December 2019 - Freeradius-Users - lists.freeradius.org

router, freeradius, freeipa
by Robert 20 Dec '19

20 Dec '19

Hi, I have a feeling I'm really close to getting this to work. Spent a lot of time reading old posts and such. If I don't use mschap it works (first try). If I use mschap it doesn't (Second try). Fedora 31 server. [root@ldap raddb]# rpm -qi freeradius Name : freeradius Version : 3.0.20 Release : 1.fc31 Architecture: x86_64 Install Date: Thu 19 Dec 2019 02:50:05 PM EST [root@ldap raddb]# rpm -qi freeipa-server Name : freeipa-server Version : 4.8.3 Release : 1.fc31 Architecture: x86_64 Install Date: Thu 19 Dec 2019 01:36:44 AM EST [root@ldap ~]# radtest wifiuser testing1234 ldap.n-voice.com 1812 testing123 Sent Access-Request Id 163 from 0.0.0.0:40406 to 192.168.2.22:1812 length 78 User-Name = "wifiuser" User-Password = "testing1234" NAS-IP-Address = 192.168.2.22 NAS-Port = 1812 Message-Authenticator = 0x00 Cleartext-Password = "testing1234" Received Access-Accept Id 163 from 192.168.2.22:1812 to 192.168.2.22:40406 length 20 [root@ldap ~]# radtest -t mschap wifiuser testing1234 ldap.n-voice.com 1812 testing123 Sent Access-Request Id 109 from 0.0.0.0:48868 to 192.168.2.22:1812 length 134 User-Name = "wifiuser" MS-CHAP-Password = "testing1234" NAS-IP-Address = 192.168.2.22 NAS-Port = 1812 Message-Authenticator = 0x00 Cleartext-Password = "testing1234" MS-CHAP-Challenge = 0xd1561e8a052a4ff6 MS-CHAP-Response = 0x00010000000000000000000000000000000000000000000000009a3c3b9778a207ed4 64ba7a33a14629b299382f9a534b726 Received Access-Reject Id 109 from 192.168.2.22:1812 to 192.168.2.22:48868 length 20 (0) -: Expected Access-Accept got Access-Reject [root@ldap ~]# [root@ldap raddb]# radiusd -X FreeRADIUS Version 3.0.20 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/ldap including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/detail.log including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/rfc7542 including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/control including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> shortname = "auth2" nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client private-network-1 { ipaddr = 192.168.2.0/24 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = LDAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods- enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods- enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods- enabled/dynamic_clients # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/raddb/mods- enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key -- domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User- Password}" shell_escape = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods- enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods- enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods- enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods- enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods- config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods- config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/raddb/mods-enabled/ldap ldap { server = "localhost" identity = "cn=Directory Manager" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "cn=users,cn=accounts,dc=n-voice,dc=com" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods- enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:- unknown}" } # Loading module "sradutmp" from file /etc/raddb/mods- enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP- Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods- enabled/expiration # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods- enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods- enabled/replicate # Loading module "auth_log" from file /etc/raddb/mods- enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP- Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods- enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP- Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods- enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP- Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods- enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP- Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } instantiate { } # Instantiating module "cache_eap" from file /etc/raddb/mods- enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "reject" from file /etc/raddb/mods- enabled/always # Instantiating module "fail" from file /etc/raddb/mods- enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods- enabled/always # Instantiating module "invalid" from file /etc/raddb/mods- enabled/always # Instantiating module "userlock" from file /etc/raddb/mods- enabled/always # Instantiating module "notfound" from file /etc/raddb/mods- enabled/always # Instantiating module "noop" from file /etc/raddb/mods- enabled/always # Instantiating module "updated" from file /etc/raddb/mods- enabled/always # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "logintime" from file /etc/raddb/mods- enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods- enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "PROFILE=SYSTEM" cipher_server_preference = no ecdh_curve = "prime256v1" disable_tlsv1 = yes disable_tlsv1_1 = yes tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } Please use tls_min_version and tls_max_version instead of disable_tlsv1 Please use tls_min_version and tls_max_version instead of disable_tlsv1_2 # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "etc_passwd" from file /etc/raddb/mods- enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "IPASS" from file /etc/raddb/mods- enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods- enabled/realm # Instantiating module "bangpath" from file /etc/raddb/mods- enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods- enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods- enabled/realm # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods- config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods- config/attr_filter/accounting_response # Instantiating module "files" from file /etc/raddb/mods- enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20447 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "linelog" from file /etc/raddb/mods- enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods- enabled/linelog # Instantiating module "detail" from file /etc/raddb/mods- enabled/detail # Instantiating module "expiration" from file /etc/raddb/mods- enabled/expiration # Instantiating module "preprocess" from file /etc/raddb/mods- enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "auth_log" from file /etc/raddb/mods- enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods- enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods- enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods- enabled/detail.log } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Ignoring "sql" (see raddb/mods-available/README.rst) } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:336 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner- tunnel Listening on proxy address * port 51206 Listening on proxy address :: port 43983 Ready to process requests (0) Received Access-Request Id 163 from 192.168.2.22:40406 to 192.168.2.22:1812 length 78 (0) User-Name = "wifiuser" (0) User-Password = "testing1234" (0) NAS-IP-Address = 192.168.2.22 (0) NAS-Port = 1812 (0) Message-Authenticator = 0x209a8f3a29c9e325e76f8f9883568b49 (0) # Executing section authorize from file /etc/raddb/sites- enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "wifiuser", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop rlm_ldap (ldap): Reserved connection (0) (0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (0) ldap: --> (uid=wifiuser) (0) ldap: Performing search in "cn=users,cn=accounts,dc=n-voice,dc=com" with filter "(uid=wifiuser)", scope "sub" (0) ldap: Waiting for search result... (0) ldap: User object found at DN "uid=wifiuser,cn=users,cn=accounts,dc=n-voice,dc=com" (0) ldap: Processing user attributes (0) ldap: control:Password-With-Header += '{PBKDF2_SHA256}AAAIAEhOrJwqZkQ2Xq6WP4lVdbpoUu6uUvswCNAcoxTx1yHPt79yzSK