January 2023 - Freeradius-Users - lists.freeradius.org

Authenticate to AD but only allow certain group
by Brian C. Huffman 16 Aug '25

16 Aug '25

All, I've got authentication working nicely with MSCHAP, but now I'd like to only allow users that are members of a certain AD group. I would prefer to have this happen only when requests come from a specific client (wireless access point). In this case the idea is to have users only be able to get wireless access when they're in a specific AD group. How can I do this in freeradius? Thanks, Brian

7 18

Monitor the number of open EAP sessions
by Sergey Marochkin 23 Nov '23

23 Nov '23

Hi everyone! I am facing a problem when freeradius reports that the limit of open sessions has been reached. These are log entries, like "Too many open sessions. Try increasing "max_sessions" in the EAP module configuration". During the debugging, it was determined that some ios devices (ipad/iphone), for a reason unknown to me, cyclically cannot complete eap/tls authentication process. I found that these devices successfully start communicating with the NAS (send EAP-Response/Identity). But after receiving the (TLS Start)-message, they no longer send the (TLS client_hello)-message, and restart the association process with the access point and therefore open a new EAP session. If recreate a wifi connection on such a device, it will connect successfully. Until I find the root cause of this behavior, I would like to monitor the number of open sessions of the radius server. But I couldn't find a suitable way to do it. Here is what I tried: - use the "status server" tool, but there is no suitable one among its counters - use tool "control-socket" and radmin but also i didn't find suitable counter Can you help me with this question? Thanks!

2 4

IKEv2 VPN clients and 2FA
by Markus Winkler 22 Mar '23

22 Mar '23

Hi all, I hope I may ask you regarding this topic. I have a test setup of OPNsense firewall, FreeRADIUS 3.2.0 and using Linux, Mac and especially Windows 10 (with the native Windows client) IKEv2 VPN clients. OPNsense / Phase 1 is configured to use EAP-RADIUS (i.e. FreeRADIUS) which is authenticating the VPN users against Active Directory. The VPN clients are using IKEv2 and EAP-MSCHAPv2 with (AD-) username and password. I use winbind for authentication (https://wiki.freeradius.org/guide/Active-Directory-direct-via-winbind) and do an additional check if the user is member of a special AD group (via LDAP). These are the key points. And so far it's working fine. But: I have the demand to use 2FA (especially OTP) to increase the security of the VPN access. And that's my very question: I searched around, read tons of articles etc. if that's possible and if yes, what would be the best way to achive this goal. Among others I found this: https://wiki.freeradius.org/guide/2FA-Active-Directory-plus-Proxy and would like to ask if someone has such an environment with Windows 10 clients and used it with e.g. privacyIDEA, OpenOTP or similar systems (other than the mentioned Gemalto Safenet Authentication Services)? It would be the best if the OTP system is running on-prem. Could this work and is it worth the effort to setup such a system? Any feedback is highly appreciated. Thank you and best regards, Markus

4 5

Freeradius Google Secure LDAP EAP-GTC issues
by Henning Kessler 14 Feb '23

14 Feb '23

Hello, I followed this tutorial (https://www.nasirhafeez.com/wp-comments-post.php) for testing purposes several times and it worked flawlessly. several month later I wanted to put it in production and it stop working. This is my setup: 2 Raspberry PIs with freeradius 3.0.12 (allready tried the Backport version 3.2.1 as well) Unifi AC HD AccessPoints and as clients macOS and iOS devices (tried macOS versions 11.7 to 13.1) for testing I tried an Ubuntu client as well. Binding to Google LDAP works without any issues (radtest results in Access-Accept) I even see that the Radius server sends an “Access-Accept” to the clients but shortly after the client starts another Access-Request an that fails with: (9) eap: ERROR: rlm_eap (EAP): No EAP session matching state 0x864de94f8144fc95 (9) eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request (9) eap: Failed in handler Any idea what is happening here? Here the full output of a test with freeradius -X Ready to process requests (0) Received Access-Request Id 18 from 10.100.2.39:54686 to 10.100.1.65:1812 length 253 (0) User-Name = "klaus.mustermann" (0) NAS-IP-Address = 10.100.2.39 (0) NAS-Identifier = "8283c219e7f9" (0) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) Acct-Session-Id = "690B866461ACEC60" (0) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (0) Mobility-Domain-Id = 46476 (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027075 (0) Framed-MTU = 1400 (0) EAP-Message = 0x02670015016b6c6175732e6d75737465726d616e6e (0) Message-Authenticator = 0x8d4fe3c9b693e2d71ed16670b1d148a8 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 103 length 21 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: (TLS) Initiating new session (0) eap: Sending EAP Request (code 1) ID 104 length 6 (0) eap: EAP session adding &reply:State = 0x33754777331d52c5 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) session-state: Saving cached attributes (0) Framed-MTU = 994 (0) Sent Access-Challenge Id 18 from 10.100.1.65:1812 to 10.100.2.39:54686 length 64 (0) EAP-Message = 0x016800061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x33754777331d52c5d9592c39c6f43193 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 19 from 10.100.2.39:54686 to 10.100.1.65:1812 length 411 (1) User-Name = "klaus.mustermann" (1) NAS-IP-Address = 10.100.2.39 (1) NAS-Identifier = "8283c219e7f9" (1) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) Acct-Session-Id = "690B866461ACEC60" (1) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (1) Mobility-Domain-Id = 46476 (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027075 (1) Framed-MTU = 1400 (1) EAP-Message = 0x026800a115800000009716030100920100008e030363ce9a00af0158c4304b8191e349a5c4d7e344c71cf9ceb42fc1dc05eee1d4ea00002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000 (1) State = 0x33754777331d52c5d9592c39c6f43193 (1) Message-Authenticator = 0xaf2835db2d901930a1abf923e81f8d4b (1) Restoring &session-state (1) &session-state:Framed-MTU = 994 (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 104 length 161 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x33754777331d52c5 (1) eap: Finished EAP session with state 0x33754777331d52c5 (1) eap: Previous EAP request found for state 0x33754777331d52c5, released from the list (1) eap: Peer sent packet with method EAP TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Authenticate (1) eap_ttls: (TLS) EAP Peer says that the final record size will be 151 bytes (1) eap_ttls: (TLS) EAP Got all data (151 bytes) (1) eap_ttls: (TLS) Handshake state - before SSL initialization (1) eap_ttls: (TLS) Handshake state - Server before SSL initialization (1) eap_ttls: (TLS) Handshake state - Server before SSL initialization (1) eap_ttls: (TLS) recv TLS 1.3 Handshake, ClientHello (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client hello (1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerHello (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server hello (1) eap_ttls: (TLS) send TLS 1.2 Handshake, Certificate (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write certificate (1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerKeyExchange (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write key exchange (1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerHelloDone (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server done (1) eap_ttls: (TLS) Server : Need to read more data: SSLv3/TLS write server done (1) eap_ttls: (TLS) In Handshake Phase (1) eap: Sending EAP Request (code 1) ID 105 length 1004 (1) eap: EAP session adding &reply:State = 0x33754777321c52c5 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) session-state: Saving cached attributes (1) Framed-MTU = 994 (1) Sent Access-Challenge Id 19 from 10.100.1.65:1812 to 10.100.2.39:54686 length 1068 (1) EAP-Message = 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 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x33754777321c52c5d9592c39c6f43193 (1) Finished request Waking up in 4.8 seconds. (2) Received Access-Request Id 20 from 10.100.2.39:54686 to 10.100.1.65:1812 length 256 (2) User-Name = "klaus.mustermann" (2) NAS-IP-Address = 10.100.2.39 (2) NAS-Identifier = "8283c219e7f9" (2) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) Acct-Session-Id = "690B866461ACEC60" (2) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (2) Mobility-Domain-Id = 46476 (2) WLAN-Pairwise-Cipher = 1027076 (2) WLAN-Group-Cipher = 1027076 (2) WLAN-AKM-Suite = 1027075 (2) Framed-MTU = 1400 (2) EAP-Message = 0x026900061500 (2) State = 0x33754777321c52c5d9592c39c6f43193 (2) Message-Authenticator = 0x61c34e69e7f5f253a9fdf8868c0f8826 (2) Restoring &session-state (2) &session-state:Framed-MTU = 994 (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 105 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x33754777321c52c5 (2) eap: Finished EAP session with state 0x33754777321c52c5 (2) eap: Previous EAP request found for state 0x33754777321c52c5, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: (TLS) Peer ACKed our handshake fragment (2) eap: Sending EAP Request (code 1) ID 106 length 1004 (2) eap: EAP session adding &reply:State = 0x33754777311f52c5 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) session-state: Saving cached attributes (2) Framed-MTU = 994 (2) Sent Access-Challenge Id 20 from 10.100.1.65:1812 to 10.100.2.39:54686 length 1068 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x33754777311f52c5d9592c39c6f43193 (2) Finished request Waking up in 4.8 seconds. (3) Received Access-Request Id 21 from 10.100.2.39:54686 to 10.100.1.65:1812 length 256 (3) User-Name = "klaus.mustermann" (3) NAS-IP-Address = 10.100.2.39 (3) NAS-Identifier = "8283c219e7f9" (3) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) Acct-Session-Id = "690B866461ACEC60" (3) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (3) Mobility-Domain-Id = 46476 (3) WLAN-Pairwise-Cipher = 1027076 (3) WLAN-Group-Cipher = 1027076 (3) WLAN-AKM-Suite = 1027075 (3) Framed-MTU = 1400 (3) EAP-Message = 0x026a00061500 (3) State = 0x33754777311f52c5d9592c39c6f43193 (3) Message-Authenticator = 0xc8e04779851766a986a21ceea4790d00 (3) Restoring &session-state (3) &session-state:Framed-MTU = 994 (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 106 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x33754777311f52c5 (3) eap: Finished EAP session with state 0x33754777311f52c5 (3) eap: Previous EAP request found for state 0x33754777311f52c5, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: (TLS) Peer ACKed our handshake fragment (3) eap: Sending EAP Request (code 1) ID 107 length 1004 (3) eap: EAP session adding &reply:State = 0x33754777301e52c5 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) session-state: Saving cached attributes (3) Framed-MTU = 994 (3) Sent Access-Challenge Id 21 from 10.100.1.65:1812 to 10.100.2.39:54686 length 1068 (3) EAP-Message = 0x016b03ec15c0000011516e31183016060355040a130f42756464796272616e6420476d624831293027060355040b132042756464796272616e6420436572746966696361746520417574686f72697479311b30190603550403131242756464796272616e6420526f6f74204341311f301d06092a864886f70d010901161069744062756464796272616e642e6465301e170d3231303432333131353030305a170d3331303432333131353030305a3081bd310b3009060355040613024445310f300d060355040813064265726c696e310f300d060355040713064265726c696e31183016060355040a130f42756464796272616e6420476d624831293027060355040b132042756464796272616e6420436572746966696361746520417574686f72697479312630240603550403131d42756464796272616e6420496e7465726d656469617465204341203034311f301d06092a864886f70d010901161069744062756464796272616e642e646530820222300d06092a (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x33754777301e52c5d9592c39c6f43193 (3) Finished request Waking up in 4.8 seconds. (4) Received Access-Request Id 22 from 10.100.2.39:54686 to 10.100.1.65:1812 length 256 (4) User-Name = "klaus.mustermann" (4) NAS-IP-Address = 10.100.2.39 (4) NAS-Identifier = "8283c219e7f9" (4) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) Acct-Session-Id = "690B866461ACEC60" (4) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (4) Mobility-Domain-Id = 46476 (4) WLAN-Pairwise-Cipher = 1027076 (4) WLAN-Group-Cipher = 1027076 (4) WLAN-AKM-Suite = 1027075 (4) Framed-MTU = 1400 (4) EAP-Message = 0x026b00061500 (4) State = 0x33754777301e52c5d9592c39c6f43193 (4) Message-Authenticator = 0x8ebe69d74f104b81490506fbfd4fcc22 (4) Restoring &session-state (4) &session-state:Framed-MTU = 994 (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 107 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x33754777301e52c5 (4) eap: Finished EAP session with state 0x33754777301e52c5 (4) eap: Previous EAP request found for state 0x33754777301e52c5, released from the list (4) eap: Peer sent packet with method EAP TTLS (21) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: Authenticate (4) eap_ttls: (TLS) Peer ACKed our handshake fragment (4) eap: Sending EAP Request (code 1) ID 108 length 1004 (4) eap: EAP session adding &reply:State = 0x33754777371952c5 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) session-state: Saving cached attributes (4) Framed-MTU = 994 (4) Sent Access-Challenge Id 22 from 10.100.1.65:1812 to 10.100.2.39:54686 length 1068 (4) EAP-Message = 0x016c03ec15c00000115155040613024445310f300d060355040813064265726c696e310f300d060355040713064265726c696e31183016060355040a130f42756464796272616e6420476d624831293027060355040b132042756464796272616e6420436572746966696361746520417574686f72697479311b30190603550403131242756464796272616e6420526f6f74204341311f301d06092a864886f70d010901161069744062756464796272616e642e64658209009ce5d9f001129991300e0603551d0f0101ff04040302018630400603551d1f0101ff043630343032a030a02e862c687474703a2f2f63726c2e62756464796272616e642e64653a383038302f726f6f7463615f63726c2e70656d301106096086480186f8420101040403020007301e06096086480186f842010d0411160f786361206365727469666963617465300d06092a864886f70d01010b0500038202010014ba00b7b369be8d469dc9fe7cb4ea2b8b69f5ddf664529e7cfa7e5c23 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x33754777371952c5d9592c39c6f43193 (4) Finished request Waking up in 4.7 seconds. (5) Received Access-Request Id 23 from 10.100.2.39:54686 to 10.100.1.65:1812 length 256 (5) User-Name = "klaus.mustermann" (5) NAS-IP-Address = 10.100.2.39 (5) NAS-Identifier = "8283c219e7f9" (5) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) Acct-Session-Id = "690B866461ACEC60" (5) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (5) Mobility-Domain-Id = 46476 (5) WLAN-Pairwise-Cipher = 1027076 (5) WLAN-Group-Cipher = 1027076 (5) WLAN-AKM-Suite = 1027075 (5) Framed-MTU = 1400 (5) EAP-Message = 0x026c00061500 (5) State = 0x33754777371952c5d9592c39c6f43193 (5) Message-Authenticator = 0x2954664567eb90b58df983559fafc7ef (5) Restoring &session-state (5) &session-state:Framed-MTU = 994 (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 108 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x33754777371952c5 (5) eap: Finished EAP session with state 0x33754777371952c5 (5) eap: Previous EAP request found for state 0x33754777371952c5, released from the list (5) eap: Peer sent packet with method EAP TTLS (21) (5) eap: Calling submodule eap_ttls to process data (5) eap_ttls: Authenticate (5) eap_ttls: (TLS) Peer ACKed our handshake fragment (5) eap: Sending EAP Request (code 1) ID 109 length 467 (5) eap: EAP session adding &reply:State = 0x33754777361852c5 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) session-state: Saving cached attributes (5) Framed-MTU = 994 (5) Sent Access-Challenge Id 23 from 10.100.1.65:1812 to 10.100.2.39:54686 length 527 (5) EAP-Message = 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 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x33754777361852c5d9592c39c6f43193 (5) Finished request Waking up in 4.7 seconds. (6) Received Access-Request Id 24 from 10.100.2.39:54686 to 10.100.1.65:1812 length 386 (6) User-Name = "klaus.mustermann" (6) NAS-IP-Address = 10.100.2.39 (6) NAS-Identifier = "8283c219e7f9" (6) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (6) Connect-Info = "CONNECT 0Mbps 802.11b" (6) Acct-Session-Id = "690B866461ACEC60" (6) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (6) Mobility-Domain-Id = 46476 (6) WLAN-Pairwise-Cipher = 1027076 (6) WLAN-Group-Cipher = 1027076 (6) WLAN-AKM-Suite = 1027075 (6) Framed-MTU = 1400 (6) EAP-Message = 0x026d008815800000007e16030300461000004241041bdfa74e961e11ce04aae11e59adff899c7e45c93c23a868913c8e6dbc6b61c8c93027484c43331a120609e34bb63d4a01335611c152662eda522aa015747d24140303000101160303002896671043239b41663014b73a88eb2b056a398cc8c31e8c6f1940273f2cc64b884907fe10b3c697de (6) State = 0x33754777361852c5d9592c39c6f43193 (6) Message-Authenticator = 0x02f8f3ac8779506b6dc11ac581eb8a01 (6) Restoring &session-state (6) &session-state:Framed-MTU = 994 (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 109 length 136 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x33754777361852c5 (6) eap: Finished EAP session with state 0x33754777361852c5 (6) eap: Previous EAP request found for state 0x33754777361852c5, released from the list (6) eap: Peer sent packet with method EAP TTLS (21) (6) eap: Calling submodule eap_ttls to process data (6) eap_ttls: Authenticate (6) eap_ttls: (TLS) EAP Peer says that the final record size will be 126 bytes (6) eap_ttls: (TLS) EAP Got all data (126 bytes) (6) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server done (6) eap_ttls: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange (6) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client key exchange (6) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read change cipher spec (6) eap_ttls: (TLS) recv TLS 1.2 Handshake, Finished (6) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read finished (6) eap_ttls: (TLS) send TLS 1.2 ChangeCipherSpec (6) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec (6) eap_ttls: (TLS) send TLS 1.2 Handshake, Finished (6) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write finished (6) eap_ttls: (TLS) Handshake state - SSL negotiation finished successfully (6) eap_ttls: (TLS) Connection Established (6) eap_ttls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) eap_ttls: TLS-Session-Version = "TLS 1.2" (6) eap: Sending EAP Request (code 1) ID 110 length 61 (6) eap: EAP session adding &reply:State = 0x33754777351b52c5 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) session-state: Saving cached attributes (6) Framed-MTU = 994 (6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) TLS-Session-Version = "TLS 1.2" (6) Sent Access-Challenge Id 24 from 10.100.1.65:1812 to 10.100.2.39:54686 length 119 (6) EAP-Message = 0x016e003d1580000000331403030001011603030028c5e315035630988a3b83c13d63026f7f68b51fc4cae498e85bec63a7b3beba6177951acbd7c9e48e (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x33754777351b52c5d9592c39c6f43193 (6) Finished request Waking up in 4.7 seconds. (7) Received Access-Request Id 25 from 10.100.2.39:54686 to 10.100.1.65:1812 length 321 (7) User-Name = "klaus.mustermann" (7) NAS-IP-Address = 10.100.2.39 (7) NAS-Identifier = "8283c219e7f9" (7) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (7) NAS-Port-Type = Wireless-802.11 (7) Service-Type = Framed-User (7) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (7) Connect-Info = "CONNECT 0Mbps 802.11b" (7) Acct-Session-Id = "690B866461ACEC60" (7) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (7) Mobility-Domain-Id = 46476 (7) WLAN-Pairwise-Cipher = 1027076 (7) WLAN-Group-Cipher = 1027076 (7) WLAN-AKM-Suite = 1027075 (7) Framed-MTU = 1400 (7) EAP-Message = 0x026e004715800000003d170303003896671043239b4167e00afbeca8b555b120c23769698d81a6b5a879ecc3c8fd3cd740dc135bdef5fcadd7fda6a166609e4d7957502348d9f3 (7) State = 0x33754777351b52c5d9592c39c6f43193 (7) Message-Authenticator = 0xa8b841519028def71e27cfef249be756 (7) Restoring &session-state (7) &session-state:Framed-MTU = 994 (7) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) &session-state:TLS-Session-Version = "TLS 1.2" (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 110 length 71 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x33754777351b52c5 (7) eap: Finished EAP session with state 0x33754777351b52c5 (7) eap: Previous EAP request found for state 0x33754777351b52c5, released from the list (7) eap: Peer sent packet with method EAP TTLS (21) (7) eap: Calling submodule eap_ttls to process data (7) eap_ttls: Authenticate (7) eap_ttls: (TLS) EAP Peer says that the final record size will be 61 bytes (7) eap_ttls: (TLS) EAP Got all data (61 bytes) (7) eap_ttls: Session established. Proceeding to decode tunneled attributes (7) eap_ttls: Got tunneled request (7) eap_ttls: EAP-Message = 0x02000015016b6c6175732e6d75737465726d616e6e (7) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_ttls: Got tunneled identity of klaus.mustermann (7) eap_ttls: Setting default EAP type for tunneled EAP session (7) eap_ttls: Sending tunneled request (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x02000015016b6c6175732e6d75737465726d616e6e (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "klaus.mustermann" (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 0 length 21 (7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Peer sent packet with method EAP Identity (1) (7) eap: Calling submodule eap_gtc to process data (7) eap_gtc: EXPAND Password: (7) eap_gtc: --> Password: (7) eap: Sending EAP Request (code 1) ID 1 length 15 (7) eap: EAP session adding &reply:State = 0xb4a2b867b4a3bebf (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) EAP-Message = 0x0101000f0650617373776f72643a20 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xb4a2b867b4a3bebfd5edaac839855c28 (7) eap_ttls: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 111 length 63 (7) eap: EAP session adding &reply:State = 0x33754777341a52c5 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) session-state: Saving cached attributes (7) Framed-MTU = 994 (7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) TLS-Session-Version = "TLS 1.2" (7) Sent Access-Challenge Id 25 from 10.100.1.65:1812 to 10.100.2.39:54686 length 121 (7) EAP-Message = 0x016f003f1580000000351703030030c5e315035630988b4ad830befda4dba2a51fa8f9388f8da63a7ea11b76e432bbb988ecf99f49e2ebe5cd501621aec81b (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x33754777341a52c5d9592c39c6f43193 (7) Finished request Waking up in 4.6 seconds. (8) Received Access-Request Id 26 from 10.100.2.39:54686 to 10.100.1.65:1812 length 317 (8) User-Name = "klaus.mustermann" (8) NAS-IP-Address = 10.100.2.39 (8) NAS-Identifier = "8283c219e7f9" (8) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (8) NAS-Port-Type = Wireless-802.11 (8) Service-Type = Framed-User (8) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (8) Connect-Info = "CONNECT 0Mbps 802.11b" (8) Acct-Session-Id = "690B866461ACEC60" (8) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (8) Mobility-Domain-Id = 46476 (8) WLAN-Pairwise-Cipher = 1027076 (8) WLAN-Group-Cipher = 1027076 (8) WLAN-AKM-Suite = 1027075 (8) Framed-MTU = 1400 (8) EAP-Message = 0x026f0043158000000039170303003496671043239b41683128359379c1a6a7ff944f84eb0b3f626e65ecb31042ebf597e0b5314226e2bcea13a41d6e380c98153d5dd7 (8) State = 0x33754777341a52c5d9592c39c6f43193 (8) Message-Authenticator = 0xe468605d47fb0bba1b52f632f0e1589a (8) Restoring &session-state (8) &session-state:Framed-MTU = 994 (8) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8) &session-state:TLS-Session-Version = "TLS 1.2" (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 111 length 67 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0xb4a2b867b4a3bebf (8) eap: Finished EAP session with state 0x33754777341a52c5 (8) eap: Previous EAP request found for state 0x33754777341a52c5, released from the list (8) eap: Peer sent packet with method EAP TTLS (21) (8) eap: Calling submodule eap_ttls to process data (8) eap_ttls: Authenticate (8) eap_ttls: (TLS) EAP Peer says that the final record size will be 57 bytes (8) eap_ttls: (TLS) EAP Got all data (57 bytes) (8) eap_ttls: Session established. Proceeding to decode tunneled attributes (8) eap_ttls: Got tunneled request (8) eap_ttls: EAP-Message = 0x0201001306736167616e382e53697a61626c65 (8) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_ttls: Sending tunneled request (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x0201001306736167616e382e53697a61626c65 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "klaus.mustermann" (8) State = 0xb4a2b867b4a3bebfd5edaac839855c28 (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 1 length 19 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) [files] = noop rlm_ldap (ldap): Reserved connection (0) (8) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (8) ldap: --> (uid=klaus.mustermann) (8) ldap: Performing search in "dc=pretendco,dc=de" with filter "(uid=klaus.mustermann)", scope "sub" (8) ldap: Waiting for search result... (8) ldap: User object found at DN "uid=klaus.mustermann,ou=Standard Mitarbeiter,ou=Mitarbeiter,ou=Users,dc=pretendco,dc=de" (8) ldap: Processing user attributes (8) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (8) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (0) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... ber_get_next failed, errno=11. rlm_ldap (ldap): Bind successful (8) [ldap] = ok (8) [expiration] = noop (8) [logintime] = noop (8) [pap] = noop (8) if (User-Password) { (8) if (User-Password) -> FALSE (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0xb4a2b867b4a3bebf (8) eap: Finished EAP session with state 0xb4a2b867b4a3bebf (8) eap: Previous EAP request found for state 0xb4a2b867b4a3bebf, released from the list (8) eap: Peer sent packet with method EAP GTC (6) (8) eap: Calling submodule eap_gtc to process data (8) eap_gtc: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) eap_gtc: Auth-Type PAP { rlm_ldap (ldap): Reserved connection (1) (8) ldap: Login attempt by "klaus.mustermann" (8) ldap: Using user DN from request "uid=klaus.mustermann,ou=Standard Mitarbeiter,ou=Mitarbeiter,ou=Users,dc=pretendco,dc=de" (8) ldap: Waiting for bind result... (8) ldap: Bind successful (8) ldap: Bind as user "uid=klaus.mustermann,ou=Standard Mitarbeiter,ou=Mitarbeiter,ou=Users,dc=pretendco,dc=de" was successful rlm_ldap (ldap): Released connection (1) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 rlm_ldap (ldap): Waiting for bind result... ber_get_next failed, errno=11. rlm_ldap (ldap): Bind successful (8) eap_gtc: [ldap] = ok (8) eap_gtc: } # Auth-Type PAP = ok (8) eap: Sending EAP Success (code 3) ID 1 length 4 (8) eap: Freeing handler (8) [eap] = ok (8) } # authenticate = ok (8) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) post-auth { (8) if (0) { (8) if (0) -> FALSE (8) } # post-auth = noop (8) } # server inner-tunnel (8) Virtual server sending reply (8) EAP-Message = 0x03010004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) User-Name = "klaus.mustermann" (8) eap_ttls: Got tunneled Access-Accept (8) eap: Sending EAP Success (code 3) ID 111 length 4 (8) eap: Freeing handler (8) [eap] = ok (8) } # authenticate = ok (8) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (8) post-auth { (8) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (8) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (8) update { (8) &reply::Framed-MTU += &session-state:Framed-MTU[*] -> 994 (8) &reply::TLS-Session-Cipher-Suite += &session-state:TLS-Session-Cipher-Suite[*] -> 'ECDHE-RSA-AES256-GCM-SHA384' (8) &reply::TLS-Session-Version += &session-state:TLS-Session-Version[*] -> 'TLS 1.2' (8) } # update = noop (8) [exec] = noop (8) policy remove_reply_message_if_eap { (8) if (&reply:EAP-Message && &reply:Reply-Message) { (8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (8) else { (8) [noop] = noop (8) } # else = noop (8) } # policy remove_reply_message_if_eap = noop (8) } # post-auth = noop (8) Sent Access-Accept Id 26 from 10.100.1.65:1812 to 10.100.2.39:54686 length 184 (8) MS-MPPE-Recv-Key = 0xeb472d316fdc874c9b4fab09804dffb9627d034a793910ca0f276473f2db3e62 (8) MS-MPPE-Send-Key = 0x3cde6513ea1f92c64ee3d938a85980091ecccdeb288c640f958a8f0d4324af64 (8) EAP-Message = 0x036f0004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) User-Name = "klaus.mustermann" (8) Framed-MTU += 994 (8) Finished request Waking up in 1.1 seconds. (9) Received Access-Request Id 26 from 10.100.2.39:38737 to 10.100.1.65:1812 length 317 (9) User-Name = "klaus.mustermann" (9) NAS-IP-Address = 10.100.2.39 (9) NAS-Identifier = "8283c219e7f9" (9) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (9) NAS-Port-Type = Wireless-802.11 (9) Service-Type = Framed-User (9) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (9) Connect-Info = "CONNECT 0Mbps 802.11b" (9) Acct-Session-Id = "690B866461ACEC60" (9) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (9) Mobility-Domain-Id = 46476 (9) WLAN-Pairwise-Cipher = 1027076 (9) WLAN-Group-Cipher = 1027076 (9) WLAN-AKM-Suite = 1027075 (9) Framed-MTU = 1400 (9) EAP-Message = 0x026f0043158000000039170303003496671043239b41683128359379c1a6a7ff944f84eb0b3f626e65ecb31042ebf597e0b5314226e2bcea13a41d6e380c98153d5dd7 (9) State = 0x33754777341a52c5d9592c39c6f43193 (9) Message-Authenticator = 0xe468605d47fb0bba1b52f632f0e1589a (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 111 length 67 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) authenticate { (9) eap: ERROR: rlm_eap (EAP): No EAP session matching state 0x33754777341a52c5 (9) eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request (9) eap: Failed in handler (9) [eap] = invalid (9) } # authenticate = invalid (9) Failed to authenticate the user (9) Using Post-Auth-Type Reject (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) Post-Auth-Type REJECT { (9) attr_filter.access_reject: EXPAND %{User-Name} (9) attr_filter.access_reject: --> klaus.mustermann (9) attr_filter.access_reject: Matched entry DEFAULT at line 11 (9) [attr_filter.access_reject] = updated (9) eap: ERROR: rlm_eap (EAP): No EAP session matching state 0x33754777341a52c5 (9) eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request (9) eap: Failed to get handler, probably already removed, not inserting EAP-Failure (9) [eap] = noop (9) policy remove_reply_message_if_eap { (9) if (&reply:EAP-Message && &reply:Reply-Message) { (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (9) else { (9) [noop] = noop (9) } # else = noop (9) } # policy remove_reply_message_if_eap = noop (9) } # Post-Auth-Type REJECT = updated (9) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (10) Received Access-Request Id 26 from 10.100.2.39:45497 to 10.100.1.65:1812 length 317 (10) User-Name = "klaus.mustermann" (10) NAS-IP-Address = 10.100.2.39 (10) NAS-Identifier = "8283c219e7f9" (10) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" (10) NAS-Port-Type = Wireless-802.11 (10) Service-Type = Framed-User (10) Calling-Station-Id = "F8-4D-89-6D-CB-AE" (10) Connect-Info = "CONNECT 0Mbps 802.11b" (10) Acct-Session-Id = "690B866461ACEC60" (10) Acct-Multi-Session-Id = "3EA4011978DCDC0A" (10) Mobility-Domain-Id = 46476 (10) WLAN-Pairwise-Cipher = 1027076 (10) WLAN-Group-Cipher = 1027076 (10) WLAN-AKM-Suite = 1027075 (10) Framed-MTU = 1400 (10) EAP-Message = 0x026f0043158000000039170303003496671043239b41683128359379c1a6a7ff944f84eb0b3f626e65ecb31042ebf597e0b5314226e2bcea13a41d6e380c98153d5dd7 (10) State = 0x33754777341a52c5d9592c39c6f43193 (10) Message-Authenticator = 0xe468605d47fb0bba1b52f632f0e1589a (10) session-state: No cached attributes (10) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) eap: Peer sent EAP Response (code 2) ID 111 length 67 (10) eap: Continuing tunnel setup (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = eap (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (10) authenticate { (10) eap: ERROR: rlm_eap (EAP): No EAP session matching state 0x33754777341a52c5 (10) eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request (10) eap: Failed in handler (10) [eap] = invalid (10) } # authenticate = invalid (10) Failed to authenticate the user (10) Using Post-Auth-Type Reject (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (10) Post-Auth-Type REJECT { (10) attr_filter.access_reject: EXPAND %{User-Name} (10) attr_filter.access_reject: --> klaus.mustermann (10) attr_filter.access_reject: Matched entry DEFAULT at line 11 (10) [attr_filter.access_reject] = updated (10) eap: ERROR: rlm_eap (EAP): No EAP session matching state 0x33754777341a52c5 (10) eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request (10) eap: Failed to get handler, probably already removed, not inserting EAP-Failure (10) [eap] = noop (10) policy remove_reply_message_if_eap { (10) if (&reply:EAP-Message && &reply:Reply-Message) { (10) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (10) else { (10) [noop] = noop (10) } # else = noop (10) } # policy remove_reply_message_if_eap = noop (10) } # Post-Auth-Type REJECT = updated (10) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.2 seconds. (9) Sending delayed response (9) Sent Access-Reject Id 26 from 10.100.1.65:1812 to 10.100.2.39:38737 length 20 Waking up in 0.1 seconds. (0) Cleaning up request packet ID 18 with timestamp +35 due to cleanup_delay was reached Waking up in 0.1 seconds. (1) Cleaning up request packet ID 19 with timestamp +35 due to cleanup_delay was reached (2) Cleaning up request packet ID 20 with timestamp +35 due to cleanup_delay was reached (3) Cleaning up request packet ID 21 with timestamp +35 due to cleanup_delay was reached (4) Cleaning up request packet ID 22 with timestamp +35 due to cleanup_delay was reached (5) Cleaning up request packet ID 23 with timestamp +35 due to cleanup_delay was reached (6) Cleaning up request packet ID 24 with timestamp +35 due to cleanup_delay was reached (7) Cleaning up request packet ID 25 with timestamp +35 due to cleanup_delay was reached (10) Sending delayed response (10) Sent Access-Reject Id 26 from 10.100.1.65:1812 to 10.100.2.39:45497 length 20 Any Idea what I am doing wrong here? Regards Henning

