- Freeradius-Users - lists.freeradius.org

Strange error in eapol_test
by Rui Ribeiro 18 Jan '12

18 Jan '12

Hi list, Still setting up a freeradius for eduroam -- internally it is working fine EAP, TTLS and al, however when proxying/connecting to the eduroam, everything seems ok in freeradius logs, however, eapol_test finishes with an error (WARNING: PMK mismatch -- MPPE keys OK: 0 mismatch: 1 FAILURE). Although in this example I have a certificate expired on the other side, I also have another roaming accounting that also has the same behaviour, so it is not the cause, I think. Any hints? I will send bellow eapol_test output and freeradius logs. Best regards, Rui radius2:/opt/bin/eduroam# /opt/bin/eapol_test -c peap-mschapv2-roaming.conf -s passsssss Reading configuration file 'peap-mschapv2-roaming.conf' Line: 4 - start of a new network block ssid - hexdump_ascii(len=7): 65 64 75 72 6f 61 6d eduroam key_mgmt: 0x1 eap methods - hexdump(len=16): 00 00 00 00 19 00 00 00 00 00 00 00 00 00 00 00 identity - hexdump_ascii(len=18): 69 73 63 74 65 40 72 6f 61 6d 2e 66 63 63 6e 2e iscte(a)roam.fccn. 70 74 pt anonymous_identity - hexdump_ascii(len=18): 69 73 63 74 65 40 72 6f 61 6d 2e 66 63 63 6e 2e iscte(a)roam.fccn. 70 74 pt password - hexdump_ascii(len=9): 72 30 61 6d 31 73 63 74 33 xxxxxxxxxxxx phase2 - hexdump_ascii(len=16): 61 75 74 68 65 61 70 3d 4d 53 43 48 41 50 56 32 autheap=MSCHAPV2 Priority group 0 id=0 ssid='eduroam' Authentication server 127.0.0.1:1812 RADIUS local address: 127.0.0.1:28963 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portValid=0 EAPOL: External notification - portEnabled=1 EAPOL: SUPP_PAE entering state CONNECTING EAPOL: SUPP_BE entering state IDLE EAP: EAP entering state INITIALIZE EAP: EAP entering state IDLE Sending fake EAP-Request-Identity EAPOL: Received EAP-Packet frame EAPOL: SUPP_PAE entering state RESTART EAP: EAP entering state INITIALIZE EAP: EAP entering state IDLE EAPOL: SUPP_PAE entering state AUTHENTICATING EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Request id=0 method=1 vendor=0 vendorMethod=0 EAP: EAP entering state IDENTITY CTRL-EVENT-EAP-STARTED EAP authentication started EAP: EAP-Request Identity data - hexdump_ascii(len=0): EAP: using anonymous identity - hexdump_ascii(len=18): 69 73 63 74 65 40 72 6f 61 6d 2e 66 63 63 6e 2e iscte(a)roam.fccn. 70 74 pt EAP: EAP entering state SEND_RESPONSE EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RESPONSE EAPOL: txSuppRsp WPA: eapol_test_eapol_send(type=0 len=23) TX EAP -> RADIUS - hexdump(len=23): 02 00 00 17 01 69 73 63 74 65 40 72 6f 61 6d 2e 66 63 63 6e 2e 70 74 Encapsulating EAP message into a RADIUS packet Learned identity from EAP-Response-Identity - hexdump(len=18): 69 73 63 74 65 40 72 6f 61 6d 2e 66 63 63 6e 2e 70 74 Sending RADIUS message to authentication server RADIUS message: code=1 (Access-Request) identifier=0 length=144 Attribute 1 (User-Name) length=20 Value: 'iscte(a)roam.fccn.pt' Attribute 4 (NAS-IP-Address) length=6 Value: 127.0.0.1 Attribute 31 (Calling-Station-Id) length=19 Value: '02-00-00-00-00-01' Attribute 12 (Framed-MTU) length=6 Value: 1400 Attribute 61 (NAS-Port-Type) length=6 Value: 19 Attribute 77 (Connect-Info) length=24 Value: 'CONNECT 11Mbps 802.11b' Attribute 79 (EAP-Message) length=25 Value: 02 00 00 17 01 69 73 63 74 65 40 72 6f 61 6d 2e 66 63 63 6e 2e 70 74 Attribute 80 (Message-Authenticator) length=18 Value: 6a 6b 09 f3 d6 fe 46 19 27 3d 6c 52 8b e4 d7 d8 Next RADIUS client retransmit in 3 seconds EAPOL: SUPP_BE entering state RECEIVE Received 46 bytes from RADIUS server Received RADIUS message RADIUS message: code=11 (Access-Challenge) identifier=0 length=46 Attribute 79 (EAP-Message) length=8 Value: 01 01 00 06 19 21 Attribute 80 (Message-Authenticator) length=18 Value: e9 81 26 23 af d2 1d 4c 27 b9 8b 22 de 6f 4c 3e STA 02:00:00:00:00:01: Received RADIUS packet matched with a pending request, round trip time 0.03 sec RADIUS packet matching with station decapsulated EAP packet (code=1 id=1 len=6) from RADIUS server: EAP-Request-PEAP (25) EAPOL: Received EAP-Packet frame EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Request id=1 method=25 vendor=0 vendorMethod=0 EAP: EAP entering state GET_METHOD CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25 EAP: Initialize selected EAP method: vendor 0 method 25 (PEAP) TLS: Phase2 EAP types - hexdump(len=40): 00 00 00 00 04 00 00 00 00 00 00 00 1a 00 00 00 00 00 00 00 06 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00 11 00 00 00 TLS: using phase1 config options CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected EAP: EAP entering state METHOD SSL: Received packet(len=6) - Flags 0x21 EAP-PEAP: Start (server ver=1, own ver=1) EAP-PEAP: Using PEAP version 1 SSL: (where=0x10 ret=0x1) SSL: (where=0x1001 ret=0x1) SSL: SSL_connect:before/connect initialization SSL: (where=0x1001 ret=0x1) SSL: SSL_connect:SSLv3 write client hello A SSL: (where=0x1002 ret=0xffffffff) SSL: SSL_connect:error in SSLv3 read server hello A SSL: SSL_connect - want more data SSL: 95 bytes pending from ssl_out SSL: 95 bytes left to be sent out (of total 95 bytes) EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL EAP: EAP entering state SEND_RESPONSE EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RESPONSE EAPOL: txSuppRsp WPA: eapol_test_eapol_send(type=0 len=101) TX EAP -> RADIUS - hexdump(len=101): 02 01 00 65 19 01 16 03 01 00 5a 01 00 00 56 03 01 4f 15 9d a5 c5 f6 73 f8 76 01 d3 a8 bc f8 c4 9c c6 c6 6b 00 f2 e8 64 9e 61 c6 ca 79 f8 c2 40 d6 00 00 28 00 39 00 38 00 35 00 16 00 13 00 0a 00 33 00 32 00 2f 00 05 00 04 00 15 00 12 00 09 00 14 00 11 00 08 00 06 00 03 00 ff 02 01 00 00 04 00 23 00 00 Encapsulating EAP message into a RADIUS packet Sending RADIUS message to authentication server RADIUS message: code=1 (Access-Request) identifier=1 length=222 Attribute 1 (User-Name) length=20 Value: 'iscte(a)roam.fccn.pt' Attribute 4 (NAS-IP-Address) length=6 Value: 127.0.0.1 Attribute 31 (Calling-Station-Id) length=19 Value: '02-00-00-00-00-01' Attribute 12 (Framed-MTU) length=6 Value: 1400 Attribute 61 (NAS-Port-Type) length=6 Value: 19 Attribute 77 (Connect-Info) length=24 Value: 'CONNECT 11Mbps 802.11b' Attribute 79 (EAP-Message) length=103 Value: 02 01 00 65 19 01 16 03 01 00 5a 01 00 00 56 03 01 4f 15 9d a5 c5 f6 73 f8 76 01 d3 a8 bc f8 c4 9c c6 c6 6b 00 f2 e8 64 9e 61 c6 ca 79 f8 c2 40 d6 00 00 28 00 39 00 38 00 35 00 16 00 13 00 0a 00 33 00 32 00 2f 00 05 00 04 00 15 00 12 00 09 00 14 00 11 00 08 00 06 00 03 00 ff 02 01 00 00 04 00 23 00 00 Attribute 80 (Message-Authenticator) length=18 Value: f0 b0 e8 1c 6c 14 d7 5f 5c 8f 09 b2 d1 97 11 43 Next RADIUS client retransmit in 3 seconds EAPOL: SUPP_BE entering state RECEIVE Received 1056 bytes from RADIUS server Received RADIUS message RADIUS message: code=11 (Access-Challenge) identifier=1 length=1056 Attribute 79 (EAP-Message) length=255 Value: 01 02 03 f2 19 c1 00 00 06 7b 16 03 01 00 4a 02 00 00 46 03 01 4f 15 9d a5 99 7d 3a e2 a2 6d e1 67 75 9e 63 ff 0e b1 51 b0 1a 9a f1 54 39 b0 8d 0d e9 ca d2 a7 20 9d a9 c9 17 2f b2 10 0a 4a 20 1e 59 9a 2e 44 6f 43 1f cf d0 27 3f 48 40 55 68 72 ba b3 d6 1e d4 00 35 00 16 03 01 06 1e 0b 00 06 1a 00 06 17 00 03 3a 30 82 03 36 30 82 02 1e a0 03 02 01 02 02 01 09 30 0d 06 09 2a 86 48 86 f7 0d 01 01 04 05 00 30 20 31 1e 30 1c 06 09 2a 86 48 86 f7 0d 01 09 01 16 0f 70 73 69 6d 6f 65 73 40 66 63 63 6e 2e 70 74 30 1e 17 0d 30 35 30 32 31 35 31 36 31 31 33 38 5a 17 0d 30 37 30 32 30 35 31 36 31 31 33 38 5a 30 81 83 31 1e 30 1c 06 03 55 04 03 13 15 72 61 64 2d 63 76 2d 74 65 73 74 65 73 2e 66 63 63 6e 2e 70 74 31 0f 30 0d 06 03 55 04 08 13 06 4c 69 73 62 6f 61 Attribute 79 (EAP-Message) length=255 Value: 31 0b 30 09 06 03 55 04 06 13 02 50 54 31 1e 30 1c 06 09 2a 86 48 86 f7 0d 01 09 01 16 0f 70 73 69 6d 6f 65 73 40 66 63 63 6e 2e 70 74 31 0d 30 0b 06 03 55 04 0a 13 04 46 43 43 4e 31 14 30 12 06 03 55 04 0b 13 0b 54 65 6c 65 6d 61 74 69 63 6f 73 30 82 01 22 30 0d 06 09 2a 86 48 86 f7 0d 01 01 01 05 00 03 82 01 0f 00 30 82 01 0a 02 82 01 01 00 9c 3e 40 c6 96 ba 2d 59 73 54 f1 dc af ac 4b 6f c9 7b dd 38 cd 22 8f 08 b5 a1 f8 93 59 87 59 e5 4e 94 50 b8 c4 06 21 72 fe 5f dc 3b d1 d8 a4 fe f2 00 94 42 96 21 4c ae 25 44 d7 bc 9a 55 2f 46 8a 32 ca f7 a7 30 b0 63 df 20 2b c0 a0 ef f2 7d d8 dd 24 ec 2a 4b 21 2b a9 f7 d2 a6 01 17 0c 43 fc e3 41 ad 68 91 2b 82 7d 41 4c 5e be 05 db 1b 1f ce ad 3d 68 aa bb e4 bc fa 4a 60 a2 d8 36 e4 10 5e 87 32 df fc 77 84 e5 c0 Attribute 79 (EAP-Message) length=255 Value: 0b dc b9 58 19 11 1e 89 b8 1c da 83 e9 bd 6d 73 10 5d 24 34 ed 27 72 53 aa 68 87 24 a9 24 ed c1 3d 2a 37 17 2e d3 0f af 40 81 26 07 6d 88 9b 1a fc 72 d6 f6 eb fc 14 c1 6f fe 0b 61 80 bc 94 cd 86 c0 e8 f8 1c dc 76 2f f8 6f 88 04 fb 80 b9 b7 72 74 73 fb aa 27 4d 01 e9 99 de e3 29 81 e8 ed bb b9 b1 a6 89 03 cf 0c a6 f6 1a 2c 96 0b 0a 4a 79 bb c7 c4 1e 1d 02 03 01 00 01 a3 17 30 15 30 13 06 03 55 1d 25 04 0c 30 0a 06 08 2b 06 01 05 05 07 03 01 30 0d 06 09 2a 86 48 86 f7 0d 01 01 04 05 00 03 82 01 01 00 c5 6c ce 4f 56 41 ec 0b 80 6b 37 6e 95 95 3b 6e 9a a0 b2 4e 18 5d 4e bd 38 8c 28 72 ab ec bc 27 c7 4d 34 5d 4e 3e be d7 25 14 64 97 e9 fd 00 e0 fb f6 d0 ec bf 05 12 17 45 2a 67 c1 4e 97 f3 00 75 7d ea f0 3a 24 d8 d8 39 88 95 8c 01 59 bd 30 27 05 c8 52 3a Attribute 79 (EAP-Message) length=253 Value: 0a 97 b9 21 4b a6 3b fb 06 f7 92 98 98 56 fe 53 ec 6f b9 97 93 b3 5e 8d fc 75 98 47 77 a6 78 53 77 58 dd 5c 52 7a 9d ae 2c 77 33 9c cb 61 a7 1c 3a 22 ac 54 03 1a 36 99 1b b5 82 83 27 69 a4 a9 65 6a f1 8a 04 f4 10 53 e0 e5 9f 91 0d bc 70 82 61 d7 49 e3 cc cc ef 86 1d 6b 44 53 6e 90 16 d7 8b 22 47 2e 7d 53 b3 0e 1f 24 01 0f ce 86 4e 12 6a b4 fb 54 53 b5 99 1a a9 d6 77 dc 66 d8 04 c0 da 9a 12 27 5d 38 eb c4 d7 ac 2c 86 93 a9 12 e4 9d 13 4f 01 73 1b 16 ec 39 f5 3b ff d2 c0 78 4e 44 3b 59 f9 dd 71 8e d1 3b f2 50 00 02 d7 30 82 02 d3 30 82 01 bb a0 03 02 01 02 02 09 00 cf 11 a4 0b 54 c2 30 de 30 0d 06 09 2a 86 48 86 f7 0d 01 01 04 05 00 30 20 31 1e 30 1c 06 09 2a 86 48 86 f7 0d 01 09 01 16 0f 70 73 69 6d 6f 65 73 40 66 63 63 6e 2e 70 74 30 1e 17 0d Attribute 80 (Message-Authenticator) length=18 Value: dc 80 67 84 43 16 0e b0 a4 ae e3 24 a7 dc 77 3c STA 02:00:00:00:00:01: Received RADIUS packet matched with a pending request, round