ZC1pPccla4Pmnkcj1HPeKF6zuWC0srkIND9fiJuG6Q3Npsd8la6B6smIqgt4mI0WhYtY2Us dGd2uloy15ST+tK+WO4pZfOJbZ4zI82qbd3zgzeD1QSnT/F0oxLZ4yUcr6aYbSi1/I4KCYP 6tJFb9Cnq8eXXbdp6JCpNw1VCn+a9TYrjCPkP+kwglCX28Ovq9zt8VX5K/19PysnChU9vaX ZWwbfiTk0rbissyoBcYIzruO73f18zsyWUYiXHpq0GyybK0d8X4ddC5DxRTDilzZ3GuCBUm uFNaviktPV66jfoMclpPI1LFRZJjND5T6/xSTTKIyO7GDrERM2HdX1oVElLKzdBCbu0IfhS kHw6dcYaJ2cx5DQM/tdv5u' rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (0) [ldap] = updated (0) [expiration] = noop (0) [logintime] = noop (0) pap: Unknown header {PBKDF2_SHA256} in Password-With-Header, re- writing to Cleartext-Password (0) pap: Removing &control:Password-With-Header (0) [pap] = updated (0) if (User-Password) { (0) if (User-Password) -> TRUE (0) if (User-Password) { (0) update control { (0) Auth-Type := LDAP (0) } # update control = noop (0) } # if (User-Password) = noop (0) } # authorize = updated (0) Found Auth-Type = LDAP (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Auth-Type LDAP { rlm_ldap (ldap): Reserved connection (1) (0) ldap: Login attempt by "wifiuser" (0) ldap: Using user DN from request "uid=wifiuser,cn=users,cn=accounts,dc=n-voice,dc=com" (0) ldap: Waiting for bind result... (0) ldap: Bind successful (0) ldap: Bind as user "uid=wifiuser,cn=users,cn=accounts,dc=n- voice,dc=com" was successful rlm_ldap (ldap): Released connection (1) (0) [ldap] = ok (0) } # Auth-Type LDAP = ok (0) # Executing section post-auth from file /etc/raddb/sites- enabled/default (0) post-auth { (0) if (session-state:User-Name && reply:User-Name && request:User- Name && (reply:User-Name == request:User-Name)) { (0) if (session-state:User-Name && reply:User-Name && request:User- Name && (reply:User-Name == request:User-Name)) -> FALSE (0) update { (0) No attributes updated for RHS &session-state: (0) } # update = noop (0) ldap: EXPAND . (0) ldap: --> . (0) ldap: EXPAND Authenticated at %S (0) ldap: --> Authenticated at 2019-12-19 19:24:44 rlm_ldap (ldap): Reserved connection (2) (0) ldap: Using user DN from request "uid=wifiuser,cn=users,cn=accounts,dc=n-voice,dc=com" (0) ldap: Modifying object with DN "uid=wifiuser,cn=users,cn=accounts,dc=n-voice,dc=com" (0) ldap: Waiting for modify result... rlm_ldap (ldap): Released connection (2) (0) [ldap] = ok (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # post-auth = ok (0) Sent Access-Accept Id 163 from 192.168.2.22:1812 to 192.168.2.22:40406 length 0 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 109 from 192.168.2.22:48868 to 192.168.2.22:1812 length 134 (1) User-Name = "wifiuser" (1) NAS-IP-Address = 192.168.2.22 (1) NAS-Port = 1812 (1) Message-Authenticator = 0xdb1fd8ed25ede2827388f5af6d9302c3 (1) MS-CHAP-Challenge = 0xd1561e8a052a4ff6 (1) MS-CHAP-Response = 0x00010000000000000000000000000000000000000000000000009a3c3b9778a207ed4 64ba7a33a14629b299382f9a534b726 (1) # Executing section authorize from file /etc/raddb/sites- enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap' (1) [mschap] = ok (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "wifiuser", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: No EAP-Message, not doing EAP (1) [eap] = noop (1) [files] = noop rlm_ldap (ldap): Reserved connection (3) (1) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (1) ldap: --> (uid=wifiuser) (1) ldap: Performing search in "cn=users,cn=accounts,dc=n-voice,dc=com" with filter "(uid=wifiuser)", scope "sub" (1) ldap: Waiting for search result... (1) ldap: User object found at DN "uid=wifiuser,cn=users,cn=accounts,dc=n-voice,dc=com" (1) ldap: Processing user attributes (1) ldap: control:Password-With-Header += '{PBKDF2_SHA256}AAAIAEhOrJwqZkQ2Xq6WP4lVdbpoUu6uUvswCNAcoxTx1yHPt79yzSK ZC1pPccla4Pmnkcj1HPeKF6zuWC0srkIND9fiJuG6Q3Npsd8la6B6smIqgt4mI0WhYtY2Us dGd2uloy15ST+tK+WO4pZfOJbZ4zI82qbd3zgzeD1QSnT/F0oxLZ4yUcr6aYbSi1/I4KCYP 6tJFb9Cnq8eXXbdp6JCpNw1VCn+a9TYrjCPkP+kwglCX28Ovq9zt8VX5K/19PysnChU9vaX ZWwbfiTk0rbissyoBcYIzruO73f18zsyWUYiXHpq0GyybK0d8X4ddC5DxRTDilzZ3GuCBUm uFNaviktPV66jfoMclpPI1LFRZJjND5T6/xSTTKIyO7GDrERM2HdX1oVElLKzdBCbu0IfhS kHw6dcYaJ2cx5DQM/tdv5u' rlm_ldap (ldap): Released connection (3) Need 4 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) [ldap] = updated (1) [expiration] = noop (1) [logintime] = noop (1) pap: Unknown header {PBKDF2_SHA256} in Password-With-Header, re- writing to Cleartext-Password (1) pap: Removing &control:Password-With-Header (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) if (User-Password) { (1) if (User-Password) -> FALSE (1) } # authorize = updated (1) Found Auth-Type = mschap (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) mschap: Found Cleartext-Password, hashing to create NT-Password (1) mschap: ERROR: Failed generating NT-Password (1) [mschap] = fail (1) } # authenticate = fail (1) Failed to authenticate the user (1) Using Post-Auth-Type Reject (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Post-Auth-Type REJECT { (1) attr_filter.access_reject: EXPAND %{User-Name} (1) attr_filter.access_reject: --> wifiuser (1) attr_filter.access_reject: Matched entry DEFAULT at line 11 (1) [attr_filter.access_reject] = updated (1) [eap] = noop (1) policy remove_reply_message_if_eap { (1) if (&reply:EAP-Message && &reply:Reply-Message) { (1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (1) else { (1) [noop] = noop (1) } # else = noop (1) } # policy remove_reply_message_if_eap = noop (1) } # Post-Auth-Type REJECT = updated (1) Delaying response for 1.000000 seconds Waking up in 0.2 seconds. Waking up in 0.7 seconds. (1) Sending delayed response (1) Sent Access-Reject Id 109 from 192.168.2.22:1812 to 192.168.2.22:48868 length 20 Waking up in 1.6 seconds. (0) Cleaning up request packet ID 163 with timestamp +5 Waking up in 2.3 seconds. Please let me know if I can provide anything else that would be useful. If there is a guide on how to get dd_wrt, freeradius and freeipa working I'd like to see that. I've read a bunch of them so far. This is the closest I can get. python3-samba-4.11.3-0.fc31.x86_64 Thu 19 Dec 2019 05:50:53 PM EST python3-libsss_nss_idmap-2.2.2-3.fc31.x86_64 Thu 19 Dec 2019 05:50:53 PM EST freeipa-server-trust-ad-4.8.3-1.fc31.x86_64 Thu 19 Dec 2019 05:50:53 PM EST python3-tevent-0.10.1-1.fc31.x86_64 Thu 19 Dec 2019 05:50:52 PM EST python3-tdb-1.4.2-1.fc31.x86_64 Thu 19 Dec 2019 05:50:52 PM EST python3-talloc-2.3.0-1.fc31.x86_64 Thu 19 Dec 2019 05:50:52 PM EST python3-ldb-2.0.7-1.fc31.x86_64 Thu 19 Dec 2019 05:50:52 PM EST libtevent-devel-0.10.1-1.fc31.x86_64 Thu 19 Dec 2019 05:50:52 PM EST libtdb-devel-1.4.2-1.fc31.x86_64 Thu 19 Dec 2019 05:50:52 PM EST libtalloc-devel-2.3.0-1.fc31.x86_64 Thu 19 Dec 2019 05:50:52 PM EST libldb-devel-2.0.7-1.fc31.x86_64 Thu 19 Dec 2019 05:50:52 PM EST samba-4.11.3-0.fc31.x86_64 Thu 19 Dec 2019 04:34:11 PM EST freeradius-utils-3.0.20-1.fc31.x86_64 Thu 19 Dec 2019 02:50:05 PM EST freeradius-ldap-3.0.20-1.fc31.x86_64 Thu 19 Dec 2019 02:50:05 PM EST freeradius-3.0.20-1.fc31.x86_64 Thu 19 Dec 2019 02:50:05 PM EST perl-Math-Complex-1.59-449.fc31.noarch Thu 19 Dec 2019 02:50:02 PM EST perl-Math-BigInt-1.9998.16-439.fc31.noarch Thu 19 Dec 2019 02:50:02 PM EST perl-DBI-1.642-5.fc31.x86_64 Thu 19 Dec 2019 02:50:02 PM EST make-4.2.1-15.fc31.x86_64 Thu 19 Dec 2019 02:50:02 PM EST libyubikey-1.13-12.fc31.x86_64 Thu 19 Dec 2019 02:50:02 PM EST guile22-2.2.6-2.fc31.x86_64 Thu 19 Dec 2019 02:50:01 PM EST ykclient-2.15-9.fc31.x86_64 Thu 19 Dec 2019 02:49:59 PM EST perl-Time-HiRes-1.9760-439.fc31.x86_64 Thu 19 Dec 2019 02:49:59 PM EST libatomic_ops-7.6.10-2.fc31.x86_64 Thu 19 Dec 2019 02:49:59 PM EST gc-7.6.4-6.fc31.x86_64 Thu 19 Dec 2019 02:49:59 PM EST freeipa-server-dns-4.8.3-1.fc31.noarch Thu 19 Dec 2019 01:57:57 PM EST opendnssec-1.4.14-5.fc31.x86_64 Thu 19 Dec 2019 01:57:56 PM EST opencryptoki-libs-3.11.0-4.fc31.x86_64 Thu 19 Dec 2019 01:57:55 PM EST opencryptoki-icsftok-3.11.0-4.fc31.x86_64 Thu 19 Dec 2019 01:57:55 PM EST opencryptoki-3.11.0-4.fc31.x86_64 Thu 19 Dec 2019 01:57:55 PM EST ldns-1.7.0-26.fc31.x86_64 Thu 19 Dec 2019 01:57:55 PM EST libitm-9.2.1-1.fc31.x86_64 Thu 19 Dec 2019 01:57:54 PM EST bind-dyndb-ldap-11.2-2.fc31.x86_64 Thu 19 Dec 2019 01:36:45 AM EST freeipa-server-4.8.3-1.fc31.x86_64 Thu 19 Dec 2019 01:36:44 AM EST Thanks, Rob

