February 2017 - Freeradius-Users - lists.freeradius.org

3.0.12 ignoring HUP (No files changed), albeit changes in passwd-file?
by macservo 13 Feb '17

13 Feb '17

Hello, I´m running 3.0.12 and use the passwd-module of 3.0.13 (because of "notfound") After changes in the passwd-file, the server receives a HUP. This worked in 2.0.2 3.0.12 will give me > Info: HUP - No files changed. Ignoring I can confirm, that the passwd-file has changed, since the server has started. What am I doing wrong? (Found some entries in the mailing list, that this was a problem in older versions but should have been fixed since 3.0.10?) Is it better to change to 3.0.13 completely? Is it stable? Thank you very much.

3 2

rlm_rest with Freeradius
by Thomas Massip 13 Feb '17

13 Feb '17

Hi all, I actually use FreeRADIUS Version 3.0.13 with PacketFence and I have an issue when i try the rlm_rest. If somoene Know why i have this issue : rest: ERROR: Server returned: (0) rest: ERROR: {"Reply-Message":"PacketFence does not support this switch for read/write access login","reply:PacketFence-Authorization-Status":"allow"} This is my output radius -x : 0) Received Access-Request Id 10 from 192.168.10.14:1812 to 192.168.10.22:1812 length 122 (0) User-Name = "UserTest" (0) User-Password = "p@55word" (0) Service-Type = Framed-User (0) Framed-Protocol = PPP (0) NAS-Identifier = "las1.albari" (0) NAS-Port-Type = Ethernet (0) Acct-Session-Id = "las1.al00000000000000da6bb650001055" (0) NAS-IP-Address = 192.168.10.14 (0) # Executing section authorize from file /usr/local/pf/raddb/sites-enabled/packetfence (0) authorize { (0) update { (0) EXPAND %{Packet-Src-IP-Address} (0) --> 192.168.10.14 (0) &request:FreeRADIUS-Client-IP-Address := 192.168.10.14 (0) &control:PacketFence-RPC-Server = 127.0.0.1 (0) &control:PacketFence-RPC-Port = 7070 (0) &control:PacketFence-RPC-User = (0) &control:PacketFence-RPC-Pass = (0) &control:PacketFence-RPC-Proto = http (0) EXPAND %l (0) --> 1486992205 (0) &control:Tmp-Integer-0 := 1486992205 (0) &control:PacketFence-Request-Time := 0 (0) } # update = noop (0) policy rewrite_calling_station_id { (0) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (0) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy rewrite_calling_station_id = noop (0) policy rewrite_called_station_id { (0) if ((&Called-Station-Id) && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})(:(.+))?$/i)) { (0) if ((&Called-Station-Id) && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})(:(.+))?$/i)) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy rewrite_called_station_id = noop (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = noop (0) } # policy filter_username = noop (0) policy filter_password { (0) if (&User-Password && (&User-Password != "%{string:User-Password}")) { (0) EXPAND %{string:User-Password} (0) --> p@55word (0) if (&User-Password && (&User-Password != "%{string:User-Password}")) -> FALSE (0) } # policy filter_password = noop (0) [preprocess] = ok (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "UserTest", skipping NULL due to config. (0) [suffix] = noop (0) ntdomain: Checking for prefix before "\" (0) ntdomain: No '\' in User-Name = "UserTest", looking up realm NULL (0) ntdomain: Found realm "null" (0) ntdomain: Adding Stripped-User-Name = "UserTest" (0) ntdomain: Adding Realm = "null" (0) ntdomain: Authentication realm is LOCAL (0) [ntdomain] = ok (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) if ( !EAP-Message ) { (0) if ( !EAP-Message ) -> TRUE (0) if ( !EAP-Message ) { (0) update { (0) &control:Auth-Type := Accept (0) } # update = noop (0) } # if ( !EAP-Message ) = noop (0) policy packetfence-eap-mac-policy { (0) if ( &EAP-Type ) { (0) if ( &EAP-Type ) -> FALSE (0) [noop] = noop (0) } # policy packetfence-eap-mac-policy = noop (0) pap: WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! (0) pap: WARNING: !!! Ignoring control:User-Password. Update your !!! (0) pap: WARNING: !!! configuration so that the "known good" clear text !!! (0) pap: WARNING: !!! password is in Cleartext-Password and NOT in !!! (0) pap: WARNING: !!! User-Password. !!! (0) pap: WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! (0) pap: WARNING: Auth-Type already set. Not setting to PAP (0) [pap] = noop (0) } # authorize = ok (0) Found Auth-Type = Accept (0) Auth-Type = Accept, accepting the user (0) # Executing section post-auth from file /usr/local/pf/raddb/sites-enabled/packetfence (0) post-auth { (0) update { (0) EXPAND %{Packet-Src-IP-Address} (0) --> 192.168.10.14 (0) &request:FreeRADIUS-Client-IP-Address := 192.168.10.14 (0) &control:PacketFence-RPC-Server = 127.0.0.1 (0) &control:PacketFence-RPC-Port = 7070 (0) &control:PacketFence-RPC-User = (0) &control:PacketFence-RPC-Pass = (0) &control:PacketFence-RPC-Proto = http (0) } # update = noop (0) if (! EAP-Type || (EAP-Type != TTLS && EAP-Type != PEAP) ) { (0) if (! EAP-Type || (EAP-Type != TTLS && EAP-Type != PEAP) ) -> TRUE (0) if (! EAP-Type || (EAP-Type != TTLS && EAP-Type != PEAP) ) { rlm_rest (rest): Closing connection (0): Hit idle_timeout, was idle for 282 seconds rlm_rest (rest): Closing connection (1): Hit idle_timeout, was idle for 282 seconds rlm_rest (rest): Closing connection (2): Hit idle_timeout, was idle for 282 seconds rlm_rest (rest): You probably need to lower "min" rlm_rest (rest): Closing connection (3): Hit idle_timeout, was idle for 282 seconds rlm_rest (rest): You probably need to lower "min" rlm_rest (rest): Closing connection (4): Hit idle_timeout, was idle for 282 seconds rlm_rest (rest): You probably need to lower "min" rlm_rest (rest): 0 of 0 connections in use. You may need to increase "spare" rlm_rest (rest): Opening additional connection (5), 1 of 64 pending slots used rlm_rest (rest): Connecting to "http://127.0.0.1:7070/" rlm_rest (rest): Reserved connection (5) (0) rest: Expanding URI components (0) rest: EXPAND http://127.0.0.1:7070 (0) rest: --> http://127.0.0.1:7070 (0) rest: EXPAND //radius/rest/authorize (0) rest: --> //radius/rest/authorize (0) rest: Sending HTTP POST to "http://127.0.0.1:7070//radius/rest/authorize" (0) rest: Encoding attribute "User-Name" (0) rest: Encoding attribute "User-Password" (0) rest: Encoding attribute "NAS-IP-Address" (0) rest: Encoding attribute "Service-Type" (0) rest: Encoding attribute "Framed-Protocol" (0) rest: Encoding attribute "NAS-Identifier" (0) rest: Encoding attribute "NAS-Port-Type" (0) rest: Encoding attribute "Acct-Session-Id" (0) rest: Encoding attribute "Event-Timestamp" (0) rest: Encoding attribute "Stripped-User-Name" (0) rest: Encoding attribute "Realm" (0) rest: Encoding attribute "FreeRADIUS-Client-IP-Address" (0) rest: Processing response header (0) rest: Status : 401 (Unauthorized) (0) rest: Type : json (application/json) (0) rest: ERROR: Server returned: (0) rest: ERROR: {"Reply-Message":"PacketFence does not support this switch for read/write access login","reply:PacketFence-Authorization-Status":"allow"} rlm_rest (rest): Released connection (5) rlm_rest (rest): Need 2 more connections to reach 10 spares rlm_rest (rest): Opening additional connection (6), 1 of 63 pending slots used rlm_rest (rest): Connecting to "http://127.0.0.1:7070/" (0) [rest] = invalid (0) } # if (! EAP-Type || (EAP-Type != TTLS && EAP-Type != PEAP) ) = invalid (0) } # post-auth = invalid (0) Using Post-Auth-Type Reject (0) # Executing group from file /usr/local/pf/raddb/sites-enabled/packetfence (0) Post-Auth-Type REJECT { (0) if (! EAP-Type || (EAP-Type != TTLS && EAP-Type != PEAP) ) { (0) if (! EAP-Type || (EAP-Type != TTLS && EAP-Type != PEAP) ) -> TRUE (0) if (! EAP-Type || (EAP-Type != TTLS && EAP-Type != PEAP) ) { (0) policy packetfence-audit-log-reject { (0) if (&User-Name != "dummy") { (0) if (&User-Name != "dummy") -> TRUE (0) if (&User-Name != "dummy") { (0) policy request-timing { (0) if (control:PacketFence-Request-Time != 0) { (0) if (control:PacketFence-Request-Time != 0) -> FALSE (0) } # policy request-timing = noop (0) sql_reject: EXPAND type.reject.query (0) sql_reject: --> type.reject.query (0) sql_reject: Using query template 'query' rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 282 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 282 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 282 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 282 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (0): Hit idle_timeout, was idle for 282 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (5): Hit idle_timeout, was idle for 282 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): 0 of 0 connections in use. You may need to increase "spare" rlm_sql (sql): Opening additional connection (6), 1 of 64 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'pf' on Localhost via UNIX socket, server version 5.5.52-MariaDB, protocol version 10 rlm_sql (sql): Reserved connection (6) (0) sql_reject: EXPAND %{User-Name} (0) sql_reject: --> UserTest (0) sql_reject: SQL-User-Name set to 'UserTest' (0) sql_reject: EXPAND INSERT INTO radius_audit_log ( mac, ip, computer_name, user_name, stripped_user_name, realm, event_type, switch_id, switch_mac, switch_ip_address, radius_source_ip_address, called_station_id, calling_station_id, nas_port_type, ssid, nas_port_id, ifindex, nas_port, connection_type, nas_ip_address, nas_identifier, auth_status, reason, auth_type, eap_type, role, node_status, profile, source, auto_reg, is_phone, pf_domain, uuid, radius_request, radius_reply, request_time) VALUES ( '%{request:Calling-Station-Id}', '%{request:Framed-IP-Address}', '%{%{control:PacketFence-Computer-Name}:-N/A}', '%{request:User-Name}', '%{request:Stripped-User-Name}', '%{request:Realm}', 'Radius-Access-Request', '%{%{control:PacketFence-Switch-Id}:-N/A}', '%{%{control:PacketFence-Switch-Mac}:-N/A}', '%{%{control:PacketFence-Switch-Ip-Address}:-N/A}', '%{Packet-Src-IP-Address}', '%{request:Called-Station-Id}', '%{request:Calling-Station-Id}', '%{request:NAS-Port-Type}', '%{request:Called-Station-SSID}', '%{request:NAS-Port-Id}', '%{%{control:PacketFence-IfIndex}:-N/A}', '%{request:NAS-Port}', '%{%{control:PacketFence-Connection-Type}:-N/A}', '%{request:NAS-IP-Address}', '%{request:NAS-Identifier}', 'Reject', '%{request:Module-Failure-Message}', '%{control:Auth-Type}', '%{request:EAP-Type}', '%{%{control:PacketFence-Role}:-N/A}', '%{%{control:PacketFence-Status}:-N/A}', '%{%{control:PacketFence-Profile}:-N/A}', '%{%{control:PacketFence-Source}:-N/A}', '%{%{control:PacketFence-AutoReg}:-N/A}', '%{%{control:PacketFence-IsPhone}:-N/A}', '%{request:PacketFence-Domain}', '', '%{pairs:&request:[*]}','%{pairs:&reply:[*]}', '%{%{control:PacketFence-Request-Time}:-N/A}') (0) sql_reject: --> INSERT INTO radius_audit_log ( mac, ip, computer_name, user_name, stripped_user_name, realm, event_type, switch_id, switch_mac, switch_ip_address, radius_source_ip_address, called_station_id, calling_station_id, nas_port_type, ssid, nas_port_id, ifindex, nas_port, connection_type, nas_ip_address, nas_identifier, auth_status, reason, auth_type, eap_type, role, node_status, profile, source, auto_reg, is_phone, pf_domain, uuid, radius_request, radius_reply, request_time) VALUES ( '', '', 'N/A', 'UserTest', 'UserTest', 'null', 'Radius-Access-Request', 'N/A', 'N/A', 'N/A', '192.168.10.14', '', '', 'Ethernet', '', '', 'N/A', '', 'N/A', '192.168.10.14', 'las1.albari', 'Reject', 'rest: Server returned:', 'Accept', '', 'N/A', 'N/A', 'N/A', 'N/A', 'N/A', 'N/A', '', '', 'User-Name =3D =22UserTest=22=2C User-Password =3D =22p@55word=22=2C NAS-IP-Address =3D 192.168.10.14=2C Service-Type =3D Framed-User=2C Framed-Protocol =3D PPP=2C NAS-Identifier =3D =22las1.albari=22=2C NAS-Port-Type =3D Ethernet=2C Acct-Session-Id =3D =22las1.al00000000000000da6bb650001055=22=2C Event-Timestamp =3D =22févr. 13 2017 14:23:25 CET=22=2C Stripped-User-Name =3D =22UserTest=22=2C Realm =3D =22null=22=2C FreeRADIUS-Client-IP-Address =3D 192.168.10.14=2C Module-Failure-Message =3D =22rest: Server returned:=22=2C Module-Failure-Message =3D =22rest: =7B=5C=22Reply-Message=5C=22:=5C=22PacketFence does not support this switch for read/write access login=5C=22=2C=5C=22reply:PacketFence-Authorization-Status=5C=22:=5C=22allow=5C=22=7D=22=2C SQL-User-Name =3D =22UserTest=22','', '0') (0) sql_reject: Executing query: INSERT INTO radius_audit_log ( mac, ip, computer_name, user_name, stripped_user_name, realm, event_type, switch_id, switch_mac, switch_ip_address, radius_source_ip_address, called_station_id, calling_station_id, nas_port_type, ssid, nas_port_id, ifindex, nas_port, connection_type, nas_ip_address, nas_identifier, auth_status, reason, auth_type, eap_type, role, node_status, profile, source, auto_reg, is_phone, pf_domain, uuid, radius_request, radius_reply, request_time) VALUES ( '', '', 'N/A', 'UserTest', 'UserTest', 'null', 'Radius-Access-Request', 'N/A', 'N/A', 'N/A', '192.168.10.14', '', '', 'Ethernet', '', '', 'N/A', '', 'N/A', '192.168.10.14', 'las1.albari', 'Reject', 'rest: Server returned:', 'Accept', '', 'N/A', 'N/A', 'N/A', 'N/A', 'N/A', 'N/A', '', '', 'User-Name =3D =22UserTest=22=2C User-Password =3D =22p@55word=22=2C NAS-IP-Address =3D 192.168.10.14=2C Service-Type =3D Framed-User=2C Framed-Protocol =3D PPP=2C NAS-Identifier =3D =22las1.albari=22=2C NAS-Port-Type =3D Ethernet=2C Acct-Session-Id =3D =22las1.al00000000000000da6bb650001055=22=2C Event-Timestamp =3D =22févr. 13 2017 14:23:25 CET=22=2C Stripped-User-Name =3D =22UserTest=22=2C Realm =3D =22null=22=2C FreeRADIUS-Client-IP-Address =3D 192.168.10.14=2C Module-Failure-Message =3D =22rest: Server returned:=22=2C Module-Failure-Message =3D =22rest: =7B=5C=22Reply-Message=5C=22:=5C=22PacketFence does not support this switch for read/write access login=5C=22=2C=5C=22reply:PacketFence-Authorization-Status=5C=22:=5C=22allow=5C=22=7D=22=2C SQL-User-Name =3D =22UserTest=22','', '0') (0) sql_reject: SQL query returned: success (0) sql_reject: 1 record(s) updated rlm_sql (sql): Released connection (6) rlm_sql (sql): Need 2 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (7), 1 of 63 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'pf' on Localhost via UNIX socket, server version 5.5.52-MariaDB, protocol version 10 (0) [sql_reject] = ok (0) } # if (&User-Name != "dummy") = ok (0) } # policy packetfence-audit-log-reject = ok (0) } # if (! EAP-Type || (EAP-Type != TTLS && EAP-Type != PEAP) ) = ok (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> UserTest (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) attr_filter.packetfence_post_auth: EXPAND %{User-Name} (0) attr_filter.packetfence_post_auth: --> UserTest (0) attr_filter.packetfence_post_auth: Matched entry DEFAULT at line 10 (0) [attr_filter.packetfence_post_auth] = updated (0) [eap] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) linelog: EXPAND messages.%{%{reply:Packet-Type}:-default} (0) linelog: --> messages.Access-Accept (0) linelog: EXPAND %t : [mac:%{Calling-Station-Id}] Accepted user: %{reply:User-Name} and returned VLAN %{reply:Tunnel-Private-Group-ID} (0) linelog: --> Mon Feb 13 14:23:25 2017 : [mac:] Accepted user: and returned VLAN (0) linelog: EXPAND /usr/local/pf/logs/radius.log (0) linelog: --> /usr/local/pf/logs/radius.log (0) [linelog] = ok (0) } # Post-Auth-Type REJECT = updated (0) Rejected in post-auth: [UserTest] (from client 192.168.10.0/24 port 0) (0) Delaying response for 1.000000 seconds Waking up in 0.1 seconds. Waking up in 0.8 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 10 from 192.168.10.22:1812 to 192.168.10.14:1812 length 20 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 10 with timestamp +282 Ready to process requests Thanks for ur help Best regards

