August 2017 - Freeradius-Users - lists.freeradius.org

is there a way to identify the very first ACCESS-REQUEST
by Michael Hocke 16 Mar '18

16 Mar '18

Hi there, I want to improve our logging and want to keep track of authentication attempts that do not complete. I was thinking of logging the very first ACCESS-REQUEST and then later on the result. Is there a good way to identify the very first ACCESS-REQUEST from the client with unlang? Maybe by checking the contents of the session-state list or some such? Any ideas? Thanks! - Michael

4 6

Cisco-AVPair regex
by Kylián Martin 23 Feb '18

23 Feb '18

Hi all, I'm trying to save some of the Cisco-AVPair attributes into sql while acounting. Specifically, I'm interested in the dhcp-options and http-tlv attributes. WLC describes the connected device in these. Unfortunately, Freeradius 3.12 expands these values unregexable way. (With_cisco_vsa_hack = yes in preprocess the result is the same) Correctly expanded is just Cisco-AVPair = "audit-session-id=1ef1a8c000014809cba76859" Policy file: device_regex = '^((dhcp-option=)|(http-tlv=)){1}([\\].{2,5})([\\].{2,5})([\\].{3})([\\].{3})?(.*)' () fill_device_type { if (&Cisco-AVPair) { foreach &Cisco-AVPair { if ("%{Foreach-Variable-0}" =~ /${policy.device_regex}/i) { update request { &Calling-Device += "%{8} " } } } } } Processing: (98) Received Accounting-Request Id 28 from 192.168.241.30:57614 to 172.31.12.101:1813 length 482 (98) User-Name = "martin" (98) NAS-Port = 8 (98) NAS-IP-Address = 192.168.241.30 (98) Framed-IP-Address = 10.252.136.9 (98) Framed-IPv6-Prefix = 2a07:8d84:800:325f::/64 (98) Framed-IPv6-Prefix = 2a07:8d84:800:325f::/64 (98) Framed-IPv6-Prefix = 2a07:8d84:800:325f::/64 (98) Framed-IPv6-Prefix = 2a07:8d84:800:325f::/64 (98) Framed-IPv6-Prefix = 2a07:8d84:800:325f::/64 (98) Framed-IPv6-Prefix = fe80::/64 (98) NAS-Identifier = "d4-wlc5520" (98) Airespace-Wlan-Id = 20 (98) Acct-Session-Id = "5968a7cb/34:ab:37:ed:a2:bb/90671" (98) NAS-Port-Type = Wireless-802.11 (98) Cisco-AVPair = "audit-session-id=1ef1a8c000014809cba76859" (98) Acct-Authentic = RADIUS (98) Tunnel-Type:0 = VLAN (98) Tunnel-Medium-Type:0 = IEEE-802 (98) Tunnel-Private-Group-Id:0 = "595" (98) Event-Timestamp = "Jul 14 2017 14:47:01 CEST" (98) Cisco-AVPair = "dhcp-option=\000\014\000\0056spMK" (98) Cisco-AVPair = "http-tlv=\000\001\000\030iPhone8,2/10.3.2 (14F89)" How to regex these ? (98) Acct-Status-Type = Interim-Update (98) Acct-Input-Octets = 699538 (98) Acct-Input-Gigawords = 0 (98) Acct-Output-Octets = 2957172 (98) Acct-Output-Gigawords = 0 (98) Acct-Input-Packets = 5974 (98) Acct-Output-Packets = 5319 (98) Acct-Session-Time = 5494 (98) Acct-Delay-Time = 0 (98) Calling-Station-Id = "34-ab-37-ed-a2-bb" (98) Called-Station-Id = "d4-air1702-ap-1:UI MK tst" (98) # Executing section preacct from file /etc/freeradius/3.0/sites-enabled/default (98) preacct { (98) [preprocess] = ok (98) policy rewrite_called_station_id { (98) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (98) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> FALSE (98) elsif (&Called-Station-Id && (&Called-Station-Id =~ /^(.+)(:){1}((.+))?$/i)) { (98) elsif (&Called-Station-Id && (&Called-Station-Id =~ /^(.+)(:){1}((.+))?$/i)) -> TRUE (98) elsif (&Called-Station-Id && (&Called-Station-Id =~ /^(.+)(:){1}((.+))?$/i)) { (98) update request { (98) EXPAND %{1} (98) --> d4-air1702-ap-1 (98) &Called-Station-Id := d4-air1702-ap-1 (98) EXPAND %{3} (98) --> UI MK tst (98) &Called-Station-SSID := UI MK tst (98) } # update request = noop (98) [updated] = updated (98) } # elsif (&Called-Station-Id && (&Called-Station-Id =~ /^(.+)(:){1}((.+))?$/i)) = updated (98) ... skipping else: Preceding "if" was taken (98) } # policy rewrite_called_station_id = updated (98) policy fill_device_type { (98) if (&Cisco-AVPair) { (98) if (&Cisco-AVPair) -> TRUE (98) if (&Cisco-AVPair) { (98) foreach &Cisco-AVPair (98) if ("%{Foreach-Variable-0}" =~ /^((dhcp-option=)|(http-tlv=)){1}([\\].{2,5})([\\].{2,5})([\\].{3})([\\].{3})?(.*)/i) { (98) EXPAND Foreach-Variable-0 (98) --> audit-session-id=1ef1a8c000014809cba76859 (98) EXPAND %{Foreach-Variable-0} (98) --> audit-session-id=1ef1a8c000014809cba76859 (98) if ("%{Foreach-Variable-0}" =~ /^((dhcp-option=)|(http-tlv=)){1}([\\].{2,5})([\\].{2,5})([\\].{3})([\\].{3})?(.*)/i) -> FALSE (98) if ("%{Foreach-Variable-0}" =~ /^((dhcp-option=)|(http-tlv=)){1}([\\].{2,5})([\\].{2,5})([\\].{3})([\\].{3})?(.*)/i) { (98) EXPAND Foreach-Variable-0 (98) --> dhcp-option= (98) EXPAND %{Foreach-Variable-0} (98) --> dhcp-option= (98) if ("%{Foreach-Variable-0}" =~ /^((dhcp-option=)|(http-tlv=)){1}([\\].{2,5})([\\].{2,5})([\\].{3})([\\].{3})?(.*)/i) -> FALSE (98) if ("%{Foreach-Variable-0}" =~ /^((dhcp-option=)|(http-tlv=)){1}([\\].{2,5})([\\].{2,5})([\\].{3})([\\].{3})?(.*)/i) { (98) EXPAND Foreach-Variable-0 (98) --> http-tlv= (98) EXPAND %{Foreach-Variable-0} (98) --> http-tlv= Both attributes are expanded till first whitespace char (98) if ("%{Foreach-Variable-0}" =~ /^((dhcp-option=)|(http-tlv=)){1}([\\].{2,5})([\\].{2,5})([\\].{3})([\\].{3})?(.*)/i) -> FALSE (98) } # foreach &Cisco-AVPair = updated (98) } # if (&Cisco-AVPair) = updated How to get text values following whitespaces? I've already tried if ("unescape:%{Foreach-Variable-0}" =~ /${policy.device_regex}/i) with no luck Martin Kylián

