enabled/cache_auth cache cache_auth_accept { driver = "rlm_cache_rbtree" key = "%{md5:%{%{Stripped-User-Name}:-%{User-Name}}%{User-Password}}" ttl = 7200 max_entries = 0 epoch = 0 add_stats = no } # Loading module "cache_auth_reject" from file /etc/freeradius/mods-enabled/cache_auth cache cache_auth_reject { driver = "rlm_cache_rbtree" key = "%{md5:%{Calling-Station-Id}%{Stripped-User-Name}%{User-Password}}" ttl = 3600 max_entries = 0 epoch = 0 add_stats = no } # Loading module "cache_ldap_user_dn" from file /etc/freeradius/mods-enabled/cache_auth cache cache_ldap_user_dn { driver = "rlm_cache_rbtree" key = "%{Stripped-User-Name}" ttl = 86400 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_ldap # Loading module "domain2.com" from file /etc/freeradius/mods-enabled/domain2.com ldap domain2.com { server = "ldaps://ldap.google.com:636/" identity = "EnchantedC" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { scope = "sub" base_dn = "" } profile { } options { ldap_debug = 0 chase_referrals = no net_timeout = 3 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { certificate_file = "/etc/freeradius/certs/ldap-client.crt" private_key_file = "/etc/freeradius/certs/ldap-client.key" start_tls = no require_cert = "allow" } } Creating attribute domain2.com-LDAP-Group # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "domain1.nl" from file /etc/freeradius/mods-enabled/domain1.nl ldap domain1.nl { server = "ldaps://ldap.google.com:636/" identity = "EnchantedC" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { scope = "sub" base_dn = "" } profile { } options { ldap_debug = 0 chase_referrals = no net_timeout = 3 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { certificate_file = "/etc/freeradius/certs/ldap-client.crt" private_key_file = "/etc/freeradius/certs/ldap-client.key" start_tls = no require_cert = "allow" } } Creating attribute domain1.nl-LDAP-Group # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group instantiate { } # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "cache_auth_accept" from file /etc/freeradius/mods-enabled/cache_auth rlm_cache (cache_auth_accept): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "cache_auth_reject" from file /etc/freeradius/mods-enabled/cache_auth rlm_cache (cache_auth_reject): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "cache_ldap_user_dn" from file /etc/freeradius/mods-enabled/cache_auth rlm_cache (cache_ldap_user_dn): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "gtc" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "domain2.com" from file /etc/freeradius/mods-enabled/domain2.com rlm_ldap: libldap vendor: OpenLDAP, version: 20513 rlm_ldap (domain2.com) Couldn't find configuration for accounting, will return NOOP for calls from this section rlm_ldap (domain2.com) Couldn't find configuration for post-auth, will return NOOP for calls from this section rlm_ldap (domain2.com) Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (domain2.com) Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (domain2.com) Connecting to ldaps://ldap.google.com:636 rlm_ldap (domain2.com) Waiting for bind result... rlm_ldap (domain2.com) Bind successful rlm_ldap (domain2.com) Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (domain2.com) Connecting to ldaps://ldap.google.com:636 rlm_ldap (domain2.com) Waiting for bind result... rlm_ldap (domain2.com) Bind successful rlm_ldap (domain2.com) Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (domain2.com) Connecting to ldaps://ldap.google.com:636 rlm_ldap (domain2.com) Waiting for bind result... rlm_ldap (domain2.com) Bind successful rlm_ldap (domain2.com) Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (domain2.com) Connecting to ldaps://ldap.google.com:636 rlm_ldap (domain2.com) Waiting for bind result... rlm_ldap (domain2.com) Bind successful rlm_ldap (domain2.com) Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (domain2.com) Connecting to ldaps://ldap.google.com:636 rlm_ldap (domain2.com) Waiting for bind result... rlm_ldap (domain2.com) Bind successful # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "domain1.nl" from file /etc/freeradius/mods-enabled/domain1.nl rlm_ldap (domain1.nl): Couldn't find configuration for accounting, will return NOOP for calls from this section rlm_ldap (domain1.nl): Couldn't find configuration for post-auth, will return NOOP for calls from this section rlm_ldap (domain1.nl): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (domain1.nl): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (domain1.nl): Connecting to ldaps://ldap.google.com:636 rlm_ldap (domain1.nl): Waiting for bind result... rlm_ldap (domain1.nl): Bind successful rlm_ldap (domain1.nl): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (domain1.nl): Connecting to ldaps://ldap.google.com:636 rlm_ldap (domain1.nl): Waiting for bind result... rlm_ldap (domain1.nl): Bind successful rlm_ldap (domain1.nl): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (domain1.nl): Connecting to ldaps://ldap.google.com:636 rlm_ldap (domain1.nl): Waiting for bind result... rlm_ldap (domain1.nl): Bind successful rlm_ldap (domain1.nl): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (domain1.nl): Connecting to ldaps://ldap.google.com:636 rlm_ldap (domain1.nl): Waiting for bind result... rlm_ldap (domain1.nl): Bind successful rlm_ldap (domain1.nl): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (domain1.nl): Connecting to ldaps://ldap.google.com:636 rlm_ldap (domain1.nl): Waiting for bind result... rlm_ldap (domain1.nl): Bind successful # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/coa } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type Compiling Auth-Type domain2.com for attr Auth-Type Compiling Auth-Type domain1.nl for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default server inner-tunnel { # from file /etc/freeradius/sites-enabled/google-ldap-auth # Loading authenticate {...