June 2011 - Freeradius-Users - lists.freeradius.org

FreeRadius Support for WiMAX Sub-TLVs of Sub-TLVs
by Martin 03 Jun '11

03 Jun '11

Hi, Vendor-Specific -> WiMAX TLV -> WiMAX sub-tlv -> WiMAX sub-sub-tlv Does anybody knows if is going to be supported this kind of encapsulation and if yes, in what release? Regards, Martin Ion

4 7

Re: Error: User-Name is not the same as MS-CHAP name
by Francois Gaudreault 03 Jun '11

03 Jun '11

Hi, I had a look at this issue with him since he is one of our client. Machine authentications are working flawlessly, windows 7 authentication as well (no hostname is sent with the username). The problem is when the HOSTNAME is sent along with the username under windows XP. I tried to set a realm specially for this HOSTNAME, but we got the same error. > Well... re-writing the names in the "inner-tunnel" server is breaking > authentication. We don't. The sites configuration are very straightforward (almost default), no fency rewrites in the default or the inner-tunnel. > *Why* are you re-writing them? What do you expect to do with the > names? Why isn't there another way to achieve the same goal? We do not rewrite anything. LDAP authorization passes properly, but when EAP authentication kicks in, we have this MS-CHAP error. We are using mschap:user-name in the LDAP filter and in the ntlm_auth line. Again, we are *NOT* rewriting the User-Name. We need other ideas here. -- Francois Gaudreault, ing. jr Inverse inc. :: Leaders behind SOGo (www.sogo.nu) and PacketFence (www.packetfence.org)

5 15

One client, multiple NAS-Port-Types
by DaveA 02 Jun '11

02 Jun '11

Hello, I am looking for some guidance on configuring clients that will send requests with different NAS-Port-Type’s. Devices: HP Procurve, Cisco, Aruba wireless controllers Possible NAS-Port-Types: Ethernet, Virtual, Wireless, Async Ex., for an HP procurve switch, the possibilities will be: 1. CLI access (admin) – NAS-Port-Type = Virtual 2. 802.1X (users) – Nas-Port-Type = Ethernet In this case, I would like to send CLI and 802.1x requests to different virtual servers, because I accomplish #1 painlessly with ldap, and #2 gets more complicated with ads and eduroam in the mix. I have read through clients.conf and do not believe it can be done there. Where is the most appropriate place to separate the requests? Thank-you, Dave -- View this message in context: http://freeradius.1045715.n5.nabble.com/One-client-multiple-NAS-Port-Types-… Sent from the FreeRadius - User mailing list archive at Nabble.com.

5 8

freeradius-server-2.1.10 crash on mips platform when built with static libraries
by K Arvind 02 Jun '11

02 Jun '11

When I build freeradius-server-2.1.10, using static libraries ("-enable-shared=no", "-enable-static=PKG") for the MIPS platform, the build goes through fine. However, when I start the freeradius server, it crashes with the following error message: radiusd: ../sysdeps/unix/sysv/linux/ia64/getpagesize.c:35: __getpagesize: Assertion `_rtld_global_ro._dl_pagesize != 0' failed. Floating point exception I noticed the following warning in the build log: /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/lib/.libs/libfreeradius-radius.a(misc.o): In function `ip_hton': /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/lib/misc.c:419: warning: Using 'getaddrinfo' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking Has anyone else encountered this before? Any input/suggestions on this would be appreciated. The version of glibc used is glibc-2.7. Thanks, Arvind

2 1

Unable to build freeradius-server-2.1.10 with --enable-shared=yes and --enable-static=no
by K Arvind 02 Jun '11