trip time 0.06 sec RADIUS packet matching with station decapsulated EAP packet (code=1 id=2 len=1010) from RADIUS server: EAP-Request-PEAP (25) EAPOL: Received EAP-Packet frame EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Request id=2 method=25 vendor=0 vendorMethod=0 EAP: EAP entering state METHOD SSL: Received packet(len=1010) - Flags 0xc1 SSL: TLS Message Length: 1659 SSL: Need 659 bytes more input data SSL: Building ACK (type=25 id=2 ver=1) EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL EAP: EAP entering state SEND_RESPONSE EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RESPONSE EAPOL: txSuppRsp WPA: eapol_test_eapol_send(type=0 len=6) TX EAP -> RADIUS - hexdump(len=6): 02 02 00 06 19 01 Encapsulating EAP message into a RADIUS packet Sending RADIUS message to authentication server RADIUS message: code=1 (Access-Request) identifier=2 length=127 Attribute 1 (User-Name) length=20 Value: 'iscte(a)roam.fccn.pt' Attribute 4 (NAS-IP-Address) length=6 Value: 127.0.0.1 Attribute 31 (Calling-Station-Id) length=19 Value: '02-00-00-00-00-01' Attribute 12 (Framed-MTU) length=6 Value: 1400 Attribute 61 (NAS-Port-Type) length=6 Value: 19 Attribute 77 (Connect-Info) length=24 Value: 'CONNECT 11Mbps 802.11b' Attribute 79 (EAP-Message) length=8 Value: 02 02 00 06 19 01 Attribute 80 (Message-Authenticator) length=18 Value: 6b 8c 7e b6 90 e5 56 8f fb 63 df c3 5a 6b 75 8e Next RADIUS client retransmit in 3 seconds EAPOL: SUPP_BE entering state RECEIVE Received 709 bytes from RADIUS server Received RADIUS message RADIUS message: code=11 (Access-Challenge) identifier=2 length=709 Attribute 79 (EAP-Message) length=255 Value: 01 03 02 99 19 01 30 35 30 32 31 35 31 34 34 35 31 39 5a 17 0d 30 36 30 32 31 35 31 34 34 35 31 39 5a 30 20 31 1e 30 1c 06 09 2a 86 48 86 f7 0d 01 09 01 16 0f 70 73 69 6d 6f 65 73 40 66 63 63 6e 2e 70 74 30 82 01 22 30 0d 06 09 2a 86 48 86 f7 0d 01 01 01 05 00 03 82 01 0f 00 30 82 01 0a 02 82 01 01 00 ce 05 f6 73 da ef 56 db 29 f8 b2 71 5f 3d 95 05 f0 db 08 d7 da d1 5b f7 c1 2e 34 96 e2 ce 99 91 54 18 3e 50 62 ef 8a fe 1c f2 44 97 e2 32 81 ad 74 ed 31 d7 b4 5c 33 3c 21 2a c8 54 e2 49 03 8b 25 f9 39 81 cb f8 24 37 e7 90 a9 ef 7d 51 0b c5 a9 10 1f 50 50 d1 bd 32 d4 03 b9 0e 4f 93 0b ad 3f 3c e7 bc c3 7b 30 21 b3 bc 34 ec 80 c1 09 fb e5 dd 2f 07 dc fe f8 38 3c aa 36 9b 77 7b 64 4f 29 b7 f2 09 31 6b c8 19 60 db 25 dd 19 ce 05 25 87 85 bd d4 07 56 cb 05 Attribute 79 (EAP-Message) length=255 Value: db ba f4 08 97 fa 98 fe d6 86 8c 40 78 f3 49 48 d7 c3 97 24 95 11 e2 dd af 1f 0c b0 3f 13 e8 51 1d a7 42 fb 46 16 ac 9f ad 9b 9e 61 3b 05 e2 50 9c fd a2 12 b4 96 43 c9 93 c0 5f c1 db e5 b5 23 d0 b4 b3 3b a3 de b6 00 d0 f8 f6 cb cf 32 e4 12 63 b8 17 07 d9 2e 5e 80 71 cd 18 59 f2 7c 09 4d 67 eb be 6e 3c 07 9f 75 02 03 01 00 01 a3 10 30 0e 30 0c 06 03 55 1d 13 04 05 30 03 01 01 ff 30 0d 06 09 2a 86 48 86 f7 0d 01 01 04 05 00 03 82 01 01 00 11 3b 6f b8 cb 0a 39 42 78 f3 5a 5d 11 8c b9 87 70 78 00 08 0a 36 33 a4 d0 65 8d 86 f0 00 e4 6a 7e aa d5 13 6a fe cb 91 0f 5d 65 17 fe 36 87 8c 5f 81 24 8f 38 85 61 db 0f 02 7e b2 1c 26 03 7b af 28 41 2a 08 85 ff fc 8e d6 4d 92 7b 9d f2 6a c3 9f 00 02 bb 06 73 35 63 10 61 47 5f 64 2e 66 a3 36 6a f1 4c a9 55 97 37 c0 Attribute 79 (EAP-Message) length=161 Value: a2 74 62 41 2c a6 e6 06 74 a1 b0 c4 c8 d0 d4 78 a3 b4 55 26 84 97 46 93 fb ad 38 70 bf ef 25 9a d1 ab 68 3d 6d 50 fa 35 4e 14 02 5b b3 81 e2 2f a7 26 49 dc 33 fa 76 dc 12 52 6e 46 9e fe 39 df 0c 24 ae f5 96 a8 46 4b 3e 5a b1 47 67 44 b5 fb eb 6c 42 7d 66 3f 8e b1 bc 10 49 9b 1d b4 28 b7 7c 59 0a 00 a1 e9 f0 85 c5 a7 db 25 f6 52 1e 8c 93 93 9b 25 f7 d8 ff 90 02 4e 93 fd c0 4a 56 54 83 76 3e 78 60 b3 59 56 a6 81 08 75 c4 51 b3 6d cb 40 e5 c0 1c 5a 16 03 01 00 04 0e 00 00 00 Attribute 80 (Message-Authenticator) length=18 Value: b7 46 fb 5b cb 21 63 7d d7 f0 c0 55 4d e5 8f 1d STA 02:00:00:00:00:01: Received RADIUS packet matched with a pending request, round trip time 0.06 sec RADIUS packet matching with station decapsulated EAP packet (code=1 id=3 len=665) from RADIUS server: EAP-Request-PEAP (25) EAPOL: Received EAP-Packet frame EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Request id=3 method=25 vendor=0 vendorMethod=0 EAP: EAP entering state METHOD SSL: Received packet(len=665) - Flags 0x01 SSL: (where=0x1001 ret=0x1) SSL: SSL_connect:SSLv3 read server hello A TLS: tls_verify_cb - preverify_ok=1 err=19 (self signed certificate in certificate chain) ca_cert_verify=0 depth=1 buf='/emailAddress=psimoes(a)fccn.pt' CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/emailAddress=psimoes(a)fccn.pt' TLS: tls_verify_cb - preverify_ok=1 err=10 (certificate has expired) ca_cert_verify=0 depth=1 buf='/emailAddress=psimoes(a)fccn.pt' CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/emailAddress=psimoes(a)fccn.pt' TLS: tls_verify_cb - preverify_ok=1 err=10 (certificate has expired) ca_cert_verify=0 depth=1 buf='/emailAddress=psimoes(a)fccn.pt' CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/emailAddress=psimoes(a)fccn.pt' TLS: tls_verify_cb - preverify_ok=1 err=10 (certificate has expired) ca_cert_verify=0 depth=0 buf='/CN=rad-cv-testes.fccn.pt/ST=Lisboa/C=PT/emailAddress=psimoes(a)fccn.pt/O=FCCN/OU=Telematicos' CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/CN=rad-cv-testes.fccn.pt/ST=Lisboa/C=PT/emailAddress=psimoes(a)fccn.pt/O=FCCN/OU=Telematicos' TLS: tls_verify_cb - preverify_ok=1 err=10 (certificate has expired) ca_cert_verify=0 depth=0 buf='/CN=rad-cv-testes.fccn.pt/ST=Lisboa/C=PT/emailAddress=psimoes(a)fccn.pt/O=FCCN/OU=Telematicos' CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/CN=rad-cv-testes.fccn.pt/ST=Lisboa/C=PT/emailAddress=psimoes(a)fccn.pt/O=FCCN/OU=Telematicos' SSL: (where=0x1001 ret=0x1) SSL: SSL_connect:SSLv3 read server certificate A SSL: (where=0x1001 ret=0x1) SSL: SSL_connect:SSLv3 read server done A SSL: (where=0x1001 ret=0x1) SSL: SSL_connect:SSLv3 write client key exchange A SSL: (where=0x1001 ret=0x1) SSL: SSL_connect:SSLv3 write change cipher spec A SSL: (where=0x1001 ret=0x1) SSL: SSL_connect:SSLv3 write finished A SSL: (where=0x1001 ret=0x1) SSL: SSL_connect:SSLv3 flush data SSL: (where=0x1002 ret=0xffffffff) SSL: SSL_connect:error in SSLv3 read finished A SSL: SSL_connect - want more data SSL: 326 bytes pending from ssl_out SSL: 326 bytes left to be sent out (of total 326 bytes) EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL EAP: EAP entering state SEND_RESPONSE EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RESPONSE EAPOL: txSuppRsp WPA: eapol_test_eapol_send(type=0 len=332) TX EAP -> RADIUS - hexdump(len=332): 02 03 01 4c 19 01 16 03 01 01 06 10 00 01 02 01 00 60 a5 f9 2f d4 3c 90 f5 ac 6c 65 0b 35 08 f7 d3 79 02 ec 80 aa b3 10 97 d1 dc b3 4f ef aa c6 7b 1e 92 c1 68 8e 0a f5 2f 67 89 67 d0 06 5c 96 7b 1d 4d af 4c 6f d7 79 83 e7 0a 50 8a da 6f 4d f1 fc a8 1d fa a5 df e0 09 e9 40 9a 21 91 15 98 06 51 71 52 9b 23 55 f2 f8 e5 ae c6 8f b8 a2 83 cf 16 d3 48 06 f1 c7 78 ed bc 25 d2 8a a9 8b dd b4 03 30 9c 3c 43 f2 4b 43 ab 17 e6 22 e6 c6 6c 63 82 a7 30 c3 79 f2 17 6e 60 96 8b 96 b9 ba 44 1a 96 93 41 1b 1e b4 8d 65 cd 1a dd aa 70 a2 f1 14 4f 92 ab 04 7b 5e a2 8a 59 39 d7 d5 13 b2 d7 19 06 79 40 59 2c 7f 71 c4 a3 49 80 9b 36 e7 88 db 5d 06 d8 02 a7 25 3a ac d4 ca 21 27 1a 53 d2 d9 60 f8 ca ab 68 8f 31 75 7b 79 31 4e e2 bb a3 cf 1d b0 a5 37 56 ca a8 b1 5b 42 10 be 46 85 91 65 fb 8b e3 76 bd ff 84 d8 6d e2 dd cd 05 fa 86 9c 14 03 01 00 01 01 16 03 01 00 30 cd 1e 4a 5d 45 6d 24 e4 50 55 1f e6 e2 03 c9 73 79 42 27 98 fd 4b 44 8b 99 7e db ca ef e1 22 9b bb 6f ae 9a fb 2a 43 4c 57 dc 4d c0 94 53 d9 8e Encapsulating EAP message into a RADIUS packet Sending RADIUS message to authentication server RADIUS message: code=1 (Access-Request) identifier=3 length=455 Attribute 1 (User-Name) length=20 Value: 'iscte(a)roam.fccn.pt' Attribute 4 (NAS-IP-Address) length=6 Value: 127.0.0.1 Attribute 31 (Calling-Station-Id) length=19 Value: '02-00-00-00-00-01' Attribute 12 (Framed-MTU) length=6 Value: 1400 Attribute 61 (NAS-Port-Type) length=6 Value: 19 Attribute 77 (Connect-Info) length=24 Value: 'CONNECT 11Mbps 802.11b' Attribute 79 (EAP-Message) length=255 Value: 02 03 01 4c 19 01 16 03 01 01 06 10 00 01 02 01 00 60 a5 f9 2f d4 3c 90 f5 ac 6c 65 0b 35 08 f7 d3 79 02 ec 80 aa b3 10 97 d1 dc b3 4f ef aa c6 7b 1e 92 c1 68 8e 0a f5 2f 67 89 67 d0 06 5c 96 7b 1d 4d af 4c 6f d7 79 83 e7 0a 50 8a da 6f 4d f1 fc a8 1d fa a5 df e0 09 e9 40 9a 21 91 15 98 06 51 71 52 9b 23 55 f2 f8 e5 ae c6 8f b8 a2 83 cf 16 d3 48 06 f1 c7 78 ed bc 25 d2 8a a9 8b dd b4 03 30 9c 3c 43 f2 4b 43 ab 17 e6 22 e6 c6 6c 63 82 a7 30 c3 79 f2 17 6e 60 96 8b 96 b9 ba 44 1a 96 93 41 1b 1e b4 8d 65 cd 1a dd aa 70 a2 f1 14 4f 92 ab 04 7b 5e a2 8a 59 39 d7 d5 13 b2 d7 19 06 79 40 59 2c 7f 71 c4 a3 49 80 9b 36 e7 88 db 5d 06 d8 02 a7 25 3a ac d4 ca 21 27 1a 53 d2 d9 60 f8 ca ab 68 8f 31 75 7b 79 31 4e e2 bb a3 cf 1d b0 a5 37 56 ca a8 b1 5b 42 10 be Attribute 79 (EAP-Message) length=81 Value: 46 85 91 65 fb 8b e3 76 bd ff 84 d8 6d e2 dd cd 05 fa 86 9c 14 03 01 00 01 01 16 03 01 00 30 cd 1e 4a 5d 45 6d 24 e4 50 55 1f e6 e2 03 c9 73 79 42 27 98 fd 4b 44 8b 99 7e db ca ef e1 22 9b bb 6f ae 9a fb 2a 43 4c 57 dc 4d c0 94 53 d9 8e Attribute 80 (Message-Authenticator) length=18 Value: b9 1f da af 64 06 b0 73 3b 7f 91 e9 48 3e e6 57 Next RADIUS client retransmit in 3 seconds EAPOL: SUPP_BE entering state RECEIVE Received 109 bytes from RADIUS server Received RADIUS message RADIUS message: code=11 (Access-Challenge) identifier=3 length=109 Attribute 79 (EAP-Message) length=71 Value: 01 04 00 45 19 81 00 00 00 3b 14 03 01 00 01 01 16 03 01 00 30 e2 76 e3 ef cd bf 27 37 9f ac dd a9 33 78 d6 b5 8b 06 72 00 7a 0e ff dc e0 79 0f 2f 37 ac 3d d9 a8 10 e3 4b 17 93 2a 35 28 a4 37 c3 3f da 12 c5 Attribute 80 (Message-Authenticator) length=18 Value: d4 c1 65 3a f0 b2 e1 80 ce bb f0 8d 86 ff 54 17 STA 02:00:00:00:00:01: Received RADIUS packet matched with a pending request, round trip time 0.16 sec RADIUS packet matching with station decapsulated EAP packet (code=1 id=4 len=69) from RADIUS server: EAP-Request-PEAP (25) EAPOL: Received EAP-Packet frame EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Request id=4 method=25 vendor=0 vendorMethod=0 EAP: EAP entering state METHOD