} Compiling Auth-Type domain2.com for attr Auth-Type Compiling Auth-Type domain1.nl for attr Auth-Type # Loading authorize {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18123 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18123 bound to server inner-tunnel Listening on proxy address * port 54756 Listening on proxy address :: port 53532 Ready to process requests (0) Received Access-Request Id 0 from 172.16.34.15:62720 to 172.16.30.16:1812 length 89 (0) User-Name = "username1(a)domain1.nl" (0) EAP-Message = 0x024d001a0162697477617264656e40656c656d656e74732e6e6c (0) Message-Authenticator = 0x924b31fbcdaf3368fb66154fdad66ddd (0) # Executing section authorize from file /etc/freeradius/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "domain1.nl" for User-Name = "username1(a)domain1.nl" (0) suffix: No such realm "domain1.nl" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 77 length 26 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: (TLS) Initiating new session (0) eap: Sending EAP Request (code 1) ID 78 length 6 (0) eap: EAP session adding &reply:State = 0xc29460d5c2da7560 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) session-state: Saving cached attributes (0) Framed-MTU = 994 (0) Sent Access-Challenge Id 0 from 172.16.30.16:1812 to 172.16.34.15:62720 length 64 (0) EAP-Message = 0x014e00061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xc29460d5c2da7560815f75a5e2aa24d4 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 1 from 172.16.34.15:62720 to 172.16.30.16:1812 length 277 (1) User-Name = "username1(a)domain1.nl" (1) EAP-Message = 0x024e00c4150016030100b9010000b50303b28a30e920bf7d3cd03bbf9f7c06246044b881624778b27597f2c696fa9ba999000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff01000054000b000403000102000a000c000a001d0017001e001900180016000000170000000d0030002e040305030603080708080809080a080b080408050806040105010601030302030301020103020202040205020602 (1) State = 0xc29460d5c2da7560815f75a5e2aa24d4 (1) Message-Authenticator = 0xc9a84bd82761e256c1c4dbf84cfb03e8 (1) Restoring &session-state (1) &session-state:Framed-MTU = 994 (1) # Executing section authorize from file /etc/freeradius/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: Looking up realm "domain1.nl" for User-Name = "username1(a)domain1.nl" (1) suffix: No such realm "domain1.nl" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 78 length 196 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xc29460d5c2da7560 (1) eap: Finished EAP session with state 0xc29460d5c2da7560 (1) eap: Previous EAP request found for state 0xc29460d5c2da7560, released from the list (1) eap: Peer sent packet with method EAP TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Authenticate (1) eap_ttls: (TLS) EAP Got final fragment (190 bytes) (1) eap_ttls: WARNING: (TLS) EAP Total received record fragments (190 bytes), does not equal expected expected data length (0 bytes) (1) eap_ttls: (TLS) EAP Done initial handshake (1) eap_ttls: (TLS) Handshake state - before SSL initialization (1) eap_ttls: (TLS) Handshake state - Server before SSL initialization (1) eap_ttls: (TLS) Handshake state - Server before SSL initialization (1) eap_ttls: (TLS) recv TLS 1.3 Handshake, ClientHello (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client hello (1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerHello (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server hello (1) eap_ttls: (TLS) send TLS 1.2 Handshake, Certificate (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write certificate (1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerKeyExchange (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write key exchange (1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerHelloDone (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server done (1) eap_ttls: (TLS) Server : Need to read more data: SSLv3/TLS write server done (1) eap_ttls: (TLS) In Handshake Phase (1) eap: Sending EAP Request (code 1) ID 79 length 1004 (1) eap: EAP session adding &reply:State = 0xc29460d5c3db7560 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) session-state: Saving cached attributes (1) Framed-MTU = 994 (1) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (1) Sent Access-Challenge Id 1 from 172.16.30.16:1812 to 172.16.34.15:62720 length 1068 (1) EAP-Message = 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 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xc29460d5c3db7560815f75a5e2aa24d4 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 2 from 172.16.34.15:62720 to 172.16.30.16:1812 length 87 (2) User-Name = "username1(a)domain1.nl" (2) EAP-Message = 0x024f00061500 (2) State = 0xc29460d5c3db7560815f75a5e2aa24d4 (2) Message-Authenticator = 0x0bf05d1495d0e21733d2fac8185db98c (2) Restoring &session-state (2) &session-state:Framed-MTU = 994 (2) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (2) # Executing section authorize from file /etc/freeradius/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: Looking up realm "domain1.nl" for User-Name = "username1(a)domain1.nl" (2) suffix: No such realm "domain1.nl" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 79 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xc29460d5c3db7560 (2) eap: Finished EAP session with state 0xc29460d5c3db7560 (2) eap: Previous EAP request found for state 0xc29460d5c3db7560, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: (TLS) Peer ACKed our handshake fragment (2) eap: Sending EAP Request (code 1) ID 80 length 1004 (2) eap: EAP session adding &reply:State = 0xc29460d5c0c47560 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) session-state: Saving cached attributes (2) Framed-MTU = 994 (2) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (2) Sent Access-Challenge Id 2 from 172.16.30.16:1812 to 172.16.34.15:62720 length 1068 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xc29460d5c0c47560815f75a5e2aa24d4 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 3 from 172.16.34.15:62720 to 172.16.30.16:1812 length 87 (3) User-Name = "username1(a)domain1.nl" (3) EAP-Message = 0x025000061500 (3) State = 