02 Jun '11

Hi, I'm trying to build freeradius-server-2.1.10 with the configure flags "-enabled-shared" set to yes, and "-enable-static" set to no. In the make step, I get a warning "libfreeradius-radius-2.1.10.so, needed by libeap/.libs/libfreeradius-eap.so, not found (try using -rpath or -rpath-link)" that seems to lead to a series of undefined reference errors. Any input or suggestions on this would be appreciated. Thanks, Arvind Configure settings: confargs= --prefix=/gw/config --enable-shared=yes --enable-static=no --enable-dlopen=no --enable-developer --with-raddbdir=/gw/config/radius/raddb --with-openssl-includes=/gw/apache/openssl/include --with-openssl-libraries=/gw/apache/openssl/lib --host=mips-fti-linux-gnu --without-rlm_acctlog --without-rlm_attr_filter --without-rlm_attr_rewrite --without-rlm_caching --without-rlm_copy_packet --without-rlm_counter --without-rlm_cram --without-rlm_dbm --without-rlm_detail --without-rlm_digest --without-rlm_dynamic_clients --without-rlm_eap2 --without-rlm_example --without-rlm_expiration --without-rlm_fastusers --without-rlm_ippool --without-rlm_jradius --without-rlm_krb5 --without-rlm_ldap --without-rlm_linelog --without-rlm_logintime --without-rlm_opendirectory --without-rlm_otp --without-rlm_pam --without-rlm_passwd --without-rlm_perl --without-rlm_policy --without-rlm_preprocess --without-rlm_protocol_filter --without-rlm_python --without-rlm_radutmp --without-rlm_ruby --without-rlm_sim_files --without-rlm_smb --without-rlm_smsotp --without-rlm_sql --without-rlm_sql_log --without-rlm_sqlcounter --without-rlm_sqlhpwippool --without-rlm_sqlippool --without-rlm_unix --without-rlm_wimax cur directory= freeradius-server-2.1.10 The 'make' step fails with the following errors: /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/libtool --mode=link mips-fti-linux-gnu-gcc -o radeapclient radeapclient.lo libeap/libfreeradius-eap.la -lnsl -lresolv -lpthread -L/gw/apache/openssl/lib -lcrypto -lssl -lcrypto mips-fti-linux-gnu-gcc -o .libs/radeapclient .libs/radeapclient.o libeap/.libs/libfreeradius-eap.so -L/gw/apache/openssl/lib -lssl -lcrypto -lnsl -lresolv -lpthread -Wl,--rpath -Wl,/gw/config/lib /tools/gcc-4.1.2-glibc-2.7/mips/lib/gcc/mips-fti-linux-gnu/4.1.2/../../../../mips-fti-linux-gnu/bin/ld: warning: libfreeradius-radius-2.1.10.so, needed by libeap/.libs/libfreeradius-eap.so, not found (try using -rpath or -rpath-link) .libs/radeapclient.o: In function `debug_packet': /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:179: undefined reference to `fr_packet_codes' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:192: undefined reference to `vp_prints' .libs/radeapclient.o: In function `cleanresp': /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:297: undefined reference to `pairdelete' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:298: undefined reference to `pairdelete' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:311: undefined reference to `pairbasicfree' .libs/radeapclient.o: In function `process_eap_start': /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:334: undefined reference to `pairfind' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:393: undefined reference to `pairfind' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:394: undefined reference to `pairfind' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:395: undefined reference to `pairfind' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:410: undefined reference to `paircreate' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:412: undefined reference to `pairreplace'/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:415: undefined reference to `paircreate' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:420: undefined reference to `pairreplace'/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:432: undefined reference to `paircreate' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:438: undefined reference to `fr_rand' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:439: undefined reference to `fr_rand' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:440: undefined reference to `fr_rand' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:441: undefined reference to `fr_rand' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:443: undefined reference to `pairreplace'/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:455: undefined reference to `pairfind' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:461: undefined reference to `paircreate' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:469: undefined reference to `pairreplace'.libs/radeapclient.o: In function `sendrecv_eap': /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:848: undefined reference to `pairfind' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:851: undefined reference to `pairfind' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:856: undefined reference to `pairfind' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:857: undefined reference to `strlcpy' .libs/radeapclient.o: In function `map_eap_types': /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:1221: undefined reference to `pairfind' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:1228: undefined reference to `pairfind' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:1270: undefined reference to `pairdelete'.libs/radeapclient.o: In function `sendrecv_eap': /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:909: undefined reference to `fr_md5_calc'/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:913: undefined reference to `pairfind' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:914: undefined reference to `strlcpy' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:917: undefined reference to `pairfind' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:918: undefined reference to `strlcpy' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:921: undefined reference to `pairfind' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:922: undefined reference to `strlcpy' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:925: undefined reference to `rad_chap_encode' .libs/radeapclient.o: In function `send_packet': /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:209: undefined reference to `rad_send' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:223: undefined reference to `rad_recv' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:239: undefined reference to `ip_ntoh' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:240: undefined reference to `ip_ntoh' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:248: undefined reference to `fr_perror' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:265: undefined reference to `rad_verify' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:266: undefined reference to `fr_perror' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:270: undefined reference to `rad_decode' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:271: undefined reference to `fr_perror' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:276: undefined reference to `fr_debug_flag' .libs/radeapclient.o: In function `unmap_eap_types': /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:1301: undefined reference to `paircreate'/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:1303: undefined reference to `pairadd' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:1305: undefined reference to `paircreate'/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:1307: undefined reference to `pairadd' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:1344: undefined reference to `paircreate'/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:1347: undefined reference to `pairadd' .libs/radeapclient.o: In function `respond_eap_md5': /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:779: undefined reference to `paircopy2' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:785: undefined reference to `paircopy2' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:792: undefined reference to `pairfind' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:816: undefined reference to `fr_MD5Init' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:817: undefined reference to `fr_MD5Update' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:818: undefined reference to `fr_MD5Update' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:819: undefined reference to `fr_MD5Update' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:820: undefined reference to `fr_MD5Final'/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:822: undefined reference to `paircreate' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:827: undefined reference to `pairreplace'/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:829: undefined reference to `pairreplace'/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:832: undefined reference to `pairreplace'.libs/radeapclient.o: In function `respond_eap_sim': /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:670: undefined reference to `paircopy2' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:675: undefined reference to `paircopy2' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:684: undefined reference to `pairfind' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:687: undefined reference to `paircreate' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:689: undefined reference to `pairreplace'.libs/radeapclient.o: In function `unmap_eapsim_types': /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:1374: undefined reference to `pairfind' .libs/radeapclient.o: In function `respond_eap_sim': /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:698: undefined reference to `pairfind' .libs/radeapclient.o: In function `process_eap_challenge': /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:499: undefined reference to `pairfind' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:500: undefined reference to `pairfind' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:518: undefined reference to `pairfind' .libs/radeapclient.o:/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:519: more undefined references to `pairfind' follow .libs/radeapclient.o: In function `process_eap_challenge': /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:632: undefined reference to `paircreate' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:634: undefined reference to `pairreplace'/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:640: undefined reference to `paircreate' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:646: undefined reference to `pairreplace'/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:648: undefined reference to `paircreate' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:651: undefined reference to `pairreplace'.libs/radeapclient.o: In function `respond_eap_sim': /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:754: undefined reference to `pairreplace'/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:760: undefined reference to `pairreplace'.libs/radeapclient.o: In function `main': /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:979: undefined reference to `fr_debug_flag' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:1002: undefined reference to `fr_debug_flag' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:1080: undefined reference to `dict_init' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:1081: undefined reference to `fr_perror' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:1085: undefined reference to `rad_alloc' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:1086: undefined reference to `fr_perror' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:1150: undefined reference to `ip_hton' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:1185: undefined reference to `pairfree' /ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap/radeapclient.c:1187: undefined reference to `readvp2' libeap/.libs/libfreeradius-eap.so: undefined reference to `fr_strerror' libeap/.libs/libfreeradius-eap.so: undefined reference to `fr_SHA1Final' libeap/.libs/libfreeradius-eap.so: undefined reference to `pairmake' libeap/.libs/libfreeradius-eap.so: undefined reference to `dict_valbyattr' libeap/.libs/libfreeradius-eap.so: undefined reference to `paircopy' libeap/.libs/libfreeradius-eap.so: undefined reference to `fr_SHA1Init' libeap/.libs/libfreeradius-eap.so: undefined reference to `fr_SHA1Update' libeap/.libs/libfreeradius-eap.so: undefined reference to `fr_hmac_sha1' libeap/.libs/libfreeradius-eap.so: undefined reference to `fr_SHA1FinalNoLen' libeap/.libs/libfreeradius-eap.so: undefined reference to `fr_SHA1Transform' collect2: ld returned 1 exit status gmake[6]: *** [radeapclient] Error 1 gmake[6]: Leaving directory `/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules/rlm_eap' gmake[5]: *** [rlm_eap] Error 2 gmake[5]: Leaving directory `/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules' gmake[4]: *** [all] Error 2 gmake[4]: Leaving directory `/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src/modules' gmake[3]: *** [modules] Error 2 gmake[3]: Leaving directory `/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src' gmake[2]: *** [all] Error 2 gmake[2]: Leaving directory `/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10/src' gmake[1]: *** [src] Error 2 gmake[1]: Leaving directory `/ws/karvind/projects/bugsmain3/thirdparty/freeradius/freeradius-server-2.1.10' make: *** [all] Error 2

