June 2008 - Freeradius-Users - lists.freeradius.org

LDAP and checking for Mac address.
by Neil Marjoram 17 Jun '08

17 Jun '08

I have just installed 2.05 and have successfully linked to my ldap server. I would like to build in MAC address checking on top of the user name / password auth. I read some docs and concluded that I could change access_attr = to use radiusCallingStationId. I set the value of this in LDAP to that which I could see in the debug output; Calling-Station-Id = "0019E3021FD8". The user happily logged in, however when I changed the value he could still log in! Now I am guessing that this attribute is only checked for presence within the user profile rather than checking if they match. Is there a way of getting Radius to check that the Calling-Station-Id matches radiusCallingStationId before access is allowed? I have read the ldap docs and not been able to find what I am looking for. Many thanks, Neil. -- Neil Marjoram Systems Manager Adastral Park Campus University College London Ross Building Adastral Park Martlesham Heath Ipswich - Suffolk IP5 3RE Tel: 01473 663711 Fax: 01473 635199 Reclaim Your Inbox! http://www.mozilla.org/products/thunderbird

2 1

rad_check_password cleartext?
by Neil Marjoram 17 Jun '08

17 Jun '08

I have read some posts on this, and I'm sorry I don't really understand. 1. Am I transmitting clear text over the network? 2. If I need to worry, then can someone tell me which bit of the config I have to change as I grepped just about everything I could find, but found nothing! This is the error ? in the debug output. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Replacing User-Password in config items with Cleartext-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Please update your configuration so that the "known good" !!! !!! clear text password is in Cleartext-Password, and not in User-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Many thanks, Neil. -- Neil Marjoram Systems Manager Adastral Park Campus University College London Ross Building Adastral Park Martlesham Heath Ipswich - Suffolk IP5 3RE Tel: 01473 663711 Fax: 01473 635199 Reclaim Your Inbox! http://www.mozilla.org/products/thunderbird

2 1

LDAP authorization - Attribute "User-Password" is required for authentication
by Neil Marjoram 17 Jun '08