2 2

passwd and unlang
by macservo 13 Feb '17

13 Feb '17

Am I missing something here or have there been changes to the behavior of passwd and unlang since 2.0.2? If you could please have a look at the configuration (migrated from 2.0.2, where it was working) and output below. The username for the request is Mac284-1. This username is NOT in the passwd-file, which explains the "Failed retrieving values required to evaluate condition" part. But then why is notfound -> FALSE? Should´nt notfound be true and the request thus be rejected? /etc/raddb/sites-enabled/default: authorize { ... maclist if (notfound) { reject } if ( mac-add !~ /%{Calling-Station-ID}/i) { reject } ... } /etc/raddb/mods-available/passwd: passwd maclist { filename = /etc/raddb/maclist format = "*User-Name:~mac-add" } /etc/raddb/maclist: Macxxx:00236C94ED49 And the output: Fri Feb 10 19:10:31 2017 : Debug: (5) suffix: No '@' in User-Name = "Mac284-1", looking up realm NULL Fri Feb 10 19:10:31 2017 : Debug: (5) suffix: No such realm "NULL" Fri Feb 10 19:10:31 2017 : Debug: (5) modsingle[authorize]: returned from suffix (rlm_realm) Fri Feb 10 19:10:31 2017 : Debug: (5) [suffix] = noop Fri Feb 10 19:10:31 2017 : Debug: (5) if (Called-Station-ID =~ /:test$/) { Fri Feb 10 19:10:31 2017 : Debug: No matches Fri Feb 10 19:10:31 2017 : Debug: Adding 1 matches Fri Feb 10 19:10:31 2017 : Debug: (5) if (Called-Station-ID =~ /:test$/) -> TRUE Fri Feb 10 19:10:31 2017 : Debug: (5) if (Called-Station-ID =~ /:test$/) { Fri Feb 10 19:10:31 2017 : Debug: (5) modsingle[authorize]: calling eap (rlm_eap) Fri Feb 10 19:10:31 2017 : Debug: (5) eap: Peer sent EAP Response (code 2) ID 6 length 1276 Fri Feb 10 19:10:31 2017 : Debug: (5) eap: No EAP Start, assuming it's an on-going EAP conversation Fri Feb 10 19:10:31 2017 : Debug: (5) modsingle[authorize]: returned from eap (rlm_eap) Fri Feb 10 19:10:31 2017 : Debug: (5) [eap] = updated Fri Feb 10 19:10:31 2017 : Debug: (5) modsingle[authorize]: calling files (rlm_files) Fri Feb 10 19:10:31 2017 : Debug: (5) modsingle[authorize]: returned from files (rlm_files) Fri Feb 10 19:10:31 2017 : Debug: (5) [files] = noop Fri Feb 10 19:10:31 2017 : Debug: (5) modsingle[authorize]: calling maclist (rlm_passwd) Fri Feb 10 19:10:31 2017 : Debug: (5) modsingle[authorize]: returned from maclist (rlm_passwd) Fri Feb 10 19:10:31 2017 : Debug: (5) [maclist] = ok Fri Feb 10 19:10:31 2017 : Debug: (5) if (notfound) { Fri Feb 10 19:10:31 2017 : Debug: (5) if (notfound) -> FALSE Fri Feb 10 19:10:31 2017 : Debug: (5) if ( mac-add !~ /%{Calling-Station-ID}/i) { Fri Feb 10 19:10:31 2017 : ERROR: (5) Failed retrieving values required to evaluate condition

