March 2018 - Freeradius-Users - lists.freeradius.org

Problem when using load balancer
by Talel Krimi 28 Mar '18

28 Mar '18

Hello my freeradius server works fine and I tested it using radperf but when i user nginx load balancer it stuck on cleaning up request any help thank you

2 2

Radius Testing. EAP-TTLS, (GTC - PAP) SSHA Password
by Mitch Sullivan 28 Mar '18

28 Mar '18

Hi Freeradius Legends. I've been rolling out an instance of freeradius in our environment. The documentation has been terrific and this mailing list also very helpful very helpful I'm trying to use EAP - TTLS for authentication. I can bind to our IPA server without issue. I made a testing environment and was able to get accept packets without issue. However, while trying to test self-signed certificates in our live environment I encounter issue with what looks like problems with hashed passwords. (I think IPA uses salted MD5 hash passwords by default, but our environment uses SSHA1 passwords due to a migration from openLDAP). My implementation steps are. Install freeradius and freeradius ldap remove testing certs and generate self signed certs edit ldap module to bind to our IPA edit EAP module to set type to TTLS, input certificate info, and set TTLS tunnel type to GTC add Wifi AP to clients.conf below is the output from debug mode. I've blanked out any company information for security purposes. FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/ldap including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client ap1 { ipaddr = 10.0.2.2 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_ldap # Loading module "ldap" from file /etc/raddb/mods-enabled/ldap ldap { server = "PRIVATE" identity = "cn=PRIVATE" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "cn=users,cn=accounts,dc=swarm64,dc=com" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "gtc" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20444 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://ipa.swarm64.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://ipa.swarm64.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://ipa.swarm64.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://ipa.swarm64.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://ipa.swarm64.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:330 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 43837 Listening on proxy address :: port 56979 Ready to process requests (0) Received Access-Request Id 40 from 10.0.2.2:57793 to 10.0.2.15:1812 length 179 (0) User-Name = "PRIVATE" (0) NAS-Identifier = "802aa893e8b6" (0) NAS-Port = 0 (0) Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm" (0) Calling-Station-Id = "08-E6-89-0E-B6-C4" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) EAP-Message = 0x02110013016d697463682e73756c6c6976616e (0) Message-Authenticator = 0x2ce888a5b88a1f64a3bba17252e1ee69 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 17 length 19 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: Initiating new EAP-TLS session (0) eap_ttls: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 18 length 6 (0) eap: EAP session adding &reply:State = 0xb938bff5b92aaa4a (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 40 from 10.0.2.15:1812 to 10.0.2.2:57793 length 0 (0) EAP-Message = 0x011200061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xb938bff5b92aaa4a056aeaca0b53c293 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 41 from 10.0.2.2:57793 to 10.0.2.15:1812 length 339 (1) User-Name = "mitch.sullivan" (1) NAS-Identifier = "802aa893e8b6" (1) NAS-Port = 0 (1) Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm" (1) Calling-Station-Id = "08-E6-89-0E-B6-C4" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) EAP-Message = 0x021200a115800000009716030100920100008e03035abb6b8e83350c77c09873b809dc9e20570af75ef7c2c3b8891fe282c7c1628e00002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00 (1) State = 0xb938bff5b92aaa4a056aeaca0b53c293 (1) Message-Authenticator = 0x69af12aa9f108a127e6ce26e676635fa (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 18 length 161 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xb938bff5b92aaa4a (1) eap: Finished