- Freeradius-Users - lists.freeradius.org

Understanding the IP Pool module
by Бен Томпсон 13 Feb '13

13 Feb '13

Hello Everyone I am hoping to use rlm_ippool and I would like to understand a bit about how it works. Firstly I want to understand the format of the database. I can see from the output of rlm_ippool_tool that there are five columns :- Key | IP Address | Active | CLI | Num It is obvious what the first two are, and I am not sure about the last three, but I guess that "active" means that this address is in use. Could anyone explain to me what the columns "cli" and "num" are used for? I noticed that this module is called from the post-auth and accounting sections, and in the accounting section of sites-available/default there is the following comment :- # Return an address to the IP Pool when we see a stop record. Does this mean that the ippool module sets "active" to 0 when it sees an accounting Stop from the same "Key"? Also, I noticed that this module can be used for DHCP which obviously does not have an accounting section. Does this mean that IP addresses can never be deallocated from the pool? Thanks in advance for any help. Ben

3 4

Upgrading from FR 2.1.10 to 2.2.x
by Jamie Lee 13 Feb '13

13 Feb '13

Hello, I've just completed the configuration of a 2.1.10 free radius server on CentOS 6.2 and want to upgrade to FR 2.2.x to remove the vulnerability. Does anyone have a guide or any advice on what I need to do and back up in order to ensure that I don't lose any of my site specific settings. I have configured it to work with AD using NTLM_Auth and Samba. Many thanks Jamie Jamie Lee Senior Infrastructure Development and Support Officer IT Services Department Goldsmiths, University of London

2 1

Load Balancing
by Muhammad Nadeem 13 Feb '13

13 Feb '13

Hi, I am new to freeradius. I wantto implement load balancing on freeradius servers (not on backend database). I want that if a bulk of requests are received, these requests should be distributed evenly among multiple freeradius servers. Can any one please tell me, how could i achieve this goal. Thanks in advance

7 18

Stess test
by QASIM RAO 13 Feb '13

13 Feb '13

Hi,i am using free radius for billing perpose of my application... i m am facing problem in stress testing on my local RADIUS server. that when i send 100 suncurent accounting request. in non-debug mode. but when i moniter mysql connections by using mysql adminstrator mysql connections suddenly increases arround hundred. which causes increase in process time of each time . pelase help me in this. Qasim

2 1

Re: Upgrading from FR 2.1.10 to 2.2.x
by Alan Buxey 13 Feb '13

13 Feb '13

First, check that centos doesn't have the security issue backported For upgrade, backup your current configuration directory eg cp -R /etc/raddb /etc/raddb.backup Then install the new version 2.1.10 and 2.2.0 are config compatible apart from one single option which isn't set by default (check the release notes). Freeradius install will not touch files that already exist...so you won't get any new options/comments in your config files so may lose visibility of any new features in that regard...but new config files and modules and virtual servers will appear in your config. So, radiusd -X of your current server , capture the startup output, then do the same again after the upgrade and compare the difference. alan

1 0

pam.d ssh radius
by T W 12 Feb '13

12 Feb '13

All, I got this working at the end of last year, but now I've having trouble. I'm setting up SSH access using RADIUS auth on a Ubuntu 12.10 system. Im using the latest version of libpam-radius-auth (1.3.17-0ubuntu4) and have followed the readme along with many other explanations and can not get it working. I'm getting the same error even when I try on different VM's running different versions of Ubuntu. The error "PAM (sshd) illegal module type: auth" makes it sound like it does not support the auth method. Anyone else run into this? #cat pam_radius_auth.conf 10.1.1.1 sharedsec 3 #cat /etc/pam.d/sshd # PAM configuration for the Secure Shell service # Read environment variables from /etc/environment and # /etc/security/pam_env.conf. auth required pam_env.so # [1] # In Debian 4.0 (etch), locale-related environment variables were moved to # /etc/default/locale, so read that as well. auth required pam_env.so envfile=/etc/default/locale auth required /lib/security/pam_radius_auth.so debug # Standard Un*x authentication. #@include common-auth /var/log/auth.log Feb 12 13:28:48 T3500 sshd[13374]: PAM (sshd) illegal module type: auth Feb 12 13:28:48 T3500 sshd[13374]: PAM pam_parse: expecting return value; [...required ] Feb 12 13:28:50 T3500 sshd[13374]: Failed password for bob from 1.1.1.1 port 47653 ssh2 Feb 12 13:28:51 T3500 sshd[13374]: Connection closed by 1.1.1.1 [preauth]

