March 2025 - Freeradius-Users - lists.freeradius.org

mschap: Strange behaviour in two differend servers.
by Michael Schwartzkopff 06 Mar '25

06 Mar '25

Hi, we have a strange behaviour in our FreeRADIUS setup. the mschap module in one server authenticates the users and in the other server rejects him. Any ideas from you? Working server: (543) Thu Feb 20 15:49:18 2025: Debug: eap: Peer sent packet with method EAP MSCHAPv2 (26) (543) Thu Feb 20 15:49:18 2025: Debug: eap: Calling submodule eap_mschapv2 to process data (543) Thu Feb 20 15:49:18 2025: Debug: eap: Sending EAP Success (code 3) ID 108 length 4 (543) Thu Feb 20 15:49:18 2025: Debug: eap: Freeing handler (543) Thu Feb 20 15:49:18 2025: Debug: modsingle[authenticate]: returned from eap (rlm_eap) (543) Thu Feb 20 15:49:18 2025: Debug: [eap] = ok (543) Thu Feb 20 15:49:18 2025: Debug: } # authenticate = ok Failed request: (4) Fri Feb 21 13:28:09 2025: Debug: eap: Peer sent packet with method EAP MSCHAPv2 (26) (4) Fri Feb 21 13:28:09 2025: Debug: eap: Calling submodule eap_mschapv2 to process data (4) Fri Feb 21 13:28:09 2025: Debug: eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/vpn-ip (4) Fri Feb 21 13:28:09 2025: Debug: eap_mschapv2: authenticate { (4) Fri Feb 21 13:28:09 2025: Debug: eap_mschapv2: modsingle[authenticate]: calling mschap (rlm_mschap) (4) Fri Feb 21 13:28:09 2025: Debug: mschap: Found NT-Password (4) Fri Feb 21 13:28:09 2025: Debug: mschap: Creating challenge hash with username: bad_user (4) Fri Feb 21 13:28:09 2025: Debug: mschap: Client is using MS-CHAPv2 (4) Fri Feb 21 13:28:09 2025: Debug: mschap: EXPAND TMPL XLAT (4) Fri Feb 21 13:28:09 2025: Debug: mschap: EXPAND %{mschap:User-Name} (4) Fri Feb 21 13:28:09 2025: Debug: mschap: --> bad_user (4) Fri Feb 21 13:28:09 2025: Debug: mschap: EXPAND TMPL LITERAL (4) Fri Feb 21 13:28:09 2025: Debug: mschap: sending authentication request user='bad_user' domain='DOMAIN' (4) Fri Feb 21 13:28:09 2025: ERROR: mschap: When trying to update a password, this return status indicates that the value provided as the current password is not correct. [0xC000006A] (4) Fri Feb 21 13:28:09 2025: ERROR: mschap: MS-CHAP2-Response is incorrect (4) Fri Feb 21 13:28:09 2025: Debug: eap_mschapv2: modsingle[authenticate]: returned from mschap (rlm_mschap) (4) Fri Feb 21 13:28:09 2025: Debug: eap_mschapv2: [mschap] = reject (4) Fri Feb 21 13:28:09 2025: Debug: eap_mschapv2: } # authenticate = reject (4) Fri Feb 21 13:28:09 2025: Debug: eap_mschapv2: MSCHAP-Error: E=691 R=1 C=XXXX V=3 M=Authentication rejected (4) Fri Feb 21 13:28:09 2025: Debug: eap_mschapv2: Found new challenge from MS-CHAP-Error: err=691 retry=1 challenge=XXXX (4) Fri Feb 21 13:28:09 2025: ERROR: eap_mschapv2: MSCHAP Failure

1 0

LDAP-defined huntrgroups: docs, pointers, anything?
by Jostein Fossheim 06 Mar '25

