May 2017 - Freeradius-Users - lists.freeradius.org

Bootstrap portion of 'make install'
by Coy Hile 10 May '17

10 May '17

Hi all, I’m trying to incorporate FreeRADIUS 3 into pkgsrc. In looking at the spec file in https://github.com/FreeRADIUS/freeradius-server/blob/v4.0.x/redhat/freeradi… one sees an RPM post-install script that calls /etc/raddb/certs/bootstrap if needed. Clearly, if one were actually running ‘make install’ in production, that work would be necessary as the Makefile does it. However, if one is building a package, that step in ‘raddb/all.mk’ seems superfluous, and means that one need remove a bunch of ephemeral files from the DESTDIR before packaging. Rather than having my package build framework let the bootstrap run in the DESTDIR and nuke the artifacts it creates before packaging, is there some setting one can tweak to skip that bootstrap as part of make install? Thanks — Coy Hile coy.hile(a)coyhile.com

2 2

free radius Not able to add clients from nas table mysql
by avnel vernon 10 May '17

10 May '17

On Wed, May 10, 2017 at 3:30 PM, < freeradius-users-request(a)lists.freeradius.org> wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Re: TLS Variables not set (Yusuf Siddiqui) > 2. Re: free radius Not able to add clients from nas table mysql > (Alan DeKok) > 3. Bootstrap portion of 'make install' (Coy Hile) > 4. Re: Bootstrap portion of 'make install' (Alan DeKok) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 9 May 2017 17:31:42 +0530 > From: Yusuf Siddiqui <joseph490(a)gmail.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: TLS Variables not set > Message-ID: > <CACx-Ti1nZ-S1uEJ84qa-3U77T_L-VSGWdjdBXGu45M0HpejCWA@mail. > gmail.com> > Content-Type: text/plain; charset=UTF-8 > > Congrats! :-) > > > > Regards > Mohd Yusuf Siddiqui > email: yusuf.siddiqui(a)fiyutech.com > www. <http://www.ibots.org/>fiyutech.com > Mob. +91.991.033.914.3,+91.989.102.455.4 > Off:+91.120. > > 49.89.65.4 > U.S. +120.975.347.57 > > *___________________________________________________________ > ____________________________________________________________ > ___________________________________________* > > This communication & accompanying documents ("this e-mail") contains > confidential and/or privileged information for exclusive use of the > individual > to whom it is addressed. If you are not the intended recipient, please > immediately notify the company & delete this e-mail. Any unauthorized use > or disclosure of this e-mail is strictly prohibited. Representations in > this > e-mail are subject to contract. As an e-mail user please be cautious of the > technical & other vulnerabilities of the internet which may result in > malicious > and/or unauthorized access to / use / alteration of e-mails/e-mail IDs. > Thank you. > > *___________________________________________________________ > ____________________________________________________________ > ________________________________________* > > On Tue, May 9, 2017 at 10:14 AM, Luke Pascoe <luke(a)osnz.co.nz> wrote: > > > Finally got around to building 3.0.13 for CentOS 7, and yes, the problem > is > > now fixed. > > > > Thanks. > > > > Luke Pascoe > > > > > > > > *E* luke(a)osnz.co.nz > > * P* +64 (9) 296 2961 > > * M* +64 (27) 426 6649 > > * W* www.osnz.co.nz > > > > 24 Wellington St > > Papakura > > Auckland, 2110 > > New Zealand > > > > On 22 April 2017 at 00:56, Alan DeKok <aland(a)deployingradius.com> wrote: > > > > > On Apr 20, 2017, at 11:28 PM, Luke Pascoe <luke(a)osnz.co.nz> wrote: > > > > > > > > Hi, > > > > > > > > I'm having trouble getting some basic TLS checks working for a Wifi > > > EAP-TLS > > > > connection. > > > > > > > > Centos7, freeradius 3.0.4 > > > > > > Use 3.0.13. > > > > > > Alan DeKok. > > > > > > - > > > List info/subscribe/unsubscribe? See http://www.freeradius.org/ > > > list/users.html > > - > > List info/subscribe/unsubscribe? See http://www.freeradius.org/ > > list/users.html > > > ------------------------------ > > Message: 2 > Date: Tue, 9 May 2017 08:58:37 -0400 > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: free radius Not able to add clients from nas table mysql > Message-ID: <9361521E-4EFA-4EBF-A3D0-F014241BFC03(a)deployingradius.com> > Content-Type: text/plain; charset=us-ascii > > On May 9, 2017, at 7:08 AM, avnel vernon <avnelvernon(a)gmail.com> wrote: > > > > [root@localhost ~]# radiusd -X > > radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, > built > > Upgrade. > > > rlm_sql (sql): Executing query: 'SELECT id, nasname, shortname, type, > > secret, server FROM nas' > > rlm_sql (sql): Adding client zd (zd) to 192.168.1.173 clients list > > ip_hton: Name or service not known > > Something in your local system is broken. I've never seen this issue > before. > > Upgrade. > > Alan DeKok. > > > > > > ------------------------------ > > Message: 3 > Date: Tue, 9 May 2017 20:48:30 -0400 > From: Coy Hile <coy.hile(a)coyhile.com> > To: freeradius-users(a)lists.freeradius.org > Subject: Bootstrap portion of 'make install' > Message-ID: <B2E81B39-0DCF-49BB-AD52-7BA8FFF5F213(a)coyhile.com> > Content-Type: text/plain; charset=utf-8 > > Hi all, > > I’m trying to incorporate FreeRADIUS 3 into pkgsrc. > > > In looking at the spec file in > > https://github.com/FreeRADIUS/freeradius-server/blob/v4.0.x/ > redhat/freeradius.spec > > one sees an RPM post-install script that calls /etc/raddb/certs/bootstrap > if needed. Clearly, if one were actually running ‘make install’ in > production, that work would be necessary as the Makefile does it. However, > if one is building a package, that step in ‘raddb/all.mk’ seems > superfluous, and means that one need remove a bunch of ephemeral files from > the DESTDIR before packaging. > > Rather than having my package build framework let the bootstrap run in the > DESTDIR and nuke the artifacts it creates before packaging, is there some > setting one can tweak to skip that bootstrap as part of make install? > > Thanks > > — > Coy Hile > coy.hile(a)coyhile.com > > > ------------------------------ > > Message: 4 > Date: Tue, 9 May 2017 21:29:16 -0400 > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: Bootstrap portion of 'make install' > Message-ID: <C73D6587-E5A4-4DD2-BB67-E034FBEC46C6(a)deployingradius.com> > Content-Type: text/plain; charset=utf-8 > > On May 9, 2017, at 8:48 PM, Coy Hile <coy.hile(a)coyhile.com> wrote: > > In looking at the spec file in > > > > https://github.com/FreeRADIUS/freeradius-server/blob/v4.0.x/ > redhat/freeradius.spec > > > > one sees an RPM post-install script that calls > /etc/raddb/certs/bootstrap if needed. Clearly, if one were actually > running ‘make install’ in production, that work would be necessary as the > Makefile does it. However, if one is building a package, that step in > ‘raddb/all.mk’ seems superfluous, and means that one need remove a bunch > of ephemeral files from the DESTDIR before packaging. > > Yes. That's why you can do: > > $ PACKAGE=yes make install > > And the various auto-generated certs *won't* be created or installed. > > > Rather than having my package build framework let the bootstrap run in > the DESTDIR and nuke the artifacts it creates before packaging, is there > some setting one can tweak to skip that bootstrap as part of make install? > > See above. The Linux packages have similar requirements, hence the > current solution. > > Alan DeKok. > > > > > ------------------------------ > > Subject: Digest Footer > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/ > list/users.html > > ------------------------------ > > End of Freeradius-Users Digest, Vol 145, Issue 24 > ************************************************* > Hii i tried in another machine still facing same issue