EAP session with state 0xb938bff5b92aaa4a (1) eap: Previous EAP request found for state 0xb938bff5b92aaa4a, released from the list (1) eap: Peer sent packet with method EAP TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Authenticate (1) eap_ttls: Continuing EAP-TLS (1) eap_ttls: Peer indicated complete TLS record size will be 151 bytes (1) eap_ttls: Got complete TLS record (151 bytes) (1) eap_ttls: [eaptls verify] = length included (1) eap_ttls: (other): before/accept initialization (1) eap_ttls: TLS_accept: before/accept initialization (1) eap_ttls: <<< recv TLS 1.2 [length 0092] (1) eap_ttls: TLS_accept: SSLv3 read client hello A (1) eap_ttls: >>> send TLS 1.2 [length 0039] (1) eap_ttls: TLS_accept: SSLv3 write server hello A (1) eap_ttls: >>> send TLS 1.2 [length 088d] (1) eap_ttls: TLS_accept: SSLv3 write certificate A (1) eap_ttls: >>> send TLS 1.2 [length 014d] (1) eap_ttls: TLS_accept: SSLv3 write key exchange A (1) eap_ttls: >>> send TLS 1.2 [length 0004] (1) eap_ttls: TLS_accept: SSLv3 write server done A (1) eap_ttls: TLS_accept: SSLv3 flush data (1) eap_ttls: TLS_accept: SSLv3 read client certificate A (1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client key exchange A (1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client key exchange A (1) eap_ttls: In SSL Handshake Phase (1) eap_ttls: In SSL Accept mode (1) eap_ttls: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 19 length 1004 (1) eap: EAP session adding &reply:State = 0xb938bff5b82baa4a (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 41 from 10.0.2.15:1812 to 10.0.2.2:57793 length 0 (1) EAP-Message = 0x011303ec15c000000a2b1603030039020000350303a9ba92ba1ee869e774573a3bcd55bf89b7e57b7536b11691a6a1b9867e26a4d000c03000000dff01000100000b000403000102160303088d0b0008890008860003c5308203c1308202a9a003020102020101300d06092a864886f70d01010b050030 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xb938bff5b82baa4a056aeaca0b53c293 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 42 from 10.0.2.2:57793 to 10.0.2.15:1812 length 184 (2) User-Name = "mitch.sullivan" (2) NAS-Identifier = "802aa893e8b6" (2) NAS-Port = 0 (2) Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm" (2) Calling-Station-Id = "08-E6-89-0E-B6-C4" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) EAP-Message = 0x021300061500 (2) State = 0xb938bff5b82baa4a056aeaca0b53c293 (2) Message-Authenticator = 0x276bba10619ba2754d0d8569ac713df9 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 19 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xb938bff5b82baa4a (2) eap: Finished EAP session with state 0xb938bff5b82baa4a (2) eap: Previous EAP request found for state 0xb938bff5b82baa4a, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: Continuing EAP-TLS (2) eap_ttls: Peer ACKed our handshake fragment (2) eap_ttls: [eaptls verify] = request (2) eap_ttls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 20 length 1004 (2) eap: EAP session adding &reply:State = 0xb938bff5bb2caa4a (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 42 from 10.0.2.15:1812 to 10.0.2.2:57793 length 0 (2) EAP-Message = 0x011403ec15c000000a2b23805e4d8a2ddc7e25f8e0148d1fc8b6ee49313359a4166de758c9f7d6319d4dc254391900857fe9c5321350e52e1cf40004bb308204b73082039fa003020102020900ee8187b851c53ea0300d06092a864886f70d01010b0500308184310b3009060355040613024445310f30 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xb938bff5bb2caa4a056aeaca0b53c293 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 43 from 10.0.2.2:57793 to 10.0.2.15:1812 length 184 (3) User-Name = "mitch.sullivan" (3) NAS-Identifier = "802aa893e8b6" (3) NAS-Port = 0 (3) Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm" (3) Calling-Station-Id = "08-E6-89-0E-B6-C4" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) EAP-Message = 0x021400061500 (3) State = 0xb938bff5bb2caa4a056aeaca0b53c293 (3) Message-Authenticator = 0x0ebfb935074c09e0cf8e9b06d51575af (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 20 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xb938bff5bb2caa4a (3) eap: Finished EAP session with state 0xb938bff5bb2caa4a (3) eap: Previous EAP request found for state 