October 2016 - Freeradius-Users - lists.freeradius.org

rlm_rest / SSL one way and server certificate check
by Chaigneau, Nicolas 24 Oct '16

24 Oct '16

Hello, I'm using rlm_rest module. I'm trying to have the client check the server certificate (SSL one way), using the following options: rest { tls { ca_file = <where I've put my CA file> check_cert = "yes" } } However I can't get this to work. Apparently the option set by FreeRADIUS (CURLOPT_ISSUERCERT) is ignored by Curl, which instead uses a "bundle of certificates" located in: /etc/pki/tls/certs/ca-bundle.crt I've put libcurl in verbose mode, which outputs the following: * Connected to 10.67.141.75 (10.67.141.75) port 8443 (#1) * Cipher selection: ALL:!EXPORT:!EXPORT40:!EXPORT56:!aNULL:!LOW:!RC4:@STRENGTH * successfully set certificate verify locations: * CAfile: /etc/pki/tls/certs/ca-bundle.crt CApath: none * SSL certificate problem: unable to get local issuer certificate * Curl_http_done: called premature == 1 * Closing connection 1 This works if I change rlm_rest code, so that option CURLOPT_CAINFO is set instead of CURLOPT_ISSUERCERT. So... is it supposed to work with CURLOPT_ISSUERCERT ? if so what am I doing wrong ? Regards, Nicolas. This message contains information that may be privileged or confidential and is the property of the Capgemini Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message.

3 6

Print variables to debug output
by Daniel Wruck 24 Oct '16

24 Oct '16

I am new to FreeRADIUS and am setting up my environment. I am running Ubuntu 16.04 LTS and FreeRADIUS Version 2.2.8. My question is not really version dependent and might be answered with just 'NO'. Is there any way in FreeRADIUS or unlang to print a string or the value of a variable when running FreeRADIUS -X? Is there a print %{User-Name} or stdout 'Custom mschap module just completed' that would just throw add it inline to the output? It would help me to know the value of a param mid-code or to trace the order of when a certain line of code was run. I have searched unsuccessfully to find anyone say that it could or could not be done. Dan W

4 3

Building 3.0.12 on Debian Jessie: rlm_cache_memcached.so missing
by Martin Pauly 21 Oct '16

21 Oct '16

Hello, when trying to build 3.0.12 on Debian Jessie, I've encountered two errors so far: #1 was solved by Martin Stanislav's hint: > Change one line within debian/patches/disable-dhcp-bydefault.diff > ... #2 is this: dh_install --sourcedir=/root/freeradius-server-3.0.12/debian/tmp -p freeradius-memcached install -d debian/freeradius-memcached//usr/lib/freeradius cp -a debian/tmp/usr/lib/freeradius/rlm_cache_memcached.so debian/freeradius-memcached//usr/lib/freeradius/ cp: cannot stat debian/tmp/usr/lib/freeradius/rlm_cache_memcached.so: No such file or directory dh_install: cp -a debian/tmp/usr/lib/freeradius/rlm_cache_memcached.so debian/freeradius-memcached//usr/lib/freeradius/ returned exit code 1 debian/rules:148: recipe for target 'install-arch' failed in a quick search, I could find no hint as where things go wrong, but that's little surpring, as presumably it is _missing_ from some source file list (or something similar). Cheers, Martin -- Dr. Martin Pauly Phone: +49-6421-28-23527 HRZ Univ. Marburg Fax: +49-6421-28-26994 Hans-Meerwein-Str. E-Mail: pauly(a)HRZ.Uni-Marburg.DE D-35032 Marburg

2 2

rlm_perl SOFT ASSERT FAILED 3.0.12
by Thor Spruyt 21 Oct '16

21 Oct '16

Hi, I was wondering if anyone else came across this "SOFT ASSERT FAILED" message with v3.0.12 and rlm_perl. It seems to have no functional impact whatsoever however, but it worries me and I don't know what could be causing this. SOFT ASSERT FAILED src/modules/rlm_perl/rlm_perl.c[703]: *vps Thor