2 1

radwho with exact match not happening
by djadav 02 Jun '11

02 Jun '11

Dear All, I have configured a radius, its working fine, i am not get proper output in radwho commnad. when we give radwho -R -u <username> it will give all user that match name. but i want to grep an exact match. For, Example, abc, abc1, abc123,abc1264 user is connected. Now when i give radwho -R -u abc then it will give all user connected with abc/abc1....... insted of exact match "abc" I have an automated script to disconnect an user with radzap, but it will not work in case of similar name bcos radwho giving me wrong output (multiple user output). Any one know how to grep an user with exact match via radwho or any other way to grep an exact user with nasip,nasport,etc.. Any help greatly appreciated Thanks in advance Regards Dilip -- View this message in context: http://freeradius.1045715.n5.nabble.com/radwho-with-exact-match-not-happeni… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 1

Server Sertificate
by Lubenski, Zeev [GCS] 02 Jun '11

02 Jun '11

We use EAP-TLS method, but in the Server Hello message don't want to send the certificate. How can it be disabled

5 7

Segmetation fault: [eap] Passing reply from proxy back into the tunnel
by Simon L. 02 Jun '11

02 Jun '11

Hi, my freeradius works as a proxy, terminates eap and proxy the request with mschap to another freeradius. When "Passing reply from proxy back into the tunnel" the proxy quits with a segmentation fault. This happens, with little difference, when sending the accept or reject back to NAS. EAP/PEAP-MS-CHAPv2 is working when using a local user from users file so that the request is not proxied. My System is Ubuntu 10.4.2 LTS Server and freeradius 2.1.10 from source. I hope anyone got this before and can give a solution. Please have a look in my debug log attached. Thank you very much! Simon FreeRADIUS Version 2.1.10, for host i686-pc-linux-gnu, built on Jun 1 2011 at 14:11:11 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/cui including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/dynamic_clients including configuration file /usr/local/etc/raddb/modules/otp including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/opendirectory including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/ntlm_auth including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/smsotp including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/perl including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/control-socket main { allow_core_dumps = yes } Core dumps are enabled. including dictionary file /usr/local/etc/raddb/dictionary main { prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm spot { nostrip authhost = radius.blabla accthost = radius2.blabla secret = testing123 } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 10.73.108.0/24 { require_message_authenticator = no secret = "testing123-3" shortname = "Spot" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /usr/local/etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /usr/local/etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /usr/local/etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /usr/local/etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server proxy-inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /usr/local/etc/raddb/eap.conf eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" CA_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = "secret" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/usr/local/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } verify { } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = no proxy_tunneled_request_as_eap = no virtual_server = "proxy-inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Checking post-proxy {...