3 4

RADIUS failing to start correctly when remote DB is unavailable.
by Sea Gull 31 Jan '23

31 Jan '23

Hi, Good afternoon! I have a setup where RADIUS is set to write to multiple DBs simultaneously. I have set this as follows: 1. Copied the SQL instance in /etc/raddb/mods-enabled/sql and had it renamed and configured accordingly. 2. Called them both 3. In the pool, I have set start=0 4. Set read_client to no Although from debug these seem to be correctly set, I am still getting the message that RADIUS is trying to connect to the DB when it is unavailable. After quite a number of minutes and 3 retries, RADIUS fails to start. I have attached the full debug and included some explanation too along the way. Thanks in advance. Kind Regards, SG

3 9

packages.networkradius.com down?
by Rens Houben 31 Jan '23

31 Jan '23

Hello, At my workplace we're planning a major infrastructure migration which involves (re)installing FreeRADIUS from the networkradius.com repositories. I've been using vms and ansible scripting to test the migration path this past month and it has always gone just fine; however when I ran a general rehearsal test this morning several errors occurred involving intermittent connection timeouts downloading packages from the packages.networkradius.com source. Proxies didn't help, and attempting a manual download via browser or wget similarly times out during the download. Is this a known issue? --Rens

2 3

Using attribute reference from variable content in unlang
by Charles-Antoine Guillat-Guignard 30 Jan '23

30 Jan '23

Hello, I am trying to implement some db based attribute handling (names, operator and values from db), and I am struggling with a dynamic handling of attributes references (names). Looking at https://freeradius.org/radiusd/man/unlang.txt (ATTRIBUTE REFERENCES section), I see no exemple matching what I want to do (attribute name is always known, and static). What I try to achieve would look a bit like that (which doesn't work) : : # Exemple for Attributes-Actions values # A-AL-AAA,:=,1 # A-AL-DHCP,:=,0 foreach &Attributes-Actions { update request { Attributes-Action := "%{Foreach-Variable-2}" } %{explode:Attributes-Action ,} update reply { # for debugging, contains expected value Reply-Message += "index 0 : %{Attributes-Action[0]}" # this fails "%{Attributes-Action[0]}" := "%{Attributes-Action[2]}" } } Am I missing something? Is there another way to achieve dynamic handling of attributes names, to be able to modify an attribute whose name/reference is not pre-declared in unlang script (unknown in unlang script, but ofc declared in dictionary). Thank you in advance. Kind regards, Charles-Antoine Guillat-Guignard

2 4

rlm_ldap : cipher_list parameter support ?
by Arnaud LAURIOU 30 Jan '23

30 Jan '23

Hi, With FR 3.2.1, ubuntu 20.04, I can't bind to LDAP server using an old TLS 1.0 version. With TLS section parameters in ldap.conf : tls { start_tls = no ca_file = "/etc/freeradius/ca_cert_hosting/12126560.pem" require_cert = demand tls_min_version = "1.0" cipher_list = "DEFAULT@SECLEVEL=1" } I have in debug log for this LDAP server : # Loaded module rlm_ldap ... tls { ca_file = "/etc/freeradius/ca_cert_hosting/12126560.pem" tls_min_version = "1.0" start_tls = no require_cert = "demand" } And the error when trying to bind : TLS: can't connect: (unknown error code). It seems that 'cipher_list' parameter has disappeared in the debug log, is this parameter supported in ldap.conf ? If not, how can I bind and check certificate ('demand' or 'hard' option) to a TLS 1.0 LDAP server ? Regards, Arnaud

