April 2017 - Freeradius-Users - lists.freeradius.org

Defining clients in virtual servers
by Clayton Knorr 25 Apr '17

25 Apr '17

Is there any way to get one virtual server or the default server to proxy requests to a virtual server using proxy-to-realm without having the client configured globally in clients.conf or equivalent, but only in the virtual server. Or have the client defined globally but have the radius key overridden by the client specified in the virtual server config. So I have one virtual server listening on a specific IP and port, which looks at the nas ID and proxies to a realm correlated with that nas id. Essentially what I'm trying to achieve is to have clients with a dynamic (unknown) IP address, but different radius keys depending on the realm identified in the nas id.

3 5

Freeradius in dmz (not joined to AD) and authorization from AD LDAP
by chose 25 Apr '17

25 Apr '17

Good morning, is it able to authorize users from Windows AD LDAP from Freeradius in DMZ zone without joining AD (security reasons). I found that there is problem with passwords hash, freeradius gets password in mschapv2 ... Thanks for tips and best regards J.Karliak -- Ma domena pouziva zabezpeceni a kontrolu SPF (www.openspf.org) a DomainKeys/DKIM (s ADSP) a implementaci DMARC. Pokud mate problemy s dorucenim emailu, zacnete pouzivat metody overeni puvody emailu zminene vyse. Dekuji. My domain use SPF (www.openspf.org) and DomainKeys/DKIM (with ADSP) policy and implementation of the DMARC. If you've problem with sending emails to me, start using email origin methods mentioned above. Thank you.

3 2

Cannot get MySQL backend to work in Ubuntu 17.04
by Martin Rys 24 Apr '17

24 Apr '17

Hiya, I've been trying for a while to get MySQL radius backend to work but only had success with the basic auth mode. select * from radpostauth; ^ Shows nothing, for some reason freeRADIUS doesn't even write there even though the log claims it does so successfully. Here is everything I tried, step by step. You can either open this link and read it somehow formatted on my PrivateBin instance, or you can read it in plain text posted below the link. https://paste.c0rn3j.com/?44f340705be383c4#6nPNN39P98jGng38weWx0223pyGU7UQO… Create new LXC container running Ubuntu 17.04(I doubt this has any effect on my problems, but noting it anyways) and login as root. apt update apt install freeradius-mysql Package: freeradius Version: 3.0.12+dfsg-4ubuntu1 Go by https://wiki.freeradius.org/guide/Basic-configuration-HOWTO add >>> c0rn3jj Cleartext-Password := "123" <<< to the first line of /etc/freeradius/3.0/users systemctl restart freeradius radtest c0rn3jj 123 localhost 0 testing123 ^ Access-Accept. go by https://wiki.freeradius.org/guide/SQL-HOWTO-for-freeradius-3.x-on-Debian-Ub… apt install mariadb-server Package: mariadb-server Version: 10.1.22-3 mysql -uroot -p ^default install leaves root with empty password CREATE DATABASE radius; exit mysql -uroot -p radius < /etc/freeradius/3.0/mods-config/sql/main/mysql/schema.sql /etc/freeradius/3.0/mods-config/sql/main/mysql/setup.sql ^ change password from radpass to V9WcNpFEfY69MhuL mysql -uroot -p radius < /etc/freeradius/3.0/mods-config/sql/main/mysql/setup.sql /etc/freeradius/3.0/mods-available/sql ^ uncomment server/port/login/password and change password to V9WcNpFEfY69MhuL, change dialect to mysql ln -s /etc/freeradius/3.0/mods-available/sql /etc/freeradius/3.0/mods-enabled/sql /etc/freeradius/3.0/sites-available/default ^ guide says to uncomment sql in the authorize block, however it is already uncommented but there's a - sign before it? -sql? I did nothing here. Same story with the accounting block. Same stuff with inner-tunnel. "Your radiusd.conf should then look something like this" "then"? I did nothing with the radiusd.conf, moreover there's no authoriSe or authorize block either. Do nothing with the file. Now I get to the Populating SQL section insert into radcheck (username,attribute,op,value) values("c0rn3j", "Cleartext-Password", ":=", "123"); select * from radcheck; radtest c0rn3j 123 localhost 0 testing123 ^ fail insert into radreply (username,attribute,op,value) values("c0rn3j", "Framed-IP-Address", ":=", "1.2.3.4"); radtest c0rn3j 123 localhost 0 testing123 ^fail Client output - https://paste.c0rn3j.com/?0af6cf0b0aa86d67#Lo53mu+IQ2RQPQOvMl/B0nxH+0/Fal4c… systemctl stop freeradius /usr/sbin/freeradius -X > /tmp/radlog -X log either on https://paste.c0rn3j.com/?f6dc7f8decd19541#QheezTe5NftT6qj1furUsZRL4TL90QSm… or https://ptpb.pw/n7Re