} for more modules to load } # modules } # server server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /usr/local/etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /usr/local/etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /usr/local/etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /usr/local/etc/raddb/modules/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /usr/local/etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /usr/local/etc/raddb/modules/files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /usr/local/etc/raddb/modules/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /usr/local/etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /usr/local/etc/raddb/modules/digest Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /usr/local/etc/raddb/modules/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /usr/local/etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /usr/local/etc/raddb/modules/detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/usr/local/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /usr/local/var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=127 User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201000c0174657374696164 Message-Authenticator = 0xa6136247aef9dc5a3dfc1e2cb7997c10 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 12 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.250 port 2048 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x872ceda5872ef416fcce132a807fa59a Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=254 Cleaning up request 0 ID 0 with timestamp +6 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x872ceda5872ef416 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 State = 0x872ceda5872ef416fcce132a807fa59a NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0202007919800000006f160301006a0100006603014de639bb9b38461024c267db6347e663e2e14fd28e1023ab230b2f18a49c46da000018002f00350005000ac013c014c009c00a003200380013000401000025ff010001000000000c000a00000774657374696164000a0006000400170018000b00020100 Message-Authenticator = 0x09d281d00ac9508e0108822c7fb30caa # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 121 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 111 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 006a], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 0804], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.250 port 2048 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x864886f70d01010505003081 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x872ceda5862ff416fcce132a807fa59a Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=139 Cleaning up request 1 ID 0 with timestamp +6 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x872ceda5862ff416 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 State = 0x872ceda5862ff416fcce132a807fa59a NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020300061900 Message-Authenticator = 0xda0bec72f89b8686c85db15af2b44f76 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.250 port 2048 EAP-Message = 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 EAP-Message = 0x746e672e6465312530230603550403131c544e4720414720436572746966696361746520417574686f7269747930820122300d06092a864886f70d01010105000382010f003082010a0282010100c40a310cdfc93a6829297beab24fbbdfb36a0d6586119d16983707330bb2d4b3f50b886545d88acff4ad7fbc698250f07693a3d892cf0585d19fb54139b0e6da9772e6141364a09baae13c780909dbc3473cdba711f661adce412ac7c9b9986d544d8566c1fd6589f4a32d9d70ea4b0baa32c8defbeb9b038c7a543b8773ca7430c4c8774eacbfe00f28fa302596a14af35bea4935114f79ecd0bc6ac4afda1306ad9755673a059625f079eb1fd6f8 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xd3f95b56a50d5669 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x872ceda58528f416fcce132a807fa59a Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=139 Cleaning up request 2 ID 0 with timestamp +7 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x872ceda58528f416 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 State = 0x872ceda58528f416fcce132a807fa59a NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020400061900 Message-Authenticator = 0x68f1caeac9dbb34e879ae67676ca8c97 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.250 port 2048 EAP-Message = 0x010500621900c1968a67eebfcdeec55b0476cd4c38736f08703b40119f8279fc6e5109780f013bbcf61c0a3499974e1f2b2b197f92b14b348919d48a976735aae2239b3420f3e1c220f1392aed5584a7016fbce4e11663f3f016030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x872ceda58429f416fcce132a807fa59a Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=471 Cleaning up request 3 ID 0 with timestamp +7 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x872ceda58429f416 