2 1

free radius Not able to add clients from nas table mysql
by avnel vernon 09 May '17

09 May '17

ip_hton: Name or service not known [root@localhost ~]# radiusd -X radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, built on Jan 17 2017 at 18:49:55 Copyright (C) 1999-2014 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/sql including configuration file /etc/raddb/mods-config/sql/main/mysql/queries.conf including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } radiusd: #### Instantiating modules #### instantiate { } modules { # Loaded module rlm_always # Instantiating module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Instantiating module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Instantiating module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Instantiating module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Instantiating module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Instantiating module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Loaded module rlm_cache # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 16384 epoch = 0 add_stats = no } # Loaded module rlm_chap # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_detail # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Loaded module rlm_dhcp # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no mod_accounting_username_bug = no max_sessions = 1024 } # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = yes } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_method = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Loaded module rlm_exec # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } # Loaded module rlm_files # Instantiating module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" usersfile = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" compat = "cistron" } reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Loaded module rlm_linelog # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{Packet-Type}:-default}" } # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Loaded module rlm_preprocess # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Loaded module rlm_radutmp # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } # Loaded module rlm_unpack # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_sql # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = "3306" login = "root" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" group_membership_query = "# SELECT groupname # FROM radusergroup # WHERE username = BINARY '%{SQL-User-Name}' # ORDER BY priority" simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" } post-auth { reference = ".query" } mysql { tls { } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 4 max = 32 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 1 spread = no } rlm_sql (sql): Opening additional connection (0) rlm_sql_mysql: Starting connect to MySQL server rlm_sql (sql): Opening additional connection (1) rlm_sql_mysql: Starting connect to MySQL server rlm_sql (sql): Opening additional connection (2) rlm_sql_mysql: Starting connect to MySQL server rlm_sql (sql): Opening additional connection (3) rlm_sql_mysql: Starting connect to MySQL server rlm_sql (sql): Opening additional connection (4) rlm_sql_mysql: Starting connect to MySQL server rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (4) rlm_sql (sql): Executing query: 'SELECT id, nasname, shortname, type, secret, server FROM nas' rlm_sql (sql): Adding client zd (zd) to 192.168.1.173 clients list ip_hton: Name or service not known rlm_sql (sql): Released connection (4) } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Creating Auth-Type = digest # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipv4addr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 as server default Listening on acct address * port 1813 as server default Listening on auth address :: port 1812 as server default Listening on acct address :: port 1813 as server default Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel Opening new proxy socket 'proxy address * port 0' Listening on proxy address * port 50778 Ready to process requests