0xc29460d5c0c47560815f75a5e2aa24d4 (3) Message-Authenticator = 0x2994df92e73351a9a7ceaa99fff911de (3) Restoring &session-state (3) &session-state:Framed-MTU = 994 (3) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (3) # Executing section authorize from file /etc/freeradius/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: Looking up realm "domain1.nl" for User-Name = "username1(a)domain1.nl" (3) suffix: No such realm "domain1.nl" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 80 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xc29460d5c0c47560 (3) eap: Finished EAP session with state 0xc29460d5c0c47560 (3) eap: Previous EAP request found for state 0xc29460d5c0c47560, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: (TLS) Peer ACKed our handshake fragment (3) eap: Sending EAP Request (code 1) ID 81 length 801 (3) eap: EAP session adding &reply:State = 0xc29460d5c1c57560 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) session-state: Saving cached attributes (3) Framed-MTU = 994 (3) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (3) Sent Access-Challenge Id 3 from 172.16.30.16:1812 to 172.16.34.15:62720 length 865 (3) EAP-Message = 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 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xc29460d5c1c57560815f75a5e2aa24d4 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 4 from 172.16.34.15:62720 to 172.16.30.16:1812 length 180 (4) User-Name = "username1(a)domain1.nl" (4) EAP-Message = 0x02510063150016030300251000002120588648109af8a5e51b1679f9350140be9ccc7ff351f62e2bc6f5c15c8d730c191403030001011603030028042c2927f308d8fc554e9e82e1a382dc4c6fee9a8067b20da851510fb409e6d1e1b3273cfa8e7357 (4) State = 0xc29460d5c1c57560815f75a5e2aa24d4 (4) Message-Authenticator = 0x9f8af3aa503ac34704f847f457523f69 (4) Restoring &session-state (4) &session-state:Framed-MTU = 994 (4) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (4) # Executing section authorize from file /etc/freeradius/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: Looking up realm "domain1.nl" for User-Name = "username1(a)domain1.nl" (4) suffix: No such realm "domain1.nl" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 81 length 99 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xc29460d5c1c57560 (4) eap: Finished EAP session with state 0xc29460d5c1c57560 (4) eap: Previous EAP request found for state 0xc29460d5c1c57560, released from the list (4) eap: Peer sent packet with method EAP TTLS (21) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: Authenticate (4) eap_ttls: (TLS) EAP Done initial handshake (4) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server done (4) eap_ttls: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange (4) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client key exchange (4) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read change cipher spec (4) eap_ttls: (TLS) recv TLS 1.2 Handshake, Finished (4) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read finished (4) eap_ttls: (TLS) send TLS 1.2 ChangeCipherSpec (4) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec (4) eap_ttls: (TLS) send TLS 1.2 Handshake, Finished (4) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write finished (4) eap_ttls: (TLS) Handshake state - SSL negotiation finished successfully (4) eap_ttls: (TLS) Connection Established (4) eap_ttls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (4) eap_ttls: TLS-Session-Version = "TLS 1.2" (4) eap: Sending EAP Request (code 1) ID 82 length 61 (4) eap: EAP session adding &reply:State = 0xc29460d5c6c67560 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) session-state: Saving cached attributes (4) Framed-MTU = 994 (4) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (4) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (4) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (4) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (4) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (4) TLS-Session-Version = "TLS 1.2" (4) Sent Access-Challenge Id 4 from 172.16.30.16:1812 to 172.16.34.15:62720 length 119 (4) EAP-Message = 0x0152003d1580000000331403030001011603030028d59c7e52c3a5c7cff6ba7584017a46fd28736ee36bd2e48b1a07a6bcb5c34c44fa57303bc88acc3a (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xc29460d5c6c67560815f75a5e2aa24d4 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 5 from 172.16.34.15:62720 to 172.16.30.16:1812 length 188 (5) User-Name = "username1(a)domain1.nl" (5) EAP-Message = 0x0252006b15001703030060042c2927f308d8fd2b8da47fea15bf07dba5612cdca96c6b017330eddd326004fa28fe1b5c6148041e410dc435d49082269853ff46966906bcfd06aca363a15630326627303f5a416a42a7ffec69cd762e5d20b02a0b71ca8e332c67b1f3e21c (5) State = 0xc29460d5c6c67560815f75a5e2aa24d4 (5) Message-Authenticator = 0x647a3a813bfd955b6fc101756170154d (5) Restoring &session-state (5) &session-state:Framed-MTU = 994 (5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (5) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) &session-state:TLS-Session-Version = "TLS 1.2" (5) # Executing section authorize from file /etc/freeradius/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: Looking up realm "domain1.nl" for User-Name = "username1(a)domain1.nl" (5) suffix: No such realm "domain1.nl" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 82 length 107 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xc29460d5c6c67560 (5) eap: Finished EAP session with state 0xc29460d5c6c67560 (5) eap: Previous EAP request found for state 0xc29460d5c6c67560, released from the list (5) eap: Peer sent packet with method EAP TTLS (21) (5) eap: Calling submodule eap_ttls to process data (5) eap_ttls: Authenticate (5) eap_ttls: (TLS) EAP Done initial handshake (5) eap_ttls: Session established. Proceeding to decode tunneled attributes (5) eap_ttls: Got tunneled request (5) eap_ttls: User-Name = "username1(a)domain1.nl" (5) eap_ttls: User-Password = "passwdpasswd" (5) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (5) eap_ttls: Sending tunneled request (5) Virtual server inner-tunnel received request (5) User-Name = "username1(a)domain1.nl" (5) User-Password = "passwdpasswd" (5) FreeRADIUS-Proxied-To = 127.0.0.1 (5) WARNING: Outer and inner identities are the same. User privacy is compromised. (5) server inner-tunnel { (5) # Executing section authorize from file /etc/freeradius/sites-enabled/google-ldap-auth (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) policy filter_inner_identity { (5) if (!