06 Mar '25

Hello all We are working on a setup with freeradius using freeipa's ldap-server as a backend for freeradius. I have successufully expanded det LDAP-schema with radius-attributes, etc. Users, usergroups and clients (IPs and secrets) can be defined via ldap. I am hoping to be able to define huntgroups as well, but I have not found any detailed information on how to procceed. There is this howto for SQL-based backends, and random searches and LLM-queries don't get me any further: https://wiki.freeradius.org/guide/SQL-Huntgroup-HOWTO I am not certain if this really is a question for the user list or the devel list, but I can try both. More details: I was hoping to use a standard memberOf in my client-definition. CLIENT: dn: fqdn=[NAS-NAME].[base_domain],cn=computers,cn=accounts,[base_dn] objectClass: ieee802Device objectClass: ipaHost objectClass: ipaObject objectClass: ipaService objectClass: ipaSshGroupOfPubKeys objectClass: ipaSshHost objectClass: krbPrincipal objectClass: krbPrincipalAux objectClass: nsHost objectClass: pkiUser objectClass: radiusClient objectClass: radiusProfile objectClass: top cn: [FQDN] fqdn: [FQDN] memberOf: cn=radius_huntgroup,cn=hostgroups,cn=accounts,[base_dn] radiusClientSecret: Testing321 radiusClientIPAddress: 192.168.0.80 serverHostName: [NAS-NAME] "HOST/HUNTGROUP": dn: cn=radius_huntgroup,cn=hostgroups,cn=accounts,[base_dn] objectClass: groupOfNames objectClass: ipahostgroup objectClass: ipaobject objectClass: mepOriginEntry objectClass: nestedGroup objectClass: top cn: radius_huntgroup member: fqdn=[NAS-NAME].[base_domain],cn=computers,cn=accounts,[base_dn] So basically I want one huntgroup entry, for every group defined inn: cn=hostgroups,cn=accounts,[base_dn] With NASes defined in: cn=computers,cn=accounts,[base_dn] And their relevant IP addresses: radiusClientIPAddress: 192.168.0.80 There are some very old posts, in the mailinglist discussing similar topics, but I am not found anything usefull there neither. -- Best Regards Jostein Fossheim

2 14

Re: LDAP-defined huntrgroups: docs, pointers, anything?
by Jostein Fossheim 05 Mar '25

05 Mar '25

One follow up question, I had originally a plan to define radiusAttributes that are mapped to dictionary-attributes on (user)group-objects in ldap, but I abandoned the idea. But with direct ldap-queries via unlang this should be achievable as well, shouldn’t it? For instance a radiusVlanID- or a radiuswifiAccess-attribute, and do a checks on all groups which a user belongs for such attributes. If some are set, then map them to the corresponding dictionary values in the reply. -- Jostein Fossheim > On 5 Mar 2025, at 14:56, Alan DeKok <aland(a)deployingradius.com> wrote: > >> On Mar 5, 2025, at 8:19 AM, Jostein Fossheim via Freeradius-Users <freeradius-users(a)lists.freeradius.org> wrote: >> So what you are saying is that I can do ldap-queries directly in unlang, > > Yes. > >> this the best refference/doc I have: https://www.freeradius.org/radiusd/man/unlang.html https://www.freeradius.org/documentation/freeradius-server/3.2.8/unlang/ind… Do you (or anyone) know of any examples that I can use, to master those queries quicker? I find some vague hints in the ldap-module section: > > You can do LDAP queries in v3 with the syntax: %{ldap:...} Just replace the "..." with the LDAP query. > >> https://www.freeradius.org/documentation/freeradius-server/4.0~alpha1/raddb… I assume that I can follow the same logic as in the SQL-howto from my original post (above)? > > Don't follow the v4 docs for v3, but yes. Just write "unlang" policies to check things in LDAP, and make decisions based on the result. > >> - Locate the |authorize { }| section in your radiusd.conf or sites-enabled/defaut configuration. >> - After the preprocess module insert the following update request { Huntgroup-Name := "%{sql:SELECT |groupname| FROM |radhuntgroup| WHERE nasipaddress='%{NAS-IP-Address}'}" } >> >> And the basic logic of my query should be: >> >> 1. Query for all huntgroups in the tree containing hostgroups: >> >> cn=computers,cn=accounts,[base_dn] >> >> 2. Do a second query for each member defined in the group (freeipa uses both member and memberOf), to check if any of the members (hosts/NASes) have radiusClientIPAddress= %{NAS-IP-Address} defined, if yes, the connecting NAS is a member of one or more huntrgroups? > > You should be able to combine both of those searches into one LDAP query. > > Test the queries with the command-line ldapsearch tool. Then, take the queries, add some dynamic expansions, and add them to FreeRADIUS. That's the easiest way to test. > >> I will report back if I am sucessfull. >> >> We also did some work so that we could import the radius-schema directly into freeIPA, if this would be interesting for anyone, we could share the results as well. > > That would be good, thanks. > > Alan DeKok.