4 11

Terminate EAP-TTLS then proxy
by adrian.p.smith＠bt.com 22 Sep '17

22 Sep '17

I would like to be able to proxy the Auth request after terminating the EAP-TTLS. FreeRadius sees the realm prefix on the User-Name and wants to proxy first. Is this possible or even sensible please? Regards, Adrian

6 20

Porting ldap module configuration from 2.2.9 to 3.0.15
by Olivier 21 Sep '17

21 Sep '17

Hi, I am curently trying to migrate my sever from freeradius 2 to 3 and am facing a number of problems. The first in in ldap module. In version 2, I did not define an identity nor a password and the binding to ldap server is made with the user name and password, effectively using ldap to authenticate the user. In ldap logs, with Freeradius 2, I have: Aug 31 16:19:41 ldap slapd[550]: conn=60636 fd=98 ACCEPT from IP=192.41.170.6:39806 (IP=192.41.170.6:636) Aug 31 16:19:41 ldap slapd[550]: conn=60636 fd=98 TLS established tls_ssf=256 ssf=256 Aug 31 16:19:41 ldap slapd[550]: conn=60636 op=0 BIND dn="uid=on,ou=People,ou=csim,dc=cs,dc=ait,dc=ac,dc=th" method=128 Aug 31 16:19:41 ldap slapd[550]: conn=60636 op=0 BIND dn="uid=on,ou=People,ou=csim,dc=cs,dc=ait,dc=ac,dc=th" mech=SIMPLE ssf=0 Aug 31 16:19:41 ldap slapd[550]: conn=60636 op=0 RESULT tag=97 err=0 text= Aug 31 16:19:41 ldap slapd[550]: conn=60636 op=1 UNBIND Aug 31 16:19:41 ldap slapd[550]: conn=60636 fd=98 closed showing that radius has properly bound to ldap using the username (dn="on"). With the version3, I see: Aug 31 16:30:32 ldap slapd[550]: conn=60904 fd=107 ACCEPT from IP=192.41.170.3:37996 (IP=192.41.170.6:636) Aug 31 16:30:32 ldap slapd[550]: conn=60904 fd=107 TLS established tls_ssf=256 ssf=256 Aug 31 16:30:32 ldap slapd[550]: conn=60904 op=0 BIND dn="" method=128 where an anonymous bind is attempted (dn=""). I am not sure what has change in this regard between version 2 and 3, but I really need to replicate the same mechanism as in version 2, that is bind with the user name instead of going with some administrator account that would search in the ldap directory. How can I acheive that? Thanks in advance, Olivier --

4 17

Re: not able to install FR 3.0.16+git in (pure) Debian 9
by Rui Ribeiro 11 Sep '17