0xb938bff5bb2caa4a, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: Continuing EAP-TLS (3) eap_ttls: Peer ACKed our handshake fragment (3) eap_ttls: [eaptls verify] = request (3) eap_ttls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 21 length 625 (3) eap: EAP session adding &reply:State = 0xb938bff5ba2daa4a (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 43 from 10.0.2.15:1812 to 10.0.2.2:57793 length 0 (3) EAP-Message = 0x01150271158000000a2bf70d01010b0500038201010057656da77bec697e07a15db071ef53510b58acfd5bb16b0d4fa3b9983fafd781fa075adbebb0f1a7e83fa9f251cd17784c6031ae311c7da76226bad76b53ed9a169407df51abb0d7a42e18933e94d070206a664963bf7bcf632d798616ea946797 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xb938bff5ba2daa4a056aeaca0b53c293 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 44 from 10.0.2.2:57793 to 10.0.2.15:1812 length 314 (4) User-Name = "mitch.sullivan" (4) NAS-Identifier = "802aa893e8b6" (4) NAS-Port = 0 (4) Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm" (4) Calling-Station-Id = "08-E6-89-0E-B6-C4" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) EAP-Message = 0x0215008815800000007e16030300461000004241046482a8b543b2d9b8d2e72f7e7df5812c7a34eff35c29db2c2e756ebd23804b5a4c24a15d2ea8c9a9f185c0e59a78a3bea1c9ed005a4c2a4c6d2cc2f52c2ebaa01403030001011603030028e5df197cdec48e6a5f2386be95c6700f0606ab69cd2aff (4) State = 0xb938bff5ba2daa4a056aeaca0b53c293 (4) Message-Authenticator = 0xb331a4f28a554cf3b11a82c0c09c67c8 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 21 length 136 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xb938bff5ba2daa4a (4) eap: Finished EAP session with state 0xb938bff5ba2daa4a (4) eap: Previous EAP request found for state 0xb938bff5ba2daa4a, released from the list (4) eap: Peer sent packet with method EAP TTLS (21) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: Authenticate (4) eap_ttls: Continuing EAP-TLS (4) eap_ttls: Peer indicated complete TLS record size will be 126 bytes (4) eap_ttls: Got complete TLS record (126 bytes) (4) eap_ttls: [eaptls verify] = length included (4) eap_ttls: <<< recv TLS 1.2 [length 0046] (4) eap_ttls: TLS_accept: SSLv3 read client key exchange A (4) eap_ttls: TLS_accept: SSLv3 read certificate verify A (4) eap_ttls: <<< recv TLS 1.2 [length 0001] (4) eap_ttls: <<< recv TLS 1.2 [length 0010] (4) eap_ttls: TLS_accept: SSLv3 read finished A (4) eap_ttls: >>> send TLS 1.2 [length 0001] (4) eap_ttls: TLS_accept: SSLv3 write change cipher spec A (4) eap_ttls: >>> send TLS 1.2 [length 0010] (4) eap_ttls: TLS_accept: SSLv3 write finished A (4) eap_ttls: TLS_accept: SSLv3 flush data (4) eap_ttls: (other): SSL negotiation finished successfully (4) eap_ttls: SSL Connection Established (4) eap_ttls: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 22 length 61 (4) eap: EAP session adding &reply:State = 0xb938bff5bd2eaa4a (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 44 from 10.0.2.15:1812 to 10.0.2.2:57793 length 0 (4) EAP-Message = 0x0116003d15800000003314030300010116030300286f61d365e37761ef674a2ff8c5af83927277ef86e370d9714c2bbe655bc3e61ad1dced6cda3c6e93 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xb938bff5bd2eaa4a056aeaca0b53c293 (4) Finished request Waking up in 2.1 seconds. (5) Received Access-Request Id 45 from 10.0.2.2:57793 to 10.0.2.15:1812 length 245 (5) User-Name = "mitch.sullivan" (5) NAS-Identifier = "802aa893e8b6" (5) NAS-Port = 0 (5) Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm" (5) Calling-Station-Id = "08-E6-89-0E-B6-C4" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) EAP-Message = 0x021600431580000000391703030034e5df197cdec48e6b14e9d997a3ef7941456ca4ebd3bebe9b401bb253eaea7d1aebb558386984e4037ac1901292c4df80fa8af7c0 (5) State = 0xb938bff5bd2eaa4a056aeaca0b53c293 (5) Message-Authenticator = 0x552c9c377d3d24c784d6f2d990e93452 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 22 length 67 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xb938bff5bd2eaa4a (5) eap: Finished EAP session with state 0xb938bff5bd2eaa4a (5) eap: Previous EAP request found for state 0xb938bff5bd2eaa4a, released from the list (5) eap: Peer sent packet with method EAP TTLS (21) (5) eap: Calling submodule eap_ttls