2 3

freeRadius dynamic vlan unifi AP
by Jan-Christoph Fuchs 12 Feb '17

12 Feb '17

Hi Forum, i have setup a freeradius server with MySQL for Dynamic VLAN assignment. Everything works fine with TP-Link AP running openWRT. Now I have changed to Unifi AP (Unifi Security Gateway Pro, Unifi Switch US-24 POE Unifi AP Pro) and the dynamic VLAN assignment will not work anymore. When I try to connect to the WPA2 Enterprise WLAN, credentials are accepted but I always been put to default VLAN. I googled around and found the Link, but I had no success anyway. http://freeradius.1045715.n5.nabble.com/Freeradius-and-Unifi-Vlan-td5743402… <http://freeradius.1045715.n5.nabble.com/Freeradius-and-Unifi-Vlan-td5743402…> Anyone has any ideas to help me please? Which further information do you need? I have a full freeradius -X Thanks Foxy freeradius debug: rad_recv: Access-Request packet from host 10.4.0.3 port 58475, id=0, length=162 User-Name = "vlan2" NAS-Identifier = "802aa8c9b930" NAS-Port = 0 Called-Station-Id = "80-2A-A8-CA-B9-30:test-radius" Calling-Station-Id = "44-00-10-57-E4-82" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x0267000a01766c616e32 Message-Authenticator = 0x06d999db3a89921c59829a06fc6a668c # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "vlan2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 103 length 10 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated ++[files] = noop [sql] expand: %{User-Name} -> vlan2 [sql] sql_set_user escaped user --> 'vlan2' rlm_sql (sql): Reserving sql socket id: 31 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'vlan2' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'vlan2' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'vlan2' ORDER BY priority [sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'vlan2' ORDER BY id [sql] User found in group vlan2 [sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'vlan2' ORDER BY id rlm_sql (sql): Released sql socket id: 31 ++[sql] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 0 to 10.4.0.3 port 58475 Tunnel-Type:0 := VLAN Tunnel-Medium-Type:0 := IEEE-802 Tunnel-Private-Group-Id:0 := "2" EAP-Message = 0x016800160410d4aaf5baf1249b0b9757e28baaeaaa5f Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5bbe2fd05bd62b4f6758a6e7768e6c4f Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.4.0.3 port 58475, id=1, length=178 User-Name = "vlan2" NAS-Identifier = "802aa8c9b930" NAS-Port = 0 Called-Station-Id = "80-2A-A8-CA-B9-30:test-radius" Calling-Station-Id = "44-00-10-57-E4-82" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x026800080319152b State = 0x5bbe2fd05bd62b4f6758a6e7768e6c4f Message-Authenticator = 0x832e2a49ed7f71a89ddd64c031384e96 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "vlan2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 104 length 8 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated ++[files] = noop [sql] expand: %{User-Name} -> vlan2 [sql] sql_set_user escaped user --> 'vlan2' rlm_sql (sql): Reserving sql socket id: 30 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'vlan2' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'vlan2' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'vlan2' ORDER BY priority [sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'vlan2' ORDER BY id [sql] User found in group vlan2 [sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'vlan2' ORDER BY id rlm_sql (sql): Released sql socket id: 30 ++[sql] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 1 to 10.4.0.3 port 58475 Tunnel-Type:0 := VLAN Tunnel-Medium-Type:0 := IEEE-802 Tunnel-Private-Group-Id:0 := "2" EAP-Message = 0x016900061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5bbe2fd05ad7364f6758a6e7768e6c4f Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.4.0.3 port 58475, id=2, length=297 User-Name = "vlan2" NAS-Identifier = "802aa8c9b930" NAS-Port = 0 Called-Station-Id = "80-2A-A8-CA-B9-30:test-radius" Calling-Station-Id = "44-00-10-57-E4-82" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x0269007f19800000007516030100700100006c0301589ed44589c48a46cf539f29ccb55919d495885606f29ed44e2a6c29bd86d9eb00002000ffc024c023c00ac009c008c028c027c014c013c012003d003c0035002f000a01000023000a00080006001700180019000b000201000005000501000000000012000000170000 State = 0x5bbe2fd05ad7364f6758a6e7768e6c4f Message-Authenticator = 0x36c578d87de859f5bb186da5d12f866d # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "vlan2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 105 length 127 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 117 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0070], ClientHello [peap] TLS_accept: unknown state [peap] >>> TLS 1.0 Handshake [length 0039], ServerHello [peap] TLS_accept: unknown state [peap] >>> TLS 1.0 Handshake [length 02ca], Certificate [peap] TLS_accept: unknown state [peap] >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange [peap] TLS_accept: unknown state [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: unknown state [peap] TLS_accept: unknown state [peap] TLS_accept: Need to read more data: unknown state In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 2 to 10.4.0.3 port 58475 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x0603551d1304023000300d06092a864886f70d01010b0500038201010059f5ccb527a5c95bd585d481cf2c0d940a2100bfe19c781f8fc6c9fe6ecf9581cc11899915a4a4a76f93ce5d9a27a1377e9f5b595d0c91b85158b46264b6bbf53d663f5972a29bb9ee27f94fa19c0e10cb315bbfff1a0b9dada6af7b44055bde3a97fce3d03d0e3d9dd2ca98d02899654c38e978067be45716b8095b7eec985ed5766a840d768fde1384f8d70c2b2b62f3bf1ce577e8c7e55870217ef8101973e33c417108d7645823438b1b637bf66d11755e23ccceabf7256480a3ce55f410d5479aa862e7cd048a3661213131c38bdcfae6a8223dbc92e680e4e8feee2c86 EAP-Message = 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 EAP-Message = 0xc33825db86cc5193821c21c0 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5bbe2fd059d4364f6758a6e7768e6c4f Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.4.0.3 port 58475, id=3, length=176 User-Name = "vlan2" NAS-Identifier = "802aa8c9b930" NAS-Port = 0 Called-Station-Id = "80-2A-A8-CA-B9-30:test-radius" Calling-Station-Id = "44-00-10-57-E4-82" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x026a00061900 State = 0x5bbe2fd059d4364f6758a6e7768e6c4f Message-Authenticator = 0x99a1d9d626da9befea61798a088dcaa5 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "vlan2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 106 length 6 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 3 to 10.4.0.3 port 58475 EAP-Message = 0x016b0076190084b8ddc47f9ae932aad390c476d83be799f4a0573ba9ffc44bb7ab4acd2aee1bf8c481909e6fb235ad5904953e0da13f76cab712d08f270272699821617e7c9bbbf02fe16724e3e118fb1544a1425a42b33d7627f1ac1a3ab6b40de72becd841b631813edf992c16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5bbe2fd058d5364f6758a6e7768e6c4f Finished request 3. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 10.4.0.3 port 58475, id=4, length=314 User-Name = "vlan2" NAS-Identifier = "802aa8c9b930" NAS-Port = 0 Called-Station-Id = "80-2A-A8-CA-B9-30:test-radius" Calling-Station-Id = "44-00-10-57-E4-82" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x026b0090198000000086160301004610000042410492699d0b4133e01f3077df1dd32450bb838549add65693b94f1403cc929899231cbad80effab16998dbc60b8de0238ddbe8fefdbbe3e770c3f662d37b37371771403010001011603010030164a6ac78696439e80a7b6e06d205e5a2a6b9a90d8531892b0a24de189284588156554a2a15cbbcb8cc0e9e8f87810c8 State = 0x5bbe2fd058d5364f6758a6e7768e6c4f Message-Authenticator = 0xbd183035d6eb70e1cf4df33759a104a0 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "vlan2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 107 length 144 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 134 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange [peap] TLS_accept: unknown state [peap] TLS_accept: unknown state [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: unknown state [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: unknown state [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: unknown state [peap] TLS_accept: unknown state [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 4 to 10.4.0.3 port 58475 EAP-Message = 0x016c0041190014030100010116030100302db38c5a4a30e8a20e40e33ea5c90ffc4390aa26733fa055d9e44df2df3fe2efec91ee64752fbaa81952491f4de66b73 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5bbe2fd05fd2364f6758a6e7768e6c4f Finished request 4. Going to the next request Waking up in 2.2 seconds. rad_recv: Access-Request packet from host 10.4.0.3 port 58475, id=5, length=176 User-Name = "vlan2" NAS-Identifier = "802aa8c9b930" NAS-Port = 0 Called-Station-Id = "80-2A-A8-CA-B9-30:test-radius" Calling-Station-Id = "44-00-10-57-E4-82" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x026c00061900 State = 0x5bbe2fd05fd2364f6758a6e7768e6c4f Message-Authenticator = 0xfe48702c915ce42bd6857c1c98c2ad33 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "vlan2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 108 length 6 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 5 to 10.4.0.3 port 58475 EAP-Message = 0x016d002b19001703010020720525055a03208c8942699fac52371c34564e69c8ad2dca9670eb2ad7d7990b Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5bbe2fd05ed3364f6758a6e7768e6c4f Finished request 5. Going to the next request Waking up in 2.2 seconds. rad_recv: Access-Request packet from host 10.4.0.3 port 58475, id=6, length=213 User-Name = "vlan2" NAS-Identifier = "802aa8c9b930" NAS-Port = 0 Called-Station-Id = "80-2A-A8-CA-B9-30:test-radius" Calling-Station-Id = "44-00-10-57-E4-82" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x026d002b1900170301002047bc3b02b2b161c69c407fcc9499570fc44846071487cddd3238a74a6f1b5486 State = 0x5bbe2fd05ed3364f6758a6e7768e6c4f Message-Authenticator = 0x3043fa8c67010675ab157c9b041ec8e0 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "vlan2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 109 length 43 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - vlan2 [peap] Got inner identity 'vlan2' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x026d000a01766c616e32 server { [peap] Setting User-Name to vlan2 Sending tunneled request EAP-Message = 0x026d000a01766c616e32 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "vlan2" NAS-Identifier = "802aa8c9b930" NAS-Port = 0 Called-Station-Id = "80-2A-A8-CA-B9-30:test-radius" Calling-Station-Id = "44-00-10-57-E4-82" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" NAS-IP-Address = 10.4.0.3 server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +group authorize { ++[chap] = noop ++[mschap] = noop [suffix] No '@' in User-Name = "vlan2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop ++update control { ++} # update control = noop [eap] EAP packet type response id 109 length 10 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated ++[files] = noop [sql] expand: %{User-Name} -> vlan2 [sql] sql_set_user escaped user --> 'vlan2' rlm_sql (sql): Reserving sql socket id: 29 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'vlan2' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'vlan2' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'vlan2' ORDER BY priority [sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'vlan2' ORDER BY id [sql] User found in group vlan2 [sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'vlan2' ORDER BY id rlm_sql (sql): Released sql socket id: 29 ++[sql] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +group authenticate { [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] = handled +} # group authenticate = handled } # server inner-tunnel [peap] Got tunneled reply code 11 Tunnel-Type:0 := VLAN Tunnel-Medium-Type:0 := IEEE-802 Tunnel-Private-Group-Id:0 := "2" EAP-Message = 0x016e001f1a016e001a10e77e02f329ceda823151bee45600a691766c616e32 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbf69de36bf07c49c7fdd6a5522e854fb [peap] Got tunneled reply RADIUS code 11 Tunnel-Type:0 := VLAN Tunnel-Medium-Type:0 := IEEE-802 Tunnel-Private-Group-Id:0 := "2" EAP-Message = 0x016e001f1a016e001a10e77e02f329ceda823151bee45600a691766c616e32 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbf69de36bf07c49c7fdd6a5522e854fb [peap] Got tunneled Access-Challenge ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 6 to 10.4.0.3 port 58475 EAP-Message = 0x016e003b19001703010030273a2344da33da6bd4f07a68939b2d6fe8f074d5c8fc5d3bd995b603066ecf0ebadaa7b9c6bb0857de06eb1732da1372 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5bbe2fd05dd0364f6758a6e7768e6c4f Finished request 6. Going to the next request Waking up in 2.2 seconds. rad_recv: Access-Request packet from host 10.4.0.3 port 58475, id=7, length=277 User-Name = "vlan2" NAS-Identifier = "802aa8c9b930" NAS-Port = 0 Called-Station-Id = "80-2A-A8-CA-B9-30:test-radius" Calling-Station-Id = "44-00-10-57-E4-82" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x026e006b190017030100609d599b8771f229409a0c80966b2d47df23ee2d458e0aa22554971c8dcbff5c8d6fd24841ac1f33f77b523ad33f435410bd3b5061388f389cf35852f2bbe989d6e79c80c01fa06efa1ac48960c28057604e2d52eaf27fcb9592b15bd81b9d9352 State = 0x5bbe2fd05dd0364f6758a6e7768e6c4f Message-Authenticator = 0x49a65641575dbc71665aa3a24ed858d4 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "vlan2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 110 length 107 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x026e00401a026e003b315e0f62a689f025e1df998ee87babf9de00000000000000007564685ceec9262c6ebfe53b4108d24ae06e720a0fe08a6c00766c616e32 server { [peap] Setting User-Name to vlan2 Sending tunneled request EAP-Message = 0x026e00401a026e003b315e0f62a689f025e1df998ee87babf9de00000000000000007564685ceec9262c6ebfe53b4108d24ae06e720a0fe08a6c00766c616e32 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "vlan2" State = 0xbf69de36bf07c49c7fdd6a5522e854fb NAS-Identifier = "802aa8c9b930" NAS-Port = 0 Called-Station-Id = "80-2A-A8-CA-B9-30:test-radius" Calling-Station-Id = "44-00-10-57-E4-82" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" NAS-IP-Address = 10.4.0.3 server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +group authorize { ++[chap] = noop ++[mschap] = noop [suffix] No '@' in User-Name = "vlan2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop ++update control { ++} # update control = noop [eap] EAP packet type response id 110 length 64 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated ++[files] = noop [sql] expand: %{User-Name} -> vlan2 [sql] sql_set_user escaped user --> 'vlan2' rlm_sql (sql): Reserving sql socket id: 28 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'vlan2' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'vlan2' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'vlan2' ORDER BY priority [sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'vlan2' ORDER BY id [sql] User found in group vlan2 [sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'vlan2' ORDER BY id rlm_sql (sql): Released sql socket id: 28 ++[sql] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +group authenticate { [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel [mschapv2] +group MS-CHAP { [mschap] Creating challenge hash with username: vlan2 [mschap] Client is using MS-CHAPv2 for vlan2, we need NT-Password ++[mschap] = ok +} # group MS-CHAP = ok MSCHAP Success ++[eap] = handled +} # group authenticate = handled } # server inner-tunnel [peap] Got tunneled reply code 11 Tunnel-Type:0 := VLAN Tunnel-Medium-Type:0 := IEEE-802 Tunnel-Private-Group-Id:0 := "2" EAP-Message = 0x016f00331a036e002e533d41463237344142313833423934363930354534383236463136343338333230333744323432413432 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbf69de36be06c49c7fdd6a5522e854fb [peap] Got tunneled reply RADIUS code 11 Tunnel-Type:0 := VLAN Tunnel-Medium-Type:0 := IEEE-802 Tunnel-Private-Group-Id:0 := "2" EAP-Message = 0x016f00331a036e002e533d41463237344142313833423934363930354534383236463136343338333230333744323432413432 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbf69de36be06c49c7fdd6a5522e854fb [peap] Got tunneled Access-Challenge ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 7 to 10.4.0.3 port 58475 EAP-Message = 0x016f005b19001703010050379671a1652397822077c4939f603c0697b5ad4acda69af23684b69747b835bc2eee51061ba9de8736ee1a212c16986b4976389fe0080d8f0d71a892795b124f8bcb4cf473180414321ba05012d9c804 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5bbe2fd05cd1364f6758a6e7768e6c4f Finished request 7. Going to the next request Waking up in 2.1 seconds. rad_recv: Access-Request packet from host 10.4.0.3 port 58475, id=8, length=213 User-Name = "vlan2" NAS-Identifier = "802aa8c9b930" NAS-Port = 0 Called-Station-Id = "80-2A-A8-CA-B9-30:test-radius" Calling-Station-Id = "44-00-10-57-E4-82" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x026f002b190017030100204e389e032c31ad1db1e6708b6e4b9d959b44e97a2133228df869f8852f589e6b State = 0x5bbe2fd05cd1364f6758a6e7768e6c4f Message-Authenticator = 0x931630aa75d0a3402894d50d928802c2 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "vlan2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 111 length 43 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x026f00061a03 server { [peap] Setting User-Name to vlan2 Sending tunneled request EAP-Message = 0x026f00061a03 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "vlan2" State = 0xbf69de36be06c49c7fdd6a5522e854fb NAS-Identifier = "802aa8c9b930" NAS-Port = 0 Called-Station-Id = "80-2A-A8-CA-B9-30:test-radius" Calling-Station-Id = "44-00-10-57-E4-82" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" NAS-IP-Address = 10.4.0.3 server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +group authorize { ++[chap] = noop ++[mschap] = noop [suffix] No '@' in User-Name = "vlan2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop ++update control { ++} # update control = noop [eap] EAP packet type response id 111 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated ++[files] = noop [sql] expand: %{User-Name} -> vlan2 [sql] sql_set_user escaped user --> 'vlan2' rlm_sql (sql): Reserving sql socket id: 27 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'vlan2' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'vlan2' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'vlan2' ORDER BY priority [sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'vlan2' ORDER BY id [sql] User found in group vlan2 [sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'vlan2' ORDER BY id rlm_sql (sql): Released sql socket id: 27 ++[sql] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +group authenticate { [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [eap] Freeing handler ++[eap] = ok +} # group authenticate = ok WARNING: Empty post-auth section. Using default return values. # Executing section post-auth from file /etc/freeradius/sites-enabled/inner-tunnel } # server inner-tunnel [peap] Got tunneled reply code 2 Tunnel-Type:0 := VLAN Tunnel-Medium-Type:0 := IEEE-802 Tunnel-Private-Group-Id:0 := "2" EAP-Message = 0x036f0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "vlan2" [peap] Got tunneled reply RADIUS code 2 Tunnel-Type:0 := VLAN Tunnel-Medium-Type:0 := IEEE-802 Tunnel-Private-Group-Id:0 := "2" EAP-Message = 0x036f0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "vlan2" [peap] Tunneled authentication was successful. [peap] SUCCESS [peap] Saving tunneled attributes for later ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 8 to 10.4.0.3 port 58475 EAP-Message = 0x0170002b1900170301002016ca7fa553aa22f428b1cc092d8c0edce568f4304d792dc1e4f3ee96aee7dbf4 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5bbe2fd053ce364f6758a6e7768e6c4f Finished request 8. Going to the next request Waking up in 2.0 seconds. rad_recv: Access-Request packet from host 10.4.0.3 port 58475, id=9, length=213 User-Name = "vlan2" NAS-Identifier = "802aa8c9b930" NAS-Port = 0 Called-Station-Id = "80-2A-A8-CA-B9-30:test-radius" Calling-Station-Id = "44-00-10-57-E4-82" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x0270002b19001703010020f1fad92ca1690eeab1fd596f4e05814f52fe6ca28544b4fa55eee6ea9709ba21 State = 0x5bbe2fd053ce364f6758a6e7768e6c4f Message-Authenticator = 0xdb9f0883a110094183004dd28a6f5261 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "vlan2", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 112 length 43 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv success [peap] Received EAP-TLV response. [peap] Success [peap] Using saved attributes from the original Access-Accept Tunnel-Type:0 := VLAN Tunnel-Medium-Type:0 := IEEE-802 Tunnel-Private-Group-Id:0 := "2" User-Name = "vlan2" [eap] Freeing handler ++[eap] = ok +} # group authenticate = ok # Executing section post-auth from file /etc/freeradius/sites-enabled/default +group post-auth { [sql] expand: %{User-Name} -> vlan2 [sql] sql_set_user escaped user --> 'vlan2' [sql] expand: %{User-Password} -> [sql] ... expanding second conditional [sql] expand: %{Chap-Password} -> [sql] expand: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') -> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'vlan2', '', 'Access-Accept', '2017-02-11 09:54:40') rlm_sql (sql) in sql_postauth: query is INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'vlan2', '', 'Access-Accept', '2017-02-11 09:54:40') rlm_sql (sql): Reserving sql socket id: 26 rlm_sql (sql): Released sql socket id: 26 ++[sql] = ok ++[exec] = noop +} # group post-auth = ok Sending Access-Accept of id 9 to 10.4.0.3 port 58475 Tunnel-Type:0 := VLAN Tunnel-Medium-Type:0 := IEEE-802 Tunnel-Private-Group-Id:0 := "2" User-Name = "vlan2" MS-MPPE-Recv-Key = 0xc42271ac1c9ce5bd6fd9be65a9eaf0b2c9512de5a0561888d8c4443a42a3ea0e MS-MPPE-Send-Key = 0xe57e91b287bd2e2d536e08176c9a61fdaa9ae60687e59db5310af032b8c3e430 EAP-Message = 0x03700004 Message-Authenticator = 0x00000000000000000000000000000000 Finished request 9. Going to the next request Waking up in 2.0 seconds. Cleaning up request 0 ID 0 with timestamp +47 Cleaning up request 1 ID 1 with timestamp +47 Cleaning up request 2 ID 2 with timestamp +47 Cleaning up request 3 ID 3 with timestamp +47 Waking up in 2.6 seconds. Cleaning up request 4 ID 4 with timestamp +49 Cleaning up request 5 ID 5 with timestamp +49 Cleaning up request 6 ID 6 with timestamp +49 Cleaning up request 7 ID 7 with timestamp +49 Cleaning up request 8 ID 8 with timestamp +50 Cleaning up request 9 ID 9 with timestamp +50 Ready to process requests.