3 2

DHCP reply don't go out
by Michele Pinassi 12 Feb '13

12 Feb '13

Hi all, i've just installed a FreeRadius server 2.2.0 with DHCP support because i need a dhcp server that use MySQL ad a backend. My network topology is: eth0 inet addr:193.205.4.xxx [PUBLIC] eth1 inet addr:172.20.1.2 [PRIVATE] all dhcp requests and reply should come from eth1. Here is freeradius -X dump: FreeRADIUS Version 2.2.0, for host i486-pc-linux-gnu, built on Sep 20 2012 at 13:37:59 Copyright (C) 1999-2012 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/smsotp including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/ldap including configuration file /etc/freeradius/mods-enabled/counter including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/otp including configuration file /etc/freeradius/mods-enabled/inner-eap including configuration file /etc/freeradius/mods-enabled/acct_unique including configuration file /etc/freeradius/mods-enabled/wimax including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/etc_group including configuration file /etc/freeradius/mods-enabled/redis including configuration file /etc/freeradius/mods-enabled/cui including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/cache including configuration file /etc/freeradius/mods-enabled/mac2ip including configuration file /etc/freeradius/mods-enabled/dhcp_sqlippool including configuration file /etc/freeradius/sql/mysql/ippool-dhcp.conf including configuration file /etc/freeradius/mods-enabled/policy including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/smbpasswd including configuration file /etc/freeradius/mods-enabled/ippool including configuration file /etc/freeradius/mods-enabled/rediswho including configuration file /etc/freeradius/mods-enabled/pam including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/detail.example.com including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/mac2vlan including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/checkval including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/krb5 including configuration file /etc/freeradius/mods-enabled/sql_log including configuration file /etc/freeradius/mods-enabled/attr_rewrite including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/perl including configuration file /etc/freeradius/mods-enabled/radrelay including configuration file /etc/freeradius/mods-enabled/sqlcounter_expire_on_login including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/opendirectory including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/sql.conf including configuration file /etc/freeradius/sqlippool.conf including configuration file /etc/freeradius/sql/mysql/ippool.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/dhcp including configuration file /etc/freeradius/sites-enabled/default main { user = "root" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/mods-enabled/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf modules { Module: Creating Auth-Type = digest Module: Creating Post-Auth-Type = REJECT Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/mods-enabled/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/freeradius/mods-enabled/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/freeradius/huntgroups reading pairlist file /etc/freeradius/hints Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/mods-enabled/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } reading pairlist file /etc/freeradius/users reading pairlist file /etc/freeradius/acct_users reading pairlist file /etc/freeradius/preproxy_users Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/freeradius/mods-enabled/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, NAS-Identifier, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail detail { detailfile = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/freeradius/attrs.accounting_response Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/freeradius/attrs.access_reject } # modules } # server server dhcp { # from file /etc/freeradius/sites-enabled/dhcp modules { Module: Checking dhcp DHCP-Discover {...