2 1

TLS Variables not set
by Luke Pascoe 09 May '17

09 May '17

Hi, I'm having trouble getting some basic TLS checks working for a Wifi EAP-TLS connection. Centos7, freeradius 3.0.4 Basically I'm messing around with the built-in check-eap-tls virtual server, as a pre-requisite to some more complex matching I want to do, but it's not working as it would seem it should. My client connects using a valid cert, I see TLS "stuff" in the logs like this: (5) Auth-Type eap { (5) eap : Expiring EAP session with state 0x9e6f4ada9ae847d4 (5) eap : Finished EAP session with state 0x9e6f4ada9ae847d4 (5) eap : Previous EAP request found for state 0x9e6f4ada9ae847d4, released from the list (5) eap : Peer sent method TLS (13) (5) eap : EAP TLS (13) (5) eap : Calling eap_tls to process EAP data (5) eap_tls : Authenticate (5) eap_tls : processing EAP-TLS (5) eap_tls : eaptls_verify returned 7 (5) eap_tls : Done initial handshake (5) eap_tls : <<< TLS 1.0 Handshake [length 04c4], Certificate (5) eap_tls : chain-depth=1, (5) eap_tls : error=0 (5) eap_tls : --> User-Name = lpascoe (5) eap_tls : --> BUF-Name = NZHothouse CA (5) eap_tls : --> subject = /C=NZ/ST=AKL/L=Auckland/O=NZHothouse/CN=NZHothouse CA/emailAddress= admin(a)nzhothouse.co.nz (5) eap_tls : --> issuer = /C=NZ/ST=AKL/L=Auckland/O=NZHothouse/CN=NZHothouse CA/emailAddress= admin(a)nzhothouse.co.nz (5) eap_tls : --> verify return:1 (5) eap_tls : chain-depth=0, (5) eap_tls : error=0 (5) eap_tls : --> User-Name = lpascoe (5) eap_tls : --> BUF-Name = lpascoe (5) eap_tls : --> subject = /C=NZ/ST=AKL/L=Auckland/O=NZHothouse/CN=lpascoe/emailAddress= admin(a)nzhothouse.co.nz (5) eap_tls : --> issuer = /C=NZ/ST=AKL/L=Auckland/O=NZHothouse/CN=NZHothouse CA/emailAddress= admin(a)nzhothouse.co.nz (5) eap_tls : --> verify return:1 (5) eap_tls : TLS_accept: SSLv3 read client certificate A (5) eap_tls : <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange (5) eap_tls : TLS_accept: SSLv3 read client key exchange A (5) eap_tls : <<< TLS 1.0 Handshake [length 0106], CertificateVerify (5) eap_tls : TLS_accept: SSLv3 read certificate verify A (5) eap_tls : <<< TLS 1.0 ChangeCipherSpec [length 0001] (5) eap_tls : <<< TLS 1.0 Handshake [length 0010], Finished (5) eap_tls : TLS_accept: SSLv3 read finished A (5) eap_tls : >>> TLS 1.0 ChangeCipherSpec [length 0001] (5) eap_tls : TLS_accept: SSLv3 write change cipher spec A (5) eap_tls : >>> TLS 1.0 Handshake [length 0010], Finished (5) eap_tls : TLS_accept: SSLv3 write finished A (5) eap_tls : TLS_accept: SSLv3 flush data (5) eap_tls : (other): SSL negotiation finished successfully SSL Connection Established (5) eap_tls : eaptls_process returned 13 So I'm pretty certail that part is working correctly. However when we get to the check-eap-tls part, the variables it expects to match against aren't populated: (6) # Executing section authorize from file /etc/raddb/sites-enabled/check-eap-tls (6) authorize { (6) update config { (6) Auth-Type := Accept (6) } # update config = noop (6) if ("%{TLS-Client-Cert-Common-Name}" == "client.example.com") (6) EXPAND %{TLS-Client-Cert-Common-Name} (6) --> (6) if ("%{TLS-Client-Cert-Common-Name}" == "client.example.com") -> FALSE (6) else else { (6) update config { (6) Auth-Type := Reject (6) } # update config = noop (6) update reply { (6) Reply-Message := 'Your certificate is not valid.' (6) } # update reply = noop (6) } # else else = noop As you can see the expansion for %{TLS-Client-Cert-Common-Name} is an empty string. This is the variable I want to match against in future. Any suggestions around what I need to enable to get these TLS variables populated would be greatly appreciated. Thanks. Luke Pascoe *E* luke(a)osnz.co.nz * P* +64 (9) 296 2961 * M* +64 (27) 426 6649 * W* www.osnz.co.nz 24 Wellington St Papakura Auckland, 2110 New Zealand

3 3

radwho Calling-Station-Id
by Roman 09 May '17

09 May '17

Hello, Could someone point me out, where can I set and what to be able to see the full Calling-Station-Id instead of truncated one? #radwho tt23kswp17 -R User-Name = "tt23kswp17" Acct-Session-Id = "8140098a" NAS-IP-Address = My-NAS-IP NAS-Port = 15731092 Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Address = USER-IP-ADDR Acct-Session-Time = 216 *Calling-Station-Id = "00:A0:C5:3F:13:"* It does obviously miss the last pair of caller's MAC While FreeRadius gets the full mac from the NAS: (2) Received Accounting-Request Id 111 from NAS-IP:42841 to FreeRaius-IP:1813 length 153 (2) Service-Type = Framed-User (2) Framed-Protocol = PPP (2) NAS-Port = 15731092 (2) NAS-Port-Type = Ethernet (2) User-Name = "tt23kswp17" (2) *Calling-Station-Id = "00:A0:C5:3F:13:2D"* (2) Called-Station-Id = "nas-id" (2) NAS-Port-Id = "Eth7-PPPoE" (2) Acct-Session-Id = "8140098a" (2) Framed-IP-Address = USER-IP-ADDR (2) Acct-Authentic = RADIUS (2) Event-Timestamp = "May 8 2017 14:50:09 EEST" (2) Acct-Status-Type = Start (2) NAS-Identifier = "nas-id (2) Acct-Delay-Time = 0 (2) NAS-IP-Address = NAS-IP-ADDR -- Best regards, Roman.

