- Freeradius-Users - lists.freeradius.org

dialupadmin and php5
by Sergio Belkin 07 Jun '13

07 Jun '13

Hi folks, I'd want to know is anyone is using dialupadmin along with php5.. Thanks in advance! -- -- Sergio Belkin http://www.sergiobelkin.com Watch More TV http://sebelk.blogspot.com LPIC-2 Certified - http://www.lpi.org

1 0

WARNING: Unknown value specified for Post-Auth-Type
by Russell Mike 07 Jun '13

07 Jun '13

Hi, It is not default virtual server). Following error occurs, when user attempt to login with invalid password, otherwise not. is it normal? or should be troubleshooted. Info: WARNING: Unknown value specified for Post-Auth-Type. Cannot perform requested action My postauth section post-auth { sql exec Post-Auth-Type REJECT { attr_filter.access_reject noop notfound } } Thanks / Regards --RM

1 0

Huntgroups checking in MySQL radgroupcheck
by Marco Marzetti 07 Jun '13

07 Jun '13

Hello, I'm unable to sort out this problem. Googling didn't help and i've not been able to find a satisfying answer on the official documentation. I would like to store my users in MySQL and assign all of them to the same Huntgroup. Here's my database: mysql> SELECT * FROM radcheck; +----+----------+--------------------+----+-------+ | id | username | attribute | op | value | +----+----------+--------------------+----+-------+ | 1 | foo | Cleartext-Password | := | bar | +----+----------+--------------------+----+-------+ 1 row in set (0.00 sec) mysql> SELECT * FROM radusergroup; +----------+-----------+----------+ | username | groupname | priority | +----------+-----------+----------+ | foo | TECNICI | 1 | +----------+-----------+----------+ 1 row in set (0.00 sec) mysql> SELECT * FROM radgroupcheck; +----+-----------+----------------+----+----------+ | id | groupname | attribute | op | value | +----+-----------+----------------+----+----------+ | 1 | TECNICI | Huntgroup-Name | == | APPARATI | +----+-----------+----------------+----+----------+ 1 row in set (0.01 sec) According the to debug below i would expect the user "foo" to be associated to the huntgroup APPARATI, and the request to be rejected because of the absence of the proper NAS-IP-Address in the said huntgroup. Here a dump of /etc/freeradius/huntgroups : root@tango:~# cat /etc/freeradius/huntgroups | grep APPARATI APPARATI NAS-IP-Address =~ 192.0.2.[0-9] Anyway, as you can see in the log below, the request is accepted and the user is authenticated. As a side note the request is rejected when i put the user foo in the huntgroup "APPARATI" in the radcheck table. ie: INSERT INTO radcheck VALUES ( NULL, "foo", "Huntgroup-Name", "==", "APPARATI" ) Can You, please, help? FreeRADIUS Version 2.1.8, for host i486-pc-linux-gnu, built on Jan 5 2010 at 02:49:11 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/sql.conf including configuration file /etc/freeradius/sql/mysql/dialup.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/etc/freeradius/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_sql Module: Instantiating sql sql { driver = "rlm_sql_mysql" server = "localhost" port = "" login = "root" password = "superpipp0" radius_db = "freeradius" read_groups = yes sqltrace = no sqltracefile = "/var/log/freeradius/sqltrace.sql" readclients = no deletestalesessions = yes num_sql_socks = 5 lifetime = 0 max_queries = 0 sql_user_name = "%{User-Name}" default_user_profile = "DEFAULT" nas_query = "SELECT id, nasname, shortname, type, secret FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('% S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('% S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to root@localhost:/freeradius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-% Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 53653, id=63, length=55 User-Name = "foo" User-Password = "bar" NAS-IP-Address = 127.0.1.1 NAS-Port = 1 +- entering group authorize {...} [preprocess] expand: %{NAS-IP-Address} -> 127.0.1.1 [preprocess] expand: %{NAS-IP-Address} -> 127.0.1.1 [preprocess] expand: %{NAS-IP-Address} -> 127.0.1.1 [preprocess] expand: %{NAS-IP-Address} -> 127.0.1.1 [preprocess] expand: %{NAS-IP-Address} -> 127.0.1.1 [preprocess] expand: %{NAS-IP-Address} -> 127.0.1.1 [preprocess] expand: %{NAS-IP-Address} -> 127.0.1.1 ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "foo", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop [sql] expand: %{User-Name} -> foo [sql] sql_set_user escaped user --> 'foo' rlm_sql (sql): Reserving sql socket id: 4 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'foo' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'foo' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'foo' ORDER BY priority [sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'TECNICI' ORDER BY id [sql] Checking profile DEFAULT [sql] sql_set_user escaped user --> 'DEFAULT' [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'DEFAULT' ORDER BY priority rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns updated Found Auth-Type = PAP +- entering group PAP {...} [pap] login attempt with password "bar" [pap] Using clear text password "bar" [pap] User authenticated successfully ++[pap] returns ok +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 63 to 127.0.0.1 port 53653 Finished request 0. Going to the next request Waking up in 4.9 seconds.