2 4

The "simul_check" Query
by Selahattin Cilek 10 Feb '17

10 Feb '17

Hello. At what stage of AAA does FreeRADIUS send the SQL server the 'simul_check' and the 'simul_verify' queries? What other information than the "Username" can I send to a custom query at this stage? Best regards. Selahattin CILEK

5 7

framed-ipv6-address aware queries.conf file for FR 3.0.13
by Alex Sharaz 10 Feb '17

10 Feb '17

I've just set up a test wireless network that assigns users IPv6 addresses. From an Airheads page I found the following re IPv6 accounting :- ============== Pre 6.5, we can only perform authentication/authorization of IPv6 clients. Starting Aruba OS 6.5, we have the capability to monitor the bandwidth usage of the clients with IPv6 addresses. * We are following RFC 6911 which defines the attributes to be used for IPv6 access networks. * The *Framed-IPv6-Address* is the key attribute and will be used in accounting start, stop and interim packets. * With IPv6 implementation, it is possible for a single host to have multiple IPv6 addresses. * We now have ability to track the usage of each and every IPv6 entry. A host can have both IPv4 andIPv6 addresses. Following behavior is expected in the mentioned scenarios- *With one IPv6 address:* Start, stop and interim update messages are sent for the only IPv6 address. *With one each IPv4 and IPv6 address:* Start, stop and interim update messages are sent for both IPv4 and IPv6 address. *With multiple IPv6 address:* Start, stop and interim update messages are sent for each of the IPv6 addresses. *With multiple IPv6 and multiple IPv4 address:* Start, stop and interim update messages are sent for each of the IPv6 addresses. Start message is sent only for the first IPv4 address. Interim updates are sent for all the IPv4 addresses. •Stop message is sent only for the last IPv4 entry. ======= however looking at both queries.conf and schema.conf , there doesn't seem to be any reference to supporting IPv6 addresses via the Framd-ipv6-address attribute. Tried looking at the FR v4 source for queries.conf and schema.conf on github and there's no reference to Framed-IPv6-Adddress there either. Is this something I've got to roll out myself? Rgds Alex

