- Freeradius-Users - lists.freeradius.org

Dictionary question
by Igor Smitran 26 Feb '23

26 Feb '23

Hi list, Is it possible to have a dictionary describing Cisco-AVPair in more detail. If i have something like this: Cisco-AVPair += subscriber:sub-qos-policy-in=1.5Mbps Is it possible to make it look like this: Cisco-AVP-qos-policy-in += 1.5Mbps And when radius sends response to NAS it will be converted to: Cisco-AVPair += subscriber:sub-qos-policy-in=1.5Mbps Thank you

1 0

Compiling freeradius v3.0.x with kqueue support on ubuntu 22.04
by Prajwal Basnet 26 Feb '23

26 Feb '23

Hi all, I am trying to compile freeradius v3.0.x with kqueue support on ubuntu 22.04. I know that kqueue is not present in linux & is a feature for BSDs/OSX. So, I'm trying to use libkqueue library for compatibility (github.com/mheily/libkqueue) But every time I try to compile, during the configuration phase when I run "./configure", it checks for kqueue & it isn't found. #9 12.23 checking for kqueue... no #9 7.796 checking sys/event.h usability... no #9 7.821 checking sys/event.h presence... no #9 7.833 checking for sys/event.h... no Sincerely, Prajwal

3 3

Google LDAP auth
by Davide G. M. Salvetti 25 Feb '23

25 Feb '23

Hi, I'm trying to understand how to authenticate users with Google Secure LDAP service. I'm not sure I understood how to do it. I perused and configured mods-available/ldap_google, tried to adapt sites-available/default as per instructions there, enabled mods cache_auth, ldap_google, enabled sites default and google-ldap-auth, disabled site inner-tunnel. Since sites-available/google-ldap-auth is declared designed to be used an inner virtual server, I renamed the virtual server as "inner-tunnel". I'm not sure: did I understand it right? What's the proper way to enable google-ldap-auth? Am I supposed to set virtual-server in mod eap instead? Local radtests of the inner-tunnel seems to be successful (see log request (1)), but WiFi Enterprise EAP tests are not. I tried different protocols with a Windows laptop and an Android phone; please see the enclosed freeradius -X log, where I deleted with [...] some AP Access-Request with Service-Type = Call-Check which I think aren't relevant and anonymized test.user and my.domain. I tried to read the log, but I'm not so fluent with FreeRADIUS; could you please point me my mistakes? -- Thanks, Davide

3 2

Anyone have an example Cisco TACACS Acct PCAP?
by Arran Cudbard-Bell 24 Feb '23

24 Feb '23

We (The FreeRADIUS development team) are fixing up the TACACS frontend and process modules in v4.0.x. The example packets we're working with for TACACS accounting have timestamps in the format "2023-02-22 18:37:36 EST". RFC 8907 states timestamps should be seconds since the unix epoch. We're wondering how many TACACS clients out there actually follow the RFC and how many use their own weird and wonderful formats. We'd appreciate any PCAPs (or screen grabs of PCAPs) which show the format their TACACS clients uses for dates. Thanks, -Arran

4 4

Connect Users registered on a ldaps (azure ad ds with hashed passwords ) via a local freeradius server
by Chris Nzengue - dejamobile externe 24 Feb '23