2 5

FreeRadius with Jradius module
by ZHOU Eric JP 07 Jun '13

07 Jun '13

Hi All, Currently we are planning to use FreeRadius with Jradius server. But I find Jradius is not well supported by FreeRadius. We have to copy jradius.conf and rlm_jradius.c from Jradius package to FreeRadius package to build the module. Furthermore many FreeRadius versions do not support Jradius at all. So I'd like to see if any people have the same problem with me? And how do you handle this? And I would like to know if Jradius would be supported in later releases? Thanks, Eric

2 2

noresetcounter
by Bill Schoolfield 06 Jun '13

06 Jun '13

Hello all, I'm trying to use rlm_sqlcounter to disable login once time exceeded together with unlang to set Session-Timeout. I can get either to work but having trouble getting both to work. Right now the Session-Timeout (computed below in the post auth section) works fine. update reply { Session-Timeout := "%{expr: %{check:Max-All-Session-Time}-%{sql:select sum(acctsessiontime) from radacct where username='%{User-Name}'}}" } The radacct table is populated and the session timeout is computed properly across logins. But the check provide by the below setup fails to prevent login (auth) when the time goes to zero. sqlcounter noresetcounter { counter-name = Max-All-Session-Time check-name = Max-All-Session sqlmod-inst = sql key = User-Name reset = never query = "SELECT IFNULL(SUM(AcctSessionTime),0) FROM radacct WHERE UserName='%{%k}'" } My test radcheck table looks like: mysql> select * from radcheck; +----+----------+----------------------+----+---------+ | id | username | attribute | op | value | +----+----------+----------------------+----+---------+ | 1 | wrs | Cleartext-Password | := | test123 | | 2 | wrs | Max-All-Session-Time | := | 600 | +----+----------+----------------------+----+---------+ I can provide the whole radiusd -X log if this is not enough info; Bill

1 1

module-failure-message in exec module
by Franks Andy (RLZ) IT Systems Engineer 06 Jun '13

06 Jun '13

Hi all, Trying to use the provided ntlm_auth exec module to authenticate users where the NAS uses pap, which works fine. I just want to improve my error reporting and pick up the return string from the failure of the module, .e.g - Exec plaintext: NT_STATUS_WRONG_PASSWORD: Wrong Password (0xc000006a) Looking around on the internet it seems I might use something like: Auth-Type NTLM_AUTH { ntlm_auth if (ok) { } else { update reply { reply-message += "%{Module-Failure-Message}" } } } But the else statement never seems to get processed : Exec output: NT_STATUS_WRONG_PASSWORD: Wrong Password (0xc000006a) Exec plaintext: NT_STATUS_WRONG_PASSWORD: Wrong Password (0xc000006a) [ntlm_auth] Exec: program returned: 1 ++[ntlm_auth] returns reject Using Post-Auth-Type REJECT # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group REJECT {...} Questions are - does the exec module return to the Module-Failure-Message variable or another I can use, and why doesn't it process the subsection of the auth-type section on failure? Thanks Andy

2 1

EAP error with Freeradius 3.0
by nicolas.clo＠ricoh-industrie.fr 06 Jun '13

06 Jun '13

Hello, I have a problem with mschap authentication and the external program ntlm_auth. With Freeradius 2.2 I haven't any problem but after upgrade to Freeradius 3, the output of this program was wrong and EAP failed. The output is very strange : Any ideas ?