3 4

Need help for adding dictionary and used for check item
by 吳子境 Matt.Wu/TP/FITI 09 May '17

09 May '17

Hello, I have problem in adding new dictionary in FreeRADIUS Version 2.2.8, and use the attribute to users check item, but always response Access-Reject. Below is my create step: First, Create 'dictionary.fitivision' in '/usr/share/freeradius2/', as following: # -*- text -*- # # As posted to the list. # # Version: $Id$ # VENDOR Fitivision 49809 BEGIN-VENDOR Fitivision ATTRIBUTE Fitivision-Essid-Name 1 string END-VENDOR Fitivision And add include in '/usr/share/freeradius2/dictionary': $INCLUDE dictionary.fitivision When I test it on reply item, it's workable. But when I used for check item, it always response Access-Reject. The users config as following: "test3" Cleartext-Password := "testpwd", Fitivision-Essid-Name == "test" And the radiux log as following: radiusd: FreeRADIUS Version 2.2.8, for host arm-openwrt-linux-gnu, built on Apr 28 2017 at 10:22:04 Copyright (C) 1999-2015 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License. For more information about these matters, see the file named COPYRIGHT. Starting - reading configuration files ... including configuration file /etc/freeradius2/radiusd.conf including configuration file /etc/freeradius2/clients.conf including files in directory /etc/freeradius2/modules/ including configuration file /etc/freeradius2/modules/attr_filter including configuration file /etc/freeradius2/modules/attr_rewrite including configuration file /etc/freeradius2/modules/chap including configuration file /etc/freeradius2/modules/echo including configuration file /etc/freeradius2/modules/exec including configuration file /etc/freeradius2/modules/files including configuration file /etc/freeradius2/modules/mschap including configuration file /etc/freeradius2/modules/pap including configuration file /etc/freeradius2/eap.conf including files in directory /etc/freeradius2/sites/ including configuration file /etc/freeradius2/sites/default main { allow_core_dumps = no } including dictionary file /etc/freeradius2/dictionary main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log" run_dir = "/var/run" libdir = "/usr/lib/freeradius2" radacctdir = "/var/db/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client 0.0.0.0/0 { require_message_authenticator = no secret = "testing123" nastype = "other" } radiusd: #### Instantiating modules #### radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius2/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius2/modules/pap pap { encryption_scheme = "auto" auto_header = yes } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius2/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius2/modules/mschap mschap { use_mppe = no require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius2/eap.conf eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius2/certs" pem_file_type = yes private_key_file = "/etc/freeradius2/certs/server.pem" certificate_file = "/etc/freeradius2/certs/server.pem" CA_file = "/etc/freeradius2/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius2/certs/dh" random_file = "/etc/freeradius2/certs/random" fragment_size = 1024 include_length = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = no soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius2/modules/files files { usersfile = "/etc/freeradius2/users" acctusersfile = "/etc/freeradius2/acct_users" preproxy_usersfile = "/etc/freeradius2/preproxy_users" compat = "cistron" } reading pairlist file /etc/freeradius2/users [/etc/freeradius2/users]:21 Cistron compatibility checks for entry test3 ... reading pairlist file /etc/freeradius2/acct_users reading pairlist file /etc/freeradius2/preproxy_users Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius2/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } } # modules } # server radiusd: #### Opening IP addresses and Ports #### Listening on authentication address 192.168.168.205 port 1812 Listening on accounting address 192.168.168.205 port 1813 Ready to process requests. rad_recv: Access-Request packet from host 192.168.168.205 port 42115, id=18, length=197 User-Name = "test3" Called-Station-Id = "00-03-7F-19-4E-45:fws2310-Mm2" NAS-Port-Type = Wireless-802.11 NAS-Port = 0 Calling-Station-Id = "A4-67-06-6D-A8-2E" Connect-Info = "CONNECT 0Mbps 802.11b" Acct-Session-Id = "BF8FD357-00000002" Attr-186 = 0x0050f202 Attr-187 = 0x0050f202 Attr-188 = 0x000fac01 Fitivision-Essid-Name = "test" Framed-MTU = 1400 EAP-Message = 0x021b000a017465737433 Message-Authenticator = 0x07abb25c6fcac61aeb3d0f1e49cc98d6 # Executing section authorize from file /etc/freeradius2/sites/default +group authorize { ++[mschap] = noop [eap] EAP packet type response id 27 length 10 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated ++[files] = noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius2/sites/default +group authenticate { [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 18 to 192.168.168.205 port 42115 EAP-Message = 0x011c00061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc30eff1bc312e6f65e8768c16e09584c Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.168.205 port 42115, id=19, length=336 User-Name = "test3" Called-Station-Id = "00-03-7F-19-4E-45:fws2310-Mm2" NAS-Port-Type = Wireless-802.11 NAS-Port = 0 Calling-Station-Id = "A4-67-06-6D-A8-2E" Connect-Info = "CONNECT 0Mbps 802.11b" Acct-Session-Id = "BF8FD357-00000002" Attr-186 = 0x0050f202 Attr-187 = 0x0050f202 Attr-188 = 0x000fac01 Fitivision-Essid-Name = "test" Framed-MTU = 1400 011000500040100001f000a00080006001700180019000b0002010000050005010000000000120000 State = 0xc30eff1bc312e6f65e8768c16e09584c Message-Authenticator = 0x97c6fbb9e1abd4ef3a74f02b493bd9d9 # Executing section authorize from file /etc/freeradius2/sites/default +group authorize { ++[mschap] = noop [eap] EAP packet type response id 28 length 131 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius2/sites/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 121 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< Unknown TLS version [length 0005] [peap] <<< TLS 1.0 Handshake [length 0074], ClientHello [peap] TLS_accept: unknown state [peap] >>> Unknown TLS version [length 0005] [peap] >>> TLS 1.0 Handshake [length 0039], ServerHello [peap] TLS_accept: unknown state [peap] >>> Unknown TLS version [length 0005] [peap] >>> TLS 1.0 Handshake [length 085e], Certificate [peap] TLS_accept: unknown state [peap] >>> Unknown TLS version [length 0005] [peap] >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange [peap] TLS_accept: unknown state [peap] >>> Unknown TLS version [length 0005] [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: unknown state [peap] TLS_accept: unknown state [peap] TLS_accept: unknown state [peap] TLS_accept: Need to read more data: unknown state [peap] TLS_accept: Need to read more data: unknown state In SSL Handshake Phase [603087.097870] [wifi0] [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eFWLOG: [81054832] ap] = handled +} # group authenticate = handled Sending AccessRATE: ChainMask 1, peer_mac a8:2e, phymode 1, ni_flags 0x00040016, vht_mcs_set 0x0000, ht_mcs_set 0xffffffff, legacy_rate_set 0x0fff -Challenge of id 19 to 192.168.168.205 port 42115 071309536f6d65776865726531153013060355040a130c4578616d706c65200x73496e632e3120301e06092a864886f70d010901161161646d696e406578616d70, 6c652e636f6d312630240603550403131d4578616d706c6520436572746966 0xa EAP-Message = 0x696361746520417574686f72697479301e170d313630363, 0x90 ) , 0x90 ) 96e406578616d706c652e636f6d30820122300d06092a864, 0x3, 0x479, 0x0, 0x9 ) 886f70d01010105000382010f003082010a0282010100c946423265b4772617374660729c3c023d379b4681413b66f0de07f15b16eb15b5ee002373b664f5c61e11551f35c7 3f493e1437188fd72840aeeb6ceaf96f0203010001a317301530130603551d25040c300a06082b06010505070301300d06092a864886f70d01010505 fba07a9ee61c4c06d633ec4ec0c0885d07b45952f31d2edea03bb0bb93aa6e42fe7580a3d2f58b052a1fb56bde36002acee20f2e3b92bb99b72b0c67 EAP-Message = 0x65011ccb33e94e5fd90004ab Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc30eff1bc213e6f65e8768c16e09584c Finished request 1. Going to the next request Waking up in 4.4 seconds. rad_recv: Access-Request packet from host 192.168.168.205 port 42115, id=20, length=211 User-Name = "test3" Called-Station-Id = "00-03-7F-19-4E-45:fws2310-Mm2" NAS-Port-Type = Wireless-802.11 NAS-Port = 0 Calling-Station-Id = "A4-67-06-6D-A8-2E" Connect-Info = "CONNECT 0Mbps 802.11b" Acct-Session-Id = "BF8FD357-00000002" Attr-186 = 0x0050f202 Attr-187 = 0x0050f202 Attr-188 = 0x000fac01 Fitivision-Essid-Name = "test" Framed-MTU = 1400 EAP-Message = 0x021d00061900 State = 0xc30eff1bc213e6f65e8768c16e09584c Message-Authenticator = 0xf40ff990a4a13753cc3f28b33ca5a182 # Executing section authorize from file /etc/freeradius2/sites/default +group authorize { ++[mschap] = noop [eap] EAP packet type response id 29 length 6 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius2/sites/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 20 to 192.168.168.205 port 42115 7479301e170d3136303632313037343833345a170d3137303632313037343833345a308193310b3009060355040613024652310f300d060355040813 25d9d75e9faa36bacf2d256d8087504d1055532185e593fa3e07f9e6ddad8e457bf8979b2546bdc2768018764158ab0f21ae77998cecd6d1809b278b 0f8d572ebd0d9e887d3081c80603551d230481c03081bd80140e28c41f34600d01ab674c0f8d572ebd0d9e887da18199a48196308193310b30090603 fffb4632ebeca0865b13c0303e9485f59828369fe812f32b4d77d3d9706c7e97666a331797210b32c9cab80c500d4bf29224708affda268acc6bc612 EAP-Message = 0x68d2a1ab15f206e8 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc30eff1bc110e6f65e8768c16e09584c Finished request 2. Going to the next request Waking up in 4.4 seconds. rad_recv: Access-Request packet from host 192.168.168.205 port 42115, id=21, length=211 User-Name = "test3" Called-Station-Id = "00-03-7F-19-4E-45:fws2310-Mm2" NAS-Port-Type = Wireless-802.11 NAS-Port = 0 Calling-Station-Id = "A4-67-06-6D-A8-2E" Connect-Info = "CONNECT 0Mbps 802.11b" Acct-Session-Id = "BF8FD357-00000002" Attr-186 = 0x0050f202 Attr-187 = 0x0050f202 Attr-188 = 0x000fac01 Fitivision-Essid-Name = "test" Framed-MTU = 1400 EAP-Message = 0x021e00061900 State = 0xc30eff1bc110e6f65e8768c16e09584c Message-Authenticator = 0xee0d464855fa5a53cf755d16de6fdb07 # Executing section authorize from file /etc/freeradius2/sites/default +group authorize { ++[mschap] = noop [eap] EAP packet type response id 30 length 6 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius2/sites/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 21 to 192.168.168.205 port 42115 0001470300174104975e7a95fb4a34da8edb2ed340d161af75e08b4a69b597f4cbda60518ee060eeb29b016c3f54fd1ff7fa5f5723e02b9b2409daaa 155596da9065984a02f00d19716a270374c21be8cec30236a14cf2e6eff550a27c26bce5e22b7314a6141ecf8695d2a5a74d9ee2dfe30413058ccb62 EAP-Message = 0xadbf51cc6d2a30b94b8ba5cc45dfc686b316030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc30eff1bc011e6f65e8768c16e09584c Finished request 3. Going to the next request Waking up in 4.1 seconds. rad_recv: Access-Request packet from host 192.168.168.205 port 42115, id=22, length=349 User-Name = "test3" Called-Station-Id = "00-03-7F-19-4E-45:fws2310-Mm2" NAS-Port-Type = Wireless-802.11 NAS-Port = 0 Calling-Station-Id = "A4-67-06-6D-A8-2E" Connect-Info = "CONNECT 0Mbps 802.11b" Acct-Session-Id = "BF8FD357-00000002" Attr-186 = 0x0050f202 Attr-187 = 0x0050f202 Attr-188 = 0x000fac01 Fitivision-Essid-Name = "test" Framed-MTU = 1400 