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 State = 0x872ceda58429f416fcce132a807fa59a NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0205015019800000014616030101061000010201002fd2e04e279bf162c541aeee788f002b65735873489f21acd94660995587435dc0370fbfad1472db799b7303bebf29aca366663f0de56b89e680cecb6f8ad37c35fd58c0d68cce988cce7ca937afca0491956a51f6a8047e78292e99c9a8210af15691b862080636a300817b3ef75011b0ddc867d6e8694092b96deec5899a73677d8f1981b1dd130946d44454d3f507124fafe00d4400e6b46585cba802ac4c5f99d90cac556b77ee30c79a34570b131b2b0b4e6a57cf1fbc33e14c27fa1faf9e1ce2b099f88a32da92b4d1baf49f55dfdcd519b3f60875b1428a99c1bad3a5e9aaa881d69be353 EAP-Message = 0xbf638cf703605cb1f429cc16e4875a43eb7e402dbfc49c2614030100010116030100303dd7dd3b91da8e4a363a82f6debaae5f6705b526009a10487d46babb912ea45fd762cc20b5726d71ad9d327034712200 Message-Authenticator = 0x53c13b1af6b0f2dcb5a2e53bcaceefc9 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 326 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.250 port 2048 EAP-Message = 0x01060041190014030100010116030100309b393ca57780b79eb43b91305a280b65cd4ba48457e45e2b34e56ca754d6cfb214e09ca153dd0592850bb04e1b108ced Message-Authenticator = 0x00000000000000000000000000000000 State = 0x872ceda5832af416fcce132a807fa59a Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=139 Cleaning up request 4 ID 0 with timestamp +7 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x872ceda5832af416 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 State = 0x872ceda5832af416fcce132a807fa59a NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020600061900 Message-Authenticator = 0x077dbc205e7bcfc6ce2b51f5c0bd33b6 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.250 port 2048 EAP-Message = 0x0107002b190017030100204e0a45adfc896d12ef52ee91ae7e917c4d5a0843b9daf0082763105b76ab1736 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x872ceda5822bf416fcce132a807fa59a Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=176 Cleaning up request 5 ID 0 with timestamp +7 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x872ceda5822bf416 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 State = 0x872ceda5822bf416fcce132a807fa59a NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0207002b1900170301002002411188b62f7f0f621000198a3a5e51af322312f34dea684f00556e91d5320e Message-Authenticator = 0xaaafa27b546fd600c990d7004e13daf1 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - test [peap] Got inner identity 'test' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x0207000c0174657374696164 server { PEAP: Setting User-Name to test Sending tunneled request EAP-Message = 0x0207000c0174657374696164 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 server proxy-inner-tunnel { # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel +- entering group authorize {...} ++[control] returns notfound } # server proxy-inner-tunnel [peap] Got tunneled reply code 0 PEAP: Calling authenticate in order to initiate tunneled EAP session. # Executing group from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled PEAP: Cancelling proxy to realm spot until the tunneled EAP session has been established [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010800211a0108001c10afd44c27c37b79af35d30add84bfef9874657374696164 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x387020c438783a8a5d7d9ae55d393176 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.250 port 2048 EAP-Message = 0x0108004b1900170301004037cceb9590851e01d3aa19f1c45feba5cfa13fb066dd3f58cc0f9d187f5b7e19da62d37bbc2fad7332dba399a98d25c3133ca262b780365bf5ac93687420ef18 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x872ceda58124f416fcce132a807fa59a Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=240 Cleaning up request 6 ID 0 with timestamp +7 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x872ceda58124f416 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 State = 0x872ceda58124f416fcce132a807fa59a NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0208006b190017030100607a6e689c4a295b547d02ac764e369bdfa17c731c1a76bb532b99b82bf7b0920586378032ef2fcba3b91d178da911a71be5bc91d69c3de80fefcc9aa0629517ff15fdabe224a1ed7298c61a5e8408038259c765999b88ca7df972c2cfa0f708f4 Message-Authenticator = 