December 2022 - Freeradius-Users - lists.freeradius.org

Authenticate to AD but only allow certain group
by Brian C. Huffman 16 Aug '25

16 Aug '25

All, I've got authentication working nicely with MSCHAP, but now I'd like to only allow users that are members of a certain AD group. I would prefer to have this happen only when requests come from a specific client (wireless access point). In this case the idea is to have users only be able to get wireless access when they're in a specific AD group. How can I do this in freeradius? Thanks, Brian

7 18

Monitor the number of open EAP sessions
by Sergey Marochkin 23 Nov '23

23 Nov '23

Hi everyone! I am facing a problem when freeradius reports that the limit of open sessions has been reached. These are log entries, like "Too many open sessions. Try increasing "max_sessions" in the EAP module configuration". During the debugging, it was determined that some ios devices (ipad/iphone), for a reason unknown to me, cyclically cannot complete eap/tls authentication process. I found that these devices successfully start communicating with the NAS (send EAP-Response/Identity). But after receiving the (TLS Start)-message, they no longer send the (TLS client_hello)-message, and restart the association process with the access point and therefore open a new EAP session. If recreate a wifi connection on such a device, it will connect successfully. Until I find the root cause of this behavior, I would like to monitor the number of open sessions of the radius server. But I couldn't find a suitable way to do it. Here is what I tried: - use the "status server" tool, but there is no suitable one among its counters - use tool "control-socket" and radmin but also i didn't find suitable counter Can you help me with this question? Thanks!

2 4

IKEv2 VPN clients and 2FA
by Markus Winkler 22 Mar '23

22 Mar '23

Hi all, I hope I may ask you regarding this topic. I have a test setup of OPNsense firewall, FreeRADIUS 3.2.0 and using Linux, Mac and especially Windows 10 (with the native Windows client) IKEv2 VPN clients. OPNsense / Phase 1 is configured to use EAP-RADIUS (i.e. FreeRADIUS) which is authenticating the VPN users against Active Directory. The VPN clients are using IKEv2 and EAP-MSCHAPv2 with (AD-) username and password. I use winbind for authentication (https://wiki.freeradius.org/guide/Active-Directory-direct-via-winbind) and do an additional check if the user is member of a special AD group (via LDAP). These are the key points. And so far it's working fine. But: I have the demand to use 2FA (especially OTP) to increase the security of the VPN access. And that's my very question: I searched around, read tons of articles etc. if that's possible and if yes, what would be the best way to achive this goal. Among others I found this: https://wiki.freeradius.org/guide/2FA-Active-Directory-plus-Proxy and would like to ask if someone has such an environment with Windows 10 clients and used it with e.g. privacyIDEA, OpenOTP or similar systems (other than the mentioned Gemalto Safenet Authentication Services)? It would be the best if the OTP system is running on-prem. Could this work and is it worth the effort to setup such a system? Any feedback is highly appreciated. Thank you and best regards, Markus

4 5

RADIUS failing to start correctly when remote DB is unavailable.
by Sea Gull 31 Jan '23

31 Jan '23

Hi, Good afternoon! I have a setup where RADIUS is set to write to multiple DBs simultaneously. I have set this as follows: 1. Copied the SQL instance in /etc/raddb/mods-enabled/sql and had it renamed and configured accordingly. 2. Called them both 3. In the pool, I have set start=0 4. Set read_client to no Although from debug these seem to be correctly set, I am still getting the message that RADIUS is trying to connect to the DB when it is unavailable. After quite a number of minutes and 3 retries, RADIUS fails to start. I have attached the full debug and included some explanation too along the way. Thanks in advance. Kind Regards, SG

3 9

Wi-Fi WPA EAP type negotiation question
by d tbsky 29 Dec '22

29 Dec '22

Hi: I had used freeradius EAP-PEAP-MSCHAPv2 + EAP-PEAP-GTC with Wi-Fi for several years. I had a concept in mind (which seems wrong) that a client would send EAP requests blindly. so client and server should set up correct EAP type parameters before connection. When I found that Win10 supports EAP-TTLS natively, I tried to use it. and I found that when I switch EAP-PEAP/EAP-TTLS settings at freeradius, Win10 and IOS/MacOS would detect it automatically and use the correct EAP type. I use "radiusd -X" to monitor the traffic, it seems freeradius would send something to the client at first response, although I don't know what's inside the EAP Message. I found Win10 will auto detect/support EAP-PEAP-MSCHAPv2/PEAP-TTLS-GTC/PEAP-TTLS-PAP. IOS/MacOS will auto detect/support EAP-PEAP-MSCHAPv2/EAP-PEAP-GTC/EAP-TTLS-GTC. but IOS/MacOS didn't detect EAP-TTLS-PAP. so I don't know if "default_eap_type = pap" is a correct parameter under the ttls section. Win10/Win11 will auto detect and accept PEAP-TTLS-GTC as PEAP-TTLS-PAP which seems strange but a good thing to me.Android seems lazy and doesn't auto-detect anything and just wants the user to input EAP parameters manually. Is there documents about what's behind the scene? Can I decode the EAP Message to know what information is exchanged between client and server? Thanks a lot for the clarification!! Regards, tbskyd

3 2

Centralized accounting and coa/disconnect
by BuzzSaw Code 28 Dec '22

28 Dec '22

We have several distributed RADIUS servers that have been using the robust-proxy-accounting model to centrally log accounting information into a mysql database. Now we want to use that info for coa/disconnects. In the coa virtual server example, the RADIUS server gets a coa packet, then looks up the required data to form the coa packet to send to the NAS. Is there a way to have the centralized accounting server receive the disconnect packet, lookup the info in that mysql instance, then proxy that to the right source RADIUS server, so that server can send the coa (or disconnect) to the NAS ? Some vendors either only allow one or two RADIUS servers and those servers must be used for auth/accounting. We really don't want that central accounting server performing auth for everything, thus why we want to proxy it locally to the right instance for the NAS. So can something like that work or do we need to come up with plan B ?

