- Freeradius-Users - lists.freeradius.org

Freeradius + Mysql + PEAP Authentication
by RAZAFIMBELO Faliharinohatra Rindra 24 Jan '12

24 Jan '12

Hi all, I have configured a freeradius + mysql server and i would like to use the PEAP authentication. I have tried the EAP-TTLS and it worked fine, but when i have tested the PEAP authentication all my requests were rejected by freeradius. I saw that both of PEAP and EAP-TTLS used TLS and i thought that there was no need to make big configuration to migrate from EAP-TTLS to PEAP. Can someone help me, please? I use freeradius 2.1.10 and here is my eap.conf configuration: eap { default_eap_type = ttls timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 md5 { } leap { } gtc { auth_type = PAP } tls { certdir = ${confdir}/certs cadir = ${confdir}/certs private_key_password = madaoil452 private_key_file = ${certdir}/server.key certificate_file = ${certdir}/server.pem CA_file = ${cadir}/ca.pem dh_file = ${certdir}/dh random_file = /dev/urandom CA_path = ${cadir} cipher_list = "DEFAULT" cache { enable = no max_entries = 255 } verify { } } ttls { default_eap_type = md5 copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } peap { default_eap_type = mschapv2 copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } mschapv2 { } } thx --

2 3

Using sql and userfile together
by Krzysztof Grobelak 24 Jan '12

24 Jan '12

Hello all, I just wanted to ask how could I make FR to use either users file or sql to send attributes based on the NAS ip address. I suspect that I would need to use ulang for that. Something like: if(NAS-IP-Address == NAS A IP) { use sql } else { use users file } I'm just wondering what is the proper syntax of making FR use sql or user file. Kind regards, Krzysztof

2 2

LDAP Group assign to vlan after AD user authentication
by James 24 Jan '12

24 Jan '12

Hi, I've successfully set up a radius server to support 802.1x authentication using peap mschapv2 and samba to authenticate users against AD. To do this I followed configuration on the freeradius.org website and the AD integration howto on deployingradius.com, thank you very much for writing these! I now need to assign the vlan due to membership of some group in AD and I understand that an ldap lookup is needed. Where in the configuration do I check this group and map it to a vlan? Can I do it as a default entry in the users file or is it needed somewhere else? Thank you very much, James

4 6

Re: Freeradius-Users Digest, Vol 81, Issue 79
by Rui Ribeiro 24 Jan '12

24 Jan '12

> > ------------------------------ > > Message: 2 > Date: Tue, 24 Jan 2012 13:53:10 +1100 > From: Claude Brown <Claude.Brown(a)vividwireless.com.au> > Subject: RE: Cannot control attribute ordering via "rlm_perl" > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: > <5D6D54E9C21AB94EB5620F1078C21C14379D535B98(a)POSTOFFICE01.UNWAust.local> > > Content-Type: text/plain; charset="us-ascii" > > Bjorn, > > Thanks. > >> >> You don't even need to be that careful. Just run a read-only mysql >> slave instance locally on the radius server and all mysql-related >> performance problems will vanish. >> > > We didn't try this. > > Our design goal is: > - 250K users all needing to get on the network at the same time > - each user performing 7 authentications during EAP negotiation > - one hour duration to get everyone sorted > > This is about 486 authentications per second. I'm sure that a MySQL configuration can be constructed to achieve this, but I'm not confident it would be a simple setup. In contrast, the "files" module easily does this with a trivial configuration. > > In any case, assuming MySQL can be configured appropriately, I believe the thread-loss stability issue we experienced with high authentication rates would remain. See my longer reply to Alan for more details. > >> >> If you do mysql accounting: use buffered-sql aka decoupled-accounting. >> It won't fix the performance issues on your accounting mysql-server, but >> it will decouple the radius server from any such problems. >> > > Yes, we did use this feature to move the accounting backlog from the radius clients into the on-disk buffer. > > However, as you note it doesn't solve the accounting performance issues on the database. This was a significant issue for us as we are only able to learn the customers IP address (needed for many business processed) from the "accounting start" request. If this is delayed due to an avalanche of requests it affects customers in certain business states. > > We were able to gain a significant performance improvement over and above "rlm_sql" accounting by writing the essential data to a flat-file and then batch-loading that into the SQL database. > > The improvement came down to SQL transactions - the batch load only created one transaction for 1000's of accounting events rather than one transaction per event. > > Cheers, > > Claude. > Cheers, I too have used MySQL in DHCP configurations with some non-expected behaviours. Out of curiosity, have you ever looked at using OpenLDAP? Performance wise it seems a better solution than MySQL? Regards, Rui Ribeiro