0xe4230d4626e2d4b863a9c04b1303eb07 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 8 length 107 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020800421a0208003d312d2fa39213a4c0a56b970e13741f723500000000000000000e32e5c11d31a3f2315821c2cdfc09c9c5b5833f59459d6c0074657374696164 server { PEAP: Setting User-Name to test Sending tunneled request EAP-Message = 0x020800421a0208003d312d2fa39213a4c0a56b970e13741f723500000000000000000e32e5c11d31a3f2315821c2cdfc09c9c5b5833f59459d6c0074657374696164 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "test" State = 0x387020c438783a8a5d7d9ae55d393176 NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 server proxy-inner-tunnel { # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel +- entering group authorize {...} ++[control] returns notfound } # server proxy-inner-tunnel [peap] Got tunneled reply code 0 PEAP: Calling authenticate in order to initiate tunneled EAP session. # Executing group from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [eap] Not-EAP proxy set. Not composing EAP ++[eap] returns handled PEAP: Tunneled authentication will be proxied to spot PEAP: Remembering to do EAP-MS-CHAP-V2 post-proxy. [eap] Tunneled session will be proxied. Not doing EAP. ++[eap] returns handled WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 142 to 111.111.111.111 port 1812 User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 MS-CHAP-Challenge = 0xafd44c27c37b79af35d30add84bfef98 MS-CHAP2-Response = 0x08652d2fa39213a4c0a56b970e13741f723500000000000000000e32e5c11d31a3f2315821c2cdfc09c9c5b5833f59459d6c Proxy-State = 0x30 Proxying request 7 to home server 111.111.111.111 port 1812 Sending Access-Request of id 142 to 111.111.111.111 port 1812 User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 MS-CHAP-Challenge = 0xafd44c27c37b79af35d30add84bfef98 MS-CHAP2-Response = 0x08652d2fa39213a4c0a56b970e13741f723500000000000000000e32e5c11d31a3f2315821c2cdfc09c9c5b5833f59459d6c Proxy-State = 0x30 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Accept packet from host 111.111.111.111 port 1812, id=142, length=182 MS-CHAP2-Success = 0x08533d36303641433945394338314132343242413137463035344338314632353339364339423531354642 MS-MPPE-Recv-Key = 0x6402c90b25701f12a1f003586fa0067e MS-MPPE-Send-Key = 0x26ceb550531337a9bba59aa8ad27a46d MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 Proxy-State = 0x30 # Executing section post-proxy from file /usr/local/etc/raddb/sites-enabled/default +- entering group post-proxy {...} [eap] Doing post-proxy callback [eap] Passing reply from proxy back into the tunnel. server proxy-inner-tunnel { [eap] Passing reply back for EAP-MS-CHAP-V2 # Executing section post-proxy from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel +- entering group post-proxy {...} ++[eap] returns noop WARNING: Empty post-auth section. Using default return values. } # server proxy-inner-tunnel [eap] Final reply from tunneled session code 2 MS-CHAP2-Success = 0x08533d36303641433945394338314132343242413137463035344338314632353339364339423531354642 MS-MPPE-Recv-Key = 0x6402c90b25701f12a1f003586fa0067e MS-MPPE-Send-Key = 0x26ceb550531337a9bba59aa8ad27a46d MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 Proxy-State = 0x30 [eap] Got reply 2

4 10

Server Sertificate
by Lubenski, Zeev [GCS] 01 Jun '11

01 Jun '11

We use EAP-TLS method, but in the Server Hello message don't want to send the certificate. How can it be disabled

1 1

Wiki - once upon a time there was documentation
by den2k 01 Jun '11

01 Jun '11

Hi to all, what happened to the contents of the wiki? A lot of stuff is missing, for example http://wiki.freeradius.org/Operators now has nothing more than a few badly explained examples and the table of the operators is missing. Also I couldn't find a lot of stuff that I'm sure there was on the wiki. Also searching stuff is now a pain. Is the old version still accessible in some way? Thanks to all, Denis -- \ __ __ _ * _\ \__\ \ \ _\ \/ \_\ \__ \ \ \__ \\ -------------------------> Registered Linux User # 372295 -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS/CM d--- s:+: a-- C+++ UL+++S E--- W+(-) N o+ w--- O? M-- PS+ PE Y+ PGP t+(++) 5? X- R* tv-- b+ DI+ D++++ G+ e h! r++ y* ------END GEEK CODE BLOCK------

6 12