2 2

Question about the supplied config file for tls
by Alex Sharaz 20 Oct '16

20 Oct '16

Hi, For a while I've been playing with configuring a rad sec link between 2 FR 3.0.x servers so sitting on eduroam at work, I could proxy auth requests off for alex(a)shsarax.info via a radsec link to one of my servers in the cloud and getting an access-accept back so I could log onto eduroam. Got that all working so thought I'd do he same thing for FR 3.1.x as I also wanted to play with the tls-cache stuff. Slight problem with porting my renamed tls confgi to V3.1.0 1). All the other server configs have "server <name>" at the start of each config ... guess thats a 3.1 thing. but in the source tree every sites-avaialble file has server.... except the tls one. Wrap server eduroam-radsec round my tls config file and I now get Thu Oct 20 13:23:46 2016 : Error : /etc/freeradius/sites-enabled/eduroam-radsec[8]: Failed to find clients radsec {...} Take the supplied tls file, wrap server ..... round it .... and get the same error. I've definitely got a section saying clients radsec { ... } in both my file and the tls sample supplied in raddb Any changes in format of the tls server config that didn't get into the supplied config file? Rgds Alex

2 2

inner-eap
by Brian Candler 20 Oct '16

20 Oct '16

[Looking at 3.0.x branch] In raddb/mods-available/inner-eap there is a definition of "inner-eap". But as far as I can tell, this is not referenced from anywhere. Was it intended that the inner-tunnel server should use inner-eap instead of eap? It would seem to make sense - we don't want to enable TLS/TTLS/PEAP being used inside a TTLS/PEAP tunnel. Regards, Brian.

3 2

Instrumentation for monitoring ntlm_auths against domain controllers
by Paul Seward 20 Oct '16

20 Oct '16

Hi all, Apologies if this isn't directly on-topic, but there are a lot of people on this mailing list who are familiar with what I want to achieve, and may be able to point me in the right direction. I'm happy to field off-list replies if that's more appropriate. We're running freeradius 3.0.12, samba/winbind 4.2.10 on CentOS 7.2. We're quite cheerfully authenticating our users against AD using the winbind_username/winbind_domain parameters in the mschap module, which is a reasonably common configuration and generally works well for us (and has noticably less overhead than the traditional ntlm_auth mechanism) Yesterday, we saw a spike in authentication latency that was big enough to cause an impact to users on our wireless network, and we're trying to do some root cause analysis. We have a nagios check in place which uses ntlm_auth to do a test authentication against the domain, and that showed a corresponding spike in latency - which points the finger at AD in general, but doesn't give us useful data to pass to our windows team as it's not easy to pin down which domain controller(s) the radius servers were talking to at the time. What I'd like to do, is put some instrumentation in place that would allow our monitoring server to fire ntlm_auth's at a specified domain controller (rather than whichever one winbind happens to have connected to) so that we can monitor latency to all of them, and use the resulting graphs to pinpoint any that are under performing. I can't see an obvious way to make that happen, so if anyone has any pointers we'd really appreciate it! -Paul -- ---------------------------------------------------------------------- Paul Seward, Senior Systems Administrator, University of Bristol Paul.Seward(a)bristol.ac.uk +44 (0)117 39 41148 GPG Key ID: E24DA8A2 GPG Fingerprint: 7210 4E4A B5FC 7D9C 39F8 5C3C 6759 3937 E24D A8A2

3 4

Mac address rejecting
by Alex Sharaz 20 Oct '16

20 Oct '16

o.k. Found a thread about sending access rejects if a mac address is in a file, so, on FR 3.0.12 I did passwd rejectmac { filename = ${confdir}/rejectmac delimiter = , format = "*Calling-Station-Id" } put AA-BB-CC-DD-EE-FF in /etc/freeradius/rejectmac, new line at end Edited /etc/sites-enabled/default to have if(Calling-Station-Id) { # if ("%{sql:SELECT count(*) from mac_addresses where mac_address='%{Calling-Station-Id}'and device_type=26}" > 0) { rejectmac if(ok){ update control { &Auth-Type := Reject } update reply { &Reply-Message := "quarantined, contact ITSO" } } } # ...... and everything gets rejected! remove everything from /etc/freeradius/rejectmac ...... and still things get rejected.