4 9

FW: EAP authentication with Windows 10
by Rob Rutledge 23 Apr '17

23 Apr '17

Hi All: I have had Freeradius up and running successfully since February. I set up a Windows 10 wireless client to authenticate to it along with an iPhone 6. For some reason the Windows 10 client quit working last week. (The iPhone is still working fine although I see in the debugs it is using TLS1.0) I assumed it was a problem with the certificates expiring, but creating new ones has not helped. Therefore I went back to the originals. I was not able to get the client.p12 certificate installed so instead I use WPAV2 and I did not specify the username/password in my AP. Therefore the authentication process would let me enter the username/password combination and then have me accept the certificate which I only had to configure once. Then it stopped working and I cannot even get past the username/password combination now. I have provided the debug logs if anyone would be so kind to look at them. Any help would be appreciated. Ready to process requests (0) Received Access-Request Id 127 from 10.160.134.40:1645 to 10.160.134.60:1812 length 204 (0) User-Name = "Robby" (0) Framed-MTU = 1400 (0) Called-Station-Id = "0026.cba5.c330:BigBang_2" (0) Calling-Station-Id = "c8f7.334c.b878" (0) Cisco-AVPair = "ssid=BigBang_2" (0) Service-Type = Login-User (0) Cisco-AVPair = "service-type=Login" (0) Message-Authenticator = 0x43e8c41ae092bd8de6f33591cf730c05 (0) EAP-Message = 0x0202000a01526f626279 (0) NAS-Port-Type = Wireless-802.11 (0) NAS-Port = 625 (0) NAS-Port-Id = "625" (0) NAS-IP-Address = 10.160.134.40 (0) NAS-Identifier = "txweahomxp-ap1142001" (0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "Robby", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 2 length 10 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 3 length 22 (0) eap: EAP session adding &reply:State = 0x8337d5108334d1a6 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) Sent Access-Challenge Id 127 from 10.160.134.60:1812 to 10.160.134.40:1645 length 0 (0) EAP-Message = 0x0103001604101e263ad0cd148ac153878d4e36fd2bb0 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x8337d5108334d1a62b010c57ecd141a1 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 128 from 10.160.134.40:1645 to 10.160.134.60:1812 length 221 (1) User-Name = "Robby" (1) Framed-MTU = 1400 (1) Called-Station-Id = "0026.cba5.c330:BigBang_2" (1) Calling-Station-Id = "c8f7.334c.b878" (1) Cisco-AVPair = "ssid=BigBang_2" (1) Service-Type = Login-User (1) Cisco-AVPair = "service-type=Login" (1) Message-Authenticator = 0x35d76926529cca52c1508fc0bd80dc21 (1) EAP-Message = 0x020300090319152b11 (1) NAS-Port-Type = Wireless-802.11 (1) NAS-Port = 625 (1) NAS-Port-Id = "625" (1) State = 0x8337d5108334d1a62b010c57ecd141a1 (1) NAS-IP-Address = 10.160.134.40 (1) NAS-Identifier = "txweahomxp-ap1142001" (1) session-state: No cached attributes (1) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "Robby", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 3 length 9 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) files: users: Matched entry Robby at line 26 (1) [files] = ok (1) [expiration] = noop (1) [logintime] = noop (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x8337d5108334d1a6 (1) eap: Finished EAP session with state 0x8337d5108334d1a6 (1) eap: Previous EAP request found for state 0x8337d5108334d1a6, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new EAP-TLS session (1) eap_peap: Flushing SSL sessions (of #0) (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 4 length 6 (1) eap: EAP session adding &reply:State = 0x8337d5108233cca6 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (1) Sent Access-Challenge Id 128 from 10.160.134.60:1812 to 10.160.134.40:1645 length 0 (1) EAP-Message = 0x010400061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x8337d5108233cca62b010c57ecd141a1 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 129 from 10.160.134.40:1645 to 10.160.134.60:1812 length 422 (2) User-Name = "Robby" (2) Framed-MTU = 1400 (2) Called-Station-Id = "0026.cba5.c330:BigBang_2" (2) Calling-Station-Id = "c8f7.334c.b878" (2) Cisco-AVPair = "ssid=BigBang_2" (2) Service-Type = Login-User (2) Cisco-AVPair = "service-type=Login" (2) Message-Authenticator = 0x7fb2f3f2dcf5521eb3f3fbe5e9da71ad (2) EAP-Message = 0x020400d21980000000c816030300c3010000bf030358fbac2b32952543a1c44b9b0996a1a1 a8d8507a68c411dc17909af45fe51e2520a864338413d80b83ee00b44b8e99570a944b46e3ef 8fd22fc0409e1b878a86f3003cc02cc02bc030c02f009f009ec024c023c028c027c00ac009c0 14c013003900 (2) NAS-Port-Type = Wireless-802.11 (2) NAS-Port = 625 (2) NAS-Port-Id = "625" (2) State = 0x8337d5108233cca62b010c57ecd141a1 (2) NAS-IP-Address = 10.160.134.40 (2) NAS-Identifier = "txweahomxp-ap1142001" (2) session-state: No cached attributes (2) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "Robby", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 4 length 210 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x8337d5108233cca6 (2) eap: Finished EAP session with state 0x8337d5108233cca6 (2) eap: Previous EAP request found for state 0x8337d5108233cca6, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 200 bytes (2) eap_peap: Got complete TLS record (200 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before/accept initialization (2) eap_peap: TLS_accept: before/accept initialization (2) eap_peap: <<< recv TLS 1.2 [length 00c3] (2) eap_peap: TLS_accept: SSLv3 read client hello A (2) eap_peap: >>> send TLS 1.2 [length 0059] (2) eap_peap: TLS_accept: SSLv3 write server hello A (2) eap_peap: >>> send TLS 1.2 [length 03e8] (2) eap_peap: TLS_accept: SSLv3 write certificate A (2) eap_peap: >>> send TLS 1.2 [length 014d] (2) eap_peap: TLS_accept: SSLv3 write key exchange A (2) eap_peap: >>> send TLS 1.2 [length 0004] (2) eap_peap: TLS_accept: SSLv3 write server done A (2) eap_peap: TLS_accept: SSLv3 flush data (2) eap_peap: TLS_accept: SSLv3 read client certificate A (2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (2) eap_peap: In SSL Handshake Phase (2) eap_peap: In SSL Accept mode (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 5 length 1004 (2) eap: EAP session adding &reply:State = 0x8337d5108132cca6 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) Sent Access-Challenge Id 129 from 10.160.134.60:1812 to 10.160.134.40:1645 length 0 (2) EAP-Message = 0x010503ec19c0000005a61603030059020000550303071820ee28d51600f472f17441b90fc6 3742989686d78cc2fc26571ef9c50f9c209922a163ea47f592fc458298194786a6ccd980f5df 6fb1abf5f33571cac52463c03000000dff01000100000b00040300010216030303e80b0003e4 0003e10003de (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x8337d5108132cca62b010c57ecd141a1 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 130 from 10.160.134.40:1645 to 10.160.134.60:1812 length 218 (3) User-Name = "Robby" (3) Framed-MTU = 1400 (3) Called-Station-Id = "0026.cba5.c330:BigBang_2" (3) Calling-Station-Id = "c8f7.334c.b878" (3) Cisco-AVPair = "ssid=BigBang_2" (3) Service-Type = Login-User (3) Cisco-AVPair = "service-type=Login" (3) Message-Authenticator = 0x41ff5998373abb1309bcc0e3ea37ed8f (3) EAP-Message = 0x020500061900 (3) NAS-Port-Type = Wireless-802.11 (3) NAS-Port = 625 (3) NAS-Port-Id = "625" (3) State = 0x8337d5108132cca62b010c57ecd141a1 (3) NAS-IP-Address = 10.160.134.40 (3) NAS-Identifier = "txweahomxp-ap1142001" (3) session-state: No cached attributes (3) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "Robby", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 5 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x8337d5108132cca6 (3) eap: Finished EAP session with state 0x8337d5108132cca6 (3) eap: Previous EAP request found for state 0x8337d5108132cca6, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 6 length 458 (3) eap: EAP session adding &reply:State = 0x8337d5108031cca6 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (3) Sent Access-Challenge Id 130 from 10.160.134.60:1812 to 10.160.134.40:1645 length 0 (3) EAP-Message = 0x010601ca1900397f45cadbce38bc8800d068245cda7603d379b834bf5b4e113ea6a8f410aa cb4df8b85adf8749a8be3778bccf80aabef10af4e29d7da239e1fc450c4227ab0e1265bd8049 d00483027ab10d1996480008c0286cfb73e4a06ee1b0cc555c2a6b2c004d81054fcefe8e1603 03014d0c0001 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x8337d5108031cca62b010c57ecd141a1 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 131 from 10.160.134.40:1645 to 10.160.134.60:1812 length 348 (4) User-Name = "Robby" (4) Framed-MTU = 1400 (4) Called-Station-Id = "0026.cba5.c330:BigBang_2" (4) Calling-Station-Id = "c8f7.334c.b878" (4) Cisco-AVPair = "ssid=BigBang_2" (4) Service-Type = Login-User (4) Cisco-AVPair = "service-type=Login" (4) Message-Authenticator = 0xd641c43d2204c044cfc9efddb3ed46a1 (4) EAP-Message = 0x0206008819800000007e16030300461000004241044ce03681389ff5ad25ca61a286c88298 ada26bf26f6b4e6eee223abc4ebc3273655a042aa3b8f16957a2f91d994694ba4fbfed625254 dcc4a84400667c4e63da1403030001011603030028000000000000000047a57d4600cdcf8279 b7679860ac44 (4) NAS-Port-Type = Wireless-802.11 (4) NAS-Port = 625 (4) NAS-Port-Id = "625" (4) State = 0x8337d5108031cca62b010c57ecd141a1 (4) NAS-IP-Address = 10.160.134.40 (4) NAS-Identifier = "txweahomxp-ap1142001" (4) session-state: No cached attributes (4) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "Robby", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 6 length 136 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x8337d5108031cca6 (4) eap: Finished EAP session with state 0x8337d5108031cca6 (4) eap: Previous EAP request found for state 0x8337d5108031cca6, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer indicated complete TLS record size will be 126 bytes (4) eap_peap: Got complete TLS record (126 bytes) (4) eap_peap: [eaptls verify] = length included (4) eap_peap: <<< recv TLS 1.2 [length 0046] (4) eap_peap: TLS_accept: SSLv3 read client key exchange A (4) eap_peap: TLS_accept: SSLv3 read certificate verify A (4) eap_peap: <<< recv TLS 1.2 [length 0001] (4) eap_peap: <<< recv TLS 1.2 [length 0010] (4) eap_peap: TLS_accept: SSLv3 read finished A (4) eap_peap: >>> send TLS 1.2 [length 0001] (4) eap_peap: TLS_accept: SSLv3 write change cipher spec A (4) eap_peap: >>> send TLS 1.2 [length 0010] (4) eap_peap: TLS_accept: SSLv3 write finished A (4) eap_peap: TLS_accept: SSLv3 flush data (4) eap_peap: (other): SSL negotiation finished successfully (4) eap_peap: SSL Connection Established (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 7 length 57 (4) eap: EAP session adding &reply:State = 0x8337d5108730cca6 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) Sent Access-Challenge Id 131 from 10.160.134.60:1812 to 10.160.134.40:1645 length 0 (4) EAP-Message = 0x010700391900140303000101160303002861b7a36a5561b04e9f0cb70e85700b387854eb41 320658261a5b77c113cbaefaa246556ea070a8a7 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x8337d5108730cca62b010c57ecd141a1 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 132 from 10.160.134.40:1645 to 10.160.134.60:1812 length 253 (5) User-Name = "Robby" (5) Framed-MTU = 1400 (5) Called-Station-Id = "0026.cba5.c330:BigBang_2" (5) Calling-Station-Id = "c8f7.334c.b878" (5) Cisco-AVPair = "ssid=BigBang_2" (5) Service-Type = Login-User (5) Cisco-AVPair = "service-type=Login" (5) Message-Authenticator = 0x44a35e8a6f92e7be41870a9ed32c7f04 (5) EAP-Message = 0x0207002919800000001f150303001a0000000000000001eea590d9939d70cefcd2bbceab89 b987c185 (5) NAS-Port-Type = Wireless-802.11 (5) NAS-Port = 625 (5) NAS-Port-Id = "625" (5) State = 0x8337d5108730cca62b010c57ecd141a1 (5) NAS-IP-Address = 10.160.134.40 (5) NAS-Identifier = "txweahomxp-ap1142001" (5) session-state: No cached attributes (5) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "Robby", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 7 length 41 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x8337d5108730cca6 (5) eap: Finished EAP session with state 0x8337d5108730cca6 (5) eap: Previous EAP request found for state 0x8337d5108730cca6, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 31 bytes (5) eap_peap: Got complete TLS record (31 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: <<< recv TLS 1.2 [length 0002] (5) eap_peap: ERROR: TLS Alert read:fatal:access denied (5) eap_peap: WARNING: No data inside of the tunnel (5) eap_peap: [eaptls process] = ok (5) eap_peap: Session established. Decoding tunneled attributes (5) eap_peap: PEAP state ? (5) eap_peap: ERROR: Tunneled data is invalid (5) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (5) eap: Sending EAP Failure (code 4) ID 7 length 4 (5) eap: Failed in EAP select (5) [eap] = invalid (5) } # authenticate = invalid (5) Failed to authenticate the user (5) Using Post-Auth-Type Reject (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (5) Post-Auth-Type REJECT { (5) attr_filter.access_reject: EXPAND %{User-Name} (5) attr_filter.access_reject: --> Robby (5) attr_filter.access_reject: Matched entry DEFAULT at line 11 (5) [attr_filter.access_reject] = updated (5) [eap] = noop (5) policy remove_reply_message_if_eap { (5) if (&reply:EAP-Message && &reply:Reply-Message) { (5) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (5) else { (5) [noop] = noop (5) } # else = noop (5) } # policy remove_reply_message_if_eap = noop (5) } # Post-Auth-Type REJECT = updated (5) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (5) Sending delayed response (5) Sent Access-Reject Id 132 from 10.160.134.60:1812 to 10.160.134.40:1645 length 44 (5) EAP-Message = 0x04070004 (5) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 127 with timestamp +17 (1) Cleaning up request packet ID 128 with timestamp +17 (2) Cleaning up request packet ID 129 with timestamp +17 (3) Cleaning up request packet ID 130 with timestamp +17 (4) Cleaning up request packet ID 131 with timestamp +17 (5) Cleaning up request packet ID 132 with timestamp +17 Ready to process requests Thanks. Rob Rutledge, CCNP CCDP