2 2

Freeradius parallel execution the python3 module
by ALexp 29 Jan '23

29 Jan '23

1 0

Re: Queue Statistics always showing 0
by Ashraf Al-Basti 25 Jan '23

25 Jan '23

Hi Alan, Is that mean Freeradius will show 0 in the Queue Statistics in both cases: Full / Empty? this is what we are getting now. Is there another way to check if the Queue full rather than checking the logs? Thanks On Mon, Jan 23, 2023 at 6:39 PM < freeradius-users-request(a)lists.freeradius.org> wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Re: Queue Statistics always showing 0 (Alan DeKok) > 2. FR 3.0.26 and TLS 1.3 (Chris Howley) > 3. Freeradius-server-3.0.25 docking mariadb error > (=?gb18030?B?zfjC58qxtPo=?=) > 4. Freeradius Google Secure LDAP EAP-GTC issues (Henning Kessler) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 23 Jan 2023 08:46:56 -0500 > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: Queue Statistics always showing 0 > Message-ID: <4F2136FC-DB9C-418B-995D-2C499FF7BD82(a)deployingradius.com> > Content-Type: text/plain; charset=us-ascii > > On Jan 23, 2023, at 3:24 AM, Ashraf Al-Basti <albasti(a)gmail.com> wrote: > > I'm trying to get Freeradius statistics but I can see that the Queue > > statistics are always 0. > > That's a side effect of moving to the faster atomic queues. It''s more > difficult to get accurate stats for the queue length. > > Plus, the queue starts are generally meaningless. Either everything is > OK, and the queue length is zero, or things are going wrong, and the queue > is full. > > There is very very few situations where the queue are partially full. > > Alan DeKok. > > > > ------------------------------ > > Message: 2 > Date: Mon, 23 Jan 2023 14:18:56 +0000 > From: Chris Howley <C.P.Howley(a)leeds.ac.uk> > To: "freeradius-users(a)lists.freeradius.org" > <freeradius-users(a)lists.freeradius.org> > Subject: FR 3.0.26 and TLS 1.3 > Message-ID: > < > AS4PR03MB823284ABA3422F7FBDAB898E8EC89(a)AS4PR03MB8232.eurprd03.prod.outlook.com > > > > Content-Type: text/plain; charset="iso-8859-1" > > Hello Support team, > > I recently download the FR packages from your CentOS 7 repository, and I > noticed that the 3.0.26 server was built with OpenSSL 1.0.2k (see below). > Should the server be built with OpenSSL 1.1.1 to support TLS 1.3? Please > excuse my ignorance if I've asked a stupid question. > > Thanks, > > Chris Howley > > Mon Jan 23 13:50:17 2023 : Debug: Server was built with: > Mon Jan 23 13:50:17 2023 : Debug: accounting : yes > Mon Jan 23 13:50:17 2023 : Debug: authentication : yes > Mon Jan 23 13:50:17 2023 : Debug: ascend-binary-attributes : yes > Mon Jan 23 13:50:17 2023 : Debug: coa : yes > Mon Jan 23 13:50:17 2023 : Debug: control-socket : yes > Mon Jan 23 13:50:17 2023 : Debug: detail : yes > Mon Jan 23 13:50:17 2023 : Debug: dhcp : yes > Mon Jan 23 13:50:17 2023 : Debug: dynamic-clients : yes > Mon Jan 23 13:50:17 2023 : Debug: osfc2 : no > Mon Jan 23 13:50:17 2023 : Debug: proxy : yes > Mon Jan 23 13:50:17 2023 : Debug: regex-pcre : yes > Mon Jan 23 13:50:17 2023 : Debug: regex-posix : no > Mon Jan 23 13:50:17 2023 : Debug: regex-posix-extended : no > Mon Jan 23 13:50:17 2023 : Debug: session-management : yes > Mon Jan 23 13:50:17 2023 : Debug: stats : yes > Mon Jan 23 13:50:17 2023 : Debug: systemd : yes > Mon Jan 23 13:50:17 2023 : Debug: tcp : yes > Mon Jan 23 13:50:17 2023 : Debug: threads : yes > Mon Jan 23 13:50:17 2023 : Debug: tls : yes > Mon Jan 23 13:50:17 2023 : Debug: unlang : yes > Mon Jan 23 13:50:17 2023 : Debug: vmps : yes > Mon Jan 23 13:50:17 2023 : Debug: developer : no > Mon Jan 23 13:50:17 2023 : Debug: Server core libs: > Mon Jan 23 13:50:17 2023 : Debug: freeradius-server : 3.0.26 > Mon Jan 23 13:50:17 2023 : Debug: talloc : 2.1.* > Mon Jan 23 13:50:17 2023 : Debug: ssl : 1.0.2k > release > Mon Jan 23 13:50:17 2023 : Debug: pcre : 8.32 > 2012-11-30 > Mon Jan 23 13:50:17 2023 : Debug: Endianness: > Mon Jan 23 13:50:17 2023 : Debug: little > Mon Jan 23 13:50:17 2023 : Debug: Compilation flags: > Mon Jan 23 13:50:17 2023 : Debug: cppflags : > Mon Jan 23 13:50:17 2023 : Debug: cflags : -I. -Isrc -include > src/freeradius-devel/autoconf.h -include src/freeradius-devel/build.h > -include src/freeradius-devel/featur > es.h -include src/freeradius-devel/radpaths.h -fno-strict-aliasing > -Wno-date-time -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions > -fstack-protector-strong --param=s > sp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -Wall -std=c99 > -D_GNU_SOURCE -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 > -DNDEBUG -DIS_MODULE=1 > Mon Jan 23 13:50:17 2023 : Debug: ldflags : -Wl,--build-id > Mon Jan 23 13:50:17 2023 : Debug: libs : -lcrypto -lssl -ltalloc > -lpcre -lnsl -lresolv -ldl -lpthread -lreadline > Mon Jan 23 13:50:17 2023 : Debug: > Mon Jan 23 13:50:17 2023 : Info: FreeRADIUS Version 3.0.26 > > > > ------------------------------ > > Message: 3 > Date: Mon, 23 Jan 2023 22:29:20 +0800 > From: "=?gb18030?B?zfjC58qxtPo=?=" <1511815642(a)qq.com> > To: "=?gb18030?B?ZnJlZXJhZGl1cy11c2Vycw==?=" > <freeradius-users(a)lists.freeradius.org> > Subject: Freeradius-server-3.0.25 docking mariadb error > Message-ID: <tencent_7F1BF56F0ABA0721320788A7754655CCA108(a)qq.com> > Content-Type: text/plain; charset="gb18030" > > Hello, > ezhangiso@ezhangiso-virtual-machine:/$ docker exec -it radius-test > /bin/bash > root@4ff809b932fe:/# chgrp -h freerad /etc/freeradius/mods-available/sql > root@4ff809b932fe:/# chown -R freerad:freerad > /etc/freeradius/mods-enabled/sql > root@4ff809b932fe:/# vi etc/freeradius/mods-available/sql > root@4ff809b932fe:/# vi /etc/freeradius/sites-available/default > root@4ff809b932fe:/# vi /etc/freeradius/sites-available/inner-tunnel > root@4ff809b932fe:/# vi radiusd.conf > root@4ff809b932fe:/# vi /etc/freeradius/radiusd.conf > root@4ff809b932fe:/# cat etc/freeradius/mods-available/sql > > > dialect = "mysql" > driver = "rlm_sql_mysql" > sqlite { > filename = "/tmp/freeradius.db" > busy_timeout = 200 > bootstrap = > "${modconfdir}/${..:name}/main/sqlite/schema.sql" > } > > > mysql { > > tls_required = no > tls_check_cert = no > tls_check_cert_cn = no > } > warnings = auto > } > > > postgresql { > > > send_application_name = yes > } > > > # > mongo { > appname = "freeradius" > > > tls { > certificate_file = /path/to/file > certificate_password = "password" > ca_file = /path/to/file > ca_dir = /path/to/directory > crl_file = /path/to/file > weak_cert_validation = false > allow_invalid_hostname = false > > > server = "10.0.8.31" > port = 3306 > login = "radius" > password = "radius" > > > radius_db = "radius" > acct_table1 = "radacct" > acct_table2 = "radacct" > postauth_table = "radpostauth" > authcheck_table = "radcheck" > groupcheck_table = "radgroupcheck" > authreply_table = "radreply" > groupreply_table = "radgroupreply" > usergroup_table = "radusergroup" > > > delete_stale_sessions = yes > > > pool { > start = ${thread[pool].start_servers} > min = ${thread[pool].min_spare_servers} > max = ${thread[pool].max_servers} > uses = 0 > retry_delay = 30 > lifetime = 0 > idle_timeout = 60 > client_table = "nas" > group_attribute = "SQL-Group" > $INCLUDE ${modconfdir}/${.:name}/main/${dialect}/queries.conf > } > root@4ff809b932fe:/# cat /etc/freeradius/radiusd.conf > > > prefix = /usr > exec_prefix = /usr > sysconfdir = /etc > localstatedir = /var > sbindir = ${exec_prefix}/sbin > logdir = /var/log/freeradius > raddbdir = /etc/freeradius > radacctdir = ${logdir}/radacct > > > name = freeradius > > > confdir = ${raddbdir} > modconfdir = ${confdir}/mods-config > certdir = ${confdir}/certs > cadir   = ${confdir}/certs > run_dir = ${localstatedir}/run/${name} > > > db_dir = ${raddbdir} > > > libdir = /usr/lib/freeradius > > > pidfile = ${run_dir}/${name}.pid > > > correct_escapes = true > max_request_time = 30 > cleanup_delay = 5 > hostname_lookups = no > log { > destination = files > colourise = yes > file = ${logdir}/radius.log > syslog_facility = daemon > stripped_names = no > auth = no > auth_badpass = no > auth_goodpass = no > msg_denied = "You are already logged in - access denied" > } > checkrad = ${sbindir}/checkrad > ENV { > } > > > security { > user = freerad > group = freerad > allow_core_dumps = no > max_attributes = 200 > reject_delay = 1 > status_server = yes > } > > > proxy_requests  = yes > $INCLUDE proxy.conf > $INCLUDE clients.conf > thread pool { > start_servers = 5 > max_servers = 32 > min_spare_servers = 3 > max_spare_servers = 10 > max_requests_per_server = 0 > modules { > $INCLUDE mods-enabled/sql > > > $INCLUDE mods-enabled/ > } > > > policy { > $INCLUDE policy.d/ > } > > > $INCLUDE sites-enabled/ > > > root@4ff809b932fe:/# apt install mariadb-client > > > root@4ff809b932fe:/# mysql -h 10.0.8.31 -uradius -p radius > Enter password: > Reading table information for completion of table and column names > You can turn off this feature to get a quicker startup with -A > > > Welcome to the MariaDB monitor.  Commands end with ; or \g. > Your MariaDB connection id is 3 > Server version: 10.6.5-MariaDB-1:10.6.5+maria~focal mariadb.org binary > distribution > > > Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others. > > > Type 'help;' or '\h' for help. Type '\c' to clear the current input > statement. > > > MariaDB [radius]> show tables; > +------------------+ > | Tables_in_radius | > +------------------+ > | nas              | > | radacct          | > | radcheck         | > | radgroupcheck    | > | radgroupreply    | > | radpostauth      | > | radreply         | > | radusergroup     | > +------------------+ > 8 rows in set (0.00 sec) > > > MariaDB [radius]> exit > Bye > root@4ff809b932fe:/# exit > exit > ezhangiso@ezhangiso-virtual-machine:/$ docker commit radius-test > radius-mariadb > sha256:1b5a68d2c3c3aaf70be72f8dcbfda27a7cf63e7ba448f412b73bd5f0d8aef63b > ezhangiso@ezhangiso-virtual-machine:/$ docker stop radius-test > radius-test > ezhangiso@ezhangiso-virtual-machine:/$ docker run --rm --name myradius -t > -p1812-1813:1812-1813/udp radius-mariadb -X > FreeRADIUS Version 3.0.25 > Copyright (C) 1999-2021 The FreeRADIUS server project and contributors > There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A > PARTICULAR PURPOSE > You may redistribute copies of FreeRADIUS under the terms of the > GNU General Public License > For more information about these matters, see the file named COPYRIGHT > Starting - reading configuration files ... > including dictionary file /usr/share/freeradius/dictionary > including dictionary file /usr/share/freeradius/dictionary.dhcp > including dictionary file /usr/share/freeradius/dictionary.vqp > including dictionary file /etc/freeradius/dictionary > including configuration file /etc/freeradius/radiusd.conf > including configuration file /etc/freeradius/proxy.conf > including configuration file /etc/freeradius/clients.conf > including configuration file /etc/freeradius/mods-enabled/sql > /etc/freeradius/mods-enabled/sql[365]: Reference "${dialect}" not found > Errors reading or parsing /etc/freeradius/radiusd.conf > ezhangiso@ezhangiso-virtual-machine:/$ > > > Can anyone shed some light on this and point me in the right direction what > else should I do? > > ------------------------------ > > Message: 4 > Date: Mon, 23 Jan 2023 15:38:42 +0100 > From: Henning Kessler <maillist(a)henningkessler.de> > To: freeradius-users(a)lists.freeradius.org > Subject: Freeradius Google Secure LDAP EAP-GTC issues > Message-ID: <54ECCD6B-D2B4-4F67-9E5A-89EB44B2EBE3(a)henningkessler.de> > Content-Type: text/plain; charset=utf-8 > > Hello, > > I followed this tutorial ( > https://www.nasirhafeez.com/wp-comments-post.php) for testing purposes > several times and it worked flawlessly. several month later I wanted to put > it in production and it stop working. > > This is my setup: 2 Raspberry PIs with freeradius 3.0.12 (allready tried > the Backport version 3.2.1 as well) Unifi AC HD AccessPoints and as clients > macOS and iOS devices (tried macOS versions 11.7 to 13.1) for testing I > tried an Ubuntu client as well. > > Binding to Google LDAP works without any issues (radtest results in > Access-Accept) I even see that the Radius server sends an ?Access-Accept? > to the clients but shortly after the client starts another Access-Request > an that fails with: > > (9) eap: ERROR: rlm_eap (EAP): No EAP session matching state > 0x864de94f8144fc95 > (9) eap: Either EAP-request timed out OR EAP-response to an unknown > EAP-request > (9) eap: Failed in handler > > Any idea what is happening here? > > Here the full output of a test with freeradius -X > > Ready to process requests > (0) Received Access-Request Id 18 from 10.100.2.39:54686 to > 10.100.1.65:1812 length 253 > (0) User-Name = "klaus.mustermann" > (0) NAS-IP-Address = 10.100.2.39 > (0) NAS-Identifier = "8283c219e7f9" > (0) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" > (0) NAS-Port-Type = Wireless-802.11 > (0) Service-Type = Framed-User > (0) Calling-Station-Id = "F8-4D-89-6D-CB-AE" > (0) Connect-Info = "CONNECT 0Mbps 802.11b" > (0) Acct-Session-Id = "690B866461ACEC60" > (0) Acct-Multi-Session-Id = "3EA4011978DCDC0A" > (0) Mobility-Domain-Id = 46476 > (0) WLAN-Pairwise-Cipher = 1027076 > (0) WLAN-Group-Cipher = 1027076 > (0) WLAN-AKM-Suite = 1027075 > (0) Framed-MTU = 1400 > (0) EAP-Message = 0x02670015016b6c6175732e6d75737465726d616e6e > (0) Message-Authenticator = 0x8d4fe3c9b693e2d71ed16670b1d148a8 > (0) # Executing section authorize from file > /etc/freeradius/3.0/sites-enabled/default > (0) authorize { > (0) policy filter_username { > (0) if (&User-Name) { > (0) if (&User-Name) -> TRUE > (0) if (&User-Name) { > (0) if (&User-Name =~ / /) { > (0) if (&User-Name =~ / /) -> FALSE > (0) if (&User-Name =~ /@[^@]*@/ ) { > (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (0) if (&User-Name =~ /\.\./ ) { > (0) if (&User-Name =~ /\.\./ ) -> FALSE > (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (0) if (&User-Name =~ /\.$/) { > (0) if (&User-Name =~ /\.$/) -> FALSE > (0) if (&User-Name =~ /(a)\./) { > (0) if (&User-Name =~ /(a)\./) -> FALSE > (0) } # if (&User-Name) = notfound > (0) } # policy filter_username = notfound > (0) [preprocess] = ok > (0) [chap] = noop > (0) [mschap] = noop > (0) [digest] = noop > (0) suffix: Checking for suffix after "@" > (0) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL > (0) suffix: No such realm "NULL" > (0) [suffix] = noop > (0) eap: Peer sent EAP Response (code 2) ID 103 length 21 > (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the > rest of authorize > (0) [eap] = ok > (0) } # authorize = ok > (0) Found Auth-Type = eap > (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (0) authenticate { > (0) eap: Peer sent packet with method EAP Identity (1) > (0) eap: Calling submodule eap_ttls to process data > (0) eap_ttls: (TLS) Initiating new session > (0) eap: Sending EAP Request (code 1) ID 104 length 6 > (0) eap: EAP session adding &reply:State = 0x33754777331d52c5 > (0) [eap] = handled > (0) } # authenticate = handled > (0) Using Post-Auth-Type Challenge > (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (0) Challenge { ... } # empty sub-section is ignored > (0) session-state: Saving cached attributes > (0) Framed-MTU = 994 > (0) Sent Access-Challenge Id 18 from 10.100.1.65:1812 to 10.100.2.39:54686 > length 64 > (0) EAP-Message = 0x016800061520 > (0) Message-Authenticator = 0x00000000000000000000000000000000 > (0) State = 0x33754777331d52c5d9592c39c6f43193 > (0) Finished request > Waking up in 4.9 seconds. > (1) Received Access-Request Id 19 from 10.100.2.39:54686 to > 10.100.1.65:1812 length 411 > (1) User-Name = "klaus.mustermann" > (1) NAS-IP-Address = 10.100.2.39 > (1) NAS-Identifier = "8283c219e7f9" > (1) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" > (1) NAS-Port-Type = Wireless-802.11 > (1) Service-Type = Framed-User > (1) Calling-Station-Id = "F8-4D-89-6D-CB-AE" > (1) Connect-Info = "CONNECT 0Mbps 802.11b" > (1) Acct-Session-Id = "690B866461ACEC60" > (1) Acct-Multi-Session-Id = "3EA4011978DCDC0A" > (1) Mobility-Domain-Id = 46476 > (1) WLAN-Pairwise-Cipher = 1027076 > (1) WLAN-Group-Cipher = 1027076 > (1) WLAN-AKM-Suite = 1027075 > (1) Framed-MTU = 1400 > (1) EAP-Message = > 0x026800a115800000009716030100920100008e030363ce9a00af0158c4304b8191e349a5c4d7e344c71cf9ceb42fc1dc05eee1d4ea00002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000 > (1) State = 0x33754777331d52c5d9592c39c6f43193 > (1) Message-Authenticator = 0xaf2835db2d901930a1abf923e81f8d4b > (1) Restoring &session-state > (1) &session-state:Framed-MTU = 994 > (1) # Executing section authorize from file > /etc/freeradius/3.0/sites-enabled/default > (1) authorize { > (1) policy filter_username { > (1) if (&User-Name) { > (1) if (&User-Name) -> TRUE > (1) if (&User-Name) { > (1) if (&User-Name =~ / /) { > (1) if (&User-Name =~ / /) -> FALSE > (1) if (&User-Name =~ /@[^@]*@/ ) { > (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (1) if (&User-Name =~ /\.\./ ) { > (1) if (&User-Name =~ /\.\./ ) -> FALSE > (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (1) if (&User-Name =~ /\.$/) { > (1) if (&User-Name =~ /\.$/) -> FALSE > (1) if (&User-Name =~ /(a)\./) { > (1) if (&User-Name =~ /(a)\./) -> FALSE > (1) } # if (&User-Name) = notfound > (1) } # policy filter_username = notfound > (1) [preprocess] = ok > (1) [chap] = noop > (1) [mschap] = noop > (1) [digest] = noop > (1) suffix: Checking for suffix after "@" > (1) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL > (1) suffix: No such realm "NULL" > (1) [suffix] = noop > (1) eap: Peer sent EAP Response (code 2) ID 104 length 161 > (1) eap: Continuing tunnel setup > (1) [eap] = ok > (1) } # authorize = ok > (1) Found Auth-Type = eap > (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (1) authenticate { > (1) eap: Expiring EAP session with state 0x33754777331d52c5 > (1) eap: Finished EAP session with state 0x33754777331d52c5 > (1) eap: Previous EAP request found for state 0x33754777331d52c5, released > from the list > (1) eap: Peer sent packet with method EAP TTLS (21) > (1) eap: Calling submodule eap_ttls to process data > (1) eap_ttls: Authenticate > (1) eap_ttls: (TLS) EAP Peer says that the final record size will be 151 > bytes > (1) eap_ttls: (TLS) EAP Got all data (151 bytes) > (1) eap_ttls: (TLS) Handshake state - before SSL initialization > (1) eap_ttls: (TLS) Handshake state - Server before SSL initialization > (1) eap_ttls: (TLS) Handshake state - Server before SSL initialization > (1) eap_ttls: (TLS) recv TLS 1.3 Handshake, ClientHello > (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client hello > (1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerHello > (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server hello > (1) eap_ttls: (TLS) send TLS 1.2 Handshake, Certificate > (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write certificate > (1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerKeyExchange > (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write key exchange > (1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerHelloDone > (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server done > (1) eap_ttls: (TLS) Server : Need to read more data: SSLv3/TLS write > server done > (1) eap_ttls: (TLS) In Handshake Phase > (1) eap: Sending EAP Request (code 1) ID 105 length 1004 > (1) eap: EAP session adding &reply:State = 0x33754777321c52c5 > (1) [eap] = handled > (1) } # authenticate = handled > (1) Using Post-Auth-Type Challenge > (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (1) Challenge { ... } # empty sub-section is ignored > (1) session-state: Saving cached attributes > (1) Framed-MTU = 994 > (1) Sent Access-Challenge Id 19 from 10.100.1.65:1812 to 10.100.2.39:54686 > length 1068 > (1) EAP-Message = > 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 > (1) Message-Authenticator = 0x00000000000000000000000000000000 > (1) State = 0x33754777321c52c5d9592c39c6f43193 > (1) Finished request > Waking up in 4.8 seconds. > (2) Received Access-Request Id 20 from 10.100.2.39:54686 to > 10.100.1.65:1812 length 256 > (2) User-Name = "klaus.mustermann" > (2) NAS-IP-Address = 10.100.2.39 > (2) NAS-Identifier = "8283c219e7f9" > (2) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" > (2) NAS-Port-Type = Wireless-802.11 > (2) Service-Type = Framed-User > (2) Calling-Station-Id = "F8-4D-89-6D-CB-AE" > (2) Connect-Info = "CONNECT 0Mbps 802.11b" > (2) Acct-Session-Id = "690B866461ACEC60" > (2) Acct-Multi-Session-Id = "3EA4011978DCDC0A" > (2) Mobility-Domain-Id = 46476 > (2) WLAN-Pairwise-Cipher = 1027076 > (2) WLAN-Group-Cipher = 1027076 > (2) WLAN-AKM-Suite = 1027075 > (2) Framed-MTU = 1400 > (2) EAP-Message = 0x026900061500 > (2) State = 0x33754777321c52c5d9592c39c6f43193 > (2) Message-Authenticator = 0x61c34e69e7f5f253a9fdf8868c0f8826 > (2) Restoring &session-state > (2) &session-state:Framed-MTU = 994 > (2) # Executing section authorize from file > /etc/freeradius/3.0/sites-enabled/default > (2) authorize { > (2) policy filter_username { > (2) if (&User-Name) { > (2) if (&User-Name) -> TRUE > (2) if (&User-Name) { > (2) if (&User-Name =~ / /) { > (2) if (&User-Name =~ / /) -> FALSE > (2) if (&User-Name =~ /@[^@]*@/ ) { > (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (2) if (&User-Name =~ /\.\./ ) { > (2) if (&User-Name =~ /\.\./ ) -> FALSE > (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (2) if (&User-Name =~ /\.$/) { > (2) if (&User-Name =~ /\.$/) -> FALSE > (2) if (&User-Name =~ /(a)\./) { > (2) if (&User-Name =~ /(a)\./) -> FALSE > (2) } # if (&User-Name) = notfound > (2) } # policy filter_username = notfound > (2) [preprocess] = ok > (2) [chap] = noop > (2) [mschap] = noop > (2) [digest] = noop > (2) suffix: Checking for suffix after "@" > (2) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL > (2) suffix: No such realm "NULL" > (2) [suffix] = noop > (2) eap: Peer sent EAP Response (code 2) ID 105 length 6 > (2) eap: Continuing tunnel setup > (2) [eap] = ok > (2) } # authorize = ok > (2) Found Auth-Type = eap > (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (2) authenticate { > (2) eap: Expiring EAP session with state 0x33754777321c52c5 > (2) eap: Finished EAP session with state 0x33754777321c52c5 > (2) eap: Previous EAP request found for state 0x33754777321c52c5, released > from the list > (2) eap: Peer sent packet with method EAP TTLS (21) > (2) eap: Calling submodule eap_ttls to process data > (2) eap_ttls: Authenticate > (2) eap_ttls: (TLS) Peer ACKed our handshake fragment > (2) eap: Sending EAP Request (code 1) ID 106 length 1004 > (2) eap: EAP session adding &reply:State = 0x33754777311f52c5 > (2) [eap] = handled > (2) } # authenticate = handled > (2) Using Post-Auth-Type Challenge > (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (2) Challenge { ... } # empty sub-section is ignored > (2) session-state: Saving cached attributes > (2) Framed-MTU = 994 > (2) Sent Access-Challenge Id 20 from 10.100.1.65:1812 to 10.100.2.39:54686 > length 1068 > (2) EAP-Message = > 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 > (2) Message-Authenticator = 0x00000000000000000000000000000000 > (2) State = 0x33754777311f52c5d9592c39c6f43193 > (2) Finished request > Waking up in 4.8 seconds. > (3) Received Access-Request Id 21 from 10.100.2.39:54686 to > 10.100.1.65:1812 length 256 > (3) User-Name = "klaus.mustermann" > (3) NAS-IP-Address = 10.100.2.39 > (3) NAS-Identifier = "8283c219e7f9" > (3) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" > (3) NAS-Port-Type = Wireless-802.11 > (3) Service-Type = Framed-User > (3) Calling-Station-Id = "F8-4D-89-6D-CB-AE" > (3) Connect-Info = "CONNECT 0Mbps 802.11b" > (3) Acct-Session-Id = "690B866461ACEC60" > (3) Acct-Multi-Session-Id = "3EA4011978DCDC0A" > (3) Mobility-Domain-Id = 46476 > (3) WLAN-Pairwise-Cipher = 1027076 > (3) WLAN-Group-Cipher = 1027076 > (3) WLAN-AKM-Suite = 1027075 > (3) Framed-MTU = 1400 > (3) EAP-Message = 0x026a00061500 > (3) State = 0x33754777311f52c5d9592c39c6f43193 > (3) Message-Authenticator = 0xc8e04779851766a986a21ceea4790d00 > (3) Restoring &session-state > (3) &session-state:Framed-MTU = 994 > (3) # Executing section authorize from file > /etc/freeradius/3.0/sites-enabled/default > (3) authorize { > (3) policy filter_username { > (3) if (&User-Name) { > (3) if (&User-Name) -> TRUE > (3) if (&User-Name) { > (3) if (&User-Name =~ / /) { > (3) if (&User-Name =~ / /) -> FALSE > (3) if (&User-Name =~ /@[^@]*@/ ) { > (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (3) if (&User-Name =~ /\.\./ ) { > (3) if (&User-Name =~ /\.\./ ) -> FALSE > (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (3) if (&User-Name =~ /\.$/) { > (3) if (&User-Name =~ /\.$/) -> FALSE > (3) if (&User-Name =~ /(a)\./) { > (3) if (&User-Name =~ /(a)\./) -> FALSE > (3) } # if (&User-Name) = notfound > (3) } # policy filter_username = notfound > (3) [preprocess] = ok > (3) [chap] = noop > (3) [mschap] = noop > (3) [digest] = noop > (3) suffix: Checking for suffix after "@" > (3) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL > (3) suffix: No such realm "NULL" > (3) [suffix] = noop > (3) eap: Peer sent EAP Response (code 2) ID 106 length 6 > (3) eap: Continuing tunnel setup > (3) [eap] = ok > (3) } # authorize = ok > (3) Found Auth-Type = eap > (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (3) authenticate { > (3) eap: Expiring EAP session with state 0x33754777311f52c5 > (3) eap: Finished EAP session with state 0x33754777311f52c5 > (3) eap: Previous EAP request found for state 0x33754777311f52c5, released > from the list > (3) eap: Peer sent packet with method EAP TTLS (21) > (3) eap: Calling submodule eap_ttls to process data > (3) eap_ttls: Authenticate > (3) eap_ttls: (TLS) Peer ACKed our handshake fragment > (3) eap: Sending EAP Request (code 1) ID 107 length 1004 > (3) eap: EAP session adding &reply:State = 0x33754777301e52c5 > (3) [eap] = handled > (3) } # authenticate = handled > (3) Using Post-Auth-Type Challenge > (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (3) Challenge { ... } # empty sub-section is ignored > (3) session-state: Saving cached attributes > (3) Framed-MTU = 994 > (3) Sent Access-Challenge Id 21 from 10.100.1.65:1812 to 10.100.2.39:54686 > length 1068 > (3) EAP-Message = > 0x016b03ec15c0000011516e31183016060355040a130f42756464796272616e6420476d624831293027060355040b132042756464796272616e6420436572746966696361746520417574686f72697479311b30190603550403131242756464796272616e6420526f6f74204341311f301d06092a864886f70d010901161069744062756464796272616e642e6465301e170d3231303432333131353030305a170d3331303432333131353030305a3081bd310b3009060355040613024445310f300d060355040813064265726c696e310f300d060355040713064265726c696e31183016060355040a130f42756464796272616e6420476d624831293027060355040b132042756464796272616e6420436572746966696361746520417574686f72697479312630240603550403131d42756464796272616e6420496e7465726d656469617465204341203034311f301d06092a864886f70d010901161069744062756464796272616e642e646530820222300d06092a > (3) Message-Authenticator = 0x00000000000000000000000000000000 > (3) State = 0x33754777301e52c5d9592c39c6f43193 > (3) Finished request > Waking up in 4.8 seconds. > (4) Received Access-Request Id 22 from 10.100.2.39:54686 to > 10.100.1.65:1812 length 256 > (4) User-Name = "klaus.mustermann" > (4) NAS-IP-Address = 10.100.2.39 > (4) NAS-Identifier = "8283c219e7f9" > (4) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" > (4) NAS-Port-Type = Wireless-802.11 > (4) Service-Type = Framed-User > (4) Calling-Station-Id = "F8-4D-89-6D-CB-AE" > (4) Connect-Info = "CONNECT 0Mbps 802.11b" > (4) Acct-Session-Id = "690B866461ACEC60" > (4) Acct-Multi-Session-Id = "3EA4011978DCDC0A" > (4) Mobility-Domain-Id = 46476 > (4) WLAN-Pairwise-Cipher = 1027076 > (4) WLAN-Group-Cipher = 1027076 > (4) WLAN-AKM-Suite = 1027075 > (4) Framed-MTU = 1400 > (4) EAP-Message = 0x026b00061500 > (4) State = 0x33754777301e52c5d9592c39c6f43193 > (4) Message-Authenticator = 0x8ebe69d74f104b81490506fbfd4fcc22 > (4) Restoring &session-state > (4) &session-state:Framed-MTU = 994 > (4) # Executing section authorize from file > /etc/freeradius/3.0/sites-enabled/default > (4) authorize { > (4) policy filter_username { > (4) if (&User-Name) { > (4) if (&User-Name) -> TRUE > (4) if (&User-Name) { > (4) if (&User-Name =~ / /) { > (4) if (&User-Name =~ / /) -> FALSE > (4) if (&User-Name =~ /@[^@]*@/ ) { > (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (4) if (&User-Name =~ /\.\./ ) { > (4) if (&User-Name =~ /\.\./ ) -> FALSE > (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (4) if (&User-Name =~ /\.$/) { > (4) if (&User-Name =~ /\.$/) -> FALSE > (4) if (&User-Name =~ /(a)\./) { > (4) if (&User-Name =~ /(a)\./) -> FALSE > (4) } # if (&User-Name) = notfound > (4) } # policy filter_username = notfound > (4) [preprocess] = ok > (4) [chap] = noop > (4) [mschap] = noop > (4) [digest] = noop > (4) suffix: Checking for suffix after "@" > (4) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL > (4) suffix: No such realm "NULL" > (4) [suffix] = noop > (4) eap: Peer sent EAP Response (code 2) ID 107 length 6 > (4) eap: Continuing tunnel setup > (4) [eap] = ok > (4) } # authorize = ok > (4) Found Auth-Type = eap > (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (4) authenticate { > (4) eap: Expiring EAP session with state 0x33754777301e52c5 > (4) eap: Finished EAP session with state 0x33754777301e52c5 > (4) eap: Previous EAP request found for state 0x33754777301e52c5, released > from the list > (4) eap: Peer sent packet with method EAP TTLS (21) > (4) eap: Calling submodule eap_ttls to process data > (4) eap_ttls: Authenticate > (4) eap_ttls: (TLS) Peer ACKed our handshake fragment > (4) eap: Sending EAP Request (code 1) ID 108 length 1004 > (4) eap: EAP session adding &reply:State = 0x33754777371952c5 > (4) [eap] = handled > (4) } # authenticate = handled > (4) Using Post-Auth-Type Challenge > (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (4) Challenge { ... } # empty sub-section is ignored > (4) session-state: Saving cached attributes > (4) Framed-MTU = 994 > (4) Sent Access-Challenge Id 22 from 10.100.1.65:1812 to 10.100.2.39:54686 > length 1068 > (4) EAP-Message = > 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 > (4) Message-Authenticator = 0x00000000000000000000000000000000 > (4) State = 0x33754777371952c5d9592c39c6f43193 > (4) Finished request > Waking up in 4.7 seconds. > (5) Received Access-Request Id 23 from 10.100.2.39:54686 to > 10.100.1.65:1812 length 256 > (5) User-Name = "klaus.mustermann" > (5) NAS-IP-Address = 10.100.2.39 > (5) NAS-Identifier = "8283c219e7f9" > (5) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" > (5) NAS-Port-Type = Wireless-802.11 > (5) Service-Type = Framed-User > (5) Calling-Station-Id = "F8-4D-89-6D-CB-AE" > (5) Connect-Info = "CONNECT 0Mbps 802.11b" > (5) Acct-Session-Id = "690B866461ACEC60" > (5) Acct-Multi-Session-Id = "3EA4011978DCDC0A" > (5) Mobility-Domain-Id = 46476 > (5) WLAN-Pairwise-Cipher = 1027076 > (5) WLAN-Group-Cipher = 1027076 > (5) WLAN-AKM-Suite = 1027075 > (5) Framed-MTU = 1400 > (5) EAP-Message = 0x026c00061500 > (5) State = 0x33754777371952c5d9592c39c6f43193 > (5) Message-Authenticator = 0x2954664567eb90b58df983559fafc7ef > (5) Restoring &session-state > (5) &session-state:Framed-MTU = 994 > (5) # Executing section authorize from file > /etc/freeradius/3.0/sites-enabled/default > (5) authorize { > (5) policy filter_username { > (5) if (&User-Name) { > (5) if (&User-Name) -> TRUE > (5) if (&User-Name) { > (5) if (&User-Name =~ / /) { > (5) if (&User-Name =~ / /) -> FALSE > (5) if (&User-Name =~ /@[^@]*@/ ) { > (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (5) if (&User-Name =~ /\.