- Freeradius-Users - lists.freeradius.org

Re: PEAP using different CA?
by Alan Buxey 10 Jul '13

10 Jul '13

User a deployment tool as then things like CN checks are done alan

1 0

freeradius using linux user passwd
by Julian Macassey 10 Jul '13

10 Jul '13

I have a Netgear WiFi router set up for WPA2 Enterprise. It is pointed at a freeradius server. I am trying to use the username and password of that server to authenticate. It fails consistenty with: [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. ---------- FreeRADIUS Version 2.1.10, for host x86_64-pc-linux-gnu, built on Sep 24 2012 at 17:58:57 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/dynamic_clients including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/opendirectory including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/plumgrid-radius1/plumgrid-radius1.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "d1sc0verplum" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "d1sc0verplum" nastype = "other" } client 10.1.1.211 { ipaddr = 10.1.1.211 require_message_authenticator = no secret = "d1sc0verplum" shortname = "wifi" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = yes } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } verify { } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/modules/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /etc/freeradius/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/freeradius/modules/digest Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/freeradius/modules/detail detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.1.1.211 port 35032, id=73, length=162 User-Name = "evergreen" NAS-IP-Address = 192.168.1.1 NAS-Port = 0 Called-Station-Id = "28-C6-8E-A4-2B-6A:plum-radius" Calling-Station-Id = "00-1F-5B-C1-AB-24" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x02b1000e0165766572677265656e Message-Authenticator = 0x6f0e884ab22ca3b623c88cb2a8bab823 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[digest] returns noop [suffix] No '@' in User-Name = "evergreen", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /etc/freeradius/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> evergreen attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 73 to 10.1.1.211 port 35032 Waking up in 4.9 seconds. --

3 10

3.0
by David Peterson 09 Jul '13

09 Jul '13

Any ETA on 3.0 being released? David

4 4

Compiling without OpenSSL
by Rahul Godbole 09 Jul '13

09 Jul '13

Hi I cross compile Freeradius 2.1.9 for my embedded device. So far we have been compiling it with OpenSSL and everything works fine. However, I now want to compile it without OpenSSL. Can you tell me hat option I should pass to the configure script for this? I tried using --with-openssl=no and --without-openssl. However, both do not seem to work because I see an error during config that these are unrecognised options. Also, I am trying to use CyaSSL ( cyassl.org ) instead of OpenSSL. Is there are ready config option for using CyaSSL. I see somewhere on the internet that --with-cyassl should work but it does not work for me. Thanks Rahul

2 1

Re: freeradius using linux user passwd
by Alan Buxey 09 Jul '13

09 Jul '13

Read the compatability matrix. Check what EAP method your clients are using versus the password storage method you are using. alan

1 0

freeRADIUS for switch authentication
by Gab Quidilla 09 Jul '13

09 Jul '13

Good day, I've had a freeradius + daloradius + mysql setup to be used for the authentication of our Allied Telesis switches at our different branches. I configured the switch to use radius authentication at Login, could someone check whether the output if radius works on the switch? As there is no access-accept message I received on radiusd -X Password is MD5 encrypted, if that helps. Thanks! ----- Ready to process requests. rad_recv: Accounting-Request packet from host 10.141.1.129 port 49154, id=0, length=84 User-Name = "netops" NAS-IP-Address = 10.141.1.129 Called-Station-Id = "10.141.1.129" Calling-Station-Id = "10.96.100.72" Acct-Status-Type = Start Acct-Session-Id = "0500001F" Acct-Authentic = Local # Executing section preacct from file /etc/raddb/sites-enabled/default +- entering group preacct {...} ++[preprocess] returns ok [acct_unique] WARNING: Attribute NAS-Port was not found in request, unique ID MAY be inconsistent [acct_unique] Hashing ',Client-IP-Address = 10.141.1.129,NAS-IP-Address = 10.141.1.129,Acct-Session-Id = "0500001F",User-Name = "netops"' [acct_unique] Acct-Unique-Session-ID = "b320652fa80c290b". ++[acct_unique] returns ok [suffix] No '@' in User-Name = "netops", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[files] returns noop # Executing section accounting from file /etc/raddb/sites-enabled/default +- entering group accounting {...} [detail] expand: %{Packet-Src-IP-Address} -> 10.141.1.129 [detail] expand: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /var/log/radius/radacct/10.141.1.129/detail-20130708 [detail] /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/radius/radacct/10.141.1.129/detail-20130708 [detail] expand: %t -> Mon Jul 8 14:12:31 2013 ++[detail] returns ok ++[unix] returns noop [radutmp] expand: /var/log/radius/radutmp -> /var/log/radius/radutmp [radutmp] expand: %{User-Name} -> netops rlm_radutmp: No NAS-Port seen. Cannot do anything. rlm_radumtp: WARNING: checkrad will probably not work! ++[radutmp] returns noop [sql] expand: %{User-Name} -> netops [sql] sql_set_user escaped user --> 'netops' [sql] expand: %{Acct-Delay-Time} -> [sql] ... expanding second conditional [sql] expand: INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', rlm_sql (sql): Reserving sql socket id: 3 rlm_sql (sql): Released sql socket id: 3 ++[sql] returns ok ++[exec] returns noop [attr_filter.accounting_response] expand: %{User-Name} -> netops attr_filter: Matched entry DEFAULT at line 12 ++[attr_filter.accounting_response] returns updated Sending Accounting-Response of id 0 to 10.141.1.129 port 49154 Finished request 0. Cleaning up request 0 ID 0 with timestamp +72 Going to the next request Ready to process requests.