3 3

Setting up freeradius rlm_rest module
by chibwe kapambwe 22 Apr '17

22 Apr '17

Am a new ubuntu and freeradius user. Have setup freeradius on ubuntu 12, currently working fine with mysql db. I would like freeradius to work with a php REST API, so that a custom sql schema from the php application is used instead of the freeradius one. How can this be done? How do I setup the rlm_rest module to work work with a php REST API. If anyone could provide me with a step by step instructions I will be more than glad.

3 20

NSS vs OpenSSL
by Mark Williams 21 Apr '17

21 Apr '17

I’m working on a new FRS-3.0.13 config, and started getting errors from raddebug along the lines of "TLS: could not shutdown NSS…”. I remembered seeing some comments in the config files which suggested NSS resulted in fiery explosions and potential loss of limbs. A quick google search on the error messages turned up a few forum posts mentioning the exact messages I was getting, and even a link to some wiki commentary about the problem (and more mention of bad juju). http://wiki.freeradius.org/modules/Rlm_ldap#errors-with-ldap-over-tls-conne… Printing the shared library dependencies revealed the following: $ ldd /usr/lib64/libldap* | grep ssl libssl3.so => /lib64/libssl3.so (0x00007fefd95ea000) libssl3.so => /lib64/libssl3.so (0x00007f2df88bb000) libssl3.so => /lib64/libssl3.so (0x00007f3192055000) libssl3.so => /lib64/libssl3.so (0x00007fd99a617000) libssl3.so => /lib64/libssl3.so (0x00007f8bb0703000) libssl3.so => /lib64/libssl3.so (0x00007fb6b917c000) $ ldd /usr/lib64/libssl3.so linux-vdso.so.1 => (0x00007fff3abf6000) libnss3.so => /lib64/libnss3.so (0x00007f25c5a5b000) --> libnssutil3.so => /lib64/libnssutil3.so (0x00007f25c582e000) libplc4.so => /lib64/libplc4.so (0x00007f25c5629000) libplds4.so => /lib64/libplds4.so (0x00007f25c5425000) libnspr4.so => /lib64/libnspr4.so (0x00007f25c51e6000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f25c4fca000) libdl.so.2 => /lib64/libdl.so.2 (0x00007f25c4dc6000) libc.so.6 => /lib64/libc.so.6 (0x00007f25c4a04000) libz.so.1 => /lib64/libz.so.1 (0x00007f25c47ee000) librt.so.1 => /lib64/librt.so.1 (0x00007f25c45e6000) /lib64/ld-linux-x86-64.so.2 (0x00007f25c5fd0000) I could set lifetimes and timeouts for the ldap connections to zero, but that doesn’t really solve the problem. I’m still mastering the Linux environment, but I imagine that I could install libldap from source, compile it to use openssl, give it a new prefix, and then have FR use that library without conflicting with the rest of the system?? Am I on the correct path here? Has anyone here done something like this? ======================= Mark Williams markhw(a)vt.edu (2A83CAC8)