2 3

IPPool not logging to radius.log on FreeRadius 3.0.12
by Nataniel Klug 19 Oct '16

19 Oct '16

Hello, I am running FreeRadius 3.0.12 compiled from source on Debian 8.6. The problem I am facing is that module ippool is not logging allocation, release, etc, to the syslog daemon. I have this in my log: Wed Oct 19 14:45:46 2016 : Auth: (0) Login OK: [teste-sql] (from client CSC-755-rt-01 port 15728697 cli E4:8D:8C:EC:90:A2) Wed Oct 19 14:45:55 2016 : Auth: (3) Login OK: [teste-sql] (from client CSC-755-rt-01 port 15728698 cli E4:8D:8C:EC:90:A2) When I run in debug mode (-Xx), I can see the module ippool sending the log message, I just can't see to where: Wed Oct 19 14:54:41 2016 : Debug: (0) sqlippool: EXPAND UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = NOW() + INTERVAL 1920 SECOND WHERE framedipaddress = '192.168.0.4' AND expiry_time IS NULL Wed Oct 19 14:54:41 2016 : Debug: (0) sqlippool: --> UPDATE radippool SET nasipaddress = '187.19.96.40', pool_key = '15728701', callingstationid = 'E4:8D:8C:EC:90:A2', username = 'teste-sql', expiry_time = NOW() + INTERVAL 1920 SECOND WHERE framedipaddress = '192.168.0.4' AND expiry_time IS NULL Wed Oct 19 14:54:41 2016 : Debug: (0) sqlippool: Executing query: UPDATE radippool SET nasipaddress = '187.19.96.40', pool_key = '15728701', callingstationid = 'E4:8D:8C:EC:90:A2', username = 'teste-sql', expiry_time = NOW() + INTERVAL 1920 SECOND WHERE framedipaddress = '192.168.0.4' AND expiry_time IS NULL Wed Oct 19 14:54:41 2016 : Debug: rlm_sql_mysql: Rows matched: 1 Changed: 1 Warnings: 0 Wed Oct 19 14:54:41 2016 : Debug: COMMIT Wed Oct 19 14:54:41 2016 : Debug: Parsed xlat tree: Wed Oct 19 14:54:41 2016 : Debug: literal --> COMMIT Wed Oct 19 14:54:41 2016 : Debug: (0) sqlippool: EXPAND COMMIT Wed Oct 19 14:54:41 2016 : Debug: (0) sqlippool: --> COMMIT Wed Oct 19 14:54:41 2016 : Debug: (0) sqlippool: Executing query: COMMIT Wed Oct 19 14:54:41 2016 : Debug: rlm_sql (sql): Released connection (3) Wed Oct 19 14:54:41 2016 : Debug: Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name}) Wed Oct 19 14:54:41 2016 : Debug: Parsed xlat tree: Wed Oct 19 14:54:41 2016 : Debug: literal --> Allocated IP: Wed Oct 19 14:54:41 2016 : Debug: attribute --> Framed-IP-Address Wed Oct 19 14:54:41 2016 : Debug: literal --> from Wed Oct 19 14:54:41 2016 : Debug: attribute --> Pool-Name Wed Oct 19 14:54:41 2016 : Debug: literal --> (did Wed Oct 19 14:54:41 2016 : Debug: attribute --> Called-Station-Id Wed Oct 19 14:54:41 2016 : Debug: literal --> cli Wed Oct 19 14:54:41 2016 : Debug: attribute --> Calling-Station-Id Wed Oct 19 14:54:41 2016 : Debug: literal --> port Wed Oct 19 14:54:41 2016 : Debug: attribute --> NAS-Port Wed Oct 19 14:54:41 2016 : Debug: literal --> user Wed Oct 19 14:54:41 2016 : Debug: attribute --> User-Name Wed Oct 19 14:54:41 2016 : Debug: literal --> ) Wed Oct 19 14:54:41 2016 : Debug: (0) sqlippool: EXPAND Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name}) Wed Oct 19 14:54:41 2016 : Debug: (0) sqlippool: --> Allocated IP: 192.168.0.4 from main_pool (did CSC-755-rt-01 cli E4:8D:8C:EC:90:A2 port 15728701 user teste-sql) Wed Oct 19 14:54:41 2016 : Debug: (0) modsingle[post-auth]: returned from sqlippool (rlm_sqlippool) Wed Oct 19 14:54:41 2016 : Debug: (0) [sqlippool] = ok Wed Oct 19 14:54:41 2016 : Debug: (0) } # post-auth = ok Wed Oct 19 14:54:41 2016 : Auth: (0) Login OK: [teste-sql] (from client CSC-755-rt-01 port 15728701 cli E4:8D:8C:EC:90:A2) Wed Oct 19 14:54:41 2016 : Debug: (0) Sent Access-Accept Id 166 from 186.251.148.124:1812 to 187.19.96.40:44668 length 0 Wed Oct 19 14:54:41 2016 : Debug: (0) Mikrotik-Rate-Limit = "32k" Wed Oct 19 14:54:41 2016 : Debug: (0) Framed-IP-Address = 192.168.0.4 Wed Oct 19 14:54:41 2016 : Debug: (0) Finished request I can't see the reason that sqlippool is not seding the log to syslog: Allocated IP: 192.168.0.4 from main_pool (did CSC-755-rt-01 cli E4:8D:8C:EC:90:A2 port 15728701 user teste-sql) Atenciosamente, *Nataniel Klug* | nataniel.klug(a)gmail.com