1 0

Re: Freeradius-Users Digest, Vol 81, Issue 79
by Rui Ribeiro 24 Jan '12

24 Jan '12

> > > Message: 3 > Date: Tue, 24 Jan 2012 08:23:45 +0100 > From: NdK <ndk.clanbo(a)gmail.com> > Subject: Re: LDAP Group assign to vlan after AD user authentication > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Message-ID: <4F1E5C81.9080209(a)gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > Il 23/01/2012 14:48, Arnaud Loonstra ha scritto: > >> But I reckon you could also do something like that in post-auth section >> if (Ldap-Group == "cn=mygroup,ou=groups,o=radius") { >> update reply { >> Tunnel-type = VLAN >> Tunnel-medium-type = IEEE-802 >> Tunnel-Private-Group-Id = 1 >> } >> } > I think it could be possible to do the same using exec, a script and > wbinfo... Just still don't know how. > With > for T in $(wbinfo --user-domgroups `wbinfo -n <ADusername>`) ; do > wbinfo -s $T; > done > I can get all AD groups <ADusername> is into. Checking group membership > would be even easier. But how do I set Tunnel-Private-Group-Id from an > exec-ed script? > > BYtE, > Diego. > I checked it up with modifying the ldap module and then using the users file, at least for non-roaming users. Found out also by trial and error the output of wbinfo is not consistent. Best regards, Rui Ribeiro

1 0

openLDAP authorization with PAP authentication‏
by Jay Ludlow 23 Jan '12

23 Jan '12

Thank you for the help. In addition to removing the unix option from the /sites-available/default authorize section, I also had to remove the 'encryption schema = "ssha"' from /modules/pap in order for it to work. I was also able to comment out "password_attribute = userPassword" from modules/ldap again and it still works. Just figured I would send this to let others trying to do the same thing that I made some unnecessary changes but it works now. Now lets see if I can keep it working when I add my WPA to do the authentication.

1 0

Segfault in 2.1.10 backports version advice
by Arnaud Loonstra 23 Jan '12

23 Jan '12

Any advice on a segfault situation...? Jan 23 13:29:17 LX800476 kernel: [1366692.780725] freeradius[23459]: segfault at 8 ip b7461326 sp b5105988 error 4 in libc-2.7.so[b7403000+155000] Running a backports verison of freeradius on Debian Lenny: 2.1.10+dfsg-2~bpo50+1, 2.6.26-2-686 on Vmware ESX cluster. I cannot reproduce it on a test server and it only happens in production. Probably a load thing...? I could upgrade to current stable version in git, I could upgrade the OS (Lenny to Squeeze). Debugging from this backports version seems an impossible road? Or I could install the -dbg version and perhaps run the server in a screen session? However I have experienced it won't crash if run in debug mode (-X). I reckon in -X it is run in single threaded mode? Rg, Arnaud