\./ ) { > (5) if (&User-Name =~ /\.\./ ) -> FALSE > (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (5) if (&User-Name =~ /\.$/) { > (5) if (&User-Name =~ /\.$/) -> FALSE > (5) if (&User-Name =~ /(a)\./) { > (5) if (&User-Name =~ /(a)\./) -> FALSE > (5) } # if (&User-Name) = notfound > (5) } # policy filter_username = notfound > (5) [preprocess] = ok > (5) [chap] = noop > (5) [mschap] = noop > (5) [digest] = noop > (5) suffix: Checking for suffix after "@" > (5) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL > (5) suffix: No such realm "NULL" > (5) [suffix] = noop > (5) eap: Peer sent EAP Response (code 2) ID 108 length 6 > (5) eap: Continuing tunnel setup > (5) [eap] = ok > (5) } # authorize = ok > (5) Found Auth-Type = eap > (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (5) authenticate { > (5) eap: Expiring EAP session with state 0x33754777371952c5 > (5) eap: Finished EAP session with state 0x33754777371952c5 > (5) eap: Previous EAP request found for state 0x33754777371952c5, released > from the list > (5) eap: Peer sent packet with method EAP TTLS (21) > (5) eap: Calling submodule eap_ttls to process data > (5) eap_ttls: Authenticate > (5) eap_ttls: (TLS) Peer ACKed our handshake fragment > (5) eap: Sending EAP Request (code 1) ID 109 length 467 > (5) eap: EAP session adding &reply:State = 0x33754777361852c5 > (5) [eap] = handled > (5) } # authenticate = handled > (5) Using Post-Auth-Type Challenge > (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (5) Challenge { ... } # empty sub-section is ignored > (5) session-state: Saving cached attributes > (5) Framed-MTU = 994 > (5) Sent Access-Challenge Id 23 from 10.100.1.65:1812 to 10.100.2.39:54686 > length 527 > (5) EAP-Message = > 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 > (5) Message-Authenticator = 0x00000000000000000000000000000000 > (5) State = 0x33754777361852c5d9592c39c6f43193 > (5) Finished request > Waking up in 4.7 seconds. > (6) Received Access-Request Id 24 from 10.100.2.39:54686 to > 10.100.1.65:1812 length 386 > (6) User-Name = "klaus.mustermann" > (6) NAS-IP-Address = 10.100.2.39 > (6) NAS-Identifier = "8283c219e7f9" > (6) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" > (6) NAS-Port-Type = Wireless-802.11 > (6) Service-Type = Framed-User > (6) Calling-Station-Id = "F8-4D-89-6D-CB-AE" > (6) Connect-Info = "CONNECT 0Mbps 802.11b" > (6) Acct-Session-Id = "690B866461ACEC60" > (6) Acct-Multi-Session-Id = "3EA4011978DCDC0A" > (6) Mobility-Domain-Id = 46476 > (6) WLAN-Pairwise-Cipher = 1027076 > (6) WLAN-Group-Cipher = 1027076 > (6) WLAN-AKM-Suite = 1027075 > (6) Framed-MTU = 1400 > (6) EAP-Message = > 0x026d008815800000007e16030300461000004241041bdfa74e961e11ce04aae11e59adff899c7e45c93c23a868913c8e6dbc6b61c8c93027484c43331a120609e34bb63d4a01335611c152662eda522aa015747d24140303000101160303002896671043239b41663014b73a88eb2b056a398cc8c31e8c6f1940273f2cc64b884907fe10b3c697de > (6) State = 0x33754777361852c5d9592c39c6f43193 > (6) Message-Authenticator = 0x02f8f3ac8779506b6dc11ac581eb8a01 > (6) Restoring &session-state > (6) &session-state:Framed-MTU = 994 > (6) # Executing section authorize from file > /etc/freeradius/3.0/sites-enabled/default > (6) authorize { > (6) policy filter_username { > (6) if (&User-Name) { > (6) if (&User-Name) -> TRUE > (6) if (&User-Name) { > (6) if (&User-Name =~ / /) { > (6) if (&User-Name =~ / /) -> FALSE > (6) if (&User-Name =~ /@[^@]*@/ ) { > (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (6) if (&User-Name =~ /\.\./ ) { > (6) if (&User-Name =~ /\.\./ ) -> FALSE > (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (6) if (&User-Name =~ /\.$/) { > (6) if (&User-Name =~ /\.$/) -> FALSE > (6) if (&User-Name =~ /(a)\./) { > (6) if (&User-Name =~ /(a)\./) -> FALSE > (6) } # if (&User-Name) = notfound > (6) } # policy filter_username = notfound > (6) [preprocess] = ok > (6) [chap] = noop > (6) [mschap] = noop > (6) [digest] = noop > (6) suffix: Checking for suffix after "@" > (6) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL > (6) suffix: No such realm "NULL" > (6) [suffix] = noop > (6) eap: Peer sent EAP Response (code 2) ID 109 length 136 > (6) eap: Continuing tunnel setup > (6) [eap] = ok > (6) } # authorize = ok > (6) Found Auth-Type = eap > (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (6) authenticate { > (6) eap: Expiring EAP session with state 0x33754777361852c5 > (6) eap: Finished EAP session with state 0x33754777361852c5 > (6) eap: Previous EAP request found for state 0x33754777361852c5, released > from the list > (6) eap: Peer sent packet with method EAP TTLS (21) > (6) eap: Calling submodule eap_ttls to process data > (6) eap_ttls: Authenticate > (6) eap_ttls: (TLS) EAP Peer says that the final record size will be 126 > bytes > (6) eap_ttls: (TLS) EAP Got all data (126 bytes) > (6) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server done > (6) eap_ttls: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange > (6) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client key > exchange > (6) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read change cipher > spec > (6) eap_ttls: (TLS) recv TLS 1.2 Handshake, Finished > (6) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read finished > (6) eap_ttls: (TLS) send TLS 1.2 ChangeCipherSpec > (6) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write change cipher > spec > (6) eap_ttls: (TLS) send TLS 1.2 Handshake, Finished > (6) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write finished > (6) eap_ttls: (TLS) Handshake state - SSL negotiation finished successfully > (6) eap_ttls: (TLS) Connection Established > (6) eap_ttls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" > (6) eap_ttls: TLS-Session-Version = "TLS 1.2" > (6) eap: Sending EAP Request (code 1) ID 110 length 61 > (6) eap: EAP session adding &reply:State = 0x33754777351b52c5 > (6) [eap] = handled > (6) } # authenticate = handled > (6) Using Post-Auth-Type Challenge > (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (6) Challenge { ... } # empty sub-section is ignored > (6) session-state: Saving cached attributes > (6) Framed-MTU = 994 > (6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" > (6) TLS-Session-Version = "TLS 1.2" > (6) Sent Access-Challenge Id 24 from 10.100.1.65:1812 to 10.100.2.39:54686 > length 119 > (6) EAP-Message = > 0x016e003d1580000000331403030001011603030028c5e315035630988a3b83c13d63026f7f68b51fc4cae498e85bec63a7b3beba6177951acbd7c9e48e > (6) Message-Authenticator = 0x00000000000000000000000000000000 > (6) State = 0x33754777351b52c5d9592c39c6f43193 > (6) Finished request > Waking up in 4.7 seconds. > (7) Received Access-Request Id 25 from 10.100.2.39:54686 to > 10.100.1.65:1812 length 321 > (7) User-Name = "klaus.mustermann" > (7) NAS-IP-Address = 10.100.2.39 > (7) NAS-Identifier = "8283c219e7f9" > (7) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" > (7) NAS-Port-Type = Wireless-802.11 > (7) Service-Type = Framed-User > (7) Calling-Station-Id = "F8-4D-89-6D-CB-AE" > (7) Connect-Info = "CONNECT 0Mbps 802.11b" > (7) Acct-Session-Id = "690B866461ACEC60" > (7) Acct-Multi-Session-Id = "3EA4011978DCDC0A" > (7) Mobility-Domain-Id = 46476 > (7) WLAN-Pairwise-Cipher = 1027076 > (7) WLAN-Group-Cipher = 1027076 > (7) WLAN-AKM-Suite = 1027075 > (7) Framed-MTU = 1400 > (7) EAP-Message = > 0x026e004715800000003d170303003896671043239b4167e00afbeca8b555b120c23769698d81a6b5a879ecc3c8fd3cd740dc135bdef5fcadd7fda6a166609e4d7957502348d9f3 > (7) State = 0x33754777351b52c5d9592c39c6f43193 > (7) Message-Authenticator = 0xa8b841519028def71e27cfef249be756 > (7) Restoring &session-state > (7) &session-state:Framed-MTU = 994 > (7) &session-state:TLS-Session-Cipher-Suite = > "ECDHE-RSA-AES256-GCM-SHA384" > (7) &session-state:TLS-Session-Version = "TLS 1.2" > (7) # Executing section authorize from file > /etc/freeradius/3.0/sites-enabled/default > (7) authorize { > (7) policy filter_username { > (7) if (&User-Name) { > (7) if (&User-Name) -> TRUE > (7) if (&User-Name) { > (7) if (&User-Name =~ / /) { > (7) if (&User-Name =~ / /) -> FALSE > (7) if (&User-Name =~ /@[^@]*@/ ) { > (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (7) if (&User-Name =~ /\.\./ ) { > (7) if (&User-Name =~ /\.\./ ) -> FALSE > (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (7) if (&User-Name =~ /\.$/) { > (7) if (&User-Name =~ /\.$/) -> FALSE > (7) if (&User-Name =~ /(a)\./) { > (7) if (&User-Name =~ /(a)\./) -> FALSE > (7) } # if (&User-Name) = notfound > (7) } # policy filter_username = notfound > (7) [preprocess] = ok > (7) [chap] = noop > (7) [mschap] = noop > (7) [digest] = noop > (7) suffix: Checking for suffix after "@" > (7) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL > (7) suffix: No such realm "NULL" > (7) [suffix] = noop > (7) eap: Peer sent EAP Response (code 2) ID 110 length 71 > (7) eap: Continuing tunnel setup > (7) [eap] = ok > (7) } # authorize = ok > (7) Found Auth-Type = eap > (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (7) authenticate { > (7) eap: Expiring EAP session with state 0x33754777351b52c5 > (7) eap: Finished EAP session with state 0x33754777351b52c5 > (7) eap: Previous EAP request found for state 0x33754777351b52c5, released > from the list > (7) eap: Peer sent packet with method EAP TTLS (21) > (7) eap: Calling submodule eap_ttls to process data > (7) eap_ttls: Authenticate > (7) eap_ttls: (TLS) EAP Peer says that the final record size will be 61 > bytes > (7) eap_ttls: (TLS) EAP Got all data (61 bytes) > (7) eap_ttls: Session established. Proceeding to decode tunneled > attributes > (7) eap_ttls: Got tunneled request > (7) eap_ttls: EAP-Message = 0x02000015016b6c6175732e6d75737465726d616e6e > (7) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 > (7) eap_ttls: Got tunneled identity of klaus.mustermann > (7) eap_ttls: Setting default EAP type for tunneled EAP session > (7) eap_ttls: Sending tunneled request > (7) Virtual server inner-tunnel received request > (7) EAP-Message = 0x02000015016b6c6175732e6d75737465726d616e6e > (7) FreeRADIUS-Proxied-To = 127.0.0.1 > (7) User-Name = "klaus.mustermann" > (7) WARNING: Outer and inner identities are the same. User privacy is > compromised. > (7) server inner-tunnel { > (7) # Executing section authorize from file > /etc/freeradius/3.0/sites-enabled/inner-tunnel > (7) authorize { > (7) policy filter_username { > (7) if (&User-Name) { > (7) if (&User-Name) -> TRUE > (7) if (&User-Name) { > (7) if (&User-Name =~ / /) { > (7) if (&User-Name =~ / /) -> FALSE > (7) if (&User-Name =~ /@[^@]*@/ ) { > (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (7) if (&User-Name =~ /\.\./ ) { > (7) if (&User-Name =~ /\.\./ ) -> FALSE > (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (7) if (&User-Name =~ /\.$/) { > (7) if (&User-Name =~ /\.$/) -> FALSE > (7) if (&User-Name =~ /(a)\./) { > (7) if (&User-Name =~ /(a)\./) -> FALSE > (7) } # if (&User-Name) = notfound > (7) } # policy filter_username = notfound > (7) [chap] = noop > (7) [mschap] = noop > (7) suffix: Checking for suffix after "@" > (7) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL > (7) suffix: No such realm "NULL" > (7) [suffix] = noop > (7) update control { > (7) &Proxy-To-Realm := LOCAL > (7) } # update control = noop > (7) eap: Peer sent EAP Response (code 2) ID 0 length 21 > (7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the > rest of authorize > (7) [eap] = ok > (7) } # authorize = ok > (7) Found Auth-Type = eap > (7) # Executing group from file > /etc/freeradius/3.0/sites-enabled/inner-tunnel > (7) authenticate { > (7) eap: Peer sent packet with method EAP Identity (1) > (7) eap: Calling submodule eap_gtc to process data > (7) eap_gtc: EXPAND Password: > (7) eap_gtc: --> Password: > (7) eap: Sending EAP Request (code 1) ID 1 length 15 > (7) eap: EAP session adding &reply:State = 0xb4a2b867b4a3bebf > (7) [eap] = handled > (7) } # authenticate = handled > (7) } # server inner-tunnel > (7) Virtual server sending reply > (7) EAP-Message = 0x0101000f0650617373776f72643a20 > (7) Message-Authenticator = 0x00000000000000000000000000000000 > (7) State = 0xb4a2b867b4a3bebfd5edaac839855c28 > (7) eap_ttls: Got tunneled Access-Challenge > (7) eap: Sending EAP Request (code 1) ID 111 length 63 > (7) eap: EAP session adding &reply:State = 0x33754777341a52c5 > (7) [eap] = handled > (7) } # authenticate = handled > (7) Using Post-Auth-Type Challenge > (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (7) Challenge { ... } # empty sub-section is ignored > (7) session-state: Saving cached attributes > (7) Framed-MTU = 994 > (7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" > (7) TLS-Session-Version = "TLS 1.2" > (7) Sent Access-Challenge Id 25 from 10.100.1.65:1812 to 10.100.2.39:54686 > length 121 > (7) EAP-Message = > 0x016f003f1580000000351703030030c5e315035630988b4ad830befda4dba2a51fa8f9388f8da63a7ea11b76e432bbb988ecf99f49e2ebe5cd501621aec81b > (7) Message-Authenticator = 0x00000000000000000000000000000000 > (7) State = 0x33754777341a52c5d9592c39c6f43193 > (7) Finished request > Waking up in 4.6 seconds. > (8) Received Access-Request Id 26 from 10.100.2.39:54686 to > 10.100.1.65:1812 length 317 > (8) User-Name = "klaus.mustermann" > (8) NAS-IP-Address = 10.100.2.39 > (8) NAS-Identifier = "8283c219e7f9" > (8) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" > (8) NAS-Port-Type = Wireless-802.11 > (8) Service-Type = Framed-User > (8) Calling-Station-Id = "F8-4D-89-6D-CB-AE" > (8) Connect-Info = "CONNECT 0Mbps 802.11b" > (8) Acct-Session-Id = "690B866461ACEC60" > (8) Acct-Multi-Session-Id = "3EA4011978DCDC0A" > (8) Mobility-Domain-Id = 46476 > (8) WLAN-Pairwise-Cipher = 1027076 > (8) WLAN-Group-Cipher = 1027076 > (8) WLAN-AKM-Suite = 1027075 > (8) Framed-MTU = 1400 > (8) EAP-Message = > 0x026f0043158000000039170303003496671043239b41683128359379c1a6a7ff944f84eb0b3f626e65ecb31042ebf597e0b5314226e2bcea13a41d6e380c98153d5dd7 > (8) State = 0x33754777341a52c5d9592c39c6f43193 > (8) Message-Authenticator = 0xe468605d47fb0bba1b52f632f0e1589a > (8) Restoring &session-state > (8) &session-state:Framed-MTU = 994 > (8) &session-state:TLS-Session-Cipher-Suite = > "ECDHE-RSA-AES256-GCM-SHA384" > (8) &session-state:TLS-Session-Version = "TLS 1.2" > (8) # Executing section authorize from file > /etc/freeradius/3.0/sites-enabled/default > (8) authorize { > (8) policy filter_username { > (8) if (&User-Name) { > (8) if (&User-Name) -> TRUE > (8) if (&User-Name) { > (8) if (&User-Name =~ / /) { > (8) if (&User-Name =~ / /) -> FALSE > (8) if (&User-Name =~ /@[^@]*@/ ) { > (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (8) if (&User-Name =~ /\.\./ ) { > (8) if (&User-Name =~ /\.\./ ) -> FALSE > (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (8) if (&User-Name =~ /\.$/) { > (8) if (&User-Name =~ /\.$/) -> FALSE > (8) if (&User-Name =~ /(a)\./) { > (8) if (&User-Name =~ /(a)\./) -> FALSE > (8) } # if (&User-Name) = notfound > (8) } # policy filter_username = notfound > (8) [preprocess] = ok > (8) [chap] = noop > (8) [mschap] = noop > (8) [digest] = noop > (8) suffix: Checking for suffix after "@" > (8) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL > (8) suffix: No such realm "NULL" > (8) [suffix] = noop > (8) eap: Peer sent EAP Response (code 2) ID 111 length 67 > (8) eap: Continuing tunnel setup > (8) [eap] = ok > (8) } # authorize = ok > (8) Found Auth-Type = eap > (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (8) authenticate { > (8) eap: Expiring EAP session with state 0xb4a2b867b4a3bebf > (8) eap: Finished EAP session with state 0x33754777341a52c5 > (8) eap: Previous EAP request found for state 0x33754777341a52c5, released > from the list > (8) eap: Peer sent packet with method EAP TTLS (21) > (8) eap: Calling submodule eap_ttls to process data > (8) eap_ttls: Authenticate > (8) eap_ttls: (TLS) EAP Peer says that the final record size will be 57 > bytes > (8) eap_ttls: (TLS) EAP Got all data (57 bytes) > (8) eap_ttls: Session established. Proceeding to decode tunneled > attributes > (8) eap_ttls: Got tunneled request > (8) eap_ttls: EAP-Message = 0x0201001306736167616e382e53697a61626c65 > (8) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 > (8) eap_ttls: Sending tunneled request > (8) Virtual server inner-tunnel received request > (8) EAP-Message = 0x0201001306736167616e382e53697a61626c65 > (8) FreeRADIUS-Proxied-To = 127.0.0.1 > (8) User-Name = "klaus.mustermann" > (8) State = 0xb4a2b867b4a3bebfd5edaac839855c28 > (8) WARNING: Outer and inner identities are the same. User privacy is > compromised. > (8) server inner-tunnel { > (8) session-state: No cached attributes > (8) # Executing section authorize from file > /etc/freeradius/3.0/sites-enabled/inner-tunnel > (8) authorize { > (8) policy filter_username { > (8) if (&User-Name) { > (8) if (&User-Name) -> TRUE > (8) if (&User-Name) { > (8) if (&User-Name =~ / /) { > (8) if (&User-Name =~ / /) -> FALSE > (8) if (&User-Name =~ /@[^@]*@/ ) { > (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (8) if (&User-Name =~ /\.\./ ) { > (8) if (&User-Name =~ /\.\./ ) -> FALSE > (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (8) if (&User-Name =~ /\.$/) { > (8) if (&User-Name =~ /\.$/) -> FALSE > (8) if (&User-Name =~ /(a)\./) { > (8) if (&User-Name =~ /(a)\./) -> FALSE > (8) } # if (&User-Name) = notfound > (8) } # policy filter_username = notfound > (8) [chap] = noop > (8) [mschap] = noop > (8) suffix: Checking for suffix after "@" > (8) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL > (8) suffix: No such realm "NULL" > (8) [suffix] = noop > (8) update control { > (8) &Proxy-To-Realm := LOCAL > (8) } # update control = noop > (8) eap: Peer sent EAP Response (code 2) ID 1 length 19 > (8) eap: No EAP Start, assuming it's an on-going EAP conversation > (8) [eap] = updated > (8) [files] = noop > rlm_ldap (ldap): Reserved connection (0) > (8) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) > (8) ldap: --> (uid=klaus.mustermann) > (8) ldap: Performing search in "dc=pretendco,dc=de" with filter > "(uid=klaus.mustermann)", scope "sub" > (8) ldap: Waiting for search result... > (8) ldap: User object found at DN "uid=klaus.mustermann,ou=Standard > Mitarbeiter,ou=Mitarbeiter,ou=Users,dc=pretendco,dc=de" > (8) ldap: Processing user attributes > (8) ldap: WARNING: No "known good" password added. Ensure the admin user > has permission to read the password attribute > (8) ldap: WARNING: PAP authentication will *NOT* work with Active > Directory (if that is what you were trying to configure) > rlm_ldap (ldap): Released connection (0) > Need more connections to reach 10 spares > rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots > used > rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 > rlm_ldap (ldap): Waiting for bind result... > ber_get_next failed, errno=11. > rlm_ldap (ldap): Bind successful > (8) [ldap] = ok > (8) [expiration] = noop > (8) [logintime] = noop > (8) [pap] = noop > (8) if (User-Password) { > (8) if (User-Password) -> FALSE > (8) } # authorize = updated > (8) Found Auth-Type = eap > (8) # Executing group from file > /etc/freeradius/3.0/sites-enabled/inner-tunnel > (8) authenticate { > (8) eap: Expiring EAP session with state 0xb4a2b867b4a3bebf > (8) eap: Finished EAP session with state 0xb4a2b867b4a3bebf > (8) eap: Previous EAP request found for state 0xb4a2b867b4a3bebf, released > from the list > (8) eap: Peer sent packet with method EAP GTC (6) > (8) eap: Calling submodule eap_gtc to process data > (8) eap_gtc: # Executing group from file > /etc/freeradius/3.0/sites-enabled/inner-tunnel > (8) eap_gtc: Auth-Type PAP { > rlm_ldap (ldap): Reserved connection (1) > (8) ldap: Login attempt by "klaus.mustermann" > (8) ldap: Using user DN from request "uid=klaus.mustermann,ou=Standard > Mitarbeiter,ou=Mitarbeiter,ou=Users,dc=pretendco,dc=de" > (8) ldap: Waiting for bind result... > (8) ldap: Bind successful > (8) ldap: Bind as user "uid=klaus.mustermann,ou=Standard > Mitarbeiter,ou=Mitarbeiter,ou=Users,dc=pretendco,dc=de" was successful > rlm_ldap (ldap): Released connection (1) > Need more connections to reach 10 spares > rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots > used > rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636 > rlm_ldap (ldap): Waiting for bind result... > ber_get_next failed, errno=11. > rlm_ldap (ldap): Bind successful > (8) eap_gtc: [ldap] = ok > (8) eap_gtc: } # Auth-Type PAP = ok > (8) eap: Sending EAP Success (code 3) ID 1 length 4 > (8) eap: Freeing handler > (8) [eap] = ok > (8) } # authenticate = ok > (8) # Executing section post-auth from file > /etc/freeradius/3.0/sites-enabled/inner-tunnel > (8) post-auth { > (8) if (0) { > (8) if (0) -> FALSE > (8) } # post-auth = noop > (8) } # server inner-tunnel > (8) Virtual server sending reply > (8) EAP-Message = 0x03010004 > (8) Message-Authenticator = 0x00000000000000000000000000000000 > (8) User-Name = "klaus.mustermann" > (8) eap_ttls: Got tunneled Access-Accept > (8) eap: Sending EAP Success (code 3) ID 111 length 4 > (8) eap: Freeing handler > (8) [eap] = ok > (8) } # authenticate = ok > (8) # Executing section post-auth from file > /etc/freeradius/3.0/sites-enabled/default > (8) post-auth { > (8) if (session-state:User-Name && reply:User-Name && > request:User-Name && (reply:User-Name == request:User-Name)) { > (8) if (session-state:User-Name && reply:User-Name && > request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE > (8) update { > (8) &reply::Framed-MTU += &session-state:Framed-MTU[*] -> 994 > (8) &reply::TLS-Session-Cipher-Suite += > &session-state:TLS-Session-Cipher-Suite[*] -> 'ECDHE-RSA-AES256-GCM-SHA384' > (8) &reply::TLS-Session-Version += > &session-state:TLS-Session-Version[*] -> 'TLS 1.2' > (8) } # update = noop > (8) [exec] = noop > (8) policy remove_reply_message_if_eap { > (8) if (&reply:EAP-Message && &reply:Reply-Message) { > (8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE > (8) else { > (8) [noop] = noop > (8) } # else = noop > (8) } # policy remove_reply_message_if_eap = noop > (8) } # post-auth = noop > (8) Sent Access-Accept Id 26 from 10.100.1.65:1812 to 10.100.2.39:54686 > length 184 > (8) MS-MPPE-Recv-Key = > 0xeb472d316fdc874c9b4fab09804dffb9627d034a793910ca0f276473f2db3e62 > (8) MS-MPPE-Send-Key = > 0x3cde6513ea1f92c64ee3d938a85980091ecccdeb288c640f958a8f0d4324af64 > (8) EAP-Message = 0x036f0004 > (8) Message-Authenticator = 0x00000000000000000000000000000000 > (8) User-Name = "klaus.mustermann" > (8) Framed-MTU += 994 > (8) Finished request > Waking up in 1.1 seconds. > (9) Received Access-Request Id 26 from 10.100.2.39:38737 to > 10.100.1.65:1812 length 317 > (9) User-Name = "klaus.mustermann" > (9) NAS-IP-Address = 10.100.2.39 > (9) NAS-Identifier = "8283c219e7f9" > (9) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" > (9) NAS-Port-Type = Wireless-802.11 > (9) Service-Type = Framed-User > (9) Calling-Station-Id = "F8-4D-89-6D-CB-AE" > (9) Connect-Info = "CONNECT 0Mbps 802.11b" > (9) Acct-Session-Id = "690B866461ACEC60" > (9) Acct-Multi-Session-Id = "3EA4011978DCDC0A" > (9) Mobility-Domain-Id = 46476 > (9) WLAN-Pairwise-Cipher = 1027076 > (9) WLAN-Group-Cipher = 1027076 > (9) WLAN-AKM-Suite = 1027075 > (9) Framed-MTU = 1400 > (9) EAP-Message = > 0x026f0043158000000039170303003496671043239b41683128359379c1a6a7ff944f84eb0b3f626e65ecb31042ebf597e0b5314226e2bcea13a41d6e380c98153d5dd7 > (9) State = 0x33754777341a52c5d9592c39c6f43193 > (9) Message-Authenticator = 0xe468605d47fb0bba1b52f632f0e1589a > (9) session-state: No cached attributes > (9) # Executing section authorize from file > /etc/freeradius/3.0/sites-enabled/default > (9) authorize { > (9) policy filter_username { > (9) if (&User-Name) { > (9) if (&User-Name) -> TRUE > (9) if (&User-Name) { > (9) if (&User-Name =~ / /) { > (9) if (&User-Name =~ / /) -> FALSE > (9) if (&User-Name =~ /@[^@]*@/ ) { > (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (9) if (&User-Name =~ /\.\./ ) { > (9) if (&User-Name =~ /\.\./ ) -> FALSE > (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (9) if (&User-Name =~ /\.$/) { > (9) if (&User-Name =~ /\.$/) -> FALSE > (9) if (&User-Name =~ /(a)\./) { > (9) if (&User-Name =~ /(a)\./) -> FALSE > (9) } # if (&User-Name) = notfound > (9) } # policy filter_username = notfound > (9) [preprocess] = ok > (9) [chap] = noop > (9) [mschap] = noop > (9) [digest] = noop > (9) suffix: Checking for suffix after "@" > (9) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm NULL > (9) suffix: No such realm "NULL" > (9) [suffix] = noop > (9) eap: Peer sent EAP Response (code 2) ID 111 length 67 > (9) eap: Continuing tunnel setup > (9) [eap] = ok > (9) } # authorize = ok > (9) Found Auth-Type = eap > (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (9) authenticate { > (9) eap: ERROR: rlm_eap (EAP): No EAP session matching state > 0x33754777341a52c5 > (9) eap: Either EAP-request timed out OR EAP-response to an unknown > EAP-request > (9) eap: Failed in handler > (9) [eap] = invalid > (9) } # authenticate = invalid > (9) Failed to authenticate the user > (9) Using Post-Auth-Type Reject > (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (9) Post-Auth-Type REJECT { > (9) attr_filter.access_reject: EXPAND %{User-Name} > (9) attr_filter.access_reject: --> klaus.mustermann > (9) attr_filter.access_reject: Matched entry DEFAULT at line 11 > (9) [attr_filter.access_reject] = updated > (9) eap: ERROR: rlm_eap (EAP): No EAP session matching state > 0x33754777341a52c5 > (9) eap: Either EAP-request timed out OR EAP-response to an unknown > EAP-request > (9) eap: Failed to get handler, probably already removed, not inserting > EAP-Failure > (9) [eap] = noop > (9) policy remove_reply_message_if_eap { > (9) if (&reply:EAP-Message && &reply:Reply-Message) { > (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE > (9) else { > (9) [noop] = noop > (9) } # else = noop > (9) } # policy remove_reply_message_if_eap = noop > (9) } # Post-Auth-Type REJECT = updated > (9) Delaying response for 1.000000 seconds > Waking up in 0.3 seconds. > Waking up in 0.6 seconds. > (10) Received Access-Request Id 26 from 10.100.2.39:45497 to > 10.100.1.65:1812 length 317 > (10) User-Name = "klaus.mustermann" > (10) NAS-IP-Address = 10.100.2.39 > (10) NAS-Identifier = "8283c219e7f9" > (10) Called-Station-Id = "82-83-C2-19-E7-F9:pretendco_int" > (10) NAS-Port-Type = Wireless-802.11 > (10) Service-Type = Framed-User > (10) Calling-Station-Id = "F8-4D-89-6D-CB-AE" > (10) Connect-Info = "CONNECT 0Mbps 802.11b" > (10) Acct-Session-Id = "690B866461ACEC60" > (10) Acct-Multi-Session-Id = "3EA4011978DCDC0A" > (10) Mobility-Domain-Id = 46476 > (10) WLAN-Pairwise-Cipher = 1027076 > (10) WLAN-Group-Cipher = 1027076 > (10) WLAN-AKM-Suite = 1027075 > (10) Framed-MTU = 1400 > (10) EAP-Message = > 0x026f0043158000000039170303003496671043239b41683128359379c1a6a7ff944f84eb0b3f626e65ecb31042ebf597e0b5314226e2bcea13a41d6e380c98153d5dd7 > (10) State = 0x33754777341a52c5d9592c39c6f43193 > (10) Message-Authenticator = 0xe468605d47fb0bba1b52f632f0e1589a > (10) session-state: No cached attributes > (10) # Executing section authorize from file > /etc/freeradius/3.0/sites-enabled/default > (10) authorize { > (10) policy filter_username { > (10) if (&User-Name) { > (10) if (&User-Name) -> TRUE > (10) if (&User-Name) { > (10) if (&User-Name =~ / /) { > (10) if (&User-Name =~ / /) -> FALSE > (10) if (&User-Name =~ /@[^@]*@/ ) { > (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (10) if (&User-Name =~ /\.\./ ) { > (10) if (&User-Name =~ /\.\./ ) -> FALSE > (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (10) if (&User-Name =~ /\.$/) { > (10) if (&User-Name =~ /\.$/) -> FALSE > (10) if (&User-Name =~ /(a)\./) { > (10) if (&User-Name =~ /(a)\./) -> FALSE > (10) } # if (&User-Name) = notfound > (10) } # policy filter_username = notfound > (10) [preprocess] = ok > (10) [chap] = noop > (10) [mschap] = noop > (10) [digest] = noop > (10) suffix: Checking for suffix after "@" > (10) suffix: No '@' in User-Name = "klaus.mustermann", looking up realm > NULL > (10) suffix: No such realm "NULL" > (10) [suffix] = noop > (10) eap: Peer sent EAP Response (code 2) ID 111 length 67 > (10) eap: Continuing tunnel setup > (10) [eap] = ok > (10) } # authorize = ok > (10) Found Auth-Type = eap > (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (10) authenticate { > (10) eap: ERROR: rlm_eap (EAP): No EAP session matching state > 0x33754777341a52c5 > (10) eap: Either EAP-request timed out OR EAP-response to an unknown > EAP-request > (10) eap: Failed in handler > (10) [eap] = invalid > (10) } # authenticate = invalid > (10) Failed to authenticate the user > (10) Using Post-Auth-Type Reject > (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default > (10) Post-Auth-Type REJECT { > (10) attr_filter.access_reject: EXPAND %{User-Name} > (10) attr_filter.access_reject: --> klaus.mustermann > (10) attr_filter.access_reject: Matched entry DEFAULT at line 11 > (10) [attr_filter.access_reject] = updated > (10) eap: ERROR: rlm_eap (EAP): No EAP session matching state > 0x33754777341a52c5 > (10) eap: Either EAP-request timed out OR EAP-response to an unknown > EAP-request > (10) eap: Failed to get handler, probably already removed, not inserting > EAP-Failure > (10) [eap] = noop > (10) policy remove_reply_message_if_eap { > (10) if (&reply:EAP-Message && &reply:Reply-Message) { > (10) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE > (10) else { > (10) [noop] = noop > (10) } # else = noop > (10) } # policy remove_reply_message_if_eap = noop > (10) } # Post-Auth-Type REJECT = updated > (10) Delaying response for 1.000000 seconds > Waking up in 0.3 seconds. > Waking up in 0.2 seconds. > (9) Sending delayed response > (9) Sent Access-Reject Id 26 from 10.100.1.65:1812 to 10.100.2.39:38737 > length 20 > Waking up in 0.1 seconds. > (0) Cleaning up request packet ID 18 with timestamp +35 due to > cleanup_delay was reached > Waking up in 0.1 seconds. > (1) Cleaning up request packet ID 19 with timestamp +35 due to > cleanup_delay was reached > (2) Cleaning up request packet ID 20 with timestamp +35 due to > cleanup_delay was reached > (3) Cleaning up request packet ID 21 with timestamp +35 due to > cleanup_delay was reached > (4) Cleaning up request packet ID 22 with timestamp +35 due to > cleanup_delay was reached > (5) Cleaning up request packet ID 23 with timestamp +35 due to > cleanup_delay was reached > (6) Cleaning up request packet ID 24 with timestamp +35 due to > cleanup_delay was reached > (7) Cleaning up request packet ID 25 with timestamp +35 due to > cleanup_delay was reached > (10) Sending delayed response > (10) Sent Access-Reject Id 26 from 10.100.1.65:1812 to 10.100.2.39:45497 > length 20 > > Any Idea what I am doing wrong here? > > Regards > > > Henning > > ------------------------------ > > Subject: Digest Footer > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > > ------------------------------ > > End of Freeradius-Users Digest, Vol 213, Issue 21 > ************************************************* > -- Best regards, Ashraf Al-Basti