24 Feb '23

For the begining i want say that . I am reposting another question because my last post wasn't exacty clear. I realized that, my issue was diffrent than the issue i expalined. Because my real issue is very different i prefered create another post. What i am trying to do? I want connect on the local wifi network , users registry on ldaps(azure ad ds) . The freeradius is on a local server and the azure ad ds is on the cloud. The azure ad ds is not like an classic ldap. An admin User can't read the passord on the azure ad ds (laps). This is the problem beacause, i think ldap authentification works like that. The user enter id and password then the admin user registryed on the ldap check if the password is right or wrong. On azure ad ds (ldaps) the passwords are not saved on an clear text format. The passwords are hashed (or encrypted) . i saw an interresing thing about use samba or use a hash function . First samba can be only used with an local active directory and for the second solution i don't know how to use an hash function. I also saw a thing like FreeRADIUS can use LDAP as an authentication oracle, meaning FreeRADIUS passes authentication credentials to LDAP, and LDAP returns a pass/fail response. FreeRADIUS can then generate an Access-Accept or Access-Reject packet based on that. But i also don't know how to do that. why i am trying to do it: I want do it because i want secure the wifi network and not use a single keyword. i don't want also oblige users to know a new password and id . I want they use the same password and id. What i expect the server to do? i expect the server check on the ldaps if the id and the password received by the acces point are right. If the id and the password are right then the user join the network. But the problem is the passwords are hashed and i think freeradius can read it. What the server does instead (i know my setting is wrong but the posting process oblige me to post my log ) ? FreeRADIUS Version 3.0.26 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/soh including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/ntlm_auth including configuration file /etc/freeradius/3.0/policy.d/eap including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client AP_cisco1 { ipaddr = 192.168.200.20 require_message_authenticator = no secret = <<< secret >>> virtual_server = "inner-tunnel" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = PAP # Creating Auth-Type = LDAP # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "ldaps://aadds.*******.com" port = 636 identity = "cn=Radius,ou=AADDC Users, dc=*********,dc=com" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "ou=AADDC Users,dc=********,dc=com" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { tls_min_version = "1.2" start_tls = no require_cert = "never" } } Creating attribute LDAP-Group # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/3.0/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/etc/freeadius/3.0/mods-available/ntlm_auth --request-nt-key --domain=********.com --username=Radius --password=R7)LhEf3Y}Uv)l" shell_escape = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } instantiate { } # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20513 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/coa # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "pap" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:342 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 60552 Listening on proxy address :: port 35305 Ready to process requests (0) Received Access-Request Id 153 from 192.168.200.20:51098 to 192.168.10.124:1812 length 269 (0) User-Name = "chris.********" (0) Chargeable-User-Identity = 0x14 (0) Location-Capable = Civic-Location (0) Calling-Station-Id = "98-5a-eb-8e-1c-5c" (0) Called-Station-Id = "00-fc-ba-e1-98-e0:radius_test" (0) NAS-Port = 1 (0) Cisco-AVPair = "audit-session-id=14c8a8c000003a87a5e9c663" (0) Acct-Session-Id = "63c6e996/98:5a:eb:8e:1c:5c/15436" (0) NAS-IP-Address = 192.168.200.20 (0) NAS-Identifier = "********" (0) Airespace-Wlan-Id = 6 (0) Service-Type = Framed-User (0) Framed-MTU = 1300 (0) NAS-Port-Type = Wireless-802.11 (0) EAP-Message = 0x020100120163687269732e6e7a656e677565 (0) Message-Authenticator = 0x974324719f4ff1b1116600ab28a17e4b (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "chris.********", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) update control { (0) &Proxy-To-Realm := LOCAL (0) } # update control = noop (0) files: Searching for user in group "CN=********Team,OU=AADDC Users,DC=********,DC=com" rlm_ldap (ldap): Reserved connection (0) (0) files: EXPAND (&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})) (0) files: --> (&(objectClass=user)(sAMAccountName=chris.********)) (0) files: Performing search in "ou=AADDC Users,dc=********,dc=com" with filter "(&(objectClass=user)(sAMAccountName=chris.********))", scope "sub" (0) files: Waiting for search result... (0) files: User object found at DN "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com" (0) files: Checking user object's memberOf attributes (0) files: Performing unfiltered search in "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com", scope "base" (0) files: Waiting for search result... (0) files: Processing memberOf value "CN=SSL_VPN_SSO,OU=AADDC Users,DC=********,DC=com" as a DN (0) files: Processing memberOf value "CN=********Team,OU=AADDC Users,DC=********,DC=com" as a DN (0) files: User found in group DN "CN=********Team,OU=AADDC Users,DC=********,DC=com". Comparison between membership: dn, check: dn rlm_ldap (ldap): Released connection (0) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Closing expired connection (4) - Hit idle_timeout limit rlm_ldap (ldap): Closing expired connection (3) - Hit idle_timeout limit rlm_ldap (ldap): Closing expired connection (2) - Hit idle_timeout limit rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing expired connection (1) - Hit idle_timeout limit (0) files: users: Matched entry DEFAULT at line 72 (0) [files] = ok rlm_ldap (ldap): Reserved connection (0) (0) ldap: EXPAND (&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})) (0) ldap: --> (&(objectClass=user)(sAMAccountName=chris.********)) (0) ldap: Performing search in "ou=AADDC Users,dc=********,dc=com" with filter "(&(objectClass=user)(sAMAccountName=chris.********))", scope "sub" (0) ldap: Waiting for search result... (0) ldap: User object found at DN "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com" (0) ldap: Processing user attributes (0) ldap: control:My_Group = 'CN=SSL_VPN_SSO,OU=AADDC Users,DC=********,DC=com' (0) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (0) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (0) (0) [ldap] = updated (0) if ((ok || updated) && User-Password && !control:Auth-Type) { (0) if ((ok || updated) && User-Password && !control:Auth-Type) -> FALSE (0) [expiration] = noop (0) [logintime] = noop (0) [pap] = noop (0) } # authorize = updated (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (0) Post-Auth-Type REJECT { (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> chris.******** (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) update outer.session-state { (0) ERROR: Mapping "&request:Module-Failure-Message" -> "&Module-Failure-Message" invalid in this context (0) } # update outer.session-state = invalid (0) } # Post-Auth-Type REJECT = invalid (0) Delaying response for 1.000000 seconds Waking up in 0.1 seconds. Waking up in 0.8 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 153 from 192.168.10.124:1812 to 192.168.200.20:51098 length 20 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 153 with timestamp +75 due to cleanup_delay was reached Ready to process requests (1) Received Access-Request Id 154 from 192.168.200.20:51098 to 192.168.10.124:1812 length 269 (1) User-Name = "chris.********" (1) Chargeable-User-Identity = 0x14 (1) Location-Capable = Civic-Location (1) Calling-Station-Id = "98-5a-eb-8e-1c-5c" (1) Called-Station-Id = "00-fc-ba-e1-8f-a0:radius_test" (1) NAS-Port = 1 (1) Cisco-AVPair = "audit-session-id=14c8a8c000003a87a5e9c663" (1) Acct-Session-Id = "63c6e996/98:5a:eb:8e:1c:5c/15436" (1) NAS-IP-Address = 192.168.200.20 (1) NAS-Identifier = "********" (1) Airespace-Wlan-Id = 6 (1) Service-Type = Framed-User (1) Framed-MTU = 1300 (1) NAS-Port-Type = Wireless-802.11 (1) EAP-Message = 0x020100120163687269732e6e7a656e677565 (1) Message-Authenticator = 0xa0ca0c245aef7cfc9b3da3a37d812c5f (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "chris.********", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) update control { (1) &Proxy-To-Realm := LOCAL (1) } # update control = noop (1) files: Searching for user in group "CN=********Team,OU=AADDC Users,DC=********,DC=com" rlm_ldap (ldap): Reserved connection (5) (1) files: EXPAND (&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})) (1) files: --> (&(objectClass=user)(sAMAccountName=chris.********)) (1) files: Performing search in "ou=AADDC Users,dc=********,dc=com" with filter "(&(objectClass=user)(sAMAccountName=chris.********))", scope "sub" (1) files: Waiting for search result... (1) files: User object found at DN "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com" (1) files: Checking user object's memberOf attributes (1) files: Performing unfiltered search in "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com", scope "base" (1) files: Waiting for search result... (1) files: Processing memberOf value "CN=SSL_VPN_SSO,OU=AADDC Users,DC=********,DC=com" as a DN (1) files: Processing memberOf value "CN=********Team,OU=AADDC Users,DC=********,DC=com" as a DN (1) files: User found in group DN "CN=********Team,OU=AADDC Users,DC=********,DC=com". Comparison between membership: dn, check: dn rlm_ldap (ldap): Released connection (5) Need 1 more connections to reach min connections (3) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) files: users: Matched entry DEFAULT at line 72 (1) [files] = ok rlm_ldap (ldap): Reserved connection (0) (1) ldap: EXPAND (&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})) (1) ldap: --> (&(objectClass=user)(sAMAccountName=chris.********)) (1) ldap: Performing search in "ou=AADDC Users,dc=********,dc=com" with filter "(&(objectClass=user)(sAMAccountName=chris.********))", scope "sub" (1) ldap: Waiting for search result... (1) ldap: User object found at DN "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com" (1) ldap: Processing user attributes (1) ldap: control:My_Group = 'CN=SSL_VPN_SSO,OU=AADDC Users,DC=********,DC=com' (1) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (1) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (0) (1) [ldap] = updated (1) if ((ok || updated) && User-Password && !control:Auth-Type) { (1) if ((ok || updated) && User-Password && !control:Auth-Type) -> FALSE (1) [expiration] = noop (1) [logintime] = noop (1) [pap] = noop (1) } # authorize = updated (1) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (1) Failed to authenticate the user (1) Using Post-Auth-Type Reject (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (1) Post-Auth-Type REJECT { (1) attr_filter.access_reject: EXPAND %{User-Name} (1) attr_filter.access_reject: --> chris.******** (1) attr_filter.access_reject: Matched entry DEFAULT at line 11 (1) [attr_filter.access_reject] = updated (1) update outer.session-state { (1) ERROR: Mapping "&request:Module-Failure-Message" -> "&Module-Failure-Message" invalid in this context (1) } # update outer.session-state = invalid (1) } # Post-Auth-Type REJECT = invalid (1) Delaying response for 1.000000 seconds Waking up in 0.1 seconds. Waking up in 0.8 seconds. (1) Sending delayed response (1) Sent Access-Reject Id 154 from 192.168.10.124:1812 to 192.168.200.20:51098 length 20 Waking up in 3.9 seconds. (1) Cleaning up request packet ID 154 with timestamp +95 due to cleanup_delay was reached Ready to process requests (2) Received Access-Request Id 155 from 192.168.200.20:51098 to 192.168.10.124:1812 length 269 (2) User-Name = "chris.********" (2) Chargeable-User-Identity = 0x14 (2) Location-Capable = Civic-Location (2) Calling-Station-Id = "98-5a-eb-8e-1c-5c" (2) Called-Station-Id = "00-fc-ba-e1-8f-a0:radius_test" (2) NAS-Port = 1 (2) Cisco-AVPair = "audit-session-id=14c8a8c000003a87a5e9c663" (2) Acct-Session-Id = "63c6e996/98:5a:eb:8e:1c:5c/15436" (2) NAS-IP-Address = 192.168.200.20 (2) NAS-Identifier = "********" (2) Airespace-Wlan-Id = 6 (2) Service-Type = Framed-User (2) Framed-MTU = 1300 (2) NAS-Port-Type = Wireless-802.11 (2) EAP-Message = 0x020100120163687269732e6e7a656e677565 (2) Message-Authenticator = 0x1ed012aae54a89fb6558ea0019fafe02 (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "chris.********", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) update control { (2) &Proxy-To-Realm := LOCAL (2) } # update control = noop (2) files: Searching for user in group "CN=********Team,OU=AADDC Users,DC=********,DC=com" rlm_ldap (ldap): Reserved connection (5) (2) files: EXPAND (&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})) (2) files: --> (&(objectClass=user)(sAMAccountName=chris.********)) (2) files: Performing search in "ou=AADDC Users,dc=********,dc=com" with filter "(&(objectClass=user)(sAMAccountName=chris.********))", scope "sub" (2) files: Waiting for search result... (2) files: User object found at DN "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com" (2) files: Checking user object's memberOf attributes (2) files: Performing unfiltered search in "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com", scope "base" (2) files: Waiting for search result... (2) files: Processing memberOf value "CN=SSL_VPN_SSO,OU=AADDC Users,DC=********,DC=com" as a DN (2) files: Processing memberOf value "CN=********Team,OU=AADDC Users,DC=********,DC=com" as a DN (2) files: User found in group DN "CN=********Team,OU=AADDC Users,DC=********,DC=com". Comparison between membership: dn, check: dn rlm_ldap (ldap): Released connection (5) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (7), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://aadds.********.com:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (2) files: users: Matched entry DEFAULT at line 72 (2) [files] = ok rlm_ldap (ldap): Reserved connection (6) (2) ldap: EXPAND (&(objectClass=user)(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})) (2) ldap: --> (&(objectClass=user)(sAMAccountName=chris.********)) (2) ldap: Performing search in "ou=AADDC Users,dc=********,dc=com" with filter "(&(objectClass=user)(sAMAccountName=chris.********))", scope "sub" (2) ldap: Waiting for search result... (2) ldap: User object found at DN "CN=Chris ******** - ******** externe,OU=AADDC Users,DC=********,DC=com" (2) ldap: Processing user attributes (2) ldap: control:My_Group = 'CN=SSL_VPN_SSO,OU=AADDC Users,DC=********,DC=com' (2) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (2) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (6) (2) [ldap] = updated (2) if ((ok || updated) && User-Password && !control:Auth-Type) { (2) if ((ok || updated) && User-Password && !control:Auth-Type) -> FALSE (2) [expiration] = noop (2) [logintime] = noop (2) [pap] = noop (2) } # authorize = updated (2) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (2) Failed to authenticate the user (2) Using Post-Auth-Type Reject (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (2) Post-Auth-Type REJECT { (2) attr_filter.access_reject: EXPAND %{User-Name} (2) attr_filter.access_reject: --> chris.******** (2) attr_filter.access_reject: Matched entry DEFAULT at line 11 (2) [attr_filter.access_reject] = updated (2) update outer.session-state { (2) ERROR: Mapping "&request:Module-Failure-Message" -> "&Module-Failure-Message" invalid in this context (2) } # update outer.session-state = invalid (2) } # Post-Auth-Type REJECT = invalid (2) Delaying response for 1.000000 seconds Waking up in 0.1 seconds. Waking up in 0.8 seconds. (2) Sending delayed response (2) Sent Access-Reject Id 155 from 192.168.10.124:1812 to 192.168.200.20:51098 length 20 Waking up in 3.9 seconds. (2) Cleaning up request packet ID 155 with timestamp +101 due to cleanup_delay was reached Ready to process requests <https://www.dejamobile.com/><https://www.dejamobile.com/><https://www.dejamobile.com/><https://www.dejamobile.com/><https://www.dejamobile.com/> <https://dejamobile.com/>[cid:logo-500x500_504d48b6-dc99-43ec-874c-af726c18f56e.png] Chris Nzengue Stagiaire DEVOPS DEVOPS internship <https://www.linkedin.com/company/dejamobile> [cid:SocialLink_Linkedin_32x32_b9896d3d-92f0-40ba-b3a3-c8ead42de0f5.png] <https://www.linkedin.com/company/dejamobile> <https://www.linkedin.com/company/dejamobile> <https://www.twitter.com/dejamobile> [cid:SocialLink_Twitter_32x32_d8c0f93a-95bb-4ab2-8384-cc2e43456b2f.png] <https://twitter.com/dejamobile> Fixe / Office: +33(2)14747500 chris.nzengue(a)dejamobile.com<mailto:%7BE-mail%7D> <https://www.linkedin.com/company/dejamobile><http://www.linkedin.com/company/dejamobile><https://www.linkedin.com/company/dejamobile><https://dejamobile.com/dejamobile-at-mpe-2022/><https://www.linkedin.com/company/dejamobile/>[cid:mpe23mail_c31705da-edc4-4d9a-aa24-bb15583ff32a.png]<https://www.merchantpaymentsecosystem.com/>