2 1

RADSEC keep TLS connections open with keep-alive
by Michal Moravec 04 Mar '25

04 Mar '25

Hi there, Is it possible to configure FreeRADIUS server not to close TCP/TLS RADSEC connection between NAS and RADIUS server after completing a single request? Some network vendors support sending keep-alive messages through the connection in order to keep it established and re-use it for subsequent requests. I think a possible alternate solution would be to put a load balancer in front of the RADIUS server which would handle the persistent connection. Best, Michal Moravec

3 6

Status of v4
by Alan DeKok 03 Mar '25

03 Mar '25

While there have been many rumours of v4 and promises of releases, it's likely time for a realistic summary of what's going on. v4 has take a long time in part because we want to do it "right", and in part because the development model has changed substantially since 3.0.0 was released. Prior to v4, FreeRADIUS was largely a part-time effort for the people involved. Everyone had day jobs, and pushed the server forward a little bit, based on available time. The result was something which worked, but which definitely had some rough edges. Since the release of 3.0.0, FreeRADIUS has become a full-time job for the core developers. This means that while there is significantly more work done on FreeRADIUS than before, the new releases have slowed down substantially. Why? There are two reasons. The first reason is that people like to eat. Customer projects take time away from FreeRADIUS, but also pay the bills. The second reason is that we now have the resources to re-architect the server to be everything we've wanted it to be. And rearchitecture takes time. The good news is that v4 is stable, and is running in multiple ISP environments. NDAs etc. prevent naming names, but be assured that it's running on many sites with millions of users. Another piece of good news is that the list of "TODOs" for v4 is growing much shorter. The current list of features in v3 which are missing in v4 is: * statistics, so that people can monitor server behaviour * RADIUS/TLS or RadSec. That's pretty much it. And I think even RADIUS/TLS could be dropped from an initial 4.0, and added to a later release. We could call 4.0 an "ISP" version, and then add RADIUS/TLS later, to ensure that the eduroam people are happy with it. There are also lower priority features in v3 which aren't in v4: * EAP-FAST * EAP-TEAP * changes to the DPSK module We're OK with adding those later, as they are lower priority. So what took us so long? We ended up essentially re-doing everything from scratch. This is known as the "second system syndrome". But I think the results are worth it. While the configuration is still recognizably FreeRADIUS, the outcome is enormously better than v3. All of the weird / confusing issues have been cleared up. The documentation is obsessively complete (and we have a full-time person working on it). There are hundreds of unit tests / regression tests. It's automatically run under multiple static analyzers and fuzzers. The list of new features in v4 is large: * DNS, DHCPv4, DHCPv6, and even LDAP sync are now core protocols, and are fully supported. All in the same binary at the same time. We're adding support for more, too. (Native DER decoding!) * the server is fully asynchronous, so blocking databases are much less of a problem. Observed throughput is noticeably higher * unlang has been updated with many new keywords and functionality. You can now do expressions in-place. The "update" section is no longer needed, so configurations get simpler and clearer. The function syntax finally makes sense, and looks a lot better * and many, many, more. At this point, if we're willing to drop RADIUS/TLS from a v4 release, the only blocking issue is statistics. And there's no reason why we can't have that done by June. Comments? Feedback? Alan DeKok.