11 Sep '17

> > Message: 2 > Date: Fri, 11 Aug 2017 17:55:12 +0200 > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: not able to install FR 3.0.16+git in (pure) Debian 9 > Message-ID: <13B96F99-2D68-4469-9CC1-639938303881(a)deployingradius.com> > Content-Type: text/plain; charset=us-ascii > > On Aug 11, 2017, at 5:50 PM, Rui Ribeiro <ruyrybeyro(a)gmail.com> wrote: > > What is the best way to send patches? > > > > This is the one for including libjson-c3 > > For small things, that's fine. I've pushed a fix. > > Alan DeKok. > > > > Hi again Alan, After this commit, you can already compile for Debian 9, thanks. If you would not mind, I would also propose striking out the HeartBleed check from debian/rules in 3.0.x, to be able to install it on Debian 9. Otherwise, the dependencies are not satisfied, and Debian 9 refuses to install the packages. --- debian/rules.old 2017-08-16 15:19:15.015393327 +0100 +++ debian/rules 2017-08-16 15:19:27.647279581 +0100 @@ -52,13 +52,6 @@ confflags += --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE) endif -# Add dependency on distribution specific version of openssl that fixes Heartbleed (CVE-2014-0160). -ifeq ($(shell dpkg-vendor --derives-from Ubuntu && echo yes),yes) - SUBSTVARS = -Vdist:Depends="libssl1.0.0 (>= 1.0.1f-1ubuntu2)" -else - SUBSTVARS = -Vdist:Depends="libssl1.0.0 (>= 1.0.1e-2+deb7u5)" -endif - # Add libsystemd-dev as a Build-Depends to debian/control if it is known to this system ifeq ($(shell apt-cache show libsystemd-dev &>/dev/null && echo yes),yes) CONTROL_BUILDDEPS += libsystemd-dev, -- Regards, -- Rui Ribeiro Senior Linux Architect and Network Administrator ISCTE-IUL https://www.linkedin.com/pub/rui-ribeiro/16/ab8/434

7 21

Evaluate Ldap-Group and SSID for WiFi authorization
by Adam Cage 05 Sep '17

05 Sep '17

People, good morning...I have a Freeradius with AD authentication and LDAP authorization working OK. Now I have to authorize users that belong to GROUP1 and have SSID = Free, I have these definitions: - GROUP1 is a group defined in the AD - SSID comes with Called-Station-Id in the form MAC Address:SSID, for example "51:bc:11:e1:34:70:Free", and it's not defined i the AD - The clause defined in default and inner-tunnel files is: if (LDAP-Group == "GROUP1" && Called-Station-Id == "*:Free") { update reply { Reply-Message = "Hello %{User-Name}: Access allowed" } ok } else { reject After testing, I fail and this is the debug: Wed Aug 23 09:34:58 2017 : Debug: rlm_ldap::ldap_groupcmp: User found in group GROUP1 Wed Aug 23 09:34:58 2017 : Debug: [ldap] ldap_release_conn: Release Id: 0 Wed Aug 23 09:34:58 2017 : Info: ? Evaluating (LDAP-Group == "GROUP1" ) -> TRUE Wed Aug 23 09:34:58 2017 : Info: (Attribute Called-Station-Id was not found) Wed Aug 23 09:34:58 2017 : Info: ? Evaluating (Called-Station-Id == "*:Free") -> FALSE Wed Aug 23 09:34:58 2017 : Info: ++? if (LDAP-Group == "GROUP1" && Called-Station-Id == "*:Free") -> FALSE Wed Aug 23 09:34:58 2017 : Info: ++else else { Wed Aug 23 09:34:58 2017 : Info: +++[reject] = reject Wed Aug 23 09:34:58 2017 : Info: ++} # else else = reject Wed Aug 23 09:34:58 2017 : Info: +} # group authorize = reject Wed Aug 23 09:34:58 2017 : Info: Using Post-Auth-Type REJECT Wed Aug 23 09:34:58 2017 : Info: # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel Wed Aug 23 09:34:58 2017 : Info: +group REJECT { Can you help me please? Thanks in advance. ADAM

4 14

Running ntlm_auth as a connection pool
by Arnab Roy 04 Sep '17

04 Sep '17

Hi All, I am seeing some performance challenges with ntlm_auth (Currently running 3.0.15). My setup is pretty non-standard so I will apologise for this beforehand. But my hands are tied. Our mschap module actually calls a shell script which than calls ntlm_auth (we actually need to perform an ldap lookup before obtaining the samaccount name to pass to ntlm_auth), as expected this throws up some challenges under load. What I would like to know if its possible to do anything to improve performance under this circumstances. I know the direct winbind mode would have been great but the ldap lookup is critical for things to work our end. Mr Google returned some suggestions that their was an option to run ntlm_auth as a connection pool , is it still there / was it dropped in favour of direct winbind connectivity. Any suggestions welcome. Many Thanks Arnab