4 4

EAP-TLS from IKEv2 initiator
by Adam Bishop 21 Apr '17

21 Apr '17

Juniper have added proper EAP support to their VPN stack - I'm trying to get it working. I'm not trying to do anything fancy at this stage, just check that the client cert is signed by a CA. I've not deployed EAP-TLS before, so I could use a bit of help interpreting the TLS errors - the logs on the concentrator and on the client leave a little to be desired. It appears to be an issue with the CA being untrusted, but which side it is on - does the client distrust the FreeRADIUS server certificate, or does FreeRADIUS distrust the client's certificate? Regards, Adam Bishop gpg: E75B 1F92 6407 DFDF 9F1C BF10 C993 2504 6609 D460 jisc.ac.uk (33) Debug: Received Access-Request Id 72 from 172.25.0.176:52447 to 212.219.210.194:1812 length 95 (33) Debug: User-Name = "adambishop.dev.ja.net" (33) Debug: EAP-Message = 0x026f001a016164616d626973686f702e6465762e6a612e6e6574 (33) Debug: Message-Authenticator = 0x49c30bd1919131b5237affe9e97308c0 (33) Debug: NAS-IP-Address = 172.25.0.176 (33) Debug: # Executing section authorize from file /etc/raddb/sites-enabled/vpn (33) Debug: authorize { (33) Debug: update request { (33) Debug: } # update request = noop (33) Debug: [mschap] = noop (33) Debug: policy ntlm_auth.authorize { (33) Debug: if (!control:Auth-Type && User-Password) { (33) Debug: if (!control:Auth-Type && User-Password) -> FALSE (33) Debug: } # policy ntlm_auth.authorize = updated (33) Debug: vpn-eap: Peer sent EAP Response (code 2) ID 111 length 26 (33) Debug: vpn-eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (33) Debug: [vpn-eap] = ok (33) Debug: } # authorize = ok (33) Debug: Found Auth-Type = vpn-eap (33) Debug: # Executing group from file /etc/raddb/sites-enabled/vpn (33) Debug: Auth-Type vpn-eap { (33) Debug: vpn-eap: Peer sent packet with method EAP Identity (1) (33) Debug: vpn-eap: Calling submodule eap_tls to process data (33) Debug: eap_tls: Initiating new EAP-TLS session (33) Debug: eap_tls: Setting verify mode to require certificate from client (33) Debug: eap_tls: [eaptls start] = request (33) Debug: vpn-eap: Sending EAP Request (code 1) ID 112 length 6 (33) Debug: vpn-eap: EAP session adding &reply:State = 0x6aae3f2e6ade326b (33) Debug: [vpn-eap] = handled (33) Debug: if (handled && (Response-Packet-Type == Access-Challenge)) { (33) Debug: EXPAND Response-Packet-Type (33) Debug: --> Access-Challenge (33) Debug: if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (33) Debug: if (handled && (Response-Packet-Type == Access-Challenge)) { (33) Debug: attr_filter.access_challenge: EXPAND %{User-Name} (33) Debug: attr_filter.access_challenge: --> adambishop.dev.ja.net (33) Debug: attr_filter.access_challenge: Matched entry DEFAULT at line 12 (33) Debug: [attr_filter.access_challenge.post-auth] = updated (33) Debug: [handled] = handled (33) Debug: } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (33) Debug: } # Auth-Type vpn-eap = handled (33) Debug: Using Post-Auth-Type Challenge (33) Debug: Post-Auth-Type sub-section not found. Ignoring. (33) Debug: # Executing group from file /etc/raddb/sites-enabled/vpn (33) Debug: Sent Access-Challenge Id 72 from 212.219.210.194:1812 to 172.25.0.176:52447 length 0 (33) Debug: EAP-Message = 0x017000060d20 (33) Debug: Message-Authenticator = 0x00000000000000000000000000000000 (33) Debug: State = 0x6aae3f2e6ade326be20d66152c93ce20 (33) Debug: Finished request (34) Debug: Received Access-Request Id 73 from 172.25.0.176:52447 to 212.219.210.194:1812 length 214 (34) Debug: User-Name = "adambishop.dev.ja.net" (34) Debug: State = 0x6aae3f2e6ade326be20d66152c93ce20 (34) Debug: EAP-Message = 0x0270007f0d800000007516030100700100006c030158fa35e7494a8208f15734f1b156e5cfb33b722c8028e0ac4c5b609dbbaad4ed00002000ffc024c023c00ac009c008c028c027c014c013c012003d003c0035002f000a01000023000a00080006001700180019000b00020100000500050100000000 (34) Debug: Message-Authenticator = 0xe0ffa2f9a4f35bb9c59822b730acb0b7 (34) Debug: NAS-IP-Address = 172.25.0.176 (34) Debug: session-state: No cached attributes (34) Debug: # Executing section authorize from file /etc/raddb/sites-enabled/vpn (34) Debug: authorize { (34) Debug: update request { (34) Debug: } # update request = noop (34) Debug: [mschap] = noop (34) Debug: policy ntlm_auth.authorize { (34) Debug: if (!control:Auth-Type && User-Password) { (34) Debug: if (!control:Auth-Type && User-Password) -> FALSE (34) Debug: } # policy ntlm_auth.authorize = updated (34) Debug: vpn-eap: Peer sent EAP Response (code 2) ID 112 length 127 (34) Debug: vpn-eap: No EAP Start, assuming it's an on-going EAP conversation (34) Debug: [vpn-eap] = updated (34) Debug: } # authorize = updated (34) Debug: Found Auth-Type = vpn-eap (34) Debug: # Executing group from file /etc/raddb/sites-enabled/vpn (34) Debug: Auth-Type vpn-eap { (34) Debug: vpn-eap: Expiring EAP session with state 0x6aae3f2e6ade326b (34) Debug: vpn-eap: Finished EAP session with state 0x6aae3f2e6ade326b (34) Debug: vpn-eap: Previous EAP request found for state 0x6aae3f2e6ade326b, released from the list (34) Debug: vpn-eap: Peer sent packet with method EAP TLS (13) (34) Debug: vpn-eap: Calling submodule eap_tls to process data (34) Debug: eap_tls: Continuing EAP-TLS (34) Debug: eap_tls: Peer indicated complete TLS record size will be 117 bytes (34) Debug: eap_tls: Got complete TLS record (117 bytes) (34) Debug: eap_tls: [eaptls verify] = length included (34) Debug: eap_tls: (other): before/accept initialization (34) Debug: eap_tls: TLS_accept: before/accept initialization (34) Debug: eap_tls: TLS_accept: SSLv3 read client hello A (34) Debug: eap_tls: TLS_accept: SSLv3 write server hello A (34) Debug: eap_tls: TLS_accept: SSLv3 write certificate A (34) Debug: eap_tls: TLS_accept: SSLv3 write key exchange A (34) Debug: eap_tls: TLS_accept: SSLv3 write certificate request A (34) Debug: eap_tls: TLS_accept: SSLv3 flush data (34) Debug: eap_tls: TLS_accept: Need to read more data: SSLv3 read client certificate A (34) Debug: eap_tls: TLS_accept: Need to read more data: SSLv3 read client certificate A (34) Debug: eap_tls: In SSL Handshake Phase (34) Debug: eap_tls: In SSL Accept mode (34) Debug: eap_tls: [eaptls process] = handled (34) Debug: vpn-eap: Sending EAP Request (code 1) ID 113 length 1024 (34) Debug: vpn-eap: EAP session adding &reply:State = 0x6aae3f2e6bdf326b (34) Debug: [vpn-eap] = handled (34) Debug: if (handled && (Response-Packet-Type == Access-Challenge)) { (34) Debug: EXPAND Response-Packet-Type (34) Debug: --> Access-Challenge (34) Debug: if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (34) Debug: if (handled && (Response-Packet-Type == Access-Challenge)) { (34) Debug: attr_filter.access_challenge: EXPAND %{User-Name} (34) Debug: attr_filter.access_challenge: --> adambishop.dev.ja.net (34) Debug: attr_filter.access_challenge: Matched entry DEFAULT at line 12 (34) Debug: [attr_filter.access_challenge.post-auth] = updated (34) Debug: [handled] = handled (34) Debug: } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (34) Debug: } # Auth-Type vpn-eap = handled (34) Debug: Using Post-Auth-Type Challenge (34) Debug: Post-Auth-Type sub-section not found. Ignoring. (34) Debug: # Executing group from file /etc/raddb/sites-enabled/vpn (34) Debug: Sent Access-Challenge Id 73 from 212.219.210.194:1812 to 172.25.0.176:52447 length 0 (34) Debug: EAP-Message = 0x017104000dc000000ee6160301005902000055030158fa35e7aba06da2f649d15b2f089f33f9657525d4ea7fbe38c0683b6d562b0d204c1a18aa8cc88018d71230199577025e1582f0af81dbdc9ec817bb59968b8b07c01400000dff01000100000b0004030001021603010b980b000b94000b910005bd (34) Debug: Message-Authenticator = 0x00000000000000000000000000000000 (34) Debug: State = 0x6aae3f2e6bdf326be20d66152c93ce20 (34) Debug: Finished request (35) Debug: Received Access-Request Id 74 from 172.25.0.176:52447 to 212.219.210.194:1812 length 93 (35) Debug: User-Name = "adambishop.dev.ja.net" (35) Debug: State = 0x6aae3f2e6bdf326be20d66152c93ce20 (35) Debug: EAP-Message = 0x027100060d00 (35) Debug: Message-Authenticator = 0xa0a4c2467a10884786f7e69f8629f39d (35) Debug: NAS-IP-Address = 172.25.0.176 (35) Debug: session-state: No cached attributes (35) Debug: # Executing section authorize from file /etc/raddb/sites-enabled/vpn (35) Debug: authorize { (35) Debug: update request { (35) Debug: } # update request = noop (35) Debug: [mschap] = noop (35) Debug: policy ntlm_auth.authorize { (35) Debug: if (!control:Auth-Type && User-Password) { (35) Debug: if (!control:Auth-Type && User-Password) -> FALSE (35) Debug: } # policy ntlm_auth.authorize = updated (35) Debug: vpn-eap: Peer sent EAP Response (code 2) ID 113 length 6 (35) Debug: vpn-eap: No EAP Start, assuming it's an on-going EAP conversation (35) Debug: [vpn-eap] = updated (35) Debug: } # authorize = updated (35) Debug: Found Auth-Type = vpn-eap (35) Debug: # Executing group from file /etc/raddb/sites-enabled/vpn (35) Debug: Auth-Type vpn-eap { (35) Debug: vpn-eap: Expiring EAP session with state 0x6aae3f2e6bdf326b (35) Debug: vpn-eap: Finished EAP session with state 0x6aae3f2e6bdf326b (35) Debug: vpn-eap: Previous EAP request found for state 0x6aae3f2e6bdf326b, released from the list (35) Debug: vpn-eap: Peer sent packet with method EAP TLS (13) (35) Debug: vpn-eap: Calling submodule eap_tls to process data (35) Debug: eap_tls: Continuing EAP-TLS (35) Debug: eap_tls: Peer ACKed our handshake fragment (35) Debug: eap_tls: [eaptls verify] = request (35) Debug: eap_tls: [eaptls process] = handled (35) Debug: vpn-eap: Sending EAP Request (code 1) ID 114 length 1024 (35) Debug: vpn-eap: EAP session adding &reply:State = 0x6aae3f2e68dc326b (35) Debug: [vpn-eap] = handled (35) Debug: if (handled && (Response-Packet-Type == Access-Challenge)) { (35) Debug: EXPAND Response-Packet-Type (35) Debug: --> Access-Challenge (35) Debug: if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (35) Debug: if (handled && (Response-Packet-Type == Access-Challenge)) { (35) Debug: attr_filter.access_challenge: EXPAND %{User-Name} (35) Debug: attr_filter.access_challenge: --> adambishop.dev.ja.net (35) Debug: attr_filter.access_challenge: Matched entry DEFAULT at line 12 (35) Debug: [attr_filter.access_challenge.post-auth] = updated (35) Debug: [handled] = handled (35) Debug: } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (35) Debug: } # Auth-Type vpn-eap = handled (35) Debug: Using Post-Auth-Type Challenge (35) Debug: Post-Auth-Type sub-section not found. Ignoring. (35) Debug: # Executing group from file /etc/raddb/sites-enabled/vpn (35) Debug: Sent Access-Challenge Id 74 from 212.219.210.194:1812 to 172.25.0.176:52447 length 0 (35) Debug: EAP-Message = 0x017204000dc000000ee67073312e6465762e6a612e6e657482106f727073322e6465762e6a612e6e6574300d06092a864886f70d01010b050003820201003538a5bfb66c1d80c153bea4bde8797b5771787c349c00a0afb3007452b8263dcfe5f33e97a63b77a618acc517c74bc965a5636510377123aa (35) Debug: Message-Authenticator = 0x00000000000000000000000000000000 (35) Debug: State = 0x6aae3f2e68dc326be20d66152c93ce20 (35) Debug: Finished request (36) Debug: Received Access-Request Id 75 from 172.25.0.176:52447 to 212.219.210.194:1812 length 93 (36) Debug: User-Name = "adambishop.dev.ja.net" (36) Debug: State = 0x6aae3f2e68dc326be20d66152c93ce20 (36) Debug: EAP-Message = 0x027200060d00 (36) Debug: Message-Authenticator = 0x30592ba50305fc9c46f668bdff6e0501 (36) Debug: NAS-IP-Address = 172.25.0.176 (36) Debug: session-state: No cached attributes (36) Debug: # Executing section authorize from file /etc/raddb/sites-enabled/vpn (36) Debug: authorize { (36) Debug: update request { (36) Debug: } # update request = noop (36) Debug: [mschap] = noop (36) Debug: policy ntlm_auth.authorize { (36) Debug: if (!control:Auth-Type && User-Password) { (36) Debug: if (!control:Auth-Type && User-Password) -> FALSE (36) Debug: } # policy ntlm_auth.authorize = updated (36) Debug: vpn-eap: Peer sent EAP Response (code 2) ID 114 length 6 (36) Debug: vpn-eap: No EAP Start, assuming it's an on-going EAP conversation (36) Debug: [vpn-eap] = updated (36) Debug: } # authorize = updated (36) Debug: Found Auth-Type = vpn-eap (36) Debug: # Executing group from file /etc/raddb/sites-enabled/vpn (36) Debug: Auth-Type vpn-eap { (36) Debug: vpn-eap: Expiring EAP session with state 0x6aae3f2e68dc326b (36) Debug: vpn-eap: Finished EAP session with state 0x6aae3f2e68dc326b (36) Debug: vpn-eap: Previous EAP request found for state 0x6aae3f2e68dc326b, released from the list (36) Debug: vpn-eap: Peer sent packet with method EAP TLS (13) (36) Debug: vpn-eap: Calling submodule eap_tls to process data (36) Debug: eap_tls: Continuing EAP-TLS (36) Debug: eap_tls: Peer ACKed our handshake fragment (36) Debug: eap_tls: [eaptls verify] = request (36) Debug: eap_tls: [eaptls process] = handled (36) Debug: vpn-eap: Sending EAP Request (code 1) ID 115 length 1024 (36) Debug: vpn-eap: EAP session adding &reply:State = 0x6aae3f2e69dd326b (36) Debug: [vpn-eap] = handled (36) Debug: if (handled && (Response-Packet-Type == Access-Challenge)) { (36) Debug: EXPAND Response-Packet-Type (36) Debug: --> Access-Challenge (36) Debug: if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (36) Debug: if (handled && (Response-Packet-Type == Access-Challenge)) { (36) Debug: attr_filter.access_challenge: EXPAND %{User-Name} (36) Debug: attr_filter.access_challenge: --> adambishop.dev.ja.net (36) Debug: attr_filter.access_challenge: Matched entry DEFAULT at line 12 (36) Debug: [attr_filter.access_challenge.post-auth] = updated (36) Debug: [handled] = handled (36) Debug: } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (36) Debug: } # Auth-Type vpn-eap = handled (36) Debug: Using Post-Auth-Type Challenge (36) Debug: Post-Auth-Type sub-section not found. Ignoring. (36) Debug: # Executing group from file /etc/raddb/sites-enabled/vpn (36) Debug: Sent Access-Challenge Id 75 from 212.219.210.194:1812 to 172.25.0.176:52447 length 0 (36) Debug: EAP-Message = 0x017304000dc000000ee6a8a10366b1a69070f32e9c2285917ba83b5fa6d7c9d736385ae3a898a989b4868c713e653962ef9c0e7842f3eb3597fbb63b193af9330d984af5dbed07fe8271963a833187f2c99189b6001b54a8e3cc4fda9f07abeb2c3f8d9701bbd0de99a0781ad8cf5ef90ba0cbd528ecbd (36) Debug: Message-Authenticator = 0x00000000000000000000000000000000 (36) Debug: State = 0x6aae3f2e69dd326be20d66152c93ce20 (36) Debug: Finished request (37) Debug: Received Access-Request Id 76 from 172.25.0.176:52447 to 212.219.210.194:1812 length 93 (37) Debug: User-Name = "adambishop.dev.ja.net" (37) Debug: State = 0x6aae3f2e69dd326be20d66152c93ce20 (37) Debug: EAP-Message = 0x027300060d00 (37) Debug: Message-Authenticator = 0xf2e97357da0c1ddd3ce4e45675dc4c85 (37) Debug: NAS-IP-Address = 172.25.0.176 (37) Debug: session-state: No cached attributes (37) Debug: # Executing section authorize from file /etc/raddb/sites-enabled/vpn (37) Debug: authorize { (37) Debug: update request { (37) Debug: } # update request = noop (37) Debug: [mschap] = noop (37) Debug: policy ntlm_auth.authorize { (37) Debug: if (!control:Auth-Type && User-Password) { (37) Debug: if (!control:Auth-Type && User-Password) -> FALSE (37) Debug: } # policy ntlm_auth.authorize = updated (37) Debug: vpn-eap: Peer sent EAP Response (code 2) ID 115 length 6 (37) Debug: vpn-eap: No EAP Start, assuming it's an on-going EAP conversation (37) Debug: [vpn-eap] = updated (37) Debug: } # authorize = updated (37) Debug: Found Auth-Type = vpn-eap (37) Debug: # Executing group from file /etc/raddb/sites-enabled/vpn (37) Debug: Auth-Type vpn-eap { (37) Debug: vpn-eap: Expiring EAP session with state 0x6aae3f2e69dd326b (37) Debug: vpn-eap: Finished EAP session with state 0x6aae3f2e69dd326b (37) Debug: vpn-eap: Previous EAP request found for state 0x6aae3f2e69dd326b, released from the list (37) Debug: vpn-eap: Peer sent packet with method EAP TLS (13) (37) Debug: vpn-eap: Calling submodule eap_tls to process data (37) Debug: eap_tls: Continuing EAP-TLS (37) Debug: eap_tls: Peer ACKed our handshake fragment (37) Debug: eap_tls: [eaptls verify] = request (37) Debug: eap_tls: [eaptls process] = handled (37) Debug: vpn-eap: Sending EAP Request (code 1) ID 116 length 782 (37) Debug: vpn-eap: EAP session adding &reply:State = 0x6aae3f2e6eda326b (37) Debug: [vpn-eap] = handled (37) Debug: if (handled && (Response-Packet-Type == Access-Challenge)) { (37) Debug: EXPAND Response-Packet-Type (37) Debug: --> Access-Challenge (37) Debug: if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (37) Debug: if (handled && (Response-Packet-Type == Access-Challenge)) { (37) Debug: attr_filter.access_challenge: EXPAND %{User-Name} (37) Debug: attr_filter.access_challenge: --> adambishop.dev.ja.net (37) Debug: attr_filter.access_challenge: Matched entry DEFAULT at line 12 (37) Debug: [attr_filter.access_challenge.post-auth] = updated (37) Debug: [handled] = handled (37) Debug: } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (37) Debug: } # Auth-Type vpn-eap = handled (37) Debug: Using Post-Auth-Type Challenge (37) Debug: Post-Auth-Type sub-section not found. Ignoring. (37) Debug: # Executing group from file /etc/raddb/sites-enabled/vpn (37) Debug: Sent Access-Challenge Id 76 from 212.219.210.194:1812 to 172.25.0.176:52447 length 0 (37) Debug: EAP-Message = 0x0174030e0d8000000ee6a8e258b211b12d7b809f6b1bde4c3b17448fcecde979c5af6b160301024b0c0002470300174104fca4d3a30ab92336ed8b6d06067e419da55aaed97101b578e7fc14b09dfa959c3f9532ae1699fedcf0e48443395cb523fb353bc312cd99b96436c8fb52730dde02002046f7c3 (37) Debug: Message-Authenticator = 0x00000000000000000000000000000000 (37) Debug: State = 0x6aae3f2e6eda326be20d66152c93ce20 (37) Debug: Finished request (38) Debug: Received Access-Request Id 77 from 172.25.0.176:52447 to 212.219.210.194:1812 length 104 (38) Debug: User-Name = "adambishop.dev.ja.net" (38) Debug: State = 0x6aae3f2e6eda326be20d66152c93ce20 (38) Debug: EAP-Message = 0x027400110d800000000715030100020100 (38) Debug: Message-Authenticator = 0x525697ff8dd586a2947f27df10721084 (38) Debug: NAS-IP-Address = 172.25.0.176 (38) Debug: session-state: No cached attributes (38) Debug: # Executing section authorize from file /etc/raddb/sites-enabled/vpn (38) Debug: authorize { (38) Debug: update request { (38) Debug: } # update request = noop (38) Debug: [mschap] = noop (38) Debug: policy ntlm_auth.authorize { (38) Debug: if (!control:Auth-Type && User-Password) { (38) Debug: if (!control:Auth-Type && User-Password) -> FALSE (38) Debug: } # policy ntlm_auth.authorize = updated (38) Debug: vpn-eap: Peer sent EAP Response (code 2) ID 116 length 17 (38) Debug: vpn-eap: No EAP Start, assuming it's an on-going EAP conversation (38) Debug: [vpn-eap] = updated (38) Debug: } # authorize = updated (38) Debug: Found Auth-Type = vpn-eap (38) Debug: # Executing group from file /etc/raddb/sites-enabled/vpn (38) Debug: Auth-Type vpn-eap { (38) Debug: vpn-eap: Expiring EAP session with state 0x6aae3f2e6eda326b (38) Debug: vpn-eap: Finished EAP session with state 0x6aae3f2e6eda326b (38) Debug: vpn-eap: Previous EAP request found for state 0x6aae3f2e6eda326b, released from the list (38) Debug: vpn-eap: Peer sent packet with method EAP TLS (13) (38) Debug: vpn-eap: Calling submodule eap_tls to process data (38) Debug: eap_tls: Continuing EAP-TLS (38) Debug: eap_tls: Peer indicated complete TLS record size will be 7 bytes (38) Debug: eap_tls: Got complete TLS record (7 bytes) (38) Debug: eap_tls: [eaptls verify] = length included (38) ERROR: eap_tls: TLS_accept: Failed in SSLv3 read client certificate A (38) ERROR: eap_tls: Failed in __FUNCTION__ (SSL_read): error:140940E5:SSL routines:SSL3_READ_BYTES:ssl handshake failure (38) ERROR: eap_tls: System call (I/O) error (-1) (38) ERROR: eap_tls: TLS receive handshake failed during operation (38) ERROR: eap_tls: [eaptls process] = fail (38) ERROR: vpn-eap: Failed continuing EAP TLS (13) session. EAP sub-module failed (38) Debug: vpn-eap: Sending EAP Failure (code 4) ID 116 length 4 (38) Debug: vpn-eap: Failed in EAP select (38) Debug: [vpn-eap] = invalid (38) Debug: } # Auth-Type vpn-eap = invalid (38) Debug: Failed to authenticate the user (38) Debug: Using Post-Auth-Type Reject (38) Debug: # Executing group from file /etc/raddb/sites-enabled/vpn (38) Debug: Post-Auth-Type REJECT { (38) Debug: attr_filter.access_reject: EXPAND %{User-Name} (38) Debug: attr_filter.access_reject: --> adambishop.dev.ja.net (38) Debug: attr_filter.access_reject: Matched entry DEFAULT at line 11 (38) Debug: [attr_filter.access_reject] = updated (38) Debug: [eap] = noop (38) Debug: rp_log: EXPAND rp_log.