4 3

Freeradius Upgrade from 3.0.1 to 3.2.2
by Steven Walters 23 Feb '23

23 Feb '23

Thanks for the response. It resolved my issue. I was however getting an authentication not found error which I fixed by making a slight adjustment because we don't check password for mobile: -ldap-mobile if (notfound) { reject } else { accept } On Thu, 23 Feb 2023 at 14:00, <freeradius-users-request(a)lists.freeradius.org> wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Freeradius Upgrade from 3.0.1 to 3.2.2 (Steven Walters) > 2. Re: Freeradius Upgrade from 3.0.1 to 3.2.2 (Alan DeKok) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 22 Feb 2023 20:47:42 +0200 > From: Steven Walters <steven.walters1(a)gmail.com> > To: freeradius-users(a)lists.freeradius.org > Subject: Freeradius Upgrade from 3.0.1 to 3.2.2 > Message-ID: > <CALF=EMJUde0_Y=XEOENp5Ro3a3PJFnF5fYCx-= > UOdSOb5aGKzA(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Hi > > I agree, we should have updated our freeradius a long time ago, but we will > do better going forward. > > Just to explain what we are training to achieve. > > Our fixed line customers authenticate with username and password. Our fixed > line customers can have a mobile VAS linked to fixed line. Customer can > have single SIM or multiple SIM linked to fixed line username on LDAP. > > In the case of mobile service, we receive the MSISDN in the radius access > request. We then lookup the username which has the MSISDN linked on LDAP. > If subscriber name has this MSISDN linked, the radius will respond with the > username in the access-accept. If no match is found it will respond with > access-reject. > > When the radius receives the accounting start for this session it will have > the username of the fixed line service returned in the access-accept and > not the MSISDN which was original in the access request. > > So basically, in the case of the mobile VAS, the authentication finds the > username on LDAP which has the MSISDN linked as a VAS and if no username > has the MSISDN (for example customer cancelled the VAS but is still trying > to use the SIM) it will send an access reject. No password checks are done > for mobile service. > > This mobile VAS was implemented before I joined so there might be better > alternative to provide the same result. > > Kind regards > Steven > > > On Wed, 22 Feb 2023 at 14:00, < > freeradius-users-request(a)lists.freeradius.org> > wrote: > > > Send Freeradius-Users mailing list submissions to > > freeradius-users(a)lists.freeradius.org > > > > To subscribe or unsubscribe via the World Wide Web, visit > > https://lists.freeradius.org/mailman/listinfo/freeradius-users > > or, via email, send a message with subject or body 'help' to > > freeradius-users-request(a)lists.freeradius.org > > > > You can reach the person managing the list at > > freeradius-users-owner(a)lists.freeradius.org > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of Freeradius-Users digest..." > > > > > > Today's Topics: > > > > 1. Freeradius Upgrade from 3.0.1 to 3.2.2 (Steven Walters) > > 2. Re: Freeradius Upgrade from 3.0.1 to 3.2.2 (Alan DeKok) > > 3. Some new documentation for "how to make FreeRADIUS do what I > > want" (Alan DeKok) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Tue, 21 Feb 2023 23:47:05 +0200 > > From: Steven Walters <steven.walters1(a)gmail.com> > > To: freeradius-users(a)lists.freeradius.org > > Subject: Freeradius Upgrade from 3.0.1 to 3.2.2 > > Message-ID: > > <CALF=EMKe4Ky91x7A2GgAKaQkVv0D+qxjWqFkaTOgzq= > > BvBFA2w(a)mail.gmail.com> > > Content-Type: text/plain; charset="UTF-8" > > > > Hi > > > > I am in the process of upgrading our radius servers but have one issue > > outstanding. > > > > Basically we receive in the radius request from mobile a MSISDN. We then > go > > do a lookup to find the username on LDAP matching the MSISDN. > > > > In the old version everything works fine but after upgrading the radius > > responds with access rejection even though MSISDN finds a username on > LDAP. > > > > Below are extracts from the mobile virtual server file and ldap file. > > > > mobile virtual server: > > > > # The ldap module reads passwords from the LDAP database. > > -ldap-mobile > > if (!ok) { > > reject > > > > ldap: > > > > user { > > # Where to start searching in the tree for users > > base_dn = "${..base_dn}" > > > > # Filter for user objects, should be specific enough > > # to identify a single user object. > > #filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" > > #filter = > > "(mobileradiusCallingStationId=%{Calling-Station-Id})" > > filter = > > "(&(mobileradiusCallingStationId=%{Calling-Station-Id})(status=10100))" > > > > Below is debug from version 3.0.1 > > > > rlm_ldap (ldap-mobile): Reserved connection (11) > > (9) ldap-mobile : expand: > > "(&(mobileradiusCallingStationId=%{Calling-Station-Id})(status=10100))" > -> > > '(&(mobileradiusCallingStationId=27671946862)(status=10100))' > > (9) ldap-mobile : expand: "cn=radius,ou=isp" -> 'cn=radius,ou=isp' > > (9) ldap-mobile : Performing search in 'cn=radius,ou=isp' with filter > > '(&(mobileradiusCallingStationId=27671946862)(status=10100))' > > (9) ldap-mobile : Waiting for search result... > > (9) ldap-mobile : User object found at DN "uid=onyebilanma(a)telkomsa.net > > ,cn=radius,ou=isp" > > (9) ldap-mobile : Processing user attributes > > (9) ldap-mobile : reply:User-Name := ' > > onyebilanma(a)telkomsa.net > > ' > > (9) ldap-mobile : control:User-Name := ' > > onyebilanma(a)telkomsa.net' > > rlm_ldap (ldap-mobile): Released connection (11) > > rlm_ldap (ldap-mobile): Opening additional connection (12) > > rlm_ldap (ldap-mobile): Connecting to 10.146.46.133:389 > > TLSMC: MozNSS compatibility interception begins. > > tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration > is > > present. > > tlsmc_intercept_initialization: INFO: successfully intercepted TLS > > initialization. Continuing with OpenSSL only. > > TLSMC: MozNSS compatibility interception ends. > > rlm_ldap (ldap-mobile): Waiting for bind result... > > rlm_ldap (ldap-mobile): Bind successful > > (9) [-ldap-mobile] = ok > > (9) ? if (!ok) > > (9) ? if (!ok) -> FALSE > > (9) } # authorize = ok > > (9) Found Auth-Type = Accept > > (9) Auth-Type = Accept, accepting the user > > (9) Login OK: [27671946862] (from client 105.187.248.220 port 0 cli > > 27671946862) > > (9) # Executing section post-auth from file > /etc/raddb/sites-enabled/mobile > > (9) post-auth { > > (9) [exec] = noop > > (9) remove_reply_message_if_eap remove_reply_message_if_eap { > > (9) ? if (reply:EAP-Message && reply:Reply-Message) > > (9) ? if (reply:EAP-Message && reply:Reply-Message) -> FALSE > > (9) else else { > > (9) [noop] = noop > > (9) } # else else = noop > > (9) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop > > (9) update reply { > > (9) Acct-Interim-Interval = 14400 > > (9) } # update reply = noop > > (9) } # post-auth = noop > > Sending Access-Accept of id 134 from 10.146.44.71 port 1812 to > > 105.187.248.220 port 4017 > > User-Name = 'onyebilanma(a)telkomsa.net' > > Acct-Interim-Interval = 14400 > > > > Below is debug from version 3.2.2 > > > > rlm_ldap (ldap-mobile): Reserved connection (2) > > (5) ldap-mobile: EXPAND > > (&(mobileradiusCallingStationId=%{Calling-Station-Id})(status=10100)) > > (5) ldap-mobile: --> > > (&(mobileradiusCallingStationId=27659066168)(status=10100)) > > (5) ldap-mobile: Performing search in "cn=radius,ou=isp" with filter > > "(&(mobileradiusCallingStationId=27659066168)(status=10100))", scope > "sub" > > (5) ldap-mobile: Waiting for search result... > > (5) ldap-mobile: User object found at DN "uid= > ahmed.elhefnawy(a)telkomsa.net > > ,cn=radius,ou=isp" > > (5) ldap-mobile: Processing user attributes > > (5) ldap-mobile: reply:User-Name := 'ahmed.elhefnawy(a)telkomsa.net' > > (5) ldap-mobile: control:User-Name := 'ahmed.elhefnawy(a)telkomsa.net' > > rlm_ldap (ldap-mobile): Released connection (2) > > Need 4 more connections to reach min connections (8) > > Need more connections to reach 16 spares > > rlm_ldap (ldap-mobile): Opening additional connection (9), 1 of 28 > pending > > slots used > > rlm_ldap (ldap-mobile): Connecting to ldap://10.146.46.133:389 > > rlm_ldap (ldap-mobile): Waiting for bind result... > > rlm_ldap (ldap-mobile): Bind successful > > (5) [ldap-mobile] = updated > > (5) if (!ok) { > > (5) if (!ok) -> TRUE > > (5) if (!ok) { > > (5) [reject] = reject > > (5) } # if (!ok) = reject > > (5) } # authorize = reject > > (5) Invalid user: [27659066168] (from client 105.187.248.220 port 0 cli > > 27659066168) > > (5) Using Post-Auth-Type Reject > > (5) # Executing group from file /etc/raddb/sites-enabled/mobile > > (5) Post-Auth-Type REJECT { > > (5) policy remove_reply_message_if_eap { > > (5) if (&reply:EAP-Message && &reply:Reply-Message) { > > (5) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE > > (5) else { > > (5) [noop] = noop > > (5) } # else = noop > > (5) } # policy remove_reply_message_if_eap = noop > > (5) } # Post-Auth-Type REJECT = noop > > (5) Login incorrect: [27659066168] (from client 105.187.248.220 port 0 > cli > > 27659066168) > > (5) Delaying response for 2.000000 seconds > > > > Any advice would be appreciated? > > > > Regards > > Steven > > > > > > ------------------------------ > > > > Message: 2 > > Date: Tue, 21 Feb 2023 17:47:47 -0500 > > From: Alan DeKok <aland(a)deployingradius.com> > > To: FreeRadius users mailing list > > <freeradius-users(a)lists.freeradius.org> > > Subject: Re: Freeradius Upgrade from 3.0.1 to 3.2.2 > > Message-ID: <407E5AF6-AD76-468D-97CD-1D5858D63AC1(a)deployingradius.com> > > Content-Type: text/plain; charset=us-ascii > > > > On Feb 21, 2023, at 4:47 PM, Steven Walters <steven.walters1(a)gmail.com> > > wrote: > > > Below is debug from version 3.0.1 > > > > To be honest... 3.0.1 is about ten years old. We're not going to worry > > a lot about compatibility with every little piece of it. > > > > Plus, there have been many bug fixes since then, including security > > fixes. If you don't like people attacking your RADIUS server, it should > > have been updated regularly. > > > ... > > > Below is debug from version 3.2.2 > > > ... > > > (5) [ldap-mobile] = updated > > > (5) if (!ok) { > > > > Change that to: > > > > if (!ok || !updated) { > > ... > > > > and it will work. > > > > > Any advice would be appreciated? > > > > Upgrade regularly. > > > > Plus, it helps to explain *why* you have this configuration. You > > generally don't have to explicitly reject users who don't have passwords. > > The server will do this automatically. > > > > So you don't need a "if not found in LDAP, reject" configuration. Just > > check LDAP. If the user isn't found, they won't have a password read > from > > LDAP. And the server won't be able to authenticate them. > > > > Alan DeKok. > > > > > > > > ------------------------------ > > > > Message: 3 > > Date: Tue, 21 Feb 2023 17:58:56 -0500 > > From: Alan DeKok <aland(a)deployingradius.com> > > To: FreeRadius users mailing list > > <freeradius-users(a)lists.freeradius.org> > > Subject: Some new documentation for "how to make FreeRADIUS do what I > > want" > > Message-ID: <98543E7C-E533-4DBC-9D27-09E9E9261717(a)deployingradius.com> > > Content-Type: text/plain; charset=us-ascii > > > > We've been busy working on v4, including making sure that every aspect > > of the server is extensively documented. > > > > > > I've just written a document on "policies". But it's really "how do I > > get this software to do what I want, without going crazy". > > > > > > > https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modu… > > > > It gives a detailed guide to the methods used to create FreeRADIUS > > configurations. > > > > There's also a document on why FreeRADIUS is so complex to configure: > > > > > > > https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modu… > > > > This should help to explain why we can't just have a shiny button which > > says "do what I want". The configuration is much, much, more complex > than > > that. > > > > v4 also has complete documentation for each unlang keyword: > > > https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modu… > > > > This documentation applies to v4, but it's _mostly_ compatible with v3. > > Where there are changes from v3, the documentation explains it. > > > > Hopefully this helps. We're not just wishing that v4 comes out one > > day. We're actively working on it. > > > > Alan DeKok. > > > > > > > > ------------------------------ > > > > Subject: Digest Footer > > > > - > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > > > > > > ------------------------------ > > > > End of Freeradius-Users Digest, Vol 214, Issue 21 > > ************************************************* > > > > > -- > Warm Regards > > Steven Walters > 0814287179 > > > ------------------------------ > > Message: 2 > Date: Wed, 22 Feb 2023 14:11:54 -0500 > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: Freeradius Upgrade from 3.0.1 to 3.2.2 > Message-ID: <AB4430D0-F05B-4484-B471-C38C4F07572B(a)deployingradius.com> > Content-Type: text/plain; charset=us-ascii > > On Feb 22, 2023, at 1:47 PM, Steven Walters <steven.walters1(a)gmail.com> > wrote: > > Our fixed line customers authenticate with username and password. Our > fixed > > line customers can have a mobile VAS linked to fixed line. Customer can > > have single SIM or multiple SIM linked to fixed line username on LDAP. > > > > In the case of mobile service, we receive the MSISDN in the radius access > > request. We then lookup the username which has the MSISDN linked on LDAP. > > If subscriber name has this MSISDN linked, the radius will respond with > the > > username in the access-accept. If no match is found it will respond with > > access-reject. > > OK. So "if not found in LDAP, reject". Luckily, the ldap module will > return "notfound", which is a bit better indication than "!ok" or > "!updated". > > ldap > if (notfound) { > reject > } > > > > When the radius receives the accounting start for this session it will > have > > the username of the fixed line service returned in the access-accept and > > not the MSISDN which was original in the access request. > > That makes sense. > > > So basically, in the case of the mobile VAS, the authentication finds the > > username on LDAP which has the MSISDN linked as a VAS and if no username > > has the MSISDN (for example customer cancelled the VAS but is still > trying > > to use the SIM) it will send an access reject. No password checks are > done > > for mobile service. > > > > This mobile VAS was implemented before I joined so there might be better > > alternative to provide the same result. > > The "notfound' return code is the best indication of "not found" . > > Alan DeKok. > > > > ------------------------------ > > Subject: Digest Footer > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > > ------------------------------ > > End of Freeradius-Users Digest, Vol 214, Issue 22 > ************************************************* > -- Warm Regards Steven Walters 0814287179