2 6

group authorization and ldap
by Brendan Kearney 09 Jul '13

09 Jul '13

list members, i am working on having radius perform authorization based on group membership in ldap. i am able to authenticate the user using the kerberos module, and can attach to ldap using the ldap module. what i would like to do is have a group in ldap that provides a radiusReplyItem value, instead of having the radiusReplyItem as a users attribute. effectively what i am attempting to accomplish is: by placing a user in the group, the authorization string provided in the radiusReplyItem would be given to hosts, removing the need to supply the radiusReplyItem on a per-user basis. i have found this write up: http://www.clearfoundation.com/docs/howtos/setting_up_radius_to_use_ldap but it does not work. i am using freeradius v 2.2.0 on fedora 16, with openldap 2.4.26 and kerberos5 1.9.4. the device pointing at radius is a cisco sg300-28. i am able to sign in right now, pointing at kerberos for auth, and providing the authorization string out of my user object in ldap. any pointers towards how i can accomplish this would be appreciated. thanks in advance, brendan

2 1

MS-CHAP2 fails - samba version?
by Lovaas,Steven 08 Jul '13

08 Jul '13

Hello everyone, I’m trying to bring up a fresh instance using 2.2.0, rather than just cloning old 1.x configs as has been done in previous upgrades. In building a new Ubuntu server, I grabbed the latest available build of samba (3.6.3); I’ve read that a version of at least version 3.5.4 is required to work with Windows Server 2008 r2 AD. Compatibility with 2008 r2 is what is driving this upgrade. Working from the Deploying Radius site, I’ve made good progress. So far, the directions have been clear and everything has worked well. I even took the opportunity to learn mercurial along the way… thanks ☺. I also created two virtual servers, to support different policies for our main campus wireless and eduroam. That also seems to be working well, with one SSID pointing to each virtual server… slick! Ntlm works: /usr/bin/ntlm_auth --request-nt-key --domain=COLOSTATE --username=slovaas password: NT_STATUS_OK: Success (0x0) root@freerad13:/etc/freeradius/modules# Winbind looks OK, though only the challenge/response version of authentication… that’s normal?: wbinfo -a slovaas Enter slovaas's password: plaintext password authentication failed Could not authenticate user slovaas with plaintext password Enter slovaas's password: challenge/response password authentication succeeded root@freerad13:/etc/freeradius# And with a forced default ntlm_auth in the users file, I can authenticate with radtest. But here’s where I’m stuck. When I remove the default ntlm_auth line in the users file and put the ntlm_auth line in mschap, I no longer get access_accept. The debug of the request is pasted below. But I wondered… basic authentication is working (with ntlm_auth) but mschap doesn’t get what it wants back (using ntlm_auth), which sounds like an issue that was around in earlier versions of samba. Before I go downgrading samba, though, I was wondering if anyone saw anything I missed or had any other suggestions. Thanks, Steve =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.07.08 07:43:48 =~=~=~=~=~=~=~=~=~=~=~= rad_recv: Access-Request packet from host 127.0.0.1 port 35685, id=59, length=133 User-Name = "slovaas" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 Message-Authenticator = 0x160e7734756ad5899a83bbc504bd937c MS-CHAP-Challenge = 0x105268b03ae9b2ee MS-CHAP-Response = 0x00010000000000000000000000000000000000000000000000003487554c3d3f147c69f03fcc12fd5535dff2c0be3d5bbc10 server eid-dot11i { # Executing section authorize from file /etc/freeradius/sites-enabled/eid-dot11i +- entering group authorize {...