17 Jun '08

I have now read many How-To's but don't seem to be able to find an answer, and I hope someone on the list can help. I am using a Netgear WAG102 Wireless access point to autorise to Radius, which in turn uses LDAP. radtest from the command line of the local host authenticates no problem, but I understand that it is a possibility that the Netgear passes the Mac address of the laptop through to use as a password. I am unable to understand how to map this in LDAP and keep getting : Attribute "User-Password" is required for authentication I am using the radiusProfile for each user in LDAP that I allow access via wireless. I am pretty new to Radius so am I sure I have some config wrong here somewhere. I am currently testing on Ubuntu 8.04, and have Freeradius 1.1.7. Thanks, Neil. rad_recv: Access-Request packet from host 192.168.0.232:1263, id=13, length=181 Message-Authenticator = 0x518adcf7d4427415acb16df56084b363 Service-Type = Framed-User User-Name = "test" Framed-MTU = 1488 Called-Station-Id = "001E2A10E483:UCL AP TEST BG" Calling-Station-Id = "0019E3021FD8" NAS-Identifier = "UCLAP" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0201000d016e65696c6d61726a NAS-IP-Address = 192.168.0.232 NAS-Port = 1 NAS-Port-Id = "STA port # 1" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 rlm_eap: EAP packet type response id 1 length 13 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 rlm_ldap: - authorize rlm_ldap: performing user authorization for test radius_xlat: '(uid=test)' radius_xlat: 'dc=adastral rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=adastral filter (uid=test) rlm_ldap: checking if remote access for test is allowed by radiusFilterId rlm_ldap: Added password $1$GL8tD.Lb$fkslenzW4.q4Nzy2rQ726. in check items rlm_ldap: No default NMAS login sequence rlm_ldap: looking for check items in directory... rlm_ldap: Adding sambaNTPassword as NT-Password == 0x46343741374534567832456324435433936324537453141313236323538433441 rlm_ldap: Adding sambaLMPassword as LM-Password == 0x34443841324541424567883503945423134413342313038463346413643423644 rlm_ldap: Adding radiusCallingStationId as Calling-Station-Id == "0019e3021fd8" rlm_ldap: Adding radiusAuthType as Auth-Type == LDAP rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusFilterId as Filter-Id = "0019E3021FD8" rlm_ldap: user test authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type ldap auth: type "LDAP" Processing the authenticate section of radiusd.conf modcall: entering group LDAP for request 1 rlm_ldap: - authenticate rlm_ldap: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "ldap" returns invalid for request 1 modcall: leaving group LDAP (returns invalid) for request 1 auth: Failed to validate the user. Login incorrect: [test] (from client UCL port 1 cli 0019E3021FD8) Delaying request 1 for 1 seconds Finished request 1 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 192.168.0.232:1263, id=13, length=181 Sending Access-Reject of id 13 to 192.168.0.232 port 1263 Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/freeradius/proxy.conf Config: including file: /etc/freeradius/clients.conf Config: including file: /etc/freeradius/snmp.conf Config: including file: /etc/freeradius/eap.conf Config: including file: /etc/freeradius/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/freeradius" main: libdir = "/usr/lib/freeradius" main: radacctdir = "/var/log/freeradius/radacct" main: hostname_lookups = no main: snmp = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/freeradius/radius.log" main: log_auth = yes main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/freeradius/freeradius.pid" main: user = "freerad" main: group = "freerad" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib/freeradius Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded LDAP ldap: server = "ldap4" ldap: port = 389 ldap: net_timeout = 1 ldap: timeout = 4 ldap: timelimit = 3 ldap: identity = "cn=nssldap,dc=adastral" ldap: tls_mode = no ldap: start_tls = no ldap: tls_cacertfile = "(null)" ldap: tls_cacertdir = "(null)" ldap: tls_certfile = "(null)" ldap: tls_keyfile = "(null)" ldap: tls_randfile = "(null)" ldap: tls_require_cert = "allow" ldap: password = "HAHANotHERE" ldap: basedn = "dc=adastral" ldap: filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" ldap: base_filter = "(objectclass=radiusprofile)" ldap: default_profile = "(null)" ldap: profile_attribute = "(null)" ldap: password_header = "{crypt}" ldap: password_attribute = "userPassword" ldap: access_attr = "radiusFilterId" ldap: groupname_attribute = "cn" ldap: groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" ldap: groupmembership_attribute = "(null)" ldap: dictionary_mapping = "/etc/freeradius/ldap.attrmap" ldap: ldap_debug = 0 ldap: ldap_connections_number = 5 ldap: compare_check_items = no ldap: access_attr_used_for_allow = yes ldap: do_xlat = yes ldap: edir_account_policy_check = no ldap: set_auth_type = yes rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/freeradius/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP sambaLMPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNTPassword mapped to RADIUS NT-Password rlm_ldap: LDAP Calling-Station-Id mapped to RADIUS User-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message conns: 0xb8082608 Module: Instantiated ldap (ldap) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/etc/freeradius/huntgroups" preprocess: hints = "/etc/freeradius/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/etc/freeradius/users" files: acctusersfile = "/etc/freeradius/acct_users" files: preproxy_usersfile = "/etc/freeradius/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded detail detail: detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/var/log/freeradius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. -- Neil Marjoram Systems Manager Adastral Park Campus University College London Ross Building Adastral Park Martlesham Heath Ipswich - Suffolk IP5 3RE Tel: 01473 663711 Fax: 01473 635199 Reclaim Your Inbox! http://www.mozilla.org/products/thunderbird

