April 2012 - Freeradius-Users - lists.freeradius.org

Authentication problems
by pessimist 19 Apr '12

19 Apr '12

I've been trying to update from freeradius ver 1.1.3 to freeradius 2.1.9 and can't get past the authentication failure shown in the log below. I thought I had made the neessary changes to the database but clearly not. Can't see where to go from here. Any help would be much appreciated. radius=# select * radius-# from radcheck radius-# where radius-# username = 'ABC' radius-# ; id | username | attribute | op | value ------+----------+--------------------+----+------- 5220 | ABC | Simultaneous-Use | := | 1 5219 | ABC | Cleartext-Password | := | 123 radius=# select * radius-# from radusergroup radius-# ; username | groupname | priority ----------+-----------+---------- PW | dynamic | 0 CB | dynamic | 0 ABC | dynamic | 0 FreeRADIUS Version 2.1.9, for host i386-redhat-linux-gnu, built on May 24 2010 at 16:22:24 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/control-socket main { user = "radiusd" group = "radiusd" allow_core_dumps = no } including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 192.168.5.0/24 { require_message_authenticator = no secret = "testing123" shortname = "private-network-1" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.5.241 port 2053, id=160, length=226 ChilliSpot-Version = "1.0.11" User-Name = "ABC" CHAP-Challenge = 0x014f905c247fbaff1c852626260eae46 CHAP-Password = 0x00d5bd4083f746f787200a86229bcda7a2 NAS-IP-Address = 192.168.69.1 Service-Type = Login-User Framed-IP-Address = 192.168.69.132 Calling-Station-Id = "00-19-7D-6A-E7-67" Called-Station-Id = "00-1A-70-89-4F-EC" NAS-Identifier = "nas01" Acct-Session-Id = "4f8c231f00000001" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 WISPr-Logoff-URL = "http://192.168.69.1:3990/logoff" Message-Authenticator = 0xecf023c0d37b8e6451f63af3277a6882 +- entering group authorize {...} ++[preprocess] returns ok [chap] Setting 'Auth-Type := CHAP' ++[chap] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "ABC", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = CHAP +- entering group CHAP {...} [chap] login attempt by "ABC" with CHAP password [chap] Cleartext-Password is required for authentication ++[chap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> ABC attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 160 to 192.168.5.241 port 2053 Waking up in 4.9 seconds. Cleaning up request 0 ID 160 with timestamp +16 Ready to process requests. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Authentication-problems-tp5644080p5… Sent from the FreeRadius - User mailing list archive at Nabble.com.

4 8

Duplicate Radius Packets to another server
by Nasser Heidari 19 Apr '12

19 Apr '12

3 2

Configuring Freeradius with LDAP
by Wassim Zaarour 19 Apr '12

19 Apr '12

Hi List, I have installed freeradius 2.1.12, and it's working well. Now I need to configure it to authenticate with LDAP (Sun Directory Server) but I can't seem to find which file to configure in raddb, I can't find it in radiusd.conf I appreciated any help on this. Wassim C. Zaarour Systems & Network Engineer