2 1

Service Provisioning Using AAA (FreeRadius)
by Russell Mike 06 Jun '13

06 Jun '13

Dear FreeRadius Gurus Greetings, I work with an ISP, i have been asked to research about "service provisioning using AAA". I am NOT very new to FreeRadius. Have implemented and managing central CoovaChilli hotspot solution where we run more than 35 hotspots across the city using CoovaChilli + Freeradius. Currently, We do manually connection / disconnection. If a customer did not pay until 31st, somebody manually disconnect the link. And manually connect when customer comes to pay. i am somehow not clear with the idea, how that would work and where to start from. I am looking for advice from those have already setup such system. Any kind of help would be highly appreciated. i am further willing to study, if i know which direction to move on. Someone please help Thanks / Regards --RM

7 15

EAP-SIM Authentication
by Kranthi K 06 Jun '13

06 Jun '13

Hi All, I am Newbie to free radius. I installed freeradius version 2.2.0. i want to configure the EAP-SIM Authentication. Can anyone tell me the steps how to implement it. Thanks Kranthi

2 2

Override EAP invalid result in authentication section
by PENZ Robert 05 Jun '13

05 Jun '13

Hi! I want to configure Freeradius (freeradius-2.1.12-4.el6_3) to authenticate failed EAP-TLS requests (from authorized MACs) to a remediation VLAN and not reject them to the guest VLAN. My config looks like this: authorize { .... # we don't know the MAC .... reject it to the guest net if (!ok) { update control { MACAU-Reason := "MAC address not in DB" } reject } # if not 802.1x its only MAC auth if (!EAP-Message) { # mac has already been checked, accept (it gets into the remediation VLAN) update control { Auth-Type := Accept MACAU-Reason := "only MAC, no 802.1x" } } else { # we're in the 802.1x path .... continued in the authenticate section eap } .... } authenticate { .... Auth-Type EAP { eap { handled = 1 invalid = 1 } if (ok) { # update VLAN to production client network # this part works perfectly } else { # EAP didn't work if (EAP-Type == "NAK") { update control { MACAU-Reason := "unsupported EAP typ --> Client misconfiguration" Auth-Type := Accept } } else { update control { MACAU-Reason := "certificate invalid (e.g. revoked/expired)" Auth-Type := Accept } } ok <----- does not work } I just need an accept here, the VLAN which will be returned is already the remediation VLAN (as it is the same as if the client uses only MAC authentication). Currently the client gets rejected if e.g. the certificate is expired as the client has not been in the network for some time. MACAU-Reason is logged to the DB in post-auth. This is the log: Mon May 27 15:17:55 2013 : Info: [tls] eaptls_process returned 4 Mon May 27 15:17:55 2013 : Info: [eap] Handler failed in EAP/tls Mon May 27 15:17:55 2013 : Info: [eap] Failed in EAP select Mon May 27 15:17:55 2013 : Info: ++[eap] returns invalid Mon May 27 15:17:55 2013 : Info: ++? if (ok) Mon May 27 15:17:55 2013 : Info: ? Evaluating (ok) -> FALSE Mon May 27 15:17:55 2013 : Info: ++? if (ok) -> FALSE Mon May 27 15:17:55 2013 : Info: ++- entering else else {...} Mon May 27 15:17:55 2013 : Info: +++? if (EAP-Type == "NAK") Mon May 27 15:17:55 2013 : Info: ? Evaluating (EAP-Type == "NAK") -> FALSE Mon May 27 15:17:55 2013 : Info: +++? if (EAP-Type == "NAK") -> FALSE Mon May 27 15:17:55 2013 : Info: +++- entering else else {...} Mon May 27 15:17:55 2013 : Info: ++++[control] returns invalid Mon May 27 15:17:55 2013 : Info: +++- else else returns invalid Mon May 27 15:17:55 2013 : Info: ++- else else returns invalid Mon May 27 15:17:55 2013 : Info: Failed to authenticate the user. Mon May 27 15:17:55 2013 : Auth: Login incorrect (TLS Alert write:fatal:certificate unknown): [host/xxxxxxxxxxxxx/<via Auth-Type = Accept>] (from client xxxxxxxx port xxxx cli xxxxxxxxxxxxxxx) Mon May 27 15:17:55 2013 : Info: Using Post-Auth-Type Reject I hope someone can help me. Thx! Mit freundlichen Grüßen Robert Penz -------------------------------------------------------------- Dipl.Inf. Robert Penz DVT - Daten-Verarbeitung-Tirol GmbH Adamgasse 22, 6020 Innsbruck Tel: +43 (0)512 508 3334 / Fax: +43 (0)512 508 74 3355 E-Mail: robert.penz(a)tirol.gv.at

3 8