2 2

Problem in connecting to switch on telnet
by Guk Viktor 17 Jun '08

17 Jun '08

3 2

Chap Authentication failure
by Sudarshan Soma 17 Jun '08

17 Jun '08

Hi, Iam trying to understand CHALLENGE RESPONSE behaviour. I have tried to use CHAP protocol and issued the following. echo 'User-Name="userX"'; echo 'CHAP-Password="stealme"' | /usr/local/bin/radclient -x 192.168.11.94:1812 auth testing12 It gives me the following error: User-Name="userX" Sending Access-Request of id 184 to 192.168.11.94 port 1812 CHAP-Password = 0xb83e2e295a4a0d3edddbfbb3a37058ff7a rad_recv: Access-Reject packet from host 192.168.11.94:1812, id=184, length=20 The radius server gives the following messages, please help me rad_recv: Access-Request packet from host 192.168.11.94:33116, id=184, length=39 CHAP-Password = 0xb83e2e295a4a0d3edddbfbb3a37058ff7a Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 rlm_chap: Setting 'Auth-Type := CHAP' modcall[authorize]: module "chap" returns ok for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: Proxy reply, or no User-Name. Ignoring. modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched entry DEFAULT at line 153 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns ok) for request 0 rad_check_password: Found Auth-Type CHAP auth: type "CHAP" Processing the authenticate section of radiusd.conf modcall: entering group CHAP for request 0 rlm_chap: Attribute "User-Name" is required for authentication. modcall[authenticate]: module "chap" returns invalid for request 0 modcall: leaving group CHAP (returns invalid) for request 0 auth: Failed to validate the user. Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 184 to 192.168.11.94 port 33116 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 184 with timestamp 4857b5ab Nothing to do. Sleeping until we see a request. Regards, pavan

2 2

Radius missed user logout
by Sascha Kiefer 17 Jun '08

17 Jun '08

Hi, I'm running mysql + radius. Now it happened, that a user is no longer connected, but radius still things he is connected. My NAS vpn server died; probably thats why. What do i have to do make this straight?

3 4

inner/outer authentication problem in 2.0.2
by Gopinath Reddy N 17 Jun '08

17 Jun '08

Hello all, Iam using freeradius 2.0.2 version with TTLS/MSCHAPv2 I have two users in configuration tmpuser -> tmpgroup emp1 -> employee Iam using "tmpuser" in outer authentication and "emp1" in inner authentication. I have eap.conf file configured with ttls { copy_request_to_tunnel = yes use_tunneled_reply = yes } But when I login successfully freeradius is always applying policy from "tmpgroup" which belongs to the user used in outer authentication. But it is supposed to apply policy from employee group as I have used "employee" in inner authentication. Could anybody let me know if this is a bug with freeradius or my configuration is wrong. Thanks in advance Regards gnreddy