} for more modules to load Module: Loading virtual module dhcp_sqlippool.post-auth Module: Linked to module rlm_sqlippool Module: Instantiating module "dhcp_sqlippool" from file /etc/freeradius/mods-enabled/dhcp_sqlippool sqlippool dhcp_sqlippool { sql-instance-name = "sql" lease-duration = 7200 pool-name = "" allocate-begin = "START TRANSACTION" allocate-clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= NOW() - INTERVAL 1 SECOND " allocate-find = "SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND ( (callingstationid = '%{Calling-Station-Id}') OR (expiry_time < NOW() OR expiry_time IS NULL) ) ORDER BY (callingstationid = '%{Calling-Station-Id}') DESC, expiry_time DESC LIMIT 1 FOR UPDATE" allocate-update = "UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{Calling-Station-Id}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', calledstationid = 'Freeradius-DHCP', expiry_time = GREATEST( IF(ISNULL(expiry_time),'0000-00-00 00:00:00',expiry_time), NOW() + INTERVAL 7200 SECOND) WHERE framedipaddress = '%I' AND ( (callingstationid = '%{Calling-Station-Id}') OR (expiry_time < NOW() OR expiry_time IS NULL) ) " allocate-commit = "COMMIT" allocate-rollback = "ROLLBACK" pool-check = "SELECT id FROM radippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1" start-begin = "START TRANSACTION" start-update = "SELECT NOW()" start-commit = "COMMIT" start-rollback = "ROLLBACK" alive-begin = "START TRANSACTION" alive-update = "SELECT NOW()" alive-commit = "COMMIT" alive-rollback = "ROLLBACK" stop-begin = "START TRANSACTION" stop-clear = "SELECT NOW()" stop-commit = "COMMIT" stop-rollback = "ROLLBACK" on-begin = "START TRANSACTION" on-clear = "SELECT NOW()" on-commit = "COMMIT" on-rollback = "ROLLBACK" off-begin = "START TRANSACTION" off-clear = "SELECT NOW()" off-commit = "COMMIT" off-rollback = "ROLLBACK" sqlippool_log_exists = "DHCP: Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" sqlippool_log_success = "DHCP: Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" sqlippool_log_clear = "DHCP: Released IP %{Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})" sqlippool_log_failed = "DHCP: IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" sqlippool_log_nopool = "DHCP: No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" defaultpool = "main_pool" } Module: Linked to module rlm_sql Module: Instantiating module "sql" from file /etc/freeradius/sql.conf sql { driver = "rlm_sql_mysql" server = "xxx" port = "3306" login = "xxx" password = "xxxx" radius_db = "xxx" read_groups = yes sqltrace = no sqltracefile = "/var/log/freeradius/sqltrace.sql" readclients = no deletestalesessions = yes num_sql_socks = 5 lifetime = 0 max_queries = 0 sql_user_name = "" default_user_profile = "" nas_query = "SELECT id,nasname,shortname,type,secret FROM nas" authorize_check_query = "" authorize_group_check_query = "" authorize_group_reply_query = "" accounting_onoff_query = "" accounting_update_query = "" accounting_update_query_alt = "" accounting_start_query = "" accounting_start_query_alt = "" accounting_stop_query = "" accounting_stop_query_alt = "" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "" postauth_query = "" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to voip@mysql.unisi.it:3306/opensips rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 Module: Linked to module rlm_always Module: Instantiating module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } Module: Checking dhcp DHCP-Request {...} for more modules to load Module: Loading virtual module dhcp_sqlippool.post-auth Module: Checking dhcp (null) {...} for more modules to load /etc/freeradius/sites-enabled/dhcp[67]: No name specified for Post-Auth-Type block } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "dhcp" ipaddr = 255.255.255.255 port = 67 } Listening on dhcp interface eth1 address 255.255.255.255 port 67 as server dhcp Ready to process requests. and here is the DHCP request: Received DHCP-Discover of id 022e173c from 0.0.0.0:68 to 255.255.255.255:67 DHCP-Opcode = Client-Message DHCP-Hardware-Type = Ethernet DHCP-Hardware-Address-Length = 6 DHCP-Hop-Count = 0 DHCP-Transaction-Id = 36575036 DHCP-Number-of-Seconds = 0 DHCP-Flags = 0 DHCP-Client-IP-Address = 0.0.0.0 DHCP-Your-IP-Address = 0.0.0.0 DHCP-Server-IP-Address = 0.0.0.0 DHCP-Gateway-IP-Address = 0.0.0.0 DHCP-Client-Hardware-Address = 00:04:13:71:11:65 DHCP-Message-Type = DHCP-Discover DHCP-Parameter-Request-List = DHCP-Subnet-Mask DHCP-Parameter-Request-List = DHCP-Router-Address DHCP-Parameter-Request-List = DHCP-Time-Server DHCP-Parameter-Request-List = DHCP-Domain-Name-Server DHCP-Parameter-Request-List = DHCP-Hostname DHCP-Parameter-Request-List = DHCP-Domain-Name DHCP-Parameter-Request-List = DHCP-NTP-Servers DHCP-Parameter-Request-List = DHCP-Vendor DHCP-Parameter-Request-List = DHCP-IP-Address-Lease-Time DHCP-Parameter-Request-List = DHCP-TFTP-Server-Name DHCP-Parameter-Request-List = DHCP-Boot-File-Name DHCP-Parameter-Request-List = DHCP-SIP-Servers-DHCP-Option DHCP-Parameter-Request-List = DHCP-V-I-Vendor-Specific DHCP-Parameter-Request-List = DHCP-IEEE-802.1P-VLAN-ID DHCP-Parameter-Request-List = DHCP-IEEE-802.1Q-L2-Priority DHCP-Vendor-Class-Identifier = "snom760" DHCP-Hostname = "snom760-711165" DHCP-V-I-Vendor-Specific = 0x00000de919010630303034313302063731313136350307736e6f6d373630 server dhcp { Trying sub-section dhcp DHCP-Discover {...