4 8

ippool: not found -> not sending reply
by Volodymyr Litovka 27 Dec '22

27 Dec '22

Hi, I have in 'users' two kinds of users - one with static IP assignments (Framed-IP-Address) and one with ippool. The issues comes with those 'static' users - when accounting stop happens, ippool behaves in the following way: (16) main_pool: EXPAND %{NAS-IP-Address} %{NAS-Port} (16) main_pool: --> xxx.xxx.xx.xx 892625506 (16) main_pool: MD5 on 'key' directive maps to: bc959cb51c2c3d41c93f922f572ee1d9 (16) main_pool: Searching for an entry for key: 'xxx.xxx.xx.xx 892625506' (16) main_pool: Entry not found (16) [main_pool] = notfound (16) } # accounting = notfound *(16) Not sending reply to client.* it _looks_ as it has no consequences except timeouts and resends on NAS side, but I don't like error-like behaviour. So I was able to fix this with the following statement in 'accounting' section (which is responsible for freeing the lease): redundant { main_pool ok } so regardless of main_pool's error, always return ok. But I have a question - while this is not leasing, but freeing of the lease, whether such rough override can impact something else? Whether it's make sense to add more granular control like "if main_pool returns notfound then it's ok" ? And, sorry for this - how it can be written using unlang? Thank you. -- Volodymyr Litovka "Vision without Execution is Hallucination." -- Thomas Edison

2 2

modify NAS-Port in incoming messages
by Volodymyr Litovka 27 Dec '22

27 Dec '22

Hi colleagues, I'm trying to use Freeradius with Strongswan and have an issue with "registering" user sessions. In short, upon IPSec session reconfiguring (to be more precise - IKE_SA rekeying) Strongswan changes NAS-Port attribute and, thus, FreeRadius upon receiving of next Interim-Update with another NAS-Port value, consider it as a new session and create new entry in radutmp db, so finally I have the following (TTY is NAS-Port received from NAS): root@vpn01:/etc/freeradius/3.0# radwho Login Name What TTY When From Location doka doka shell S3 Sun 22:44 xxx.xxx.xx.xx 100.100.2.1 doka doka shell S4 Sun 22:53 xxx.xxx.xx.xx 100.100.2.1 doka doka shell S5 Sun 23:03 xxx.xxx.xx.xx 100.100.2.1 doka doka shell S6 Sun 23:12 xxx.xxx.xx.xx 100.100.2.1 doka doka shell S12 Sun 23:27 xxx.xxx.xx.xx 100.100.2.1 doka doka shell S15 Sun 23:35 xxx.xxx.xx.xx 100.100.2.1 doka doka shell S18 Sun 23:40 xxx.xxx.xx.xx 100.100.2.1 doka doka shell S19 Sun 23:51 xxx.xxx.xx.xx 100.100.2.1 which makes it impossible to use Simultaneous-Use. There is attribute which do not change during IKE_SA rekey - Acct-Session-Id and I'd like to use it instead of Nas-Port to identify this session, but have two issues: - the statement (added to preacct section of 'default' site): update request { NAS-Port = %{integer:%{base64:&Acct-Session-Id}} } gives an error: /etc/freeradius/3.0/sites-enabled/default[610]: Unknown or invalid value "%{integer:%{base64:&Acct-Session-Id}}" for attribute NAS-Port while if using double quotes `... = "%{integer...}"` converts the value improperly: (3) # Executing section preacct from file /etc/freeradius/3.0/sites-enabled/default (3) preacct { (3) [preprocess] = ok (3) update request { *(3) EXPAND %{integer:%{base64:&Acct-Session-Id}}* (3) --> *(3) NAS-Port = 0* (3) } # update request = noop - and nevertheless, in second case accounting records in 'details' file contains the original NAS-Port value: Mon Dec 26 00:17:19 2022 Acct-Status-Type = Interim-Update Acct-Session-Id = "1672007843-24" Class = 0x70667367726f7570 NAS-Port-Type = Virtual Service-Type = Framed-User *NAS-Port = 25* and radutmp continues to expand the list of connections with original NAS-Port value: doka doka shell *S24* Mon 00:14 xxx.xxx.xx.xx 100.100.2.1 doka doka shell *S25* Mon 00:24 xxx.xxx.xx.xx 100.100.2.1 So, there are two questions: - what is correct way to uniquely convert string to integer? - whether it's possible to mangle NAS-Port attribute to achieve what I need? Thank you! Have a nice holidays and happy next year :-) -- Volodymyr Litovka "Vision without Execution is Hallucination." -- Thomas Edison

2 4

radclient test data
by vaiost SSSS 27 Dec '22

27 Dec '22

Hi,I'm using freeradius 3.2.1 just to log Accounting requests (preferably through linelog module) so as to process data later with an external process.The problem is that when stress freeradius using radclient, many requests are not logged both using linelog or detail modules. I believe that there is something wrong with my test data that is stored in a simple file(i.e. acct_test.txt).Thank you in advanceRegards radclient -f acct_test.txt -c 5000 -t 1 -x -p 10 172.19.185.60 acct m2msdp2022|grep Accounting-Response|wc -lTue Dec 27 13:38:11 EET 2022radclient: Received reply to request we did not send. (id=21 socket 4)radclient: Received reply to request we did not send. (id=59 socket 4)5000 acct_test.txtAcct-Status-Type=StopAcct-Session-Id="testing"NAS-IP-Address=10.95.142.77#User-Name=vaiosCalled-Station-Id=306974028024Framed-IP-Address=10.37.236.170Event-Timestamp=1667211238Acct-Session-Id=C110DB4B857B4FB3Service-Type=FramedFramed-Protocol=PPTP3GPP-IMSI=2020109233950123GPP-Charging-ID=2239451059