4 14

Windows cannot authenticate with Freeradius
by Matthew Pulis 03 Sep '17

03 Sep '17

Hi My Windows clients (Win 7 and Win 10) cannot authenticate with Freeradius due to this error: routines:ssl3_read_bytes:tlsv1 alert unknown ca I have searched a bit around and seems to be a problem with the CA certification of the server. Is that correct? As far as I remember last year it was working, but now that I restarted the project and am planning to finalise it, we are getting this error. Maybe something happened in Windows environment - for example some update? NB: Window clients are NOT Domain clients. The APs are Unifi. Android and iPhone clients connect without any problems. Testing using radtest works fine too, as you can see in the log I haven't touched Freeradius these past 12 months and I forgot what I did, so please try to be verbose with your answers - thanks beforehand for the patience and support. The lines marked red in the debug are the below: (21) eap_peap: Continuing EAP-TLS (21) eap_peap: Peer indicated complete TLS record size will be 7 bytes (21) eap_peap: Got complete TLS record (7 bytes) (21) eap_peap: [eaptls verify] = length included (21) eap_peap: <<< recv TLS 1.0 Alert [length 0002], fatal unknown_ca (21) eap_peap: ERROR: TLS Alert read:fatal:unknown CA (21) eap_peap: ERROR: TLS_accept: Failed in unknown state (21) eap_peap: ERROR: Failed in __FUNCTION__ (SSL_read) (21) eap_peap: ERROR: error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca (21) eap_peap: ERROR: error:140940E5:SSL routines:ssl3_read_bytes:ssl handshake failure (21) eap_peap: ERROR: System call (I/O) error (-1) (21) eap_peap: ERROR: TLS receive handshake failed during operation (21) eap_peap: ERROR: [eaptls process] = fail (21) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (21) eap: Sending EAP Failure (code 4) ID 216 length 4 The full log is here: (WARNING 1700 lines) radius@radius:~$ freeradius -X FreeRADIUS Version 3.0.15 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf Unable to open file "/etc/freeradius/radiusd.conf": Permission denied Errors reading or parsing /etc/freeradius/radiusd.conf radius@radius:~$ sudo freeradius -X FreeRADIUS Version 3.0.15 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/adldap including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/ldap including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/replicate including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/operator-name including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 192.168.100.1/24 { require_message_authenticator = no secret = <<< secret >>> shortname = "NAS" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 192.168.100.1/24. Please fix your configuration Support for old-style clients will be removed in a future release Debugger not attached # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_ldap # Loading module "adldap" from file /etc/freeradius/mods-enabled/adldap ldap adldap { server = "localhost" identity = "cn=admin,dc=seminary,dc=local" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "ou=School,dc=seminary,dc=ad" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute adldap-LDAP-Group # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap ldap { server = "localhost" identity = "cn=admin,dc=seminary,dc=local" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "ou=SeminaryOU,dc=seminary,dc=local" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate instantiate { } # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "adldap" from file /etc/freeradius/mods-enabled/adldap rlm_ldap: libldap vendor: OpenLDAP, version: 20442 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (adldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (adldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful rlm_ldap (adldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful rlm_ldap (adldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful rlm_ldap (adldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful rlm_ldap (adldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/ldap accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} Ignoring "sql" (see raddb/mods-available/README.rst) } # server inner-tunnel server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 37407 Listening on proxy address :: port 50037 Ready to process requests # (0) Received Access-Request Id 123 from 192.168.100.114:56557 to 192.168.100.201:1812 length 173 (0) User-Name = "pmatthew28" (0) NAS-Identifier = "802aa849cbcc" (0) NAS-Port = 0 (0) Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi" (0) Calling-Station-Id = "00-22-FB-6E-1D-C8" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) EAP-Message = 0x02ec000f01706d6174746865773238 (0) Message-Authenticator = 0x935cdf979e338f0c23f870035d1b1efd (0) # Executing section authorize from file /etc/freeradius/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "pmatthew28", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 236 length 15 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: Initiating new EAP-TLS session (0) eap_ttls: Flushing SSL sessions (of #0) (0) eap_ttls: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 237 length 6 (0) eap: EAP session adding &reply:State = 0x267c1fc626910a3a (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) Sent Access-Challenge Id 123 from 192.168.100.201:1812 to 192.168.100.114:56557 length 0 (0) EAP-Message = 0x01ed00061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x267c1fc626910a3a34f2d43cba74c1f8 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 124 from 192.168.100.114:56557 to 192.168.100.201:1812 length 182 (1) User-Name = "pmatthew28" (1) NAS-Identifier = "802aa849cbcc" (1) NAS-Port = 0 (1) Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi" (1) Calling-Station-Id = "00-22-FB-6E-1D-C8" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) EAP-Message = 0x02ed00060319 (1) State = 0x267c1fc626910a3a34f2d43cba74c1f8 (1) Message-Authenticator = 0x2e5395829bafc4df41523bf2696fb810 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "pmatthew28", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 237 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop rlm_ldap (ldap): Closing connection (0): Hit idle_timeout, was idle for 72 seconds rlm_ldap (ldap): Closing connection (1): Hit idle_timeout, was idle for 72 seconds rlm_ldap (ldap): Closing connection (2): Hit idle_timeout, was idle for 72 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing connection (3): Hit idle_timeout, was idle for 72 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing connection (4): Hit idle_timeout, was idle for 72 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (5), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (5) (1) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (1) ldap: --> (cn=pmatthew28) (1) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=pmatthew28)", scope "sub" (1) ldap: Waiting for search result... (1) ldap: User object found at DN "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (1) ldap: Processing user attributes (1) ldap: control:Password-With-Header += '{SSHA}MJQyy9ahOjIexdTm6qaygw/ne5qDGF07' rlm_ldap (ldap): Released connection (5) Need 2 more connections to reach min connections (3) rlm_ldap (ldap): Opening additional connection (6), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) [ldap] = updated rlm_ldap (adldap): Closing connection (0): Hit idle_timeout, was idle for 72 seconds rlm_ldap (adldap): Closing connection (1): Hit idle_timeout, was idle for 72 seconds rlm_ldap (adldap): Closing connection (2): Hit idle_timeout, was idle for 72 seconds rlm_ldap (adldap): You probably need to lower "min" rlm_ldap (adldap): Closing connection (3): Hit idle_timeout, was idle for 72 seconds rlm_ldap (adldap): You probably need to lower "min" rlm_ldap (adldap): Closing connection (4): Hit idle_timeout, was idle for 72 seconds rlm_ldap (adldap): You probably need to lower "min" rlm_ldap (adldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (adldap): Opening additional connection (5), 1 of 32 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful rlm_ldap (adldap): Reserved connection (5) (1) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (1) adldap: --> (cn=pmatthew28) (1) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with filter "(cn=pmatthew28)", scope "sub" (1) adldap: Waiting for search result... (1) adldap: The specified DN wasn't found (1) adldap: Search returned no results rlm_ldap (adldap): Released connection (5) Need 2 more connections to reach min connections (3) rlm_ldap (adldap): Opening additional connection (6), 1 of 31 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful (1) [adldap] = notfound (1) [expiration] = noop (1) [logintime] = noop (1) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password (1) pap: Removing &control:Password-With-Header (1) pap: Normalizing SSHA1-Password from base64 encoding, 32 bytes -> 24 bytes (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x267c1fc626910a3a (1) eap: Finished EAP session with state 0x267c1fc626910a3a (1) eap: Previous EAP request found for state 0x267c1fc626910a3a, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new EAP-TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 238 length 6 (1) eap: EAP session adding &reply:State = 0x267c1fc62792063a (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) Sent Access-Challenge Id 124 from 192.168.100.201:1812 to 192.168.100.114:56557 length 0 (1) EAP-Message = 0x01ee00061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x267c1fc62792063a34f2d43cba74c1f8 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 125 from 192.168.100.114:56557 to 192.168.100.201:1812 length 289 (2) User-Name = "pmatthew28" (2) NAS-Identifier = "802aa849cbcc" (2) NAS-Port = 0 (2) Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi" (2) Calling-Station-Id = "00-22-FB-6E-1D-C8" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) EAP-Message = 0x02ee007119800000006716030100620100005e030159a852b0c113d1c128d7b866d3c3be37b34dc8855e795b91a72288e8b3f09ebc00001cc014c013003900330035002fc00ac00900380032000a00130005000401000019000a0006000400170018000b0002010000170000ff01000100 (2) State = 0x267c1fc62792063a34f2d43cba74c1f8 (2) Message-Authenticator = 0x4933ab887ba70d70078755d218643b42 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "pmatthew28", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 238 length 113 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x267c1fc62792063a (2) eap: Finished EAP session with state 0x267c1fc62792063a (2) eap: Previous EAP request found for state 0x267c1fc62792063a, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 103 bytes (2) eap_peap: Got complete TLS record (103 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before/accept initialization (2) eap_peap: TLS_accept: before/accept initialization (2) eap_peap: <<< recv TLS 1.0 Handshake [length 0062], ClientHello (2) eap_peap: TLS_accept: unknown state (2) eap_peap: >>> send TLS 1.0 Handshake [length 0059], ServerHello (2) eap_peap: TLS_accept: unknown state (2) eap_peap: >>> send TLS 1.0 Handshake [length 0973], Certificate (2) eap_peap: TLS_accept: unknown state (2) eap_peap: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange (2) eap_peap: TLS_accept: unknown state (2) eap_peap: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone (2) eap_peap: TLS_accept: unknown state (2) eap_peap: TLS_accept: unknown state (2) eap_peap: TLS_accept: unknown state (2) eap_peap: TLS_accept: Need to read more data: unknown state (2) eap_peap: TLS_accept: Need to read more data: unknown state (2) eap_peap: In SSL Handshake Phase (2) eap_peap: In SSL Accept mode (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 239 length 1004 (2) eap: EAP session adding &reply:State = 0x267c1fc62493063a (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) Sent Access-Challenge Id 125 from 192.168.100.201:1812 to 192.168.100.114:56557 length 0 (2) EAP-Message = 0x01ef03ec19c000000b2f1603010059020000550301879dfd797e3be608b98698d42e2e9031f29cb8388662304dbb3b25d6125387ed2029b731a7c8ce9c152b353a6ef6f9000ba9d2037153ea88d81c46e02f28666df2c01400000dff01000100000b00040300010216030109730b00096f00096c000420 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x267c1fc62493063a34f2d43cba74c1f8 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 126 from 192.168.100.114:56557 to 192.168.100.201:1812 length 182 (3) User-Name = "pmatthew28" (3) NAS-Identifier = "802aa849cbcc" (3) NAS-Port = 0 (3) Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi" (3) Calling-Station-Id = "00-22-FB-6E-1D-C8" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) EAP-Message = 0x02ef00061900 (3) State = 0x267c1fc62493063a34f2d43cba74c1f8 (3) Message-Authenticator = 0x600eef4f6dda8d2c8b90ff01479a5c7b (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "pmatthew28", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 239 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x267c1fc62493063a (3) eap: Finished EAP session with state 0x267c1fc62493063a (3) eap: Previous EAP request found for state 0x267c1fc62493063a, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 240 length 1000 (3) eap: EAP session adding &reply:State = 0x267c1fc6258c063a (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) Sent Access-Challenge Id 126 from 192.168.100.201:1812 to 192.168.100.114:56557 length 0 (3) EAP-Message = 0x01f003e81940b3d95dd2ed6bc14f8008ac4ccb42e7eb0200a8d70b9a3d9e451cf4e0f645302d933d25af330480c89609c676a8b21f5463d0d83293c3d96e1f52034ec62a147f95d27b9a6f34ab0a97a3b7a366601166a86c0409ece2b9ddc79831d2c39f79903774d273ae6afca66797b43da5bef25a50 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x267c1fc6258c063a34f2d43cba74c1f8 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 127 from 192.168.100.114:56557 to 192.168.100.201:1812 length 182 (4) User-Name = "pmatthew28" (4) NAS-Identifier = "802aa849cbcc" (4) NAS-Port = 0 (4) Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi" (4) Calling-Station-Id = "00-22-FB-6E-1D-C8" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) EAP-Message = 0x02f000061900 (4) State = 0x267c1fc6258c063a34f2d43cba74c1f8 (4) Message-Authenticator = 0xecea56c093bd1ae270396b6b5d36a48e (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "pmatthew28", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 240 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x267c1fc6258c063a (4) eap: Finished EAP session with state 0x267c1fc6258c063a (4) eap: Previous EAP request found for state 0x267c1fc6258c063a, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 241 length 881 (4) eap: EAP session adding &reply:State = 0x267c1fc6228d063a (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) Sent Access-Challenge Id 127 from 192.168.100.201:1812 to 192.168.100.114:56557 length 0 (4) EAP-Message = 0x01f10371190013024d54310e300c06035504080c0552616261743112301006035504070c0954616c2d566972747531223020060355040a0c195468652041726368626973686f70732053656d696e6172792e3128302606092a864886f70d0109011619746563686e6963616c4073656d696e6172792e6f (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x267c1fc6228d063a34f2d43cba74c1f8 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 128 from 192.168.100.114:56557 to 192.168.100.201:1812 length 193 (5) User-Name = "pmatthew28" (5) NAS-Identifier = "802aa849cbcc" (5) NAS-Port = 0 (5) Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi" (5) Calling-Station-Id = "00-22-FB-6E-1D-C8" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) EAP-Message = 0x02f1001119800000000715030100020230 (5) State = 0x267c1fc6228d063a34f2d43cba74c1f8 (5) Message-Authenticator = 0x52230ebc6ccc584dab38acbe01dc3884 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "pmatthew28", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 241 length 17 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x267c1fc6228d063a (5) eap: Finished EAP session with state 0x267c1fc6228d063a (5) eap: Previous EAP request found for state 0x267c1fc6228d063a, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 7 bytes (5) eap_peap: Got complete TLS record (7 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: <<< recv TLS 1.0 Alert [length 0002], fatal unknown_ca (5) eap_peap: ERROR: TLS Alert read:fatal:unknown CA (5) eap_peap: ERROR: TLS_accept: Failed in unknown state (5) eap_peap: ERROR: Failed in __FUNCTION__ (SSL_read) (5) eap_peap: ERROR: error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca (5) eap_peap: ERROR: error:140940E5:SSL routines:ssl3_read_bytes:ssl handshake failure (5) eap_peap: ERROR: System call (I/O) error (-1) (5) eap_peap: ERROR: TLS receive handshake failed during operation (5) eap_peap: ERROR: [eaptls process] = fail (5) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (5) eap: Sending EAP Failure (code 4) ID 241 length 4 (5) eap: Failed in EAP select (5) [eap] = invalid (5) } # authenticate = invalid (5) Failed to authenticate the user (5) Using Post-Auth-Type Reject (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) Post-Auth-Type REJECT { (5) attr_filter.access_reject: EXPAND %{User-Name} (5) attr_filter.access_reject: --> pmatthew28 (5) attr_filter.access_reject: Matched entry DEFAULT at line 11 (5) [attr_filter.access_reject] = updated (5) [eap] = noop (5) policy remove_reply_message_if_eap { (5) if (&reply:EAP-Message && &reply:Reply-Message) { (5) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (5) else { (5) [noop] = noop (5) } # else = noop (5) } # policy remove_reply_message_if_eap = noop (5) } # Post-Auth-Type REJECT = updated (5) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (5) Sending delayed response (5) Sent Access-Reject Id 128 from 192.168.100.201:1812 to 192.168.100.114:56557 length 44 (5) EAP-Message = 0x04f10004 (5) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 123 with timestamp +72 (1) Cleaning up request packet ID 124 with timestamp +72 (2) Cleaning up request packet ID 125 with timestamp +72 (3) Cleaning up request packet ID 126 with timestamp +72 (4) Cleaning up request packet ID 127 with timestamp +72 (5) Cleaning up request packet ID 128 with timestamp +72 Ready to process requests WORKING FROM RADTEST (15) Received Access-Request Id 46 from 127.0.0.1:42690 to 127.0.0.1:1812 length 80 (15) User-Name = "pmatthew28" (15) User-Password = "SerTaqbizli!3007" (15) NAS-IP-Address = 127.0.1.1 (15) NAS-Port = 1812 (15) Message-Authenticator = 0x44b7f7f1c0e39d7cba3cfe782ecb75bc (15) # Executing section authorize from file /etc/freeradius/sites-enabled/default (15) authorize { (15) policy filter_username { (15) if (&User-Name) { (15) if (&User-Name) -> TRUE (15) if (&User-Name) { (15) if (&User-Name =~ /@[^@]*@/ ) { (15) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (15) if (&User-Name =~ /\.\./ ) { (15) if (&User-Name =~ /\.\./ ) -> FALSE (15) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (15) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (15) if (&User-Name =~ /\.$/) { (15) if (&User-Name =~ /\.$/) -> FALSE (15) if (&User-Name =~ /(a)\./) { (15) if (&User-Name =~ /(a)\./) -> FALSE (15) } # if (&User-Name) = notfound (15) } # policy filter_username = notfound (15) [preprocess] = ok (15) [chap] = noop (15) [mschap] = noop (15) suffix: Checking for suffix after "@" (15) suffix: No '@' in User-Name = "pmatthew28", looking up realm NULL (15) suffix: No such realm "NULL" (15) [suffix] = noop (15) eap: No EAP-Message, not doing EAP (15) [eap] = noop (15) [files] = noop rlm_ldap (ldap): Reserved connection (9) (15) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (15) ldap: --> (cn=pmatthew28) (15) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=pmatthew28)", scope "sub" (15) ldap: Waiting for search result... (15) ldap: User object found at DN "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (15) ldap: Processing user attributes (15) ldap: control:Password-With-Header += '{SSHA}MJQyy9ahOjIexdTm6qaygw/ne5qDGF07' rlm_ldap (ldap): Released connection (9) Need 7 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (10), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (15) [ldap] = updated rlm_ldap (adldap): Reserved connection (7) (15) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (15) adldap: --> (cn=pmatthew28) (15) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with filter "(cn=pmatthew28)", scope "sub" (15) adldap: Waiting for search result... (15) adldap: The specified DN wasn't found (15) adldap: Search returned no results rlm_ldap (adldap): Released connection (7) Need 7 more connections to reach 10 spares rlm_ldap (adldap): Opening additional connection (10), 1 of 29 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful (15) [adldap] = notfound (15) [expiration] = noop (15) [logintime] = noop (15) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password (15) pap: Removing &control:Password-With-Header (15) pap: Normalizing SSHA1-Password from base64 encoding, 32 bytes -> 24 bytes (15) [pap] = updated (15) } # authorize = updated (15) Found Auth-Type = PAP (15) # Executing group from file /etc/freeradius/sites-enabled/default (15) Auth-Type PAP { (15) pap: Login attempt with password (15) pap: Comparing with "known-good" SSHA-Password (15) pap: User authenticated successfully (15) [pap] = ok rlm_ldap (ldap): Reserved connection (8) (15) ldap: Login attempt by "pmatthew28" (15) ldap: Using user DN from request "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (15) ldap: Waiting for bind result... (15) ldap: Bind successful (15) ldap: Bind as user "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" was successful rlm_ldap (ldap): Released connection (8) (15) [ldap] = ok rlm_ldap (adldap): Reserved connection (9) (15) adldap: Login attempt by "pmatthew28" (15) adldap: Using user DN from request "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (15) adldap: Waiting for bind result... (15) adldap: Bind successful (15) adldap: Bind as user "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" was successful rlm_ldap (adldap): Released connection (9) (15) [adldap] = ok (15) } # Auth-Type PAP = ok (15) # Executing section post-auth from file /etc/freeradius/sites-enabled/default (15) post-auth { (15) update { (15) No attributes updated (15) } # update = noop (15) if (Ldap-Group == "cn=Teachers,ou=School,dc=seminary,dc=ad") { (15) Searching for user in group "cn=Teachers,ou=School,dc=seminary,dc=ad" rlm_ldap (ldap): Reserved connection (7) (15) Using user DN from request "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (15) Checking user object's memberOf attributes (15) Performing unfiltered search in "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope "base" (15) Waiting for search result... (15) Processing memberOf value "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN rlm_ldap (ldap): Released connection (7) (15) User is not a member of "cn=Teachers,ou=School,dc=seminary,dc=ad" (15) if (Ldap-Group == "cn=Teachers,ou=School,dc=seminary,dc=ad") -> FALSE (15) if (Ldap-Group == "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local") { (15) Searching for user in group "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (9) (15) Using user DN from request "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (15) Checking user object's memberOf attributes (15) Performing unfiltered search in "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope "base" (15) Waiting for search result... (15) Processing memberOf value "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN rlm_ldap (ldap): Released connection (9) (15) User is not a member of "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local" (15) if (Ldap-Group == "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local") -> FALSE (15) if (Ldap-Group == "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local") { (15) Searching for user in group "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (10) (15) Using user DN from request "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (15) Checking user object's memberOf attributes (15) Performing unfiltered search in "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope "base" (15) Waiting for search result... (15) Processing memberOf value "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN rlm_ldap (ldap): Released connection (10) (15) User is not a member of "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local" (15) if (Ldap-Group == "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local") -> FALSE (15) if (Ldap-Group == "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local") { (15) Searching for user in group "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (8) (15) Using user DN from request "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (15) Checking user object's memberOf attributes (15) Waiting for bind result... (15) Bind successful (15) Performing unfiltered search in "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope "base" (15) Waiting for search result... (15) Processing memberOf value "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN (15) User found in group DN "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local". Comparison between membership: dn, check: dn rlm_ldap (ldap): Released connection (8) (15) if (Ldap-Group == "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local") -> TRUE (15) if (Ldap-Group == "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local") { (15) update reply { (15) Tunnel-Type = VLAN (15) Tunnel-Medium-Type = IEEE-802 (15) Tunnel-Private-Group-ID = "11" (15) } # update reply = noop (15) } # if (Ldap-Group == "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local") = noop (15) if (Ldap-Group == "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local") { (15) Searching for user in group "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (7) (15) Using user DN from request "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (15) Checking user object's memberOf attributes (15) Performing unfiltered search in "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope "base" (15) Waiting for search result... (15) Processing memberOf value "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN rlm_ldap (ldap): Released connection (7) (15) User is not a member of "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local" (15) if (Ldap-Group == "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local") -> FALSE (15) if (Ldap-Group == "cn=School,ou=SeminaryOU,dc=seminary,dc=local") { (15) Searching for user in group "cn=School,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (9) (15) Using user DN from request "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (15) Checking user object's memberOf attributes (15) Performing unfiltered search in "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope "base" (15) Waiting for search result... (15) Processing memberOf value "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN rlm_ldap (ldap): Released connection (9) (15) User is not a member of "cn=School,ou=SeminaryOU,dc=seminary,dc=local" (15) if (Ldap-Group == "cn=School,ou=SeminaryOU,dc=seminary,dc=local") -> FALSE (15) ldap: EXPAND . (15) ldap: --> . (15) ldap: EXPAND Authenticated at %S (15) ldap: --> Authenticated at 2017-08-31 20:23:26 rlm_ldap (ldap): Reserved connection (10) (15) ldap: Using user DN from request "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (15) ldap: Modifying object with DN "cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (15) ldap: Waiting for modify result... rlm_ldap (ldap): Released connection (10) (15) [ldap] = ok (15) [exec] = noop (15) policy remove_reply_message_if_eap { (15) if (&reply:EAP-Message && &reply:Reply-Message) { (15) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (15) else { (15) [noop] = noop (15) } # else = noop (15) } # policy remove_reply_message_if_eap = noop (15) } # post-auth = ok (15) Sent Access-Accept Id 46 from 127.0.0.1:1812 to 127.0.0.1:42690 length 0 (15) Tunnel-Type = VLAN (15) Tunnel-Medium-Type = IEEE-802 (15) Tunnel-Private-Group-Id = "11" (15) Finished request Waking up in 4.9 seconds. Matthew Pulis mobile / WhatsApp: +356 79539404