2 1

Testing FreeRADIUS Locally
by Raiya Al Rashdi 25 Jan '23

25 Jan '23

Dears, Good Day, I am trying to activate eduroam SP using FreeRADIUS by following these instructions https://wiki.geant.org/display/H2eduroam/eduroam+SP, in centos 7 OS, I am new in FreeRADIUS actually. I have finished the installation and eduroam configuration as mentioned above, I am trying to test the service locally, using “bob” user but I the test is fail, Could anybody assist me or guide me to discovered the issue . when I started the service by (systemctl restart radiusd)+ run radiusd -x I got Failed binding to auth address * port 1812 bound to server eduroam: Address already in use /etc/raddb/sites-enabled/eduroam[3]: Error binding to port for 0.0.0.0 port 1812 Then, when I test bob user I got as below [root@localhost ~]# radtest bob password 127.0.0.1 100 testing123 Sent Access-Request Id 73 from 0.0.0.0:54411 to 127.0.0.1:1812 length 73 User-Name = "bob" User-Password = "password" NAS-IP-Address = 127.0.0.1 NAS-Port = 100 Message-Authenticator = 0x00 Cleartext-Password = "password" Received Access-Reject Id 73 from 127.0.0.1:1812 to 0.0.0.0:0 length 20 1. -: Expected Access-Accept got Access-Reject When I stop the service and run radiusd -x I got ready to process request, then when I test bob user I got the below [root@localhost ~]# radtest bob password 127.0.0.1 100 testing123 Sent Access-Request Id 8 from 0.0.0.0:48138 to 127.0.0.1:1812 length 73 User-Name = "bob" User-Password = "password" NAS-IP-Address = 127.0.0.1 NAS-Port = 100 Message-Authenticator = 0x00 Cleartext-Password = "password" Sent Access-Request Id 8 from 0.0.0.0:48138 to 127.0.0.1:1812 length 73 User-Name = "bob" User-Password = "password" NAS-IP-Address = 127.0.0.1 NAS-Port = 100 Message-Authenticator = 0x00 Cleartext-Password = "password" Sent Access-Request Id 8 from 0.0.0.0:48138 to 127.0.0.1:1812 length 73 User-Name = "bob" User-Password = "password" NAS-IP-Address = 127.0.0.1 NAS-Port = 100 Message-Authenticator = 0x00 Cleartext-Password = "password" (0) No reply from server for ID 8 socket 3 radiusd -X output is as below FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/f_ticks including configuration file /etc/raddb/mods-enabled/eduroam_cui_log including configuration file /etc/raddb/mods-enabled/sql including configuration file /etc/raddb/mods-config/sql/main/sqlite/queries.conf including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/filter including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/eduroam main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 0.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server eduroam.om { ipaddr = 185.186.206.13 port = 1812 type = "auth+acct" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } realm LOCAL { } realm NULL { nostrip virtual_server = auth-reject } home_server_pool EDUROAM { type = fail-over home_server = eduroam.om } realm ~.+$ { pool = EDUROAM nostrip } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client OMREN-access-point-1 { ipaddr = 192.168.X.X netmask = 32 require_message_authenticator = yes secret = <<< secret >>> shortname = "AP1" virtual_server = "eduroam" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client OMREN-access-point-2 { ipaddr = 192.168.X.X netmask = 32 require_message_authenticator = yes secret = <<< secret >>> shortname = "AP2" virtual_server = "eduroam" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client eduroam.om { ipaddr = 185.186.206.13 require_message_authenticator = yes secret = <<< secret >>> shortname = "eduroam-main-server" virtual_server = "eduroam" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /Ã¤Ã©Ã¶Ã¼Ã Ã¢Ã¦Ã§Ã¨Ã©ÃªÃ«Ã®Ã¯Ã´Å“Ã¹Ã»Ã¼aÃ¿Ã„Ã‰Ã–ÃœÃŸÃ€Ã‚Ã†Ã‡ÃˆÃ‰ÃŠÃ‹ÃŽÃÃ”Å’Ã™Ã›ÃœÅ¸" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loading module "f_ticks" from file /etc/raddb/mods-enabled/f_ticks linelog f_ticks { filename = "syslog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "f_ticks.%{%{reply:Packet-Type}:-format}" } # Loading module "cui_log" from file /etc/raddb/mods-enabled/eduroam_cui_log linelog cui_log { filename = "/var/log/radius/radius.log" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "auth_log.%{%{reply:Packet-Type}:-format}" } # Loaded module rlm_sql # Loading module "sql" from file /etc/raddb/mods-enabled/sql sql { driver = "rlm_sql_null" server = "" port = 0 login = "" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "" default_user_profile = "" client_query = "SELECT id,nasname,shortname,type,secret FROM nas" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = ".query" type { accounting-on { } accounting-off { } start { } interim-update { } stop { } } } post-auth { reference = ".query" } } rlm_sql (sql): Driver rlm_sql_null (module rlm_sql_null) loaded and linked instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "f_ticks" from file /etc/raddb/mods-enabled/f_ticks # Instantiating module "cui_log" from file /etc/raddb/mods-enabled/eduroam_cui_log # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server eduroam { # from file /etc/raddb/sites-enabled/eduroam # Loading authorize {...} # Loading preacct {...} # Loading pre-proxy {...} # Loading post-proxy {...} # Loading post-auth {...} } # server eduroam radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 1812 Failed binding to auth address * port 1812 bound to server eduroam: Address already in use /etc/raddb/sites-enabled/eduroam[3]: Error binding to port for 0.0.0.0 port 1812 Regards, [cid:image001.png@01D924CC.ADF652B0] [cid:image003.png@01D924CC.ADF652B0][cid:image004.png@01D924CC.ADF652B0] [cid:image005.png@01D924CC.ADF652B0] Raiya Al Rashdi, Applications Developer Oman Research and Education Network - OMREN, Ministry of Higher Education, Research and Innovation P.O.Box 92, Innovation Park Muscat – Al Khoud 123, Sultanate of Oman T: +968 24442370 M: +968 98505517 E: raiya(a)omren.om <mailto:hilal.aljassasi@omren.om> OMREN is the official national research and education network of the Sultanate of Oman under the Ministry of Higher Education, Research, and novation to contribute to the rise of an effective national innovation ecosystem and provide the research and education community in the Sultanate of Oman with a common network and state of the art infrastructure dedicated and adapted to their needs.

3 5

Sequencing the users file with include
by Sébastien 65 24 Jan '23

24 Jan '23

Hello, I noticed a problem if I configure the file this way : root@radius:/etc/freeradius/3.0# cat users # user_zone1 $INCLUDE /etc/freeradius/3.0/users_1 # user_zone2 $INCLUDE /etc/freeradius/3.0/users_2 # Test test Cleartext-Password := "::123456789@" Reply-Message := "Hello, %{User-Name}" #DEFAULLT Section DEFAULT Alc-Primary-Dns = 8.8.8.8, Alc-Secondary-Dns = 192.168.100.100, Framed-IP-Netmask = 255.255.255.0, Alc-Default-Router = 192.168.100.1, Fall-Through = Yes DEFAULT Framed-Protocol == PPP Framed-Protocol = PPP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "CSLIP" Framed-Protocol = SLIP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "SLIP" Framed-Protocol = SLIP All the DNS and default-router part is not transmitted... I have to reorganize the file in this way for it to work : root@radius:/etc/freeradius/3.0# cat users #DEFAULLT Section DEFAULT Alc-Primary-Dns = 8.8.8.8, Alc-Secondary-Dns = 192.168.100.100, Framed-IP-Netmask = 255.255.255.0, Alc-Default-Router = 192.168.100.1, Fall-Through = Yes DEFAULT Framed-Protocol == PPP Framed-Protocol = PPP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "CSLIP" Framed-Protocol = SLIP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "SLIP" Framed-Protocol = SLIP # user_zone1 $INCLUDE /etc/freeradius/3.0/users_1 # user_zone2 $INCLUDE /etc/freeradius/3.0/users_2 # Test test Cleartext-Password := "::123456789@" Reply-Message := "Hello, %{User-Name}" Is this normal behavior (FreeRADIUS Version 3.0.21) ? Thanks for the explanation.

2 1

Freeradius-server-3.0.25 docking mariadb error
by 网络时代 23 Jan '23

23 Jan '23

Hello, ezhangiso@ezhangiso-virtual-machine:/$ docker exec -it radius-test /bin/bash root@4ff809b932fe:/# chgrp -h freerad /etc/freeradius/mods-available/sql root@4ff809b932fe:/# chown -R freerad:freerad /etc/freeradius/mods-enabled/sql root@4ff809b932fe:/# vi etc/freeradius/mods-available/sql root@4ff809b932fe:/# vi /etc/freeradius/sites-available/default root@4ff809b932fe:/# vi /etc/freeradius/sites-available/inner-tunnel root@4ff809b932fe:/# vi radiusd.conf root@4ff809b932fe:/# vi /etc/freeradius/radiusd.conf root@4ff809b932fe:/# cat etc/freeradius/mods-available/sql dialect = "mysql" driver = "rlm_sql_mysql" sqlite { filename = "/tmp/freeradius.db" busy_timeout = 200 bootstrap = "${modconfdir}/${..:name}/main/sqlite/schema.sql" } mysql { tls_required = no tls_check_cert = no tls_check_cert_cn = no } warnings = auto } postgresql { send_application_name = yes } # mongo { appname = "freeradius" tls { certificate_file = /path/to/file certificate_password = "password" ca_file = /path/to/file ca_dir = /path/to/directory crl_file = /path/to/file weak_cert_validation = false allow_invalid_hostname = false server = "10.0.8.31" port = 3306 login = "radius" password = "radius" radius_db = "radius" acct_table1 = "radacct" acct_table2 = "radacct" postauth_table = "radpostauth" authcheck_table = "radcheck" groupcheck_table = "radgroupcheck" authreply_table = "radreply" groupreply_table = "radgroupreply" usergroup_table = "radusergroup" delete_stale_sessions = yes pool { start = ${thread[pool].start_servers} min = ${thread[pool].min_spare_servers} max = ${thread[pool].max_servers} uses = 0 retry_delay = 30 lifetime = 0 idle_timeout = 60 client_table = "nas" group_attribute = "SQL-Group" $INCLUDE ${modconfdir}/${.:name}/main/${dialect}/queries.conf } root@4ff809b932fe:/# cat /etc/freeradius/radiusd.conf prefix = /usr exec_prefix = /usr sysconfdir = /etc localstatedir = /var sbindir = ${exec_prefix}/sbin logdir = /var/log/freeradius raddbdir = /etc/freeradius radacctdir = ${logdir}/radacct name = freeradius confdir = ${raddbdir} modconfdir = ${confdir}/mods-config certdir = ${confdir}/certs cadir   = ${confdir}/certs run_dir = ${localstatedir}/run/${name} db_dir = ${raddbdir} libdir = /usr/lib/freeradius pidfile = ${run_dir}/${name}.pid correct_escapes = true max_request_time = 30 cleanup_delay = 5 hostname_lookups = no log { destination = files colourise = yes file = ${logdir}/radius.log syslog_facility = daemon stripped_names = no auth = no auth_badpass = no auth_goodpass = no msg_denied = "You are already logged in - access denied" } checkrad = ${sbindir}/checkrad ENV { } security { user = freerad group = freerad allow_core_dumps = no max_attributes = 200 reject_delay = 1 status_server = yes } proxy_requests  = yes $INCLUDE proxy.conf $INCLUDE clients.conf thread pool { start_servers = 5 max_servers = 32 min_spare_servers = 3 max_spare_servers = 10 max_requests_per_server = 0 modules { $INCLUDE mods-enabled/sql $INCLUDE mods-enabled/ } policy { $INCLUDE policy.d/ } $INCLUDE sites-enabled/ root@4ff809b932fe:/# apt install mariadb-client root@4ff809b932fe:/# mysql -h 10.0.8.31 -uradius -p radius Enter password: Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Welcome to the MariaDB monitor.  Commands end with ; or \g. Your MariaDB connection id is 3 Server version: 10.6.5-MariaDB-1:10.6.5+maria~focal mariadb.org binary distribution Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. MariaDB [radius]> show tables; +------------------+ | Tables_in_radius | +------------------+ | nas              | | radacct          | | radcheck         | | radgroupcheck    | | radgroupreply    | | radpostauth      | | radreply         | | radusergroup     | +------------------+ 8 rows in set (0.00 sec) MariaDB [radius]> exit Bye root@4ff809b932fe:/# exit exit ezhangiso@ezhangiso-virtual-machine:/$ docker commit radius-test radius-mariadb sha256:1b5a68d2c3c3aaf70be72f8dcbfda27a7cf63e7ba448f412b73bd5f0d8aef63b ezhangiso@ezhangiso-virtual-machine:/$ docker stop radius-test radius-test ezhangiso@ezhangiso-virtual-machine:/$ docker run --rm --name myradius -t -p1812-1813:1812-1813/udp radius-mariadb -X FreeRADIUS Version 3.0.25 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including configuration file /etc/freeradius/mods-enabled/sql /etc/freeradius/mods-enabled/sql[365]: Reference "${dialect}" not found Errors reading or parsing /etc/freeradius/radiusd.conf ezhangiso@ezhangiso-virtual-machine:/$ Can anyone shed some light on this and point me in the right direction what else should I do?