} +- entering group DHCP-Discover {...} ++[reply] returns noop ++[reply] returns noop ++- entering policy dhcp_sqlippool.post-auth {...} +++[control] returns noop expand: DHCP-%{DHCP-Client-Hardware-Address} -> DHCP-00:04:13:71:11:65 expand: %{DHCP-Client-Hardware-Address} -> 00:04:13:71:11:65 expand: %{DHCP-Gateway-IP-Address} -> 0.0.0.0 expand: %{%{DHCP-Gateway-IP-Address}:-127.0.0.1} -> 0.0.0.0 +++[request] returns noop rlm_sql (sql): Reserving sql socket id: 4 [dhcp_sqlippool] expand: START TRANSACTION -> START TRANSACTION [dhcp_sqlippool] expand: UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= NOW() - INTERVAL 1 SECOND -> UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= NOW() - INTERVAL 1 SECOND [dhcp_sqlippool] expand: SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND ( (callingstationid = '%{Calling-Station-Id}') OR (expiry_time < NOW() OR expiry_time IS NULL) ) ORDER BY (callingstationid = '%{Calling-Station-Id}') DESC, expiry_time DESC LIMIT 1 FOR UPDATE -> SELECT framedipaddress FROM radippool WHERE pool_name = 'main_pool' AND ( (callingstationid = '00:04:13:71:11:65') OR (expiry_time < NOW() OR expiry_time IS NULL) ) ORDER BY (callingstationid = '00:04:13:71:11:65') DESC, expiry_time DESC LIMIT 1 FOR UPDATE [dhcp_sqlippool] expand: UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{Calling-Station-Id}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', calledstationid = 'Freeradius-DHCP', expiry_time = GREATEST( IF(ISNULL(expiry_time),'0000-00-00 00:00:00',expiry_time), NOW() + INTERVAL 7200 SECOND) WHERE framedipaddress = '172.20.1.20' AND ( (callingstationid = '%{Calling-Station-Id}') OR (expiry_time < NOW() OR expiry_time IS NULL) ) -> UPDATE radippool SET nasipaddress = '0.0.0.0', pool_key = '00:04:13:71:11:65', callingstationid = '00:04:13:71:11:65', username = 'DHCP-00:04:13:71:11:65', calledstationid = 'Freeradius-DHCP', expiry_time = GREATEST( IF(ISNULL(expiry_time),'0000-00-00 00:00:00',expiry_time), NOW() + INTERVAL 7200 SECOND) WHERE framedipaddress = '172.20.1.20' AND ( (callingstationid = '00:04:13:71:11:65') OR (expiry_time < NOW() OR expiry_time IS NULL) ) [dhcp_sqlippool] Allocated IP 172.20.1.20 [140114ac] [dhcp_sqlippool] expand: COMMIT -> COMMIT rlm_sql (sql): Released sql socket id: 4 [dhcp_sqlippool] expand: DHCP: Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name}) -> DHCP: Allocated IP: 172.20.1.20 from main_pool (did cli 00:04:13:71:11:65 port user DHCP-00:04:13:71:11:65) DHCP: Allocated IP: 172.20.1.20 from main_pool (did cli 00:04:13:71:11:65 port user DHCP-00:04:13:71:11:65) +++[dhcp_sqlippool] returns ok +++? if (ok) ? Evaluating (ok) -> TRUE +++? if (ok) -> TRUE +++- entering if (ok) {...} expand: %{reply:Framed-IP-Address} -> 172.20.1.20 ++++[reply] returns ok +++- if (ok) returns ok ++- policy dhcp_sqlippool.post-auth returns ok ++[ok] returns ok } # server dhcp DHCP-Subnet-Mask = 255.255.0.0 DHCP-Router-Address = 172.20.1.1 DHCP-Time-Server = 172.20.1.2 DHCP-Domain-Name-Server = 172.20.1.2 DHCP-Hostname = "voip.unisi.it" DHCP-Domain-Name = "voip.unisi.it" DHCP-NTP-Servers = 172.20.1.2 DHCP-IP-Address-Lease-Time = 7200 DHCP-DHCP-Server-Identifier = 172.20.1.2 DHCP-TFTP-Server-Name = "tftp://172.20.1.2" Sending DHCP-Offer of id 022e173c from 255.255.255.255:67 to 172.20.1.20:68 Finished request 0. Cleaning up request 0 ID 36575036 with timestamp +2 Going to the next request Ready to process requests. but TCPDUMP (and the phone, that didn't receive the reply) say: 10:40:34.484198 IP (tos 0x0, ttl 128, id 0, offset 0, flags [none], proto UDP (17), length 346) 0.0.0.0.bootpc > 255.255.255.255.bootps: [no cksum] BOOTP/DHCP, Request from 00:04:13:71:11:65 (oui Unknown), length 318, xid 0x22e173c, Flags [none] (0x0000) Client-Ethernet-Address 00:04:13:71:11:65 (oui Unknown) Vendor-rfc1048 Extensions Magic Cookie 0x63825363 DHCP-Message Option 53, length 1: Discover Parameter-Request Option 55, length 15: Subnet-Mask, Default-Gateway, Time-Server, Domain-Name-Server Hostname, Domain-Name, NTP, Vendor-Option Lease-Time, TFTP, BF, Option 120 Option 125, Option 132, Option 133 Vendor-Class Option 60, length 7: "snom760" Hostname Option 12, length 14: "snom760-711165" T125 Option 125, length 30: 0,3561,6401,1584,12336,13361,13058,1591,12593,12598,13571,1907,28271,27959,13872 END Option 255, length 0 .... any hint ? Thanks, Michele -- Michele Pinassi Responsabile Telefonia di Ateneo Servizio Reti, Sistemi e Sicurezza Informatica - Università degli Studi di Siena tel: 0577.(23)2169 - fax: 0577.(23)2053 Per trovare una soluzione rapida ai tuoi problemi tecnici consulta le FAQ di Ateneo, http://www.faq.unisi.it