116030100304477833ffd6e82754c90f5ccfc4fd75f7c67c30f13f0e3b07d3dbd903b794dc8bf52b3eb26040ed2925a094f71bebf30 State = 0xc30eff1bc011e6f65e8768c16e09584c Message-Authenticator = 0x981d19112699f36bcaa048ac6d5cb917 # Executing section authorize from file /etc/freeradius2/sites/default +group authorize { ++[mschap] = noop [eap] EAP packet type response id 31 length 144 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius2/sites/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 134 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< Unknown TLS version [length 0005] [peap] <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange [peap] TLS_accept: unknown state [peap] TLS_accept: unknown state [peap] <<< Unknown TLS version [length 0005] [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< Unknown TLS version [length 0005] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: unknown state [peap] >>> Unknown TLS version [length 0005] [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: unknown state [peap] >>> Unknown TLS version [length 0005] [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: unknown state [peap] TLS_accept: unknown state [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 22 to 192.168.168.205 port 42115 EAP-Message = 0x0120004119001403010001011603010030743a197efba6673363d52e38c84ee6af1156dc98475b254286422eec8c0d0c5e4a55682ec8483c791906496be38ca2b0 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc30eff1bc72ee6f65e8768c16e09584c Finished request 4. Going to the next request Waking up in 3.9 seconds. rad_recv: Access-Request packet from host 192.168.168.205 port 42115, id=23, length=211 User-Name = "test3" Called-Station-Id = "00-03-7F-19-4E-45:fws2310-Mm2" NAS-Port-Type = Wireless-802.11 NAS-Port = 0 Calling-Station-Id = "A4-67-06-6D-A8-2E" Connect-Info = "CONNECT 0Mbps 802.11b" Acct-Session-Id = "BF8FD357-00000002" Attr-186 = 0x0050f202 Attr-187 = 0x0050f202 Attr-188 = 0x000fac01 Fitivision-Essid-Name = "test" Framed-MTU = 1400 EAP-Message = 0x022000061900 State = 0xc30eff1bc72ee6f65e8768c16e09584c Message-Authenticator = 0x3ad860d004ef3fcabba5f7614d629707 # Executing section authorize from file /etc/freeradius2/sites/default +group authorize { ++[mschap] = noop [eap] EAP packet type response id 32 length 6 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius2/sites/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED [peap] >>> Unknown TLS version [length 0005] ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 23 to 192.168.168.205 port 42115 EAP-Message = 0x0121002b1900170301002038f0a9de8c6c35bb8c25d91742508de0756c5f96898a5f807bbf622d860fd702 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc30eff1bc62fe6f65e8768c16e09584c Finished request 5. Going to the next request Waking up in 3.5 seconds. rad_recv: Access-Request packet from host 192.168.168.205 port 42115, id=24, length=248 User-Name = "test3" Called-Station-Id = "00-03-7F-19-4E-45:fws2310-Mm2" NAS-Port-Type = Wireless-802.11 NAS-Port = 0 Calling-Station-Id = "A4-67-06-6D-A8-2E" Connect-Info = "CONNECT 0Mbps 802.11b" Acct-Session-Id = "BF8FD357-00000002" Attr-186 = 0x0050f202 Attr-187 = 0x0050f202 Attr-188 = 0x000fac01 Fitivision-Essid-Name = "test" Framed-MTU = 1400 EAP-Message = 0x0221002b19001703010020d9a51a72f4d3f026ee29713f988b5ea384f63c39bca9d72cbd454c22dc9f7f6b State = 0xc30eff1bc62fe6f65e8768c16e09584c Message-Authenticator = 0x9598e5c8853b46372c49e0eab0d847b1 # Executing section authorize from file /etc/freeradius2/sites/default +group authorize { ++[mschap] = noop [eap] EAP packet type response id 33 length 43 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius2/sites/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] <<< Unknown TLS version [length 0005] [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - test3 [peap] Got inner identity 'test3' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x0221000a017465737433 server { [peap] Setting User-Name to test3 Sending tunneled request EAP-Message = 0x0221000a017465737433 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "test3" Called-Station-Id = "00-03-7F-19-4E-45:fws2310-Mm2" NAS-Port-Type = Wireless-802.11 NAS-Port = 0 Calling-Station-Id = "A4-67-06-6D-A8-2E" Connect-Info = "CONNECT 0Mbps 802.11b" Acct-Session-Id = "BF8FD357-00000002" Attr-186 = 0x0050f202 Attr-187 = 0x0050f202 Attr-188 = 0x000fac01 Fitivision-Essid-Name = "test" Framed-MTU = 1400 server { # Executing section authorize from file /etc/freeradius2/sites/default +group authorize { ++[mschap] = noop [eap] EAP packet type response id 33 length 10 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated ++[files] = noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius2/sites/default +group authenticate { [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] = handled +} # group authenticate = handled } # server [peap] Got tunneled reply code 11 EAP-Message = 0x0122001f1a0122001a1038b1d4f1ac9d9e2d502428bcd4be1b877465737433 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaacefa4baaece0d52cbb51841f6886cc [peap] Got tunneled reply RADIUS code Access-Challenge EAP-Message = 0x0122001f1a0122001a1038b1d4f1ac9d9e2d502428bcd4be1b877465737433 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaacefa4baaece0d52cbb51841f6886cc [peap] Got tunneled Access-Challenge [peap] >>> Unknown TLS version [length 0005] ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 24 to 192.168.168.205 port 42115 EAP-Message = 0x0122003b19001703010030d70c7180d63f7345328c82eee2d29cc97bcbfd56bd375a88759bec5058ea295a12563bc4e70233b1f386d332e063d5c9 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc30eff1bc52ce6f65e8768c16e09584c Finished request 6. Going to the next request Waking up in 3.2 seconds. rad_recv: Access-Request packet from host 192.168.168.205 port 42115, id=25, length=312 