SSL: Received packet(len=69) - Flags 0x81 SSL: TLS Message Length: 59 SSL: (where=0x1001 ret=0x1) SSL: SSL_connect:SSLv3 read finished A SSL: (where=0x20 ret=0x1) SSL: (where=0x1002 ret=0x1) SSL: 0 bytes pending from ssl_out SSL: No Application Data included SSL: No data to be sent out EAP-PEAP: TLS done, proceed to Phase 2 EAP-PEAP: using label 'client EAP encryption' in key derivation EAP-PEAP: Derived key - hexdump(len=64): b5 3a 8c 7f 8f 17 d1 1b a8 b8 a1 3d ca fa ba 06 85 9b ad f5 82 7d 23 76 dd 6a 43 ba 9c 1c ec 78 5a 3c 4b 88 19 71 fe c1 7e c4 a5 04 5c c0 25 36 fe a7 ca a2 b6 33 97 eb e8 f7 e5 f7 04 9a 1e 9f SSL: Building ACK (type=25 id=4 ver=1) EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL EAP: EAP entering state SEND_RESPONSE EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RESPONSE EAPOL: txSuppRsp WPA: eapol_test_eapol_send(type=0 len=6) TX EAP -> RADIUS - hexdump(len=6): 02 04 00 06 19 01 Encapsulating EAP message into a RADIUS packet Sending RADIUS message to authentication server RADIUS message: code=1 (Access-Request) identifier=4 length=127 Attribute 1 (User-Name) length=20 Value: 'iscte(a)roam.fccn.pt' Attribute 4 (NAS-IP-Address) length=6 Value: 127.0.0.1 Attribute 31 (Calling-Station-Id) length=19 Value: '02-00-00-00-00-01' Attribute 12 (Framed-MTU) length=6 Value: 1400 Attribute 61 (NAS-Port-Type) length=6 Value: 19 Attribute 77 (Connect-Info) length=24 Value: 'CONNECT 11Mbps 802.11b' Attribute 79 (EAP-Message) length=8 Value: 02 04 00 06 19 01 Attribute 80 (Message-Authenticator) length=18 Value: b9 a8 9d dd 12 bd ae f0 a7 70 5a 26 e2 64 9d c4 Next RADIUS client retransmit in 3 seconds EAPOL: SUPP_BE entering state RECEIVE Received 83 bytes from RADIUS server Received RADIUS message RADIUS message: code=11 (Access-Challenge) identifier=4 length=83 Attribute 79 (EAP-Message) length=45 Value: 01 05 00 2b 19 01 17 03 01 00 20 d2 ab 6c 49 63 f5 00 3a bf bf d7 fe 09 fb 32 f9 45 5f ef 30 c3 69 aa 7c 25 93 6f bf d3 bd 09 3a Attribute 80 (Message-Authenticator) length=18 Value: 66 d1 f4 59 59 7d 90 59 67 c6 df 28 8b cc 82 ef STA 02:00:00:00:00:01: Received RADIUS packet matched with a pending request, round trip time 0.03 sec RADIUS packet matching with station decapsulated EAP packet (code=1 id=5 len=43) from RADIUS server: EAP-Request-PEAP (25) EAPOL: Received EAP-Packet frame EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Request id=5 method=25 vendor=0 vendorMethod=0 EAP: EAP entering state METHOD SSL: Received packet(len=43) - Flags 0x01 EAP-PEAP: received 37 bytes encrypted data for Phase 2 EAP-PEAP: Decrypted Phase 2 EAP - hexdump(len=5): 01 00 00 05 01 EAP-PEAP: received Phase 2: code=1 identifier=0 length=5 EAP-PEAP: Phase 2 Request: type=1 EAP: using real identity - hexdump_ascii(len=18): 69 73 63 74 65 40 72 6f 61 6d 2e 66 63 63 6e 2e iscte(a)roam.fccn. 70 74 pt EAP-PEAP: Encrypting Phase 2 data - hexdump(len=23): 02 00 00 17 01 69 73 63 74 65 40 72 6f 61 6d 2e 66 63 63 6e 2e 70 74 SSL: 90 bytes left to be sent out (of total 90 bytes) EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL EAP: EAP entering state SEND_RESPONSE EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RESPONSE EAPOL: txSuppRsp WPA: eapol_test_eapol_send(type=0 len=96) TX EAP -> RADIUS - hexdump(len=96): 02 05 00 60 19 01 17 03 01 00 20 61 86 fa 5a 58 25 2e 3a 08 61 3e b2 b5 95 c3 f5 30 fa 6e 4f 31 ea 49 b3 81 59 96 af e3 40 69 7b 17 03 01 00 30 fa bd ef 3c 38 48 3f aa 0b 2a 9e 07 b8 9c a9 b0 33 31 90 67 46 a4 ad 8d dd 4a 89 4c 64 57 04 cd 56 63 e1 dc 6a 26 2c 5f 04 a3 b7 e3 71 7c c4 81 Encapsulating EAP message into a RADIUS packet Sending RADIUS message to authentication server RADIUS message: code=1 (Access-Request) identifier=5 length=217 Attribute 1 (User-Name) length=20 Value: 'iscte(a)roam.fccn.pt' Attribute 4 (NAS-IP-Address) length=6 Value: 127.0.0.1 Attribute 31 (Calling-Station-Id) length=19 Value: '02-00-00-00-00-01' Attribute 12 (Framed-MTU) length=6 Value: 1400 Attribute 61 (NAS-Port-Type) length=6 Value: 19 Attribute 77 (Connect-Info) length=24 Value: 'CONNECT 11Mbps 802.11b' Attribute 79 (EAP-Message) length=98 Value: 02 05 00 60 19 01 17 03 01 00 20 61 86 fa 5a 58 25 2e 3a 08 61 3e b2 b5 95 c3 f5 30 fa 6e 4f 31 ea 49 b3 81 59 96 af e3 40 69 7b 17 03 01 00 30 fa bd ef 3c 38 48 3f aa 0b 2a 9e 07 b8 9c a9 b0 33 31 90 67 46 a4 ad 8d dd 4a 89 4c 64 57 04 cd 56 63 e1 dc 6a 26 2c 5f 04 a3 b7 e3 71 7c c4 81 Attribute 80 (Message-Authenticator) length=18 Value: 11 4a 60 a4 56 bc 8f 75 e7 c3 23 88 57 ba ea d7 Next RADIUS client retransmit in 3 seconds EAPOL: SUPP_BE entering state RECEIVE Received 131 bytes from RADIUS server Received RADIUS message RADIUS message: code=11 (Access-Challenge) identifier=5 length=131 Attribute 79 (EAP-Message) length=93 Value: 01 06 00 5b 19 01 17 03 01 00 50 b8 e4 19 3b 90 e3 a5 c7 32 0f a8 d4 15 dd 4d 7b 47 a3 84 0a cf 4a d7 02 45 5d c9 48 18 6e ff 4d 1c 58 ce 6a ce 9d bb a2 7c de 87 20 99 2c c8 68 e7 e7 31 d0 98 92 47 d9 a8 8a 88 e6 5f 59 1d 5e 2c a5 e5 ae 0c 61 47 e6 ee bf aa e8 dd bd d3 49 Attribute 80 (Message-Authenticator) length=18 Value: 38 d0 0a 86 1a 73 ed 22 31 4a 56 f0 d9 02 93 3b STA 02:00:00:00:00:01: Received RADIUS packet matched with a pending request, round trip time 0.06 sec RADIUS packet matching with station decapsulated EAP packet (code=1 id=6 len=91) from RADIUS server: EAP-Request-PEAP (25) EAPOL: Received EAP-Packet frame EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Request id=6 method=25 vendor=0 vendorMethod=0 EAP: EAP entering state METHOD SSL: Received packet(len=91) - Flags 0x01 EAP-PEAP: received 85 bytes encrypted data for Phase 2 EAP-PEAP: Decrypted Phase 2 EAP - hexdump(len=47): 01 01 00 2f 1a 01 01 00 2a 10 98 20 2f 14 94 b5 56 d5 c0 12 dc cc 88 df 09 eb 72 61 64 2d 63 76 2d 74 65 73 74 65 73 2e 66 63 63 6e 2e 70 74 EAP-PEAP: received Phase 2: code=1 identifier=1 length=47 EAP-PEAP: Phase 2 Request: type=26 EAP-PEAP: Selected Phase 2 EAP vendor 0 method 26 EAP-MSCHAPV2: RX identifier 1 mschapv2_id 1 EAP-MSCHAPV2: Received challenge EAP-MSCHAPV2: Authentication Servername - hexdump_ascii(len=21): 72 61 64 2d 63 76 2d 74 65 73 74 65 73 2e 66 63 rad-cv-testes.fc 63 6e 2e 70 74 cn.pt EAP-MSCHAPV2: Generating Challenge Response MSCHAPV2: Identity - hexdump_ascii(len=18): 69 73 63 74 65 40 72 6f 61 6d 2e 66 63 63 6e 2e iscte(a)roam.fccn. 70 74 pt MSCHAPV2: Username - hexdump_ascii(len=18): 69 73 63 74 65 40 72 6f 61 6d 2e 66 63 63 6e 2e iscte(a)roam.fccn. 70 74 pt MSCHAPV2: auth_challenge - hexdump(len=16): 98 20 2f 14 94 b5 56 d5 c0 12 dc cc 88 df 09 eb MSCHAPV2: peer_challenge - hexdump(len=16): 0f 8e 0a f4 55 31 35 02 5f ae ad 9c e5 80 18 9c MSCHAPV2: username - hexdump_ascii(len=18): 69 73 63 74 65 40 72 6f 61 6d 2e 66 63 63 6e 2e iscte(a)roam.fccn. 70 74 pt MSCHAPV2: password - hexdump_ascii(len=9): 72 30 61 6d 31 73 63 74 33 xxxxxxxx MSCHAPV2: NT Response - hexdump(len=24): cc d4 11 73 9e 23 ce 86 3a 44 bb c9 88 55 33 e5 95 94 81 3f cd 30 be 16 MSCHAPV2: Auth Response - hexdump(len=20): d9 ff 32 e7 61 1a f9 d4 0b ed a5 60 ed b2 ac 43 9c 58 4f 94 MSCHAPV2: Master Key - hexdump(len=16): ab b4 d5 57 32 57 f2 f2 42 b0 1a 13 20 27 fc e8 EAP-MSCHAPV2: TX identifier 1 mschapv2_id 1 (response) EAP-PEAP: Encrypting Phase 2 data - hexdump(len=77): 02 01 00 4d 1a 02 01 00 48 31 0f 8e 0a f4 55 31 35 02 5f ae ad 9c e5 80 18 9c 00 00 00 00 00 00 00 00 cc d4 11 73 9e 23 ce 86 3a 44 bb c9 88 55 33 e5 95 94 81 3f cd 30 be 16 00 69 73 63 74 65 40 72 6f 61 6d 2e 66 63 63 6e 2e 70 74 SSL: 154 bytes left to be sent out (of total 154 bytes) EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL EAP: EAP entering state SEND_RESPONSE EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RESPONSE EAPOL: txSuppRsp WPA: eapol_test_eapol_send(type=0 len=160) TX EAP -> RADIUS - hexdump(len=160): 02 06 00 a0 19 01 17 03 01 00 20 c2 6f 7a 73 72 5d f8 64 d5 b8 0e 51 de 31 4c 98 0b db 15 5a 80 ea ee 9e b7 2a 47 fd fd 18 68 d7 17 03 01 00 70 2c c2 d6 6f 3e e6 ca 76 15 50 67 98 32 7d 38 86 29 09 26 0b 34 7e 3b 78 db d6 f3 6f 78 23 4a df 34 7d 23 57 b9 fe f6 8f ea e8 9b 28 bb d8 52 a2 92 1d cc 9a 14 df b9 a0 a2 9c 59 b9 60 d6 b1 3d 83 1e 3b db bb 70 df 7b ef 3d 06 0c ec 48 67 c1 24 68 8f 40 ec 46 19 0d 2d da c1 01 f0 be c8 83 78 02 ac e1 37 38 d2 49 bb 17 d8 be 7b de 15 28 Encapsulating EAP message into a RADIUS packet Sending RADIUS message to authentication server RADIUS message: code=1 (Access-Request) identifier=6 length=281 Attribute 1 (User-Name) length=20 Value: 'iscte(a)roam.fccn.pt' Attribute 4 (NAS-IP-Address) length=6 Value: 127.0.0.1 Attribute 31 (Calling-Station-Id) length=19 Value: '02-00-00-00-00-01' Attribute 12 (Framed-MTU) length=6 Value: 1400 Attribute 61 (NAS-Port-Type) length=6 Value: 19 Attribute 77 (Connect-Info) length=24 Value: 'CONNECT 11Mbps 802.11b' Attribute 79 (EAP-Message) length=162 Value: 02 06 00 a0 19 01 17 03 01 00 20 c2 6f 7a 73 72 5d f8 64 d5 b8 0e 51 de 31 4c 98 0b db 15 5a 80 ea ee 9e b7 2a 47 fd fd 18 68 d7 17 03 01 00 70 2c c2 d6 6f 3e e6 ca 76 15 50 67 98 32 7d 38 86 29 09 26 0b 34 7e 3b 78 db d6 f3 6f 78 23 4a df 34 7d 23 57 b9 fe f6 8f ea e8 9b 28 bb d8 52 a2 92 1d cc 9a 14 df b9 a0 a2 9c 59 b9 60 d6 b1 3d 83 1e 3b db bb 70 df 7b ef 3d 06 0c ec 48 67 c1 24 68 8f 40 ec 46 19 0d 2d da c1 01 f0 be c8 83 78 02 ac e1 37 38 d2 49 bb 17 d8 be 7b de 15 28 Attribute 80 (Message-Authenticator) length=18 Value: 86 77 d9 31 f7 ec dd 73 aa 83 1e 2e d1 6c 70 27 Next RADIUS client retransmit in 3 seconds EAPOL: SUPP_BE entering state RECEIVE Received 147 bytes from RADIUS server Received RADIUS message RADIUS message: code=11 (Access-Challenge) identifier=6 length=147 Attribute 79 (EAP-Message) length=109 Value: 01 07 00 6b 19 01 17 03 01 00 60 ae fd e3 9e 5c dd 3b 31 86 ec 76 d8 ea a8 d0 e5 f7 9a f7 6e 58 61 20 48 60 a5 bf 5b ef bd ca b2 e7 de 66 31 49 3a 3a d1 ee e9 ab 01 67 72 5c 0d 03 cf 59 c1 ed 8f 69 21 63 00 c7 19 60 b7 4b 64 2f fd 89 61 81 5f 57 8e b9 fa 59 41 ff 7c 09 01 c4 51 11 62 dd 81 5e f3 57 d1 c3 b3 05 a9 09 be Attribute 80 (Message-Authenticator) length=18 Value: 21 f5 36 e6 26 05 7c 36 4a 58 96 ad 96 bd 9e 12 STA 02:00:00:00:00:01: Received RADIUS packet matched with a pending request, round trip time 0.08 sec RADIUS packet matching with station