&outer.request:User-Name || !&User-Name) { (5) if (!&outer.request:User-Name || !&User-Name) -> FALSE (5) if (&outer.request:User-Name != &User-Name) { (5) if (&outer.request:User-Name != &User-Name) -> FALSE (5) } # policy filter_inner_identity = notfound (5) policy split_username_nai { (5) if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) { (5) if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) -> TRUE (5) if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) { (5) update request { (5) EXPAND %{1} (5) --> username1 (5) &Stripped-User-Name := username1 (5) } # update request = noop (5) if ("%{3}" != '') { (5) EXPAND %{3} (5) --> domain1.nl (5) if ("%{3}" != '') -> TRUE (5) if ("%{3}" != '') { (5) update request { (5) EXPAND %{3} (5) --> domain1.nl (5) &Stripped-User-Domain = domain1.nl (5) } # update request = noop (5) } # if ("%{3}" != '') = noop (5) [updated] = updated (5) } # if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) = updated (5) ... skipping else: Preceding "if" was taken (5) } # policy split_username_nai = updated (5) update control { (5) &Cache-Status-Only := yes (5) } # update control = noop (5) cache_auth_accept: EXPAND %{md5:%{%{Stripped-User-Name}:-%{User-Name}}%{User-Password}} (5) cache_auth_accept: --> e3d72cd4af4d400654dba54caa15830a (5) cache_auth_accept: No cache entry found for "e3d72cd4af4d400654dba54caa15830a" (5) [cache_auth_accept] = notfound (5) if (ok) { (5) if (ok) -> FALSE (5) update control { (5) &Cache-Status-Only := yes (5) } # update control = noop (5) cache_auth_reject: EXPAND %{md5:%{Calling-Station-Id}%{Stripped-User-Name}%{User-Password}} (5) cache_auth_reject: --> e3d72cd4af4d400654dba54caa15830a (5) cache_auth_reject: No cache entry found for "e3d72cd4af4d400654dba54caa15830a" (5) [cache_auth_reject] = notfound (5) if (ok) { (5) if (ok) -> FALSE (5) if (&User-Password && !control:Auth-Type) { (5) if (&User-Password && !control:Auth-Type) -> TRUE (5) if (&User-Password && !control:Auth-Type) { (5) if (&request:Stripped-User-Domain == 'domain2.com') { (5) if (&request:Stripped-User-Domain == 'domain2.com') -> FALSE (5) if (&request:Stripped-User-Domain == 'domain1.nl') { (5) if (&request:Stripped-User-Domain == 'domain1.nl') -> TRUE (5) if (&request:Stripped-User-Domain == 'domain1.nl') { (5) update control { (5) Auth-Type = domain1.nl (5) } # update control = noop (5) } # if (&request:Stripped-User-Domain == 'domain1.nl') = noop (5) update control { (5) &Cache-Read-Only := yes (5) } # update control = noop (5) cache_ldap_user_dn: EXPAND %{Stripped-User-Name} (5) cache_ldap_user_dn: --> username1 (5) cache_ldap_user_dn: No cache entry found for "username1" (5) [cache_ldap_user_dn] = notfound (5) } # if (&User-Password && !control:Auth-Type) = noop (5) } # authorize = updated (5) Found Auth-Type = domain1.nl (5) # Executing group from file /etc/freeradius/sites-enabled/google-ldap-auth (5) Auth-Type domain1.nl { rlm_ldap (domain1.nl): Reserved connection (0) (5) domain1.nl: Login attempt by "username1" (5) domain1.nl: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (5) domain1.nl: --> (uid=username1) (5) domain1.nl: Performing search in "ou=Users,dc=domain1,dc=nl" with filter "(uid=username1)", scope "sub" (5) domain1.nl: Waiting for search result... (5) domain1.nl: User object found at DN "uid=username1,ou=Makerstreet Testing,ou=Users,dc=domain1,dc=nl" (5) domain1.nl: Waiting for bind result... (5) domain1.nl: Bind successful (5) domain1.nl: Bind as user "uid=username1,ou=Makerstreet Testing,ou=Users,dc=domain1,dc=nl" was successful rlm_ldap (domain1.nl): Released connection (0) Need more connections to reach 10 spares rlm_ldap (domain1.nl): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (domain1.nl): Connecting to ldaps://ldap.google.com:636 rlm_ldap (domain1.nl): Waiting for bind result... rlm_ldap (domain1.nl): Bind successful (5) [domain1.nl] = ok (5) } # Auth-Type domain1.nl = ok (5) # Executing section post-auth from file /etc/freeradius/sites-enabled/google-ldap-auth (5) post-auth { (5) cache_ldap_user_dn: EXPAND %{Stripped-User-Name} (5) cache_ldap_user_dn: --> username1 (5) cache_ldap_user_dn: No cache entry found for "username1" (5) cache_ldap_user_dn: Creating new cache entry (5) cache_ldap_user_dn: &control:LDAP-UserDN = &control:LDAP-UserDN -> 'uid=username1,ou=Makerstreet Testing,ou=Users,dc=domain1,dc=nl' (5) cache_ldap_user_dn: Merging cache entry into request (5) cache_ldap_user_dn: &control:LDAP-UserDN = "uid=username1,ou=Makerstreet Testing,ou=Users,dc=domain1,dc=nl" (5) cache_ldap_user_dn: Committed entry, TTL 86400 seconds (5) [cache_ldap_user_dn] = updated (5) if (&control:Auth-Type == domain2.com) { (5) if (&control:Auth-Type == domain2.com) -> FALSE (5) if (&control:Auth-Type == domain1.nl) { (5) if (&control:Auth-Type == domain1.nl) -> TRUE (5) if (&control:Auth-Type == domain1.nl) { (5) cache_auth_accept: EXPAND %{md5:%{%{Stripped-User-Name}:-%{User-Name}}%{User-Password}} (5) cache_auth_accept: --> e3d72cd4af4d400654dba54caa15830a (5) cache_auth_accept: No cache entry found for "e3d72cd4af4d400654dba54caa15830a" (5) cache_auth_accept: Creating new cache entry (5) cache_auth_accept: &control:User-Category = "success" (5) cache_auth_accept: Merging cache entry into request (5) cache_auth_accept: &control:User-Category = "success" (5) cache_auth_accept: Committed entry, TTL 7200 seconds (5) [cache_auth_accept] = updated (5) } # if (&control:Auth-Type == domain1.nl) = updated (5) } # post-auth = updated (5) } # server inner-tunnel (5) Virtual server sending reply (5) eap_ttls: Got tunneled Access-Accept (5) eap: Sending EAP Success (code 3) ID 82 length 4 (5) eap: Freeing handler (5) [eap] = ok (5) } # authenticate = ok (5) # Executing section post-auth from file /etc/freeradius/sites-enabled/default (5) post-auth { (5) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (5) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (5) update { (5) &reply::Framed-MTU += &session-state:Framed-MTU[*] -> 994 (5) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) recv TLS 1.3 Handshake, ClientHello' (5) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake, ServerHello' (5) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake, Certificate' (5) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake, ServerKeyExchange' (5) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake, ServerHelloDone' (5) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) recv TLS 1.2 Handshake, ClientKeyExchange' (5) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) recv TLS 1.2 Handshake, Finished' (5) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 ChangeCipherSpec' (5) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake, Finished' (5) &reply::TLS-Session-Cipher-Suite += &session-state:TLS-Session-Cipher-Suite[*] -> 'ECDHE-RSA-AES256-GCM-SHA384' (5) &reply::TLS-Session-Version += &session-state:TLS-Session-Version[*] -> 'TLS 1.2' (5) } # update = noop (5) [exec] = noop (5) policy remove_reply_message_if_eap { (5) if (&reply:EAP-Message && &reply:Reply-Message) { (5) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (5) else { (5) [noop] = noop (5) } # else = noop (5) } # policy remove_reply_message_if_eap = noop (5) if (EAP-Key-Name && &reply:EAP-Session-Id) { (5) if (EAP-Key-Name && &reply:EAP-Session-Id) -> FALSE (5) } # post-auth = noop (5) Sent Access-Accept Id 5 from 172.16.30.16:1812 to 172.16.34.15:62720 length 189 (5) MS-MPPE-Recv-Key = 0x7237ec2050304d532e229f6686bfcb47bcddcbc392dc9fe57f7bed09e639c3fd (5) MS-MPPE-Send-Key = 0x5b54dfdfadd54f0bff427d3b71dd4e0e15873488f095e2997982dd756bcff9b9 (5) EAP-Message = 0x03520004 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) User-Name = "username1(a)domain1.nl" (5) Framed-MTU += 994 (5) Finished request Waking up in 2.3 seconds. (0) Cleaning up request packet ID 0 with timestamp +9 due to cleanup_delay was reached (1) Cleaning up request packet ID 1 with timestamp +9 due to cleanup_delay was reached (2) Cleaning up request packet ID 2 with timestamp +9 due to cleanup_delay was reached (3) Cleaning up request packet ID 3 with timestamp +9 due to cleanup_delay was reached (4) Cleaning up request packet ID 4 with timestamp +9 due to cleanup_delay was reached Waking up in 2.5 seconds. (5) Cleaning up request packet ID 5 with timestamp +9 due to cleanup_delay was reached Ready to process requests (6) Received Access-Request Id 0 from 172.16.34.15:59333 to 172.16.30.16:1812 length 89 (6) User-Name = "username1(a)domain1.nl" (6) EAP-Message = 0x026d001a0162697477617264656e40656c656d656e74732e6e6c (6) Message-Authenticator = 0x70dcd544518ddc559e011116ba0656a7 (6) # Executing section authorize from file /etc/freeradius/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: Looking up realm "domain1.nl" for User-Name = "username1(a)domain1.nl" (6) suffix: No such realm "domain1.nl" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 109 length 26 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/sites-enabled/default (6) authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Calling submodule eap_ttls to process data (6) eap_ttls: (TLS) Initiating new session (6) eap: Sending EAP Request (code 1) ID 110 length 6 (6) eap: EAP session adding &reply:State = 0x578cf4fd57e2e100 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) session-state: Saving cached attributes (6) Framed-MTU = 994 (6) Sent Access-Challenge Id 0 from 172.16.30.16:1812 to 172.16.34.15:59333 length 64 (6) EAP-Message = 0x016e00061520 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x578cf4fd57e2e1004cc3c0867672f708 (6) Finished request Waking up in 4.9 seconds. (7) Received Access-Request Id 1 from 172.16.34.15:59333 to 172.16.30.16:1812 length 277 (7) User-Name = "username1(a)domain1.nl" (7) EAP-Message = 0x026e00c4150016030100b9010000b50303384ec7f883f50e356268be135976285e5eb12dbdf8b07b5978236f73e3d2d34b000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff01000054000b000403000102000a000c000a001d0017001e001900180016000000170000000d0030002e040305030603080708080809080a080b080408050806040105010601030302030301020103020202040205020602 (7) State = 0x578cf4fd57e2e1004cc3c0867672f708 (7) Message-Authenticator = 0x3fbd0dfe16c4dd49390e50a3c3eeb82c (7) Restoring &session-state (7) &session-state:Framed-MTU = 994 (7) # Executing section authorize from file /etc/freeradius/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: Looking up realm "domain1.nl" for User-Name = "username1(a)domain1.nl" (7) suffix: No such realm "domain1.nl" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 110 length 196 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x578cf4fd57e2e100 (7) eap: Finished EAP session with state 0x578cf4fd57e2e100 (7) eap: Previous EAP request found for state 0x578cf4fd57e2e100, released from the list (7) eap: Peer sent packet with method EAP TTLS (21) (7) eap: Calling submodule eap_ttls to process data (7) eap_ttls: Authenticate (7) eap_ttls: (TLS) EAP Got final fragment (190 bytes) (7) eap_ttls: WARNING: (TLS) EAP Total received record fragments (190 bytes), does not equal expected expected data length (0 bytes) (7) eap_ttls: (TLS) EAP Done initial handshake (7) eap_ttls: (TLS) Handshake state - before SSL initialization (7) eap_ttls: (TLS) Handshake state - Server before SSL initialization (7) eap_ttls: (TLS) Handshake state - Server before SSL initialization (7) eap_ttls: (TLS) recv TLS 1.3 Handshake, ClientHello (7) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client hello (7) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerHello (7) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server hello (7) eap_ttls: (TLS) send TLS 1.2 Handshake, Certificate (7) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write certificate (7) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerKeyExchange (7) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write key exchange (7) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerHelloDone (7) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server done (7) eap_ttls: (TLS) Server : Need to read more data: SSLv3/TLS write server done (7) eap_ttls: (TLS) In Handshake Phase (7) eap: Sending EAP Request (code 1) ID 111 length 1004 (7) eap: EAP session adding &reply:State = 0x578cf4fd56e3e100 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/freeradius/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) session-state: Saving cached attributes (7) Framed-MTU = 994 (7) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (7) Sent Access-Challenge Id 1 from 172.16.30.16:1812 to 172.16.34.15:59333 length 1068 (7) EAP-Message = 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 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x578cf4fd56e3e1004cc3c0867672f708 (7) Finished request Waking up in 4.9 seconds. (8) Received Access-Request Id 2 from 172.16.34.15:59333 to 172.16.30.16:1812 length 87 (8) User-Name = "username1(a)domain1.nl" (8) EAP-Message = 0x026f00061500 (8) State = 0x578cf4fd56e3e1004cc3c0867672f708 (8) Message-Authenticator = 0xa8b63ec72b98eeec75d4cafdb7affce2 (8) Restoring &session-state (8) &session-state:Framed-MTU = 994 (8) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (8) # Executing section authorize from file /etc/freeradius/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: Looking up realm "domain1.nl" for User-Name = "username1(a)domain1.nl" (8) suffix: No such realm "domain1.nl" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 111 length 6 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x578cf4fd56e3e100 (8) eap: Finished EAP session with state 0x578cf4fd56e3e100 (8) eap: Previous EAP request found for state 0x578cf4fd56e3e100, released from the list (8) eap: Peer sent packet with method EAP TTLS (21) (8) eap: Calling submodule eap_ttls to process data (8) eap_ttls: Authenticate (8) eap_ttls: (TLS) Peer ACKed our handshake fragment (8) eap: Sending EAP Request (code 1) ID 112 length 1004 (8) eap: EAP session adding &reply:State = 0x578cf4fd55fce100 (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /etc/freeradius/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) session-state: Saving cached attributes (8) Framed-MTU = 994 (8) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (8) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (8) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (8) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (8) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (8) Sent Access-Challenge Id 2 from 172.16.30.16:1812 to 172.16.34.15:59333 length 1068 (8) EAP-Message = 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 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x578cf4fd55fce1004cc3c0867672f708 (8) Finished request Waking up in 4.9 seconds. (9) Received Access-Request Id 3 from 172.16.34.15:59333 to 172.16.30.16:1812 length 87 (9) User-Name = "username1(a)domain1.nl" (9) EAP-Message = 0x027000061500 (9) State = 0x578cf4fd55fce1004cc3c0867672f708 (9) Message-Authenticator = 0xa011c98ebc2752852bc7f2b0d8f7bd55 (9) Restoring &session-state (9) &session-state:Framed-MTU = 994 (9) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (9) # Executing section authorize from file /etc/freeradius/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: Looking up realm "domain1.nl" for User-Name = "username1(a)domain1.nl" (9) suffix: No such realm "domain1.nl" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 112 length 6 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x578cf4fd55fce100 (9) eap: Finished EAP session with state 0x578cf4fd55fce100 (9) eap: Previous EAP request found for state 0x578cf4fd55fce100, released from the list (9) eap: Peer sent packet with method EAP TTLS (21) (9) eap: Calling submodule eap_ttls to process data (9) eap_ttls: Authenticate (9) eap_ttls: (TLS) Peer ACKed our handshake fragment (9) eap: Sending EAP Request (code 1) ID 113 length 801 (9) eap: EAP session adding &reply:State = 0x578cf4fd54fde100 (9) [eap] = handled (9) } # authenticate = handled (9) Using Post-Auth-Type Challenge (9) # Executing group from file /etc/freeradius/sites-enabled/default (9) Challenge { ... } # empty sub-section is ignored (9) session-state: Saving cached attributes (9) Framed-MTU = 994 (9) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (9) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (9) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (9) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (9) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (9) Sent Access-Challenge Id 3 from 172.16.30.16:1812 to 172.16.34.15:59333 length 865 (9) EAP-Message = 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 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0x578cf4fd54fde1004cc3c0867672f708 (9) Finished request Waking up in 4.9 seconds. (10) Received Access-Request Id 4 from 172.16.34.15:59333 to 172.16.30.16:1812 length 180 (10) User-Name = "username1(a)domain1.nl" (10) EAP-Message = 0x027100631500160303002510000021202b3e3ad8ba48d0d8b2c3e39abcc373a501877f38ee24030c3baa7312ca25802314030300010116030300281aad71a9f03680fba7ad6cd36cb112f3245dd6eacfc2a21db6d986d8cf1d3fd0a6028cbd81a8b5f7 (10) State = 0x578cf4fd54fde1004cc3c0867672f708 (10) Message-Authenticator = 0xbddb97fbf1adb271694bdd6b88850f5d (10) Restoring &session-state (10) &session-state:Framed-MTU = 994 (10) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (10) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (10) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (10) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (10) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (10) # Executing