User-Name = "test3" Called-Station-Id = "00-03-7F-19-4E-45:fws2310-Mm2" NAS-Port-Type = Wireless-802.11 NAS-Port = 0 Calling-Station-Id = "A4-67-06-6D-A8-2E" Connect-Info = "CONNECT 0Mbps 802.11b" Acct-Session-Id = "BF8FD357-00000002" Attr-186 = 0x0050f202 Attr-187 = 0x0050f202 Attr-188 = 0x000fac01 Fitivision-Essid-Name = "test" Framed-MTU = 1400 10519e089ae2095a3afea8dc67f17dc4b State = 0xc30eff1bc52ce6f65e8768c16e09584c Message-Authenticator = 0xea0f404b1fdc40e787d84bac706215d1 # Executing section authorize from file /etc/freeradius2/sites/default +group authorize { ++[mschap] = noop [eap] EAP packet type response id 34 length 107 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius2/sites/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] <<< Unknown TLS version [length 0005] [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x022200401a0222003b3131bc7ac09237790b1b2f2de3c9da70d10000000000000000ff91457ee5eb447396e409f6847c1759fead5ba59f6f7b0a007465737433 server { [peap] Setting User-Name to test3 Sending tunneled request EAP-Message = 0x022200401a0222003b3131bc7ac09237790b1b2f2de3c9da70d10000000000000000ff91457ee5eb447396e409f6847c1759fead5ba59f6f7b0a007465737433 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "test3" State = 0xaacefa4baaece0d52cbb51841f6886cc Called-Station-Id = "00-03-7F-19-4E-45:fws2310-Mm2" NAS-Port-Type = Wireless-802.11 NAS-Port = 0 Calling-Station-Id = "A4-67-06-6D-A8-2E" Connect-Info = "CONNECT 0Mbps 802.11b" Acct-Session-Id = "BF8FD357-00000002" Attr-186 = 0x0050f202 Attr-187 = 0x0050f202 Attr-188 = 0x000fac01 Fitivision-Essid-Name = "test" Framed-MTU = 1400 server { # Executing section authorize from file /etc/freeradius2/sites/default +group authorize { ++[mschap] = noop [eap] EAP packet type response id 34 length 64 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated ++[files] = noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius2/sites/default +group authenticate { [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /etc/freeradius2/sites/default [mschapv2] +group MS-CHAP { [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Creating challenge hash with username: test3 [mschap] Client is using MS-CHAPv2 for test3, we need NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] = reject +} # group MS-CHAP = reject [eap] Freeing handler ++[eap] = reject +} # group authenticate = reject Failed to authenticate the user. Using Post-Auth-Type Reject WARNING: Unknown value specified for Post-Auth-Type. Cannot perform requested action. } # server [peap] Got tunneled reply code 3 MS-CHAP-Error = "\"E=691 R=1" EAP-Message = 0x04220004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code Access-Reject MS-CHAP-Error = "\"E=691 R=1" EAP-Message = 0x04220004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE [peap] >>> Unknown TLS version [length 0005] ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 25 to 192.168.168.205 port 42115 EAP-Message = 0x0123002b190017030100200a019db07d5b363141790d2b79f35448849fb36c234d074dbdcaa68b4ec312f0 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc30eff1bc42de6f65e8768c16e09584c Finished request 7. Going to the next request Waking up in 2.8 seconds. rad_recv: Access-Request packet from host 192.168.168.205 port 42115, id=26, length=248 User-Name = "test3" Called-Station-Id = "00-03-7F-19-4E-45:fws2310-Mm2" NAS-Port-Type = Wireless-802.11 NAS-Port = 0 Calling-Station-Id = "A4-67-06-6D-A8-2E" Connect-Info = "CONNECT 0Mbps 802.11b" Acct-Session-Id = "BF8FD357-00000002" Attr-186 = 0x0050f202 Attr-187 = 0x0050f202 Attr-188 = 0x000fac01 Fitivision-Essid-Name = "test" Framed-MTU = 1400 EAP-Message = 0x0223002b19001703010020b8cd3f0acc578a073928fe39c5cd9910ae9fa867c95ddf1aade29daba16fd349 State = 0xc30eff1bc42de6f65e8768c16e09584c Message-Authenticator = 0xfa5287fca7371b423b4170722af255c2 # Executing section authorize from file /etc/freeradius2/sites/default +group authorize { ++[mschap] = noop [eap] EAP packet type response id 35 length 43 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius2/sites/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] <<< Unknown TLS version [length 0005] [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv failure [peap] Received EAP-TLV response. [peap] The users session was previously rejected: returning reject (again.) [peap] *** This means you need to read the PREVIOUS messages in the debug output [peap] *** to find out the reason why the user was rejected. [peap] *** Look for "reject" or "fail". Those earlier messages will tell you. [peap] *** what went wrong, and how to fix the problem. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] = invalid +} # group authenticate = invalid Failed to authenticate the user. Using Post-Auth-Type Reject WARNING: Unknown value specified for Post-Auth-Type. Cannot perform requested action. Delaying reject of request 8 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 8 Sending Access-Reject of id 26 to 192.168.168.205 port 42115 EAP-Message = 0x04230004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 1.7 seconds. Cleaning up request 0 ID 18 with timestamp +3 Waking up in 0.1 seconds. Cleaning up request 1 ID 19 with timestamp +3 Waking up in 0.4 seconds. Cleaning up request 2 ID 20 with timestamp +4 Waking up in 0.3 seconds. Cleaning up request 3 ID 21 with timestamp +4 Waking up in 0.1 seconds. Cleaning up request 4 ID 22 with timestamp +4 Waking up in 0.3 seconds. Cleaning up request 5 ID 23 with timestamp +4 Waking up in 0.3 seconds. Cleaning up request 6 ID 24 with timestamp +5 Waking up in 0.4 seconds. Cleaning up request 7 ID 25 with timestamp +5 Waking up in 1.0 seconds. Cleaning up request 8 ID 26 with timestamp +5 Ready to process requests. Do I missing something? Thanks Matt Wu