decapsulated EAP packet (code=1 id=7 len=107) from RADIUS server: EAP-Request-PEAP (25) EAPOL: Received EAP-Packet frame EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Request id=7 method=25 vendor=0 vendorMethod=0 EAP: EAP entering state METHOD SSL: Received packet(len=107) - Flags 0x01 EAP-PEAP: received 101 bytes encrypted data for Phase 2 EAP-PEAP: Decrypted Phase 2 EAP - hexdump(len=61): 01 02 00 3d 1a 03 01 00 38 53 3d 44 39 46 46 33 32 45 37 36 31 31 41 46 39 44 34 30 42 45 44 41 35 36 30 45 44 42 32 41 43 34 33 39 43 35 38 34 46 39 34 20 4d 3d 73 75 63 63 65 73 73 EAP-PEAP: received Phase 2: code=1 identifier=2 length=61 EAP-PEAP: Phase 2 Request: type=26 EAP-MSCHAPV2: RX identifier 2 mschapv2_id 1 EAP-MSCHAPV2: Received success EAP-MSCHAPV2: Success message - hexdump_ascii(len=9): 4d 3d 73 75 63 63 65 73 73 M=success EAP-MSCHAPV2: Authentication succeeded EAP-PEAP: Encrypting Phase 2 data - hexdump(len=6): 02 02 00 06 1a 03 SSL: 74 bytes left to be sent out (of total 74 bytes) EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL EAP: EAP entering state SEND_RESPONSE EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RESPONSE EAPOL: txSuppRsp WPA: eapol_test_eapol_send(type=0 len=80) TX EAP -> RADIUS - hexdump(len=80): 02 07 00 50 19 01 17 03 01 00 20 5e c8 6f 50 06 1b 70 cd a3 3e 35 15 6c 11 7a 5e 33 c5 7c fd e5 8b 3e 69 f7 e4 5c 25 60 8a 93 de 17 03 01 00 20 a0 fb ce 5c 33 f0 04 95 c8 1c 3d 55 d7 64 b7 54 c0 57 c0 05 92 4a e8 08 f5 19 24 45 d9 ac 1b 38 Encapsulating EAP message into a RADIUS packet Sending RADIUS message to authentication server RADIUS message: code=1 (Access-Request) identifier=7 length=201 Attribute 1 (User-Name) length=20 Value: 'iscte(a)roam.fccn.pt' Attribute 4 (NAS-IP-Address) length=6 Value: 127.0.0.1 Attribute 31 (Calling-Station-Id) length=19 Value: '02-00-00-00-00-01' Attribute 12 (Framed-MTU) length=6 Value: 1400 Attribute 61 (NAS-Port-Type) length=6 Value: 19 Attribute 77 (Connect-Info) length=24 Value: 'CONNECT 11Mbps 802.11b' Attribute 79 (EAP-Message) length=82 Value: 02 07 00 50 19 01 17 03 01 00 20 5e c8 6f 50 06 1b 70 cd a3 3e 35 15 6c 11 7a 5e 33 c5 7c fd e5 8b 3e 69 f7 e4 5c 25 60 8a 93 de 17 03 01 00 20 a0 fb ce 5c 33 f0 04 95 c8 1c 3d 55 d7 64 b7 54 c0 57 c0 05 92 4a e8 08 f5 19 24 45 d9 ac 1b 38 Attribute 80 (Message-Authenticator) length=18 Value: ec 20 4b 31 88 04 44 92 f6 14 da f8 2e 49 7c 8e Next RADIUS client retransmit in 3 seconds EAPOL: SUPP_BE entering state RECEIVE Received 83 bytes from RADIUS server Received RADIUS message RADIUS message: code=11 (Access-Challenge) identifier=7 length=83 Attribute 79 (EAP-Message) length=45 Value: 01 08 00 2b 19 01 17 03 01 00 20 f4 80 cb 7c 9b 7b 52 c1 c8 1d b2 ce fd cc 8b b7 37 ad a5 86 04 db b5 ad ed f2 3a 93 fe 48 7b 11 Attribute 80 (Message-Authenticator) length=18 Value: 30 50 52 80 65 07 9c 63 55 6e ea 2d 85 8f 05 8e STA 02:00:00:00:00:01: Received RADIUS packet matched with a pending request, round trip time 0.06 sec RADIUS packet matching with station decapsulated EAP packet (code=1 id=8 len=43) from RADIUS server: EAP-Request-PEAP (25) EAPOL: Received EAP-Packet frame EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Request id=8 method=25 vendor=0 vendorMethod=0 EAP: EAP entering state METHOD SSL: Received packet(len=43) - Flags 0x01 EAP-PEAP: received 37 bytes encrypted data for Phase 2 EAP-PEAP: Decrypted Phase 2 EAP - hexdump(len=11): 01 08 00 0b 21 80 03 00 02 00 01 EAP-PEAP: received Phase 2: code=1 identifier=8 length=11 EAP-PEAP: Phase 2 Request: type=33 EAP-TLV: Received TLVs - hexdump(len=6): 80 03 00 02 00 01 EAP-TLV: Result TLV - hexdump(len=2): 00 01 EAP-TLV: TLV Result - Success - EAP-TLV/Phase2 Completed EAP-PEAP: Encrypting Phase 2 data - hexdump(len=11): 02 08 00 0b 21 80 03 00 02 00 01 SSL: 74 bytes left to be sent out (of total 74 bytes) EAP: method process -> ignore=FALSE methodState=DONE decision=UNCOND_SUCC EAP: EAP entering state SEND_RESPONSE EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RESPONSE EAPOL: txSuppRsp WPA: eapol_test_eapol_send(type=0 len=80) TX EAP -> RADIUS - hexdump(len=80): 02 08 00 50 19 01 17 03 01 00 20 83 65 79 c5 60 67 65 82 9d 19 63 b0 34 5e 3f 5e 84 6b bd af 7b fb 66 44 c4 e8 10 5e a8 18 62 5c 17 03 01 00 20 14 a9 d2 aa 5a f2 7e 8f 9c 2a 10 9d a9 ff 19 01 90 db 4e b0 c3 69 f1 8a ac 6e d8 57 a4 83 1a a7 Encapsulating EAP message into a RADIUS packet Sending RADIUS message to authentication server RADIUS message: code=1 (Access-Request) identifier=8 length=201 Attribute 1 (User-Name) length=20 Value: 'iscte(a)roam.fccn.pt' Attribute 4 (NAS-IP-Address) length=6 Value: 127.0.0.1 Attribute 31 (Calling-Station-Id) length=19 Value: '02-00-00-00-00-01' Attribute 12 (Framed-MTU) length=6 Value: 1400 Attribute 61 (NAS-Port-Type) length=6 Value: 19 Attribute 77 (Connect-Info) length=24 Value: 'CONNECT 11Mbps 802.11b' Attribute 79 (EAP-Message) length=82 Value: 02 08 00 50 19 01 17 03 01 00 20 83 65 79 c5 60 67 65 82 9d 19 63 b0 34 5e 3f 5e 84 6b bd af 7b fb 66 44 c4 e8 10 5e a8 18 62 5c 17 03 01 00 20 14 a9 d2 aa 5a f2 7e 8f 9c 2a 10 9d a9 ff 19 01 90 db 4e b0 c3 69 f1 8a ac 6e d8 57 a4 83 1a a7 Attribute 80 (Message-Authenticator) length=18 Value: 2f db bf 8d 3f 07 fd 8a 21 e6 a5 10 25 31 af 43 Next RADIUS client retransmit in 3 seconds EAPOL: SUPP_BE entering state RECEIVE Received 180 bytes from RADIUS server Received RADIUS message RADIUS message: code=2 (Access-Accept) identifier=8 length=180 Attribute 79 (EAP-Message) length=6 Value: 03 08 00 04 Attribute 80 (Message-Authenticator) length=18 Value: 24 b5 20 6c e8 0f e1 3f 56 82 bb ce 26 f2 54 d2 Attribute 1 (User-Name) length=20 Value: 'iscte(a)roam.fccn.pt' Attribute 26 (Vendor-Specific) length=58 Value: 00 00 01 37 10 34 80 75 a6 7d 39 0e 6d eb 0d dd c6 f8 d6 37 d3 27 95 f6 21 d9 1c 5a 28 94 a9 70 d0 48 b2 08 9a 6a 69 79 63 7c 0f 6b 11 9a 07 39 78 ab a0 c8 08 82 4a fc Attribute 26 (Vendor-Specific) length=58 Value: 00 00 01 37 11 34 8d 18 62 8a 92 c9 d6 f9 31 5c 70 1e 82 24 ee e0 a3 b4 ea 12 aa c5 98 08 43 23 b1 95 f7 8e f6 2c 9b 50 7c f8 02 76 c3 84 98 4b 7d 4b 46 37 2f 3f a7 d6 STA 02:00:00:00:00:01: Received RADIUS packet matched with a pending request, round trip time 0.05 sec RADIUS packet matching with station MS-MPPE-Send-Key (sign) - hexdump(len=32): fe 03 b8 a7 4c c7 a2 64 85 b4 ef 6d d8 ef d9 58 b3 eb 6c f6 0f 2c c7 25 38 0e c3 24 8b 72 0a ef MS-MPPE-Recv-Key (crypt) - hexdump(len=32): e7 aa d7 72 cb 0f ab 27 8c 9a 9a 46 6f 50 2d d4 b8 e1 83 3c 9b 11 66 a4 c5 fe 14 52 84 f2 ad 48 decapsulated EAP packet (code=3 id=8 len=4) from RADIUS server: EAP Success EAPOL: Received EAP-Packet frame EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Success EAP: EAP entering state SUCCESS CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully EAPOL: IEEE 802.1X for plaintext connection; no EAPOL-Key frames required WPA: EAPOL processing complete EAPOL: SUPP_PAE entering state AUTHENTICATED EAPOL: SUPP_BE entering state RECEIVE EAPOL: SUPP_BE entering state SUCCESS EAPOL: SUPP_BE entering state IDLE eapol_sm_cb: success=1 EAPOL: Successfully fetched key (len=32) PMK from EAPOL - hexdump(len=32): b5 3a 8c 7f 8f 17 d1 1b a8 b8 a1 3d ca fa ba 06 85 9b ad f5 82 7d 23 76 dd 6a 43 ba 9c 1c ec 78 WARNING: PMK mismatch PMK from AS - hexdump(len=32): e7 aa d7 72 cb 0f ab 27 8c 9a 9a 46 6f 50 2d d4 b8 e1 83 3c 9b 11 66 a4 c5 fe 14 52 84 f2 ad 48 EAP: deinitialize previously used EAP method (25, PEAP) at EAP deinit ENGINE: engine deinit MPPE keys OK: 0 mismatch: 1 FAILURE FREERADIUS -X LOGS ……………………………. radius2:~# freeradius -X FreeRADIUS Version 2.1.10, for host i486-pc-linux-gnu, built on Nov 14 2010 at 20:41:03 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/f_ticks including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/opendirectory including configuration file /etc/freeradius/modules/dynamic_clients including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/status including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 256000 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = yes } security { max_attributes = 200 reject_delay = 0 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 1 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } realm iscte.pt { authhost = LOCAL accthost = LOCAL } realm teste.iscte.pt { authhost = LOCAL accthost = LOCAL } realm ~.*\.iscte\.intranet { } realm ~.*\.iul\.intra { } realm ~.*\.iscte\.pt { } realm NULL { } realm DEFAULT { nostrip ldflag = round_robin authhost = 193.136.192.43:1812 accthost = 193.136.192.43:1813 secret = testeradiusfccn2 } realm DEFAULT { ldflag = round_robin authhost = 193.136.192.44:1812 accthost = 193.136.192.44:1813 secret = testeradiusfccn2 } # realm DEFAULT radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "xxxxxxxxx" nastype = "other" } client 193.136.188.36 { ipaddr = 193.136.188.36 netmask = 32 require_message_authenticator = no secret = "xxxxxxxx" nastype = "other" } client 10.10.66.18/32 { ipaddr = 10.10.66.18 netmask = 32 require_message_authenticator = no secret = "wdsiscte" shortname = "nut" nastype = "other" } client 10.10.65.0/24 { require_message_authenticator = no secret = "xxxxxxxx" shortname = "rede1_aps" nastype = "cisco" } client 10.10.66.0/24 { require_message_authenticator = no secret = "xxxxxxxxx" shortname = "rede2_aps" nastype = "cisco" } client 10.10.32.35/32 { require_message_authenticator = no secret = "xxxxxxxxxxx" shortname = "syslog" nastype = "other" } client 193.136.192.43 { require_message_authenticator = no secret = "xxxxxxxxx" shortname = "proxyNacional1" } client 193.136.192.44 { require_message_authenticator = no secret = "xxxxxxxxxx" shortname = "proxyNacional2" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server status { # from file /etc/freeradius/sites-enabled/status modules { Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_always Module: Instantiating module "ok" from file /etc/freeradius/modules/always always ok { rcode = "ok" simulcount = 0 mpp = no } } # modules } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = yes require_encryption = yes require_strong = yes with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{User-Name:-None}} --challenge=%{mschap:Challenge:-00} --domain=IUL --nt-response=%{mschap:NT-Response:-00}" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "mschap" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "xxxxxxxxxx" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" cache { enable = no lifetime = 24 max_entries = 255 } verify { } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = no include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/modules/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } [/etc/freeradius/users]:6 WARNING! Check item "Stripped-User-Name" found in reply item list for user "DEFAULT". This attribute MUST go on the first line with the other check items [/etc/freeradius/users]:35 WARNING! Changing 'Reply-Message =' to 'Reply-Message ==' for comparing RADIUS attribute in check item list for user DEFAULT Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking pre-proxy {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "reply_log" from file /etc/freeradius/modules/detail.log detail reply_log { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_ldap Module: Instantiating module "ldap" from file /etc/freeradius/modules/ldap ldap { server = "10.10.32.14" port = 389 password = "xxxxxxxx" identity = "CN=xxxxxxxx,CN=Users,DC=xxxxx,DC=xxxxx" net_timeout = 10 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "cn=Users,dc=wiscte,dc=wfarm" filter = "(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes rebind = yes groupname_attribute = "sAMAccountName" groupmembership_filter = "(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})" groupmembership_attribute = "memberOf" dictionary_mapping = "/etc/freeradius/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes edir_account_policy_check = no set_auth_type = no } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/freeradius/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x8f50208 Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /etc/freeradius/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Instantiating module "auth_log" from file /etc/freeradius/modules/detail.log detail auth_log { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Checking preacct {...} for more modules to load Module: Checking accounting {...} for more modules to load Module: Instantiating module "detail" from file /etc/freeradius/modules/detail detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_counter Module: Instantiating module "daily" from file /etc/freeradius/modules/counter counter daily { filename = "/etc/freeradius/db.daily" key = "User-Name" reset = "daily" count-attribute = "Acct-Session-Time" counter-name = "Daily-Session-Time" check-name = "Max-Daily-Session" reply-name = "Session-Timeout" allowed-servicetype = "Framed-User" cache-size = 5000 } rlm_counter: Counter attribute Daily-Session-Time is number 11276 rlm_counter: Current Time: 1326816675 [2012-01-17 16:11:15], Next reset 1326844800 [2012-01-18 00:00:00] Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Instantiating module "sradutmp" from file /etc/freeradius/modules/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 420 callerid = no } Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking pre-proxy {...} for more modules to load Module: Instantiating module "pre_proxy_log" from file /etc/freeradius/modules/detail.log detail pre_proxy_log { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/pre-proxy-detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.pre-proxy { attrsfile = "/etc/freeradius/attrs.pre-proxy" key = "%{Realm}" } Module: Checking post-proxy {...} for more modules to load Module: Instantiating module "post_proxy_log" from file /etc/freeradius/modules/detail.log detail post_proxy_log { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/post-proxy-detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.post-proxy { attrsfile = "/etc/freeradius/attrs" key = "%{Realm}" } Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_linelog Module: Instantiating module "f_ticks" from file /etc/freeradius/modules/f_ticks linelog f_ticks { filename = "syslog" format = "" reference = "f_ticks.%{%{reply:Packet-Type}:-format}" } } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 193.136.188.36 port = 0 } listen { type = "acct" ipaddr = 193.136.188.36 port = 0 } listen { type = "status" ipaddr = * port = 18120 client admin { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "xxxxxxxxxx" } client admin2 { ipaddr = 193.136.188.36 require_message_authenticator = no secret = "xxxxxxxxx" } client syslog { ipaddr = 10.10.32.35 require_message_authenticator = no secret = "xxxxxxxxx" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 1812 } listen { type = "acct" ipaddr = 127.0.0.1 port = 1813 } Listening on authentication address 193.136.188.36 port 1812 Listening on accounting interface eth0 address 193.136.188.36 port 1813 Listening on status address * port 18120 as server status Listening on authentication address 127.0.0.1 port 1812 as server inner-tunnel Listening on accounting address 127.0.0.1 port 1813 as server inner-tunnel Listening on proxy address 193.136.188.36 port 1814 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 28963, id=0, length=144 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0200001701697363746540726f616d2e6663636e2e7074 Message-Authenticator = 0x6a6b09f3d6fe4619273d6c528be4d7d8 server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "roam.fccn.pt" for User-Name = "iscte(a)roam.fccn.pt" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user iscte to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] returns updated ++[control] returns updated [eap] Request is supposed to be proxied to Realm LOCAL. Not doing EAP. ++[eap] returns noop [files] expand: %{Realm} -> DEFAULT [files] expand: %{Realm} -> DEFAULT [files] expand: %{Realm} -> DEFAULT ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop } # server inner-tunnel # Executing section pre-proxy from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group pre-proxy {...} ++[files] returns noop Sending Access-Request of id 102 to 193.136.192.44 port 1812 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0200001701697363746540726f616d2e6663636e2e7074 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x30 Proxying request 0 to home server 193.136.192.44 port 1812 Sending Access-Request of id 102 to 193.136.192.44 port 1812 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0200001701697363746540726f616d2e6663636e2e7074 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x30 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host 193.136.192.44 port 1812, id=102, length=49 EAP-Message = 0x010100061921 Message-Authenticator = 0x9d3192b332a0c590e6d83c3b4e3380bf Proxy-State = 0x30 # Executing section post-proxy from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group post-proxy {...} [eap] No pre-existing handler found ++[eap] returns noop server inner-tunnel { } # server inner-tunnel Sending Access-Challenge of id 0 to 127.0.0.1 port 28963 EAP-Message = 0x010100061921 Message-Authenticator = 0x00000000000000000000000000000000 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 28963, id=1, length=222 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020100651901160301005a0100005603014f159da5c5f673f87601d3a8bcf8c49cc6c66b00f2e8649e61c6ca79f8c240d600002800390038003500160013000a00330032002f000500040015001200090014001100080006000300ff020100000400230000 Message-Authenticator = 0xf0b0e81c6c14d75f5c8f09b2d1971143 server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "roam.fccn.pt" for User-Name = "iscte(a)roam.fccn.pt" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user iscte to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] returns updated ++[control] returns updated [eap] Request is supposed to be proxied to Realm LOCAL. Not doing EAP. ++[eap] returns noop [files] expand: %{Realm} -> DEFAULT [files] expand: %{Realm} -> DEFAULT [files] expand: %{Realm} -> DEFAULT ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop } # server inner-tunnel # Executing section pre-proxy from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group pre-proxy {...} ++[files] returns noop Sending Access-Request of id 88 to 193.136.192.44 port 1812 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020100651901160301005a0100005603014f159da5c5f673f87601d3a8bcf8c49cc6c66b00f2e8649e61c6ca79f8c240d600002800390038003500160013000a00330032002f000500040015001200090014001100080006000300ff020100000400230000 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x31 Proxying request 1 to home server 193.136.192.44 port 1812 Sending Access-Request of id 88 to 193.136.192.44 port 1812 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020100651901160301005a0100005603014f159da5c5f673f87601d3a8bcf8c49cc6c66b00f2e8649e61c6ca79f8c240d600002800390038003500160013000a00330032002f000500040015001200090014001100080006000300ff020100000400230000 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x31 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host 193.136.192.44 port 1812, id=88, length=1059 EAP-Message = 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 EAP-Message = 0x310b3009060355040613025054311e301c06092a864886f70d010901160f7073696d6f6573406663636e2e7074310d300b060355040a13044643434e31143012060355040b130b54656c656d617469636f7330820122300d06092a864886f70d01010105000382010f003082010a02820101009c3e40c696ba2d597354f1dcafac4b6fc97bdd38cd228f08b5a1f893598759e54e9450b8c4062172fe5fdc3bd1d8a4fef200944296214cae2544d7bc9a552f468a32caf7a730b063df202bc0a0eff27dd8dd24ec2a4b212ba9f7d2a601170c43fce341ad68912b827d414c5ebe05db1b1fcead3d68aabbe4bcfa4a60a2d836e4105e8732dffc7784e5c0 EAP-Message = 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 EAP-Message = 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 Message-Authenticator = 0xeae477a143ccf9b691e2096ea5103711 Proxy-State = 0x31 # Executing section post-proxy from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group post-proxy {...