5 6

eapol_test giving up and win-like error?
by NdK 23 Jan '12

23 Jan '12

Hi all. I think I'm near to correctly configure my server... but I incur in a situation that IIUC should be related to win clients only: I get -8<-- WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x6ac8f8c260c3e171 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -8<-- message and *eapol_test* (run from a *linux* machine!) gives up after about 10 seconds. I checked the FAQ, but couldn't find anything useful. The certs I'm using are from internal CA (actually from an internal intermediate CA, cert chain is certs/ca.pem and is 4.5k; root CA's self-signed cert is pointed by ca_cert= in eapol_test's config file). Server is a plain Debian Squeeze, plus SAMBA 3.5.6 and FreeRADIUS 2.1.10 . Domain is correctly joined and winbindd is running. I followed steps described in http://deployingradius.com/documents/configuration/active_directory.html (then noticed that the two references to ntlm_auth in authenticate sections aren't needed for mschapv2: ntlm_auth gets called by mschap module). The complete output from freeradius -X is: FreeRADIUS Version 2.1.10, for host x86_64-pc-linux-gnu, built on Nov 14 2010 at 21:12:30 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/dynamic_clients including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/opendirectory including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 137.204.65.161 { require_message_authenticator = no secret = "testing123qaz" } client 137.204.65.96 { require_message_authenticator = no secret = "testing123qaz" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = no require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{%{mschap:User-Name}:-%{User-Name:-None}} --domain=%{%{mschap:NT-Domain}:-PERSONALE} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } verify { } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/modules/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /etc/freeradius/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/freeradius/modules/digest Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/freeradius/modules/detail detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 137.204.65.96 port 37126, id=0, length=154 User-Name = "PERSONALE\\diego.zuccato" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0200001c01504552534f4e414c455c646965676f2e7a75636361746f Message-Authenticator = 0xc68141559c87212c55a2b2741272d0dd # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "PERSONALE\diego.zuccato", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 0 length 28 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 0 to 137.204.65.96 port 37126 EAP-Message = 0x010100160410dc4a25c479305ea4fe8c21f192a4dca4 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x43ef683543ee6c2a6e7507d0df55eb21 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 137.204.65.96 port 37126, id=1, length=150 User-Name = "PERSONALE\\diego.zuccato" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020100060319 State = 0x43ef683543ee6c2a6e7507d0df55eb21 Message-Authenticator = 0x4edf220dd0140e17c8aa0857f1b5e29d # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "PERSONALE\diego.zuccato", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 1 to 137.204.65.96 port 37126 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x43ef683542ed712a6e7507d0df55eb21 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 137.204.65.96 port 37126, id=2, length=362 User-Name = "PERSONALE\\diego.zuccato" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020200da1980000000d016030100cb010000c703014f16ccffb3c34f03f4a77654249ab0c21036cd3ece504dc05416ca3a2aea6a2900005ac014c00a0039003800880087c00fc00500350084c012c00800160013c00dc003000ac013c00900330032009a009900450044c00ec004002f00960041c011c007c00cc002000500040015001200090014001100080006000300ff01000044000b000403000102000a00340032000100020003000400050006000700080009000a000b000c000d000e000f001000110012001300140015001600170018001900230000 State = 0x43ef683542ed712a6e7507d0df55eb21 Message-Authenticator = 0x4c68e829881215fc01e273ba9cf55d20 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "PERSONALE\diego.zuccato", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 218 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 208 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 00cb], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 11ab], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 018d], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 2 to 137.204.65.96 port 37126 EAP-Message = 0x0103040019c00000138116030100310200002d03014f16ccfd1c402dae323a0ef21e5d8a5afe0821a5d3dda9f1705e28a95d80f6f9000039000005ff0100010016030111ab0b0011a70011a40004d6308204d2308202baa003020102020112300d06092a864886f70d01010505003081ba310b3009060355040613024954310e300c060355040813054974616c793110300e06035504071307426f6c6f676e61311e301c060355040a1315556e697665727369746120646920426f6c6f676e6131233021060355040b131a446970617274696d656e746f20646920417374726f6e6f6d69613120301e06035504031317417374726f6e6f6d6961202d20 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xf4833fe432eb73f52556205b Message-Authenticator = 0x00000000000000000000000000000000 State = 0x43ef683541ec712a6e7507d0df55eb21 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 137.204.65.96 port 37126, id=3, length=150 User-Name = "PERSONALE\\diego.zuccato" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020300061900 State = 0x43ef683541ec712a6e7507d0df55eb21 Message-Authenticator = 0xe97e4b03dcea854e92f7807e5a1fec21 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "PERSONALE\diego.zuccato", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 3 to 137.204.65.96 port 37126 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x57c1c75cb275e2dc