2 1

question about using rlm_python
by Darshak Thakore 09 May '17

09 May '17

Hi all, I'm trying to use the rlm_python module in FreeRadius 3.0.X and i've followed the documentation provided in the Wiki to enable and configure the module. The basic module seems to be working, i.e after activating the module in mods-enabled and setting the python_path in mods-enabled/python and enabling instantiate and authorize, i can see the calls being made to the instantiate and authorize functions in example.py. However, then i was trying to enable/import a new module (for example was trying to use redis to just store some values during authorize). I added the path of the new module in python_path ( ${modconfdir/${.:name}:/usr/local/lib/python2.7/dist-packages} ) I am unable to even launch freeradius. No matter which module I import, i always get an error that says python_function_load - Module 'example' not found <type 'exceptions.ImportError'> (No module named __future__) python_function_load - Failed to import python function 'eample.instantiate' /etc/freeradius/mods-enabled/python[9]: Instantiation failed for module "python" How can I setup the rlm_python so that i can import other modules in my example.py ? Thanks in advance

2 1

FW: Freeraius vs NPS
by Martin, Jeremy 08 May '17

08 May '17

Hello I am trying to replace a NPS server with freeradius implantation but I am running into a hurdle that basically equates to a go/no go senerio for the project. When NPS (Microsoft Network Policy Server) denies my clients (in this case ip phones) they prompt the user to enter credentials - required for initial setup. However when I take the same device and deny it with freeradius, basically no username and password for the device it does not prompt for no credentials so there is basically no way to setup the device. What I would like to do is replicate the behavior NPS. I am including the screenshot: left is nps - right is freereadius of the reject packet, I can't seem to tell what would cause this over the other so hopefully someone has some insight. I don't think that it maters for this question but the freeradius version is 3.0.4 on Centos 7. Everything is default, clean install except for the client definition for the switch. I am also including the entire packet capture just in case it helps. Thanks Jeremy

3 19

Install freeradius3.0.12 on ubuntu´s systemd and enable it on startup
by Paulo Rodrigues 08 May '17

08 May '17

Hi to everyone, I have a FreeRadius server (v3.0.12) running in my network (on a Ubuntu 16.04) and everything is fine. The only problem I am facing at the moment is to enable it in systemd to init on startup. I built it from source and copy the file rc.radiusd from /usr/local/sbin to /etc/init.d/radiusd to let it works with systemctl commands. I noticed that there are some files in the freeradius-3.0.12 folder (freeradius-3.0.12/debian) but I do not know how to install them in systemd. Can somebody help me to install freeradius-3.0.12 on systemd (build from source on ubuntu 16.04) and enable it on startup? Best regards, Paulo. Call Send SMS Add to Skype You'll need Skype CreditFree via Skype

2 1

Freeradius with existing asp.net identity DB
by Simon Coy 08 May '17

08 May '17

Hello, I would like to attach a Freeradius instance to an existing database of users/passwords. ASP.net identity stores passwords with the following hashing specification: * PBKDF2 with HMAC-SHA256, 128-bit salt, 256-bit subkey, 10000 iterations. * Format: { 0x01, prf (UInt32), iter count (UInt32), salt length (UInt32), salt, subkey } * (All UInt32s are stored big-endian.) Does anybody know if this is compatible with Freeradius out of the box? I can see from the docs that SHA-2 is supported but it's not clear to me whether the above configuration will work. Many thanks, Simon

2 1