2 1

Control List Attribute in Post-Auth for Dynamic VLAN assignment logic
by S. 20 Dec '19

20 Dec '19

Hi all, I'm stuck on an issue with FreeRADIUS configuration and after a few days of reading and searching I'm out of ideas. Hopefully it's just a simple mistake which someone can pick up and help me out with. I've been using FreeRADIUS to handle EAP authentication (both EAP-TLS and EAP-PEAP-MSCHAPv2) and dynamic VLAN assignments for wireless networks and it's been working flawlessly. Recently I've had to look at making some configuration changes to suit a more complex situation and this is where I'm getting stuck and going around in circles. Previously I have been defining the dynamic VLAN on a per-user basis within the "users" configuration file as such: testuser NT-Password := "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX" Tunnel-Type = 13, Tunnel-Medium-Type = 6, Tunnel-Private-Group-Id = "125" # CLIENT-VPN This has been working fine and the dynamic VLAN gets assigned as expected. I need to change this now so that the "users" file only contains the username and password hash and the dynamic VLAN assignment actually happens using unlang logic in the post-auth section of the "/etc/freeradius/3.0/sites-enabled/default" file. After a bit of reading, it appears that I can create an attribute in the users file which get's added into a control list which I can reference in the post-auth phase. So I try doing that by first defining the attribute in the "dictionary" file: #tail -n 2 /etc/freeradius/3.0/dictionary ATTRIBUTE VLAN-Name 3000 string And then I add the attribute (and the desired value) in the users file: testuser NT-Password := "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX", VLAN-Name := "CLIENT-VPN" I then create the relevant unlang logic. What I'm trying to do with this logic is determine the NAS-IP (WAP) and assigned VLAN-Name for the user. Based on this, I'll send back the approrpiate VLAN-ID. # cat /etc/freeradius/3.0/sites-enabled/default ... post-auth { debug_all ... if ((&request:NAS-IP-Address == 192.168.40.21) && (&control:VLAN-Name == "CLIENT-VPN")) { update reply { &Tunnel-Type := VLAN &Tunnel-Medium-Type := IEEE-802 &Tunnel-Private-Group-Id := "225" } } The unlang logic works fine just against the NAS-IP-Address however fails when used with the VLAN-Name custom attribute. Looking through the debugs, I find two areas indicating a problem. The most obvious is the ERROR below indicating a failure to get my attribute: (10) &reply::User-Name += &session-state:User-Name[*] -> 'testuser' (10) } # update = noop (10) if ((&request:NAS-IP-Address == 192.168.40.21) && (&control:VLAN-Name == "CLIENT-VPN")) { (10) ERROR: Failed retrieving values required to evaluate condition (10) [exec] = noop (10) policy remove_reply_message_if_eap { (10) if (&reply:EAP-Message && &reply:Reply-Message) { (10) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (10) else { (10) [noop] = noop (10) } # else = noop (10) } # policy remove_reply_message_if_eap = noop (10) } # post-auth = noop Enabling the "debug_all" option in the post-auth section (to dump all attributes) also reveals that my control list attribute "&control:VLAN-Name" doesn't appear to be available for use. The only control list attribute is "&control:Auth-Type". (10) eap: Freeing handler (10) [eap] = ok (10) } # authenticate = ok (10) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (10) post-auth { (10) policy debug_all { (10) policy debug_control { (10) if ("%{debug_attr:control:}" == '') { (10) Attributes matching "control:" (10) &control:Auth-Type = eap (10) EXPAND %{debug_attr:control:} (10) --> (10) if ("%{debug_attr:control:}" == '') -> TRUE (10) if ("%{debug_attr:control:}" == '') { (10) [noop] = noop (10) } # if ("%{debug_attr:control:}" == '') = noop (10) } # policy debug_control = noop (10) policy debug_request { (10) if ("%{debug_attr:request:}" == '') { Appreciate any help you can provide. Thank you. P.S. I've included the full debug output here as requested in the mailing list rules/FAQ: freeradius -X FreeRADIUS Version 3.0.12 Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/passwd including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/eap including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client GC-WLAN-UAP1 { ipaddr = 192.168.8.21 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client BNE-WLAN-UAP1 { ipaddr = 192.168.40.21 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } instantiate { } # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/XXXXXX.key.pem" certificate_file = "/etc/ssl/certs/XXXXXX.cert.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "HIGH" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 53109 Listening on proxy address :: port 50014 Ready to process requests (0) Received Access-Request Id 196 from 192.168.40.21:46541 to 192.168.8.35:1812 length 163 (0) User-Name = "anonymous" (0) NAS-Identifier = "802aa8d3d475" (0) NAS-Port = 0 (0) Called-Station-Id = "82-2A-A8-D5-D4-75:WLAN" (0) Calling-Station-Id = "EC-1F-72-7E-BC-BB" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) EAP-Message = 0x0295000e01616e6f6e796d6f7573 (0) Message-Authenticator = 0x39e811b49e0603269b2b13734db8c4d3 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 149 length 14 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_peap to process data (0) eap_peap: Initiating new EAP-TLS session (0) eap_peap: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 150 length 6 (0) eap: EAP session adding &reply:State = 0xdcff01a1dc691842 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Sent Access-Challenge Id 196 from 192.168.8.35:1812 to 192.168.40.21:46541 length 0 (0) EAP-Message = 0x019600061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xdcff01a1dc6918422343d3b59bbb1704 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 197 from 192.168.40.21:46541 to 192.168.8.35:1812 length 320 (1) User-Name = "anonymous" (1) NAS-Identifier = "802aa8d3d475" (1) NAS-Port = 0 (1) Called-Station-Id = "82-2A-A8-D5-D4-75:WLAN" (1) Calling-Station-Id = "EC-1F-72-7E-BC-BB" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) EAP-Message = 0x0296009919800000008f160301008a010000860303ec979b7b6f81e04f09f5d9b8d7ed3378828f001f372eb2fbf8b912717f1d834500002acca9cca8c02bc02fc02cc030c009c023c013c027c00ac024c014c028009c009d002f003c0035003d000a01000033ff0100010000170000000d001400120403 (1) State = 0xdcff01a1dc6918422343d3b59bbb1704 (1) Message-Authenticator = 0x76ea1adde71a5cdad501da5ad77f89a2 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 150 length 153 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xdcff01a1dc691842 (1) eap: Finished EAP session with state 0xdcff01a1dc691842 (1) eap: Previous EAP request found for state 0xdcff01a1dc691842, released from the list (1) eap: Peer sent packet with method EAP PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Continuing EAP-TLS (1) eap_peap: Peer indicated complete TLS record size will be 143 bytes (1) eap_peap: Got complete TLS record (143 bytes) (1) eap_peap: [eaptls verify] = length included (1) eap_peap: (other): before SSL initialization (1) eap_peap: TLS_accept: before SSL initialization (1) eap_peap: TLS_accept: before SSL initialization (1) eap_peap: <<< recv TLS 1.2 [length 008a] (1) eap_peap: TLS_accept: SSLv3/TLS read client hello (1) eap_peap: >>> send TLS 1.2 [length 003d] (1) eap_peap: TLS_accept: SSLv3/TLS write server hello (1) eap_peap: >>> send TLS 1.2 [length 0c06] (1) eap_peap: TLS_accept: SSLv3/TLS write certificate (1) eap_peap: >>> send TLS 1.2 [length 024d] (1) eap_peap: TLS_accept: SSLv3/TLS write key exchange (1) eap_peap: >>> send TLS 1.2 [length 0004] (1) eap_peap: TLS_accept: SSLv3/TLS write server done (1) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (1) eap_peap: In SSL Handshake Phase (1) eap_peap: In SSL Accept mode (1) eap_peap: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 151 length 1014 (1) eap: EAP session adding &reply:State = 0xdcff01a1dd681842 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Sent Access-Challenge Id 197 from 192.168.8.35:1812 to 192.168.40.21:46541 length 0 (1) EAP-Message = 0x019703f619c000000ea8160303003d020000390303cb0dbbaebc37affb9ea861ad9cdd5229b60032c5c5e051bca74530ed8fa78d2e00cca8000011ff01000100000b000403000102001700001603030c060b000c02000bff00065f3082065b30820443a0030201020202100b300d06092a864886f70d01 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xdcff01a1dd6818422343d3b59bbb1704 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 198 from 192.168.40.21:46541 to 192.168.8.35:1812 length 173 (2) User-Name = "anonymous" (2) NAS-Identifier = "802aa8d3d475" (2) NAS-Port = 0 (2) Called-Station-Id = "82-2A-A8-D5-D4-75:WLAN" (2) Calling-Station-Id = "EC-1F-72-7E-BC-BB" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) EAP-Message = 0x029700061900 (2) State = 0xdcff01a1dd6818422343d3b59bbb1704 (2) Message-Authenticator = 0xe6bd97dd94d0e74610db361cdabe26f1 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 151 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xdcff01a1dd681842 (2) eap: Finished EAP session with state 0xdcff01a1dd681842 (2) eap: Previous EAP request found for state 0xdcff01a1dd681842, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer ACKed our handshake fragment (2) eap_peap: [eaptls verify] = request (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 152 length 1010 (2) eap: EAP session adding &reply:State = 0xdcff01a1de671842 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Sent Access-Challenge Id 198 from 192.168.8.35:1812 to 192.168.40.21:46541 length 0 (2) EAP-Message = 0x019803f2194081890603551d23048181307f8014f5a4fe043082531ea9c9e8894ce371c0d8b76e0ca15ca45a3058310b30090603550406130241553113301106035504080c0a517565656e736c616e6431153013060355040a0c0c4950414e59414e59204c7464311d301b06035504030c144950414e59 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xdcff01a1de6718422343d3b59bbb1704 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 199 from 192.168.40.21:46541 to 192.168.8.35:1812 length 173 (3) User-Name = "anonymous" (3) NAS-Identifier = "802aa8d3d475" (3) NAS-Port = 0 (3) Called-Station-Id = "82-2A-A8-D5-D4-75:WLAN" (3) Calling-Station-Id = "EC-1F-72-7E-BC-BB" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) EAP-Message = 0x029800061900 (3) State = 0xdcff01a1de6718422343d3b59bbb1704 (3) Message-Authenticator = 0xd4e4a6306a82241636efbaedeb77614e (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 152 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xdcff01a1de671842 (3) eap: Finished EAP session with state 0xdcff01a1de671842 (3) eap: Previous EAP request found for state 0xdcff01a1de671842, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 153 length 1010 (3) eap: EAP