2 1

sql ldap simultaneous-use
by mcury 23 Dec '22

23 Dec '22

Hi, I'm new to freeradius, currently trying to enforce simultaneous-use = 1 in my wireless network but it is not working. unifi access point > freeradius > samba-ad-dc mysql> SELECT COUNT(*) FROM radacct WHERE username = 'vanessa' AND acctstoptime IS NULL; +----------+ | COUNT(*) | +----------+ | 2 | +----------+ 1 row in set (0.00 sec) I'm using LDAP for authentication through post-auth section in sites-available/default file using Unlang and its working perfectly. (11) if (LDAP-Group == "wifi_users" && NAS-IP-Address == "172.16.200.3") -> TRUE (11) if (LDAP-Group == "wifi_users" && NAS-IP-Address == "172.16.200.3") { (11) update { (11) control:Simultaneous-Use := 1 (11) reply:Class := 0x776966695f7573657273 (11) } # update = noop (11) [noop] = noop (11) } # if (LDAP-Group == "wifi_users" && NAS-IP-Address == "172.16.200.3") = noop (11) ... skipping elsif: Preceding "if" was taken (11) } # post-auth = ok (11) Sent Access-Accept Id 77 from 192.168.255.241:1812 to 172.16.200.3:38173 length 187 LDAP attribute map as per below: mods-available/ldap: update { ... control:Simultaneous-Use += 'radiusSimultaneousUse = 1' sql is included inside session { section as per documentation. Any tips, perhaps I forgot something? Thanks in advance