to process data (5) eap_ttls: Authenticate (5) eap_ttls: Continuing EAP-TLS (5) eap_ttls: Peer indicated complete TLS record size will be 57 bytes (5) eap_ttls: Got complete TLS record (57 bytes) (5) eap_ttls: [eaptls verify] = length included (5) eap_ttls: [eaptls process] = ok (5) eap_ttls: Session established. Proceeding to decode tunneled attributes (5) eap_ttls: Got tunneled request (5) eap_ttls: EAP-Message = 0x02000013016d697463682e73756c6c6976616e (5) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (5) eap_ttls: Got tunneled identity of mitch.sullivan (5) eap_ttls: Setting default EAP type for tunneled EAP session (5) eap_ttls: Sending tunneled request (5) Virtual server inner-tunnel received request (5) EAP-Message = 0x02000013016d697463682e73756c6c6976616e (5) FreeRADIUS-Proxied-To = 127.0.0.1 (5) User-Name = "mitch.sullivan" (5) WARNING: Outer and inner identities are the same. User privacy is compromised. (5) server inner-tunnel { (5) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [chap] = noop (5) [mschap] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) update control { (5) &Proxy-To-Realm := LOCAL (5) } # update control = noop (5) eap: Peer sent EAP Response (code 2) ID 0 length 19 (5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (5) authenticate { (5) eap: Peer sent packet with method EAP Identity (1) (5) eap: Calling submodule eap_gtc to process data (5) eap_gtc: EXPAND Password: (5) eap_gtc: --> Password: (5) eap: Sending EAP Request (code 1) ID 1 length 15 (5) eap: EAP session adding &reply:State = 0x91427604914370d8 (5) [eap] = handled (5) } # authenticate = handled (5) } # server inner-tunnel (5) Virtual server sending reply (5) EAP-Message = 0x0101000f0650617373776f72643a20 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x91427604914370d87af3a510de6c033d (5) eap_ttls: Got tunneled Access-Challenge (5) eap: Sending EAP Request (code 1) ID 23 length 63 (5) eap: EAP session adding &reply:State = 0xb938bff5bc2faa4a (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 45 from 10.0.2.15:1812 to 10.0.2.2:57793 length 0 (5) EAP-Message = 0x0117003f15800000003517030300306f61d365e37761f0a6e5400fc157ca918fd10d59cc8f12c7c6f22335b36a0b515311cd296c6d9942f7e4822ca95e77c4 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xb938bff5bc2faa4a056aeaca0b53c293 (5) Finished request Waking up in 1.9 seconds. (6) Received Access-Request Id 46 from 10.0.2.2:57793 to 10.0.2.15:1812 length 241 (6) User-Name = "mitch.sullivan" (6) NAS-Identifier = "802aa893e8b6" (6) NAS-Port = 0 (6) Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm" (6) Calling-Station-Id = "08-E6-89-0E-B6-C4" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Connect-Info = "CONNECT 0Mbps 802.11b" (6) EAP-Message = 0x0217003f1580000000351703030030e5df197cdec48e6c2888eeb2781b8ad97d23848e1a5a632ea339aa25353843b8fda0c963c89d4065468f14f039ba7ccd (6) State = 0xb938bff5bc2faa4a056aeaca0b53c293 (6) Message-Authenticator = 0x2f1d651b69fac79c6c38fe9605a709bb (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 23 length 63 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x91427604914370d8 (6) eap: Finished EAP session with state 0xb938bff5bc2faa4a (6) eap: Previous EAP request found for state 0xb938bff5bc2faa4a, released from the list (6) eap: Peer sent packet with method EAP TTLS (21) (6) eap: Calling submodule eap_ttls to process data (6) eap_ttls: Authenticate (6) eap_ttls: Continuing EAP-TLS (6) eap_ttls: Peer indicated complete TLS record size will be 53 bytes (6) eap_ttls: Got complete TLS record (53 bytes) (6) eap_ttls: [eaptls verify] = length included (6) eap_ttls: [eaptls process] = ok (6) eap_ttls: Session established. Proceeding to decode tunneled attributes (6) eap_ttls: Got tunneled request (6) eap_ttls: EAP-Message = 0x0201000f06536f7574686167746531 (6) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_ttls: Sending tunneled request (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x0201000f06536f7574686167746531 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "mitch.sullivan" (6) State = 0x91427604914370d87af3a510de6c033d (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 1 length 15 (6) eap: No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) [files] = noop rlm_ldap (ldap): Reserved connection (0) (6) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (6) ldap: --> (uid=PRIVATE) (6) ldap: Performing search in "PRIVATE" with filter "(PRIVATE)", scope "sub" (6) ldap: Waiting for search result... (6) ldap: User object found at DN "uid=(PRIVATE)" (6) ldap: Processing user attributes (6) ldap: control:Password-With-Header += '{SSHA}h5MDNNZSAO+XIU+/xk/oLfupxBPpbBMjLs7WXA==' rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to PRIVATE rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (6) [ldap] = updated (6) [expiration] = noop (6) [logintime] = noop (6) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password (6) pap: Removing &control:Password-With-Header (6) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28 bytes (6) pap: WARNING: Auth-Type already set. Not setting to PAP (6) [pap] = noop (6) } # authorize = updated (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Expiring EAP session with state 0x91427604914370d8 (6) eap: Finished EAP session with state 0x91427604914370d8 (6) eap: Previous EAP request found for state 0x91427604914370d8, released from the list (6) eap: Peer sent packet with method EAP GTC (6) (6) eap: Calling submodule eap_gtc to process data (6) eap_gtc: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) eap_gtc: Auth-Type PAP { (6) pap: Login attempt with password (6) pap: Comparing with "known-good" SSHA-Password (6) pap: ERROR: SSHA digest does not match "known good" digest (6) pap: Passwords don't match (6) [pap] = reject (6) } # Auth-Type PAP = reject (6) eap: ERROR: Failed continuing EAP GTC (6) session. EAP sub-module failed (6) eap: Sending EAP Failure (code 4) ID 1 length 4 (6) eap: Failed in EAP select (6) [eap] = invalid (6) } # authenticate = invalid (6) Failed to authenticate the user (6) Using Post-Auth-Type Reject (6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) Post-Auth-Type REJECT { (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> mitch.sullivan (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) update outer.session-state { (6) &Module-Failure-Message := &request:Module-Failure-Message -> 'pap: SSHA digest does not match "known good" digest' (6) } # update outer.session-state = noop (6) } # Post-Auth-Type REJECT = updated (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x04010004 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_ttls: Got tunneled Access-Reject (6) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed (6) eap: Sending EAP Failure (code 4) ID 23 length 4 (6) eap: Failed in EAP select (6) [eap] = invalid (6) } # authenticate = invalid (6) Failed to authenticate the user (6) Using Post-Auth-Type Reject (6) # Executing group from file /etc/raddb/sites-enabled/default (6) Post-Auth-Type REJECT { (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> mitch.sullivan (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) [eap] = noop (6) policy remove_reply_message_if_eap { (6) if (&reply:EAP-Message && &reply:Reply-Message) { (6) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (6) else { (6) [noop] = noop (6) } # else = noop (6) } # policy remove_reply_message_if_eap = noop (6) } # Post-Auth-Type REJECT = updated (6) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (6) Sending delayed response (6) Sent Access-Reject Id 46 from 10.0.2.15:1812 to 10.0.2.2:57793 length 44 (6) EAP-Message = 0x04170004 (6) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 0.8 seconds. (0) Cleaning up request packet ID 40 with timestamp +22 (1) Cleaning up request packet ID 41 with timestamp +22 (2) Cleaning up request packet ID 42 with timestamp +22 (3) Cleaning up request packet ID 43 with timestamp +22 Waking up in 2.8 seconds. (4) Cleaning up request packet ID 44 with timestamp +25 Waking up in 0.1 seconds. (5) Cleaning up request packet ID 45 with timestamp +25 Waking up in 0.1 seconds. (6) Cleaning up request packet ID 46 with timestamp +25 Ready to process requests Thanks Mitch. Mitch.Sullivan mitch.sullivan(a)swarm64.com IT administrator | Swarm64 AS Swarm64 AS Zweigstelle Hive Ullsteinstr. 114 | 12109 Berlin | Germany