session adding &reply:State = 0xdcff01a1df661842 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Sent Access-Challenge Id 199 from 192.168.8.35:1812 to 192.168.40.21:46541 length 0 (3) EAP-Message = 0x019903f219403db777b2ab1db344d5c78cff8c6741f67e95299b96815e5bcb66eb71439eb8a99050aa381ef4d9d7cc65154cbd3dcdc50a20d6f4da6c3eedc4a6c4c4adb072c4d5d71a4e6ed7456e5e0c9f73de1367f00dbd34e027282672811a6dd2aecdebd2cb615ccddf147d02b1c65fde6b28ea22f7 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xdcff01a1df6618422343d3b59bbb1704 (3) Finished request Waking up in 4.8 seconds. (4) Received Access-Request Id 200 from 192.168.40.21:46541 to 192.168.8.35:1812 length 173 (4) User-Name = "anonymous" (4) NAS-Identifier = "802aa8d3d475" (4) NAS-Port = 0 (4) Called-Station-Id = "82-2A-A8-D5-D4-75:WLAN" (4) Calling-Station-Id = "EC-1F-72-7E-BC-BB" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) EAP-Message = 0x029900061900 (4) State = 0xdcff01a1df6618422343d3b59bbb1704 (4) Message-Authenticator = 0x4a07d878ea0ab40860bd41840d9b53d1 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 153 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xdcff01a1df661842 (4) eap: Finished EAP session with state 0xdcff01a1df661842 (4) eap: Previous EAP request found for state 0xdcff01a1df661842, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 154 length 746 (4) eap: EAP session adding &reply:State = 0xdcff01a1d8651842 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Sent Access-Challenge Id 200 from 192.168.8.35:1812 to 192.168.40.21:46541 length 0 (4) EAP-Message = 0x019a02ea19008fba9616587fb1ea32ee83f2f0972c1cde589ebb9e94a1deba7339756e56e802e9439eb0c62667a97b0b7771ab622fe5422684d07d5f276180e361a9ab2cb3db23c2705d0c12b7d25b66bcacdff1c531817bd650abe21e1ef3df65ca76f81e5cf091d43d31f95c97e8dcaf3269fbc18cfe (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xdcff01a1d86518422343d3b59bbb1704 (4) Finished request Waking up in 4.8 seconds. (5) Received Access-Request Id 201 from 192.168.40.21:46541 to 192.168.8.35:1812 length 295 (5) User-Name = "anonymous" (5) NAS-Identifier = "802aa8d3d475" (5) NAS-Port = 0 (5) Called-Station-Id = "82-2A-A8-D5-D4-75:WLAN" (5) Calling-Station-Id = "EC-1F-72-7E-BC-BB" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) EAP-Message = 0x029a0080198000000076160303004610000042410489c8bd0afbba1b5226f36bba36403153a0adc35a301aad07d58b9688b3371475eacc1ad36aa2fa043d225c347d21f1d8d8581073ea0db0c403ad488a53a8f85d140303000101160303002005961f8818b3e5348683646f8a541de9ea5073ce2efa66 (5) State = 0xdcff01a1d86518422343d3b59bbb1704 (5) Message-Authenticator = 0x3311ca3d5bfb4e1796cc1d6c70cb725c (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 154 length 128 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xdcff01a1d8651842 (5) eap: Finished EAP session with state 0xdcff01a1d8651842 (5) eap: Previous EAP request found for state 0xdcff01a1d8651842, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 118 bytes (5) eap_peap: Got complete TLS record (118 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: TLS_accept: SSLv3/TLS write server done (5) eap_peap: <<< recv TLS 1.2 [length 0046] (5) eap_peap: TLS_accept: SSLv3/TLS read client key exchange (5) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec (5) eap_peap: <<< recv TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: SSLv3/TLS read finished (5) eap_peap: >>> send TLS 1.2 [length 0001] (5) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec (5) eap_peap: >>> send TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: SSLv3/TLS write finished (5) eap_peap: (other): SSL negotiation finished successfully (5) eap_peap: SSL Connection Established (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 155 length 49 (5) eap: EAP session adding &reply:State = 0xdcff01a1d9641842 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Sent Access-Challenge Id 201 from 192.168.8.35:1812 to 192.168.40.21:46541 length 0 (5) EAP-Message = 0x019b003119001403030001011603030020928339ca9a02fb4881ae249f612df4a26df59326e0672ac8e445c34168991d32 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xdcff01a1d96418422343d3b59bbb1704 (5) Finished request Waking up in 4.7 seconds. (6) Received Access-Request Id 202 from 192.168.40.21:46541 to 192.168.8.35:1812 length 173 (6) User-Name = "anonymous" (6) NAS-Identifier = "802aa8d3d475" (6) NAS-Port = 0 (6) Called-Station-Id = "82-2A-A8-D5-D4-75:WLAN" (6) Calling-Station-Id = "EC-1F-72-7E-BC-BB" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Connect-Info = "CONNECT 0Mbps 802.11b" (6) EAP-Message = 0x029b00061900 (6) State = 0xdcff01a1d96418422343d3b59bbb1704 (6) Message-Authenticator = 0xf6be5cee51e32fdacbbef344781223d3 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 155 length 6 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xdcff01a1d9641842 (6) eap: Finished EAP session with state 0xdcff01a1d9641842 (6) eap: Previous EAP request found for state 0xdcff01a1d9641842, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer ACKed our handshake fragment. handshake is finished (6) eap_peap: [eaptls verify] = success (6) eap_peap: [eaptls process] = success (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state TUNNEL ESTABLISHED (6) eap: Sending EAP Request (code 1) ID 156 length 32 (6) eap: EAP session adding &reply:State = 0xdcff01a1da631842 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Sent Access-Challenge Id 202 from 192.168.8.35:1812 to 192.168.40.21:46541 length 0 (6) EAP-Message = 0x019c00201900170303001599b5f4133e2b7766900ad78dd36daf40d396f375f2 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xdcff01a1da6318422343d3b59bbb1704 (6) Finished request Waking up in 4.7 seconds. (7) Received Access-Request Id 203 from 192.168.40.21:46541 to 192.168.8.35:1812 length 203 (7) User-Name = "anonymous" (7) NAS-Identifier = "802aa8d3d475" (7) NAS-Port = 0 (7) Called-Station-Id = "82-2A-A8-D5-D4-75:WLAN" (7) Calling-Station-Id = "EC-1F-72-7E-BC-BB" (7) Framed-MTU = 1400 (7) NAS-Port-Type = Wireless-802.11 (7) Connect-Info = "CONNECT 0Mbps 802.11b" (7) EAP-Message = 0x029c002419001703030019dfbe3664b6ba25228ceeefd1544ec446fce8a53f317c6cdc30 (7) State = 0xdcff01a1da6318422343d3b59bbb1704 (7) Message-Authenticator = 0xe33ca0e8b373f089e411f537f6aa90b8 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 156 length 36 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xdcff01a1da631842 (7) eap: Finished EAP session with state 0xdcff01a1da631842 (7) eap: Previous EAP request found for state 0xdcff01a1da631842, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state WAITING FOR INNER IDENTITY (7) eap_peap: Identity - testuser (7) eap_peap: Got inner identity 'testuser' (7) eap_peap: Setting default EAP type for tunneled EAP session (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x029c000d017465737475736572 (7) eap_peap: Setting User-Name to testuser (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x029c000d017465737475736572 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "testuser" (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x029c000d017465737475736572 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "testuser" (7) server inner-tunnel { (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "testuser", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 156 length 13 (7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Peer sent packet with method EAP Identity (1) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: Issuing Challenge (7) eap: Sending EAP Request (code 1) ID 157 length 43 (7) eap: EAP session adding &reply:State = 0x73614bc173fc510e (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) EAP-Message = 0x019d002b1a019d002610e5e45786ca3a29b6956bd8375f1639c0667265657261646975732d332e302e3132 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x73614bc173fc510eb5bcf37c76b9f7ee (7) eap_peap: Got tunneled reply code 11 (7) eap_peap: EAP-Message = 0x019d002b1a019d002610e5e45786ca3a29b6956bd8375f1639c0667265657261646975732d332e302e3132 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x73614bc173fc510eb5bcf37c76b9f7ee (7) eap_peap: Got tunneled reply RADIUS code 11 (7) eap_peap: EAP-Message = 0x019d002b1a019d002610e5e45786ca3a29b6956bd8375f1639c0667265657261646975732d332e302e3132 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x73614bc173fc510eb5bcf37c76b9f7ee (7) eap_peap: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 157 length 66 (7) eap: EAP session adding &reply:State = 0xdcff01a1db621842 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Sent Access-Challenge Id 203 from 192.168.8.35:1812 to 192.168.40.21:46541 length 0 (7) EAP-Message = 0x019d004219001703030037dffc0f74fbf5c2a1c1b4e813f1bedcd02a226b0d28b1fcd482c11a0c445a5769fb76b4160a1592400e1e3132b40adfcd8487ab156e0774 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xdcff01a1db6218422343d3b59bbb1704 (7) Finished request Waking up in 4.6 seconds. (8) Received Access-Request Id 204 from 192.168.40.21:46541 to 192.168.8.35:1812 length 257 (8) User-Name = "anonymous" (8) NAS-Identifier = "802aa8d3d475" (8) NAS-Port = 0 (8) Called-Station-Id = "82-2A-A8-D5-D4-75:WLAN" (8) Calling-Station-Id = "EC-1F-72-7E-BC-BB" (8) Framed-MTU = 1400 (8) NAS-Port-Type = Wireless-802.11 (8) Connect-Info = "CONNECT 0Mbps 802.11b" (8) EAP-Message = 0x029d005a1900170303004fac11437186f600192f1d060baa8875d682df61ad47e0e246cf391949b2272efd532220d5f3bc4898f73b36d4b0bbd67f76b79d8085469c0d42c14266c541c8ac5832394b2a9c58d4c996d2c12052b5 (8) State = 0xdcff01a1db6218422343d3b59bbb1704 (8) Message-Authenticator = 0xae99edf0405ba34c80a232350a88654d (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 157 length 90 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x73614bc173fc510e (8) eap: Finished EAP session with state 0xdcff01a1db621842 (8) eap: Previous EAP request found for state 0xdcff01a1db621842, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x029d00431a029d003e316faa2fa72f071a07fc2fa07c14a760890000000000000000f12df86a0605ad36f6429ce8687a49633d5dde6fff3d7153007465737475736572 (8) eap_peap: Setting User-Name to testuser (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x029d00431a029d003e316faa2fa72f071a07fc2fa07c14a760890000000000000000f12df86a0605ad36f6429ce8687a49633d5dde6fff3d7153007465737475736572 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "testuser" (8) eap_peap: State = 0x73614bc173fc510eb5bcf37c76b9f7ee (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x029d00431a029d003e316faa2fa72f071a07fc2fa07c14a760890000000000000000f12df86a0605ad36f6429ce8687a49633d5dde6fff3d7153007465737475736572 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "testuser" (8) State = 0x73614bc173fc510eb5bcf37c76b9f7ee (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8)