section authorize from file /etc/freeradius/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: Looking up realm "domain1.nl" for User-Name = "username1(a)domain1.nl" (10) suffix: No such realm "domain1.nl" (10) [suffix] = noop (10) eap: Peer sent EAP Response (code 2) ID 113 length 99 (10) eap: Continuing tunnel setup (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = eap (10) # Executing group from file /etc/freeradius/sites-enabled/default (10) authenticate { (10) eap: Expiring EAP session with state 0x578cf4fd54fde100 (10) eap: Finished EAP session with state 0x578cf4fd54fde100 (10) eap: Previous EAP request found for state 0x578cf4fd54fde100, released from the list (10) eap: Peer sent packet with method EAP TTLS (21) (10) eap: Calling submodule eap_ttls to process data (10) eap_ttls: Authenticate (10) eap_ttls: (TLS) EAP Done initial handshake (10) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server done (10) eap_ttls: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange (10) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client key exchange (10) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read change cipher spec (10) eap_ttls: (TLS) recv TLS 1.2 Handshake, Finished (10) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read finished (10) eap_ttls: (TLS) send TLS 1.2 ChangeCipherSpec (10) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec (10) eap_ttls: (TLS) send TLS 1.2 Handshake, Finished (10) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write finished (10) eap_ttls: (TLS) Handshake state - SSL negotiation finished successfully (10) eap_ttls: (TLS) Connection Established (10) eap_ttls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (10) eap_ttls: TLS-Session-Version = "TLS 1.2" (10) eap: Sending EAP Request (code 1) ID 114 length 61 (10) eap: EAP session adding &reply:State = 0x578cf4fd53fee100 (10) [eap] = handled (10) } # authenticate = handled (10) Using Post-Auth-Type Challenge (10) # Executing group from file /etc/freeradius/sites-enabled/default (10) Challenge { ... } # empty sub-section is ignored (10) session-state: Saving cached attributes (10) Framed-MTU = 994 (10) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (10) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (10) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (10) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (10) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (10) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (10) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (10) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (10) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (10) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (10) TLS-Session-Version = "TLS 1.2" (10) Sent Access-Challenge Id 4 from 172.16.30.16:1812 to 172.16.34.15:59333 length 119 (10) EAP-Message = 0x0172003d15800000003314030300010116030300286dafa27fd19a386914968f7a27ea09cce39e8982a6d197d67d3a46b70bd4d11281dbe7b6f46f5bb5 (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) State = 0x578cf4fd53fee1004cc3c0867672f708 (10) Finished request Waking up in 4.8 seconds. (11) Received Access-Request Id 5 from 172.16.34.15:59333 to 172.16.30.16:1812 length 188 (11) User-Name = "username1(a)domain1.nl" (11) EAP-Message = 0x0272006b150017030300601aad71a9f03680fc2193a6fa0e060884e0bd99962c33749a3298457858c72b46f6a5a124ff85227b81af20ec5ad26196f60a7479cea6751d9d3e3ad5e64567be7e3a4f457cd68169ba6ecf47bcf42289c78c1e4ddd643bc499d63e4c6e0a7aab (11) State = 0x578cf4fd53fee1004cc3c0867672f708 (11) Message-Authenticator = 0x1fe922c32ef244c0b366bdf84cdca550 (11) Restoring &session-state (11) &session-state:Framed-MTU = 994 (11) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (11) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (11) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (11) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (11) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (11) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (11) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (11) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (11) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (11) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (11) &session-state:TLS-Session-Version = "TLS 1.2" (11) # Executing section authorize from file /etc/freeradius/sites-enabled/default (11) authorize { (11) policy filter_username { (11) if (&User-Name) { (11) if (&User-Name) -> TRUE (11) if (&User-Name) { (11) if (&User-Name =~ / /) { (11) if (&User-Name =~ / /) -> FALSE (11) if (&User-Name =~ /@[^@]*@/ ) { (11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (11) if (&User-Name =~ /\.\./ ) { (11) if (&User-Name =~ /\.\./ ) -> FALSE (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (11) if (&User-Name =~ /\.$/) { (11) if (&User-Name =~ /\.$/) -> FALSE (11) if (&User-Name =~ /(a)\./) { (11) if (&User-Name =~ /(a)\./) -> FALSE (11) } # if (&User-Name) = notfound (11) } # policy filter_username = notfound (11) [preprocess] = ok (11) [chap] = noop (11) [mschap] = noop (11) [digest] = noop (11) suffix: Checking for suffix after "@" (11) suffix: Looking up realm "domain1.nl" for User-Name = "username1(a)domain1.nl" (11) suffix: No such realm "domain1.nl" (11) [suffix] = noop (11) eap: Peer sent EAP Response (code 2) ID 114 length 107 (11) eap: Continuing tunnel setup (11) [eap] = ok (11) } # authorize = ok (11) Found Auth-Type = eap (11) # Executing group from file /etc/freeradius/sites-enabled/default (11) authenticate { (11) eap: Expiring EAP session with state 0x578cf4fd53fee100 (11) eap: Finished EAP session with state 0x578cf4fd53fee100 (11) eap: Previous EAP request found for state 0x578cf4fd53fee100, released from the list (11) eap: Peer sent packet with method EAP TTLS (21) (11) eap: Calling submodule eap_ttls to process data (11) eap_ttls: Authenticate (11) eap_ttls: (TLS) EAP Done initial handshake (11) eap_ttls: Session established. Proceeding to