2 5

SQL query commits
by mustafa mujahid 28 Mar '18

28 Mar '18

Hi, I wanted to know how the SQL queries defined in sql.conf run "commit" on the DB, right now each time a query is executed on the DB, it is committed as well.. I would like to know if it is possible to send a commit to the DB after say 10 SQL transactions. BR/Mustafa

2 1

allow both /etc/freeradius/users and LDAP authentification
by jean-francois MONI 28 Mar '18

28 Mar '18

Hello, this is my first post, hope it's ok. I'm running a freeradius server wich allow authentification through our AD (EAP-MSCHAP auth)and it works fine. I'd like to allow authentification for our visitors by using the USERS file at the same time. WHen I add a local user, i receive an EAP/TLS error. First, I'd like to know if if it's even possible to do so. And second, a few tricks to help me to do so. thanks a lot Bye Moxx -- Jean-François MONI Technicien Informatique Centre Broca Nouvelle-Aquitaine 146 rue Léo Saignat 33076 Bordeaux Cedex

2 1

DHCP in FreeRadius 3 and logging
by Thore Krüss 28 Mar '18

28 Mar '18

Good evening, we are running a freeradius 3.0.12+dfsg-5+deb9u1 (debian stretch package). After a bit of hassle I got the dhcp module to work with the sql ippool and the general authentication. The only thing I'm missing now is a feature logging the assigned leases into the journal (authentication logging is working fine). I assumed the section in mods-enabled (see below) would do so, but apparently it doesn't. In the configuration for the dhcp virtual host I've also found no parameters which should enable logging. For convenience I've also appended the log section of freeradius -X. The log destination is set to syslog. Any help why the dhcp module does no logging or which option is missing is really appreciated. Best regards Thore ``` /etc/freeradius/3.0/mods-enabled/dhcpippool ------------------------------------------- sqlippool dhcp_sqlippool { sql_module_instance = "sql" ippool_table = "radippool" lease_duration = 7200 # Client's MAC address is mapped to Calling-Station-Id in policy.conf pool_key = "%{Calling-Station-Id}" # Use queries modified for postgres $INCLUDE ${modconfdir}/sql/ippool-dhcp/queries.conf sqlippool_log_exists = "DHCP: Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" sqlippool_log_success = "DHCP: Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" sqlippool_log_clear = "DHCP: Released IP %{Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})" sqlippool_log_failed = "DHCP: IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" sqlippool_log_nopool = "DHCP: No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" } ``` ``` /etc/freeradius/3.0/sites-enabled/dhcp (this is just the template) ------------------------------------------------------------------ server dhcp { listen { type = dhcp ipaddr = {{ ansible_default_ipv4.address }} src_ipaddr = {{ ansible_default_ipv4.address }} port = 67 interface = {{ ansible_default_ipv4.interface }} broadcast = no } dhcp DHCP-Discover { update reply { DHCP-Message-Type = DHCP-Offer } update control { &Pool-Name := "%{sql: SELECT pool_name FROM radpostauth WHERE callingstationid ILIKE replace('%{&DHCP-Client-Hardware-Address}', ':','') AND pool_name != '' ORDER BY authdate DESC LIMIT 1;}" } dhcp_sqlippool update reply { &DHCP-Domain-Name-Server = 141.70.124.5 &DHCP-Subnet-Mask = 255.255.255.252 &DHCP-Router-Address = "%{sql:SELECT framedroute FROM radippool WHERE callingstationid = '%{&DHCP-Client-Hardware-Address}' LIMIT 1;}" &DHCP-IP-Address-Lease-Time = 3600 &DHCP-DHCP-Server-Identifier = {{ ansible_default_ipv4.address }} } ok } dhcp DHCP-Request { update reply { &DHCP-Message-Type = DHCP-Ack } update control { &Pool-Name := "%{sql: SELECT pool_name FROM radpostauth WHERE callingstationid ILIKE replace('%{&DHCP-Client-Hardware-Address}', ':','') AND pool_name != '' ORDER BY authdate DESC LIMIT 1;}" } dhcp_sqlippool update reply { &DHCP-Domain-Name-Server = 141.70.124.4 &DHCP-Subnet-Mask = 255.255.255.252 &DHCP-Router-Address = "%{sql:SELECT framedroute FROM radippool WHERE callingstationid = '%{&DHCP-Client-Hardware-Address}' LIMIT 1;}" &DHCP-IP-Address-Lease-Time = 3600 &DHCP-DHCP-Server-Identifier = {{ ansible_default_ipv4.address }} } ok } dhcp DHCP-Decline { update reply { &DHCP-Message-Type = DHCP-Do-Not-Respond } reject } dhcp DHCP-Inform { update reply { &DHCP-Message-Type = DHCP-Do-Not-Respond } reject } dhcp DHCP-Release { update reply { &DHCP-Message-Type = DHCP-Do-Not-Respond } reject } } ``` from freeradius -X ``` log { stripped_names = yes auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } ```

2 1

Airspace dictionary
by Michal Gust 27 Mar '18

27 Mar '18

Hello everybody, I just want to point out that Cisco in their documentation publish few more attributes then they are in the dictionary.airspace in FreeRadius 3.0. It would be nice if somebody kindly updates the dictionary. https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config-guide/… Best Regards, Michal Gust

2 1

Change Packet-Type after proxy
by Bryce Meyer 27 Mar '18

27 Mar '18

I am running Freeradius 2.2.8 on Ubuntu 16.04. Is it possible to change the Packet Type after a proxy response? My goal is to query my home server, then if it rejects, id like to change that reject to accept and change some other attributes as well. I have it working to get a response from home server and I can change attributes but no the packet type. Any help would be greatly appreciated. Thank you, Bryce

2 3

AcctSessionTime missing in Interims-Update / calculated by FR
by Michael Markstaller 27 Mar '18