} ++- entering policy filter_username_csu {...} +++? if (User-Name != "%{tolower:%{User-Name}}") expand: %{User-Name} -> slovaas expand: %{tolower:%{User-Name}} -> slovaas ? Evaluating (User-Name != "%{tolower:%{User-Name}}") -> FALSE +++? if (User-Name != "%{tolower:%{User-Name}}") -> FALSE +++? if (User-Name =~ / /) ? Evaluating (User-Name =~ / /) -> FALSE +++? if (User-Name =~ / /) -> FALSE +++? if (User-Name =~ /@(.+)?@/i ) ? Evaluating (User-Name =~ /@(.+)?@/i) -> FALSE +++? if (User-Name =~ /@(.+)?@/i ) -> FALSE +++? if (User-Name =~ /\\.\\./ ) ? Evaluating (User-Name =~ /\\.\\./) -> FALSE +++? if (User-Name =~ /\\.\\./ ) -> FALSE ++- policy filter_username_csu returns notfound ++[preprocess] returns ok [auth_log] expand: %{Packet-Src-IP-Address} -> 127.0.0.1 [auth_log] expand: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/127.0.0.1/auth-detail-20130708 [auth_log] /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/127.0.0.1/auth-detail-20130708 [auth_log] expand: %t -> Mon Jul 8 07:45:04 2013 ++[auth_log] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok ++[digest] returns noop [suffix] No '@' in User-Name = "slovaas", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = MSCHAP # Executing group from file /etc/freeradius/sites-enabled/eid-dot11i +- entering group MS-CHAP {...} [mschap] Client is using MS-CHAPv1 with NT-Password [mschap] expand: %{Stripped-User-Name} -> [mschap] ... expanding second conditional [mschap] expand: %{User-Name} -> slovaas [mschap] expand: %{%{User-Name}:-None} -> slovaas [mschap] expand: --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} -> --username=slovaas [mschap] mschap1: 10 [mschap] expand: %{mschap:Challenge} -> 105268b03ae9b2ee [mschap] expand: --challenge=%{%{mschap:Challenge}:-00} -> --challenge=105268b03ae9b2ee [mschap] expand: %{mschap:NT-Response} -> 3487554c3d3f147c69f03fcc12fd5535dff2c0be3d5bbc10 [mschap] expand: --nt-response=%{%{mschap:NT-Response}:-00} -> --nt-response=3487554c3d3f147c69f03fcc12fd5535dff2c0be3d5bbc10 Exec-Program output: Reading winbind reply failed! (0xc0000001) Exec-Program-Wait: plaintext: Reading winbind reply failed! (0xc0000001) Exec-Program: returned: 1 [mschap] External script failed. [mschap] MS-CHAP-Response is incorrect. ++[mschap] returns reject Failed to authenticate the user. } # server eid-dot11i Using Post-Auth-Type REJECT # Executing group from file /etc/freeradius/sites-enabled/eid-dot11i +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> slovaas attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 59 to 127.0.0.1 port 35685 MS-CHAP-Error = "\000E=691 R=1" Waking up in 4.9 seconds. Cleaning up request 0 ID 59 with timestamp +96 Ready to process requests.

3 3

Re: Re[2]: acct_users
by Alan Buxey 08 Jul '13

08 Jul '13

Yes, issues can appear in new code as well as get fixed. Known problems in 2.2.0 will be solved in 2.2.1 which is near/ready for release alan

