June 2019 - Freeradius-Users - lists.freeradius.org

Freeradius 3 DHCP server with SQL and 'anty dos' protection, how?
by Kamil de Bardon 26 Jun '19

26 Jun '19

Hello, I configure freeradius to be a unicast dhcp server for working with Cisco ASR. client --> cisco relay -> freeradius My configuration is: dhcp DHCP-Discover { if ( "%{mms: ${..ip_query}}" ) { update reply { DHCP-Message-Type = DHCP-Offer } update reply { &DHCP-Your-IP-Address = "%{mms: ${....ip_query} }" &DHCP-Subnet-Mask = "%{mms: ${....mask_query} }" &DHCP-Router-Address = "%{mms: ${....gw_query} }" &DHCP-Domain-Name-Server = "%{mms: ${....ns1_query} }" &DHCP-Domain-Name-Server += "%{mms: ${....ns2_query} }" &DHCP-IP-Address-Lease-Time = _DHCP_LEASE_TIME_ } ok } else { update reply { &DHCP-Message-Type = DHCP-Do-Not-Respond } reject } } dhcp DHCP-Request { update reply { &DHCP-Message-Type = DHCP-Ack } update reply { &DHCP-Your-IP-Address = "%{mms: ${...ip_query} }" &DHCP-Subnet-Mask = "%{mms: ${...mask_query} }" &DHCP-Router-Address = "%{mms: ${...gw_query} }" &DHCP-Domain-Name-Server = "%{mms: ${...ns1_query} }" &DHCP-Domain-Name-Server += "%{mms: ${...ns2_query} }" &DHCP-IP-Address-Lease-Time = _DHCP_LEASE_TIME_ } ok } This is working, but my concern is, if client's mac adres is not in the database, they dhcp client will send dhcp-discovery all the time, and one discovery = one sql query. Is there any way to prevent that? Some cache or so? Thanks for help.