27 Mar '18

Hi, FR: 2.1.12 on Debian I have a probably easy and stupid problem: The Cisco ASA (5525-X, 9.4.4) doesn't send AcctSessionTime in "Interim-Update" so I want FR to just calculate it to be able to purge stale sessions (by a sep. cronjob) The f* ASA also doesn't send updates more than once an hour, so debugging is very time-consuming.. I have changed in /etc/freeradius/sql_log: --- cut --- Interim-Update = "UPDATE ${acct_table} \ SET AcctSessionTime = unix_timestamp(now()) - unix_timestamp(acctstarttime), \ AcctInputOctets = '%{Acct-Input-Octets}', \ AcctOutputOctets = '%{Acct-Output-Octets}' \ WHERE AcctSessionId = '%{Acct-Session-Id}' \ AND UserName = '%{User-Name}';" --- cut --- but it doesn't work, AcctSesssionTime in DB stays at 0 - though the remainder works still fine and logs to MySQL.. Any hints? Michael

3 7

Run time variable in sql
by rob-ml＠mailbox.org 27 Mar '18

27 Mar '18

Hey list, after problems in an older version I changed to the newest one (3.0.16). Now the attributes are processed but not delivered correctly. I want to process %{Actual-Data-Rate-Downstream} and set it as attribute Huawei-Output-Average-Rate. +-----------+----------------------------+----+------------------------------------------+ | groupname | attribute | op | value | +-----------+----------------------------+----+------------------------------------------+ | 50m | Huawei-Input-Average-Rate | = | `%{request:Actual-Data-Rate-Upstream}00` | | 50m | Huawei-Output-Average-Rate | = | `%{request:Actual-Data-Rate-Downstream}00` | +-----------+----------------------------+----+------------------------------------------+ Debug looks OK: Expand of attribute: (96) sql: EXPAND `%{request:Actual-Data-Rate-Upstream}00` (96) sql: --> `4199900` But it is allready 0: Result to the client/bras: (96) Huawei-Input-Average-Rate = 0 it sure is just a simpler one, but I can not find it, like a quote error or anything Best wishes Rob Sample Debug: (96) Received Access-Request Id 22 from <brasip>:1812 to radiusip:1812 length 362 (96) User-Name = "user123" (96) User-Password = "userpasschap" (96) NAS-Port = 3166215 (96) NAS-IP-Address = <brasip> (96) Service-Type = Framed-User (96) Framed-Protocol = PPP (96) Calling-Station-Id = "<cpemac>" (96) NAS-Identifier = "bras3" (96) NAS-Port-Type = Ethernet (96) NAS-Port-Id = "10.126.41.171/0.0.0.0 eth 2/7" (96) Acct-Session-Id = "bras30030342352307b37b9d003a40" (96) Connect-Info = "1000000000" (96) Huawei-Startup-Stamp = 1516351868 (96) Huawei-IPHost-Addr = "255.255.255.255 <cpemac>" (96) Huawei-Connect-ID = 14912 (96) Huawei-Version = "Huawei NE20E" (96) Huawei-Product-ID = "NE20E" (96) Huawei-Domain-Name = "example.com" (96) Huawei-User-Mac = "<cpemac>" (96) ADSL-Agent-Circuit-Id = 0x31302e3132362e34safasghasdasfasd2e302e302065746820322f37 (96) ADSL-Agent-Remote-Id = 0x4445552asdasfasdasd441472e414d525436 (96) Actual-Data-Rate-Upstream = 41999 (96) Actual-Data-Rate-Downstream = 109066 (96) Access-Loop-Encapsulation = 0x010000 (96) # Executing section authorize from file /usr/local/freeradius3/etc/raddb/sites-enabled/default (96) authorize { (96) policy filter_username { (96) if (&User-Name) { (96) if (&User-Name) -> TRUE (96) if (&User-Name) { (96) if (&User-Name =~ / /) { (96) if (&User-Name =~ / /) -> FALSE (96) if (&User-Name =~ /@[^@]*@/ ) { (96) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (96) if (&User-Name =~ /\.\./ ) { (96) if (&User-Name =~ /\.\./ ) -> FALSE (96) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (96) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (96) if (&User-Name =~ /\.$/) { (96) if (&User-Name =~ /\.$/) -> FALSE (96) if (&User-Name =~ /(a)\./) { (96) if (&User-Name =~ /(a)\./) -> FALSE (96) } # if (&User-Name) = notfound (96) } # policy filter_username = notfound (96) [preprocess] = ok (96) [chap] = noop (96) suffix: Checking for suffix after "@" (96) suffix: Looking up realm "example.com" for User-Name = "user123" (96) suffix: No such realm "example.com" (96) [suffix] = noop (96) sql: EXPAND %{User-Name} (96) sql: --> user123 (96) sql: SQL-User-Name set to 'user123' rlm_sql (sql): Reserved connection (113) (96) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (96) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'user123' ORDER BY id (96) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'user123' ORDER BY id (96) sql: User found in radcheck table (96) sql: Conditional check items matched, merging assignment check items (96) sql: Cleartext-Password := "userpasschap" (96) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (96) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'user123' ORDER BY id (96) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'user123' ORDER BY id (96) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (96) sql: --> SELECT groupname FROM radusergroup WHERE username = 'user123' ORDER BY priority (96) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'user123' ORDER BY priority (96) sql: User found in the group table (96) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id (96) sql: --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'dyn' ORDER BY id (96) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'dyn' ORDER BY id (96) sql: Group "dyn": Conditional check items matched (96) sql: Group "dyn": Merging assignment check items (96) sql: Pool-Name := "DIALPOOL-DYN-1" (96) sql: EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id (96) sql: --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'dyn' ORDER BY id (96) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'dyn' ORDER BY id (96) sql: Group "dyn": Merging reply items (96) sql: MS-Primary-DNS-Server = <primarydns> (96) sql: MS-Secondary-DNS-Server = <secondarydns> (96) sql: Session-Timeout := 86400 (96) sql: Fall-Through = Yes (96) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id (96) sql: --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '50m' ORDER BY id (96) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '50m' ORDER BY id (96) sql: Group "50m": Conditional check items matched (96) sql: Group "50m": Merging assignment check items (96) sql: EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id (96) sql: --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '50m' ORDER BY id (96) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '50m' ORDER BY id (96) sql: Group "50m": Merging reply items (96) sql: Huawei-Input-Average-Rate = "`%{request:Actual-Data-Rate-Upstream}00`" (96) sql: EXPAND `%{request:Actual-Data-Rate-Upstream}00` (96) sql: --> `4199900` rlm_sql (sql): Released connection (113) Need 1 more connections to reach min connections (3) rlm_sql (sql): Opening additional connection (114), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 (96) [sql] = ok (96) [expiration] = noop (96) [logintime] = noop (96) [pap] = updated (96) } # authorize = updated (96) Found Auth-Type = PAP (96) # Executing group from file /usr/local/freeradius3/etc/raddb/sites-enabled/default (96) Auth-Type PAP { (96) pap: Login attempt with password (96) pap: Comparing with "known good" Cleartext-Password (96) pap: User authenticated successfully (96) [pap] = ok (96) } # Auth-Type PAP = ok (96) # Executing section post-auth from file /usr/local/freeradius3/etc/raddb/sites-enabled/default (96) post-auth { (96) update { (96) No attributes updated (96) } # update = noop rlm_sql (sql): Reserved connection (112) (96) sql: EXPAND .query (96) sql: --> .query (96) sql: Using query template 'query' rlm_sql (sql): Reserved connection (113) (96) sql: EXPAND %{User-Name} (96) sql: --> user123 (96) sql: SQL-User-Name set to 'user123' (96) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (96) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'user123', 'userpass', 'Access-Accept', '2018-03-23 15:25:35') (96) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'user123', 'userpass', 'Access-Accept', '2018-03-23 15:25:35') (96) sql: SQL query returned: success (96) sql: 1 record(s) updated rlm_sql (sql): Released connection (113) (96) [sql] = ok (96) [exec] = noop (96) policy remove_reply_message_if_eap { (96) if (&reply:EAP-Message && &reply:Reply-Message) { (96) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (96) else { (96) [noop] = noop (96) } # else = noop (96) } # policy remove_reply_message_if_eap = noop (96) } # post-auth = ok (96) Sent Access-Accept Id 22 from <radiusip>:1812 to <brasip>:1812 length 0 (96) MS-Primary-DNS-Server = <primarydns> (96) MS-Secondary-DNS-Server = <secondarydns> (96) Session-Timeout = 86400 (96) Huawei-Input-Average-Rate = 0 (96) Framed-IP-Address = <usercpeip> (96) Finished request Waking up in 4.9 seconds.

4 12

Re: Is it possible to change a session's or account's lifetime
by 张强 27 Mar '18

27 Mar '18

Hi Alan, thanks for your reply. A captive portal is excatly what I'm trying to make, but our scenario is rather complicated. The user have to be taken from the portal to a mobile application to continue the authentication process which will need Internet access. That's why I need to temporarily allow the user's access. If I understood you right, I have to make the user to re-authenticate to let the NAS know the Expiration attribute has changed? If so, I think configuring the NAS to authenticate with freeRADIUS every 10 minutes, and making the initial expiration value to a little longer than 10 min will solve the problem. Am I right? And I'm terribly sorry if this post doesn't follow the thread I started previously, I don't know how to follow a thread when replying to a mailing list.

2 1