} [eap] No pre-existing handler found ++[eap] returns noop server inner-tunnel { } # server inner-tunnel Sending Access-Challenge of id 1 to 127.0.0.1 port 28963 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 Message-Authenticator = 0x00000000000000000000000000000000 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 28963, id=2, length=127 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020200061901 Message-Authenticator = 0x6b8c7eb690e5568ffb63dfc35a6b758e server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "roam.fccn.pt" for User-Name = "iscte(a)roam.fccn.pt" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user iscte to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] returns updated ++[control] returns updated [eap] Request is supposed to be proxied to Realm LOCAL. Not doing EAP. ++[eap] returns noop [files] expand: %{Realm} -> DEFAULT [files] expand: %{Realm} -> DEFAULT [files] expand: %{Realm} -> DEFAULT ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop } # server inner-tunnel # Executing section pre-proxy from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group pre-proxy {...} ++[files] returns noop Sending Access-Request of id 52 to 193.136.192.43 port 1812 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020200061901 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x32 Proxying request 2 to home server 193.136.192.43 port 1812 Sending Access-Request of id 52 to 193.136.192.43 port 1812 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020200061901 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x32 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host 193.136.192.43 port 1812, id=52, length=712 EAP-Message = 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 EAP-Message = 0xdbbaf40897fa98fed6868c4078f34948d7c397249511e2ddaf1f0cb03f13e8511da742fb4616ac9fad9b9e613b05e2509cfda212b49643c993c05fc1dbe5b523d0b4b33ba3deb600d0f8f6cbcf32e41263b81707d92e5e8071cd1859f27c094d67ebbe6e3c079f750203010001a310300e300c0603551d13040530030101ff300d06092a864886f70d01010405000382010100113b6fb8cb0a394278f35a5d118cb987707800080a3633a4d0658d86f000e46a7eaad5136afecb910f5d6517fe36878c5f81248f388561db0f027eb21c26037baf28412a0885fffc8ed64d927b9df26ac39f0002bb067335631061475f642e66a3366af14ca9559737c0 EAP-Message = 0xa27462412ca6e60674a1b0c4c8d0d478a3b4552684974693fbad3870bfef259ad1ab683d6d50fa354e14025bb381e22fa72649dc33fa76dc12526e469efe39df0c24aef596a8464b3e5ab1476744b5fbeb6c427d663f8eb1bc10499b1db428b77c590a00a1e9f085c5a7db25f6521e8c93939b25f7d8ff90024e93fdc04a565483763e7860b35956a6810875c451b36dcb40e5c01c5a16030100040e000000 Message-Authenticator = 0xd1399986b0591af190302a3c02203cab Proxy-State = 0x32 # Executing section post-proxy from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group post-proxy {...} [eap] No pre-existing handler found ++[eap] returns noop server inner-tunnel { } # server inner-tunnel Sending Access-Challenge of id 2 to 127.0.0.1 port 28963 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xa27462412ca6e60674a1b0c4c8d0d478a3b4552684974693fbad3870bfef259ad1ab683d6d50fa354e14025bb381e22fa72649dc33fa76dc12526e469efe39df0c24aef596a8464b3e5ab1476744b5fbeb6c427d663f8eb1bc10499b1db428b77c590a00a1e9f085c5a7db25f6521e8c93939b25f7d8ff90024e93fdc04a565483763e7860b35956a6810875c451b36dcb40e5c01c5a16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 Finished request 2. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 28963, id=3, length=455 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 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 EAP-Message = 0x46859165fb8be376bdff84d86de2ddcd05fa869c1403010001011603010030cd1e4a5d456d24e450551fe6e203c97379422798fd4b448b997edbcaefe1229bbb6fae9afb2a434c57dc4dc09453d98e Message-Authenticator = 0xb91fdaaf6406b0733b7f91e9483ee657 server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "roam.fccn.pt" for User-Name = "iscte(a)roam.fccn.pt" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user iscte to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] returns updated ++[control] returns updated [eap] Request is supposed to be proxied to Realm LOCAL. Not doing EAP. ++[eap] returns noop [files] expand: %{Realm} -> DEFAULT [files] expand: %{Realm} -> DEFAULT [files] expand: %{Realm} -> DEFAULT ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop } # server inner-tunnel # Executing section pre-proxy from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group pre-proxy {...} ++[files] returns noop Sending Access-Request of id 153 to 193.136.192.44 port 1812 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 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 EAP-Message = 0x46859165fb8be376bdff84d86de2ddcd05fa869c1403010001011603010030cd1e4a5d456d24e450551fe6e203c97379422798fd4b448b997edbcaefe1229bbb6fae9afb2a434c57dc4dc09453d98e Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x33 Proxying request 3 to home server 193.136.192.44 port 1812 Sending Access-Request of id 153 to 193.136.192.44 port 1812 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 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 EAP-Message = 0x46859165fb8be376bdff84d86de2ddcd05fa869c1403010001011603010030cd1e4a5d456d24e450551fe6e203c97379422798fd4b448b997edbcaefe1229bbb6fae9afb2a434c57dc4dc09453d98e Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x33 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host 193.136.192.44 port 1812, id=153, length=112 EAP-Message = 0x0104004519810000003b1403010001011603010030e276e3efcdbf27379facdda93378d6b58b0672007a0effdce0790f2f37ac3dd9a810e34b17932a3528a437c33fda12c5 Message-Authenticator = 0x37c8aa8ca78cbde6982e905ea1ba80d0 Proxy-State = 0x33 # Executing section post-proxy from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group post-proxy {...} [eap] No pre-existing handler found ++[eap] returns noop server inner-tunnel { } # server inner-tunnel Sending Access-Challenge of id 3 to 127.0.0.1 port 28963 EAP-Message = 0x0104004519810000003b1403010001011603010030e276e3efcdbf27379facdda93378d6b58b0672007a0effdce0790f2f37ac3dd9a810e34b17932a3528a437c33fda12c5 Message-Authenticator = 0x00000000000000000000000000000000 Finished request 3. Going to the next request Waking up in 4.7 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 28963, id=4, length=127 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020400061901 Message-Authenticator = 0xb9a89ddd12bdaef0a7705a26e2649dc4 server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "roam.fccn.pt" for User-Name = "iscte(a)roam.fccn.pt" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user iscte to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] returns updated ++[control] returns updated [eap] Request is supposed to be proxied to Realm LOCAL. Not doing EAP. ++[eap] returns noop [files] expand: %{Realm} -> DEFAULT [files] expand: %{Realm} -> DEFAULT [files] expand: %{Realm} -> DEFAULT ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop } # server inner-tunnel # Executing section pre-proxy from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group pre-proxy {...} ++[files] returns noop Sending Access-Request of id 43 to 193.136.192.43 port 1812 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020400061901 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x34 Proxying request 4 to home server 193.136.192.43 port 1812 Sending Access-Request of id 43 to 193.136.192.43 port 1812 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020400061901 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x34 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host 193.136.192.43 port 1812, id=43, length=86 EAP-Message = 0x0105002b19011703010020d2ab6c4963f5003abfbfd7fe09fb32f9455fef30c369aa7c25936fbfd3bd093a Message-Authenticator = 0x410568e4497fe7939e091ac47ed1ed0e Proxy-State = 0x34 # Executing section post-proxy from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group post-proxy {...} [eap] No pre-existing handler found ++[eap] returns noop server inner-tunnel { } # server inner-tunnel Sending Access-Challenge of id 4 to 127.0.0.1 port 28963 EAP-Message = 0x0105002b19011703010020d2ab6c4963f5003abfbfd7fe09fb32f9455fef30c369aa7c25936fbfd3bd093a Message-Authenticator = 0x00000000000000000000000000000000 Finished request 4. Going to the next request Waking up in 4.6 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 28963, id=5, length=217 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x02050060190117030100206186fa5a58252e3a08613eb2b595c3f530fa6e4f31ea49b3815996afe340697b1703010030fabdef3c38483faa0b2a9e07b89ca9b03331906746a4ad8ddd4a894c645704cd5663e1dc6a262c5f04a3b7e3717cc481 Message-Authenticator = 0x114a60a456bc8f75e7c3238857baead7 server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "roam.fccn.pt" for User-Name = "iscte(a)roam.fccn.pt" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user iscte to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] returns updated ++[control] returns updated [eap] Request is supposed to be proxied to Realm LOCAL. Not doing EAP. ++[eap] returns noop [files] expand: %{Realm} -> DEFAULT [files] expand: %{Realm} -> DEFAULT [files] expand: %{Realm} -> DEFAULT ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop } # server inner-tunnel # Executing section pre-proxy from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group pre-proxy {...} ++[files] returns noop Sending Access-Request of id 56 to 193.136.192.43 port 1812 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x02050060190117030100206186fa5a58252e3a08613eb2b595c3f530fa6e4f31ea49b3815996afe340697b1703010030fabdef3c38483faa0b2a9e07b89ca9b03331906746a4ad8ddd4a894c645704cd5663e1dc6a262c5f04a3b7e3717cc481 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x35 Proxying request 5 to home server 193.136.192.43 port 1812 Sending Access-Request of id 56 to 193.136.192.43 port 1812 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x02050060190117030100206186fa5a58252e3a08613eb2b595c3f530fa6e4f31ea49b3815996afe340697b1703010030fabdef3c38483faa0b2a9e07b89ca9b03331906746a4ad8ddd4a894c645704cd5663e1dc6a262c5f04a3b7e3717cc481 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x35 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host 193.136.192.43 port 1812, id=56, length=134 EAP-Message = 0x0106005b19011703010050b8e4193b90e3a5c7320fa8d415dd4d7b47a3840acf4ad702455dc948186eff4d1c58ce6ace9dbba27cde8720992cc868e7e731d0989247d9a88a88e65f591d5e2ca5e5ae0c6147e6eebfaae8ddbdd349 Message-Authenticator = 0x68749e4c5e76f8af20c589c4cd89f1e3 Proxy-State = 0x35 # Executing section post-proxy from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group post-proxy {...