3 5

EAP-TTLS proxiing the tunneled request fails
by Ekkehard Burkon 25 Jun '19

25 Jun '19

Hi, I spent a bit of time on this but can't get it to work. My goal is to have a freeradius server handle EAP authentication with the EAP typ being EAP-TTLS. The data from the tunneled request should be proxied to an other radius server. I got as far as that. The proxy gets the request and answers it accordingly. But to me it looks like freeradius does not put enough info into that request and then looses track of things. The info sent to the AP is a plain accept with no EAP-Message and Message-Authenticator attribute. Accordingly the whole thing does not work. (The EAP-TLS stuff is working) I include the config. I tried to keep just the necessary stuff and a debug output from one request. Would somone be willing to help me a bit with this? Thank you Ekkehard sites-enabled/default: server default { listen { type = auth ipaddr = * port = 1812 } authorize { eap { ok = return updated = return } } authenticate { eap } post-auth { Post-Auth-Type REJECT { attr_filter.access_reject linelog_send_reject } } } sites-enabled/eap-inner: server eap-inner { authorize { update control { Proxy-To-Realm := "NPS" } } authenticate { eap } post-proxy { eap } } proxy.conf: home_server ad_nps1 { ipaddr = 10.0.0.21 secret = biscplus status_check = status-server response_window = 5 check_interval = 10 check_timeout = 5 } home_server_pool bis_ad { type = keyed-balance home_server = ad_nps1 } realm NPS { auth_pool = bis_ad nostrip } mods-enabled/eap: eap { default_eap_type = ttls timer_expire = 60 max_sessions = ${max_requests} tls-config tls-common { certificate_file = ${certdir}/radius3.crt private_key_file = ${certdir}/radius3.key # private_key_password = 12345678 ca_file = ${cadir}/BIS-ROOT-1.pem fragment_size = 1024 ocsp { enable = yes override_cert_url = no use_nonce = yes } } tls { tls = tls-common virtual_server = check-eap-tls } ttls { tls = tls-common default_eap_type = mschapv2 copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "eap-inner" } } Im testing with eapol here is the debug output from freeradius: (0) Received Access-Request Id 0 from 127.0.0.1:38193 to 127.0.0.1:1812 length 174 (0) User-Name = "anonymous(a)admin.bis-school.com" (0) NAS-IP-Address = 127.0.0.1 (0) Calling-Station-Id = "02-00-00-00-00-01" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Connect-Info = "CONNECT 11Mbps 802.11b" (0) EAP-Message = 0x02e3002301616e6f6e796d6f75734061646d696e2e6269732d7363686f6f6c2e636f6d (0) Message-Authenticator = 0x90f2882e640a53847b562bcdd8d88046 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) eap: Peer sent EAP Response (code 2) ID 227 length 35 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: Initiating new EAP-TLS session (0) eap_ttls: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 228 length 6 (0) eap: EAP session adding &reply:State = 0xbdbe794dbd5a6c9b (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:38193 length 0 (0) EAP-Message = 0x01e400061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xbdbe794dbd5a6c9b1371e49bfa915200 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 1 from 127.0.0.1:38193 to 127.0.0.1:1812 length 335 (1) User-Name = "anonymous(a)admin.bis-school.com" (1) NAS-IP-Address = 127.0.0.1 (1) Calling-Station-Id = "02-00-00-00-00-01" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Connect-Info = "CONNECT 11Mbps 802.11b" (1) EAP-Message = 0x02e400b2150016030100a7010000a30303e90f8da43470e52c2afaa380c820e5a50c293ac3050b815924910aec99ae5410000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff01000042000b0004030001 (1) State = 0xbdbe794dbd5a6c9b1371e49bfa915200 (1) Message-Authenticator = 0x4938ad10c3b7d3495950fa889670e64e (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) eap: Peer sent EAP Response (code 2) ID 228 length 178 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xbdbe794dbd5a6c9b (1) eap: Finished EAP session with state 0xbdbe794dbd5a6c9b (1) eap: Previous EAP request found for state 0xbdbe794dbd5a6c9b, released from the list (1) eap: Peer sent packet with method EAP TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Authenticate (1) eap_ttls: Continuing EAP-TLS (1) eap_ttls: Got final TLS record fragment (172 bytes) (1) eap_ttls: WARNING: Total received TLS record fragments (172 bytes), does not equal indicated TLS record length (0 bytes) (1) eap_ttls: [eaptls verify] = ok (1) eap_ttls: Done initial handshake (1) eap_ttls: (other): before SSL initialization (1) eap_ttls: TLS_accept: before SSL initialization (1) eap_ttls: TLS_accept: before SSL initialization (1) eap_ttls: <<< recv TLS 1.2 [length 00a7] (1) eap_ttls: TLS_accept: SSLv3/TLS read client hello (1) eap_ttls: >>> send TLS 1.2 [length 003d] (1) eap_ttls: TLS_accept: SSLv3/TLS write server hello (1) eap_ttls: >>> send TLS 1.2 [length 097a] (1) eap_ttls: TLS_accept: SSLv3/TLS write certificate (1) eap_ttls: >>> send TLS 1.2 [length 014d] (1) eap_ttls: TLS_accept: SSLv3/TLS write key exchange (1) eap_ttls: >>> send TLS 1.2 [length 0004] (1) eap_ttls: TLS_accept: SSLv3/TLS write server done (1) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done (1) eap_ttls: In SSL Handshake Phase (1) eap_ttls: In SSL Accept mode (1) eap_ttls: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 229 length 1014 (1) eap: EAP session adding &reply:State = 0xbdbe794dbc5b6c9b (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:38193 length 0 (1) EAP-Message = 0x01e503f615c000000b1c160303003d02000039030354a1c912b7f4ffec22fbff6a7f9f77e8ef4c67e6b6bc2e97d069f79fe3e1c7f300c030000011ff01000100000b00040300010200170000160303097a0b0009760009730005b0308205ac30820494a003020102020a1b9b4d9f000000000004300d06 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xbdbe794dbc5b6c9b1371e49bfa915200 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 2 from 127.0.0.1:38193 to 127.0.0.1:1812 length 163 (2) User-Name = "anonymous(a)admin.bis-school.com" (2) NAS-IP-Address = 127.0.0.1 (2) Calling-Station-Id = "02-00-00-00-00-01" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Connect-Info = "CONNECT 11Mbps 802.11b" (2) EAP-Message = 0x02e500061500 (2) State = 0xbdbe794dbc5b6c9b1371e49bfa915200 (2) Message-Authenticator = 0x80b05a75c57103e50a0d4ca23f52ecdc (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) eap: Peer sent EAP Response (code 2) ID 229 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xbdbe794dbc5b6c9b (2) eap: Finished EAP session with state 0xbdbe794dbc5b6c9b (2) eap: Previous EAP request found for state 0xbdbe794dbc5b6c9b, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: Continuing EAP-TLS (2) eap_ttls: Peer ACKed our handshake fragment (2) eap_ttls: [eaptls verify] = request (2) eap_ttls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 230 length 1014 (2) eap: EAP session adding &reply:State = 0xbdbe794dbf586c9b (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:38193 length 0 (2) EAP-Message = 0x01e603f615c000000b1c2b060105050730028681ae6c6461703a2f2f2f434e3d4249532d41442d43412d524f4f542d312c434e3d4149412c434e3d5075626c69632532304b657925323053657276696365732c434e3d53657276696365732c434e3d436f6e66696775726174696f6e2c44433d61646d69 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xbdbe794dbf586c9b1371e49bfa915200 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 3 from 127.0.0.1:38193 to 127.0.0.1:1812 length 163 (3) User-Name = "anonymous(a)admin.bis-school.com" (3) NAS-IP-Address = 127.0.0.1 (3) Calling-Station-Id = "02-00-00-00-00-01" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Connect-Info = "CONNECT 11Mbps 802.11b" (3) EAP-Message = 0x02e600061500 (3) State = 0xbdbe794dbf586c9b1371e49bfa915200 (3) Message-Authenticator = 0xbc676bdb840006d114c4d5534e697668 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) eap: Peer sent EAP Response (code 2) ID 230 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xbdbe794dbf586c9b (3) eap: Finished EAP session with state 0xbdbe794dbf586c9b (3) eap: Previous EAP request found for state 0xbdbe794dbf586c9b, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: Continuing EAP-TLS (3) eap_ttls: Peer ACKed our handshake fragment (3) eap_ttls: [eaptls verify] = request (3) eap_ttls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 231 length 846 (3) eap: EAP session adding &reply:State = 0xbdbe794dbe596c9b (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:38193 length 0 (3) EAP-Message = 0x01e7034e158000000b1c1f7cf0bc75d77cef8ab1e0b0d70191863666447688049d6a7b1370086e925c81e494c817e89e76fbb35b20f9dd06a9a3edea94d217cb02c06c49165a619bf474d673c14496ade687ac8eeb28fb22dc57c02faeb327ad534fbd530430d48ceb3067670310f50203010001a36930 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xbdbe794dbe596c9b1371e49bfa915200 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 4 from 127.0.0.1:38193 to 127.0.0.1:1812 length 289 (4) User-Name = "anonymous(a)admin.bis-school.com" (4) NAS-IP-Address = 127.0.0.1 (4) Calling-Station-Id = "02-00-00-00-00-01" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Connect-Info = "CONNECT 11Mbps 802.11b" (4) EAP-Message = 0x02e7008415001603030046100000424104297d569882c17684c3dc575059bea02a61f3ccf021334a9ece982c33ed5796948b42fbc1e19db50b55234a58e24364f2cd6d3a87f0b6ae0bcdf5aee053d61cde1403030001011603030028b248fc46d27b63d070e1cffbdac668845d9ef5b05c90fb9f7a8540 (4) State = 0xbdbe794dbe596c9b1371e49bfa915200 (4) Message-Authenticator = 0x81790218229b4d6b27a2b1d421eadae2 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) eap: Peer sent EAP Response (code 2) ID 231 length 132 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xbdbe794dbe596c9b (4) eap: Finished EAP session with state 0xbdbe794dbe596c9b (4) eap: Previous EAP request found for state 0xbdbe794dbe596c9b, released from the list (4) eap: Peer sent packet with method EAP TTLS (21) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: Authenticate (4) eap_ttls: Continuing EAP-TLS (4) eap_ttls: [eaptls verify] = ok (4) eap_ttls: Done initial handshake (4) eap_ttls: TLS_accept: SSLv3/TLS write server done (4) eap_ttls: <<< recv TLS 1.2 [length 0046] (4) eap_ttls: TLS_accept: SSLv3/TLS read client key exchange (4) eap_ttls: TLS_accept: SSLv3/TLS read change cipher spec (4) eap_ttls: <<< recv TLS 1.2 [length 0010] (4) eap_ttls: TLS_accept: SSLv3/TLS read finished (4) eap_ttls: >>> send TLS 1.2 [length 0001] (4) eap_ttls: TLS_accept: SSLv3/TLS write change cipher spec (4) eap_ttls: >>> send TLS 1.2 [length 0010] (4) eap_ttls: TLS_accept: SSLv3/TLS write finished (4) eap_ttls: (other): SSL negotiation finished successfully (4) eap_ttls: SSL Connection Established (4) eap_ttls: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 232 length 61 (4) eap: EAP session adding &reply:State = 0xbdbe794db9566c9b (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Sent Access-Challenge Id 4 from 127.0.0.1:1812 to 127.0.0.1:38193 length 0 (4) EAP-Message = 0x01e8003d1580000000331403030001011603030028bfbb1165dab6d3ad067fd077e0b86fe6b330caa641fd7cf9d71fd3dfa7b7eadf624b79c8c4540ecd (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xbdbe794db9566c9b1371e49bfa915200 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 5 from 127.0.0.1:38193 to 127.0.0.1:1812 length 252 (5) User-Name = "anonymous(a)admin.bis-school.com" (5) NAS-IP-Address = 127.0.0.1 (5) Calling-Station-Id = "02-00-00-00-00-01" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Connect-Info = "CONNECT 11Mbps 802.11b" (5) EAP-Message = 0x02e8005f15001703030054b248fc46d27b63d18e71ab2e68197c93122eb1f823fa8da0434c2d0edc8b721d9cdf48ddbce73bc70c4972173f0f3be19ae64431f975dae8effdb0968999b9713f74d23b61fef09f910913280e446ce0a43e7465 (5) State = 0xbdbe794db9566c9b1371e49bfa915200 (5) Message-Authenticator = 0x1e1efc4e85e5088d06e33b64894a3579 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) eap: Peer sent EAP Response (code 2) ID 232 length 95 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xbdbe794db9566c9b (5) eap: Finished EAP session with state 0xbdbe794db9566c9b (5) eap: Previous EAP request found for state 0xbdbe794db9566c9b, released from the list (5) eap: Peer sent packet with method EAP TTLS (21) (5) eap: Calling submodule eap_ttls to process data (5) eap_ttls: Authenticate (5) eap_ttls: Continuing EAP-TLS (5) eap_ttls: [eaptls verify] = ok (5) eap_ttls: Done initial handshake (5) eap_ttls: [eaptls process] = ok (5) eap_ttls: Session established. Proceeding to decode tunneled attributes (5) eap_ttls: Got tunneled request (5) eap_ttls: User-Name = "eburkon(a)admin.bis-school.com" (5) eap_ttls: User-Password = "dumbo888" (5) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (5) eap_ttls: Sending tunneled request (5) Virtual server eap-inner received request (5) User-Name = "eburkon(a)admin.bis-school.com" (5) User-Password = "dumbo888" (5) FreeRADIUS-Proxied-To = 127.0.0.1 (5) NAS-IP-Address = 127.0.0.1 (5) Calling-Station-Id = "02-00-00-00-00-01" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Connect-Info = "CONNECT 11Mbps 802.11b" (5) server eap-inner { (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/eap-inner (5) authorize { (5) update control { (5) Proxy-To-Realm := "NPS" (5) } # update control = noop (5) } # authorize = noop (5) } # server eap-inner (5) Virtual server sending reply (5) eap_ttls: Tunneled authentication will be proxied to NPS (5) eap: WARNING: Tunneled session will be proxied. Not doing EAP (5) [eap] = handled (5) } # authenticate = handled (5) Starting proxy to home server 10.0.0.21 port 1812 (5) Proxying request to home server 10.0.0.21 port 1812 timeout 5.000000 (5) Sent Access-Request Id 1 from 0.0.0.0:38924 to 10.0.0.21:1812 length 156 (5) User-Name = "eburkon(a)admin.bis-school.com" (5) User-Password = "dumbo888" (5) NAS-IP-Address = 127.0.0.1 (5) Calling-Station-Id = "02-00-00-00-00-01" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Connect-Info = "CONNECT 11Mbps 802.11b" (5) Message-Authenticator := 0x00 (5) Proxy-State = 0x35 Waking up in 0.3 seconds. (5) Marking home server 10.0.0.21 port 1812 alive (5) Clearing existing &reply: attributes (5) Received Access-Accept Id 1 from 10.0.0.21:1812 to 10.9.0.204:38924 length 146 (5) Proxy-State = 0x35 (5) Filter-Id = "fallback" (5) Framed-Protocol = PPP (5) Reply-Message = "Ohmei" (5) Service-Type = Framed-User (5) Class = 0x83c3078e00000137000102000a00001500000000f566755d44f84d2101d5264eda20537f0000000000002e18 (5) MS-Link-Utilization-Threshold = 50 (5) MS-Link-Drop-Time-Limit = 120 (5) MS-MPPE-Encryption-Policy = Encryption-Required (5) MS-MPPE-Encryption-Types = 14 (5) Found Auth-Type = eap (5) Found Auth-Type = Accept (5) ERROR: Warning: Found 2 auth-types on request for user 'anonymous(a)admin.bis-school.com' (5) Auth-Type = Accept, accepting the user (5) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (5) Sent Access-Accept Id 5 from 127.0.0.1:1812 to 127.0.0.1:38193 length 0 (5) Filter-Id = "fallback" (5) Framed-Protocol = PPP (5) Reply-Message = "Ohmei" (5) Service-Type = Framed-User (5) Class = 0x83c3078e00000137000102000a00001500000000f566755d44f84d2101d5264eda20537f0000000000002e18 (5) MS-Link-Utilization-Threshold = 50 (5) MS-Link-Drop-Time-Limit = 120 (5) MS-MPPE-Encryption-Policy = Encryption-Required (5) MS-MPPE-Encryption-Types = 14 (5) Finished request Waking up in 4.9 seconds. : Trusted Network GmbH : Max-Planck-Str. 1 : D-85716 Unterschleissheim : Telefon: 089 / 54 80 163 - 0 : Telefax: 089 / 54 80 163 - 222 : Web: http://www.tnib.de<http://www.tnib.de/> : Geschaeftsfuehrer: Joerg Staedele, Stefan Kinner : Sitz der Gesellschaft: Unterschleissheim : Registergericht: AG Muenchen HRB 108 388 Die Informationspflichten zum Datenschutz, insbesondere zur Rechtsgrundlage zur Mandantenkommunikation, finden Sie unter https://www.trusted-network.de/datenschutz