%{%{reply:Packet-Type}:-format} (38) Debug: rp_log: --> rp_log.Access-Reject (38) Debug: rp_log: EXPAND radiusd-rp-log#DOMAIN=DEV#LOCATION=LH#SERVICE=%{%{Service-Class}:-NONE}#ORG=%{%{request:operator-name}:-%{request:Stripped-User-Domain}}#USER=%{User-Name}#CSI=%{Calling-Station-Id}#NAS=%{Called-Station-Id}#CUI=%{reply:Chargeable-User-Identity}#RESULT=FAIL#VLAN=%{%{reply:Tunnel-Private-Group-ID}:-NONE}#CLIENT=%{client:shortname}#REPLY_MESSAGE=%{%{reply:reply-message}:-NONE}#MODULE_MESSAGE=%{%{%{request:Module-Failure-Message}:-%{session-state:Module-Failure-Message}}:-NONE}# (38) Fri Apr 21 16:40:07 2017: Debug: rp_log: --> radiusd-rp-log#DOMAIN=DEV#LOCATION=LH#SERVICE=vpn#ORG=#USER=adambishop.dev.ja.net#CSI=#NAS=#CUI=#RESULT=FAIL#VLAN=NONE#CLIENT=castle-black.djn#REPLY_MESSAGE=NONE#MODULE_MESSAGE=eap_tls: TLS_accept: Failed in SSLv3 read client certificate A# (38) Debug: [rp_log] = ok (38) Debug: policy remove_reply_message_if_eap { (38) Debug: if (&reply:EAP-Message && &reply:Reply-Message) { (38) Debug: if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (38) Debug: else { (38) Debug: [noop] = noop (38) Debug: } # else = noop (38) Debug: } # policy remove_reply_message_if_eap = noop (38) Debug: } # Post-Auth-Type REJECT = updated (38) Debug: Delaying response for 1.000000 seconds (38) Debug: Sending delayed response (38) Debug: Sent Access-Reject Id 77 from 212.219.210.194:1812 to 172.25.0.176:52447 length 44 (38) Debug: EAP-Message = 0x04740004 (38) Debug: Message-Authenticator = 0x00000000000000000000000000000000 --- # radiusd -C -X FreeRADIUS Version 3.0.13 Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... <snip> main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 60 cleanup_delay = 10 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "CVE-2016-6304" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } realm LOCAL { nostrip } <snip> realm dev.ja.net { } radiusd: #### Loading Clients #### <snip> client 172.25.0.176 { ipaddr = 172.25.0.176 require_message_authenticator = yes secret = <<< secret >>> shortname = "castle-black.djn" nas_type = "other" virtual_server = "vpn" proto = "udp" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } <snip> Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = PAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = eap # Creating Autz-Type = Status-Server # Creating Auth-Type = inner-eap # Creating Auth-Type = ntlm_auth # Creating Auth-Type = VPN # Creating Auth-Type = vpn-eap radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no default_community = "none" rp_realm = "none" trust_router = "none" tr_port = 0 } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no default_community = "none" rp_realm = "none" trust_router = "none" tr_port = 0 } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no default_community = "none" rp_realm = "none" trust_router = "none" tr_port = 0 } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no default_community = "none" rp_realm = "none" trust_router = "none" tr_port = 0 } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = yes require_strong = yes with_ntdomain_hack = yes passchange { } allow_retry = yes retry_msg = "Your credentials were not accepted, please try again" winbind_retry_with_normalised_username = yes } # Loading module "inner-eap" from file /etc/raddb/mods-enabled/inner-eap eap inner-eap { default_eap_type = "mschapv2" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=DEV --username=%{%{Stripped-User-Name}:-%{mschap:User-Name}} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_redis # Loading module "redis" from file /etc/raddb/mods-enabled/redis redis { server = "127.0.0.1" port = 6379 database = 0 password = <<< secret >>> } rlm_redis: libhiredis version: 0.12.1 # Loading module "idp_log" from file /etc/raddb/mods-enabled/idp_log linelog idp_log { filename = "syslog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "idp_log.%{%{reply:Packet-Type}:-format}" } # Loading module "rp_log" from file /etc/raddb/mods-enabled/rp_log linelog rp_log { filename = "syslog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "rp_log.%{%{reply:Packet-Type}:-format}" } # Loading module "vpn-eap" from file /etc/raddb/mods-enabled/vpn-eap eap vpn-eap { default_eap_type = "tls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs.d/DEV/server.pem" certificate_file = "/etc/raddb/certs.d/DEV/server.crt" dh_file = "/etc/raddb/certs.d/DEV/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = yes check_all_crl = yes cipher_list = "DEFAULT" cipher_server_preference = yes ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 name = "Default EAP Cache" max_entries = 16384 persist_dir = "/var/lib/radiusd/tlscache" } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = no use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = yes } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 86400 cleanup_interval = 300 idle_timeout = 600 retry_delay = 30 spread = no } rlm_mschap (mschap): authenticating directly to winbind # Instantiating module "inner-eap" from file /etc/raddb/mods-enabled/inner-eap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = yes } # Instantiating module "redis" from file /etc/raddb/mods-enabled/redis rlm_redis (redis): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 86400 cleanup_interval = 300 idle_timeout = 0 retry_delay = 10 spread = no } # Instantiating module "idp_log" from file /etc/raddb/mods-enabled/idp_log # Instantiating module "rp_log" from file /etc/raddb/mods-enabled/rp_log # Instantiating module "vpn-eap" from file /etc/raddb/mods-enabled/vpn-eap # Linked to sub-module rlm_eap_tls tls { tls = "vpn-tls" } tls-config vpn-tls { verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs.d/DEV/vpn/server.pem" certificate_file = "/etc/raddb/certs.d/DEV/vpn/server.crt" ca_file = "/etc/raddb/certs.d/DEV/vpn/ca/root.crt" dh_file = "/etc/raddb/certs.d/DEV/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = yes check_all_crl = yes cipher_list = "DEFAULT" cipher_server_preference = yes ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 name = "Default EAP VPN Cache" max_entries = 16384 persist_dir = "/var/lib/radiusd/tlscache" } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = no use_nonce = yes timeout = 0 softfail = no } } } # modules Jisc is a registered charity (number 1149740) and a company limited by guarantee which is registered in England under Company No. 5747339, VAT No. GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, Bristol, BS2 0JA. T 0203 697 5800. Jisc Services Limited is a wholly owned Jisc subsidiary and a company limited by guarantee which is registered in England under company number 2881024, VAT number GB 197 0632 86. The registered office is: One Castle Park, Tower Hill, Bristol BS2 0JA. T 0203 697 5800.