4 6

TLS Session Resumption with Proxy in Inner-Tunnel Not Working
by MERLE Pierrick (Chef de projet réseau) - SG/DNU M/MSP/DIS/GIR 03 Mar '25

03 Mar '25

Hello FreeRADIUS community, I am currently using FreeRADIUS 3.2.x as a RADIUS proxy to forward EAP-PEAP/MSCHAPv2 authentication requests to a backend Microsoft NPS server. The setup is working correctly, but I am facing an issue with TLS session resumption when using a proxy in the inner-tunnel: Attributes are never saved in the tls cache. When I use this setup without any proxy at all, TLS session resumption just works as expected. Is TLS session resumption supported when using FreeRADIUS as a proxy for the inner authentication? If so, how can I properly cache the TLS session in this scenario? Any guidance would be greatly appreciated. Thank you for your help! Best regards, Pierrick

2 2

LDAP and RFC2868 tagged attributes for Tunnel
by Ron Grant 01 Mar '25

01 Mar '25

I would like to know if anyone has encountered (and solved!) this before. I am trying to use LDAP Tunnel attributes to establish PPP over L2TP tunnels from a provider's LAC to our LNS. This has been working for many years now using freeradius 2.2.6 using the following syntax in /etc/raddb/ldap.attrmap: replyItem Tunnel-Type radiusTunnelType += replyItem Tunnel-Medium-Type radiusTunnelMediumType += replyItem Tunnel-Private-Group-Id radiusTunnelPrivateGroupId += replyItem Tunnel-Server-Endpoint radiusTunnelServerEndpoint += replyItem Tunnel-Password radiusTunnelPassword += replyItem Tunnel-Preference radiusTunnelPreference += and the LDAP attributes as follows: radiustunnelmediumtype: :0:IP radiustunnelmediumtype: :1:IP radiustunnelmediumtype: :2:IP radiustunnelmediumtype: :3:IP radiustunnelpassword: :0:providersecret radiustunnelpassword: :1:providersecret radiustunnelpassword: :2:providersecret radiustunnelpassword: :3:providersecret radiustunnelpreference: :0:1 radiustunnelpreference: :1:1 radiustunnelpreference: :2:1 radiustunnelpreference: :3:1 radiustunnelserverendpoint: :0:AA.BB.20.106 radiustunnelserverendpoint: :1:AA.BB.20.114 radiustunnelserverendpoint: :2:CC.DD.80.26 radiustunnelserverendpoint: :3:CC.DD.80.74 radiustunneltype: :0:L2TP radiustunneltype: :1:L2TP radiustunneltype: :2:L2TP radiustunneltype: :3:L2TP resulting in output like this: rad_recv: Access-Accept packet from host XX.YY.186.11 port 1812, id=240, length=547 Tunnel-Preference:0 = 1 Tunnel-Preference:1 = 1 Tunnel-Preference:2 = 1 Tunnel-Preference:3 = 1 Tunnel-Password:0 = "providersecret" Tunnel-Password:1 = "providersecret" Tunnel-Password:2 = "providersecret" Tunnel-Password:3 = "providersecret" Tunnel-Server-Endpoint:0 = "AA.BB.20.106" Tunnel-Server-Endpoint:1 = "AA.BB.20.114" Tunnel-Server-Endpoint:2 = "CC.DD.80.26" Tunnel-Server-Endpoint:3 = "CC.DD.80.74" Tunnel-Medium-Type:0 = IPv4 Tunnel-Medium-Type:1 = IPv4 Tunnel-Medium-Type:2 = IPv4 Tunnel-Medium-Type:3 = IPv4 Tunnel-Type:0 = L2TP Tunnel-Type:1 = L2TP Tunnel-Type:2 = L2TP Tunnel-Type:3 = L2TP However when upgrading these servers to a modern distro (ubuntu 24.04), and to freeradius 3.2.5, and adding the following lines to the "update" section of the ldap module: reply:Tunnel-Type += 'radiusTunnelType' reply:Tunnel-Medium-Type += 'radiusTunnelMediumType' reply:Tunnel-Server-Endpoint += 'radiusTunnelServerEndpoint' reply:Tunnel-Password += 'radiusTunnelPassword' reply:Tunnel-Preference += 'radiusTunnelPreference' I get the following reply: Tunnel-Server-Endpoint:0 = ":0:AA.BB.20.106" Tunnel-Server-Endpoint:0 = ":1:AA.BB.20.114" Tunnel-Server-Endpoint:0 = ":2:CC.DD.80.26" Tunnel-Server-Endpoint:0 = ":3:CC.DD.80.74" Tunnel-Password:0 = ":0:providersecret" Tunnel-Password:0 = ":1:providersecret" Tunnel-Password:0 = ":2:providersecret" Tunnel-Password:0 = ":3:providersecret" which is obviously not right - it does not seem to be recognizing the attributes as ones that need to have a tag pulled out - though curiously it does remove the colons. Debug follows, but