3 3

separating Useres
by myxmail1919＠yahoo.com 24 Jun '19

24 Jun '19

Hi Guys, i have freeradius 3.0.15 and Mysql DB we use MAC authentication so everyone allowed to connect if they are not exceeded their limits. (anonymusers , not exist in DB ) In /etc/freeradius/3.0/sites-available/default I have update control { Max-Daily-Session= 1800 } update control { Acct-Output-Octets := 307200 } So by default every user has 1800 Seconds and 300 Mb daily limit is there anyway to make exception for some users ? like 7200 seconds and 1 Gb daily limit Thanks

1 1

FREERADIUS - show VLAN in radacct's NAS-PORT-ID column
by JAHANZAIB SYED 23 Jun '19

23 Jun '19

IN A tEST lab, We are using an old box with FreeRADIUS Version 2.2.8 along with Mikrotik routerboard (v6.43.3) as NAS. Vlans are properly configured. users connect via pppoe service. Each Vlan has pppoe server assigned. in Radacct "nas-port-id" column, how can we show VLAN name or Vlan number instead of just numbers. currently in radacct we can see this NAS-PORT-ID column: 1548484 NAS-PORT-ID column: 1529618 at another network I can saw the VLAN names there, like NAS-PORT-ID column: Vlan11 NAS-PORT-ID column: vlan20 is there any additional config required on freeradius to achieve this ? Regards, J.Z <http:///>

2 1

Conflicting vs Duplicate
by Bassem Mettichi 21 Jun '19

21 Jun '19

Hello, could you please give me the difference between conflicting packet and ducplicate packet? Thanks Bassem

2 1

problem with Simultaneous-Use roaming
by Mustafa Nassir 21 Jun '19

21 Jun '19

hi there i have problem with 802.1X , i have multi openwrt access point all it work with wpa2-enterprise and freeradius server with mysql in other side , in freeradius i enable Simultaneous-Use my problem is when my users move from first ap to second or to third ap its disconnect and reconnect and in some time its take over 10-30 second to reconnect successful . i set ideal time-out 1s and life-time 1s . its reconnect faster than first one , but its stay disconnect when they move , any idea ? Note: when i disable Simultaneous-Use its work fine and client stay connect but when i enable it i see this problem . Note: I use value 1 for Simultaneous-Use .