Message-Authenticator = 0x00000000000000000000000000000000 State = 0x43ef683540eb712a6e7507d0df55eb21 Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 137.204.65.96 port 37126, id=4, length=150 User-Name = "PERSONALE\\diego.zuccato" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020400061900 State = 0x43ef683540eb712a6e7507d0df55eb21 Message-Authenticator = 0x9e08902da5fd2b646400ed4b41e91a21 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "PERSONALE\diego.zuccato", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 4 to 137.204.65.96 port 37126 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x060355040a131555 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x43ef683547ea712a6e7507d0df55eb21 Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 137.204.65.96 port 37126, id=5, length=150 User-Name = "PERSONALE\\diego.zuccato" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020500061900 State = 0x43ef683547ea712a6e7507d0df55eb21 Message-Authenticator = 0x91d8e3c1b56da793b962e80700e26bf2 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "PERSONALE\diego.zuccato", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 5 to 137.204.65.96 port 37126 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x7465300d06092a86 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x43ef683546e9712a6e7507d0df55eb21 Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 137.204.65.96 port 37126, id=6, length=150 User-Name = "PERSONALE\\diego.zuccato" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020600061900 State = 0x43ef683546e9712a6e7507d0df55eb21 Message-Authenticator = 0x077edb2d3f7d2398c30c8ca6cfcd209c # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "PERSONALE\diego.zuccato", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 6 to 137.204.65.96 port 37126 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xb7377cd6c3e2bc0560065d66f46f1cf1802f5c5c309ef2d7156c4709fc094fe932a2e4f553aff9247e6cc8d1d60080209fb36f0a4e491d426154c9f662928c6445de6500998cb2b80a31771909359d6937b561e921877fb7632e2dce99a514c758abcad7e532a631a5beea379bec1cb119ae9a8fca9d8e876737f7077dbccacc5602f69445d55c5854c39e44dbb7f587d6333461ca65b220927bcbfdc01ca1c61d49a0145e663b6c763d233c29516816030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x43ef683545e8712a6e7507d0df55eb21 Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 137.204.65.96 port 37126, id=7, length=352 User-Name = "PERSONALE\\diego.zuccato" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020700d01980000000c6160301008610000082008058cb301e009d8318a60397ed75c8861dd36756ba2532b32838c82c63fa01249f74e1c82e7135b99af9f09cbaa421dd2ce762f4ee6cd653997fa66efb83e6eaf0c759aa67254341e7757487383ca57593ad791519575b775f4621f717f33504c13fdb6d446ce886d493c4a90d876de51c7fc2c13e25ec6e5ab26fad4279f7db7614030100010116030100300dede37dfec28dc8fa13099ce8dfaf7fcb620f48ac259780509a498d305d802212a9e74110e87c0de8945581b1b76d41 State = 0x43ef683545e8712a6e7507d0df55eb21 Message-Authenticator = 0x914cd62018f2bacb1b5e43844427bfe2 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "PERSONALE\diego.zuccato", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 208 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 198 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 7 to 137.204.65.96 port 37126 EAP-Message = 0x010800411900140301000101160301003077355cb0da486b0aea4ca9ed045399695f9f681ed77edc1ced530c75ee8779af5a6e22760acf506e1ff11ff69292a1c0 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x43ef683544e7712a6e7507d0df55eb21 Finished request 7. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 137.204.65.96 port 37126, id=8, length=150 User-Name = "PERSONALE\\diego.zuccato" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020800061900 State = 0x43ef683544e7712a6e7507d0df55eb21 Message-Authenticator = 0x95f257485417d82e8bf94ed289656605 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "PERSONALE\diego.zuccato", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 8 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] returns handled Sending Access-Challenge of id 8 to 137.204.65.96 port 37126 EAP-Message = 0x0109002b1900170301002011b3a4baaef394361a7512b0601adb69cd64e7af2263a874925458c57cbb06d5 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x43ef68354be6712a6e7507d0df55eb21 Finished request 8. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 137.204.65.96 port 37126, id=9, length=240 User-Name = "PERSONALE\\diego.zuccato" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0209006019001703010020ca89e914288890073989835b87135e61d123f1b99c9e9dbb59bd00e538fe267017030100303a5233f9f866703fc729d93881a51dfafcf7c271b58e4ad2025ca975dc66e1f50926ecc360a99ed05e0484657b041e79 State = 0x43ef68354be6712a6e7507d0df55eb21 Message-Authenticator = 0x53a08dffdbbacff3b1b6fba2481f6a23 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "PERSONALE\diego.zuccato", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 9 length 96 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - PERSONALE\diego.zuccato [peap] Got inner identity 'PERSONALE\diego.zuccato' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x0209001c01504552534f4e414c455c646965676f2e7a75636361746f server { PEAP: Setting User-Name to PERSONALE\diego.zuccato Sending tunneled request EAP-Message = 0x0209001c01504552534f4e414c455c646965676f2e7a75636361746f FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "PERSONALE\\diego.zuccato" server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "PERSONALE\diego.zuccato", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 9 length 28 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x010a00311a010a002c107cfe362585aadb4fa23845b02bcfe01d504552534f4e414c455c646965676f2e7a75636361746f Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd1443252d14e285c0e8360ebb6b84386 [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010a00311a010a002c107cfe362585aadb4fa23845b02bcfe01d504552534f4e414c455c646965676f2e7a75636361746f Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd1443252d14e285c0e8360ebb6b84386 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 9 to 137.204.65.96 port 37126 EAP-Message = 0x010a005b19001703010050f9cbc0b02898cb8b33b5aadcf2e5d786e51996bf476af50b8bac872bf606a14a926337af4751a874a5d9847d53369d80d8176dcc4b04a7d78c9d24b8793710676b922857e73b358ee7614e9ff31ff80a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x43ef68354ae5712a6e7507d0df55eb21 Finished request 9. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 137.204.65.96 port 37126, id=10, length=304 User-Name = "PERSONALE\\diego.zuccato" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020a00a01900170301002008596c1f4e70f289a40e621c9dcf0ca40054e79c53f3e2388597359078fe736f1703010070f7b6bde3723b7339008514fd27e63539ac816a7ad2b544ba51e6d690a98eb2985001bb97e6f4ece90a0f0ce5f8680c419e69036afd840b4d9db82fbf2d7f23ec150e3f114d9dfa21a178c3fe04182c840280a7c9a3881db001030c51d19214a245322d9693b21991dc342a7c361803e6 State = 0x43ef68354ae5712a6e7507d0df55eb21 Message-Authenticator = 0x87426031892e2deae424d6c68b5add28 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "PERSONALE\diego.zuccato", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 10 length 160 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020a00521a020a004d315a07b47ea772821852bfa4a104f82bda000000000000000060eb877432cb1abb8ee542673b52a0350cf856409285d6ac00504552534f4e414c455c646965676f2e7a75636361746f server { PEAP: Setting User-Name to PERSONALE\diego.zuccato Sending tunneled request EAP-Message = 0x020a00521a020a004d315a07b47ea772821852bfa4a104f82bda000000000000000060eb877432cb1abb8ee542673b52a0350cf856409285d6ac00504552534f4e414c455c646965676f2e7a75636361746f FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "PERSONALE\\diego.zuccato" State = 0xd1443252d14e285c0e8360ebb6b84386 server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "PERSONALE\diego.zuccato", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 10 length 82 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel [mschapv2] +- entering group MS-CHAP {...} [mschap] Creating challenge hash with username: diego.zuccato [mschap] Told to do MS-CHAPv2 for diego.zuccato with NT-Password [mschap] expand: %{mschap:User-Name} -> diego.zuccato [mschap] expand: --username=%{%{mschap:User-Name}:-%{User-Name:-None}} -> --username=diego.zuccato [mschap] expand: %{mschap:NT-Domain} -> PERSONALE [mschap] expand: --domain=%{%{mschap:NT-Domain}:-PERSONALE} -> --domain=PERSONALE [mschap] mschap2: 7c [mschap] Creating challenge hash with username: diego.zuccato [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=a386f8c169a1c226 [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=60eb877432cb1abb8ee542673b52a0350cf856409285d6ac Exec-Program output: NT_KEY: 9BB45778B8201310A484C797422B8D27 Exec-Program-Wait: plaintext: NT_KEY: 9BB45778B8201310A484C797422B8D27 Exec-Program: returned: 0 ++[mschap] returns ok MSCHAP Success ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x010b00331a030a002e533d37343331453632374644453739373334444344324534393334414138303431343633384142373037 Message-Authenticator = 0x00000000000000000000000000000000 [mschapv2] +- entering group MS-CHAP {...} [mschap] Creating challenge hash with username: diego.zuccato [mschap] Told to do MS-CHAPv2 for diego.zuccato with NT-Password [mschap] expand: %{mschap:User-Name} -> diego.zuccato [mschap] expand: --username=%{%{mschap:User-Name}:-%{User-Name:-None}} -> --username=diego.zuccato [mschap] expand: %{mschap:NT-Domain} -> PERSONALE [mschap] expand: --domain=%{%{mschap:NT-Domain}:-PERSONALE} -> --domain=PERSONALE [mschap] mschap2: 7c [mschap] Creating challenge hash with username: diego.zuccato [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=a386f8c169a1c226 [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=60eb877432cb1abb8ee542673b52a0350cf856409285d6ac Exec-Program output: NT_KEY: 9BB45778B8201310A484C797422B8D27 Exec-Program-Wait: plaintext: NT_KEY: 9BB45778B8201310A484C797422B8D27 Exec-Program: returned: 0 ++[mschap] returns ok MSCHAP Success ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x010b00331a030a002e533d37343331453632374644453739373334444344324534393334414138303431343633384142373037 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd1443252d04f285c0e8360ebb6b84386 [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010b00331a030a002e533d37343331453632374644453739373334444344324534393334414138303431343633384142373037 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd1443252d04f285c0e8360ebb6b84386 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 10 to 137.204.65.96 port 37126 EAP-Message = 0x010b005b1900170301005045ddd3dfa215dc299b05eb6e78c8401b338a72d790e0c9a68dda5b5b37965481bc9986b0305597baa1886b95b644924146f8e906975675912df555716751ebb66b407cc46ceb46a84c17ac8b178aa6c1 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x43ef683549e4712a6e7507d0df55eb21 Finished request 10. Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 0 with timestamp +8 Cleaning up request 1 ID 1 with timestamp +8 Cleaning up request 2 ID 2 with timestamp +8 Cleaning up request 3 ID 3 with timestamp +8 Cleaning up request 4 ID 4 with timestamp +8 Cleaning up request 5 ID 5 with timestamp +8 Cleaning up request 6 ID 6 with timestamp +8 Cleaning up request 7 ID 7 with timestamp +8 Cleaning up request 8 ID 8 with timestamp +8 Cleaning up request 9 ID 9 with timestamp +8 Cleaning up request 10 ID 10 with timestamp +8 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x43ef683549e4712a did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ready to process requests. Any hint? TIA! Diego.