3 4

Re: Problem in connecting to switch on telnet
by Guk Viktor 17 Jun '08

17 Jun '08

It tried without Auth-Type = System, also tried Auth-Type = Local. Processing the authenticate section of radius.conf modcall: entering group authenticate for request 0 rlm_unix: [admin]: invalid password modcall[authenticate]: module "unix" returns reject for request 0 modcall: leaving group authenticate (returns reject) for request 0 auth: Failed to validate the user. Login incorrect: [admin/admin] (from client 10.0.1.2 port 117612545 cli 0000-0000-0000) > Message: 4 Date: Fri, 13 Jun 2008 15:38:57 +0100 From: "Ivan Kalik" > <tnt(a)kalik.net> Subject: Re: Problem in connecting to switch on telnet > To: "FreeRadius users mailing list" > <freeradius-users(a)lists.freeradius.org> Message-ID: > <wbdeeigX.1213367937.5098900.tnt(a)kalik.co.yu> Content-Type: > text/plain; charset=ISO-8859-2 You are setting up the wrong > authentication type. Remove Auth-Type =System from user configuration. > 1.1.3 is old. I am not sure do you need to set Auth-Type there. If it > doesn't work without it set Auth-Type = Local. Ivan Kalik Kalik > Informatika ISP Dana 13/6/2008, "Guk Viktor" <v.guk(a)zaz.zp.ua> pi?e: >> > >> > >> > >> > >> > >> > >> >Hello, >> > >> >I have freeradius-1.1.3 and 3com switch 5500-EI. On the >> >switch is disposed the access of users into the network through >> >freeradius. Arose problem in >> >connecting to switch on telnet. In the log freeradius it is indicated >> >that the incorrect password (however password I introduce correctly). >> > >> >rad_recv: Access-Request packet from host 10.0.1.2:5007, id=1, >> >length=203 >> >??????? User-Name = "admin" >> >??????? User-Password = "admin" >> >??????? NAS-IP-Address = 10.0.1.2 >> >??????? NAS-Identifier = "001ac1d4ee42" >> >??????? NAS-Port = 117612545 >> >??????? NAS-Port-Id = "unit=7;subslot=0;port=42;vlanid=1" >> >??????? NAS-Port-Type = Ethernet >> >??????? Service-Type = Login-User >> >??????? Login-IP-Host = 10.0.1.2 >> >??????? Calling-Station-Id = "0000-0000-0000" >> >??????? Framed-IP-Address = 10.0.1.100 >> >??????? Vendor-25506-Attr-26 = 0x00000003 >> >??????? Vendor-25506-Attr-255 = 0x353530302d4549 >> >??????? Vendor-25506-Attr-60 = >> >0x31302e302e312e3130302030303a30303a30303a30303a30303a3030 >> >??????? Vendor-25506-Attr-59 = 0x38e68c68 >> >? Processing the authorize section of radiusd.conf >> >modcall: entering group authorize for request 0 >> >? modcall[authorize]: module "mschap" returns noop for request 0 >> >??? rlm_realm: No '\' in User-Name = "admin", looking up realm NULL >> >??? rlm_realm: No such realm "NULL" >> >? modcall[authorize]: module "ntdomain" returns noop for request 0 >> >? rlm_eap: No EAP-Message, not doing EAP >> >? modcall[authorize]: module "eap" returns noop for request 0 >> >??? users: Matched entry DEFAULT at line 152 >> >??? users: Matched entry admin at line 216 >> >? modcall[authorize]: module "files" returns ok for request 0 >> >modcall: leaving group authorize (returns ok) for request 0 >> >? rad_check_password:? Found Auth-Type System >> >auth: type "System" >> >? Processing the authenticate section of >> >radiusd.conf >> >modcall: entering group authenticate for request 0 >> >? modcall[authenticate]: module "unix" returns notfound for request 0 >> >modcall: leaving group authenticate (returns notfound) for request 0 >> >auth: Failed to validate the user. >> >Login incorrect: [admin/admin] (from >> >client 10.0.1.2 port 117612545 cli 0000-0000-0000) >> >Delaying request 0 for 1 seconds >> >Finished request 0 >> > >> >Users: >> >admin?? Auth-Type = System, User-Password == "admin" >> >??? ?? 3Com-User-Access-Level = Administrator >> > >> >eap.conf: >> >eap{ >> >??? default_eap_type = peap >> >??? timer_expire = 60 >> >??? ignore_unknown_eap_type = no >> >??? cisco_accounting_username_bug = no >> >??? >> >??? md5{ >> >??? ?? } >> > >> >??? leap{ >> >??? ?? } >> > >> >??? gtc{ >> >??? ?? auth_type = PAP >> >??? ?? } >> > >> >??? peap{ >> >??? ?? default_eap_type = mschapv2 >> >??? ?? use_tunneled_reply = yes >> >??? ?? } >> > >> >??? mschapv2{ >> >??? ?? } >> >??? } >> > >> >It can possibly use a local authorization to switch on telnet, >> >without freeradius. >> > >> >Viktor Guk >> >

2 1

2.0.5 Compile error on SLES10SP1, check-radiusd-config file missing
by Graham Marsh 17 Jun '08

17 Jun '08

Hi all, I'm attempting to compile 2.0.5 on SLES10SP1 and getting the following error. I noticed another similar posting but not sure if there was any fix. Appreciate any advice, thanks, Graham: Processing files: freeradius-server-utils-2.0.5-0 Finding Provides: /usr/lib/rpm/find-provides freeradius-server Finding Requires: /usr/lib/rpm/find-requires freeradius-server Finding Supplements: /usr/lib/rpm/find-supplements freeradius-server Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 Requires: freeradius-server-libs = 2.0.5 /bin/sh /usr/bin/perl libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libcrypto.so.0.9.8 libfreeradius-eap-2.0.5.so libfreeradius-radius-2.0.5.so libgdbm.so.3 libgdbm_compat.so.3 libnsl.so.1 libpcap.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.0) libresolv.so.2 libssl.so.0.9.8 Processing files: freeradius-server-dialupadmin-2.0.5-0 Processing files: freeradius-server-devel-2.0.5-0 Processing files: freeradius-server-debuginfo-2.0.5-0 RPM build errors: File not found: /var/tmp/freeradius-server-2.0.5-build/usr/sbin/check-radiusd-config

2 3

freeradius security
by Zahra Bahar 17 Jun '08

17 Jun '08

Hi, I have freeradius using ldap DS for aaa. my radius supports vpn users and uses PAP. what is the best way for secure user_passwords in connections?

2 3