1 0

Freeradius Upgrade from 3.0.1 to 3.2.2
by Steven Walters 22 Feb '23

22 Feb '23

Hi I agree, we should have updated our freeradius a long time ago, but we will do better going forward. Just to explain what we are training to achieve. Our fixed line customers authenticate with username and password. Our fixed line customers can have a mobile VAS linked to fixed line. Customer can have single SIM or multiple SIM linked to fixed line username on LDAP. In the case of mobile service, we receive the MSISDN in the radius access request. We then lookup the username which has the MSISDN linked on LDAP. If subscriber name has this MSISDN linked, the radius will respond with the username in the access-accept. If no match is found it will respond with access-reject. When the radius receives the accounting start for this session it will have the username of the fixed line service returned in the access-accept and not the MSISDN which was original in the access request. So basically, in the case of the mobile VAS, the authentication finds the username on LDAP which has the MSISDN linked as a VAS and if no username has the MSISDN (for example customer cancelled the VAS but is still trying to use the SIM) it will send an access reject. No password checks are done for mobile service. This mobile VAS was implemented before I joined so there might be better alternative to provide the same result. Kind regards Steven On Wed, 22 Feb 2023 at 14:00, <freeradius-users-request(a)lists.freeradius.org> wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Freeradius Upgrade from 3.0.1 to 3.2.2 (Steven Walters) > 2. Re: Freeradius Upgrade from 3.0.1 to 3.2.2 (Alan DeKok) > 3. Some new documentation for "how to make FreeRADIUS do what I > want" (Alan DeKok) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 21 Feb 2023 23:47:05 +0200 > From: Steven Walters <steven.walters1(a)gmail.com> > To: freeradius-users(a)lists.freeradius.org > Subject: Freeradius Upgrade from 3.0.1 to 3.2.2 > Message-ID: > <CALF=EMKe4Ky91x7A2GgAKaQkVv0D+qxjWqFkaTOgzq= > BvBFA2w(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Hi > > I am in the process of upgrading our radius servers but have one issue > outstanding. > > Basically we receive in the radius request from mobile a MSISDN. We then go > do a lookup to find the username on LDAP matching the MSISDN. > > In the old version everything works fine but after upgrading the radius > responds with access rejection even though MSISDN finds a username on LDAP. > > Below are extracts from the mobile virtual server file and ldap file. > > mobile virtual server: > > # The ldap module reads passwords from the LDAP database. > -ldap-mobile > if (!ok) { > reject > > ldap: > > user { > # Where to start searching in the tree for users > base_dn = "${..base_dn}" > > # Filter for user objects, should be specific enough > # to identify a single user object. > #filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" > #filter = > "(mobileradiusCallingStationId=%{Calling-Station-Id})" > filter = > "(&(mobileradiusCallingStationId=%{Calling-Station-Id})(status=10100))" > > Below is debug from version 3.0.1 > > rlm_ldap (ldap-mobile): Reserved connection (11) > (9) ldap-mobile : expand: > "(&(mobileradiusCallingStationId=%{Calling-Station-Id})(status=10100))" -> > '(&(mobileradiusCallingStationId=27671946862)(status=10100))' > (9) ldap-mobile : expand: "cn=radius,ou=isp" -> 'cn=radius,ou=isp' > (9) ldap-mobile : Performing search in 'cn=radius,ou=isp' with filter > '(&(mobileradiusCallingStationId=27671946862)(status=10100))' > (9) ldap-mobile : Waiting for search result... > (9) ldap-mobile : User object found at DN "uid=onyebilanma(a)telkomsa.net > ,cn=radius,ou=isp" > (9) ldap-mobile : Processing user attributes > (9) ldap-mobile : reply:User-Name := ' > onyebilanma(a)telkomsa.net > ' > (9) ldap-mobile : control:User-Name := ' > onyebilanma(a)telkomsa.net' > rlm_ldap (ldap-mobile): Released connection (11) > rlm_ldap (ldap-mobile): Opening additional connection (12) > rlm_ldap (ldap-mobile): Connecting to 10.146.46.133:389 > TLSMC: MozNSS compatibility interception begins. > tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is > present. > tlsmc_intercept_initialization: INFO: successfully intercepted TLS > initialization. Continuing with OpenSSL only. > TLSMC: MozNSS compatibility interception ends. > rlm_ldap (ldap-mobile): Waiting for bind result... > rlm_ldap (ldap-mobile): Bind successful > (9) [-ldap-mobile] = ok > (9) ? if (!ok) > (9) ? if (!ok) -> FALSE > (9) } # authorize = ok > (9) Found Auth-Type = Accept > (9) Auth-Type = Accept, accepting the user > (9) Login OK: [27671946862] (from client 105.187.248.220 port 0 cli > 27671946862) > (9) # Executing section post-auth from file /etc/raddb/sites-enabled/mobile > (9) post-auth { > (9) [exec] = noop > (9) remove_reply_message_if_eap remove_reply_message_if_eap { > (9) ? if (reply:EAP-Message && reply:Reply-Message) > (9) ? if (reply:EAP-Message && reply:Reply-Message) -> FALSE > (9) else else { > (9) [noop] = noop > (9) } # else else = noop > (9) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop > (9) update reply { > (9) Acct-Interim-Interval = 14400 > (9) } # update reply = noop > (9) } # post-auth = noop > Sending Access-Accept of id 134 from 10.146.44.71 port 1812 to > 105.187.248.220 port 4017 > User-Name = 'onyebilanma(a)telkomsa.net' > Acct-Interim-Interval = 14400 > > Below is debug from version 3.2.2 > > rlm_ldap (ldap-mobile): Reserved connection (2) > (5) ldap-mobile: EXPAND > (&(mobileradiusCallingStationId=%{Calling-Station-Id})(status=10100)) > (5) ldap-mobile: --> > (&(mobileradiusCallingStationId=27659066168)(status=10100)) > (5) ldap-mobile: Performing search in "cn=radius,ou=isp" with filter > "(&(mobileradiusCallingStationId=27659066168)(status=10100))", scope "sub" > (5) ldap-mobile: Waiting for search