2 2

certificate expired with PEAP/MSCHAPv2/Android 11 in WiFi
by Olivier 20 Dec '22

20 Dec '22

Hello, For some times now, Android 11 requires cert validation in WiFi connections (see [1]). At the same time, Android 11 also makes it much harder for end users to import self-signed root CA (see [2]). As I provide WiFi connectivity in BYOD environments and can't help end users when they import certs, I choosed to test PEAP/MSCHAPv2 with LetsEncrypt certs though I know this would be less secure than with self-signed root CA. I'm planning to generate and renew LetsEncrypt cert on a remote Internet-connected host, and then copy both privkey.pem and fullchain.pem files to Freeradius instance, as suggested by [3]. In my lab setup, I'm using a Samsung Galaxy Tab A7 Lite to test. Though being Android 11-powered, this device also allows Do-Not-Validate pre-Android 11 option ! When I connect to WiFi with this device, I'm using the following settings: Identity: bar Password: whateverneeded CA Certificate: use system certificate Online cert status: do not validate Domain: the exact CN value My lab setup includes: - a Freeradius 3.0.21 on Debian Bullseye - a Unifi WiFi Network 6.5.55 with WiFi AP - a Samsung Galaxy Tab A7 Lite - valid LetsEncrypt certs My certs files are copied into Freeradius host as: # ls -l /etc/freeradius/3.0/certs/letsencrypt/ total 12 -rw-r----- 1 freerad freerad 5604 27 juin 19:04 fullchain.pem -rw------- 1 freerad freerad 1704 27 juin 19:04 privkey.pem # openssl x509 -dates -noout -in /etc/freeradius/3.0/certs/letsencrypt/fullchain.pem notBefore=May 28 17:32:21 2022 GMT notAfter=Aug 26 17:32:20 2022 GMT [1] https://internet-access-guide.com/android-wifi-ca-certificate-do-not-valida… [2] https://httptoolkit.tech/blog/android-11-trust-ca-certificates/ [3] https://framebyframewifi.net/2017/01/29/use-lets-encrypt-certificates-with-… When I connect to WiFi, this is part of freeradius -X output: # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } ... rlm_mschap (mschap): using internal authentication # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/freeradius/3.0/certs/letsencrypt/privkey.pem" certificate_file = "/etc/freeradius/3.0/certs/letsencrypt/fullchain.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" disable_tlsv1 = yes disable_tlsv1_1 = yes tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } Please use tls_min_version and tls_max_version instead of disable_tlsv1 Please use tls_min_version and tls_max_version instead of disable_tlsv1_2 # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:336 } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 56401 Listening on proxy address :: port 45775 Ready to process requests (26) eap: Peer sent EAP Response (code 2) ID 1 length 141 (26) eap: Continuing tunnel setup (26) [eap] = ok (26) } # authorize = ok (26) Found Auth-Type = eap (26) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (26) authenticate { (26) eap: Expiring EAP session with state 0xc733062dc6321fce (26) eap: Finished EAP session with state 0xc733062dc6321fce (26) eap: Previous EAP request found for state 0xc733062dc6321fce, released from the list (26) eap: Peer sent packet with method EAP PEAP (25) (26) eap: Calling submodule eap_peap to process data (26) eap_peap: Continuing EAP-TLS (26) eap_peap: Peer indicated complete TLS record size will be 131 bytes (26) eap_peap: Got complete TLS record (131 bytes) (26) eap_peap: [eaptls verify] = length included (26) eap_peap: (other): before SSL initialization (26) eap_peap: TLS_accept: before SSL initialization (26) eap_peap: TLS_accept: before SSL initialization (26) eap_peap: <<< recv TLS 1.3 [length 007e] (26) eap_peap: TLS_accept: SSLv3/TLS read client hello (26) eap_peap: >>> send TLS 1.2 [length 003d] (26) eap_peap: TLS_accept: SSLv3/TLS write server hello (26) eap_peap: >>> send TLS 1.2 [length 0fbe] (26) eap_peap: TLS_accept: SSLv3/TLS write certificate (26) eap_peap: >>> send TLS 1.2 [length 014d] (26) eap_peap: TLS_accept: SSLv3/TLS write key exchange (26) eap_peap: >>> send TLS 1.2 [length 0004] (26) eap_peap: TLS_accept: SSLv3/TLS write server done (26) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (26) eap_peap: TLS - In Handshake Phase (26) eap_peap: TLS - got 4448 bytes of data (26) eap_peap: [eaptls process] = handled (26) eap: Sending EAP Request (code 1) ID 2 length 1004 (26) eap: EAP session adding &reply:State = 0xc733062dc5311fce (26) [eap] = handled (26) } # authenticate = handled (26) Using Post-Auth-Type Challenge (26) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (26) Challenge { ... } # empty sub-section is ignored (26) Sent Access-Challenge Id 43 from 192.168.1.244:1812 to 192.168.1.50:58452 length 0 (26) EAP-Message = 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 (26) Message-Authenticator = 0x00000000000000000000000000000000 (26) State = 0xc733062dc5311fceda200d98107c2728 (26) Finished request Waking up in 4.9 seconds. (27) Received Access-Request Id 44 from 192.168.1.50:58452 to 192.168.1.244:1812 length 231 (27) User-Name = "bar" (27) NAS-IP-Address = 192.168.1.50 (27) NAS-Identifier = "f09fc2f50d43" (27) Called-Station-Id = "F0-9F-C2-F5-0D-43:MyCompany" (27) NAS-Port-Type = Wireless-802.11 (27) Service-Type = Framed-User (27) Calling-Station-Id = "2E-9A-17-FA-78-FA" (27) Connect-Info = "CONNECT 0Mbps 802.11b" (27) Acct-Session-Id = "2087B41CCAAC0F74" (27) Acct-Multi-Session-Id = "C546EF77BB09F037" (27) WLAN-Pairwise-Cipher = 1027076 (27) WLAN-Group-Cipher = 1027076 (27) WLAN-AKM-Suite = 1027073 (27) Framed-MTU = 1400 (27) EAP-Message = 0x020200061900 (27) State = 0xc733062dc5311fceda200d98107c2728 (27) Message-Authenticator = 0x39f4e95b5909f1152843a2e02fbaffde (27) session-state: No cached attributes (27) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (27) authorize { (27) policy filter_username { (27) if (&User-Name) { (27) if (&User-Name) -> TRUE (27) if (&User-Name) { (27) if (&User-Name =~ / /) { (27) if (&User-Name =~ / /) -> FALSE (27) if (&User-Name =~ /@[^@]*@/ ) { (27) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (27) if (&User-Name =~ /\.\./ ) { (27) if (&User-Name =~ /\.\./ ) -> FALSE (27) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (27) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (27) if (&User-Name =~ /\.$/) { (27) if (&User-Name =~ /\.$/) -> FALSE (27) if (&User-Name =~ /(a)\./) { (27) if (&User-Name =~ /(a)\./) -> FALSE (27) } # if (&User-Name) = notfound (27) } # policy filter_username = notfound (27) [preprocess] = ok (27) [chap] = noop (27) [mschap] = noop (27) [digest] = noop (27) suffix: Checking for suffix after "@" (27) suffix: No '@' in User-Name = "bar", looking up realm NULL (27) suffix: No such realm "NULL" (27) [suffix] = noop (27) eap: Peer sent EAP Response (code 2) ID 2 length 6 (27) eap: Continuing tunnel setup (27) [eap] = ok (27) } # authorize = ok (27) Found Auth-Type = eap (27) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (27) authenticate { (27) eap: Expiring EAP session with state 0xc733062dc5311fce (27) eap: Finished EAP session with state 0xc733062dc5311fce (27) eap: Previous EAP request found for state 0xc733062dc5311fce, released from the list (27) eap: Peer sent packet with method EAP PEAP (25) (27) eap: Calling submodule eap_peap to process data (27) eap_peap: Continuing EAP-TLS (27) eap_peap: Peer ACKed our handshake fragment (27) eap_peap: [eaptls verify] = request (27) eap_peap: [eaptls process] = handled (27) eap: Sending EAP Request (code 1) ID 3 length 1000 (27) eap: EAP session adding &reply:State = 0xc733062dc4301fce (27) [eap] = handled (27) } # authenticate = handled (27) Using Post-Auth-Type Challenge (27) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (27) Challenge { ... } # empty sub-section is ignored (27) Sent Access-Challenge Id 44 from 192.168.1.244:1812 to 192.168.1.50:58452 length 0 (27) EAP-Message = 0x010303e81940cca15e2a9dd6bfa61b4d866fdcc7284c9a6a860076002979bef09e393921f056739f63a577e5be577d9c600af8f94d5d265c255dc784000001810bf0d4030000040300473045022037d7b0385f16f2b16e8903082d51bb15604c0262cd7473239d165e5ca5a858740221009c92c932de42f9d7883a89cd8ddc171d91a0f5b0d2e77b6886d1ea473f7fbe17300d06092a864886f70d01010b05000382010100731334fe1bbdc145631a0ddd0e7174e87df1da2cf6b032521bba82995c0460886e5b751c5f0b417ad32fa987caac9f61be48ec68673e33bc5a1deebe1004c5546cb3ef098495ab393bd60c614e132ad13e5fe0ca56106aeb92cf1f4e6de2f8f736bc1e94b7659439b711b931ba2174abb85ef05347b7d82f18411fe147f74939fbe311977c50c90b7c7720e890b59300fef66c0c7b84cd536cbde1aee6231f21550751613cba3ad52f48c82b2cc0de8e38764ba3c988a8cd37994500c1233288e294319b95c4600a48b3094eadf3ac1d68bf (27) Message-Authenticator = 0x00000000000000000000000000000000 (27) State = 0xc733062dc4301fceda200d98107c2728 (27) Finished request Waking up in 4.9 seconds. (28) Received Access-Request Id 45 from 192.168.1.50:58452 to 192.168.1.244:1812 length 231 (28) User-Name = "bar" (28) NAS-IP-Address = 192.168.1.50 (28) NAS-Identifier = "f09fc2f50d43" (28) Called-Station-Id = "F0-9F-C2-F5-0D-43:MyCompany" (28) NAS-Port-Type = Wireless-802.11 (28) Service-Type = Framed-User (28) Calling-Station-Id = "2E-9A-17-FA-78-FA" (28) Connect-Info = "CONNECT 0Mbps 802.11b" (28) Acct-Session-Id = "2087B41CCAAC0F74" (28) Acct-Multi-Session-Id = "C546EF77BB09F037" (28) WLAN-Pairwise-Cipher = 1027076 (28) WLAN-Group-Cipher = 1027076 (28) WLAN-AKM-Suite = 1027073 (28) Framed-MTU = 1400 (28) EAP-Message = 0x020300061900 (28) State = 0xc733062dc4301fceda200d98107c2728 (28) Message-Authenticator = 0x441e1d2d2df0e955fe4065c44cb93a6b (28) session-state: No cached attributes (28) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (28) authorize { (28) policy filter_username { (28) if (&User-Name) { (28) if (&User-Name) -> TRUE (28) if (&User-Name) { (28) if (&User-Name =~ / /) { (28) if (&User-Name =~ / /) -> FALSE (28) if (&User-Name =~ /@[^@]*@/ ) { (28) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (28) if (&User-Name =~ /\.\./ ) { (28) if (&User-Name =~ /\.\./ ) -> FALSE (28) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (28) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (28) if (&User-Name =~ /\.$/) { (28) if (&User-Name =~ /\.$/) -> FALSE (28) if (&User-Name =~ /(a)\./) { (28) if (&User-Name =~ /(a)\./) -> FALSE (28) } # if (&User-Name) = notfound (28) } # policy filter_username = notfound (28) [preprocess] = ok (28) [chap] = noop (28) [mschap] = noop (28) [digest] = noop (28) suffix: Checking for suffix after "@" (28) suffix: No '@' in User-Name = "bar", looking up realm NULL (28) suffix: No such realm "NULL" (28) [suffix] = noop (28) eap: Peer sent EAP Response (code 2) ID 3 length 6 (28) eap: Continuing tunnel setup (28) [eap] = ok (28) } # authorize = ok (28) Found Auth-Type = eap (28) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (28) authenticate { (28) eap: Expiring EAP session with state 0xc733062dc4301fce (28) eap: Finished EAP session with state 0xc733062dc4301fce (28) eap: Previous EAP request found for state 0xc733062dc4301fce, released from the list (28) eap: Peer sent packet with method EAP PEAP (25) (28) eap: Calling submodule eap_peap to process data (28) eap_peap: Continuing EAP-TLS (28) eap_peap: Peer ACKed our handshake fragment (28) eap_peap: [eaptls verify] = request (28) eap_peap: [eaptls process] = handled (28) eap: Sending EAP Request (code 1) ID 4 length 1000 (28) eap: EAP session adding &reply:State = 0xc733062dc3371fce (28) [eap] = handled (28) } # authenticate = handled (28) Using Post-Auth-Type Challenge (28) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (28) Challenge { ... } # empty sub-section is ignored (28) Sent Access-Challenge Id 45 from 192.168.1.244:1812 to 192.168.1.50:58452 length 0 (28) EAP-Message = 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 (28) Message-Authenticator = 0x00000000000000000000000000000000 (28) State = 0xc733062dc3371fceda200d98107c2728 (28) Finished request Waking up in 4.9 seconds. (29) Received Access-Request Id 46 from 192.168.1.50:58452 to 192.168.1.244:1812 length 231 (29) User-Name = "bar" (29) NAS-IP-Address = 192.168.1.50 (29) NAS-Identifier = "f09fc2f50d43" (29) Called-Station-Id = "F0-9F-C2-F5-0D-43:MyCompany" (29) NAS-Port-Type = Wireless-802.11 (29) Service-Type = Framed-User (29) Calling-Station-Id = "2E-9A-17-FA-78-FA" (29) Connect-Info = "CONNECT 0Mbps 802.11b" (29) Acct-Session-Id = "2087B41CCAAC0F74" (29) Acct-Multi-Session-Id = "C546EF77BB09F037" (29) WLAN-Pairwise-Cipher = 1027076 (29) WLAN-Group-Cipher = 1027076 (29) WLAN-AKM-Suite = 1027073 (29) Framed-MTU = 1400 (29) EAP-Message = 0x020400061900 (29) State = 0xc733062dc3371fceda200d98107c2728 (29) Message-Authenticator = 0x662064b545b5aa385ea1ebd63c5d881b (29) session-state: No cached attributes (29) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (29) authorize { (29) policy filter_username { (29) if (&User-Name) { (29) if (&User-Name) -> TRUE (29) if (&User-Name) { (29) if (&User-Name =~ / /) { (29) if (&User-Name =~ / /) -> FALSE (29) if (&User-Name =~ /@[^@]*@/ ) { (29) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (29) if (&User-Name =~ /\.\./ ) { (29) if (&User-Name =~ /\.\./ ) -> FALSE (29) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (29) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (29) if (&User-Name =~ /\.$/) { (29) if (&User-Name =~ /\.$/) -> FALSE (29) if (&User-Name =~ /(a)\./) { (29) if (&User-Name =~ /(a)\./) -> FALSE (29) } # if (&User-Name) = notfound (29) } # policy filter_username = notfound (29) [preprocess] = ok (29) [chap] = noop (29) [mschap] = noop (29) [digest] = noop (29) suffix: Checking for suffix after "@" (29) suffix: No '@' in User-Name = "bar", looking up realm NULL (29) suffix: No such realm "NULL" (29) [suffix] = noop (29) eap: Peer sent EAP Response (code 2) ID 4 length 6 (29) eap: Continuing tunnel setup (29) [eap] = ok (29) } # authorize = ok (29) Found Auth-Type = eap (29) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (29) authenticate { (29) eap: Expiring EAP session with state 0xc733062dc3371fce (29) eap: Finished EAP session with state 0xc733062dc3371fce (29) eap: Previous EAP request found for state 0xc733062dc3371fce, released from the list (29) eap: Peer sent packet with method EAP PEAP (25) (29) eap: Calling submodule eap_peap to process data (29) eap_peap: Continuing EAP-TLS (29) eap_peap: Peer ACKed our handshake fragment (29) eap_peap: [eaptls verify] = request (29) eap_peap: [eaptls process] = handled (29) eap: Sending EAP Request (code 1) ID 5 length 1000 (29) eap: EAP session adding &reply:State = 0xc733062dc2361fce (29) [eap] = handled (29) } # authenticate = handled (29) Using Post-Auth-Type Challenge (29) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (29) Challenge { ... } # empty sub-section is ignored (29) Sent Access-Challenge Id 46 from 192.168.1.244:1812 to 192.168.1.50:58452 length 0 (29) EAP-Message = 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 (29) Message-Authenticator = 0x00000000000000000000000000000000 (29) State = 