2 1

passwd and unlang
by macservo 10 Feb '17

10 Feb '17

Hello, I´m trying to migrate an old installation of freeradius to a more recent system. Old version is 2.0.2 Target system is running CentOS 7 and the packaged version of freeradius, which is 3.0.4 The setup on the old server is using the passwd-module and unlang to bind the username (which comes from a certificate) to a mac-address and checks the validity of the username. MAC-address is added to request. /etc/raddb/mods-enabled/passwd: passwd maclist { filename = /etc/raddb/maclist format = "*User-Name:~mac-add" } /etc/raddb/sites-enabled/default: ... authorize { ... maclist if (notfound) { reject } if ( mac-add !~ /%{Calling-Station-ID}/i) { reject } ... /etc/raddb/dictionary: ATTRIBUTE mac-add 3005 string On access-request I´ll get the following error, and the check is not working: (1) [maclist] = ok (1) if (notfound) (1) if (notfound) -> FALSE (1) if ( mac-add !~ /%{Calling-Station-ID}/i) (1) EXPAND %{Calling-Station-ID} (1) --> 00236c94ed49 (1) ERROR: Failed retrieving values required to evaluate condition What am I doing wrong? Full debug and connection log below. Thank you very much. [root@radrad raddb]# radiusd -X radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, built on Mar 5 2015 at 23:41:36 Copyright (C) 1999-2014 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/www/path/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client 192.168.2.42 { require_message_authenticator = no secret = <<< secret >>> shortname = "cisco-wlc" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 192.168.2.42. Please fix your configuration Support for old-style clients will be removed in a future release client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } radiusd: #### Instantiating modules #### instantiate { } modules { # Loaded module rlm_always # Instantiating module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Instantiating module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Instantiating module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Instantiating module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Instantiating module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Instantiating module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Loaded module rlm_cache # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 16384 epoch = 0 add_stats = no } # Loaded module rlm_chap # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_detail # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Loaded module rlm_dhcp # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no mod_accounting_username_bug = no max_sessions = 1024 } # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = yes } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_method = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Loaded module rlm_exec # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } # Loaded module rlm_files # Instantiating module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" usersfile = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" compat = "cistron" } reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Loaded module rlm_linelog # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{Packet-Type}:-default}" } # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Instantiating module "maclist" from file /etc/raddb/mods-enabled/passwd passwd maclist { filename = "/etc/raddb/maclist" format = "*User-Name:~mac-add" delimiter = ":" ignore_nislike = yes ignore_empty = yes allow_multiple_keys = no hash_size = 100 } rlm_passwd: nfields: 2 keyfield 0(User-Name) listable: no # Loaded module rlm_preprocess # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Loaded module rlm_radutmp # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } # Loaded module rlm_unpack # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8 } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Creating Auth-Type = digest # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 as server default Listening on acct address * port 1813 as server default Listening on auth address :: port 1812 as server default Listening on acct address :: port 1813 as server default Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel Opening new proxy socket 'proxy address * port 0' Listening on proxy address * port 44568 Ready to process requests Received Access-Request Id 16 from 192.168.2.42:32769 to 10.1.2.27:1812 length 241 User-Name = 'Mac284-1' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '00236c94ed49' Called-Station-Id = '34a84edc9b40:test' NAS-Port = 1 Cisco-AVPair = 'audit-session-id=c0a8022a0006da17589c709a' Acct-Session-Id = '589c709a/00:23:6c:94:ed:49/89377' NAS-IP-Address = 192.168.2.42 NAS-Identifier = 'cisco-wlc' Airespace-Wlan-Id = 6 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201000d014d61633238342d31 Message-Authenticator = 0x1ab41330ba943539bcc92c8db9966a0f (0) Received Access-Request packet from host 192.168.2.42 port 32769, id=16, length=241 (0) User-Name = 'Mac284-1' (0) Chargeable-User-Identity = 0x00 (0) Location-Capable = Civix-Location (0) Calling-Station-Id = '00236c94ed49' (0) Called-Station-Id = '34a84edc9b40:test' (0) NAS-Port = 1 (0) Cisco-AVPair = 'audit-session-id=c0a8022a0006da17589c709a' (0) Acct-Session-Id = '589c709a/00:23:6c:94:ed:49/89377' (0) NAS-IP-Address = 192.168.2.42 (0) NAS-Identifier = 'cisco-wlc' (0) Airespace-Wlan-Id = 6 (0) Service-Type = Framed-User (0) Framed-MTU = 1300 (0) NAS-Port-Type = Wireless-802.11 (0) EAP-Message = 0x0201000d014d61633238342d31 (0) Message-Authenticator = 0x1ab41330ba943539bcc92c8db9966a0f (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) filter_username filter_username { (0) if (!&User-Name) (0) if (!&User-Name) -> FALSE (0) if (&User-Name =~ / /) (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@.*@/ ) (0) if (&User-Name =~ /@.*@/ ) -> FALSE (0) if (&User-Name =~ /\\.\\./ ) (0) if (&User-Name =~ /\\.\\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\\.$/) (0) if (&User-Name =~ /\\.$/) -> FALSE (0) if (&User-Name =~ /(a)\\./) (0) if (&User-Name =~ /(a)\\./) -> FALSE (0) } # filter_username filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix : Checking for suffix after "@" (0) suffix : No '@' in User-Name = "Mac284-1", looking up realm NULL (0) suffix : No such realm "NULL" (0) [suffix] = noop (0) if (Called-Station-ID =~ /:test$/) (0) if (Called-Station-ID =~ /:test$/) -> TRUE (0) if (Called-Station-ID =~ /:test$/) { (0) eap : Peer sent code Response (2) ID 1 length 13 (0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # if (Called-Station-ID =~ /:test$/) = ok (0) [files] = noop (0) [expiration] = noop (0) [logintime] = noop (0) WARNING: pap : No "known good" password found for the user. Not setting Auth-Type (0) WARNING: pap : Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) Found Auth-Type = EAP (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap : Peer sent method Identity (1) (0) eap : Calling eap_md5 to process EAP data (0) eap_md5 : Issuing MD5 Challenge (0) eap : New EAP session, adding 'State' attribute to reply 0x3286ec463284e8a3 (0) [eap] = handled (0) } # authenticate = handled (0) Sending Access-Challenge packet to host 192.168.2.42 port 32769, id=16, length=0 (0) EAP-Message = 0x01020016041022c02db351bae08c46ab81cb684e2bc8 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x3286ec463284e8a3af3e7e5c1128d5dc Sending Access-Challenge Id 16 from 10.1.2.27:1812 to 192.168.2.42:32769 EAP-Message = 0x01020016041022c02db351bae08c46ab81cb684e2bc8 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3286ec463284e8a3af3e7e5c1128d5dc (0) Finished request Waking up in 0.3 seconds. Received Access-Request Id 17 from 192.168.2.42:32769 to 10.1.2.27:1812 length 252 User-Name = 'Mac284-1' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '00236c94ed49' Called-Station-Id = '34a84edc9b40:test' NAS-Port = 1 Cisco-AVPair = 'audit-session-id=c0a8022a0006da17589c709a' Acct-Session-Id = '589c709a/00:23:6c:94:ed:49/89377' NAS-IP-Address = 192.168.2.42 NAS-Identifier = 'cisco-wlc' Airespace-Wlan-Id = 6 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x02020006030d State = 0x3286ec463284e8a3af3e7e5c1128d5dc Message-Authenticator = 0x3951d3d7ec148c5021d91af9b33ae8f4 (1) Received Access-Request packet from host 192.168.2.42 port 32769, id=17, length=252 (1) User-Name = 'Mac284-1' (1) Chargeable-User-Identity = 0x00 (1) Location-Capable = Civix-Location (1) Calling-Station-Id = '00236c94ed49' (1) Called-Station-Id = '34a84edc9b40:test' (1) NAS-Port = 1 (1) Cisco-AVPair = 'audit-session-id=c0a8022a0006da17589c709a' (1) Acct-Session-Id = '589c709a/00:23:6c:94:ed:49/89377' (1) NAS-IP-Address = 192.168.2.42 (1) NAS-Identifier = 'cisco-wlc' (1) Airespace-Wlan-Id = 6 (1) Service-Type = Framed-User (1) Framed-MTU = 1300 (1) NAS-Port-Type = Wireless-802.11 (1) EAP-Message = 0x02020006030d (1) State = 0x3286ec463284e8a3af3e7e5c1128d5dc (1) Message-Authenticator = 0x3951d3d7ec148c5021d91af9b33ae8f4 (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) filter_username filter_username { (1) if (!&User-Name) (1) if (!&User-Name) -> FALSE (1) if (&User-Name =~ / /) (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@.*@/ ) (1) if (&User-Name =~ /@.*@/ ) -> FALSE (1) if (&User-Name =~ /\\.\\./ ) (1) if (&User-Name =~ /\\.\\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\\.$/) (1) if (&User-Name =~ /\\.$/) -> FALSE (1) if (&User-Name =~ /(a)\\./) (1) if (&User-Name =~ /(a)\\./) -> FALSE (1) } # filter_username filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix : Checking for suffix after "@" (1) suffix : No '@' in User-Name = "Mac284-1", looking up realm NULL (1) suffix : No such realm "NULL" (1) [suffix] = noop (1) if (Called-Station-ID =~ /:test$/) (1) if (Called-Station-ID =~ /:test$/) -> TRUE (1) if (Called-Station-ID =~ /:test$/) { (1) eap : Peer sent code Response (2) ID 2 length 6 (1) eap : No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop (1) [maclist] = ok (1) if (notfound) (1) if (notfound) -> FALSE (1) if ( mac-add !~ /%{Calling-Station-ID}/i) (1) EXPAND %{Calling-Station-ID} (1) --> 00236c94ed49 (1) ERROR: Failed retrieving values required to evaluate condition (1) } # if (Called-Station-ID =~ /:test$/) = updated (1) [files] = noop (1) [expiration] = noop (1) [logintime] = noop (1) WARNING: pap : No "known good" password found for the user. Not setting Auth-Type (1) WARNING: pap : Authentication will fail unless a "known good" password is available (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = EAP (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap : Expiring EAP session with state 0x3286ec463284e8a3 (1) eap : Finished EAP session with state 0x3286ec463284e8a3 (1) eap : Previous EAP request found for state 0x3286ec463284e8a3, released from the list (1) eap : Peer sent method NAK (3) (1) eap : Found mutually acceptable type TLS (13) (1) eap : Calling eap_tls to process EAP data (1) eap_tls : Flushing SSL sessions (of #0) (1) eap_tls : Requiring client certificate (1) eap_tls : Initiate (1) eap_tls : Requiring client certificate (1) eap_tls : Start returned 1 (1) eap : New EAP session, adding 'State' attribute to reply 0x3286ec463385e1a3 (1) [eap] = handled (1) } # authenticate = handled (1) Sending Access-Challenge packet to host 192.168.2.42 port 32769, id=17, length=0 (1) EAP-Message = 0x010300060d20 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x3286ec463385e1a3af3e7e5c1128d5dc Sending Access-Challenge Id 17 from 10.1.2.27:1812 to 192.168.2.42:32769 EAP-Message = 0x010300060d20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3286ec463385e1a3af3e7e5c1128d5dc (1) Finished request Waking up in 0.3 seconds. Received Access-Request Id 18 from 192.168.2.42:32769 to 10.1.2.27:1812 length 398 User-Name = 'Mac284-1' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '00236c94ed49' Called-Station-Id = '34a84edc9b40:test' NAS-Port = 1 Cisco-AVPair = 'audit-session-id=c0a8022a0006da17589c709a' Acct-Session-Id = '589c709a/00:23:6c:94:ed:49/89377' NAS-IP-Address = 192.168.2.42 NAS-Identifier = 'cisco-wlc' Airespace-Wlan-Id = 6 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020300980d800000008e1603010089010000850301589c70aac65ee802893e9669a76d4b6ba5245eadb48ca2b02ca1a2c67e308b5e00004a00ffc024c023c00ac009c007c008c028c027c014c013c011c012c026c025c02ac029c005c004c002c003c00fc00ec00cc00d003d003c002f000500040035000a0067006b00330039001601000012000a00080006001700180019000b00020100 State = 0x3286ec463385e1a3af3e7e5c1128d5dc Message-Authenticator = 0x544710c4d800cca04ae8d70b22ba2bd6 (2) Received Access-Request packet from host 192.168.2.42 port 32769, id=18, length=398 (2) User-Name = 'Mac284-1' (2) Chargeable-User-Identity = 0x00 (2) Location-Capable = Civix-Location (2) Calling-Station-Id = '00236c94ed49' (2) Called-Station-Id = '34a84edc9b40:test' (2) NAS-Port = 1 (2) Cisco-AVPair = 'audit-session-id=c0a8022a0006da17589c709a' (2) Acct-Session-Id = '589c709a/00:23:6c:94:ed:49/89377' (2) NAS-IP-Address = 192.168.2.42 (2) NAS-Identifier = 'cisco-wlc' (2) Airespace-Wlan-Id = 6 (2) Service-Type = Framed-User (2) Framed-MTU = 1300 (2) NAS-Port-Type = Wireless-802.11 (2) EAP-Message = 0x020300980d800000008e1603010089010000850301589c70aac65ee802893e9669a76d4b6ba5245eadb48ca2b02ca1a2c67e308b5e00004a00ffc024c023c00ac009c007c008c028c027c014c013c011c012c026c025c02ac029c005c004c002c003c00fc00ec00cc00d003d003c002f000500040035000a0067006b00330039001601000012000a00080006001700180019000b00020100 (2) State = 0x3286ec463385e1a3af3e7e5c1128d5dc (2) Message-Authenticator = 0x544710c4d800cca04ae8d70b22ba2bd6 (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) filter_username filter_username { (2) if (!