result... > (5) ldap-mobile: User object found at DN "uid=ahmed.elhefnawy(a)telkomsa.net > ,cn=radius,ou=isp" > (5) ldap-mobile: Processing user attributes > (5) ldap-mobile: reply:User-Name := 'ahmed.elhefnawy(a)telkomsa.net' > (5) ldap-mobile: control:User-Name := 'ahmed.elhefnawy(a)telkomsa.net' > rlm_ldap (ldap-mobile): Released connection (2) > Need 4 more connections to reach min connections (8) > Need more connections to reach 16 spares > rlm_ldap (ldap-mobile): Opening additional connection (9), 1 of 28 pending > slots used > rlm_ldap (ldap-mobile): Connecting to ldap://10.146.46.133:389 > rlm_ldap (ldap-mobile): Waiting for bind result... > rlm_ldap (ldap-mobile): Bind successful > (5) [ldap-mobile] = updated > (5) if (!ok) { > (5) if (!ok) -> TRUE > (5) if (!ok) { > (5) [reject] = reject > (5) } # if (!ok) = reject > (5) } # authorize = reject > (5) Invalid user: [27659066168] (from client 105.187.248.220 port 0 cli > 27659066168) > (5) Using Post-Auth-Type Reject > (5) # Executing group from file /etc/raddb/sites-enabled/mobile > (5) Post-Auth-Type REJECT { > (5) policy remove_reply_message_if_eap { > (5) if (&reply:EAP-Message && &reply:Reply-Message) { > (5) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE > (5) else { > (5) [noop] = noop > (5) } # else = noop > (5) } # policy remove_reply_message_if_eap = noop > (5) } # Post-Auth-Type REJECT = noop > (5) Login incorrect: [27659066168] (from client 105.187.248.220 port 0 cli > 27659066168) > (5) Delaying response for 2.000000 seconds > > Any advice would be appreciated? > > Regards > Steven > > > ------------------------------ > > Message: 2 > Date: Tue, 21 Feb 2023 17:47:47 -0500 > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: Freeradius Upgrade from 3.0.1 to 3.2.2 > Message-ID: <407E5AF6-AD76-468D-97CD-1D5858D63AC1(a)deployingradius.com> > Content-Type: text/plain; charset=us-ascii > > On Feb 21, 2023, at 4:47 PM, Steven Walters <steven.walters1(a)gmail.com> > wrote: > > Below is debug from version 3.0.1 > > To be honest... 3.0.1 is about ten years old. We're not going to worry > a lot about compatibility with every little piece of it. > > Plus, there have been many bug fixes since then, including security > fixes. If you don't like people attacking your RADIUS server, it should > have been updated regularly. > > ... > > Below is debug from version 3.2.2 > > ... > > (5) [ldap-mobile] = updated > > (5) if (!ok) { > > Change that to: > > if (!ok || !updated) { > ... > > and it will work. > > > Any advice would be appreciated? > > Upgrade regularly. > > Plus, it helps to explain *why* you have this configuration. You > generally don't have to explicitly reject users who don't have passwords. > The server will do this automatically. > > So you don't need a "if not found in LDAP, reject" configuration. Just > check LDAP. If the user isn't found, they won't have a password read from > LDAP. And the server won't be able to authenticate them. > > Alan DeKok. > > > > ------------------------------ > > Message: 3 > Date: Tue, 21 Feb 2023 17:58:56 -0500 > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Some new documentation for "how to make FreeRADIUS do what I > want" > Message-ID: <98543E7C-E533-4DBC-9D27-09E9E9261717(a)deployingradius.com> > Content-Type: text/plain; charset=us-ascii > > We've been busy working on v4, including making sure that every aspect > of the server is extensively documented. > > > I've just written a document on "policies". But it's really "how do I > get this software to do what I want, without going crazy". > > > https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modu… > > It gives a detailed guide to the methods used to create FreeRADIUS > configurations. > > There's also a document on why FreeRADIUS is so complex to configure: > > > https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modu… > > This should help to explain why we can't just have a shiny button which > says "do what I want". The configuration is much, much, more complex than > that. > > v4 also has complete documentation for each unlang keyword: > https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modu… > > This documentation applies to v4, but it's _mostly_ compatible with v3. > Where there are changes from v3, the documentation explains it. > > Hopefully this helps. We're not just wishing that v4 comes out one > day. We're actively working on it. > > Alan DeKok. > > > > ------------------------------ > > Subject: Digest Footer > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > > ------------------------------ > > End of Freeradius-Users Digest, Vol 214, Issue 21 > ************************************************* > -- Warm Regards Steven Walters 0814287179

2 1

Some new documentation for "how to make FreeRADIUS do what I want"
by Alan DeKok 21 Feb '23

21 Feb '23

We've been busy working on v4, including making sure that every aspect of the server is extensively documented. I've just written a document on "policies". But it's really "how do I get this software to do what I want, without going crazy". https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modu… It gives a detailed guide to the methods used to create FreeRADIUS configurations. There's also a document on why FreeRADIUS is so complex to configure: https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modu… This should help to explain why we can't just have a shiny button which says "do what I want". The configuration is much, much, more complex than that. v4 also has complete documentation for each unlang keyword: https://github.com/FreeRADIUS/freeradius-server/blob/master/doc/antora/modu… This documentation applies to v4, but it's _mostly_ compatible with v3. Where there are changes from v3, the documentation explains it. Hopefully this helps. We're not just wishing that v4 comes out one day. We're actively working on it. Alan DeKok.