4 8

Crashes FreeRadius 3.0.11 using rlm_rest/libcurl + rlm_cache_rbtree
by RANJALAHY RASOLOFOMANANA, Bija 01 Sep '17

01 Sep '17

Hi all, We are frequently facing a crash of our freeradius server on live production environment (8 times in 2 months). The crash can't be reproduced on our test environment so we need help. Sometimes, we have a core dump (case 1- the server crashes), sometimes, we don't (case 2- the server freezes). Unfortunately, the core dumps don't provide useful informations: Here are examples of the core dumps : core 1: #0 0x00000034b680f5db in ?? () #1 0x00007fa718d066c6 in ?? () #2 0x0000000000000000 in ?? () core 2: #0 0x00000034b680f5db in ?? () #1 0x00007f169f94e6c6 in ?? () #2 0x0000000000000000 in ?? () Freeradius version : 3.0.11 Context : our server sends REST request to a http server to retrieve data which are then stored in a cache during 1 hour. The problem started when we added this feature. Leads : 1- The server logs all http requests that are sent. Somehow, the line log is truncated when the problem appears. Maybe, it is just a coincidence but we are suspecting this part. We use the rlm_rest module + libcurl to make our requests. Have you encountered a problem using those module/library ? We tried to upgrade libcurl from 7.50.3 to 7.54.0 but this doesn't fix the problem. 2- In the case 2 (the server freezes), we've got the following message in our log files: Mon Jun 26 22:00:31 2017 : Error: (10180900) Ignoring duplicate packet from client xxx port 21665 - ID: 164 due to unfinished request in component authorize module <our cache module> Our cache module is based on the rlm_cache_rbtree module: cache <cache name> { driver = "rlm_cache_rbtree" Have you encountered a problem using rlm_cache_rbtree module ? Thanks for your help. This message contains information that may be privileged or confidential and is the property of the Capgemini Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message.

5 11

Freeradius Proxy - Framed IP Address Accounting attribute
by Byron Jeffery 01 Sep '17

01 Sep '17

Hi All We are trailing a wifi system that does not send through the Framed IP Address attribute to our accounting server after the clients have successfully authenticated (EAP-PEAP-MSCHAP authentication) against a FreeRadius server hosted at another site within our WAN. I am of the mindset of setting up a Freeradius proxy server locally onsite with the purpose of sending back an accounting start with the Framed IP Address attribute to the accounting server but am unsure if this is even possible as I am unsure if the freeradius server would be able to determine the clients IP address as only the clients MAC address is passed to the radius server during authentication. I was unable to find any documentation that would support this, and would hope that someone could point me in the right direction. - Regards - Byron

5 21