2 1

Re: freeradius 3.0.13 refusing to start with Heartbleed-unaffected OpenSSL version
by Konstantin Knaab-Hinrichs 21 Apr '17

21 Apr '17

I compiled OpenSSL 1.0.2k from source with make. Then I make install'ed it. Just because "apt-get install --only-upgrade openssl" and I hadn't thought of using apt-get to install an older version. I'll try to rebuild it with the disable-openssl option next monday. It wasn't documented in the "custom install" section Install.rst of the source download... Thanks for the detailed info.

1 0

update reply with multiple attributes from mysql table
by Little Snooze 21 Apr '17

21 Apr '17

Hello, I'm running freeradius v3.0.4 (and can't run later version). I would like to update reply with all attributes concerning a specific user, from a mysql table. Is there a way to do that? I tried this solution, found in previous post, in this mailing list: update control { Tmp-String-0 := "%{sql:SELECT CONCAT(attribute,'#',op,'#',value) from specreply2lns where username = '%{User-Name}'}" } if ("%{explode:&control:Tmp-String-0 #}" > 0) { foreach &control:Tmp-String-0 { if ("%{Foreach-Variable-0}" =~ /^([^=]+)=(.*)$/) { update reply { "%{1}" "%{2}" "%{3}" } } } } pb is "explode" module doesn't available in earlier version of FR 3.0.7 :-( Is there a way to do that in unlang and FR V3.0.4? Many thanks,

3 4

mysql schema
by chibwe kapambwe 21 Apr '17

21 Apr '17

Hello Am a student trying to learn more about RADIUS server, specifically freeradius. Have a home lab setup were am busy experimenting with freeradius. My question is, can one create their own mysql schema for freeradius, or it can only work with the provided schema? How do you configure freeradius to use different tables for accounting especially. One other question is, how can freeradius insert a foreign key into a table. Am asking this because i would like to add a field to the accounting table which is linked to another primary key. regards bwex

3 2