1 0

Freeradius Upgrade from 3.0.1 to 3.2.2
by Steven Walters 21 Feb '23

21 Feb '23

Hi I am in the process of upgrading our radius servers but have one issue outstanding. Basically we receive in the radius request from mobile a MSISDN. We then go do a lookup to find the username on LDAP matching the MSISDN. In the old version everything works fine but after upgrading the radius responds with access rejection even though MSISDN finds a username on LDAP. Below are extracts from the mobile virtual server file and ldap file. mobile virtual server: # The ldap module reads passwords from the LDAP database. -ldap-mobile if (!ok) { reject ldap: user { # Where to start searching in the tree for users base_dn = "${..base_dn}" # Filter for user objects, should be specific enough # to identify a single user object. #filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" #filter = "(mobileradiusCallingStationId=%{Calling-Station-Id})" filter = "(&(mobileradiusCallingStationId=%{Calling-Station-Id})(status=10100))" Below is debug from version 3.0.1 rlm_ldap (ldap-mobile): Reserved connection (11) (9) ldap-mobile : expand: "(&(mobileradiusCallingStationId=%{Calling-Station-Id})(status=10100))" -> '(&(mobileradiusCallingStationId=27671946862)(status=10100))' (9) ldap-mobile : expand: "cn=radius,ou=isp" -> 'cn=radius,ou=isp' (9) ldap-mobile : Performing search in 'cn=radius,ou=isp' with filter '(&(mobileradiusCallingStationId=27671946862)(status=10100))' (9) ldap-mobile : Waiting for search result... (9) ldap-mobile : User object found at DN "uid=onyebilanma(a)telkomsa.net ,cn=radius,ou=isp" (9) ldap-mobile : Processing user attributes (9) ldap-mobile : reply:User-Name := 'onyebilanma(a)telkomsa.net ' (9) ldap-mobile : control:User-Name := ' onyebilanma(a)telkomsa.net' rlm_ldap (ldap-mobile): Released connection (11) rlm_ldap (ldap-mobile): Opening additional connection (12) rlm_ldap (ldap-mobile): Connecting to 10.146.46.133:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap-mobile): Waiting for bind result... rlm_ldap (ldap-mobile): Bind successful (9) [-ldap-mobile] = ok (9) ? if (!ok) (9) ? if (!ok) -> FALSE (9) } # authorize = ok (9) Found Auth-Type = Accept (9) Auth-Type = Accept, accepting the user (9) Login OK: [27671946862] (from client 105.187.248.220 port 0 cli 27671946862) (9) # Executing section post-auth from file /etc/raddb/sites-enabled/mobile (9) post-auth { (9) [exec] = noop (9) remove_reply_message_if_eap remove_reply_message_if_eap { (9) ? if (reply:EAP-Message && reply:Reply-Message) (9) ? if (reply:EAP-Message && reply:Reply-Message) -> FALSE (9) else else { (9) [noop] = noop (9) } # else else = noop (9) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop (9) update reply { (9) Acct-Interim-Interval = 14400 (9) } # update reply = noop (9) } # post-auth = noop Sending Access-Accept of id 134 from 10.146.44.71 port 1812 to 105.187.248.220 port 4017 User-Name = 'onyebilanma(a)telkomsa.net' Acct-Interim-Interval = 14400 Below is debug from version 3.2.2 rlm_ldap (ldap-mobile): Reserved connection (2) (5) ldap-mobile: EXPAND (&(mobileradiusCallingStationId=%{Calling-Station-Id})(status=10100)) (5) ldap-mobile: --> (&(mobileradiusCallingStationId=27659066168)(status=10100)) (5) ldap-mobile: Performing search in "cn=radius,ou=isp" with filter "(&(mobileradiusCallingStationId=27659066168)(status=10100))", scope "sub" (5) ldap-mobile: Waiting for search result... (5) ldap-mobile: User object found at DN "uid=ahmed.elhefnawy(a)telkomsa.net ,cn=radius,ou=isp" (5) ldap-mobile: Processing user attributes (5) ldap-mobile: reply:User-Name := 'ahmed.elhefnawy(a)telkomsa.net' (5) ldap-mobile: control:User-Name := 'ahmed.elhefnawy(a)telkomsa.net' rlm_ldap (ldap-mobile): Released connection (2) Need 4 more connections to reach min connections (8) Need more connections to reach 16 spares rlm_ldap (ldap-mobile): Opening additional connection (9), 1 of 28 pending slots used rlm_ldap (ldap-mobile): Connecting to ldap://10.146.46.133:389 rlm_ldap (ldap-mobile): Waiting for bind result... rlm_ldap (ldap-mobile): Bind successful (5) [ldap-mobile] = updated (5) if (!ok) { (5) if (!ok) -> TRUE (5) if (!ok) { (5) [reject] = reject (5) } # if (!ok) = reject (5) } # authorize = reject (5) Invalid user: [27659066168] (from client 105.187.248.220 port 0 cli 27659066168) (5) Using Post-Auth-Type Reject (5) # Executing group from file /etc/raddb/sites-enabled/mobile (5) Post-Auth-Type REJECT { (5) policy remove_reply_message_if_eap { (5) if (&reply:EAP-Message && &reply:Reply-Message) { (5) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (5) else { (5) [noop] = noop (5) } # else = noop (5) } # policy remove_reply_message_if_eap = noop (5) } # Post-Auth-Type REJECT = noop (5) Login incorrect: [27659066168] (from client 105.187.248.220 port 0 cli 27659066168) (5) Delaying response for 2.000000 seconds Any advice would be appreciated? Regards Steven

2 1

Version 3.2.2 has been released
by Matthew Newton 16 Feb '23

16 Feb '23

We have today released FreeRADIUS version 3.2.2. Full changelog is in the source at doc/ChangeLog. Some highlights: - Ability to add a header to linelog output files - Config for xlats in rlm_rest - Default configuration improvements, such as attr_filter and SQL. - Thread stats now available from radmin - Clearer "configure" output when building from source - rlm_unbound added to packages and default build - Obsolete Dockerfiles for centos8 and debian9 removed - Fix EAP-TTLS-MSCHAPv2 with TLS 1.3 Download from the usual places: https://freeradius.org/releases/ ftp://ftp.freeradius.org/pub/freeradius/ https://github.com/FreeRADIUS/freeradius-server/releases/tag/release_3_2_2 Packages are available from Network RADIUS: https://packages.networkradius.com/ Docker images are available on Dockerhub. The default Ubuntu Docker image has been bumped from ubuntu20 to ubuntu22: https://hub.docker.com/u/freeradius -- Matthew

1 0