0xc733062dc2361fceda200d98107c2728 (29) Finished request Waking up in 4.8 seconds. (30) Received Access-Request Id 47 from 192.168.1.50:58452 to 192.168.1.244:1812 length 231 (30) User-Name = "bar" (30) NAS-IP-Address = 192.168.1.50 (30) NAS-Identifier = "f09fc2f50d43" (30) Called-Station-Id = "F0-9F-C2-F5-0D-43:MyCompany" (30) NAS-Port-Type = Wireless-802.11 (30) Service-Type = Framed-User (30) Calling-Station-Id = "2E-9A-17-FA-78-FA" (30) Connect-Info = "CONNECT 0Mbps 802.11b" (30) Acct-Session-Id = "2087B41CCAAC0F74" (30) Acct-Multi-Session-Id = "C546EF77BB09F037" (30) WLAN-Pairwise-Cipher = 1027076 (30) WLAN-Group-Cipher = 1027076 (30) WLAN-AKM-Suite = 1027073 (30) Framed-MTU = 1400 (30) EAP-Message = 0x020500061900 (30) State = 0xc733062dc2361fceda200d98107c2728 (30) Message-Authenticator = 0xdb1a11eda65bfd28f2bae8a4467c4bea (30) session-state: No cached attributes (30) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (30) authorize { (30) policy filter_username { (30) if (&User-Name) { (30) if (&User-Name) -> TRUE (30) if (&User-Name) { (30) if (&User-Name =~ / /) { (30) if (&User-Name =~ / /) -> FALSE (30) if (&User-Name =~ /@[^@]*@/ ) { (30) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (30) if (&User-Name =~ /\.\./ ) { (30) if (&User-Name =~ /\.\./ ) -> FALSE (30) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (30) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (30) if (&User-Name =~ /\.$/) { (30) if (&User-Name =~ /\.$/) -> FALSE (30) if (&User-Name =~ /(a)\./) { (30) if (&User-Name =~ /(a)\./) -> FALSE (30) } # if (&User-Name) = notfound (30) } # policy filter_username = notfound (30) [preprocess] = ok (30) [chap] = noop (30) [mschap] = noop (30) [digest] = noop (30) suffix: Checking for suffix after "@" (30) suffix: No '@' in User-Name = "bar", looking up realm NULL (30) suffix: No such realm "NULL" (30) [suffix] = noop (30) eap: Peer sent EAP Response (code 2) ID 5 length 6 (30) eap: Continuing tunnel setup (30) [eap] = ok (30) } # authorize = ok (30) Found Auth-Type = eap (30) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (30) authenticate { (30) eap: Expiring EAP session with state 0xc733062dc2361fce (30) eap: Finished EAP session with state 0xc733062dc2361fce (30) eap: Previous EAP request found for state 0xc733062dc2361fce, released from the list (30) eap: Peer sent packet with method EAP PEAP (25) (30) eap: Calling submodule eap_peap to process data (30) eap_peap: Continuing EAP-TLS (30) eap_peap: Peer ACKed our handshake fragment (30) eap_peap: [eaptls verify] = request (30) eap_peap: [eaptls process] = handled (30) eap: Sending EAP Request (code 1) ID 6 length 478 (30) eap: EAP session adding &reply:State = 0xc733062dc1351fce (30) [eap] = handled (30) } # authenticate = handled (30) Using Post-Auth-Type Challenge (30) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (30) Challenge { ... } # empty sub-section is ignored (30) Sent Access-Challenge Id 47 from 192.168.1.244:1812 to 192.168.1.50:58452 length 0 (30) EAP-Message = 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 (30) Message-Authenticator = 0x00000000000000000000000000000000 (30) State = 0xc733062dc1351fceda200d98107c2728 (30) Finished request Waking up in 4.8 seconds. (31) Received Access-Request Id 48 from 192.168.1.50:58452 to 192.168.1.244:1812 length 242 (31) User-Name = "bar" (31) NAS-IP-Address = 192.168.1.50 (31) NAS-Identifier = "f09fc2f50d43" (31) Called-Station-Id = "F0-9F-C2-F5-0D-43:MyCompany" (31) NAS-Port-Type = Wireless-802.11 (31) Service-Type = Framed-User (31) Calling-Station-Id = "2E-9A-17-FA-78-FA" (31) Connect-Info = "CONNECT 0Mbps 802.11b" (31) Acct-Session-Id = "2087B41CCAAC0F74" (31) Acct-Multi-Session-Id = "C546EF77BB09F037" (31) WLAN-Pairwise-Cipher = 1027076 (31) WLAN-Group-Cipher = 1027076 (31) WLAN-AKM-Suite = 1027073 (31) Framed-MTU = 1400 (31) EAP-Message = 0x020600111980000000071503030002022d (31) State = 0xc733062dc1351fceda200d98107c2728 (31) Message-Authenticator = 0x96fa48935246587652cd6219e8243639 (31) session-state: No cached attributes (31) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (31) authorize { (31) policy filter_username { (31) if (&User-Name) { (31) if (&User-Name) -> TRUE (31) if (&User-Name) { (31) if (&User-Name =~ / /) { (31) if (&User-Name =~ / /) -> FALSE (31) if (&User-Name =~ /@[^@]*@/ ) { (31) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (31) if (&User-Name =~ /\.\./ ) { (31) if (&User-Name =~ /\.\./ ) -> FALSE (31) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (31) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (31) if (&User-Name =~ /\.$/) { (31) if (&User-Name =~ /\.$/) -> FALSE (31) if (&User-Name =~ /(a)\./) { (31) if (&User-Name =~ /(a)\./) -> FALSE (31) } # if (&User-Name) = notfound (31) } # policy filter_username = notfound (31) [preprocess] = ok (31) [chap] = noop (31) [mschap] = noop (31) [digest] = noop (31) suffix: Checking for suffix after "@" (31) suffix: No '@' in User-Name = "bar", looking up realm NULL (31) suffix: No such realm "NULL" (31) [suffix] = noop (31) eap: Peer sent EAP Response (code 2) ID 6 length 17 (31) eap: Continuing tunnel setup (31) [eap] = ok (31) } # authorize = ok (31) Found Auth-Type = eap (31) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (31) authenticate { (31) eap: Expiring EAP session with state 0xc733062dc1351fce (31) eap: Finished EAP session with state 0xc733062dc1351fce (31) eap: Previous EAP request found for state 0xc733062dc1351fce, released from the list (31) eap: Peer sent packet with method EAP PEAP (25) (31) eap: Calling submodule eap_peap to process data (31) eap_peap: Continuing EAP-TLS (31) eap_peap: Peer indicated complete TLS record size will be 7 bytes (31) eap_peap: Got complete TLS record (7 bytes) (31) eap_peap: [eaptls verify] = length included (31) eap_peap: <<< recv TLS 1.2 [length 0002] (31) eap_peap: ERROR: TLS Alert read:fatal:certificate expired (31) eap_peap: TLS_accept: Need to read more data: error (31) eap_peap: ERROR: Failed in __FUNCTION__ (SSL_read): error:14094415:SSL routines:ssl3_read_bytes:sslv3 alert certificate expired (31) eap_peap: TLS - In Handshake Phase (31) eap_peap: TLS - Application data. (31) eap_peap: ERROR: TLS failed during operation (31) eap_peap: ERROR: [eaptls process] = fail (31) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (31) eap: Sending EAP Failure (code 4) ID 6 length 4 (31) eap: Failed in EAP select (31) [eap] = invalid (31) } # authenticate = invalid (31) Failed to authenticate the user (31) Using Post-Auth-Type Reject (31) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (31) Post-Auth-Type REJECT { (31) attr_filter.access_reject: EXPAND %{User-Name} (31) attr_filter.access_reject: --> bar (31) attr_filter.access_reject: Matched entry DEFAULT at line 11 (31) [attr_filter.access_reject] = updated (31) [eap] = noop (31) policy remove_reply_message_if_eap { (31) if (&reply:EAP-Message && &reply:Reply-Message) { (31) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (31) else { (31) [noop] = noop (31) } # else = noop (31) } # policy remove_reply_message_if_eap = noop (31) } # Post-Auth-Type REJECT = updated (31) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (31) Sending delayed response (31) Sent Access-Reject Id 48 from 192.168.1.244:1812 to 192.168.1.50:58452 length 44 (31) EAP-Message = 0x04060004 (31) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.8 seconds. (24) Cleaning up request packet ID 41 with timestamp +308 How can I correct this ? Best regards