1 3

freeradius -> AD performance
by Munroe Sollog 20 Dec '19

20 Dec '19

I would like to replace the windows NPS service with freeradius. Freeradius provides a lot better visibility and control than the Microsoft NPS service. However, doing some very rudimentary performance analysis and my freeradius server is ~4-5times slower than the Microsoft NPS service. My wireless controllers provide a "test your radius server" command and it outputs the response time. I am testing using a known bad username and password against both radius servers. According to the wireless controller the MS NPS returns a result in ~3ms, while Freeradius returns a response in ~1000ms. The NPS server I am benchmarking is in production and under load while the freeradius server I am testing is not. Below is the output of freeradius -X as well as an example query. If anyone sees anything that might explain the ~300% performance difference, I'd appreciate it. main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client aruba { ipaddr = 128.180.8.128/27 require_message_authenticator = no secret = <<< secret >>> proto = "*" limit { max_connections = 32 lifetime = 0 idle_timeout = 30 } } client newguy { ipaddr = 128.180.10.10 require_message_authenticator = no secret = <<< secret >>> proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = MS-CHAP # Creating Auth-Type = mschap radiusd: #### Instantiating modules #### modules { # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } instantiate { } # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = yes lifetime = 1 name = "tls-eap" max_entries = 255 persist_dir = "/var/lib/radiusd/tlscache" } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no identity = "ccc" } # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 86400 cleanup_interval = 300 idle_timeout = 600 retry_delay = 30 spread = no } rlm_mschap (mschap): Opening additional connection (0), 1 of 32 pending slots used rlm_mschap (mschap): Opening additional connection (1), 1 of 31 pending slots used rlm_mschap (mschap): Opening additional connection (2), 1 of 30 pending slots used rlm_mschap (mschap): Opening additional connection (3), 1 of 29 pending slots used rlm_mschap (mschap): Opening additional connection (4), 1 of 28 pending slots used rlm_mschap (mschap): authenticating directly to winbind # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:335 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 55646 Listening on proxy address :: port 47072 Ready to process requests (0) Received Access-Request Id 10 from 128.180.8.130:40170 to 128.180.1.12:1812 length 194 (0) NAS-IP-Address = 128.180.8.141 (0) NAS-Port = 0 (0) NAS-Port-Type = Wireless-802.11 (0) User-Name = "foo" (0) Service-Type = Login-User (0) Calling-Station-Id = "0.0.0.0" (0) Called-Station-Id = "204C03020CC0" (0) MS-CHAP-Challenge = 0x42f648660a47f2860d94aed796c52c71 (0) MS-CHAP2-Response = 0x0000244dd05ed5221fbe46804201d1c17d1a000000000000000078df6cecbf0927a520cf28c649448a9e28befa1886cb8cfb (0) Aruba-Location-Id = "N/A" (0) Aruba-AP-Group = "N/A" (0) Message-Authenticator = 0xfbc5275c0912b9aca881404e2bc4e43c (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap' (0) [mschap] = ok (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "foo", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [expiration] = noop (0) [logintime] = noop (0) } # authorize = ok (0) Found Auth-Type = mschap (0) Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Post-Auth-Type REJECT { (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> foo (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) [eap] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # Post-Auth-Type REJECT = updated (0) Login incorrect: [foo/<via Auth-Type = mschap>] (from client aruba port 0 cli 0.0.0.0) (0) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 10 from 128.180.1.12:1812 to 128.180.8.130:40170 length 20 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 10 with timestamp +13 Ready to process requests -- Munroe Sollog Senior Network Engineer munroe(a)lehigh.edu