obviously what I am trying to do is tell freeradius 3.2.5 that these attributes "has_tag".....it obviously knows they SHOULD have a tag but it's not picking them up. FreeRADIUS Version 3.2.5 Copyright (C) 1999-2023 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/clients.conf including configuration file /etc/freeradius/3.0/mods-enabled/sql including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/sqlippool including configuration file /etc/freeradius/3.0/mods-config/sql/ippool/mysql/queries.conf including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/always including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/eap including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 proxy_dedup_window = 1 cleanup_delay = 5 max_requests = 16384 max_fds = 512 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = yes colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes require_message_authenticator = "auto" limit_proxy_state = "auto" } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } } client radius2 { ipaddr = 172.XX.2.12 require_message_authenticator = "true" secret = <<< secret >>> limit { max_connections = 100 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = LDAP # Creating Auth-Type = digest # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql sql { driver = "rlm_sql_null" server = "dbhost" port = 3306 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct a LEFT OUTER JOIN nasreload n USING (nasipaddress) WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL AND (a.acctstarttime > n.reloadtime OR n.reloadtime IS NULL)" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct a LEFT OUTER JOIN nasreload n USING (nasipaddress) WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL AND (a.acctstarttime > n.reloadtime OR n.reloadtime IS NULL)" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" auto_escape = no accounting { reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, framedipv6address, framedipv6prefix, framedinterfaceid, delegatedipv6prefix ) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}', '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}', '%{Delegated-IPv6-Prefix}' )" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctinterval = %{%{integer:Event-Timestamp}:-%l} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', framedipv6address = '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}', framedinterfaceid = '%{Framed-Interface-Id}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate ) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S.%M' )" } } rlm_sql (sql): Driver rlm_sql_null (module rlm_sql_null) loaded and linked Creating attribute SQL-Group # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/3.0/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "localhost" identity = "cn=radiusmanager,dc=redacteddomain,dc=com" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=redacteddomain,dc=com" } profile { attribute = "radiusProfileDn" } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { cipher_list = "DEFAULT" check_crl = no start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_sqlippool # Loading module "sqlippool" from file /etc/freeradius/3.0/mods-enabled/sqlippool sqlippool { sql_module_instance = "sql" lease_duration = 86400 pool_name = "Pool-Name" attribute_name = "Framed-IP-Address" req_attribute_name = "Framed-IP-Address" allocate_begin = "START TRANSACTION" allocate_clear = "" allocate_clear_timeout = 1 allocate_existing = "SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port}' ORDER BY expiry_time DESC LIMIT 1 FOR UPDATE " allocate_requested = "" allocate_find = "SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND expiry_time < NOW() ORDER BY expiry_time LIMIT 1 FOR UPDATE " allocate_update = "UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = NOW() + INTERVAL 86400 SECOND WHERE framedipaddress = '%I'" allocate_commit = "COMMIT" pool_check = "SELECT id FROM radippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1" start_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL 86400 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" alive_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL 86400 SECOND WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" stop_clear = "UPDATE radippool SET expiry_time = NOW() WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" on_clear = "UPDATE radippool SET expiry_time = NOW() WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'" off_clear = "UPDATE radippool SET expiry_time = NOW() WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'" messages { exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" clear = "Released IP %{request:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})" failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" } } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 max_eap_type = 52 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 dedup_key = "" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } instantiate { } # Instantiating module "sql" from file /etc/freeradius/3.0/mods-enabled/sql rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 max_retries = 5 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/coa # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20607 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! libldap is using GnuTLS, while FreeRADIUS is using OpenSSL !! There may be random issues with TLS connections due to this conflict. !! The server may also crash. !! See https://wiki.freeradius.org/modules/Rlm_ldap for more information. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 max_retries = 5 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "sqlippool" from file /etc/freeradius/3.0/mods-enabled/sqlippool # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:366 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Ready to process requests (0) Received Access-Request Id 218 from 172.XX.2.12:53346 to 172.XX.2.11:1812 length 93 (0) Message-Authenticator = 0x0e0ef84ae5e7e16d5f4da0bedfeb5968 (0) User-Name = "testprog2(a)redacteddomain.com" (0) User-Password = "seekrit" (0) NAS-IP-Address = 172.XX.2.12 (0) NAS-Port = 0 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (0) auth_log: --> /var/log/freeradius/radacct/172.XX.2.12/auth-detail-20250224 (0) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/172.XX.2.12/auth-detail-20250224 (0) auth_log: EXPAND %t (0) auth_log: --> Mon Feb 24 16:59:22 2025 (0) [auth_log] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "redacteddomain.com" for User-Name = "testprog2(a)redacteddomain.com" (0) suffix: No such realm "redacteddomain.com" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop rlm_ldap (ldap): Reserved connection (0) (0) ldap: EXPAND (&(objectclass=radiusprofile)(uid=%{%{Stripped-User-Name}:-%{User-Name}})) (0) ldap: --> (&(objectclass=radiusprofile)(uid=testprog2(a)redacteddomain.com)) (0) ldap: Performing search in "dc=redacteddomain,dc=com" with filter "(&(objectclass=radiusprofile)(uid=testprog2(a)redacteddomain.com))", scope "sub" (0) ldap: Waiting for search result... (0) ldap: User object found at DN "cn=testprog2(a)redacteddomain.com,ou=people,dc=redacteddomain,dc=com" (0) ldap: Performing search in "cn=BalancedPublic,ou=profiles,dc=redacteddomain,dc=com" with filter "(objectclass=radiusprofile)", scope "base" (0) ldap: Waiting for search result... (0) ldap: Processing profile attributes (0) ldap: control:Simultaneous-Use := 1 (0) ldap: reply:Service-Type := Framed-User (0) ldap: reply:Idle-Timeout := 0 (0) ldap: reply:Session-Timeout := 0 (0) ldap: reply:Framed-Protocol := PPP (0) ldap: WARNING: Failed parsing value ":0:L2TP" for attribute Tunnel-Type: Unknown or invalid value ":0:L2TP" for attribute Tunnel-Type (0) ldap: WARNING: Failed parsing value ":1:L2TP" for attribute Tunnel-Type: Unknown or invalid value ":1:L2TP" for attribute Tunnel-Type (0) ldap: WARNING: Failed parsing