2 1

Resuming a user cached session with EAP-TTLS
by florentvercourt＠gmail.com 23 Jan '23

23 Jan '23

>That doesn't make sense. The resumption tickets are sent via TLS to the client. >The client has chosen to not do session resumption. It probably needs to be configured to do that. Ok, I'll try to look my switch config to see if I found parameters to store sessions. Can you please indicate me the lines of logs in my previous message, in which resumption ticket is sent, thank very much. >Read the RFCs if you're wondering how TTLS works. I have already read it, but I just wanted to know what is the best practice. Florent VERCOURT

2 1

Resuming a user cached session with EAP-TTLS
by florentvercourt＠gmail.com 23 Jan '23

23 Jan '23

Hello everyone, I’m working to set up a FreeRADIUS server in version 3.2 that is able to perform fast-reauthentication of users by caching sessions. I‘m using EAP-TTLS/PAP as authentication protocol, and my users are stored in an LDAP. I would like to perform fast re-authentication of users once they have been authenticated and allowed on the network as it’s explained in this radius documentation article (link below). <https://networkradius.com/articles/2020/12/10/design-blueprint-for-universi ties.html> https://networkradius.com/articles/2020/12/10/design-blueprint-for-universit ies.html I configured the « eap » module by enabling the cache of session, but it seems sessions are only stored locally and, the ticket of the user sessions is not forward to the supplicant to perform the re-authentication later on, without having to go through all EAP-TTLS steps. When I try to regain access to the network after being authenticated once, all the EAP-TTLS steps are performed. So I would like to know if I misunderstood the cache section and the way it works in the « eap » module, or if there is a way to re-authenticate users in a defined period of time by using the cache after they disconnect. Also, Is it a good practice to send the total Length of the message in each packet, or is it not recommended? I configured « mods-enabled/eap » as follows : ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~ eap { default_eap_type = ttls timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = yes max_sessions = ${max_requests} tls-config tls-common { private_key_password = << secret >> private_key_file = ${certdir}/server.pem certificate_file = ${certdir}/server.pem ca_file = ${cadir}/ca.pem # auto_chain = yes # psk_identity = "test" # psk_hexphrase = "036363823" # psk_query = "%{sql:select hex(key) from psk_keys where keyid = '%{TLS-PSK-Identity}'}" # dh_file = ${certdir}/dh # random_file = /dev/urandom # fragment_size = 2048 include_length = yes # check_crl = yes # check_all_crl = yes # ca_path_reload_interval = 3600 allow_expired_crl = no reject_unknown_intermediate_ca = yes cipher_list = "DEFAULT" # sigalgs_list = "" cipher_server_preference = no tls_min_version = "1.2" tls_max_version = "1.3" ecdh_curve = "" cache { enable = yes lifetime = 18 # hours name = "EAP-test" persist_dir = "${logdir}/tlscache" store { Tunnel-type, Tunnel-medium-type, Tunnel-Private-Group-Id } } verify { # skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = " <http://127.0.0.1/ocsp/> http://127.0.0.1/ocsp/" # use_nonce = yes # timeout = 0 # softfail = no } # realm_dir = ${certdir}/realms/ } ttls { tls = tls-common default_eap_type = mschapv2 copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" # include_length = yes } } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~ My server is running correctly, here the debug output: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~ FreeRADIUS Version 3.2.1 Copyright (C) 1999-2022 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/ldap_dauphine including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/totp including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/digest including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/rfc7542 including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/moonshot-targeted-ids including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/abfab-tr including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dauphine including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/default main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 4 max_requests = 87040 postauth_client_lost = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 300 reject_delay = 1.200000 status_server = yes allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } recv_coa { } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client swi-d1-p173-002 { ipaddr = 10.100.0.50 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client edouard { ipaddr = 10.100.0.0/24 require_message_authenticator = no secret = <<< secret >>> proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client micro-switch { ipaddr = 10.100.12.139 require_message_authenticator = no secret = <<< secret >>> proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" usersfile = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addre ss}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addre ss}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addre ss}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addre ss}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_exec # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/raddb/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_ldap # Loading module "ldap_dauphine" from file /etc/raddb/mods-enabled/ldap_dauphine ldap ldap_dauphine { server = "ldap.dauphine.fr" port = 389 identity = "uid=radius,ou=bindusers,dc=dauphine,dc=fr" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=frClient)" scope = "sub" base_dn = "ou=people,dc=dauphine,dc=fr" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 20 srv_timelimit = 20 idle = 60 probes = 3 interval = 3 } tls { start_tls = no require_cert = "never" } } Creating attribute ldap_dauphine-LDAP-Group # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addre ss}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_totp # Loading module "totp" from file /etc/raddb/mods-enabled/totp # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = yes max_sessions = 87040 } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest instantiate { } # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/coa # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "ldap_dauphine" from file /etc/raddb/mods-enabled/ldap_dauphine rlm_ldap: libldap vendor: OpenLDAP, version: 20459 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap_dauphine): Initialising connection pool pool { start = 5 min = 4 max = 46 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 1 spread = no } rlm_ldap (ldap_dauphine): Opening additional connection (0), 1 of 46 pending slots used rlm_ldap (ldap_dauphine): Connecting to ldap://ldap.dauphine.fr:389 rlm_ldap (ldap_dauphine): Waiting for bind result... rlm_ldap (ldap_dauphine): Bind successful rlm_ldap (ldap_dauphine): Opening additional connection (1), 1 of 45 pending slots used rlm_ldap (ldap_dauphine): Connecting to ldap://ldap.dauphine.fr:389 rlm_ldap (ldap_dauphine): Waiting for bind result... rlm_ldap (ldap_dauphine): Bind successful rlm_ldap (ldap_dauphine): Opening additional connection (2), 1 of 44 pending slots used rlm_ldap (ldap_dauphine): Connecting to ldap://ldap.dauphine.fr:389 rlm_ldap (ldap_dauphine): Waiting for bind result... rlm_ldap (ldap_dauphine): Bind successful rlm_ldap (ldap_dauphine): Opening additional connection (3), 1 of 43 pending slots used rlm_ldap (ldap_dauphine): Connecting to ldap://ldap.dauphine.fr:389 rlm_ldap (ldap_dauphine): Waiting for bind result... rlm_ldap (ldap_dauphine): Bind successful rlm_ldap (ldap_dauphine): Opening additional connection (4), 1 of 42 pending slots used rlm_ldap (ldap_dauphine): Connecting to ldap://ldap.dauphine.fr:389 rlm_ldap (ldap_dauphine): Waiting for bind result... rlm_ldap (ldap_dauphine): Bind successful # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 allow_expired_crl = no cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = yes ecdh_curve = "" tls_max_version = "1.3" tls_min_version = "1.2" cache { enable = yes lifetime = 18 name = "EAP-test" max_entries = 255 persist_dir = "/var/log/radius/tlscache" } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = " <http://127.0.0.1/ocsp/> http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:336 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 53058 Listening on proxy address :: port 55734 Ready to process requests (0) Received Access-Request Id 116 from 10.100.0.16:1645 to 10.101.0.20:1812 length 257 (0) User-Name = "anonymous" (0) Service-Type = Framed-User (0) Cisco-AVPair = "service-type=Framed" (0) Framed-MTU = 1500 (0) Called-Station-Id = "1C-1D-86-68-F0-05" (0) Calling-Station-Id = "10-65-30-0F-CF-AD" (0) EAP-Message = 0x0201000e01616e6f6e796d6f7573 (0) Message-Authenticator = 0x27170bf1dd6f1899c3a48f0953367396 (0) Cisco-AVPair = "audit-session-id=0A64001000000150077A4C0A" (0) Cisco-AVPair = "method=dot1x" (0) Framed-IP-Address = 10.111.0.176 (0) NAS-IP-Address = 10.100.0.16 (0) NAS-Port-Id = "GigabitEthernet0/5" (0) NAS-Port-Type = Ethernet (0) NAS-Port = 50105 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ <mailto:/@\./> /(a)\./) { (0) if (&User-Name =~ <mailto:/@\./> /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 1 length 14 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: (TLS) Initiating new session (0) eap: Sending EAP Request (code 1) ID 2 length 6 (0) eap: EAP session adding &reply:State = 0xfe02921efe00877b (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) session-state: Saving cached attributes (0) Framed-MTU = 1014 (0) Sent Access-Challenge Id 116 from 10.101.0.20:1812 to 10.100.0.16:1645 length 64 (0) EAP-Message = 0x010200061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xfe02921efe00877b6bacf72413ed26ad (0) Finished request Waking up in 3.9 seconds. (1) Received Access-Request Id 117 from 10.100.0.16:1645 to 10.101.0.20:1812 length 524 (1) User-Name = "anonymous" (1) Service-Type = Framed-User (1) Cisco-AVPair = "service-type=Framed" (1) Framed-MTU = 1500 (1) Called-Station-Id = "1C-1D-86-68-F0-05" (1) Calling-Station-Id = "10-65-30-0F-CF-AD" (1) EAP-Message = 0x020201051580000000fb16030100f6010000f20303dc99e42d66e577ee8d0af140d8e46d9f bd48e63536874e0c314774ec014347f8200953178c2f5495c71a18fe2ad8eec676bf5e2d7044 5c63bd3d080835a5e946df002813021301c02cc02bc030c02fc024c023c028c027c00ac009c0 14c013009d009c003d003c0035002f01000081000500050100000000002b0009080304030303 020301000d001a00180804080508060401050102010403050302030202060106030023000000 0a00080006001d00170018003300260024001d00201bb4781d453e1b91b923da8a0c73f42f6c 6247d2477723266ac7c98181928a0c0031000000170000ff01000100002d00020101 (1) Message-Authenticator = 0x54b5e0c7cd28c4feae286e5b226d376c (1) Cisco-AVPair = "audit-session-id=0A64001000000150077A4C0A" (1) Cisco-AVPair = "method=dot1x" (1) Framed-IP-Address = 10.111.0.176 (1) NAS-IP-Address = 10.100.0.16 (1) NAS-Port-Id = "GigabitEthernet0/5" (1) NAS-Port-Type = Ethernet (1) NAS-Port = 50105 (1) State = 0xfe02921efe00877b6bacf72413ed26ad (1) Restoring &session-state (1) &session-state:Framed-MTU = 1014 (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ <mailto:/@\./> /(a)\./) { (1) if (&User-Name =~ <mailto:/@\./> /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 2 length 261 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xfe02921efe00877b (1) eap: Finished EAP session with state 0xfe02921efe00877b (1) eap: Previous EAP request found for state 0xfe02921efe00877b, released from the list (1) eap: Peer sent packet with method EAP TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Authenticate (1) eap_ttls: (TLS) EAP Peer says that the final record size will be 251 bytes (1) eap_ttls: (TLS) EAP Got all data (251 bytes) (1) eap_ttls: (TLS) Handshake state - before SSL initialization (1) eap_ttls: (TLS) Handshake state - Server before SSL initialization (1) eap_ttls: (TLS) Handshake state - Server before SSL initialization (1) eap_ttls: (TLS) recv TLS 1.3 Handshake, ClientHello (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client hello (1) eap_ttls: (TLS) send TLS 1.3 Handshake, ServerHello (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server hello (1) eap_ttls: (TLS) send TLS 1.3 ChangeCipherSpec (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec (1) eap_ttls: (TLS) send TLS 1.3 Handshake, EncryptedExtensions (1) eap_ttls: (TLS) Handshake state - Server TLSv1.3 write encrypted extensions (1) eap_ttls: (TLS) send TLS 1.3 Handshake, Certificate (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write certificate (1) eap_ttls: (TLS) send TLS 1.3 Handshake, CertificateVerify (1) eap_ttls: (TLS) Handshake state - Server TLSv1.3 write server certificate verify (1) eap_ttls: (TLS) send TLS 1.3 Handshake, Finished (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write finished (1) eap_ttls: (TLS) Handshake state - Server TLSv1.3 early data (1) eap_ttls: (TLS) Server : Need to read more data: TLSv1.3 early data (1) eap_ttls: (TLS) In Handshake Phase (1) eap: Sending EAP Request (code 1) ID 3 length 1024 (1) eap: EAP session adding &reply:State = 0xfe02921eff01877b (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) session-state: Saving cached attributes (1) Framed-MTU = 1014 (1) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (1) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, ServerHello" (1) TLS-Session-Information = "(TLS) send TLS 1.3 ChangeCipherSpec" (1) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, EncryptedExtensions" (1) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Certificate" (1) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, CertificateVerify" (1) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Finished" (1) Sent Access-Challenge Id 117 from 10.101.0.20:1812 to 10.100.0.16:1645 length 1090 (1) EAP-Message = 0x0103040015c000000bc9160303007a02000076030381b4a004b35335db2ff66ef5edd6ed4b 0688d9c0e4b6b25d1fa302772e2e70a7200953178c2f5495c71a18fe2ad8eec676bf5e2d7044 5c63bd3d080835a5e946df130200002e002b0002030400330024001d0020f318ac027b747f50 9768c85d7ebfbc626224cea3d101c5d59810fb7e8c7fa85f140303000101170303001785ca5e cb5f681c5af67a7fc28a2fe530799654b00fbad617030309bb26eb9d4a9031efc383c91f348e e4e7deccc759b1548cb9ecc402aa7cb28bf575845e8c778f9525b43b7cd39402e5dd4b927834 65dbbe6a004358cabbc564eb15bbfa5871bd052c486f5138a93aaf8e2e3e4a2c88ab777cd29c 5e15fa4a258b3f24acaba90931ab6fb035f9970bef74b4102569f5bfe7e2f458a6459abb5d35 a2251ba80f0d117c8f705b1ab369c351e7c0ee8342b9454f8f5d6dad9d2dad63734adf14c0d4 058d35368c6010c4cf9716fd1931c3ac6f3ece235eb1cd3d213ec253275e194b0d2f (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xfe02921eff01877b6bacf72413ed26ad (1) Finished request Waking up in 3.9 seconds. (2) Received Access-Request Id 118 from 10.100.0.16:1645 to 10.101.0.20:1812 length 267 (2) User-Name = "anonymous" (2) Service-Type = Framed-User (2) Cisco-AVPair = "service-type=Framed" (2) Framed-MTU = 1500 (2) Called-Station-Id = "1C-1D-86-68-F0-05" (2) Calling-Station-Id = "10-65-30-0F-CF-AD" (2) EAP-Message = 0x020300061500 (2) Message-Authenticator = 0x3f9ce0a2d3b32ad8e5a8134f48355378 (2) Cisco-AVPair = "audit-session-id=0A64001000000150077A4C0A" (2) Cisco-AVPair = "method=dot1x" (2) Framed-IP-Address = 10.111.0.176 (2) NAS-IP-Address = 10.100.0.16 (2) NAS-Port-Id = "GigabitEthernet0/5" (2) NAS-Port-Type = Ethernet (2) NAS-Port = 50105 (2) State = 0xfe02921eff01877b6bacf72413ed26ad (2) Restoring &session-state (2) &session-state:Framed-MTU = 1014 (2) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, ServerHello" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 ChangeCipherSpec" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, EncryptedExtensions" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Certificate" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, CertificateVerify" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Finished" (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ <mailto:/@\./> /(a)\./) { (2) if (&User-Name =~ <mailto:/@\./> /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 3 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xfe02921eff01877b (2) eap: Finished EAP session with state 0xfe02921eff01877b (2) eap: Previous EAP request found for state 0xfe02921eff01877b, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: (TLS) Peer ACKed our handshake fragment (2) eap: Sending EAP Request (code 1) ID 4 length 1024 (2) eap: EAP session adding &reply:State = 0xfe02921efc06877b (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) session-state: Saving cached attributes (2) Framed-MTU = 1014 (2) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (2) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, ServerHello" (2) TLS-Session-Information = "(TLS) send TLS 1.3 ChangeCipherSpec" (2) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, EncryptedExtensions" (2) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Certificate" (2) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, CertificateVerify" (2) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Finished" (2) Sent Access-Challenge Id 118 from 10.101.0.20:1812 to 10.100.0.16:1645 length 1090 (2) EAP-Message = 0x0104040015c000000bc9f1f4cf437af91b16d0f14a5c21719a9941f3395ad50388ec984a29 ce4e144f5a3dd4bc07b977eadc2f10a7b1cd069f9d114704a6f1e618c66300a6ea8b6f82b06c ac295225ddf9017c89f15555a5ec94e9299848d0194b29c5da68d837d7b216ba43eaa97be09c 774e2db93d5fe39afa11a3e0c131dc321ca3f802cf07085c067f5867ce2550d051171e4b8264 f9175382685ebe6f1d214b5772fe68eaf70a4a12f9f383afb826cfc71e3bbf79a7f9ce255bef 3c21983d5be1f1bc693c6848ef321c673d7343a1802ee3f83ae50da149d82e4ef7f575de1fe0 352dbae96a0051973f6a7a2a0a80c6bbab36bb123f4fcc5fea36f8bec44250a219f6c7dd0735 a29e011952a29d233ec78238801850eebab6662c239241c8908b0eff03836df40d9e2bad16be 5fe7d420490f2eb891dc413275ffa816aa7fe801f914463ae8000a38c5a7b42faa849ca6e8d9 71f715ee26f6193aa3ac30366599a17df457869a3a28df4d1eadea3c73a2fab17e2d (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xfe02921efc06877b6bacf72413ed26ad (2) Finished request Waking up in 3.9 seconds. (3) Received Access-Request Id 119 from 10.100.0.16:1645 to 10.101.0.20:1812 length 267 (3) User-Name = "anonymous" (3) Service-Type = Framed-User (3) Cisco-AVPair = "service-type=Framed" (3) Framed-MTU = 1500 (3) Called-Station-Id = "1C-1D-86-68-F0-05" (3) Calling-Station-Id = "10-65-30-0F-CF-AD" (3) EAP-Message = 0x020400061500 (3) Message-Authenticator = 0x69f837d9849e72401c77e51a5f9d3053 (3) Cisco-AVPair = "audit-session-id=0A64001000000150077A4C0A" (3) Cisco-AVPair = "method=dot1x" (3) Framed-IP-Address = 10.111.0.176 (3) NAS-IP-Address = 10.100.0.16 (3) NAS-Port-Id = "GigabitEthernet0/5" (3) NAS-Port-Type = Ethernet (3) NAS-Port = 50105 (3) State = 0xfe02921efc06877b6bacf72413ed26ad (3) Restoring &session-state (3) &session-state:Framed-MTU = 1014 (3) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, ServerHello" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 ChangeCipherSpec" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, EncryptedExtensions" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Certificate" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, CertificateVerify" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Finished" (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ <mailto:/@\./> /(a)\./) { (3) if (&User-Name =~ <mailto:/@\./> /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 4 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xfe02921efc06877b (3) eap: Finished EAP session with state 0xfe02921efc06877b (3) eap: Previous EAP request found for state 0xfe02921efc06877b, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: (TLS) Peer ACKed our handshake fragment (3) eap: Sending EAP Request (code 1) ID 5 length 999 (3) eap: EAP session adding &reply:State = 0xfe02921efd07877b (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) session-state: Saving cached attributes (3) Framed-MTU = 1014 (3) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (3) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, ServerHello" (3) TLS-Session-Information = "(TLS) send TLS 1.3 ChangeCipherSpec" (3) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, EncryptedExtensions" (3) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Certificate" (3) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, CertificateVerify" (3) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Finished" (3) Sent Access-Challenge Id 119 from 10.101.0.20:1812 to 10.100.0.16:1645 length 1063 (3) EAP-Message = 0x010503e7158000000bc9f5b05c15f0ae9d80fb7f6549d2607f8b5803a43a84d194ee02c4ff dc1e216fae66ecd0d89074b891785d67a9bae09ce967fecfc613537288353725672f2e209d69 42d313fc34155e5a1361cbb00085efe5b876c96ac364462384d580ebe80c95e147f3e77ba66a df5cfb428ce85b694743e7b2b22a99ab41751031bd9aa4f45d275ab0e4f375b15b8ad7f1209b f76ef703dbf6d78f04a56f4b2d34f6b61c8004e349338537f7c910178b25cb6addcb065b82d5 e0da810945b8605bc494ac81bb11e7f155156167dcf0d0246fbedb680253cd7e47fdf723b745 662ee142b8bf74c428944ca83349109da7b79e9bb74095ddceb897378009e96e6b591e378505 d39c60ef91f4679e04d5829aa6ea68b9fb9505703848b0c11485de27079f0a1aa72e9f7b6b94 4746d799c2415d39a4191d2e77a5b4ecab793498b835320b6b1bca58f379d94647489eb3d485 3c4eaae4be67b427adaa4b7237bf1c671e8e4159b93a049b92862af259194eba680b (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xfe02921efd07877b6bacf72413ed26ad (3) Finished request Waking up in 3.9 seconds. (4) Received Access-Request Id 120 from 10.100.0.16:1645 to 10.101.0.20:1812 length 421 (4) User-Name = "anonymous" (4) Service-Type = Framed-User (4) Cisco-AVPair = "service-type=Framed" (4) Framed-MTU = 1500 (4) Called-Station-Id = "1C-1D-86-68-F0-05" (4) Calling-Station-Id = "10-65-30-0F-CF-AD" (4) EAP-Message = 0x020500a01580000000961403030001011703030045727b7c7d139d0382232c4013124229c0 8693d0974531dbcdd3d59d210afebe1097bfc7468da2024832126365069720b2095b8049e735 9005ed64d22f9734a04ad09224a78017030300416625c5d7d0c92d892ae205010a224bd2a610 1de65acd878a2736a836174366497e0d2acbfd4a28dfd93984adcd98dc20e1b02a7f88255e01 d3b6fa21ee31b5b70e (4) Message-Authenticator = 0x068f3eb81cbe86211779105adf4e14fe (4) Cisco-AVPair = "audit-session-id=0A64001000000150077A4C0A" (4) Cisco-AVPair = "method=dot1x" (4) Framed-IP-Address = 10.111.0.176 (4) NAS-IP-Address = 10.100.0.16 (4) NAS-Port-Id = "GigabitEthernet0/5" (4) NAS-Port-Type = Ethernet (4) NAS-Port = 50105 (4) State = 0xfe02921efd07877b6bacf72413ed26ad (4) Restoring &session-state (4) &session-state:Framed-MTU = 1014 (4) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, ServerHello" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 ChangeCipherSpec" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, EncryptedExtensions" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Certificate" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, CertificateVerify" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Finished" (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ <mailto:/@\./> /(a)\./) { (4) if (&User-Name =~ <mailto:/@\./> /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 5 length 160 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xfe02921efd07877b (4) eap: Finished EAP session with state 0xfe02921efd07877b (4) eap: Previous EAP request found for state 0xfe02921efd07877b, released from the list (4) eap: Peer sent packet with method EAP TTLS (21) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: Authenticate (4) eap_ttls: (TLS) EAP Peer says that the final record size will be 150 bytes (4) eap_ttls: (TLS) EAP Got all data (150 bytes) (4) eap_ttls: (TLS) Handshake state - Server TLSv1.3 early data (4) eap_ttls: (TLS) recv TLS 1.3 Handshake, Finished (4) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read finished (4) eap_ttls: (TLS) Handshake state - SSLv3/TLS write session ticket (4) eap_ttls: Serialising session 8faab009e995e9bb9401cf4dcda4009e1a4574e7652198df76d40a3f89ecafb2, and storing in cache (4) eap_ttls: WARNING: (TLS) Wrote session 8faab009e995e9bb9401cf4dcda4009e1a4574e7652198df76d40a3f89ecafb2 to /var/log/radius/tlscache/8faab009e995e9bb9401cf4dcda4009e1a4574e7652198df76d 40a3f89ecafb2.asn1 (141 bytes) (4) eap_ttls: (TLS) send TLS 1.3 Handshake, NewSessionTicket (4) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write session ticket (4) eap_ttls: (TLS) recv TLS 1.3 Handshake, NewSessionTicket (4) eap_ttls: Session established. Proceeding to decode tunneled attributes (4) eap_ttls: Got tunneled request (4) eap_ttls: User-Name = "fvercourt" (4) eap_ttls: User-Password = "xC#8z7p6DDB8?a67ctQ7" (4) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (4) eap_ttls: Sending tunneled request (4) Virtual server inner-tunnel received request (4) User-Name = "<< user_name >>" (4) User-Password = "<< secret >>" (4) FreeRADIUS-Proxied-To = 127.0.0.1 (4) Service-Type = Framed-User (4) Cisco-AVPair = "service-type=Framed" (4) Cisco-AVPair = "audit-session-id=0A64001000000150077A4C0A" (4) Cisco-AVPair = "method=dot1x" (4) Framed-MTU = 1500 (4) Called-Station-Id = "1C-1D-86-68-F0-05" (4) Calling-Station-Id = "10-65-30-0F-CF-AD" (4) Framed-IP-Address = 10.111.0.176 (4) NAS-IP-Address = 10.100.0.16 (4) NAS-Port-Id = "GigabitEthernet0/5" (4) NAS-Port-Type = Ethernet (4) NAS-Port = 50105 (4) Event-Timestamp = "Jan 23 2023 15:48:30 CET" (4) server inner-tunnel { (4) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ <mailto:/@\./> /(a)\./) { (4) if (&User-Name =~ <mailto:/@\./> /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [chap] = noop (4) [mschap] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "<< user_name >>", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) update control { (4) &Proxy-To-Realm := LOCAL (4) } # update control = noop (4) eap: No EAP-Message, not doing EAP (4) [eap] = noop (4) [files] = noop rlm_ldap (ldap_dauphine): Reserved connection (0) (4) ldap_dauphine: EXPAND (|(supannAliasLogin=%{%{Stripped-User-Name}:-%{User-Name}}) (mail=%{%{Stripped-User-Name}:-%{User-Name}}) (mail=%{%{Stripped-User-Name}:-%{User-Name}}@dauphine.fr)) (4) ldap_dauphine: --> (|(supannAliasLogin="<< user_name >>") (mail="<< user_name >>") (mail=<<@dauphine.fr)) (4) ldap_dauphine: Performing search in "ou=people,dc=dauphine,dc=fr" with filter "(|(supannAliasLogin="<< user_name >>") (mail="<< user_name >>") (mail="<< user_name >>"@dauphine.fr))", scope "sub" (4) ldap_dauphine: Waiting for search result... ber_get_next failed, errno=0. rlm_ldap (ldap_dauphine): Reconnecting (0) rlm_ldap (ldap_dauphine): Connecting to ldap://ldap.dauphine.fr:389 rlm_ldap (ldap_dauphine): Waiting for bind result... rlm_ldap (ldap_dauphine): Bind successful (4) ldap_dauphine: WARNING: Search failed: Can't contact LDAP server. Got new socket, retrying... (4) ldap_dauphine: Waiting for search result... (4) ldap_dauphine: User object found at DN "uid=00061572,ou=people,dc=dauphine,dc=fr" (4) ldap_dauphine: Processing user attributes (4) ldap_dauphine: control:Password-With-Header += '<< Password_HASH >>’ rlm_ldap (ldap_dauphine): Released connection (0) rlm_ldap (ldap_dauphine): Closing connection (1) - Too many unused connections. (4) [ldap_dauphine] = updated (4) [expiration] = noop (4) [logintime] = noop (4) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password (4) pap: Removing &control:Password-With-Header (4) pap: Normalizing SSHA1-Password from base64 encoding, 32 bytes -> 24 bytes (4) [pap] = updated (4) } # authorize = updated (4) Found Auth-Type = PAP (4) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (4) Auth-Type PAP { (4) pap: Login attempt with password (4) pap: Comparing with "known-good" SSHA-Password (4) pap: User authenticated successfully (4) [pap] = ok (4) } # Auth-Type PAP = ok (4) # Executing section post-auth from file /etc/raddb/sites-enabled/inner-tunnel (4) post-auth { (4) if (0) { (4) if (0) -> FALSE (4) } # post-auth = noop (4) Login OK: [<< user_name >>] (from client edouard port 50105 cli 10-65-30-0F-CF-AD via TLS tunnel) (4) } # server inner-tunnel (4) Virtual server sending reply (4) eap_ttls: Got tunneled Access-Accept (4) eap_ttls: (TLS) cache - Setting up attributes for session resumption (4) eap_ttls: caching EAP-Type = TTLS (4) eap_ttls: Saving session 8faab009e995e9bb9401cf4dcda4009e1a4574e7652198df76d40a3f89ecafb2 in the disk cache (4) eap: Sending EAP Success (code 3) ID 5 length 4 (4) eap: Freeing handler (4) [eap] = ok (4) } # authenticate = ok (4) # Executing section post-auth from file /etc/raddb/sites-enabled/default (4) post-auth { (4) update reply { (4) Tunnel-type = VLAN (4) Tunnel-medium-type = IEEE-802 (4) Tunnel-Private-Group-Id = 333 (4) } # update reply = noop (4) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (4) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (4) update { (4) &reply::Framed-MTU += &session-state:Framed-MTU[*] -> 1014 (4) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) recv TLS 1.3 Handshake, ClientHello' (4) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.3 Handshake, ServerHello' (4) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.3 ChangeCipherSpec' (4) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.3 Handshake, EncryptedExtensions' (4) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.3 Handshake, Certificate' (4) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.3 Handshake, CertificateVerify' (4) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.3 Handshake, Finished' (4) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) recv TLS 1.3 Handshake, Finished' (4) &reply::TLS-Cache-Filename += &session-state:TLS-Cache-Filename[*] -> '/var/log/radius/tlscache/8faab009e995e9bb9401cf4dcda4009e1a4574e7652198df76 d40a3f89ecafb2.asn1' (4) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.3 Handshake, NewSessionTicket' (4) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) recv TLS 1.3 Handshake, NewSessionTicket' (4) } # update = noop (4) [exec] = noop (4) policy remove_reply_message_if_eap { (4) if (&reply:EAP-Message && &reply:Reply-Message) { (4) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (4) else { (4) [noop] = noop (4) } # else = noop (4) } # policy remove_reply_message_if_eap = noop (4) if (EAP-Key-Name && &reply:EAP-Session-Id) { (4) if (EAP-Key-Name && &reply:EAP-Session-Id) -> FALSE (4) } # post-auth = noop (4) Login OK: [anonymous] (from client edouard port 50105 cli 10-65-30-0F-CF-AD) (4) Sent Access-Accept Id 120 from 10.101.0.20:1812 to 10.100.0.16:1645 length 195 (4) MS-MPPE-Recv-Key = 0xe8f069d02ca53749e572b46431b26292c44bba7742a8dc2ee298bf2d0204bab3 (4) MS-MPPE-Send-Key = 0x3b4174e10b09e1b4bb95d18de1176dcec746aa5097fe8932cbfa6ea96149f368 (4) EAP-Message = 0x03050004 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) User-Name = "anonymous" (4) Tunnel-Type = VLAN (4) Tunnel-Medium-Type = IEEE-802 (4) Tunnel-Private-Group-Id = "333" (4) Framed-MTU += 1014 (4) Finished request Waking up in 2.0 seconds. (5) Received Accounting-Request Id 77 from 10.100.0.16:1646 to 10.101.0.20:1813 length 229 (5) Framed-IP-Address = 10.111.0.176 (5) User-Name = "anonymous" (5) Cisco-AVPair = "audit-session-id=0A64001000000150077A4C0A" (5) Cisco-AVPair = "vlan-id=333" (5) Cisco-AVPair = "method=dot1x" (5) Called-Station-Id = "1C-1D-86-68-F0-05" (5) Calling-Station-Id = "10-65-30-0F-CF-AD" (5) NAS-IP-Address = 10.100.0.16 (5) NAS-Port-Id = "GigabitEthernet0/5" (5) NAS-Port-Type = Ethernet (5) NAS-Port = 50105 (5) Acct-Session-Id = "0000007E" (5) Acct-Status-Type = Start (5) Event-Timestamp = "Jan 23 2023 15:48:31 CET" (5) Acct-Delay-Time = 0 (5) # Executing section preacct from file /etc/raddb/sites-enabled/default (5) preacct { (5) [preprocess] = ok (5) policy acct_unique { (5) update request { (5) &Tmp-String-9 := "ai:" (5) } # update request = noop (5) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (5) EXPAND %{hex:&Class} (5) --> (5) EXPAND ^%{hex:&Tmp-String-9} (5) --> ^61693a (5) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (5) else { (5) update request { (5) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Addres s}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (5) --> 26336d4848cc85848291b9aff73b07c4 (5) &Acct-Unique-Session-Id := 26336d4848cc85848291b9aff73b07c4 (5) } # update request = noop (5) } # else = noop (5) update request { (5) &Tmp-String-9 !* ANY (5) } # update request = noop (5) } # policy acct_unique = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) [files] = noop (5) } # preacct = ok (5) # Executing section accounting from file /etc/raddb/sites-enabled/default (5) accounting { (5) detail: EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addres s}}/detail-%Y%m%d (5) detail: --> /var/log/radius/radacct/10.100.0.16/detail-20230123 (5) detail: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addres s}}/detail-%Y%m%d expands to /var/log/radius/radacct/10.100.0.16/detail-20230123 (5) detail: EXPAND %t (5) detail: --> Mon Jan 23 15:48:31 2023 (5) [detail] = ok (5) [unix] = ok (5) [exec] = noop (5) attr_filter.accounting_response: EXPAND %{User-Name} (5) attr_filter.accounting_response: --> anonymous (5) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (5) [attr_filter.accounting_response] = updated (5) } # accounting = updated (5) Sent Accounting-Response Id 77 from 10.101.0.20:1813 to 10.100.0.16:1646 length 20 (5) Finished request (5) Cleaning up request packet ID 77 with timestamp +46 due to done Waking up in 1.0 seconds. (0) Cleaning up request packet ID 116 with timestamp +43 due to cleanup_delay was reached (1) Cleaning up request packet ID 117 with timestamp +43 due to cleanup_delay was reached (2) Cleaning up request packet ID 118 with timestamp +43 due to cleanup_delay was reached (3) Cleaning up request packet ID 119 with timestamp +43 due to cleanup_delay was reached Waking up in 1.8 seconds. (4) Cleaning up request packet ID 120 with timestamp +45 due to cleanup_delay was reached Ready to process requests (6) Received Accounting-Request Id 78 from 10.100.0.16:1646 to 10.101.0.20:1813 length 265 (6) Framed-IP-Address = 10.111.0.176 (6) User-Name = "anonymous" (6) Cisco-AVPair = "audit-session-id=0A64001000000150077A4C0A" (6) Cisco-AVPair = "vlan-id=333" (6) Cisco-AVPair = "method=dot1x" (6) Called-Station-Id = "1C-1D-86-68-F0-05" (6) Calling-Station-Id = "10-65-30-0F-CF-AD" (6) NAS-IP-Address = 10.100.0.16 (6) NAS-Port-Id = "GigabitEthernet0/5" (6) NAS-Port-Type = Ethernet (6) NAS-Port = 50105 (6) Acct-Session-Id = "0000007E" (6) Acct-Terminate-Cause = Lost-Carrier (6) Acct-Status-Type = Stop (6) Event-Timestamp = "Jan 23 2023 15:51:31 CET" (6) Acct-Session-Time = 180 (6) Acct-Input-Octets = 20194364 (6) Acct-Output-Octets = 1261011568 (6) Acct-Input-Packets = 184950 (6) Acct-Output-Packets = 899478 (6) Acct-Delay-Time = 0 (6) # Executing section preacct from file /etc/raddb/sites-enabled/default (6) preacct { (6) [preprocess] = ok (6) policy acct_unique { (6) update request { (6) &Tmp-String-9 := "ai:" (6) } # update request = noop (6) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (6) EXPAND %{hex:&Class} (6) --> (6) EXPAND ^%{hex:&Tmp-String-9} (6) --> ^61693a (6) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (6) else { (6) update request { (6) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Addres s}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (6) --> 26336d4848cc85848291b9aff73b07c4 (6) &Acct-Unique-Session-Id := 26336d4848cc85848291b9aff73b07c4 (6) } # update request = noop (6) } # else = noop (6) update request { (6) &Tmp-String-9 !* ANY (6) } # update request = noop (6) } # policy acct_unique = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) [files] = noop (6) } # preacct = ok (6) # Executing section accounting from file /etc/raddb/sites-enabled/default (6) accounting { (6) detail: EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addres s}}/detail-%Y%m%d (6) detail: --> /var/log/radius/radacct/10.100.0.16/detail-20230123 (6) detail: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addres s}}/detail-%Y%m%d expands to /var/log/radius/radacct/10.100.0.16/detail-20230123 (6) detail: EXPAND %t (6) detail: --> Mon Jan 23 15:51:31 2023 (6) [detail] = ok (6) [unix] = ok (6) [exec] = noop (6) attr_filter.accounting_response: EXPAND %{User-Name} (6) attr_filter.accounting_response: --> anonymous (6) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (6) [attr_filter.accounting_response] = updated (6) } # accounting = updated (6) Sent Accounting-Response Id 78 from 10.101.0.20:1813 to 10.100.0.16:1646 length 20 (6) Finished request (6) Cleaning up request packet ID 78 with timestamp +226 due to done Ready to process requests (7) Received Access-Request Id 121 from 10.100.0.16:1645 to 10.101.0.20:1812 length 257 (7) User-Name = "anonymous" (7) Service-Type = Framed-User (7) Cisco-AVPair = "service-type=Framed" (7) Framed-MTU = 1500 (7) Called-Station-Id = "1C-1D-86-68-F0-05" (7) Calling-Station-Id = "10-65-30-0F-CF-AD" (7) EAP-Message = 0x0201000e01616e6f6e796d6f7573 (7) Message-Authenticator = 0x95fbe1a2b99598e655d08d4d335dc5bd (7) Cisco-AVPair = "audit-session-id=0A64001000000151077D98D2" (7) Cisco-AVPair = "method=dot1x" (7) Framed-IP-Address = 10.111.0.176 (7) NAS-IP-Address = 10.100.0.16 (7) NAS-Port-Id = "GigabitEthernet0/5" (7) NAS-Port-Type = Ethernet (7) NAS-Port = 50105 (7) # Executing section authorize from file /etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ <mailto:/@\./> /(a)\./) { (7) if (&User-Name =~ <mailto:/@\./> /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 1 length 14 (7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Peer sent packet with method EAP Identity (1) (7) eap: Calling submodule eap_ttls to process data (7) eap_ttls: (TLS) Initiating new session (7) eap: Sending EAP Request (code 1) ID 2 length 6 (7) eap: EAP session adding &reply:State = 0xbb455463bb474125 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/raddb/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) session-state: Saving cached attributes (7) Framed-MTU = 1014 (7) Sent Access-Challenge Id 121 from 10.101.0.20:1812 to 10.100.0.16:1645 length 64 (7) EAP-Message = 0x010200061520 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xbb455463bb4741259c77a610d5caea1f (7) Finished request Waking up in 3.9 seconds. (8) Received Access-Request Id 122 from 10.100.0.16:1645 to 10.101.0.20:1812 length 524 (8) User-Name = "anonymous" (8) Service-Type = Framed-User (8) Cisco-AVPair = "service-type=Framed" (8) Framed-MTU = 1500 (8) Called-Station-Id = "1C-1D-86-68-F0-05" (8) Calling-Station-Id = "10-65-30-0F-CF-AD" (8) EAP-Message = 0x020201051580000000fb16030100f6010000f20303bc7cb74fc4e656b719b2b4aea42da3dc ab905197e53228b91170245440171b25202eca8734fde773de82eb9ce9b5a54084c899da401f baecdf67e065ff118c5026002813021301c02cc02bc030c02fc024c023c028c027c00ac009c0 14c013009d009c003d003c0035002f01000081000500050100000000002b0009080304030303 020301000d001a00180804080508060401050102010403050302030202060106030023000000 0a00080006001d00170018003300260024001d002045478a7ec1699508b4546bde4c1692e625 2630658b936ae3289d11ba3ce90d380031000000170000ff01000100002d00020101 (8) Message-Authenticator = 0xe1a588f3c4720ed8de29e1e948d11116 (8) Cisco-AVPair = "audit-session-id=0A64001000000151077D98D2" (8) Cisco-AVPair = "method=dot1x" (8) Framed-IP-Address = 10.111.0.176 (8) NAS-IP-Address = 10.100.0.16 (8) NAS-Port-Id = "GigabitEthernet0/5" (8) NAS-Port-Type = Ethernet (8) NAS-Port = 50105 (8) State = 0xbb455463bb4741259c77a610d5caea1f (8) Restoring &session-state (8) &session-state:Framed-MTU = 1014 (8) # Executing section authorize from file /etc/raddb/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ <mailto:/@\./> /(a)\./) { (8) if (&User-Name =~ <mailto:/@\./> /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 2 length 261 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/raddb/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0xbb455463bb474125 (8) eap: Finished EAP session with state 0xbb455463bb474125 (8) eap: Previous EAP request found for state 0xbb455463bb474125, released from the list (8) eap: Peer sent packet with method EAP TTLS (21) (8) eap: Calling submodule eap_ttls to process data (8) eap_ttls: Authenticate (8) eap_ttls: (TLS) EAP Peer says that the final record size will be 251 bytes (8) eap_ttls: (TLS) EAP Got all data (251 bytes) (8) eap_ttls: (TLS) Handshake state - before SSL initialization (8) eap_ttls: (TLS) Handshake state - Server before SSL initialization (8) eap_ttls: (TLS) Handshake state - Server before SSL initialization (8) eap_ttls: (TLS) recv TLS 1.3 Handshake, ClientHello (8) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client hello (8) eap_ttls: (TLS) send TLS 1.3 Handshake, ServerHello (8) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server hello (8) eap_ttls: (TLS) send TLS 1.3 ChangeCipherSpec (8) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec (8) eap_ttls: (TLS) send TLS 1.3 Handshake, EncryptedExtensions (8) eap_ttls: (TLS) Handshake state - Server TLSv1.3 write encrypted extensions (8) eap_ttls: (TLS) send TLS 1.3 Handshake, Certificate (8) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write certificate (8) eap_ttls: (TLS) send TLS 1.3 Handshake, CertificateVerify (8) eap_ttls: (TLS) Handshake state - Server TLSv1.3 write server certificate verify (8) eap_ttls: (TLS) send TLS 1.3 Handshake, Finished (8) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write finished (8) eap_ttls: (TLS) Handshake state - Server TLSv1.3 early data (8) eap_ttls: (TLS) Server : Need to read more data: TLSv1.3 early data (8) eap_ttls: (TLS) In Handshake Phase (8) eap: Sending EAP Request (code 1) ID 3 length 1024 (8) eap: EAP session adding &reply:State = 0xbb455463ba464125 (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /etc/raddb/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) session-state: Saving cached attributes (8) Framed-MTU = 1014 (8) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (8) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, ServerHello" (8) TLS-Session-Information = "(TLS) send TLS 1.3 ChangeCipherSpec" (8) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, EncryptedExtensions" (8) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Certificate" (8) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, CertificateVerify" (8) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Finished" (8) Sent Access-Challenge Id 122 from 10.101.0.20:1812 to 10.100.0.16:1645 length 1090 (8) EAP-Message = 0x0103040015c000000bc9160303007a020000760303770024854f0856f5a9aa4433bd168a8c 1663b8864fab363383e1f0c48b01e4c5202eca8734fde773de82eb9ce9b5a54084c899da401f baecdf67e065ff118c5026130200002e002b0002030400330024001d0020eb1d7c9a661dbb80 87e6e503dfec301a45369a25fa9e9629450e499e45c4c83714030300010117030300175e2aa3 5daab2e2c1e777265f7c05aaf59a9952866a99f317030309bbfd1f007754fa0dd33e6f75f2a6 5b42c25bec9b25dd1385f3a3751f06bac475df736093e7dbd5e54646bc9172c7a865d05a646b 6a0d973b82988ad50faf2223fdb02451847eef9ac19930e0928e8d3dd7573d7d7396f914d0f6 df7253e91a634fd678e75694d26b0322e162d7c496eae3cb1cee84e9af371b2b682666ef8f46 f3667c806a8b470d8e6988a41f9df82a3740a325d9d7f7c7d49a8d4eeb15c3dbe8d799dfc39f 588fdc75380c1bd5657c77c0610440293c69e81f37a27ca086579651f458ab6eb3de (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0xbb455463ba4641259c77a610d5caea1f (8) Finished request Waking up in 3.9 seconds. (9) Received Access-Request Id 123 from 10.100.0.16:1645 to 10.101.0.20:1812 length 267 (9) User-Name = "anonymous" (9) Service-Type = Framed-User (9) Cisco-AVPair = "service-type=Framed" (9) Framed-MTU = 1500 (9) Called-Station-Id = "1C-1D-86-68-F0-05" (9) Calling-Station-Id = "10-65-30-0F-CF-AD" (9) EAP-Message = 0x020300061500 (9) Message-Authenticator = 0x2230b850fae1f735dff59252f552a475 (9) Cisco-AVPair = "audit-session-id=0A64001000000151077D98D2" (9) Cisco-AVPair = "method=dot1x" (9) Framed-IP-Address = 10.111.0.176 (9) NAS-IP-Address = 10.100.0.16 (9) NAS-Port-Id = "GigabitEthernet0/5" (9) NAS-Port-Type = Ethernet (9) NAS-Port = 50105 (9) State = 0xbb455463ba4641259c77a610d5caea1f (9) Restoring &session-state (9) &session-state:Framed-MTU = 1014 (9) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, ServerHello" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 ChangeCipherSpec" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, EncryptedExtensions" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Certificate" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, CertificateVerify" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Finished" (9) # Executing section authorize from file /etc/raddb/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ <mailto:/@\./> /(a)\./) { (9) if (&User-Name =~ <mailto:/@\./> /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 3 length 6 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/raddb/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0xbb455463ba464125 (9) eap: Finished EAP session with state 0xbb455463ba464125 (9) eap: Previous EAP request found for state 0xbb455463ba464125, released from the list (9) eap: Peer sent packet with method EAP TTLS (21) (9) eap: Calling submodule eap_ttls to process data (9) eap_ttls: Authenticate (9) eap_ttls: (TLS) Peer ACKed our handshake fragment (9) eap: Sending EAP Request (code 1) ID 4 length 1024 (9) eap: EAP session adding &reply:State = 0xbb455463b9414125 (9) [eap] = handled (9) } # authenticate = handled (9) Using Post-Auth-Type Challenge (9) # Executing group from file /etc/raddb/sites-enabled/default (9) Challenge { ... } # empty sub-section is ignored (9) session-state: Saving cached attributes (9) Framed-MTU = 1014 (9) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (9) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, ServerHello" (9) TLS-Session-Information = "(TLS) send TLS 1.3 ChangeCipherSpec" (9) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, EncryptedExtensions" (9) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Certificate" (9) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, CertificateVerify" (9) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Finished" (9) Sent Access-Challenge Id 123 from 10.101.0.20:1812 to 10.100.0.16:1645 length 1090 (9) EAP-Message = 0x0104040015c000000bc95c6adce2df0918de28872f44b0532fc184381223951f6a6203a1f9 1e2282872f2ca960a9866f1e84e8a30448781f7ce81fc0a4f3786e6e58161ad9b35f33bd2cef 6cf972c7458b0dae8ef799b2596063c40f67d54a62f8dc0ca06649343a758b17e9e77044f57f fd239786df3da73c6cab18965541976d7fa1653efeb62c5048bcc0de713371ed2528ebb50726 f0ed6dfb32c53a898d2f2d0d315210e4ed8dd33d3d69cbd223d95cbc5f86dddf78f1ac963f50 2f2a910e7922a444c8a58e125b4eaf95e9b3075122cfe83a0e088176d072dd9fbaec52ad93da 3e90725c2835a74c4dd5a649f180526e16c22b7890f498b7112439af08e3e0e36c1d431ff635 5c12d6426de65021aca7dffe91316af2e526b6e2da8b881f9daf49f2bc66d370d9a909b36a0c 610f8ea9a995e0380ef9fc5c2f208ea20079e2c5ef1adef8b7fc55e68ff6296572a736248a2f ddb9c4bc3cc343f6bfb33321cae0b2fcd0c4dfdba8392eefd789782343155bb333c9 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0xbb455463b94141259c77a610d5caea1f (9) Finished request Waking up in 3.9 seconds. (10) Received Access-Request Id 124 from 10.100.0.16:1645 to 10.101.0.20:1812 length 267 (10) User-Name = "anonymous" (10) Service-Type = Framed-User (10) Cisco-AVPair = "service-type=Framed" (10) Framed-MTU = 1500 (10) Called-Station-Id = "1C-1D-86-68-F0-05" (10) Calling-Station-Id = "10-65-30-0F-CF-AD" (10) EAP-Message = 0x020400061500 (10) Message-Authenticator = 0xcf01c3ce8e8c77c72ffbd3cb7f4df406 (10) Cisco-AVPair = "audit-session-id=0A64001000000151077D98D2" (10) Cisco-AVPair = "method=dot1x" (10) Framed-IP-Address = 10.111.0.176 (10) NAS-IP-Address = 10.100.0.16 (10) NAS-Port-Id = "GigabitEthernet0/5" (10) NAS-Port-Type = Ethernet (10) NAS-Port = 50105 (10) State = 0xbb455463b94141259c77a610d5caea1f (10) Restoring &session-state (10) &session-state:Framed-MTU = 1014 (10) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (10) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, ServerHello" (10) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 ChangeCipherSpec" (10) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, EncryptedExtensions" (10) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Certificate" (10) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, CertificateVerify" (10) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Finished" (10) # Executing section authorize from file /etc/raddb/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ <mailto:/@\./> /(a)\./) { (10) if (&User-Name =~ <mailto:/@\./> /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) eap: Peer sent EAP Response (code 2) ID 4 length 6 (10) eap: Continuing tunnel setup (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = eap (10) # Executing group from file /etc/raddb/sites-enabled/default (10) authenticate { (10) eap: Expiring EAP session with state 0xbb455463b9414125 (10) eap: Finished EAP session with state 0xbb455463b9414125 (10) eap: Previous EAP request found for state 0xbb455463b9414125, released from the list (10) eap: Peer sent packet with method EAP TTLS (21) (10) eap: Calling submodule eap_ttls to process data (10) eap_ttls: Authenticate (10) eap_ttls: (TLS) Peer ACKed our handshake fragment (10) eap: Sending EAP Request (code 1) ID 5 length 999 (10) eap: EAP session adding &reply:State = 0xbb455463b8404125 (10) [eap] = handled (10) } # authenticate = handled (10) Using Post-Auth-Type Challenge (10) # Executing group from file /etc/raddb/sites-enabled/default (10) Challenge { ... } # empty sub-section is ignored (10) session-state: Saving cached attributes (10) Framed-MTU = 1014 (10) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (10) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, ServerHello" (10) TLS-Session-Information = "(TLS) send TLS 1.3 ChangeCipherSpec" (10) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, EncryptedExtensions" (10) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Certificate" (10) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, CertificateVerify" (10) TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Finished" (10) Sent Access-Challenge Id 124 from 10.101.0.20:1812 to 10.100.0.16:1645 length 1063 (10) EAP-Message = 0x010503e7158000000bc9d9ab09bcb961adae0a3f7517ba8cf219156a8645871001f01b9a48 1a98d7386ebede08d1235a47d1c068dee101bd2c8e568fb55e4f110b1ce27fd37b16cecc3944 274430f835717ae26145c0f6d748240d91650e9fac6ecd002cc723efda237b47b0ee041ec63a 686b92e664de819d2b9e5439f4f9de7a2cc4eda2057c7447dad43fc1aaad003b665e9a463bdd 07ca61b3edae4139d7f80977c247a45697ca33aae4c8ea6d03e021804be9eeed4cc433334fd6 25c62a5e7859f52fecc302ac83a6058bac46d982e98f1d0773a26be0cbe62271b45f50c9353d a5d6c1fb28ee5aa127845a83030875fd6028e63194c03640150d5388df8887ca0f87b1311b02 243a67abc28794570e167eff0e4bce726ce8c373cb52a4fc9df5d65649cd1c9eba97adf15ac8 d5d27608ccab68ed4181e085f7c53c373395f6f707807f46effe7b929d31a5b696fbe78ab29e e9de654a8c9b895a464fe35cddaba5607efbb4eae4ee6cd03f0534307ab9fbbfae14 (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) State = 0xbb455463b84041259c77a610d5caea1f (10) Finished request Waking up in 3.9 seconds. (11) Received Access-Request Id 125 from 10.100.0.16:1645 to 10.101.0.20:1812 length 421 (11) User-Name = "anonymous" (11) Service-Type = Framed-User (11) Cisco-AVPair = "service-type=Framed" (11) Framed-MTU = 1500 (11) Called-Station-Id = "1C-1D-86-68-F0-05" (11) Calling-Station-Id = "10-65-30-0F-CF-AD" (11) EAP-Message = 0x020500a0158000000096140303000101170303004518b03cdd7a3d877bd60d15b6c2d39bab 0896169fa3a2785f9e9c7d9ce2bdf71a87f5a05131f4e1d69945506abd38566012c910e16c52 13ad8f23f8a05a0ad3f3e8f7f93604170303004108be289a7c3651f4ccd6edf31fc1cc525c81 7e1950bf1645734a55231d01342bfb85f7c5a84cbdec624146ace4253f22f1605faba5d4ba6c 154c38ff03b80de5a2 (11) Message-Authenticator = 0xe7411a65948c81a8068f05ec25501b56 (11) Cisco-AVPair = "audit-session-id=0A64001000000151077D98D2" (11) Cisco-AVPair = "method=dot1x" (11) Framed-IP-Address = 10.111.0.176 (11) NAS-IP-Address = 10.100.0.16 (11) NAS-Port-Id = "GigabitEthernet0/5" (11) NAS-Port-Type = Ethernet (11) NAS-Port = 50105 (11) State = 0xbb455463b84041259c77a610d5caea1f (11) Restoring &session-state (11) &session-state:Framed-MTU = 1014 (11) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (11) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, ServerHello" (11) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 ChangeCipherSpec" (11) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, EncryptedExtensions" (11) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Certificate" (11) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, CertificateVerify" (11) &session-state:TLS-Session-Information = "(TLS) send TLS 1.3 Handshake, Finished" (11) # Executing section authorize from file /etc/raddb/sites-enabled/default (11) authorize { (11) policy filter_username { (11) if (&User-Name) { (11) if (&User-Name) -> TRUE (11) if (&User-Name) { (11) if (&User-Name =~ / /) { (11) if (&User-Name =~ / /) -> FALSE (11) if (&User-Name =~ /@[^@]*@/ ) { (11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (11) if (&User-Name =~ /\.\./ ) { (11) if (&User-Name =~ /\.\./ ) -> FALSE (11) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) { (11) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) -> FALSE (11) if (&User-Name =~ /\.$/) { (11) if (&User-Name =~ /\.$/) -> FALSE (11) if (&User-Name =~ <mailto:/@\./> /(a)\./) { (11) if (&User-Name =~ <mailto:/@\./> /(a)\./) -> FALSE (11) } # if (&User-Name) = notfound (11) } # policy filter_username = notfound (11) [preprocess] = ok (11) [chap] = noop (11) [mschap] = noop (11) [digest] = noop (11) suffix: Checking for suffix after "@" (11) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (11) suffix: No such realm "NULL" (11) [suffix] = noop (11) eap: Peer sent EAP Response (code 2) ID 5 length 160 (11) eap: Continuing tunnel setup (11) [eap] = ok (11) } # authorize = ok (11) Found Auth-Type = eap (11) # Executing group from file /etc/raddb/sites-enabled/default (11) authenticate { (11) eap: Expiring EAP session with state 0xbb455463b8404125 (11) eap: Finished EAP session with state 0xbb455463b8404125 (11) eap: Previous EAP request found for state 0xbb455463b8404125, released from the list (11) eap: Peer sent packet with method EAP TTLS (21) (11) eap: Calling submodule eap_ttls to process data (11) eap_ttls: Authenticate (11) eap_ttls: (TLS) EAP Peer says that the final record size will be 150 bytes (11) eap_ttls: (TLS) EAP Got all data (150 bytes) (11) eap_ttls: (TLS) Handshake state - Server TLSv1.3 early data (11) eap_ttls: (TLS) recv TLS 1.3 Handshake, Finished (11) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read finished (11) eap_ttls: (TLS) Handshake state - SSLv3/TLS write session ticket (11) eap_ttls: Serialising session 630d327a8dd0ab555038688964549f6090d80b50941ec0460f30dc622db74911, and storing in cache (11) eap_ttls: WARNING: (TLS) Wrote session 630d327a8dd0ab555038688964549f6090d80b50941ec0460f30dc622db74911 to /var/log/radius/tlscache/630d327a8dd0ab555038688964549f6090d80b50941ec0460f3 0dc622db74911.asn1 (140 bytes) (11) eap_ttls: (TLS) send TLS 1.3 Handshake, NewSessionTicket (11) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write session ticket (11) eap_ttls: (TLS) recv TLS 1.3 Handshake, NewSessionTicket (11) eap_ttls: Session established. Proceeding to decode tunneled attributes (11) eap_ttls: Got tunneled request (11) eap_ttls: User-Name = "fvercourt" (11) eap_ttls: User-Password = "xC#8z7p6DDB8?a67ctQ7" (11) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (11) eap_ttls: Sending tunneled request (11) Virtual server inner-tunnel received request (11) User-Name = "<< user_name >>" (11) User-Password = "<< secret >>" (11) FreeRADIUS-Proxied-To = 127.0.0.1 (11) Service-Type = Framed-User (11) Cisco-AVPair = "service-type=Framed" (11) Cisco-AVPair = "audit-session-id=0A64001000000151077D98D2" (11) Cisco-AVPair = "method=dot1x" (11) Framed-MTU = 1500 (11) Called-Station-Id = "1C-1D-86-68-F0-05" (11) Calling-Station-Id = "10-65-30-0F-CF-AD" (11) Framed-IP-Address = 10.111.0.176 (11) NAS-IP-Address = 10.100.0.16 (11) NAS-Port-Id = "GigabitEthernet0/5" (11) NAS-Port-Type = Ethernet (11) NAS-Port = 50105 (11) Event-Timestamp = "Jan 23 2023 15:52:03 CET" (11) server inner-tunnel { (11) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (11) authorize { (11) policy filter_username { (11) if (&User-Name) { (11) if (&User-Name) -> TRUE (11) if (&User-Name) { (11) if (&User-Name =~ / /) { (11) if (&User-Name =~ / /) -> FALSE (11) if (&User-Name =~ /@[^@]*@/ ) { (11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (11) if (&User-Name =~ /\.\./ ) { (11) if (&User-Name =~ /\.\./ ) -> FALSE (11) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) { (11) if ((&User-Name =~ /@/) && (&User-Name !~ <mailto:/@(.+)\.(.+)$/)> /(a)(.+)\.(.+)$/)) -> FALSE (11) if (&User-Name =~ /\.$/) { (11) if (&User-Name =~ /\.$/) -> FALSE (11) if (&User-Name =~ <mailto:/@\./> /(a)\./) { (11) if (&User-Name =~ <mailto:/@\./> /(a)\./) -> FALSE (11) } # if (&User-Name) = notfound (11) } # policy filter_username = notfound (11) [chap] = noop (11) [mschap] = noop (11) suffix: Checking for suffix after "@" (11) suffix: No '@' in User-Name = "<< user_name >>", looking up realm NULL (11) suffix: No such realm "NULL" (11) [suffix] = noop (11) update control { (11) &Proxy-To-Realm := LOCAL (11) } # update control = noop (11) eap: No EAP-Message, not doing EAP (11) [eap] = noop (11) [files] = noop rlm_ldap (ldap_dauphine): Reserved connection (2) (11) ldap_dauphine: EXPAND (|(supannAliasLogin=%{%{Stripped-User-Name}:-%{User-Name}}) (mail=%{%{Stripped-User-Name}:-%{User-Name}}) (mail=%{%{Stripped-User-Name}:-%{User-Name}}@dauphine.fr)) (11) ldap_dauphine: --> (|(supannAliasLogin="<< user_name >>") (mail="<< user_name >>") (mail="<< user_name >>"@dauphine.fr)) (11) ldap_dauphine: Performing search in "ou=people,dc=dauphine,dc=fr" with filter "(|(supannAliasLogin="<< user_name >>") (mail="<< user_name >>") (mail="<< user_name >>"@dauphine.fr))", scope "sub" (11) ldap_dauphine: Waiting for search result... rlm_ldap (ldap_dauphine): Reconnecting (2) rlm_ldap (ldap_dauphine): Connecting to ldap://ldap.dauphine.fr:389 rlm_ldap (ldap_dauphine): Waiting for bind result... rlm_ldap (ldap_dauphine): Bind successful (11) ldap_dauphine: WARNING: Search failed: Can't contact LDAP server. Got new socket, retrying... (11) ldap_dauphine: Waiting for search result... (11) ldap_dauphine: User object found at DN "uid=00061572,ou=people,dc=dauphine,dc=fr" (11) ldap_dauphine: Processing user attributes (11) ldap_dauphine: control:Password-With-Header += '<< passord_HASH >>’ rlm_ldap (ldap_dauphine): Released connection (2) rlm_ldap (ldap_dauphine): You probably need to lower "min" rlm_ldap (ldap_dauphine): Closing expired connection (4) - Hit idle_timeout limit rlm_ldap (ldap_dauphine): You probably need to lower "min" rlm_ldap (ldap_dauphine): Closing expired connection (3) - Hit idle_timeout limit rlm_ldap (ldap_dauphine): You probably need to lower "min" rlm_ldap (ldap_dauphine): Closing expired connection (0) - Hit idle_timeout limit (11) [ldap_dauphine] = updated (11) [expiration] = noop (11) [logintime] = noop (11) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password (11) pap: Removing &control:Password-With-Header (11) pap: Normalizing SSHA1-Password from base64 encoding, 32 bytes -> 24 bytes (11) [pap] = updated (11) } # authorize = updated (11) Found Auth-Type = PAP (11) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (11) Auth-Type PAP { (11) pap: Login attempt with password (11) pap: Comparing with "known-good" SSHA-Password (11) pap: User authenticated successfully (11) [pap] = ok (11) } # Auth-Type PAP = ok (11) # Executing section post-auth from file /etc/raddb/sites-enabled/inner-tunnel (11) post-auth { (11) if (0) { (11) if (0) -> FALSE (11) } # post-auth = noop (11) Login OK: ["<< user_name >>"] (from client edouard port 50105 cli 10-65-30-0F-CF-AD via TLS tunnel) (11) } # server inner-tunnel (11) Virtual server sending reply (11) eap_ttls: Got tunneled Access-Accept (11) eap_ttls: (TLS) cache - Setting up attributes for session resumption (11) eap_ttls: caching EAP-Type = TTLS (11) eap_ttls: Saving session 630d327a8dd0ab555038688964549f6090d80b50941ec0460f30dc622db74911 in the disk cache (11) eap: Sending EAP Success (code 3) ID 5 length 4 (11) eap: Freeing handler (11) [eap] = ok (11) } # authenticate = ok (11) # Executing section post-auth from file /etc/raddb/sites-enabled/default (11) post-auth { (11) update reply { (11) Tunnel-type = VLAN (11) Tunnel-medium-type = IEEE-802 (11) Tunnel-Private-Group-Id = 333 (11) } # update reply = noop (11) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (11) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (11) update { (11) &reply::Framed-MTU += &session-state:Framed-MTU[*] -> 1014 (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) recv TLS 1.3 Handshake, ClientHello' (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.3 Handshake, ServerHello' (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.3 ChangeCipherSpec' (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.3 Handshake, EncryptedExtensions' (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.3 Handshake, Certificate' (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.3 Handshake, CertificateVerify' (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.3 Handshake, Finished' (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) recv TLS 1.3 Handshake, Finished' (11) &reply::TLS-Cache-Filename += &session-state:TLS-Cache-Filename[*] -> '/var/log/radius/tlscache/630d327a8dd0ab555038688964549f6090d80b50941ec0460f 30dc622db74911.asn1' (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.3 Handshake, NewSessionTicket' (11) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) recv TLS 1.3 Handshake, NewSessionTicket' (11) } # update = noop (11) [exec] = noop (11) policy remove_reply_message_if_eap { (11) if (&reply:EAP-Message && &reply:Reply-Message) { (11) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (11) else { (11) [noop] = noop (11) } # else = noop (11) } # policy remove_reply_message_if_eap = noop (11) if (EAP-Key-Name && &reply:EAP-Session-Id) { (11) if (EAP-Key-Name && &reply:EAP-Session-Id) -> FALSE (11) } # post-auth = noop (11) Login OK: [anonymous] (from client edouard port 50105 cli 10-65-30-0F-CF-AD) (11) Sent Access-Accept Id 125 from 10.101.0.20:1812 to 10.100.0.16:1645 length 195 (11) MS-MPPE-Recv-Key = 0x971459cad430f53406113b465e8c9823c41fc43a70860e1a4e13d42ebb1bb5df (11) MS-MPPE-Send-Key = 0x689cf83adf94820be1e34f1507c3856aa88dd9f210d177af62a82344aea19fc9 (11) EAP-Message = 0x03050004 (11) Message-Authenticator = 0x00000000000000000000000000000000 (11) User-Name = "anonymous" (11) Tunnel-Type = VLAN (11) Tunnel-Medium-Type = IEEE-802 (11) Tunnel-Private-Group-Id = "333" (11) Framed-MTU += 1014 (11) Finished request Waking up in 3.9 seconds. (12) Received Accounting-Request Id 79 from 10.100.0.16:1646 to 10.101.0.20:1813 length 229 (12) Framed-IP-Address = 10.111.0.176 (12) User-Name = "anonymous" (12) Cisco-AVPair = "audit-session-id=0A64001000000151077D98D2" (12) Cisco-AVPair = "vlan-id=333" (12) Cisco-AVPair = "method=dot1x" (12) Called-Station-Id = "1C-1D-86-68-F0-05" (12) Calling-Station-Id = "10-65-30-0F-CF-AD" (12) NAS-IP-Address = 10.100.0.16 (12) NAS-Port-Id = "GigabitEthernet0/5" (12) NAS-Port-Type = Ethernet (12) NAS-Port = 50105 (12) Acct-Session-Id = "0000007F" (12) Acct-Status-Type = Start (12) Event-Timestamp = "Jan 23 2023 15:52:04 CET" (12) Acct-Delay-Time = 0 (12) # Executing section preacct from file /etc/raddb/sites-enabled/default (12) preacct { (12) [preprocess] = ok (12) policy acct_unique { (12) update request { (12) &Tmp-String-9 := "ai:" (12) } # update request = noop (12) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (12) EXPAND %{hex:&Class} (12) --> (12) EXPAND ^%{hex:&Tmp-String-9} (12) --> ^61693a (12) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (12) else { (12) update request { (12) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Addres s}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (12) --> 7fa8680a9de8af271866a0b2a998c629 (12) &Acct-Unique-Session-Id := 7fa8680a9de8af271866a0b2a998c629 (12) } # update request = noop (12) } # else = noop (12) update request { (12) &Tmp-String-9 !* ANY (12) } # update request = noop (12) } # policy acct_unique = noop (12) suffix: Checking for suffix after "@" (12) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (12) suffix: No such realm "NULL" (12) [suffix] = noop (12) [files] = noop (12) } # preacct = ok (12) # Executing section accounting from file /etc/raddb/sites-enabled/default (12) accounting { (12) detail: EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addres s}}/detail-%Y%m%d (12) detail: --> /var/log/radius/radacct/10.100.0.16/detail-20230123 (12) detail: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Addres s}}/detail-%Y%m%d expands to /var/log/radius/radacct/10.100.0.16/detail-20230123 (12) detail: EXPAND %t (12) detail: --> Mon Jan 23 15:52:04 2023 (12) [detail] = ok (12) [unix] = ok (12) [exec] = noop (12) attr_filter.accounting_response: EXPAND %{User-Name} (12) attr_filter.accounting_response: --> anonymous (12) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (12) [attr_filter.accounting_response] = updated (12) } # accounting = updated (12) Sent Accounting-Response Id 79 from 10.101.0.20:1813 to 10.100.0.16:1646 length 20 (12) Finished request (12) Cleaning up request packet ID 79 with timestamp +259 due to done Waking up in 2.8 seconds. (7) Cleaning up request packet ID 121 with timestamp +258 due to cleanup_delay was reached (8) Cleaning up request packet ID 122 with timestamp +258 due to cleanup_delay was reached (9) Cleaning up request packet ID 123 with timestamp +258 due to cleanup_delay was reached (10) Cleaning up request packet ID 124 with timestamp +258 due to cleanup_delay was reached (11) Cleaning up request packet ID 125 with timestamp +258 due to cleanup_delay was reached Thank you all for your help and advice, Florent VERCOURT