4 12

Problem with MSCHAP and Freeradius authentication
by Dhiraj Gaur 23 Jan '12

23 Jan '12

Hi I have been trying to implement radius authetication server at my workplace. The idea is to have all wifi access points authenticate against a radius server. The radius server needs to pass authentication to a backend Active Directory server. I have been sucessful in authenticating wifi users against file based and SQL based authentication in radius. NTLM_AUTH using PAP also works fine, wherein plaintext password is sucessfully authenticated against the AD and I get an "Access-Accept". However when I pass the same credentials over CHAP, MSCHAP or EAP_MSCHAP the same is not working and I end up in a "Access-Reject". Seems like that the ntlm_auth program is not parsing the received encrypted password hence the authetication fails. MSCHAP is a requirement as wifi clients at my place mostly have eap supplicant. (Read in freeradius documentation that eap and ldap doesnt go hand in hand, I may be wrong at interpreting the same) The freeradius logs for all the cases is listed below. Radius gurus please point me to the right direction as to make MS_CHAP authentication owrk over ntlm_auth or ldap(if possible). PS: I did all the testing using JRadius simulator. Regards Dhiraj Gaur -------------------------- LOGS ------------------------------ rad_recv: Access-Request packet from host 192.168.3.210 port 32854, id=22, length=69 User-Name = "01546" User-Password = "xxxxxxxxxxx" --> (Plian Text password) NAS-IP-Address = 192.168.0.199 Message-Authenticator = 0x008294e58343b74ea977c228f5b5 ec5d Fri Jan 20 18:28:42 2012 : Info: +- entering group authorize {...} Fri Jan 20 18:28:42 2012 : Info: ++[preprocess] returns ok Fri Jan 20 18:28:42 2012 : Info: ++[chap] returns noop Fri Jan 20 18:28:42 2012 : Info: ++[mschap] returns noop Fri Jan 20 18:28:42 2012 : Info: [suffix] No '@' in User-Name = "01546", looking up realm NULL Fri Jan 20 18:28:42 2012 : Info: [suffix] No such realm "NULL" Fri Jan 20 18:28:42 2012 : Info: ++[suffix] returns noop Fri Jan 20 18:28:42 2012 : Info: [eap] No EAP-Message, not doing EAP Fri Jan 20 18:28:42 2012 : Info: ++[eap] returns noop Fri Jan 20 18:28:42 2012 : Info: [ntlm_auth] expand: --username=%{mschap:User-Name} -> --username=01546 Fri Jan 20 18:28:42 2012 : Info: [ntlm_auth] expand: --password=%{User-Password} -> --password=xxxxxxxxx --> (We can see the password in plaintext) Fri Jan 20 18:28:42 2012 : Debug: Exec-Program output: NT_STATUS_OK: Success (0x0) Fri Jan 20 18:28:42 2012 : Debug: Exec-Program-Wait: plaintext: NT_STATUS_OK: Success (0x0) Fri Jan 20 18:28:42 2012 : Debug: Exec-Program: returned: 0 Fri Jan 20 18:28:42 2012 : Info: ++[ntlm_auth] returns ok Fri Jan 20 18:28:42 2012 : Info: ++[expiration] returns noop Fri Jan 20 18:28:42 2012 : Info: ++[logintime] returns noop Fri Jan 20 18:28:42 2012 : Info: [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. Fri Jan 20 18:28:42 2012 : Info: ++[pap] returns noop Fri Jan 20 18:28:42 2012 : Info: ++? if (!control:Auth-Type) Fri Jan 20 18:28:42 2012 : Info: ? Evaluating !(control:Auth-Type) -> TRUE Fri Jan 20 18:28:42 2012 : Info: ++? if (!control:Auth-Type) -> TRUE Fri Jan 20 18:28:42 2012 : Info: ++- entering if (!control:Auth-Type) {...} Fri Jan 20 18:28:42 2012 : Info: +++[control] returns noop Fri Jan 20 18:28:42 2012 : Info: ++- if (!control:Auth-Type) returns noop Fri Jan 20 18:28:42 2012 : Info: Found Auth-Type = ntlm_auth Fri Jan 20 18:28:42 2012 : Info: +- entering group NTLM_AUTH {...} Fri Jan 20 18:28:42 2012 : Info: [ntlm_auth] expand: --username=%{mschap:User-Name} -> --username=01546 Fri Jan 20 18:28:42 2012 : Info: [ntlm_auth] expand: --password=%{User-Password} -> --password=xxxxxxxx Fri Jan 20 18:28:42 2012 : Debug: Exec-Program output: NT_STATUS_OK: Success (0x0) Fri Jan 20 18:28:42 2012 : Debug: Exec-Program-Wait: plaintext: NT_STATUS_OK: Success (0x0) Fri Jan 20 18:28:42 2012 : Debug: Exec-Program: returned: 0 Fri Jan 20 18:28:42 2012 : Info: ++[ntlm_auth] returns ok Fri Jan 20 18:28:42 2012 : Info: +- entering group post-auth {...