3 5

oauth2 or oidc module for FreeRADIUS
by Việt Đức Trần 20 Dec '22

20 Dec '22

Hi Everyone! I am using FreeRADIUS version 3.2.1 installed on Ubuntu server 22.04 and I need to make a connection from my FreeRADIUS server to an external authentication server by using OAuth2 or OpenID Connect protocol. But I cannot find any available FreeRADIUS modules for OAuth2 or OpenID Connect. If these modules currently don't exist or do not support FreeRADIUS 3.2.1, how can I make the connection from my FreeRADIUS server to external authentication server via OAuth2/OIDC protocol? Thank you so much for your help./

2 2

freeradius 4.0 rlm_kafka
by vaiost SSSS 19 Dec '22

19 Dec '22

Hi,I am experimenting with freeradius 4.0 and it will be great if you share some more info on how we use rlm_kafka functionality so as to send accounting requests using a producer to a kafka server.Thank you in adnvanceRegards

2 1

TLS 1.3 Configuration
by Boby Tharappel 16 Dec '22

16 Dec '22

Hi all, I'm trying to do an EAP TLS connection with TLS 1.3 Device is running wpa_supplicant V 2.10 and openssl 1.1.1q. Server is running Freeradius 3.2.1, openssl 1.1.1f on Ubuntu 20.04. I have set min and max tls version to 1.3 in mods-enabled/eap. I'm running into the following error: (9) Received Access-Request Id 249 from 192.168.0.1:35335 to 192.168.0.109:1812 length 336 (9) User-Name = "babycam" (9) NAS-IP-Address = 192.168.0.1 (9) NAS-Identifier = "RalinkAP0" (9) NAS-Port = 0 (9) Called-Station-Id = "AC-84-C6-60-76-8E" (9) Calling-Station-Id = "08-FB-EA-CF-70-C2" (9) Framed-MTU = 1400 (9) NAS-Port-Type = Wireless-802.11 (9) EAP-Message = 0x020200c40d0016030100b9010000b50303470176dc576b264b7154e9bfedb49482d8ec94cb131322a2700ad8115cf99678000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff01000054000b000403000102000a000c000a001d0017001e001900180016000000170000000d0030002e040305030603080708080809080a080b080408050806040105010601030302030301020103020202040205020602 (9) State = 0xa6ed9180a6ef9cf4c53afbdf101f92ad (9) Message-Authenticator = 0x17fafa7bdf53feccf5af9f4e6411bf3d (9) Restoring &session-state (9) &session-state:Framed-MTU = 994 (9) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "babycam", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 2 length 196 (9) eap: No EAP Start, assuming it's an on-going EAP conversation (9) [eap] = updated (9) files: users: Matched entry babycam at line 1 (9) [files] = ok (9) [expiration] = noop (9) [logintime] = noop (9) pap: WARNING: Auth-Type already set. Not setting to PAP (9) [pap] = noop (9) } # authorize = updated (9) Found Auth-Type = eap (9) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0xa6ed9180a6ef9cf4 (9) eap: Finished EAP session with state 0xa6ed9180a6ef9cf4 (9) eap: Previous EAP request found for state 0xa6ed9180a6ef9cf4, released from the list (9) eap: Peer sent packet with method EAP TLS (13) (9) eap: Calling submodule eap_tls to process data (9) eap_tls: (TLS) EAP Got final fragment (190 bytes) (9) eap_tls: WARNING: (TLS) EAP Total received record fragments (190 bytes), does not equal expected expected data length (0 bytes) (9) eap_tls: (TLS) EAP Done initial handshake (9) eap_tls: (TLS) Handshake state - before SSL initialization (9) eap_tls: (TLS) Handshake state - Server before SSL initialization (9) eap_tls: (TLS) Handshake state - Server before SSL initialization (9) eap_tls: (TLS) recv TLS 1.3 Handshake, ClientHello (9) eap_tls: (TLS) send TLS 1.2 Alert, fatal protocol_version (9) eap_tls: ERROR: (TLS) Alert write:fatal:protocol version (9) eap_tls: ERROR: (TLS) Server : Error in error (9) eap_tls: ERROR: (TLS) Failed reading from OpenSSL: error:14209102:SSL routines:tls_early_post_process_client_hello:unsupported protocol (9) eap_tls: ERROR: (TLS) System call (I/O) error (-1) (9) eap_tls: ERROR: (TLS) EAP Receive handshake failed during operation (9) eap_tls: ERROR: [eaptls process] = fail (9) eap: ERROR: Failed continuing EAP TLS (13) session. EAP sub-module failed (9) eap: Sending EAP Failure (code 4) ID 2 length 4 (9) eap: Failed in EAP select (9) [eap] = invalid (9) } # authenticate = invalid (9) Failed to authenticate the user (9) Using Post-Auth-Type Reject (9) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (9) Post-Auth-Type REJECT { (9) attr_filter.access_reject: EXPAND %{User-Name} (9) attr_filter.access_reject: --> babycam (9) attr_filter.access_reject: Matched entry DEFAULT at line 11 (9) [attr_filter.access_reject] = updated (9) [eap] = noop (9) policy remove_reply_message_if_eap { (9) if (&reply:EAP-Message && &reply:Reply-Message) { (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (9) else { (9) [noop] = noop (9) } # else = noop (9) } # policy remove_reply_message_if_eap = noop (9) } # Post-Auth-Type REJECT = updated (9) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (9) (9) Discarding duplicate request from client masutest port 35335 - ID: 249 due to delayed response (9) Sending delayed response (9) Sent Access-Reject Id 249 from 192.168.0.109:1812 to 192.168.0.1:35335 length 44 (9) EAP-Message = 0x04020004 (9) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. Please assist me with this. Boby Tharappel