} [eap] No pre-existing handler found ++[eap] returns noop server inner-tunnel { } # server inner-tunnel Sending Access-Challenge of id 5 to 127.0.0.1 port 28963 EAP-Message = 0x0106005b19011703010050b8e4193b90e3a5c7320fa8d415dd4d7b47a3840acf4ad702455dc948186eff4d1c58ce6ace9dbba27cde8720992cc868e7e731d0989247d9a88a88e65f591d5e2ca5e5ae0c6147e6eebfaae8ddbdd349 Message-Authenticator = 0x00000000000000000000000000000000 Finished request 5. Going to the next request Waking up in 4.6 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 28963, id=6, length=281 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020600a019011703010020c26f7a73725df864d5b80e51de314c980bdb155a80eaee9eb72a47fdfd1868d717030100702cc2d66f3ee6ca7615506798327d38862909260b347e3b78dbd6f36f78234adf347d2357b9fef68feae89b28bbd852a2921dcc9a14dfb9a0a29c59b960d6b13d831e3bdbbb70df7bef3d060cec4867c124688f40ec46190d2ddac101f0bec8837802ace13738d249bb17d8be7bde1528 Message-Authenticator = 0x8677d931f7ecdd73aa831e2ed16c7027 server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "roam.fccn.pt" for User-Name = "iscte(a)roam.fccn.pt" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user iscte to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] returns updated ++[control] returns updated [eap] Request is supposed to be proxied to Realm LOCAL. Not doing EAP. ++[eap] returns noop [files] expand: %{Realm} -> DEFAULT [files] expand: %{Realm} -> DEFAULT [files] expand: %{Realm} -> DEFAULT ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop } # server inner-tunnel # Executing section pre-proxy from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group pre-proxy {...} ++[files] returns noop Sending Access-Request of id 9 to 193.136.192.43 port 1812 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020600a019011703010020c26f7a73725df864d5b80e51de314c980bdb155a80eaee9eb72a47fdfd1868d717030100702cc2d66f3ee6ca7615506798327d38862909260b347e3b78dbd6f36f78234adf347d2357b9fef68feae89b28bbd852a2921dcc9a14dfb9a0a29c59b960d6b13d831e3bdbbb70df7bef3d060cec4867c124688f40ec46190d2ddac101f0bec8837802ace13738d249bb17d8be7bde1528 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x36 Proxying request 6 to home server 193.136.192.43 port 1812 Sending Access-Request of id 9 to 193.136.192.43 port 1812 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020600a019011703010020c26f7a73725df864d5b80e51de314c980bdb155a80eaee9eb72a47fdfd1868d717030100702cc2d66f3ee6ca7615506798327d38862909260b347e3b78dbd6f36f78234adf347d2357b9fef68feae89b28bbd852a2921dcc9a14dfb9a0a29c59b960d6b13d831e3bdbbb70df7bef3d060cec4867c124688f40ec46190d2ddac101f0bec8837802ace13738d249bb17d8be7bde1528 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x36 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host 193.136.192.43 port 1812, id=9, length=150 EAP-Message = 0x0107006b19011703010060aefde39e5cdd3b3186ec76d8eaa8d0e5f79af76e5861204860a5bf5befbdcab2e7de6631493a3ad1eee9ab0167725c0d03cf59c1ed8f69216300c71960b74b642ffd8961815f578eb9fa5941ff7c0901c4511162dd815ef357d1c3b305a909be Message-Authenticator = 0x60351fa43a0b55f031e4eafd0c37dc69 Proxy-State = 0x36 # Executing section post-proxy from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group post-proxy {...} [eap] No pre-existing handler found ++[eap] returns noop server inner-tunnel { } # server inner-tunnel Sending Access-Challenge of id 6 to 127.0.0.1 port 28963 EAP-Message = 0x0107006b19011703010060aefde39e5cdd3b3186ec76d8eaa8d0e5f79af76e5861204860a5bf5befbdcab2e7de6631493a3ad1eee9ab0167725c0d03cf59c1ed8f69216300c71960b74b642ffd8961815f578eb9fa5941ff7c0901c4511162dd815ef357d1c3b305a909be Message-Authenticator = 0x00000000000000000000000000000000 Finished request 6. Going to the next request Waking up in 4.5 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 28963, id=7, length=201 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x02070050190117030100205ec86f50061b70cda33e35156c117a5e33c57cfde58b3e69f7e45c25608a93de1703010020a0fbce5c33f00495c81c3d55d764b754c057c005924ae808f5192445d9ac1b38 Message-Authenticator = 0xec204b3188044492f614daf82e497c8e server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "roam.fccn.pt" for User-Name = "iscte(a)roam.fccn.pt" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user iscte to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] returns updated ++[control] returns updated [eap] Request is supposed to be proxied to Realm LOCAL. Not doing EAP. ++[eap] returns noop [files] expand: %{Realm} -> DEFAULT [files] expand: %{Realm} -> DEFAULT [files] expand: %{Realm} -> DEFAULT ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop } # server inner-tunnel # Executing section pre-proxy from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group pre-proxy {...} ++[files] returns noop Sending Access-Request of id 79 to 193.136.192.44 port 1812 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x02070050190117030100205ec86f50061b70cda33e35156c117a5e33c57cfde58b3e69f7e45c25608a93de1703010020a0fbce5c33f00495c81c3d55d764b754c057c005924ae808f5192445d9ac1b38 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x37 Proxying request 7 to home server 193.136.192.44 port 1812 Sending Access-Request of id 79 to 193.136.192.44 port 1812 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x02070050190117030100205ec86f50061b70cda33e35156c117a5e33c57cfde58b3e69f7e45c25608a93de1703010020a0fbce5c33f00495c81c3d55d764b754c057c005924ae808f5192445d9ac1b38 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x37 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Challenge packet from host 193.136.192.44 port 1812, id=79, length=86 EAP-Message = 0x0108002b19011703010020f480cb7c9b7b52c1c81db2cefdcc8bb737ada58604dbb5adedf23a93fe487b11 Message-Authenticator = 0x9af5db8ede876b1959f0d34034ab8531 Proxy-State = 0x37 # Executing section post-proxy from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group post-proxy {...} [eap] No pre-existing handler found ++[eap] returns noop server inner-tunnel { } # server inner-tunnel Sending Access-Challenge of id 7 to 127.0.0.1 port 28963 EAP-Message = 0x0108002b19011703010020f480cb7c9b7b52c1c81db2cefdcc8bb737ada58604dbb5adedf23a93fe487b11 Message-Authenticator = 0x00000000000000000000000000000000 Finished request 7. Going to the next request Waking up in 4.4 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 28963, id=8, length=201 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0208005019011703010020836579c5606765829d1963b0345e3f5e846bbdaf7bfb6644c4e8105ea818625c170301002014a9d2aa5af27e8f9c2a109da9ff190190db4eb0c369f18aac6ed857a4831aa7 Message-Authenticator = 0x2fdbbf8d3f07fd8a21e6a5102531af43 server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "roam.fccn.pt" for User-Name = "iscte(a)roam.fccn.pt" [suffix] Found realm "DEFAULT" [suffix] Adding Realm = "DEFAULT" [suffix] Proxying request from user iscte to realm DEFAULT [suffix] Preparing to proxy authentication request to realm "DEFAULT" ++[suffix] returns updated ++[control] returns updated [eap] Request is supposed to be proxied to Realm LOCAL. Not doing EAP. ++[eap] returns noop [files] expand: %{Realm} -> DEFAULT [files] expand: %{Realm} -> DEFAULT [files] expand: %{Realm} -> DEFAULT ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop } # server inner-tunnel # Executing section pre-proxy from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group pre-proxy {...} ++[files] returns noop Sending Access-Request of id 172 to 193.136.192.43 port 1812 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0208005019011703010020836579c5606765829d1963b0345e3f5e846bbdaf7bfb6644c4e8105ea818625c170301002014a9d2aa5af27e8f9c2a109da9ff190190db4eb0c369f18aac6ed857a4831aa7 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x38 Proxying request 8 to home server 193.136.192.43 port 1812 Sending Access-Request of id 172 to 193.136.192.43 port 1812 User-Name = "iscte(a)roam.fccn.pt" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0208005019011703010020836579c5606765829d1963b0345e3f5e846bbdaf7bfb6644c4e8105ea818625c170301002014a9d2aa5af27e8f9c2a109da9ff190190db4eb0c369f18aac6ed857a4831aa7 Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x38 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Accept packet from host 193.136.192.43 port 1812, id=172, length=183 EAP-Message = 0x03080004 Message-Authenticator = 0x6edc227038f16b2d8a8ca2bd26310465 User-Name = "iscte(a)roam.fccn.pt" MS-MPPE-Send-Key = 0xfe03b8a74cc7a26485b4ef6dd8efd958b3eb6cf60f2cc725380ec3248b720aef MS-MPPE-Recv-Key = 0xe7aad772cb0fab278c9a9a466f502dd4b8e1833c9b1166a4c5fe145284f2ad48 Proxy-State = 0x38 # Executing section post-proxy from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group post-proxy {...} [eap] No pre-existing handler found ++[eap] returns noop server inner-tunnel { Found Auth-Type = Accept Auth-Type = Accept, accepting the user Login OK: [iscte(a)roam.fccn.pt/<no User-Password attribute>] (from client localhost port 0 cli 02-00-00-00-00-01) # Executing section post-auth from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group post-auth {...} [reply_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d -> /var/log/freeradius/radacct/127.0.0.1/reply-detail-20120117 [reply_log] /var/log/freeradius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d expands to /var/log/freeradius/radacct/127.0.0.1/reply-detail-20120117 [reply_log] expand: %t -> Tue Jan 17 16:11:17 2012 ++[reply_log] returns ok ++? if (( Realm == "iscte.pt" ) || ( Realm == "teste.iscte.pt" ) ) ?? Evaluating (Realm == "iscte.pt" ) -> FALSE ?? Evaluating (Realm == "teste.iscte.pt" ) -> FALSE ++? if (( Realm == "iscte.pt" ) || ( Realm == "teste.iscte.pt" ) ) -> FALSE } # server inner-tunnel Sending Access-Accept of id 8 to 127.0.0.1 port 28963 EAP-Message = 0x03080004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "iscte(a)roam.fccn.pt" MS-MPPE-Send-Key = 0xfe03b8a74cc7a26485b4ef6dd8efd958b3eb6cf60f2cc725380ec3248b720aef MS-MPPE-Recv-Key = 0xe7aad772cb0fab278c9a9a466f502dd4b8e1833c9b1166a4c5fe145284f2ad48 Finished request 8. Going to the next request Waking up in 4.4 seconds. ^C radius2:~#