&User-Name) (2) if (!&User-Name) -> FALSE (2) if (&User-Name =~ / /) (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@.*@/ ) (2) if (&User-Name =~ /@.*@/ ) -> FALSE (2) if (&User-Name =~ /\\.\\./ ) (2) if (&User-Name =~ /\\.\\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\\.$/) (2) if (&User-Name =~ /\\.$/) -> FALSE (2) if (&User-Name =~ /(a)\\./) (2) if (&User-Name =~ /(a)\\./) -> FALSE (2) } # filter_username filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix : Checking for suffix after "@" (2) suffix : No '@' in User-Name = "Mac284-1", looking up realm NULL (2) suffix : No such realm "NULL" (2) [suffix] = noop (2) if (Called-Station-ID =~ /:test$/) (2) if (Called-Station-ID =~ /:test$/) -> TRUE (2) if (Called-Station-ID =~ /:test$/) { (2) eap : Peer sent code Response (2) ID 3 length 152 (2) eap : No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) [files] = noop (2) [maclist] = ok (2) if (notfound) (2) if (notfound) -> FALSE (2) if ( mac-add !~ /%{Calling-Station-ID}/i) (2) EXPAND %{Calling-Station-ID} (2) --> 00236c94ed49 (2) ERROR: Failed retrieving values required to evaluate condition (2) } # if (Called-Station-ID =~ /:test$/) = updated (2) [files] = noop (2) [expiration] = noop (2) [logintime] = noop (2) [pap] = noop (2) } # authorize = updated (2) Found Auth-Type = EAP (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap : Expiring EAP session with state 0x3286ec463385e1a3 (2) eap : Finished EAP session with state 0x3286ec463385e1a3 (2) eap : Previous EAP request found for state 0x3286ec463385e1a3, released from the list (2) eap : Peer sent method TLS (13) (2) eap : EAP TLS (13) (2) eap : Calling eap_tls to process EAP data (2) eap_tls : Authenticate (2) eap_tls : processing EAP-TLS TLS Length 142 (2) eap_tls : Length Included (2) eap_tls : eaptls_verify returned 11 (2) eap_tls : (other): before/accept initialization (2) eap_tls : TLS_accept: before/accept initialization (2) eap_tls : <<< TLS 1.0 Handshake [length 0089], ClientHello (2) eap_tls : TLS_accept: SSLv3 read client hello A (2) eap_tls : >>> TLS 1.0 Handshake [length 0059], ServerHello (2) eap_tls : TLS_accept: SSLv3 write server hello A (2) eap_tls : >>> TLS 1.0 Handshake [length 07aa], Certificate (2) eap_tls : TLS_accept: SSLv3 write certificate A (2) eap_tls : >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange (2) eap_tls : TLS_accept: SSLv3 write key exchange A (2) eap_tls : >>> TLS 1.0 Handshake [length 00b9], CertificateRequest (2) eap_tls : TLS_accept: SSLv3 write certificate request A (2) eap_tls : TLS_accept: SSLv3 flush data (2) eap_tls : TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode (2) eap_tls : eaptls_process returned 13 (2) eap : New EAP session, adding 'State' attribute to reply 0x3286ec463082e1a3 (2) [eap] = handled (2) } # authenticate = handled (2) Sending Access-Challenge packet to host 192.168.2.42 port 32769, id=18, length=0 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x3286ec463082e1a3af3e7e5c1128d5dc Sending Access-Challenge Id 18 from 10.1.2.27:1812 to 192.168.2.42:32769 EAP-Message = 0x010403ec0dc000000a1b1603010059020000550301589c70a92d3e8d6b590e516b0aa7cb43a4bce8de31334b620f07e5f22ac9e194204fc06eb146aaf33925cb9503d38e0aed4ef2b6b082f6e485abf50ceb399cae73c01400000dff01000100000b00040300010216030107aa0b0007a60007a30003cf308203cb308202b3a003020102020101300d06092a864886f70d01010405003081a6310b3009060355040613024445311b301906035504081312426164656e2d577565727474656d626572673111300f060355040713084672656962757267312d302b060355040a13244d61782d506c616e636b2d496e73746974757420662e20496d6d756e62696f6c6f6769653125302306092a864886f70d010901161673797374656d40696d6d756e62696f2e6d70672e64653111300f060355040313084d504949422d4341301e170d3038303830353131333532335a170d3138303830333131333532335a308191310b3009060355040613024445311b301906035504081312426164656e2d577565727474656d62657267312d302b060355040a13244d61782d506c616e636b2d496e73746974757420662e20496d6d756e62696f6c6f676965310f300d060355040313064d61633333393125302306092a864886f70d010901161673797374656d40696d6d756e62696f2e6d70672e64653082012 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3286ec463082e1a3af3e7e5c1128d5dc (2) Finished request Waking up in 0.2 seconds. Received Access-Request Id 19 from 192.168.2.42:32769 to 10.1.2.27:1812 length 252 User-Name = 'Mac284-1' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '00236c94ed49' Called-Station-Id = '34a84edc9b40:test' NAS-Port = 1 Cisco-AVPair = 'audit-session-id=c0a8022a0006da17589c709a' Acct-Session-Id = '589c709a/00:23:6c:94:ed:49/89377' NAS-IP-Address = 192.168.2.42 NAS-Identifier = 'cisco-wlc' Airespace-Wlan-Id = 6 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020400060d00 State = 0x3286ec463082e1a3af3e7e5c1128d5dc Message-Authenticator = 0x0d72f1f75ef029f407528b3aeefb8e35 (3) Received Access-Request packet from host 192.168.2.42 port 32769, id=19, length=252 (3) User-Name = 'Mac284-1' (3) Chargeable-User-Identity = 0x00 (3) Location-Capable = Civix-Location (3) Calling-Station-Id = '00236c94ed49' (3) Called-Station-Id = '34a84edc9b40:test' (3) NAS-Port = 1 (3) Cisco-AVPair = 'audit-session-id=c0a8022a0006da17589c709a' (3) Acct-Session-Id = '589c709a/00:23:6c:94:ed:49/89377' (3) NAS-IP-Address = 192.168.2.42 (3) NAS-Identifier = 'cisco-wlc' (3) Airespace-Wlan-Id = 6 (3) Service-Type = Framed-User (3) Framed-MTU = 1300 (3) NAS-Port-Type = Wireless-802.11 (3) EAP-Message = 0x020400060d00 (3) State = 0x3286ec463082e1a3af3e7e5c1128d5dc (3) Message-Authenticator = 0x0d72f1f75ef029f407528b3aeefb8e35 (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) filter_username filter_username { (3) if (!&User-Name) (3) if (!&User-Name) -> FALSE (3) if (&User-Name =~ / /) (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@.*@/ ) (3) if (&User-Name =~ /@.*@/ ) -> FALSE (3) if (&User-Name =~ /\\.\\./ ) (3) if (&User-Name =~ /\\.\\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\\.$/) (3) if (&User-Name =~ /\\.$/) -> FALSE (3) if (&User-Name =~ /(a)\\./) (3) if (&User-Name =~ /(a)\\./) -> FALSE (3) } # filter_username filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix : Checking for suffix after "@" (3) suffix : No '@' in User-Name = "Mac284-1", looking up realm NULL (3) suffix : No such realm "NULL" (3) [suffix] = noop (3) if (Called-Station-ID =~ /:test$/) (3) if (Called-Station-ID =~ /:test$/) -> TRUE (3) if (Called-Station-ID =~ /:test$/) { (3) eap : Peer sent code Response (2) ID 4 length 6 (3) eap : No EAP Start, assuming it's an on-going EAP conversation (3) [eap] = updated (3) [files] = noop (3) [maclist] = ok (3) if (notfound) (3) if (notfound) -> FALSE (3) if ( mac-add !~ /%{Calling-Station-ID}/i) (3) EXPAND %{Calling-Station-ID} (3) --> 00236c94ed49 (3) ERROR: Failed retrieving values required to evaluate condition (3) } # if (Called-Station-ID =~ /:test$/) = updated (3) [files] = noop (3) [expiration] = noop (3) [logintime] = noop (3) [pap] = noop (3) } # authorize = updated (3) Found Auth-Type = EAP (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap : Expiring EAP session with state 0x3286ec463082e1a3 (3) eap : Finished EAP session with state 0x3286ec463082e1a3 (3) eap : Previous EAP request found for state 0x3286ec463082e1a3, released from the list (3) eap : Peer sent method TLS (13) (3) eap : EAP TLS (13) (3) eap : Calling eap_tls to process EAP data (3) eap_tls : Authenticate (3) eap_tls : processing EAP-TLS (3) eap_tls : Received TLS ACK (3) eap_tls : Received TLS ACK (3) eap_tls : ACK handshake fragment handler (3) eap_tls : eaptls_verify returned 1 (3) eap_tls : eaptls_process returned 13 (3) eap : New EAP session, adding 'State' attribute to reply 0x3286ec463183e1a3 (3) [eap] = handled (3) } # authenticate = handled (3) Sending Access-Challenge packet to host 192.168.2.42 port 32769, id=19, length=0 (3) EAP-Message = 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 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x3286ec463183e1a3af3e7e5c1128d5dc Sending Access-Challenge Id 19 from 10.1.2.27:1812 to 192.168.2.42:32769 EAP-Message = 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 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3286ec463183e1a3af3e7e5c1128d5dc (3) Finished request Waking up in 0.2 seconds. Received Access-Request Id 20 from 192.168.2.42:32769 to 10.1.2.27:1812 length 252 User-Name = 'Mac284-1' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '00236c94ed49' Called-Station-Id = '34a84edc9b40:test' NAS-Port = 1 Cisco-AVPair = 'audit-session-id=c0a8022a0006da17589c709a' Acct-Session-Id = '589c709a/00:23:6c:94:ed:49/89377' NAS-IP-Address = 192.168.2.42 NAS-Identifier = 'cisco-wlc' Airespace-Wlan-Id = 6 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020500060d00 State = 0x3286ec463183e1a3af3e7e5c1128d5dc Message-Authenticator = 0x4cc5f7ef51a86729426329df7f3dcabd (4) Received Access-Request packet from host 192.168.2.42 port 32769, id=20, length=252 (4) User-Name = 'Mac284-1' (4) Chargeable-User-Identity = 0x00 (4) Location-Capable = Civix-Location (4) Calling-Station-Id = '00236c94ed49' (4) Called-Station-Id = '34a84edc9b40:test' (4) NAS-Port = 1 (4) Cisco-AVPair = 'audit-session-id=c0a8022a0006da17589c709a' (4) Acct-Session-Id = '589c709a/00:23:6c:94:ed:49/89377' (4) NAS-IP-Address = 192.168.2.42 (4) NAS-Identifier = 'cisco-wlc' (4) Airespace-Wlan-Id = 6 (4) Service-Type = Framed-User (4) Framed-MTU = 1300 (4) NAS-Port-Type = Wireless-802.11 (4) EAP-Message = 0x020500060d00 (4) State = 0x3286ec463183e1a3af3e7e5c1128d5dc (4) Message-Authenticator = 0x4cc5f7ef51a86729426329df7f3dcabd (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) filter_username filter_username { (4) if (!&User-Name) (4) if (!&User-Name) -> FALSE (4) if (&User-Name =~ / /) (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@.*@/ ) (4) if (&User-Name =~ /@.*@/ ) -> FALSE (4) if (&User-Name =~ /\\.\\./ ) (4) if (&User-Name =~ /\\.\\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\\.$/) (4) if (&User-Name =~ /\\.$/) -> FALSE (4) if (&User-Name =~ /(a)\\./) (4) if (&User-Name =~ /(a)\\./) -> FALSE (4) } # filter_username filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix : Checking for suffix after "@" (4) suffix : No '@' in User-Name = "Mac284-1", looking up realm NULL (4) suffix : No such realm "NULL" (4) [suffix] = noop (4) if (Called-Station-ID =~ /:test$/) (4) if (Called-Station-ID =~ /:test$/) -> TRUE (4) if (Called-Station-ID =~ /:test$/) { (4) eap : Peer sent code Response (2) ID 5 length 6 (4) eap : No EAP Start, assuming it's an on-going EAP conversation (4) [eap] = updated (4) [files] = noop (4) [maclist] = ok (4) if (notfound) (4) if (notfound) -> FALSE (4) if ( mac-add !~ /%{Calling-Station-ID}/i) (4) EXPAND %{Calling-Station-ID} (4) --> 00236c94ed49 (4) ERROR: Failed retrieving values required to evaluate condition (4) } # if (Called-Station-ID =~ /:test$/) = updated (4) [files] = noop (4) [expiration] = noop (4) [logintime] = noop (4) [pap] = noop (4) } # authorize = updated (4) Found Auth-Type = EAP (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap : Expiring EAP session with state 0x3286ec463183e1a3 (4) eap : Finished EAP session with state 0x3286ec463183e1a3 (4) eap : Previous EAP request found for state 0x3286ec463183e1a3, released from the list (4) eap : Peer sent method TLS (13) (4) eap : EAP TLS (13) (4) eap : Calling eap_tls to process EAP data (4) eap_tls : Authenticate (4) eap_tls : processing EAP-TLS (4) eap_tls : Received TLS ACK (4) eap_tls : Received TLS ACK (4) eap_tls : ACK handshake fragment handler (4) eap_tls : eaptls_verify returned 1 (4) eap_tls : eaptls_process returned 13 (4) eap : New EAP session, adding 'State' attribute to reply 0x3286ec463680e1a3 (4) [eap] = handled (4) } # authenticate = handled (4) Sending Access-Challenge packet to host 192.168.2.42 port 32769, id=20, length=0 (4) EAP-Message = 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 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x3286ec463680e1a3af3e7e5c1128d5dc Sending Access-Challenge Id 20 from 10.1.2.27:1812 to 192.168.2.42:32769 EAP-Message = 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 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3286ec463680e1a3af3e7e5c1128d5dc (4) Finished request Waking up in 0.2 seconds. Received Access-Request Id 21 from 192.168.2.42:32769 to 10.1.2.27:1812 length 1532 User-Name = 'Mac284-1' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '00236c94ed49' Called-Station-Id = '34a84edc9b40:test' NAS-Port = 1 Cisco-AVPair = 'audit-session-id=c0a8022a0006da17589c709a' Acct-Session-Id = '589c709a/00:23:6c:94:ed:49/89377' NAS-IP-Address = 192.168.2.42 NAS-Identifier = 'cisco-wlc' Airespace-Wlan-Id = 6 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 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 State = 0x3286ec463680e1a3af3e7e5c1128d5dc Message-Authenticator = 0x10295592d7b1c2ce3bb27ca74014847d (5) Received Access-Request packet from host 192.168.2.42 port 32769, id=21, length=1532 (5) User-Name = 'Mac284-1' (5) Chargeable-User-Identity = 0x00 (5) Location-Capable = Civix-Location (5) Calling-Station-Id = '00236c94ed49' (5) Called-Station-Id = '34a84edc9b40:test' (5) NAS-Port = 1 (5) Cisco-AVPair = 'audit-session-id=c0a8022a0006da17589c709a' (5) Acct-Session-Id = '589c709a/00:23:6c:94:ed:49/89377' (5) NAS-IP-Address = 192.168.2.42 (5) NAS-Identifier = 'cisco-wlc' (5) Airespace-Wlan-Id = 6 (5) Service-Type = Framed-User (5) Framed-MTU = 1300 (5) NAS-Port-Type = Wireless-802.11 (5) EAP-Message = 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 (5) State = 0x3286ec463680e1a3af3e7e5c1128d5dc (5) Message-Authenticator = 0x10295592d7b1c2ce3bb27ca74014847d (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) filter_username filter_username { (5) if (!