3 2

FR 3.0.26 and TLS 1.3
by Chris Howley 23 Jan '23

23 Jan '23

Hello Support team, I recently download the FR packages from your CentOS 7 repository, and I noticed that the 3.0.26 server was built with OpenSSL 1.0.2k (see below). Should the server be built with OpenSSL 1.1.1 to support TLS 1.3? Please excuse my ignorance if I've asked a stupid question. Thanks, Chris Howley Mon Jan 23 13:50:17 2023 : Debug: Server was built with: Mon Jan 23 13:50:17 2023 : Debug: accounting : yes Mon Jan 23 13:50:17 2023 : Debug: authentication : yes Mon Jan 23 13:50:17 2023 : Debug: ascend-binary-attributes : yes Mon Jan 23 13:50:17 2023 : Debug: coa : yes Mon Jan 23 13:50:17 2023 : Debug: control-socket : yes Mon Jan 23 13:50:17 2023 : Debug: detail : yes Mon Jan 23 13:50:17 2023 : Debug: dhcp : yes Mon Jan 23 13:50:17 2023 : Debug: dynamic-clients : yes Mon Jan 23 13:50:17 2023 : Debug: osfc2 : no Mon Jan 23 13:50:17 2023 : Debug: proxy : yes Mon Jan 23 13:50:17 2023 : Debug: regex-pcre : yes Mon Jan 23 13:50:17 2023 : Debug: regex-posix : no Mon Jan 23 13:50:17 2023 : Debug: regex-posix-extended : no Mon Jan 23 13:50:17 2023 : Debug: session-management : yes Mon Jan 23 13:50:17 2023 : Debug: stats : yes Mon Jan 23 13:50:17 2023 : Debug: systemd : yes Mon Jan 23 13:50:17 2023 : Debug: tcp : yes Mon Jan 23 13:50:17 2023 : Debug: threads : yes Mon Jan 23 13:50:17 2023 : Debug: tls : yes Mon Jan 23 13:50:17 2023 : Debug: unlang : yes Mon Jan 23 13:50:17 2023 : Debug: vmps : yes Mon Jan 23 13:50:17 2023 : Debug: developer : no Mon Jan 23 13:50:17 2023 : Debug: Server core libs: Mon Jan 23 13:50:17 2023 : Debug: freeradius-server : 3.0.26 Mon Jan 23 13:50:17 2023 : Debug: talloc : 2.1.* Mon Jan 23 13:50:17 2023 : Debug: ssl : 1.0.2k release Mon Jan 23 13:50:17 2023 : Debug: pcre : 8.32 2012-11-30 Mon Jan 23 13:50:17 2023 : Debug: Endianness: Mon Jan 23 13:50:17 2023 : Debug: little Mon Jan 23 13:50:17 2023 : Debug: Compilation flags: Mon Jan 23 13:50:17 2023 : Debug: cppflags : Mon Jan 23 13:50:17 2023 : Debug: cflags : -I. -Isrc -include src/freeradius-devel/autoconf.h -include src/freeradius-devel/build.h -include src/freeradius-devel/featur es.h -include src/freeradius-devel/radpaths.h -fno-strict-aliasing -Wno-date-time -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=s sp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -Wall -std=c99 -D_GNU_SOURCE -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -DNDEBUG -DIS_MODULE=1 Mon Jan 23 13:50:17 2023 : Debug: ldflags : -Wl,--build-id Mon Jan 23 13:50:17 2023 : Debug: libs : -lcrypto -lssl -ltalloc -lpcre -lnsl -lresolv -ldl -lpthread -lreadline Mon Jan 23 13:50:17 2023 : Debug: Mon Jan 23 13:50:17 2023 : Info: FreeRADIUS Version 3.0.26

2 1

Resuming session cached with EAP-TTLS
by florent Vercourt 23 Jan '23

23 Jan '23

1 0

Queue Statistics always showing 0
by Ashraf Al-Basti 23 Jan '23

23 Jan '23

Hi, I'm trying to get Freeradius statistics but I can see that the Queue statistics are always 0. I tried to add some delay between the Freeradius server and the back-end to force the server to queue the packets and I can see in the log files that the queue is full and can't handle more requests, but still, the statistics show 0 queues, what could be the problem? Freeardius version 3.2.1-1 Mon Jan 23 01:36:19 2023 : Error: !!! ERROR !!! Failed inserting request 586295 into the queue Mon Jan 23 01:36:20 2023 : Error: !!! ERROR !!! Failed inserting request 586296 into the queue Mon Jan 23 01:36:20 2023 : Error: !!! ERROR !!! Failed inserting request 586297 into the queue Mon Jan 23 01:36:20 2023 : Error: !!! ERROR !!! Failed inserting request 586298 into the queue Mon Jan 23 01:36:20 2023 : Error: !!! ERROR !!! Failed inserting request 586299 into the queue Mon Jan 23 01:36:20 2023 : Error: 1 requests have been waiting in the processing queue for 7 seconds. Check that all databases are running properly! Mon Jan 23 01:36:20 2023 : Error: !!! ERROR !!! Failed inserting request 586321 into the queue Mon Jan 23 01:36:20 2023 : Error: !!! ERROR !!! Failed inserting request 586322 into the queue Mon Jan 23 01:36:25 2023 : Error: Received conflicting packet from client vMX1 port 40710 - ID: 33 due to unfinished request in module <queue>. Giving up on old request. [root@localhost dropwatch]# echo "Message-Authenticator = 0x00,FreeRADIUS-Statistics-Type = 19" | radclient -x localhost:18121 status adminsecret Sent Status-Server Id 101 from 0.0.0.0:45296 to 127.0.0.1:18121 length 50 Message-Authenticator = 0x00 FreeRADIUS-Statistics-Type = 19 Received Access-Accept Id 101 from 127.0.0.1:18121 to 127.0.0.1:45296 length 356 FreeRADIUS-Total-Access-Requests = 7 FreeRADIUS-Total-Access-Accepts = 0 FreeRADIUS-Total-Access-Rejects = 0 FreeRADIUS-Total-Access-Challenges = 0 FreeRADIUS-Total-Auth-Responses = 0 FreeRADIUS-Total-Auth-Duplicate-Requests = 0 FreeRADIUS-Total-Auth-Malformed-Requests = 0 FreeRADIUS-Total-Auth-Invalid-Requests = 0 FreeRADIUS-Total-Auth-Dropped-Requests = 0 FreeRADIUS-Total-Auth-Unknown-Types = 0 FreeRADIUS-Total-Auth-Conflicts = 0 FreeRADIUS-Total-Accounting-Requests = 655923 FreeRADIUS-Total-Accounting-Responses = 583903 FreeRADIUS-Total-Acct-Duplicate-Requests = 0 FreeRADIUS-Total-Acct-Malformed-Requests = 0 FreeRADIUS-Total-Acct-Invalid-Requests = 0 FreeRADIUS-Total-Acct-Dropped-Requests = 27543 FreeRADIUS-Total-Acct-Unknown-Types = 0 FreeRADIUS-Total-Acct-Conflicts = 343 FreeRADIUS-Stats-Start-Time = "Jan 23 2023 01:16:33 EST" FreeRADIUS-Stats-HUP-Time = "Jan 23 2023 01:16:33 EST" FreeRADIUS-Queue-Len-Internal = 0 FreeRADIUS-Queue-Len-Proxy = 0 FreeRADIUS-Queue-Len-Auth = 0 * FreeRADIUS-Queue-Len-Acct = 0* FreeRADIUS-Queue-Len-Detail = 0 FreeRADIUS-Queue-PPS-In = 0 FreeRADIUS-Queue-PPS-Out = 0 -- Best regards, Ashraf Al-Basti

2 1

unlang idiom for removing superfluous attributes?
by Brian Julin 22 Jan '23

22 Jan '23

I was pondering rewriting my rlm_attr_filter sets as unlang policy. If there is an elegant way in unlang to remove all attributes from a list except the ones you want, I'm having trouble finding it. In unlang you seem to need to know the name of an attribute to do anything to it. If there was a temporary list, one could maybe (not sure if !* ANY works on lists): update { &tmp: !* ANY &tmp: += &reply: &reply: !* ANY } update reply { # add the ones you want back in from &tmp:, perhaps with alterations } ... but so far I only have found the Tmp-* attributes, no temporary list. Maybe this is just one of the cases where we still need rlm_attr_filter? Or maybe someone with more unlang-foo than me knows a magic incantation?

2 1

EAP-TLS: check TLS-Client-Cert with unlang
by Stefan Hartmann 17 Jan '23

17 Jan '23

Hi list, I updated freeradius on an Devuan machine from 3.0.17 to 3.2.1. Formerly I checked the client certificate in the virtual server check-eap-tls with the following unlang construct to extract the real User-Name from the certificate: ... if ((&TLS-Client-Cert-Subject-Alt-Name-Email) && (&TLS-Client-Cert-Subject-Alt-Name-Email =~ /@/)) { update request { &User-Name := &TLS-Client-Cert-Subject-Alt-Name-Email } } elsif (&TLS-Client-Cert-Common-Name) { update request { &User-Name := &TLS-Client-Cert-Common-Name } } else { reject } ... In the client certificate file there is also the root ca certificate, and in the former version the second certificate was the client certificate and the code evaluates correct without thoroughly thinking about. Now, the attributes like TLS-Client-Cert-Serial evaluate to the first certificate ie the root ca certificate and the above unlang code return the false User-Name. I want to improve the code and need some hints. I want to iterate over eg &TLS-Client-Cert-Serial[*], search the cert with &TLS-Client-Cert-X509v3-Basic-Constraints[i] =~ /CA:FALSE/, and then extract the User-Name from &TLS-Client-Cert-Subject-Alt-Name-Email[i] or &TLS-Client-Cert-Common-Name[i] How can I get the correct index i from eg foreach &TLS-Client-Cert-Serial to reference to the &TLS-Client-Cert-Subject-Alt-Name-Email[i], for example. A quick fix was to use [n] and choose the last certificate in the file, but this is not clean. -- stefan hartmann

3 3

TLS v1.3
by Paul Bone 17 Jan '23

17 Jan '23

Hi, I have a freeradius server running v3.0.16 which is performing WPA2 Enterprise Authentication and VLAN assignment for a multi-tenant WiFi system. The latest windows 11 update appears to have forced the use of TLS1.3 and clients will no longer authenticate without a registry change back to TLS1.2. I don't have in-depth knowledge of Freeradius; I can install, configure and work with config files and debugs, so was just asking for a little advice on the best way for me to enable TLS1.3? Do I need to upgrade? Will there be any configuration changes required? Obviously we still need to support lower TLS versions as well. Internet searches have given me conflicting information, and I can't find when TLS 1.3 support started. Thanks Paul Bone Network Consultant/Engineer

4 9

freeradius 3.0 with its local user database + Cisco WLC + PEAP
by Maciej Waliszko 17 Jan '23