1 0

acct_users
by Юрий Колесник 08 Jul '13

08 Jul '13

Тема: acct_users Hi Have some proublem with accounting files on version 2.2.0 . I use standard dictionary 3GPP2, but attribut 3GPP2-PCF-IP-Address was ignored in acct_users file. etc/acct_users DEFAULT Acct-Session-Time == "0", Acct-Type := TEST0 DEFAULT Framed-IP-Address =~ "172.16", Acct-Type := BLOCKED DEFAULT 3GPP2-PCF-IP-Address =~ "10.223.[45]", NAS-IP-Address =~ "10.123.66.5", Acct-Type := ASREVDO DEFAULT 3GPP2-PCF-IP-Address =~ "10.123.65", NAS-IP-Address =~ "10.123.66", Acct-Type := KUB DEFAULT Acct-Type := OTHER etc/modules/detail detail TEST { detailfile = ${radacctdir}/files/blocked/blocked.%Y%m detailperm = 0640 locking = yes } detail TEST0 { detailfile = ${radacctdir}/files/nullsession/nullsession.%Y%m detailperm = 0640 locking = yes } detail KUB { detailfile = ${radacctdir}/files/onex/kub.aaadb1.onex detailperm = 0640 locking = yes } detail ASREVDO { detailfile = ${radacctdir}/files/evdoasr/kubasr.aaadb1.evdo detailperm = 0640 locking = yes } detail OTHER { detailfile = ${radacctdir}/files/other/%{NAS-IP-Address}_other/other.%{NAS-IP-Address}.%Y%m detailperm = 0640 locking = yes } My accounting files was created as OTHER, but there must have been in ASREVDO. For example, radclient: [root@aaa-db1 radtest]# ./radtestacct.sh |more Sending Accounting-Request of id 7 to 127.0.0.1 port 1813 User-Name = "mobile" Calling-Station-Id = "250091000211350" NAS-IP-Address = 10.123.66.5 Acct-Status-Type = Interim-Update Acct-Session-Id = "50D406FD" 3GPP2-Correlation-Id = "o095O8hM" NAS-Identifier = "asr5k-krd" SN-Software-Version = "10.0 (36820)" 3GPP2-BSID = "2D0C00010701" 3GPP2-Attr-41 = 0x000b32c1 3GPP2-Service-Option = 59 3GPP2-User-Id = 0 3GPP2-ESN = "0159E33E" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port-Type = Wireless-Other 3GPP2-PCF-IP-Address = 10.223.4.6 Acct-Authentic = RADIUS SN-Local-IP-Address = 77.243.240.221 SN-Primary-DNS-Server = 77.243.240.230 SN-Secondary-DNS-Server = 77.243.240.231 SN-VPN-Name = "ISP" SN-Primary-NBNS-Server = 0.0.0.0 SN-Secondary-NBNS-Server = 0.0.0.0 Framed-Compression = None SN-PPP-Data-Compression = None SN-VPN-ID = 3 3GPP2-IP-Technology = 1 3GPP2-Compulsory-Tunnel-Indicator = 0 SN-Proxy-MIP = 0 Framed-MTU = 1500 3GPP2-Attr-78 = 0x00000000 SN-PPP-Data-Compression-Mode = Normal 3GPP2-Forward-FCH-Mux-Option = 0 3GPP2-Reverse-FCH-Mux-Option = 0 3GPP2-Forward-Traffic-Type = 0 3GPP2-Reverse-Traffic-Type = 0 3GPP2-FCH-Frame-Size = 0 3GPP2-Forward-FCH-RC = 0 3GPP2-Reverse-FCH-RC = 0 3GPP2-Airlink-Priority = 0 3GPP2-Airlink-Sequence-Number = 5 3GPP2-Airlink-Record-Type = 2 3GPP2-Bad-PPP-Frame-Count = 0 3GPP2-Number-Active-Transitions = 130 3GPP2-Terminating-SDB-Octet-Count = 0 3GPP2-Originating-SDB-OCtet-Count = 0 3GPP2-Terminating-Number-SDBs = 0 3GPP2-Originating-Number-SDBs = 0 3GPP2-Received-HDLC-Octets = 14106 3GPP2-Active-Time = 2040 Acct-Input-Packets = 109 Acct-Output-Packets = 268 3GPP2-Attr-162 = 0x00000000 3GPP2-Attr-163 = 0x00000000 3GPP2-Attr-164 = 0x00000000 3GPP2-Attr-165 = 0x00000000 SNA-PPP-Unfr-data-In-Oct = 11438 SNA-PPP-Unfr-data-Out-Oct = 35850 Acct-Session-Time = 3600 3GPP2-Session-Continue = 1 3GPP2-Last-User-Activity-Time = 1373257676 SNA-PPP-Ctrl-Input-Octets = 23602 SNA-PPP-Ctrl-Output-Octets = 28240 SNA-PPP-Ctrl-Input-Packets = 2346 SNA-PPP-Ctrl-Output-Packets = 2347 SNA-PPP-Framed-Input-Octets = 6446541 SNA-PPP-Framed-Output-Octets = 93404564 SNA-PPP-Discards-Input = 107 SNA-PPP-Errors-Input = 107 SNA-PPP-Bad-FCS = 107 SNA-PPP-Echo-Req-Input = 2335 SNA-PPP-Echo-Rsp-Output = 2335 SNA-RPRRQ-Rcvd-Total = 4448 SNA-RPRRQ-Rcvd-Acc-Reg = 4448 SNA-RPRRQ-Rcvd-Acc-Dereg = 39 SNA-RPRAK-Rcvd-Total = 60 SNA-RPRAK-Rcvd-Acc-Ack = 40 SNA-RPRAK-Rcvd-Mis-ID = 20 SNA-RP-Reg-Reply-Sent-Total = 4448 SNA-RP-Reg-Reply-Sent-Acc-Reg = 4448 SNA-RP-Reg-Reply-Sent-Acc-Dereg = 39 SNA-RP-Reg-Upd-Sent = 60 SNA-RP-Reg-Upd-Re-Sent = 20 Event-Timestamp = "Jul 8 2013 08:28:23 MSK" 3GPP2-Service-Reference-Id = 0x0104000102040001 Framed-IP-Address = 94.77.22.81 Framed-IP-Netmask = 255.255.255.255 Starent-Attr-24 = 0x00000001 Acct-Input-Octets = 11438 Acct-Output-Octets = 35850 NAS-Port = 666631 rad_recv: Accounting-Response packet from host 127.0.0.1 port 1813, id=7, length=20 In radius.log Waking up in 0.9 seconds. Thread 3 handling request 0, (1 handled so far) [<thread>] # Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default [<thread>] +- entering group preacct {...} [preprocess] expand: %{NAS-IP-Address} -> 10.123.66.5 [preprocess] expand: %{Calling-Station-Id} -> 250091000211350 [preprocess] WARNING: Unknown module "3GPP2-BSID" in string expansion "%" [preprocess] WARNING: Unknown module "3GPP2-BSID" in string expansion "%" [preprocess] expand: %{Calling-Station-Id} -> 250091000211350 [preprocess] expand: %{Calling-Station-Id} -> 250091000211350 [preprocess] expand: %{Calling-Station-Id} -> 250091000211350 ++[preprocess] returns ok [suffix] No '@' in User-Name = "mobile", looking up realm NULL [suffix] Found realm "NULL" [suffix] Adding Stripped-User-Name = "mobile" [suffix] Adding Realm = "NULL" [suffix] Accounting realm is LOCAL. ++[suffix] returns ok [files] expand: %{User-Name} -> mobile [files] expand: %{Framed-IP-Address} -> 94.77.22.81 [files] WARNING: Unknown module "3GPP2-PCF-IP-Address" in string expansion "%" [files] WARNING: Unknown module "3GPP2-PCF-IP-Address" in string expansion "%" [files] acct_users: Matched entry DEFAULT at line 42 ++[files] returns ok Found Acct-Type OTHER # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group OTHER {...} [acct_unique] Hashing 'Calling-Station-Id = "250091000211350",3GPP2-Correlation-Id = "o095O8hM",Acct-Session-Id = "50D406FD"' [acct_unique] Acct-Unique-Session-ID = "327c0b6a3c7b490e". ++[acct_unique] returns ok ++- entering group {...} [OTHER] expand: /usr/local/var/log/radius/radacct/files/other/%{NAS-IP-Address}_other/other.%{NAS-IP-Address}.%Y%m -> /usr/local/var/log/radius/radacct/files/other/10.123.66.5_other/other.10.123.66.5.201307 [OTHER] /usr/local/var/log/radius/radacct/files/other/%{NAS-IP-Address}_other/other.%{NAS-IP-Address}.%Y%m expands to /usr/local/var/log/radius/radacct/files/other/10.123.66.5_other/other.10.123.66.5.201307 [OTHER] Acquired filelock, tried 1 time(s) [OTHER] expand: %t -> Mon Jul 8 14:38:43 2013 +++[OTHER] returns ok ++- group returns ok Finished request 0. This configuration work normal on my old 2.1.3 version radius, but 2.2.0 don't like number as the first character of an attribute expansion. Every time see [files] WARNING: Unknown module "3GPP2-PCF-IP-Address" in string expansion "%" Similar problem in this list : http://lists.freeradius.org/pipermail/freeradius-users/2012-November/064050… This is strange but in 2.2.0 this problem should not be. I use standard dictionary ---------------------------------------------------------------------- -- Юрий Колесник

2 2