&User-Name) (5) if (!&User-Name) -> FALSE (5) if (&User-Name =~ / /) (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@.*@/ ) (5) if (&User-Name =~ /@.*@/ ) -> FALSE (5) if (&User-Name =~ /\\.\\./ ) (5) if (&User-Name =~ /\\.\\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\\.$/) (5) if (&User-Name =~ /\\.$/) -> FALSE (5) if (&User-Name =~ /(a)\\./) (5) if (&User-Name =~ /(a)\\./) -> FALSE (5) } # filter_username filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix : Checking for suffix after "@" (5) suffix : No '@' in User-Name = "Mac284-1", looking up realm NULL (5) suffix : No such realm "NULL" (5) [suffix] = noop (5) if (Called-Station-ID =~ /:test$/) (5) if (Called-Station-ID =~ /:test$/) -> TRUE (5) if (Called-Station-ID =~ /:test$/) { (5) eap : Peer sent code Response (2) ID 6 length 1276 (5) eap : No EAP Start, assuming it's an on-going EAP conversation (5) [eap] = updated (5) [files] = noop (5) [maclist] = ok (5) if (notfound) (5) if (notfound) -> FALSE (5) if ( mac-add !~ /%{Calling-Station-ID}/i) (5) EXPAND %{Calling-Station-ID} (5) --> 00236c94ed49 (5) ERROR: Failed retrieving values required to evaluate condition (5) } # if (Called-Station-ID =~ /:test$/) = updated (5) [files] = noop (5) [expiration] = noop (5) [logintime] = noop (5) [pap] = noop (5) } # authorize = updated (5) Found Auth-Type = EAP (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap : Expiring EAP session with state 0x3286ec463680e1a3 (5) eap : Finished EAP session with state 0x3286ec463680e1a3 (5) eap : Previous EAP request found for state 0x3286ec463680e1a3, released from the list (5) eap : Peer sent method TLS (13) (5) eap : EAP TLS (13) (5) eap : Calling eap_tls to process EAP data (5) eap_tls : Authenticate (5) eap_tls : processing EAP-TLS TLS Length 2372 (5) eap_tls : Received EAP-TLS First Fragment of the message (5) eap_tls : eaptls_verify returned 9 (5) eap_tls : eaptls_process returned 13 (5) eap : New EAP session, adding 'State' attribute to reply 0x3286ec463781e1a3 (5) [eap] = handled (5) } # authenticate = handled (5) Sending Access-Challenge packet to host 192.168.2.42 port 32769, id=21, length=0 (5) EAP-Message = 0x010700060d00 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x3286ec463781e1a3af3e7e5c1128d5dc Sending Access-Challenge Id 21 from 10.1.2.27:1812 to 192.168.2.42:32769 EAP-Message = 0x010700060d00 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3286ec463781e1a3af3e7e5c1128d5dc (5) Finished request Waking up in 0.2 seconds. Received Access-Request Id 22 from 192.168.2.42:32769 to 10.1.2.27:1812 length 1366 User-Name = 'Mac284-1' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '00236c94ed49' Called-Station-Id = '34a84edc9b40:test' NAS-Port = 1 Cisco-AVPair = 'audit-session-id=c0a8022a0006da17589c709a' Acct-Session-Id = '589c709a/00:23:6c:94:ed:49/89377' NAS-IP-Address = 192.168.2.42 NAS-Identifier = 'cisco-wlc' Airespace-Wlan-Id = 6 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 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 State = 0x3286ec463781e1a3af3e7e5c1128d5dc Message-Authenticator = 0x5876b9620fed3f65ab38aa94397a1e96 (6) Received Access-Request packet from host 192.168.2.42 port 32769, id=22, length=1366 (6) User-Name = 'Mac284-1' (6) Chargeable-User-Identity = 0x00 (6) Location-Capable = Civix-Location (6) Calling-Station-Id = '00236c94ed49' (6) Called-Station-Id = '34a84edc9b40:test' (6) NAS-Port = 1 (6) Cisco-AVPair = 'audit-session-id=c0a8022a0006da17589c709a' (6) Acct-Session-Id = '589c709a/00:23:6c:94:ed:49/89377' (6) NAS-IP-Address = 192.168.2.42 (6) NAS-Identifier = 'cisco-wlc' (6) Airespace-Wlan-Id = 6 (6) Service-Type = Framed-User (6) Framed-MTU = 1300 (6) NAS-Port-Type = Wireless-802.11 (6) EAP-Message = 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 (6) State = 0x3286ec463781e1a3af3e7e5c1128d5dc (6) Message-Authenticator = 0x5876b9620fed3f65ab38aa94397a1e96 (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) filter_username filter_username { (6) if (!&User-Name) (6) if (!&User-Name) -> FALSE (6) if (&User-Name =~ / /) (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@.*@/ ) (6) if (&User-Name =~ /@.*@/ ) -> FALSE (6) if (&User-Name =~ /\\.\\./ ) (6) if (&User-Name =~ /\\.\\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\\.$/) (6) if (&User-Name =~ /\\.$/) -> FALSE (6) if (&User-Name =~ /(a)\\./) (6) if (&User-Name =~ /(a)\\./) -> FALSE (6) } # filter_username filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix : Checking for suffix after "@" (6) suffix : No '@' in User-Name = "Mac284-1", looking up realm NULL (6) suffix : No such realm "NULL" (6) [suffix] = noop (6) if (Called-Station-ID =~ /:test$/) (6) if (Called-Station-ID =~ /:test$/) -> TRUE (6) if (Called-Station-ID =~ /:test$/) { (6) eap : Peer sent code Response (2) ID 7 length 1112 (6) eap : No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) [files] = noop (6) [maclist] = ok (6) if (notfound) (6) if (notfound) -> FALSE (6) if ( mac-add !~ /%{Calling-Station-ID}/i) (6) EXPAND %{Calling-Station-ID} (6) --> 00236c94ed49 (6) ERROR: Failed retrieving values required to evaluate condition (6) } # if (Called-Station-ID =~ /:test$/) = updated (6) [files] = noop (6) [expiration] = noop (6) [logintime] = noop (6) [pap] = noop (6) } # authorize = updated (6) Found Auth-Type = EAP (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap : Expiring EAP session with state 0x3286ec463781e1a3 (6) eap : Finished EAP session with state 0x3286ec463781e1a3 (6) eap : Previous EAP request found for state 0x3286ec463781e1a3, released from the list (6) eap : Peer sent method TLS (13) (6) eap : EAP TLS (13) (6) eap : Calling eap_tls to process EAP data (6) eap_tls : Authenticate (6) eap_tls : processing EAP-TLS (6) eap_tls : eaptls_verify returned 7 (6) eap_tls : Done initial handshake (6) eap_tls : <<< TLS 1.0 Handshake [length 07ae], Certificate (6) eap_tls : chain-depth=1, (6) eap_tls : error=0 (6) eap_tls : --> User-Name = Mac284-1 (6) eap_tls : --> BUF-Name = ###########blurred out########### (6) eap_tls : --> subject = /C=DE/ST=###########blurred out########### (6) eap_tls : --> issuer = /C=DE/ST=###########blurred out########### (6) eap_tls : --> verify return:1 (6) eap_tls : chain-depth=0, (6) eap_tls : error=0 (6) eap_tls : --> User-Name = Mac284-1 (6) eap_tls : --> BUF-Name = Mac284-1 (6) eap_tls : --> subject = /C=DE/ST=###########blurred out########### (6) eap_tls : --> issuer = /C=DE/ST=###########blurred out########### (6) eap_tls : --> verify return:1 (6) eap_tls : TLS_accept: SSLv3 read client certificate A (6) eap_tls : <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange (6) eap_tls : TLS_accept: SSLv3 read client key exchange A (6) eap_tls : <<< TLS 1.0 Handshake [length 0106], CertificateVerify (6) eap_tls : TLS_accept: SSLv3 read certificate verify A (6) eap_tls : <<< TLS 1.0 ChangeCipherSpec [length 0001] (6) eap_tls : <<< TLS 1.0 Handshake [length 0010], Finished (6) eap_tls : TLS_accept: SSLv3 read finished A (6) eap_tls : >>> TLS 1.0 ChangeCipherSpec [length 0001] (6) eap_tls : TLS_accept: SSLv3 write change cipher spec A (6) eap_tls : >>> TLS 1.0 Handshake [length 0010], Finished (6) eap_tls : TLS_accept: SSLv3 write finished A (6) eap_tls : TLS_accept: SSLv3 flush data SSL: adding session 4fc06eb146aaf33925cb9503d38e0aed4ef2b6b082f6e485abf50ceb399cae73 to cache (6) eap_tls : (other): SSL negotiation finished successfully SSL Connection Established (6) eap_tls : eaptls_process returned 13 (6) eap : New EAP session, adding 'State' attribute to reply 0x3286ec46348ee1a3 (6) [eap] = handled (6) } # authenticate = handled (6) Sending Access-Challenge packet to host 192.168.2.42 port 32769, id=22, length=0 (6) EAP-Message = 0x010800450d800000003b1403010001011603010030dfca648e3d3d11e62b70f33686cc777c4725cbaf9ac64a187585afb0e0e9a1ab552d1d9477d6287a5ab1eb57aa8cfc90 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x3286ec46348ee1a3af3e7e5c1128d5dc Sending Access-Challenge Id 22 from 10.1.2.27:1812 to 192.168.2.42:32769 EAP-Message = 0x010800450d800000003b1403010001011603010030dfca648e3d3d11e62b70f33686cc777c4725cbaf9ac64a187585afb0e0e9a1ab552d1d9477d6287a5ab1eb57aa8cfc90 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3286ec46348ee1a3af3e7e5c1128d5dc (6) Finished request Waking up in 0.2 seconds. Received Access-Request Id 23 from 192.168.2.42:32769 to 10.1.2.27:1812 length 252 User-Name = 'Mac284-1' Chargeable-User-Identity = 0x00 Location-Capable = Civix-Location Calling-Station-Id = '00236c94ed49' Called-Station-Id = '34a84edc9b40:test' NAS-Port = 1 Cisco-AVPair = 'audit-session-id=c0a8022a0006da17589c709a' Acct-Session-Id = '589c709a/00:23:6c:94:ed:49/89377' NAS-IP-Address = 192.168.2.42 NAS-Identifier = 'cisco-wlc' Airespace-Wlan-Id = 6 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020800060d00 State = 0x3286ec46348ee1a3af3e7e5c1128d5dc Message-Authenticator = 0xe683920c6f081c2299ff1364520a77a0 (7) Received Access-Request packet from host 192.168.2.42 port 32769, id=23, length=252 (7) User-Name = 'Mac284-1' (7) Chargeable-User-Identity = 0x00 (7) Location-Capable = Civix-Location (7) Calling-Station-Id = '00236c94ed49' (7) Called-Station-Id = '34a84edc9b40:test' (7) NAS-Port = 1 (7) Cisco-AVPair = 'audit-session-id=c0a8022a0006da17589c709a' (7) Acct-Session-Id = '589c709a/00:23:6c:94:ed:49/89377' (7) NAS-IP-Address = 192.168.2.42 (7) NAS-Identifier = 'cisco-wlc' (7) Airespace-Wlan-Id = 6 (7) Service-Type = Framed-User (7) Framed-MTU = 1300 (7) NAS-Port-Type = Wireless-802.11 (7) EAP-Message = 0x020800060d00 (7) State = 0x3286ec46348ee1a3af3e7e5c1128d5dc (7) Message-Authenticator = 0xe683920c6f081c2299ff1364520a77a0 (7) # Executing section authorize from file /etc/raddb/sites-enabled/default (7) authorize { (7) filter_username filter_username { (7) if (!&User-Name) (7) if (!&User-Name) -> FALSE (7) if (&User-Name =~ / /) (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@.*@/ ) (7) if (&User-Name =~ /@.*@/ ) -> FALSE (7) if (&User-Name =~ /\\.\\./ ) (7) if (&User-Name =~ /\\.\\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\\.$/) (7) if (&User-Name =~ /\\.$/) -> FALSE (7) if (&User-Name =~ /(a)\\./) (7) if (&User-Name =~ /(a)\\./) -> FALSE (7) } # filter_username filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix : Checking for suffix after "@" (7) suffix : No '@' in User-Name = "Mac284-1", looking up realm NULL (7) suffix : No such realm "NULL" (7) [suffix] = noop (7) if (Called-Station-ID =~ /:test$/) (7) if (Called-Station-ID =~ /:test$/) -> TRUE (7) if (Called-Station-ID =~ /:test$/) { (7) eap : Peer sent code Response (2) ID 8 length 6 (7) eap : No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) [files] = noop (7) [maclist] = ok (7) if (notfound) (7) if (notfound) -> FALSE (7) if ( mac-add !~ /%{Calling-Station-ID}/i) (7) EXPAND %{Calling-Station-ID} (7) --> 00236c94ed49 (7) ERROR: Failed retrieving values required to evaluate condition (7) } # if (Called-Station-ID =~ /:test$/) = updated (7) [files] = noop (7) [expiration] = noop (7) [logintime] = noop (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = EAP (7) # Executing group from file /etc/raddb/sites-enabled/default (7) authenticate { (7) eap : Expiring EAP session with state 0x3286ec46348ee1a3 (7) eap : Finished EAP session with state 0x3286ec46348ee1a3 (7) eap : Previous EAP request found for state 0x3286ec46348ee1a3, released from the list (7) eap : Peer sent method TLS (13) (7) eap : EAP TLS (13) (7) eap : Calling eap_tls to process EAP data (7) eap_tls : Authenticate (7) eap_tls : processing EAP-TLS (7) eap_tls : Received TLS ACK (7) eap_tls : Received TLS ACK (7) eap_tls : ACK handshake is finished (7) eap_tls : eaptls_verify returned 3 (7) eap_tls : eaptls_process returned 3 (7) eap_tls : Saving session 4fc06eb146aaf33925cb9503d38e0aed4ef2b6b082f6e485abf50ceb399cae73 vps 0x7f11ef620680 in the cache (7) eap : Freeing handler (7) [eap] = ok (7) } # authenticate = ok (7) Login OK: [Mac284-1] (from client cisco-wlc port 1 cli 00236c94ed49) (7) # Executing section post-auth from file /etc/raddb/sites-enabled/default (7) post-auth { (7) [exec] = noop (7) remove_reply_message_if_eap remove_reply_message_if_eap { (7) if (&reply:EAP-Message && &reply:Reply-Message) (7) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (7) else else { (7) [noop] = noop (7) } # else else = noop (7) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop (7) } # post-auth = noop (7) Sending Access-Accept packet to host 192.168.2.42 port 32769, id=23, length=0 (7) MS-MPPE-Recv-Key = 0x524620c62a30b50ced129eb501237962ea4113db5e897220560b8685fa5901e2 (7) MS-MPPE-Send-Key = 0x891949b902c55410351d498c2eb18db6cbe6832859c4b2dee3fa087ff2a0c248 (7) EAP-MSK = 0x524620c62a30b50ced129eb501237962ea4113db5e897220560b8685fa5901e2891949b902c55410351d498c2eb18db6cbe6832859c4b2dee3fa087ff2a0c248 (7) EAP-EMSK = 0x880ef79921478e5bd23d143295c03af31d8a2c9bf7c7abbed6709b413df36c5224299e1d257d9309cdf9d970d522e2e97ac7f37b27b63ffe15c1d342ba8562d3 (7) EAP-Session-Id = 0x0d589c70aac65ee802893e9669a76d4b6ba5245eadb48ca2b02ca1a2c67e308b5e589c70a92d3e8d6b590e516b0aa7cb43a4bce8de31334b620f07e5f22ac9e194 (7) EAP-Message = 0x03080004 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) User-Name = 'Mac284-1' Sending Access-Accept Id 23 from 10.1.2.27:1812 to 192.168.2.42:32769 MS-MPPE-Recv-Key = 0x524620c62a30b50ced129eb501237962ea4113db5e897220560b8685fa5901e2 MS-MPPE-Send-Key = 0x891949b902c55410351d498c2eb18db6cbe6832859c4b2dee3fa087ff2a0c248 EAP-Message = 0x03080004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = 'Mac284-1' (7) Finished request Waking up in 0.2 seconds. Waking up in 4.5 seconds. ^C [root@radrad raddb]#

