February 2010 - Freeradius-Users - lists.freeradius.org

FR 2.1.0 (ubuntu) proxying to NPS/IAS.
by Ville Leinonen 02 Feb '11

02 Feb '11

Hi, I try to use FR to forwarding access-request to NPS servers, but some reason FR/NPS gives "User password is incorrect" message. I have tripple check that password is correct. When i test IAS to NPS proxy it works. I have enable in NPS side MS-CHAP-v2, MS-CHAP, CHAP and PAP/SPAP methods. Any clue what is wrong? Here is some logs: rad_recv: Access-Request packet from host 192.168.21.150 port 1025, id=57, length=154 User-Name = "vle" User-Password = "\2063\261m\301\344J\216sCÑ \035\003\2328" NAS-Port = 626688 Called-Station-Id = "192.168.21.150" Calling-Station-Id = "192.168.1.114" NAS-Port-Type = Virtual Tunnel-Client-Endpoint:0 = "192.168.1.114" NAS-IP-Address = 192.168.21.150 Cisco-AVPair = "ip:source-ip=192.168.1.114" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "vle", looking up realm NULL [suffix] Found realm "NULL" [suffix] Adding Stripped-User-Name = "vle" [suffix] Adding Realm = "NULL" [suffix] Proxying request from user vle to realm NULL [suffix] Preparing to proxy authentication request to realm "NULL" ++[suffix] returns updated [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop +- entering group pre-proxy {...} ++[files] returns noop Sending Access-Request of id 118 to 192.168.21.200 port 1812 User-Name = "vle" User-Password = "\2063\261m\301\344J\216sCÑ \035\003\2328" NAS-Port = 626688 Called-Station-Id = "192.168.21.150" Calling-Station-Id = "192.168.1.114" NAS-Port-Type = Virtual Tunnel-Client-Endpoint:0 = "192.168.1.114" NAS-IP-Address = 192.168.21.150 Cisco-AVPair = "ip:source-ip=192.168.1.114" Proxy-State = 0x3537 Proxying request 0 to home server 192.168.21.200 port 1812 Sending Access-Request of id 118 to 192.168.21.200 port 1812 User-Name = "vle" User-Password = "\2063\261m\301\344J\216sCÑ \035\003\2328" NAS-Port = 626688 Called-Station-Id = "192.168.21.150" Calling-Station-Id = "192.168.1.114" NAS-Port-Type = Virtual Tunnel-Client-Endpoint:0 = "192.168.1.114" NAS-IP-Address = 192.168.21.150 Cisco-AVPair = "ip:source-ip=192.168.1.114" Proxy-State = 0x3537 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Reject packet from host 192.168.21.200 port 1812, id=118, length=52 Proxy-State = 0x3537 Reply-Message = "User password is incorrect" Br, Ville

6 11

Certificate-based client side authentication towards a website with freeradius
by Martin Schneider 01 Dec '10

01 Dec '10

Hello all, we're trying to setup a freeradius / apache installation that allows us to authenticate and authorize users with *certificates* towards a website. Is there a good tutorial out there somewhere? We did only finde partial information that seems to be quite old unfortunately. Or could somebody who is deep into this matter please give some advice or ideas how we can solve our task? Best regards M

5 10

Adding Multiple Cisco-AVPairs using rlm_perl
by James Nedila 29 Aug '10

29 Aug '10

I have a rlm_perl script where i'd like to return multiple Cisco-AVPair attributes in an Access-Accept response. Since rlm_perl is passed hashes for RAD_REQUEST, RAD_CHECK, and RAD_REPLY, is there a way to pass an array as the value for the Cisco-AVPair hash key? If not, is there another way to do this? Thanks, James

5 8

FR 2.1.8 Issue - Unjustified(?) Access-Rejects.
by Palmer J.D.F. 29 Jun '10

29 Jun '10

Hi, We migrated to 2.1.8 (from 2.1.7) last week while things were quiet, as the users have re-appeared after the holiday we've started to receive a few reports from users stating that they have been getting lots of prompts for credentials. Two users in particular, both Ubuntu users, have been having big problems. I had a look at the radpostauth table and sure enough at least 50% of their auth attempts have resulted in access-rejects. I rolled back to 2.1.7 this afternoon and the problem has gone away. Should anyone be interested I have attached an radmin output for one of the users, it shows some accepts and lots of rejects. Is this likely to be a configuration error (no changes were made to the 2.1.7 config), or a bug? Thanks, Jezz Palmer.

7 16

Password in Radius Debug
by Cody Jarrett 17 Mar '10

17 Mar '10

I notice the password during supplicant connects to the radius server are displayed in plain text. Is there a way to disable this? -- Cody Jarrett IT Freedom cody.jarrett(a)itfreedom.com Office: 512.419.0070 Fax: 512.419.0080

5 5

option 82
by Kevin Croes 11 Mar '10

11 Mar '10

Hi, I work at an ISP and we are looking at the possibility to use option 82 in FreeRADIUS. The other side is going to send us an ordernumber and then we want to send a configuration back (an ip address etc.). Been searching how to do this in FreeRADIUS, but haven't found much useful information. So, if somebody can point me in the right direction on how to set it up in FreeRADIUS. Any help will be greatly appreciated. Gr, Kevin

5 5

Wiki
by Doug Hardie 03 Mar '10

03 Mar '10

A week ago I tried to update the wiki to correct an interpretation error that was pointed out by one of the freeradius users. I can log into the wiki fine, but even though the save says the update was saved, it is not. I then posted the necessary change here and nothing has happened. Has the wiki become road kill?

4 5

Re: Re: rlm_perl behavior
by Borislav Dimitrov 03 Mar '10

03 Mar '10

Hello, I just subscribed so I won't be able to quote properly but I hope at least the message is associated with the right thread (I found it on the web archive of the mailing list). I've been using FreeRADIUS for about 4 year now and it is a wonderful product - there's no question why you're No 1! For the past years of using and developing rlm_perl modules for FreeRADIUS, I've only been astonished and happy because of the new functionalities etc that the development team have been adding to the new releases. This all ended with this crippling

6 20

duplicate sessions
by Nadir Aliyev 01 Mar '10

01 Mar '10

Hello All! I have great problems with duplicate sessions! ~2500 online users, accounting per minute, 25 db socket limit for radius daemon. Nas port id, accstoptime, session id, inputoctets, outputoctets is same in duplicate sessions. But most duplicate sessions only have difference with acctstarttime (1 second difference) Any ideas? Thanks!

3 2

Wiki editing
by sphaero 28 Feb '10

28 Feb '10

Am I overlooking something? How do you edit the wiki. I can't find a way to register an account to edit wiki pages. I was about to add some comments about the rlm_sql_iodb driver since everybody need to know the driver looks for the DSN in radius_db config option and not in the server configuration option. (at least for 1.1.8) Rg, Arnaud -- View this message in context: http://old.nabble.com/Wiki-editing-tp27700281p27700281.html Sent from the FreeRadius - User mailing list archive at Nabble.com.

4 4