2 2

Is there a best practice around credential storage?
by Coy Hile 20 Dec '19

20 Dec '19

Hi all, Seeing the comments that come up often about how to make various authentication methods work with password scheme X (for various values of authentication method and scheme) as well as the matrix here: http://deployingradius.com/documents/protocols/compatibility.html I'm left with a question. Is it really industry standard that people store users' passwords in cleartext? It seems to be a requirement, but it is something that gives me pause, as to do so contravenes what are otherwise best practices. -- Coy Hile coy.hile(a)coyhile.com

3 9

freeradius 3 eap /tls module rlm_tls-config
by Julien Bamberger 20 Dec '19

20 Dec '19

> Hello, > > I would like to use EAP/TLS + mac address with mariadb under Debian 10 > & Freeradius 3.0.17+dfsg-1.1. > > I create my key and certificats (PKI ok). My database is ok. > > When I launch freeradius in debug mode freeradius -XXX I have this > message : > > Debug: Failed with error: rlm_tls-config.so: cannot open shared object > file: No such file or directory > Error: /etc/freeradius/3.0/mods-enabled/eap[176]: Failed to link to > module 'rlm_tls-config': /usr/lib/freeradius/rlm_tls-config.so: cannot > open shared object file: No such file or directory > > I edit this files : radiusd.conf, mods-available/eap, > mods-available/sql, sites-enabled/default. > > Any ideas? > > Thank's you. > > Regards. > > Ju.

2 3

Freeradius with EAP and LDAP
by Juntunen, Jarkko 19 Dec '19

19 Dec '19

Hello, We have Freeradius server 3.0.16 up and running and it'll authenticate Our test users successfully via default and inner-tunnel with PAP against Our test LDAP-server. But when we try to authenticate those same test users against that very same LDAP-server from/via Meraki (Cisco) Wifi-endpoints with EAP we'll have rejected auths. We have also created some test users in Freeradius db, and if we disable LDAP from Our configs those users can authenticate without problems against Freeradius itself. I'm just a newbie with Freeradius (and radius in general as well), so can anyone help and give a hint what We are missing? All help will be appreciated. -Jarkko

4 5

Re: Freeradius with EAP and LDAP
by Juntunen, Jarkko 19 Dec '19

19 Dec '19

On Dec 19, 2019, at 12:50 PM, Juntunen, Jarkko <[hidden email] <http://freeradius.1045715.n5.nabble.com/user/SendEmail.jtp?type=node&node=5…>> wrote: > So, If we have Cleartext-passwords or NT-passwords available for users in > our LDAP-server should it work then, or is there still something to > configure on Freeradius side? > Yes, yes, and yes. Yes, that's what the web page says. Yes, that's what my >previous message said. > Yes. Did I mention that the answer to your question is "YES" ??? > I don't understand the need to ask the same question over and over. It's not > friendly. > It's like someone meeting a magical genie who says that he will answer any 3 > questions about anything: past, present, or future. The conversation then >goes as follows: >guy: Really? >genie: Yes! >guy: Really? >genie: Yes! >guy: Really? >genie: Yes! >genie: Thank you, I've answered your three questions. > Please find a way to *believe* the documentation and the email messages. > It's not difficult. > Alan DeKok. Thanks For Your help. Why so tight and unfriendly answer. If it's so obnoxiuous to answer the questions why to bother?

2 1

Re: Freeradius with EAP and LDAP
by Juntunen, Jarkko 19 Dec '19

19 Dec '19

> On Dec 19, 2019, at 12:09 PM, Juntunen, Jarkko <[hidden email] <http://freeradius.1045715.n5.nabble.com/user/SendEmail.jtp?type=node&node=5…>> wrote: > > Thanks for Your advice. We have run Freeradius in debug mode couple of > hours and the problem seems to be ( at least in my opinion) missing of > password in case of EAP authentication. And the problem is that I have no > clue how to have Cleartext-password out of EAP-MSCHAP auth. > You can't. It's impossible. > http://deployingradius.com/documents/protocols/compatibility.html > Alan DeKok. So, that means It'll be also impossible to authenticate with Freeradius and LDAP-server in case in question, if Meraki (Cisco) wifi-endpoints can only use EAP-MSCHAP authentication? Did I got this right? Jarkko Juntunen Partner / Founder / Bit Kompis Bit Kompis AB Tel. +358 44 093 1280 Kiinnostaako 3D-tulostus? <http://bitkompisab.fi/3d.html>

2 3

(no subject)
by Juntunen, Jarkko 19 Dec '19

19 Dec '19

> On Dec 19, 2019, at 12:09 PM, Juntunen, Jarkko <[hidden email] <http://freeradius.1045715.n5.nabble.com/user/SendEmail.jtp?type=node&node=5…>> wrote: > > Thanks for Your advice. We have run Freeradius in debug mode couple of > hours and the problem seems to be ( at least in my opinion) missing of > password in case of EAP authentication. And the problem is that I have no > clue how to have Cleartext-password out of EAP-MSCHAP auth. > You can't. It's impossible. > http://deployingradius.com/documents/protocols/compatibility.html > Alan DeKok. So, that means It'll be also impossible to authenticate with Freeradius and LDAP-server in case in question, if Meraki (Cisco) wifi-endpoints can only use EAP-MSCHAP authentication? Did I got this right? Jarkko Juntunen Partner / Founder / Bit Kompis Bit Kompis AB Tel. +358 44 093 1280 Kiinnostaako 3D-tulostus? <http://bitkompisab.fi/3d.html>