value ":2:L2TP" for attribute Tunnel-Type: Unknown or invalid value ":2:L2TP" for attribute Tunnel-Type (0) ldap: WARNING: Failed parsing value ":3:L2TP" for attribute Tunnel-Type: Unknown or invalid value ":3:L2TP" for attribute Tunnel-Type (0) ldap: WARNING: Failed parsing value ":4:L2TP" for attribute Tunnel-Type: Unknown or invalid value ":4:L2TP" for attribute Tunnel-Type (0) ldap: WARNING: Failed parsing value ":5:L2TP" for attribute Tunnel-Type: Unknown or invalid value ":5:L2TP" for attribute Tunnel-Type (0) ldap: WARNING: Failed parsing value ":6:L2TP" for attribute Tunnel-Type: Unknown or invalid value ":6:L2TP" for attribute Tunnel-Type (0) ldap: WARNING: Failed parsing value ":7:L2TP" for attribute Tunnel-Type: Unknown or invalid value ":7:L2TP" for attribute Tunnel-Type (0) ldap: No attributes updated for RHS radiusTunnelType (0) ldap: WARNING: Failed parsing value ":0:IP" for attribute Tunnel-Medium-Type: Unknown or invalid value ":0:IP" for attribute Tunnel-Medium-Type (0) ldap: WARNING: Failed parsing value ":1:IP" for attribute Tunnel-Medium-Type: Unknown or invalid value ":1:IP" for attribute Tunnel-Medium-Type (0) ldap: WARNING: Failed parsing value ":2:IP" for attribute Tunnel-Medium-Type: Unknown or invalid value ":2:IP" for attribute Tunnel-Medium-Type (0) ldap: WARNING: Failed parsing value ":3:IP" for attribute Tunnel-Medium-Type: Unknown or invalid value ":3:IP" for attribute Tunnel-Medium-Type (0) ldap: WARNING: Failed parsing value ":4:IP" for attribute Tunnel-Medium-Type: Unknown or invalid value ":4:IP" for attribute Tunnel-Medium-Type (0) ldap: WARNING: Failed parsing value ":5:IP" for attribute Tunnel-Medium-Type: Unknown or invalid value ":5:IP" for attribute Tunnel-Medium-Type (0) ldap: WARNING: Failed parsing value ":6:IP" for attribute Tunnel-Medium-Type: Unknown or invalid value ":6:IP" for attribute Tunnel-Medium-Type (0) ldap: WARNING: Failed parsing value ":7:IP" for attribute Tunnel-Medium-Type: Unknown or invalid value ":7:IP" for attribute Tunnel-Medium-Type (0) ldap: No attributes updated for RHS radiusTunnelMediumType (0) ldap: reply:Tunnel-Server-Endpoint += ':0:AA.BB.20.106' (0) ldap: reply:Tunnel-Server-Endpoint += ':1:AA.BB.20.114' (0) ldap: reply:Tunnel-Server-Endpoint += ':2:CC.DD.80.26' (0) ldap: reply:Tunnel-Server-Endpoint += ':3:CC.DD.80.74' (0) ldap: reply:Tunnel-Server-Endpoint += ':4:AA.BB.20.107' (0) ldap: reply:Tunnel-Server-Endpoint += ':5:AA.BB.20.115' (0) ldap: reply:Tunnel-Server-Endpoint += ':6:CC.DD.80.27' (0) ldap: reply:Tunnel-Server-Endpoint += ':7:CC.DD.80.75' (0) ldap: reply:Tunnel-Password += ':0:providersecret' (0) ldap: reply:Tunnel-Password += ':1:providersecret' (0) ldap: reply:Tunnel-Password += ':2:providersecret' (0) ldap: reply:Tunnel-Password += ':3:providersecret' (0) ldap: reply:Tunnel-Password += ':4:providersecret' (0) ldap: reply:Tunnel-Password += ':5:providersecret' (0) ldap: reply:Tunnel-Password += ':6:providersecret' (0) ldap: reply:Tunnel-Password += ':7:providersecret' (0) ldap: WARNING: Failed parsing value ":0:1" for attribute Tunnel-Preference: Unknown or invalid value ":0:1" for attribute Tunnel-Preference (0) ldap: WARNING: Failed parsing value ":1:1" for attribute Tunnel-Preference: Unknown or invalid value ":1:1" for attribute Tunnel-Preference (0) ldap: WARNING: Failed parsing value ":2:1" for attribute Tunnel-Preference: Unknown or invalid value ":2:1" for attribute Tunnel-Preference (0) ldap: WARNING: Failed parsing value ":3:1" for attribute Tunnel-Preference: Unknown or invalid value ":3:1" for attribute Tunnel-Preference (0) ldap: WARNING: Failed parsing value ":4:1" for attribute Tunnel-Preference: Unknown or invalid value ":4:1" for attribute Tunnel-Preference (0) ldap: WARNING: Failed parsing value ":5:1" for attribute Tunnel-Preference: Unknown or invalid value ":5:1" for attribute Tunnel-Preference (0) ldap: WARNING: Failed parsing value ":6:1" for attribute Tunnel-Preference: Unknown or invalid