2 4

SASL AuthN to LDAP
by Brendan Kearney 19 Oct '16

19 Oct '16

i am trying to use a Kerberos keytab file to authenticate to LDAP. the keytab file is the same one used to authenticate users against the Kerberos database. the principal in the keytab has been mapped to an object in LDAP, for access to be granted. i dont seem to be getting the configs correct for the LDAP binds to work. can you shed light on what i am missing? i am setting KRB5_CLIENT_KTNAME = '/etc/raddb/radius.keytab' in the sasl {} stanzas in mods-available/ldap, which is linked to mods-enabled/. the radiusd -X output below indicates that anonymous binds are being attempted. this seems to indicate the keytab is not being picked up and the identity is not being found. i can run a 'kinit -kt /etc/raddb/radius.keytab' and get a TGT back. i can also run 'ldapwhoami' with that TGT and get the mapped LDAP identity back. am i going about setting the KRB5_CLIENT_KTNAME wrong? freeradius version 3.0.10 (packaged for fedora 24) Copyright (C) 1999-2015 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/krb5 including configuration file /etc/raddb/mods-enabled/ldap including configuration file /etc/raddb/mods-enabled/sql including configuration file /etc/raddb/mods-config/sql/main/mysql/queries.conf including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/canonicalization.orig including configuration file /etc/raddb/policy.d/canonicalization including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = digest # Creating Auth-Type = LDAP radiusd: #### Instantiating modules #### # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 1024 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = no require_encryption = yes require_strong = yes with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_krb5 # Loading module "krb5" from file /etc/raddb/mods-enabled/krb5 krb5 { keytab = "/etc/raddb/radius.keytab" service_principal = "radius/server1.bpk2.com" } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/raddb/mods-enabled/ldap ldap { server = "server1.bpk2.com" sasl { mech = "GSSAPI" realm = "BPK2.COM" } read_clients = yes user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=bpk2,dc=com" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_sql # Loading module "sql" from file /etc/raddb/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "database.bpk2.com" port = 3306 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group instantiate { } modules { # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "krb5" from file /etc/raddb/mods-enabled/krb5 Using MIT Kerberos library rlm_krb5 (krb5): Using service principal "radius/server1.bpk2.com@" rlm_krb5 (krb5): Using keytab "FILE:/etc/raddb/radius.keytab" rlm_krb5 (krb5): Initialising connection pool pool { start = 10 min = 4 max = 10 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 1 spread = no } rlm_krb5 (krb5): Opening additional connection (0), 1 of 10 pending slots used rlm_krb5 (krb5): Opening additional connection (1), 1 of 9 pending slots used rlm_krb5 (krb5): Opening additional connection (2), 1 of 8 pending slots used rlm_krb5 (krb5): Opening additional connection (3), 1 of 7 pending slots used rlm_krb5 (krb5): Opening additional connection (4), 1 of 6 pending slots used rlm_krb5 (krb5): Opening additional connection (5), 1 of 5 pending slots used rlm_krb5 (krb5): Opening additional connection (6), 1 of 4 pending slots used rlm_krb5 (krb5): Opening additional connection (7), 1 of 3 pending slots used rlm_krb5 (krb5): Opening additional connection (8), 1 of 2 pending slots used rlm_krb5 (krb5): Opening additional connection (9), 1 of 1 pending slots used # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20444 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://server1.bpk2.com:389 rlm_ldap (ldap): Starting SASL mech(s): GSSAPI SASL/GSSAPI authentication started rlm_ldap (ldap): Bind with (anonymous) to ldap://server1.bpk2.com:389 failed: Local error rlm_ldap (ldap): Opening connection failed (0) rlm_ldap (ldap): Removing connection pool /etc/raddb/mods-enabled/ldap[8]: Instantiation failed for module "ldap"

4 11