1 0

Freeradius on Ubuntu 19.10
by Houman 19 Dec '19

19 Dec '19

Hello, I'll be trying the latest Freeradius on Ubuntu 19.10 and I can't seem to be able to connect. Can someone please help me? Something seems to have changed. Many Thanks, (4) Received Access-Request Id 128 from 127.0.0.1:48822 to 127.0.0.1:1812 length 157 (4) User-Name = "houman" (4) NAS-Port-Type = Virtual (4) Service-Type = Framed-User (4) NAS-Port = 3 (4) NAS-Port-Id = "X-1" (4) NAS-IP-Address = 172.31.20.12 (4) Called-Station-Id = "172.31.20.12[4500]" (4) Calling-Station-Id = "185.76.230.248[38823]" (4) Acct-Session-Id = "1576757594-3" (4) EAP-Message = 0x0200000b01686f756d616e (4) NAS-Identifier = "strongSwan" (4) Message-Authenticator = 0x7e6d9c86703eecf1dc78e34980d98a68 (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) update control { (4) EXPAND %l (4) --> 1576757818 (4) &Current-Timestamp := 1576757818 (4) } # update control = noop (4) update request { rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 90 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 90 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (0): Hit idle_timeout, was idle for 90 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (5): Hit idle_timeout, was idle for 90 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 90 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (6): Hit idle_timeout, was idle for 90 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 90 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): 0 of 0 connections in use. You may need to increase "spare" rlm_sql (sql): Opening additional connection (7), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius_db' on xx.xxx.xx.xx via TCP/IP, server version 8.0.18, protocol version 10 rlm_sql (sql): Reserved connection (7) rlm_sql (sql): Released connection (7) Need 2 more connections to reach min connections (3) rlm_sql (sql): Opening additional connection (8), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius_db' on xx.xxx.xx.xx via TCP/IP, server version 8.0.18, protocol version 10 (4) EXPAND %{User-Name} (4) --> houman (4) SQL-User-Name set to 'houman' rlm_sql (sql): Reserved connection (7) (4) Executing select query: SELECT UNIX_TIMESTAMP(expires_at) FROM main_db.`user` WHERE main_db.`user`.username ='houman' rlm_sql (sql): Released connection (7) (4) EXPAND %{sql:SELECT UNIX_TIMESTAMP(expires_at) FROM main_db.`user` WHERE main_db.`user`.username ='%{User-Name}'} (4) --> 1735689600 (4) &Expires-Timestamp := 1735689600 (4) } # update request = noop (4) if (&control:Current-Timestamp > &request:Expires-Timestamp) { (4) if (&control:Current-Timestamp > &request:Expires-Timestamp) -> FALSE (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = noop (4) } # policy filter_username = noop (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "houman", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 0 length 11 (4) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Peer sent packet with method EAP Identity (1) (4) eap: Calling submodule eap_md5 to process data (4) eap_md5: Issuing MD5 Challenge (4) eap: Sending EAP Request (code 1) ID 1 length 22 (4) eap: EAP session adding &reply:State = 0xa17deb22a17ceffe (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 128 from 127.0.0.1:1812 to 127.0.0.1:48822 length 0 (4) EAP-Message = 0x0101001604103a8af45976daf8a272f4e1044cbca4ea (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xa17deb22a17ceffef01faedaf7cde45b (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 129 from 127.0.0.1:48822 to 127.0.0.1:1812 length 170 (5) User-Name = "houman" (5) NAS-Port-Type = Virtual (5) Service-Type = Framed-User (5) NAS-Port = 3 (5) NAS-Port-Id = "X-1" (5) NAS-IP-Address = 172.31.20.12 (5) Called-Station-Id = "172.31.20.12[4500]" (5) Calling-Station-Id = "185.76.230.248[38823]" (5) Acct-Session-Id = "1576757594-3" (5) EAP-Message = 0x02010006031a (5) NAS-Identifier = "strongSwan" (5) State = 0xa17deb22a17ceffef01faedaf7cde45b (5) Message-Authenticator = 0x72dac90f5d0d96fc8992a391980d751b (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) update control { (5) EXPAND %l (5) --> 1576757818 (5) &Current-Timestamp := 1576757818 (5) } # update control = noop (5) update request { rlm_sql (sql): Reserved connection (8) rlm_sql (sql): Released connection (8) (5) EXPAND %{User-Name} (5) --> houman (5) SQL-User-Name set to 'houman' rlm_sql (sql): Reserved connection (7) (5) Executing select query: SELECT UNIX_TIMESTAMP(expires_at) FROM main_db.`user` WHERE main_db.`user`.username ='houman' rlm_sql (sql): Released connection (7) (5) EXPAND %{sql:SELECT UNIX_TIMESTAMP(expires_at) FROM main_db.`user` WHERE main_db.`user`.username ='%{User-Name}'} (5) --> 1735689600 (5) &Expires-Timestamp := 1735689600 (5) } # update request = noop (5) if (&control:Current-Timestamp > &request:Expires-Timestamp) { (5) if (&control:Current-Timestamp > &request:Expires-Timestamp) -> FALSE (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = noop (5) } # policy filter_username = noop (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "houman", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 1 length 6 (5) eap: No EAP Start, assuming it's an on-going EAP conversation (5) [eap] = updated (5) sql: EXPAND %{User-Name} (5) sql: --> houman (5) sql: SQL-User-Name set to 'houman' rlm_sql (sql): Reserved connection (8) (5) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (5) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'houman' ORDER BY id (5) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'houman' ORDER BY id (5) sql: User found in radcheck table (5) sql: Conditional check items matched, merging assignment check items (5) sql: Cleartext-Password := "houman@lovesyou" (5) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (5) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'houman' ORDER BY id (5) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'houman' ORDER BY id rlm_sql (sql): Reserved connection (7) rlm_sql (sql): Released connection (7) (5) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (5) sql: --> SELECT groupname FROM radusergroup WHERE username = 'houman' ORDER BY priority (5) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'houman' ORDER BY priority (5) sql: User not found in any groups rlm_sql (sql): Released connection (8) (5) [sql] = ok (5) [expiration] = noop (5) [logintime] = noop (5) pap: WARNING: Auth-Type already set. Not setting to PAP (5) [pap] = noop (5) } # authorize = updated (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xa17deb22a17ceffe (5) eap: Finished EAP session with state 0xa17deb22a17ceffe (5) eap: Previous EAP request found for state 0xa17deb22a17ceffe, released from the list (5) eap: Peer sent packet with method EAP NAK (3) (5) eap: Found mutually acceptable type MSCHAPv2 (26) (5) eap: Calling submodule eap_mschapv2 to process data (5) eap_mschapv2: Issuing Challenge (5) eap: Sending EAP Request (code 1) ID 2 length 43 (5) eap: EAP session adding &reply:State = 0xa17deb22a07ff1fe (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 129 from 127.0.0.1:1812 to 127.0.0.1:48822 length 0 (5) EAP-Message = 0x0102002b1a01020026109ea8499d23b221fe286e0553b2afd879667265657261646975732d332e302e3139 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xa17deb22a07ff1fef01faedaf7cde45b (5) Finished request Waking up in 4.8 seconds. (6) Received Access-Request Id 130 from 127.0.0.1:48822 to 127.0.0.1:1812 length 229 (6) User-Name = "houman" (6) NAS-Port-Type = Virtual (6) Service-Type = Framed-User (6) NAS-Port = 3 (6) NAS-Port-Id = "X-1" (6) NAS-IP-Address = 172.31.20.12 (6) Called-Station-Id = "172.31.20.12[4500]" (6) Calling-Station-Id = "185.76.230.248[38823]" (6) Acct-Session-Id = "1576757594-3" (6) EAP-Message = 0x020200411a0202003c316473cdfd9ba7577369c536ec1a3732170000000000000000bdd8d54efc713f6c117e2db89759acfa868367fc3920267200686f756d616e (6) NAS-Identifier = "strongSwan" (6) State = 0xa17deb22a07ff1fef01faedaf7cde45b (6) Message-Authenticator = 0xe167fa7a298b2393526a662c1298ce92 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) update control { (6) EXPAND %l (6) --> 1576757818 (6) &Current-Timestamp := 1576757818 (6) } # update control = noop (6) update request { rlm_sql (sql): Reserved connection (8) rlm_sql (sql): Released connection (8) (6) EXPAND %{User-Name} (6) --> houman (6) SQL-User-Name set to 'houman' rlm_sql (sql): Reserved connection (7) (6) Executing select query: SELECT UNIX_TIMESTAMP(expires_at) FROM main_db.`user` WHERE main_db.`user`.username ='houman' rlm_sql (sql): Released connection (7) (6) EXPAND %{sql:SELECT UNIX_TIMESTAMP(expires_at) FROM main_db.`user` WHERE main_db.