4 8

EAP-AKA support in FreeRADIUS
by sangram kishore 20 Jun '19

20 Jun '19

Hi Experts, I am using FreeRADIUS (3.0.19). Does FreeRADIUS support EAP-AKA? If yes, please share the pointers to the code, build commands and sample configurations for the same. Much appreciated any help here. Thanks, Sangram Kishore

2 4

How *not* to do research: MS NPS vs FreeRADIUS
by Alan DeKok 20 Jun '19

20 Jun '19

I found a fun paper today. Their conclusion? MS NPS is faster than FreeRADIUS! http://iajit.org/PDF/November%202019,%20No.%206/13255.pdf Some quotes, and my comments follow. The research revealed that FreeRADIUS by default allows the support for a variety of authentication methods including the ones using clear text passwords. This is okay if the implementer thinks of a broader compatibility but at the same time allows the network intruders may manipulate the user passwords. Additionally, FreeRADIUS was trying to initiate full authentication sessions when only reconnections were required. This ended up in increased overhead of the authentication system Comment: They didn't enable fast session resumption, so FreeRADIUS didn't use it. They then blamed FreeRADIUS for not using it. This is proven via the following statement: Overhead in reconnections were large in FreeRADIUS as it initiated a new EAP session altogether, resulting in an overhead nearly equal to that of a complete authentication phase. Comment: Yes, if you don't enable fast session resumption, FreeRADIUS does a complete authentication. It's not "nearly equal" to a complete authentication, it *is* a complete authentication. In addition to the RADIUS service, Microsoft NPS was capable of checking the health state of the connecting client and any non-compliant clients can be blocked or applied for automatic remediation of network health procedures. Comment: Not true. FreeRADIUS has had SoH support for a long time now. And further, it's not a surprise that MS products work together with proprietary MS protocols. Overhead in failed authentications were observed lower in Microsoft NPS Comment: Because FreeRADIUS has "reject_delay = 1" by default. For security reason. However, MS NPS doesn't do this. So it's less secure, but it's faster! Microsoft NPS has better performance for successfully authenticated sessions. Comment: Because they didn't change the default configuration. Which does all kinds of things that are useful to many people, but which aren't required for PEAP. The take-away is: * it's easy to generate fake statistics if you're willing to do a hack job of analysis * the default configuration of MS NPS is optimized for Windows and PEAP * the default configuration of FreeRADIUS is optimized to work everywhere Don't be fooled by nice graphs and polite lies. This only worth of this paper is to show people how *not* to write a paper. Alan DeKok.

2 1

clarification on eap configuration files and certificates
by Marco Santantonio 20 Jun '19

20 Jun '19

hi all, I have some doubts about eap module configuration file. In my organization we use a public CA for radius server certificates. The freeradius version is 3.0.12 from debian stable repository. What's the difference between: 1) setting only the server certificate in "certificate_file" and using "ca_file" to indicate the certificate of authority that issued "certificate_file" OR 2) set in "certificate_file" not only the server certificate, but also all of the CA certificates used to sign the server certificate and comment "ca_file" (this is my current configuration) I ask you this question because the ultimate goal is to deny use of EAP-TLS and allow only PEAP. I have read various posts with different solutions and I am a bit confused. Thank you! Marco -- **************************************** Marco Santantonio Direzione Sistemi Informativi, Portale, E-learning Sezione Fonia, VoIP e WiFi www.unito.it ****************************************

2 5

failed linking to libcrypto error during compilation from source
by Tal Nur 20 Jun '19

20 Jun '19

Hi all, I tried to compile FR from source on my Ubuntu 18.04 server according the instructions on wiki.freeradius.org.When I run ./configure command I got error: failed linking to libcrypto error I found the location of libcrypro.so.1.1. And run again ./configure command with explicit path to libcrypto.so..1.1: ./configure --with-openssl-lib-dir=/usr/lib/x86_64-linux-gnu/But I got again the same error message: failed linking to libcrypto error How can I fix the problem? Regards, nurtal

3 2