2 1

Freeradius & vpn issue
by Guillermo Bayon del Oso 17 Jan '12

17 Jan '12

Hello! Could someone please kindly help me with a Freeradius & VPN issue? Any help would be very appreciated! I'm a non native speaker, so please accept my apologies if I'm not totally clear with my language. It's an issue with a net equipment that implements VPN connections and an the authentication server (implemented with Freeradius). We work with several software providers who connect with our Intranet through the VPN, in order to make their web applications maintenance tasks. The clients are connected without problems for a long period of time during the night. But eventually the Freeradius (or vpn appliance, we don't know for certain) suddently disconnect the clients from the VPN during the next day in the morning (when our partners are working). Actually several times (maybe 6 times). They should login again (via automated pppd script and a watchdog). This watchdog also tries to keep open the VPN and if it's not open, it tries to reconnect the VPN again (like a heartbeat). The error we've seen in the log (we've used radmin and raddebug tools) is: "Acct-Terminate-Cause = 0" But in the Radius Accounting RFC (http://freeradius.org/rfc/rfc2866.html) this value is not permitted (possible values are 1-18). This is a piece of log, where you can see when a client disconnect from the vpn: Mon Jan 16 09:19:54 2012 Acct-Session-Id = "<sess_id_num>" Tunnel-Server-Endpoint:0 = "<IP_1>" Tunnel-Client-Endpoint:0 = "<IP_2>" Tunnel-Assignment-Id:0 = "PPTP" Framed-Protocol = PPP Framed-IP-Address = <IP_3> User-Name = "<usr_name>" Acct-Authentic = RADIUS Acct-Terminate-Cause = 0 Acct-Session-Time = 125159 Acct-Input-Octets = 1312452 Acct-Output-Octets = 2391455 Acct-Input-Packets = 19372 Acct-Output-Packets = 25170 Acct-Status-Type = Stop NAS-Port-Type = Virtual NAS-Port = 323 Service-Type = Framed-User NAS-IP-Address = <IP_4> Acct-Delay-Time = 0 Huntgroup-Name = "PPTP" Acct-Unique-Session-Id = "<acct_sess_id>" Stripped-User-Name = "<usr_name>" Realm = "NULL" Timestamp = 1326701994 Request-Authenticator = Verified <sess_id_num>, <acct_sess_id>, <IP_x> and <usr_name> aren't real values (they're masked for privacy) although I think the error isn't related to them. Thank you very much in advance!! Guillermo. --- Guillermo Bayon del Oso <guillermo_bayon(a)yahoo.com>

2 1

EAP-session did no finish! (Linux)
by Alberto Martínez 17 Jan '12

17 Jan '12

Hi. I'm having a hard time migrating FR from one server to another. It worked perfectly on the former and I was able to make an EAP-PEAP-MSCHAPV2 auth from both Linux and Windows. Now I'm stuck with this known error: WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0xcb306879cb32715a did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! while trying to authenticate from Windows *and Linux*. I can't find the problem, since the configuration is almost identical to the working one. I would appreciate any indication about the issue. Thank you in advance. freeradius -XC > http://pastebin.com/p6FKumjm -- Alberto Martínez Setién Servicio Informático Universidad de Deusto Avda. de las Universidades, 24 48007 - Bilbao (SPAIN) Phone: +34 - 94 413 90 00 Ext 2684 Fax: +34 - 94 413 91 01

8 25

impossible to be authenticated
by ousmane sanogo 17 Jan '12

17 Jan '12

Hello Please i use radius with captival portal, but i can't autheticated. i have this message : pepperspot[2939]: redir.c: 1397: Radius request timed out what does this mean?

4 4

Re: Only "Out-of-tunnel"
by Alan Buxey 16 Jan '12

16 Jan '12

Where's the log for when this happens? As MAC auth wouldn't go through EAP tunnel it would suggest that some entry in eg users file is coming into play... alan

1 0

Only "Out-of-tunnel"
by Sergio Belkin 16 Jan '12

16 Jan '12

Hi, I've found some user and its mac address with OK status ( I mean Access-Accept) who only are logs about "out-of-tunnel". I wonder why could this happen... Please could you help me? This is my config, thanks in advance! FreeRADIUS Version 2.1.1, for host x86_64-unknown-linux-gnu, built on Oct 21 2008 at 15:14:37 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/files.backup including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/sql.conf including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf including configuration file /usr/local/etc/raddb/sql/mysql/counter.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/status including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default.backup including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel-peap group = radiusd user = radiusd including dictionary file /usr/local/etc/raddb/dictionary main { prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = yes auth = yes auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client spectrum { require_message_authenticator = no secret = "testing123" shortname = "spectrum.sarlanga.edu" } client 10.129.100.1 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-PB" } client 10.129.10.1 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-SS" } client 10.129.11.1 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-1" } client 10.129.111.1 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-1" } client 10.129.12.1 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-2" } client 10.129.13.1 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-3" } client 10.129.14.1 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-4" } client 10.129.199.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "PIVOT" } client 10.129.254.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "Transitional" } client 10.129.15.1 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-5" } client 10.129.60.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-Sociales-0" } client 10.129.0.61 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-Sociales-I" } client 10.129.158.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-SS" } client 10.129.80.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-PB" } client 10.128.255.81 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-I" } client 10.129.81.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-I" } client 10.128.255.82 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-II" } client 10.129.82.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-II" } client 10.128.250.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-Bridge" } client 10.128.255.172 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-I_bis_test" } client 10.128.255.83 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-III" } client 10.129.83.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-III" } client 10.128.255.84 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-IV" } client 10.129.84.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-IV" } client 10.128.255.181 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-I_bis" } client 10.129.181.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-I_bis" } client 10.129.162.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-I_bis_2" } client 10.128.255.86 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-VI" } client 10.129.86.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-VI" } client 10.128.255.87 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-VII" } client 10.129.87.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-VII" } client 10.129.187.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-VII-Derecho" } client 10.129.99.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-Pivot" } client 10.129.52.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PV-PB" } client 10.128.255.85 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-V" } client 10.129.85.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-V" } client 10.129.189.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-IX-HD" } client 10.129.88.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-VIII" } client 10.129.89.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "oficina-test" } client 10.129.160.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-Sociales-Auditorio" } client 10.129.182.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-X" } client 192.168.2.53 { require_message_authenticator = no secret = "akantilad0-Green-22" shortname = "sarlanga3" } client 192.168.45 { require_message_authenticator = no secret = "sarlangalad0-black-54" shortname = "sarlanga4" } client 192.168.3.201 { require_message_authenticator = no secret = "sarlangalad0-blue-246692" shortname = "sarlanga7" } client 192.168.4 { require_message_authenticator = no secret = "L0tusNot4as" shortname = "AP-sarlanga7" } client 192.168.142.240 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-Cabre-1" } client 192.168.142.241 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-Cabre-2" } client 192.168.142.242 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-Cabre-3" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server status { modules { Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_always Module: Instantiating ok always ok { rcode = "ok" simulcount = 0 mpp = no } } } server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = yes } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_ldap Module: Instantiating ldap ldap { server = "ldap.sarlanga.edu" port = 636 password = "sarlanga" identity = "cn=freeradius,ou=applications,dc=sarlanga,dc=edu" net_timeout = 10 timeout = 120 timelimit = 30 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no cacertfile = "/etc/raddb/cacert.pem" randfile = "/dev/urandom" require_cert = "demand" } basedn = "ou=people,dc=sarlanga,dc=edu" filter = "(uid=%u)" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr = "radiusAllowed" access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/usr/local/etc/raddb/ldap.attrmap" ldap_debug = 40 ldap_connections_number = 15 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /usr/local/etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusPassword mapped to RADIUS Cleartext-Password conns: 0x6fc6cb0 Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "ttls" timer_expire = 600 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/pki/tls/certs/ips-spectrum-key.pem" certificate_file = "/etc/pki/tls/certs/spectrum.sarlanga.edu.cer" CA_file = "/etc/pki/tls/certs/IPS-IPSCABUNDLE.crt" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" cache { enable = yes lifetime = 6 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel-peap" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating post_proxy_log detail post_proxy_log { detailfile = "/usr/local/var/log/radius/radacct/postproxy/%{Client-IP-Address}/post-proxy-detail-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Checking post-auth {...} for more modules to load Module: Instantiating reply_log detail reply_log { detailfile = "/usr/local/var/log/radius/radacct/replies/%{Client-IP-Address}/reply-detail-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } } server inner-tunnel-peap { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } } modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Instantiating auth_log detail auth_log { detailfile = "/usr/local/var/log/radius/radacct/requests/%{Client-IP-Address}/auth-detail-%{NAS-Identifier}-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Instantiating detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 192.168.1.5 port = 0 } listen { type = "acct" ipaddr = 192.168.1.5 port = 0 } listen { type = "status" ipaddr = 127.0.0.1 port = 18120 client admin { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "YellowSubmarine" } } Listening on authentication address 192.168.1.5 port 1812 Listening on accounting address 192.168.1.5 port 1813 Listening on status address 127.0.0.1 port 18120 as server status Ready to process requests. -- -- Sergio Belkin http://www.sergiobelkin.com Watch More TV http://sebelk.blogspot.com LPIC-2 Certified - http://www.lpi.org

1 0

RADIUS & Billing for MVTS
by Mohamed Daif 16 Jan '12

16 Jan '12

Hello, I have installed two servers with MVTS PRO installed on both servers , supports 600 concurrent calls. and i need install one server with FreeRADIUS to manage both servers and billing . and i have some needs must to be in the FreeRADIUS to manage the calls . all calls must be checked firstly from two tables then go to Specific Gateways like below : 1 - BlackList : to block calls to numbers from the BlackList table , 2 - WhiteList : to send calls to numbers from the WhiteList table to White Gateways 3 - Other calls not stored in both tables must be send to Checking Gateways . 4 - if calls have a good CDR must be storing in WhiteList . 5 - other calls have a bad CDR must be storing in BlackList . I want to have free choice for activate checking from both tables or one of both tables or don't check any tables for each client individually. -- *Best Regards Mohamed Daif*

1 0

Re: compiling freeradius 2.1.12 in Debian squeeze
by Rui Ribeiro 16 Jan '12

16 Jan '12

Indeed just found configure make works fine; been the whole time trying to build a deb package. fakeroot dpkg-buildpackage -b -uc doesn't work. Compiling them would be enough for you. I doubt a ubuntu deb package will satisfy debian dependencies. Best regards, Rui -- Fajar On Sun, Jan 15, 2012 at 1:56 AM, Rui Ribeiro <[hidden email]> wrote: >> >> Hi list, >> >> Been trying to compile freeradius 2.1.12 in Debian Squeeze following the directions of http://wiki.freeradius.org/Build to no avail. Also tried the suggestion in previous posts of cutting out --enable-developer, and of compiling libtool myself. >And the error is ... ? >> One of the problems is freeradius is expecting ltdl 3.x, and squeeze has 7; >That shouldn't cause a problem. FR can use both it's included (3.x) >and systems's libltdl. >> the other is that the file changelog is no more in the right format. (tough the last one is easily fixed) >> >> Has anyone managed to compile freeradius in Debian 6.x? > >It compiles in ubuntu just fine. >Or you can use my ppa. Lucid's packages might also work (untested) on >debian: https://launchpad.net/~freeradius/+archive/stable > >-- >Fajar

3 2

merging two systems
by Blake Hudson 16 Jan '12

16 Jan '12

I have two systems that both use freeradius out of MySQL. I would like to consolidate onto a single system, but maintain the database separation to ensure there are no username collisions and ease in auditing/reporting, etc. System A already has a database of freeradius_A and system B has a database of freeradius_B. What is the preferred method to configure freeradius to authenticate two sets of users out of two databases? Should I look at running multiple instances of freeRADIUS or can I utilize both databases with one instance? --Blake

3 4

(no subject)
by McSparin, Joe 16 Jan '12

16 Jan '12

Is There a way to add the removal of delimiters such as "-" or ":" to the rewrite_calling_station_id section. Thanks, Joe -- This email message and any attachments are for the sole use of the intended recipient(s) and contain confidential and/or privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message and any attachments.

2 2