`user`.username ='%{User-Name}'} (6) --> 1735689600 (6) &Expires-Timestamp := 1735689600 (6) } # update request = noop (6) if (&control:Current-Timestamp > &request:Expires-Timestamp) { (6) if (&control:Current-Timestamp > &request:Expires-Timestamp) -> FALSE (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = noop (6) } # policy filter_username = noop (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "houman", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 2 length 65 (6) eap: No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) sql: EXPAND %{User-Name} (6) sql: --> houman (6) sql: SQL-User-Name set to 'houman' rlm_sql (sql): Reserved connection (8) (6) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (6) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'houman' ORDER BY id (6) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'houman' ORDER BY id (6) sql: User found in radcheck table (6) sql: Conditional check items matched, merging assignment check items (6) sql: Cleartext-Password := "houman@lovesyou" (6) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (6) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'houman' ORDER BY id (6) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'houman' ORDER BY id rlm_sql (sql): Reserved connection (7) rlm_sql (sql): Released connection (7) (6) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (6) sql: --> SELECT groupname FROM radusergroup WHERE username = 'houman' ORDER BY priority (6) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'houman' ORDER BY priority (6) sql: User not found in any groups rlm_sql (sql): Released connection (8) (6) [sql] = ok (6) [expiration] = noop (6) [logintime] = noop (6) pap: WARNING: Auth-Type already set. Not setting to PAP (6) [pap] = noop (6) } # authorize = updated (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xa17deb22a07ff1fe (6) eap: Finished EAP session with state 0xa17deb22a07ff1fe (6) eap: Previous EAP request found for state 0xa17deb22a07ff1fe, released from the list (6) eap: Peer sent packet with method EAP MSCHAPv2 (26) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) eap_mschapv2: authenticate { (6) mschap: Found Cleartext-Password, hashing to create NT-Password (6) mschap: Found Cleartext-Password, hashing to create LM-Password (6) mschap: Creating challenge hash with username: houman (6) mschap: Client is using MS-CHAPv2 (6) mschap: Adding MS-CHAPv2 MPPE keys (6) eap_mschapv2: [mschap] = ok (6) eap_mschapv2: } # authenticate = ok (6) eap_mschapv2: MSCHAP Success (6) eap: Sending EAP Request (code 1) ID 3 length 51 (6) eap: EAP session adding &reply:State = 0xa17deb22a37ef1fe (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 130 from 127.0.0.1:1812 to 127.0.0.1:48822 length 0 (6) EAP-Message = 0x010300331a0302002e533d33303232453237443943444437313237423132413042323041304536444630314333323741323538 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xa17deb22a37ef1fef01faedaf7cde45b (6) Finished request Waking up in 4.7 seconds. (7) Received Access-Request Id 131 from 127.0.0.1:48822 to 127.0.0.1:1812 length 170 (7) User-Name = "houman" (7) NAS-Port-Type = Virtual (7) Service-Type = Framed-User (7) NAS-Port = 3 (7) NAS-Port-Id = "X-1" (7) NAS-IP-Address = 172.31.20.12 (7) Called-Station-Id = "172.31.20.12[4500]" (7) Calling-Station-Id = "185.76.230.248[38823]" (7) Acct-Session-Id = "1576757594-3" (7) EAP-Message = 0x020300061a03 (7) NAS-Identifier = "strongSwan" (7) State = 0xa17deb22a37ef1fef01faedaf7cde45b (7) Message-Authenticator = 0x23f98c032ec4bbd63d42cd63c25f36f7 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) update control { (7) EXPAND %l (7) --> 1576757818 (7) &Current-Timestamp := 1576757818 (7) } # update control = noop (7) update request { rlm_sql (sql): Reserved connection (8) rlm_sql (sql): Released connection (8) (7) EXPAND %{User-Name} (7) --> houman (7) SQL-User-Name set to 'houman' rlm_sql (sql): Reserved connection (7) (7) Executing select query: SELECT UNIX_TIMESTAMP(expires_at) FROM main_db.`user` WHERE main_db.`user`.username ='houman' rlm_sql (sql): Released connection (7) (7) EXPAND %{sql:SELECT UNIX_TIMESTAMP(expires_at) FROM main_db.`user` WHERE main_db.`user`.username ='%{User-Name}'} (7) --> 1735689600 (7) &Expires-Timestamp := 1735689600 (7) } # update request = noop (7) if (&control:Current-Timestamp > &request:Expires-Timestamp) { (7) if (&control:Current-Timestamp > &request:Expires-Timestamp) -> FALSE (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = noop (7) } # policy filter_username = noop (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "houman", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 3 length 6 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) sql: EXPAND %{User-Name} (7) sql: --> houman (7) sql: SQL-User-Name set to 'houman' rlm_sql (sql): Reserved connection (8) (7) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (7) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'houman' ORDER BY id (7) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'houman' ORDER BY id (7) sql: User found in radcheck table (7) sql: Conditional check items matched, merging assignment check items (7) sql: Cleartext-Password := "houman@lovesyou" (7) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (7) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'houman' ORDER BY id (7) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'houman' ORDER BY id rlm_sql (sql): Reserved connection (7) rlm_sql (sql): Released connection (7) Need 1 more connections to reach min connections (3) rlm_sql (sql): Opening additional connection (9), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius_db' on xx.xxx.xx.xx via TCP/IP, server version 8.0.18, protocol version 10 (7) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (7) sql: --> SELECT groupname FROM radusergroup WHERE username = 'houman' ORDER BY priority (7) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'houman' ORDER BY priority (7) sql: User not found in any groups rlm_sql (sql): Released connection (8) (7) [sql] = ok (7) [expiration] = noop (7) [logintime] = noop (7) pap: WARNING: Auth-Type already set. Not setting to PAP (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xa17deb22a37ef1fe (7) eap: Finished EAP session with state 0xa17deb22a37ef1fe (7) eap: Previous EAP request found for state 0xa17deb22a37ef1fe, released from the list (7) eap: Peer sent packet with method EAP MSCHAPv2 (26) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap: Sending EAP Success (code 3) ID 3 length 4 (7) eap: Freeing handler (7) [eap] = ok (7) } # authenticate = ok (7) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (7) post-auth { (7) update reply { (7) Acct-Interim-Interval = 300 (7) } # update reply = noop (7) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (7) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (7) update { (7) No attributes updated for RHS &session-state: (7) } # update = noop (7) policy sql_session_start.post-auth { (7) policy acct_unique { (7) update request { (7) &Tmp-String-9 := "ai:" (7) } # update request = noop (7) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (7) EXPAND %{hex:&Class} (7) --> (7) EXPAND ^%{hex:&Tmp-String-9} (7) --> ^61693a (7) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (7) else { (7) update request { (7) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (7) --> 4777c724ef84c2fd714218f9256dac76 (7) &Acct-Unique-Session-Id := 4777c724ef84c2fd714218f9256dac76 (7) } # update request = noop (7) } # else = noop (7) } # policy acct_unique = noop (7) sql: EXPAND %{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query} (7) sql: --> type.post-auth.query (7) sql: Using query template 'query' rlm_sql (sql): Reserved connection (8) (7) sql: EXPAND %{User-Name} (7) sql: --> houman (7) sql: SQL-User-Name set to 'houman' (7) sql: EXPAND INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, framedipv6address, framedipv6prefix, framedinterfaceid, delegatedipv6prefix) VALUES('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}', NULLIF('%{%{NAS-Port-ID}:-%{NAS-Port}}', ''), '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, NULL, 0, '', '%{Connect-Info}', NULL, 0, 0, '%{Called-Station-Id}', '%{Calling-Station-Id}', NULL, '%{Service-Type}', NULL, '', '', '', '', '') (7) sql: --> INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, framedipv6address, framedipv6prefix, framedinterfaceid, delegatedipv6prefix) VALUES('1576757594-3', '4777c724ef84c2fd714218f9256dac76', 'houman', '', '172.31.20.12', NULLIF('X-1', ''), 'Virtual', FROM_UNIXTIME(1576757818), NULL, NULL, 0, '', '', NULL, 0, 0, '172.31.20.12=5B4500=5D', '185.76.230.248=5B38823=5D', NULL, 'Framed-User', NULL, '', '', '', '', '') (7) sql: Executing query: INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, framedipv6address, framedipv6prefix, framedinterfaceid, delegatedipv6prefix) VALUES('1576757594-3', '4777c724ef84c2fd714218f9256dac76', 'houman', '', '172.31.20.12', NULLIF('X-1', ''), 'Virtual', FROM_UNIXTIME(1576757818), NULL, NULL, 0, '', '', NULL, 0, 0, '172.31.20.12=5B4500=5D', '185.76.230.248=5B38823=5D', NULL, 'Framed-User', NULL, '', '', '', '', '') (7) sql: ERROR: rlm_sql_mysql: ERROR 1054 (Unknown column 'framedipv6address' in 'field list'): 42S22 (7) sql: SQL query returned: server error rlm_sql (sql): Released connection (8) (7) [sql.accounting] = fail (7) } # policy sql_session_start.post-auth = fail (7) } # post-auth = fail (7) Using Post-Auth-Type Reject (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Post-Auth-Type REJECT { (7) sql: EXPAND .query (7) sql: --> .query (7) sql: Using query template 'query' rlm_sql (sql): Reserved connection (7) (7) sql: EXPAND %{User-Name} (7) sql: --> houman (7) sql: SQL-User-Name set to 'houman' (7) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (7) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'houman', '', 'Access-Reject', '2019-12-19 12:16:58') (7) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'houman', '', 'Access-Reject', '2019-12-19 12:16:58') (7) sql: SQL query returned: success (7) sql: 1 record(s) updated rlm_sql (sql): Released connection (7) (7) [sql] = ok (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject: --> houman (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) [eap] = noop (7) policy remove_reply_message_if_eap { (7) if (&reply:EAP-Message && &reply:Reply-Message) { (7) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (7) else { (7) [noop] = noop (7) } # else = noop (7) } # policy remove_reply_message_if_eap = noop (7) } # Post-Auth-Type REJECT = updated (7) Delaying response for 1.000000 seconds Waking up in 0.1 seconds. Waking up in 0.8 seconds. (7) Sending delayed response (7) Sent Access-Reject Id 131 from 127.0.0.1:1812 to 127.0.0.1:48822 length 44 (7) EAP-Message = 0x03030004 (7) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.5 seconds. (4) Cleaning up request packet ID 128 with timestamp +95 Waking up in 0.1 seconds. (5) Cleaning up request packet ID 129 with timestamp +95 Waking up in 0.1 seconds. (6) Cleaning up request packet ID 130 with timestamp +95 Waking up in 0.2 seconds. (7) Cleaning up request packet ID 131 with timestamp +95 Ready to process requests

3 12