3 5

Load Balancing Issue
by Muhammad Nadeem 12 Feb '13

12 Feb '13

Hi, I am using Freeradius 2.2.0 on redhat 5. My goal was to increase the speed of user authentication. To achieve this I configured Load Balancing (with realms). I have a proxy Freeradius server, that is just proxying requests to 2 other freeradius servers. Problem is that, when i sent a specific number (10 million) requests to proxy server (that just proxy requests to 2 other servers) , it took about 45 minutes to complete these requests. But if I send same amount of requests direct to on of the server (without sending it to proxy server), requests are entertained rapidly (in around 16 minutes). Can any one please tell me , what's the issue. Thanks a lot.

4 4

Mysql - radusergroup
by Neven 12 Feb '13

12 Feb '13

Hi, i'm using Freeradius 2, fedora16, mysql 5. 500 000 different users in table. i have a user in table radcheck (username and pass), i add that user in radusergroup, then I add usergroup in radgroupcheck and add attributes for that group. That works well as far as i know. Question: Can I add a user in one group without adding that user in radusergroup table? Is there some attribute that i can add in radcheck that will add a user in one user group? id Username Attribute OP Value 1 User1 Cleartext-password := 123456 2 User1 "Attribute for user group" == "Group that i can add attributes in radgroupcheck table" Could this be done? Thank u. Neven

1 0

Load Balancing Issue
by Muhammad Nadeem 12 Feb '13

12 Feb '13

Hi, I am using Freeradius 2.2.0 on redhat 5. My goal was to increase the speed of user authentication. To achieve this I configured Load Balancing (with realms). I have a proxy Freeradius server, that is just proxying requests to 2 other freeradius servers. Problem is that, when i sent a specific number (10 million) requests to proxy server (that just proxy requests to 2 other servers) , it took about 45 minutes to complete these requests. But if I send same amount of requests direct to on of the server (without sending it to proxy server), requests are entertained rapidly (in around 16 minutes). Can any one please tell me , what's the issue. Thanks a lot.

1 0