} Fri Jan 20 18:28:42 2012 : Info: [ntlm_auth] expand: --username=%{mschap:User-Name} -> --username=01546 Fri Jan 20 18:28:42 2012 : Info: [ntlm_auth] expand: --password=%{User-Password} -> --password=xxxxxxxx Fri Jan 20 18:28:42 2012 : Debug: Exec-Program output: NT_STATUS_OK: Success (0x0) Fri Jan 20 18:28:42 2012 : Debug: Exec-Program-Wait: plaintext: NT_STATUS_OK: Success (0x0) Fri Jan 20 18:28:42 2012 : Debug: Exec-Program: returned: 0 Fri Jan 20 18:28:42 2012 : Info: ++[ntlm_auth] returns ok Fri Jan 20 18:28:42 2012 : Info: ++[exec] returns noop Sending Access-Accept of id 22 to 192.168.3.210 port 32854 JRADIUS CLINET LOG Sending RADIUS Packet: ---------------------------------------------------------- Class: class net.jradius.packet.AccessRequest Attributes: User-Name := 01546 User-Password := [Encrypted String] NAS-IP-Address := 192.168.0.199 Message-Authenticator := [Binary Data (length=16)] Received RADIUS Packet: ---------------------------------------------------------- Class: class net.jradius.packet.AccessAccept Attributes: ----------------------------------------------------------------------- rad_recv: Access-Request packet from host 192.168.3.210 port 32854, id=22, length=88 User-Name = "01546" NAS-IP-Address = 192.168.0.199 CHAP-Challenge = 0xf454eecc38bb821eb32aa451728f6c57 CHAP-Password = 0x16aec775613540e9d4945ec5f116faf84e Message-Authenticator = 0xf231228e943e3b7de3d2de0f48b1c9c2 Fri Jan 20 18:29:27 2012 : Info: +- entering group authorize {...} Fri Jan 20 18:29:27 2012 : Info: ++[preprocess] returns ok Fri Jan 20 18:29:27 2012 : Info: [chap] Setting 'Auth-Type := CHAP' Fri Jan 20 18:29:27 2012 : Info: ++[chap] returns ok Fri Jan 20 18:29:27 2012 : Info: ++[mschap] returns noop Fri Jan 20 18:29:27 2012 : Info: [suffix] No '@' in User-Name = "01546", looking up realm NULL Fri Jan 20 18:29:27 2012 : Info: [suffix] No such realm "NULL" Fri Jan 20 18:29:27 2012 : Info: ++[suffix] returns noop Fri Jan 20 18:29:27 2012 : Info: [eap] No EAP-Message, not doing EAP Fri Jan 20 18:29:27 2012 : Info: ++[eap] returns noop Fri Jan 20 18:29:27 2012 : Info: [ntlm_auth] expand: --username=%{mschap:User-Name} -> --username=01546 Fri Jan 20 18:29:27 2012 : Info: [ntlm_auth] expand: --password=%{User-Password} -> --password= Fri Jan 20 18:29:27 2012 : Debug: Exec-Program output: NT_STATUS_WRONG_PASSWORD: Wrong Password (0xc000006a) Fri Jan 20 18:29:27 2012 : Debug: Exec-Program-Wait: plaintext: NT_STATUS_WRONG_PASSWORD: Wrong Password (0xc000006a) Fri Jan 20 18:29:27 2012 : Debug: Exec-Program: returned: 1 Fri Jan 20 18:29:27 2012 : Info: ++[ntlm_auth] returns reject Fri Jan 20 18:29:27 2012 : Info: Using Post-Auth-Type Reject Fri Jan 20 18:29:27 2012 : Info: +- entering group REJECT {...} Fri Jan 20 18:29:27 2012 : Info: [attr_filter.access_reject] expand: %{User-Name} -> 01546 Fri Jan 20 18:29:27 2012 : Debug: attr_filter: Matched entry DEFAULT at line 11 Fri Jan 20 18:29:27 2012 : Info: ++[attr_filter.access_reject] returns updated Fri Jan 20 18:29:27 2012 : Info: Delaying reject of request 5 for 1 seconds Fri Jan 20 18:29:27 2012 : Debug: Going to the next request Fri Jan 20 18:29:27 2012 : Debug: Waking up in 0.9 seconds. Fri Jan 20 18:29:28 2012 : Info: Sending delayed reject for request 5 Sending Access-Reject of id 22 to 192.168.3.210 port 32854 JRADIUS CLINET LOG Sending RADIUS Packet: ---------------------------------------------------------- Class: class net.jradius.packet.AccessRequest Attributes: User-Name := 01546 NAS-IP-Address := 192.168.0.199 CHAP-Challenge := [Binary Data (length=16)] CHAP-Password := [Binary Data (length=17)] Message-Authenticator := [Binary Data (length=16)] Received RADIUS Packet: ---------------------------------------------------------- Class: class net.jradius.packet.AccessReject Attributes: -------------------------------------------------------------------------------------- rad_recv: Access-Request packet from host 192.168.3.210 port 32854, id=23, length=133 User-Name = "01546" NAS-IP-Address = 192.168.0.199 MS-CHAP-Challenge = 0x4262788d507fdf3cc3a78a50f98c7a8e MS-CHAP2-Response = 0x00007062fd34e8a05d2996f236e49ea738580000000000000000f7b20a408df67dbcda3faf9290592064f165a9bcf6f37e8f Message-Authenticator = 0x92716bba8963b228666c070135f8245a Fri Jan 20 18:29:56 2012 : Info: +- entering group authorize {...} Fri Jan 20 18:29:56 2012 : Info: ++[preprocess] returns ok Fri Jan 20 18:29:56 2012 : Info: ++[chap] returns noop Fri Jan 20 18:29:56 2012 : Info: [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' Fri Jan 20 18:29:56 2012 : Info: ++[mschap] returns ok Fri Jan 20 18:29:56 2012 : Info: [suffix] No '@' in User-Name = "01546", looking up realm NULL Fri Jan 20 18:29:56 2012 : Info: [suffix] No such realm "NULL" Fri Jan 20 18:29:56 2012 : Info: ++[suffix] returns noop Fri Jan 20 18:29:56 2012 : Info: [eap] No EAP-Message, not doing EAP Fri Jan 20 18:29:56 2012 : Info: ++[eap] returns noop Fri Jan 20 18:29:56 2012 : Info: [ntlm_auth] expand: --username=%{mschap:User-Name} -> --username=01546 Fri Jan 20 18:29:56 2012 : Info: [ntlm_auth] expand: --password=%{User-Password} -> --password= Fri Jan 20 18:29:57 2012 : Debug: Exec-Program output: NT_STATUS_WRONG_PASSWORD: Wrong Password (0xc000006a) Fri Jan 20 18:29:57 2012 : Debug: Exec-Program-Wait: plaintext: NT_STATUS_WRONG_PASSWORD: Wrong Password (0xc000006a) Fri Jan 20 18:29:57 2012 : Debug: Exec-Program: returned: 1 Fri Jan 20 18:29:57 2012 : Info: ++[ntlm_auth] returns reject Fri Jan 20 18:29:57 2012 : Info: Using Post-Auth-Type Reject Fri Jan 20 18:29:57 2012 : Info: +- entering group REJECT {...