decode tunneled attributes (11) eap_ttls: Got tunneled request (11) eap_ttls: User-Name = "username1(a)domain1.nl" (11) eap_ttls: User-Password = "passwdpasswd" (11) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (11) eap_ttls: Sending tunneled request (11) Virtual server inner-tunnel received request (11) User-Name = "username1(a)domain1.nl" (11) User-Password = "passwdpasswd" (11) FreeRADIUS-Proxied-To = 127.0.0.1 (11) WARNING: Outer and inner identities are the same. User privacy is compromised. (11) server inner-tunnel { (11) # Executing section authorize from file /etc/freeradius/sites-enabled/google-ldap-auth (11) authorize { (11) policy filter_username { (11) if (&User-Name) { (11) if (&User-Name) -> TRUE (11) if (&User-Name) { (11) if (&User-Name =~ / /) { (11) if (&User-Name =~ / /) -> FALSE (11) if (&User-Name =~ /@[^@]*@/ ) { (11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (11) if (&User-Name =~ /\.\./ ) { (11) if (&User-Name =~ /\.\./ ) -> FALSE (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (11) if (&User-Name =~ /\.$/) { (11) if (&User-Name =~ /\.$/) -> FALSE (11) if (&User-Name =~ /(a)\./) { (11) if (&User-Name =~ /(a)\./) -> FALSE (11) } # if (&User-Name) = notfound (11) } # policy filter_username = notfound (11) policy filter_inner_identity { (11) if (!&outer.request:User-Name || !&User-Name) { (11) if (!&outer.request:User-Name || !&User-Name) -> FALSE (11) if (&outer.request:User-Name != &User-Name) { (11) if (&outer.request:User-Name != &User-Name) -> FALSE (11) } # policy filter_inner_identity = notfound (11) policy split_username_nai { (11) if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) { (11) if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) -> TRUE (11) if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) { (11) update request { (11) EXPAND %{1} (11) --> username1 (11) &Stripped-User-Name := username1 (11) } # update request = noop (11) if ("%{3}" != '') { (11) EXPAND %{3} (11) --> domain1.nl (11) if ("%{3}" != '') -> TRUE (11) if ("%{3}" != '') { (11) update request { (11) EXPAND %{3} (11) --> domain1.nl (11) &Stripped-User-Domain = domain1.nl (11) } # update request = noop (11) } # if ("%{3}" != '') = noop (11) [updated] = updated (11) } # if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) = updated (11) ... skipping else: Preceding "if" was taken (11) } # policy split_username_nai = updated (11) update control { (11) &Cache-Status-Only := yes (11) } # update control = noop (11) cache_auth_accept: EXPAND %{md5:%{%{Stripped-User-Name}:-%{User-Name}}%{User-Password}} (11) cache_auth_accept: --> e3d72cd4af4d400654dba54caa15830a (11) cache_auth_accept: Found entry for "e3d72cd4af4d400654dba54caa15830a" (11) [cache_auth_accept] = ok (11) if (ok) { (11) if (ok) -> TRUE (11) if (ok) { (11) update { (11) &control:Auth-Type := Accept (11) } # update = noop (11) return (11) } # if (ok) = noop (11) } # authorize = updated (11) Found Auth-Type = Accept (11) Auth-Type = Accept, accepting the user (11) # Executing section post-auth from file /etc/freeradius/sites-enabled/google-ldap-auth (11) post-auth { (11) cache_ldap_user_dn: EXPAND %{Stripped-User-Name} (11) cache_ldap_user_dn: --> username1 (11) cache_ldap_user_dn: Found entry for "username1" (11) cache_ldap_user_dn: Merging cache entry into request (11) cache_ldap_user_dn: &control:LDAP-UserDN = "uid=username1,ou=Makerstreet Testing,ou=Users,dc=domain1,dc=nl" (11) [cache_ldap_user_dn] = ok (11) if (&control:Auth-Type == domain2.com) { (11) if (&control:Auth-Type == domain2.com) -> FALSE (11) if (&control:Auth-Type == domain1.nl) { (11) if (&control:Auth-Type == domain1.nl) -> FALSE (11) } # post-auth = ok (11) } # server inner-tunnel (11) Virtual server sending reply (11) eap_ttls: Got tunneled Access-Accept (11) eap: Sending EAP Success (code 3) ID 114 length 4 (11) eap: Freeing handler (11) [eap] = ok (11) } # authenticate = ok (11) # Executing section post-auth from file /etc/freeradius/sites-enabled/default (11) post-auth { (11) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (11) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (11) update { (11) &reply::Framed-MTU += &session-state:Framed-MTU[*] -> 994 (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) recv TLS 1.3 Handshake, ClientHello' (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake, ServerHello' (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake, Certificate' (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake, ServerKeyExchange' (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake, ServerHelloDone' (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) recv TLS 1.2 Handshake, ClientKeyExchange' (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) recv TLS 1.2 Handshake, Finished' (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 ChangeCipherSpec' (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake, Finished' (11) &reply::TLS-Session-Cipher-Suite += &session-state:TLS-Session-Cipher-Suite[*] -> 'ECDHE-RSA-AES256-GCM-SHA384' (11) &reply::TLS-Session-Version += &session-state:TLS-Session-Version[*] -> 'TLS 1.2' (11) } # update = noop (11) [exec] = noop (11) policy remove_reply_message_if_eap { (11) if (&reply:EAP-Message && &reply:Reply-Message) { (11) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (11) else { (11) [noop] = noop (11) } # else = noop (11) } # policy remove_reply_message_if_eap = noop (11) if (EAP-Key-Name && &reply:EAP-Session-Id) { (11) if (EAP-Key-Name && &reply:EAP-Session-Id) -> FALSE (11) } # post-auth = noop (11) Sent Access-Accept Id 5 from 172.16.30.16:1812 to 172.16.34.15:59333 length 189 (11) MS-MPPE-Recv-Key = 0x6b579096fbfd75c5e7e135949a499ad77fa9b505bc24ec7b376acfc3f77e99be (11) MS-MPPE-Send-Key = 0x6c88fad96e16e317ece405325694c309e6fe7e3e3ed7d5b84a43a24095e8f9a5 (11) EAP-Message = 0x03720004 (11) Message-Authenticator = 0x00000000000000000000000000000000 (11) User-Name = "username1(a)domain1.nl" (11) Framed-MTU += 994 (11) Finished request Waking up in 4.8 seconds.

2 4