3 3

rlm_ippool does not create DB and IDX files
by rogiermulder 18 Apr '12

18 Apr '12

I have a working freeradius installation (v2.1.10, Ubuntu package) with rlm_ippool working like a charm. Now I'm installing a new server (CentOS 6) with the freeradius (v2.1.10) installed as package. It install the rlm_ippool.so module so I assume ippool supprot is compiled in. I've copied the radiusd.conf, modules/ippool and users file from the old (working) server to my new on. When I start radiusd, no DB and IDX files for the pools are created. The old server howerver, does create these files using the same config files. When I 'strace' radiusd at startup, I see that it opens and reads modules/ippool. radiusd.conf: prefix = / exec_prefix = ${prefix} sysconfdir = ${prefix}/etc raddbdir = ${sysconfdir}/radius db_dir = ${raddbdir} modules/ippool: ippool m2m.sycada.vodafone.de_pool { range-start = 10.242.128.0 range-stop = 10.242.255.254 netmask = 255.255.0.0 cache-size = 32768 session-db = ${raddbdir}/db.m2m.sycada.vodafone.de_pool ip-index = ${raddbdir}/idx.m2m.sycada.vodafone.de_pool override = no maximum-timeout = 0 key = "%{Calling-Station-ID}" users: DEFAULT Service-Type == Framed-User MS-Primary-DNS-Server += 172.17.98.22, MS-Secondary-DNS-Server += 172.17.98.24, Fall-Through = Yes myuid Cleartext-Password := "secret", Called-Station-Id == "m2m.sycada.vodafone.de", Pool-Name := "m2m.sycada.vodafone.de_pool" Session-Timeout <= 604800 /usr/sbin/radius -X: FreeRADIUS Version 2.1.10, for host i686-pc-linux-gnu, built on Jul 19 2011 at 10:16:18 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/dynamic_clients including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/opendirectory including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/control-socket including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { user = "radiusd" group = "radiusd" allow_core_dumps = no } including dictionary file /etc/raddb/dictionary main { prefix = "/" localstatedir = "//var" logdir = "//var/log/radius" libdir = "//lib" radacctdir = "//var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "//var/run/radiusd/radiusd.pid" checkrad = "//sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = yes } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/raddb/modules/unix unix { radwtmp = "//var/log/radius/radwtmp" } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/raddb/modules/files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp radutmp { filename = "//var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/raddb/modules/digest Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/raddb/modules/preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/raddb/modules/detail detail { detailfile = "//var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 1812 } listen { type = "acct" ipaddr = * port = 1813 } listen { type = "control" listen { socket = "//var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file //var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Ready to process requests. I can not see any difference in the freeradius config. Anby help is greatly appreciated! Rogier Mulder -- View this message in context: http://freeradius.1045715.n5.nabble.com/rlm-ippool-does-not-create-DB-and-I… Sent from the FreeRadius - User mailing list archive at Nabble.com.

4 5

Freeradius with Cisco Wireless Controller
by Martin Silvero 18 Apr '12

18 Apr '12

Hi, I use freeradius with cisco access point and vlans assignment, work fine but now I try to use Cisco Wireless Controller and the vlan assignment dont work. Can you help me? I send the logs: Many thanks! Log without acces points and wireless controller: .... server inner-tunnel { +- entering group authorize {...} ++[preprocess] returns ok ++? if (!Huntgroup-Name) ? Evaluating !(Huntgroup-Name) -> TRUE ++? if (!Huntgroup-Name) -> TRUE ++- entering if (!Huntgroup-Name) {...} +++[reply] returns ok ++- if (!Huntgroup-Name) returns ok ++? if (Huntgroup-Name == "list") (Attribute Huntgroup-Name was not found) .... dont check groups. Log with acces points only: server inner-tunnel { +- entering group authorize {...} ++[preprocess] returns ok ++? if (!Huntgroup-Name) ? Evaluating !(Huntgroup-Name) -> FALSE ++? if (!Huntgroup-Name) -> FALSE ++? if (Huntgroup-Name == "list") ? Evaluating (Huntgroup-Name == "list") -> TRUE ++? if (Huntgroup-Name == "list") -> TRUE ++- entering if (Huntgroup-Name == "list") {...} +++? if (Ldap-Group == "WIFI-Direccion") rlm_ldap: Entering ldap_groupcmp() .... In this case check each group The config is the same. freeradius work with cisco wireless controller? Thanks!

3 2

Re: Freeradius with Cisco Wireless Controller
by Alan Buxey 18 Apr '12

18 Apr '12

Those logs don't show anything useful. Cisco wireless controllers work fine with freeradius, we've been using them since day 1 with our FR through the years. What attributes are you sending and is the WLAN configured for vlan override if you are assigning vlan by FR? alan -- This smartphone has free WiFi worldwide with eduroam, now that IS smart

1 0

Auth-Type Fall-Through & ldap timeouts
by Tobias Hachmer 18 Apr '12

18 Apr '12

Hello list, I'm using a sql database for authorization and ldap for authentication. For fail-over reasons I want to authenticate against user-password information stored in my sql database if my ldap servers are not available (all ldap modules return fail). For authentication I configured: Auth-Type LDAP { redundant-load-balance { ldap1 ldap2 ldap3 } if(fail) { pap } } So I set the network interfaces of my ldap servers manually to down and startet testing. But the timeouts for every ldap module are too big (circa 50 seconds). I noticed the timeout directives in the ldap module. In all three ldap modules the net_timeout is set to "1". Question 1: How can I reduce these timeouts? Question 2: Can I check earlier my ldap servers are available and if not skip Auth-Type LDAP or setting Auth-Type to PAP? Question 3: Are there any other opportunities to do Auth-Type PAP if Auth-Type LDAP fails? Thanks in advance, Tobias Hachmer

3 6