value ":6:1" for attribute Tunnel-Preference (0) ldap: WARNING: Failed parsing value ":7:1" for attribute Tunnel-Preference: Unknown or invalid value ":7:1" for attribute Tunnel-Preference (0) ldap: No attributes updated for RHS radiusTunnelPreference (0) ldap: reply::Cisco-AVPair = 'ip:dns-servers=208.67.222.222 208.67.220.220' (0) ldap: Processing user attributes (0) ldap: control:Password-With-Header += 'seekrit' (0) ldap: reply:Framed-IP-Netmask := 255.255.255.255 (0) ldap: reply:Framed-IP-Address := EE.FF.180.1 rlm_ldap (ldap): Released connection (0) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (0) [ldap] = updated (0) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (0) pap: Removing &control:Password-With-Header (0) [pap] = updated (0) } # authorize = updated (0) Found Auth-Type = PAP (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Auth-Type PAP { (0) pap: Login attempt with password (0) pap: Comparing with "known good" Cleartext-Password (0) pap: User authenticated successfully (0) [pap] = ok (0) } # Auth-Type PAP = ok (0) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (0) post-auth { (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (0) update { (0) No attributes updated for RHS &session-state: (0) } # update = noop (0) sqlippool: Framed-IP-Address already exists (0) sqlippool: EXPAND Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name}) (0) sqlippool: --> Existing IP: EE.FF.180.1 (did cli port 0 user testprog2(a)redacteddomain.com) (0) [sqlippool] = noop (0) sql: EXPAND .query (0) sql: --> .query (0) sql: Using query template 'query' rlm_sql (sql): Reserved connection (0) (0) sql: EXPAND %{User-Name} (0) sql: --> testprog2(a)redacteddomain.com (0) sql: SQL-User-Name set to 'testprog2(a)redacteddomain.com' (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate ) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S.%M' ) (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate ) VALUES ( 'testprog2(a)redacteddomain.com', 'seekrit', 'Access-Accept', '2025-02-24 16:59:22.395281' ) (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate ) VALUES ( 'testprog2(a)redacteddomain.com', 'seekrit', 'Access-Accept', '2025-02-24 16:59:22.395281' ) (0) sql: SQL query returned: success (0) sql: 1 record(s) updated rlm_sql (sql): Released connection (0) Need more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used (0) [sql] = ok (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) if (EAP-Key-Name && &reply:EAP-Session-Id) { (0) if (EAP-Key-Name && &reply:EAP-Session-Id) -> FALSE (0) } # post-auth = ok (0) Login OK: [testprog2(a)redacteddomain.com/seekrit] (from client radius2 port 0) (0) Sent Access-Accept Id 218 from 172.XX.2.11:1812 to 172.XX.2.12:53346 length 438 (0) Service-Type := Framed-User (0) Idle-Timeout := 0 (0) Session-Timeout := 0 (0) Framed-Protocol := PPP (0) Tunnel-Server-Endpoint += ":0:AA.BB.20.106" (0) Tunnel-Server-Endpoint += ":1:AA.BB.20.114" (0) Tunnel-Server-Endpoint += ":2:CC.DD.80.26" (0) Tunnel-Server-Endpoint += ":3:CC.DD.80.74" (0) Tunnel-Server-Endpoint += ":4:AA.BB.20.107" (0) Tunnel-Server-Endpoint += ":5:AA.BB.20.115" (0) Tunnel-Server-Endpoint += ":6:CC.DD.80.27" (0) Tunnel-Server-Endpoint += ":7:CC.DD.80.75" (0) Tunnel-Password += ":0:providersecret" (0) Tunnel-Password += ":1:providersecret" (0) Tunnel-Password += ":2:providersecret" (0) Tunnel-Password += ":3:providersecret" (0) Tunnel-Password += ":4:providersecret" (0) Tunnel-Password += ":5:providersecret" (0) Tunnel-Password += ":6:providersecret" (0) Tunnel-Password += ":7:providersecret" (0) Cisco-AVPair = "ip:dns-servers=208.67.222.222 208.67.220.220" (0) Framed-IP-Netmask := 255.255.255.255 (0) Framed-IP-Address := EE.FF.180.1 (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 218 with timestamp +6 due to cleanup_delay was reached Ready to process requests -- Ron Grant Balan Software/Networks Network Architecture & Programming 604-737-2113 ca.linkedin.com/in/obiron

3 15