3 7

Access-Reject message to SQL
by Steven Walters 13 Dec '22

13 Dec '22

Hi I have enabled SQL under post-auth to send access reject records to a db. Below is the query in queries.conf. Currently it only indicates the packet type but I would like to add the same message written to the radius.log file e.g "Login incorrect (pap: MD5 digest does not match "known good" digest)" to the database. query = "\ INSERT INTO ${..postauth_table} \ (username, reply, authdate) \ VALUES(\ '%{User-Name}', \ '%{reply:Packet-Type}', \ NOW())" Regards Steven

2 1

Acct-Status-Type = Stop
by mohamed almeshal 13 Dec '22

13 Dec '22

I'm struggling with UBNT NAS , But I found a Soultion but I need your confirmation about the code , the solution is simply to code a code that tell the every time UBNT cloud Key close the session the radius response to send disconnect this sesiion by id I tested it manualyy and it's work perfect , now the code for radius is : accounting { if(Acct-Status-Type == Stop){ fire the code here } } is that code is accurate or not please advice

2 1

replay
by mohamed almeshal 11 Dec '22

11 Dec '22

the problem Alan is simply that NAS is UBNT and it's behavior is not predicted , it's close the session even when I set session-timeout so this solution is shortcut to that

2 1

reset sql counter every time user logged in
by mohamed almeshal 11 Dec '22

11 Dec '22

dear Savers I'm in middle of missy code , I need to expire the session every time the user is logged in , I do all my best but I found that best way is to set max-all-session for the session and that will exipre the session every time and regenerate new session id , now my question is how to reset the sql counter every time the user is logged in sqlcounter sql_session_timeout_never { sql_module_instance = sql counter_name = Max-All-Session-Time check_name = Max-All-Session reply_name = Session-Timeout key = User-Name reset = never query = "\ SELECT IFNULL(SUM(AcctSessionTime),0) \ FROM radacct \ WHERE UserName='%{${key}}'" } I must set reset = ? thanks , all

2 1

Unable to start radiusd, permission issues, and minimal configuration
by James Prestwood 02 Dec '22

02 Dec '22

Hi, First off I'm having some problems starting radiusd. I first installed the Fedora package then followed the HOWTO[1]: sudo dnf install freeradius Edit /etc/raddb/users adding a 'testing' user radiusd -X Running as a regular user I get some permission errors since it needs files in /etc but neither sudo nor logging in as root allow me to run it either. Its still got permission issues with server.pem tls: Failed reading certificate file "/etc/raddb/certs/server.pem" tls: error:0200100D:system library:fopen:Permission denied tls: error:20074002:BIO routines:file_ctrl:system lib tls: error:140DC002:SSL routines:use_certificate_chain_file:system lib rlm_eap_tls: Failed initializing SSL context rlm_eap (EAP): Failed to initialise rlm_eap_tls /etc/raddb/mods-enabled/eap[14]: Instantiation failed for module "eap" I've also got some additional questions as to how difficult it would be to strip down the configuration, hopefully to a few files? I'm trying to add freeradius to our automated testing framework for wifi, which currently uses hostapd's internal radius server for all EAP tests which is basically two config files. The problem is its not testing against a RADIUS server that you would encounter in real life, like freeradius. So I would like to test against freeradius as well and hopefully catch any subtle differences between the two implementations. The framework runs on a minimal kernel VM and all daemon configurations are held in our upstream project (e.g. dbus, dhcpd, radvd, hostapd etc.). The freeradius config is an entire folder structure with many config files so duplicating that upstream isn't really desired. I've seen "don't modify the config" everywhere, but that aside, is a minimal configuration possible? we only need EAP. Regarldess I'd like to get radiusd running in the first place to test, then I can start the sacrilege of modifying the configuration :) [1] https://wiki.freeradius.org/guide/Basic-configuration-HOWTO

3 5

UBNT Freeradius Support
by mohamed almeshal 01 Dec '22

01 Dec '22

Hi savers ... I'm using UBNT Cloud key Gen 2 , it's work fine with some attributes but I'm looking for complete list of attributes that UBNT support . is this list available or not please advice .

2 1