3 5

Problem with backslash in User-Name
by Marco Scholl 10 Feb '17

10 Feb '17

Hi Guys, i have a problem with 3.0.12 and User-Name. I send a request with domain name included in User-Name: radtest -t mschap "test\radius" radius localhost 1 testing123 On freeradius i see User-Name = "test\radius" in line 2. (0) Received Access-Request Id 61 from 127.0.0.1:34351 to 127.0.0.1:1812 length 142 (0) User-Name = "test\radius" (0) NAS-IP-Address = 10.100.254.174 (0) NAS-Port = 1 (0) Message-Authenticator = 0xdd90f7f9365aca2896632b1a531bb760 (0) Framed-Protocol = PPP (0) MS-CHAP-Challenge = 0xe7d0a3bb2ba11619 (0) MS-CHAP-Response = 0x0001000000000000000000000000000000000000000000000000f16973c17df493cec36e7f24c5ed837697dbb69248fdb117 (0) # Executing section authorize from file /etc/freeradius/sites-enabled/default (0) authorize { (0) [preprocess] = ok (0) ntdomain: Checking for prefix before "\" (0) ntdomain: No '\' in User-Name = "test adius", looking up realm NULL (0) ntdomain: No such realm "NULL" ... But for ntdomain the User-Name is broken. The blackslash escape the "r" so i seed "test adius" instead "test\radius". I also tried to use split_username_nai but here the same problem. My problem is, that windows send every time a domain. Anybody have an idea to fix this bug? Greets Marco

3 4

Getting radius request hung issue
by manjunath uthappa ponnachana 09 Feb '17

09 Feb '17

Hi,Getting following issueWed Feb 8 17:51:06: Info: WARNING: Child is hung for request 12945049 in component <core> module <queue>.Please let me know the cause and resolution for the sameFor your information "max_requests" has been set to 25000.Is this creating some problem?Thanks & regardsManjunath

2 1

Freeradius Samba4 group restriction
by Dávid Erős 09 Feb '17

09 Feb '17

Hi All, I am seeking some help regarding group access. I've have built a system by using freeradius, samba4 (AD) to secure our Wireless network. The client authentication works perfectly fine, but I'd like to deny access to some specific groups. I can deny access to users but not groups. Could someone point me to the right direction? Regards, David

5 7