} Fri Jan 20 18:29:57 2012 : Info: [attr_filter.access_reject] expand: %{User-Name} -> 01546 Fri Jan 20 18:29:57 2012 : Debug: attr_filter: Matched entry DEFAULT at line 11 Fri Jan 20 18:29:57 2012 : Info: ++[attr_filter.access_reject] returns updated Fri Jan 20 18:29:57 2012 : Info: Delaying reject of request 6 for 1 seconds Fri Jan 20 18:29:57 2012 : Debug: Going to the next request Fri Jan 20 18:29:57 2012 : Debug: Waking up in 0.8 seconds. Fri Jan 20 18:29:57 2012 : Info: Sending delayed reject for request 6 Sending Access-Reject of id 23 to 192.168.3.210 port 32854 JRADIUS CLINET LOG Sending RADIUS Packet: ---------------------------------------------------------- Class: class net.jradius.packet.AccessRequest Attributes: User-Name := 01546 NAS-IP-Address := 192.168.0.199 MS-CHAP-Challenge := [Binary Data (length=16)] MS-CHAP2-Response := [Binary Data (length=50)] Message-Authenticator := [Binary Data (length=16)] Received RADIUS Packet: ---------------------------------------------------------- Class: class net.jradius.packet.AccessReject Attributes: ----------------------------------------------------------------------------------------- rad_recv: Access-Request packet from host 192.168.3.210 port 32854, id=24, length=63 User-Name = "01546" NAS-IP-Address = 192.168.0.199 EAP-Message = 0x0200000a013031353436 Message-Authenticator = 0x2a95a91be9cb3f0d79d167ea048043f9 Fri Jan 20 18:30:30 2012 : Info: +- entering group authorize {...} Fri Jan 20 18:30:30 2012 : Info: ++[preprocess] returns ok Fri Jan 20 18:30:30 2012 : Info: ++[chap] returns noop Fri Jan 20 18:30:30 2012 : Info: ++[mschap] returns noop Fri Jan 20 18:30:30 2012 : Info: [suffix] No '@' in User-Name = "01546", looking up realm NULL Fri Jan 20 18:30:30 2012 : Info: [suffix] No such realm "NULL" Fri Jan 20 18:30:30 2012 : Info: ++[suffix] returns noop Fri Jan 20 18:30:30 2012 : Info: [eap] EAP packet type response id 0 length 10 Fri Jan 20 18:30:30 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Fri Jan 20 18:30:30 2012 : Info: ++[eap] returns updated Fri Jan 20 18:30:30 2012 : Info: [ntlm_auth] expand: --username=%{mschap:User-Name} -> --username=01546 Fri Jan 20 18:30:30 2012 : Info: [ntlm_auth] expand: --password=%{User-Password} -> --password= Fri Jan 20 18:30:30 2012 : Debug: Exec-Program output: NT_STATUS_WRONG_PASSWORD: Wrong Password (0xc000006a) Fri Jan 20 18:30:30 2012 : Debug: Exec-Program-Wait: plaintext: NT_STATUS_WRONG_PASSWORD: Wrong Password (0xc000006a) Fri Jan 20 18:30:30 2012 : Debug: Exec-Program: returned: 1 Fri Jan 20 18:30:30 2012 : Info: ++[ntlm_auth] returns reject Fri Jan 20 18:30:30 2012 : Info: Using Post-Auth-Type Reject Fri Jan 20 18:30:30 2012 : Info: +- entering group REJECT {...} Fri Jan 20 18:30:30 2012 : Info: [attr_filter.access_reject] expand: %{User-Name} -> 01546 Fri Jan 20 18:30:30 2012 : Debug: attr_filter: Matched entry DEFAULT at line 11 Fri Jan 20 18:30:30 2012 : Info: ++[attr_filter.access_reject] returns updated Fri Jan 20 18:30:30 2012 : Info: Delaying reject of request 7 for 1 seconds Fri Jan 20 18:30:30 2012 : Debug: Going to the next request Fri Jan 20 18:30:30 2012 : Debug: Waking up in 0.9 seconds. Fri Jan 20 18:30:31 2012 : Info: Sending delayed reject for request 7 Sending Access-Reject of id 24 to 192.168.3.210 port 32854 JRADIUS CLINET LOG Sending RADIUS Packet: ---------------------------------------------------------- Class: class net.jradius.packet.AccessRequest Attributes: User-Name := 01546 NAS-IP-Address := 192.168.0.199 EAP-Message := [Binary Data (length=10)] Message-Authenticator := [Binary Data (length=16)] Received RADIUS Packet: ---------------------------------------------------------- Class: class net.jradius.packet.AccessReject Attributes:

4 15

Freeradius + MySQL + WiFi PEAP authorisation only to a group of users
by Lumir Lindovsky 22 Jan '12

22 Jan '12

Hello, I would like to help with this: I have Freeradius version 2.1.6 I have it running with SQL and DialupAdmin. How do I give access to wifi users who authenticate with username & pass over PEAP only to a group of users? I mean that authorised would be only users from group WIFI and not other users belonging to other group like OpenVPN. Now it authorises everybody from the radcheck table. I am very new to radius and even if I was searching the net for some time I cannot find the answer which would fir my needs. Thank you for help! Lumir

4 5