17 Jan '23

Hello, I am trying to configure the above. Here is what I have done so far. 1) Cisco WLC was configured 2) freeradius 3.0 was installed on a Debian machine a) Cisco WLC IPv4 address was added as a client to freeradius /etc/freeradius/3.0/clients.conf b) A few local users were added to users file /etc/freeradius/3.0/users 3) whenever I try to use the below command on WLC test aaa group radius joe.doe pa44w0rd new-code I am successfully authenticated. However this is going as PAP. 4) any request from the wifi client is not going through cause it is PEAP-MSCHAP Currently 'freeradius -X' gives me the following (39) Cisco-AVPair = "vlan-id=101" (39) NAS-IP-Address = 172.16.100.10 (39) NAS-Port-Id = "capwap_90000004" (39) NAS-Port-Type = Wireless-802.11 (39) NAS-Port = 5 (39) State = 0x8afb70f28ffc69b5cf854ba7abc363a9 (39) Cisco-AVPair = "cisco-wlan-ssid=NEFO1x" (39) Cisco-AVPair = "wlan-profile-name=NEFO-802.1x" (39) Called-Station-Id = "24-36-da-17-30-00:NEFO1x" (39) Calling-Station-Id = "7a-be-3e-4d-a8-62" (39) Airespace-Wlan-Id = 4 (39) NAS-Identifier = "WLC9120-NEFO" (39) WLAN-Group-Cipher = 1027076 (39) WLAN-Pairwise-Cipher = 1027076 (39) WLAN-AKM-Suite = 1027075 (39) WLAN-Group-Mgmt-Cipher = 1027078 (39) session-state: No cached attributes (39) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (39) authorize { (39) policy filter_username { (39) if (&User-Name) { (39) if (&User-Name) -> TRUE (39) if (&User-Name) { (39) if (&User-Name =~ / /) { (39) if (&User-Name =~ / /) -> FALSE (39) if (&User-Name =~ /@[^@]*@/ ) { (39) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (39) if (&User-Name =~ /\.\./ ) { (39) if (&User-Name =~ /\.\./ ) -> FALSE (39) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (39) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (39) if (&User-Name =~ /\.$/) { (39) if (&User-Name =~ /\.$/) -> FALSE (39) if (&User-Name =~ /(a)\./) { (39) if (&User-Name =~ /(a)\./) -> FALSE (39) } # if (&User-Name) = notfound (39) } # policy filter_username = notfound (39) [preprocess] = ok (39) [chap] = noop (39) [mschap] = noop (39) [digest] = noop (39) suffix: Checking for suffix after "@" (39) suffix: No '@' in User-Name = "joe.doe", looking up realm NULL (39) suffix: No such realm "NULL" (39) [suffix] = noop (39) eap: Peer sent EAP Response (code 2) ID 7 length 51 (39) eap: Continuing tunnel setup (39) [eap] = ok (39) } # authorize = ok (39) Found Auth-Type = eap (39) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (39) authenticate { (39) eap: Expiring EAP session with state 0x8afb70f28ffc69b5 (39) eap: Finished EAP session with state 0x8afb70f28ffc69b5 (39) eap: Previous EAP request found for state 0x8afb70f28ffc69b5, released from the list (39) eap: Peer sent packet with method EAP PEAP (25) (39) eap: Calling submodule eap_peap to process data (39) eap_peap: Continuing EAP-TLS (39) eap_peap: [eaptls verify] = ok (39) eap_peap: Done initial handshake (39) eap_peap: [eaptls process] = ok (39) eap_peap: Session established. Decoding tunneled attributes (39) eap_peap: PEAP state WAITING FOR INNER IDENTITY (39) eap_peap: Identity - joe.doe (39) eap_peap: Got inner identity 'joe.doe' (39) eap_peap: Setting default EAP type for tunneled EAP session (39) eap_peap: Got tunneled request (39) eap_peap: EAP-Message = 0x02070014016d616369656a2e77616c69737a6b6f (39) eap_peap: Setting User-Name to joe.doe (39) eap_peap: Sending tunneled request to inner-tunnel (39) eap_peap: EAP-Message = 0x02070014016d616369656a2e77616c69737a6b6f (39) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (39) eap_peap: User-Name = "joe.doe" (39) Virtual server inner-tunnel received request (39) EAP-Message = 0x02070014016d616369656a2e77616c69737a6b6f (39) FreeRADIUS-Proxied-To = 127.0.0.1 (39) User-Name = "joe.doe" (39) WARNING: Outer and inner identities are the same. User privacy is compromised. (39) server inner-tunnel { (39) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (39) authorize { (39) policy filter_username { (39) if (&User-Name) { (39) if (&User-Name) -> TRUE (39) if (&User-Name) { (39) if (&User-Name =~ / /) { (39) if (&User-Name =~ / /) -> FALSE (39) if (&User-Name =~ /@[^@]*@/ ) { (39) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (39) if (&User-Name =~ /\.\./ ) { (39) if (&User-Name =~ /\.\./ ) -> FALSE (39) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (39) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (39) if (&User-Name =~ /\.$/) { (39) if (&User-Name =~ /\.$/) -> FALSE (39) if (&User-Name =~ /(a)\./) { (39) if (&User-Name =~ /(a)\./) -> FALSE (39) } # if (&User-Name) = notfound (39) } # policy filter_username = notfound (39) [chap] = noop (39) [mschap] = noop (39) suffix: Checking for suffix after "@" (39) suffix: No '@' in User-Name = "joe.doe", looking up realm NULL (39) suffix: No such realm "NULL" (39) [suffix] = noop (39) update control { (39) &Proxy-To-Realm := LOCAL (39) } # update control = noop (39) eap: Peer sent EAP Response (code 2) ID 7 length 20 (39) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (39) [eap] = ok (39) } # authorize = ok (39) Found Auth-Type = eap (39) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (39) authenticate { (39) eap: Peer sent packet with method EAP Identity (1) (39) eap: Calling submodule eap_mschapv2 to process data (39) eap_mschapv2: Issuing Challenge (39) eap: Sending EAP Request (code 1) ID 8 length 43 (39) eap: EAP session adding &reply:State = 0xa779f0bba771eab5 (39) [eap] = handled (39) } # authenticate = handled (39) } # server inner-tunnel (39) Virtual server sending reply (39) EAP-Message = 0x0108002b1a01080026102e31c720efcc97f1b1344319c2717f10667265657261646975732d332e302e3137 (39) Message-Authenticator = 0x00000000000000000000000000000000 (39) State = 0xa779f0bba771eab5fa1472a70f642a70 (39) eap_peap: Got tunneled reply code 11 (39) eap_peap: EAP-Message = 0x0108002b1a01080026102e31c720efcc97f1b1344319c2717f10667265657261646975732d332e302e3137 (39) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (39) eap_peap: State = 0xa779f0bba771eab5fa1472a70f642a70 (39) eap_peap: Got tunneled reply RADIUS code 11 (39) eap_peap: EAP-Message = 0x0108002b1a01080026102e31c720efcc97f1b1344319c2717f10667265657261646975732d332e302e3137 (39) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (39) eap_peap: State = 0xa779f0bba771eab5fa1472a70f642a70 (39) eap_peap: Got tunneled Access-Challenge (39) eap: Sending EAP Request (code 1) ID 8 length 74 (39) eap: EAP session adding &reply:State = 0x8afb70f28cf369b5 (39) [eap] = handled (39) } # authenticate = handled (39) Using Post-Auth-Type Challenge (39) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (39) Challenge { ... } # empty sub-section is ignored (39) Sent Access-Challenge Id 249 from 10.222.34.11:1812 to 172.16.100.10:65092 length 0 (39) EAP-Message = 0x0108004a1900170303003fcc5b8334628ab37aa89b123da75ca7c75fd530ecc021320acc07bdc59b19d161f36ee6151578b5fa7487e0d86eb2dee898bde53e74baca61f9c67ccd045dc0 (39) Message-Authenticator = 0x00000000000000000000000000000000 (39) State = 0x8afb70f28cf369b5cf854ba7abc363a9 (39) Finished request Waking up in 4.9 seconds. (38) Cleaning up request packet ID 248 with timestamp +985 (40) Received Access-Request Id 248 from 172.16.100.10:65092 to 10.222.34.11:1812 length 538 (40) User-Name = "joe.doe" (40) Service-Type = Framed-User (40) Cisco-AVPair = "service-type=Framed" (40) Framed-MTU = 1485 (40) EAP-Message = 0x020800691900170303005e89bf7fdf3bb86e3e467aef6b8988848fce28ba903c8c18014db6390e35aea1dfefd7abf64b8bc29c5f574a83dc3a850169b6de84430922b3617bbd5bef2f8ab879603c7c43c1940ed4e61b724f2bfde0d24c7f7c8fc3eb9c05f74ce8cccd (40) Message-Authenticator = 0x928deedf5800d89e75d47b6c4ff5f004 (40) Cisco-AVPair = "audit-session-id=0A6410AC00001FAE74DE0A43" (40) Cisco-AVPair = "method=dot1x" (40) Cisco-AVPair = "client-iif-id=2852134698" (40) Cisco-AVPair = "vlan-id=101" (40) NAS-IP-Address = 172.16.100.10 (40) NAS-Port-Id = "capwap_90000004" (40) NAS-Port-Type = Wireless-802.11 (40) NAS-Port = 5 (40) State = 0x8afb70f28cf369b5cf854ba7abc363a9 (40) Cisco-AVPair = "cisco-wlan-ssid=NEFO1x" (40) Cisco-AVPair = "wlan-profile-name=NEFO-802.1x" (40) Called-Station-Id = "24-36-da-17-30-00:NEFO1x" (40) Calling-Station-Id = "7a-be-3e-4d-a8-62" (40) Airespace-Wlan-Id = 4 (40) NAS-Identifier = "WLC9120-NEFO" (40) WLAN-Group-Cipher = 1027076 (40) WLAN-Pairwise-Cipher = 1027076 (40) WLAN-AKM-Suite = 1027075 (40) WLAN-Group-Mgmt-Cipher = 1027078 (40) session-state: No cached attributes (40) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (40) authorize { (40) policy filter_username { (40) if (&User-Name) { (40) if (&User-Name) -> TRUE (40) if (&User-Name) { (40) if (&User-Name =~ / /) { (40) if (&User-Name =~ / /) -> FALSE (40) if (&User-Name =~ /@[^@]*@/ ) { (40) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (40) if (&User-Name =~ /\.\./ ) { (40) if (&User-Name =~ /\.\./ ) -> FALSE (40) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (40) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (40) if (&User-Name =~ /\.$/) { (40) if (&User-Name =~ /\.$/) -> FALSE (40) if (&User-Name =~ /(a)\./) { (40) if (&User-Name =~ /(a)\./) -> FALSE (40) } # if (&User-Name) = notfound (40) } # policy filter_username = notfound (40) [preprocess] = ok (40) [chap] = noop (40) [mschap] = noop (40) [digest] = noop (40) suffix: Checking for suffix after "@" (40) suffix: No '@' in User-Name = "joe.doe", looking up realm NULL (40) suffix: No such realm "NULL" (40) [suffix] = noop (40) eap: Peer sent EAP Response (code 2) ID 8 length 105 (40) eap: Continuing tunnel setup (40) [eap] = ok (40) } # authorize = ok (40) Found Auth-Type = eap (40) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (40) authenticate { (40) eap: Expiring EAP session with state 0xa779f0bba771eab5 (40) eap: Finished EAP session with state 0x8afb70f28cf369b5 (40) eap: Previous EAP request found for state 0x8afb70f28cf369b5, released from the list (40) eap: Peer sent packet with method EAP PEAP (25) (40) eap: Calling submodule eap_peap to process data (40) eap_peap: Continuing EAP-TLS (40) eap_peap: [eaptls verify] = ok (40) eap_peap: Done initial handshake (40) eap_peap: [eaptls process] = ok (40) eap_peap: Session established. Decoding tunneled attributes (40) eap_peap: PEAP state phase2 (40) eap_peap: EAP method MSCHAPv2 (26) (40) eap_peap: Got tunneled request (40) eap_peap: EAP-Message = 0x0208004a1a0208004531ac16e2ad0f43ee8ec9bdd2aad3c5deda0000000000000000e4fff9f3543da30667451659b4a7598166306e0f8b66215c006d616369656a2e77616c69737a6b6f (40) eap_peap: Setting User-Name to joe.doe (40) eap_peap: Sending tunneled request to inner-tunnel (40) eap_peap: EAP-Message = 0x0208004a1a0208004531ac16e2ad0f43ee8ec9bdd2aad3c5deda0000000000000000e4fff9f3543da30667451659b4a7598166306e0f8b66215c006d616369656a2e77616c69737a6b6f (40) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (40) eap_peap: User-Name = "joe.doe" (40) eap_peap: State = 0xa779f0bba771eab5fa1472a70f642a70 (40) Virtual server inner-tunnel received request (40) EAP-Message = 0x0208004a1a0208004531ac16e2ad0f43ee8ec9bdd2aad3c5deda0000000000000000e4fff9f3543da30667451659b4a7598166306e0f8b66215c006d616369656a2e77616c69737a6b6f (40) FreeRADIUS-Proxied-To = 127.0.0.1 (40) User-Name = "joe.doe" (40) State = 0xa779f0bba771eab5fa1472a70f642a70 (40) WARNING: Outer and inner identities are the same. User privacy is compromised. (40) server inner-tunnel { (40) session-state: No cached attributes (40) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (40) authorize { (40) policy filter_username { (40) if (&User-Name) { (40) if (&User-Name) -> TRUE (40) if (&User-Name) { (40) if (&User-Name =~ / /) { (40) if (&User-Name =~ / /) -> FALSE (40) if (&User-Name =~ /@[^@]*@/ ) { (40) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (40) if (&User-Name =~ /\.\./ ) { (40) if (&User-Name =~ /\.\./ ) -> FALSE (40) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (40) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (40) if (&User-Name =~ /\.$/) { (40) if (&User-Name =~ /\.$/) -> FALSE (40) if (&User-Name =~ /(a)\./) { (40) if (&User-Name =~ /(a)\./) -> FALSE (40) } # if (&User-Name) = notfound (40) } # policy filter_username = notfound (40) [chap] = noop (40) [mschap] = noop (40) suffix: Checking for suffix after "@" (40) suffix: No '@' in User-Name = "joe.doe", looking up realm NULL (40) suffix: No such realm "NULL" (40) [suffix] = noop (40) update control { (40) &Proxy-To-Realm := LOCAL (40) } # update control = noop (40) eap: Peer sent EAP Response (code 2) ID 8 length 74 (40) eap: No EAP Start, assuming it's an on-going EAP conversation (40) [eap] = updated (40) files: users: Matched entry joe.doe at line 91 (40) [files] = ok rlm_ldap (ldap): Reserved connection (17) (40) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (40) ldap: --> (uid=joe.doe) (40) ldap: Performing search in "dc=netformers,dc=local" with filter "(uid=joe.doe)", scope "sub" (40) ldap: Waiting for search result... (40) ldap: User object found at DN "uid=joe.doe,dc=netformers,dc=local" (40) ldap: Processing user attributes rlm_ldap (ldap): Released connection (17) (40) [ldap] = ok (40) [expiration] = noop (40) [logintime] = noop (40) pap: WARNING: Auth-Type already set. Not setting to PAP (40) [pap] = noop (40) } # authorize = updated (40) Found Auth-Type = eap (40) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (40) authenticate { (40) eap: Expiring EAP session with state 0xa779f0bba771eab5 (40) eap: Finished EAP session with state 0xa779f0bba771eab5 (40) eap: Previous EAP request found for state 0xa779f0bba771eab5, released from the list (40) eap: Peer sent packet with method EAP MSCHAPv2 (26) (40) eap: Calling submodule eap_mschapv2 to process data (40) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (40) eap_mschapv2: authenticate { (40) mschap: Found Cleartext-Password, hashing to create NT-Password (40) mschap: Found Cleartext-Password, hashing to create LM-Password (40) mschap: Creating challenge hash with username: joe.doe (40) mschap: Client is using MS-CHAPv2 (40) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}: (40) mschap: EXPAND --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} (40) mschap: --> --username=joe.doe (40) mschap: Creating challenge hash with username: joe.doe (40) mschap: EXPAND --challenge=%{%{mschap:Challenge}:-00} (40) mschap: --> --challenge=ab5d475d8e18b55f (40) mschap: EXPAND --nt-response=%{%{mschap:NT-Response}:-00} (40) mschap: --> --nt-response=e4fff9f3543da30667451659b4a7598166306e0f8b66215c (40) mschap: ERROR: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)' (40) mschap: External script failed (40) mschap: ERROR: External script says: The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d) (40) mschap: ERROR: MS-CHAP2-Response is incorrect (40) [mschap] = reject (40) } # authenticate = reject (40) eap: Sending EAP Failure (code 4) ID 8 length 4 (40) eap: Freeing handler (40) [eap] = reject (40) } # authenticate = reject (40) Failed to authenticate the user (40) Using Post-Auth-Type Reject (40) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (40) Post-Auth-Type REJECT { (40) attr_filter.access_reject: EXPAND %{User-Name} (40) attr_filter.access_reject: --> joe.doe (40) attr_filter.access_reject: Matched entry DEFAULT at line 11 (40) [attr_filter.access_reject] = updated (40) update outer.session-state { (40) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: Program returned code (1) and output \'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)\'' (40) } # update outer.session-state = noop (40) } # Post-Auth-Type REJECT = updated (40) } # server inner-tunnel (40) Virtual server sending reply (40) MS-CHAP-Error = "\010E=691 R=1 C=1985ba6f4d3735081b98c08700af1b01 V=3 M=Authentication rejected" (40) EAP-Message = 0x04080004 (40) Message-Authenticator = 0x00000000000000000000000000000000 (40) eap_peap: Got tunneled reply code 3 (40) eap_peap: MS-CHAP-Error = "\010E=691 R=1 C=1985ba6f4d3735081b98c08700af1b01 V=3 M=Authentication rejected" (40) eap_peap: EAP-Message = 0x04080004 (40) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (40) eap_peap: Got tunneled reply RADIUS code 3 (40) eap_peap: MS-CHAP-Error = "\010E=691 R=1 C=1985ba6f4d3735081b98c08700af1b01 V=3 M=Authentication rejected" (40) eap_peap: EAP-Message = 0x04080004 (40) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (40) eap_peap: Tunneled authentication was rejected (40) eap_peap: FAILURE (40) eap: Sending EAP Request (code 1) ID 9 length 46 (40) eap: EAP session adding &reply:State = 0x8afb70f28df269b5 (40) [eap] = handled (40) } # authenticate = handled (40) Using Post-Auth-Type Challenge (40) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (40) Challenge { ... } # empty sub-section is ignored (40) session-state: Saving cached attributes (40) Module-Failure-Message := "mschap: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)'" (40) Sent Access-Challenge Id 248 from 10.222.34.11:1812 to 172.16.100.10:65092 length 0 (40) EAP-Message = 0x0109002e19001703030023cc5b8334628ab37bb472f1e4b99ece77d59027ce510b3ac1d5025c03cc60b794d73259 (40) Message-Authenticator = 0x00000000000000000000000000000000 (40) State = 0x8afb70f28df269b5cf854ba7abc363a9 (40) Finished request Waking up in 4.9 seconds. (39) Cleaning up request packet ID 249 with timestamp +985 (41) Received Access-Request Id 249 from 172.16.100.10:65092 to 10.222.34.11:1812 length 479 (41) User-Name = "joe.doe" (41) Service-Type = Framed-User (41) Cisco-AVPair = "service-type=Framed" (41) Framed-MTU = 1485 (41) EAP-Message = 0x0209002e1900170303002389bf7fdf3bb86e3fb7a4f82750437b28a44f01b7420ad299cf3bc0490d9e73ab33590b (41) Message-Authenticator = 0xa8d0b6155902a4394dfc46e21888f099 (41) Cisco-AVPair = "audit-session-id=0A6410AC00001FAE74DE0A43" (41) Cisco-AVPair = "method=dot1x" (41) Cisco-AVPair = "client-iif-id=2852134698" (41) Cisco-AVPair = "vlan-id=101" (41) NAS-IP-Address = 172.16.100.10 (41) NAS-Port-Id = "capwap_90000004" (41) NAS-Port-Type = Wireless-802.11 (41) NAS-Port = 5 (41) State = 0x8afb70f28df269b5cf854ba7abc363a9 (41) Cisco-AVPair = "cisco-wlan-ssid=NEFO1x" (41) Cisco-AVPair = "wlan-profile-name=NEFO-802.1x" (41) Called-Station-Id = "24-36-da-17-30-00:NEFO1x" (41) Calling-Station-Id = "7a-be-3e-4d-a8-62" (41) Airespace-Wlan-Id = 4 (41) NAS-Identifier = "WLC9120-NEFO" (41) WLAN-Group-Cipher = 1027076 (41) WLAN-Pairwise-Cipher = 1027076 (41) WLAN-AKM-Suite = 1027075 (41) WLAN-Group-Mgmt-Cipher = 1027078 (41) Restoring &session-state (41) &session-state:Module-Failure-Message := "mschap: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)'" (41) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (41) authorize { (41) policy filter_username { (41) if (&User-Name) { (41) if (&User-Name) -> TRUE (41) if (&User-Name) { (41) if (&User-Name =~ / /) { (41) if (&User-Name =~ / /) -> FALSE (41) if (&User-Name =~ /@[^@]*@/ ) { (41) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (41) if (&User-Name =~ /\.\./ ) { (41) if (&User-Name =~ /\.\./ ) -> FALSE (41) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (41) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (41) if (&User-Name =~ /\.$/) { (41) if (&User-Name =~ /\.$/) -> FALSE (41) if (&User-Name =~ /(a)\./) { (41) if (&User-Name =~ /(a)\./) -> FALSE (41) } # if (&User-Name) = notfound (41) } # policy filter_username = notfound (41) [preprocess] = ok (41) [chap] = noop (41) [mschap] = noop (41) [digest] = noop (41) suffix: Checking for suffix after "@" (41) suffix: No '@' in User-Name = "joe.doe", looking up realm NULL (41) suffix: No such realm "NULL" (41) [suffix] = noop (41) eap: Peer sent EAP Response (code 2) ID 9 length 46 (41) eap: Continuing tunnel setup (41) [eap] = ok (41) } # authorize = ok (41) Found Auth-Type = eap (41) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (41) authenticate { (41) eap: Expiring EAP session with state 0x8afb70f28df269b5 (41) eap: Finished EAP session with state 0x8afb70f28df269b5 (41) eap: Previous EAP request found for state 0x8afb70f28df269b5, released from the list (41) eap: Peer sent packet with method EAP PEAP (25) (41) eap: Calling submodule eap_peap to process data (41) eap_peap: Continuing EAP-TLS (41) eap_peap: [eaptls verify] = ok (41) eap_peap: Done initial handshake (41) eap_peap: [eaptls process] = ok (41) eap_peap: Session established. Decoding tunneled attributes (41) eap_peap: PEAP state send tlv failure (41) eap_peap: Received EAP-TLV response (41) eap_peap: ERROR: The users session was previously rejected: returning reject (again.) (41) eap_peap: This means you need to read the PREVIOUS messages in the debug output (41) eap_peap: to find out the reason why the user was rejected (41) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (41) eap_peap: what went wrong, and how to fix the problem (41) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (41) eap: Sending EAP Failure (code 4) ID 9 length 4 (41) eap: Failed in EAP select (41) [eap] = invalid (41) } # authenticate = invalid (41) Failed to authenticate the user (41) Using Post-Auth-Type Reject (41) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (41) Post-Auth-Type REJECT { (41) attr_filter.access_reject: EXPAND %{User-Name} (41) attr_filter.access_reject: --> joe.doe (41) attr_filter.access_reject: Matched entry DEFAULT at line 11 (41) [attr_filter.access_reject] = updated (41) [eap] = noop (41) policy remove_reply_message_if_eap { (41) if (&reply:EAP-Message && &reply:Reply-Message) { (41) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (41) else { (41) [noop] = noop (41) } # else = noop (41) } # policy remove_reply_message_if_eap = noop (41) } # Post-Auth-Type REJECT = updated (41) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (41) Sending delayed response (41) Sent Access-Reject Id 249 from 10.222.34.11:1812 to 172.16.100.10:65092 length 44 (41) EAP-Message = 0x04090004 (41) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. Can anyone shed some light on this and point me in the right direction what else should I do? All the examples I am able to find on the internet are using AD/samba as database for freeradius which is not the case here.

2 2

AD-integration working well - questions about risk/exposure and related mechanisms
by Dag B 16 Jan '23

16 Jan '23

So, after some fiddling, I can now authenticate users of our network gear (network admins) with AD, via freeradius. Thank you to any and all who have made that possible. It is truly appreciated. Arriving here, I just wanted to ask if there is any document discussing any additional risk or exposure for the AD-accounts by doing this. Note: I am not trying to imply there is one, nor am I trying to sell five feathers as whole chicken in a bag or however that analogy goes. I am merely acknowledging my relative ignorance w.r.t. how AD and RADIUS works and what security mechanisms it has in place for preventing abuse. From the top of my head: - Can someone use freeradius for unlimited tries at guessing an AD password? - If the radius secret becomes known to a bad actor, could they set up a 'farm' of radius clients in the defined client address spaces to bypass rate limits? - And likewise, could they instrument their radius client to reveal more information than we intend to? - Is there a better way to define clients than defining static hosts or networks in clients.conf? (We have an IPAM with an API. Could we employ this to only permit radius requests from known (expected) radius clients?) And I am certain there are more questions I should be asking. Conscious Incompetence and all that jazz.... Thanks, Dag B

2 1

migrating client from 2.0 to 3.0
by Matt Zagrabelny 13 Jan '23

13 Jan '23

Greetings FR-users, I am attempting to fold the functionality of a 2.0 FR system into an existing 3.0 system. I've configured the 2.0 system to proxy to the 3.0 system and this works - call this scenario A: UPS (client) | v FR 2.0 | v FR 3.0 works!! However if I attempt to auth directly from the UPS to the 3.0 system, it does not work - call this scenario B: UPS (client) | v FR 3.0 no works. :( Here are the debug logs for scenario A (working): 2.0 system: rad_recv: Access-Request packet from host 100.73.8.85 port 44482, id=41, length=113 User-Name = "foo" User-Password = "__REDACTED_BUT_VERIFIED_CORRECT_CLEARTEXT__" NAS-IP-Address = 100.73.8.85 NAS-Identifier = "apcE89163.d.umn.edu" NAS-Port = 0 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "foo", looking up realm NULL [suffix] Found realm "NULL" [suffix] Adding Stripped-User-Name = "foo" [suffix] Adding Realm = "NULL" [suffix] Proxying request from user foo to realm NULL [suffix] Preparing to proxy authentication request to realm "NULL" ++[suffix] returns updated [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 230 to 10.212.109.12 port 1812 User-Name = "foo" User-Password = "__REDACTED_BUT_VERIFIED_CORRECT_CLEARTEXT__" NAS-IP-Address = 100.73.8.85 NAS-Identifier = "apcE89163.d.umn.edu" NAS-Port = 0 Proxy-State = 0x3431 Proxying request 0 to home server 10.212.109.12 port 1812 Sending Access-Request of id 230 to 10.212.109.12 port 1812 User-Name = "foo" User-Password = "__REDACTED_BUT_VERIFIED_CORRECT_CLEARTEXT__" NAS-IP-Address = 100.73.8.85 NAS-Identifier = "apcE89163.d.umn.edu" NAS-Port = 0 Proxy-State = 0x3431 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Accept packet from host 10.212.109.12 port 1812, id=230, length=30 Proxy-State = 0x3431 Service-Type = Administrative-User # Executing section post-proxy from file /etc/freeradius/sites-enabled/default +- entering group post-proxy {...} [eap] No pre-existing handler found ++[eap] returns noop Found Auth-Type = Accept Auth-Type = Accept, accepting the user Login OK: [foo] (from client apc-UPS-network-1 port 0) # Executing section post-auth from file /etc/freeradius/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 41 to 100.73.8.85 port 44482 Service-Type = Administrative-User Finished request 0. Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 41 with timestamp +10 3.0 system: (0) Received Access-Request Id 230 from 10.212.109.94:1814 to 10.212.109.12:1812 length 117 (0) User-Name = "foo" (0) User-Password = "__REDACTED_BUT_VERIFIED_CORRECT_CLEARTEXT__" (0) NAS-IP-Address = 100.73.8.85 (0) NAS-Identifier = "apcE89163.d.umn.edu" (0) NAS-Port = 0 (0) Proxy-State = 0x3431 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "foo", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop (0) [expiration] = noop (0) [logintime] = noop (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) if ("%{client:group}" == 'two-factor-authentication-group') { (0) EXPAND %{client:group} (0) --> default-authentication-group (0) if ("%{client:group}" == 'two-factor-authentication-group') -> FALSE (0) else { (0) update control { (0) Proxy-To-Realm := 'default-authentication-realm' (0) } # update control = noop (0) } # else = noop (0) } # authorize = ok (0) Starting proxy to home server 10.84.192.196 port 1812 (0) server default { (0) } (0) Proxying request to home server 10.84.192.196 port 1812 timeout 60.000000 (0) Sent Access-Request Id 13 from 0.0.0.0:42276 to 10.84.192.196:1812 length 146 (0) User-Name = "foo" (0) User-Password = "__REDACTED_BUT_VERIFIED_CORRECT_CLEARTEXT__" (0) NAS-IP-Address = 100.73.8.85 (0) NAS-Identifier = "apcE89163.d.umn.edu" (0) NAS-Port = 0 (0) Proxy-State = 0x3431 (0) Event-Timestamp = "Jan 12 2023 16:33:29 CST" (0) Message-Authenticator := 0x00 (0) Proxy-State = 0x323330 Waking up in 0.3 seconds. (0) Marking home server 10.84.192.196 port 1812 alive (0) Clearing existing &reply: attributes (0) Received Access-Accept Id 13 from 10.84.192.196:1812 to 10.212.109.12:42276 length 29 (0) Proxy-State = 0x3431 (0) Proxy-State = 0x323330 (0) server default { (0) # Executing section post-proxy from file /etc/freeradius/3.0/sites-enabled/default (0) post-proxy { (0) eap: No pre-existing handler found (0) [eap] = noop (0) } # post-proxy = noop (0) } (0) Found Auth-Type = Accept (0) Auth-Type = Accept, accepting the user (0) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (0) post-auth { (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (0) update { (0) No attributes updated for RHS &session-state: (0) } # update = noop (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) update reply { (0) Service-Type = Administrative-User (0) } # update reply = noop (0) } # post-auth = noop (0) Login OK: [foo] (from client radius-netgear.d.umn.edu_10.212.109.94 port 0) (0) Sent Access-Accept Id 230 from 10.212.109.12:1812 to 10.212.109.94:1814 length 0 (0) Proxy-State = 0x3431 (0) Service-Type = Administrative-User (0) Finished request and the scenario B (not working) debug: (0) Received Access-Request Id 45 from 100.73.8.85:55435 to 10.212.109.12:1812 length 113 (0) User-Name = "foo" (0) User-Password = "__REDACTED_BUT_VERIFIED_CORRECT_CLEARTEXT__" (0) NAS-IP-Address = 100.73.8.85 (0) NAS-Identifier = "apcE89163.d.umn.edu" (0) NAS-Port = 0 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "foo", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop (0) [expiration] = noop (0) [logintime] = noop (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) if ("%{client:group}" == 'two-factor-authentication-group') { (0) EXPAND %{client:group} (0) --> (0) if ("%{client:group}" == 'two-factor-authentication-group') -> FALSE (0) else { (0) update control { (0) Proxy-To-Realm := 'default-authentication-realm' (0) } # update control = noop (0) } # else = noop (0) } # authorize = ok (0) Starting proxy to home server 10.84.192.196 port 1812 (0) server default { (0) } (0) Proxying request to home server 10.84.192.196 port 1812 timeout 60.000000 (0) Sent Access-Request Id 206 from 0.0.0.0:57643 to 10.84.192.196:1812 length 141 (0) User-Name = "foo" (0) User-Password = "__REDACTED_BUT_VERIFIED_CORRECT_CLEARTEXT__" (0) NAS-IP-Address = 100.73.8.85 (0) NAS-Identifier = "apcE89163.d.umn.edu" (0) NAS-Port = 0 (0) Event-Timestamp = "Jan 12 2023 16:36:29 CST" (0) Message-Authenticator := 0x00 (0) Proxy-State = 0x3435 Waking up in 0.3 seconds. (0) Marking home server 10.84.192.196 port 1812 alive (0) Clearing existing &reply: attributes (0) Received Access-Accept Id 206 from 10.84.192.196:1812 to 10.212.109.12:57643 length 24 (0) Proxy-State = 0x3435 (0) server default { (0) # Executing section post-proxy from file /etc/freeradius/3.0/sites-enabled/default (0) post-proxy { (0) eap: No pre-existing handler found (0) [eap] = noop (0) } # post-proxy = noop (0) } (0) Found Auth-Type = Accept (0) Auth-Type = Accept, accepting the user (0) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (0) post-auth { (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (0) update { (0) No attributes updated for RHS &session-state: (0) } # update = noop (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) update reply { (0) Service-Type = Administrative-User (0) } # update reply = noop (0) } # post-auth = noop (0) Login OK: [foo] (from client 100.73.8.0/23_100.73.8.0/23 port 0) (0) Sent Access-Accept Id 45 from 10.212.109.12:1812 to 100.73.8.85:55435 length 0 (0) Service-Type = Administrative-User (0) Finished request Both scenarios send Access-Accept and the Service-Type back to the client. I'm not sure if there is more to look at between the 2.0 and 3.0 systems. It is difficult to do any debugging on the UPS, so I was hoping to figure out the issue on the FR systems. I've performed a diff of the scenario A and B 3.0 debug outputs and I don't see anything significant in the difference. I have removed the Service-Type from the configurations and I still get a success authentication, I am just entered into a non-administrative role on the UPS. Does anyone have any ideas for further debugging? Thanks for any pointers or help! -m

3 5

Need to keep restarting FreeRadius service
by Kristian Maiorano 12 Jan '23

12 Jan '23

I have setup my Unifi network to connect to a Raspberry Pi 2 hosting FreeRadius 3.2.0 with MAC authentication. That all seems to work now, however I've run into an issue where it seems the FreeRadius service needs to be restarted fairly frequently, at least multiple times a day. From what I can tell, the Pi is fine and there's plenty of storage and resources. Restarting the service allows anything that was having issues to connect, such as if it's been disconnected for a bit (e.g., my phone when I go out and come back) but even devices that don't leave the house and stay on sometimes lose connection until a service restart. I know I could probably setup a cron job that restarts the service every 30 minutes or so, but I wanted to check if people had ideas on how to fix it. Here's my freeradius -X output with one example of a device connecting successfully. FreeRADIUS Version 3.2.0 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/digest including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/filter including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } recv_coa { } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client unifi { ipaddr = 24.34.239.95 require_message_authenticator = no secret = <<< secret >>> shortname = "dmwan" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client unifi { ipaddr = 192.168.1.1 require_message_authenticator = no secret = <<< secret >>> shortname = "dmlan" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client unifi_1_ap { ipaddr = 192.168.1.46 require_message_authenticator = no secret = <<< secret >>> shortname = "1ap" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client unifi_2_ap { ipaddr = 192.168.1.230 require_message_authenticator = no secret = <<< secret >>> shortname = "2ap" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/3.0/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "tls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest instantiate { } # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/coa # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:336 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 56081 Listening on proxy address :: port 34301 Ready to process requests (0) Received Access-Request Id 71 from 192.168.1.1:47441 to 192.168.1.25:1812 length 187 (0) User-Name = "58:24:29:57:e1:f1" (0) User-Password = "58:24:29:57:e1:f1" (0) NAS-IP-Address = 192.168.1.1 (0) NAS-Identifier = "68d79a41138e" (0) Called-Station-Id = "68-D7-9A-41-13-8E:Chomper" (0) NAS-Port-Type = Wireless-802.11 (0) Calling-Station-Id = "58-24-29-57-E1-F1" (0) Connect-Info = "CONNECT 11Mbps 802.11b" (0) Message-Authenticator = 0x4fedc4ffc0daa97f3ae1029e31881b94 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) policy rewrite_calling_station_id { (0) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (0) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (0) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (0) update request { (0) EXPAND %{tolower:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (0) --> 58-24-29-57-e1-f1 (0) &Calling-Station-Id := 58-24-29-57-e1-f1 (0) } # update request = noop (0) [updated] = updated (0) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (0) ... skipping else: Preceding "if" was taken (0) } # policy rewrite_calling_station_id = updated (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "58:24:29:57:e1:f1", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) files: users: Matched entry 58:24:29:57:e1:f1 at line 68 (0) [files] = ok (0) [expiration] = noop (0) [logintime] = noop (0) [pap] = updated (0) } # authorize = updated (0) Found Auth-Type = PAP (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Auth-Type PAP { (0) pap: Login attempt with password (0) pap: Comparing with "known good" Cleartext-Password (0) pap: User authenticated successfully (0) [pap] = ok (0) } # Auth-Type PAP = ok (0) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (0) post-auth { (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (0) update { (0) No attributes updated for RHS &session-state: (0) } # update = noop (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) if (EAP-Key-Name && &reply:EAP-Session-Id) { (0) if (EAP-Key-Name && &reply:EAP-Session-Id) -> FALSE (0) } # post-auth = noop (0) Sent Access-Accept Id 71 from 192.168.1.25:1812 to 192.168.1.1:47441 length 35 (0) Tunnel-Type = VLAN (0) Tunnel-Medium-Type = IEEE-802 (0) Tunnel-Private-Group-Id = "1" (0) Finished request Waking up in 4.9 seconds. (1) Received Accounting-Request Id 72 from 192.168.1.1:58228 to 192.168.1.25:1813 length 206 (1) Acct-Status-Type = Start (1) Acct-Authentic = Local (1) User-Name = "58:24:29:57:e1:f1" (1) NAS-IP-Address = 192.168.1.1 (1) Framed-IP-Address = 192.168.1.209 (1) NAS-Identifier = "68d79a41138e" (1) Called-Station-Id = "68-D7-9A-41-13-8E:Chomper" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Calling-Station-Id = "58-24-29-57-E1-F1" (1) Connect-Info = "CONNECT 0Mbps 802.11a" (1) Acct-Session-Id = "5DFBEAF391253B0C" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027074 (1) Event-Timestamp = "Jan 12 2023 14:36:24 EST" (1) Acct-Delay-Time = 0 (1) # Executing section preacct from file /etc/freeradius/3.0/sites-enabled/default (1) preacct { (1) [preprocess] = ok (1) policy acct_unique { (1) update request { (1) &Tmp-String-9 := "ai:" (1) } # update request = noop (1) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (1) EXPAND %{hex:&Class} (1) --> (1) EXPAND ^%{hex:&Tmp-String-9} (1) --> ^61693a (1) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (1) else { (1) update request { (1) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (1) --> 8ad2d8c86863f64eeaaea4c131b46e1f (1) &Acct-Unique-Session-Id := 8ad2d8c86863f64eeaaea4c131b46e1f (1) } # update request = noop (1) } # else = noop (1) update request { (1) &Tmp-String-9 !* ANY (1) } # update request = noop (1) } # policy acct_unique = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "58:24:29:57:e1:f1", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) [files] = noop (1) } # preacct = ok (1) # Executing section accounting from file /etc/freeradius/3.0/sites-enabled/default (1) accounting { (1) detail: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d (1) detail: --> /var/log/freeradius/radacct/192.168.1.1/detail-20230112 (1) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.1.1/detail-20230112 (1) detail: EXPAND %t (1) detail: --> Thu Jan 12 14:36:24 2023 (1) [detail] = ok (1) [unix] = ok (1) [exec] = noop (1) attr_filter.accounting_response: EXPAND %{User-Name} (1) attr_filter.accounting_response: --> 58:24:29:57:e1:f1 (1) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (1) [attr_filter.accounting_response] = updated (1) } # accounting = updated (1) Sent Accounting-Response Id 72 from 192.168.1.25:1813 to 192.168.1.1:58228 length 20 (1) Finished request (1) Cleaning up request packet ID 72 with timestamp +8 due to done

2 2